| 2401 |
Atckon Laboratories LLP, Bahadurgarh
| 8186436
| IS 14912 (2001) |
Door closers, concealed type (Hydraulically Regulated) - Specification |
All Types |
17000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5(NOMINAL SIZES) |
- |
500 |
|
- |
| 6 table 2(material) |
- |
1000 |
|
- |
| 7.2(CLOSING TIME) |
- |
1000 |
|
- |
| 8.1(FINISH) |
- |
2500 |
|
- |
| 8.2.2(FINISH) |
- |
2500 |
|
- |
| 13.3.1 table 3(For Construction, Finish, Dimensions, Interchangeability of Parts and Performance Tests) |
- |
2500 |
|
- |
| 13.3.2(Endurance Test) |
- |
12000 |
|
- |
| Clause 5(Nominal size) |
- |
500 |
|
- |
| Clause 6
Table 2(i)(Non-Porous body) |
- |
1000 |
|
- |
| Clause 6
Table 2(ii)(Piston) |
- |
1000 |
|
- |
| Clause 6
Table 2(iii)(End plug) |
- |
1000 |
|
- |
| Clause 6
Table 2(iv)(Main spring
inner spring) |
- |
1000 |
|
- |
| Clause 6
Table 2(v)(Regulating valve
packing) |
- |
1000 |
|
- |
| Clause 6
Table 2(vi)(Regulating valve) |
- |
1000 |
|
- |
| Clause 6
Table 2(vii)(All weather resistant
homogenous high
viscosity hydraulic fluid) |
- |
1000 |
|
- |
| Clause 6
Table 2(viii)(Top and bottom
bearing bush) |
- |
1000 |
|
- |
| Clause 6
Table 2(ix)(Pinion) |
- |
1000 |
|
- |
| Clause 6
Table 2(x)(Top guide nut) |
- |
1000 |
|
- |
| Clause 6
Table 2(xi)(Shaft seal) |
- |
1000 |
|
- |
| Clause 6
Table 2(xii)(Seal retaining ring) |
- |
1000 |
|
- |
| Clause 6
Table 2(xiii)(Aluminium sheet cover
) |
- |
1000 |
|
- |
| Clause 6
Table 2(xiv)(Holding plate) |
- |
1000 |
|
- |
| Clause 6
Table 2(xv)(Main arm) |
- |
1000 |
|
- |
| Clause 6
Table 2(xvi)(Nvlon runner) |
- |
1000 |
|
- |
| Clause 7(As per Table 1) |
- |
1000 |
|
- |
| Clause 8(Finish ) |
- |
2500 |
|
- |
| Clause 9(Test ) |
- |
12000 |
|
- |
| Clause 10(Marking) |
- |
1000 |
|
- |
| Clause 11(Packing) |
- |
1000 |
|
- |
|
- |
-
Included w.e.f. 29.10.2025 |
| 2402 |
IndianOil Corporation Limited (IOCL) Rewari Terminal Laboratory
| 8189914
| IS 15607 (2022) |
Biodiesel B-100 - Fatty Acid Methyl Esters FAME Specification Second Revision |
- |
17490 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.4(CFPP - ASTM D6371 / EN 16329 / IS 1448 P:110 b) Winter) |
- |
1810 |
|
- |
| 4.4(CFPP - ASTM D6371 / EN 16329 / IS 1448 P:110 a) Summer) |
- |
1810 |
|
- |
| 4.4(Copper corrosion - IS 1448 P:15 / ISO 2160) |
- |
1130 |
|
- |
| 4.4(Water content - IS 1448 P:40 / ISO 3733/ ISO 12937) |
- |
3960 |
|
- |
| 4.4(Sulphur - ISO 20846 / ASTM D5453) |
- |
4710 |
|
- |
| 4.4(Flash point (PMCC) - IS 1448 P:21 ) |
- |
1900 |
|
- |
| 4.4(Kinematic viscosity at 40°C - IS 1448 P:25/ ISO3104) |
- |
2270 |
|
- |
| 4.4(Density at 15 oC - IS 1448 P:16/ ISO 3675/ ISO 12185/ ASTM D4052) |
- |
1130 |
|
- |
| 4.4-Table 1-i)(Appearance, visual) |
- |
200 |
|
- |
| 4.4-Table 1-xxvi)(Cold filter plugging point (CFPP), °C Max
a) summer 18 – Part 110
b) winter3)) |
- |
1810 |
|
- |
| 4.4-Table 1-xi)(Copper strip corrosion, 3 h at 50 °C, Max) |
- |
1130 |
|
- |
| 4.4-Table 1-ix)(Water content mg/kg, Max) |
- |
3960 |
|
- |
| 4.4-Table 1-vi)(Total Sulphur, mg/kg, Max) |
- |
4710 |
|
- |
| 4.4-Table 1-v)(Flash point (PMCC)1) °C, Min) |
- |
1900 |
|
- |
| 4.4-Table 1-iv)(Kinematic viscosity at 40 °C, cSt) |
- |
2270 |
|
- |
| 4.4-Table 1-iii)(Density at 15 °C, kg/m3) |
- |
200 |
|
- |
| 4.4-Table 1-ii)(Colour, visual) |
- |
200 |
|
- |
|
10 Nov, 2028 |
-
Excluding: 4.1 (General) 4.2 (Additives) 4.3 (The materials shall be free from grit) 4.4-Table 1-vii) (Carbon residue (MCR) 2) percent by mass, Max) 4.4-Table 1-viii) (Sulfated ash, percent by mass, Max) 4.4-Table 1-x) (Total contamination, mg/kg, Max 4.4-Table 1-xii) (Cetane No., Min) 4.4-Table 1-xiii) (Acid value, mg KOH/g, Max) 4.4-Table 1-xiv) (Methanol, percent by mass, Max) 4.4-Table 1-xv) (Ester content, percent by mass, Min 4.4-Table 1-xvi) (Monoglycerides content, percent by mass, Max) 4.4-Table 1-xvii) (Diglyceride content, percent by mass, Max) 4.4-Table 1-xviii) (Triglyceride content, percent by mass, Max) 4.4-Table 1-xix) (Free Glycerol percent by mass, Max) 4.4-Table 1-xx) (Total Glycerol percent by mass, Max) 4.4-Table 1-xxi) (Phosphorous mg/kg, Max) 4.4-Table 1-xxii) (Sodium + Potassium mg/kg, Max) 4.4-Table 1-xxiii) (Calcium + Magnesium mg/kg, Max) 4.4-Table 1-xxiv) (Iodine value, gm iodine/100 gm, Max) 4.4-Table 1-xxv) (Oxidation stability, at 110 °C, Min hrs. Accelerated) 4.4-Table 1-xxvii) (Linolenic acid methyl ester, percent m/m, Max) 4.4-Table 1-xxviii) (Polyunsaturated (>_ 4 double bonds) methyl ester percent m/m, Max) 5.1 (Packing) 5.2 (Marking) |
| 2403 |
IndianOil Corporation Limited (IOCL) Rewari Terminal Laboratory
| 8189914
| IS 1460 (2025) |
Automotive Diesel Fuel - Specification (seventh revision) |
- |
19660 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl-3.1.4 , 3.2, Table-1 (i)(Appearance) |
- |
200 |
|
- |
| Cl-3.1.4 , 3.2, Table-1 (vi)(Cetane index, Min) |
- |
3770 |
|
- |
| Cl-3.1.4 , 3.2, Table-1 (vii) (a)(Pour point3, °C, Max: Winter) |
- |
1900 |
|
- |
| Cl-3.1.4 , 3.2, Table-1 (vii) (b)(Pour point3, °C, Max: Summer) |
- |
1900 |
|
- |
| Cl-3.1.4 , 3.2, Table-1 (viii)(Copper strip corrosion for 3 h at 50 °C, Max) |
- |
1130 |
|
- |
| Cl-3.1.4 , 3.2, Table-1 (ix)(Distillation, 95 percent v/v recovery, °C, Max) |
- |
2650 |
|
- |
| Cl-3.1.4 , 3.2, Table-1 (x)(Flash point, Abel4, °C, Min) |
- |
1900 |
|
- |
| Cl-3.1.4 , 3.2, Table-1 (xi)(Kinematic viscosity, mm2/s, at 40 °C) |
- |
2270 |
|
- |
| Cl-3.1.4 , 3.2, Table-1 (xiii)(Density at 15 °C, kg/m3) |
- |
1130 |
|
- |
| Cl-3.1.4 , 3.2, Table-1 (xiv)(Total sulphur, mg/kg, Max) |
- |
4710 |
|
- |
| Cl-3.1.4 , 3.2, Table-1 (xv)(Water content, mg/kg, Max) |
- |
3960 |
|
- |
|
10 Nov, 2028 |
-
Excluding: Cl-4.1 (General- Requirements) Cl-4.1.2 (Antioxidants) Cl-4.1.3 (Metal Deactivators)
Cl-4.1.5 (Motor gasoline multifunctional additives (MFA),) Cl-4.2.1 (Organic Oxygenates- Permitted Components) Cl-4.3 (Other Requirements) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (v) (a) (Research octane number (RON), Min: MG 91) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (v) (b) (Research octane number (RON), Min: MG 95) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (vi) (a) (Motor octane number (MON),Min: MG 91) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (vi) (b) (Motor octane number (MON),Min: MG 95) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (ix) (Lead content (as Pb ), g/l, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (x) (a) (Reid vapour pressure (RVP) at 38°C, kPa , Max: MG(without ethanol)) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (x) (b) (Reid vapour pressure (RVP) at 38°C, kPa , Max: Ethanol blended MG) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xi) (a) (Vapour lock index (VLI),Max :- MG (without ethanol)) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xi) (b) (Vapour lock index (VLI),Max :- MG (with 5 percent v/v ethanol)) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xi) (c) (Vapour lock index (VLI),Max :- E10) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xii) (Benzene content, percent by volume, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xiv) (a) (Water tolerance of motor gasoline-alcohol blends, temperature for phase separation:- Winter, °C, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xiv) (b) (Water tolerance of motor gasoline-alcohol blends, temperature for phase separation:- Other months, °C, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xv) (Engine intake system cleanliness) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xvi) (a) (Olefin content, percent by volume, Max: MG 91 Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xvi) (b) (Olefin content, percent by volume, Max :MG 95) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xvii) (Oxidation stability, minutes, Min) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xviii) (Aromatics content, percent by volume, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (ixi) (Oxygen content, percent by mass, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (XXI) (Oxygenates percent by volume, Max:- Ethers containing 5 or more ‘C’ atoms per molecules such as MTBE, ETBE or TAME) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (XXI) (Oxygenates percent by volume, Max) Cl-5.2 (Marketing) |
| 2404 |
Indian oil corporation ltd (IOCL) Agra Terminal laboratory
| 9195114
| IS 2796 (2017) |
Motor gasoline - Specification (Sixth Revision) |
MS and its variants ,EBMS |
14940 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl-4.1.4, 4.2.2 & 4.4, Table-1 (i)(Appearance) |
- |
200 |
|
OK |
| Cl-4.1.4, 4.2.2 & 4.4, Table-1 (ii), b)("Colour:
MG 95") |
- |
200 |
|
OK |
| Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xiii)(Copper strip corrosion, for 3 h at 50°C, Max) |
- |
1130 |
|
OK |
| Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iii)(Density at 15°C, kg/m³) |
- |
1130 |
|
OK |
| Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (d)(Final boiling point, °C, Max) |
- |
2650 |
|
OK |
| Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (b)(percent evaporated at 100°C (E 100 °C), percent v/v) |
- |
2650 |
|
OK |
| Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (c)(percent evaporated at 150°C (E 150 °C), percent v/v, Min) |
