BIS - LIMS (Laboratory Information Management System)

DELHI TEST HOUSE (50) KUNDLI SONIPAT

PLOT NO 50 phase IV sector 57 hsiidc industrial area kundli, Sonipat, Sonipat, Haryana, 131028

9810442016 ag@delhitesthouse.com

Scope List

Reset

101 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 16046 : Part 2 (2018)

Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes ” Safety Requirements for Portable Sealed Secondary Cells and for Batteries Made from Them for Use in Portable Applications Part 2 Lithium Systems ( Second Revision )

100000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Parameter Measurement Tolerances)	-	500	Battery- 115000 Cell- 130000
5(General Safety Considerations)	-	250	Battery- 115000 Cell- 130000
5.1(General)	-	250	Battery- 115000 Cell- 130000
5.2(Insulation and Wiring)	-	3000	Battery- 115000 Cell- 130000
5.3(Venting)	-	1000	Battery- 115000 Cell- 130000
5.4(Temperature, Voltage and Current Management)	-	1000	Battery- 115000 Cell- 130000
5.5(Terminal Contacts)	-	1000	Battery- 115000 Cell- 130000
5.6(Assembly of Cells into batteries)	-	5000	Battery- 115000 Cell- 130000
5.7(Quality Plan)	-	500	Battery- 115000 Cell- 130000
5.8(Battery Safety Components)	-	500	Battery- 115000 Cell- 130000
6(Type Test and Sample Size)	-	11000	Battery- 115000 Cell- 130000
7(Specific requirements and tests)	-	1000	Battery- 115000 Cell- 130000
7.1(Charging procedure for test purposes)	-	30000	Battery- 115000 Cell- 130000
7.2(Intended Use)	-	33000	Battery- 115000 Cell- 130000
7.3(Reasonably foreseeable misuse)	-	63000	Battery- 115000 Cell- 130000
8(Information for safety)	-	1000	Battery- 115000 Cell- 130000
8.1(General)	-	1000	Battery- 115000 Cell- 130000
8.2(Small Cell and battery safety information)	-	1000	Battery- 115000 Cell- 130000
9(Marking)	-	500	Battery- 115000 Cell- 130000
9.1(Cell Marking)	-	500	Battery- 115000 Cell- 130000
9.2(Battery Marking)	-	1000	Battery- 115000 Cell- 130000
9.3(Caution for ingestion of small cells and batteries)	-	1000	Battery- 115000 Cell- 130000
9.4(Other information)	-	1000	Battery- 115000 Cell- 130000
10(Packaging)	-	500	Battery- 115000 Cell- 130000
clause 7.3.1 of IS 16047: Part 3(Discharge performance at 20 °C (rated capacity))	-	30000	Battery- 115000Cell- 130000

23 Jun, 2028

-
Exclusion : Clause 7.3.1 of IS 16047: Part 3

IS 14286 : Part 1 : Sec 4 (2023)

Terrestrial photovoltaic PV modules Design qualification and type approval Part 1-4: Special requirements for testing of thin-film CuInGASSe2 based photovoltaic PV modules Third Revision

1600000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-8(Major visual defects)	-	2500	-
Cl-11.1(Visual inspection (MQT 01))	-	2000	-
Cl-11.2(Maximum power determination (MQT 02))	-	7000	-
Cl-11.3(Insulation test (MQT 03))	-	15000	-
Cl-11.4(Measurement of temperature coefficients (MQT 04))	-	100000	-
Cl-11.5(Measurement of nominal module operating temperature (NMOT) (MQT 05))	-	5000	-
Cl-11.6(Performance at STC (MQT 06.1) and NMOT (MQT 06.2)	-	2500	-
Cl-11.7(Performance at low irradiance (MQT 07))	-	8500	-
Cl-11.8(Outdoor exposure test (MQT 08))	-	45000	-
Cl-11.9(Hot-spot endurance test (MQT 09))	-	120000	-
Cl-11.10(UV preconditioning test (MQT 10))	-	120000	-
Cl-11.11(Thermal cycling test (MQT 11))	-	155000	-
Cl-11.12(As per IEC 61215-1:2016)	-	75000	-
Cl-11.13(Damp heat test (MQT 13))	-	155000	-
Cl-11.14(Robustness of terminations test (MQT 14))	-	15000	-
Cl-11.15(Robustness of terminations test (MQT 14))	-	20000	-
Cl-11.16(Static mechanical load test (MQT 16))	-	45000	-
Cl-11.17(Hail test (MQT 17))	-	50000	-
Cl-11.18(Bypass diode testing (MQT 18))	-	70000	-
Cl-11.19(Stabilization (MQT 19))	-	90000	-
5(Marking and documentation)	-	2500	-
11.20(Cyclic (dynamic) mechanical load test (MQT 20))	-	25000	-
11.21(Potential induced degradation test (MQT 21))	-	400000	-
11.22(Bending test (MQT 22))	-	70000	-

23 Jun, 2028

-
Included w.e.f 09.03.2026

IS 14286 : Part 1 : Sec 3 (2023)

Terrestrial photovoltaic PV modules Design qualification and type approval Part 1-3: Special requirements for testing of thin-film amorphous silicon based photovoltaic PV modules Third Revision

1600000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-8(Major visual defects)	-	2500	-
Cl-11.1(Visual inspection)	-	2000	-
Cl-11.2(Maximum power determination)	-	7000	-
Cl-11.3(Insulation test)	-	15000	-
Cl-11.4(Measurement of temperature coefficients)	-	100000	-
Cl-11.5(Measurement of nominal module operating temperature)	-	5000	-
Cl-11.6(Performance at STC and NMOT)	-	2500	-
Cl-11.7(Performance at low irradiance)	-	8500	-
Cl-11.8(Outdoor exposure test)	-	45000	-
Cl-11.9(Hot-spot endurance test)	-	120000	-
Cl-11.10(UV preconditioning test)	-	120000	-
Cl-11.11(Thermal cycling test)	-	155000	-
Cl-11.12(Humidity-freeze test)	-	75000	-
Cl-11.13(Damp heat test)	-	155000	-
Cl-11.14(Robustness of terminations test)	-	15000	-
Cl-11.15(Wet leakage current test)	-	20000	-
Cl-11.16(Static mechanical load test)	-	45000	-
Cl-11.17(Hail test)	-	50000	-
Cl-11.18(Bypass diode testing)	-	70000	-
Cl-11.19(Stabilization)	-	90000	-
5(Marking and documentation)	-	2500	-
11.20(Cyclic (dynamic) mechanical load test (MQT 20))	-	25000	-
11.21(Potential induced degradation test (MQT 21))	-	400000	-
11.22(Bending test (MQT 22))	-	70000	-

23 Jun, 2028

-
Included w.e.f 09.03.2026

IS 14286 : Part 1 : Sec 2 (2023)

Terrestrial photovoltaic PV modules Design qualification and type approval Part 1-2: Special requirements for testing of thin-film Cadmium Telluride CdTe based photovoltaic PV modules Third Revision

1600000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-8(Major visual defects)	-	2500	-
Cl-11.1(Visual inspection)	-	2000	-
Cl-11.2(Maximum power determination)	-	7000	-
Cl-11.3(Insulation tes)	-	15000	-
Cl-11.4(Measurement of temperature coefficients)	-	100000	-
Cl-11.5(Measurement of nominal module operating temperature)	-	5000	-
Cl-11.6(Performance at STC and NMOT)	-	2500	-
Cl-11.7(Performance at low irradiance)	-	8500	-
Cl-11.8(Outdoor exposure test)	-	45000	-
Cl-11.9(Hot-spot endurance test)	-	120000	-
Cl-11.10(UV preconditioning test)	-	120000	-
Cl-11.11(Thermal cycling test)	-	155000	-
Cl-11.12(Humidity-freeze test)	-	75000	-
Cl-11.13(Damp heat test)	-	155000	-
Cl-11.14(Robustness of terminations test)	-	15000	-
Cl-11.15(Wet leakage current test)	-	20000	-
Cl-11.16(Static mechanical load test)	-	45000	-
Cl-11.17(Hail test)	-	50000	-
Cl-11.18(Bypass diode testing)	-	70000	-
Cl-11.19(Stabilization)	-	90000	-
5(Marking and documentation)	-	2500	-
11.20(Cyclic (dynamic) mechanical load test (MQT 20))	-	25000	-
11.21(Potential induced degradation test (MQT 21))	-	400000	-
11.22(Bending test (MQT 22))	-	70000	-
Cl-8(Major visual defects)	-	-	-
Cl-11.1(Visual inspection)	-	-	-
Cl-11.2(Maximum power determination)	-	-	-
Cl-11.3(Insulation tes)	-	-	-
Cl-11.4(Measurement of temperature coefficients)	-	-	-
Cl-11.5(Measurement of nominal module operating temperature)	-	-	-
Cl-11.6(Performance at STC and NMOT)	-	-	-
Cl-11.7(Performance at low irradiance)	-	-	-
Cl-11.8(Outdoor exposure test)	-	-	-
Cl-11.9(Hot-spot endurance test)	-	-	-
Cl-11.10(UV preconditioning test)	-	-	-
Cl-11.11(Thermal cycling test)	-	-	-
Cl-11.12(Humidity-freeze test)	-	-	-
Cl-11.13(Damp heat test)	-	-	-
Cl-11.14(Robustness of terminations test)	-	-	-
Cl-11.15(Wet leakage current test)	-	-	-
Cl-11.16(Static mechanical load test)	-	-	-
Cl-11.17(Hail test)	-	-	-
Cl-11.18(Bypass diode testing)	-	-	-
Cl-11.19(Stabilization)	-	-	-
5(Marking and documentation)	-	-	-
11.20(Cyclic (dynamic) mechanical load test (MQT 20))	-	-	-
11.21(Potential induced degradation test (MQT 21))	-	-	-
11.22(Bending test (MQT 22))	-	-	-

