BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15122 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

2341

National Institute of secondary steel technology

9135004

IS 11587 (1986)

Specification for structural weather resistant steels

ALL GRADES ALL SIZES ALL DESIGNATION

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(Tensile Test)	-	1500	-
Cl 9(Bend Test)	-	500	-
Cl 10(Impact Test)	-	1500	-
Cl 11(Flattening Test)	-	500	-
Clause 5.1, Table -1(WR-Fe 480 A, C )	-	1000	-
Clause 5.1, Table -1(WR-Fe 480 A, Si)	-	1000	-
Clause 5.1, Table -1(WR-Fe 480 A, Mn)	-	1000	-
Clause 5.1, Table -1(WR-Fe 480 A, P )	-	1000	-
Clause 5.1, Table -1(WR-Fe 480 A, S )	-	1000	-
Clause 5.1, Table -1(WR-Fe 480 B, Cr )	-	1500	-

24 Oct, 2028

-
-

2342

National Institute of secondary steel technology

9135004

IS 4368 (1967)

Specification for alloy steel billets, blooms and slabs for forging for general engineering purposes

ALL GRADES ALL SIZES ALL DESIGNATION

10500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 11(Hardness & Tensile Test)	-	2000	-
Cl 8(Diameter, Ovality & Weight)	-	1000	-
6.1, Table-1(Ladle Analysis)	-	7000	-

24 Oct, 2028

-
-

2343

National Institute of secondary steel technology

9135004

IS 11513 (2017)

Hot rolled carbon steel strip for cold rolling purposes - Specification (Second Revision)

ALL GRADES ALL SIZES ALL DESIGNATION

6500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 9(Length, Width, Thickness, Crown, Edge Camber & Difference in Thickness Across Width )	-	1500	-
6.1(Carbon %)	-	1000	-
6.1(Manganese %)	-	1000	-
6.1(Phosphorus %)	-	1000	-
6.1(Sulphur %)	-	1000	-
6.1(Silicon %)	-	1000	-

24 Oct, 2028

-
-

2344

National Institute of secondary steel technology

9135004

IS 7283 (1992)

Hot - Rolled bars for the production of bright bars and machined parts for engineering applications specification (First Revision)

ALL GRADES ALL SIZES ALL DESIGNATION

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(Decarburization)	-	1500	-
Cl 9(Inclusion)	-	1500	-
Cl 10(Hardenability)	-	2000	-
Cl 11(Size)	-	1000	-

24 Oct, 2028

-
-

2345

National Institute of secondary steel technology

9135004

IS 6240 (2008)

Hot rolled steel plate (Up To 6 Mm) sheet and strip for the manufacture of low pressure liquefiable gas cylinders (Fourth Revision)

ALL GRADES ALL SIZES ALL DESIGNATION

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 13(Length, Width & Thickness)	-	500	-
Cl 7(UTM)	-	1500	-
Cl 8(Press)	-	500	-
Cl 10(Erichsen Cupping)	-	500	-
6.1(Carbon %)	-	1000	-
6.1(Manganese %)	-	1000	-
6.1(Phosphorus %)	-	1000	-
6.1(Sulphur %)	-	1000	-
6.1(Silicon %)	-	1000	-

24 Oct, 2028

-
-

2346

National Institute of secondary steel technology

9135004

IS 5986 (2017)

Hot rolled steel sheet, plate and strip for forming and flanging purposes - Specification (Fourth Revision)

ALL GRADES ALL SIZES ALL DESIGNATION

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 15(Length, Width & Thickness)	-	500	-
Cl 8(UTM)	-	1500	-
Cl 9(Press)	-	500	-
Cl 11(Expansion Test)	-	500	-
Cl 14(Weldability)	-	1500	-
7.1(Carbon %)	-	1000	-
7.1(Manganese %)	-	1000	-
7.1(Phosphorus %)	-	1000	-
7.1(Sulphur %)	-	1000	-
7.1(Silicon %)	-	1000	-
7.1( Aluminium %)	-	1500	-

24 Oct, 2028

-
-

2347

National Institute of secondary steel technology

9135004

IS 3502 (2009)

Steel chequered plates (Third Revision)

ALL GRADES ALL SIZES ALL DESIGNATION

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 10(Length, Width, Thickness & Chequered Height)	-	500	-
Cl 8(Tensile Test)	-	1500	-
Cl 9(Press)	-	500	-

24 Oct, 2028

-
-

2348

National Institute of secondary steel technology

9135004

IS 2879 (1998)

Mild steel for metal arc welding electrodes - Specification (Third Revision)

ALL GRADES ALL SIZE ALL DESIGNATION

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8 & 9(Diameter)	-	500	-
6(Carbon %)	-	1000	-
6(Manganese %)	-	1000	-
6(Phosphorus %)	-	1000	-
6(Sulphur %)	-	1000	-
6(Silicon %)	-	1000	-
6( Aluminium %)	-	1500	-

