BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

14028 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

2371

AA Electro Magnetic Laboratory Pvt Ltd, Gurugram

8165826

IS 13450 : Part 2 : Sec 40 (2020)

Medical Electrical Equipment Part 2 Particular Requirements for the Basic Safety and Essential Performance Section 40 Electromyographs and evoked response equipment

1360000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
201.4(General requirements)	-	30000	-
201.5(General requirements for testing of ME EQUIPMENT)	-	35000	-
201.6(Classification of ME EQUIPMENT and ME SYSTEMS)	-	25000	-
201.7(ME EQUIPMENT identification, marking and documents)	-	25000	-
201.8(Protection against electrical HAZARDS from ME EQUIPMENT)	-	45000	-
201.9(Protection against MECHANICAL HAZARDS of ME EQUIPMENT and ME SYSTEMS)	-	45000	-
201.1(Protection against unwanted and excessive radiation HAZARDS)	-	45000	-
201.11(Protection against excessive temperatures and other HAZARDS)	-	35000	-
201.12(Accuracy of controls and instruments and protection against hazardous outputs)	-	35000	-
201.13(HAZARDOUS SITUATIONS and fault conditions for ME EQUIPMENT)	-	35000	-
201.14(PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS (PEMS))	-	45000	-
201.15(Construction of ME EQUIPMENT)	-	35000	-
201.16(ME SYSTEMS)	-	25000	-
201.17(ELECTROMAGNETIC COMPATIBILITY of ME EQUIPMENT and ME SYSTEMS)	-	450000	-
202(ELECTROMAGNETIC DISTURBANCES – Requirements and tests)	-	450000	-

24 Sep, 2026

-
Included w.e.f. 28.07.2025

2372

BIS, Eastern Regional Laboratory (ERL)

None

IS 2041 (2024)

Steel Plates and Strips for Pressure Vessels Used at Moderate and Low Temperature â Specification (Fourth Revision)

All grades and sizes except for the tests mentioned in remarks

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-9 (FREEDOM FROM DEFECTS)	-
Cl-9.3 (Edge Imperfection)	-
Cl-10 (width ( average of 3))	-
Cl-11 (THEORETICAL MASS)	-
Cl-12.1.6 (Tensile Test Result)	-
Cl-12.2 (Bend Test)	-
Cl-12.3.1 (Charpy impact test)	-
Cl-7.1, Table-1 (C)	-
Cl-7.1, Table-1 (S Max)	-
Cl-7.1, Table-1 (P max)	-
Cl-7.1, Table-1 (Mn Max)	-
Cl-7.1, Table-1 (Si)	-
Cl-7.1, Table-1 (N Max)	-
Cl-7.1, Table-1 (Ni Max)	-
Cl-7.1, Table-1 (Cr Max)	-
Cl-7.1, Table-1 (Cu Max)	-
Cl-7.1, Table-1 (Mo Max)	-
Cl-10 (width ( average of 3))	-
CL 10 (Thickness ( average 10 ))	-

-
Mech: Except Impact test at -40 and ultrasonic test

2373

Sleen India Biz venture Private Limited, Agra

9139736

IS 12069 (2023)

Coconut Fatty Acids - Specification (first revision of IS 12069)

Grade-1 and Grade-2

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Description)	-	250	-
4.2(Description)	-	250	-
4.3 Table 1 (i)(Moisture)	-	500	-
4.3 Table 1 (ii)(Saponification value)	-	1000	-
4.3 Table 1 (iii)(Acid value differ from Saponification value)	-	1000	-
4.3 Table 1 (iv)(Iodine value)	-	1500	-
4.3 Table 1 (v)(Mineral acidity)	-	1000	-
4.3 Table 1 (vi)(Ash,)	-	500	-
4.3 Table 1 (vii)(Unsaponifiable matter)	-	1000	-
4.3 Table 1 (viii)(Titre,)	-	1500	-
4.3 Table 1 (ix)(Flash point)	-	1000	-
4.4 Table 2 (i)(C6 : 0)	-	5000	Complete test price for Fatty Acid Cl. 4.4, Table 2 is 5000/-.
4.4 Table 2 (ii)(C8 : 0)	-	0	Complete test price for Fatty Acid Cl. 4.4, Table 2 is 5000/-.
4.4 Table 2 (iii)(C10 : 0)	-	0	Complete test price for Fatty Acid Cl. 4.4, Table 2 is 5000/-.
4.4 Table 2 (iv)(C12 : 0)	-	0	Complete test price for Fatty Acid Cl. 4.4, Table 2 is 5000/-.
4.4Table 2 (v)(C14 : 0)	-	0	Complete test price for Fatty Acid Cl. 4.4, Table 2 is 5000/-.
4.4Table 2 (vi)(C16 : 0)	-	0	Complete test price for Fatty Acid Cl. 4.4, Table 2 is 5000/-.
4.4Table 2 (vii)(C16 :1)	-	0	Complete test price for Fatty Acid Cl. 4.4, Table 2 is 5000/-.
4.4Table 2 (viii)(C17 : 0)	-	0	Complete test price for Fatty Acid Cl. 4.4, Table 2 is 5000/-.
4.4Table 2 (ix)(C17 : 1)	-	0	Complete test price for Fatty Acid Cl. 4.4, Table 2 is 5000/-.
4.4Table 2 (x)(C18 : 0)	-	0	Complete test price for Fatty Acid Cl. 4.4, Table 2 is 5000/-.
4.4Table 2 (xi)(C18 : 1)	-	0	Complete test price for Fatty Acid Cl. 4.4, Table 2 is 5000/-.
4.4Table 2 (xii)(C18 : 2)	-	0	Complete test price for Fatty Acid Cl. 4.4, Table 2 is 5000/-.
4.4Table 2 (xiii)(C18 : 3)	-	0	Complete test price for Fatty Acid Cl. 4.4, Table 2 is 5000/-.
4.4Table 2 (xiv)(C20 : 0)	-	0	Complete test price for Fatty Acid Cl. 4.4, Table 2 is 5000/-.
4.4Table 2 (xv)(C20 : 1)	-	0	Complete test price for Fatty Acid Cl. 4.4, Table 2 is 5000/-.
4.4Table 2 (xvi)(C20 : 2)	-	0	Complete test price for Fatty Acid Cl. 4.4, Table 2 is 5000/-.
4.4Table 2 (xvii)(C22 : 0)	-	0	Complete test price for Fatty Acid Cl. 4.4, Table 2 is 5000/-.
4.4Table 2 (xviii)(C22 : 1)	-	0	Complete test price for Fatty Acid Cl. 4.4, Table 2 is 5000/-.
4.4Table 2 (xix)(C22 : 2)	-	0	Complete test price for Fatty Acid Cl. 4.4, Table 2 is 5000/-.
4.4Table 2 (xx)(C24 : 0)	-	0	Complete test price for Fatty Acid Cl. 4.4, Table 2 is 5000/-.
4.4Table 2 (xxi)(C24 : 1)	-	0	Complete test price for Fatty Acid Cl. 4.4, Table 2 is 5000/-.
4.3 Table 1 (ix)(Colour,)	-	500	-

15 May, 2027

-
Included w.e.f.23.07.2025

2374

CIPET, Lucknow

9102534

IS 14611 (2024)

Multilayered Cross Laminated Sheets/Tarpaulins/Covers/Agricultural Films â Specification (Second Revision)

36111 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-6.1(Workmanship)	-	500	-
Cl-6.2, 6.3 & 6.8, Table-1 (i)(Mass per unit area, g/m²)	-	500	-
Cl-6.2, 6.3 & 6.8, Table-1 (ii)("Tensile strength1), Min,kg/cm²- (a) Longitudinal direction")	-	1300	-
Cl-6.2, 6.3 & 6.8, Table-1 (ii)("Tensile strength1), Min,kg/cm² (b) Transverse direction")	-	1300	-
Cl-6.2, 6.3 & 6.8, Table-1 (iii)("After ageing at 70 ºC ± 1 ºC for 168 h, Max, kg/cm2 a)Longitudinaldirection")	-	1300	-
Cl-6.2, 6.3 & 6.8, Table-1 (iii)("After ageing at 70 ºC ± 1 ºC for 168 h, Max, kg/cm2 b) Transverse direction")	-	1300	-
Cl-6.2, 6.3 & 6.8, Table-1 (iv)("Elongation at break, Min, percent a)Longitudinaldirection")	-	0	-
Cl-6.2, 6.3 & 6.8, Table-1 (iv)("Elongation at break, Min, percent b) Transverse direction")	-	0	-
Cl-6.2, 6.3 & 6.8, Table-1 (v)("Tear strength, Min, g: a)Longitudinaldirection")	-	1300	-
Cl-6.2, 6.3 & 6.8, Table-1 (v)("Tear strength, Min, g: b)Transverse direction")	-	1300	-
Cl-6.2, 6.3 & 6.8, Table-1 (vi)(Dart impact strength, Min, g)	-	850	-
Cl-6.2, 6.3 & 6.8, Table-1 (vii)(Average tensile strengthand elongation at breakafter exposing to UVradiation and weathering,Min, (kgf))	-	1300	-
Cl-6.4(Water Proofness Test)	-	1000	-
Cl-6.5(Strength of Joints/Seams)	-	1100	-
Cl-6.6(Flex Test)	-	3000	-
Cl-6.7(Ease of In-Situ Repair)	-	5000	-
Cl-7(Fixing of Eyelets (for tarpaulins only))	-	500	-
Cl-9(Packing and Marking)	-	500	-
Cl-6.3(Accelerated Ageing Test)	-	4200	-
Cl-5(Construction of sheets/tarpaulins/covers/agricultural films)	-	500	-

31 Dec, 2026

-
Included w.e.f 09.07.2025

2375

Sleen India Biz venture Private Limited, Agra

9139736

IS 12068 (1987)

Specification for rice bran fatty acids

12300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1/3.1.1/3.2(Description - IS 12068:1987)	-	500	-
3.3, 6.1 Table 1 (i)(Moisture - IS 548 (Part 1/Sec 2) : 2021)	-	1000	-
3.3, 6.1 Table 1 (ii)(Saponification - IS 548 (Part 1/Sec 2) : 2021)	-	1300	-
3.3, 6.1 Table 1 (iii)(Acid value - IS 548 (Part 1/Sec 2) : 2021)	-	1000	-
3.3, 6.1 Table 1 (iv)(Iodine Value - IS 548 (Part 1/Sec 2) : 2021)	-	2500	-
3.3, 6.1 Table 1 (v)(Mineral Acidity - IS 12068:1987)	-	1000	-
3.3, 6.1 Table 1 (vi)(Ash - IS 12068:1987)	-	500	-
3.3, 6.1 Table 1 (vii)(Unsaponifiable matter - IS 548 (Part 1/Sec 2) : 2021)	-	1000	-
3.3, 6.1 Table 1 (viii)(Titre - IS 548 (Part 1/Sec 2) : 2021)	-	2000	-
3.3, 6.1 Table 1 (ix)(Colour)	-	500	-
3.3, 6.1 Table 1 (x)(Flash Point - IS 1448 (P-21))	-	1000	-

15 May, 2027

-
Included w.e.f.23.07.2025

2376

NATIONAL TEST HOUSE-ER (NTH), KOLKATA

5140804

IS 7283 (1992)

Hot - Rolled bars for the production of bright bars and machined parts for engineering applications specification (First Revision)

