BIS - LIMS (Laboratory Information Management System)

DELHI TEST HOUSE (50) KUNDLI SONIPAT

PLOT NO 50 phase IV sector 57 hsiidc industrial area kundli, Sonipat, Sonipat, Haryana, 131028

9810442016 ag@delhitesthouse.com

Scope List

Reset

97 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 16170 : Part 1 (2014)

Photovoltaic (PV) module performance testing and energy rating: Part 1 irradiance and temperature performance measurements and power rating

700000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8(Irradiance and Temperature Measurements and power rating)	-	650000	-
9(Rating of power)	-	50000	There is no testing in clause 9 of this standard and is done on the basis of calculations only.
8(Irradiance and Temperature Measurements and power rating)	-	650000	-
9(Rating of power)	-	50000	There is no testing in clause 9 of this standard and is done on the basis of calculations only.

23 Jun, 2028

-
Included w.e.f.16.12.2024

IS 14286 : Part 1 : Sec 1 (2023)

Terrestrial photovoltaic PV modules Design qualification and type approval Part 1-1: Special requirements for testing of crystalline silicon photovoltaic PV modules Third Revision

2005000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-8(Major visual defects)	-	6000	-
Cl-11.1(Visual inspection)	-	2000	-
Cl-11.2(Maximum power determination)	-	7000	-
Cl-11.3(Insulation test)	-	20000	-
Cl-11.4(Measurement of temperature coefficients)	-	110000	-
Cl-11.5(Measurement of nominal module operating temperature)	-	5000	-
Cl-11.6(Performance at STC)	-	2500	-
Cl-11.7(Performance at low irradiance)	-	10000	-
Cl-11.8(Outdoor exposure test)	-	50000	-
Cl-11.9(Hot-spot endurance test)	-	125000	-
Cl-11.10(UV preconditioning test)	-	125000	-
Cl-11.11(Thermal cycling test)	-	160000	-
Cl-11.12(Humidity-freeze test)	-	80000	-
Cl-11.13(Damp heat test)	-	160000	-
Cl-11.14(Robustness of terminations test)	-	15000	-
Cl-11.15(Wet leakage current tes)	-	25000	-
Cl-11.16(Static mechanical load test)	-	50000	-
Cl-11.17(Hail test)	-	50000	-
Cl-11.18(Bypass diode thermal test)	-	75000	-
Cl-11.19(Stabilization)	-	95000	-
Cl-8(Major visual defects)	-	6000	-
Cl-11.1(Visual inspection)	-	2000	-
Cl-11.2(Maximum power determination)	-	7000	-
Cl-11.3(Insulation test)	-	20000	-
Cl-11.4(Measurement of temperature coefficients)	-	110000	-
Cl-11.5(Measurement of nominal module operating temperature)	-	5000	-
Cl-11.6(Performance at STC)	-	2500	-
Cl-11.7(Performance at low irradiance)	-	10000	-
Cl-11.8(Outdoor exposure test)	-	50000	-
Cl-11.9(Hot-spot endurance test)	-	125000	-
Cl-11.10(UV preconditioning test)	-	125000	-
Cl-11.11(Thermal cycling test)	-	160000	-
Cl-11.12(Humidity-freeze test)	-	80000	-
Cl-11.13(Damp heat test)	-	160000	-
Cl-11.14(Robustness of terminations test)	-	15000	-
Cl-11.15(Wet leakage current tes)	-	25000	-
Cl-11.16(Static mechanical load test)	-	50000	-
Cl-11.17(Hail test)	-	50000	-
Cl-11.18(Bypass diode thermal test)	-	75000	-
Cl-11.19(Stabilization)	-	95000	-
5(Marking and documentation)	-	10000	-
11.20(Cyclic (dynamic) mechanical load test (MQT 20))	-	25000	-
11.21(Potential induced degradation test (MQT 21))	-	400000	-
11.22(Bending test (MQT 22))	-	70000	-
Cl-8(Major visual defects)	-	6000	-
Cl-11.1(Visual inspection)	-	2000	-
Cl-11.2(Maximum power determination)	-	7000	-
Cl-11.3(Insulation test)	-	20000	-
Cl-11.4(Measurement of temperature coefficients)	-	110000	-
Cl-11.5(Measurement of nominal module operating temperature)	-	5000	-
Cl-11.6(Performance at STC)	-	2500	-
Cl-11.7(Performance at low irradiance)	-	10000	-
Cl-11.8(Outdoor exposure test)	-	50000	-
Cl-11.9(Hot-spot endurance test)	-	125000	-
Cl-11.10(UV preconditioning test)	-	125000	-
Cl-11.11(Thermal cycling test)	-	160000	-
Cl-11.12(Humidity-freeze test)	-	80000	-
Cl-11.13(Damp heat test)	-	160000	-
Cl-11.14(Robustness of terminations test)	-	15000	-
Cl-11.15(Wet leakage current tes)	-	25000	-
Cl-11.16(Static mechanical load test)	-	50000	-
Cl-11.17(Hail test)	-	50000	-
Cl-11.18(Bypass diode thermal test)	-	75000	-
Cl-11.19(Stabilization)	-	95000	-
5(Marking and documentation)	-	10000	-
11.20(Cyclic (dynamic) mechanical load test (MQT 20))	-	25000	-
11.21(Potential induced degradation test (MQT 21))	-	400000	-
11.22(Bending test (MQT 22))	-	70000	-

23 Jun, 2028

-
Included w.e.f.26.11.2024

IS 4159 (2021)

Mineral Filled Sheathed Heating Elements

11600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
"Cl. 6 IS 4159:2021"(Classification)	-	600	-
"Cl. 8 IS 4159:2021"(Protection against access to live parts)	-	600	-
"Cl. 9 IS 4159:2021"(Starting of motor operated appliances)	-	1000	-
"Cl. 10 IS 4159:2021"(Power Input and Current)	-	500	-
"Cl. 11 IS 4159:2021"(Heating)	-	600	-
"Cl. 13 IS 4159:2021"(Leakage Current & Electrical Strength at Operating Temperature)	-	500	-
"Cl. 14 IS 4159:2021"(Transient Over Voltage)	-	600	-
"Cl. 15 IS 4159:2021"(Moisture Resistance)	-	1000	-
"Cl. 16 IS 4159:2021"(Leakage Current and Electric strength)	-	800	-
"Cl. 17 IS 4159:2021"(Overload protection of transformers and associated circuits.)	-	800	-
"Cl. 18 IS 4159:2021"(Endurance)	-	800	-
"Cl. 19 IS 4159:2021"(Abnormal Operation)	-	500	-
"Cl. 20 IS 4159:2021"(Stability and mechanical Hazards)	-	500	-
"Cl. 21 IS 4159:2021"(Mechanical Strength)	-	300	-
"Cl. 22 IS 4159:2021"(Construction)	-	600	-
"Cl. 23 IS 4159:2021"(Internal Wiring)	-	300	-
"Cl. 24 IS 4159:2021"(Components)	-	300	-
"Cl. 25 IS 4159:2021"(Supply Connections and External Flexible Cables and Cords)	-	300	-
"Cl. 26 IS 4159:2021"(Terminal For External Conductors)	-	300	-
"Cl. 27 IS 4159:2021"(Provision For Earthing)	-	800	-
"Cl. 28 IS 4159:2021"(Screws and Connections)	-	300	-
"Cl. 29 IS 4159:2021"(Creepage Distances, Clearances And Distances Through Insulation)	-	500	-
"Cl. 30 IS 4159:2021"(Resistance To Heat, Fire And Tracking)	-	1000	-
"Cl. 31 IS 4159:2021"(Resistance To Rusting)	-	500	-
"Cl. 102 IS 4159:2021"(Leakage and hydrostatic strength (for oil heating elements))	-	1500	-
Cl.22.106(CONSTRUCTION)	-	600	-
"Cl. 6 IS 4159:2021"(Classification)	-	600	-
"Cl. 8 IS 4159:2021"(Protection against access to live parts)	-	600	-
"Cl. 9 IS 4159:2021"(Starting of motor operated appliances)	-	1000	-
"Cl. 10 IS 4159:2021"(Power Input and Current)	-	500	-
"Cl. 11 IS 4159:2021"(Heating)	-	600	-
"Cl. 13 IS 4159:2021"(Leakage Current & Electrical Strength at Operating Temperature)	-	500	-
"Cl. 14 IS 4159:2021"(Transient Over Voltage)	-	600	-
"Cl. 15 IS 4159:2021"(Moisture Resistance)	-	1000	-
"Cl. 16 IS 4159:2021"(Leakage Current and Electric strength)	-	800	-
"Cl. 17 IS 4159:2021"(Overload protection of transformers and associated circuits.)	-	800	-
"Cl. 18 IS 4159:2021"(Endurance)	-	800	-
"Cl. 19 IS 4159:2021"(Abnormal Operation)	-	800	-
"Cl. 20 IS 4159:2021"(Stability and mechanical Hazards)	-	500	-
"Cl. 21 IS 4159:2021"(Mechanical Strength)	-	300	-
"Cl. 22 IS 4159:2021"(Construction)	-	600	-
"Cl. 23 IS 4159:2021"(Internal Wiring)	-	300	-
"Cl. 25 IS 4159:2021"(Supply Connections and External Flexible Cables and Cords)	-	300	-
"Cl. 26 IS 4159:2021"(Terminal For External Conductors)	-	300	-
"Cl. 27 IS 4159:2021"(Provision For Earthing)	-	800	-
"Cl. 28 IS 4159:2021"(Screws and Connections)	-	300	-
"Cl. 29 IS 4159:2021"(Creepage Distances, Clearances And Distances Through Insulation)	-	500	-
"Cl. 30 IS 4159:2021"(Resistance To Heat, Fire And Tracking)	-	1000	-
"Cl. 31 IS 4159:2021"(Resistance To Rusting)	-	500	-
"Cl. 102 IS 4159:2021"(Leakage and hydrostatic strength (for oil heating elements))	-	1500	-
Cl.22.106(CONSTRUCTION)	-	600	-

23 Jun, 2028

-
Included w.e.f 06.11.2024 Exclusion : Cl 24 Components Cl 19.11.4.1 to 19.11.4.7 (EMI/EMC)

IS 17550 : PART 3 (2021)

Household Refrigerating Appliance- Characteristics and test methods Part 3 Energy Consumption and volume

