BIS - LIMS (Laboratory Information Management System)

DELHI TEST HOUSE KUNDLI

PLOT NO 50 phase IV sector 57 hsiidc industrial area kundli, Sonipat, Sonipat, Haryana, 131028

9810442016 ag@delhitesthouse.com

Scope List

Reset

75 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS/IEC 61730 : PART 2 (2004)

Photovoltaic (PV) Module Safety Qualification Part 2 Requirements for Testing

675000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.1(Visual Inspection (MST 01))	-	70000	-
10.2(Accessibility test (MST 11))	-	120000	-
10.3(Cut susceptibility test (MST 12))	-	70000	-
10.4(Ground Continuity Test (MST 13))	-	70000	-
10.5(Impulse voltage test (MST 14))	-	90000	-
10.6(Dielectric withstand test (MST 16))	-	20000	-
10.7(Temperature test (MST 21))	-	70000	-
10.8(Fire test (MST 23))	-	15000	-
10.9(Reverse Current overload test (MST 26))	-	80000	-
10.10(Module breakage test (MST 32))	-	30000	-
11.1(Partial discharge-test (MST 15))	-	30000	-
11.2(Conduit Bending test (MST 33))	-	5000	-
11.3(Terminal box knockout tests (MST 44))	-	5000	-

Complete

23 Jun, 2025

-
-

IS 16270 (2014)

Secondary cells and batteries for solar photovoltaic application - General requirements and methods of test

1330000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Condition of use)	-	500	NA
5.1(Mechanical Endurance)	-	10000	NA
5.2(Charge efficiency)	-	100000	NA
5.3(Deep discharge protection)	-	100000	NA
5.4(Marking)	-	1000	NA
5.5(Dafety)	-	20000	NA
5.6(Documentation)	-	500	NA
6(Finctional Characteristics)	-	500	NA
7(General test conditions)	-	500	NA
8.1(Capacity test)	-	100000	NA
8.2(Endurance test)	-	300000	NA
8.3(Charge retention test)	-	200000	NA
8.4(Cycle endurance in Photovoltaic application)	-	200000	NA
8.5(Sulphation Test)	-	200000	NA
8.6(Water loss test)	-	30000	NA
8.7(Non spillability)	-	67000	NA

Complete

23 Jun, 2025

-
For Stationary Lead Acid Batteries – Vented (IS 1651 & IS 13369 ) upto 20A only

IS 16242 : Part 1 (2014)

Uninterruptible power systems (UPS): Part 1 general and safety requirements for UPS

110000.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.6(Power interface)	-	10000.00	Complete tests 55000.00/110000.00 for rating ≤10 KVA
4.7(Marking & instructions)	-	4000.00	Complete tests 55000.00/110000.00 for rating ≤10 KVA
5.1(Protection against shock and energy hazards)	-	6000.00	Complete tests 55000.00/110000.00 for rating ≤10 KVA
5.2(Requirement of auxiliary circuits)	-	3000.00	Complete tests 55000.00/110000.00 for rating ≤10 KVA
5.3(Protective earthing and bonding)	-	3000.00	Complete tests 55000.00/110000.00 for rating ≤10 KVA
5.4(AC and DC power isolation)	-	4000.00	Complete tests 55000.00/110000.00 for rating ≤10 KVA
5.5(Over current and earth fault condition)	-	4000.00	Complete tests 55000.00/110000.00 for rating ≤10 KVA
5.6(Safety interlocks)	-	5000.00	Complete tests 55000.00/110000.00 for rating ≤10 KVA
5.7(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	5000.00	Complete tests 55000.00/110000.00 for rating ≤10 KVA
6.1(Wiring, connections and supply)	-	7000.00	Complete tests 55000.00/110000.00 for rating ≤10 KVA
6.2(Connection to power)	-	7000.00	Complete tests 55000.00/110000.00 for rating ≤10 KVA
6.3(Wiring terminals for external power conductors)	-	6000.00	Complete tests 55000.00/110000.00 for rating ≤10 KVA
7.1(Enclosure)	-	3000.00	Complete tests 55000.00/110000.00 for rating ≤10 KVA
7.2(STABILITY)	-	2000.00	Complete tests 55000.00/110000.00 for rating ≤10 KVA
7.3(MECHANICAL STRENGTH)	-	2000.00	Complete tests 55000.00/110000.00 for rating ≤10 KVA
7.4(Construction details)	-	3000.00	Complete tests 55000.00/110000.00 for rating ≤10 KVA
7.5(Resistance to fire)	-	2000.00	Complete tests 55000.00/110000.00 for rating ≤10 KVA
7.7(Temperature rise)	-	10000.00	Complete tests 55000.00/110000.00 for rating ≤10 KVA
8.1(General procision for earth leakage)	-	6000.00	Complete tests 55000.00/110000.00 for rating ≤10 KVA
8.2(Electric Strength)	-	6000.00	Complete tests 55000.00/110000.00 for rating ≤10 KVA
8.3(Abnormal operating and fault conditions)	-	6000.00	Complete tests 55000.00/110000.00 for rating ≤10 KVA
9.0(Connection to telecommunication networks)	-	4000.00	Complete tests 55000.00/110000.00 for rating ≤10 KVA
4.5(Components)	-	1000	Complete tests 55000.00/110000.00 for rating ≤10 KVA
7.6(Battery location)	-	1000	Complete tests 55000.00/110000.00 for rating ≤10 KVA

