BIS - LIMS (Laboratory Information Management System)

Bharat Test House Pvt Ltd 1474 Sonipat Haryana

1474, HSIIDC Rai Industrial Estate, SONIPAT, Sonipat, Haryana, 131029

9310314585 bthrai@bharattesthouse.com

Scope List

Reset

190 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

181

IS 16242 : Part 1 (2014)

Uninterruptible power systems (UPS): Part 1 general and safety requirements for UPS

160000 View breakup
Rs.80000/- for ≤ 5KVA Rs.115000/- for ≥ 5KVA (5% discount for BIS). Rs.1,85,000/- for > 10 KVA (for 3 phase)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.5(Components)	-	0	-
4.6(Power interface)	-	5000	5% discount for BIS
4.7(Marking & instructions)	-	2000	5% discount for BIS
5.1(Protection against shock and energy hazards)	-	4000	5% discount for BIS
5.2(Requirement of auxiliary circuits)	-	4000	5% discount for BIS
5.3(Protective earthing and bonding)	-	7000	5% discount for BIS
5.4(AC and DC power isolation)	-	3000	5% discount for BIS
5.5(Over current and earth fault condition)	-	5000	5% discount for BIS
5.6(Safety interlocks)	-	6000	5% discount for BIS
5.7(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	6000	5% discount for BIS
6.1(Wiring, connections and supply)	-	12000	5% discount for BIS
6.2(Connection to power)	-	13000	5% discount for BIS
6.3(Wiring terminals for external power conductors)	-	10000	5% discount for BIS
7.1(Enclosure)	-	1000	5% discount for BIS
7.2(STABILITY)	-	2000	5% discount for BIS
7.3(MECHANICAL STRENGTH)	-	2000	5% discount for BIS
7.4(Construction details)	-	5000	5% discount for BIS
7.5(Resistance to fire)	-	7000	5% discount for BIS
7.6(Battery location)	-	3000	5% discount for BIS
7.7(Temperature rise)	-	5000	5% discount for BIS
8.1(General procision for earth leakage)	-	7000	5% discount for BIS
8.2(Electric Strength)	-	8000	5% discount for BIS
8.3(Abnormal operating and fault conditions)	-	15000	5% discount for BIS
9.0(Connection to telecommunication networks)	-	28000	5% discount for BIS

19 Mar, 2029

-
Single Phase and 3 phase. Except : Cl. 4.5 : Components Cl. 1.5 radio frequency electromagnetic field, amplitude modulated, immunity to power frequency magnetic field, immunity to low frequency signals, Cl. 5.6.1 Operator protection, Cl.7.6.7 & Annex M_Ventilation,Cl. 2.10.5.12 Insulated winding wires

182

IS 10322 : Part 5 : Sec 7 (2017)

Luminaires: Part 5 particular requirements: Sec 7 lighting chains (First Revision)

65000 View breakup
Rs.65000/- (5% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
20.4(General Test Requireements)	-	0	-
20.5(Classification of Luminaires')	-	0	-
20.6(Marking)	-	500	5% discount for BIS
20.7(Construction)	-	10000	5% discount for BIS
20.8(Creepage Distance and Clearances)	-	2500	5% discount for BIS
20.9(Provision for earthing)	-	2500	5% discount for BIS
20.10(Terminals)	-	2000	5% discount for BIS
20.11(External & Internal Wiring)	-	2500	5% discount for BIS
20.12(Protection against electric shock)	-	5000	5% discount for BIS
20.13(Endurance Tests and Thermal Tests)	-	5000	5% discount for BIS
20.14(Resistance to Dust & Moisture)	-	20000	5% discount for BIS
20.15(Insulation Resistance and Electric Strength)	-	10000	5% discount for BIS
20.16(Resistance to Heat , fire and tracking)	-	5000	5% discount for BIS

19 Mar, 2029

-
REVISED VERSION INCLUDED w.e.f. 10.07.2018 Excluding : (cl.20.7.4 & 6.14.2 of AnnexA)-Electrical Endurance (CBC) ( cl.20.7.4 & cl.6.14.3 of Annex-A)-Bending(Non-rewireable connector) (cl.20.7.8 & IEC 61347-2- 11)- Control Unit

183

IS 14286 : Part 1 : Sec 1 (2019)

Terrestrial photovoltaic (PV) modules - Design qualification and type approval: Part 1 test requirements: Sec 1 special requirements for testing of crystalline silicon photovoltaic (Pv) modules (Second Revision)