23 Jun, 2028

-
Included w.e.f 09.03.2026

IS 16544 (2016)

All glass evacuated tubes solar water heating system

70000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Pre-Conditioning Test)	-	15000	-
6.2.1 (Annex - B)(Exterior Test)	-	2000	-
6.2.2 (Annex - C)(Leakage Test)	-	5000	-
6.2.3 (Annex - D)(Stagnation Test)	-	8000	-
6.2.4 (Annex - E)(External Thermal Shock Test)	-	5000	-
6.2.5 (Annex - F)(Internal Thermal Shock Test)	-	5000	-
6.2.6(Thermal Performance Test)	-	20000	-
6.2.7()	-	5000	-
5(General Requirements)	-	5000	-

23 Jun, 2028

-
-

IS 16542 (2016)

Direct insertion type storage water tank for all glass evacuated tubes solar collector - Specification

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.3(Ideal Heating Test)	-	2000	-
8.2(Leakage Test)	-	500	-
8.4(Integral Test)	-	2000	-
8.5(Performance Test)	-	1000	-
7.6(Thermal Shock Test for Inner Sealing)	-	1500	-
8.1(Measurement of Storage Water Tank Capacity)	-	1000	-
6(GENERAL REQUIREMENTS)	-	500	-
7.7(Thermal Shock Test for outer Sealing)	-	1500	-

23 Jun, 2028

-
-

IS 12933 : Part 1 (2003)

Solar flat plate collector - Specification: Part 1 requirements (Second Revision)

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Components: The various components of solar flat plate collector shall be as specified in IS 12933 (Part 2))	-	1500	-
4(Components: The various components of solar flat plate collector shall be as specified in IS 12933 (Part 2))	-	1500	-
4(Components: The various components of solar flat plate collector shall be as specified in IS 12933 (Part 2))	-	1500	-
4(Components: The various components of solar flat plate collector shall be as specified in IS 12933 (Part 2))	-	1500	-
4(Components: The various components of solar flat plate collector shall be as specified in IS 12933 (Part 2))	-	1500	-
4(Components: The various components of solar flat plate collector shall be as specified in IS 12933 (Part 2))	-	1500	-
4(Components: The various components of solar flat plate collector shall be as specified in IS 12933 (Part 2))	-	1500	-
4(Components: The various components of solar flat plate collector shall be as specified in IS 12933 (Part 2))	-	1500	-
4(Components: The various components of solar flat plate collector shall be as specified in IS 12933 (Part 2))	-	1500	-
4(Components: The various components of solar flat plate collector shall be as specified in IS 12933 (Part 2))	-	1500	-
4(Components: The various components of solar flat plate collector shall be as specified in IS 12933 (Part 2))	-	1500	-
7.1.1(Static Pressure Leakage Test)	-	1500	-
7.2.1(Outdoor No Flow Exposure Test )	-	1500	-
7.2.2(External Thermal Shock Test )	-	1500	-
7.2.2(Internal Thermal Shock Test )	-	1500	-
7.2.4(Rain Penetration Test)	-	1500	-
7.2.5(Impact Resistance Test)	-	1500	-
7.2.6(Thermal Efficiency Test)	-	15000	-
7.2.7(Determination of the Time Constant )	-	1500	-
7.2.8(Incident Angle Modifier Test)	-	10000	-
7.2.8(Incident Angle Modifier Test)	-	10000	-
4(Cover Plate, Material ( Cl. 4 of IS 12933 (Part 2))	-	1500	-
4(Cover Plate, Material ( Cl. 4 of IS 12933 (Part 2))	-	1500	-
4(Cover Plate, Material ( Cl. 4 of IS 12933 (Part 2))	-	1500	-
4(Collector box, Material (Cl.6.1 of IS 12933 (Part 2))	-	1500	-
4(Collector box, i) Aluminium: a) Channel section for sides (Cl.6.2 of IS 12933 (Part 2))	-	1500	-
4(Collector box, i) Aluminium: b) Sheet for bottom (Cl.6.2 of IS 12933 (Part 2))	-	1500	-
4(Collector box, i) Aluminium: c) Support for glass retaining, (Cl.6.2 of IS 12933 (Part 2))	-	1500	-
4(Collector box, i) Aluminium: d) Sheet for entire body(Cl.6.2 of IS 12933 (Part 2))	-	1500	-
4(Collector box,ii) Fibre glass (Cl.6.2 of IS 12933 (Part 2))	-	1500	-
4(Collector box, iii) Galvanized/stainless steel sheet (Cl.6.2 of IS 12933 (Part 2))	-	1500	-
4(Collector box, iv) CRCA/HRC (Cl.6.2 of IS 12933 (Part 2))	-	1500	-
4(Absorber (Cl.9.1.3 of IS 12933 (Part 2))	-	1500	-
4(Absorber -Temperature test (Cl.9.1.4 of IS 12933 (Part 2))	-	1500	-
4(Riser and Headers- Static Pressure Leakage Test ( Cl. 9.2.1 of IS 12933 (Part 2))	-	1500	-
4(Bonding Between Riser and Sheet ( Cl. 9.2.2.1 of IS 12933 (Part 2))	-	1500	-
4(Bonding Between Riser and Sheet ( Cl. 9.2.2.2 of IS 12933 (Part 2))	-	1500	-
4(Collector Box Insulation- Back and Side Insulation ( Cl. 10.1 of IS 12933 (Part 2))	-	1500	-
4(Collector Box Insulation- Back and Side Insulation ( Cl. 10.2 of IS 12933 (Part 2))	-	1500	-
4(Workmanship and Finish (Cl.7.1 of IS 12933 (Part 2))	-	1500	-
4(Gaskets and Grommets- Materials ( Cl. 11.1 of IS 12933 (Part 2))	-	1500	-
4(Gaskets and Grommets- Materials ( Cl.11.2 of IS 12933 (Part 2))	-	1500	-
4(Thermal shock Test -Gaskets and Grommets (Cl.12.1 of IS 12933 (Part 2))	-	1500	-
5(Shape and Dimensions)	-	2000	-
6.1(Assembley and Workmanship)	-	1000	-
6.2(Assembley and Workmanship)	-	1000	-
6.3(Assembley and Workmanship)	-	1000	-
6.4(Assembley and Workmanship)	-	1000	-
4(Workmanship and Finish, b) Electroplated zinc coating (Cl.7.2 of IS 12933 (Part 2))	-	1500	-
4(Workmanship and Finish, b) Electroplated zinc coating (Cl.7.2 of IS 12933 (Part 2))	-	1500	-
4(Workmanship and Finish, c) Powder coating (Cl.7.2 of IS 12933 (Part 2))	-	1500	-
4(Workmanship and Finish, c) Powder coating (Cl.7.2 of IS 12933 (Part 2))	-	1500	-
4(Fabrication - Aluminium Box (Cl.8.1 of IS 12933 (Part 2))	-	1500	-
4(Fabrication - Fibre glass boxes (Cl.8.2 of IS 12933 (Part 2))	-	1500	-
4(Fabrication- Al/CRCA/HRC//Galvanised steel /any other material (Cl.8.3 of IS 12933 (Part 2))	-	1500	-
4(Absorber (Cl.9.1 of IS 12933 (Part 2))	-	1500	-
4(Absorber (Cl.9.1.1 of IS 12933 (Part 2))	-	1500	-
4(Absorber (Cl.9.1.2 of IS 12933 (Part 2))	-	1500	-
5(SHAPE AND DIMENSIONS)	-	2000	-

23 Jun, 2028

-
-

IS/IEC 61727 (2004)

Photovoltaic PV Systems ” Characteristics of the Utility Interface

100000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4(Utility compatibility)	-	50000		-
5(Personnel safety and equipment protection)	-	50000		-

23 Jun, 2028

-
Included w.e.f 05.01.2026

IS 2167 (2024)

Commercial Beverage Coolers - Classification, Requirements and Test Conditions (Third Revision)

