BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

11328 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

2011

PIONEER TESTING LABORATORY PRIVATE LIMITED

8176806

IS 710 (2024)

MARINE PLYWOOD - SPECIFICATION (Third Revision)

All Type

15450 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Timber)	-	750	-
Cl-4.2(Adhesive)	-	750	-
Cl-5.1(Veneers)	-	750	-
Cl-5.2.1(Glueing)	-	750	-
Cl -5.2.2(Thickness of Veneers)	-	750	-
Cl - 5.2.3.1(Joint in Veneers)	-	750	-
Cl - 5.2.3.2(Edge joints)	-	750	-
Cl - 5.2.3.3(End joints)	-	750	-
Cl - 5.2.3.4(Scarf joints)	-	750	-
Cl - 5.2.4(Grain Direction)	-	750	-
Cl-5.3(Treatment)	-	750	-
Cl-5.4(Moisture Content)	-	750	-
Cl-6.1(Dimensions (length))	-	750	-
Cl-6.2(Thickness)	-	750	-
Cl-6.3(Squareness)	-	750	-
Cl-7.1, 7.2, 7.3, 7.4, 7.5 & 7.6(Workmanship and finish)	-	750	-
Cl-9.3(Moisture Content)	-	750	-
Cl-9.4.2(Glue Adhesion in Dry State- Adhesion of Plies)	-	750	-
Cl-9.4.1(Glue Adhesion in Dry State- Glue Shear Strength -Average)	-	1500	-
Cl-9.5.1.1(Glue Adhesion in Water Resistance - Glue Shear Strength -Average)	-	1500	-
Cl-9.5.1.2(Water Resistance Test-Adhesion of plies)	-	750	-
Cl-9.5.2(Water Resistance Test)	-	750	-
Cl-9.6(Tensile Strength-Along the grain)	-	1200	-
Cl-9.7(Mycological Test -Adhesion)	-	1200	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	1500	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	1500	-
Cl-9.9, Table-3 (i) a(Wet Bending Strength- Modulus of Elasticity (MOE)- Average)	-	1500	-
Cl-9.9, Table-3 (i) b(Wet Bending Strength- Modulus of Elasticity (MOE),-Minimum individual)	-	1500	-
Cl-9.10(Retention of Preservative)	-	1500	-
Cl-9.11(Formaldehyde Content Test)	-	1500	-
Cl-9.12(Steady-State Formaldehyde Emission Test)	-	1500	-
Cl-9.4.2(Adhesion of Plies)	-	750	-
5.1.1(Defects in veneers)	-	750	-
Cl-4.1(Timber)	-	0	-
Cl-4.2(Adhesive)	-	8500	-
Cl-5.1(Veneers)	-	2500	-
Cl-5.2.1(Glueing)	-	0	-
Cl -5.2.2(Thickness of Veneers)	-	500	-
Cl - 5.2.3.1(Joint in Veneers)	-	0	-
Cl - 5.2.3.2(Edge joints)	-	0	-
Cl - 5.2.3.3(End joints)	-	0	-
Cl - 5.2.3.4(Scarf joints)	-	0	-
Cl - 5.2.4(Grain Direction)	-	0	-
Cl-5.3(Treatment)	-	0	-
Cl-5.4(Moisture Content)	-	500	-
Cl-6.1(Dimensions (length))	-	1500	-
Cl-6.2(Thickness)	-	750	-
Cl-6.3(Squareness)	-	750	-
Cl-7.1, 7.2, 7.3, 7.4, 7.5 & 7.6(Workmanship and finish)	-	500	-
Cl-9.3(Moisture Content)	-	500	-
Cl-9.4.2(Glue Adhesion in Dry State- Adhesion of Plies)	-	750	-
Cl-9.4.1(Glue Adhesion in Dry State- Glue Shear Strength -Average)	-	750	-
Cl-9.5.1.1(Glue Adhesion in Water Resistance - Glue Shear Strength -Average)	-	1000	-
Cl-9.5.1.2(Water Resistance Test-Adhesion of plies)	-	1000	-
Cl-9.5.2(Water Resistance Test)	-	1000	-
Cl-9.6(Tensile Strength-Along the grain)	-	800	-
Cl-9.7(Mycological Test -Adhesion)	-	1000	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	1200	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	1200	-
Cl-9.9, Table-3 (i) a(Wet Bending Strength- Modulus of Elasticity (MOE)- Average)	-	1200	-
Cl-9.9, Table-3 (i) b(Wet Bending Strength- Modulus of Elasticity (MOE),-Minimum individual)	-	1200	-
Cl-9.10(Retention of Preservative)	-	1500	-
Cl-9.11(Formaldehyde Content Test)	-	2500	-
Cl-9.12(Steady-State Formaldehyde Emission Test)	-	2500	-
Cl-9.4.2(Adhesion of Plies)	-	8500	-
5.1.1(Defects in veneers)	-	2500	-

10 Mar, 2027

-
Included w.e.f 20.05.2025

2012

POWERONIC TEST & RESEARCH CENTRE PRIVATE LIMITED

8170206

IS 302 : Part 1 (2024)

Household and Similar Electrical Appliances â Safety Part 1 General Requirements (Seventh Revision)

Rated Voltage Being Not more then 250 V for single - phase appliances and 480 V for Other Appliances Including Direct Current (DC) Supplied appliances and Battery Operated appliances

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification)	-	1000	20% Discount TO BIS
5(General conditions for the tests)	-	500	20% Discount TO BIS
11.8(Temperature rise)	-	1000	20% Discount TO BIS
11.7(Duration corresponding)	-	1000	20% Discount TO BIS
11.6(Combined appliances)	-	1000	20% Discount TO BIS
11.5(Motor-operated appliances)	-	1200	20% Discount TO BIS
11.4(Heating appliances)	-	900	20% Discount TO BIS
8.1.5(Live parts of built-in appliances)	-	1000	20% Discount TO BIS
18(Endurance)	-	500	20% Discount TO BIS
17(Overload protection of transformers and associated circuits)	-	1000	20% Discount TO BIS
16(Leakage current and electric strength)	-	1000	20% Discount TO BIS
4(General requirement)	-	500	20% Discount TO BIS
32(Radiation Toxicity and Similar Hazards)	-	1000	20% Discount TO BIS
30.2(Needle Flame Test)	-	1000	20% Discount TO BIS
30.2(Glow Wire Test)	-	1000	20% Discount TO BIS
30.1(Ball pressure test)	-	1000	20% Discount TO BIS
29(clearance, creepage distances and solid insulation)	-	1000	20% Discount TO BIS
28(Screw test and connections)	-	1000	20% Discount TO BIS
27(Provision for earthing)	-	1000	20% Discount TO BIS
26(Terminals for external conductors)	-	1000	20% Discount TO BIS
25(Supply connection and external flexible cords)	-	1000	20% Discount TO BIS
24(Components)	-	1000	20% Discount TO BIS
23(Internal wiring)	-	1000	20% Discount TO BIS
22(Construction)	-	1000	20% Discount TO BIS
20(Stability and mechanical hazards)	-	1000	20% Discount TO BIS
19(Abnormal Operation)	-	1000	20% Discount TO BIS
18(Endurance)	-	500	20% Discount TO BIS
17(Over Load Protection of Transformers and associated circuits)	-	1000	20% Discount TO BIS
16.1(General)	-	500	20% Discount TO BIS
16.0(General)	-	500	20% Discount TO BIS
15.3(Humidity Test)	-	1000	20% Discount TO BIS
15.2(Spillage Test)	-	1000	20% Discount TO BIS
15.1(Ingress Protection test other than IPX0 (IP test))	-	1000	20% Discount TO BIS
15.0(Moisture resistance)	-	1000	20% Discount TO BIS
14(Transient Over Voltages)	-	1000	20% Discount TO BIS
13.3(Electric Strength at operating temperature)	-	1000	20% Discount TO BIS
13.2(Leakage current at operating temperature)	-	1000	20% Discount TO BIS
13(Leakage current and electric strength at operating temperature)	-	1000	20% Discount TO BIS
11.3(Heating)	-	1000	20% Discount TO BIS
11.2(General)	-	500	20% Discount TO BIS
11.1(General)	-	500	20% Discount TO BIS
10.1(Power input)	-	1000	20% Discount TO BIS
9(Starting of motor operation test requirements and tests)	-	1000	20% Discount TO BIS
8.1.4(Protection against live parts against protective impedance)	-	1000	20% Discount TO BIS
8.1.3(Protection against live parts in visible glowing heating elements)	-	1000	20% Discount TO BIS
7(Marking and instructions)	-	500	20% Discount TO BIS
A.2(Earth continuity test)	-	1000	20% Discount TO BIS
Annex C(Ageing test on motors)	-	1000	20% Discount TO BIS
Annex D(Thermal motor protectors)	-	1000	20% Discount TO BIS
15.2(Moisture resistance)	-	1000	20% Discount TO BIS
19.17(Abnormal operation)	-	1000	20% Discount TO BIS
20.1(Stability and mechanical hazards)	-	1000	20% Discount TO BIS
22.5(Construction)	-	1000	20% Discount TO BIS
22.6(Construction)	-	1000	20% Discount TO BIS
22.11(Construction)	-	1000	20% Discount TO BIS
22.16(Construction)	-	1000	20% Discount TO BIS
22.32(Construction)	-	1000	20% Discount TO BIS
22.42(Construction)	-	1000	20% Discount TO BIS
23.3(Internal wiring)	-	1000	20% Discount TO BIS
25(Supply connection and external flexible cords)	-	1000	20% Discount TO BIS
25.7(Supply connection and external flexible cords)	-	1000	20% Discount TO BIS
25.14(Supply connection and external flexible cords)	-	1000	20% Discount TO BIS
25.15(Supply connection and external flexible cords)	-	1000	20% Discount TO BIS
26.5(Terminals for external conductors)	-	1000	20% Discount TO BIS
27.5(Provision for earthing)	-	1000	20% Discount TO BIS
28.1(Screws and connections)	-	1000	20% Discount TO BIS
B.22.1(Construction)	-	1000	20% Discount TO BIS
B.22.3(Construction)	-	1000	20% Discount TO BIS
B.22.4(Construction)	-	1000	20% Discount TO BIS
B.22.5(Construction)	-	1000	20% Discount TO BIS
8.1.1(Protection against live parts in all positions)	-	1000	20% Discount TO BIS
10.2(Current input)	-	1000	20% Discount TO BIS
16.2(Leakage Current (after Clause 15))	-	1000	20% Discount TO BIS
16.3(Electric Strength (after clause 15 and 16.2))	-	1000	20% Discount TO BIS
31(Resistance to Rusting)	-	1000	20% Discount TO BIS
21(Mechanical Strength)	-	1000	20% Discount TO BIS
8.1.2(Protection against live parts in openings)	-	1000	20% Discount TO BIS
21.2(Mechanical strength)	-	1000	20% Discount TO BIS
21.3(Mechanical strength)	-	1000	20% Discount TO BIS
6(Classification)	-	0	-
5(General conditions for the tests)	-	0	-
11.8(Temperature rise)	-	0	-
11.7(Duration corresponding)	-	0	-
11.6(Combined appliances)	-	0	-
11.5(Motor-operated appliances)	-	0	-
11.4(Heating appliances)	-	0	-
8.1.5(Live parts of built-in appliances)	-	0	-
18(Endurance)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	-
16(Leakage current and electric strength)	-	0	-
4(General requirement)	-	0	-
32(Radiation Toxicity and Similar Hazards)	-	0	-
30.2(Needle Flame Test)	-	0	-
30.2(Glow Wire Test)	-	0	-
30.1(Ball pressure test)	-	0	-
29(clearance, creepage distances and solid insulation)	-	0	-
28(Screw test and connections)	-	0	-
27(Provision for earthing)	-	0	-
26(Terminals for external conductors)	-	0	-
25(Supply connection and external flexible cords)	-	0	-
24(Components)	-	0	-
23(Internal wiring)	-	0	-
22(Construction)	-	0	-
20(Stability and mechanical hazards)	-	0	-
19(Abnormal Operation)	-	0	-
18(Endurance)	-	0	-
17(Over Load Protection of Transformers and associated circuits)	-	0	-
16.1(General)	-	0	-
16.0(General)	-	0	-
15.3(Humidity Test)	-	0	-
15.2(Spillage Test)	-	0	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	0	-
15.0(Moisture resistance)	-	0	-
14(Transient Over Voltages)	-	0	-
13.3(Electric Strength at operating temperature)	-	0	-
13.2(Leakage current at operating temperature)	-	0	-
13(Leakage current and electric strength at operating temperature)	-	0	-
11.3(Heating)	-	0	-
11.2(General)	-	0	-
11.1(General)	-	0	-
10.1(Power input)	-	0	-
9(Starting of motor operation test requirements and tests)	-	0	-
8.1.4(Protection against live parts against protective impedance)	-	0	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	0	-
7(Marking and instructions)	-	0	-
A.2(Earth continuity test)	-	0	-
Annex C(Ageing test on motors)	-	0	-
Annex D(Thermal motor protectors)	-	0	-
15.2(Moisture resistance)	-	0	-
19.17(Abnormal operation)	-	0	-
20.1(Stability and mechanical hazards)	-	0	-
22.5(Construction)	-	0	-
22.6(Construction)	-	0	-
22.11(Construction)	-	0	-
22.16(Construction)	-	0	-
22.32(Construction)	-	0	-
22.42(Construction)	-	0	-
23.3(Internal wiring)	-	0	-
25(Supply connection and external flexible cords)	-	0	-
25.7(Supply connection and external flexible cords)	-	0	-
25.14(Supply connection and external flexible cords)	-	0	-
25.15(Supply connection and external flexible cords)	-	0	-
26.5(Terminals for external conductors)	-	0	-
27.5(Provision for earthing)	-	0	-
28.1(Screws and connections)	-	0	-
B.22.1(Construction)	-	0	-
B.22.3(Construction)	-	0	-
B.22.4(Construction)	-	0	-
B.22.5(Construction)	-	0	-
8.1.1(Protection against live parts in all positions)	-	0	-
10.2(Current input)	-	0	-
16.2(Leakage Current (after Clause 15))	-	0	-
16.3(Electric Strength (after clause 15 and 16.2))	-	0	-
31(Resistance to Rusting)	-	0	-
21(Mechanical Strength)	-	0	-
8.1.2(Protection against live parts in openings)	-	0	-
21.2(Mechanical strength)	-	0	-
21.3(Mechanical strength)	-	0	-

11 Apr, 2028

-
Included w.e.f 23.01.2025 Excluded : Cl 19.11.4.1 - Cl 19.11.4.7, Cl 12 (Charging of metal-ion batteries)

2013

PIONEER TESTING LABORATORY PRIVATE LIMITED

8176806

IS 303 (2024)

Plywood for General Purposes â Specification (Fourth Revision)

All Type

10450 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Classification by appearance)	-	300	-
Cl-5.2, Table- 1 (i)(Blister)	-	300	-
Cl-5.2, Table- 1 (ii)(Checks)	-	300	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	300	-
Cl-5.2, Table- 1 (iv)(Dote)	-	300	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	300	-
Cl-5.2, Table- 1 (vi)(Joints)	-	300	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	300	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	300	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	300	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	300	-
Cl-5.2, Table- 1 (xi)(Patches)	-	300	-
Cl-5.2, Table- 1 (xii)(Splits)	-	300	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	300	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	300	-
Cl-6.1(Timber)	-	300	-
Cl-6.2(Adhesive)	-	300	-
Cl-7.2.1(Thickness of veneers)	-	300	-
Cl-7.2.3(Grain Direction)	-	300	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	300	-
Cl-7.2.5.2(Splits)	-	300	-
Cl-7.2.5.3(Overlap)	-	300	-
Cl-8.1(Dimensions -length)	-	700	-
Cl-8.2(Thickness of the plywood boards)	-	300	-
Cl-8.3(Squareness)	-	700	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	1000	-
Cl-11.3.2(Mycological Test)	-	1500	-
Cl-11.4(Moisture Content)	-	500	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	1500	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	1500	-
Cl-11.6(Formaldehyde Content Test)	-	2000	-
Cl-11.7(Steady-State Formaldehyde Emission Test)	-	2000	-
Cl-9(WORKMANSHIP AND FINISH)	-	300	-
Cl-7.2.4(Scarf Joints)	-	300	-
Cl-5.1(Classification by appearance)	-	200	-
Cl-5.2, Table- 1 (i)(Blister)	-	200	-
Cl-5.2, Table- 1 (ii)(Checks)	-	200	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	200	-
Cl-5.2, Table- 1 (iv)(Dote)	-	200	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	200	-
Cl-5.2, Table- 1 (vi)(Joints)	-	200	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	200	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	200	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	200	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	200	-
Cl-5.2, Table- 1 (xi)(Patches)	-	200	-
Cl-5.2, Table- 1 (xii)(Splits)	-	200	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	200	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	0	-
Cl-6.1(Timber)	-	0	-
Cl-6.2(Adhesive)	-	8500	-
Cl-7.2.1(Thickness of veneers)	-	300	-
Cl-7.2.3(Grain Direction)	-	200	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	200	-
Cl-7.2.5.2(Splits)	-	200	-
Cl-7.2.5.3(Overlap)	-	200	-
Cl-8.1(Dimensions -length)	-	600	-
Cl-8.2(Thickness of the plywood boards)	-	300	-
Cl-8.3(Squareness)	-	750	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	1000	-
Cl-11.3.2(Mycological Test)	-	1500	-
Cl-11.4(Moisture Content)	-	750	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	750	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	750	-
Cl-11.6(Formaldehyde Content Test)	-	2500	-
Cl-11.7(Steady-State Formaldehyde Emission Test)	-	2500	-
Cl-9(WORKMANSHIP AND FINISH)	-	500	-
Cl-7.2.4(Scarf Joints)	-	0	-