150000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
"Cl. No. 6 "("DETERMINATION OF ENERGY CONSUMPTION")	-	25000	For Direct Cool - Rs. 150000/-, For Frost Free & Others - Rs. 150000/-
"Cl. No.4.8 & Annex H "(Determination Of Volume)	-	15000	-
"Cl. No. 6 "("DETERMINATION OF ENERGY CONSUMPTION")	-	25000	-
"Cl. No. 6 "("DETERMINATION OF ENERGY CONSUMPTION")	-	25000	-
"Cl. No.4.8 & Annex H "(Determination Of Volume)	-	15000	-
4.2(Steady State Power Consumption)	-	16000	-
4.3(Defrost and Recovery Energy and temperature change)	-	16000	-
4.4(Defrost Frequency)	-	16000	-
4.5(Number of Test Points and Interpolations)	-	16000	-
4.6(Load Processing Efficiency)	-	16000	-
4.7(Specified Auxiliaries)	-	15000	-
4.8(Volumn Determination)	-	15000	-
6(Determination of Energy Consumption)	-	25000	-
Annex B(Determination of Steady state Power & Temperature)	-	16000	-
Annex C(Defrost and Recovery Energy and temperature change)	-	16000	-
Annex D(Defrost Interval)	-	16000	-
Annex E(Interpolation of Results)	-	16000	-
Annex F(Energy Consumption of specified auxiliaries)	-	15000	-
Annex G(Determination of Load Processing Efficiency)	-	16000	-
Annex H(Determination of Volume)	-	15000	-

23 Jun, 2028

-
Included w.e.f. 03.05.2024

IS 17550 : PART 2 (2021)

Household Refrigerating Appliance- Characteristics and test methods Part 2 Performance requirements

350000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. No. 6(Storage Test)	-	38000	For Direct Cool - Rs. 170000/-, For Frost Free & Others - 350000
Cl. No. 7(Cooling Capacity Test)	-	38000	-
Cl. No. 8(Freezing Capacity Test)	-	38000	-
Cl. No. 9("Automatic Ice-Making Capacity Test")	-	38000	-
"Cl. No.4.6 & Annex A"(PULL-DOWN TEST)	-	48000	-
Cl. No.4.6(b) & Annex B("Wine Storage Appliances And Compartments; Storage Test")	-	44000	-
Cl. No.4.6(C) & AnnexC("Temperature Rise Test ")	-	45000	-
Cl. No.4.6(d) & Annex D("Water Vapour Condensation Test ")	-	46000	-
Cl. No.4.6(d) & Annex D("Water Vapour Condensation Test ")	-	46000	-
Cl. No. 6(Storage Test)	-	38000	-
Cl. No. 8(Freezing Capacity Test)	-	38000	-
Cl. No. 9("Automatic Ice-Making Capacity Test")	-	38000	-
"Cl. No.4.6 & Annex A"(PULL-DOWN TEST)	-	48000	-
Cl. No.4.6(b) & Annex B("Wine Storage Appliances And Compartments; Storage Test")	-	44000	--
Cl. No.4.6(C) & AnnexC("Temperature Rise Test ")	-	45000	-
Cl. No.4.6(d) & Annex D("Water Vapour Condensation Test ")	-	46000	-
4.2(Storage test)	-	38000	-
4.3(Cooling capacity test)	-	38000	-
4.5(Automatic ice-making capacity test)	-	38000	-
4.6(Other Tests)	-	183000	-
6(Storage test)	-	38000	-
7(Cooling capacity test)	-	38000	-
8(Freezing capacity test)	-	38000	-
9(Automatic ice-making capacity test)	-	38000	-
Annex A(Pull Down test)	-	48000	-
Annex B(Storage test of wine storage appliances and compartments)	-	44000	-
Annex C(Temperature Rise Test)	-	45000	-
Annex D(Water Vapour Condensation Test)	-	46000	-
4.4(Freezing Capacity Test)	-	38000	-
5(General Test Conditions)	-	15000	-

23 Jun, 2028

-
Included w.e.f. 03.05.2024

IS 17550 : PART 1 (2021)

HOUSEHOLD REFRIGERATING APPLIANCES CHARACTERISTICS AND TEST METHODS Part 1 General Requirements

254000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
"Cl. No. 9 "(Testing The Air Tightness Of Door Or Lid Seal(S))	-	4000	-
"Cl. No.10 "(Testing The Opening Force Of Door(S) Or Lid(S))	-	4000	-
"Cl. No.11 "(Testing The Durability Of Hinges And Handles Of Door(S) And Lid(S))	-	15000	-
"Cl. No.12 "(Testing The Mechanical Strength Of Shelves And Similar Components)	-	4000	-
"Cl. No.14 "(Ice-Making Test (If Applicable))	-	12000	-
"Cl. No.15 "(Test For Absence Of Odour And Taste)	-	15000	-
"Cl. No.16 "(Safety Requirements)	-	23500	-
"Cl. No. 9 "(Testing The Air Tightness Of Door Or Lid Seal(S))	-	4000	-
"Cl. No.10 "(Testing The Opening Force Of Door(S) Or Lid(S))	-	4000	-
"Cl. No.11 "(Testing The Durability Of Hinges And Handles Of Door(S) And Lid(S))	-	15000	-
"Cl. No.12 "(Testing The Mechanical Strength Of Shelves And Similar Components)	-	4000	-
"Cl. No.14 "(Ice-Making Test (If Applicable))	-	12000	-
"Cl. No.15 "(Test For Absence Of Odour And Taste)	-	15000	-
"Cl. No.16(a) "(Protection against acess to live parts)	-	1500	-
"Cl. No.16(b) "(Power input and current)	-	2000	-
"Cl. No.16(c) "(Heating)	-	7000	-
"Cl. No.16(d) "(Leakage current and electric strength at operating temperature)	-	4000	-
"Cl. No.16(e) "(Moisture resistance)	-	5000	-
"Cl. No.16(f) "(Leakage current and electric strength)	-	4000	-
"Cl. No.20.3(a) "("Production Routine Test a)Leakage current test ")	-	1500	-
"Cl. No.20.3(b) "(b) Earth continuity tesT)	-	1500	-
"Cl. No.20.3(c) "(c) Electric strength)	-	1500	-
"Cl. No.8.11 "(Thermostat function test)	-	500	-
"Cl. No.5 "(Markings)	-	1000	-
4(Classification)	-	1000	-
5(Marking)	-	1000	-
6.2(Determination of Linear Dimensions)	-	1000	-
7(Instructions)	-	1000	-
8.2(Material and Finishes)	-	1000	-
8.3(Thermal Insulation and Air Tightness)	-	4000	-
8.4(Doors, Lids and Fittings)	-	4000	-
8.5(Shelves and Containers)	-	4000	-
8.6(Disposal of Defrost Water)	-	4000	-
8.7(Refrigerating System)	-	4000	-
8.8(Supply Cord)	-	4000	-
8.9(Compressor)	-	500	-
8.10(Temperature Sensing Controls (Thermostat))	-	500	-
8.11(Temperature Sensing Controls (Thermostat) Setting)	-	500	-
9(Testing the Air tightness of door or lid seal(s) before water vapour condensation test)	-	4000	-
9(Testing the Air tightness of door or lid seal(s) after water vapour condensation test)	-	4000	-
10(Testing the Opening force of door(s) or lid(s))	-	4000	-
11(Testing the Durability of hinges and handles of door(s) and lid(s))	-	15000	-
12(Testing the Mechanical strength of shelves and similar components)	-	4000	-
13(Water-vapour condensation test)	-	12000	-
14(Ice-making test (if applicable))	-	12000	-
15(Test for absence of odour and taste)	-	15000	-
16(a)(Protection against access to live parts)	-	1500	-
16(b)(Power input and current)	-	2000	-
16 (c(Heating)	-	7000	-
16(d)(Leakage current and electric strength at operating temperature)	-	4000	-
16(e)(Moisture resistance)	-	5000	-
16(f)(Leakage current and electric strength (high voltage after humidity))	-	4000	-
17(Packing)	-	500	-
18(Designation)	-	500	-
19(Instructions for Use and Maintenance)	-	500	-
20.3 (a)(Leakage Current Test)	-	1500	-
20.3 (b)(Earth Continuity Test)	-	1500	-
20.3 (c(Electric Strength Test)	-	1500	-
"Cl. No. 9 "(Testing The Air Tightness Of Door Or Lid Seal(S))	-	4000	-
"Cl. No.10 "(Testing The Opening Force Of Door(S) Or Lid(S))	-	4000	-
"Cl. No.11 "(Testing The Durability Of Hinges And Handles Of Door(S) And Lid(S))	-	15000	-
"Cl. No.12 "(Testing The Mechanical Strength Of Shelves And Similar Components)	-	4000	-
"Cl. No.14 "(Ice-Making Test (If Applicable))	-	12000	-
"Cl. No.15 "(Test For Absence Of Odour And Taste)	-	15000	-
"Cl. No.16 "(Safety Requirements)	-	23500	-
"Cl. No. 9 "(Testing The Air Tightness Of Door Or Lid Seal(S))	-	4000	-
"Cl. No.10 "(Testing The Opening Force Of Door(S) Or Lid(S))	-	4000	-
"Cl. No.11 "(Testing The Durability Of Hinges And Handles Of Door(S) And Lid(S))	-	15000	-
"Cl. No.12 "(Testing The Mechanical Strength Of Shelves And Similar Components)	-	4000	-
"Cl. No.14 "(Ice-Making Test (If Applicable))	-	12000	-
"Cl. No.15 "(Test For Absence Of Odour And Taste)	-	15000	-
"Cl. No.16(a) "(Protection against acess to live parts)	-	1500	-
"Cl. No.16(b) "(Power input and current)	-	2000	-
"Cl. No.16(c) "(Heating)	-	7000	-
"Cl. No.16(d) "(Leakage current and electric strength at operating temperature)	-	4000	-
"Cl. No.16(e) "(Moisture resistance)	-	5000	-
"Cl. No.16(f) "(Leakage current and electric strength)	-	4000	-
"Cl. No.20.3(a) "("Production Routine Test a)Leakage current test ")	-	1500	-
"Cl. No.20.3(b) "(b) Earth continuity tesT)	-	1500	-
"Cl. No.20.3(c) "(c) Electric strength)	-	1500	-
"Cl. No.8.11 "(Thermostat function test)	-	500	-
"Cl. No.5 "(Markings)	-	1000	-
4(Classification)	-	1000	-
5(Marking)	-	1000	-
6.2(Determination of Linear Dimensions)	-	1000	-
7(Instructions)	-	1000	-
8.2(Material and Finishes)	-	1000	-
8.3(Thermal Insulation and Air Tightness)	-	4000	-
8.4(Doors, Lids and Fittings)	-	4000	-
8.5(Shelves and Containers)	-	4000	-
8.6(Disposal of Defrost Water)	-	4000	-
8.7(Refrigerating System)	-	4000	-
8.8(Supply Cord)	-	4000	-
8.9(Compressor)	-	500	-
8.10(Temperature Sensing Controls (Thermostat))	-	500	-
8.11(Temperature Sensing Controls (Thermostat) Setting)	-	500	-
9(Testing the Air tightness of door or lid seal(s) before water vapour condensation test)	-	4000	-
9(Testing the Air tightness of door or lid seal(s) after water vapour condensation test)	-	4000	-
10(Testing the Opening force of door(s) or lid(s))	-	4000	-
11(Testing the Durability of hinges and handles of door(s) and lid(s))	-	15000	-
12(Testing the Mechanical strength of shelves and similar components)	-	4000	-
13(Water-vapour condensation test)	-	12000	-
14(Ice-making test (if applicable))	-	12000	-
15(Test for absence of odour and taste)	-	15000	-
16(a)(Protection against access to live parts)	-	1500	-
16(b)(Power input and current)	-	2000	-
16 (c(Heating)	-	7000	-
16(d)(Leakage current and electric strength at operating temperature)	-	4000	-
16(e)(Moisture resistance)	-	5000	-
16(f)(Leakage current and electric strength (high voltage after humidity))	-	4000	-
17(Packing)	-	500	-
18(Designation)	-	500	-
19(Instructions for Use and Maintenance)	-	500	-
20.3 (a)(Leakage Current Test)	-	1500	-
20.3 (b)(Earth Continuity Test)	-	1500	-
20.3 (c(Electric Strength Test)	-	1500	-