24 Oct, 2028

-
-

2349

National Institute of secondary steel technology

9135004

IS 11169 : Part 1 (1984)

Specification for steels for cold heading/cold extrusion applications: Part 1 wrought carbon and low alloy steels

all grades all size all designation available

13500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3)( CARBON)	-	1000	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3)(SULPHUR)	-	1000	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3)(PHOSPHURS)	-	1000	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3)(MANGANESE)	-	1000	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3)(NITROGEN)	-	2000	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3)(SILICON)	-	1000	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3)( ALUMINIUM)	-	1500	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3)(Nickel)	-	1500	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3)(Chromium)	-	1500	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3)(Molybdenum)	-	1500	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3)(NIOBIUM)	-	1500	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3)(VANADIUM)	-	1500	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3)(TIN)	-	1500	-
Cl 6(Diameter & Out Of Roundness)	-	500	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3)(TITANIUM)	-	1500	-

24 Oct, 2028

-
-

2350

National Institute of secondary steel technology

9135004

IS 513 : Part 2 (2016)

Cold reduced carbon steel sheet and strip: Part 2 high tensile and multi - Phase steel (Sixth Revision)

ALL GRADES ALL SIZE ALL DESIGNATION AVAILABLE

9500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7(UTM)	-	1500	-
Cl 10(Length, Width & Thickness)	-	500	-
Cl 8.5(Workmanship)	-	500	-
6.0(NITROGEN)	-	2000	-
6.0(CARBON)	-	1000	-
6.0(SILICON)	-	1000	-
6.0(MANGANESE)	-	1000	-
6.0(SULPHUR)	-	1000	-
6.0(PHOSPHORUS)	-	1000	-

24 Oct, 2028

-
-

2351

National Institute of secondary steel technology

9135004

IS 513 : Part 1 (2016)

Cold reduced carbon steel sheet and strip: Part 1 cold forming and drawing purpose (Sixth Revision)

All Grades/ All Sizes/All Designation

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 10(Workmanship)	-	1500	-
Cl 8(UTM)	-	1500	-
Cl 11(Length, Width & Thickness)	-	500	-
7.0(CARBON)	-	1000	-
7.0(NITROGEN)	-	2000	-
7.0(SILICON)	-	1000	-
7.0(MANGANESE)	-	1000	-
7.0(PHOSPHORUS)	-	1000	-
7.0(SULPHUR)	-	1000	-
8(Mechanical and Physical Properties)	-	1500	-

24 Oct, 2028

-
-

2352

National Institute of secondary steel technology

9135004

IS 2062 (2011)

Hot rolled medium and high tensile structural steel - Specification (Seventh Revision)

All Grades/ All sizes/ All Designation

10500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 10.3(UTM)	-	1500	-
Cl 11.3(Press)	-	500	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	2000	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Carbon Equivalent- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl 12(Sudden Load Applied)	-	1500	-

24 Oct, 2028

-
-

2353

National Institute of secondary steel technology

9135004

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

All Grades/ All Sizes/ All ADesignation

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Carbon %)	-	500	-
4.1(Manganese %)	-	500	-
4.1(Silicon %)	-	500	-
4.1(Sulphur %)	-	500	-
4.1(Phosphorus %)	-	500	-
4.1( Nitrogen%)	-	2000	-
4.1(Ni)	-	1500	-
4.1(Cr)	-	1500	-
4.1(Mo)	-	1500	-
4.1( Ti)	-	1500	-
4.1(V)	-	1500	-
4.1( Nb)	-	1500	-
4.1( Aluminium %)	-	1500	-
4.1( Copper %)	-	1500	-
Cl 8.1(UTM)	-	1500	-
Cl. 9.3, Table 4(Bend Test )	-	500	-
Cl.9.4 & Cl. 9.4.1(Rebend test)	-	500	-
Cl. 5 (Cl. 5 - Mean projected area of transverse ribs (1/3 of Ar))	-	500	-
Cl. 5 (Cl.5 Mean area of ribs/unit length (Ar), )	-	500	-
Cl. 7.2 Table -2 (Nominal Mass)	-	500	-
Cl 6.1(Length, Width & Thickness)	-	500	-

24 Oct, 2028

-
-

2354

National Institute of secondary steel technology

9135004

IS 10748 (2004)

Hot - Rolled steel strip for welded tubes and pipes - Specification (Second Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 9(Press)	-	500	-
Cl 12 & 13(Length, Width & Thickness)	-	1000	-
Cl 8 & Table 3(UTM)	-	1500	-
7.1(Carbon %)	-	1000	-
7.1(Manganese %)	-	1000	-
7.1(Phosphorus %)	-	1000	-
7.1(Silicon %)	-	1000	-
7.1( Nitrogen%)	-	2000	-
7.1(Sulphur %)	-	1000	-