10 Mar, 2027

-
Included w.e.f 20.05.2025

2014

MSME TESTING CENTER

7186204

IS 6956 (2001)

Cover paper - Specification (First Revision)

15175 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.3(Grarnmage-As per 6 of IS 1060 (Part 1)-Further a mean of 10 test results shall not vary from nominal grarnmage by more than ±4 percent.)	-	900	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.3(Grarnmage-As per 6 of IS 1060 (Part 1)- no single test result shall vary by more than *6 percent from nominal)	-	900	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.2,Table1 (One minute Cobb test (Test method Column 4 and 5 of table1))	-	1000	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.2,Table1 (Smoothness (Bendtsen)-(Test method Column 4 and 5 of table1))	-	900	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.2,Table1 (Burst Index-(Test method Column 4 and 5 of table1))	-	1400	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.2,Table1 (Ph(Test method Column 4 and 5 of table1))	-	900	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.2,Table1 (Folding endurance-MD-(Test method Column 4 and 5 of table1))	-	675	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.2,Table1 (Folding endurance-CD-(Test method Column 4 and 5 of table1))	-	675	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.2,Table1 (Tensile Index-CD(Test method Column 4 and 5 of table1))	-	2000	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.2,Table1 (Tensile Index-MD(Test method Column 4 and 5 of table1))	-	2000	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.2,Table1 (Brightness(For white paper only) -(Test method Column 4 and 5 of table1))	-	775	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.2,Table1 (Opacity, (Test method Column 4 and 5 of table1))	-	2000	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.2,Table1 (Bending stiffness index,-CD-(Test method Column 4 and 5 of table1))	-	775	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.2,Table1 (Bending stiffness index,-MD-(Test method Column 4 and 5 of table1))	-	775	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.1(REQUIREMENTS-General)	-	600	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.2,Table1 (Wax pick-(Test method Column 4 and 5 of table1))	-	1150	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.4.1.1(Additional Requirements for ECO-Mark)	-	900	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.4.3(Product Specific Requirements)	-	600	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.4.4(Product Specific Requirements)	-	600	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.3(Grarnmage-As per 6 of IS 1060 (Part 1)-Further a mean of 10 test results shall not vary from nominal grarnmage by more than ±4 percent.)	-	900	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.3(Grarnmage-As per 6 of IS 1060 (Part 1)- no single test result shall vary by more than *6 percent from nominal)	-	900	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.2,Table1 (One minute Cobb test (Test method Column 4 and 5 of table1))	-	1000	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.2,Table1 (Smoothness (Bendtsen)-(Test method Column 4 and 5 of table1))	-	900	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.2,Table1 (Burst Index-(Test method Column 4 and 5 of table1))	-	1400	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.2,Table1 (Ph(Test method Column 4 and 5 of table1))	-	900	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.2,Table1 (Folding endurance-MD-(Test method Column 4 and 5 of table1))	-	675	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.2,Table1 (Folding endurance-CD-(Test method Column 4 and 5 of table1))	-	675	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.2,Table1 (Tensile Index-CD(Test method Column 4 and 5 of table1))	-	2000	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.2,Table1 (Tensile Index-MD(Test method Column 4 and 5 of table1))	-	2000	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.2,Table1 (Brightness(For white paper only) -(Test method Column 4 and 5 of table1))	-	775	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.2,Table1 (Opacity, (Test method Column 4 and 5 of table1))	-	2000	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.2,Table1 (Bending stiffness index,-CD-(Test method Column 4 and 5 of table1))	-	775	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.2,Table1 (Bending stiffness index,-MD-(Test method Column 4 and 5 of table1))	-	775	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.1(REQUIREMENTS-General)	-	600	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.2,Table1 (Wax pick-(Test method Column 4 and 5 of table1))	-	1150	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.4.3(Product Specific Requirements)	-	600	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.4.4(Product Specific Requirements)	-	600	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.3(Grarnmage-As per 6 of IS 1060 (Part 1)-Further a mean of 10 test results shall not vary from nominal grarnmage by more than ±4 percent.)	-	900	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.3(Grarnmage-As per 6 of IS 1060 (Part 1)- no single test result shall vary by more than *6 percent from nominal)	-	900	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.2,Table1 (One minute Cobb test (Test method Column 4 and 5 of table1))	-	1000	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.2,Table1 (Smoothness (Bendtsen)-(Test method Column 4 and 5 of table1))	-	900	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.2,Table1 (Burst Index-(Test method Column 4 and 5 of table1))	-	1400	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.2,Table1 (Ph(Test method Column 4 and 5 of table1))	-	900	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.2,Table1 (Folding endurance-MD-(Test method Column 4 and 5 of table1))	-	675	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.2,Table1 (Folding endurance-CD-(Test method Column 4 and 5 of table1))	-	675	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.2,Table1 (Tensile Index-CD(Test method Column 4 and 5 of table1))	-	2000	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.2,Table1 (Tensile Index-MD(Test method Column 4 and 5 of table1))	-	2000	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.2,Table1 (Brightness(For white paper only) -(Test method Column 4 and 5 of table1))	-	775	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.2,Table1 (Opacity, (Test method Column 4 and 5 of table1))	-	2000	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.2,Table1 (Bending stiffness index,-CD-(Test method Column 4 and 5 of table1))	-	775	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.2,Table1 (Bending stiffness index,-MD-(Test method Column 4 and 5 of table1))	-	775	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.1(REQUIREMENTS-General)	-	900	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.2,Table1 (Wax pick-(Test method Column 4 and 5 of table1))	-	1150	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
Cl.4.1(Description)	-	600	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
Cl.4.3(Grammage)	-	900	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
Cl.4.2, Table-1(i)(pH)	-	900	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
Cl.4.2, Table-1(iia)(Tensile Index,MD)	-	2000	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
Cl.4.2, Table-1(iib)(Tensile Index,CD)	-	2000	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
Cl.4.2, Table-1(iii)(One minute cobb test)	-	1000	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
Cl.4.2, Table-1(iv)(Opacity)	-	2000	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
Cl.4.2, Table-1(v)(Brightness)	-	775	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
Cl.4.2, Table-1(vi)(Burst Index)	-	1400	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
Cl.4.2, Table-1(vii)(Wax pick)	-	1150	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
Cl.4.2, Table-1(viii)(Smoothness(Bendtsen))	-	900	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
Cl.4.2, Table-1(ixa)(Folding endurance,CD)	-	675	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
Cl.4.2, Table-1(ixb)(Folding endurance,MD)	-	675	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
Cl.4.2, Table-1(xa)(Bending stiffness index,CD)	-	775	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
Cl.4.2, Table-1(xb)(Bending stiffness index,MD)	-	775	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.4.1.1(Additional Requirements for ECO-Mark)	-	900	visual test
4.4.1.1(Additional Requirements for ECO-Mark)	-	900	visual test
4.4.4(Product Specific Requirements)	-	900	visual test

16 Jun, 2028

-
-

2015

MSME TESTING CENTER

7186204

IS 12766 (2023)

COMPUTER PAPER - SPECIFICATION

20225 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 3.1.1(Continuous Length)	-	900	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Clause 4.1(Paper Description)	-	900	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Clause 4.1.1(Grammage (Substance))	-	900	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Clause 4.1.2(Printing)	-	900	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Clause 4.2(Z-fold)	-	900	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Clause 4.3(Perforation)	-	900	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Feed hole diameter(As per Annex A)	-	900	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Clause 4.4(Feed hole to feed hole disance)	-	900	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Clause 4.4(Distance of Feed hole centre from the edge of the paper)	-	900	The general charges apply as stated above. However, Micro Enterprises receive a 25% concession on these charges, while small enterprises are eligible for a 10% concession.
Clause 4.5(Size)	-	575	The general charges apply as stated above. However, Micro Enterprises receive a 25% concession on these charges, while small enterprises are eligible for a 10% concession.
Clause 4.7, Table 1, s.no. (i)(As per IS 1060 (Part 5/Sec 3))	-	525	The general charges apply as stated above. However, Micro Enterprises receive a 25% concession on these charges, while small enterprises are eligible for a 10% concession.
Clause 4.7, Table 1, s.no. (ii)(Tensile index, CD)	-	2000	The general charges apply as stated above. However, Micro Enterprises receive a 25% concession on these charges, while small enterprises are eligible for a 10% concession.
Clause 4.7, Table 1, s.no. (ii)(Tensile index, MD)	-	2000	The general charges apply as stated above. However, Micro Enterprises receive a 25% concession on these charges, while small enterprises are eligible for a 10% concession.
Clause 4.7, Table 1, s.no. (iii)(Tear index, MD)	-	2000	The general charges apply as stated above. However, Micro Enterprises receive a 25% concession on these charges, while small enterprises are eligible for a 10% concession.
Clause 4.7, Table 1, s.no. (iii)(Tear index, CD)	-	2000	The general charges apply as stated above. However, Micro Enterprises receive a 25% concession on these charges, while small enterprises are eligible for a 10% concession.
Clause 4.7, Table 1, s.no. (iv)(Burst Index)	-	1400	The general charges apply as stated above. However, Micro Enterprises receive a 25% concession on these charges, while small enterprises are eligible for a 10% concession.
One minute Cobb test(As per IS 1060 (Part 5/Sec 4))	-	1000	The general charges apply as stated above. However, Micro Enterprises receive a 25% concession on these charges, while small enterprises are eligible for a 10% concession.
Brightness ISO(Brightness ISO)	-	775	The general charges apply as stated above. However, Micro Enterprises receive a 25% concession on these charges, while small enterprises are eligible for a 10% concession.
Clause 4.7, Table 1, s.no. (vii)(Opacity)	-	2000	The general charges apply as stated above. However, Micro Enterprises receive a 25% concession on these charges, while small enterprises are eligible for a 10% concession.
Clause 4.7, Table 1, s.no. (viii)(Moisture)	-	700	The general charges apply as stated above. However, Micro Enterprises receive a 25% concession on these charges, while small enterprises are eligible for a 10% concession.
Clause 4.7, Table 1, s.no. (ix)(Ash)	-	1150	The general charges apply as stated above. However, Micro Enterprises receive a 25% concession on these charges, while small enterprises are eligible for a 10% concession.
Clause 4.7, Table 1, s.no. (x)(Smoothness (Bendtsen) for both sides)	-	900	The general charges apply as stated above. However, Micro Enterprises receive a 25% concession on these charges, while small enterprises are eligible for a 10% concession.

16 Jun, 2028

-
-

2016

MSME TESTING CENTER

7186204

IS 1397 (2020)

Kraft Paper for Packing and Wrapping — Specification ( Third Revision )

20725 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4(Grade)	-	900	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges
Cl 5.2(Finish)	-	900	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl 5.3(Size)	-	575	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl 5.4(Substance)	-	900	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl 5.5 Table 1 S.No. i)(Moisture content,)	-	700	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl 5.5 Table 1 S.No.i i)(pH, Min)	-	900	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl 5.5 Table 1 S.No. iii)(Burst index )	-	1400	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl 5.5 Table 1 S.No. iv)(Tear index (each direction))	-	2000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl 5.5 Table 1 S.No. v)(Tensile index CD)	-	2000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl 5.5 Table 1 S.No. v)(Tensile index MD)	-	2000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl 5.5 Table 1 S.No. vi)(Folding endurance, CD)	-	675	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl 5.5 Table 1 S.No.vii)(Cobb value Front,, 60 sec 27°C)	-	1000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl 5.5 Table 1 S.No.vii)(Cobb value Back,, 60 sec 27°C)	-	1000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl 5.6 Table 2 S.No.i)(pH)	-	900	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl 5.6 Table 2 S.No.ii)(Ash)	-	1000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl 5.6 Table 2 S.No.iii)(Elongation at break, CD)	-	2000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl 5.6 Table 2 S.No.iii)(Elongation at break, MD)	-	2000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl 5.6 Table 2 S.No.ii)(Elongation at break, CD)	-	2000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
5, 5.1, 5.1.1 (Requirements- Materials (Grade 1))	-	900	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
5, 5.1, 5.1.2(Requirements- Materials (Grade 2))	-	900	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
5, 5.1, 5.1.3(Requirements- Materials (Grade 3))	-	900	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
5.2, 5.2.1(Finish (Grade 1) )	-	900	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
5.2, 5.2.2(Finish (Grade 2) )	-	900	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
5.2, 5.2.3(Finish (Grade 3) )	-	900	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
5.3(Size)	-	575	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
5.4(Substance)	-	900	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
5.5(Requirements )	-	600	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
5.6(Optional Requirements )	-	600	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
6, 6.3, 6.3.1(Marking- Each package and roll shall be marked with the following information)	-	600	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
6, 6.3, 6.3.2(Marking- Each package and roll shall be marked with the following information)	-	600	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
6.4(BIS Certification Marking )	-	900	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
8(Tests)	-	20725	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.

16 Jun, 2028

-
-

2017

Elutech Laboratory and Calibration Services

9179806

IS 15658 (2021)

Concrete Paving Blocks - Specification ( First Revision )