- |
2650 |
|
OK |
| Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (a)(percent evaporated at 70°C (E 70°C), percent v/v: E10) |
- |
2650 |
|
OK |
| Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (e)(Residue, percent by volume, Max) |
- |
2650 |
|
OK |
| Cl-4.1.4, 4.2.2 & 4.4, Table-1 (vii)(Gum content (Solvent washed), g/m3, Max) |
- |
2070 |
|
OK |
| Cl-4.1.4, 4.2.2 & 4.4, Table-1 (viii)(Total sulphur, mg/kg, Max) |
- |
4710 |
|
OK |
| Cl-4.1.4, 4.2.2 & 4.4, Table-1 (ii), a)("Colour:
MG 91") |
- |
200 |
|
OK |
| Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (a)(percent evaporated at 70°C (E 70°C), percent v/v: Motor gasoline) |
- |
2650 |
|
OK |
|
26 Dec, 2028 |
-
Cl-4.1 (General- Requirements)
Cl-4.1.2 (Antioxidants)
Cl-4.1.3 (Metal Deactivators)
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (ix) (Lead content (as Pb ), g/l, Max)
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (ixi) (Oxygen content, percent by mass, Max)
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (v) (a) (Research octane number (RON), Min: MG 91)
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (v) (b) (Research octane number (RON), Min: MG 95)
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (vi) (a) (Motor octane number (MON),Min: MG 91)
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (vi) (b) (Motor octane number (MON),Min: MG 95)
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (x) (a) (Reid vapour pressure (RVP) at 38°C, kPa , Max: MG(without ethanol))
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (x) (b) (Reid vapour pressure (RVP) at 38°C, kPa , Max: Ethanol blended MG)
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xi) (a) (Vapour lock index (VLI),Max :- MG (without ethanol))
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xi) (b) (Vapour lock index (VLI),Max :- MG (with 5 percent v/v ethanol))
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xi) (c) (Vapour lock index (VLI),Max :- E10)
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xii) (Benzene content, percent by volume, Max)
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xiv) (a) (Water tolerance of motor gasoline-alcohol blends, temperature for phase separation:- Winter, °C, Max)
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xiv) (b) (Water tolerance of motor gasoline-alcohol blends, temperature for phase separation:- Other months, °C, Max)
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xv) (Engine intake system cleanliness)
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xvi) (a) (Olefin content, percent by volume, Max: MG 91)
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xvi) (b) (Olefin content, percent by volume, Max :MG 95)
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xvii) (Oxidation stability, minutes, Min)
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xviii) (Aromatics content, percent by volume, Max)
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xx) (Ethanol content, percent by volume: a) Motor gasoline)
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xx) (Ethanol content, percent by volume: a):- E10)
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (XXI) (Oxygenates percent by volume, Max)
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (XXI) (Oxygenates percent by volume, Max:- Ethers containing 5 or more ‘C’ atoms per molecules such as MTBE, ETBE or TAME)
Cl-4.1.5 (Motor gasoline multifunctional additives (MFA),)
Cl-4.2.1 (Organic Oxygenates- Permitted Components)
Cl-4.3 (Other Requirements)
Cl-5.2 (Markeing) |
| 2405 |
Indian oil corporation ltd (IOCL) Agra Terminal laboratory
| 9195114
| IS 1459 (2018) |
Kerosene - Specification (Fourth Revision) |
- |
13050 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.2-Table 1-i)(Appearance) |
- |
200 |
|
OK |
| 4.2-Table 1-iv)(Colour
a)Saybolt (in cas of undyedKerosene)3), Min
b)Visual (in case of dyed Kerosene)) |
- |
200 |
|
OK |
| 4.2-Table 1-v)(Copper strip corrosion for 3 h at 50°C) |
- |
1130 |
|
OK |
| 4.2-Table 1-vi)(Density at 15°C, kg/m3) |
- |
1130 |
|
OK |
| 4.2-Table 1-vii)(Distillation
a)Percent recovered below200°C, percent (v/v), Min
b)Final boiling point, °C, Max
) |
- |
2650 |
|
OK |
| 4.2-Table 1-viii)(Flash point ( Abel), °C, Min) |
- |
1900 |
|
OK |
| 4.2-Table 1-ix)(Smoke Point4), mm, Min) |
- |
1130 |
|
OK |
| 4.2-Table 1-x)(Total Sulphur Content, percent, m/m, Max) |
- |
4710 |
|
OK |
|
26 Dec, 2028 |
-
4.2-Table 1-ii) (Acidity, inorganic)
4.2-Table 1-iii) (Burning quality2) a)Char Value, mg/kg of oil consumed, Max b)Bloom on glass Chimney)
5.1 (Packing)
5.2 (Marking) |
| 2406 |
Standard Testing Laboratory Private Limited
| 8170106
| IS 17875 (2022) |
Stainless Steel seamless pipes and tubes for general service |
All |
17000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 8.0 (Table No.- 1)(Chemical Composition,% - IS 228) |
- |
17000 |
|
- |
| 10.1 (Table No.- 4)(Tensile Test,Mpa - IS 1608) |
- |
17000 |
|
- |
| 11(Transverse Tension Test,%) |
- |
17000 |
|
- |
| 12 (Table No.- 5)(Hardness Test,HRC,HRB&BHN- IS 1500 (Part 1) or IS 1586 (Part 1)) |
- |
17000 |
|
- |
| 13 (Table No.- 7)(Flaring Test) |
- |
17000 |
|
- |
| 14(Flattaning Test-IS 2328) |
- |
17000 |
|
- |
| 15.1 (Table No.- 8)(Grain Size,No.-IS 4748) |
- |
17000 |
|
- |
| 17(Leak Tighteness Test) |
- |
17000 |
|
- |
| 18("Corrosion Test-IS 10461
(Part 1) or IS 10461 (Part 2)") |
- |
17000 |
|
- |
| 19(Eddy current test & Air under water) |
- |
0 |
|
- |
| 21(Workmanship, Finish and Appearance) |
- |
17000 |
|
- |
| 22(Repair by Welding or Grinding) |
- |
17000 |
|
- |
| 23 (Table No.- 9,10&11)(Dimensions and Tolerances,mm) |
- |
17000 |
|
- |
| "Clause 8.1 and 8.2 - Table 1"(Carbon) |
- |
17000 |
|
- |
| "Clause 8.1 and 8.2 - Table 1"(Silicon) |
- |
17000 |
|
- |
| "Clause 8.1 and 8.2 - Table 1"(Mangnese) |
- |
17000 |
|
- |
| "Clause 8.1 and 8.2 - Table 1"(Nickel) |
- |
17000 |
|
- |
| "Clause 8.1 and 8.2 - Table 1"(Chromium) |
- |
17000 |
|
- |
| "Clause 8.1 and 8.2 - Table 1"(Molybdenum) |
- |
17000 |
|
- |
| "Clause 8.1 and 8.2 - Table 1"(Sulphur) |
- |
17000 |
|
- |
| "Clause 8.1 and 8.2 - Table 1"(Phosphorous) |
- |
17000 |
|
- |
| "Clause 8.1 and 8.2 - Table 1"(Nitrogen) |
- |
17000 |
|
- |
| "Clause 8.1 and 8.2 - Table 1"(Copper) |
- |
17000 |
|
- |
| "Clause 8.1 and 8.2 - Table 1"(Aluminium) |
- |
17000 |
|
- |
| "Clause 8.1 and 8.2 - Table 1"(Titanium) |
- |
17000 |
|
- |
| "Clause 8.1 and 8.2 - Table 1"(Niobium) |
- |
17000 |
|
- |
| "Clause 18 IS 10461(Part 1)"(Corrosion Test) |
- |
17000 |
|
- |
| Clause 10.1 - Table 4(Tensile Strength) |
- |
17000 |
|
- |
| Clause 10.1 - Table 4(Percent Elongation) |
- |
17000 |
|
- |
| Clause 11(Transverse Tension Test) |
- |
17000 |
|
- |
| Clause 12(Hardness Test) |
- |
17000 |
|
- |
| Clause 13(Flaring Test) |
- |
17000 |
|
- |
| Clause 14(Flattening Test) |
- |
17000 |
|
- |
| Clause 15(Grain Size) |
- |
17000 |
|
- |
| Clause 17(Leak Tightness Test) |
- |
17000 |
|
- |
| "Clause 18 IS 10461(Part 2)"(Corrosion Test) |
- |
17000 |
|
- |
| Clause 21(Workmanship, Finish & Appearance) |
- |
17000 |
|
- |
| Clause 23 Annexure A, Table 9 Table 10(Dimensions & Tolerances) |
- |
17000 |
|
- |
| 10.2(Hardness test IS 1500 (part-1):2019) |
- |
17000 |
|
- |
| 12.2(Flaring test IS 17878:2022) |
- |
17000 |
|
- |
| 16(Sampling) |
- |
17000 |
|
- |
| 24(Marking) |
- |
17000 |
|
- |
| "Clause 8.1 and 8.2 - Table 1"(W) |
- |
17000 |
|
- |
| "Clause 8.1 and 8.2 - Table 1"(Ta) |
- |
0 |
|
- |
| "Clause 8.1 and 8.2 - Table 2"(V) |
- |
17000 |
|
- |
|
10 Apr, 2028 |
-
Included w.e.f 28.10.2025
Exclusion: Cl 19 (Eddy current test & Air under water) , "Clause 8.1 and 8.2 - Table 1" (Ta) |
| 2407 |
Indian oil corporation ltd (IOCL) Agra Terminal laboratory
| 9195114
| IS 15464 (2022) |
ANHYDROUS ETHANOL FOR USE AS BLENDING COMPONENT IN MOTOR GASOLINE SPECIFICATION First Revision |
- |
8490 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.4-Table 1-viii)(Acidity (as CH3 COOH), mg/kg, Max.) |
- |
1140 |
|
OK |
| 4.4-Table 1-i)(Appearance) |
- |
200 |
|
OK |
| 4.4-Table 1-ix)(Alkalinity, mg/kg, Max.) |
- |
400 |
|
OK |
| 4.4-Table 1-x)(Aldehyde (as CH3 CHO) content, mg/l, Max) |
- |
1820 |
|
OK |
| 4.4-Table 1-iii)(Ethanol, percent, v/v, Min1)). (excluding denaturant)) |
- |
1340 |
|
ok |
| 4.4-Table 1-xix)(Miscibility with water) |
- |
380 |
|
OK |
| 4.4-Table 1-ii)(Relative density at 15.6/15.6 °C, Max) |
- |
1130 |
|
OK |
| 4.3(Acidity) |
- |
1140 |
|
ok |
| 4.4-Table 1-iv)(Ethanol, percent, v/v, Min1). (excluding denaturant)) |
- |
1340 |
|
ok |
|
26 Dec, 2028 |
-
4.1 (Description)
4.2 (Denaturant)
4.4-Table 1 iv (Methanol)
4.4-Table 1-v) (Higher saturated alcohols (C3-C5), percent, v/v, Max)
4.4-Table 1-vi) (Boiling point, °C, Min.)
4.4-Table 1-vi) (Boiling point, °C, Min.)
4.4-Table 1-vii) (Residue on evaporation, percent by mass, Max.)
4.4-Table 1-xi) (Electrical conductivity, µS/m, Max)
4.4-Table 1-xii) (Copper, mg/kg, Max.)
4.4-Table 1-xiii) (pHe)
4.4-Table 1-xiv) (Inorganic chloride, mg/kg, Max.)
4.4-Table 1-xv) (Sulfur content, mg/kg, Max.)
4.4-Table 1-xvi) (Sulphate content, mg/kg Max.)
4.4-Table 1-xvii) (Water content, percent v/v, Max.)