Terrestrial Photovoltaic (PV) Modules

750000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11.1(Visual inspection (MQT 01))	-	7500	-
11.2(Maximum power determination (MQT 02))	-	7500	-
11.3(Insulation test (MQT 03))	-	15000	-
11.4(Measurement of temperature coefficients (MQT 04))	-	55000	-
11.5(Measurement of nominal module operating temperature (NMOT) (MQT 05))	-	55000	-
11.6(Performance at STC and NMOT (MQT 06))	-	60000	-
11.7(Performance at low irradiance (MQT 07))	-	57500	-
11.8(Outdoor exposure test (MQT 08))	-	32500	-
11.9(Hot-spot endurance test (MQT 09))	-	80000	-
11.1(UV preconditioning test (MQT 10))	-	37500	-
11.11(Thermal cycling test (MQT 11))	-	50000	-
11.12(Humidity-freeze test (MQT 12))	-	57500	-
11.13(Damp heat test (MQT 13))	-	42500	-
11.14(Robustness of terminations (MQT 14))	-	20000	-
11.15(Wet leakage current test (MQT 15))	-	25000	-
11.16(Static mechanical load test (MQT 16))	-	25000	-
11.17(Hail test (MQT 17))	-	52500	-
11.18(Bypass diode thermal test (MQT 18))	-	27500	-
11.19(Stabilization (MQT 19))	-	42500	-

19 Mar, 2029

-
Included w.e.f 13.05.2020

184

IS 14286 : Part 1 : Sec 3 (2019)

Terrestrial photovoltaic (PV) modules - Design qualification and type approval: Part 1 test requirements: Sec 3 special requirements for testing of thin - Film amorphous silicon based photovoltaic (Pv) modules (Second Revision)

750000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5 IS 14286( Marking and Documentation)	-	0	-
11.1 IS 14286( Visual inspection)	-	7500	-
11.2 IS 14286( Maximum power determination)	-	7500	-
11.3 IS 14286( Insulation Test)	-	15000	-
11.4 IS 14286( Measurement of temperature coefficients)	-	55000	-
11.5 IS 14286( Measurement of nominal module operating temperature (NMOT))	-	55000	-
11.6 IS 14286( Performance at STC and NMOT)	-	60000	-
11.7 IS 14286( Performance at low irradiance)	-	57500	-
11.8 IS 14286( Outdoor exposure Test)	-	32500	-
11.9 IS 14286( Hot-spot endurance test)	-	80000	-
11.10 IS 14286( UV Preconditioning test )	-	37500	-
11.11 IS 14286( Thermal cycling test)	-	50000	-
11.12 IS 14286( Humidity-freeze test)	-	57500	-
11.13 IS 14286(Damp heat test)	-	42500	-
11.14, Table 1 IS 14286( Robutness of terminations test - Retention of Junction Box on Mounting Surface - Test of Cord Anchorage)	-	20000	-
11.15 IS 14286( Wet leakage current test)	-	25000	-
11.16(Static mechanical load test (MQT 16))	-	25000	-
11.17, Table 3 & 4, IS 14286( Hail test)	-	52500	-
11.18 IS 14286( Bypass diode testing)	-	27500	-
11.19 IS 14286( Stabilization )	-	42500	-
5 IS 14286( Marking and Documentation)	-	0	5% discount for BIS
11.1 IS 14286( Visual inspection)	-	7500	5% discount for BIS
11.2 IS 14286( Maximum power determination)	-	7500	5% discount for BIS
11.3 IS 14286( Insulation Test)	-	15000	5% discount for BIS
11.4 IS 14286( Measurement of temperature coefficients)	-	55000	5% discount for BIS
11.5 IS 14286( Measurement of nominal module operating temperature (NMOT))	-	55000	5% discount for BIS
11.6 IS 14286( Performance at STC and NMOT)	-	60000	5% discount for BIS
11.7 IS 14286( Performance at low irradiance)	-	57500	5% discount for BIS
11.8 IS 14286( Outdoor exposure Test)	-	32500	5% discount for BIS
11.9 IS 14286( Hot-spot endurance test)	-	80000	5% discount for BIS
11.10 IS 14286( UV Preconditioning test )	-	37500	5% discount for BIS
11.11 IS 14286( Thermal cycling test)	-	50000	5% discount for BIS
11.12 IS 14286( Humidity-freeze test)	-	57500	5% discount for BIS
11.13 IS 14286(Damp heat test)	-	42500	5% discount for BIS
11.14, Table 1 IS 14286( Robutness of terminations test - Retention of Junction Box on Mounting Surface - Test of Cord Anchorage)	-	20000	5% discount for BIS
11.15 IS 14286( Wet leakage current test)	-	25000	5% discount for BIS
11.16(Static mechanical load test (MQT 16))	-	25000	5% discount for BIS
11.17, Table 3 & 4, IS 14286( Hail test)	-	52500	5% discount for BIS
11.18 IS 14286( Bypass diode testing)	-	27500	5% discount for BIS
11.19 IS 14286( Stabilization )	-	42500	5% discount for BIS

19 Mar, 2029

-
-

185

IS 14286 : Part 1 : Sec 4 (2019)

Terrestrial photovoltaic (PV) modules - Design qualification and type approval: Part 1 test requirements: Sec 4 special requirements for testing of thin - Film Cu(In,ga)(S,se)2 based photovoltaic (Pv) modules (Second Revision)