24 Oct, 2028

-
-

2355

National Institute of secondary steel technology

9135004

IS 15647 (2006)

Hot rolled steel narrow width strip for welded tubes and pipes

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(UTM)	-	1500	-
Cl 9(Press)	-	500	-
Cl 12(Length, Width & Thickness)	-	500	-

24 Oct, 2028

-
-

2356

National Institute of secondary steel technology

9135004

IS 2830 (2012)

Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into steel for general structural purposes - Specification (Third Revision)

7500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Carbon %)	-	1000	-
6.1(Silicon %)	-	1000	-
6.1(Manganese %)	-	1000	-
6.1(Phosphorus %)	-	1000	-
6.1(Sulphur %)	-	1000	-
6.1( Nitrogen%)	-	2000	-
Cl 11(Length, Width & Thickness)	-	500	-
Cl 9(Workmanship)	-	500	-
Cl 10.2(Workmanship)	-	500	-

24 Oct, 2028

-
-

2357

National Institute of secondary steel technology

9135004

IS 2831 (2012)

Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into structural steel (Ordinary Quality) - Specification (Fourth Revision)

8700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6.1, Table 1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	AS PER STANDARD
Cl. 6.1, Table 1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	AS PER STANDARD
Cl. 6.1, Table 1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	AS PER STANDARD
Cl. 6.1, Table 1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	AS PER STANDARD
Cl. 6.1, Table 1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	AS PER STANDARD
Cl. 6.1, Table 1(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	2000	AS PER STANDARD
Cl. 6.1, Table 1(Aluminium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	AS PER STANDARD
Cl. 6.1, Table 1(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	AS PER STANDARD
Cl. 6.1, Table 1(Niobium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	AS PER STANDARD
Cl. 6.1, Table 1(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	AS PER STANDARD
Cl. 6.1, Table 1(Titanium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	AS PER STANDARD
9( FREEDOM FROM DEFECTS)	-	500	AS PER STANDARD
11 & 12(DIMENSIONS and Tolerances)	-	500	AS PER STANDARD
10.1.a)( Macro examination IS 11371)	-	1500	AS PER STANDARD
10.1.b)( Sulphur print tests IS 12037)	-	2000	AS PER STANDARD

24 Oct, 2028

-
-

2358

National Institute of secondary steel technology

9135004

IS 1079 (2017)

Hot rolled carbon steel sheet, plate and strip - Specification (Seventh Revision)

8185 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Carbon %)	-	500	AS PER STANDARD
6.1(Manganese %)	-	500	AS PER STANDARD
6.1(Silicon %)	-	500	AS PER STANDARD
6.1(Sulphur %)	-	500	AS PER STANDARD
6.1(Phosphorus %)	-	500	AS PER STANDARD
6.1( Nitrogen%)	-	2000	AS PER STANDARD
6.1( Aluminium %)	-	1500	AS PER STANDARD
6.1( Copper %)	-	1500	AS PER STANDARD
6.1( Nb)	-	1500	AS PER STANDARD
6.1(V)	-	1500	AS PER STANDARD
6.1( Ti)	-	1500	AS PER STANDARD
Cl 8(UTM)	-	500	AS PER STANDARD
Cl 13(Length, Width & Thickness)	-	500	AS PER STANDARD
Cl 9(Press)	-	500	AS PER STANDARD

24 Oct, 2028

-
-

2359

National Institute of secondary steel technology

9135004

IS 1341 (2018)

Steel Butt Hinges - Specification (Sixth Revision)

1500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
TABLE-1 (Clause-4)( CARBON)	-	500	-
TABLE-1 (Clause-4)(MANGANESE)	-	500	-
TABLE-1 (Clause-4)(SILICON)	-	500	-
TABLE-1 (Clause-4)(SULPHUR)	-	500	-
TABLE-1 (Clause-4)(PHOSPHURS)	-	500	-
TABLE-1 (Clause-4)( ALUMINIUM)	-	1500	-
TABLE-1 (Clause-4)(Nickel)	-	1500	-
TABLE-1 (Clause-4)(Chromium)	-	1500	-
TABLE-1 (Clause-4)(Molybdenum)	-	1500	-
TABLE-1 (Clause-4)(NIOBIUM)	-	1500	-
TABLE-1 (Clause-4)(VANADIUM)	-	1500	-
TABLE-1 (Clause-4)(TITANIUM)	-	1500	-
3 Tables 2 to 9(Types)	-	1000	-

24 Oct, 2028

-
-

2360

National Institute of secondary steel technology

9135004

IS 432 : Part 1 (1982)

Mild Steel and Medium Tensile Steel Bars and Hard-Drawn Steel Wire for Concrete Reinforcement: Part 1 Mild Steel and Medium Tensile Steel Bars