23 Jun, 2028

-
Included w.e.f. 03.05.2024

IS 3315 (2019)

Evaporative air coolers (Desert Coolers?) - Specification (Third Revision)

70000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
15.3(BIS Certification Marking)	-	1000	-
15( MARKING AND INFORMATION)	-	750	-
10.5( Stable Operating Conditions)	-	2000	-
10.2(Standard Ratings)	-	1500	-
10(GENERAL TEST CONDITIONS)	-	2000	-
9.5( Energy Consumption)	-	1500	-
9.3(Noise Level)	-	2000	-
9(ADDITIONAL REQUIREMENTS FOR ECO-MARK)	-	1200	-
8.3.1 ,8.4.2, & 6.2(Cooling Efficiency and Air Delivery Test)	-	15000	-
8.2.8, 8.4.3,& 6.2©(Power Consumption Test)	-	8800	-
8.2.7( Finish )	-	750	-
8.2.6( Earthing Connections Tests)	-	3000	-
8.2.5( Leakage Current)	-	4000	-
8.2.4(Insulation Resistance Test)	-	4500	-
8.2.3 (High Voltage Tests)	-	5000	-
8.2.2(Protection against Electric Shock )	-	3000	-
6(PERFORMANCE REQUIREMENTS)	-	3500	-
15.3(BIS Certification Marking)	-	1000	-
15( MARKING AND INFORMATION)	-	750	-
10.5( Stable Operating Conditions)	-	2000	-
10.2(Standard Ratings)	-	1500	-
10(GENERAL TEST CONDITIONS)	-	2000	-
9.5( Energy Consumption)	-	1500	-
9.3(Noise Level)	-	2000	-
9(ADDITIONAL REQUIREMENTS FOR ECO-MARK)	-	1200	-
8.3.1 ,8.4.2, & 6.2(Cooling Efficiency and Air Delivery Test)	-	15000	-
8.2.8, 8.4.3,& 6.2©(Power Consumption Test)	-	8800	-
8.2.7( Finish )	-	750	-
8.2.6( Earthing Connections Tests)	-	3000	-
8.2.5( Leakage Current)	-	4000	-
8.2.4(Insulation Resistance Test)	-	4500	-
8.2.3 (High Voltage Tests)	-	5000	-
8.2.2(Protection against Electric Shock )	-	3000	-
6(PERFORMANCE REQUIREMENTS)	-	3500	-
5(Manufacture and construction)	-	2500	-
7(Electrical equipment)	-	4000	-
8.2.1(General running tests)	-	500	-
8.3.2(Rated frequency)	-	1500	-
8.4.1 a)(Verification of marking)	-	2000	-

23 Jun, 2028

-
Included w.e.f. 03.05.2024

IS 16169 (2014)

Utility - Interconnected photovoltaic inverters - Test procedure of islanding prevention measures

300000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6, (Elec)(Test for single or multi-phase inverter)	-	3500	-
Annex A(Islanding as it applies to PV systems)	-	2000	-
Annex B(Test for independent islanding device)	-	4000	-
6 to 6.2, (Elec)(Test for single or multi-phase inverter to Pass/fail criteria)	-	290000	-
7, (Elec)(Documentation)	-	500	-
Annex B, (Elec)(Test for independent islanding device)	-	4000	-
Annex A, (Elec)(Islanding as it applies to PV systems)	-	2000	-
7(Documentation)	-	500	-
6 to 6.2(Test for single or multi-phase inverter to Pass/fail criteria)	-	290000	-
6(Test for single or multi-phase inverter)	-	3500	-

23 Jun, 2028

-
Included w.e.f. 24.04.2024

IS 14155 (1994)

Domestic electric clothes washing machines for household use - Specification

190000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
18(Finish)	-	2000.00	-
17(Endurance)	-	5000.00	-
16(Determination of mechanical detergent loss in the sump of washing machine)	-	5000.00	-
15(Determination of water and energy consumption)	-	5000.00	-
14(Determination of the water extraction efficiency)	-	5000.00	-
13(Determination of water retention percentage (Rinsing efficiency))	-	5000.00	-
12(Determination of wear suffered by textile)	-	4000.00	-
11(Determination of the washing performance standard measurement with a load of clean material and standardized soiling)	-	94000.00	-
Cl.9 (Cl.8 to Cl.32 of IS 302-2-7)(Safety requirement)	-	48000.00	-
Cl.9 (Cl.24 of IS 302-2-7)(Component)	-	2000.00	-
Cl.9 (Cl.8 to Cl.32 of IS 302-2-7)(Safety requirement for Washing machine)	-	10000	-
9.1(Spin Extractor safety requirement)	-	5000.00	-
18(Finish)	-	2000.00	-
17(Endurance)	-	5000.00	-
16(Determination of mechanical detergent loss in the sump of washing machine)	-	5000.00	-
15(Determination of water and energy consumption)	-	5000.00	-
14(Determination of the water extraction efficiency)	-	5000.00	-
13(Determination of water retention percentage (Rinsing efficiency))	-	5000.00	-
12(Determination of wear suffered by textile)	-	4000.00	-
11(Determination of the washing performance standard measurement with a load of clean material and standardized soiling)	-	94000	-
Cl.9 (Cl.8 to Cl.32 of IS 302-2-7)(Safety requirement)	-	48000	-
Cl.9 (Cl.24 of IS 302-2-7)(Component)	-	2000.00	-
Cl.9 (Cl.8 to Cl.32 of IS 302-2-7)(Safety requirement for Washing machine)	-	10000.00	-
9.1(Spin Extractor safety requirement)	-	5000.00	-

23 Jun, 2028

-
Included w.e.f. 03.05.2024

IS 302 : Part 2 : Sec 7 (2024)

Safety of Household And Similar Electrical Appliances Part 2 Particular Requirements Section 7: Domestic Electric Clothes Washing Machines

48000.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(GENERAL REQUIREMENT)	-	250.00	-
6(CLASSIFICATION)	-	250.00	-
7(MARKING AND INSTRUCTIONS)	-	500.00	-
8(PROTECTION AGAINST ACCESS TO LIVE PARTS)	-	1000.00	-
10(POWER INPUT AND CURRENT)	-	1500.00	-
11(HEATING)	-	3000.00	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	2500.00	-
14(TRANSIENT OVERVOLTAGES)	-	1500.00	-
15(MOISTURE RESISTANCE)	-	5000.00	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	1500.00	-
17("OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS ")	-	1000.00	-
17("OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS ")	-	500.00	-
18(ENDURANCE)	-	5000.00	-
19(ABNORMAL OPERATION)	-	500.00	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-
20(STABILITY AND MECHANICAL HAZARDS)	-	1500.00	-
21(MECHANICAL STRENGTH)	-	1000.00	-
22(CONSTRUCTION)	-	2000.00	-
23(INTERNAL WIRING)	-	1500.00	-
24(COMPONENTS)	-	2500.00	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	2000.00	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	2000.00	-
27(PROVISION FOR EARTHING)	-	2500.00	-
28(SCREWS AND CONNECTIONS)	-	1500.00	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	1000.00	-
30(RESISTANCE TO HEAT AND FIRE)	-	1500.00	-
31(RESISTANCE TO RUSTING)	-	3500.00	-
4(GENERAL REQUIREMENT)	-	250.00	-
6(CLASSIFICATION)	-	250.00	-
7(MARKING AND INSTRUCTIONS)	-	500.00	-
8(PROTECTION AGAINST ACCESS TO LIVE PARTS)	-	1000.00	-
10(POWER INPUT AND CURRENT)	-	1500.00	-
11(HEATING)	-	3000.00	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	2500.00	-
14(TRANSIENT OVERVOLTAGES)	-	1500.00	-
15(MOISTURE RESISTANCE)	-	5000.00	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	1500.00	-
17("OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS ")	-	1000.00	-
17("OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS ")	-	500.00	-
18(ENDURANCE)	-	5000.00	-
19(ABNORMAL OPERATION)	-	500.00	-
20(STABILITY AND MECHANICAL HAZARDS)	-	1500.00	-
21(MECHANICAL STRENGTH)	-	1000.00	-
22(CONSTRUCTION)	-	2000.00	-
23(INTERNAL WIRING)	-	1500.00	-
24(COMPONENTS)	-	2500.00	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	2000.00	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	2000.00	-
27(PROVISION FOR EARTHING)	-	2500.00	-
28(SCREWS AND CONNECTIONS)	-	1500.00	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	1000.00	-
30(RESISTANCE TO HEAT AND FIRE)	-	1500.00	-
31(RESISTANCE TO RUSTING)	-	3500.00	-
19.13(ABNORMAL OPERATION)	-	500.00	-
19.101(Abnormal Operation)	-	500.00	-
19.102(Abnormal Operation)	-	500.00	-

23 Jun, 2028

-
Included w.e.f 03.05.2024 Exclusion: Cl. 19.11.4.1 (Electrostatic discharges), Cl. 19.11.4.2 (Radiated fields), Cl. 19.11.4.3 (Fast transient bursts), Cl. 19.11.4.4 (Surge immunity test), Cl. 19.11.4.5 (Immunity to conducted discharges), Cl. 19.11.4.6 (Class 3 Voltage dips and interruptions), Cl. 19.11.4.7 (Harmonics)

IS 16169 (2019)

Utility - Interconnected photovoltaic inverters - Test procedure of islanding prevention measures (First Revision)