All Grade, Size. Both Single and Double Layer

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 50 cycles)	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 25 cycles)	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 10 cycles)	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Cumulative Weight losses of specimen after 10, 25 & 50 cycles)	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 50 cycles)	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 25 cycles)	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 10 cycles)	-	0	-
Clause 7.3, Annex G(Average Breaking Load)	-	12500	-
Clause 7.3, Annex G(Individual Breaking Load)	-	12500	-
Clause 7.3, Annex F(Average Failure Load per unit Length)	-	12500	-
Clause 7.3, Annex F(Individual Failure Load per unit Length)	-	12500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (v) b)(Average Flexural strength )	-	12500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (v) a)(Indivdual Flexural strength )	-	12500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) b)(Average Tensile splitting strength )	-	12500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) a)(Indivdual Tensile splitting strength )	-	12500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) ii)(Wet Abrasion resistance (Average of three test specimens))	-	12500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) i)( Indivdual Wet Abrasion Resistance )	-	12500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) ii)(Dry Abrasion resistance (Average of three test specimens))	-	12500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) i)( Indivdual Dry Abrasion Resistance )	-	12500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) b)(Compressive strength (Average of eight test specimens))	-	12500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) a)( Indivdual Compressive strength)	-	12500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (i) b)(Water absorption (Average of three test specimens))	-	12500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (i) a)( Indivdual Water absorption)	-	12500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (ix)(Deviation from squareness)	-	12500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Indivdual Ratio of wearing face area and Plan area (Asw/Asp))	-	12500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Ratio of wearing face area and Plan area (Asw/Asp))	-	12500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Indivdual Plan Area (Asp))	-	12500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Plan Area (Asp))	-	12500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Indivdual Thickness of wearing Layer)	-	12500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Thickness of wearing Layer)	-	12500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Depth)	-	12500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Depth)	-	12500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Width)	-	12500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Width)	-	12500	-
Clause 7.2, Table No. 2, SI No. (iv) (Indivdual Aspect Ratio, L/Th)	-	12500	-
Clause 7.2, Table No. 2, SI No. (iv) (Aspect Ratio, L/Th)	-	12500	-
Clause 7.2, Table No. 2, SI No. (iii) (Indivdual Thickness, Th)	-	12500	-
Clause 7.2, Table No. 2, SI No. (iii) (Thickness, Th)	-	12500	-
Clause 7.2, Table No. 2, SI No. (ii) (Indivdual Length, L)	-	12500	-
Clause 7.2, Table No. 2, SI No. (ii) (Length, L)	-	12500	-
Clause 7.2, Table No. 2, SI No. (i) (Indivdual Width, W)	-	12500	-
Clause 7.2, Table No. 2, SI No. (i) (Width, W)	-	12500	-
Clause 6.3 (Bonding and Delamination between the layers of paver blocks)	-	12500	-
Clause 7.1.3 (Colour and Texture)	-	12500	-
Clauses 7.1.2 & 9.1.2 (Visual Inspection)	-	12500	-
Clause 7.1.1 (General Quality)	-	12500	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Individual Width - Lower)	-	12500	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Average Width -Lower)	-	12500	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Individual Width - Higher)	-	12500	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Average Width -Higher)	-	12500	-
Clause 3.20(Spacer nibs)	-	12500	-
10(Marking)	-	12500	-
cl.5(Cement)	-	0	-
5.2(Mineral Admixture)	-	0	-
5.3(Chemical Admixtures)	-	0	-
5.4(Coarse and Fine Aggregates)	-	0	-
5.5(Pigments)	-	0	-
5.6(Water)	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 50 cycles)	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 25 cycles)	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 10 cycles)	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Cumulative Weight losses of specimen after 10, 25 & 50 cycles)	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 50 cycles)	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 25 cycles)	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 10 cycles)	-	0	-
Clause 7.3, Annex G(Average Breaking Load)	-	12500	-
Clause 7.3, Annex G(Individual Breaking Load)	-	12500	-
Clause 7.3, Annex F(Average Failure Load per unit Length)	-	12500	-
Clause 7.3, Annex F(Individual Failure Load per unit Length)	-	12500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (v) b)(Average Flexural strength )	-	12500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (v) a)(Indivdual Flexural strength )	-	12500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) b)(Average Tensile splitting strength )	-	12500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) a)(Indivdual Tensile splitting strength )	-	12500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) ii)(Wet Abrasion resistance (Average of three test specimens))	-	12500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) i)( Indivdual Wet Abrasion Resistance )	-	12500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) ii)(Dry Abrasion resistance (Average of three test specimens))	-	12500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) i)( Indivdual Dry Abrasion Resistance )	-	12500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) b)(Compressive strength (Average of eight test specimens))	-	12500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) a)( Indivdual Compressive strength)	-	12500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (i) b)(Water absorption (Average of three test specimens))	-	12500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (i) a)( Indivdual Water absorption)	-	12500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (ix)(Deviation from squareness)	-	12500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Indivdual Ratio of wearing face area and Plan area (Asw/Asp))	-	12500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Ratio of wearing face area and Plan area (Asw/Asp))	-	12500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Indivdual Plan Area (Asp))	-	12500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Plan Area (Asp))	-	12500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Indivdual Thickness of wearing Layer)	-	12500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Thickness of wearing Layer)	-	12500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Depth)	-	12500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Depth)	-	12500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Width)	-	12500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Width)	-	12500	-
Clause 7.2, Table No. 2, SI No. (iv) (Indivdual Aspect Ratio, L/Th)	-	12500	-
Clause 7.2, Table No. 2, SI No. (iv) (Aspect Ratio, L/Th)	-	12500	-
Clause 7.2, Table No. 2, SI No. (iii) (Indivdual Thickness, Th)	-	12500	-
Clause 7.2, Table No. 2, SI No. (iii) (Thickness, Th)	-	12500	-
Clause 7.2, Table No. 2, SI No. (ii) (Indivdual Length, L)	-	12500	-
Clause 7.2, Table No. 2, SI No. (ii) (Length, L)	-	12500	-
Clause 7.2, Table No. 2, SI No. (i) (Indivdual Width, W)	-	12500	-
Clause 7.2, Table No. 2, SI No. (i) (Width, W)	-	12500	-
Clause 6.3 (Bonding and Delamination between the layers of paver blocks)	-	12500	-
Clause 7.1.3 (Colour and Texture)	-	12500	-
Clauses 7.1.2 & 9.1.2 (Visual Inspection)	-	12500	-
Clause 7.1.1 (General Quality)	-	12500	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Individual Width - Lower)	-	12500	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Average Width -Lower)	-	12500	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Individual Width - Higher)	-	12500	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Average Width -Higher)	-	12500	-
Clause 3.20(Spacer nibs)	-	12500	-
10(Marking)	-	12500	-
cl.5(Cement)	-	0	-
5.2(Mineral Admixture)	-	0	-
5.3(Chemical Admixtures)	-	0	-
5.4(Coarse and Fine Aggregates)	-	0	-
5.5(Pigments)	-	0	-
5.6(Water)	-	0	-

-
Included.w.e.f.13.02.2025

2018

INDIAN TESTING LABORATORY PRIVATE LIMITED

8171306

IS 17048 (2018)

Halogen free flame retardant (HFFR) cables for working voltages up to and including 1 100 Volts - Specification

165000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1 a) (Conductor : Material )	-	500	-
4.1.1 b) (Material : Seperator tape )	-	500	-
4.1.1 d) , 11.1, 12.1, 13.1,14.1(Class of conductor )	-	500	-
4.1.1 e) (Shape of conductor )	-	500	-
4.1.1 f) (Nominal size of conductor )	-	500	-
4.2.1, 11.2, 12.2, 13.2, 14.2(Insulation : Material )	-	500	-
4.2.2, 11.2, 12.2, 13.2, 14.2(Insulation : Application )	-	500	-
4.2.3,11.2, 12.2, 13.2(Thickness of insulation - Avearge : IS 10810 ( Part 6 ))	-	1000	-
4.2.3, 11.2, 12.2, 13.2, 14.2(Thickness of insulation - miniumum : IS 10810 ( Part 6 ))	-	1000	-
4.2.4(Insulation : Tensile stregth ( Before ageing)-IS 10810 (Part 7) )	-	2000	-
4.2.4(Insulation : Elongation ( Before ageing) -IS 10810 (Part 7))	-	2000	-
4.2.4(Insulation : Tensile stregth ( After ageing) - IS 10810 (Part 7) )	-	2000	-
4.2.5(Insulation : Tensile stregth variation ( After ageing) - IS 10810 (Part 7) )	-	2000	-
4.2.4(Insulation : Elongation (after ageing) - IS 10810 (Part 7) )	-	2000	-
4.2.5(Insulation : Elongation variation (after ageing) - IS 10810 (Part 7) )	-	2000	-
4.3(Fillers)	-	1000	-
4.4(Binder Tape)	-	1000	-
4.5.1,13.4, 14.4(Sheath : Compound )	-	1000	-
4.5.2, 13.4, 14.4(Sheath : Application)	-	1000	-
4.5.3,13.4, 14.4(Thickness of sheath - Average : IS 10810 (Part 6))	-	1000	-
4.5.3,13.4, 14.4(Thickness of sheath - Minimum : IS 10810 (Part 6))	-	1000	-
4.5.4, 13.4(Sheath : Tensile stregth ( Before ageing)-IS 10810 (Part 7) )	-	1000	-
4.5.4,13.4(Sheath : Elongation ( Before ageing) -IS 10810 (Part 7))	-	1000	-
4.5.4, 13.4, 14.4(Sheath : Tensile stregth ( After ageing) - IS 10810 (Part 7) )	-	1000	-
4.5.5, 13.4, 14.4(Sheath : Tensile stregth variation ( After ageing) - IS 10810 (Part 7) )	-	1000	-
4.5.4, 13.4, 14.4(Sheath : Elongation (after ageing) - IS 10810 (Part 7) )	-	1000	-
4.5.5, 13.4,14.4(Sheath : Elongation variation (after ageing) - IS 10810 (Part 7) )	-	1000	-
4.5.5, 11.3, 12.3, 13.6, 14.6(Overall Dimensions)	-	1000	-
4.5.5.1, 11.3, 12.3,13.5, 14.5(Ovality)	-	1000	-
4.5.6, 13.4(Colour of Sheath)	-	1000	-
5.1(High Voltage Test (at Room Temperature))	-	1000	-
5.2(Spark Test (Routine Test))	-	1000	-
5.3(Flammability Test- IS 10810 (Part 53).)	-	3000	-
5.4(Oxygen Index Test- IS 10810 (Part 58))	-	3000	-
5.5(Temperature Index-IS 10810 (Part 64).)	-	3000	-
5.6(Smoke Density-IS 10810 (Part 63).)	-	5000	-
5.7(Assessment of Halogen- Table 1 of Annex D)	-	5000	-
5.1(Persulphate Test- IS 10810 (Part 4).)	-	4000	-
5.11(Flame Retardant Test- IS 10810 (Part 61),)	-	4000	-
5.12(Hot Set Test- IS 10810 (Part 30).)	-	4000	-
5.12(Permanent Set - IS 10810 (Part 30).)	-	4000	-
5.13(Water Immersion Test (Effect of Water on Sheath) : Tensile strength -IS 10810 (Part 7).)	-	4000	-
5.13(Water Immersion Test (Effect of Water on Sheath) : Elogation -IS 10810 (Part 7).)	-	4000	-
5.14(Ozone Resistance Test -IS 10810 (Part 13 ))	-	4000	-
5.15(Cold Bend Test-IS 10810 (Part 20).)	-	4000	-
5.16(Cold Impact Test- IS 10810 (Part 21).)	-	4000	-
6.1, Table 1(CORE IDENTIFICATION)	-	4000	-
6.2(Core Identification by Numbers)	-	500	-
6.2.1(Preferred Arrangement of Marking)	-	5000	-
6.2.2(Durability)	-	500	-
7.0(CABLE CODE)	-	500	-
9.0( IDENTIFICATION)	-	500	-
10.1(Packing )	-	500	-
10.2(marking)	-	500	-
10.2.1(Standards marking)	-	500	-
13.3, 14.3(assembly of cores )	-	500	-
6.1(General Requirements)	-	500	-
6.1.1(Colour Combination Green Yellow)	-	500	-
12.1(Conductor)	-	500	-
12.2, Table 4(insulation)	-	500	-
Table 4(Copper Purity test)	-	5000	-
4.3.1 (e)(Fluorine content test (Fillers))	-	5000	-
4.3.1 (d)(Presence of fluorine test (Fillers))	-	5000	-
4.3.1 (c)(Conductivity test (Fillers))	-	5000	-
4.3.1 (b)(pH test (Fillers))	-	5000	-
4.3.1 (a)(HCl test (Fillers))	-	5000	-
5.7 (a)(HCl test (Assessment of halogen test))	-	5000	-
5.7 (b)(pH test (Assessment of halogen test))	-	5000	-
5.7 (c)(Conductivity test (Assessment of halogen test))	-	5000	-
5.7 (d)(Presence of fluorine test (Assessment of halogen test))	-	5000	-
5.7 (e)(Fluorine content test (Assessment of halogen test))	-	5000	-
Table 2 ,( Clause 11.4, 12.4, 13.7 14.7 and 15.7 )(Insulation Resistance)	-	500	-
"Table 2 ( Clause 11.4, 12.4, 13.7 14.7 and 15.7 )"(Conductor Resistance)	-	500	-
Table 2 , Clause .5.13(Water immersion test (Effect of water on sheath) - TS Variation of Sheath)	-	500	-
Table 2 , Clause 5.13(Water immersion test (Effect of water on sheath) - Elongation Variation of Sheath)	-	5000	-
"Table 2 ( Clause 11.4, 12.4, 13.7 14.7 and 15.7 )"(Hot Deformation)	-	500	-
Table 2, III.a.ii(Annealing test (for Cu, before stranding))	-	1000	-
Table 2, II.a, b(Wrapping test before stranding (for Al))	-	800	-
Cl.4.2.1 & Annex A(Insulation Resistance Constant at Rated Temperature (70°C))	-	800	-
Table 2, III a (i)(Conductor Resistance)	-	800	-
Annex A(Hot Deformation)	-	600	-
6.1, Table 1(CORE IDENTIFICATION)	-	0	-
6.1(General Requirements)	-	0	-
6.1.1(Colour Combination Green Yellow)	-	0	-
12.1(Conductor)	-	0	-
12.2, Table 4(insulation)	-	0	-
Table 4(Copper Purity test)	-	0	-
4.3.1 (e)(Fluorine content test (Fillers))	-	0	-
4.3.1 (d)(Presence of fluorine test (Fillers))	-	0	-
4.3.1 (c)(Conductivity test (Fillers))	-	0	-
4.3.1 (b)(pH test (Fillers))	-	0	-
4.3.1 (a)(HCl test (Fillers))	-	0	-
5.7 (a)(HCl test (Assessment of halogen test))	-	0	-
5.7 (b)(pH test (Assessment of halogen test))	-	0	-
5.7 (c)(Conductivity test (Assessment of halogen test))	-	0	-
5.7 (d)(Presence of fluorine test (Assessment of halogen test))	-	0	-
5.7 (e)(Fluorine content test (Assessment of halogen test))	-	0	-
Table 2 ,( Clause 11.4, 12.4, 13.7 14.7 and 15.7 )(Insulation Resistance)	-	0	-
"Table 2 ( Clause 11.4, 12.4, 13.7 14.7 and 15.7 )"(Conductor Resistance)	-	0	-
Table 2 , Clause .5.13(Water immersion test (Effect of water on sheath) - TS Variation of Sheath)	-	0	-
Table 2 , Clause 5.13(Water immersion test (Effect of water on sheath) - Elongation Variation of Sheath)	-	0	-
"Table 2 ( Clause 11.4, 12.4, 13.7 14.7 and 15.7 )"(Hot Deformation)	-	0	-
Table 2, III.a.ii(Annealing test (for Cu, before stranding))	-	0	-
Table 2, II.a, b(Wrapping test before stranding (for Al))	-	0	-
Cl.4.2.1 & Annex A(Insulation Resistance Constant at Rated Temperature (70°C))	-	0	-
Table 2, III a (i)(Conductor Resistance)	-	0	-
Annex A(Hot Deformation)	-	0	-
6.1, Table 1(CORE IDENTIFICATION)	-	-	-
6.1(General Requirements)	-	-	-
6.1.1(Colour Combination Green Yellow)	-	-	-
12.1(Conductor)	-	-	-
12.2, Table 4(insulation)	-	-	-
Table 4(Copper Purity test)	-	-	-
4.3.1 (e)(Fluorine content test (Fillers))	-	-	-
4.3.1 (d)(Presence of fluorine test (Fillers))	-	-	-
4.3.1 (c)(Conductivity test (Fillers))	-	-	-
4.3.1 (b)(pH test (Fillers))	-	-	-
4.3.1 (a)(HCl test (Fillers))	-	-	-
5.7 (a)(HCl test (Assessment of halogen test))	-	-	-
5.7 (b)(pH test (Assessment of halogen test))	-	-	-
5.7 (c)(Conductivity test (Assessment of halogen test))	-	-	-
5.7 (d)(Presence of fluorine test (Assessment of halogen test))	-	-	-
5.7 (e)(Fluorine content test (Assessment of halogen test))	-	-	-
Table 2 ,( Clause 11.4, 12.4, 13.7 14.7 and 15.7 )(Insulation Resistance)	-	-	-
"Table 2 ( Clause 11.4, 12.4, 13.7 14.7 and 15.7 )"(Conductor Resistance)	-	-	-
Table 2 , Clause .5.13(Water immersion test (Effect of water on sheath) - TS Variation of Sheath)	-	-	-
Table 2 , Clause 5.13(Water immersion test (Effect of water on sheath) - Elongation Variation of Sheath)	-	-	-
"Table 2 ( Clause 11.4, 12.4, 13.7 14.7 and 15.7 )"(Hot Deformation)	-	-	-
Table 2, III.a.ii(Annealing test (for Cu, before stranding))	-	-	-
Table 2, II.a, b(Wrapping test before stranding (for Al))	-	-	-
Cl.4.2.1 & Annex A(Insulation Resistance Constant at Rated Temperature (70°C))	-	-	-
Table 2, III a (i)(Conductor Resistance)	-	-	-
Annex A(Hot Deformation)	-	-	-

15 Aug, 2028

-
Included w.e.f 12.03.2025

2019

SHRI BAJRANG TESTING LABS

8183006

IS 5509 (2021)

Fire Retardant Plywood - Specification ( Third Revision )