2500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause -4, 4.1( CARBON)	-	500	-
Clause -4, 4.1(MANGANESE)	-	500	-
Clause -4, 4.1(SILICON)	-	500	-
Clause -4, 4.1(SULPHUR)	-	500	-
Clause -4, 4.1(PHOSPHURS)	-	500	-
Clause -4, 4.1(NITROGEN)	-	2000	-
Clause -4, 4.1( ALUMINIUM)	-	1500	-
Clause -4, 4.1(Nickel)	-	1500	-
Clause -4, 4.1(Chromium)	-	1500	-
Clause -4, 4.1(Molybdenum)	-	1500	-
Clause -4, 4.1(NIOBIUM)	-	1500	-
Clause -4, 4.2(VANADIUM)	-	1500	-
Clause -4, 4.3(TITANIUM)	-	1500	-
Cl 8(Physical Requirements)	-	1500	-
Cl 6.1(Diameter)	-	500	-
Cl 6.2(Weight)	-	500	-

24 Oct, 2028

-
-

2361

National Institute of secondary steel technology

9135004

IS 432 : Part 2 (1982)

Mild Steel and Medium Tensile Steel Bars and Hard-Drawn Steel Wire for Concrete Reinforcement: Part 2 Hard-Drawn Steel Wire

2500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 3.1.1(Sulphur)	-	500	-
Clause 3.1.1(Phosphorus)	-	500	-
Cl 7(UTM)	-	1500	-
Cl 5 & 6(Diameter)	-	500	-
Cl 8.3(Bending To Both Side At 90°, Then Straight)	-	500	-

24 Oct, 2028

-
-

2362

National Institute of secondary steel technology

9135004

IS 1038 (1983)

Specification For Steel Doors, Windows And Ventilators

5500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.(Size-Height)	-	500	-
6.1.1.2(Macro Examination)	-	1500	-
6.1.1.3(Micro Examination)	-	1500	-
4.1(Size-Width)	-	500	-
6.2(Side Hung Shutter- Thickness of hinge)	-	500	-
6.2(Side Hung Shutter- Pin diameter)	-	500	-
6.2(Side Hung Shutter-Width of hinge)	-	500	-

24 Oct, 2028

-
-

2363

National Institute of secondary steel technology

9135004

IS 7887 (1992)

Mild steel wire rod for general engineering purposes - Specification (First Revision)

4500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Carbon %)	-	600	-
6.1(Manganese %)	-	600	-
6.1(Silicon %)	-	600	-
6.1(Sulphur %)	-	600	-
6.1(Phosphorus %)	-	600	-
6.1( Aluminium %)	-	1500	-
Cl 9(Nominal Diameter & Out Of Shape)	-	500	-
6.1(Silicon %)	-	1000	-

24 Oct, 2028

-
-

2364

National Institute of secondary steel technology

9135004

IS 277 (2018)

Galvanized steel strips and sheets (Plain And Corrugated) - Specification (Seventh Revision)

All grades and sizes testing available

3000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.4(Mass of Coating: Single Spot Test)	-	2500	-
Cl 10(Galvanising Test)	-	2500	-
Cl 8.1(UTM)	-	500	-
Cl 14(Length, Width & Thickness)	-	500	-
Cl 13(Weight)	-	500	-
Cl 8.2(Press)	-	500	-
Cl. 14 & Cl. 15(Pitch of corrugation (average of 4))	-	500	-
Cl. 14 & Cl. 15(Depth of corrugation (average of 4))	-	500	-
Cl. 14 & Cl. 15 (Cl. 14 & Cl 15 (Number of Corrugation))	-	500	-
Cl. 14 & Cl. 15 (Cl. 14 & Cl 15 (Difference between Diagonal))	-	500	-
Cl. 14 & Cl. 15 (Cl. 14 & Cl. 15 (Thickness))	-	500	-
Cl. 8.1 (Cl. 8.1 (Tensile Strength))	-	500	-
Cl. 8.1 (Cl. 8.1 (Yield Stress))	-	500	-
Cl. 8.1 (Cl. 8.1 (Percentage Elongation ))	-	500	-

24 Oct, 2028

-
-

2365

National Institute of secondary steel technology

9135004

IS 210 (2009)

Grey iron castings - Specification (First Revision)

All Grades and size

4050 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Chemical Composition(chemical composition shall be as agreed to between the purchaser and the manufacturer.))	-	1000	AS PER REQUIREMENT
15, Table 3(TENSIL.E TEST- IS 1608 Part1 )	-	1500	Dumble Sample Preparation Rs.500/-
16, Table 3(Hardness Test)	-	500	AS PER STANDARD
13(SIZE OF TEST BARS-Diameter)	-	250	AS PER STANDARD
13(SIZE OF TEST BARS-Length)	-	250	AS PER STANDARD
17,Annex B(TRANSVERSE TEST)	-	500	AS PER STANDARD
10.1(FREEDOM FROM DEFECTS)	-	500	AS PER STANDARD