23500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5, 5.1, 5.2(Chemical Composition - Carbon)	-	500	-
5, 5.1, 5.2(Chemical Composition - Sulphur)	-	500	-
5, 5.1, 5.2(Chemical Composition - Phosphorus)	-	500	-
5, 5.1, 5.2(Chemical Composition - Manganese)	-	500	-
5, 5.1, 5.2(Chemical Composition - Silicon)	-	500	-
5, 5.1, 5.2(Chemical Composition - Nickel)	-	500	-
5, 5.1, 5.2(Copper)	-	500	-
5, 5.1, 5.2(Chromium)	-	500	-
Cl 6(Workmanship)	-	2000	-
7(Diameter & Out Of Round)	-	500	-
Cl 8(Decarburization)	-	2000	-
Cl 9(Inclusion)	-	4000	-
Cl 11(Size)	-	3000	-
Cl 10(Hardenability)	-	8000	-

14 Jun, 2027

-
-

2377

NATIONAL TEST HOUSE-ER (NTH), KOLKATA

5140804

IS 2830 (2012)

Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into steel for general structural purposes - Specification (Third Revision)

10500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Carbon %)	-	500	-
6.1(Manganese %)	-	500	-
6.1(Sulphur %)	-	500	-
6.1(Phosphorus %)	-	500	-
6.1( Copper %)	-	500	-
6.1( Ti)	-	500	-
6.1(V)	-	500	-
6.1(Mo)	-	500	-
6.1(Ni)	-	500	-
6.1(Cr)	-	500	-
10.1 (a)(Macro-examination)	-	1000	-
10.1 (b)(Sulphur print)	-	3000	-
Cl. 10.2(Bend)	-	500	-
Cl. 10.3(Camber)	-	500	-
Cl 11(Length, Width & Thickness)	-	500	-

14 Jun, 2027

-
-

2378

NATIONAL TEST HOUSE-ER (NTH), KOLKATA

5140804

IS 4923 (2017)

Hollow steel sections for structural use - Specification (Third Revision)

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Depth))	-	1500	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Weigth))	-	1000	-
Cl. 15.2, Table 3(Tensile Strength- IS 1608)	-	2000	-
Cl. 15.2, Table 3(Yield Strength- IS 1608)	-	500	-
Cl. 15.2, Table 3(Elongation- IS 1608)	-	500	-
Cl.7.1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl.7.1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl.7.1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl.7.1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl.7.1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl.7.1(Carbon Equivalent-IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Width))	-	500	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Thickness))	-	500	-
Cl. 10.1, 14.1, 18.1(Straightness)	-	500	-

14 Jun, 2027

-
-

2379

NATIONAL TEST HOUSE-ER (NTH), KOLKATA

5140804

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

Fe 415 to Fe 700, size 8mm-40mm

29500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 9.4(Rebend Test)	-	1000	-
Cl. 9.3, Table 4(Bend Test )	-	1000	-
Cl. 8.1 Table 3(Tensile Strength (TS))	-	1000	-
Cl. 7.2 Table -2 (Nominal Mass)	-	1000	-
Cl. 8.1 Table 3(Yield Stress (YS))	-	1000	-
Cl. 8.1 Table 3(Elongation, percentage)	-	1000	-
Clause 8.1(Table 3)(Total Elongation at Maximum Force)	-	1000	-
Cl. 4.3(Visual Inspection.)	-	1000	-
4.1(Carbon %)	-	1416	Inclusive of GST@18%
4.1(Sulphur %)	-	1416	Inclusive of GST@18%
4.1(Phosphorus %)	-	1416	Inclusive of GST@18%
4.1(Manganese %)	-	1416	Inclusive of GST@18%
4.1(Silicon %)	-	1416	Inclusive of GST@18%
4.1( Nitrogen%)	-	2360	Inclusive of GST@18%
4.1(CE)	-	2360	Inclusive of GST@18%
5.7(PullOut (Bond Test))	-	15000.00	Fee is dependent on size and exclusive of GST. Up to 12mm - Rs 10000.00 +GST Above 12mm - Rs 15000.00 +GST
Cl. 8.1 Table 3(TS/YS ratio)	-	1000	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Sulphur & Phosphorous)	-	500	-
Cl. 5 (Cl.5 Mean area of ribs/unit length (Ar), )	-	1000	-

14 Jun, 2027

-
-

2380

NATIONAL TEST HOUSE-ER (NTH), KOLKATA

5140804

IS 1285 (2023)

WROUGHT ALUMINIUM AND ALUMINIUM ALLOYS EXTRUDED ROUND TUBE AND HOLLOW SECTIONS FOR GENERAL ENGINEERINGPURPOSES SPECIFICATION

All Grade

10500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1("The extruded round tube and hollow sections shall be sound and visually free from harmful defects. ")	-	1000	-
8("Dimensions and tolerances of the material shall be as laid down in the Indian Standards indicated below: a) Extruded round tube IS 2673; and b) Extruded hollow sections IS 6477.")	-	1000	-
10(Tensile test)	-	3000	-
Cl.9.1(Aluminium- IS 504 and its parts or any other intrumental/chemical methods)	-	500	-
Cl.9.1(Copper- IS 504 and its parts or any other intrumental/chemical methods)	-	500	-
Cl.9.1(Magnesium- IS 504 and its parts or any other intrumental/chemical methods)	-	500	-
Cl.9.1(Silicon- IS 504 and its parts or any other intrumental/chemical methods)	-	500	-
Cl.9.1(Iron- IS 504 and its parts or any other intrumental/chemical methods)	-	500	-
Cl.9.1(Manganese- IS 504 and its parts or any other intrumental/chemical methods)	-	500	-
Cl.9.1(Zinc- IS 504 and its parts or any other intrumental/chemical methods)	-	500	-
Cl.9.1(Titanium and/ or other grain refining elements- IS 504 and its parts or any other intrumental/chemical methods)	-	500	-
Cl.9.1(Chromium- IS 504 and its parts or any other intrumental/chemical methods)	-	500	-
Cl.9.1(Remarks (Ti+V) - IS 504 and its parts or any other intrumental/chemical methods)	-	500	-
Cl.9.1(Remarks (Cr+Mn) - IS 504 and its parts or any other intrumental/chemical methods)	-	500	-
Cl.9.1(Remarks (Total Impurities)- IS 504 and its parts or any other intrumental/chemical methods)	-	500	-
6.2(Slight discoloration due to heat treatment, minor polishing marks and spiral marks due to roll straightening shall not be a cause for rejection.)	-	0	-
9(" Extruded round tubes and hollow sections shall be made from alloys specified in IS 733. 9.2 The chemical analysis of the material shall be carried out either in accordance with the methods specified in IS 504 (Part 1 to 12) and IS 504 (Part 13 to 16) or by any other established instrumental/chemical method. In case of any dispute the method specified in relevant parts of IS 504 shall be used as referee method. However, when the method is not given in IS 504, the referee method shall be as agreed to between the purchaser and the manufacturer. ")	-	0	-

14 Jun, 2027

-
-

2381

NATIONAL TEST HOUSE-ER (NTH), KOLKATA

5140804

IS 277 (2018)

Galvanized steel strips and sheets (Plain And Corrugated) - Specification (Seventh Revision)

GP TO GP 550

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8.1(UTM)	-	4000	-
Cl 8.2(Press)	-	1000	-
Cl 12(Workmanship)	-	1000	-
Cl 13(Weight)	-	1000	-
Cl 14(Length, Width & Thickness)	-	1000	-
Cl 10(Galvanising Test)	-	2000	-
Cl. 5.1(Carbon)	-	500	-
Cl. 5.1(Sulphur)	-	500	-
Cl. 5.1(Phosphorous)	-	500	-
Cl. 5.1(Manganese)	-	500	-
Cl. 5.1(Silicon)	-	500	-
Cl. 5.1(Titanium)	-	500	-
Cl-5.1(Aluminium)	-	500	-
Cl. 5.1(Copper)	-	500	-
Cl. 5.1(Vanadium)	-	500	-
Cl. 14 & Cl. 15(Depth of corrugation (average of 4))	-	250	-
Cl. 14 & Cl. 15(Pitch of corrugation (average of 4))	-	250	-
Cl. 14 & Cl. 15 (Cl. 14 & Cl 15 (Number of Corrugation))	-	0	-

14 Jun, 2027

-
-

2382

NATIONAL TEST HOUSE-ER (NTH), KOLKATA

5140804

IS 3975 (1999)

Low carbon galvanized steel wires, formed wires and tapes for armouring of cables - Specification (Third Revision)

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Dimensions)	-	1000	-
8.1(Mechanical Properties (as per table 5 of IS 1608))	-	3000	-
8.2(Mechanical Properties (as per IS 1717))	-	1000	-
8.3(Mechanical Properties (as per IS 1755))	-	1000	-
9.1(Galvanizing Requirements )	-	2000	-
9.2(Galvanizing Requirements )	-	1000	-
9.3(Galvanizing Requirements )	-	1000	-
11(Freedom from defects)	-	1000	-
6.2(Sulphur %)	-	500	-
6.2(Phosphorus %)	-	500	-
8.4(Mechanical Properties (as per IS 10810(Part- 42)))	-	3000	-

14 Jun, 2027

-
-

2383

NATIONAL TEST HOUSE-ER (NTH), KOLKATA

5140804

IS 2721 (2003)

Galvanized steel chain link fence fabric - Specification (Second Revision)

13000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6.1, 6.2, Table 1(Nominal Dia of Mesh wire)	-	1000	-
Cl.6.1, 6.2, Table 1(Mesh Size)	-	1000	-
Cl.6.3, Table 1(Width of the fabric)	-	1000	-
Cl.6.3, Table 1(Length of the fabric)	-	1000	-
Cl.9.1.1(Tensile test of mesh and line wires- IS 1608)	-	2000	-
Cl.9.1.2(Wrapping test of mesh and line wires-IS 1755)	-	1000	-
Cl.9.1.3(Twist test of mesh and line wires-IS 1717)	-	1000	-
Cl.9.1.4(Bend test of mesh and line wires- IS 1608)	-	1000	-
Cl.9.2(Line wire (Mass of zinc coating)- IS 6745)	-	2000	-
Cl.9.2(Line Wire (Uniformity of Zinc coating)-IS 2633)	-	1000	-
Cl.9.2(Mesh wire (Mass of zinc coating)- IS 6745)	-	2000	-
Cl.9.2(Mesh Wire (Uniformity of Zinc coating)-IS 2633)	-	1000	-
Cl.5(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl.5(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl.5(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl.5(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-

14 Jun, 2027

-
-

2384

NATIONAL TEST HOUSE-ER (NTH), KOLKATA

5140804

IS 738 (1994)

Wrought aluminium alloys, drawn tube for general engineering purposes - Specification (Third Revision)

All Grade

11500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.7, IS 2678(Wall Thickness at any point)	-	500	-
Cl.7, IS 2678(Mean Wall Thickness)	-	500	-
Cl. 9.1 Table 2(Tensile Strength- IS 2657)	-	2000	-
Cl. 9.1 Table 2(0.2 percent proof stress- IS 2657)	-	2000	-
Cl. 9.1 Table 2(Elongation on guage length of 50 mm)	-	1000	-
Cl. 6(Freedom from Defects- Cl.6)	-	1000	-
Cl. 8.1, Table 1(Aluminium- IS 504 : 1963 or 1S 11085 : 1984 or any other established instrumental/chemical method. )	-	500	-
Cl. 8.1, Table 1(Copper- IS 504 : 1963 or 1S 11085 : 1984 or any other established instrumental/chemical method. )	-	500	-
Cl. 8.1, Table 1(Magnesium- IS 504 : 1963 or 1S 11085 : 1984 or any other established instrumental/chemical method. )	-	500	-
Cl. 8.1, Table 1(Silicon- IS 504 : 1963 or 1S 11085 : 1984 or any other established instrumental/chemical method. )	-	500	-
Cl. 8.1, Table 1(Iron- IS 504 : 1963 or 1S 11085 : 1984 or any other established instrumental/chemical method. )	-	500	-
Cl. 8.1, Table 1(Manganese- IS 504 : 1963 or 1S 11085 : 1984 or any other established instrumental/chemical method. )	-	500	-
Cl. 8.1, Table 1(Zinc- IS 504 : 1963 or 1S 11085 : 1984 or any other established instrumental/chemical method. )	-	500	-
Cl. 8.1, Table 1(Titanium- IS 504 : 1963 or 1S 11085 : 1984 or any other established instrumental/chemical method. )	-	500	-
Cl. 8.1, Table 1(Chromium- IS 504 : 1963 or 1S 11085 : 1984 or any other established instrumental/chemical method. )	-	500	-