300000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Test for single or multi-phase inverter)	-	3000	-
Annex A(Islanding as it applies to PV systems)	-	2000	-
Annex B(Test for independent islanding device)	-	4000	-
6 to 6.2(Test for single or multi-phase inverter to Pass/fail criteria)	-	290000	-
7(Documentation)	-	500	-
4(Testing circuit)	-	200	-
5(Testing equipment)	-	100	-
Annex C(Gate blocking signal)	-	200	-

23 Jun, 2028

-
Included w.e.f. 19.03.2024

IS/IEC 61730 : PART 2 (2016)

Photovoltaic (PV) module safety qualification: Part 2 requirements for testing (First Revision)

1500000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

23 Jun, 2028

-
-

IS/IEC 62368 : Part 1 (2018)

Audio / Video, Information and Communication Technology Equipment Part 1 Safety Requirements ( First Revision )

85000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 4, 4.1, 4.1.1, 4.1.2, 4.1.3, 4.1.4, 4.1.5, 4.1.6, 4.1.7, 4.1.8, 4.1.9,4.1.10, 4.1.11,4.1.12, 4.1.13, 4.1.14,4.1.15(General Requirements)	-	500	-
Cl. 4.2, 4.2.1, 4.2.2, 4.2.3, 4.2.4(Energy source classifications)	-	1000	-
Cl. No. 4.3 ,4.4,4.5, 4.6,4.7,4.8,4.9,4.10 with all sub clauses(Protection against energy sources)	-	500	-
Cl. No. 5,5.1,5.2,5.3,5.4,5.5,5.6,5.7,5.8 with all sub clauses(Electrically-caused injury)	-	2000	-
Cl No. 6,6.1,6.2,6.3,6.4,6.5,6.6 with all sub clause(Electrically-caused fire)	-	2000	-
Cl. 7, 7.1, 7.2, 7.3, 7.4, 7.5, 7.6(Injury caused by hazardous substances)	-	4000	-
Cl. 8,8.1,8.2,8.3,8.4,8.5,8.6,8.7,8.8,8.9,8.10,8.11,8.12 with all sub clause(Mechanically-caused injury)	-	2000	-
Cl. 9, 9.1, 9.2, 9.2.1,9.2.2, 9.2.3, 9.3, 9.3.1, 9.3.2, 9.4, 9.5, 9.5.1, 9.5.2, 9.6, 9.6.1, 9.6.2, 9.6.3(Thermal burn injury)	-	3000	-
Annex. B, B.1, B.1.1, B.1.2, B.1.3, B.1.4, B.1.5,B.2,B.2.1, B.2.2, B.2.3, B.2.4, B.2.5, B.2.6, B.2.6.1, B.2.6.2, B.2.6.3, B.2.7, B.3, B.3.1, B.3.2, B.3.3, B.3.4, B.3.5, B.3.6, B.3.7, B.3.8, B.4, B.4.1, B.4.2, B.4.3, B.4.3.1, B.4.3.2,B.4.4, B.4.4.1, B.4.4.(Normal operating condition tests, abnormal operating condition tests and single fault condition tests)	-	4000	-
Annex. D, D.1, D.2, D.3(Test Generators)	-	6000	-
Annex E, E.1, E.2, E.3(Test conditions)	-	3000	-
Annex. F, F.1, F.2, F2.1, F.2.2,F2.3,F.3, F.3.1, F.3.2, F.3.2.1,F.3.2.2, F.3.3,F.3.3.1, F.3.3.2,F.3.3.3, F.3.3.4, F.3.3.5, F.3.3.6,F.3.3.7, F.3.3.8, F.3.4, F.3.5, F.3.5.1,F.3.5.2, F.3.5.3, F.3.5.4, F.3.5.5,F.3.5.6, F.3.5.7,F.3.6, F.3.6.1, F.3.6.1.1, F.3.6(Equipment markings, instructions, and instructional safeguards)	-	4000	-
Annex. G, G.1, G.1.1, G.1.2, G.1.3, G.2, G.2.1, G.2.2, G.2.3, G.2.4, G.3, G.3.1, G.3.1.1, G.3.1.2, G.3.2, G.3.2.1,G.3.2.2, G.3.3,G.3.4, G.3.5, G.3.5.1, G.3.5.2, G.4, G.4.1, G.4.2, G.4.3, G.5, G.5.1, G.5.1.1, G.5.1.2,G.5.1.3,G.5.2,G.5.2.1, G.5.2.2, G.5.2.3(Components)	-	4000	-
Annex I(Overvoltage categories)	-	4000	-
Annex. J, J.1, J.2, J.2.1, J.2.2, J.2.2.1, J.2.2.1.1, J.2.2.1.2, J.2.2.1.3, J.2.2.2, J.2.3, J.2.4, J.2.5, J.3, J.3.1, J.3.2, J.3.3(Insulated winding wires for use without interleaved insulation)	-	4000	-
Annex. K, K.1, K.1.1, K.1.2, K.2, K.3, K.4, K.5, K.5.1, K.5.2, K.6, K.6.1, K.6.2, K.7, K.7.1, K.7.2, K.7.3, K.7.4(Safety Interlocks)	-	5000	-
Annex. L, L.1, L.2, L.3, L.4, L.5, L.6, L.7, L.8, L.9,(Disconnect devices)	-	1000	-
Annex. M, M.1, M.2, M.2.1, M.2.2, M.3, M.3.1, M.3.2, M.3.3, M.4, M.4.1, M.4.2,M.4.2.1, M.4.2.2,M.4.3, M.4.4,M.4.4.1, M.4.4.2,M.4.4.3, M.4.4.4, M.4.4.5, M.4.4.6, M.5, M.5.1, M.5.2, M.6, M.6.1, M.6.2, M.7, M.7.1, M.7.2, M.7.3, M.7.3.1,M.7.3.2, M.7.3.3, M.7.(Equipment containing batteries and their protection circuits)	-	2000	-
Annex. N(Electrochemical potentials)	-	2000	-
Annex. O(Measurement of creepage distances and clearances)	-	3000	-
Annex. P, P.1, P.2, P.2.1, P.2.2, P.2.3, P.2.3.1, P.2.3.2, P.3, P.3.1, P.3.2, P.3.3, P.3.4, P.4, P.4.1, P.4.2(Safeguards against conductive objects)	-	2000	-
Annex. Q, Q.1, Q.1.1, Q.1.2, Q.2(Circuits intended for interconnection with building wiring)	-	2000	-
Annex. R, R.1, R.2, R.3, R.4(Limited short-circuit test)	-	5000	-
Annex. S, S.1, S.2, S.3, S.3.1, S.3.2, S.4, S.5(Tests for resistance to heat and fire)	-	5000	-
Annex. T, T.1, T.2, T.3, T.4, T.5, T.6, T.7, T.8, T.9, T.10, T.11(Mechanical strength tests)	-	8000	-
Annex. V, V.1, V.1.1, V.1.2, V.1.3, V.1.4, V.1.5, V.1.6, V.2(Determination of accessible parts)	-	4000	-
Annex. X(Alternative method for determining clearances for insulation in circuits connected to an AC mains not exceeding 420V peak (300V rms))	-	1000	-
Annex. Y, Y.1, Y.2, Y.3, Y.3.1, Y.3.2, Y.3.3, Y.3.4, Y.3.5, Y.4, Y.4.1 Y.4.2, Y.4.3, Y.4.4, Y.4.5, Y.5, Y.5.1, Y.5.2, Y.5.3, Y.5.4, Y.5.5, Y.5.5.1, Y.5.5.2, Y.5.5.3, Y.6, Y.6.1, Y.6.2(Construction requirements for outdoor enclosure)	-	1000	-

23 Jun, 2028

-
-

IS 6290 (1986)

Specification for steam irons (First Revision)

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 5,5.1,5.2(6290)	-	250	-
Cl.6,6.1(6290)	-	250	-
Cl.7,7.1,7.12,7.14,7.101,7.102(6290)	-	500	-
CL 8(6290)	-	500	-
Cl.9(6290)	-	500	-
CL 10(6290)	-	500	-
CL 11(6290)	-	1500	-
CL 12(6290)	-	500	-
CL 13(6290)	-	800	-
Cl.14(6290)	-	800	-
CL 15(6290)	-	2000	-
CL 16(6290)	-	800	-
Cl.17(6290)	-	500	-
CL 18(6290)	-	1000	-
CL 19(6290)	-	1000	-
Cl.20(6290)	-	700	-
Cl 21(6290)	-	1000	-
Cl.22, 22.101, 22.102, 22.103, 22.104,22.105, 22.106, 22.107, 22.108,22.109(6290)	-	1000	-
Cl.23(6290)	-	600	-
Cl.24,24.101(6290)	-	900	-
CL 25(6290)	-	900	-
Cl.26(6290)	-	900	-
Cl.27(6290)	-	800	-
Cl.28(6290)	-	500	-
Cl.29(6290)	-	700	-
Cl.30(6290)	-	1000	-
Cl.31(6290)	-	800	-
Cl.32(6290)	-	500	-
Cl.33(6290)	-	100	-
Cl.101,101.1 ,101.2 101.3 ,101.4, 101.5 101.6 ,101.7(6290)	-	1700	-
CL 102(6290)	-	1700	-
Cl.103,103.1,103.2, 103.3(6290)	-	1800	-
Cl.104.1, 104.2(6290)	-	1800	-
Cl.105,105.1,105.2,105.3,105.4,105.(6290)	-	2700	-
Cl.106,106.1,106.2(6290)	-	2700	-
CL 107.1(6290)	-	2800	-
Cl.107.2,107.3(6290)	-	3000	-

23 Jun, 2028

-
-

IS 13273 (1991)

Vitreous enamelled inner tanks for storage water heater - specification

27000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 5.3.2.1(1238)	-	500	-
Cl. 5.3.2.1(1238)	-	500	-
Cl. 5.3.2.3(13273)	-	2000	-
Cl 5.3.2.2(13273)	-	2500	-
Cl. 5.3.3(13273)	-	1500	-
Cl. 5.3.2.2(3972(P-2/Sec-1))	-	500	-
Cl. 5.3.2.2(3972(P-2/Sec-1))	-	3000	-
Cl. 5.3.2.2(3972(P-2/Sec-1))	-	3000	-
Cl. 5.3.2.2(3972(P-2/Sec-1))	-	2500	-
Cl. 5.3.2.5(13273)	-	3500	-
Cl. 5.4(13273)	-	2500	-
Cl. 5.5(13273)	-	5000	-

23 Jun, 2028

-
-

IS 12510 (1988)