ALL

13900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.3 (Table 1)(b) 6 mm and above)	-	500	-
4.1(Flame retardant chemicals)	-	300	-
4.2(Flame retardant and preservative treatment)	-	500	-
4.3(Treatment)	-	500	-
5(PREPARATION FOR TREATMENT)	-	500	-
6.1.1(Treatment of Plywood by Pressure Impregnation after Manufacture)	-	500	-
6.1.2(Soaking Treatment)	-	500	-
6.2(Choice of Treatment)	-	300	-
7(CONDITIONING AFTER TREATMENT)	-	500	-
8.1(Dimensions)	-	500	-
8.2(Thickness)	-	300	-
8.3, Taable-1 (i)(Tolerance- Length)	-	300	-
9(WORKMANSHIP AND FINISH)	-	300	-
10(SAMPLING AND CRITERIA FOR CONFORMITY)	-	300	-
11 (a)(For flammability)	-	1500	-
11 (b)(For flame penetration)	-	1500	-
11 (c)(For rate of burning)	-	1500	-
12.1 Table - 2 (i)(Moisture content, percent, Max)	-	500	-
12.1 Table - 2 (ii)(Flammability (see Note 1), minutes, Min)	-	1500	-
12.1 Table - 2 (iii)(Flame penetration (see Note 2), minutes, Min)	-	1500	-
12.1 Table - 2 (iv)(Rate of burning (see Note 3), minutes, Min)	-	1500	-
12.2(Other Tests)	-	500	-
14(Marking)	-	200	-
Cl-13(ADDITIONAL REQUIREMENTS FOR ECO-MARK)	-	0	-
8.3 (Table 1)(b) 6 mm and above)	-	0	-
4.1(Flame retardant chemicals)	-	0	-
4.2(Flame retardant and preservative treatment)	-	0	-
4.3(Treatment)	-	0	-
5(PREPARATION FOR TREATMENT)	-	0	-
6.1.1(Treatment of Plywood by Pressure Impregnation after Manufacture)	-	0	-
6.1.2(Soaking Treatment)	-	0	-
6.2(Choice of Treatment)	-	0	-
7(CONDITIONING AFTER TREATMENT)	-	0	-
8.1(Dimensions)	-	0	-
8.2(Thickness)	-	0	-
8.3, Taable-1 (i)(Tolerance- Length)	-	0	-
9(WORKMANSHIP AND FINISH)	-	0	-
10(SAMPLING AND CRITERIA FOR CONFORMITY)	-	0	-
11 (a)(For flammability)	-	0	-
11 (b)(For flame penetration)	-	0	-
11 (c)(For rate of burning)	-	0	-
12.1 Table - 2 (i)(Moisture content, percent, Max)	-	0	-
12.1 Table - 2 (ii)(Flammability (see Note 1), minutes, Min)	-	0	-
12.1 Table - 2 (iii)(Flame penetration (see Note 2), minutes, Min)	-	0	-
12.1 Table - 2 (iv)(Rate of burning (see Note 3), minutes, Min)	-	0	-
12.2(Other Tests)	-	0	-
14(Marking)	-	0	-
Cl-13(ADDITIONAL REQUIREMENTS FOR ECO-MARK)	-	0	-
8.3 (Table 1)(b) 6 mm and above)	-	0	-
4.1(Flame retardant chemicals)	-	0	-
4.2(Flame retardant and preservative treatment)	-	0	-
4.3(Treatment)	-	0	-
5(PREPARATION FOR TREATMENT)	-	0	-
6.1.1(Treatment of Plywood by Pressure Impregnation after Manufacture)	-	0	-
6.1.2(Soaking Treatment)	-	0	-
6.2(Choice of Treatment)	-	0	-
7(CONDITIONING AFTER TREATMENT)	-	0	-
8.1(Dimensions)	-	0	-
8.2(Thickness)	-	0	-
8.3, Taable-1 (i)(Tolerance- Length)	-	0	-
9(WORKMANSHIP AND FINISH)	-	0	-
10(SAMPLING AND CRITERIA FOR CONFORMITY)	-	0	-
11 (a)(For flammability)	-	0	-
11 (b)(For flame penetration)	-	0	-
11 (c)(For rate of burning)	-	0	-
12.1 Table - 2 (i)(Moisture content, percent, Max)	-	0	-
12.1 Table - 2 (ii)(Flammability (see Note 1), minutes, Min)	-	0	-
12.1 Table - 2 (iii)(Flame penetration (see Note 2), minutes, Min)	-	0	-
12.1 Table - 2 (iv)(Rate of burning (see Note 3), minutes, Min)	-	0	-
12.2(Other Tests)	-	0	-
14(Marking)	-	0	-
Cl-13(ADDITIONAL REQUIREMENTS FOR ECO-MARK)	-	0	-

01 Dec, 2027

-
Included w.e.f 20.03.2025 Size restricted upto 2100 mm

2020

INDIAN TESTING LABORATORY PRIVATE LIMITED

8171306

IS 1660 (2024)

Wrought and Cast Aluminium Utensils Specification ( Second Revision )

29500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-3.1.1, 3.1.2(Minimum Thickness of Sheet)	-	500	-
Cl-3.1.3, Table-2(Minimum Thickness at the Bottom)	-	500	-
Cl-3.1.3, Table-2(Minimium Thickness of Wall at the Top Edge)	-	500	-
Cl-3.1.3, Table-2(Minimum Cover Thickness)	-	500	-
Cl-4.1(Main body of utensil)	-	1000	-
Cl-4.1(Cast cookware)	-	1000	-
Cl-4.1(Other aluminum components and parts)	-	1000	-
Cl-4.1.1(Lids (material))	-	1000	-
Cl-4.1.1(Minimum thickness of lid)	-	500	-
Cl-4.1.2(Minimum thickness of glass)	-	500	-
Cl-4.1.2(Material of rim)	-	500	-
Cl-4.1.2(Minimum thickness of rim)	-	500	-
Cl-4.2(Material of strips)	-	1000	-
Cl-4.2(Stainless steel handles, rivets and fittings)	-	1000	-
Cl-4.3(Clips of lunch box)	-	1000	-
Cl-4.3(Clips of lunch box)	-	1000	-
Cl-4.3(Rivets used in lunch box)	-	1000	-
Cl-4.4(Screws, studs/nuts, and locking loop)	-	1000	-
Cl-4.5(Rivets for fixing of handles)	-	500	-
Cl-4.5(Material of cap)	-	500	-
Cl-4.6(Strips used for flame guards)	-	2500	-
Cl-4.6(stainless steel)	-	2500	-
Cl-5(Fabrication)	-	2000	-
Cl-6(Shape and Dimensions)	-	1000	-
Cl-7.1(Handles, when fitted)	-	1000	-
Cl-7.2(Handles)	-	1000	-
Cl-7.3 (Cl- 4.1 of IS 13395)(Construction)	-	500	-
Cl-7.3 (Cl- 4.2 of IS 13395)(Materials)	-	1000	-
Cl-7.3 (Cl- 4.3 of IS 13395)(Selection and Size)	-	500	-
Cl-7.3 (Cl- 4.4 of IS 13395)(Position of Handle and Knob with Respect to Cookware)	-	1000	-
Cl-7.3 (Cl- 4.5 of IS 13395)(Attachment to Cookware)	-	1000	-
Cl-7.3 (Cl- 5.2 of IS 13395)(Bending Strength)	-	2500	-
Cl-7.3 (Cl- 5.3 of IS 13395)(Torque Strength)	-	2500	-
Cl-7.3 (Cl- 5.4 of IS 13395)(Impact Strength)	-	2500	-
Cl-7.3 (Cl- 5.5 of IS 13395)(Fatigue Resistance)	-	2500	-
Cl-7.3 (Cl- 5.6 of IS 13395)(Leakage)	-	2500	-
Cl-7.3 (Cl- 5.7 of IS 13395)(Thermal Insulation)	-	2500	-
Wrought and Cast Aluminium Utensils — Specification(Heat Resistance)	-	250	-
Cl-7.3 (Cl- 5.9 of IS 13395)(Washing Resistance (Type Test))	-	1000	-
Cl-7.3 (Cl- 5.10 of IS 13395)(Burning Resistance)	-	1000	-
Cl-8(Workmanship and Finish)	-	250	-
Cl-8.3(Utensils, if anodized, fully or partially)	-	500	-
Cl-8.3(Minimum nominal thickness)	-	500	-
Cl-8.3(Thickness of hard anodized)	-	250	-
Cl-8.3(Finish and appearance of hard anodized)	-	250	-
Cl-8.3(Abrasion resistance of hard anodized)	-	1000	-
Cl-8.3(Colour of hard anodized)	-	500	-
Cl-8.3(Hardness of hard anodized)	-	500	-
Wrought and Cast Aluminium Utensils — Specification(Lid of the cookware)	-	500	-
Cl-8.5(Non-stick unreinforced PTFE)	-	500	-
Cl-8.6(Ceramic coating)	-	500	-
Cl-8.7(The thickness test, adhesion test)	-	1000	-
Cl-8.7(Minimum thickness of coating)	-	1000	-
Cl-8.7.1(Dry heat the cookware)	-	1000	-
Cl-8.8(Requirements of PTFE)	-	1000	-
Cl-8.9(Material for induction plate)	-	500	-
Cl-8.9(Test for Induction compatible base)	-	1000	-
Cl-8.10.1(Tests for Lunch Boxes- Performance Test)	-	1000	-
Cl-8.10.1(Tests for Lunch Boxes- Performance Test)	-	1000	-
Cl-8.10.2(Tests for Lunch Boxes- Ground Nut Oil Test for Leakage)	-	1000	-
Cl-8.11.1(Test(s) on Tempered Glass Lid- Fragmentation Test)	-	500	-
Cl-8.11.2(Test(s) on Tempered Glass Lid-Ball Drop Test)	-	500	-
Cl-8.11.3(Test(s) on Tempered Glass Lid- Thermal Shock Test)	-	500	-
Cl-8.11.4(Test(s) on Tempered Glass Lid- Free Fall Test)	-	500	-
Cl-9.1(Normal Capacity)	-	500	-
Cl-9.2(Normal Capacity of internal diameter)	-	500	-
Cl-3.1.1, 3.1.2(Minimum Thickness of Sheet)	-	0	-
Cl-3.1.3, Table-2(Minimum Thickness at the Bottom)	-	0	-
Cl-3.1.3, Table-2(Minimium Thickness of Wall at the Top Edge)	-	0	-
Cl-3.1.3, Table-2(Minimum Cover Thickness)	-	0	-
Cl-4.1(Main body of utensil)	-	0	-
Cl-4.1(Cast cookware)	-	0	-
Cl-4.1(Other aluminum components and parts)	-	0	-
Cl-4.1.1(Lids (material))	-	0	-
Cl-4.1.1(Minimum thickness of lid)	-	0	-
Cl-4.1.2(Minimum thickness of glass)	-	0	-
Cl-4.1.2(Material of rim)	-	0	-
Cl-4.1.2(Minimum thickness of rim)	-	0	-
Cl-4.2(Material of strips)	-	0	-
Cl-4.2(Stainless steel handles, rivets and fittings)	-	0	-
Cl-4.3(Clips of lunch box)	-	0	-
Cl-4.3(Clips of lunch box)	-	0	-
Cl-4.3(Rivets used in lunch box)	-	0	-
Cl-4.4(Screws, studs/nuts, and locking loop)	-	0	-
Cl-4.5(Rivets for fixing of handles)	-	0	-
Cl-4.5(Material of cap)	-	0	-
Cl-4.6(Strips used for flame guards)	-	0	-
Cl-4.6(stainless steel)	-	0	-
Cl-5(Fabrication)	-	0	-
Cl-6(Shape and Dimensions)	-	0	-
Cl-7.1(Handles, when fitted)	-	0	-
Cl-7.2(Handles)	-	0	-
Cl-7.3 (Cl- 4.1 of IS 13395)(Construction)	-	0	-
Cl-7.3 (Cl- 4.2 of IS 13395)(Materials)	-	0	-
Cl-7.3 (Cl- 4.3 of IS 13395)(Selection and Size)	-	0	-
Cl-7.3 (Cl- 4.4 of IS 13395)(Position of Handle and Knob with Respect to Cookware)	-	0	-
Cl-7.3 (Cl- 4.5 of IS 13395)(Attachment to Cookware)	-	0	-
Cl-7.3 (Cl- 5.2 of IS 13395)(Bending Strength)	-	0	-
Cl-7.3 (Cl- 5.3 of IS 13395)(Torque Strength)	-	0	-
Cl-7.3 (Cl- 5.4 of IS 13395)(Impact Strength)	-	0	-
Cl-7.3 (Cl- 5.5 of IS 13395)(Fatigue Resistance)	-	0	-
Cl-7.3 (Cl- 5.6 of IS 13395)(Leakage)	-	0	-
Cl-7.3 (Cl- 5.7 of IS 13395)(Thermal Insulation)	-	0	-
Wrought and Cast Aluminium Utensils — Specification(Heat Resistance)	-	0	-
Cl-7.3 (Cl- 5.9 of IS 13395)(Washing Resistance (Type Test))	-	0	-
Cl-7.3 (Cl- 5.10 of IS 13395)(Burning Resistance)	-	0	-
Cl-8(Workmanship and Finish)	-	0	-
Cl-8.3(Utensils, if anodized, fully or partially)	-	0	-
Cl-8.3(Minimum nominal thickness)	-	0	-
Cl-8.3(Thickness of hard anodized)	-	0	-
Cl-8.3(Finish and appearance of hard anodized)	-	0	-
Cl-8.3(Abrasion resistance of hard anodized)	-	0	-
Cl-8.3(Colour of hard anodized)	-	0	-
Cl-8.3(Hardness of hard anodized)	-	0	-
Wrought and Cast Aluminium Utensils — Specification(Lid of the cookware)	-	0	-
Cl-8.5(Non-stick unreinforced PTFE)	-	0	-
Cl-8.6(Ceramic coating)	-	0	-
Cl-8.7(The thickness test, adhesion test)	-	0	-
Cl-8.7(Minimum thickness of coating)	-	0	-
Cl-8.7.1(Dry heat the cookware)	-	0	-
Cl-8.8(Requirements of PTFE)	-	0	-
Cl-8.9(Material for induction plate)	-	0	-
Cl-8.9(Test for Induction compatible base)	-	0	-
Cl-8.10.1(Tests for Lunch Boxes- Performance Test)	-	0	-
Cl-8.10.1(Tests for Lunch Boxes- Performance Test)	-	0	-
Cl-8.10.2(Tests for Lunch Boxes- Ground Nut Oil Test for Leakage)	-	0	-
Cl-8.11.1(Test(s) on Tempered Glass Lid- Fragmentation Test)	-	0	-
Cl-8.11.2(Test(s) on Tempered Glass Lid-Ball Drop Test)	-	0	-
Cl-8.11.3(Test(s) on Tempered Glass Lid- Thermal Shock Test)	-	0	-
Cl-8.11.4(Test(s) on Tempered Glass Lid- Free Fall Test)	-	0	-
Cl-9.1(Normal Capacity)	-	0	-
Cl-9.2(Normal Capacity of internal diameter)	-	0	-
Cl-3.1.1, 3.1.2(Minimum Thickness of Sheet)	-	0	-
Cl-3.1.3, Table-2(Minimum Thickness at the Bottom)	-	0	-
Cl-3.1.3, Table-2(Minimium Thickness of Wall at the Top Edge)	-	0	-
Cl-3.1.3, Table-2(Minimum Cover Thickness)	-	0	-
Cl-4.1(Main body of utensil)	-	0	-
Cl-4.1(Cast cookware)	-	0	-
Cl-4.1(Other aluminum components and parts)	-	0	-
Cl-4.1.1(Lids (material))	-	0	-
Cl-4.1.1(Minimum thickness of lid)	-	0	-
Cl-4.1.2(Minimum thickness of glass)	-	0	-
Cl-4.1.2(Material of rim)	-	0	-
Cl-4.1.2(Minimum thickness of rim)	-	0	-
Cl-4.2(Material of strips)	-	0	-
Cl-4.2(Stainless steel handles, rivets and fittings)	-	0	-
Cl-4.3(Clips of lunch box)	-	0	-
Cl-4.3(Clips of lunch box)	-	0	-
Cl-4.3(Rivets used in lunch box)	-	0	-
Cl-4.4(Screws, studs/nuts, and locking loop)	-	0	-
Cl-4.5(Rivets for fixing of handles)	-	0	-
Cl-4.5(Material of cap)	-	0	-
Cl-4.6(Strips used for flame guards)	-	0	-
Cl-4.6(stainless steel)	-	0	-
Cl-5(Fabrication)	-	0	-
Cl-6(Shape and Dimensions)	-	0	-
Cl-7.1(Handles, when fitted)	-	0	-
Cl-7.2(Handles)	-	0	-
Cl-7.3 (Cl- 4.1 of IS 13395)(Construction)	-	0	-
Cl-7.3 (Cl- 4.2 of IS 13395)(Materials)	-	0	-
Cl-7.3 (Cl- 4.3 of IS 13395)(Selection and Size)	-	0	-
Cl-7.3 (Cl- 4.4 of IS 13395)(Position of Handle and Knob with Respect to Cookware)	-	0	-
Cl-7.3 (Cl- 4.5 of IS 13395)(Attachment to Cookware)	-	0	-
Cl-7.3 (Cl- 5.2 of IS 13395)(Bending Strength)	-	0	-
Cl-7.3 (Cl- 5.3 of IS 13395)(Torque Strength)	-	0	-
Cl-7.3 (Cl- 5.4 of IS 13395)(Impact Strength)	-	0	-
Cl-7.3 (Cl- 5.5 of IS 13395)(Fatigue Resistance)	-	0	-
Cl-7.3 (Cl- 5.6 of IS 13395)(Leakage)	-	0	-
Cl-7.3 (Cl- 5.7 of IS 13395)(Thermal Insulation)	-	0	-
Wrought and Cast Aluminium Utensils — Specification(Heat Resistance)	-	0	-
Cl-7.3 (Cl- 5.9 of IS 13395)(Washing Resistance (Type Test))	-	0	-
Cl-7.3 (Cl- 5.10 of IS 13395)(Burning Resistance)	-	0	-
Cl-8(Workmanship and Finish)	-	0	-
Cl-8.3(Utensils, if anodized, fully or partially)	-	0	-
Cl-8.3(Minimum nominal thickness)	-	0	-
Cl-8.3(Thickness of hard anodized)	-	0	-
Cl-8.3(Finish and appearance of hard anodized)	-	0	-
Cl-8.3(Abrasion resistance of hard anodized)	-	0	-
Cl-8.3(Colour of hard anodized)	-	0	-
Cl-8.3(Hardness of hard anodized)	-	0	-
Wrought and Cast Aluminium Utensils — Specification(Lid of the cookware)	-	0	-
Cl-8.5(Non-stick unreinforced PTFE)	-	0	-
Cl-8.6(Ceramic coating)	-	0	-
Cl-8.7(The thickness test, adhesion test)	-	0	-
Cl-8.7(Minimum thickness of coating)	-	0	-
Cl-8.7.1(Dry heat the cookware)	-	0	-
Cl-8.8(Requirements of PTFE)	-	0	-
Cl-8.9(Material for induction plate)	-	0	-
Cl-8.9(Test for Induction compatible base)	-	0	-
Cl-8.10.1(Tests for Lunch Boxes- Performance Test)	-	0	-
Cl-8.10.1(Tests for Lunch Boxes- Performance Test)	-	0	-
Cl-8.10.2(Tests for Lunch Boxes- Ground Nut Oil Test for Leakage)	-	0	-
Cl-8.11.1(Test(s) on Tempered Glass Lid- Fragmentation Test)	-	0	-
Cl-8.11.2(Test(s) on Tempered Glass Lid-Ball Drop Test)	-	0	-
Cl-8.11.3(Test(s) on Tempered Glass Lid- Thermal Shock Test)	-	0	-
Cl-8.11.4(Test(s) on Tempered Glass Lid- Free Fall Test)	-	0	-
Cl-9.1(Normal Capacity)	-	0	-
Cl-9.2(Normal Capacity of internal diameter)	-	0	-