4.4-Table 1-xviii) (Hydrocarbons, percent v/v)
5.1 (Packing)
5.2 (Marking)
7.1 (Tests shall be conducted) |
| 2408 |
IndianOil Corporation Limited (IOCL) Rewari Terminal Laboratory
| 8189914
| IS 2796 (2017) |
Motor gasoline - Specification (Sixth Revision) |
- |
12780 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl-4.1.4, 4.2.2 & 4.4, Table-1 (i)(Appearance) |
- |
200 |
|
- |
| Cl-4.1.4, 4.2.2 & 4.4, Table-1 (ii), a)("Colour:
MG 91") |
- |
200 |
|
- |
| Cl-4.1.4, 4.2.2 & 4.4, Table-1 (ii), b)("Colour:
MG 95") |
- |
200 |
|
- |
| Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iii)(Density at 15°C, kg/m³) |
- |
1130 |
|
- |
| Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (a)(percent evaporated at 70°C (E 70°C), percent v/v: Motor gasoline) |
- |
2650 |
|
- |
| Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (a)(percent evaporated at 70°C (E 70°C), percent v/v: E10) |
- |
2650 |
|
- |
| Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (b)(percent evaporated at 100°C (E 100 °C), percent v/v) |
- |
2650 |
|
- |
| Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (c)(percent evaporated at 150°C (E 150 °C), percent v/v, Min) |
- |
2650 |
|
- |
| Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (d)(Final boiling point, °C, Max) |
- |
2650 |
|
- |
| Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (e)(Residue, percent by volume, Max) |
- |
2650 |
|
- |
| Cl-4.1.4, 4.2.2 & 4.4, Table-1 (vii)(Gum content (Solvent washed), g/m3, Max) |
- |
2070 |
|
- |
| Cl-4.1.4, 4.2.2 & 4.4, Table-1 (viii)(Total sulphur, mg/kg, Max) |
- |
4710 |
|
- |
| Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xiii)(Copper strip corrosion, for 3 h at 50°C, Max) |
- |
1130 |
|
- |
| Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xx)(Ethanol content, percent by volume: a) Motor gasoline) |
- |
690 |
|
- |
| Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xx)(Ethanol content, percent by volume: a):- E10) |
- |
690 |
|
- |
|
10 Nov, 2028 |
-
Excluding: Cl-4.1 (General- Requirements) Cl-4.1.2 (Antioxidants) Cl-4.1.3 (Metal Deactivators)
Cl-4.1.5 (Motor gasoline multifunctional additives (MFA),) Cl-4.2.1 (Organic Oxygenates- Permitted Components) Cl-4.3 (Other Requirements) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (v) (a) (Research octane number (RON), Min: MG 91) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (v) (b) (Research octane number (RON), Min: MG 95) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (vi) (a) (Motor octane number (MON),Min: MG 91) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (vi) (b) (Motor octane number (MON),Min: MG 95) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (ix) (Lead content (as Pb ), g/l, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (x) (a) (Reid vapour pressure (RVP) at 38°C, kPa , Max: MG(without ethanol)) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (x) (b) (Reid vapour pressure (RVP) at 38°C, kPa , Max: Ethanol blended MG) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xi) (a) (Vapour lock index (VLI),Max :- MG (without ethanol)) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xi) (b) (Vapour lock index (VLI),Max :- MG (with 5 percent v/v ethanol)) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xi) (c) (Vapour lock index (VLI),Max :- E10) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xii) (Benzene content, percent by volume, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xiv) (a) (Water tolerance of motor gasoline-alcohol blends, temperature for phase separation:- Winter, °C, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xiv) (b) (Water tolerance of motor gasoline-alcohol blends, temperature for phase separation:- Other months, °C, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xv) (Engine intake system cleanliness) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xvi) (a) (Olefin content, percent by volume, Max: MG 91 Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xvi) (b) (Olefin content, percent by volume, Max :MG 95) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xvii) (Oxidation stability, minutes, Min) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xviii) (Aromatics content, percent by volume, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (ixi) (Oxygen content, percent by mass, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (XXI) (Oxygenates percent by volume, Max:- Ethers containing 5 or more ‘C’ atoms per molecules such as MTBE, ETBE or TAME) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (XXI) (Oxygenates percent by volume, Max) Cl-5.2 (Marketing) |
| 2409 |
ENVIRONMENTAL LABORATORY (UNIT OF MINERAL ENGINEERING SERVICES LLP), BENGALURU
| 6130616
| IS 15410 (2025) |
PLASTIC BOTTLES/CONTAINERS FOR PACKAGING OF NATURAL MINERAL WATER AND PACKAGED DRINKING WATER - SPECIFICATION (first revision) |
- |
10000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Clause 4.1.1(Materials for Primary Packaging (Container)) |
- |
500 |
|
This charge is only for Material parameter in indian rupees |
| Clause 4.2(Design, Shape and Dimensions) |
- |
50 |
|
This charge is only for Design, shpe & Dimension parameter in indian rupees |
| Clause 4.3("Manufacture, Workmanship, Finish and
Appearance") |
- |
50 |
|
This charge is only for Manufacture, workmanship,finish & Appearance parameter in indian rupees |
| Clause 4.4(Capacity (Nominal)) |
- |
300 |
|
This charge is only for Capacity parameter in indian rupees |
| Clause 4.4(Capacity (Brimfull)) |
- |
300 |
|
This charge is only for Capacity parameter in indian rupees |
| Clause 4.5(Wall Thickness Top) |
- |
100 |
|
This charge is only for Wall Thichness-Top parameter in indian rupees |
| Clause 4.5(Wall Thickness Middle) |
- |
100 |
|
This charge is only for Wall Thickness-Middle parameter in indian rupees |
| Clause 4.5(Wall Thickness Bottom) |
- |
100 |
|
This charge is only for Wall thichness-Bottom parameter in indian rupees |
| Clause 4.6.1.1(Colour-Transparency) |
- |
500 |
|
This charge is only for Transparency parameter in indian rupees |
| Clause 4.6.2(Leakage Test (Closure Leakage) cls. 6.1 of IS 2798) |
- |
125 |
|
This charge is only for Leakage Test parameter in indian rupees |
| Clause 4.6.2(Leakage Test (Vibration Leakage) cls. 6.2 of IS 2798) |
- |
125 |
|
This charge is only for Leakage Test parameter in indian rupees |
| Clause 4.6.3.1(Drop Impact test) |
- |
200 |
|
This charge is only for Drop Impact Test parameter in indian rupees |
| Clause 4.6.3.2(Stack Load test) |
- |
100 |
|
This charge is only for Stack Load Test parameter in indian rupees |
| Clause 4.6.4.1(Overall Migration Container) |
- |
1000 |
|
This charge is only for Overall Migration parameter in indian rupees |
| Clause 4.6.4.1(Overall Migration Closure) |
- |
1000 |
|
This charge is only for Overall Migration parameter in indian rupees |
| Clause 4.6.4.3(Colour migration Container) |
- |
1000 |
|
This charge is only forColour Migration parameter in indian rupees |
| Clause 4.6.4.3(Colour migration Closure) |
- |
1000 |
|
This charge is only for colour Migration parameter in indian rupees |
| Clause 4.6.5(Water Potability Test (Taste)) |
- |
1200 |
|
This charge is only for Water Potability parameter in indian rupees |
| Clause 4.6.5(Water Potability Test (odour)) |
- |
1200 |
|
This charge is only forWater Potability parameter in indian rupees |
| Clause 4.6.4.2(Specific Migration Container Barium) |
- |
125 |
|
This charge is only for Barium parameter in indian rupees |
| Clause 4.6.4.2(Specific Migration Container Cobalt) |
- |
125 |
|
This charge is only for Cobalt parameter in indian rupees |
| Clause 4.6.4.2(Specific Migration Container Copper) |
- |
125 |
|
This charge is only for Copper parameter in indian rupees |
| Clause 4.6.4.2(Specific Migration Container Iron) |
- |
125 |
|
This charge is only for Iron parameter in indian rupees |
| Clause 4.6.4.2(Specific Migration Container Lithium) |
- |
125 |
|
This charge is only for Lithium parameter in indian rupees |
| Clause 4.6.4.2(Specific Migration Container Manganese) |
- |
125 |
|
This charge is only for Manganese parameter in indian rupees |
| Clause 4.6.4.2(Specific Migration Container Zinc) |
- |
125 |
|
This charge is only for Zinc parameter in indian rupees |
| Clause 4.6.4.2(Specific Migration Container Antimony) |
- |
125 |
|
This charge is only for Antimony parameter in indian rupees |
| Clause 4.6.4.2(Specific Migration Container Phthalic acid, bis (2- ethylhexyl) ester (DEHP)) |
- |
1000 |
|
This charge is only for parameter in indian rupees |
| Clause 4.6.4.2(Specific Migration Closure Barium) |
- |
125 |
|
This charge is only for Barium parameter in indian rupees |
| Clause 4.6.4.2(Specific Migration Closure Cobalt) |
- |
125 |
|
This charge is only for Cobalt parameter in indian rupees |
| Clause 4.6.4.2(Specific Migration Closure Copper) |
- |
125 |
|
This charge is only for Copper parameter in indian rupees |
| Clause 4.6.4.2(Specific Migration Closure Iron) |
- |
125 |
|
This charge is only for Iron parameter in indian rupees |
| Clause 4.6.4.2(Specific Migration Closure Lithium) |
- |
125 |
|
This charge is only for Lithium parameter in indian rupees |
| Clause 4.6.4.2(Specific Migration Closure Manganese) |
- |
125 |
|
This charge is only for Manganese parameter in indian rupees |
| Clause 4.6.4.2(Specific Migration Closure Zinc) |
- |
125 |
|
This charge is only for Zinc parameter in indian rupees |
| Clause 4.6.4.2(Specific Migration Closure Antimony) |
- |
125 |
|
This charge is only forAntimony parameter in indian rupees |
| Clause 4.6.4.2(Specific Migration Closure Phthalic acid, bis (2- ethylhexyl) ester (DEHP)) |
- |
1000 |
|
This charge is only for Phthalic Acid parameter in indian rupees |
| Clause 4.1.2.1(Material for Closures (b) Plastic Materials) |
- |
500 |
|
This charge is only for Material parameter in indian rupees |