Complete

23 Jun, 2025

-
Excluding testing of Components (Cl.4.5) Cl. 7.6 and Annex-M – Ventilation of Battery Compartments Annex I.5 – Solid state backfeed protection Cl. 2.8.5/RD –Moving Parts Cl. 2.8.7.2/RD – Switches and Relays (Overload Test) Cl. 2.8.7.3/RD - Switches and Relays (Endurance Test) Cl. 2.10.5.4/RD and Annex- U – Semiconductor devices. Cl. 2.10.5.6/RD – Thin sheet Materials Cl. 2.10.5.8/RD –Non- Separable Thin sheet Materials Cl. 2.10.8/RD –Coated PCBs

IS 16102 : Part 1 (2012)

Self - Ballasted led lamps for general lighting services: Part 1 safety requirements

43875 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking)	-	1000	-
6(Interchangeability)	-	3000	-
7(Protection against accidental contact with live parts)	-	5000	-
8(Insulation Resistance and Electric Strength)	-	10000	-
9(MECHANICAL STRENGTH)	-	5000	-
10(cap temperature)	-	10000	-
11(Resistance to Heat)	-	5000	-
12(Resistance to Flame and Ignition)	-	5000	-
13(Fault conditions)	-	5000	-
14(Creepage distance and clearances)	-	5000	-
4(General requirement and General test requirements)	-	1000	-

Complete

23 Jun, 2025

-
Cap type - B22d/E14/E27 Excluding testing of Cap Excluding testing of Cap type other than B22d, E-14 and E-27 (Cl. 6 )

IS 16046 : Part 1 (2018)

Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes ” Safety Requirements for Portable Sealed Secondary Cells and for Batteries Made from Them for Use in Portable Applications Part 1 Nickel Systems ( Second Revision )

120000 View breakup
Rs.120000/- for cells Rs.88000/- for Battery

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Parameter Measurement Tolerances)	-	500	Battery- 120000 Cell- 88000
5(General Safety Considerations)	-	250	Battery- 120000 Cell- 88000
5.1(General)	-	250	Battery- 120000 Cell- 88000
5.2(Insulation and Wiring)	-	3000	Battery- 120000 Cell- 88000
5.3(Venting)	-	3000	Battery- 120000 Cell- 88000
5.4(Temperature, Voltage and Current Management)	-	1000	Battery- 120000 Cell- 88000
5.5(Terminal Contacts)	-	1000	Battery- 120000 Cell- 88000
5.6(Assembly of Cells into batteries)	-	3000	Battery- 120000 Cell- 88000
5.7(Quality Plan)	-	500	Battery- 120000 Cell- 88000
6(Tyoe Test amd Sample Size)	-	500	Battery- 120000 Cell- 88000
7(Specific requirements and tests)	-	1000	Battery- 120000 Cell- 88000
7.1(Charging procedure for test purposes)	-	9000	Battery- 120000 Cell- 88000
7.2(Intended Use)	-	53000	Battery- 120000 Cell- 88000
7.3(Reasonably foreseeable misuse)	-	55000	Battery- 120000 Cell- 88000
8(Information for safety)	-	1000	Battery- 120000 Cell- 88000
8.1(General)	-	1000	Battery- 120000 Cell- 88000
8.2(Small Cell and battery safety information)	-	1000	Battery- 120000 Cell- 88000
9(Marking)	-	500	Battery- 120000 Cell- 88000
9.1(Cell Marking)	-	500	Battery- 120000 Cell- 88000
9.2(Battery Marking)	-	1000	Battery- 120000 Cell- 88000
9.3(Caution for ingestion of small cells and batteries)	-	1000	Battery- 120000 Cell- 88000
9.4(Other information)	-	500	Battery- 120000 Cell- 88000
10(Packaging)	-	500	Battery- 120000 Cell- 88000

Complete

23 Jun, 2025

-
Transport test based on manufacturer document for compliance. Upto 10 Ah for Batteries and upto 8A for charging current only

IS 14286 (2010)

Crystalline silicon terrestrial photovoltaic (PV) modules - Design qualification and type approval (First Revision)

750000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.1(Visual inspection)	-	4000.0	--
10.2(Maximum power determination)	-	20000	-
10.3(Insulation test)	-	5000	-
10.4(Measurement of temperature coefficients)	-	20000	-
10.5(Measurement of NOCT)	-	20000	-
10.6(Performance at STC and NOCT)	-	15000	-
10.7(Performance at low irradiance)	-	15000	-
10.8(Outdoor exposure test)	-	35000	-
10.9(Hot-spot endurance test)	-	20000	-
10.10(UV preconditioning)	-	20000	-
10.11(Thermal cycling test)	-	200000	-
10.12(Humidity freeze test)	-	120000	-
10.13(Damp heat test)	-	220000	-
10.14(Robustness of termination test)	-	5000	-
10.15(Wet leakage current test)	-	5000	-
10.16(Mechanical load test)	-	15000	-
10.17(Hail test)	-	5000	-
10.18(Bypass diode thermal' test)	-	5000	-
4(Marking)	-	1000	-

Complete

23 Jun, 2025

-
-

IS 10322 : Part 5 : Sec 7 (2017)

Luminaires: Part 5 particular requirements: Sec 7 lighting chains (First Revision)