15 Aug, 2028

-
Included w.e.f 11.02.2025

2021

BIS, Hyderabad Branch Laboratory (HYBL)

None

IS 16008 : Part 2 (2016)

Agro textiles “ Shade nets for agriculture and horticulture purposes “ Specification Part 2 Shade nets made from mono filament yarns (first revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (HDPE Mono filament)	-
4.1 (HDPE Mono filament)	-
4.2 (Fabric)	-
4.3 (Colour)	-
5.0 (Types)	-
6.1 (Dimensions and mass)	-
6.2 Table 1 (Mass g/m2,Min)	-
6.2 Table 1 (Average breaking strength of shade nets fabric (Strip method,Warpway,Weftway 325 mm × 50 mm test piece with gauge length of 200 mm), N, Min )	-
6.2 Table 1 (Warpway Weftway)	-
6.2 Table 1 (Retention of breaking strength after UV exposure, N, Min)	-
6.2 Table 1 (Shading %)	-

-
Except raw material test, Colour fastness of artificial light and Bursting pressure test

2022

BIS, Hyderabad Branch Laboratory (HYBL)

None

IS 16008 : Part 1 (2016)

Agro textiles “ Shade nets for agriculture and horticulture purposes “ Specification Part 1 Shade nets made from tape yarns (first revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 (Dimensions and Mass - IS 1954)	-
6.2 Table 1 (Mass - IS 1964)	-
6.2 Table 1 (Average breaking strength of shade nets fabric (Strip method, 325 mm x 50 mm test piece with gauge length of 200 mm) - IS 1969 (Part 1))	-
6.2 Table 1 (Average breaking strength of shade nets fabric (Strip method, 325 mm x 50 mm test piece with gauge length of 200 mm) - IS 1969 (Part 1))	-
6.2 Table 1 (Retention of breaking strength after UV exposure - IS 1969 (Part 1))	-
4.3, 4 (Colour)	-
4.1, 4 ( HDPE Tapes Linear density )	-
4.1, 4 (HDPE Tapes Width )	-
4.1, 4 (HDPE Tapes UV stabilizer)	-
4.1, 4 (HDPE Tapes Material Identification )	-
6.2 Table 1 (Shading Percentage)	-

-
Except raw material test, Colour fastness of artificial light and Bursting pressure test

2023

The Automotive Research Association of India

7106935

IS 2553 : Part 2 (2019)

Safety glass - Specification: Part 2 for road transport (First Revision)

209521 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.1(Light Transmittance)	-	5700	-
5.1.1(Light Transmittance)	-	5700	-
5.1.2.1(Resistance to Abrasion)	-	7888	-
5.1.2.2(Resistance to Abrasion)	-	7888	-
5.1.2.3.1(Resistance to Abrasion)	-	7888	-
5.1.2.3.2(Resistance to Abrasion)	-	7888	-
5.1.2.3.2(Resistance to Abrasion)	-	7888	-
5.3.1 (Resistance to Radiation)	-	26840	-
5.3.2(Resistance to High Temperature)	-	6571	-
5.3.3.1(Resistance to Humidity)	-	80172	-
5.3.3.2(Resistance to Humidity)	-	80172	-
5.3.3.2(Resistance to Humidity)	-	80172	-
5.3.3.3(Resistance to Humidity)	-	80172	-
5.4.1(Optical Distortion)	-	6622	-
5.4.1.3 (Optical Distortion)	-	6622	-
5.4.2(Secondary image separation test-Vehicle Category M1 and N -Zone A)	-	6160	-
5.4.2(Secondary image separation test-Vehicle Category M1 and N -Zone B)	-	6160	-
5.4.2(Secondary image separation test-Vehicle Category L -Zone Primary area)	-	6160	-
5.4.2(Secondary image separation test-Vehicle Category L -Zone Secondary area)	-	6160	-
5.4.2(Secondary image separation test-Vehicle Category M2 , M3 and N -central area)	-	6160	-
5.4.2.3(Secondary image separation test)	-	6160	-
5.4.3.1(Head-form Test (Location of crack))	-	12142	-
5.4.3.2(Head-form Test (Interlayer adhesion))	-	12142	-
5.4.3.3.1(Head-form Test)	-	12142	-
5.4.3.3.2(Head-form Test)	-	12142	-
5.4.4(2.260 g Ball)	-	8650	-
5.4.5.1(227 g Ball)	-	13049	-
5.4.5.2(227 g Ball)	-	13049	-
5.4.5.3(227 g Ball)	-	13049	-
5.4.5.4(227 g Ball)	-	13049	-
5.5.1.1.1(Fragmentation Test)	-	12897	-
5.5.1.1.4(Fragmentation Test)	-	12897	-
5.5.1.1.5(Fragmentation Test)	-	12897	-
5.5.1.1.5.1(Fragmentation Test)	-	12897	-
5.5.1.1.5.2(Fragmentation Test)	-	12897	-
5.5.1.2(227 g ball test)	-	5851	-
5.5.2.1.1(227 g ball test)	-	7122	-
5.5.2.1.2(227 g ball test)	-	7122	-
5.5.2.1.3(227 g ball test)	-	7122	-
5.5.3.1(equirements Applicable only to Double-Glazed Units-Individual components)	-	5700	-
5.5.3.2.1( Head-form Test)	-	13813	-
5.5.3.2.2.1( Head-form Test)	-	13813	-
5.5.3.2.2.2( Head-form Test)	-	13813	-
5.5.3.2.2.3( Head-form Test)	-	13813	-
5.5.3.2.3-a( Head-form Test)	-	13813	-
5.5.3.2.3-b-1( Head-form Test)	-	13813	-
5.5.3.2.3-b-2( Head-form Test)	-	13813	-
5.5.3.2.3-b-3( Head-form Test)	-	13813	-

11 Jan, 2028

-
-

2024

The Automotive Research Association of India

7106935

IS 15627 (2022)

Automotive Vehicles - Pneumatic Tyres for Two and Three - Wheeled Motor Vehicles - Specification First Revision

71250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. No. 4.1.1.1, Annex D, Table No. 5(a), 5(b), 6(a), 6(b), 7 to 12(Tyre Dimension_Section Width of Tyre)	-	6360	Dimension Test Charge. Charges are inclusive of all parameters of dimension test requirements
Cl. No. 4.1.1.2, Annex D, Table No. 5(a), 5(b), 6(a), 6(b), 7 to 12(Tyre Dimension_Outer Diameter of Tyre)	-	6360	Charges are included in dimension test charge
Cl. No. 4.2 & E-1.2, Annex E, Table No. 13(Load/Speed Performance Test)	-	19200	Charges are inclusive of all parameters of Load/Speed Performance Test requirements
Cl. No. 4.4, G-1, G-6.1 and G-6.3, Annex G, Table No.15 to 17(Tyre Strengtrh Test (Plunger Test))	-	10320	Charges are inclusive of all parameters of Tyre Strength Test (Plunger Test) requirements
Cl. No. 4.5, H-4 & E-1.2 Annex H, Table No. 18(Endurance Test)	-	78000	Charges are inclusive of all parameters of Endurance Test requirements
Cl. No. 4.6,Annex-D(Tread Wear Indicators)	-	6360	Charges are included in dimension test charge
Cl. No. 5.1(a) to 5.1 (u)(Markings)	-	6360	Charges are included in dimension test charge
Cl. No. 5.2, Annex H, Table No. 19 & 20(Arrangement of Tyre Markings)	-	6360	Charges are included in dimension test charge
Cl. No. 5.2, Annex H, Table No. 19 & 20(Arrangement of Tyre Markings)	-	6360	Charges are included in dimension test charge
6.6.2,Anx-K(Technical specification-Declaration)	-	0	-
5(Marking)	-	6360	Charges are included in dimension test charge
4.1(Tyre dimension- Section Width)	-	6360	Charges are included in dimension test charge
4.1(Tyre dimension- Outer diameter)	-	6360	Charges are included in dimension test charge
4.6(Tread wear Indicator)	-	6360	Charges are included in dimension test charge
4.4(Tyre strength (Plunger test))	-	10320	Charges are inclusive of all parameters of Tyre Strength Test (Plunger Test) requirements
4.5(Endurance test)	-	78000	Charges are inclusive of all parameters of Endurance Test requirements
4.2(Load & Speed test)	-	19200	Charges are inclusive of all parameters of Load/Speed Performance Test requirements
5(Marking)	-	6360	Charges are included in dimension test charge
4.1(Tyre Dimensions)	-	6360	Charges are included in dimension test charge
4.2(Load/Speed Performance Test)	-	19200	Charges are inclusive of all parameters of Load/Speed Performance Test requirements
4.4(Tyre Strength Test (Plunger Test))	-	10320	Charges are inclusive of all parameters of Tyre Strength Test (Plunger Test) requirements
4.5(Endurance Test)	-	78000	Charges are inclusive of all parameters of Endurance Test requirements
4.6(Tread wear Indicators)	-	6360	Charges are included in dimension test charge
Cl. No. 4.1.1.1, Annex D, Table No. 5(a), 5(b), 6(a), 6(b), 7 to 12(Tyre Dimension_Section Width of Tyre)	-	6360	Charges are included in dimension test charge
Cl. No. 4.1.1.2, Annex D, Table No. 5(a), 5(b), 6(a), 6(b), 7 to 12(Tyre Dimension_Outer Diameter of Tyre)	-	6360	Charges are included in dimension test charge
Cl. No. 4.2 & E-1.2, Annex E, Table No. 13(Load/Speed Performance Test)	-	19200	Charges are inclusive of all parameters of Load/Speed Performance Test requirements
Cl. No. 4.4, G-1, G-6.1 and G-6.3, Annex G, Table No.15 to 17(Tyre Strengtrh Test (Plunger Test))	-	10320	Charges are inclusive of all parameters of Tyre Strength Test (Plunger Test) requirements
Cl. No. 4.5, H-4 & E-1.2 Annex H, Table No. 18(Endurance Test)	-	78000	Charges are inclusive of all parameters of Endurance Test requirements
Cl. No. 4.6,Annex-D(Tread Wear Indicators)	-	6360	Charges are included in dimension test charge
Cl. No. 5.1(a) to 5.1 (u)(Markings)	-	6360	Charges are included in dimension test charge
Cl. No. 5.2, Annex H, Table No. 19 & 20(Arrangement of Tyre Markings)	-	6360	Charges are included in dimension test charge
Cl. No. 4.1.1.1, Annex D, Table No. 5(a), 5(b), 6(a), 6(b), 7 to 12(Tyre Dimension_Section Width of Tyre)	-	6360	Charges are included in dimension test charge
Cl. No. 4.1.1.2, Annex D, Table No. 5(a), 5(b), 6(a), 6(b), 7 to 12(Tyre Dimension_Outer Diameter of Tyre)	-	6360	Charges are included in dimension test charge
Cl. No. 4.2 & E-1.2, Annex E, Table No. 13(Load/Speed Performance Test)	-	19200	Charges are inclusive of all parameters of Load/Speed Performance Test requirements
Cl. No. 4.4, G-1, G-6.1 and G-6.3, Annex G, Table No.15 to 17(Tyre Strengtrh Test (Plunger Test))	-	10320	Charges are inclusive of all parameters of Tyre Strength Test (Plunger Test) requirements
Cl. No. 4.5, H-4 & E-1.2 Annex H, Table No. 18(Endurance Test)	-	78000	Charges are inclusive of all parameters of Endurance Test requirements
Cl. No. 4.6,Annex-D(Tread Wear Indicators)	-	6360	Charges are included in dimension test charge
Cl. No. 5.1(a) to 5.1 (u)(Markings)	-	6360	Charges are included in dimension test charge
Cl. No. 5.2, Annex H, Table No. 19 & 20(Arrangement of Tyre Markings)	-	6360	Charges are included in dimension test charge

11 Jan, 2028

-
-

2025

The Automotive Research Association of India

7106935

IS 15636 (2022)

Automotive vehicles - Pneumatic tyres for commercial vehicles - Diagonal and radial ply

94860 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.2.2(Technical specification-Declaration)	-	0	-
5(Marking)	-	6360	Dimensional Test Charge. Charges inclusive of all dimensional test requirements.
4.1(Tyre dimension- Section Width)	-	6360	Charges inclusive of all dimensional test requirements.
4.1(Tyre dimension- Outer diameter)	-	6360	Charges inclusive of all dimensional test requirements.
4.1.1(Tread wear Indicator)	-	6360	Charges inclusive of all dimensional test requirements.
4.5(Tyre strength (Plunger test))	-	10320	Charges inclusive of all Tyre strength (Plunger) test requirements.
4.2(Endurance test-Change in diameter)	-	78000	Charges inclusive of all endurance test requirements.
4.3(Load & Speed test)	-	19200	Charges inclusive of all load & speed test requirements.
Cl. No. 4.1.1.1, Annex A, Table No. 6 to 28(Tyre Dimension_Section Width of Tyre)	-	6360	Charges inclusive of all dimensional test requirements.
Cl. No. 4.1.1.2, Annex A, Table No. 6 to 28(Tyre Dimension_Outer Diameter of Tyre)	-	6360	Charges inclusive of all dimensional test requirements.
Cl. No. 4.2, Annex B, Table No. 29(Endurance Test)	-	78000	Charges inclusive of all endurance test requirements.
Cl. No. 4.2.5, Annex B, Table No. 29(Second Endurance Test)	-	78000	Charges inclusive of all endurance test requirements.
Cl. No. 4.3, Annex C, Table No. 18(Load/ Speed Performance Test)	-	19200	Charges inclusive of all load & speed test requirements.
Cl. No. 4.4, Annex-A(Tread Wear Indicators)	-	6360	Charges inclusive of all dimensional test requirements.
Cl. No. 4.5, Annex D, Table No.30 to 33(Tyre Strength Test (Plunger Test)Test)	-	10320	Charges inclusive of all Tyre strength (Plunger) test requirements.
Cl. No. 5.1(a) to (m)(Markings)	-	6360	Charges inclusive of all dimensional test requirements.
Cl. No. 5.2, Annex E,(Arrangement of Tyre Markings)	-	6360	Charges inclusive of all dimensional test requirements.
Cl. No. 4.1.1.1, Annex A, Table No. 6 to 28(Tyre Dimension_Section Width of Tyre)	-	6360	Charges inclusive of all dimensional test requirements.
Cl. No. 4.1.1.2, Annex A, Table No. 6 to 28(Tyre Dimension_Outer Diameter of Tyre)	-	6360	Charges inclusive of all dimensional test requirements.
Cl. No. 4.2, Annex B, Table No. 29(Endurance Test)	-	78000	Charges inclusive of all endurance test requirements.
Cl. No. 4.2.5, Annex B, Table No. 29(Second Endurance Test)	-	78000	Charges inclusive of all endurance test requirements.
Cl. No. 4.3, Annex C, Table No. 18(Load/ Speed Performance Test)	-	19200	Charges inclusive of all load & speed test requirements.
Cl. No. 4.4, Annex-A(Tread Wear Indicators)	-	6360	Charges inclusive of all dimensional test requirements.
Cl. No. 4.5, Annex D, Table No.30 to 33(Tyre Strength Test (Plunger Test)Test)	-	10320	Charges inclusive of all Tyre strength (Plunger) test requirements.
Cl. No. 5.1(a) to (m)(Markings)	-	6360	Charges inclusive of all dimensional test requirements.
Cl. No. 5.2, Annex E,(Arrangement of Tyre Markings)	-	6360	Charges inclusive of all dimensional test requirements.