24 Oct, 2028

-
-

2366

Ghaziabad Testing Laboratories Pvt Ltd, Ghaziabad

8125006

IS 398 : Part 6 (2021)

Aluminium Conductors For Overhead Transmission Purposes Part 6: High conductivity aluminium alloy stranded conductors

148000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
16.2(Visual Examination)	-	1000	Up to 80 mm² = RS. 9000/- Above 80 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 120000/- Above 276 mm² to 744 mm² = RS. 148000/-
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	4000	Up to 80 mm² = RS. 9000/- Above 80 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 120000/- Above 276 mm² to 744 mm² = RS. 148000/-
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	4000	Up to 80 mm² = RS. 9000/- Above 80 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 120000/- Above 276 mm² to 744 mm² = RS. 148000/-
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	4000	Up to 80 mm² = RS. 9000/- Above 80 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 120000/- Above 276 mm² to 744 mm² = RS. 148000/-
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	4000	Up to 80 mm² = RS. 9000/- Above 80 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 120000/- Above 276 mm² to 744 mm² = RS. 148000/-
16.4, Table 2(Measurement of Diameter of Individual Aluminium Alloy Wires)	-	4000	Up to 80 mm² = RS. 9000/- Above 80 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 120000/- Above 276 mm² to 744 mm² = RS. 148000/-
16.5, Table 2(Breaking Load Test - before stranding)	-	1000	Up to 80 mm² = RS. 9000/- Above 80 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 120000/- Above 276 mm² to 744 mm² = RS. 148000/-
16.5, Table 2(Breaking Load Test - after stranding)	-	2000	Up to 80 mm² = RS. 9000/- Above 80 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 120000/- Above 276 mm² to 744 mm² = RS. 148000/-
16.6, Table 1(Elongation Test - before stranding)	-	2000	Up to 80 mm² = RS. 9000/- Above 80 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 120000/- Above 276 mm² to 744 mm² = RS. 148000/-
16.6, Table 1(Elongation Test - after stranding)	-	5000	Up to 80 mm² = RS. 9000/- Above 80 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 120000/- Above 276 mm² to 744 mm² = RS. 148000/-
16.7, Table 2(Resistivity Test)	-	13000	Up to 80 mm² = RS. 9000/- Above 80 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 120000/- Above 276 mm² to 744 mm² = RS. 148000/-
16.8(Wrapping Test)	-	5000	Up to 80 mm² = RS. 9000/- Above 80 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 120000/- Above 276 mm² to 744 mm² = RS. 148000/-
11(Stranding)	-	3000	Up to 80 mm² = RS. 9000/- Above 80 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 120000/- Above 276 mm² to 744 mm² = RS. 148000/-
8(Freedom from defects)	-	1000	Up to 80 mm² = RS. 9000/- Above 80 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 120000/- Above 276 mm² to 744 mm² = RS. 148000/-
16.9, Table 3(Ultimate Tensile Strength on Stranded Conductor)	-	25000	Up to 80 mm² = RS. 9000/- Above 80 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 120000/- Above 276 mm² to 744 mm² = RS. 148000/-
16.10, Table 3(d.c. Resistance Test on Stranded Conductor)	-	12000	Up to 80 mm² = RS. 9000/- Above 80 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 120000/- Above 276 mm² to 744 mm² = RS. 148000/-
16.11(Stress-strain Test)	-	40000	Up to 80 mm² = RS. 9000/- Above 80 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 120000/- Above 276 mm² to 744 mm² = RS. 148000/-
Cl-5(MATERIAL COMPOSITION)	-	5600	Up to 80 mm² = RS. 9000/- Above 80 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 120000/- Above 276 mm² to 744 mm² = RS. 148000/-
Cl-7, Table-1(Diameter of Wire (mm))	-	3000	Up to 80 mm² = RS. 9000/- Above 80 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 120000/- Above 276 mm² to 744 mm² = RS. 148000/-
Cl-7, Table-1(Minimum Tensile Strength of Wire)	-	5000	Up to 80 mm² = RS. 9000/- Above 80 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 120000/- Above 276 mm² to 744 mm² = RS. 148000/-
Cl-7, Table-1(Minimum Elongation on 250 mm (percent))	-	5000	Up to 80 mm² = RS. 9000/- Above 80 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 120000/- Above 276 mm² to 744 mm² = RS. 148000/-
Cl-8(Freedom from Defects)	-	1000	Up to 80 mm² = RS. 9000/- Above 80 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 120000/- Above 276 mm² to 744 mm² = RS. 148000/-
Cl-9.1.1(Wires-Nominal Sizes)	-	2500	Up to 80 mm² = RS. 9000/- Above 80 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 120000/- Above 276 mm² to 744 mm² = RS. 148000/-
Cl-9.2.1(Stranded Conductors- Size)	-	3000	Up to 80 mm² = RS. 9000/- Above 80 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 120000/- Above 276 mm² to 744 mm² = RS. 148000/-
Cl-10(Joints in Wires)	-	5000	Up to 80 mm² = RS. 9000/- Above 80 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 120000/- Above 276 mm² to 744 mm² = RS. 148000/-