14 Jun, 2027

-
-

2385

NATIONAL TEST HOUSE-ER (NTH), KOLKATA

5140804

IS 733 (1983)

Specification for wrought aluminium and aluminium alloy bars, rods and sections (For General Engineering Purposes) (Third Revision)

All Grade as per Specification

11500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Dimension - IS 3965)	-	1000	-
Cl. 5.1, Table 2(Tensile Strength- IS 1816)	-	2000	-
Cl. 5.1, Table 2(0.2 Percent proof stress- IS 1816)	-	2000	-
Cl. 5.1, Table 2(Elongation on 50 mm or 5.65√So Gauge Length)	-	1000	-
Cl. 4(Freedom from Defects)	-	1000	-
Cl. 0.4, 5.1, Table 1(Copper- IS 504 or by any other suitable instrumental method)	-	500	-
Cl. 0.4, 5.1, Table 1(Magnesium- IS 504 or by any other suitable instrumental method)	-	500	-
Cl. 0.4, 5.1, Table 1(Silicon- IS 504 or by any other suitable instrumental method)	-	500	-
Cl. 0.4, 5.1, Table 1(Iron- IS 504 or by any other suitable instrumental method)	-	500	-
Cl. 0.4, 5.1, Table 1(Cr+ Mn- IS 504 or by any other suitable instrumental method)	-	1000	-
Cl. 0.4, 5.1, Table 1(Zinc- IS 504 or by any other suitable instrumental method)	-	500	-
Cl. 0.4, 5.1, Table 1(Titanium and / or other grain refining elements - IS 504 or by any other suitable instrumental method)	-	1000	-

14 Jun, 2027

-
-

2386

NATIONAL TEST HOUSE-ER (NTH), KOLKATA

5140804

IS 14543 (2024)

Packaged Drinking Water Other than Packaged Natural Mineral Water Specification Third Revision

21000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.3, Table-1 (i)(Colour, true colour units, Max)	-	150	-
Cl-5.3, Table-1 (ii)(Odour)	-	100	-
Cl-5.3, Table-1 (iii)(Taste)	-	100	-
Cl-5.3, Table-1 (iv)(Turbidity, nephelometric turbidity unit (NTU), Max)	-	150	-
Cl-5.3, Table-1 (v)(Total dissolved solids, mg/l, Max)	-	150	-
Cl-5.3, Table-1 (vi)(pH)	-	150	-
Cl-5.3, Table-2 (i)(Barium (as Ba))	-	275	-
Cl-5.3, Table-2 (ii)(Copper (as Cu))	-	275	-
Cl-5.3, Table-2 (iii)(Iron (as Fe))	-	275	-
Cl-5.3, Table-2 (iv)(Manganese (as Mn))	-	275	-
Cl-5.3, Table-2 (v)(Nitrate (as NO3 ))	-	300	-
Cl-5.3, Table-2 (vi)(Nitrite (as NO2 ))	-	300	-
Cl-5.3, Table-2 (vii)(Fluoride (as F))	-	300	-
Cl-5.3, Table-2 (viii)(Zinc (as Zn))	-	275	-
Cl-5.3, Table-2 (ix)(Silver (as Ag))	-	275	-
Cl-5.3, Table-2 (x)(Aluminium (as A1))	-	275	-
Cl-5.3, Table-2 (xi)(Chloride (as Cl))	-	150	-
Cl-5.3, Table-2 (xii)(Selenium (as Se))	-	275	-
Cl-5.3, Table-2 (xiii)(Sulphate (as SO4 ))	-	275	-
Cl-5.3, Table-2 (xiv)(Alkalinity (as HCO3 ))	-	150	-
Cl-5.3, Table-2 (xv)(Calcium (as Ca))	-	150	-
Cl-5.3, Table-2 (xvi)(Magnesium (as Mg))	-	150	-
Cl-5.3, Table-2 (xvii)(Sodium (as Na))	-	275	-
Cl-5.3, Table-2 (xviii)(Residual free chlorine)	-	300	-
Cl-5.3, Table-2 (xix)(Phenolic compounds (as C6H5OH))	-	300	-
Cl-5.3, Table-2 (xx)(Mineral oil)	-	300	-
Cl-5.3, Table-2 (xxi)(Anionic surface active agents)	-	300	-
Cl-5.3, Table-2 (xxii)(Sulphide)	-	300	-
Cl-5.3, Table-2 (xxiii)(Antimony (as Sb))	-	275	-
Cl-5.3, Table-2 (xxiv)(Borates (as B))	-	275	-
Cl-5.3, Table-2 (xxv)(Bromates (as BrO3 ))	-	500	-
Cl-5.3, Table-3 (i)(Mercury (as Hg))	-	300	-
Cl-5.3, Table-3 (ii)(Cadmium (as Cd))	-	300	-
Cl-5.3, Table-3 (iii)(Arsenic (as As))	-	300	-
Cl-5.3, Table-3 (iv)(Cyanide (as CN))	-	500	-
Cl-5.3, Table-3 (v)(Lead (as Pb))	-	300	-
Cl-5.3, Table-3 (vi)(Chromium (as Cr))	-	300	-
Cl-5.3, Table-3 (vii)(Nickel (as Ni))	-	300	-
Cl-5.3, Table-3 (viii)(Polychlorinated biphenyl (PCB))	-	500	-
Cl-5.3, Table-3 (ix)(Polynuclear aromatic hydrocarbons)	-	500	-
5.4/Annex D/i(P,P-DDT)	-	150	-
5.4/Annex D/ii(Lindane)	-	150	-
5.4/Annex D/iv(b-Endosulfan)	-	150	-
5.4/Annex D/xvi(Dieldrin)	-	150	-
5.4/Annex D/xvi(Aldrin)	-	150	-
5.4/Annex D/i(O,P-DDT)	-	150	-
5.4/Annex D/iv(a-Endosulfan)	-	150	-
5.4/Annex D/iii(d-HCH)	-	150	-
5.4/Annex D/i(O,P-DDD)	-	150	-
5.4/Annex D/i(P,P-DDE)	-	150	-
5.4/Annex D/i(O,P-DDE)	-	150	-
5.4/Annex D/iii(a-HCH)	-	150	-
5.4/Annex D/iii(β- HCH)	-	150	-
5.4/Annex D/iv(Endosulfan sulfate)	-	150	-
5.4/Annex D/i(P,P-DDD)	-	150	-
5.4/Annex D/xii(Alachlor)	-	150	-
5.4/Annex D/vii(Chlorpyrifos)	-	150	-
5.4/Annex D/x(Butachlor)	-	150	-
5.4/Annex D/vi(Ethion)	-	150	-
5.4/Annex D/xiv(Methyl parathion)	-	150	-
5.4/Annex D/xv(Malathion)	-	150	-
5.4/Annex D/viii(Phorate)	-	150	-
5.4/Annex D/v(Monochrotophos)	-	150	-
5.4/Annex D/xiii(Atrazine)	-	150	-
5.4/Annex D/viii(Phorate sulphoxide)	-	150	-
5.4/Annex D/viii(Phorate sulfone)	-	150	-
5.4/Annex D/xxvii(Methyl paraoxon)	-	150	-
5.4/Annex D/xxviii(Malaoxon)	-	150	-
5.4/Annex D/xi(Isoproturon)	-	150	-
5.4/Annex D/ix(2,4 –D)	-	150	-
Cl-5.2.1(Escherichia coli or thermotolerant bacteria)	-	400	-
Cl-5.2.2(Coliform)	-	400	-
Cl-5.2.3(Staphylococcus aureus)	-	400	-
Cl-5.2.4(Sulphite Reducing Anaerobes)	-	400	-
Cl-5.2.5(Pseudomonas Aeruginosa)	-	400	-
5.2.6(Aerobic Microbial Count @ 20 to 22 deg C)	-	0	-
Cl-5.2.7(Yeast and mould)	-	400	-
Cl-5.2.8(Salmonella)	-	400	-
Cl-5.2.9(Vibrio cholera)	-	400	-
Cl-5.4 (i)(Pesticide residues considered individually)	-	250	-
Cl-5.4 (ii)(Total pesticide residue)	-	250	-
5.3(Appearance)	-	100	-
Cl-5.2.3(Faecal streptococci)	-	400	-
Cl-5.2.8(shigella)	-	400	-
Cl-5.2.9(V.parahaemolyticus)	-	400	-
Cl-5.1(General Requirements)	-	200	-
Cl-5.2.6(Aerobic Microbial Count @ 37 deg C)	-	400	-

14 Jun, 2027

-
Exclusion: Cl-5.3, Table-4 (i) (Alpha emitters, Becquerel (Bq/l)), Cl-5.3, Table-4 (ii) (Beta emitters, Becquerel (Bq/l),) Cl-5.3, Table-3 (x) (Uranium)

2387

NATIONAL TEST HOUSE-ER (NTH), KOLKATA

5140804

IS 814 (2004)

Covered electrodes for manual metal arc welding of carbon and carbon manganese steel - Specification (Sixth Revision)

32500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6 & 8.2(Carbon- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	500	-
6 & 8.2(Silicon- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	500	-
6 & 8.2(Manganese- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	500	-
6 & 8.2(Phosphorous- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	500	-
6 & 8.2(Sulphur- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	500	-
6 & 8.2(Vanadium- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	500	-
6 & 8.2(Nickel- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	500	-
6 & 8.2(Chromium- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	500	-
6 & 8.2(Molybdenum- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	500	-
6 & 8.2(Mn+Ni+Cr+Mo+V - Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	500	-
7.1.1(Diameter of Core Wire)	-	500	-
7.1.2(Length of Electrodes)	-	500	-
7.2.1(Contact End)	-	500	-
7.2.2(Arc striking End)	-	500	-
7.3(Concentricity of Flux covering with core wire)	-	1500	-
7.4(Defects of Core wire and Coverings)	-	500	-
9.1.2 Table 6 (Ultimate Tensile Strength-Annex F)	-	1000	-
9.1.2 Table 6 ( Yield Stress -Annex F)	-	1000	-
9.1.2 Table 6 (Percentage Elongation on Gauge Length-Annex F)	-	1000	-
9.1.3 Table 6 ( Impact Strength-Annex F)	-	4000	-
9.2(Butt Weld Bend Test-IS 1599)	-	8000	-
9.3(Running PerformanceTest-Annex H)	-	2000	-
9.4(Increased Metal Recovery Test-IS 13043)	-	3000	-
9.5(Diffusible Hydrogen Evaluation Test-IS 11802)	-	5000	-
9.6(Radiographic Test- IS 1182)	-	1000	-

14 Jun, 2027

-
-

2388

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 14756 (2024)

Stainless Steel Utensils - Specification (THIRD REVISION)