48000.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
20.6(Marking)	-	1000.00	N/A
20.4(General Test Requireements)	-	1000.00	N/A
20.5(Classification of Luminaires')	-	1000.00	N/A
20.7(Construction)	-	2000.00	N/A
20.8(Creepage Distance and Clearances)	-	3000.00	N/A
20.10(Terminals)	-	4000.00	N/A
20.11(External & Internal Wiring)	-	3000.00	N/A
20.12(Protection against electric shock)	-	5000.00	N/A
20.13(Endurance Tests and Thermal Tests)	-	11000.00	N/A
20.14(Resistance to Dust & Moisture)	-	5000.00	N/A
20.15(Insulation Resistance and Electric Strength)	-	6000.00	N/A
20.16(Resistance to Heat , fire and tracking)	-	6000.00	N/A

Complete

23 Jun, 2025

-
Excluding: Terminals and supply connections (Cl.20.7.4) , Electrical endurance (CBC) (Cl. 6.14.2 of Annex A), Terminals and supply connections (Cl.20.7.4 & 6.14 3 of Annex A Bendings (non-rewirable connectors), Control units (Cl.20.7.8)

IS 302 : Part 2 : Sec 26 (2014)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 26 clocks (First Revision)

45000.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	1000.00	N/A
7(Marking and instructions)	-	1000.00	N/A
8(Protection against live parts)	-	2000.00	N/A
10(POWER INPUT AND CURRENT)	-	2000.00	N/A
11(HEATING)	-	3000.00	N/A
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	2000.00	N/A
14(TRANSIENT OVERVOLTAGES)	-	3000.00	N/A
15(MOISTURE RESISTANCE)	-	3000.00	N/A
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	3000.00	N/A
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	3000.00	N/A
19(ABNORMAL OPERATION)	-	3000.00	N/A
20(STABILITY AND MECHANICAL HAZARDS)	-	2000.00	N/A
21(MECHANICAL STRENGTH)	-	2000.00	N/A
22(CONSTRUCTION)	-	1000.00	N/A
23(INTERNAL WIRING)	-	2000.00	N/A
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	2000.00	N/A
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	1000.00	N/A
27(PROVISION FOR EARTHING)	-	1000.00	N/A
28(SCREWS AND CONNECTIONS)	-	1000.00	N/A
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	2000.00	N/A
30(RESISTANCE TO HEAT AND FIRE)	-	2000.00	N/A
31(RESISTANCE TO RUSTING)	-	2000.00	N/A
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	1000.00	N/A

Complete

23 Jun, 2025

-
Excluding testing of software (Cl.22.46), EMC/EMI (Cl.19.11.4), Components (Cl.24)

IS 16046 : Part 2 (2018)

100000 View breakup
Rs.100000/- for cells Rs.85000/- for Battery

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Parameter Measurement Tolerances)	-	500	Battery- 85000.00 Cell- 100000
5(General Safety Considerations)	-	250	Battery- 85000.00 Cell- 100000
5.1(General)	-	250	Battery- 85000.00 Cell- 100000
5.2(Insulation and Wiring)	-	3000	Battery- 85000.00 Cell- 100000
5.3(Venting)	-	1000	Battery- 85000.00 Cell- 100000
5.4(Temperature, Voltage and Current Management)	-	1000	Battery- 85000.00 Cell- 100000
5.5(Terminal Contacts)	-	1000	Battery- 85000.00 Cell- 100000
5.6(Assembly of Cells into batteries)	-	5000	Battery- 85000.00 Cell- 100000
5.7(Quality Plan)	-	500	Battery- 85000.00 Cell- 100000
5.8(Battery Safety Components)	-	500	Battery- 85000.00 Cell- 100000
6(Type Test and Sample Size)	-	11000	Battery- 85000.00 Cell- 100000
7(Specific requirements and tests)	-	1000	Battery- 85000.00 Cell- 100000
7.1(Charging procedure for test purposes)	-	30000	Battery- 85000.00 Cell- 100000
7.2(Intended Use)	-	33000	Battery- 85000.00 Cell- 100000
7.3(Reasonably foreseeable misuse)	-	63000	Battery- 85000.00 Cell- 100000
8(Information for safety)	-	1000	Battery- 85000.00 Cell- 100000
8.1(General)	-	1000	Battery- 85000.00 Cell- 100000
8.2(Small Cell and battery safety information)	-	1000	Battery- 85000.00 Cell- 100000
9(Marking)	-	500	Battery- 85000.00 Cell- 100000
9.1(Cell Marking)	-	500	Battery- 85000.00 Cell- 100000
9.2(Battery Marking)	-	1000	Battery- 85000.00 Cell- 100000
9.3(Caution for ingestion of small cells and batteries)	-	1000	Battery- 85000.00 Cell- 100000
9.4(Other information)	-	1000	Battery- 85000.00 Cell- 100000
10(Packaging)	-	500	Battery- 85000.00 Cell- 100000

Complete

23 Jun, 2025

-
Transport test based on manufacturer document for compliance. Upto 10 Ah for Batteries and upto 8A for charging current only

IS 10322 : Part 5 : Sec 6 (2013)

Luminaires: Part 5 particular requirements: Sec 6 handlamps

48000.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Marking)	-	1000.00	N/A
4(General Test Requireements)	-	500.00	N/A
5(Classification of Luminaires')	-	500.00	N/A
7.0(Construction)	-	7000.00	N/A
8.0(Creepage Distance and Clearances)	-	2000.00	N/A
9.0(Provision for earthing)	-	2000.00	N/A
10.0(Terminals)	-	2000.00	N/A
11.0(External & Internal Wiring)	-	5000.00	N/A
12.0(Protection against electric shock)	-	3000.00	N/A
13.0(Endurance Tests and Thermal Tests)	-	10000.00	N/A
14.0(Resistance to Dust & Moisture)	-	5000.00	N/A
15.0(Insulation Resistance and Electric Strength)	-	5000.00	N/A
16.0(Resistance to Heat , fire and tracking)	-	5000.00	N/A