Specification for wall clocks (Battery Operated)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 3, 3.0 to 3.5, 3.5.1 to 3.5.3(12510)	-	1500	-
Cl. 4, 4.1 to 4.4(12510)	-	5000	-
Cl. 3, 3.0 to 3.5, 3.5.1 to 3.5.3(12510)	-	1500	-
Cl. 4, 4.1 to 4.4(12510)	-	5000	-
Cl. 5, 5.1, 5.2, 5.2.1, 5.2.1.1, 5.2.2(12510)	-	1500	-
Cl. 7(12510)	-	1000	-
Cl. 8, 8.1(12510)	-	1000	-

23 Jun, 2028

-
-

IS/IEC 60695 : Part 11 : Sec 10 (2013)

Fire hazard testing: Part 11 test flames :: Sec 10 50 w horizontal and vertical flame test methods

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 8(60695-11-10)	-	20000		-
Cl. 9(60695-11-10)	-	20000		-

23 Jun, 2028

-
-

IS 7872 (2020)

Deep Freezers - Specification ( Second Revision )

165000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Refrigeration system)	-	5000	-
5.4.2(Individual Strength - Pressure Test)	-	833	-
5.4.3(Individual Strength - Pressure Test)	-	833	-
5.4.4(Fatigue Test)	-	833	-
6(Safety Requirements)	-	7000	-
7(Sound Pressure Level)	-	8000	-
8(Freezer Storage Capacity)	-	15000	-
11.1(No load Pull down Test)	-	25000	-
11.2(Energy Consumption Test)	-	35000	-
11.3(Temperature Rise Test)	-	20000	-
11.4(Door Seal Test)	-	10000	-
11.5(Mechanical Strength of Shelves and Similar Components)	-	10000	-
11.6(Thermal Insulation Test ( External Condensation))	-	10000	-
11.7(Pressure Test)	-	10000	-
13(Marking and Instruction)	-	1500	-
4.8(Door and Fittings)	-	2500	-
5.5(Strength Pressure test for components)	-	833	-
5.6(External surface condensation test)	-	833	-
5.1(Sound level)	-	833	-
6(Measurement of freezer storage capacity)	-	3500	-
6.11(Volume measurement Water fill method)	-	3500	-
9.1(No load test)	-	500	-
9.2.1(Pull down time)	-	500	-
9.2.2(Power consumption & percentage running time)	-	500	-

23 Jun, 2028

-
-

IS/IEC 61730 : PART 1 (2016)

Photovoltaic (PV) Module Safety Qualification Part 1 Requirements for Construction ( First Revision )

190000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.0(Application Classes)	-	7500	-
4.0(Construction Requirements)	-	10000	-
5.0(Polymeric Materials)	-	10000	-
4 IS/IEC 61730-1(Classification, Application and Inteded Use)	-	12500	-
5, 5.1 IS/IEC 61730-1(Requirements for design and Construction)	-	10000	-
5.2 IS/IEC 61730-1(Marking and Documentation)	-	12500	-
5.3, 5.3.1 IS/IEC 61730-1(Electrical Components and Insualtion)	-	35000	-
5.3.2 IS/IEC 61730-1(Internal Wiring)	-	3888	-
5.3.3 IS/IEC 61730-1(External Wirings and cables)	-	3888	-
5.3.4 IS/IEC 61730-1(Connectors)	-	3888	-
5.3.5 IS/IEC 61730-1(Junction Box for PV modules)	-	3888	-
5.3.6 IS/IEC 61730-1(Front sheet and back Sheet)	-	3888	-
5.3.7 IS/IEC 61730-1(Insulation Barrier)	-	3888	-
5.3.8 IS/IEC 61730-1(Electrical Connections)	-	3888	-
5.3.9 IS/IEC 61730-1(Encapsulants)	-	3888	-
5.3.10 IS/IEC 61730-1(Bypass Diodes)	-	3888	-
5.4, 5.4.1 IS/IEC 61730-1(Mechanical and Electromechanical connections)	-	45000	-
5.4.2 IS/IEC 61730-1(Screw Connctions)	-	7500	-
5.4.3 IS/IEC 61730-1(Rivets)	-	7500	-
5.4.4 IS/IEC 61730-1(Thread Cutting Screws)	-	7500	-
5.4.5 IS/IEC 61730-1(Form/Press/Tight/Fit)	-	7500	-
5.4.6 IS/IEC 61730-1(Connections by adhesives)	-	7500	-
5.4.7 IS/IEC 61730-1(Other Connections)	-	7500	-
5.5, 5.5.1 IS/IEC 61730-1(Materials)	-	22500	-
5.5.2 IS/IEC 61730-1(Polymeric Materials)	-	2500	-
5.5.2.3.2 IS/IEC 61730-1(Endurance to Electrical Stress)	-	2500	-
5.5.2.3.3 IS/IEC 61730-1(Endurance to thermal stress-RTE (RTI) or TI)	-	2500	-
5.5.2.3.4 IS/IEC 61730-1(Polymeric Insulating materials used as external Parts)	-	2500	-
5.5.2.3.5 IS/IEC 61730-1(Polymeric Insulating Parts supporting live Parts)	-	2500	-
5.5.2.4 IS/IEC 61730-1(Polymeric Meterial used for Mechanical functions)	-	2500	-
5.5.3, 5.5.3.1 IS/IEC 61730-1(Metallic materials)	-	2500	-
5.5.3.2 IS/IEC 61730-1(Current Carrying Parts)	-	2500	-
5.5.4 IS/IEC 61730-1(Adhesives)	-	2500	-
5.6, 5.6.1 IS/IEC 61730-1(Protection Agianst Electric Shock)	-	25000	-
5.6.2 IS/IEC 61730-1(Protection Agianst accessibility to hazardeous live parts)	-	8333	-
5.6.3 IS/IEC 61730-1(Insulation Coordination)	-	8333	-
5.6.4 IS/IEC 61730-1(Distance through Insulation)	-	8333	-
4 IS/IEC 61730-1(Classification, Application and Inteded Use)	-	12500	-
5, 5.1 IS/IEC 61730-1(Requirements for design and Construction)	-	10000	-
5.2 IS/IEC 61730-1(Marking and Documentation)	-	12500	-
5.3, 5.3.1 IS/IEC 61730-1(Electrical Components and Insualtion)	-	35000	-
5.3.2 IS/IEC 61730-1(Internal Wiring)	-	3888	-
5.3.3 IS/IEC 61730-1(External Wirings and cables)	-	3888	-
5.3.4 IS/IEC 61730-1(Connectors)	-	3888	-
5.3.5 IS/IEC 61730-1(Junction Box for PV modules)	-	3888	-
5.3.6 IS/IEC 61730-1(Front sheet and back Sheet)	-	3888	-
5.3.7 IS/IEC 61730-1(Insulation Barrier)	-	3888	-
5.3.8 IS/IEC 61730-1(Electrical Connections)	-	3888	-
5.3.9 IS/IEC 61730-1(Encapsulants)	-	3888	-
5.3.10 IS/IEC 61730-1(Bypass Diodes)	-	3888	-
5.4, 5.4.1 IS/IEC 61730-1(Mechanical and Electromechanical connections)	-	45000	-
5.4.2 IS/IEC 61730-1(Screw Connctions)	-	7500	-
5.4.3 IS/IEC 61730-1(Rivets)	-	7500	-
5.4.4 IS/IEC 61730-1(Thread Cutting Screws)	-	7500	-
5.4.5 IS/IEC 61730-1(Form/Press/Tight/Fit)	-	7500	-
5.4.6 IS/IEC 61730-1(Connections by adhesives)	-	7500	-
5.4.7 IS/IEC 61730-1(Other Connections)	-	7500	-
5.5, 5.5.1 IS/IEC 61730-1(Materials)	-	22500	-
5.5.2 IS/IEC 61730-1(Polymeric Materials)	-	2500	-
5.5.2.3.2 IS/IEC 61730-1(Endurance to Electrical Stress)	-	2500	-
5.5.2.3.3 IS/IEC 61730-1(Endurance to thermal stress-RTE (RTI) or TI)	-	2500	-
5.5.2.3.4 IS/IEC 61730-1(Polymeric Insulating materials used as external Parts)	-	2500	-
5.5.2.3.5 IS/IEC 61730-1(Polymeric Insulating Parts supporting live Parts)	-	2500	-
5.5.2.4 IS/IEC 61730-1(Polymeric Meterial used for Mechanical functions)	-	2500	-
5.5.3, 5.5.3.1 IS/IEC 61730-1(Metallic materials)	-	2500	-
5.5.3.2 IS/IEC 61730-1(Current Carrying Parts)	-	2500	-
5.5.4 IS/IEC 61730-1(Adhesives)	-	2500	-
5.6, 5.6.1 IS/IEC 61730-1(Protection Agianst Electric Shock)	-	25000	-
5.6.2 IS/IEC 61730-1(Protection Agianst accessibility to hazardeous live parts)	-	833	-
5.6.3 IS/IEC 61730-1(Insulation Coordination)	-	833	-
5.6.4 IS/IEC 61730-1(Distance through Insulation)	-	833	-

23 Jun, 2028

-
-

IS/IEC 60335 : Part 2 : Sec 89 (2010)

Household and similar electrical appliances - Safety: Part 2 - 89: particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant unit or compressor