11 Jan, 2028

-
-

2026

The Automotive Research Association of India

7106935

IS 15633 (2022)

Automotive vehicles - pneumatic tyres for passenger car vehicles - diagonal and radial ply

94860 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.2.2,Anx-J(Technical specification-Declaration)	-	0	-
5(Marking)	-	6360	Dimension Test Charge. Charges are inclusive of all dimension test requirements
4.1(Tyre dimension- Section Width)	-	6360	Charges are included in dimension test charge
4.1(Tyre dimension- Outer diameter)	-	6360	Charges are included in dimension test charge
4.5(Tread wear Indicator)	-	6360	Charges are included in dimension test charge
4.6(Tyre strength (Plunger test))	-	10320	Charges are inclusive of all parameters of Tyre Strength Test
4.3(Endurance test)	-	78000	Charges are inclusive of all parameters of endurance test
4.2(Load & Speed test)	-	19200	Charges are inclusive of all parameters of load/speed performance tests requirements
4.4(Bead Unseating Resistance)	-	8580	Charges are inclusive of all parameters of Bead Unseating Resistance Tests for Tubeless Tyre
Cl. No. 4.1.1.1, Annex A, B Table No. 9 to 15 & 16(Tyre Dimension_Section Width of Tyre)	-	6360	Charges are included in dimension test charge
Cl. No. 4.1.1.2, Annex A, B Table No. 9 to 15 & 16(Tyre Dimension_Outer Diameter of Tyre)	-	6360	Charges are included in dimension test charge
Cl. No. 4.2, Annex C, Table No. 17(Load/Speed Performance Test)	-	19200	Charges are inclusive of all parameters of load/speed performance tests requirements
Cl. No. 4.3, Annex D, Table No. 18(Endurance Test)	-	78000	Charges are inclusive of all parameters of endurance test
Cl. No. 4.4, Annex E, Table No.19 to 21(Bead Unseating Resistance Test)	-	8580	Charges are inclusive of all parameters of Bead Unseating Resistance Tests for Tubeless Tyre
Cl. No. 4.5, Annex-B(Tread Wear Indicators)	-	6360	Charges are included in dimension test charge
Cl. No. 4.6, Annex-F, Table No. 22 to 24(Tyre Strength Test (Plunger Test))	-	10320	Charges are inclusive of all parameters of Tyre Strength Test
Cl. No. 5.1 (a) to 5.1 (n)(Markings)	-	6360	Charges are included in dimension test charge
Cl. No. 5.4, Annex H,(Arrangement of Tyre Markings)	-	6360	Charges are included in dimension test charge
Cl. No. 4.1.1.1, Annex A, B Table No. 9 to 15 & 16(Tyre Dimension_Section Width of Tyre)	-	6360	Charges are included in dimension test charge
Cl. No. 4.1.1.2, Annex A, B Table No. 9 to 15 & 16(Tyre Dimension_Outer Diameter of Tyre)	-	6360	Charges are included in dimension test charge
Cl. No. 4.2, Annex C, Table No. 17(Load/Speed Performance Test)	-	19200	Charges are inclusive of all parameters of load/speed performance tests requirements
Cl. No. 4.3, Annex D, Table No. 18(Endurance Test)	-	78000	Charges are inclusive of all parameters of endurance test
Cl. No. 4.4, Annex E, Table No.19 to 21(Bead Unseating Resistance Test)	-	8580	Charges are inclusive of all parameters of Bead Unseating Resistance Tests for Tubeless Tyre
Cl. No. 4.5, Annex-B(Tread Wear Indicators)	-	6360	Charges are included in dimension test charge
Cl. No. 4.6, Annex-F, Table No. 22 to 24(Tyre Strength Test (Plunger Test))	-	10320	Charges are inclusive of all parameters of Tyre Strength Test
Cl. No. 5.1 (a) to 5.1 (n)(Markings)	-	6360	Charges are included in dimension test charge
Cl. No. 5.4, Annex H,(Arrangement of Tyre Markings)	-	6360	Charges are included in dimension test charge
4.2.7 (Amendment -1)(Load/Speed Performance Test for Run Flat Tyres)	-	19200	Charges are inclusive of all parameters of load/speed performance tests requirements
4.2.8 (Amendment -1)(Load/Speed Performance Test for Extended Mobility Tyres (EMT))	-	19200	Charges are inclusive of all parameters of load/speed performance tests requirements

11 Jan, 2028

-
-

2027

The Automotive Research Association of India

7106935

IS 2835 (1987)

Specification for flat transparent sheet glass (Third Revision)

Sheet Glass

25774 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(CLASSIFICATION)	-	0	Required to be provided along with samples.
4.1(Material)	-	5904	Combined charges for Clause 4.1, 4.3, 5.2 and 5.4
4.1.1(Material)	-	5904	Combined charges for Clause 4.1, 4.3, 5.2 and 5.4
4.2-Table 1 & Cl 5.1(Thickness )	-	6149	-
4.2-Table 1(Length )	-	6013	Combined charges for Length and Width.
4.2-Table 1(Width)	-	6013	Combined charges for Length and Width.
4.3-Table 2-i(Gaseous inclusion)	-	5904	Combined charges for Clause 4.1, 4.3, 5.2 and 5.4
4.3-Table 2-ii(Opaque gaseous inclusion)	-	5904	Combined charges for Clause 4.1, 4.3, 5.2 and 5.4
4.3-Table 2-iii(Knots, dirts and stones)	-	5904	Combined charges for Clause 4.1, 4.3, 5.2 and 5.4
4.3-Table 2-iv & Cl 5.2(Scratches, rubs and crush)	-	5904	Combined charges for Clause 4.1, 4.3, 5.2 and 5.4
4.3-Table 2-v & Cl 5.3(Bow)	-	7708	-
4.3-Table 2-vi & Cl 5.4(Reams, Light Strings and lines)	-	5904	Combined charges for Clause 4.1, 4.3, 5.2 and 5.4
4.3-Table 2-vii(Waviness)	-	5904	Combined charges for Clause 4.1, 4.3, 5.2 and 5.4
4.3-Table 2-viii(Sulphur stains)	-	5904	Combined charges for Clause 4.1, 4.3, 5.2 and 5.4
4.3-Table 2-ix(Corner breakage and chip)	-	5904	Combined charges for Clause 4.1, 4.3, 5.2 and 5.4
4.3.1-Table 2A-i(Allowable Cluster of Defects for AA Quality at Central area)	-	5904	Combined charges for Clause 4.1, 4.3, 5.2 and 5.4
4.3.1-Table 2A-i(Allowable Cluster of Defects for AA Quality at Outer area)	-	5904	Combined charges for Clause 4.1, 4.3, 5.2 and 5.4
4.3.1-Table 2A-ii(Allowable Cluster of Defects for A Quality at Central area)	-	5904	Combined charges for Clause 4.1, 4.3, 5.2 and 5.4
4.3.1-Table 2A-ii(Allowable Cluster of Defects for A Quality at Outer area)	-	5904	Combined charges for Clause 4.1, 4.3, 5.2 and 5.4
4.3.1-Table 2A-iii(Allowable Cluster of Defects for B Quality at Central area)	-	5904	Combined charges for Clause 4.1, 4.3, 5.2 and 5.4
4.3.1-Table 2A-iii(Allowable Cluster of Defects for B Quality at Outer area)	-	5904	Combined charges for Clause 4.1, 4.3, 5.2 and 5.4
3.1(CLASSIFICATION)	-	0	Required to be provided along with samples.

11 Jan, 2028

-
-

2028

The Automotive Research Association of India

7106935

IS 16192 : Part 1 (2014)

Automotive vehicles - Wheel rims for two and three wheeled vehicles: Part 1 light alloy wheel rims - Method of tests and requirements

192500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.1(Rotation Bending Fatigue Test (Dynamic Cornering Fatigue Test))	-	62000	2W CFT charges with Marking
4.2.2(Rotation Bending Fatigue Test (Dynamic Cornering Fatigue Test) No. of cycle 105)	-	62000	CFT
4.3.1(Radial Load Durability Test)	-	67000	RFT
4.3.2(Radial load durability tests ,No of cycle 5 x 105)	-	67000	RFT
4.4.1(Radial Impact Resistance Test)	-	15000	Impact
4.4.2(Radial Impact Resistance Test)	-	15000	Impact
4.5.1(Torsion Moment Test)	-	45000	Torsion Test
4.5.2(Torsion Moment Test no of cycle is required 105 )	-	45000	Torsion test
4.6.1(Air Leak Test (Tubeless Tyres Wheel Rim))	-	10000	Air Leak test
4.6.2(Air Leak Test (Tubeless Tyres Wheel Rim), 2 minutes)	-	10000	Air Leak test

11 Jan, 2028

-
-

2029

The Automotive Research Association of India

7106935

IS 16192 : Part 2 (2014)

Automotive vehicles - Wheel rims for two and three wheeled vehicles: Part 2 sheet metal wheel rims - Method of tests and requirements

103000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.3.4(a) For three wheeled vehicles: 18000 load cycle)	-	32000	3W CFT charges with Marking
4.2.3.4(b) For two wheeled vehicles:no of cycle 105 )	-	32000	2W CFT charges with Marking
4.2.4(Dynamic Radial Fatigue Test (RFT))	-	71000	RFT

11 Jan, 2028

-
-

2030

The Automotive Research Association of India

7106935

IS 9438 (2018)

Performance requirements and methods of tests for wheels/ rims for trucks and buses (First Revision)

210000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.1 table 1(cl 5.2 dynamic radial Fatigue test (For Disc Wheels and wheels with Demountable Rims, Test factors for dynamic Radial Fatigue Test Loading method and Minimum No.of Performnace cycle clause 5.2.2 and 5.2.4 table 2)	-	52000	CFT
Cl 5.1 table 1 i)(material Ferrous rim diametre 13 Accelerated test Factor 1.60)	-	52000	CFT
Cl 5.1 table 1 i)(material Ferrous rim diametre 14 Accelerated Test Factor 1.60)	-	52000	CFT
Cl 5.1 table 1 i)(material Ferrous rim diametre 15 Accelerated Test Factor 1.60)	-	52000	CFT
Cl 5.1 table 1 ii)(material Ferrous rim diametre 16 and aboveAccelerated Test Factor 1.45)	-	52000	CFT
Cl 5.1 table 1 iii)(material Ferrous rim any diametreAccelerated Test Factor 1.10)	-	52000	CFT
Cl 5.1 table 1 ii)(material Ferrous rim any diametre and above Accelerated Test Factor 1.30)	-	52000	CFT
Cl 5.1 table 1 iv)(material Alluminum rim diametre 16 and above Accelerated Test Factor 1.35)	-	62000	CFT
Cl 5.1 table 1 iv)(material Alluminum rim diametre 16 and above Accelerated Test Factor 1.63)	-	62000	CFT
Cl 5.1 table 1 v)(material Alluminum rim diametre 17.5 and larger Accelerated Test Factor 1.35)	-	62000	CFT
Cl.5.2 table 2(Cl 5.2 dynamic radial Fatigue test (For Disc Wheels and wheels with Demountable Rims, Test factors for dynamic Radial Fatigue Test Loading method and Minimum No.of Performnace cycle clause 5.2.2 and 5.2.4 table 2)	-	68000	RFT
Cl.5.2 table 2 i(Material Ferrous rim diametre 13 (5˚˚ drop centre) Accelerated Test Factor 2.2, (Inset or Outset - All ))	-	68000	RFT
Cl.5.2 table 2 i(Material Ferrous rim diametre 13 and (5˚˚ drop centre) Accelerated Test Factor 1.8, (Inset or Outset - All ))	-	68000	RFT
Cl.5.2 table 2 i(Material Ferrous rim diametre 14 and (5˚˚ drop centre) Accelerated Test Factor 2.2, (Inset or Outset - All ))	-	68000	RFT
Cl.5.2 table 2 i(Material Ferrous rim diametre 14 and (5˚˚ drop centre) Accelerated Test Factor 1.8, (Inset or Outset - All ))	-	68000	RFT
Cl.5.2 table 2 i(Material Ferrous rim diametre 15 and (5˚˚ drop centre) Accelerated Test Factor 2.2, (Inset or Outset - All ))	-	68000	RFT
Cl.5.2 table 2 i(Material Ferrous rim diametre 15 and (5˚˚ drop centre) Accelerated Test Factor 1.8, (Inset or Outset - All ))	-	68000	RFT
Cl.5.2 table 2 i(Material Ferrous rim diametre 16 and (5˚˚ drop centre) Accelerated Test Factor 2.2, (Inset or Outset - All ))	-	68000	RFT
Cl.5.2 table 2 i(Material Ferrous rim diametre 17 and (5˚˚ drop centre) Accelerated Test Factor 2.2, (Inset or Outset - All ))	-	68000	RFT
Cl.5.2 table 2 i(Material Ferrous rim diametre 17 and (5˚˚ drop centre) Accelerated Test Factor 1.8, (Inset or Outset - All ))	-	68000	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 15 Accelerated Test Factor 2.0 , (Inset or Outset - All ))	-	68000	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 15 and Accelerated Test Factor 1.9 , (Inset or Outset - All ))	-	68000	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 15 and Accelerated Test Factor 1.8 , (Inset or Outset - All ))	-	68000	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 15 and Accelerated Test Factor 1.7 , (Inset or Outset - All ))	-	68000	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 15 and Accelerated Test Factor 1.6 , (Inset or Outset - All ))	-	68000	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 17 and Accelerated Test Factor 2.0, (Inset or Outset - All ))	-	68000	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 17 and Accelerated Test Factor 1.9, (Inset or Outset - All ))	-	68000	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 17 and Accelerated Test Factor 1.8, (Inset or Outset - All ))	-	68000	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 17 and Accelerated Test Factor 1.7, (Inset or Outset - All ))	-	68000	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 17 and Accelerated Test Factor 1.6, (Inset or Outset - All ))	-	68000	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 18 and Accelerated Test Factor 2.0, (Inset or Outset - All ))	-	68000	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 18 and Accelerated Test Factor 1.9, (Inset or Outset - All ))	-	68000	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 18 and Accelerated Test Factor 1.8, (Inset or Outset - All ))	-	68000	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 18 and Accelerated Test Factor 1.7, (Inset or Outset - All ))	-	68000	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 20 and Accelerated Test Factor 1.6, (Inset or Outset - All ))	-	68000	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 20 and Accelerated Test Factor 2.0, (Inset or Outset - All ))	-	68000	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 20 and Accelerated Test Factor 1.9 (Inset or Outset - All ))	-	68000	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 20 and Accelerated Test Factor 1.8 (Inset or Outset - All ))	-	68000	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 22 and Accelerated Test Factor 2.0, (Inset or Outset - All ))	-	68000	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 24 and Accelerated Test Factor 1.9 , (Inset or Outset - All ))	-	68000	RFt
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 22 and Accelerated Test Factor 1.8, (Inset or Outset - All ))	-	68000	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 22 and Accelerated Test Factor 1.7, (Inset or Outset - All ))	-	68000	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 22 and Accelerated Test Factor 1.6, (Inset or Outset - All ))	-	68000	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 24 and Accelerated Test Factor 2.0 , (Inset or Outset - All ))	-	68000	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 24 and Accelerated Test Factor 1.8 , (Inset or Outset - All ))	-	68000	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 24 and Accelerated Test Factor 1.7 , (Inset or Outset - All ))	-	68000	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 24 and Accelerated Test Factor 1.6 , (Inset or Outset - All ))	-	68000	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 17.5 HC and Accelerated Test Factor 2.0 , (Inset or Outset - All ))	-	68000	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 17.5 HC and Accelerated Test Factor 1.9 , (Inset or Outset - All ))	-	68000	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 17.5 HC and Accelerated Test Factor 1.8 , (Inset or Outset - All ))	-	68000	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 17.5 HC and Accelerated Test Factor 1.7 , (Inset or Outset - All ))	-	68000	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 17.5 HC and Accelerated Test Factor 1.6 , (Inset or Outset - All ))	-	68000	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 19.5 and Accelerated Test Factor 2.0 , (Inset or Outset - All ))	-	68000	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 19.5 and Accelerated Test Factor 1.9 , (Inset or Outset - All ))	-	68000	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 19.5 and Accelerated Test Factor 2.0 , (Inset or Outset - All ))	-	68000	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 19.5 and Accelerated Test Factor 2.0 , (Inset or Outset - All ))	-	68000	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 22.5 and Accelerated Test Factor 2.0 , (Inset or Outset - All ))	-	68000	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 22.5 and Accelerated Test Factor 1.9 , (Inset or Outset - All ))	-	68000	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 22.5 and Accelerated Test Factor 1.8 , (Inset or Outset - All ))	-	68000	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 22.5 and Accelerated Test Factor 1.7 , (Inset or Outset - All ))	-	68000	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 22.5 and Accelerated Test Factor 1.6 , (Inset or Outset - All ))	-	68000	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 24.5 and Accelerated Test Factor 2.0 , (Inset or Outset - All ))	-	68000	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 24.5 and Accelerated Test Factor 19 , (Inset or Outset - All ))	-	68000	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 24.5 and Accelerated Test Factor 1.8 , (Inset or Outset - All ))	-	68000	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 24.5 and Accelerated Test Factor 1.7 , (Inset or Outset - All ))	-	68000	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 24.5 and Accelerated Test Factor 1.6 , (Inset or Outset - All ))	-	68000	RFT
Cl.5.2 table 2 iii)(Material Aluminium rim diametre 16 and Accelerated Test Factor 2.8 , (Inset or Outset - 127 or more ))	-	148000	RFT
Cl.5.2 table 2 iii)(Material Aluminium rim diametre 16 and Accelerated Test Factor 2.0 , (Inset or Outset - 127 or more ))	-	148000	RFT
Cl.5.2 table 2 iv)(Material Aluminium rim diametre 17.5 and larger . Accelerated Test Factor 2.8 , (Inset or Outset - All ))	-	148000	RFT
Cl.5.2 table 2 iv)(Material Aluminium rim diametre 17.5 and larger . Accelerated Test Factor 2.0 , (Inset or Outset - All ))	-	148000	RFT
Cl.5.3 table 3 (Cl 5.3 dynamic Cornering Fatigue test (For wheels with Demountable Rims), Test Load factors for Wheels with demountable Rims - Dynamic cornerning Fatigue test clause 5.3.4 and 5.3.5 table 3)	-	52000	CFT
Cl.5.3 table 3 i) (Accelerated test factor 1.9 Coefficient of friction 0.7)	-	52000	CFT
Cl.5.3 table 3 i) (Material Ferrous All, Accelerated test factor 1.5 Coefficient of friction 0.7)	-	52000	CFT
Cl 5.1 table 1(Cl.5.1 dynamic Cornering Fatigue test (For Disc Wheel Rims))	-	52000	CFT