Complete

23 Jun, 2025

-
-

IS 2082 (2018)

Stationary storage type electric water heaters - Specification (Fifth Revision)

30038 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	1250	-
7(Marking)	-	1250	-
7(Marking)	-	1250	-
7(Marking)	-	1250	-
7(Marking)	-	1250	-
7(Marking)	-	1250	-
7(Marking)	-	1250	-
7(Marking)	-	1250	-
7(Marking)	-	1250	-
6(Classification )	-	1250	-
6(Classification )	-	1250	-
(Cl.8 of IS 302-2-21:2011)(Protection Against Access to Live Parts)	-	500	-
(Cl.10 of IS 302-2-21: 2011)(Power Input & Current)	-	1000	-
(Cl.11 of 302-2-21:2011)(Heating)	-	1000	-
(Cl.11 of 302-2-21:2011)(Heating)	-	1000	-
(Cl.11 of 302-2-21:2011)(Heating)	-	1000	-
(Cl.13 of IS 302-2-21:2011)(Leakage Current )	-	500	-
(Cl.13 of IS 302-2-21:2011)(Electrical Strength at Operating Temperature)	-	500	-
(Cl.14ofIS302-2-21:2011)(Transient Over Voltages)	-	1000	-
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	1000	-
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	1000	-
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	1000	-
(Cl.17 of IS 302-2-21:2011)(Overload protection of transformers & associated circuits)	-	2000	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	1000	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	1000	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	1000	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	1000	-
(Cl.20 of IS 302-2-21:2011)(Stability & Mechanical Hazards)	-	500	-
(Cl.21ofIS302-2-21:2011)(Mechanical strength)	-	750	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl.24ofIS302-221:2011)(Component)	-	750	-
(Cl.24ofIS302-221:2011)(Component)	-	750	-
(Cl.24ofIS302-221:2011)(Component)	-	750	-
(Cl.24ofIS302-221:2011)(Component)	-	750	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	750	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	750	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	750	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	750	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	750	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	750	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	750	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	750	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	750	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	750	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	750	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	750	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	750	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	750	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	750	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	750	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	750	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	750	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	750	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	500	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	500	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	500	-
(Cl.28 of IS 302-2-21:2011)(Screws & Connections)	-	500	-
(Cl.29ofIS302-2-21:2011)(Clearances, Creepage Distances and Solid Insulation)	-	500	-
(Cl.30 of IS 302-2-21:2011)(Resistance to Heat & Fire)	-	1500	-
(Cl.30 of IS 302-2-21:2011)(Resistance to Heat & Fire)	-	1500	-
(Cl.31 of IS 302-2-21:2011)(Resistance to Rusting)	-	750	-
(Cl.15 of IS 2082:2018)(Verification of the Rated Capacity)	-	2250	-
(Cl.16 of IS 2082:2018)(Standing Loss per 24 Hours)	-	6000	-
(Cl.17 of IS 2082:2018)(Hot Water Output)	-	3000	-
(Cl.18 of IS 2082:2018)( Reheating Time)	-	2500	-
(Cl.19 of IS 2082:2018)(Mixing Factor)	-	1250	-
(Cl.20 of IS 2082:2018)(Deviation of Dial Calibration)	-	1500	-
(Cl.21 of IS 2082:2018)(Cyclic Temperature Variation)	-	1000	-
(Cl.22 of IS 2082:2018)(Finish)	-	1000	-
7(Marking)	-	1250	-
7(Marking)	-	1250	-
7(Marking)	-	1250	-
7(Marking)	-	1250	-
7(Marking)	-	1250	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	750	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	750	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	750	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	750	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	750	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	750	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	750	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	500	-
Cl.16 of IS 302-2-21-2018(Leakage current and Electric strength (After humidity): Electric Strentgh )	-	1000	-
Cl.22 of IS 2082:2018(Finish)	-	1000	-
Cl.21 of IS 2082:2018(Cyclic Temperature Variation)	-	1000	-
Cl.20 of IS 2082:2018(Deviation of Dial Calibration)	-	1500	-
Cl.19 of IS 2082:2018(Mixing Factor)	-	1250	-
Cl.18 of IS 2082:2018( Reheating Time)	-	2500	-
Cl.17 of IS 2082:2018(Hot Water Output)	-	3000	-
Cl.16 of IS 2082:2018(Standing Loss per 24 Hours)	-	6000	-
Cl.15 of IS 2082:2018(Verification of the Rated Capacity)	-	2250	-
Cl.31 of IS 302-2-21:2018(Resistance to Rusting)	-	375	-
Cl.30.2 of IS 302-1:2008(Resistance to Heat & Fire : Glow wire test )	-	750	-
Cl.30.1 of IS 302-1:2008(Resistance to Heat & Fire : Ball pressure test )	-	750	-
Cl.29.2 of IS 302-1:2008(Clearances, Creepage Distances and Solid Insulation : Creepage distance )	-	250	-
Cl.29.1 of IS 302-1:2008(Clearances, Creepage Distances and Solid Insulation : Clearance distance )	-	250	-
Cl.28 of IS 302-2-21:2018(Screws & Connections)	-	500	-
Cl.27.5 of IS 302-1:2008(Provision for Earthing : ECR )	-	250	-
Cl.27 of IS 302-2-21:2018(Provision for Earthing)	-	250	-
Cl.26 of IS 302-2-21: 2018(Terminals for External Conductors)	-	750	-
Cl.25.18 of IS 302-1:2008(Supply Connection & External Flexible Cords)	-	90	-
Cl.25.15 of IS 302-1:2008(Supply Connection & External Flexible Cords : Cord grip test - displacement )	-	90	-
Cl.25.15 of IS 302-1:2008(Supply Connection & External Flexible Cords : Cord grip test )	-	90	-
Cl.25.12 of IS 302-1:2008(Supply Connection & External Flexible Cords : Moulding of supply cord )	-	90	-
Cl.25.10 of IS 302-1:2008(Supply Connection & External Flexible Cords : Colour of Earthing conductor )	-	90	-
Cl.25.8 of IS 302-2-21:2018(Supply Connection & External Flexible Cords : Resistance of supply cord )	-	90	-