115000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1 , 7.12, 7.14,7.15(Marking)	-	3400	-
8, 8.1(Protection against access to live parts)	-	1200	-
8.1.1 to 8.1.5(Protection against access to live parts)	-	1200	-
8.2(Protection against access to live parts)	-	1200	-
10.1(Power input and current)	-	2500	-
10.101 (Power input and current)	-	2500	-
11(TEMPERATURE RISE)	-	5000	-
11.2(TEMPERATURE RISE)	-	555	-
11.4(TEMPERATURE RISE)	-	555	-
11.5(TEMPERATURE RISE)	-	555	-
11.6(TEMPERATURE RISE)	-	555	-
11.7(TEMPERATURE RISE)	-	555	-
11.8(TEMPERATURE RISE)	-	555	-
11.101(TEMPERATURE RISE)	-	555	-
11.102(TEMPERATURE RISE)	-	555	-
11.103(TEMPERATURE RISE)	-	555	-
13(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	4500	-
13.2(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	2250	-
13.3 & table 4,5(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	2250	-
14(Transient Over Voltage & table 6)	-	4000	-
15(Moisture resistance)	-	12000	-
15.1.1(Moisture resistance)	-	1714	-
15.1.2(Moisture resistance)	-	1714	-
15.2(Moisture resistance)	-	1714	-
15.3(Moisture resistance)	-	1714	-
15.101(Moisture resistance)	-	1714	-
15.102(Moisture resistance)	-	1714	-
15.103(Moisture resistance)	-	1714	-
16 & 16.1(Leakage current and electric strength)	-	5500	-
16.2(Leakage current and electric strength)	-	2750	-
16.3 & table 7(Leakage current and electric strength)	-	2750	-
17(Overload protection of transformers and associated circuits)	-	4000	-
19(ABNORMAL OPERATION)	-	15000	-
19.2(ABNORMAL OPERATION)	-	790	-
19.3(ABNORMAL OPERATION)	-	790	-
19.4(ABNORMAL OPERATION)	-	790	-
19.5(ABNORMAL OPERATION)	-	790	-
19.6(ABNORMAL OPERATION)	-	790	-
19.7 & table 8(ABNORMAL OPERATION)	-	790	-
19.8(ABNORMAL OPERATION)	-	790	-
19.9(ABNORMAL OPERATION)	-	790	-
19.1(ABNORMAL OPERATION)	-	790	-
19.11(ABNORMAL OPERATION)	-	790	-
19.11.1(ABNORMAL OPERATION)	-	790	-
19.11.2(ABNORMAL OPERATION)	-	790	-
19.11.3(ABNORMAL OPERATION)	-	790	-
19.11.4(ABNORMAL OPERATION)	-	790	-
19.11.4.1(ABNORMAL OPERATION)	-	790	-
19.12(ABNORMAL OPERATION)	-	790	-
19.13(ABNORMAL OPERATION)	-	790	-
19.14(ABNORMAL OPERATION)	-	790	-
19.15(ABNORMAL OPERATION)	-	790	-
20.1(Stability and mechanical hazards)	-	2500	-
20.2(Stability and mechanical hazards)	-	2500	-
21.1(MECHANICAL STRENGTH)	-	1000	-
21.2(MECHANICAL STRENGTH)	-	1000	-
22.101(MECHANICAL STRENGTH)	-	1000	-
22.102(MECHANICAL STRENGTH)	-	1000	-
22.1(Constructions)	-	3000	-
22.2(Constructions)	-	230	-
22.3(Constructions)	-	230	-
22.4(Constructions)	-	230	-
22.5(Constructions)	-	230	-
22.6(Constructions)	-	230	-
22.7 to 22.10(Constructions)	-	230	-
22.11(Constructions)	-	230	-
22.12(Constructions)	-	230	-
22.13 to 22.52(Constructions)	-	230	-
22.101 to 22.102(Constructions)	-	230	-
22.103(Constructions)	-	230	-
22.104(Constructions)	-	230	-
22.105 to 22.114(Constructions)	-	230	-
22.104(Constructions)	-	230	-
23.1 & 23.2(Internal wiring)	-	1000	-
23.3(Internal wiring)	-	1000	-
23.4(Internal wiring)	-	1000	-
23.5 to 23.8(Internal wiring)	-	1000	-
23.9 ,23.10(Internal wiring)	-	1000	-
24(Components)	-	8000	-
24.2 to 24.5 (Components)	-	4000	-
25.1(Supply connection and external flexible cords)	-	2500	-
25.2 to 25.25(Supply connection and external flexible cords)	-	2500	-
26, 26.1 to 26.11(Terminals for external conductors)	-	2000	-
27, 27.1 to 27.6(Provision for earthing)	-	3000	-
28.1, Table No.-14(Screws and connections)	-	2000	-
28.2 to 28.4(Screws and connections)	-	2000	-
29 and table (creepage and Clearances distances )	-	1500	-
29.1 & 29.3(creepage and Clearances distances )	-	1500	-
30.1(Resistance to heat and fire)	-	1800	-
30.2(Resistance to heat and fire)	-	1800	-
30.2.1(Resistance to heat and fire)	-	1800	-
30.2.2(Resistance to heat and fire)	-	1800	-
30.2.3(Resistance to heat and fire)	-	1800	-
31(Resistance to rusting)	-	3000	-
7.1 , 7.12, 7.14,7.15(Marking)	-	3400	-
8, 8.1(Protection against access to live parts)	-	1200	-
8.1.1 to 8.1.5(Protection against access to live parts)	-	1200	-
8.2(Protection against access to live parts)	-	1200	-
10.1(Power input and current)	-	2500	-
10.101 (Power input and current)	-	2500	-
11(TEMPERATURE RISE)	-	5000	-
11.2(TEMPERATURE RISE)	-	555	-
11.4(TEMPERATURE RISE)	-	555	-
11.5(TEMPERATURE RISE)	-	555	-
11.6(TEMPERATURE RISE)	-	555	-
11.7(TEMPERATURE RISE)	-	555	-
11.8(TEMPERATURE RISE)	-	555	-
11.101(TEMPERATURE RISE)	-	555	-
11.102(TEMPERATURE RISE)	-	555	-
11.103(TEMPERATURE RISE)	-	555	-
13(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	4500	-
13.2(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	2250	-
13.3 & table 4,5(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	2250	-
14(Transient Over Voltage & table 6)	-	4000	-
15(Moisture resistance)	-	12000	-
15.1.1(Moisture resistance)	-	1714	-
15.1.2(Moisture resistance)	-	1714	-
15.2(Moisture resistance)	-	1714	-
15.3(Moisture resistance)	-	1714	-
15.101(Moisture resistance)	-	1714	-
15.102(Moisture resistance)	-	1714	-
15.103(Moisture resistance)	-	1714	-
16 & 16.1(Leakage current and electric strength)	-	5500	-
16.2(Leakage current and electric strength)	-	2750	-
16.3 & table 7(Leakage current and electric strength)	-	2750	-
17(Overload protection of transformers and associated circuits)	-	4000	-
19(ABNORMAL OPERATION)	-	15000	-
19.2(ABNORMAL OPERATION)	-	790	-
19.3(ABNORMAL OPERATION)	-	790	-
19.4(ABNORMAL OPERATION)	-	790	-
19.5(ABNORMAL OPERATION)	-	790	-
19.7 & table 8(ABNORMAL OPERATION)	-	790	-
19.8(ABNORMAL OPERATION)	-	790	-
19.9(ABNORMAL OPERATION)	-	790	-
19.11(ABNORMAL OPERATION)	-	790	-
19.11.1(ABNORMAL OPERATION)	-	790	-
19.11.2(ABNORMAL OPERATION)	-	790	-
19.11.3(ABNORMAL OPERATION)	-	790	-
19.11.4(ABNORMAL OPERATION)	-	790	-
19.11.4.1(ABNORMAL OPERATION)	-	790	-
19.12(ABNORMAL OPERATION)	-	790	-
19.13(ABNORMAL OPERATION)	-	790	-
19.14(ABNORMAL OPERATION)	-	790	-
19.15(ABNORMAL OPERATION)	-	790	-
20.1(Stability and mechanical hazards)	-	2500	-
20.2(Stability and mechanical hazards)	-	2500	-
21.1(MECHANICAL STRENGTH)	-	1000	-
21.2(MECHANICAL STRENGTH)	-	1000	-
22.101(MECHANICAL STRENGTH)	-	1000	-
22.102(MECHANICAL STRENGTH)	-	1000	-
22.1(Constructions)	-	3000	-
22.2(Constructions)	-	230	-
22.3(Constructions)	-	230	-
22.4(Constructions)	-	230	-
22.5(Constructions)	-	230	-
22.6(Constructions)	-	230	-
22.7 to 22.10(Constructions)	-	230	-
22.11(Constructions)	-	230	-
22.12(Constructions)	-	230	-
22.13 to 22.52(Constructions)	-	230	-
22.101 to 22.102(Constructions)	-	230	-
22.103(Constructions)	-	230	-
22.104(Constructions)	-	230	-
22.104(Constructions)	-	230	-
22.105 to 22.114(Constructions)	-	230	-
22.104(Constructions)	-	230	-
23.1 & 23.2(Internal wiring)	-	1000	-
23.3(Internal wiring)	-	1000	-
23.4(Internal wiring)	-	1000	-
23.5 to 23.8(Internal wiring)	-	1000	-
23.9 ,23.10(Internal wiring)	-	1000	-
24(Components)	-	8000	-
24.2 to 24.5 (Components)	-	4000	-
25.1(Supply connection and external flexible cords)	-	2500	-
25.2 to 25.25(Supply connection and external flexible cords)	-	2500	-
26, 26.1 to 26.11(Terminals for external conductors)	-	2000	-
27, 27.1 to 27.6(Provision for earthing)	-	3000	-
28.1, Table No.-14(Screws and connections)	-	2000	-
28.2 to 28.4(Screws and connections)	-	2000	-
29 and table (creepage and Clearances distances )	-	1500	-
29.1 & 29.3(creepage and Clearances distances )	-	1500	-
30.1(Resistance to heat and fire)	-	9000	-
30.2(Resistance to heat and fire)	-	1800	-
30.2.1(Resistance to heat and fire)	-	1800	-
30.2.2(Resistance to heat and fire)	-	1800	-
30.2.3(Resistance to heat and fire)	-	1800	-
31(Resistance to rusting)	-	3000	-

23 Jun, 2028

-
-

IS 16221 : Part 2 (2015)

Safety of power converters for use in photovoltaic power systems: Part 2 particular requirements for inverters

400000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	50000	-
5(Marking and documentation)	-	20000	-
6(Environmental requirements and conditions)	-	50000	-
7(Protection against electric shock and energy hazards)	-	50000	-
8(Protection against Mechanical Hazards)	-	50000	-
9(Protection against Fire Hazards)	-	50000	-
10(Protection against Sonic Pressure Hazards)	-	25000	-
11(Protection against Liquid Hazards)	-	25000	-
12(Protection against Chemical Hazards)	-	20000	-
13(Physical Requirements)	-	30000	-
14(Components)	-	30000	-
14(Components)	-	30000	-
4(General Test Requirements)	-	50000	-
5(Marking and documentation)	-	20000	-
6(Environmental requirements and conditions)	-	50000	-
7(Protection against electric shock and energy hazards)	-	50000	-
8(Protection against Mechanical Hazards)	-	50000	-
9(Protection against Fire Hazards)	-	50000	-
10(Protection against Sonic Pressure Hazards)	-	25000	-
11(Protection against Liquid Hazards)	-	25000	-
12(Protection against Chemical Hazards)	-	20000	-
13(Physical Requirements)	-	30000	-
14(Components)	-	30000	-

23 Jun, 2028

-
-

IS 16103 : Part 1 (2012)

Led modules for general lighting: Part 1 safety requirements

37500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	4000	1000
21(Heat management)	-	4000	-
8(Terminals)	-	1500	-
9(PROVISION FOR EARTHING)	-	2000	-
10(Protection against accidental contact with live parts)	-	2000	-
11(Mositure Resistance and Insulation)	-	8000	-
12(Electric Strength)	-	5000	-
13(Fault conditions)	-	3000	-
15(Construction)	-	1000	-
16(Creepage distance and clearances)	-	1000	-
17(Screws, current carrying parts and connections)	-	2000	-
18(Resistance to heat, fire and tracking)	-	6000	-
19(Resistance to corrosion)	-	1000	-