| Clause 4.1.2.1(Material for Closures (a) Closure materials (Aluminium)) |
- |
500 |
|
This charge is only for Material parameter in indian rupees |
| Clause 4.1.2.1(Material for Closures (c) Combination of plastics and metal) |
- |
500 |
|
This charge is only for Material parameter in indian rupees |
| Clause 4.1.2.2(Materials for Primary Packaging-Closure colourants) |
- |
1000 |
|
This charge is only for clousure Colourants parameter in indian rupees |
| Clause 4.1.2.3(Materials for Primary Packaging-Sleeves for the closure) |
- |
20 |
|
This charge is only for Sleeves for closure parameter in indian rupees |
| Clause 4.1.3(Materials for Primary Packaging-Wad) |
- |
10 |
|
This charge is only for Wad parameter in indian rupees |
| Clause 5.1(Marking) |
- |
10 |
|
This charge is only for Marking parameter in indian rupees |
| Clause 4.6.1.2(Colour-Tint) |
- |
10 |
|
This charge is only for Colour Tint parameter in indian rupees |
|
20 Apr, 2027 |
-
included w.e.f 11-12-2025. |
| 2410 |
AJEO TESTING LABS PVT LTD, GHAZIABAD
| 8178606
| IS 7098 : Part 1 (2025) |
Crosslinked Polyethylene Insulated Thermoplastic Sheathed Cables - Specification Part 1 For Working Voltages up to and Including 1 100 Volts (Second Revision) |
ALL |
60000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl-4(Conductors -Material) |
- |
500 |
|
Rs. 15,000/- for C1,Rs. 35,000 for C2 & Rs 60000 for C3. Additional charge Rs 500 for each core Additional charge of Rs 2000 for optional test , Additional charge of Rs 2000 for Armour test &10% Discount for BIS |
| Cl-5, Table-1 (i)(Tensile strength) |
- |
500 |
|
---- |
| Cl-5, Table-1 (ii) (a)(Elongation at break- Ageing in air oven) |
- |
2500 |
|
---- |
| Cl-5, Table-1 (ii) (b)(Variation in tensile strength, from that without ageing) |
- |
4500 |
|
---- |
| Cl-5, Table-1 (ii) (c)(Variation in elongation at break, from that without ageing) |
- |
2000 |
|
---- |
| Cl-5, Table-1 (iii) (a)(Hot set- Treatment;) |
- |
2000 |
|
---- |
| Cl-5, Table-1 (iii) (b)(Hot set- Elongation under load) |
- |
2000 |
|
---- |
| Cl-5, Table-1 (iii) (c)(Hot set- Permanent elongation after cooling) |
- |
2000 |
|
---- |
| Cl-5, Table-1 (iv)(Shrinkage) |
- |
1500 |
|
---- |
| Cl-5, Table-1 (v)(Water absorption (gravimetric)) |
- |
6000 |
|
---- |
| Cl-5, Table-1 (vi)(Volume resistivity) |
- |
4500 |
|
---- |
| Cl-6.1 (a)(Fillers and inner sheath- Vulcanized or unvulcanized rubber) |
- |
500 |
|
---- |
| Cl-6.1 (B)(Fillers and inner sheath- Thermoplastic materials) |
- |
500 |
|
---- |
| Cl-7(Armouring) |
- |
500 |
|
---- |
| Cl-8(Outer Sheath) |
- |
500 |
|
---- |
| Cl-10.3(Tolerance on Thickness of Insulation) |
- |
1000 |
|
---- |
| Cl-11(Core Identification) |
- |
500 |
|
---- |
| Cl-12(Laying up of Cores) |
- |
500 |
|
---- |
| Cl-13(Inner Sheath (Common Covering)) |
- |
500 |
|
---- |
| Cl-14.1(Armouring- Application) |
- |
500 |
|
---- |
| Cl-14.1.2(armour round wires/formed wires) |
- |
300 |
|
---- |
| Cl-14.2(Type of Armour) |
- |
500 |
|
---- |
| Cl-14.3(Dimensions) |
- |
1000 |
|
---- |
| Cl-14.4(Joints) |
- |
500 |
|
---- |
| Cl-14.5(Resistance) |
- |
2500 |
|
---- |
| Cl-15.3(Thickness of Outer Sheath) |
- |
2000 |
|
---- |
| Cl-16.1 (i) (a)(Test on conductor: Annealing test (for copper);) |
- |
1500 |
|
---- |
| Cl-16.1 (i) (b)(Test on conductor: Tensile test (for aluminium);) |
- |
1500 |
|
---- |
| Cl-16.1 (i) (c)(Test on conductor: Wrapping test (for aluminium);) |
- |
500 |
|
---- |
| Cl-16.1 (i) (d)(Test on conductor: Resistance test) |
- |
3500 |
|
---- |
| Cl-14.6 (a)(Physical tests on round wires/formed wires- Tensile strength) |
- |
2000 |
|
---- |
| Cl-14.6 (b)(Physical tests on round wires/formed wires- Elongation at break) |
- |
2500 |
|
---- |
| Cl-14.6 (c)(Physical tests on round wires/formed wires- Torsion test for round wires) |
- |
2500 |
|
---- |
| Cl-14.6 (d)(Physical tests on round wires/formed wires- Winding test for formed wires) |
- |
2500 |
|
---- |
| Cl-14.6 (e)(Physical tests on round wires/formed wires- Uniformity of zinc coating) |
- |
2500 |
|
----200 |
| Cl-14.6 (f)(Physical tests on round wires/formed wires- Mass of zinc coating) |
- |
2000 |
|
---- |
| Cl-14.6 (g)(Physical tests on round wires/formed wires- Resistivity.) |
- |
4000 |
|
---- |
| Cl-10, 13, 15(Test for thickness of insulation and sheath) |
- |
5000 |
|
---- |
| Cl-16.1 (v) (1)(PVC Sheath- Tensile strength and elongation at break;) |
- |
5000 |
|
---- |
| Cl-16.1 (v) (2)(PVC Sheath- Ageing in air oven) |
- |
5000 |
|
---- |
| Cl-16.1 (v) (3)(PVC Sheath- Loss of mass in air oven) |
- |
5000 |
|
---- |
| Cl-16.1 (v) (5)(PVC Sheath- Hot deformation test) |
- |
300 |
|
---- |
| Cl-16.1 (v) (6)(PVC Sheath- Heat shock test) |
- |
2000 |
|
---- |
| Cl-16.1 (v) (7)(PVC Sheath- Thermal stability) |
- |
3500 |
|
---- |
| Cl-8.3-Table 1A(PE Sheath- Carbon black content) |
- |
3500 |
|
---- |
| Cl-8.3-Table 1A(PE Sheath- Tensile strength and elongation at break before and after ageing) |
- |
6000 |
|
---- |
| Cl-8.3-Table 1A(PE Sheath- Hot deformation) |
- |
2500 |
|
---- |
| Cl-8.3-Table 1A(PE Sheath- Shrinkage test.) |
- |
2000 |
|
---- |
| Cl- Table 1B(LSHF Sheath- Tensile strength and elongation at break before and after ageing) |
- |
6000 |
|
---- |
| Cl- Table 1B(LSHF Sheath- Hot deformation) |
- |
2500 |
|
---- |
| Cl- Table 1B(LSHF Sheath- Water absorption test) |
- |
6000 |
|
---- |
| Cl- Table 1B(LSHF Sheath- Shrinkage test) |
- |
2500 |
|
---- |
| Cl-17.2(High voltage test) |
- |
5000 |
|
---- |
| Cl-17.3(Flammability test) |
- |
3000 |
|
---- |
| Cl-17.4(Oxygen index test (FR, FR-LSH or LSHF Sheath)) |
- |
5000 |
|
---- |
| Cl-17.5(Flame retardance test on single cable) |
- |
5000 |
|
---- |
| Cl-17.6(Flame retardance test on bunched cables (FR, FR-LSH or LSHF Sheathed Cables)) |
- |
8000 |
|
---- |
| Cl-17.7(Test for halogen acid evolution (FR-LSH or LSHF Outer Sheath)) |
- |
8000 |
|
---- |
| Cl-17.8(Smoke density test (FR-LSH or LSHF Sheath)) |
- |
8000 |
|
---- |
| Cl-17.9(Temperature index test; (FR, FR-LSH or LSHF Sheath)) |
- |
8000 |
|
---- |
| Cl-17.10(Test for pH and conductivity of LSHF Sheath) |
- |
8000 |
|
---- |
| Cl-17.11(Test for light transmission for LSHF Sheathed Cables) |
- |
35000 |
|
---- |
| Cl-16.4 (i)(Cold bend test for outer sheath) |
- |
3500 |
|
---- |
| Cl-16.4 (ii)(Cold impact test for outer sheath) |
- |
3500 |
|
---- |
| Cl-16.4 (iii)(Cold elongation test for LSHF sheath) |
- |
12000 |
|
---- |
| Cl-4(Conductors -Material) |
- |
500 |
|
---- |
| Cl-5, Table-1 (i)(Tensile strength) |
- |
2000 |
|
---- |
| Cl-5, Table-1 (ii) (a)(Elongation at break- Ageing in air oven) |
- |
2000 |
|
---- |
| Cl-5, Table-1 (ii) (b)(Variation in tensile strength, from that without ageing) |
- |
4500 |
|
---- |
| Cl-5, Table-1 (ii) (c)(Variation in elongation at break, from that without ageing) |
- |
4500 |
|
---- |
| Cl-5, Table-1 (iii) (a)(Hot set- Treatment;) |
- |
2000 |
|
---- |
| Cl-5, Table-1 (iii) (b)(Hot set- Elongation under load) |
- |
2000 |
|
---- |
| Cl-5, Table-1 (iii) (c)(Hot set- Permanent elongation after cooling) |
- |
2000 |
|
---- |
| Cl-5, Table-1 (iv)(Shrinkage) |
- |
1500 |
|
---- |
| Cl-5, Table-1 (v)(Water absorption (gravimetric)) |
- |
5500 |
|
---- |
| Cl-5, Table-1 (vi)(Volume resistivity) |
- |
4000 |
|
---- |
| Cl-6.1 (a)(Fillers and inner sheath- Vulcanized or unvulcanized rubber) |
- |
500 |
|
---- |
| Cl-6.1 (B)(Fillers and inner sheath- Thermoplastic materials) |
- |
500 |
|
---- |
| Cl-7(Armouring) |
- |
1000 |
|
---- |
| Cl-8(Outer Sheath) |
- |
1000 |
|
---- |
| Cl-10.3(Tolerance on Thickness of Insulation) |
- |
500 |
|
---- |
| Cl-11(Core Identification) |
- |
500 |
|
---- |
| Cl-12(Laying up of Cores) |
- |
500 |
|
---- |
| Cl-13(Inner Sheath (Common Covering)) |
- |
500 |
|
---- |
| Cl-14.1(Armouring- Application) |
- |
500 |
|
---- |
| Cl-14.1.2(armour round wires/formed wires) |
- |
500 |
|
---- |
| Cl-14.2(Type of Armour) |
- |
500 |
|
---- |
| Cl-14.3(Dimensions) |
- |
1000 |
|
---- |
| Cl-14.4(Joints) |
- |
1500 |
|
---- |
| Cl-14.5(Resistance) |
- |
4500 |
|
---- |
| Cl-15.3(Thickness of Outer Sheath) |
- |
1500 |
|
---- |
| Cl-16.1 (i) (a)(Test on conductor: Annealing test (for copper);) |
- |
1500 |
|
---- |
| Cl-16.1 (i) (b)(Test on conductor: Tensile test (for aluminium);) |
- |
1500 |
|
---- |
| Cl-16.1 (i) (c)(Test on conductor: Wrapping test (for aluminium);) |
- |
800 |
|
---- |
| Cl-16.1 (i) (d)(Test on conductor: Resistance test) |
- |
2500 |
|
---- |
| Cl-14.6 (a)(Physical tests on round wires/formed wires- Tensile strength) |
- |
3500 |
|
---- |
| Cl-14.6 (b)(Physical tests on round wires/formed wires- Elongation at break) |
- |
2000 |
|
---- |
| Cl-14.6 (c)(Physical tests on round wires/formed wires- Torsion test for round wires) |
- |
2500 |
|
---- |
| Cl-14.6 (d)(Physical tests on round wires/formed wires- Winding test for formed wires) |
- |
2500 |
|
---- |
| Cl-14.6 (e)(Physical tests on round wires/formed wires- Uniformity of zinc coating) |
- |
2500 |
|
---- |
| Cl-14.6 (f)(Physical tests on round wires/formed wires- Mass of zinc coating) |
- |
2500 |
|
---- |
| Cl-14.6 (g)(Physical tests on round wires/formed wires- Resistivity.) |
- |
2500 |
|
---- |
| Cl-10, 13, 15(Test for thickness of insulation and sheath) |
- |
1500 |
|
---- |
| Cl-16.1 (v) (1)(PVC Sheath- Tensile strength and elongation at break;) |
- |
2000 |
|
---- |
| Cl-16.1 (v) (2)(PVC Sheath- Ageing in air oven) |
- |
4500 |
|
---- |
| Cl-16.1 (v) (3)(PVC Sheath- Loss of mass in air oven) |
- |
3500 |
|
---- |
| Cl-16.1 (v) (5)(PVC Sheath- Hot deformation test) |
- |
3500 |
|
---- |
| Cl-16.1 (v) (6)(PVC Sheath- Heat shock test) |
- |
500 |
|
---- |
| Cl-16.1 (v) (7)(PVC Sheath- Thermal stability) |
- |
3000 |
|
---- |
| Cl-8.3-Table 1A(PE Sheath- Carbon black content) |
- |
4500 |
|
---- |
| Cl-8.3-Table 1A(PE Sheath- Tensile strength and elongation at break before and after ageing) |