Cl.25.5 of IS 302-1:2008(Supply Connection & External Flexible Cords : Type of attachment )	-	90	-
Cl.25 of IS 302-2-21:2018(Supply Connection & External Flexible Cords : connection to the supply mains)	-	90	-
Cl.24.102 of IS 302-221:2018(Component : Operation of thermal cut-out )	-	250	-
Cl.24.101 of IS302-221:2018(Component : Location of non self reseting thermal cut out )	-	250	-
Cl.24of IS 302-221:2018(Component : Relevent Indian standards )	-	250	-
Cl. 23 of IS 302-1:2008(Internal Wiring : color identification for earthing conductor )	-	250	-
Cl. 23 of IS 302-1:2008(Internal Wiring )	-	250	-
Cl.22.111 of IS 302-2-21:2018(Construction : Resistance to vacuum )	-	55	-
Cl.22.110 of IS 302-2-21:2018(Construction : meterial of connections )	-	55	-
Cl.22.110 of IS 302-2-21:2018(Construction : Material of Inner conatiner )	-	55	-
Cl.22.109 of IS 302-2-21:2018(Construction : Drain for appliance having a capacity of more than 15 liter)	-	55	-
Cl.22.108 of IS 302-2-21:2018(Construction : fixing to wall )	-	55	-
Cl.22.107 of IS 302-2-21:2018(Construction : Position of Heating elements and thermal control sensor)	-	55	-
Cl.22.106 of IS 302-2-21:2018(Construction : Operation of thermal cut- out )	-	55	-
Cl.22.104 of IS 302-2-21:2018(Construction : Outlet of open outlet heater )	-	55	-
Cl.22.103 of IS 302-2-21:2018(Construction : Operation of Pressure relieve devices )	-	55	-
Cl.22.102 of IS 302-2-21:2018(Construction : repeated drawing of water temp )	-	55	-
Cl.22.101 of IS 302-2-21:2018(Construction : rated pressure of closed water heater )	-	55	-
Cl.22.47 of IS 302-2-21:2018 (Construction : Water pressure test )	-	55	-
Cl.22.44 of IS 302-1:2008(Construction : Shape and decoration of enclosure)	-	55	-
Cl.22.34, Cl 22.35 of IS 302-1:2008(Construction : Shaft of operating Knobs )	-	55	-
Cl.22.33 of IS 302-1:2008(Construction : Direct contact of liquids )	-	55	-
Cl 22.26 ,Cl.22.28, Cl 22.29, Cl 22.30 , Cl 22.31, Cl 22.32 of IS 302-1:2008(Construction : Supplymentry/ double / reinforced insulation for Class II/ Class III appliance )	-	55	-
Cl.22.18 Of IS 302-1:2008(Construction : Resistance to corrosion )	-	55	-
Cl.22.17 of IS 302-1:2008(Construction : Spacers )	-	55	-
Cl.22.14 of IS 302-1:2008(Construction : ragged or sharp edges)	-	55	-
Cl.22.12 of IS 302-1:2008(Construction : Fixing of Handle, knob, grips, levers and similar parts)	-	55	-
Cl.22.11 of IS 302-1:2008(Construction : Fixing of non detachable part )	-	55	-
Cl.22.7 of IS 302-1:2008(Construction: adequate safeguards against the risk of excessive pressure)	-	55	-
Cl.22.6 of IS 302-2-21:2018(Construction : Size of drain hole )	-	55	-
Cl.22.6 of IS 302-1:2008(Construction : Effect of water on 3 insulation )	-	55	-
Cl.22.2 of IS 302-1:2008(Construction : Provision to ensure all pole disconnection )	-	55	-
Cl.22.1 of IS 302-1:2008(Construction : IP test )	-	55	-
Cl.21.2 of IS 302-1:2008(Mechanical strength : prevent penetration by sharp implements. )	-	375	-
Cl.21.1 of IS 302-1:2008(Mechanical strength : Rough handling in normal use)	-	375	-
Cl.20 of IS 302-1:2008(Stability & Mechanical Hazards)	-	500	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : leakage from container during test)	-	200	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : High Voltage )	-	200	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : Insulation of the supply cable or cord)	-	200	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : Wall ceiling temp. of test corner )	-	200	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : emission of flame or molten metal or poisonous or ignitable gas )	-	200	-
Cl.15 of IS 302-2-21-2018(Moisture Resistance)	-	1000	-
Cl.14 of IS 302-2-21:2018(Transient Over Voltages)	-	1000	-
Cl.13 of IS 302-2-21:2018(Leakage Current )	-	500	-
Cl.11 of 302-2-21:2018(Heating : Room Temp.)	-	330	-
Cl.11 of 302-2-21:2018(Heating : Temp of Rubber or PVC insulation of internal and external wiring)	-	330	-
Cl.11 of 302-2-21:2018(Heating : Temp of Walls, ceilings and floor of the test corner )	-	330	-
Cl.10 of IS 302-2-21: 2018(Power Input & Current)	-	1000	-
Cl.8 of IS 302-2-21:2018(Protection Against Access to Live Parts)	-	500	-
7.101(Marking : Indifiction of water inlet and water outlet )	-	50	-
7.14(Marking : Legibility and durability)	-	50	-
7.13(Marking : Official language of Instruction )	-	50	-
7.11(Marking : Indication of controls )	-	50	-
7.8(Marking : Terminals )	-	50	-
7.6(Marking : Symbol used )	-	50	-
7.1(Marking : Warning for Open- outlet )	-	50	-
7.1(Marking : Statement for pressure reducing valve ( For rated pressure less than 0.6 MPa))	-	50	-
7.1(Marking : Statement for a pressure-relief device)	-	50	-
7.1(Marking : Rated capacity)	-	50	-
7.1(Marking : Rated pressure)	-	50	-
7.1(Marking : Country of manufacture)	-	50	-
7.1(Marking: IP Number)	-	50	-
7.1(Marking: Symbol for Class II)	-	50	-
7.1(Marking: Model or type reference)	-	50	-
7.1(Marking: Name, trademark or identification mark of manufacturer )	-	50	-
7.1(Marking : Rated power input)	-	50	-
7.1(Marking : Symbol for nature of supply )	-	50	-
7.1(Marking : Rated Voltage )	-	50	-
7(Marking)	-	1250	-
7(Marking)	-	1250	-
7(Marking)	-	1250	-
7(Marking)	-	1250	-
7(Marking)	-	1250	-
7(Marking)	-	1250	-
7(Marking)	-	1250	-
7(Marking)	-	1250	-
7(Marking)	-	1250	-
7(Marking)	-	1250	-
7(Marking)	-	1250	-
7(Marking)	-	1250	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl.24ofIS302-221:2011)(Component)	-	750	-
(Cl.24ofIS302-221:2011)(Component)	-	750	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	750	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	750	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	750	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	750	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	750	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	750	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	750	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	500	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	500	-
Cl.16 of IS 302-2-21-2018(Leakage current and Electric strength (After humidity): Leakage current )	-	1000	-
Cl.13 of IS 302-2-21:2018(3 Strength at Operating Temperature)	-	500	-