190000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Classification according to temperature)	-	500	-
Cl-5.2.1.1(Strength and rigidity)	-	1000	-
Cl-5.2.1.2(Pipes and connections)	-	1000	-
Cl-5.2.2(Materials)	-	1000	-
Cl-5.2.3(Thermal insulation)	-	1000	-
Cl-5.2.4(Refrigerating system)	-	1000	-
Cl-5.2.5(Electrical components)	-	1000	-
Cl-6.2.1(General)	-	0	-
Cl-6.2.2(Seal test for doors and lids)	-	5000	-
Cl-6.2.3(Test on durability of door and lid.)	-	48000	-
Cl-6.2.4(Linear dimensions, areas and volumes)	-	3000	-
Cl-6.3.2(Test room condition)	-	0	-
Cl-6.3.3(M-can)	-	0	-
Cl-6.3.4(Preparation of test commercial beverage cooler and general test procedures)	-	8000	-
Cl-6.3.5(Loading the commercial beverage cooler)	-	10000	-
Cl-6.3.6(Running in period)	-	5000	-
Cl-6.3.7(Stable conditions)	-	10000	-
Cl-6.3.8(Lighting and night-covers)	-	1000	-
Cl-6.3.9(Power supply)	-	1000	-
Cl-6.3.10(Testing several commercial beverage coolers in the same room)	-	0	-
Cl-6.3.11(Test with M-cans)	-	40000	-
Cl-6.3.12(Water vapour condensation test)	-	38000	-
Cl-6.3.13(Calculation of specific energy consumption (SEC).)	-	5000	-
Cl-6.3.14(Lighting test)	-	5000	-
Cl-6.4(Test report)	-	2500	-
Cl-7(Marking)	-	2000	-

23 Jun, 2028

-
Included w.e.f 05.01.2026

IS 16103 : Part 1 (2025)

LED Modules for General Lighting Part 1 Safety Specifications (First Revision)

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-6(Marking)	-	1000	-
Cl-7.1(Integral terminals)	-	1000	-
Cl-7.2(Terminals other than integral terminals)	-	1000	-
Cl-8(Earthing)	-	2000	-
Cl-9(Protection against accidental contact with live parts)	-	2000	-
Cl-10(Moisture resistance and insulation)	-	7000	-
Cl-11(Electric strength)	-	2500	-
Cl-12.1(Fault conditions- General)	-	1500	-
Cl-12.2(Overpower condition)	-	1500	-
Cl-13(Conformity testing during manufacture)	-	0	-
Cl-15(Creepage distances and clearances)	-	1000	-
Cl-16(Screws, current-carrying parts and connections)	-	1000	-
Cl-17(Resistance to heat, fire and tracking)	-	5000	-
Cl-18(Resistance to corrosion)	-	1000	-
Cl-19(Information for luminaire design)	-	0	-
Cl-20.1(Heat management- General)	-	2500	-
Cl-20.2(Thermal interface material)	-	2500	-
Cl-20.3(Heat protection)	-	2500	-

23 Jun, 2028

-
Included w.e.f 09.10.2025 Exclusion: Cl-21.1 (UV radiation), Cl-21.2 (Blue light hazard)

IS 16047 : Part 3 (2018)

Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes ” Secondary Lithium Cells and Batteries for Portable Applications Part 3 Prismatic and Cylindrical Lithium Secondary Cells, and Batteries Made From Them ( First Revision )

200000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Cell Designation and Marking)	-	5000	-
7.1, 7.2(Charging Procedure for Test Purpose)	-	10000	-
7.3.1(Discharge Performance at 20°C (Rated Capacity))	-	10000	-
7.3.2("Discharge Performance at -20°C ")	-	15000	-
7.3.3(High Rate Discharge Performance at 20°C)	-	10000	-
7.4(Charge (capacity) Retention and Recovery)	-	10000	-
7.5(Charge (Capacity) Recovery After Long Term Storage)	-	40000	-
7.6.2(Endurance In Cycles at a Rate of 0.2It A)	-	40000	-
7.6.3("Endurance in Cycles at a Rate of 0.5It A (Accelerated Test Procedure) ")	-	40000	-
7.7(Battery Internal Resistance)	-	20000	-

23 Jun, 2028

-
Included w.e.f 09.10.2025 Exclusion: Cl 7.8 (Electrostatic Discharge (ESD))

IS 16822 (2019)

Secondary cells and batteries containing alkaline or other non - Acid electrolytes - Secondary lithium cells and batteries for use in industrial applications

500000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking and Designation)	-	5000	-
6, 6.1, 6.2(Charging Procedures For Test Purposes)	-	25000	-
6.3, 6.3.1(Discharge Performance, Discharge Performance at +25°C)	-	50000	-
6.3.2(Discharge performance at Low Temperature)	-	50000	-
6.3.3(High Rate Permissible Current)	-	50000	-
6.4(Charge (Capacity) Retention and Recovery)	-	70000	-
6.5(Cell and Battery Internal Resistance)	-	50000	-
6.6(Endurance)	-	200000	-

23 Jun, 2028

-
Included w.e.f. 29.09.2025

IS 16805 (2018)

Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes ” Safety Requirements for Secondary Lithium Cells and Batteries, for Use in Industrial Applications

275000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(General Safety Considerations)	-	5000	-
7.1(Charging Procedures For Test Purposes)	-	10000	-
7.2.1(External Short-Circuit Test)	-	25000	-
7.2.2(Impact Test)	-	25000	-
7.2.3(Drop Test)	-	25000	-
7.2.4(Thermal Abuse Test)	-	25000	-
7.2.5(Overcharge Test)	-	25000	-
7.2.6(Forced Discharge Test)	-	25000	-
7.3.3(Propagation Test)	-	30000	-
8(Battery System Safety)	-	35000	-
9(Information For Safety)	-	5000	-
10(Marking and Designation)	-	5000	-
7.3.2(Internal short-circuit test)	-	35000	-

23 Jun, 2028

-
Included w.e.f 09.10.2025

IS 16242 : Part 1 (2025)

Uninterruptible power systems UPS Part 1 Safety requirements (first revision)

800000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.2(Fault and abnormal conditions)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-4.3(Short-circuit and overload protection)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-4.3.101(AC input current)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-4.3.102(Transformer protection)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-4.3.103(AC input short-circuit current)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-4.3.104(Protection of the energy storage device)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-4.3.105(Unsynchronised load transfer)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-4.4(Protection against electric shock)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-4.4.2.2.2(Selection tables for contact area and skin humidity condition)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-4.4.3.3(Protection by means of enclosures or barriers- Openings)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-4.4.7.1.1(Influencing factors)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-4.4.7.1.2(Pollution degree)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-4.4.7.1.3(Overvoltage category (OVC))	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-4.4.7.7(PWB spacings for functional insulation)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-4.4.9(Capacitor discharge)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-4.5.2(Service access areas)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-4.6(Protection against fire and thermal hazards)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-4.6.2.2(Components within a circuit representing a fire hazard)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-4.6.3.1(General)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-4.6.3.2(Flammability of enclosure materials)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-4.6.3.3.2(Openings in the top and side of fire enclosures)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-4.6.4.1(Temperature limits- Internal parts)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl- 4.6.5(Limited power sources)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-4.7(Protection against mechanical hazards)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Clause 4(Protection against hazards)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-4.7.101(Protection in service access area)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Clause 5(Test requirements)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-4.8 .101(Equipment with multiple sources of supply- General)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Clause 5.2.2(Mechanical tests)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Clause 5.2.3(Electrical tests)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-4.9(Protection against environmental stresses)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-4.10(Protection against sonic pressure hazards)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Clause 5.2.4("Abnormal operation tests")	-	30000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-4.11(Wiring and connections)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Clause 5.2.5(Material tests)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Clause 5.2.6(Environmental tests)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-4.11.101.1(Non-detachable cords- Cord guard)	-	10000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Clause 5.2.7(Hydrostatic pressure test)	-	10000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-4.11.101.2(Cord anchorages and strain relief)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Clause 6(Information and marking requirements)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-4.101.1(Emergency switching (disconnect) device)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Clause 6.1.101(Durability)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-4.101.2(Normal disconnect devices)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-4.102.1(Stored energy source- General)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-4.102.2(Accessibility and maintainability)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-4.102.3(Distance between battery cells)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl- 4.102.5(Electrolyte spillage)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl- 4.102.6(Ventilation and hydrogen concentration)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl- 4.102.8.1(Overcurrent and earth fault protection)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl- 4.102.8.2(Location of protective devices)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-4.102.8.3(Rating of protective devices)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-4.103(UPS connection to telecommunication lines)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-5.1.5.3(Operating parameters for tests)	-	15000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-5.1.7(Test overview)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-5.2.2.2(Non-accessibility test)	-	9000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-5.2.2.4.4(Drop test)	-	10000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-4.8.102(Backfeed protection)	-	10000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl- 4.102.7(Charging voltages)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-5.2.2.6.101(Wall or ceiling mounted equipment test)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-5.2.2.6.102(Rack mounted equipment test)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-5.2.2.101(Cord guard test)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-5.2.3.9(Limited power source test)	-	20000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-5.2.3.10(Temperature rise test)	-	100000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-5.2.3.101.1(Backfeed protection test- General)	-	15000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-5.2.3.101.2(Test for pluggable UPS)	-	15000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-5.2.3.101.3(Test for permanently connected UPS)	-	10000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-5.2.3.101.4(Method to simulate the load-induced change of reference potential for pluggable UPS)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-5.2.3.101.5(Solid-state backfeed protection)	-	20000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-5.2.3.102(Input current test)	-	20000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-5.2.3.103(Short-time withstand current test)	-	15000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-5.2.3103.3(Input port short-time withstand current rating)	-	15000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-5.2.3.104(Transformer protection test)	-	20000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl- 5.2.3.105(Unsynchronised load transfer test)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-5.2.4.1(Abnormal operation and simulated faults tests- General)	-	70000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-5.2.6.4(Vibration test)	-	75000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-5.2.6.5(Salt mist test)	-	50000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-5.2.6.6(Dust and sand test)	-	20000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-6(Information and marking requirements)	-	1000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000