Stainless Steel Utensils

14500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 3.1(Material used for manufacturing utensils)	-	14500	-
Cl 3.2(Material used for composite bottom)	-	14500	-
Cl 3.3(Material used for body of utensil of 3-ply construction)	-	14500	-
Cl 3.4(Material used for stainless steel lid)	-	14500	-
Cl 3.5(Material used for tempered glass lid)	-	14500	-
Cl 3.5(Material used for stainless steel rim)	-	14500	-
Cl 4.2 & Table 1(Minimum Sheet Thickness for Body of Utensil)	-	14500	-
Cl 4.2 & Table 2(Minimum Sheet Thickness for Lid of Utensil)	-	14500	-
Cl 4.2(Thickness of the finished utensil)	-	14500	-
Cl 4.3(Classification)	-	14500	-
Cl 4.4 (i)(Thickness of Aluminium disc/core)	-	14500	-
Cl 4.4 (ii)(Thickness of Protector/cowl)	-	14500	-
Cl 4.5(Minimum sheet thickness (3-ply utensil))	-	14500	-
Cl 4.5(Thickness of finished utensil (3-ply utensil))	-	14500	-
Cl 5.1(Manufacturing defect & visual appearance)	-	14500	-
CL 5.2(Accessibility for cleaning)	-	14500	-
Cl 5.3(Joining of handles to the utensils)	-	14500	-
Cl 5.4(Requirement for handles)	-	14500	-
Cl 5.5(Welding (Finish))	-	14500	-
Cl 5.6(Finish of 3-ply utensil)	-	14500	-
Cl 5.7(Requirement for coating)	-	14500	-
Cl 5.8(Coating thickness test)	-	14500	-
Cl 5.8(Coating adhesion test)	-	14500	-
Cl 5.8.1(Thermal shock test (Coating))	-	14500	-
Cl 6.1(Staining Test (Type Test - Frequency Once in a Year))	-	14500	-
Cl 6.2(Mechanical Shock Test (for Cladded Utensils Only))	-	14500	-
Cl 6.3(Thermal Shock Test (for Cladded Utensils Only))	-	14500	-
Cl 6.4(Dry Heat Test (for Cladded Utensils Only))	-	14500	-
Cl 6.5(Coating Thickness Test (for Copper Deposit))	-	14500	-
Cl 6.6(Thermal shock test (3-ply construction utensil body))	-	14500	-
Cl 6.7(Nominal Capacity Test)	-	14500	-
Cl 8(Marking)	-	14500	-

31 Dec, 2026

-
-

2389

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 1381 : Part 1 (2003)

Laboratory glassware - Narrow - Necked boiling flasks (Second Revision)

12400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3, 4(Type of Flask)	-	10200	For mechanical and performance tests
3.1, 4.1(Series of Nominal Capacity)	-	10200	For mechanical and performance tests
3.2, 4.2(Nominal Capacity )	-	10200	For mechanical and performance tests
3.3, 4.3(Material )	-	10200	For mechanical and performance tests
3.4, 3.4.1 & 4.4, 4.4.1(Construction- a) Stability )	-	10200	For mechanical and performance tests
3.4, 3.4.2 & 4.4, 4.4.2(Construction- b) Neck )	-	10200	For mechanical and performance tests
3.5, 4.5(Dimensions (in mm) (Table 1&2))	-	4000	For complete dimension test
3.5.2(Neck Length)	-	4000	For complete dimension test
3.5.3, 4.5.2(Dimensions of base )	-	4000	For complete dimension test
3.5.4, 4.5.3(Wall thickness)	-	4000	For complete dimension test
5(Marking )	-	10200	For mechanical and performance tests

04 Dec, 2028

-
-

2390

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 1381 : Part 2 (2019)

Laboratory glassware - Boiling flasks: Part 2 boiling flasks with conical ground joints (Third Revision)

12400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Type)	-	10200	For mechanical and performance tests
4(Series of capacities)	-	10200	For mechanical and performance tests
5(Material)	-	10200	For mechanical and performance tests
5(Material)	-	10200	For mechanical and performance tests
6(Dimensions)	-	4000	For complete dimension test
6(Dimensions)	-	4000	For complete dimension test
6(Dimensions)	-	4000	For complete dimension test
6(Dimensions)	-	4000	For complete dimension test
7(Ground glass joints)	-	10200	For mechanical and performance tests
8(Thermal shock endurance)	-	10200	For mechanical and performance tests
9(Marking)	-	10200	For mechanical and performance tests
9(Marking)	-	10200	For mechanical and performance tests
9(Marking)	-	10200	For mechanical and performance tests
9(Marking)	-	10200	For mechanical and performance tests

04 Dec, 2028

-
-

2391

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 1117 (2018)

Laboratory glassware - Single - Volume pipettes (Second Revision)

12800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1.1&3(Marking)	-	12800	For Complete Testing
3(Class of Accuracy)	-	12800	For Complete Testing
4.1(Nominal capacities)	-	12800	For Complete Testing
4.2(Accuracy)	-	12800	For Complete Testing
5.1(Material)	-	12800	For Complete Testing
5.1(Material)	-	12800	For Complete Testing
5.1.1(Limit of Alkalinity)	-	12800	For Complete Testing
5.2(Pattern of Pipette)	-	12800	For Complete Testing
5.3(Workmanship & Finish)	-	12800	For Complete Testing
5.4(i) Distance of graduation line from top of pipette.)	-	12800	For Complete Testing
5.4(ii) Distance from graduation line to top of bulb(pattern 2))	-	12800	For Complete Testing
5.4(iii)Distance from graduation line to tip of jet (Pattern 1))	-	12800	For Complete Testing
5.4(iv) Wall thickness)	-	12800	For Complete Testing
5.4(a) pattern 2 pipette of 1 and 2ml )	-	12800	For Complete Testing
5.4(b) Other pipettes)	-	12800	For Complete Testing
5.4(v) Dia. of safety bulb (if provided ))	-	12800	For Complete Testing
5.4(vi)Distance from top of pipette to bottom of safety bulb )	-	12800	For Complete Testing
5.4(vii) Overall length, L)	-	12800	For Complete Testing
5.4(viii) Length of suction tube, L1 )	-	12800	For Complete Testing
5.4(ix) Length of delivery tube, L2 )	-	12800	For Complete Testing
5.4(x) Internal dia. of suction tube D1 )	-	12800	For Complete Testing
5.4(xi) External dia. of bulb D2 )	-	12800	For Complete Testing
5.4(xii) External dia. of delivery tube D3 )	-	12800	For Complete Testing
5.5(Delivery Time)	-	12800	For Complete Testing
5.5(Delivery Time)	-	12800	For Complete Testing
5.6&7(Graduation line & Visibility )	-	12800	For Complete Testing
6.1.2(Marking)	-	12800	For Complete Testing
6.1.1&3(Marking)	-	12800	For Complete Testing
3(Class of Accuracy)	-	12800	For Complete Testing
4.1(Nominal capacities)	-	12800	For Complete Testing
4.2(Accuracy)	-	12800	For Complete Testing
5.1(Material)	-	12800	For Complete Testing
5.1(Material)	-	12800	For Complete Testing
5.1.1(Limit of Alkalinity)	-	12800	For Complete Testing
5.2(Pattern of Pipette)	-	12800	For Complete Testing
5.3(Workmanship & Finish)	-	12800	For Complete Testing
5.4(i) Distance of graduation line from top of pipette.)	-	12800	For Complete Testing
5.4(ii) Distance from graduation line to top of bulb(pattern 2))	-	12800	For Complete Testing
5.4(iii)Distance from graduation line to tip of jet (Pattern 1))	-	12800	For Complete Testing
5.4(iv) Wall thickness)	-	12800	For Complete Testing
5.4(a) pattern 2 pipette of 1 and 2ml )	-	12800	For Complete Testing
5.4(b) Other pipettes)	-	12800	For Complete Testing
5.4(v) Dia. of safety bulb (if provided ))	-	12800	For Complete Testing
5.4(vi)Distance from top of pipette to bottom of safety bulb )	-	12800	For Complete Testing
5.4(vii) Overall length, L)	-	12800	For Complete Testing
5.4(viii) Length of suction tube, L1 )	-	12800	For Complete Testing
5.4(ix) Length of delivery tube, L2 )	-	12800	For Complete Testing
5.4(x) Internal dia. of suction tube D1 )	-	12800	For Complete Testing
5.4(xi) External dia. of bulb D2 )	-	12800	For Complete Testing
5.4(xii) External dia. of delivery tube D3 )	-	12800	For Complete Testing
5.5(Delivery Time)	-	12800	For Complete Testing
5.5(Delivery Time)	-	12800	For Complete Testing
5.6&7(Graduation line & Visibility )	-	12800	For Complete Testing
6.1.2(Marking)	-	12800	For Complete Testing
6.1.1&3(Marking)	-	12800	For Complete Testing
3(Class of Accuracy)	-	12800	For Complete Testing
4.1(Nominal capacities)	-	12800	For Complete Testing
4.2(Accuracy)	-	12800	For Complete Testing
5.1(Material)	-	12800	For Complete Testing
5.1(Material)	-	12800	For Complete Testing
5.1.1(Limit of Alkalinity)	-	12800	For Complete Testing
5.2(Pattern of Pipette)	-	12800	For Complete Testing
5.3(Workmanship & Finish)	-	12800	For Complete Testing
5.4(i) Distance of graduation line from top of pipette.)	-	12800	For Complete Testing
5.4(ii) Distance from graduation line to top of bulb(pattern 2))	-	12800	For Complete Testing
5.4(iii)Distance from graduation line to tip of jet (Pattern 1))	-	12800	For Complete Testing
5.4(iv) Wall thickness)	-	12800	For Complete Testing
5.4(a) pattern 2 pipette of 1 and 2ml )	-	12800	For Complete Testing
5.4(b) Other pipettes)	-	12800	For Complete Testing
5.4(v) Dia. of safety bulb (if provided ))	-	12800	For Complete Testing
5.4(vi)Distance from top of pipette to bottom of safety bulb )	-	12800	For Complete Testing
5.4(vii) Overall length, L)	-	12800	For Complete Testing
5.4(viii) Length of suction tube, L1 )	-	12800	For Complete Testing
5.4(ix) Length of delivery tube, L2 )	-	12800	For Complete Testing
5.4(x) Internal dia. of suction tube D1 )	-	12800	For Complete Testing
5.4(xi) External dia. of bulb D2 )	-	12800	For Complete Testing
5.4(xii) External dia. of delivery tube D3 )	-	12800	For Complete Testing
5.5(Delivery Time)	-	12800	For Complete Testing
5.5(Delivery Time)	-	12800	For Complete Testing
5.6&7(Graduation line & Visibility )	-	12800	For Complete Testing
6.1.2(Marking)	-	12800	For Complete Testing

04 Dec, 2028

-
-

2392

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 15997 (2012)

Low nickel austenitic stainless steel sheet and strip for utensils and kitchen appliances - Specification

Low nickel austenitic stainless steel sheet and strip

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 8.1, 8.1.1 & 10.1 Table 1(Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	10000	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	10000	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	10000	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Nickel -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	10000	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Chromium -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	10000	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	10000	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	10000	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Copper -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	10000	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	10000	-
6(Freedom From Defects)	-	10000	-
9.3(Tensile Test-1608:Part 1)	-	10000	-
9.3, Table 3 (Yield Strength, Mpa)	-	10000	-
9.3, Table 3 (Tensile Strength, Mpa)	-	10000	-
9.3, Table 3 (Elongation, %)	-	10000	-
9.4(Erichsen Cupping Test,(Average depth of cupping) mm)	-	10000	-
11(Surface finish)	-	10000	-
12(Dimensions)	-	10000	-
14.1(Thickness,mm)	-	10000	-
14.2( Width, mm)	-	10000	-
14.3(Length, mm)	-	10000	-
14.4(Flatness, mm)	-	10000	-
14.5(Camber, mm)	-	10000	-
Clause 9.1, 9.2 & Table 3(IS 1608 Part 1)	-	10000	-
17(Marking)	-	10000	-
Clause 9.1, 9.2 & Table 3(0.2 Percent Yield Strength)	-	10000	-
4.1(General requirements)	-	10000	-
6(Freedom from defects)	-	10000	-
7(Heat treatment)	-	10000	-
8.1, table 1(C Si Mn Ni Cr S P Cu Ni)	-	10000	-
8.1.1, table 2(Carbon Silicon Manganese Nickel Chromium Sulphur Phosphorus Copper Nitrogen)	-	10000	-
9.1(Sample plan)	-	10000	-
9.2(Tensile test)	-	10000	-
9.3(Mechanical properties)	-	10000	-
9.4(Erichsen cupping test)	-	10000	-
10(Retests)	-	10000	-
11(Surface finish)	-	10000	-
12(Dimensions)	-	10000	-
13(Edge condition)	-	10000	-
14.1(Thickness)	-	10000	-
14.2.1(Mill Edge)	-	10000	-
14.2.2(Trimmed Edge)	-	10000	-
14.3(Length)	-	10000	-
14.4(Flatness)	-	10000	-
15(Inspection)	-	10000	-
17(Marking)	-	10000	-
14.5(Camber)	-	10000	-