11 Jan, 2028

-
-

2031

The Automotive Research Association of India

7106935

IS 16192 : Part 3 (2018)

Automotive vehicles - Wheel rims for two and three wheeled vehicles: Part 3 Spoke Wheel Rims ---Method of tests and requirements

18360 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.2(Strength Requirements refer table -1 & table -2)	-	64500		Full Test
4.2(Strength Requirements refer table -1 & table -2)	-	64500		Full Test

11 Jan, 2028

-
-

2032

The Automotive Research Association of India

7106935

IS 9436 (2018)

Performance requirements and methodsof test for wheels for passenger cars, quadricycles and mini goods cariers (First Revision)

103000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.1 table 2 (Cl 5.1 dynamic cornering fatigue test. Test factors and minimum cycle for requirements for wheels in normal Highway service dynamic cornering fatigue clause 5.1.3 5.1.4 and A-1 table 2)	-	32000	CFT- Ferrous
Cl 5.1 table 2 i)( ferrous all)	-	32000	CFT- Ferrous
Cl 5.1 table 2 ii)( cold formed aluminium 5000 series)	-	60000	CFT- AL
Cl 5.1 table 2 iii)( aluminium cast and forged)	-	60000	CFT- AL
Cl 5.1 table 4(Cl.5.2dynamic cornering fatigue test.table 4 factors and minimum cycle requirements for temporary use wheels clause5.1.4 Amd-1)	-	32000	CFT- Ferrous
Cl 5.1 table 4 i)( ferrous all)	-	32000	CFT- Ferrous
Cl 5.1 table 4 ii)( cold formed aluminium 5000 series)	-	60000	CFT- AL
Cl 5.1 table 4 iii)( aluminium cast and forged)	-	60000	CFT- AL
Cl.5.2 table 3(Cl 5.2 dynamic radial Fatigue testTest factors and minimum cycle for requirements for wheels in normal Highway service dynamic Radial fatigue test clause 5.2.3 5.2.4 and A-1 table 3)	-	71000	RFT- Ferrous
Cl 5.2 table 3 i)(ferrous all)	-	71000	RFT- Ferrous
Cl 5.2 table 3 i)(Alluminium All)	-	100750	RFT- AL
Cl.5.2 table 5(Cl 5.2 dynamic radial Fatigue test Test factors and minimum cycle for temporary use wheels Dynamic Radial fatigue test clause 5.2.4 and A-1 table 5)	-	71000	RFT- Ferrous
Cl 5.2 table 5 i)(ferrous all)	-	71000	RFT- Ferrous
Cl 5.2 table 5 i)(Alluminium All)	-	100750	RFT- AL

11 Jan, 2028

-
-

2033

The Automotive Research Association of India

7106935

IS 15627 (2005)

Automotive vehicles - Pneumatic tyres i?or two and three - Wheeled motor vehicles - Specification

71250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4/4.1.1.1- Refer Annex C Col 2 and Annex D(test method )(Tyre dimensions/Section width)	-	6360	Dimension Test Charge. Charges are inclusive of all parameters of dimension test requirements
4/4.1.1.2- Refer Annex C Col 2 and Annex D(test method )(Tyre outer diameter)	-	6360	Charges are included in dimension test charge
4/4.2.1 /4.2.2/4.2.3,Annex E ,Table 12(Load/Speed Performance Test)	-	19200	Charges are inclusive of all parameters of Load/Speed Performance Test requirements
4/4.2.4(Outer diameter of the .tyre after the 6 hrs of the Load/Speed Performance Test shall not differ from the outer diameter measured before the test by more than + 3.5 percent.)	-	19200	Charges are included in Load/Speed Performance Test charge
4/4.2.5 Refer Annex C (The tyre overall width measured at the end of the load/speed performance test shall not exceed the value specified in 4.1.l.l(d) or 4.1.l.l(f) as applicable.)	-	6360	Charges are included in Load/Speed Performance Test charge
4.4,Refer Table 14 to 16 and Annex G(Tyre Strength Test (Plunger Test) )	-	10320	Charges are inclusive of all parameters of Tyre Strength Test (Plunger Test) requirements
4.5 refer Table 17 and Annex H(Endurance Test)	-	78000	Charges are inclusive of all parameters of Endurance Test requirements
4.6/4.6.1(Tread Wear Indicators)	-	6360	Charges are included in dimension test charge
4.6.2 Refer Annex D(Method of measurement)(Tread Wear Indicators)	-	6360	Charges are included in dimension test charge
4.6.3(Tread Wear Indicators)	-	6360	Charges are included in dimension test charge
5(Markings)	-	6360	-
5, Annex J(Arrangement of tyre markings)	-	6360	-

11 Jan, 2028

-
-

2034

The Automotive Research Association of India

7106935

IS 15636 (2012)

Automotive vehicles - Pneumatic tyres for commercial vehicles - Diagonal and radial ply - Specification (First Revision)

94860 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5, 8(Marking)	-	6360	Dimension Test Charge. Charges are inclusive of all dimension test requirements
3.1.1(Type of pnuamitic tyre)	-	0	Charges are included in dimension test charge
3.17(Tyre-Size Designation)	-	0	Charges are included in dimension test charge
3.26(Load Index)	-	0	Charges are included in dimension test charge
3.28(Speed symbol)	-	0	Charges are included in dimension test charge
4.1.1(Section width of tyre)	-	0	Charges are included in dimension test charge
4.1.1.2(Tyre outer diameter)	-	0	Charges are included in dimension test charge
4.2(Endurance test)	-	78000	Charges are inclusive of all parameters of Endurance Test
4.3.1(Load/Speed performance test)	-	19200	Charges are inclusive of all parameters of Load/Speed performance Test
4,4,1(Tread -wear indicators)	-	0	Charges are included in dimension test charge
4.4,2(Tread -wear indicators)	-	0	Charges are included in dimension test charge
4.4.4(Tread -wear indicators)	-	0	Charges are included in dimension test charge
4.5(Tyre strength test (Plunger rest))	-	10320	Charges are inclusive of all parameters of Tyre strength test (Plunger test)

11 Jan, 2028

-
-

2035

The Automotive Research Association of India

7106935

IS 15633 (2005)

Automotive vehicles - Pneumatic tyres for passenger car vehicles - Diagonal and radial ply - Specification

94860 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4/4.1.1.1- Refer Annex B Col 2 and Annex D(test method )(Tyre dimensions/Section width)	-	6360	Dimension Test Charge. Charges are inclusive of all dimension test requirements
4/4.1.1.2- Refer Annex B Col 2 and Annex D(test method )(Tyre outer diameter)	-	6360	Charges are included in dimension test charge
4/4.2.1 /4.2.2/4.2.3,Refer Annex D ,Table 13(Load/Speed Performance Test)	-	19200	Charges are inclusive of all parameters of load/speed performance tests requirements
4.2.4(Outer diameter of the .tyre after the 6 hrs of the Load/Speed Performance Test shall not differ from the outer diameter measured before the test by more than + 3.5 percent.)	-	6360	Charges are included in load/speed performance test charge
4.3/4.3.1/4.3.2 Refer Annex E and Table 14( Endurance Test)	-	78000	Charges are inclusive of all parameters of endurance test
4.4/4.4.1/4.4.2 Refer Annex F and Table 15 and 16(Bead Unseating Resistance Test for Tubeless Tyre )	-	8580	Charges are inclusive of all parameters of Bead Unseating Resistance Tests for Tubeless Tyre
4.5/4.5.1(Tread-Wear -Indicators)	-	6360	Charges are included in dimension test charge
4.5.2(Each tread-wear indicator shall individually provide a means of indicating with a tolerance of +0.60 ,−0.00 mm when the tread grooves are no longer more than 1.6 mm deep.’)	-	6360	Charges are included in dimension test charge
4.6. Refer Annex G ,Table 17 and 18(Tyre.Strength Test)	-	10320	Charges are inclusive of all parameters of Tyre.Strength Test
5(Markings)	-	6360	-
5.4, Annex J(Arrangement of tyre markings)	-	6360	-

11 Jan, 2028

-
-

2036

The Automotive Research Association of India

7106935

IS/ISO 6742 : PART 2 (2015)

Cycles - Lighting and retro - Reflective devices: Part 2 retro - Reflective devices (First Revision)

48000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1 -Tables 4, 5, 6, 7, 8, 9 or 10(Reflectors-CIL value)	-	21504	--
6-Table 15( Colorimetric requirements)	-	10080	--
7.1.2.2(Reflectors-Temperature resistance test)	-	24600	--
7.1.2.3(Reflectors- Impact test (except for conventional reflector of Group A))	-	5000	--
7.1.2.4(Reflectors-Moisture resistance test)	-	5600	--
7.1.2.5(Reflectors- Resistance to fuels)	-	5088	--
7.1.2.6(Reflectors- Resistance to lubricating oils)	-	5088	--

11 Jan, 2028

-
-

2037

The Automotive Research Association of India

7106935

IS 2553 : Part 1 (2018)

Safety glass - Specification: Part 1 architectural, building and general uses (Fourth Revision)

149727 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2.1 (Thickness -IS 17004 & IS 14900)	-	5124	Test Charges for thickness measurement
5.2.2.1( Dimensions- Width )	-	5011	Combined Test Charges for Dimension and Squareness
5.2.2.1( Dimensions- Length)	-	5011	Combined Test Charges for Dimension and Squareness
4(Types)	-	6039	Combined Test Charges for General Requirements
5.1.1(General)	-	6039	Combined Test Charges for General Requirements
5.1.2(Optical Faults-IS 14900)	-	6039	Combined Test Charges for General Requirements
5.1.2(Spot Faults of category A/B/C/D -IS 14900)	-	6039	Combined Test Charges for General Requirements
5.1.2(Reams, Strings and Lines-IS 14900)	-	6039	Combined Test Charges for General Requirements
5.1.2(Linear / Extended Faults -IS 14900)	-	6039	Combined Test Charges for General Requirements
5.2.2.2( Squareness)	-	5011	Combined Test Charges for Dimension and Squareness
5.2.3 (Fragmentation Test- IS 17004)	-	6271	Test charges for Fragmentation Test
5.2.4-a( Flatness-Overall bow-IS 17004)	-	6423	Combined Test Charges for Flatness Test
5.2.4-b( Flatness-Roller wave distortion-IS 17005)	-	6423	Combined Test Charges for Flatness Test
5.2.4-c( Flatness-Edge lift-IS 17006)	-	6423	Combined Test Charges for Flatness Test
5.2.4-d( Flatness-Local distortion-IS 17007)	-	6423	Combined Test Charges for Flatness Test
5.2.4.1 (Other distortions)	-	6423	Combined Test Charges for Flatness Test
5.2.5.1( Resistance to shock- IS 17004)	-	5571	Test Charges for Resistance to Shock Test
5.2.5.2( Resistance to human impact- IS 17004)	-	9998	Test Charges for Resistance to Human Impact Test
5.2.8.1 & 5.2.8.3-Table 7(Diameter of Holes & Deviations on holes )	-	5380	Combined Test Charges for Fabrication in Glass
5.2.8.3-Table 8(Deviations on position of holes and Cutouts Location)	-	5380	Combined Test Charges for Fabrication in Glass
5.3.1 (Thickness-IS 17004 & IS 14900)	-	5124	Test Charges for Thickness Test
5.3.2.1( Dimensions and squareness- Width )	-	5149	Combined Test Charges for Dimension, Squareness and Edge Matching
5.3.2.1( Dimensions and squareness- Length)	-	5149	Combined Test Charges for Dimension, Squareness and Edge Matching
5.3.2.1( Dimensions and squareness-Squareness)	-	5149	Combined Test Charges for Dimension, Squareness and Edge Matching
5.3.2.2 (Edge displacement)	-	5149	Combined Test Charges for Dimension, Squareness and Edge Matching
5.3.3( Light Stability Test-IS 17004)	-	26840	Test Charges for Light Stability Test
5.3.4( Boil and Bake Tests-IS 17004)	-	8611	Combined Test Charges for Boil and Bake Test
5.3.4( Boil and Bake Tests-IS 17004)	-	8611	Combined Test Charges for Boil and Bake Test
5.3.5( Fracture and Adhesion Test-IS 17004)	-	7157	Test Charges for Fracture and Adhesion Test
5.3.6.1( Spot defects in the central area)	-	4920	Combined Test Charges for Defects in Central Area
5.3.6.2 (Linear defects in the central area)	-	4920	Combined Test Charges for Defects in Central Area
5.3.6.3( Defects in the outer area for framed edges)	-	4920	Combined Test Charges for Defects in Central Area
5.3.6.4( Vents)	-	4920	Combined Test Charges for Defects in Central Area
5.3.6.5( Creases and streaks)	-	4920	Combined Test Charges for Defects in Central Area
5.3.6.6( Defects on edge which will not be framed)	-	4920	Combined Test Charges for Defects in Central Area
5.3.7( Humidity Test – Optional)	-	80172	Test Charges for Humidity Test without condensation
5.3.8( Resistance to Human Impact Test)	-	9998	Test Charges for Resistance to Human Impact Test
4(Types)	-	-	-
5.1.1(General)	-	-	-
5.1.2(Optical Faults-IS 14900)	-	-	-
5.1.2(Spot Faults of category A/B/C/D -IS 14900)	-	-	-
5.1.2(Reams, Strings and Lines-IS 14900)	-	-	-
5.1.2(Linear / Extended Faults -IS 14900)	-	-	-
5.2.1 (Thickness -IS 17004 & IS 14900)	-	-	-
5.2.2.1( Dimensions- Width )	-	-	-
5.2.2.1( Dimensions- Length)	-	-	-
5.2.2.2( Squareness)	-	-	-
5.2.3 (Fragmentation Test- IS 17004)	-	-	-
5.2.4-a( Flatness-Overall bow-IS 17004)	-	-	-
5.2.4-b( Flatness-Roller wave distortion-IS 17005)	-	-	-
5.2.4-c( Flatness-Edge lift-IS 17006)	-	-	-
5.2.4-d( Flatness-Local distortion-IS 17007)	-	-	-
5.2.4.1 (Other distortions)	-	-	-
5.2.5.1( Resistance to shock- IS 17004)	-	-	-
5.2.5.2( Resistance to human impact- IS 17004)	-	-	-
5.2.8.1 & 5.2.8.3-Table 7(Diameter of Holes & Deviations on holes )	-	-	-
5.2.8.3-Table 8(Deviations on position of holes and Cutouts Location)	-	-	-
5.3.1 (Thickness-IS 17004 & IS 14900)	-	-	-
5.3.2.1( Dimensions and squareness- Width )	-	-	-
5.3.2.1( Dimensions and squareness- Length)	-	-	-
5.3.2.1( Dimensions and squareness-Squareness)	-	-	-
5.3.2.2 (Edge displacement)	-	-	-
5.3.3( Light Stability Test-IS 17004)	-	-	-
5.3.4( Boil and Bake Tests-IS 17004)	-	-	-
5.3.5( Fracture and Adhesion Test-IS 17004)	-	-	-
5.3.6.1( Spot defects in the central area)	-	-	-
5.3.6.2 (Linear defects in the central area)	-	-	-
5.3.6.3( Defects in the outer area for framed edges)	-	-	-
5.3.6.4( Vents)	-	-	-
5.3.6.5( Creases and streaks)	-	-	-
5.3.6.6( Defects on edge which will not be framed)	-	-	-
5.3.7( Humidity Test – Optional)	-	-	-
5.3.8( Resistance to Human Impact Test)	-	-	-