23 Jun, 2028

-
Included w.e.f.11.09.2025

IS 17092 (2019)

Electrical energy storage systems: safety requirements

1375000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 5(CYBER SECURITY)	-	10000	-
Clause 6(CONSTRUCTION-NON-METALLIC MATERIALS)	-	100000	-
Clause 7("METALLIC PARTS RESISTANCE TO CORROSION")	-	25000	-
Clause 8(ENCLOSURES ANCompliance shall be determined in accordance with clause 12 of IS/IEC 60529. D GUARDING OF HAZARDOUS PARTS)	-	10000	-
Clause 9(GENERAL ELECTRICAL SAFETY AND WALK-IN SYSTEMS)	-	10000	-
Clause 10(WIRING AND ELECTRICAL SUPPLY CONNECTIONS)	-	10000	-
Clause 12(ELECTRICAL SPACINGS AND SEPARATION OF CIRCUITS)	-	20000	-
Clause 13(INSULATION LEVELS AND PROTECTIVE GROUNDING)	-	10000	-
Clause 14("SAFETY ANALYSIS AND CONTROL SYSTEMS ")	-	10000	-
Clause 15(REMOTE CONTROLS)	-	10000	-
Clause 16(COMMUNICATION SYSTEMS)	-	10000	-
Clause 17(HEATING AND COOLING SYSTEMS)	-	10000	-
Clause 18(CONTAINMENT OF MOVING PARTS)	-	10000	-
Clause 19(HAZARDOUS FLUID CONTAINMENT)	-	10000	-
Clause 20(COMBUSTIBLE CONCENTRATIONS)	-	15000	-
Clause 21(FIRE DETECTION AND SUPPRESSION)	-	10000	-
Clause 22(UTILITY GRID INTERACTION)	-	150000	-
Clause 23(ENERGY STORAGE SYSTEM TECHNOLOGIES)	-	100000	-
Clause 23.1(Electrochemical Energy Storage Systems)	-	150000	-
Clause 23.2(Chemical Energy Storage Systems)	-	75000	-
Clause 23.3(Mechanical Energy Storage Systems)	-	10000	-
Clause 23.4(Thermal Energy Storage Systems)	-	10000	-
Clause 24(PERFORMANCE)	-	50000	-
Clause 25(NORMAL OPERATIONS TEST)	-	100000	-
Clause 26(DIELECTRIC VOLTAGE WITHSTAND TEST)	-	20000	-
Clause 27(IMPULSE TEST)	-	30000	-
Clause 28(EQUIPMENT GROUNDING AND BONDING TEST)	-	15000	-
Clause 29(INSULATION RESISTANCE TEST)	-	15000	-
Clause 30(CONTAINMENT OF MOVING PARTS)	-	10000	-
Clause 30.1(Over Speed Qualification Test)	-	15000	-
Clause 30.2(Faulted Securement Qualification Test)	-	15000	-
Clause 31(LEAKAGE TESTS)	-	20000	-
Clause 32(STRENGTH TESTS)	-	10000	-
Clause 32.2(Hydraulic Strength Test)	-	10000	-
Clause 32.3(Pneumatic Strength Test)	-	10000	-
Clause 33(SPECIAL ENVIRONMENT INSTALLATIONS)	-	100000	-
Clause 33.2(Outdoors Installations Subject to Moisture Exposure)	-	20000	-
Clause 33.3(Outdoor Installation Near Marine Environments)	-	15000	-
Clause 33.4(Installation in Seismic Environments)	-	70000	-
Clause 34("DIELECTRIC VOLTAGE WITHSTAND TEST")	-	15000	-
Clause 35("GROUNDING AND BONDING SYSTEM CHECK")	-	10000	-
Clause 36(MAXIMUM ABNORMAL OPERATING SPEED)	-	10000	-
Clause 37(MARKINGS)	-	20000	-
Clause 38(GENERAL)	-	5000	-
Annex C(GENERAL BATTERY SAFETY CONSIDERATIONS)	-	5000	-
Clause D-1(GENERAL)	-	1250	-
Clause D-2(INFORMATION)	-	1250	-
Clause D-3(REQUIREMENTS APPLICABLE TO ALL DOCUMENTATION)	-	1250	-
Clause D-4(BASIC INFORMATION)	-	1250	-
Clause D-5(INSTALLATION DIAGRAM)	-	1250	-
Clause D-6("BLOCK (SYSTEM) DIAGRAMS AND FUNCTION DIAGRAMS")	-	1250	-
Clause D-7(CIRCUIT DIAGRAMS)	-	1250	-
Clause D-8(OPERATING MANUAL)	-	1250	-
Clause D-9(MAINTENANCE MANUAL)	-	1200	-
Clause D-10(PARTS LIST)	-	1200	-
Clause D-10(INFORMATION)	-	0	-

23 Jun, 2028

-
Included w.e.f 22.09.2025

IS/IEC 61730 : PART 2 (2016)

Photovoltaic (PV) module safety qualification: Part 2 requirements for testing (First Revision)

1500000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 10.2(Visual inspection MST 01)	-	5000	-
Clause 10.3(Performance at STC MST 02)	-	10000	-
Clause 10.4(Maximum powerdetermination MST 03)	-	10000	-
Clause 10.5(Insulation thickness test MST 04)	-	10000	-
Clause 10.6(Durability of markings MST 05)	-	5000	-
Clause 10.7(Sharp edge test MST 06)	-	100000	-
Clause 10.8(Bypass diode functionality test MST 07)	-	15000	-
Clause 10.9(Accessibility test MST 11)	-	30000	-
Clause 10.10(Cut susceptibility test MST 12)	-	20000	-
Clause 10.11(Continuity test of equipotential bonding MST 13)	-	15000	-
Clause 10.12(Impulse voltage test MST 14)	-	30000	-
Clause 10.13(Insulation test MST 16)	-	15000	-
Clause 10.14(Wet leakage current test MST 17)	-	30000	-
Clause 10.15(Temperature test MST 21)	-	15000	-
Clause 10.16(Hot-spot endurance test MST 22)	-	15000	-
Clause 10.17(Fire test MST 23)	-	50000	-
Clause 10.18(Ignitability test MST 24)	-	50000	-
Clause 10.19(Bypass diode thermal test MST 25)	-	50000	-
Clause 10.20(Reverse current overload test MST 26)	-	20000	-
Clause 10.21(Module breakage test MST 32)	-	10000	-
Clause 10.22(Screw connections test MST 33)	-	10000	-
Clause 10.23(Static mechanical load test MST 34)	-	15000	-
Clause 10.24(Peel test MST 35)	-	15000	-
Clause 10.25(Lap shear strength test MST 36)	-	10000	-
Clause 10.26(Materials creep test MST 37)	-	30000	-
Clause 10.27(Robustness of terminations test MST 42)	-	20000	-
Clause 10.28(Thermal cycling test MST 51)	-	220000	-
Clause 10.29(Humidity freeze test MST 52)	-	120000	-
Clause 10.30(Damp heat test MST 53)	-	220000	-
Clause 10.31(UV test MST 54)	-	80000	-
Clause 10.32(Cold conditioning MST 55)	-	100000	-
Clause 10.33(Dry heat conditioning MST 56)	-	100000	-

23 Jun, 2028

-
-

IS/IEC 61730 : PART 1 (2023)

Photovoltaic (PV) Module Safety Qualification Part 1 Requirements for Construction (Second Revision)