Complete

23 Jun, 2025

-
Restricted to Stainless steel tank only

IS 10322 : Part 5 : Sec 1 (2012)

Luminaires: Part 5 particular requirements: Sec 1 fixed general purpose luminaires (First Revision)

48000.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Marking)	-	1000.00	N/A
4(General Test Requireements)	-	500.00	N/A
5(Classification of Luminaires')	-	500.00	N/A
7.0(Construction)	-	3000.00	N/A
8.0(Creepage Distance and Clearances)	-	3000.00	N/A
9.0(Provision for earthing)	-	5000.00	N/A
10.0(Terminals)	-	5000.00	N/A
11.0(External & Internal Wiring)	-	2000.00	N/A
12.0(Protection against electric shock)	-	3000.00	N/A
13.0(Endurance Tests and Thermal Tests)	-	10000.00	N/A
14.0(Resistance to Dust & Moisture)	-	5000.00	N/A
15.0(Insulation Resistance and Electric Strength)	-	5000.00	N/A
16.0(Resistance to Heat , fire and tracking)	-	5000.00	N/A

Complete

23 Jun, 2025

-
Excluding Photometric test (Cl.17)

IS 374 (2019)

Specification for electric ceiling type fans and regulators (Third Revision)

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	200	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	200	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	200	-
8.1(Marking (as per Cl. 7 of IS 302-2-80:2017))	-	100	-
8.1,a(Marking )	-	100	-
8.1,b(Marking )	-	100	-
8.1,c(Marking )	-	100	-
8.1,d(Marking )	-	100	-
8.1,e(Marking )	-	100	-
8.1,f(Marking )	-	100	-
8.1,g(Marking )	-	100	-
8.2(Marking )	-	100	-
8.3,a(Marking )	-	100	-
8.3,b(Marking )	-	100	-
8.3,c(Marking )	-	100	-
8.3,d(Marking )	-	100	-
8.3,e(Marking )	-	100	-
8.4(Marking )	-	100	-
8(Marking (as per Cl. 7.1 of IS 302-2-80:2017))	-	1700	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1 (f) of IS 302-1:2008))	-	1700	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008))	-	1700	-
6.2(Rating)	-	2500	-500
9(Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-	500	-
9(Power Input & current (as per Cl.10 of IS 302-2-80 :2017))	-	250	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	750	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	750	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	750	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	400	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	400	-
9(Transient over Voltage (as per Cl.14 of IS 302-2-80 :2017))	-	1000	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	1200	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	1200	-
9(Overload protection of transformers and associated circuits (as per Cl.17 of IS 302-2-80 :2017))	-	500	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	1300	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	1300	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	1300	-
9(Staibilty and mechanical hazards (as per Cl.20.102, Table 101 of IS 302-2-80 :2017))	-	400	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	400	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	400	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	200	-
9(Construction (as per Cl.22.101 of IS 302-2-80 :2017))	-	200	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	400	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	400	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	400	-
9(Components (as per Cl.24.103 of IS 302-2-80 :2017))	-	200	-
9(Components (as per Cl.24.104 of IS 302-2-80 :2017))	-	200	-
9(Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017))	-	400	-
9(Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017))	-	500	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	500	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	500	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	500	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	500	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	500	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	500	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	500	-
9(Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-	500	-
9(Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017))	-	500	-
9(Radiation, Toxicity and similar Hazards (Cl.32 of IS 302-2-80 :2017))	-	500	-
10.1(Speed Regulators)	-	375	-
10.2(Speed Regulators)	-	375	-
10.2(Speed Regulators)	-	375	-
10.2(Speed Regulators)	-	375	-
10.3(Speed Regulators)	-	375	-
10.4(Speed Regulators)	-	375	-
10.5(Speed Regulators)	-	375	-
10.6(Speed Regulators)	-	375	-
10.7(Speed Regulators)	-	375	-
10.7(Speed Regulators)	-	375	-
10.8(Speed Regulators)	-	375	-
11.1(Starting)	-	500	-
11.2(Starting)	-	500	-
12(Interchangeability)	-	2500	-
13(Silent Operation)	-	2500	-
14.3 & Table 1(Test for Air Performance)	-	2000	-
14.3 & Table 1(Test for Air Performance)	-	2000	-
14.4(Measurement of Speed of the Fan )	-	1500	-
14.4(Measurement of Speed of the Fan )	-	3000	-
14.5(Measurement of Power factor and Power Input)	-	1500	-
14.5(Measurement of Power factor and Power Input)	-	1500	-
16(Endurance Test)	-	5000	-
16(Endurance Test)	-	5000	-
16(Endurance Test)	-	5000	-
16(Endurance Test)	-	5000	-