11 Jan, 2028

-
-

2038

MIGHTY TESTING PRIVATE LIMITED

8185126

IS 302 : Part 1 (2024)

Household and Similar Electrical Appliances â Safety Part 1 General Requirements (Seventh Revision)

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General requirement)	-	500	-
5(General conditions for the tests)	-	500	-
6(Classification)	-	500	-
7(Marking and instructions)	-	1000	-
8.1.1(Protection against live parts in all positions)	-	1000	-
8.1.2(Protection against live parts in openings)	-	1000	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	500	-
8.1.4(Protection against live parts against protective impedance)	-	500	-
8.1.5(Live parts of built-in appliances)	-	500	-
9(Starting of motor operation test requirements and tests)	-	0	-
10.1(Power input)	-	1000	-
10.2(Current input)	-	1000	-
11.1(General)	-	1000	-
11.2(General)	-	1000	-
11.3(Heating)	-	1000	-
11.4(Heating appliances)	-	1000	-
11.5(Motor-operated appliances)	-	1000	-
11.6(Combined appliances)	-	1000	-
11.7(Duration corresponding)	-	1000	-
11.8(Temperature rise)	-	1000	-
12(Charging of metal-ion batteries)	-	1000	-
13(Leakage current and electric strength at operating temperature)	-	2000	-
13.2(Leakage current at operating temperature)	-	0	-
13.3(Electric Strength at operating temperature)	-	0	-
14(Transient Over Voltages)	-	1000	-
15.0(Moisture resistance)	-	2000	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	0	-
15.2(Spillage Test)	-	0	-
15.2(Moisture resistance)	-	0	-
15.3(Humidity Test)	-	0	-
16.0(General)	-	2000	-
16(Leakage current and electric strength)	-	0	-
16.1(General)	-	0	-
16.2(Leakage Current (after Clause 15))	-	0	-
16.3(Electric Strength (after clause 15 and 16.2))	-	0	-
17(Over Load Protection of Transformers and associated circuits)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	0	-
18(Endurance)	-	0	-
18(Endurance)	-	0	-
19(Abnormal Operation)	-	1000	-
19.17(Abnormal operation)	-	0	-
20(Stability and mechanical hazards)	-	1000	-
21(Mechanical Strength)	-	1000	-
20.1(Stability and mechanical hazards)	-	0	-
21.2(Mechanical strength)	-	0	-
21.3(Mechanical strength)	-	0	-
22(Construction)	-	1000	-
22.5(Construction)	-	0	-
22.6(Construction)	-	0	-
22.11(Construction)	-	0	-
22.16(Construction)	-	0	-
22.32(Construction)	-	0	-
22.42(Construction)	-	0	-
23(Internal wiring)	-	1000	-
23.3(Internal wiring)	-	0	-
24(Components)	-	1000	-
25(Supply connection and external flexible cords)	-	1000	-
25(Supply connection and external flexible cords)	-	0	-
25.7(Supply connection and external flexible cords)	-	0	-
25.14(Supply connection and external flexible cords)	-	0	-
25.15(Supply connection and external flexible cords)	-	0	-
26(Terminals for external conductors)	-	1000	-
26.5(Terminals for external conductors)	-	0	-
27(Provision for earthing)	-	1000	-
27.5(Provision for earthing)	-	0	-
28(Screw test and connections)	-	1000	-
28.1(Screws and connections)	-	0	-
29(clearance, creepage distances and solid insulation)	-	1000	-
30.1(Ball pressure test)	-	1000	-
30.2(Glow Wire Test)	-	1000	-
30.2(Needle Flame Test)	-	1000	-
31(Resistance to Rusting)	-	1000	-
32(Radiation Toxicity and Similar Hazards)	-	0	-
A.2(Earth continuity test)	-	0	-
Annex C(Ageing test on motors)	-	0	-
Annex D(Thermal motor protectors)	-	0	-
B.22.1(Construction)	-	0	-
B.22.3(Construction)	-	0	-
B.22.4(Construction)	-	0	-
B.22.5(Construction)	-	0	-

05 May, 2028

-
Exclusions : Cl 19.11.4.1 to Cl 19.11.4.7 (EMI/EMC)

2039

MIGHTY TESTING PRIVATE LIMITED

8185126

IS 15885 : Part 2 : Sec 13 (2012)

Safety of lamp controlgear: Part 2 particular requirements: Sec 13 d.c. or a.c. supplied electronic controlgear for led modules

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	2000	-
8(Protection against accidental contact with live parts)	-	2000	-
9(Terminals)	-	2000	-
10(PROVISION FOR EARTHING)	-	2000	-
11(MOISTURE RESISTANCE)	-	2000	-
12(Electric Strength)	-	2000	-
13(Thermal endurance test for winding of ballasts)	-	0	-
14(Fault conditions)	-	2000	-
15(Transformer heating)	-	3000	-
16(Construction)	-	3000	-
17(Creepage distance and clearances)	-	2000	-
18(Screws, current carrying parts and connections)	-	2000	-
19(Resistance to heat, fire and tracking)	-	4000	-
20(Resistance to corrosion)	-	2000	-
7(Marking)	-	0	-
8("PROTECTION AGAINST ACCIDENTAL CONTACT WITH LIVE PARTS")	-	0	-
9(TERMINALS)	-	0	-
10(PROVISIONS FOR PROTECTIVE EARTHING)	-	0	-
11(MOISTURE RESISTANCE AND INSULATION)	-	0	-
12(ELECTRIC STRENGTH)	-	0	-
13(THERMAL ENDURANCE TEST FOR WINDINGS OF BALLASTS)	-	0	-
14(FAULT CONDITIONS)	-	0	-
15(TRANSFORMER HEATING)	-	0	-
16(CONSTRUCTION)	-	0	-
17(CREEPAGE DISTANCES AND CLEARANCES)	-	0	-
18("SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS")	-	0	-
19(RESISTANCE TO HEAT, FIRE AND TRACKING)	-	0	-
20(RESISTANCE TO CORROSION)	-	0	-
19(Terminals)	-	0	-
4(GENERAL REQUIREMENTS)	-	0	-
5(GENERAL NOTES ON TESTS)	-	0	-
6(CLASSIFICATION)	-	0	-

05 May, 2028

-
Exclusions : 16 (EMI/EMC filter), (Bridging resistor in primary circuit), (Capacitor and RC units), (RF suppression (X-Y capacitors)), (Inductor), (MOV/VDR), (SMPS /Mains Transformer), (PCB material), (Insulated tape), (Heat shrinkage sleeve), (Connector), (Fuse), (Internal wire), (LED), (Opto-coupler), (Opto-coupler), (Enclosures), (Winding wire), (Thin sheet materials), 19 (Metal base PCB for LED), (Transparent cover), (Bobbin)

2040

SHRI BAJRANG TESTING LABS

8183006

IS 4990 (2024)

PLYWOOD FOR CONCRETE SHUTTERING WORKS SPECIFICATION (Fourth Revision)

ALL

17900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Timber)	-	0	-
Cl-5.2(Adhesives for Bonding of Veneers)	-	0	-
Cl-6.1(Manufacture)	-	0	-
Cl-6.2(Manufacture ( Thickness of veneers))	-	0	-
Cl-6.3(Manufacture ( Physical and mechanical properties of veneers))	-	0	-
Cl-6.4, 6.7(Manufacture (Plywood for concrete shuttering))	-	0	-
Cl-6.5(Manufacture (Scarf joints))	-	0	-
Cl-6.6(Manufacture ( Preservative treatment))	-	0	-
Cl-7.1(Dimensions -length)	-	1000	-
Cl-7.2(Thickness)	-	500	-
Cl-7.3(Squareness)	-	500	-
Cl-8.1, 8.2(Workmanship and finish)	-	500	-
Cl-10.3(Moisture Content)	-	1000	-
Cl-10.4.1(Glue Adhesion in Dry State - Glue Shear Strength)	-	1000	-
Cl-10.4.2(Glue Adhesion in Dry State - Adhesion of Plies)	-	1000	-
Cl-10.5, 10.5.1(Resistance to Water Test)	-	1000	-
Cl-10.5.1.1(Water Resistance Test-Glue shear strength)	-	1000	-
Cl-10.5.1.2(Water Resistance Test-Adhesion of plies)	-	1000	-
Cl-10.5.2(Water Resistance Test (Alternate method))	-	1000	-
Cl-10.6(Water resistance test (Concrete shuttering Plywood))	-	1000	-
Cl-10.7.1, Table-2(Mycological Test- Glue shear strengt)	-	1000	-
Cl-10.7.2(Mycological Test- Adhesion of plies)	-	1000	-
Cl-10.8(Tensile Strength)	-	1000	-
Cl-10.9, Table-3 (i)(Along (parallel to the grain direction of the face veneer))	-	1000	-
Cl-10.9, Table-3 (ii)(Across (perpendicular to the grain direction of the face veneer))	-	1000	-
Cl-10.10, Table-4 (i) a(Wet Bending Strength -Modulus of Elasticity (MOE),- Average)	-	1000	-
Cl-10.10, Table-4 (i) b(Wet Bending Strength - Modulus of Elasticity (MOE),- Minimum individual)	-	1000	-
Cl-10.11(Retention of Preservative)	-	1000	-
Cl-10.12(Formaldehyde Content Test)	-	2500	-
Cl-10.13(Steady-State Formaldehyde Emission Test)	-	0	-
Cl-5.1(Timber)	-	0	-
Cl-5.2(Adhesives for Bonding of Veneers)	-	0	-
Cl-6.1(Manufacture)	-	0	-
Cl-6.2(Manufacture ( Thickness of veneers))	-	0	-
Cl-6.3(Manufacture ( Physical and mechanical properties of veneers))	-	0	-
Cl-6.4, 6.7(Manufacture (Plywood for concrete shuttering))	-	0	-
Cl-6.5(Manufacture (Scarf joints))	-	0	-
Cl-6.6(Manufacture ( Preservative treatment))	-	0	-
Cl-7.1(Dimensions -length)	-	0	-
Cl-7.2(Thickness)	-	0	-
Cl-7.3(Squareness)	-	0	-
Cl-8.1, 8.2(Workmanship and finish)	-	0	-
Cl-10.3(Moisture Content)	-	0	-
Cl-10.4.1(Glue Adhesion in Dry State - Glue Shear Strength)	-	0	-
Cl-10.4.2(Glue Adhesion in Dry State - Adhesion of Plies)	-	0	-
Cl-10.5, 10.5.1(Resistance to Water Test)	-	0	-
Cl-10.5.1.1(Water Resistance Test-Glue shear strength)	-	0	-
Cl-10.5.1.2(Water Resistance Test-Adhesion of plies)	-	0	-
Cl-10.5.2(Water Resistance Test (Alternate method))	-	0	-
Cl-10.6(Water resistance test (Concrete shuttering Plywood))	-	0	-
Cl-10.7.1, Table-2(Mycological Test- Glue shear strengt)	-	0	-
Cl-10.7.2(Mycological Test- Adhesion of plies)	-	0	-
Cl-10.8(Tensile Strength)	-	0	-
Cl-10.9, Table-3 (i)(Along (parallel to the grain direction of the face veneer))	-	0	-
Cl-10.9, Table-3 (ii)(Across (perpendicular to the grain direction of the face veneer))	-	0	-
Cl-10.10, Table-4 (i) a(Wet Bending Strength -Modulus of Elasticity (MOE),- Average)	-	0	-
Cl-10.10, Table-4 (i) b(Wet Bending Strength - Modulus of Elasticity (MOE),- Minimum individual)	-	0	-
Cl-10.11(Retention of Preservative)	-	0	-
Cl-10.12(Formaldehyde Content Test)	-	0	-
Cl-10.13(Steady-State Formaldehyde Emission Test)	-	0	-
Cl-5.1(Timber)	-	0	-
Cl-5.2(Adhesives for Bonding of Veneers)	-	0	-
Cl-6.1(Manufacture)	-	0	-
Cl-6.2(Manufacture ( Thickness of veneers))	-	0	-
Cl-6.3(Manufacture ( Physical and mechanical properties of veneers))	-	0	-
Cl-6.4, 6.7(Manufacture (Plywood for concrete shuttering))	-	0	-
Cl-6.5(Manufacture (Scarf joints))	-	0	-
Cl-6.6(Manufacture ( Preservative treatment))	-	0	-
Cl-7.1(Dimensions -length)	-	0	-
Cl-7.2(Thickness)	-	0	-
Cl-7.3(Squareness)	-	0	-
Cl-8.1, 8.2(Workmanship and finish)	-	0	-
Cl-10.3(Moisture Content)	-	0	-
Cl-10.4.1(Glue Adhesion in Dry State - Glue Shear Strength)	-	0	-
Cl-10.4.2(Glue Adhesion in Dry State - Adhesion of Plies)	-	0	-
Cl-10.5, 10.5.1(Resistance to Water Test)	-	0	-
Cl-10.5.1.1(Water Resistance Test-Glue shear strength)	-	0	-
Cl-10.5.1.2(Water Resistance Test-Adhesion of plies)	-	0	-
Cl-10.5.2(Water Resistance Test (Alternate method))	-	0	-
Cl-10.6(Water resistance test (Concrete shuttering Plywood))	-	0	-
Cl-10.7.1, Table-2(Mycological Test- Glue shear strengt)	-	0	-
Cl-10.7.2(Mycological Test- Adhesion of plies)	-	0	-
Cl-10.8(Tensile Strength)	-	0	-
Cl-10.9, Table-3 (i)(Along (parallel to the grain direction of the face veneer))	-	0	-
Cl-10.9, Table-3 (ii)(Across (perpendicular to the grain direction of the face veneer))	-	0	-
Cl-10.10, Table-4 (i) a(Wet Bending Strength -Modulus of Elasticity (MOE),- Average)	-	0	-
Cl-10.10, Table-4 (i) b(Wet Bending Strength - Modulus of Elasticity (MOE),- Minimum individual)	-	0	-
Cl-10.11(Retention of Preservative)	-	0	-
Cl-10.12(Formaldehyde Content Test)	-	0	-
Cl-10.13(Steady-State Formaldehyde Emission Test)	-	0	-
Cl-5.1(Timber)	-	-	-
Cl-5.2(Adhesives for Bonding of Veneers)	-	-	-
Cl-6.1(Manufacture)	-	-	-
Cl-6.2(Manufacture ( Thickness of veneers))	-	-	-
Cl-6.3(Manufacture ( Physical and mechanical properties of veneers))	-	-	-
Cl-6.4, 6.7(Manufacture (Plywood for concrete shuttering))	-	-	-
Cl-6.5(Manufacture (Scarf joints))	-	-	-
Cl-6.6(Manufacture ( Preservative treatment))	-	-	-
Cl-7.1(Dimensions -length)	-	-	-
Cl-7.2(Thickness)	-	-	-
Cl-7.3(Squareness)	-	-	-
Cl-8.1, 8.2(Workmanship and finish)	-	-	-
Cl-10.3(Moisture Content)	-	-	-
Cl-10.4.1(Glue Adhesion in Dry State - Glue Shear Strength)	-	-	-
Cl-10.4.2(Glue Adhesion in Dry State - Adhesion of Plies)	-	-	-
Cl-10.5, 10.5.1(Resistance to Water Test)	-	-	-
Cl-10.5.1.1(Water Resistance Test-Glue shear strength)	-	-	-
Cl-10.5.1.2(Water Resistance Test-Adhesion of plies)	-	-	-
Cl-10.5.2(Water Resistance Test (Alternate method))	-	-	-
Cl-10.6(Water resistance test (Concrete shuttering Plywood))	-	-	-
Cl-10.7.1, Table-2(Mycological Test- Glue shear strengt)	-	-	-
Cl-10.7.2(Mycological Test- Adhesion of plies)	-	-	-
Cl-10.8(Tensile Strength)	-	-	-
Cl-10.9, Table-3 (i)(Along (parallel to the grain direction of the face veneer))	-	-	-
Cl-10.9, Table-3 (ii)(Across (perpendicular to the grain direction of the face veneer))	-	-	-
Cl-10.10, Table-4 (i) a(Wet Bending Strength -Modulus of Elasticity (MOE),- Average)	-	-	-
Cl-10.10, Table-4 (i) b(Wet Bending Strength - Modulus of Elasticity (MOE),- Minimum individual)	-	-	-
Cl-10.11(Retention of Preservative)	-	-	-
Cl-10.12(Formaldehyde Content Test)	-	-	-
Cl-10.13(Steady-State Formaldehyde Emission Test)	-	-	-

01 Dec, 2027

-
Size restricted upto 2100 mm Exclusion:Steady-State Formaldehyde Emission Test

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number