190000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Classification, applications and intended use)	-	7500	-
6.2(Marking and documentation)	-	12500	-
6.3.2(Internal wiring)	-	3500	-
6.3.3(External wiring and cables)	-	3500	-
6.3.4(Module overcurrent protection rating)	-	3500	-
6.3.5(Connectors)	-	3500	-
6.3.6(Junction boxes)	-	3500	-
6.3.7(Frontsheets and backsheets)	-	3500	-
6.3.8(Insulation barriers)	-	3500	-
6.3.9(Electrical connections)	-	3500	-
6.3.10(Encapsulants)	-	3500	-
6.3.11(Bypass diodes)	-	3500	-
6.4(Mechanical and electromechanical connections)	-	45000	-
6.4.2(Screw connections)	-	7500	-
6.4.3(Rivets)	-	7500	-
6.4.4(Thread-cutting screws)	-	7500	-
6.4.5(Form/press/tight fit)	-	7500	-
6.4.6(Connections by adhesives)	-	7500	-
6.4.7(Other connections)	-	7500	-
6.5.2(Polymeric materials)	-	2500	-
6.5.2.3(Flammability)	-	2500	-
6.5.3.2(Current-carrying parts)	-	2500	-
6.5.4(Adhesives)	-	2500	-
6.6.2(Protection against accessibility to hazardous live parts)	-	8500	-
6.6.3(Insulation coordination)	-	8500	-
6.6.3.2.1(Pollution degree)	-	3000	-
6.6.3.3(Creepage distance)	-	3000	-
6.6.3.4(Clearance)	-	3000	-
6.6.4(Distance through functional and relied upon insulation)	-	3000	-
6.6.4.3(Cemented joints)	-	3000	-
6.6.4.4(Distance through functional insulation)	-	3000	-
5(Classification, applications and intended use)	-	7500	-
6.2(Marking and documentation)	-	12500	-
6.3.2(Internal wiring)	-	3500	-
6.3.3(External wiring and cables)	-	3500	-
6.3.4(Module overcurrent protection rating)	-	3500	-
6.3.5(Connectors)	-	3500	-
6.3.6(Junction boxes)	-	3500	-
6.3.7(Frontsheets and backsheets)	-	3500	-
6.3.8(Insulation barriers)	-	3500	-
6.3.9(Electrical connections)	-	3500	-
6.3.10(Encapsulants)	-	3500	-
6.3.11(Bypass diodes)	-	3500	-
6.4(Mechanical and electromechanical connections)	-	45000	-
6.4.2(Screw connections)	-	7500	-
6.4.3(Rivets)	-	7500	-
6.4.4(Thread-cutting screws)	-	7500	-
6.4.5(Form/press/tight fit)	-	7500	-
6.4.6(Connections by adhesives)	-	7500	-
6.4.7(Other connections)	-	7500	-
6.5.2(Polymeric materials)	-	2500	-
6.5.2.3(Flammability)	-	2500	-
6.5.3.2(Current-carrying parts)	-	2500	-
6.5.4(Adhesives)	-	2500	-
6.6.2(Protection against accessibility to hazardous live parts)	-	8500	-
6.6.3(Insulation coordination)	-	8500	-
6.6.3.2.1(Pollution degree)	-	3000	-
6.6.3.3(Creepage distance)	-	3000	-
6.6.3.4(Clearance)	-	3000	-
6.6.4(Distance through functional and relied upon insulation)	-	3000	-
6.6.4.3(Cemented joints)	-	3000	-
6.6.4.4(Distance through functional insulation)	-	3000	-

23 Jun, 2028

-
Included w.e.f 04.09.2025

IS/IEC 61730 : PART 2 (2023)

Photovoltaic (PV) Module - Safety Qualification Part 2 Requirements for Testing (Second Revision)

1445000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.2(Visual inspection MST 01)	-	5000	-
10.3(Performance at STC MST 02)	-	10000	-
10.4(Maximum power determination MST 03)	-	10000	-
10.5(Insulation thickness test MST 04)	-	10000	-
10.6(Durability of markings MST 05)	-	5000	-
10.7(Sharp edge test MST 06)	-	100000	-
10.8(Bypass diode functionality test MST 07)	-	15000	-
10.9(Accessibility test MST 11)	-	30000	-
10.1(Cut susceptibility test MST 12)	-	20000	-
10.11(Continuity test of equipotential bonding MST 13)	-	15000	-
10.12(Impulse voltage test MST 14)	-	30000	-
10.13(Insulation test MST 16)	-	15000	-
10.14(Wet leakage current test MST 17)	-	30000	-
10.16(Hot-spot endurance test MST 22)	-	15000	-
10.17(Fire test MST 23)	-	50000	-
10.18(Ignitability test MST 24)	-	50000	-
10.19(Bypass diode thermal test MST 25)	-	50000	-
10.20(Reverse current overload test MST 26)	-	20000	-
10.21(Module breakage test MST 32)	-	10000	-
10.22(Screw connections test MST 33)	-	10000	-
10.23(Static mechanical load test MST 34)	-	15000	-
10.24(Peel test MST 35)	-	15000	-
10.25(Lap shear strength test MST 36)	-	10000	-
10.26(Materials creep test MST 37)	-	30000	-
10.27(Robustness of terminations test MST 42)	-	20000	-
10.28(Thermal cycling test MST 51)	-	220000	-
10.29(Humidity freeze test MST 52)	-	120000	-
10.30(Damp heat test MST 53)	-	220000	-
10.31(UV test MST 54)	-	80000	-
10.32(Cold conditioning test MST 55)	-	100000	-
10.33(Dry heat conditioning test MST 56)	-	100000	-
10.34(Evaluation of insulation coordination MST 57)	-	15000	-

23 Jun, 2028

-
Included w.e.f 21.08.2025

IS 17550 : Part 3 (2025)

Household Refrigerating Appliances - Characteristics and Methods Of Test Part 3 Energy Consumption and Volume (First Revision)

150000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4.1, Annex A(set up for energy consumption)	-	0	-
Clause 4.2, Annex B(Steady state power consumption)	-	0	-
Clause 4.3, Annex C(Defrost and Recovery Energy and Temperature Change)	-	0	-
Clause 4.4, Annex D(Defrost Frequency)	-	0	-
Clause 4.5, Annex E(Number of Test Points and Interpolation)	-	0	-
Clause 4.6, Annex G(Load Processing Efficiency)	-	0	-
Clause 4.7, Annex F(Specified Auxiliaries)	-	0	-
Clause 4.8, Annex H(Volume determination)	-	25000	-
Clause 4.8.1, Annex H(Rated total volume)	-	0	-
Clause 5, 5.1, 5.2 Table 1(TARGET TEMPERATURES FOR ENERGY DETERMINATION)	-	0	-
Clause 6, 6.1 to 6.8(DETERMINATION OF ENERGY CONSUMPTION)	-	125000	-

23 Jun, 2028

-
Included w.e.f. 28.07.2025

IS/IEC 62368 : Part 1 (2023)

Audio Video Information and Communication Technology Equipment - Part 1: Safety Requirements (Second Revision)