31 Dec, 2026

-
-

2393

National Test House (NWR) - NTH, Jaipur

8122904

IS 17425 (2020)

Irrigation Equipment - Quick Coupled Polyethylene Pipes and Fittings for Sprinkler Irrigation Systems - Specification

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Dimensions of pipe - i) Outside diameter)	-	500	-
5(Dimensions of pipe - ii) Wall thickness minimum)	-	500	-
6(Visual Appearance)	-	500	-
7.1(Hydraulic Characteristics - Quality test)	-	5000	-
7.1(Hydraulic Characteristics - Acceptance test)	-	5000	-
7.2(Reversion Test)	-	1000	-
7.3(Tensile Test- i) Tensile Strength)	-	1000	-
7.3(Tensile Test - ii)Elongation at Break)	-	1000	-
7.4(Fusion Compatibility Test- a) Quality test)	-	5000	-
7.4(Fusion Compatibility Test- b) Acceptance test)	-	5000	-
7.5(Density)	-	2000	-
7.6(Melt Flow Rate)	-	2000	-
7.6(Melt Flow Rate)	-	2000	-
4.2(Carbon black- a)carbon content)	-	1500	-
4.2(Carbon black- b) Dispersion of carbon black)	-	1000	-
7.6(Melt now Rate (MFR))	-	2000	-
7.5(Density)	-	2000	-
7.4 Table-2(Fusion Compatibility Test)	-	5000	-
7.3(Tensile Test)	-	1000	-
7.2(Reversion Test)	-	1000	-
7.1 Table -2(Hydraulic Characteristics)	-	5000	-
6.1(VISUAL APPEARANCE)	-	1000	-
5.1.2(Ovality)	-	1000	-
5.1 table -1(DIMENSIONS OF PIPES)	-	500	-
Cl. 4.2 , IS 2530-1963, Cl. 10(Cabon Black Content)	-	1500	-
4.1.2(The MFR of the material shall be between 0.2 to 1.1 (both inclusive) when tested at 190 T at a nominal load of 50 N by the method prescribed in 7 of IS 2530. The MFR of the material shall also be within 20% of the value declared by the manufacturer.’)	-	2000	-
4.1.1(density shall be between 940.4 kg/m’ and 958.4 kg/m3 (both inclusive) when determined at 27°C according to procedure prescribed in Annex A of IS 7328. The value of the density shall also not differ from the nominal value by more than 3 kg/m2 as per 5.2.1.1 of IS 7328.)	-	2000	-
4.1(melt flow rating (MFR) shall not exceed 1.10 g/10 min.)	-	2000	-
3(CLASSIFICATION OF PIPES)	-	500	-
4.1(Quick Coupled Male and Female Couplers)	-	500	-
4.1(Quick Coupled Male and Female Couplers)	-	5000	-
4.1.3(Workmanship and appearance)	-	500	-
4.1.4(Holding attachments for coupler parts)	-	500	-
6.1.3(Weldability Test- a) Quality test)	-	5000	-
6.1.3(Weldability Test- b) Acceptance test)	-	5000	-
3(Quick Coupled pipes)	-	500	-
3(QUICK COUPLED PIPES)	-	500	-
4(QUICK COUPLED FITTINGS)	-	500	-
4.1 (a)(Quick Coupled Male and Female Couplers)	-	500	-
4.1 (b)(HDPE couplers —)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Aluminium Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Copper Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Magnesium Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Silicon Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Iron Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Manganese Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Zinc Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Titanium Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Chromium Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Remarks)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Aluminium Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Copper Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Magnesium Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Silicon Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Iron Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Manganese Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Zinc Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Titanium Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Chromium Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Remarks)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Copper Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Magnesium Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Silicon Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Iron Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Manganese Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Zinc Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Titanium Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Chromium Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Remarks)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Aluminium Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Copper Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Magnesium Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Silicon Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Iron Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Manganese Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Zinc Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Chromium Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Remarks)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Aluminium Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Copper Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Magnesium Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Silicon Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Iron Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Manganese Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Zinc Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Titanium Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Chromium Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Cr + Mn)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Aluminium Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Copper Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Magnesium Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Silicon Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Iron Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Manganese Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Zinc Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Chromium Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Cr + Mn)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Copper Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Magnesium Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Silicon Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Iron Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Manganese Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Zinc Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Titanium Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Chromium Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Cr + Mn)	-	500	-
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Copper Content)	-	500	-
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Silicon Content)	-	500	-
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Magnesium Content)	-	500	-
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Iron Content)	-	500	-
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Manganese Content)	-	500	-
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Nickel Content)	-	500	-
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Zinc Content)	-	500	-
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Lead Content)	-	500	-
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Tin Content)	-	500	-
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Titanium Content)	-	500	-
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Aluminium Content)	-	500	-
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1)(Carbon Content)	-	500	-
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1)(Manganese Content)	-	500	-
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1)(Sulphur Content)	-	500	-
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1)(Phosphorous Content)	-	500	-
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1) Al-Killed(Aluminium Content)	-	500	-
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1) Si-Killed(Silicon Content)	-	500	-
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1) Al-Si-Killed(Silicon Content)	-	500	-
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1) Al-Si-Killed(Aluminium Content)	-	500	-
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 10(Cabon Black Content)	-	500	-
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 16(Carbon Black Dispersion)	-	500	-
4.1 .1.2.1(HDPE couplers)	-	500	-
4.1 .1.2.2(HDPE couplers)	-	500	-
4.1.4(a)(Holding Attachments for Coupler Parts)	-	1000	-
4.1.4(b)(Holding Attachments for Coupler Parts)	-	1000	-
4.2.1(Quick Coupled ~pe HDPE Fittings)	-	500	-
4.2.2(Quick Coupled ~pe HDPE Fittings)	-	500	-
4.2.3(Quick Coupled ~pe HDPE Fittings)	-	500	-
4.2.4(Quick Coupled ~pe HDPE Fittings)	-	500	-
4.2.5(Quick Coupled ~pe HDPE Fittings)	-	500	-
4.2.6(Quick Coupled ~pe HDPE Fittings)	-	500	-
4.2.7(Quick Coupled ~pe HDPE Fittings)	-	500	-
4.2.7(1 Dimensions of Quick Coupled Pipes and Fittings)	-	1000	-
6.1.1, 6.1.1.1(Leakage Test)	-	5000	-
6.1.1, 6.1.1.1(Leakage Test)	-	5000	-
6.1.2, 6.1.2.1(Hydraulic Proof Test)	-	5000	-
6.1.2.2(Hydraulic Proof Test)	-	5000	-
6.1.2.2(Hydraulic Proof Test)	-	5000	-
6.1.3, 6.1.3.1(Weldability Test)	-	5000	-
6.1.3.1.1(Weldability Test)	-	5000	-
6.1.3.2(Quick coupled fittings)	-	500	-
6.2, 6.2.1(Quick Coupled Fittings)	-	500	-
7.2.1(Visual and Workmanship Requirement)	-	1000	-
6.2 b(Material Identification - Male & Female Coupler)	-	1000	-
6.3.3(Material Identification - Insert Valve Coupler)	-	1000	-
6.3.3(Material Identification - Insert Valve Coupler)	-	1000	-
6.3.4()	-	500	-
6.3.5(Material Identification - Saddle)	-	1000	-
6.3.5(Material Identification - Pipe Ends)	-	1000	-
6.3.6(Quick Coupled Pump Connectors - Visual)	-	1000	-
4.2(Metallic Couplers)	-	1000	-
4.2(Metallic Couplers)	-	1000	-
7.2.1(Leakage Test)	-	5000	-
Cl.4.1.3(Den sity Test)	-	2000	-
Cl.4.1.3(MFR Test)	-	2000	-
Cl.4.1.3(MFR Test)	-	2000	-
Cl.4.1.3(MFR Test)	-	2000	-
Cl.4.1.3(MFR Test)	-	2000	-
Cl.4.1.3(Thermal Stabi lity)	-	2000	-
Cl.4.1.3(Thermal Stabi lity)	-	2000	-
Cl.4.1.3, T-1(Volatile Matter)	-	1000	-
Cl.4.1.3, T-1(Volatile Matter)	-	1000	-
Cl.4.1.3, T-1(Volatile Matter)	-	1000	-
Cl.4.1.3, T-1(Volatile Matter)	-	1000	-
Cl.4.1.3, T-1(Volatile Matter)	-	1000	-
Cl.4.1.3, T-1(Volatile Matter)	-	1000	-
Cl.4.1.3, T-1(Volatile Matter)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.4(Carbon Black Content)	-	1500	-
Cl.4.1.4(Carbon Black Content)	-	1500	-
Cl.4.1.4(Carbon Black Content)	-	1500	-
Cl.4.1.4(Carbon Black Di spersion)	-	1000	-
Cl.4.1.4(Carbon Black Di spersion)	-	1000	-
Cl.4.1.4(Carbon Black Di spersion)	-	1000	-
Cl.5(Di men sion)	-	1000	-
Cl.5.1.l(Outside Diameter)	-	1000	-
Cl.5.1.l(Outside Diameter)	-	1000	-
Cl.6.2.L(Wall Thickness)	-	1000	-
Cl.6.2.4(Workmanship and Appearance)	-	1000	-
Cl.6.2.6(Rubber Ring Hardness)	-	1000	-
Cl.6.2.6(Ageing Test)	-	1000	-
Cl.7.1.l(Visual Anneara nce)	-	1000	-
Cl.7.1.2(Hydraulic Characteristic)	-	5000	-
Cl.7.1.2(Hydraulic Characteristic)	-	5000	-
Cl.7.1.2(Hydraulic Characteristic)	-	5000	-
Cl.7.1.2(Hydraulic Characteristic)	-	5000	-
Cl.7.1.3(Reversion Test)	-	1000	-
Cl.7.1.3(Reversion Test)	-	1000	-
Cl.7.1.4(Tensile Test)	-	1000	-
Cl.7.1.4(Tensile Test)	-	1000	-
Cl.7.1.4(Tensile Test)	-	1000	-
Cl.7.1.4(Elongation)	-	1000	-
Cl.7.1.4(Elongation)	-	1000	-
Cl.7.1.5(Fusion Compatibility)	-	5000	-
Cl.7.1.5(Fusion Compatibility)	-	5000	-
Cl.7.1.5(Fusion Compatibility)	-	5000	-
Cl.7.1.5(Fusion Compatibility)	-	5000	-
Cl.7.1.6(Corrected Density)	-	2000	-
Cl.7.1.7(MFR Test)	-	2000	-
Cl.7.1.7(MFR Test)	-	2000	-
Cl.7.1.7(MFR Test)	-	2000	-
Cl.7.1.7(MFR Test)	-	2000	-
Cl.7.2.l(Leakage Test)	-	5000	-
Cl.7.2.l(Leakage Test)	-	5000	-
Cl.7.2.l(Leakage Test)	-	5000	-
Cl.7.2.l(Leakage Test)	-	5000	-
Cl.7.2.l(Leakage Test)	-	5000	-
Cl.7.2.2(Cl.7.2.2)	-	500	-
Cl.7.2.3(Weld ability Test)	-	5000	-
Cl.7.2.3(Weld ability Test)	-	5000	-
6.2 (iii) Rubber Rings (a) Shore hardness(Shore hardness)	-	1000	-
6.2 (iii) Rubber Rings (b) Accelerated Storage test(Accelerated Storage test)	-	1000	-
5(Dimensions of pipe (outside diameter, ovality, wall thickness))	-	1000	-
6.1(Thermal Stability (OIT))	-	2000	-
6.1(Volatile Matter)	-	1000	-
6.1(Water content)	-	1000	-
6.1(Tensile strength at Yield & Elongation at break)	-	2000	-
6.1(Carbon Black Content)	-	1500	-
6.1(Carbon Black Dispersion)	-	1000	-
6.2.1(Base Density x 2)	-	2000	-
6.2.1(Melt Flow Index x 2)	-	2000	-
6.2.1(Thermal Stability (OIT) x 2)	-	2000	-
6.2.1(Volatile Matter x 2)	-	1000	-
6.2.1(Water content x 2)	-	1000	-
6.2.1(Carbon Black Content x 2)	-	1500	-
6.2.1(Carbon Black Dispersion x 2)	-	1000	-
6.2.1(Wall thickness of male & female coupler)	-	1000	-
6.2.4(Workmanship and appearance (Visual))	-	1000	-
6.2.5(Holding attachment for coupler parts)	-	1000	-
6.2.5(Material Composition (Chemical Analysis))	-	3000	-
4.2.2(Coating thickness (Hot dip Galvanized or Electroplated or Passivated or Powder Coated))	-	2000	-
6.2.6(Material Identification (Chemical Analysis))	-	2000	-
6.2.6(Color)	-	500	-
6.2.6(Rubber Ring Hardness Shore – A (Before Ageing))	-	1000	-
6.2.6(Ageing Charges for rubber ring)	-	1000	-
7.1.1(Visual appearance of pipes)	-	1000	-
7.1.2(Hydraulic Characteristics)	-	5000	-
7.1.2((a) Acceptance Test (48 hrs) / 80˚ C)	-	5000	-
7.1.2((b) Type test ( 165 hrs) / 80˚ C)	-	5000	-
7.1.3(Reversion)	-	1000	-
7.1.4(Tensile strength & elongation)	-	2000	-
7.1.5(Fusion Compatibility test)	-	5000	-
7.1.5((a) Acceptance Test (48 hrs) / 80˚ C)	-	5000	-
7.1.5((b) Type test ( 165 hrs) / 80˚ C)	-	5000	-
7.1.6(Corrected Density)	-	2000	-
7.1.6(Base Density)	-	2000	-
7.1.6(Carbon black Content)	-	1500	-
7.1.7(Melt Flow Rate (MFR))	-	2000	-
7.2.1(Leakage test 1hour / 27°C)	-	5000	-
7.2.2(Hydraulic Proof test 1hour / 27°C)	-	5000	-
7.2.3((a) Acceptance Test (48 hrs) / 80˚ C)	-	5000	-
7.2.3((b) Type test ( 165 hrs) / 80˚ C)	-	5000	-
8(Supply of pipe (Visual))	-	1000	-
4.1.1 (Table-1)(Density)	-	2000	-
4.1.1 (Table-1)(Melt Flow Index)	-	2000	-
4.1.1 (Table-1)(Oxidation Induction Time)	-	2000	-
4.1.1 (Table-1)(Volatile Matter)	-	1000	-
4.1.1 (Table-1)(Water content)	-	1000	-
4.1.1 (Table-1)(Tensile strength at Yield & Elongation at break)	-	2000	-
4.1.4(Carbon Black Content)	-	1500	-
4.1.4(Carbon Black Dispersion)	-	1000	-
4.1.1(Polyethylene material)	-	1000	-
4.1.3, Table 1,(i)(Bass density)	-	2000	-
4.1.3, Table 1,(ii)(Melt flow rate)	-	2000	-
4.1.3, Table 1,(iii)(Thermal stability)	-	2000	-
4.1.3, Table 1,(iv)(Volatile matter)	-	1000	-
4.1.3, Table 1,(v)(Water content)	-	1000	-
4.1.3, Table 1,(vi)(Minimum tensile strength at yield)	-	2000	-
4.1.3, Table 1,(vii)(Minimum elongation at break)	-	2000	-
4.1.4(The Carbon Content and Dispersion)	-	2000	-
4.1.5(Carbon Black Specification)	-	1500	-
4.1.7(Rework Material)	-	500	-
4.2(Metallic Couplers)	-	500	-
7.1.1(Visual Appearance and Workmanship)	-	1000	-
7.1.2(Hydraulic Performance Characteristic)	-	5000	-
7.1.3(Reversion Test)	-	1000	-
7.1.4(Tensile Test)	-	2000	-
7.1.5(Fusion Compatibility Test)	-	5000	-
7.1.6(Corrected Density)	-	2000	-
7.1.7(Melt flow rate)	-	2000	-
7.2.1(Leakage Test)	-	5000	-
7.2.2(Hydraulic Proof Test)	-	5000	-
7.2.3(Weldability Test)	-	5000	-
7.3(Quick Couple Fitting)	-	1000	-
10(Marking)	-	500	-
5.1.2(Squareness)	-	1000	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Aluminium Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Titanium Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Titanium Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Aluminium Content)	-	500	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
6.1(Quick Coupled Pipes and Fittings)	-	1000	-
5.1, Table 1,(i)(Plain pipes)	-	500	-