30 Sep, 2027

-
Included w.e.f 18.11.2025

2367

CIPET, Chennai

6104634

IS 15328 (2003)

Unplasticized Non-Pressure Polyvinyl Chloride ( PVC -U ) Pipes for use in Underground Drainage and Sewerage Systems -

upto 315mm

27162.5 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1,6.1.1 IS 12235 (Part 1) Table 1(Dimension of Pipes: Mean outside Diameter, dem)	-	375	25% Discount on Test charges for BIS. GST not included
6.1,6.1.1 IS 12235 (Part 1) Table 1(Outside Diameter at any point, de)	-	0	-
6.1.2 IS 4985 Table 2(Wall Thickness, e )	-	0	-
6.1.3 (Length of Pipe)	-	375	25% Discount on Test charges for BIS. GST not included
6.1.4, Table 3(Dimensions of integral sockets and spigot ends :- a) Elastomeric Sealing Ringsockets and spigot ends i)Meean inside dia. Of socket, dsm)	-	375	25% Discount on Test charges for BIS. GST not included
6.1.4, Table 3(ii) Min. depth of engagement, A. )	-	0	-
6.1.4 Table 3(iii) Depth of sealing Zone C )	-	0	-
6.1.4, Table 3(v) Chamfer length, H : Approx.)	-	0	-
6.1.4.1 (wall thickness of sockets e2 min=0.9e )	-	0	-
6.1.4.1 (e3min=0.75e)	-	0	-
6.1.4, Table 4(b) Solvent Cement Joint sockets and spigot ends i) Mean inside dia. Of socket, dsm)	-	0	-
6.1.4, Table 4(ii) Length of Solvent Cement socket, l2 )	-	0	-
6.1.4, Table 4(iii) Length of spigot, l1, 100 mm Min.)	-	0	-
6.1.4, Table 4(iv) Chamfer length, H, 7 mm Approx.)	-	0	-
7(Physical characteristics )	-	375	25% Discount on Test charges for BIS. GST not included
7.1(Appearance:- )	-	0	-
7.1(Appearance:- )	-	0	-
7.2(Colour )	-	375	25% Discount on Test charges for BIS. GST not included
7.3 IS 1223S ( Part 2)(Vicat Softening Temperature When determined according to IS 1223S ( Part 2), shall not be lessthan 79°C.)	-	825	25% Discount on Test charges for BIS. GST not included
7.4 IS 1223S ( Part 5)(Longitudinal Reversion: When tested according to the methodprescribed in IS 1223S ( Part 5), shall not exceed ± 5 percent. The pipe shall not exhibit any blisters, bubbles or crackson completion of the test.)	-	1025	25% Discount on Test charges for BIS. GST not included
8(MECHANICAL CHARACTERISTICS)	-	0	-
8.1 Annex B(Resistance to External Blows at 0ºC: When tested according to the method prescribed in Annex B, the pipes hall have a true impact rate of not more than I0 percent.)	-	1325	25% Discount on Test charges for BIS. GST not included
8.2 Annex C Table 5(Ring Stiffness: When tested according to the method described in Annex C,the ring stiffness of the pipe shall be as stated in Table 5)	-	1325	25% Discount on Test charges for BIS. GST not included
8.3 IS 12235 ( Part 8/ Sec 1 ) Table 6(Resistance to internal Hydrostatic Pressure(Type Test) a) Acceptance Test:(1h at 27 0 C) )	-	638.50	25% Discount on Test charges for BIS. GST not included
8.3 IS 12235 ( Part 8/ Sec 1 ) Table 6(b) Type Test:(1000h at 60 0 C) )	-	8250	25% Discount on Test charges for BIS. GST not included
9 9.1, IS 5382(JOINTS:- a) Elastomeric Sealing Rings)	-	375	25% Discount on Test charges for BIS. GST not included
9.2 IS 14182(b) Solvent cement)	-	8262.50	25% Discount on Test charges for BIS. GST not included
10(Performance requirements)	-	0	-
10.1.1 Annex D(Internal hydrostatic pressure test for elastomeric sealing ring joints)	-	637.50	25% Discount on Test charges for BIS. GST not included
10.1.2 Annex E(Internal negative hydrostatic pressure test (internal vacuum) for elastomeric sealing ring joints)	-	750	25% Discount on Test charges for BIS. GST not included
10.2.1(Internal hydrostatic pressure test for solvent cemented Joints)	-	637.50	25% Discount on Test charges for BIS. GST not included
10.2.2(Internal negative hydrostatic pressure test (internal vacuum)for solvent cemented joints)	-	750	25% Discount on Test charges for BIS. GST not included
'7.5 (amdt.7)(Effect on Water (Type test))	-	2250	25% Discount on Test charges for BIS. GST not included
5.3(Qualitative)	-	0	-
12(Marking)	-	0	-
6.1.4, Table 3(iv) Length of spigot, l1)	-	0	-

31 Mar, 2027

-
Included w.e.f. 04.11.2025 Exclusion: 5,5.2 (Composition of the material The material shall contain a minimum of 0.3 percent of rutile grade titanium dioxide.)