23 Jun, 2028

-
-

IS 14286 : Part 1 : Sec 1 (2019)

Terrestrial photovoltaic (PV) modules - Design qualification and type approval: Part 1 test requirements: Sec 1 special requirements for testing of crystalline silicon photovoltaic (Pv) modules (Second Revision)

700000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11.1(Visual inspection (MQT 01))	-	20000	-
11.2(Maximum power determination (MQT 02))	-	20000	-
11.3(Insulation test (MQT 03))	-	10000	-
11.4(Measurement of temperature coefficients (MQT 04))	-	30000	-
11.5(Measurement of nominal module operating temperature (NMOT) (MQT 05))	-	30000	-
11.6(Performance at STC and NMOT (MQT 06))	-	30000	-
11.7(Performance at low irradiance (MQT 07))	-	30000	-
11.8(Outdoor exposure test (MQT 08))	-	30000	-
11.9(Hot-spot endurance test (MQT 09))	-	45000	-
11.1(UV preconditioning test (MQT 10))	-	30000	-
11.11(Thermal cycling test (MQT 11))	-	70000	-
11.12(Humidity-freeze test (MQT 12))	-	85000	-
11.13(Damp heat test (MQT 13))	-	100000	-
11.14(Robustness of terminations (MQT 14))	-	20000	-
11.15(Wet leakage current test (MQT 15))	-	20000	-
11.16(Static mechanical load test (MQT 16))	-	30000	-
11.17(Hail test (MQT 17))	-	30000	-
11.18(Bypass diode thermal test (MQT 18))	-	40000	-
11.19(Stabilization (MQT 19))	-	30000	-

23 Jun, 2028

-
-

IS 14286 : Part 1 (2019)

Terrestrial photovoltaic (PV) modules - Design qualification and type approval: Part 1 test requirements (Second Revision)

1100000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11(Test flow and procedures)	-	100000	-
5(Marking and documentation)	-	100000	-
7(Pass criteria)	-	300000	-
6(Testing)	-	100000	-
8(Major visual defects)	-	200000	-
8(Major visual defects)	-	200000	-
9(Report)	-	150000	-
10(Modifications)	-	150000	-

23 Jun, 2028

-
-

IS 302 : Part 2 : Sec 8 (1994)

Safety of household and similar electrical appliances : part 2 particular requirements, section 8 electrical shavers hair, clippers and similar appliances

24000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Rating)	-	500	-
6(Classification)	-	500	-
7(Marking/ Marking & Instructions)	-	500	-
8(Protection against Electric Shock/ Protection against Access to Live Parts)	-	750	-
9(Starting Of Motor Operated Appliances)	-	500	-
10(Power Input & Current)	-	1000	-
11(Temperature Rise/Heating)	-	1500	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	750	-
14(Radio and Television Interference Suppression/ Transient Over Voltage)	-	750	-
15(Moisture Resistance)	-	2000	-
16(Leakage Current and Electric Strength)	-	750	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	250	-
18(Endurance)	-	1500	-
19(Abnormal Operation)	-	2000	-
20(Stability & Mechanical Hazards)	-	500	-
21(Mechanical strength)	-	750	-
22(Construction)	-	1000	-
23(Internal wiring)	-	750	-
24(Component)	-	1000	-
25(Supply Connection & External Flexible Cables and Cords)	-	1500	-
26(Terminals For External Conductors)	-	750	-
27(Provision For Earthing)	-	1000	-
28(Screws & Connection)	-	750	-
29(Clearances, Creepage Distances & Solid Insulation)	-	1000	-
30(Resistance to Heat & Fire)	-	750	-
31(Resistance to Rusting)	-	750	-
32(Radiation ,Toxicity and similar hazards)	-	250	-

23 Jun, 2028

-
-

IS 302 : Part 2 : Sec 6 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 6 cooking ranges, hobs, ovens and similar appliances (First Revision)

19000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	250	-
7.0(Marking and instructions)	-	250	-
8.0(Protection against access to live part test)	-	250	-
9.0(Starting of motor-operated appliances test)	-	250	-
10.0(Power Input and current test)	-	800	-
11.0(Heating test)	-	1000	-
13.0(Leakage current and electric strength test)	-	500	-
14.0(Transient voltages)	-	1200	-
15.0(Moisture Resistance)	-	1500	-
16.0(Leakage current and electric strength test)	-	500	-
17.0(Overload protection of transformers test)	-	250	-
18.0(Endurance test)	-	250	-
19.0(Abnormal Operations)	-	1000	-
20.0(Stability and Mechanical Hazards)	-	700	-
21.0(Mechanical Strength)	-	700	-
22.0(Construction verification related tests)	-	1000	-
23.0(Internal wiring)	-	950	-
24.0(Components)	-	1000	-
25.0(Supply connections and External Flexible Cords)	-	1500	-
26.0(Terminal for External Conductors)	-	500	-
27.0(Provision for Earthing)	-	950	-
28.0(Screws and connections)	-	500	-
29.0(Clearances and Creepage distances and solid insulation)	-	1500	-
30.0(Resistance to heat and fire)	-	950	-
31.0(Resistance to rusting)	-	500	-
32.0(Radiation, Toxicity and Similar hazards)	-	250	-

23 Jun, 2028

-
Exclusion: 19.11.4.1 (Electrostatic discharges) 19.11.4.2 (Radiated fields) 19.11.4.3 (Fast transient bursts) 19.11.4.4 (Surge immunity test) 19.11.4.5 (Immunity to conducted discharges) 19.11.4.6 (Class 3 Voltage dips and interruptions) 19.11.4.7 (Harmonics)

IS 302 : Part 2 : Sec 3 (2007)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 3 electric iron (First Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1 )	-	200	-
6(Classification- IS 302-1)	-	200	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	50	-
7.1(Marking- IS 302-1)	-	50	-
7.1(Marking- IS 302-1)	-	50	-
7.1(Marking- IS 302-1)	-	50	-
7.1(Marking- IS 302-1)	-	50	-
7.1(Marking- IS 302-1)	-	50	-
7.1(Marking- IS 302-1)	-	50	-
7.1(Marking- IS 302-1)	-	50	-
7.3(Marking- IS 302-1)	-	50	-
7.4(Marking- IS 302-1)	-	50	-
7.6(Marking- IS 302-1)	-	50	-
7.7(Marking- IS 302-1)	-	50	-
7.8(Marking- IS 302-1)	-	50	-
7.11(Marking- IS 302-1)	-	50	-
7.12(Marking- IS 302-1)	-	50	-
7.13(Marking- IS 302-1)	-	50	-
7.14(Marking- IS 302-1)	-	50	-
7.15(Marking- IS 302-1)	-	50	-
7.101(Marking)	-	50	-
8( Protection Against Electric Shock, IS 302-1)	-	250	-
10(Power Input and Current, IS 302-1)	-	600	-
11(Heating, IS 302-1)	-	500	-
11(Heating, IS 302-1)	-	500	500
11(Heating, IS 302-1)	-	500	-
11(Heating, IS 302-1)	-	500	-
11(Heating, IS 302-1)	-	500	-
11(Heating, IS 302-1)	-	500	-
11(Heating, IS 302-1)	-	500	-
11(Heating, IS 302-1)	-	500	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	300	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	300	-
14(Transient Over Voltages, IS 302-1)	-	500	-
15.1(Moisture Resistance, IS 302-1)	-	300	-
15.2(Moisture Resistance, IS 302-1)	-	300	-
15.3(Moisture Resistance, IS 302-1)	-	300	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	450	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	450	-
19.4(Abnormal Operation, IS 302-1)	-	100	-
19.4(Abnormal Operation, IS 302-1)	-	100	-
19.5(Abnormal Operation, IS 302-1)	-	100	-
19.5(Abnormal Operation, IS 302-1)	-	100	-
19.7(Abnormal Operation)	-	100	-
19.9(Abnormal Operation)	-	100	-
19.1(Abnormal Operation)	-	100	-
19.101(Abnormal Operation)	-	100	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	150	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	150	-
21.1(Mechanical Strength, IS 302-1)	-	200	-
21.2(Mechanical Strength, IS 302-1)	-	200	-
22(Construction, IS 302-1)	-	400	-
23.1(Internal Wiring, IS 302-1)	-	200	-
23.2(Internal Wiring, IS 302-1)	-	200	-
23.3(Internal Wiring, IS 302-1)	-	200	-
23.4(Internal Wiring, IS 302-1)	-	200	-
23.5(Internal Wiring, IS 302-1)	-	200	-
23.6(Internal Wiring, IS 302-1)	-	200	-
23.7(Internal Wiring, IS 302-1)	-	200	-
23.8(Internal Wiring, IS 302-1)	-	200	-
23.9(Internal Wiring, IS 302-1)	-	200	-
23.10(Internal Wiring, IS 302-1)	-	200	-
24.1(Components, IS 302-1)	-	100	-
24.2(Components, IS 302-1)	-	100	-
24.5(Components, IS 302-1)	-	100	-
24.6(Components, IS 302-1)	-	100	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	200	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	200	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	200	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	200	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	200	-
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	200	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	200	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	200	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	200	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	200	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	200	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	200	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	200	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	200	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	200	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	200	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	200	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	200	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	200	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	200	-
26(Terminals for External Conductors, IS 302-1)	-	200	-
27.1(Provision for Earthing, IS 302-1)	-	60	-
27.2(Provision for Earthing, IS 302-1)	-	60	-
27.3(Provision for Earthing, IS 302-1)	-	60	-
27.4(Provision for Earthing, IS 302-1)	-	60	-
27.5(Provision for Earthing, IS 302-1)	-	60	-
28(Screws & Connections, IS 302-1)	-	250	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	125	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	125	-
30.1(Resistance to Heat, Fire & Tracking, IS 302-1)	-	250	-
30.2(Resistance to Heat, Fire & Tracking, IS 302-1)	-	250	-
31(Resistance of Rusting, IS 302-1)	-	200	-
32(Radiation, Toxicity and similar Hazard IS 302-1)	-	250	-
17(Overload protection of transformers and associated circuits)	-	250	-
17(Overload protection of transformers and associated circuits)	-	250	-
17(Overload protection of transformers and associated circuits)	-	250	-
18(Endurance)	-	250	-
21.101(Mechanical Strength, IS 302-2-3)	-	400	-
22.101(Construction)	-	400	-
22.102(Construction)	-	400	-
22.103(Construction)	-	400	-
22.104(Construction)	-	400	-
22.105(Construction)	-	400	-
22.106(Construction)	-	400	-
22.107(Construction)	-	400	-
24.4(Components, IS 302-1)	-	100	-
4(General requirement)	-	200	-
16(Leakage current and electric strength)	-	450	-