31 Dec, 2026

-
Included w.e.f 16.07.2025 Exclusion: Cl 4.3 (Anti-oxidant) and excluding Sprinkler fitting

2394

National Test House (NWR) - NTH, Jaipur

8122904

IS 4985 (2021)

UNPLASTICIZED PVC PIPES FOR POTABLE WATER SUPPLIES SPECIFICATION Fourth Revision

41000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.1(Colour)	-	500	-
10.1(Surface Finish)	-	500	-
7.2.1.1 Table3(Angle of taper (Note-1))	-	500	-
10.7(Sulphated Ash Content)	-	1000	-
5(CLASSIFICATION OF PIPES)	-	500	-
Cl-7.1(Mean out side Diameter (For less than or equal to 40 mm- Average of 8 , For higher diameters up to 110 mm average of 6))	-	1000	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum))	-	1000	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Mamimum))	-	1000	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. Variation)	-	1000	-
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Minimum))	-	1000	-
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Maximum))	-	1000	-
7.1.1.2(DIMENSIONS-PIPE-Ovality (Maximum))	-	1000	-
7.1.2.1(DIMENSIONS-PIPE-Thickness(Minimum))	-	1000	-
7.1.2.1(DIMENSIONS-PIPE-Thickness(Maximum))	-	1000	-
7.1.2.1(DIMENSIONS-PIPE-Average Thickness)	-	1000	-
Cl- 7.2(Socket length (Take 4 reading & minimum will be reported))	-	1000	-
7.2.1(DIMENSIONS-Socket)	-	1000	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Minimum Length)	-	1000	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Minimum))	-	1000	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Maximum))	-	1000	-
7.2.1.2(a)-Table 5(DIMENSIONS-Sockets for elastomeric sealing ring joints-Minimum depth of engagement)	-	1000	-
7.2.1.2-Table 4(DIMENSIONS-Sockets for elastomeric sealing ring joints-Socket inner Diameter)	-	1000	-
8(SEALING RINGS)	-	500	-
9.1(PIPE ENDS)	-	500	-
10.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	1000	-
10.1.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	1000	-
10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity)	-	1000	-
10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-	1000	-
10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-	2000	-
10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-	2000	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test))	-	20000	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test))	-	5000	-
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)-for Integral Sealing Ring Sockets)	-	5000	-
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Integral Sealing Ring Sockets)	-	5000	-
11.1.1(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Plumbing pipes)	-	5000	-
11.2(Resistance to External Blows at 0°C)	-	2000	-
10.3(Effect on Water Test)	-	5000	-
7.1.3(mean outside diameter, outside diameter at any point, and wall thickness of plumbing pipes)	-	1000	-
7.1.4(Length)	-	500	-
7.2.1.2b(Maximum inner diameter of groove)	-	500	-
13.1(Marking)	-	500	-
cL-13.1.1(Marking)	-	500	-
Cl-13.1.2(Marking)	-	500	-

31 Dec, 2026

-
Included w.e.f 16.07.2025 Excluding: Cl 6.1.2 (PVC Resin), Cl 6.1.1 (VCM Content)

2395

Atmy Analytical Labs Pvt. Ltd., Faridabad

8167506

IS 18755 (2024)

Tri-ply SS-AL-SS material used for manufacture of utensils and kitchen appliances Specification

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(Supply of material and designation)	-	500	-
Cl-5(Manufacturer)	-	500	-
Cl-6(Aluminium for use as matrix)	-	3500	For complete 6.0 clause- Rs 3500/-
Cl-6(Top-surface of the aluminium matrix)	-	0	For complete 6.0 clause- Rs 3500/-
Cl-6(Bottom-surface of the aluminium matrix)	-	0	For complete 6.0 clause- Rs 3500/-
Cl-7.1.1(Tensile properties)	-	4500	For complete 7.1 clause- Rs 4500/-
Cl-7.1.1(Apparent Yield Strength)	-	0	For complete 7.1 clause- Rs 4500/-
Cl-7.1.1(Tensile Strength Mpa,)	-	0	For complete 7.1 clause- Rs 4500/-
Cl-7.1.2(Test Specimen)	-	0	For complete 7.1 clause- Rs 4500/-
Cl-7.1.3(Test Parameters)	-	0	For complete 7.1 clause- Rs 4500/-
Cl-7.2.1(Bond strength of Tri-Ply)	-	5000	For complete 7.2 clause- Rs 5000/-
Cl-7.2.2(Sample Preparation and Test Specimen)	-	0	For complete 7.2 clause- Rs 5000/-
Cl-7.2.3(Test Apparatus)	-	0	For complete 7.2 clause- Rs 5000/-
Cl-7.2.4(Procedure)	-	0	For complete 7.2 clause- Rs 5000/-
Cl-8.1(Sample of suitable size)	-	6500	For complete 8.0 clause- Rs 6500/-
Cl-8.2(specimen for peel strength)	-	0	For complete 8.0 clause- Rs 6500/-
Cl-8.3, table-3(T-Peel Strength, N/mm, Min SS304 and Al 19500 interface)	-	0	For complete 8.0 clause- Rs 6500/-
Cl-8.3, table-3(T-Peel Strength, N/mm, Min SS430 and Al 19500 interface)	-	0	For complete 8.0 clause- Rs 6500/-
Cl-9.1(Thickness)	-	1500	-
Cl-9.2(Diameter)	-	1500	-
Cl-9.3(Flatness)	-	1500	-
Cl-10(surface finish)	-	1500	-
Cl-11(Workmanship, finish and appearance)	-	1500	-
Cl-14(Marking)	-	500	-

25 Feb, 2027

-
included w.e.f 26.11.2025

2396

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 3650 (1981)

Specification for combination side cutting pliers (Second Revision)