2368

Samridhi Test House Pvt. Ltd.

8184706

IS 302 : Part 1 (2008)

Safety of household and similar electrical appliances: Part 1 general requirements (Sixth Revision)

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	300	-
8.1.1(Protection against live parts in all positions)	-	1000	-
8.1.2(Protection against live parts in openings)	-	1000	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	1000	-
8.1.4(Protection against live parts against protective impedance)	-	1000	-
9(Starting of motor operation test requirements and tests)	-	1000	-
10.1(Power input)	-	1000	-
10.2(Current input)	-	1000	-
11.1(General)	-	300	-
11.2(General)	-	1000	-
11.3(Heating)	-	300	-
13.1(General)	-	300	-
13.2(Leakage current at operating temperature)	-	1500	-
13.3(Electric Strength at operating temperature)	-	1500	-
14(Transient Over Voltages)	-	1500	-
15.0(General)	-	300	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	2500	-
15.2(Spillage Test)	-	1000	-
15.3(Humidity Test)	-	1500	-
16.0(General)	-	500	-
16.1(General)	-	500	-
16.2(Leakage Current (after Clause 15))	-	1000	-
16.3(Electric Strength (after clause 15 and 16.2))	-	1500	-
17(Over Load Protection of Transformers and associated circuits)	-	2000	-
18(Endurance Test requirements and tests)	-	1500	-
19(Abnormal Operation)	-	1500	-
20(Stability test)	-	1500	-
21(Mechanical Strength Test)	-	1500	-
22(Construction verification related test)	-	1500	-
23(General)	-	300	-
24(Components)	-	2000	-
25(Supply connection and external flexible cords)	-	2000	-
26(Terminals for external conductors)	-	2000	-
27(Provision for earthing)	-	2500	-
28(Screw test and connections)	-	2500	-
29(clearance, creepage distances and solid insulation)	-	1000	-
30.1(Ball pressure test)	-	1000	-
30.2(Glow Wire Test)	-	1000	-
30.2(Needle Flame Test)	-	1500	-
31(Resistance to Rusting)	-	1000	-
32(Radiation Toxicity and Similar Hazards)	-	1000	-
4(General requirement)	-	300	-
16(Leakage current and electric strength)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	2000	-
18(Endurance)	-	0	-
8.1.5(Live parts of built-in appliances)	-	1000	-
11.4(Heating appliances)	-	300	-
11.5(Motor-operated appliances)	-	300	-
11.6(Combined appliances)	-	300	-
11.7(Duration corresponding)	-	300	-
11.8(Temperature rise)	-	300	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-
4(General Requirement)	-	300	-
5(General conditions for tests)	-	300	-
6(Classification- IS 302-1)	-	300	-

-
Included w.e.f. 30.10.2025 Exclusion: 19.11.4.1 (Electrostatic discharges) 19.11.4.2 (Radiated fields) 19.11.4.3 (Fast transient bursts) 19.11.4.4 (Surge immunity test) 19.11.4.5 (Immunity to conducted discharges) 19.11.4.6 (Class 3 Voltage dips and interruptions) 19.11.4.7 (Harmonics) "(1)Cooking ranges, hobs, ovens and similar appliances, (2)Commercial Dispensing Appliances and Vending Machines, (3) spin extractors (For testing charges please refer relevant part 2 standard in LIMS)"

2369

DELHI TEST HOUSE, Azadhpur

8131406

IS 12406 (2025)

Medium Density Fibre Boards of Wood and Other Lignocellulosic Materials for General Purpose - Specification ( Third Revision )