- |
2500 |
|
---- |
| Cl-8.3-Table 1A(PE Sheath- Hot deformation) |
- |
3000 |
|
---- |
| Cl-8.3-Table 1A(PE Sheath- Shrinkage test.) |
- |
4500 |
|
---- |
| Cl- Table 1B(LSHF Sheath- Tensile strength and elongation at break before and after ageing) |
- |
4000 |
|
---- |
| Cl- Table 1B(LSHF Sheath- Hot deformation) |
- |
3500 |
|
---- |
| Cl- Table 1B(LSHF Sheath- Water absorption test) |
- |
5000 |
|
---- |
| Cl- Table 1B(LSHF Sheath- Shrinkage test) |
- |
1500 |
|
---- |
| Cl-17.2(High voltage test) |
- |
4500 |
|
---- |
| Cl-17.3(Flammability test) |
- |
3000 |
|
---- |
| Cl-17.4(Oxygen index test (FR, FR-LSH or LSHF Sheath)) |
- |
4500 |
|
---- |
| Cl-17.5(Flame retardance test on single cable) |
- |
4000 |
|
---- |
| Cl-17.6(Flame retardance test on bunched cables (FR, FR-LSH or LSHF Sheathed Cables)) |
- |
8000 |
|
---- |
| Cl-17.7(Test for halogen acid evolution (FR-LSH or LSHF Outer Sheath)) |
- |
3500 |
|
---- |
| Cl-17.8(Smoke density test (FR-LSH or LSHF Sheath)) |
- |
8000 |
|
---- |
| Cl-17.9(Temperature index test; (FR, FR-LSH or LSHF Sheath)) |
- |
4500 |
|
---- |
| Cl-17.10(Test for pH and conductivity of LSHF Sheath) |
- |
4500 |
|
---- |
| Cl-17.11(Test for light transmission for LSHF Sheathed Cables) |
- |
10000 |
|
---- |
| Cl-16.4 (i)(Cold bend test for outer sheath) |
- |
2500 |
|
---- |
| Cl-16.4 (ii)(Cold impact test for outer sheath) |
- |
1500 |
|
---- |
| Cl-16.4 (iii)(Cold elongation test for LSHF sheath) |
- |
10000 |
|
---- |
| Cl-4(Conductors -Material) |
- |
1000 |
|
---- |
| Cl-5, Table-1 (i)(Tensile strength) |
- |
500 |
|
---- |
| Cl-5, Table-1 (ii) (a)(Elongation at break- Ageing in air oven) |
- |
4500 |
|
---- |
| Cl-5, Table-1 (ii) (b)(Variation in tensile strength, from that without ageing) |
- |
4500 |
|
---- |
| Cl-5, Table-1 (ii) (c)(Variation in elongation at break, from that without ageing) |
- |
4500 |
|
---- |
| Cl-5, Table-1 (iii) (a)(Hot set- Treatment;) |
- |
4500 |
|
---- |
| Cl-5, Table-1 (iii) (b)(Hot set- Elongation under load) |
- |
3000 |
|
---- |
| Cl-5, Table-1 (iii) (c)(Hot set- Permanent elongation after cooling) |
- |
3000 |
|
---- |
| Cl-5, Table-1 (iv)(Shrinkage) |
- |
2500 |
|
--- |
| Cl-5, Table-1 (v)(Water absorption (gravimetric)) |
- |
5500 |
|
---- |
| Cl-5, Table-1 (vi)(Volume resistivity) |
- |
5500 |
|
---- |
| Cl-6.1 (a)(Fillers and inner sheath- Vulcanized or unvulcanized rubber) |
- |
500 |
|
---- |
| Cl-6.1 (B)(Fillers and inner sheath- Thermoplastic materials) |
- |
500 |
|
---- |
| Cl-7(Armouring) |
- |
500 |
|
---- |
| Cl-8(Outer Sheath) |
- |
500 |
|
---- |
| Cl-10.3(Tolerance on Thickness of Insulation) |
- |
1000 |
|
---- |
| Cl-11(Core Identification) |
- |
1000 |
|
---- |
| Cl-12(Laying up of Cores) |
- |
1000 |
|
---- |
| Cl-13(Inner Sheath (Common Covering)) |
- |
1000 |
|
---- |
| Cl-14.1(Armouring- Application) |
- |
1000 |
|
---- |
| Cl-14.1.2(armour round wires/formed wires) |
- |
1000 |
|
---- |
| Cl-14.2(Type of Armour) |
- |
500 |
|
---- |
| Cl-14.3(Dimensions) |
- |
500 |
|
---- |
| Cl-14.4(Joints) |
- |
500 |
|
---- |
| Cl-14.5(Resistance) |
- |
2500 |
|
---- |
| Cl-15.3(Thickness of Outer Sheath) |
- |
1500 |
|
---- |
| Cl-16.1 (i) (a)(Test on conductor: Annealing test (for copper);) |
- |
1500 |
|
---- |
| Cl-16.1 (i) (b)(Test on conductor: Tensile test (for aluminium);) |
- |
1500 |
|
---- |
| Cl-16.1 (i) (c)(Test on conductor: Wrapping test (for aluminium);) |
- |
500 |
|
---- |
| Cl-16.1 (i) (d)(Test on conductor: Resistance test) |
- |
2500 |
|
---- |
| Cl-14.6 (a)(Physical tests on round wires/formed wires- Tensile strength) |
- |
1500 |
|
---- |
| Cl-14.6 (b)(Physical tests on round wires/formed wires- Elongation at break) |
- |
2000 |
|
---- |
| Cl-14.6 (c)(Physical tests on round wires/formed wires- Torsion test for round wires) |
- |
2000 |
|
---- |
| Cl-14.6 (d)(Physical tests on round wires/formed wires- Winding test for formed wires) |
- |
2000 |
|
---- |
| Cl-14.6 (e)(Physical tests on round wires/formed wires- Uniformity of zinc coating) |
- |
2000 |
|
---- |
| Cl-14.6 (f)(Physical tests on round wires/formed wires- Mass of zinc coating) |
- |
2000 |
|
---- |
| Cl-14.6 (g)(Physical tests on round wires/formed wires- Resistivity.) |
- |
2000 |
|
---- |
| Cl-10, 13, 15(Test for thickness of insulation and sheath) |
- |
1000 |
|
-------- |
| Cl-16.1 (v) (1)(PVC Sheath- Tensile strength and elongation at break;) |
- |
1500 |
|
---- |
| Cl-16.1 (v) (2)(PVC Sheath- Ageing in air oven) |
- |
4500 |
|
---- |
| Cl-16.1 (v) (3)(PVC Sheath- Loss of mass in air oven) |
- |
4500 |
|
---- |
| Cl-16.1 (v) (5)(PVC Sheath- Hot deformation test) |
- |
2000 |
|
---- |
| Cl-16.1 (v) (6)(PVC Sheath- Heat shock test) |
- |
2000 |
|
---- |
| Cl-16.1 (v) (7)(PVC Sheath- Thermal stability) |
- |
3000 |
|
---- |
| Cl-8.3-Table 1A(PE Sheath- Carbon black content) |
- |
8000 |
|
---- |
| Cl-8.3-Table 1A(PE Sheath- Tensile strength and elongation at break before and after ageing) |
- |
2000 |
|
---- |
| Cl-8.3-Table 1A(PE Sheath- Hot deformation) |
- |
2500 |
|
---- |
| Cl-8.3-Table 1A(PE Sheath- Shrinkage test.) |
- |
1500 |
|
---- |
| Cl- Table 1B(LSHF Sheath- Tensile strength and elongation at break before and after ageing) |
- |
2000 |
|
---- |
| Cl- Table 1B(LSHF Sheath- Hot deformation) |
- |
2500 |
|
---- |
| Cl- Table 1B(LSHF Sheath- Water absorption test) |
- |
7000 |
|
---- |
| Cl- Table 1B(LSHF Sheath- Shrinkage test) |
- |
1500 |
|
---- |
| Cl-17.2(High voltage test) |
- |
4500 |
|
---- |
| Cl-17.3(Flammability test) |
- |
2500 |
|
---- |
| Cl-17.4(Oxygen index test (FR, FR-LSH or LSHF Sheath)) |
- |
5000 |
|
---- |
| Cl-17.5(Flame retardance test on single cable) |
- |
4500 |
|
---- |
| Cl-17.6(Flame retardance test on bunched cables (FR, FR-LSH or LSHF Sheathed Cables)) |
- |
8000 |
|
---- |
| Cl-17.7(Test for halogen acid evolution (FR-LSH or LSHF Outer Sheath)) |
- |
4500 |
|
---- |
| Cl-17.8(Smoke density test (FR-LSH or LSHF Sheath)) |
- |
5000 |
|
---- |
| Cl-17.9(Temperature index test; (FR, FR-LSH or LSHF Sheath)) |
- |
4500 |
|
---- |
| Cl-17.10(Test for pH and conductivity of LSHF Sheath) |
- |
5000 |
|
---- |
| Cl-17.11(Test for light transmission for LSHF Sheathed Cables) |
- |
8000 |
|
---- |
| Cl-16.4 (i)(Cold bend test for outer sheath) |
- |
1500 |
|
---- |
| Cl-16.4 (ii)(Cold impact test for outer sheath) |
- |
2000 |
|
---- |
| Cl-16.4 (iii)(Cold elongation test for LSHF sheath) |
- |
10000 |
|
---- |
|
- |
-
included w.e.f 05.01.2026 |
| 2411 |
Atckon Laboratories LLP, Bahadurgarh
| 8186436
| IS 6343 (1982) |
Specification for Door Closers (Pneumatically Regulated) for Light Doors Weighing up to 40 kg |
ALL |
14500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6.1(Weight) |
- |
500 |
|
- |
| 6.5(leakage in the air pressure.) |
- |
500 |
|
- |
| 7.1(Angle) |
- |
500 |
|
- |
| 7.2(Endurance test) |
- |
10000 |
|
- |
| 8(Finish Test) |
- |
2000 |
|
- |
| Cl. 6.2(GENERAL REQUIREMENTS) |
- |
400 |
|
- |
| Cl. 6.3(GENERAL REQUIREMENTS) |
- |
400 |
|
- |
| Cl. 6.4(GENERAL REQUIREMENTS) |
- |
400 |
|
- |
| Cl. 6.6(GENERAL REQUIREMENTS) |
- |
300 |
|
- |
|
- |
-
Included w.e.f. 29.10.2025 |
| 2412 |
INTERNATIONAL TESTING AND COMPLIANCE (OPC) PRIVATE LIMITED
| 8188026
| IS 302 : Part 2 : Sec 75 (2018) |
Safety of Household and Similar Electrical Appliances Part 2 Particular Requirements Section 75 Commercial Dispensing Appliances and Vending Machines |
- |
150000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 32(Radiation, toxicity and similar hazards) |
- |
4000 |
|
- |
| 31(Resistance to rusting) |
- |
3000 |
|
- |
| 30.2.4(Resistance to heat and fire) |
- |
3000 |
|
- |
| 30.2(Resistance to heat and fire) |
- |
3000 |
|
- |
| 30.1(Resistance to heat and fire) |
- |
3000 |
|
- |
| 29.3(Clearances, creepage distances and solid insulation) |
- |
3000 |
|
- |
| 29.2(Clearances, creepage distances and solid insulation) |
- |
3000 |
|
- |
| 29.2(Clearances, creepage distances and solid insulation) |
- |
3000 |
|
- |
| 29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation) |
- |
3000 |
|
- |
| 29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation) |
- |
3000 |
|
- |
| 28.2 to 28.4(Screws and connections) |
- |
3000 |
|
- |
| 28.1, Table No.-14(Screws and connections) |
- |
3000 |
|
- |
| 27.6(Provision for earthing) |
- |
3000 |
|
- |
| 27.5(Provision for earthing) |
- |
3000 |
|
- |
| 27.1 to 27.4(Provision for earthing) |
- |
3000 |
|
- |
| 26.10 & 26.11(Terminals for external conductors) |
- |
3000 |
|
- |
| 26.9(Terminals for external conductors) |
- |
3000 |
|
- |
| 26.1 to 26.8(Terminals for external conductors) |
- |
3000 |
|
- |
| 25.16 to 25.25(Supply connection and external flexible cords) |
- |
3000 |
|
- |
| 25.15(Supply connection and external flexible cords) |
- |
3000 |
|
- |
| 25.14(Supply connection and external flexible cords) |
- |
3000 |
|
- |
| 25.9 to 25.13(Supply connection and external flexible cords) |
- |
3000 |
|
- |
| 25.8, Table No.-11(Supply connection and external flexible cords) |
- |
3000 |
|
- |
| 25.5 to 25.7(Supply connection and external flexible cords) |
- |
3000 |
|
- |
| 25.4(Supply connection and external flexible cords) |
- |
3000 |
|
- |
| 25.3(Supply connection and external flexible cords) |
- |
3000 |
|
- |
| 25.2(Supply connection and external flexible cords) |
- |
3000 |
|
- |
| 25.1(Supply connection and external flexible cords) |
- |
3000 |
|
- |
| 24.101 to 24.103(Components) |
- |
3000 |
|
- |
| 24.2 to 24.6(Components) |
- |
3000 |
|
- |
| 24.1(Components) |
- |
3000 |
|
- |
| 23.101 to 23.102(Internal wiring) |
- |
3000 |
|
- |
| 23.6 to 23.10(Internal wiring) |
- |
3000 |
|
- |
| 23.5(Internal wiring) |
- |
3000 |
|
- |
| 23.4(Internal wiring) |
- |
3000 |
|
- |
| 23.3(Internal wiring) |
- |
3000 |
|
- |
| 23.1 & 23.2(Internal wiring) |
- |
3000 |
|
- |
| 22.101 to 22.114(Constructions) |