16(Endurance Test)	-	5000	-
16(Endurance Test)	-	5000	-
17(Test for Harmonic Distortion)	-	2000	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	750	-
9(Screw and connections (as per Cl.28 of IS 302-2-80 :2017))	-	500	-
10.8(Speed Regulators)	-	375	-
11.2(Starting)	-	500	-
14.3 & Table 1(Test for Air Performance)	-	2000	-
14.4(Measurement of Speed of the Fan )	-	3000	-
14.4(Measurement of Speed of the Fan )	-	3000	-
14.5(Measurement of Power factor and Power Input)	-	5000	-
16(Endurance Test)	-	5000	-
16(Endurance Test)	-	5000	-
17(Test for Harmonic Distortion)	-	2000	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	200	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	200	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	200	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	200	-
8.1(Marking (as per Cl. 7 of IS 302-2-80:2017))	-	100	-
8.1,a(Marking )	-	100	-
8.1,b(Marking )	-	100	-
8.3,c(Marking )	-	100	-
8.1,d(Marking )	-	100	-
8.1,f(Marking )	-	100	-
8.1,g(Marking )	-	100	-
8.2(Marking )	-	100	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008))	-	100	-
8(Marking (as per Cl.7.12.1(a) of IS 302-2-80:2017))	-	100	-
6.2(Rating)	-	2500	-
9(Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-	500	-
9(Power Input & current (as per Cl.10 of IS 302-2-80 :2017))	-	250	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	750	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	750	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	750	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	400	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	400	-
9(Transient over Voltage (as per Cl.14 of IS 302-2-80 :2017))	-	1000	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	1200	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	1200	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	1300	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	1300	-
9(Staibilty and mechanical hazards (as per Cl.20.102, Table 101 of IS 302-2-80 :2017))	-	400	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-1:2008))	-	400	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-1:2008))	-	400	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017))	-	400	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	400	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	400	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	400	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	400	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	400	-
9(Construction (as per Cl.22.101 of IS 302-2-80 :2017))	-	200	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	400	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	400	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	400	-
9(Components (as per Cl.24.103 of IS 302-2-80 :2017))	-	200	-
9(Components (as per Cl.24.104 of IS 302-2-80 :2017))	-	200	-
9(Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017))	-	400	-
9(Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017))	-	500	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	500	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	500	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	500	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	500	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	500	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	500	-
9(Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-	500	-
9(Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017))	-	500	-
9(Radiation, Toxicity and similar Hazards (Cl.32 of IS 302-2-80 :2017))	-	500	-
10.2(Speed Regulators)	-	375	-
16(Endurance Test)	-	5000	-
16(Endurance Test)	-	5000	-
16(Endurance Test)	-	5000	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	200	-
8(Marking (as per Cl.7.12.1(a) of IS 302-2-80:2017))	-	100	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017))	-	400	-
9(Screw and connections (as per Cl.28 of IS 302-2-80 :2017))	-	500	-
10.1(Speed Regulators)	-	375	-
10.2(Speed Regulators)	-	375	-
10.4(Speed Regulators)	-	375	-
10.7(Speed Regulators)	-	375	-
12(Interchangeability)	-	2500	-

Complete

23 Jun, 2025

-
-

IS 15885 : Part 2 : Sec 13 (2012)

Safety of lamp controlgear: Part 2 particular requirements: Sec 13 d.c. or a.c. supplied electronic controlgear for led modules

48000.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	2000.00	N/A
8(Protection against accidental contact with live parts)	-	5000.00	N/A
9(Terminals)	-	5000.00	N/A
10(PROVISION FOR EARTHING)	-	5000.00	N/A
11(MOISTURE RESISTANCE)	-	5000.00	N/A
12(Electric Strength)	-	4000.00	N/A
14(Fault conditions)	-	3000.00	N/A
15(Transformer heating)	-	3000.00	N/A
16(Construction)	-	2000.00	N/A
17(Creepage distance and clearances)	-	2000.00	N/A
18(Screws, current carrying parts and connections)	-	2000.00	N/A
19(Resistance to heat, fire and tracking)	-	5000.00	N/A
20(Resistance to corrosion)	-	2000.00	N/A
13(Thermal endurance test for winding of ballasts)	-	3000.00	N/A