225000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(General- materials, components)	-	500	-
Cl-4.2(Energy source classifications)	-	500	-
Cl-4.3(Protection against energy sources)	-	500	-
Cl-4.4(Safeguards)	-	500	-
Cl-4.5(Explosion)	-	500	-
Cl-4.6(Fixing of conductors and conductive parts)	-	500	-
Cl-4.7(Equipment for direct insertion into mains socket-outlets)	-	1000	-
Cl-4.8(Equipment containing coin or button cell batteries)	-	2000	-
Cl-4.9(Likelihood of fire or shock due to entry of conductive objects)	-	500	-
Cl-4.10(Components requirements)	-	500	-
Cl-5.1(General- Electrically-caused injury)	-	300	-
Cl-5.2(Classification and limits of electrical energy sources)	-	2000	-
Cl-5.3(Protection against electrical energy sources)	-	3000	-
Cl-5.5(Components as safeguards)	-	2000	-
Cl-5.6(Protective conductor)	-	2000	-
Cl-5.7(Prospective touch voltage, touch current and protective conductor current)	-	1500	-
Cl-5.8(Backfeed safeguard in battery backed up supplies)	-	1000	-
Cl-6.1(General- Electrically-caused fire)	-	500	-
Cl-6.2(Classification of power sources and potential ignition sources)	-	2000	-
Cl-6.3(Safeguards against fire under normal operating conditions and abnormal operating conditions)	-	2500	-
Cl-6.4(Safeguards against fire under single fault conditions)	-	2500	-
Cl-6.5(Internal and external wiring)	-	2500	-
Cl-7.1(General- Injury caused by hazardous substances)	-	500	-
Cl-7.2(Reduction of exposure to hazardous substances)	-	2000	-
Cl-7.3(Ozone exposure)	-	500	-
Cl-7.4(Use of personal safeguards or personal protective equipment (PPE)	-	500	-
Cl-7.5(Use of instructional safeguards and instructions)	-	500	-
Cl-8.1(General- Mechanically-caused injury)	-	500	-
Cl-8.2(Mechanical energy source classifications)	-	1000	-
Cl-8.3(Safeguards against mechanical energy sources)	-	500	-
Cl-8.4(Safeguards against parts with sharp edges and corners)	-	2000	-
Cl-8.5(Safeguards against moving parts)	-	2000	-
Cl-8.6(Stability of equipment)	-	2500	-
Cl-8.7(Equipment mounted to a wall, ceiling or other structure)	-	2500	-
Cl-8.8(Handle strength)	-	1000	-
Cl-8.9(Wheels or casters attachment requirements)	-	1000	-
Cl-8.10(Carts, stands, and similar carriers)	-	1500	-
Cl-8.11(Mounting means for slide-rail mounted equipment (SRME))	-	2000	-
Cl-9.1(General-Thermal burn injury)	-	500	-
Cl-9.2(Thermal energy source classifications)	-	3000	-
Cl-9.3(Touch temperature limits)	-	4500	-
Cl-9.4(Safeguards against thermal energy sources)	-	500	-
Cl-9.5(Requirements for safeguards)	-	500	-
Cl-9.6(Requirements for wireless power transmitters)	-	4500	-
Cl-10.1(General-Radiation)	-	0	-
Cl-5.4(Insulation materials and requirements)	-	3000	-
Cl-10.2(Radiation energy source classifications)	-	0	-
Cl-10.3(Safeguards against laser radiation)	-	0	-
Cl-10.4("Safeguards against optical radiation from lamps and lamp systems (including LED types)")	-	0	-
Cl-10.5(Safeguards against X-radiation)	-	0	-
Cl-10.6(Safeguards against acoustic energy sources)	-	0	-
Annex A(Examples of equipment within the scope of this document)	-	100	-
Annex B(General- Normal operating condition tests, abnormal operating condition tests and single fault condition tests)	-	500	-
Annex B-2(Normal operating conditions)	-	5000	-
Annex B-3(Simulated abnormal operating conditions)	-	5000	-
Annex B-4(Simulated single fault conditions)	-	5000	-
Annex D-1(Impulse test generators)	-	2000	-
Annex D-2(Antenna interface test generator)	-	2000	-
Annex D-3(Electronic pulse generator)	-	2000	-
Annex E-1(Electrical energy source classification for audio signals)	-	3000	-
Annex E-2(Audio signals used during test)	-	3000	-
Annex E-3(Operating conditions of equipment containing an audio amplifier)	-	3000	-
Annex F-1(General-Equipment markings, instructions, and instructional safeguards)	-	500	-
Annex F-2(Letter symbols and graphical symbols)	-	500	-
Annex F-3(Equipment markings)	-	500	-
Annex F-4(Instructions)	-	500	-
Annex F-5(Instructional safeguards)	-	500	-
Annex G-1(Switches)	-	300	-
Annex G-2(Relays)	-	300	-
Annex G-3(Protective devices)	-	300	-
Annex G-4(Connectors)	-	300	-
Annex G-5(Wound components)	-	300	-
Annex G-6(Wire insulation)	-	300	-
Annex G-7(Mains power supply cords and interconnection cables)	-	300	-
Annex G-8(Varistors)	-	300	-
Annex G-9(Integrated circuit (IC) current limiters)	-	300	-
Annex G-10(Resistors)	-	300	-
Annex G-11(Capacitors and RC units)	-	300	-
Annex G-12(Optocouplers)	-	300	-
Annex G-13(Printed boards)	-	300	-
Annex G-14(Coatings on component terminals)	-	300	-
Annex G-15(Pressurized liquid filled components or LFC assemblies)	-	300	-
Annex G-16(IC that includes a capacitor discharge function (ICX))	-	300	-
Annex H-1(General- Criteria for telephone ringing signals)	-	500	-
Annex H-2(Method A)	-	2000	-
Annex H-3(Method B)	-	4000	-
Annex I(Overvoltage categories (see IEC 60364-4-44))	-	500	-
Annex J-1(General-Insulated winding wires for use without interleaved insulation)	-	1000	-
Annex J-2(Type tests)	-	5000	-
Annex J-3(Testing during manufacturing)	-	2000	-
Annex K-1(General- Safety interlocks)	-	500	-
Annex K-2(Components of the safety interlock safeguard mechanism)	-	500	-
Annex K-3(Inadvertent change of operating mode)	-	500	-
Annex K-4(Interlock safeguard override)	-	500	-
Annex K-5(Fail-safe)	-	500	-
Annex K-6(Mechanically operated safety interlocks)	-	500	-
Annex K-7(Interlock circuit isolation)	-	500	-
Annex L-1(General requirements)	-	300	-
Annex L-2(Permanently connected equipment)	-	300	-
Annex L-3()	-	300	-
Annex L-4(Single-phase equipment)	-	300	-
Annex L-5(Three-phase equipment)	-	300	-
Annex L-6(Switches as disconnect devices)	-	300	-
Annex L-7(Plugs as disconnect devices)	-	300	-
Annex L-8(Multiple power sources)	-	300	-
Annex L-9(Compliance criteria)	-	300	-
Annex M-1(General requirements)	-	1000	-
Annex M-2(Safety of batteries and their cells)	-	1000	-
Annex M-3(Protection circuits for batteries provided within the equipment)	-	5000	-
Annex M-4(Additional safeguards for equipment containing a secondary lithium battery)	-	5000	-
Annex M-5(Risk of burn due to short-circuit during carrying)	-	7500	-
Annex M-6(Safeguards against short-circuits)	-	1500	-
Annex M-7(Risk of explosion from lead acid and NiCd batteries)	-	1000	-
Annex M-8("Protection against internal ignition from external spark sources of rechargeable batteries with aqueous electrolyte")	-	1000	-
Annex M-9(Preventing electrolyte spillage)	-	500	-
Annex M-10(Instructions to prevent reasonably foreseeable misuse)	-	500	-
Annex N(Electrochemical potentials (V))	-	500	-
Annex O(Measurement of creepage distances and clearances)	-	1000	-
Annex P-1(General-Safeguards against conductive objects)	-	500	-
Annex P-2(Safeguards against entry or consequences of entry of a foreign object)	-	3000	-
Annex P-3(Safeguards against spillage of internal liquids)	-	500	-
Annex P-4(Metallized coatings and adhesives securing parts)	-	2000	-
Annex Q-1(Limited power source)	-	5000	-
Annex Q-2(Test for external circuits – paired conductor cable)	-	3000	-
Annex S-1(Flammability test for fire enclosure and fire barrier materials of equipment where the steady state power does not exceed 4 000 W)	-	4500	-
Annex S-2(Flammability test for fire enclosure and fire barrier integrity)	-	4500	-
Annex S-3(Flammability tests for the bottom of a fire enclosure)	-	2500	-
Annex S-4(Flammability classification of materials)	-	500	-
Annex S-5(Flammability test for fire enclosure materials of equipment with a steady state power exceeding 4 000 W)	-	4500	-
Annex S-6(Grille covering material, cloth, and reticulated foam)	-	2000	-
Annex T-1(General-Mechanical strength tests)	-	500	-
Annex T-2(Steady force test, 10 N)	-	1500	-
Annex T-3(Steady force test, 30 N)	-	1500	-
Annex T-4(Steady force test, 100 N)	-	2000	-
Annex T-5(Steady force test, 250 N)	-	3000	-
Annex T-6(Enclosure impact test)	-	2000	-
Annex T-7(Drop test)	-	2000	-
Annex T-8(Stress relief test)	-	3000	-
Annex T-9(Glass impact test)	-	3000	-
Annex T-10(Glass fragmentation test)	-	2000	-
Annex T-11(Test for telescoping or rod antennas)	-	1500	-
Annex V-1(Accessible parts of equipment)	-	2500	-
Annex V-2(Accessible part criterion)	-	500	-
Annex W(Comparison of terms introduced in this document)	-	100	-
Annex X("Alternative method for determining clearances for insulation in circuits connected to an AC mains not exceeding 420 V peak (300 V RMS)")	-	3000	-
Annex Y-1(General- Construction requirements for outdoor enclosures)	-	500	-
Annex Y-2(Resistance to UV radiation)	-	0	-
Annex Y-3(Resistance to corrosion)	-	5000	-
Annex Y-4(Gaskets)	-	3000	-
Annex Y-5(Protection of equipment within an outdoor enclosure)	-	3000	-
Annex Y-6(Mechanical strength of enclosures)	-	2500	-

23 Jun, 2028

-
Included w.e.f. 30.07.2025 Exclusion: Annex C-2 (UV light conditioning test) Annex R (Limited short-circuit test) Annex U ("Mechanical strength of CRTs and protection against the effects of implosion") Annex Y-2 (Resistance to UV radiation) Cl-10.1 (General-Radiation) Cl-10.2 (Radiation energy source classifications) Cl-10.3 (Safeguards against laser radiation) Cl-10.4 ("Safeguards against optical radiation from lamps and lamp systems (including LED types)") Cl-10.5 (Safeguards against X-radiation) Cl-10.6 (Safeguards against acoustic energy sources)

IS 16893 : Part 3 (2018)

Secondary Lithium - lon Cells For the Propulsion of Electric Road Vehicles Part 3 Safety Requirements