23 Jun, 2028

IS 5790 (1985)

Specification for domestic electric cooking ovens (First Revision)

80000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Rating)	-	1000	-
6(Classification)	-	500	-
7(Marking)	-	750	-
8(Protection against Access to Live Parts)	-	1000	-
9(Starting Of Motor Operated Appliances)	-	2000	-
10(Power Input & Current)	-	4000	-
11(Temperature Rise/ Heating)	-	6500	-
12(Operation under overload condition of appliances with heating element)	-	5000	-
13(Electrical Insulation and Leakage Current at Operating Temperature)	-	6500	-
14(Radio and Television Interference Suppressions/ Transient Over Voltage)	-	4000	-
15(Moisture Resistance)	-	4500	-
16(Insulation Resistance and Electric Strength (After Humidity Treatment)/ Leakage Current and Electric Strength)	-	3750	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	1000	-
18(Endurance)	-	5000	-
19(Abnormal Operation)	-	3000	-
20(Stability & Mechanical Hazards)	-	1000	-
21(Mechanical strength)	-	1000	-
22(Construction)	-	2000	-
23(Internal wiring)	-	2000	-
24(Components)	-	1000	-
25(Supply Connection & External Flexible Cords)	-	1000	-
26(Terminals For External Conductors)	-	1000	-
27(Provision For Earthing)	-	2000	-
28(Screws & Connections)	-	2000	-
29(Clearances, Creepage Distances & Solid Insulation)	-	1500	-
30(Resistance to Heat & Fire)	-	5000	-
31(Resistance to Rusting)	-	2500	-
32(Radiation ,Toxicity and similar hazards)	-	1500	-
33(Finish)	-	1000	-
101(Heating Up Time)	-	1500	-
102(Heat Losses)	-	1500	-
103(Uniformity of Temperature)	-	1000	-
104(Thermostat setting and differential (For automatic ovens only))	-	3000	-

23 Jun, 2028

-
-

IS 10322 : Part 5 : Sec 9 (2017)

Luminaires: Part 5 particular requirements: Sec 9 rope lights

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
21.4(General Test Requireements)	-	2000	-
21.5(Classification of Luminaires')	-	1000	-
21.6(Marking)	-	1000	-
21.7(Construction)	-	3000	-
21.8(Creepage Distance and Clearances)	-	1000	-
21.10(Terminals)	-	1000	-
21.11(External & Internal Wiring)	-	1000	-
21.12(Protection against electric shock)	-	2000	-
21.13(Endurance Tests and Thermal Tests)	-	10000	-
21.14(Resistance to Dust & Moisture)	-	10000	-
21.15(Insulation Resistance and Electric Strength)	-	3000	-
21.16(Resistance to Heat , fire and tracking)	-	5000	-

23 Jun, 2028

-
-

IS 1258 (2005)

Bayonet lamp holders (Fourth Revision)

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Rating )	-	400	-
6(Rating )	-	400	-
7(Classification)	-	500	-
7.2(Classification)	-	100	-
7.3(Classification)	-	100	-
7.4(Classification)	-	100	-
7.5(Classification)	-	100	-
7.6(Classification)	-	100	-
9.1(Dimensions)	-	500	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.2(Dimensions)	-	150	-
9.3(Dimensions)	-	150	-
9.3(Dimensions)	-	150	-
9.3(Dimensions)	-	150	-
9.3(Dimensions)	-	150	-
9.3(Dimensions)	-	150	-
9.3(Dimensions)	-	150	-
9.3(Dimensions)	-	150	-
10(Protection against electric shock )	-	1000	-
11.1(Terminals)	-	125	-
11.2(Terminals)	-	125	-
11.3(Terminals)	-	125	-
11.3(Terminals)	-	125	-
11.3(Terminals)	-	125	-
11.3(Terminals)	-	125	-
11.3(Terminals)	-	125	-
11.3(Terminals)	-	125	-
11.4(Terminals)	-	125	-
12(Provision for Earthing)	-	1000	-
13.1(Construction)	-	110	-
13.1(Construction (Data Sheet No 7005-10))	-	110	-
13.1(Construction (Data Sheet No 7005-10& 7006-15A))	-	110	-
13.2(Construction (Data Sheet No 7005-10& 7006-15A))	-	110	-
13.3(Construction )	-	110	-
13.4(Construction )	-	110	-
13.5(Construction)	-	110	-
13.2 ,13.6 & 13.7 (Construction)	-	110	-
13.2 ,13.6 & 13.8(Construction)	-	110	-
13.11(Construction)	-	110	-
14(Construction)	-	500	-
15.1(Moisture Resistance, Insulation Resistance and Electric Strength)	-	700	-
15.2(Moisture Resistance, Insulation Resistance and Electric Strength)	-	700	-
15.3(Moisture Resistance, Insulation Resistance and Electric Strength)	-	700	-
16.1(Mechanical Strength)	-	500	-
16.1(Mechanical Strength)	-	60	-
16.2(Mechanical Strength)	-	60	-
16.3(Mechanical Strength)	-	60	-
16.4(Mechanical Strength)	-	60	-
16.5(Mechanical Strength)	-	60	-
16.6 & Table - 6(Mechanical Strength)	-	60	-
16.7(Mechanical Strength)	-	60	-
16.8(Mechanical Strength)	-	60	-
17(Screws,current-carrying parts and connections)	-	500	-
18(Creepage distances and Clearances)	-	500	-
18.1, Table 8(Creepage distances and Clearances)	-	500	-
18.1, Table 8(Creepage distances and Clearances)	-	500	-
18.1, Table 8(Creepage distances and Clearances)	-	500	-
18.1, Table 8(Creepage distances and Clearances)	-	500	-
18.1, Table 8(Creepage distances and Clearances)	-	500	-
18.1, Table 8(Creepage distances and Clearances)	-	500	-
18.1, Table 8(Creepage distances and Clearances)	-	500	-
19.1(General resistance to heat)	-	375	-
19.2(General resistance to heat)	-	375	-
19.3(General resistance to heat)	-	375	-
19.4(Resistance to heat test)	-	375	-
20.1(Resistance to heat, fire and tracking)	-	500	-
20.3(Resistance to heat, fire and tracking)	-	500	-
20.4(Resistance to heat, fire and tracking)	-	500	-
20.5(Resistance to tracking)	-	500	-
21.1(Resistance to excessive residual stresses and to rusting)	-	500	-
21.1(Resistance to excessive residual stresses and to rusting)	-	500	-
6(Rating )	-	400	-
6(Rating )	-	400	-
7(Classification)	-	500	-
7.2(Classification)	-	100	-
7.3(Classification)	-	100	-
7.4(Classification)	-	100	-
7.5(Classification)	-	100	-
7.6(Classification)	-	100	-
8.1(Marking )	-	500	-
8.1(Marking )	-	60	-
8.1(Marking )	-	60	-
8.1(Marking )	-	60	-
8.1(Marking )	-	60	-
8.1(Marking )	-	60	-
8.1(Marking )	-	60	-
8.1(Marking )	-	60	-
8.1(Marking )	-	60	-
8.1(Marking )	-	60	-
8.1(Marking )	-	60	-
8.1(Marking )	-	60	-
8.2(Marking )	-	60	-
8.2(Marking )	-	60	-
8.2(Marking )	-	60	-
8.3(Marking )	-	60	-
8.4(Marking )	-	60	-
8.5(Marking )	-	60	-
8.6(Marking )	-	60	-
8.7(Marking )	-	60	-
8.8(Marking )	-	60	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.1(Dimensions)	-	150	-
9.2(Dimensions)	-	150	-
9.3(Dimensions)	-	150	-
9.3(Dimensions)	-	150	-
9.3(Dimensions)	-	150	-
9.3(Dimensions)	-	150	-
9.3(Dimensions)	-	150	-
9.3(Dimensions)	-	150	-
10(Protection against electric shock )	-	1000	-
11.1(Terminals)	-	125	-
11.2(Terminals)	-	125	-
11.3(Terminals)	-	125	-
12.3(Terminals)	-	125	-
11.3(Terminals)	-	125	-
11.3(Terminals)	-	125	-
11.3(Terminals)	-	125	-
11.4(Terminals)	-	125	-
13.1(Construction)	-	110	-
13.1(Construction (Data Sheet No 7005-10))	-	110	-
13.1(Construction (Data Sheet No 7005-10& 7006-15A))	-	100	-
13.2(Construction (Data Sheet No 7005-10& 7006-15A))	-	110	-
13.3(Construction )	-	110	-
13.4(Construction )	-	110	-
13.5(Construction)	-	110	-
13.2 ,13.6 & 13.7 (Construction)	-	110	-
13.2 ,13.6 & 13.8(Construction)	-	110	-
13.11(Construction)	-	110	*
14(Construction)	-	500	-
15.1(Moisture Resistance, Insulation Resistance and Electric Strength)	-	700	-
15.3(Moisture Resistance, Insulation Resistance and Electric Strength)	-	700	-
16.1(Mechanical Strength)	-	60	-
16.2(Mechanical Strength)	-	60	-
16.4(Mechanical Strength)	-	60	-
16.5(Mechanical Strength)	-	60	-
16.6 & Table - 6(Mechanical Strength)	-	60	-
16.7(Mechanical Strength)	-	60	-
16.8(Mechanical Strength)	-	60	-
17(Screws,current-carrying parts and connections)	-	500	-
18(Creepage distances and Clearances)	-	500	-
18(Creepage distances and Clearances)	-	500	-
18(Creepage distances and Clearances)	-	500	-
18(Creepage distances and Clearances)	-	500	-
18(Creepage distances and Clearances)	-	500	-
18(Creepage distances and Clearances)	-	500	-
18(Creepage distances and Clearances)	-	500	-
18(Creepage distances and Clearances)	-	500	-
19.1(General resistance to heat)	-	375	-
19.2(General resistance to heat)	-	375	-
19.3(General resistance to heat)	-	375	-
19.4(Resistance to heat test)	-	500	-
20.1(Resistance to heat, fire and tracking)	-	500	-
20.3(Resistance to heat, fire and tracking)	-	500	-
20.4(Resistance to heat, fire and tracking)	-	500	-
20.5(Resistance to tracking)	-	500	-
21.1(Resistance to excessive residual stresses and to rusting)	-	500	-
21.1(Resistance to excessive residual stresses and to rusting)	-	500	-

23 Jun, 2028

-
-

First
Prev
1
2
3
4
Next
Last

Bureau of Indian Standards

The National Standards Body of India

DELHI TEST HOUSE (50) KUNDLI SONIPAT

PLOT NO 50 phase IV sector 57 hsiidc industrial area kundli, Sonipat, Sonipat, Haryana, 131028

9810442016 ag@delhitesthouse.com

Scope List

No Record Found