- |
3000 |
|
- |
| 22.13 to 22.48(Constructions) |
- |
3000 |
|
- |
| 22.12(Constructions) |
- |
3000 |
|
- |
| 22.11(Constructions) |
- |
3000 |
|
- |
| 22.11(Constructions) |
- |
3000 |
|
- |
| 22.7 to 22.10(Constructions) |
- |
3000 |
|
- |
| 22.6(Constructions) |
- |
3000 |
|
- |
| 22.5(Constructions) |
- |
3000 |
|
- |
| 22.4(Constructions) |
- |
3000 |
|
- |
| 22.3(Constructions) |
- |
3000 |
|
- |
| 22.2(Constructions) |
- |
3000 |
|
- |
| 22.1(Constructions) |
- |
3000 |
|
- |
| 21.2(MECHANICAL STRENGTH) |
- |
3000 |
|
- |
| 21.1(MECHANICAL STRENGTH) |
- |
3000 |
|
- |
| 20.2(Stability and mechanical hazards) |
- |
3000 |
|
- |
| 20.1(Stability and mechanical hazards) |
- |
3000 |
|
- |
| 19.101 and 19.102(ABNORMAL OPERATION) |
- |
3000 |
|
- |
| 19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION) |
- |
3000 |
|
- |
| 17(Overload protection of transformers and associated circuits) |
- |
3000 |
|
- |
| 16.3(Insulation resistance test) |
- |
3000 |
|
- |
| 16.3(Electric strength test) |
- |
3000 |
|
- |
| 16.1 & 16.2(Leakage current test) |
- |
3000 |
|
- |
| 15.102(Moisture resistance) |
- |
3000 |
|
- |
| 15.102(Moisture resistance) |
- |
3000 |
|
- |
| 15.101(Moisture resistance) |
- |
3000 |
|
- |
| 15.3(Moisture resistance) |
- |
3000 |
|
- |
| 15.2(Moisture resistance) |
- |
3000 |
|
- |
| 15.1(Moisture resistance) |
- |
3000 |
|
- |
| 14, Table No.- 6 & Table No.-16(Transient over voltages) |
- |
3000 |
|
- |
| 13.3 and Table No.- 4(Electric strength test) |
- |
3000 |
|
- |
| 13.1, 13.2(Leakage current test) |
- |
3000 |
|
- |
| 11.1 to 11.8, Table No.-3(Heating) |
- |
3000 |
|
- |
| 10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current) |
- |
3000 |
|
- |
| 8.1.5(Protection against access to live parts) |
- |
3000 |
|
- |
| 8.1.4(Protection against access to live parts) |
- |
3000 |
|
- |
| 8.1.3(Protection against access to live parts) |
- |
3000 |
|
- |
| 8.1.2(Protection against access to live parts) |
- |
3000 |
|
- |
| 8.1, 8.1.1 & 8.2(Protection against access to live parts) |
- |
3000 |
|
- |
| 7.14(Legibility & Durability of Markings test) |
- |
2000 |
|
- |
| 7.1 to 7.13, 7.15, 7.16(Marking) |
- |
2000 |
|
- |
| 32(Radiation, toxicity and similar hazards) |
- |
3000 |
|
- |
| 31(Resistance to rusting) |
- |
3000 |
|
- |
| 30.2.4(Resistance to heat and fire) |
- |
3000 |
|
- |
| 30.2(Resistance to heat and fire) |
- |
3000 |
|
- |
| 30.1(Resistance to heat and fire) |
- |
3000 |
|
- |
| 29.3(Clearances, creepage distances and solid insulation) |
- |
3000 |
|
- |
| 29.2(Clearances, creepage distances and solid insulation) |
- |
3000 |
|
- |
| 29.2(Clearances, creepage distances and solid insulation) |
- |
3000 |
|
- |
| 29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation) |
- |
3000 |
|
- |
| 29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation) |
- |
3000 |
|
- |
| 28.2 to 28.4(Screws and connections) |
- |
3000 |
|
- |
| 28.1, Table No.-14(Screws and connections) |
- |
3000 |
|
- |
| 27.6(Provision for earthing) |
- |
3000 |
|
- |
| 27.5(Provision for earthing) |
- |
3000 |
|
- |
| 27.1 to 27.4(Provision for earthing) |
- |
3000 |
|
- |
| 26.10 & 26.11(Terminals for external conductors) |
- |
3000 |
|
- |
| 26.9(Terminals for external conductors) |
- |
3000 |
|
- |
| 26.1 to 26.8(Terminals for external conductors) |
- |
3000 |
|
- |
| 25.16 to 25.25(Supply connection and external flexible cords) |
- |
3000 |
|
- |
| 25.15(Supply connection and external flexible cords) |
- |
3000 |
|
- |
| 25.14(Supply connection and external flexible cords) |
- |
3000 |
|
- |
| 25.9 to 25.13(Supply connection and external flexible cords) |
- |
3000 |
|
- |
| 25.8, Table No.-11(Supply connection and external flexible cords) |
- |
3000 |
|
- |
| 25.5 to 25.7(Supply connection and external flexible cords) |
- |
3000 |
|
- |
| 25.4(Supply connection and external flexible cords) |
- |
3000 |
|
- |
| 25.3(Supply connection and external flexible cords) |
- |
3000 |
|
- |
| 25.2(Supply connection and external flexible cords) |
- |
3000 |
|
- |
| 25.1(Supply connection and external flexible cords) |
- |
3000 |
|
- |
| 24.101 to 24.103(Components) |
- |
3000 |
|
- |
| 24.2 to 24.6(Components) |
- |
3000 |
|
- |
| 24.1(Components) |
- |
3000 |
|
- |
| 23.101 to 23.102(Internal wiring) |
- |
3000 |
|
- |
| 23.6 to 23.10(Internal wiring) |
- |
3000 |
|
- |
| 23.5(Internal wiring) |
- |
3000 |
|
- |
| 23.4(Internal wiring) |
- |
3000 |
|
- |
| 23.3(Internal wiring) |
- |
3000 |
|
- |
| 23.1 & 23.2(Internal wiring) |
- |
3000 |
|
- |
| 22.101 to 22.114(Constructions) |
- |
3000 |
|
- |
| 22.13 to 22.48(Constructions) |
- |
3000 |
|
- |
| 22.12(Constructions) |
- |
3000 |
|
- |
| 22.11(Constructions) |
- |
3000 |
|
- |
| 22.11(Constructions) |
- |
3000 |
|
- |
| 22.7 to 22.10(Constructions) |
- |
3000 |
|
- |
| 22.6(Constructions) |
- |
3000 |
|
- |
| 22.5(Constructions) |
- |
3000 |
|
- |
| 22.4(Constructions) |
- |
3000 |
|
- |
| 22.3(Constructions) |
- |
3000 |
|
- |
| 22.2(Constructions) |
- |
3000 |
|
- |
| 22.1(Constructions) |
- |
3000 |
|
- |
| 21.2(MECHANICAL STRENGTH) |
- |
3000 |
|
- |
| 21.1(MECHANICAL STRENGTH) |
- |
3000 |
|
- |
| 20.2(Stability and mechanical hazards) |
- |
3000 |
|
- |
| 20.1(Stability and mechanical hazards) |
- |
3000 |
|
- |
| 19.101 and 19.102(ABNORMAL OPERATION) |
- |
3000 |
|
- |
| 19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION) |
- |
3000 |
|
- |
| 17(Overload protection of transformers and associated circuits) |
- |
3000 |
|
- |
| 16.3(Insulation resistance test) |
- |
3000 |
|
- |
| 16.3(Electric strength test) |
- |
3000 |
|
- |
| 16.1 & 16.2(Leakage current test) |
- |
3000 |
|
- |
| 15.102(Moisture resistance) |
- |
3000 |
|
- |
| 15.102(Moisture resistance) |
- |
3000 |
|
- |
| 15.101(Moisture resistance) |
- |
3000 |
|
- |
| 15.3(Moisture resistance) |
- |
3000 |
|
- |
| 15.2(Moisture resistance) |
- |
3000 |
|
- |
| 15.1(Moisture resistance) |
- |
3000 |
|
- |
| 14, Table No.- 6 & Table No.-16(Transient over voltages) |
- |
3000 |
|
- |
| 13.3 and Table No.- 4(Electric strength test) |
- |
3000 |
|
- |
| 13.1, 13.2(Leakage current test) |
- |
3000 |
|
- |
| 11.1 to 11.8, Table No.-3(Heating) |
- |
3000 |
|
- |
| 10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current) |
- |
3000 |
|
- |
| 8.1.5(Protection against access to live parts) |
- |
3000 |
|
- |
| 8.1.4(Protection against access to live parts) |
- |
3000 |
|
- |
| 8.1.3(Protection against access to live parts) |
- |
3000 |
|
- |
| 8.1.2(Protection against access to live parts) |
- |
3000 |
|
- |
| 8.1, 8.1.1 & 8.2(Protection against access to live parts) |
- |
3000 |
|
- |
| 7.14(Legibility & Durability of Markings test) |
- |
2000 |
|
- |
| 7.1 to 7.13, 7.15, 7.16(Marking) |
- |
2000 |
|
- |
| 19.11.4.1(Electrostatic discharges) |
- |
15000 |
|
- |
| 19.11.4.3(Fast transient bursts) |
- |
15000 |
|
- |
| 19.11.4.4(Surge immunity test) |
- |
15000 |
|
- |
| 19.11.4.7(Harmonics) |
- |
15000 |
|
- |
|
- |
-
"Included w.e.f 25.11.2025
19.11.4.2 (Radiated fields)
19.11.4.5 (Immunity to conducted discharges)
19.11.4.6 (Class 3 Voltage dips and interruptions)" |
| 2413 |
JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR
| 9164606
| IS 18513 (2023) |
Hot-Dip Zinc- Aluminium-Magnesium Alloy Coated Steel Sheets Plates and Strips - Specification |
- |
20950 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Clause. 5.4(Surface Finish) |
- |
1500 |
|
- |
| Clause. 7.0(Material) |
- |
3450 |
|
- |
| Clause. 8.0(Coating Adherence) |
- |
1500 |
|
- |
| Clause. 8.0(Coating Mass) |
- |
1500 |
|
- |
| Clause. 10.0(Tensile Test) |
- |
2500 |
|
- |
| Clause. 10.0(Yield Stress or Proof stress) |
- |
2500 |
|
- |
| Clause. 10.0(Elongation) |
- |
2000 |
|
- |
| Clause. 10.0(Plastic strain Ratio) |
- |
2000 |
|
- |
| Clause. 10.0(Tensile Strain Hardening Component) |
- |
2500 |
|
- |
| Clause. 10.0(Bake Hardening Index) |
- |
1500 |
|
- |
| Clause. 10.0(Hardness Test) |
- |
1500 |
|
- |
| Clause. 10.0(Bend Test) |
- |
1500 |
|
- |
| Clause.11.0(Dimensions, Shape & Tolerances) |
- |
1000 |
|
- |
| 7(C) |
- |
500 |
|
- |
| 7(Mn) |
- |
500 |
|
- |
| 7(P) |
- |
500 |
|
- |
| 7(S) |
- |
500 |
|
- |
| 7(Si) |
- |
500 |
|
- |
| 7(N) |
- |
500 |
|
- |
| 7(Cr) |
- |
500 |
|
- |
| 7(Mo) |
- |
500 |
|
- |
| 7(Ni) |
- |
500 |
|
- |
| 7(Al) |
- |
500 |
|
- |
| 7(B) |
- |
500 |
|
- |
| 7(Ti) |
- |
500 |
|
- |
| 7(V) |
- |
500 |
|
- |
| 7(Nb) |
- |
500 |
|
- |
|
- |
-
Included w.e.f. 29.10.2025 |
| 2414 |
JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR
| 9164606
| IS 1897 (2008) |
Copper strip for electrical purposes - Specification (Third Revision) |
- |
14400 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| CLAUSE 4(SUPPLY OF MATERIAL) |
- |
100 |
|
- |
| CLAUSE 6(CHEMICAL COMPOSITION) |
- |
7000 |
|
- |
| CLAUSE 8(MECHANICAL PROPERTIES) |
- |
2500 |
|
- |
| CLAUSE 8.2(Bend Test) |
- |
500 |
|
- |
| CLAUSE 9(ELECTRICAL RESISTIVITY TEST) |
- |
3000 |
|
- |
| CLAUSE 10(TEST FOR CONTROLLED PROOF RESISTANCE (OPTIONAL)) |
- |
0 |
|
- |
| CLAUSE 11(DlMENSIONS AND TOLERANCES) |
- |
1300 |
|
- |
| CLAUSE 13(RETEST) |
- |
0 |
|
- |
| Cl. 8.3(Edgewise bending,) |
- |
500 |
|
- |
| Cl. 8.3(Thickness) |
- |
1300 |
|
- |
| Cl. 8.3(Tensile) |
- |
2500 |
|
- |
| Cl. 8.3(Elongation) |
- |
2500 |
|
- |
| Cl. 8.3(Hardness) |
- |
2500 |
|
- |
|
- |
-
Included w.e.f. 29.10.2025 |
| 2415 |
JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR
| 9164606
| IS 18480 (2025) |
Self-Tapping Screws - Specification (first revision) |
- |
29800 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Clause. 4.0(Dimension.) |
- |
13800 |
|
For dimensional and other qualitative tests. |
| Clause. 4.0(Thread size.) |
- |
13800 |
|
For dimensional and other qualitative tests. |
| Clause. 4.0(Length) |
- |
13800 |
|
For dimensional and other qualitative tests. |
| Clause.5.0(Dimenssions.) |
- |