175000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(General Charge Conditions)	-	5000	-
5.2(Capacity)	-	5000	-
5.3(SOC Adjustment)	-	5000	-
6.2.1(Vibration)	-	35000	-
6.2.2(Mechanical Shock)	-	15000	-
6.2.3(Crush)	-	10000	-
6.3.1(High Temperature Endurance)	-	10000	-
6.3.2(Temperature Cycling)	-	30000	-
6.4.1(External Short Circuit)	-	10000	-
6.4.2(Overcharge)	-	10000	-
6.4.3(Forced Discharge)	-	10000	-
6.4.3(Forced Discharge)	-	10000	-
6.4.4(Internal short circuit test)	-	30000	-

23 Jun, 2028

-
Included w.e.f.28.07.2025

IS 16543 (2024)

All-glass evacuated solar collector tubes - Specification (First revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4.1(Structure of All-Glass Evacuated Solar Collector Tube)	-	200	-
Cl 4.2 & table 1(Outer Diameter of Cover Glass Tube)	-	200	-
Cl 4.2 & table 1(Outer Diameter of Inner Glass Tube Including Coating)	-	200	-
Cl 4.2 & table 1(The Thickness of Cover and Inner Glass Tube)	-	200	-
Cl 4.2 & table 1(Tube Length)	-	200	-
Cl 4.2 & table 1(Sealed off Part Length)	-	200	-
Cl 4.3(Absorber Area for Different Tube Sizes)	-	200	-
Cl 4.4(Solar Selective Absorbing Coating)	-	200	-
Cl 4.5(Calculation for Number of Tubes for The Heating System)	-	200	-
Cl 5.1.1(Transmittance ratio ( material))	-	300	-
Cl 5.1.2(Bubble & crack (material))	-	300	-
Cl 5.1.3(Knots (material))	-	300	-
Cl 5.1.4(Solar absorbing ratio (material))	-	300	-
Cl 5.2.1(Scratch length and visibility)	-	300	-
Cl 5.2.2(Appearance of selective coating)	-	300	-
Cl 5.2.3(Colour fading area)	-	300	-
Cl 5.2.4(Strut member)	-	300	-
Cl 5.2.5(The inner and cover tube at the open end)	-	300	-
Cl 5.2.6(Length of an all-glass evacuated solar collector tube)	-	300	-
Cl 5.2.7(Bending of the all-glass evacuated solar collector tube)	-	300	-
Cl 5.2.8(Cross-section of the open end)	-	300	-
Cl 5.2.9(Sealed end)	-	300	-
Cl 7.2.2(Uniformity)	-	500	-
Cl 7.4(Stagnation Performance Parameter Test)	-	1000	-
Cl 7.5(Stagnation Solar Irradiation Test)	-	1000	-
Cl 7.6(Average Heat Loss Coefficient Test)	-	1000	-
Cl 7.7(Vacuum Performance Test)	-	1500	-
Cl 7.8(Resistance to Thermal Shock Test)	-	1000	-
Cl 7.9(Resistance to Impact Test)	-	1000	-
Cl 7.10(0 Resistance to Internal Pressure Test)	-	1000	-
Cl 7.11(Absorptivity and Emissivity Test of the Selective Coating)	-	1000	-
Cl 9(Marking)	-	300	-

23 Jun, 2028

-
Included w.e.f.20.05.2025

IS 17550 : Part 2 (2024)

Household Refrigerating Appliances - Characteristics and Test Methods Part 2 Performance Requirements (First Revision)

340000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Storage Test)	-	38000	-
7(Cooling Capacity Test)	-	38000	-
8(Freezing Capacity Test)	-	38000	-
9("Automatic Ice-Making Capacity Test")	-	38000	-
Cl. No.4.6 & Annex A(PULL-DOWN TEST)	-	50000	-
Cl. No.4.6(b) & Annex B("Wine Storage Appliances And Compartments; Storage Test")	-	45000	-
Cl. No.4.6(C) & AnnexC("Temperature Rise Test ")	-	46000	-
Cl. No.4.6(d) & Annex D("Water Vapour Condensation Test ")	-	47000	-

23 Jun, 2028

-
Included w.e.f.29.05.2025

IS 17550 : Part 1 (2024)

Household Refrigerating Appliances - Characteristics and Test Methods Part 1 General Requirements (First Revision)

230000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(MARKING)	-	2000	-
8(MATERIALS, DESIGN, AND MANUFACTURE)	-	30000	-
9(Testing The Air Tightness Of Door Or Lid Seal(S))	-	8000	-
10(Testing The Opening Force Of Door(S) Or Lid(S))	-	7000	-
11(Testing The Durability Of Hinges And Handles Of Door(S) And Lid(S)	-	20000	-
12(Testing The Mechanical Strength Of Shelves And Similar Components)	-	8000	-
14(Ice-Making Test (If Applicable))	-	15000	-
15(Test For Absence Of Odour And Taste)	-	15000	-
16(Safety Requirements)	-	125000	-

23 Jun, 2028

-
Included w.e.f.29.05.2025

IS 12933 : Part 2 (2003)

Solar flat plate collector - Specification: Part 2 components (Second Revision)

4000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12.1.1(Thermal Shock Test)	-	500	-
11(MATERIALS)	-	200	-
10(BACK AND SIDE INSULATION)	-	500	-
9.2.2(Bonding Between Riser and Sheet)	-	500	-
9.2.1(Static Pressure Leakage Test)	-	500	-
9.1.4(Temperature Test)	-	500	-
8(FABRICATION)	-	300	-
7(WORKMANSHIP AND FINISH)	-	500	-
5.1(Transmittance Test)	-	500	-
12.1.1(Thermal Shock Test)	-	500	-
11(MATERIALS)	-	200	-
10(BACK AND SIDE INSULATION)	-	500	-
9.2.2(Bonding Between Riser and Sheet)	-	500	-
9.2.1(Static Pressure Leakage Test)	-	500	-
9.1.4(Temperature Test)	-	500	-
8(FABRICATION)	-	300	-
7(WORKMANSHIP AND FINISH)	-	500	-
5.1(Transmittance Test)	-	500	-

23 Jun, 2028

-
Included w.e.f.31.07.2025

IS 16543 (2016)

All glass evacuated solar collector tubes - Specification

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.3 (Annex - A)(Stagnation Performance Parameter Test)	-	1000	-
7.4 (Annex - B)(Stagnation Solar Irradiance Test)	-	1500	-
7.5 (Annex - C)(Average Heat Loss Coefficient Test)	-	1500	-
7.6 (Annex - D-1)(Air Pressure Test Inside the Vacuum Jacket)	-	1500	-
7.6 (Annex - D-2)(Vacuum Quality Test)	-	1500	-
7.7 (Annex - E)(Resistance to Thermal Shock Test)	-	2000	-
7.8 (Annex - F)(Resistance to Impact Test)	-	1000	-
7.9 (Annex - G)(Resistance to Internal Pressure Test)	-	1500	-
7.10 (Annex - H-2)(Absorptivity Test of Selective Coating)	-	1000	-
7.10 (Annex - H-3)(Emissivity Test of selective coating)	-	1000	-
7.1(Dimensions)	-	500	-
7.2(Appearance and Dimensions)	-	500	-
5(GENERAL REQUIREMENTS)	-	500	-

23 Jun, 2028

-
Included w.e.f.30.04.2025

IS 16270 (2023)

Secondary cells and batteries for solar photovoltaic application - General requirements and methods of test

400000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Photovoltaic Energy System)	-	0	-
Cl-4.2(Secondary Cells and Batteries)	-	0	-
Cl-4.3(General Operating Conditions)	-	0	-
Cl-4.3.8(Storage)	-	0	-
Cl-4.3.9(Operating Temperature)	-	0	-
Cl-5.1(Mechanical Endurance)	-	0	-
Cl-5.2(Charge Efficiency)	-	0	-
Cl-5.3(Deep Discharge Protection)	-	0	-
Cl-5.4(Marking)	-	1500	-
Cl-5.5(Safety)	-	0	-
Cl-5.6(Documentation)	-	0	-
Cl-6(Functional characteristice)	-	0	-
Cl-7(General test conditions)	-	0	-
Cl-8.1(Capacity Test)	-	50000	-
Cl-8.2(Endurance Test)	-	80000	-
Cl-8.3(Charge Retention Test)	-	70000	-
Cl-8.4(Cycle Endurance in Photovoltaic Application (Extreme Conditions))	-	140000	-
Cl-8.5(Sulphation Test (Applicable for Lead Acid Batteries only))	-	28500	-
Cl-8.6(Water Loss Test (Valid for Flooded Lead Acid Batteries only))	-	30000	-
Cl-9.1(Type Tests)	-	0	-
Cl-9.2(Acceptance Test)	-	0	-
4.3.7.1(Specific gravity)	-	0	-
Cl-4.1(Photovoltaic Energy System)	-	0	-
Cl-4.2(Secondary Cells and Batteries)	-	0	-
Cl-4.3(General Operating Conditions)	-	0	-
Cl-4.3.8(Storage)	-	0	-
Cl-4.3.9(Operating Temperature)	-	0	-
Cl-5.1(Mechanical Endurance)	-	0	-
Cl-5.2(Charge Efficiency)	-	0	-
Cl-5.3(Deep Discharge Protection)	-	0	-
Cl-5.4(Marking)	-	1500	-
Cl-5.5(Safety)	-	0	-
Cl-5.6(Documentation)	-	0	-
Cl-6(Functional characteristice)	-	0	-
Cl-7(General test conditions)	-	0	-
Cl-8.1(Capacity Test)	-	50000	-
Cl-8.2(Endurance Test)	-	80000	-
Cl-8.3(Charge Retention Test)	-	70000	-
Cl-8.4(Cycle Endurance in Photovoltaic Application (Extreme Conditions))	-	140000	-
Cl-8.5(Sulphation Test (Applicable for Lead Acid Batteries only))	-	28500	-
Cl-8.6(Water Loss Test (Valid for Flooded Lead Acid Batteries only))	-	30000	-
Cl-9.1(Type Tests)	-	0	-
Cl-9.2(Acceptance Test)	-	0	-
4.3.7.1(Specific gravity)	-	0	-