Complete

23 Jun, 2025

-
Including Amd.01 w.e.f. 21-07-2017

IS 302 : Part 2 : Sec 14 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 14 electric kitchen machines (First Revision)

14700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1 )	-	500	-
6(Classification- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.3(Marking- IS 302-1)	-	500	-
7.4(Marking- IS 302-1)	-	500	-
7.6(Marking- IS 302-1)	-	500	-
7.7(Marking- IS 302-1)	-	500	-
7.8(Marking- IS 302-1)	-	500	-
7.11(Marking- IS 302-1)	-	500	-
7.12(Marking- IS 302-1)	-	500	-
7.13(Marking- IS 302-1)	-	500	-
7.14(Marking- IS 302-1)	-	500	-
7.15(Marking- IS 302-1)	-	500	-
7.101(Marking)	-	500	-
8( Protection Against Electric Shock, IS 302-1)	-	500	-
10(Power Input and Current, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	1000	-
14(Transient Over Voltages, IS 302-1)	-	1000	-
15.1(Moisture Resistance, IS 302-1)	-	1500	-
15.2(Moisture Resistance, IS 302-1)	-	1500	-
15(Moisture Resistance, IS 302-1)	-	1500	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	2000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	2000	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	1500	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	1500	-
19.7(Abnormal Operation, IS 302-1)	-	750	-
19.9(Abnormal Operation, IS 302-1)	-	750	-
19.1(Abnormal Operation, IS 302-1)	-	750	-
19.101(Abnormal Operation)	-	750	-
19.102(Abnormal Operation)	-	750	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	1000	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	1000	-
20.101(Stability & Mechanical Hazards)	-	1000	-
20.102(Stability & Mechanical Hazards)	-	1000	-
20.103(Stability & Mechanical Hazards)	-	1000	-
20.104(Stability & Mechanical Hazards)	-	1000	-
20.105(Stability & Mechanical Hazards)	-	1000	-
20.106(Stability & Mechanical Hazards)	-	1000	-
20.107(Stability & Mechanical Hazards)	-	1000	-
20.108(Stability & Mechanical Hazards)	-	1000	-
20.109(Stability & Mechanical Hazards)	-	1000	-
20.110(Stability & Mechanical Hazards)	-	1000	-
20.111(Stability & Mechanical Hazards)	-	1000	-
20.112(Stability & Mechanical Hazards)	-	1000	-
20.113(Stability & Mechanical Hazards)	-	1000	-
20.114(Stability & Mechanical Hazards)	-	1000	-
20.115(Stability & Mechanical Hazards)	-	1000	-
20.116(Stability & Mechanical Hazards)	-	1000	-
21.1(Mechanical Strength, IS 302-1)	-	750	-
21.2(Mechanical Strength, IS 302-1)	-	750	-
22(Construction, IS 302-1)	-	500	-
22.101(Construction)	-	500	-
22.102(Construction)	-	500	-
23.1(Internal Wiring, IS 302-1)	-	500	-
23.2(Internal Wiring, IS 302-1)	-	500	-
23.3(Internal Wiring, IS 302-1)	-	500	-
23.4(Internal Wiring, IS 302-1)	-	500	-
23.5(Internal Wiring, IS 302-1)	-	500	-
23.6(Internal Wiring, IS 302-1)	-	500	-
23.7(Internal Wiring, IS 302-1)	-	500	-
23.8(Internal Wiring, IS 302-1)	-	500	-
23.9(Internal Wiring, IS 302-1)	-	500	-
23.10(Internal Wiring, IS 302-1)	-	500	-
24.1(Components, IS 302-1)	-	750	-
24.2(Components, IS 302-1)	-	750	-
24.5(Components, IS 302-1)	-	750	-
24.6(Components, IS 302-1)	-	750	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	750	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	750	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	750	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	750	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	750	-
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	750	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	750	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	750	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	750	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	750	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	750	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	750	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	750	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	750	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	750	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	750	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	750	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	750	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	750	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	750	-
26(Terminals for External Conductors, IS 302-1)	-	750	-
27(Provision for Earthing, IS 302-1)	-	500	-
27.2(Provision for Earthing, IS 302-1)	-	500	-
27.3(Provision for Earthing, IS 302-1)	-	500	-
27.4(Provision for Earthing, IS 302-1)	-	500	-
27.5(Provision for Earthing, IS 302-1)	-	500	-
28(Screws & Connections, IS 302-1)	-	500	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	500	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	500	-
30.1(Resistance to Heat and Fire, IS 302-1)	-	1000	-
30.2(Resistance to Heat and Fire, IS 302-1)	-	1000	-
31(Resistance of Rusting, IS 302-1)	-	750	-
32(Radiation, Toxicity and similar Hazard IS 302-1)	-	500	-
11(Heating, IS 302-1)	-	1000	-
19.8(Abnormal Operation, IS 302-1)	-	750	-

Complete

23 Jun, 2025

-
-

Bureau of Indian Standards

The National Standards Body of India

DELHI TEST HOUSE KUNDLI

PLOT NO 50 phase IV sector 57 hsiidc industrial area kundli, Sonipat, Sonipat, Haryana, 131028

9810442016 ag@delhitesthouse.com

Scope List