13800 |
|
For dimensional and other qualitative tests. |
| Clause.6.1(Steel drilling screws) |
- |
16000 |
|
For mechanical tests |
| Clause. 6.2(Stainless steel Drilling Screws) |
- |
16000 |
|
For mechanical tests |
| Clause. 7.0(Threads) |
- |
13800 |
|
For dimensional and other qualitative tests. |
| Clause. 8.0(Tolerance) |
- |
13800 |
|
For dimensional and other qualitative tests. |
| Clause 9.0(Finish(coating)) |
- |
13800 |
|
For dimensional and other qualitative tests. |
| Clause.10(Designation) |
- |
13800 |
|
For dimensional and other qualitative tests. |
| Clause.10(Marking) |
- |
13800 |
|
For dimensional and other qualitative tests. |
|
- |
-
Included w.e.f. 29.10.2025 |
| 2416 |
JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR
| 9164606
| IS 17790 (2022) |
INSULATED FLASK FOR DOMESTIC USE SPECIFICATION |
- |
27800 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.0(Manufacture and Workmanship) |
- |
500 |
|
- |
| 5.3(Welding Defects) |
- |
500 |
|
- |
| 7.1(Material) |
- |
100 |
|
- |
| 7.1.2.1 & 7.1.2.2(Thickness) |
- |
500 |
|
- |
| 7.1.3(Coating Thickness) |
- |
1000 |
|
- |
| 7.1.3(Material – coating cadmium) |
- |
1000 |
|
- |
| 7.1.2.2(Bisphenol A (BPA)) |
- |
1500 |
|
- |
| 7.1.4.3(O-Ring / Washer- Defects) |
- |
500 |
|
- |
| 7.2(Capacity) |
- |
250 |
|
- |
| 7.3(Heat Retention Capability) |
- |
800 |
|
- |
| 7.4(Cold Retention Capability) |
- |
800 |
|
- |
| 7.5.1(Drop Impact Test) |
- |
800 |
|
- |
| 7.5.2(Pendulum Impact Test) |
- |
800 |
|
- |
| 7.6(Fixing Strength of the Handle) |
- |
800 |
|
- |
| 7.7(Test for Strength of Shoulder Strap) |
- |
800 |
|
- |
| 7.8(Test for strength of cord) |
- |
800 |
|
- |
| 7.9(Leakage Test) |
- |
1200 |
|
- |
| 7.10(Joint Leak Test) |
- |
1200 |
|
- |
| 7.11(Staining Test) |
- |
1200 |
|
- |
| 7.13(Seepage test) |
- |
1200 |
|
- |
| 7.14(Test for Lever, device for operating Or regulating flow test) |
- |
1200 |
|
- |
| 7.15(Test for length of the shoulder cap) |
- |
1200 |
|
- |
| 7.16(Stability of Flask) |
- |
1200 |
|
- |
| 7.17(Pour Test) |
- |
1200 |
|
- |
| 9.1(Marking) |
- |
500 |
|
- |
| 9.2(BIS certification marking) |
- |
100 |
|
- |
| 10(Packaging) |
- |
500 |
|
- |
| 7.1.3(Coating- Adhesion test) |
- |
1000 |
|
- |
| 7.1.3(Coating - Thickness test) |
- |
1000 |
|
- |
| 7.1.3(Coating- Salt water corrosion test) |
- |
1000 |
|
- |
| 7.1.4.1(Stopper) |
- |
500 |
|
- |
| 7.1.4.2(O-ring/washer- Overall migration) |
- |
500 |
|
- |
| 7.1.4.2(O-ring/washer- Shore hardness) |
- |
500 |
|
- |
| 7.1.4.2(O-ring/washer- BPA) |
- |
1200 |
|
- |
| 7.1.5(Auxillary closure) |
- |
500 |
|
- |
| 7.12(Check for PUF (Polyurethane Foam) or Any Other Similar Thermal Insulation Material) |
- |
500 |
|
- |
| 7.18(Endurance Test for O-Ring, Washer and Stopper) |
- |
1000 |
|
- |
| Cl-5.3(Welding Electrode) |
- |
500 |
|
- |
| Cl.7.1.2.1(Test for leaching) |
- |
500 |
|
- |
| Cl. 7.1.2.1(Sensorial Test) |
- |
500 |
|
- |
| Cl-7.1.3, Table-1(Lead Limit) |
- |
500 |
|
- |
|
- |
-
Included w.e.f. 29.10.2025 |
| 2417 |
VERTEX TESTING LABORATORY PRIVATE LIMITED, GHAZIABAD
| 8185906
| IS 848 (2025) |
Synthetic Resin Adhesives for Plywood (Phenolic, Aminoplastic and Bio-Materials Based) - Specification ( Third Revision ) |
BWP,BWR,MR/All Type |
7346 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| As per Clause 4 Table 1(TYPES) |
- |
1000 |
|
- |
| As per Clause 6.6(SETTING TIMES AND CONDITIONS) |
- |
1000 |
|
- |
| As per Clause 7.3.2 Table 1(i)(Cyclic Test For BWP Type) |
- |
1000 |
|
- |
| As per Clause 7.3.2 Table 1(ii)(Cyclic Test For BWR Type) |
- |
1000 |
|
- |
| As per Clause 7.3.2 Table 1(iii)(Cyclic Test For MR Type) |
- |
1000 |
|
- |
| As per Clause 7.4(Acidity And Alkalinity (pH)) |
- |
2000 |
|
- |
| As per Clause 9(Marking) |
- |
1000 |
|
- |
|
23 May, 2028 |
-
Included w.e.f. 10.12.2025 |
| 2418 |
BIS, Southern Regional Laboratory (SRL)
| None
| IS 4246 (2025) |
DOMESTIC GAS STOVE AND BUILT IN HOB FOR USE WITH LPG SPECIFICATION (Sixth Revision ) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 11.4 (Burners) |
- |
|
|
|
|
- |
-
` |
| 2419 |
Atckon Laboratories LLP, Bahadurgarh
| 8186436
| IS 11329 (2018) |
Finned type heat exchanger for room air conditioner (First Revision) |
All |
210000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4(CLASSIFICATION AND NOMENCLATURE) |
- |
1000 |
|
- |
| 5(MATERIALS) |
- |
2500 |
|
- |
| 6(QUALITY REQUIREMENTS) |
- |
5000 |
|
- |
| 7(TESTING) |
- |
200000 |
|
- |
| 7.1("Permissible Assembly Contamination
Specification") |
- |
50000 |
|
- |
| 7.1.1(Internal Contamination) |
- |
50000 |
|
- |
| 7.2(Pressure Test for Assembly Tightness) |
- |
50000 |
|
- |
| 7.2.1(Water Leak Test) |
- |
50000 |
|
- |
| 7.2.2(Helium Leak Test) |
- |
50000 |
|
- |
| 7.2.3(Vacuum Leak Test Process) |
- |
50000 |
|
- |
| 7.3(Test for Mechanical Strength) |
- |
50000 |
|
- |
| 7.3.1(Burst Test) |
- |
50000 |
|
- |
| 7.3.2(Fatigue Strength Test) |
- |
50000 |
|
- |
| 7.4(Test for Corrosion Resistance) |
- |
50000 |
|
- |
| 8(MARKING) |
- |
1500 |
|
- |
| 9() |
- |
0 |
|
- |
| 7.1.2(Moisture content) |
- |
50000 |
|
- |
| 4.1.1(Fin Pack with Collar and Tube Type) |
- |
0 |
|
- |
| 4.1.1.2(Copper inner groove/micro groove tube and aluminium fin) |
- |
0 |
|
- |
| 4.1.1.4(Enhanced fin surfaces) |
- |
0 |
|
- |
| 4.1.2(Micro Channel Aluminium Tube and Aluminium fin heat exchanger(MCHE)) |
- |
0 |
|
- |
| 5.1(Tube Material) |
- |
0 |
|
- |
| 5.1 a(Copper Tube) |
- |
0 |
|
- |
| 5.2 a(Fin Material) |
- |
0 |
|
- |
| 5.2 b(Fin Material) |
- |
0 |
|
- |
| 5.3 a(Tube Sheet /End Plate) |
- |
0 |
|
- |
| 5.3 b(Tube Sheet /End Plate) |
- |
0 |
|
- |
| 6.1(Workmanship) |
- |
0 |
|
- |
| 6.2.1.1(Hairpin tube) |
- |
0 |
|
- |
| 6.2.1.2(Fin forming) |
- |
0 |
|
- |
| 6.2.1.3(Tube sheet/End plate) |
- |
0 |
|
- |
| 6.2.1.4(Expanded fin tightness) |
- |
0 |
|
- |
| 6.2.1.5(Brazing material selection) |
- |
0 |
|
- |
| 6.2.1.6(Brazing joint) |
- |
0 |
|
- |
| 6.2.3(Heat Exchanger Assembly) |
- |
0 |
|
- |
| 7.2.2.1(Chamber test method) |
- |
0 |
|
- |
| 7.4.5.2(Test requirement) |
- |
0 |
|
- |
| 7.4.5.2 a(Test requirement) |
- |
0 |
|
- |
| 8.1(Marking of Finned Type Heat Exchanger) |
- |
0 |
|
- |
| 9.1(Type Test) |
- |
0 |
|
- |
| 9.2(Routine Tests) |
- |
0 |
|
- |
|
- |
-
Included w.e.f. 29.10.2025 |
| 2420 |
WELL TECH TEST AND RESEARCH CENTER, DERABASSI
| 9177306
| IS 1328 (2025) |
Veneered Decorative Plywood - Specification ( Fourth Revision ) |
MR/BWR/BWP, TYPE 1,2,3 & 4, FORMALDEHYDE CLASS E1 & E2 |
7500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 4.1(Grades) |
- |
500 |
|
- |
| Cl 4.2(Type) |
- |
500 |
|
- |
| Cl 4.3(Formaldehyde Class) |
- |
2000 |
|
- |
| Cl 5.2(Adhesive) |
- |
1500 |
|
- |
| Cl 7.1(Surface Requirements- For Type 1) |
- |
1000 |
|
- |
| Cl 7.2(Surface Requirements- For Type 2) |
- |
1000 |
|
- |
| Cl 7.3(Surface Requirements- For Type 3) |
- |
1000 |
|
- |
| Cl 7.4(Surface Requirements- For Type 4) |
- |
1000 |
|
- |
| Cl 8.1(Dimensions (Length and Width)) |
- |
2000 |
|
- |
| Cl 8.2(Dimensions (Thickness)) |
- |
1000 |
|
- |
| Cl 8.3(Squareness and Edge Straightness as Per Annex B) |
- |
1500 |
|
- |
| Cl 8.4- Table 1(Tolerances) |
- |
500 |
|
- |
| Cl 11.3(Moisture Content) |
- |
2000 |
|
- |
| Cl 11.4.1(a)(Water Resistance Test( For MR Grade)) |
- |
2000 |
|
- |
| Cl 11.4.1(b)(Water Resistance Test( For BWR Grade)) |
- |
2000 |
|
- |
| Cl 11.4.1(c)(Water Resistance Test( For BWP Grade)) |
- |
2000 |
|
- |
| Cl 11.5(Formaldehyde Content Test) |
- |
2500 |
|
- |
| Cl 12(Marking) |
- |
500 |
|
- |
|
30 Mar, 2027 |
-
Included w.e.f. 04.11.2025 |
| 2421 |
ALAIPURIA TEST HOUSE PRIVATE LIMITED, GHAZIABAD
| 8180426
| IS 398 : Part 2 (2025) |
Aluminium Conductor for Overhead Transmission Purposes - Specification Part 2 Aluminium Conductors Galvanized Steel Reinforced (Fourth Revision) |
---- |
10000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl-6(Material) |
- |
100 |
|
Rs 10000 (up to 80 Sq.mm), Rs 18000 (100 SQ.MM), Rs 37000 (Above 100 SQ.MM and upto Including 200 SQ.MM), Rs 55000 (above 200 SQ.MM) |
| Cl-6.1.1(chemical composition of high carbon steel) |
- |
100 |
|
- |
| Cl-6.2(zinc used for galvanizing) |
- |
100 |
|
- |
| Cl-7(Freedom From Defects) |
- |
100 |
|
- |
| Cl-8.1(Wires-Nominal Sizes) |
- |
100 |
|
- |
| Cl-8.2(Aluminum Conductors, Galvanized Steel- Reinforced) |
- |
200 |
|
- |
| Cl-9.1(Joint in Wires) |
- |
100 |
|
- |
| Cl-9.2(Aluminium Wires) |
- |
100 |
|
- |
| Cl-9.3(Galvanized Steel Wires) |
- |
100 |
|
- |
| Cl-10.2(Lay Ratio of Aluminium Conductors Galvanized Steel-Reinforced) |
- |
250 |
|
- |
| Cl-13.3(Conductor- Visual examination) |
- |
100 |
|
- |
| Cl- 13.5(Conductor- Measurement of lay ratio/direction of lay) |
- |
500 |
|
- |
| Cl- 13.12(Conductor- d.c. Resistance test on stranded conductor) |
- |
1000 |
|
- |
| Cl- 13.14(Conductor- Ultimate tensile strength test on stranded conductor) |
- |
2500 |
|
- |
| Cl-13.4(Aluminium wires-Measurement of diameter) |
- |
500 |
|
- |
| Cl- 13.6(Aluminium wires -Breaking load test) |
- |
1000 |
|
- |
| Cl- 13.8(Aluminium wires- Wrapping test) |
- |
250 |
|
- |
| Cl- 13.9(Aluminium wires- d.c. resistance test) |
- |
500 |
|
- |
| Cl- 13.11(Aluminium wires Procedure qualification test on welded joint of aluminium strands) |
- |
200 |
|
- |
| Cl- 13.4(Steel wires- Measurement of diameter) |
- |
200 |
|
- |
| Cl- 13.6(Steel wires- Breaking load test) |
- |
1000 |
|
- |
| Cl- 13.7(Steel wires- Ductility test) |
- |
200 |
|
- |
| Cl- 13.8(Steel wires- Wrapping test) |
- |
250 |
|
- |
| Cl- 13.10(Steel wires- Galvanizing test) |
- |
500 |
|
- |
| Cl-13.7.1(Torsion Test) |
- |
500 |
|
- |
| Cl-13.7.2(Elongation Test) |
- |
500 |
|
- |
| Cl-11.1(Standard Length) |
- |
200 |
|
- |
| Cl-11.2(Random Lengths) |
- |
200 |
|
- |
| Cl- 13.13(Conductor- Surface condition test on stranded conductor) |
- |
2500 |
|
- |
|
03 Oct, 2027 |
-