23 Jun, 2028

-
Included w.e.f.26.06.2025

IS 4250 (2025)

Electric Food-Mixers (Liquidizers and Grinders) and Centrifugal Juicers ï¿½ Specification ( Second Revision )

44700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General Requirements)	-	500	-
Cl-5(General Conditions for the tests)	-	500	-
Cl-6(Classification)	-	750	-
Cl-7(Marking)	-	1500	-
Cl-8(Safety Requirements)	-	14700	Facility of Switch Endurance Test Setup as per Clause 24.1.3 of IS 302 (P-2/SEC-14) is not available.
Cl-9(Endurance fpr motor and base assembly)	-	10000	-
Cl-10.2("Grinding Coffee (for Machines that Have a Dry Grinding Arrangement)")	-	3000	-
Cl-10.3(Whisking Egg Whites (for Machines that have Whisking Egg Arrangement))	-	3000	-
Cl-10.4(Idli Batter)	-	4000	-
Cl-10.5(Operational Tests for Juicers)	-	4000	-
Cl-11(Temperature Withstand Test for Bowl)	-	750	-
Cl-12.1(Test for Switches)	-	0	-
Cl-13(Strength of Assembly)	-	2000	-
Cl-14.2, 14.3 Table-2 (i)(Protection against access to live parts)	-	7000	-
Cl-14.2, Table-2 (ii)(Power input and current)	-	1500	-
Cl-14.2, 14.3 Table-2 (iii)(Leakage current and electric strength at operating temperature)	-	2000	-
Cl-14.2, Table-2 (iv)(Moisture resistance)	-	3000	-
Cl-14.2, Table-2 (v)(Leakage current and electric strength)	-	3000	-
Cl-14.2, 14.3 Table-2 (vi)(Provision for earthing)	-	1500	-
Cl-4(General Requirements)	-	500	-
Cl-5(General Conditions for the tests)	-	500	-
Cl-6(Classification)	-	750	-
Cl-7(Marking)	-	1500	-
Cl-8(Safety Requirements)	-	14700	-
Cl-9(Endurance fpr motor and base assembly)	-	10000	-
Cl-10.2("Grinding Coffee (for Machines that Have a Dry Grinding Arrangement)")	-	3000	-
Cl-10.3(Whisking Egg Whites (for Machines that have Whisking Egg Arrangement))	-	3000	-
Cl-10.4(Idli Batter)	-	4000	-
Cl-10.5(Operational Tests for Juicers)	-	4000	-
Cl-11(Temperature Withstand Test for Bowl)	-	750	-
Cl-13(Strength of Assembly)	-	2000	-
Cl-14.2, 14.3 Table-2 (i)(Protection against access to live parts)	-	7000	-
Cl-14.2, Table-2 (ii)(Power input and current)	-	1500	-
Cl-14.2, 14.3 Table-2 (iii)(Leakage current and electric strength at operating temperature)	-	2000	-
Cl-14.2, Table-2 (iv)(Moisture resistance)	-	3000	-
Cl-14.2, Table-2 (v)(Leakage current and electric strength)	-	3000	-
Cl-14.2, 14.3 Table-2 (vi)(Provision for earthing)	-	1500	-
Cl-4(General Requirements)	-	500	-
Cl-5(General Conditions for the tests)	-	500	-
Cl-6(Classification)	-	750	-
Cl-7(Marking)	-	1500	-
Cl-8(Safety Requirements)	-	14700	Facility of Switch Endurance Test Setup as per Clause 24.1.3 of IS 302 (P-2/SEC-14) is not available.
Cl-9(Endurance fpr motor and base assembly)	-	10000	-
Cl-10.2("Grinding Coffee (for Machines that Have a Dry Grinding Arrangement)")	-	3000	-
Cl-10.3(Whisking Egg Whites (for Machines that have Whisking Egg Arrangement))	-	3000	-
Cl-10.4(Idli Batter)	-	4000	-
Cl-10.5(Operational Tests for Juicers)	-	4000	-
Cl-11(Temperature Withstand Test for Bowl)	-	750	-
Cl-13(Strength of Assembly)	-	2000	-
Cl-14.2, 14.3 Table-2 (i)(Protection against access to live parts)	-	7000	-
Cl-14.2, Table-2 (ii)(Power input and current)	-	1500	-
Cl-14.2, 14.3 Table-2 (iii)(Leakage current and electric strength at operating temperature)	-	2000	-
Cl-14.2, Table-2 (iv)(Moisture resistance)	-	3000	-
Cl-14.2, Table-2 (v)(Leakage current and electric strength)	-	3000	-
Cl-14.2, 14.3 Table-2 (vi)(Provision for earthing)	-	1500	-

23 Jun, 2028

-
Included w.e.f.25.06.202025 Exclusion (EMI/EMC) Cl 19.11.4.1 to Cl 19.11.4.7

IS 14286 : Part 1 (2023)

Terrestrial Photovoltaic PV Modules Design Qualification and Type Approval Part 1: Test Requirements (Third Revision)

1600000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Visual inspection (MQT 01))	-	2000	-
4.2(Maximum power determination (MQT 02))	-	7000	-
4.3(Insulation test (MQT 03))	-	15000	-
4.4(Measurement of temperature coefficients (MQT 04))	-	105000	-
4.5(Placeholder section, formerly NMOT)	-	5000	-
4.6(Performance at STC (MQT 06.1))	-	2500	-
4.7(Performance at low irradiance (MQT 07))	-	8500	-
4.8(Outdoor exposure test (MQT 08))	-	45000	-
4.9(Hot-spot endurance test (MQT 09))	-	120000	-
4.10(UV preconditioning test (MQT 10))	-	120000	-
4.11(Thermal cycling test (MQT 11))	-	155000	-
4.12(2 Humidity-freeze test (MQT 12))	-	75000	-
4.13(Damp heat test (MQT 13))	-	155000	-
4.14(Robustness of terminations (MQT 14))	-	15000	-
4.15(5 Wet leakage current test (MQT 15))	-	20000	-
4.16(Static mechanical load test (MQT 16))	-	45000	-
4.17(Hail test (MQT 17))	-	50000	-
4.18(Bypass diode testing (MQT 18))	-	70000	-
4.19(Stabilization (MQT 19))	-	90000	-
4.20(Cyclic (dynamic) mechanical load test (MQT 20))	-	25000	-
4.21(Potential induced degradation test (MQT 21))	-	400000	-
4.22(Bending test (MQT 22))	-	70000	-

23 Jun, 2028

-
Included w.e.f.07.03.2025

IS/IEC 61683 (1999)

Photovoltaic systems - Power conditioners - Procedure for measuring efficiency

111000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Efficiency calculations)	-	25000	-
6(Efficiency test circuits)	-	25000	-
7(Loss measurement)	-	25000	-
Annex A(Power conditioner description)	-	1000	-
Annex B(Power efficiency and conversion factor)	-	2500	-
Annex C(Weighted average energy efficiency)	-	2500	-
Annex D(Derivation of efficiency tolerance in Table 2)	-	1000	-
4(Efficiency measurement conditions)	-	25000	-
4.1(DC power source for testing)	-	500	-
4.2(Temperature)	-	500	-
4.3(Output voltage and frequency)	-	500	-
4.4(Input voltage)	-	500	-
4.5(Ripple and distortion)	-	500	-
4.6(Resistive loads/utility grid)	-	500	-
4.7(Reactive loads)	-	500	-
4.8(Resistive plus non-linear loads)	-	250	-
4.9(Complex loads)	-	250	-

23 Jun, 2028

-
Included w.e.f.07.03.2025

1
2
3
Next
Last

Bureau of Indian Standards

The National Standards Body of India

DELHI TEST HOUSE (50) KUNDLI SONIPAT

PLOT NO 50 phase IV sector 57 hsiidc industrial area kundli, Sonipat, Sonipat, Haryana, 131028

9810442016 ag@delhitesthouse.com

Scope List