18500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3 Table 1(Dimensions- L)	-	6500	For complete dimensional test and other qualitative tests
3 Table 1(Dimensions- a)	-	6500	For complete dimensional test and other qualitative tests
3 Table 1(Dimensions- b)	-	6500	For complete dimensional test and other qualitative tests
3 Table 1(Dimensions- c1)	-	6500	For complete dimensional test and other qualitative tests
3 Table 1(Dimensions- e)	-	6500	For complete dimensional test and other qualitative tests
3 Table 1(Dimensions- h)	-	6500	For complete dimensional test and other qualitative tests
3 Table 1(Dimensions- h1)	-	6500	For complete dimensional test and other qualitative tests
3 Table 1(Dimensions- t)	-	6500	For complete dimensional test and other qualitative tests
4(Hardness- Near cutting edges)	-	5000	For mechanical test
4(Hardness- Body gripping surfce)	-	5000	For mechanical test
8.1(Cutting Test)	-	6500	For complete dimensional test and other qualitative tests
8.1(Cutting Test)	-	6500	For complete dimensional test and other qualitative tests
8.2(Tube Gripping Test)	-	6500	For complete dimensional test and other qualitative tests
8.3(Shock Test)	-	2000	For insulation and shock test
8.4(Torsion Test)	-	5000	For mechanical test
8.5(Handle Load Test)	-	5000	For mechanical test
8.5(Handle Load Test)	-	5000	For mechanical test
8.6(Bend Test)	-	6500	For complete dimensional test and other qualitative tests
8.7(Insulation Test)	-	2000	For insulation and shock test
6(Insulation)	-	2000	For insulation and shock test
5(Material testing (Chemical composition))	-	5000	For chemical test
5(Workmanship & Finish test)	-	6500	For complete dimensional test and other qualitative tests

04 Dec, 2028

-
Included w.e.f 22.07.2025

2397

Akshat Test Lab & Calibration Services, Ghaziabad

8186526

IS 9537 : Part 3 (1983)

Specification for conduits for electrical installations: Part 3 rigid plain conduits of insulating meterials

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Marking)	-	500	-
6.2(Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980)	-	500	-
6.3(Standard Mark on Conduit)	-	100	-
7.1.1(Maximum and minimum outside diameter of socket)	-	500	-
7.1.1 Table-2(Length of Socket end)	-	500	-
7.1.2(Maximum and minimum outside diameter of conduit)	-	300	-
7.2(Minimum inside diameter of conduit)	-	200	-
7.3(Length of conduit)	-	500	-
7.4(Unifomity of The wall Thickness)	-	1000	-
8.1(Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-	2000	-
9.2(Bending Test i) At Room Temp ii) At Low Temp (-5 ±2°C))	-	1000	-
9.3(Compression Test as per caluse 9.3 of IS: 9537 (Part 1)-1980)	-	1000	-
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	1000	-
9.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	900	-
10(Resistance to Heat -Ball presure test)	-	500	-
11(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	500	-
12(Electrical Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-	1000	-
13(Tests for external influence as per clause 13 of IS: 9537 (Part 1)-1980)	-	0	-
13(Tests for external influence as per clause 13 of IS: 9537 (Part 1)-1980)	-	0	-
12(3 Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-	0	-
12(3 Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-	0	-
11.0(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	0	-
10.0(Resistance to Heat -Ball presure test)	-	0	-
9.5 Fig.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	0	-
9.3(Compression Test at Full force applied (On load))	-	1000	-
9.2(Bending Test At Low Temp (-5 ±2°C))	-	500	-
9.2(Bending Test At Room Temp)	-	500	-
8.1(Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-	0	-
7.4(Unifomity of The wall Thickness)	-	0	-
7.3(Length of conduit)	-	0	-
7.2 Fig.3(Minimum inside diameter of conduit)	-	0	-
7.1.2 Fig.2(Minimum outside diameter of conduit)	-	0	-
7.1.1 Table-2(Length of Socket end)	-	0	-
7.1.1 Fig.8(Maximum inside diameter of socket)	-	0	-
7.1.1 Fig.7(Maximum outside diameter of socket)	-	0	-
6.3(Standard Mark on Conduit)	-	0	-
6.2(Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980)	-	0	-
6.1 - d(Marking)	-	0	-
6.1 - c(Marking)	-	0	-
6.1 - b(Marking)	-	0	-
6.1 - a(Marking)	-	0	-
12(Electrical Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-	500	-
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	0	-
9.3(Compression Test (after removal of force) as per caluse 9.3.3 of IS: 9537 (Part 1)-1980)	-	500	-
7.1.2 Fig.1(Maximum outside diameter of conduit)	-	0	-
6.1(Marking)	-	0	-
6.2(Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980)	-	0	-
6.3(Standard Mark on Conduit)	-	0	-
7.1.1(Maximum and minimum outside diameter of socket)	-	0	-
7.1.1 Table-2(Length of Socket end)	-	0	-
7.1.2(Maximum and minimum outside diameter of conduit)	-	0	-
7.2(Minimum inside diameter of conduit)	-	0	-
7.3(Length of conduit)	-	0	-
7.4(Unifomity of The wall Thickness)	-	0	-
8.1(Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-	0	-
9.2(Bending Test i) At Room Temp ii) At Low Temp (-5 ±2°C))	-	0	-
9.3(Compression Test as per caluse 9.3 of IS: 9537 (Part 1)-1980)	-	0	-
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	0	-
9.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	0	-
10(Resistance to Heat -Ball presure test)	-	0	-
11(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	0	-
12(Electrical Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-	0	-
13(Tests for external influence as per clause 13 of IS: 9537 (Part 1)-1980)	-	0	-
13(Tests for external influence as per clause 13 of IS: 9537 (Part 1)-1980)	-	0	-
12(3 Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-	0	-
12(3 Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-	0	-
11.0(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	0	-
10.0(Resistance to Heat -Ball presure test)	-	0	-
9.5 Fig.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	0	-
9.3(Compression Test at Full force applied (On load))	-	0	-
9.2(Bending Test At Low Temp (-5 ±2°C))	-	0	-
9.2(Bending Test At Room Temp)	-	0	-
8.1(Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-	0	-
7.4(Unifomity of The wall Thickness)	-	0	-
7.3(Length of conduit)	-	0	-
7.2 Fig.3(Minimum inside diameter of conduit)	-	0	-
7.1.2 Fig.2(Minimum outside diameter of conduit)	-	0	-
7.1.1 Table-2(Length of Socket end)	-	0	-
7.1.1 Fig.8(Maximum inside diameter of socket)	-	0	-
7.1.1 Fig.7(Maximum outside diameter of socket)	-	0	-
6.3(Standard Mark on Conduit)	-	0	-
6.2(Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980)	-	0	-
6.1 - d(Marking)	-	0	-
6.1 - c(Marking)	-	0	-
6.1 - b(Marking)	-	0	-
6.1 - a(Marking)	-	0	-
12(Electrical Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-	0	-
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	0	-
9.3(Compression Test (after removal of force) as per caluse 9.3.3 of IS: 9537 (Part 1)-1980)	-	0	-
7.1.2 Fig.1(Maximum outside diameter of conduit)	-	0	-
6.1(Marking)	-	0	-
6.2(Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980)	-	0	-
6.3(Standard Mark on Conduit)	-	0	-
7.1.1(Maximum and minimum outside diameter of socket)	-	0	-
7.1.1 Table-2(Length of Socket end)	-	0	-
7.1.2(Maximum and minimum outside diameter of conduit)	-	0	-
7.2(Minimum inside diameter of conduit)	-	0	-
7.3(Length of conduit)	-	0	-
7.4(Unifomity of The wall Thickness)	-	0	-
8.1(Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-	0	-
9.2(Bending Test i) At Room Temp ii) At Low Temp (-5 ±2°C))	-	0	-
9.3(Compression Test as per caluse 9.3 of IS: 9537 (Part 1)-1980)	-	0	-
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	0	-
9.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	0	-
10(Resistance to Heat -Ball presure test)	-	0	-
11(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	0	-
12(Electrical Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-	0	-
13(Tests for external influence as per clause 13 of IS: 9537 (Part 1)-1980)	-	0	-
13(Tests for external influence as per clause 13 of IS: 9537 (Part 1)-1980)	-	0	-
12(3 Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-	0	-
12(3 Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-	0	-
11.0(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	0	-
10.0(Resistance to Heat -Ball presure test)	-	0	-
9.5 Fig.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	0	-
9.3(Compression Test at Full force applied (On load))	-	0	-
9.2(Bending Test At Low Temp (-5 ±2°C))	-	0	-
9.2(Bending Test At Room Temp)	-	0	-
8.1(Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-	0	-
7.4(Unifomity of The wall Thickness)	-	0	-
7.3(Length of conduit)	-	0	-
7.2 Fig.3(Minimum inside diameter of conduit)	-	0	-
7.1.2 Fig.2(Minimum outside diameter of conduit)	-	0	-
7.1.1 Table-2(Length of Socket end)	-	0	-
7.1.1 Fig.8(Maximum inside diameter of socket)	-	0	-
7.1.1 Fig.7(Maximum outside diameter of socket)	-	0	-
6.3(Standard Mark on Conduit)	-	0	-
6.2(Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980)	-	0	-
6.1 - d(Marking)	-	0	-
6.1 - c(Marking)	-	0	-
6.1 - b(Marking)	-	0	-
6.1 - a(Marking)	-	0	-
12(Electrical Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-	0	-
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	0	-
9.3(Compression Test (after removal of force) as per caluse 9.3.3 of IS: 9537 (Part 1)-1980)	-	0	-
7.1.2 Fig.1(Maximum outside diameter of conduit)	-	0	-
6.1(Marking)	-	0	-
6.2(Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980)	-	0	-
6.3(Standard Mark on Conduit)	-	0	-
7.1.1(Maximum and minimum outside diameter of socket)	-	0	-
7.1.1 Table-2(Length of Socket end)	-	0	-
7.1.2(Maximum and minimum outside diameter of conduit)	-	0	-
7.2(Minimum inside diameter of conduit)	-	0	-
7.3(Length of conduit)	-	0	-
7.4(Unifomity of The wall Thickness)	-	0	-
8.1(Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-	0	-
9.2(Bending Test i) At Room Temp ii) At Low Temp (-5 ±2°C))	-	0	-
9.3(Compression Test as per caluse 9.3 of IS: 9537 (Part 1)-1980)	-	0	-
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	0	-
9.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	0	-
10(Resistance to Heat -Ball presure test)	-	0	-
11(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	0	-
12(Electrical Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-	0	-
13(Tests for external influence as per clause 13 of IS: 9537 (Part 1)-1980)	-	0	-
13(Tests for external influence as per clause 13 of IS: 9537 (Part 1)-1980)	-	0	-
12(3 Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-	0	-
12(3 Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-	0	-
11.0(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	0	-
10.0(Resistance to Heat -Ball presure test)	-	0	-
9.5 Fig.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	0	-
9.3(Compression Test at Full force applied (On load))	-	0	-
9.2(Bending Test At Low Temp (-5 ±2°C))	-	0	-
9.2(Bending Test At Room Temp)	-	0	-
8.1(Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-	0	-
7.4(Unifomity of The wall Thickness)	-	0	-
7.3(Length of conduit)	-	0	-
7.2 Fig.3(Minimum inside diameter of conduit)	-	0	-
7.1.2 Fig.2(Minimum outside diameter of conduit)	-	0	-
7.1.1 Table-2(Length of Socket end)	-	0	-
7.1.1 Fig.8(Maximum inside diameter of socket)	-	0	-
7.1.1 Fig.7(Maximum outside diameter of socket)	-	0	-
6.3(Standard Mark on Conduit)	-	0	-
6.2(Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980)	-	0	-
6.1 - d(Marking)	-	0	-
6.1 - c(Marking)	-	0	-
6.1 - b(Marking)	-	0	-
6.1 - a(Marking)	-	0	-
12(Electrical Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-	0	-
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	0	-
9.3(Compression Test (after removal of force) as per caluse 9.3.3 of IS: 9537 (Part 1)-1980)	-	0	-
7.1.2 Fig.1(Maximum outside diameter of conduit)	-	0	For BIS only Per Varity = Rs 15000/- For others Per Varity = Rs 30000/-
6.1(Marking)	-	0	-
6.2(Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980)	-	0	-
6.3(Standard Mark on Conduit)	-	0	-
7.1.1(Maximum and minimum outside diameter of socket)	-	0	-
7.1.1 Table-2(Length of Socket end)	-	0	-
7.1.2(Maximum and minimum outside diameter of conduit)	-	0	-
7.2(Minimum inside diameter of conduit)	-	0	-
7.3(Length of conduit)	-	0	-
7.4(Unifomity of The wall Thickness)	-	0	-
8.1(Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-	0	-
9.2(Bending Test i) At Room Temp ii) At Low Temp (-5 ±2°C))	-	0	-
9.3(Compression Test as per caluse 9.3 of IS: 9537 (Part 1)-1980)	-	0	-
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	0	-
9.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	0	-
10(Resistance to Heat -Ball presure test)	-	0	-
11(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	0	-
12(Electrical Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-	0	-
13(Tests for external influence as per clause 13 of IS: 9537 (Part 1)-1980)	-	0	-
13(Tests for external influence as per clause 13 of IS: 9537 (Part 1)-1980)	-	0	-
12(3 Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-	0	-
12(3 Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-	0	-
11.0(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	0	-
10.0(Resistance to Heat -Ball presure test)	-	0	-
9.5 Fig.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	0	-
9.3(Compression Test at Full force applied (On load))	-	0	-
9.2(Bending Test At Low Temp (-5 ±2°C))	-	0	-
9.2(Bending Test At Room Temp)	-	0	-
8.1(Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-	0	-
7.4(Unifomity of The wall Thickness)	-	0	-
7.3(Length of conduit)	-	0	-
7.2 Fig.3(Minimum inside diameter of conduit)	-	0	-
7.1.2 Fig.2(Minimum outside diameter of conduit)	-	0	-
7.1.1 Table-2(Length of Socket end)	-	0	-
7.1.1 Fig.8(Maximum inside diameter of socket)	-	0	-
7.1.1 Fig.7(Maximum outside diameter of socket)	-	0	-
6.3(Standard Mark on Conduit)	-	0	-
6.2(Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980)	-	0	-
6.1 - d(Marking)	-	0	-
6.1 - c(Marking)	-	0	-
6.1 - b(Marking)	-	0	-
6.1 - a(Marking)	-	0	-
12(Electrical Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-	0	-
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	0	-
9.3(Compression Test (after removal of force) as per caluse 9.3.3 of IS: 9537 (Part 1)-1980)	-	0	-
7.1.2 Fig.1(Maximum outside diameter of conduit)	-	0	For BIS only Per Varity = Rs 15000/- For others Per Varity = Rs 30000/-