Included w.e.f 31.12.2025
Exclusion: Cl- 13.15 (Conductor- Corona test (for conductors intended for use at 400 kV and above voltage level for a.c. and ± 320 kV and above voltage level for d.c.)), Cl-13.16 (Conductor- Radio interference voltage test) |
| 2422 |
IndianOil Corporation Limited (IOCL), Haldia Smart Laboratory, Haldia
| 5196314
| IS 1593 (2018) |
Fuel oils - Specification (Third Revision) |
- |
12720.00 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.2(Pour Point) |
- |
1900.00 |
|
Testing charges applicable for FY 2025-2026. Annual enhancement @ 5%. GST applicable @ 18%. |
| 4.6-Table 1-v)(Density at 15°C kg/m3or Relative density at 15.6/15.6°C) |
- |
1130.00 |
|
Testing charges applicable for FY 2025-2026. Annual enhancement @ 5%. GST applicable @ 18%. |
| 4.6-Table 1-vi)(Flash point (Pensky Martens (closed), °C, Min) |
- |
1900.00 |
|
Testing charges applicable for FY 2025-2026. Annual enhancement @ 5%. GST applicable @ 18%. |
| 4.6-Table 1-vii)(Kinematic viscosity in centistokes at 50°C) |
- |
2270.00 |
|
Testing charges applicable for FY 2025-2026. Annual enhancement @ 5%. GST applicable @ 18%. |
| 4.6-Table 1-x)(Water content, percent by volume, Max) |
- |
1130.00 |
|
Testing charges applicable for FY 2025-2026. Annual enhancement @ 5%. GST applicable @ 18%. |
| 4.6-Table 1-viii)(Sediment, percent by mass, Max) |
- |
1740.00 |
|
Testing charges applicable for FY 2025-2026. Annual enhancement @ 5%. GST applicable @ 18%. |
| 4.6-Table 1-ix)(Sulphur, total, percent by mass, Max2)) |
- |
2650.00 |
|
Testing charges applicable for FY 2025-2026. Annual enhancement @ 5%. GST applicable @ 18%. |
|
29 Jan, 2029 |
-
Excluding: 4.1 (General) 4.3 (Asphaltene Content) 4.4 (TOTAL SEDIMENT) 4.5 (Spot Test) 4.6-Table 1-i) (Acidity, inorganic) 4.6-Table 1-ii) (Ash, percent by mass, Max) 4.6-Table 1-iii) (Carbon residue, mass percent, Max) 4.6-Table 1-iv) (Gross, calorific value) 5.1 (Packing) 5.2 (Marking) |
| 2423 |
BIS, Central Laboratory (CL)
| None
| IS 14166 (2024) |
Respiratory protective devices full - Face masks - Specification (First Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl-5.1 (Nominal Values and Tolerances) |
- |
|
|
|
| Cl-5.2 (Materials) |
- |
|
|
|
| Cl-5.3 (Cleaning and Disinfecting) |
- |
|
|
|
| Cl-5.4 (Finish of Parts) |
- |
|
|
|
| Cl-5.5.1 (Mechanical damage) |
- |
|
|
|
| Cl-5.5.2 (Speech diaphragm) |
- |
|
|
|
| Cl-5.5.3 (Tensile force) |
- |
|
|
|
| Cl-5.5.4 (Thermal radiation test) |
- |
|
|
|
| Cl-5.6 (Replaceable Components) |
- |
|
|
|
| Cl-5.7 (Practical Performance) |
- |
|
|
|
| Cl-5.8 (Resistance to Temperature) |
- |
|
|
|
| Cl-5.9.1 (Leakage) |
- |
|
|
|
| Cl-5.9.2 (Compatibility with Skin) |
- |
|
|
|
| Cl-5.10 (Flammability) |
- |
|
|
|
| Cl-5.11 (Resistance to Thermal Radiation) |
- |
|
|
|
| Cl-5.12 (Inward Leakage of Facepiece) |
- |
|
|
|
| Cl-5.13 (Carbon Dioxide Content of the Inhalation Air) |
- |
|
|
|
| Cl-5.14 (Head Harness) |
- |
|
|
|
| Cl-5.14.3.1 (The head harness shall withstand a pull of 100 N) |
- |
|
|
|
| Cl-5.14.3.2 (The head harness shall withstand a pull of 150 N) |
- |
|
|
|
| Cl-5.14.3.3 (Pull of 50 N) |
- |
|
|
|
| Cl-5.15 (Facepiece Connector) |
- |
|
|
|
| Cl-5.15.3 (Strength of Connectors) |
- |
|
|
|
| Cl-5.16.1 (Eyepieces/visors and anti-mist discs) |
- |
|
|
|
| Cl-5.16.3 (Field of vision) |
- |
|
|
|
| Cl-5.16.5 (Impact resistance) |
- |
|
|
|
| Cl-5.17 (Inhalation and Exhalation Valves) |
- |
|
|
|
| Cl-5.17.1 (Inhalation Valves) |
- |
|
|
|
| Cl-5.17.2 (Exhalation Valves) |
- |
|
|
|
| Cl-5.17.3 (Tensile Force) |
- |
|
|
|
| Cl-5.18.1, Table-1 (Inhalation Resistance, mbar) |
- |
|
|
|
| Cl-5.18.1, Table-1 (Exhalation Resistance, mbar) |
- |
|
|
|
| Cl-5.18.2, Table-2 (Inhalation Resistance, mbar) |
- |
|
|
|
| Cl-5.18.2, Table-2 (Exhalation Resistance, mbar) |
- |
|
|
|
| Cl-6 (Test Methods) |
- |
|
|
|
| Cl-7 (Marking) |
- |
|
|
|
|
- |
-
- |
| 2424 |
BIS, Central Laboratory (CL)
| None
| IS 11569 (2023) |
Specification for Cervical Collar (First Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl-3.1 (Material) |
- |
|
|
|
| Cl-3.2 (Sewing Thread) |
- |
|
|
|
| Cl-3.3 (Eyelets) |
- |
|
|
|
| Cl-3.3 (Granules polypropylene) |
- |
|
|
|
| Cl-3.4 (Filling Material) |
- |
|
|
|
| Cl-3.5 (Fasteners, Hook and Loop Tape) |
- |
|
|
|
| Cl-3.6 (Reinforcement Material) |
- |
|
|
|
| Cl-4.1 (Dimensions) |
- |
|
|
|
| Cl-4.2 (Tolerance) |
- |
|
|
|
| Cl-5 (Workmanship and finish) |
- |
|
|
|
| Cl-7 (Marking) |
- |
|
|
|
|
- |
-
- |
| 2425 |
BIS, Central Laboratory (CL)
| None
| IS 8749 (2024) |
Biogas Stove â Specification (Third Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl-5.1 (Fittings and materials) |
- |
|
|
|
| Cl-5.1.1 (Plastic components) |
- |
|
|
|
| Cl-5.2 (stove or parts) |
- |
|
|
|
| Cl-5.3 (Mercurous nitrate test) |
- |
|
|
|
| Cl-5.4 (Body of the burner) |
- |
|
|
|
| Cl-5.5 (i) (Body) |
- |
|
|
|
| Cl-5.5 (ii) (Plug, nuts, and screws) |
- |
|
|
|
| Cl-5.5 (iii) (Pins) |
- |
|
|
|
| Cl-5.5 (iv) (Springs) |
- |
|
|
|
| Cl-5.5 (v) (Washers) |
- |
|
|
|
|
- |
-
Exclusion "-; 8.11 Gas taps, (Cl.17) -GAS CONSUMPTION,(Cl.18)-IGNITION AND FLAME TRAVEL, (Cl.19)
- FLAME STABILITY
, (Cl.20)
- NOISE CONTROL, (Cl.21)
- FORMATION OF SOOT, (Cl.22)
- FLASH BACK
, (Cl.23)
- COMBUSTION, (Cl.24) a) - SURFACE TEMPERATURE,(Cl.25)
-THERMAL EFFICIENCY," |
| 2426 |
BIS, Central Laboratory (CL)
| None
| IS 3623 (2024) |
GUIDE AND RUBBING ROPES â SPECIFICATION (Second Revision ) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl-4.1 (Size) |
- |
|
|
|
| Cl-4.2 (Length) |
- |
|
|
|
| Cl-5.1 (Material) |
- |
|
|
|
| Cl-5.2 (Tensile strength) |
- |
|
|
|
| Cl-5.3 (Rod or wire) |
- |
|
|
|
| Cl-6 (Breaking load and mass) |
- |
|
|
|
| Cl-7 (Construction) |
- |
|
|
|
| Cl-8.1 (Workmanship) |
- |
|
|
|
| Cl-8.2 (Joints) |
- |
|
|
|
| Cl-8.3 (Lubrication) |
- |
|
|
|
| Cl-9.1 (Round Wire/Rod Ropes) |
- |
|
|
|
| Guide and Rubbing Ropes —Specification (Locked Coil Ropes) |
- |
|
|
|
| Cl-5.1 (Material) |
- |
|
|
|
| Cl-9.2.2 (Reverse Bend Test) |
- |
|
|
|
| Cl-10.1 (completed wire ropes and wires) |
- |
|
|
|
| Cl-10.2 (Test on Wires from the Completed Rope) |
- |
|
|
|
| Cl-10.3 (Breaking Load Test) |
- |
|
|
|
| Cl-13 (Marking) |
- |
|
|
|
|
- |
-
- |
| 2427 |
BIS, Central Laboratory (CL)
| None
| IS 3745 (2024) |
Yoke Type Medical Cylinder Valve with Pin Index Connection ( Third Revision ) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl-3.1 (Chemical Composition- Metallic and non-metallic materials) |
- |
|
|
|
| Cl-3.2.1 (Tensile Strength and Elongation) |
- |
|
|
|
| Cl-3.2.2 (Izod Impact Strength) |
- |
|
|
|
| Cl-3.4 (Protective Finishes) |
- |
|
|
|
| Cl-4 (Design) |
- |
|
|
|
| Cl-4.1 (Design Criteria-Valve) |
- |
|
|
|
| Cl-5.1 (Design Criteria of Pressure Relief Devices) |
- |
|
|
|
| Cl-5.2 (Relief/Bursting Pressure) |
- |
|
|
|
| Cl-6.1 (Cylinder Valve) |
- |
|
|
|
| Cl-6.2 (Yoke) |
- |
|
|
|
| Cl-9.1 (Dimensions - Outlet Connection for Oxygen) |
- |
|
|
|
| Cl-9.2 (Dimensions - Outlet Connection for Oxygen/Carbon Dioxide Mixtures (Carbon Dioxides ≤ 7 percent) |
- |
|
|
|
| Cl-9.3 (Dimensions - Outlet Connection for Oxygen/Helium Mixtures (Helium ≤ 80 percent) |
- |
|
|
|
| Cl-9.4 (Dimensions - Outlet Connection for Ethylene) |
- |
|
|
|
| Cl-9.5 (Dimensions - Outlet Connection for Nitrous Oxide) |
- |
|
|
|
| Cl-9.6 (Dimensions - Outlet Connection for Cyclo-Propane) |
- |
|
|
|
| Cl-9.7 (Dimensions - Outlet Connection for Helium/Oxygen Mixtures (Oxygen ≤ 20 percent) |
- |
|
|
|
| Cl-9.8 (Dimensions - Outlet Connection for Carbon Dioxide/Oxygen Mixtures (Carbon Dioxide ≥ 7 percent) |
- |
|
|
|
| Cl-9.9 (Dimensions - Outlet Connection for Medical Air) |
- |
|
|
|
| Cl-9.10 (Dimensions - Outlet Connection for Special Mixtures of 50 percent Nitrous Oxide and 50 percent Oxygen) |
- |
|
|
|
| Cl-9.11 (Dimensions - Outlet Connection for Nitrogen) |
- |
|
|
|
| Cl-10 (INLET THREADS) |
- |
|
|
|
| Cl-11 (HYDRAULIC BURST PRESSURE TEST) |
- |
|
|
|
| Cl-12 (INTERNAL AND EXTERNAL TIGHTNESS TEST) |
- |
|
|
|
| Cl-13 (VALVING TORQUE TEST) |
- |
|
|
|
| Cl-14 (ENDURANCE TEST) |
- |
|
|
|
| Cl-15 (MARKING) |
- |
|
|
|
| Cl-7 (Basic dimensions for yoke type valve connections) |
- |
|
|
|
| Cl-8 (Alternative Designs of Yoke Type Valve Connections) |
- |
|
|
|
|
- |
-
- |
| 2428 |
BIS, Central Laboratory (CL)
| None
| IS 9471 : Part 7 (2024) |
Modular Lower Limb Orthotic Components â Specification Part 7 Orthotic Joint Bars, Ankle and Knee (Upper and Lower) (First Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl-4 (SHAPE AND DIMENSIONS) |
- |
|
|
|
| Cl-5 (MATERIAL) |
- |
|
|
|
| Cl-6 (WORKMANSHIP AND FINISH) |
- |
|
|
|
| Cl-7 (BEND TEST) |
- |
|
|
|
| Cl-8 (MARKING) |
- |
|
|
|
|
- |
-
- |
| 2429 |
BIS, Central Laboratory (CL)
| None
| IS 9471 : Part 6 (2024) |
Modular Lower Limb Orthotic Components â Specification Part 6 Orthotic Hip Joint (Joint Unit, Hip Drop Lock) (First Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl-4.1 (Joint Body Upper) |
- |
|
|
|
| Cl-4.2 (Joint Hip Lower) |
- |
|
|
|
| Cl-4.3 (Lock Drop Ring) |
- |
|
|
|
| Cl-4.4 (Screw) |
- |
|
|
|
| Cl-4.5 (Nut) |
- |
|
|
|
| Cl-5 (WORKMANSHIP AND FINISH) |
- |
|
|
|
| Cl-6 (FUNCTIONAL REQUIREMENTS) |
- |
|
|
|
| Cl-7 (BEND TEST) |
- |
|
|
|
| Cl-8 (MARKING) |
- |
|
|
|
|
- |
-
- |
| 2430 |
BIS, Central Laboratory (CL)
| None
| IS 9471 : Part 4 (2024) |
Modular Lower Limb Orthotic Components â Specification Part 4 Joint Unit, Ankle (First Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl-4 (SHAPE AND DIMENSIONS) |
- |
|
|
|
| Cl-4.4 (Depth of Slot) |
- |
|
|
|
| Cl-5.1 (strength heat) |
- |
|
|
|
| Cl-5.2 (screws) |
- |
|
|
|
| Cl-5.3 (steel annealed bars) |
- |
|
|
|
| Cl-5.4 (steel) |
- |
|
|
|
| Cl-5.5 (spring) |
- |
|
|
|
| Cl-6 (WORKMANSHIP AND FINISH) |
- |
|
|
|
| Cl-7 (HEAT TREATMENT) |
- |
|
|
|
| Cl-8 (Marking) |
- |
|
|
|
|
- |
-
- |