ALL

16000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
As per Clause 7(Finish --IS 2380 (Part 2), IS 2380 (Part 3) & Visual)	-	500	Rs.- 16000/-
As per Clause 8, Table 2(Length -IS 2380 (Part 2))	-	500	Rs.- 16000/-
As per Clause 8, Table 2(Width - IS 2380 (Part 2))	-	500	Rs.- 16000/-
As per Clause 8, Table 2(Thickness - IS 2380 (Part 2))	-	500	Rs.- 16000/-
As per Clause 8, Table 2(Squareness, Max. - IS 2380 (Part 2))	-	500	Rs.- 16000/-
As per Clause 8, Table 2(Edge straightness, Max.)	-	500	Rs.- 16000/-
As per Clause 9.1 Table 3(Density -IS 2380 (Part 3))	-	500	Rs.- 16000/-
As per Clause 9.1 Table 3(Variation from mean density, --IS 2380 (Part 3))	-	500	Rs.- 16000/-
As per Clause 9.1 Table 3(Moisture Content -IS 2380 (Part 3))	-	1000	Rs.- 16000/-
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Modulus of rupture (MoR), Min.-IS 2380 (Part 4))	-	1000	Rs.- 16000/-
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Modulus of elasticity (MoE), Min. -(IS 2380 (Part 4))	-	1000	Rs.- 16000/-
As per Clause 9.1 Table 4, Table 5, Table 6, Table7(Internal bond strength, Min. - IS 2380 (Part 5))	-	1000	Rs.- 16000/-
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(24 h thickness swelling (due to general absorption) Max. - IS 2380 (Part 17))	-	1000	Rs.- 16000/-
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Screw withdrawal strength (face) , Min. -IS 2380 (Part 4))	-	1000	Rs.- 16000/-
As per Clause 9.1 Table 4, Table 5, table 6, Table 7(Screw withdrawal strength (edge) , Min. -IS 2380 (Part 4))	-	1000	Rs.- 16000/-
As per Clause 9.1 , Table 5, Table 6, Table 7(Moisture Resistance : Option 1 : Cyclic test (1. )Internal bond strength Min. -IS 2380 (Part 5) see note 1)	-	1000	Rs.- 16000/-
As per Clause 9.1 , Table 5, Table 6, Table 7(Moisture Resistance : Option 2 : Boil test (1.) Internal bond strength , Min.- IS 2380 (Part 5) see note 2)	-	1000	Rs.- 16000/-
As per Clause 9.1 , Table 9(Formaldehyde content Fc, mg/100 g for oven dry board -IS 13745)	-	3000	Rs.- 16000/-

17 Jun, 2027

-
"1 As per Clause 9.1 , Table 9 (Steady-state formaldehyde emission, Fc, mg/m3 (optional test)) STEADY-STATE FORMALDEHYDE EMISSION FACILITY IS NOT AVAILABLE 2 Cl-5.1 (Wood and Any Other Lignocellulosic Material) - IT IS FOR MANUFACTURER 3 Cl-5.2 (Adhesive) - IT IS FOR MANUFACTURER 4 Cl-5.3 (Sizing Material) - IT IS FOR MANUFACTURER 5 Cl-5.4 (Preservative Treatment) - IT IS FOR MANUFACTURER 6 Cl-6 (MANUFACTURE) - IT IS FOR MANUFACTURER"

2370

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 280 (2006)

Mild steel wire for general engineering purposes (Fourth Revision)

7500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	0	-
Cl 9(Tensile Test On UTM)	-	1000	-
Cl 11(Workmanship)	-	0	-
Cl 13(Workmanship)	-	0	-
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	0	-
Cl 9(Tensile Test On UTM)	-	0	-
Cl 11(Workmanship)	-	0	-
Cl 13(Workmanship)	-	0	-
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	0	-
Cl 9(Tensile Test On UTM)	-	0	-
Cl 11(Workmanship)	-	0	-
Cl 13(Workmanship)	-	0	-
6 AND AS PER IS 7887(PHOSPHORUS)	-	700	-
6 AND AS PER IS 7887(SULPHUR)	-	700	-
6 AND AS PER IS 7887(MANGANESE)	-	700	-
6 AND AS PER IS 7887(SILICON)	-	700	-
6 AND AS PER IS 7887(CARBON)	-	700	-
7 & 8(Ovality)	-	0	-
7 & 8(Diameter)	-	0	-
9.2(Wrapping Test)	-	1000	-
9.3(Bend test)	-	1000	-
10(Finish)	-	0	-
11(Coating test)	-	600	-
13(Freedom from defects)	-	200	-
Cl 13(Workmanship)	-	0	-
Cl 11(Workmanship)	-	0	-
Cl 9(Tensile Test On UTM)	-	0	-
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	0	-
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	0	-
Cl 9(Tensile Test On UTM)	-	0	-
Cl 11(Workmanship)	-	0	-
Cl 13(Workmanship)	-	0	-
14(Packing)	-	0	-
15(Marking)	-	200	-
CL 08(AVG Outer dia (08))	-	0	-
CL 08(MAX OVALITY (08))	-	0	-
Clause 6 and Note 3 of IS 7887(Any Instrumental Method/Chemical Method)	-	0	-
Clause 6 and Note 3 of IS 7887(Copper)	-	0	-
Clause 6 and Note 3 of IS 7887(Copper)	-	0	-
6 AND AS PER IS 7887(MICRO ALLOY)	-	0	-
6 AND AS PER IS 7887(ALUMINIUM)	-	0	-

-
included w.e.f 05-01-2026

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number