20 Jun, 2028

-
Included w.e.f 16.07.2025

2398

Gravitas Laboratories Private Limited, Greater Noida

8182606

IS 1079 (2017)

Hot rolled carbon steel sheet, plate and strip - Specification (Seventh Revision)

All thickness

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(UTM)	-	5000	-
Cl 9(Press)	-	5000	-
Cl 10(Die Press)	-	5000	-
Cl 12(Workmanship)	-	5000	-
Cl 13(Length, Width & Thickness)	-	5000	-
Cl 8(UTM)	-	5000	-
Cl 9(Press)	-	5000	-
Cl 10(Die Press)	-	5000	-
Cl 8(UTM)	-	5000	-
Cl 9(Press)	-	5000	-
Cl 10(Die Press)	-	5000	-
Cl 12(Workmanship)	-	5000	-
Cl 13(Length, Width & Thickness)	-	5000	-
6.1(Carbon %)	-	4000	-
6.1(Manganese %)	-	4000	-
6.1(Phosphorus %)	-	4000	-
6.1(Sulphur %)	-	4000	-
6.1(Silicon %)	-	4000	-
6.1( Copper %)	-	4000	-
6.1( Aluminium %)	-	4000	-
6.1( Nb)	-	4000	-
6.1(V)	-	4000	-
6.1( Ti)	-	4000	-
6.1(Cr)	-	4000	-
6.1(Mo)	-	4000	-
6.1(Ni)	-	4000	-
6.1( Nitrogen%)	-	4000	-
6.1(Microalloying)	-	4000	-
6.1(Carbon %)	-	4000	-
6.1(Manganese %)	-	4000	-
6.1(Phosphorus %)	-	4000	-
6.1(Sulphur %)	-	4000	-
6.1(Silicon %)	-	4000	-
6.1( Copper %)	-	4000	-
6.1( Aluminium %)	-	4000	-
6.1( Nb)	-	4000	-
6.1(V)	-	4000	-
6.1( Ti)	-	4000	-
6.1(Cr)	-	4000	-
6.1(Mo)	-	4000	-
6.1(Ni)	-	4000	-
6.1( Nitrogen%)	-	4000	-
6.1(Microalloying)	-	4000	-
Cl 12(Workmanship)	-	5000	-
Cl 13(Length, Width & Thickness)	-	5000	-
6.1(Carbon %)	-	4000	-
6.1(Manganese %)	-	4000	-
6.1(Phosphorus %)	-	4000	-
6.1(Sulphur %)	-	4000	-
6.1(Silicon %)	-	4000	-
6.1( Copper %)	-	4000	-
6.1( Aluminium %)	-	4000	-
6.1( Nb)	-	4000	-
6.1(V)	-	4000	-
6.1( Ti)	-	4000	-
6.1(Cr)	-	4000	-
6.1(Mo)	-	4000	-
6.1(Ni)	-	4000	-
6.1( Nitrogen%)	-	4000	-
6.1(Microalloying)	-	4000	-
Cl.13(Out of square)	-	5000	-
Cl.13(Flatness)	-	5000	-
Cl.13(Camber)	-	5000	-
Cl.13(Width)	-	5000	-
Cl.13(Thickness)	-	5000	-
Cl. 8.3, Cl. 8.3.1 Table 5 and Table 6(Percentage Elongation After Fracture at 5.65√A Gauge length)	-	5000	-
Cl. 8.3, Cl. 8.3.1 Table 5 and Table 6(Percentage Elongation After Fracture at 80 mm Gauge length)	-	5000	-
Cl. 8.3, Cl. 8.3.1 Table 5 and Table 6(Percentage Elongation After Fracture at 50 mm Gauge length)	-	5000	-
Cl. 8.3, Cl. 8.3.1 Table 6(0.2% Proof Stress/Yield Stress)	-	5000	-
Cl 13(Length, Width & Thickness)	-	5000	-
Cl 12(Workmanship)	-	5000	-
Cl 9(Press)	-	5000	-
Cl 8(UTM)	-	5000	-
7(Material Test)	-	4000	-
9(Bend test)	-	5000	-
14(Calculation of weight)	-	5000	-
Cl 8(UTM)	-	5000	-
Cl 9(Press)	-	5000	-
Cl 12(Workmanship)	-	5000	-
Cl 13(Length, Width & Thickness)	-	5000	-
8, Table 5 & 6(Tensile Strength)	-	5000	-
8, Table 5 & 6(Yield Strength)	-	5000	-
8, Table 5 & 6(Elongation)	-	5000	-
Clause 10(Cuppping Test)	-	5000	-
Clause 12(Freedom from defect)	-	5000	-
Clause 13(Length)	-	5000	-
Clause 7, Table 3, Note 1(Any Instrumental Method/Chemical Method)	-	4000	-
Clause 7, Table 3, Note 1(By Calculation)	-	4000	-
8, Table 5 & 6(Tensile Strength)	-	5000	-
8, Table 5 & 6(Yield Strength)	-	5000	-
8, Table 5 & 6(Elongation)	-	5000	-
Clause 10(Cuppping Test)	-	5000	-
Clause 12(Freedom from defect)	-	5000	-
Clause 13(Length)	-	5000	-
Clause 7, Table 3, Note 1(Boron)	-	4000	-
Clause 7, Table 3, Note 1(B+Ti+Nb+V)	-	4000	-
8, Table 5 & 6(IS 1608 Part 1)	-	5000	-
8, Table 5 & 6(IS 1608 Part 1)	-	5000	-
8, Table 5 & 6(IS 1608 Part 1)	-	5000	-
Clause 10(IS 10175)	-	5000	-
Clause 12(IS 1079)	-	5000	-
Clause 13(IS/ISO 16160)	-	5000	-
Clause 7, Table 3, Note 1(Boron)	-	4000	-
Clause 7, Table 3, Note 1(B+Ti+Nb+V)	-	5000	-
Cl 10(Die Press)	-	5000	-
Cl 10(Die Press)	-	5000	-

19 Nov, 2027

-
Included w.e.f 28.07.2025

2399

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 16733 (2018)

Ferritic-Pearlitic Engineering Steels for Precipitation Hardening from Hot-Working Temperatures

All Grade / Type / Size / Designation

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Manufacturing process)	-	12000	-
5.2, table 3(Chemical composition)	-	8000	-
5.2, table 3(Chemical composition)	-	8000	-
5.3(Structure)	-	1000	-
5.4(Internal soundness)	-	0	-
5.5(Surface quality)	-	1000	-
5.6(Shape, dimension & tolerances)	-	2000	-
6.1(Inspection, testing & conformance of products)	-	100	-
6.2.1(Verification of the mechanical properties)	-	100	-
6.2.2(Testing of the surface quality)	-	100	-
6.2.3(Visual and dimensional inspection)	-	100	-
6.2.4(Retests)	-	100	-
7(Marking)	-	500	-

26 Jul, 2027

-
Included w.e.f 23.07.2025 Excluding Cl. 5.4 Internal Soundness (Optional Tests)

2400

SHRI KRISHNA TEST HOUSE PVT LTD (142)

8185606

IS 16440 (2016)

Stainless steel milk cans - Specification

ALL

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2(Carbon)	-	30000	-
5.2(Sulphur)	-	30000	-
5.2(phosphorus)	-	30000	-
5.2(Manganese)	-	30000	-
5.2(Silicon)	-	30000	-
5.2(Chromium)	-	30000	-
5.2(Nickel)	-	30000	-
5.2(molybdenum)	-	30000	-
3.0(Capacity test)	-	30000	-
6.3(Hardness test)	-	30000	-
6.1(Pressure check for leakage and bulging)	-	30000	-
6.2(Drop test)	-	30000	-
6.4(Dye penetration test)	-	30000	-
"As per Clause 4 & Table 1"(Shape & Dimensions)	-	30000	-
As per Clause 5.4(Thickness of parts)	-	30000	-
As per Clause 5.5(Mass of can (Weight))	-	30000	-
As per Clause 5.6(Construction)	-	30000	-
Clause 5.6.1(Body)	-	30000	-
As per Clause 5.6.2(Handle)	-	30000	-
Clause 5.6.3(Bottom ring)	-	30000	-
Clause 5.6.4(Lid)	-	30000	-
Clause 5.6.6(Finish)	-	30000	-
Clause 5.6.7(Heat treatment and Passivation)	-	30000	-
Clause 6.5(Leakage test)	-	30000	-
Clause 4 & Table 1"(Shape & Dimensions)	-	30000	-
Clause 5.4(Thickness of parts)	-	30000	-
Clause 5.5(Mass of can (Weight))	-	30000	-
Clause 5.6(Construction)	-	30000	-
Clause 5.6.1(Body)	-	30000	-
Clause 5.6.2(Handle)	-	30000	-
Clause 5.6.3(Bottom ring)	-	30000	-
Clause 5.6.6(Finish)	-	30000	-
Clause 5.6.7(Heat treatment and Passivation)	-	30000	-
Clause 6.5(Leakage test)	-	30000	-

13 May, 2028

-
Included w.e.f 31.07.2025

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number