750000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11.3(Insulation test (MQT 03))	-	15000	-
11.4(Measurement of temperature coefficients (MQT 04))	-	55000	-
11.5(Measurement of nominal module operating temperature (NMOT) (MQT 05))	-	55000	-
11.6(Performance at STC and NMOT (MQT 06))	-	60000	-
11.7(Performance at low irradiance (MQT 07))	-	57500	-
11.8(Outdoor exposure test (MQT 08))	-	32500	-
11.9(Hot-spot endurance test (MQT 09))	-	80000	-
11.1(UV preconditioning test (MQT 10))	-	37500	-
11.11(Thermal cycling test (MQT 11))	-	50000	-
11.12(Humidity-freeze test (MQT 12))	-	57500	-
11.13(Damp heat test (MQT 13))	-	42500	-
11.14(Robustness of terminations (MQT 14))	-	20000	-
11.15(Wet leakage current test (MQT 15))	-	25000	-
11.16(Static mechanical load test (MQT 16))	-	25000	-
11.17(Hail test (MQT 17))	-	52500	-
11.18(Bypass diode thermal test (MQT 18))	-	27500	-
11.19(Stabilization (MQT 19))	-	42500	-

19 Mar, 2029

-
-

186

IS 16169 (2019)

Utility - Interconnected photovoltaic inverters - Test procedure of islanding prevention measures (First Revision)

300000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Test for single or multi-phase inverter)	-	300000	5% discount for BIS
Annex A(Islanding as it applies to PV systems)	-	0	N/A
Annex B(Test for independent islanding device)	-	0	N/A

19 Mar, 2029

-
Included w.e.f 13.05.2020

187

IS 1474 (1959)

Specification for commercial refrigerators

310000 View breakup
(5% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.3.1(Gross Volume)	-	5000	-
3.3(Volume of evaporator space)	-	5000	-
3.5(Volume of fixed shelves and partitions)	-	5000	-
3.6(Computation of shelf area)	-	5000	-
3.7(Net volume)	-	5000	-
7.5.1(Pressure Test)	-	36000	-
7.5.3(Insulation Resistance Test (Assembly Test))	-	18000	-
7.5.4(Thermal Insulation Test)	-	85000	-
7.5.5(Condensation Test)	-	65000	-
7.5.6(Rating Test)	-	61000	-
7.5.7(Test for Adequate Rating of Compressor Motor)	-	10000	-
7.5.8(Door Seal Test)	-	10000	-

19 Mar, 2029

-
Included w.e.f 07.12.2020

188

IS 10322 : Part 5 : Sec 4 (1987)

Specification for luminaires: Part 5 particular requirements: Sec 4 portable general purpose luminaires

Portable General Purpose Luminaires

42000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking)	-	500	5% discount for BIS
6(Construction)	-	4500	5% discount for BIS
7(Creepage Distance And Clearances)	-	1000	5% discount for BIS
8(Provision for Earthing)	-	1000	5% discount for BIS
9(Terminals)	-	3000	5% discount for BIS
10(External & Internal Wiring)	-	2000	5% discount for BIS
11(Protection Against Electric Shock )	-	1000	5% discount for BIS
13.3(Mechanical Strength Test )	-	3000	5% discount for BIS
13.4(Endurance Test and Thermal test)	-	3000	5% discount for BIS
13.5(Resistance To Dust & Moisture)	-	3000	5% discount for BIS
13.6(Insulation Resistance and Electric Strength)	-	3000	5% discount for BIS
13.7(Resistance to Heat, Fire & Tracking)	-	3000	5% discount for BIS
13.8(Photometric Test)	-	14000	5% discount for BIS

19 Mar, 2029

-
-

189

IS 7098 : Part 1 (1988)

Specification for crosslinked polyethylene insulated pvc sheathed cables: Part 1 for working voltages up to and including 1100 volts (First Revision)

28000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(CONDUCTOR: MATERIALS)	-	0	-
4(INSULATION : MATERIALS)	-	0	-
5.1(FILLER AND INNER SHEATH)	-	0	-
5.2(FILLER AND INNER SHEATH)	-	0	-
6(ARMOURING)	-	0	-
7(OUTER SHEATH)	-	0	-
8.1(CONDUCTOR: CONSTRUCTION)	-	0	-
8.2(PROTECTIVE BARRIER)	-	0	-
8.3(SIZE OF NEUTRAL CONDUCTOR)	-	0	-
9.1(Insulation Applied by extrusicn)	-	0	-
9.2(Thickness of Insulation - Average)	-	1000	-
9.3(Thickness of Insulation - Minimum)	-	1000	-
9.4(Application of Insulation)	-	0	-
10.1(Core Identification)	-	0	-
10.2(Core Identification- Neutral)	-	0	-
10.3(Core Identification by number )	-	0	-
10.4(Core Identification by number - Neutral )	-	0	-
11(LAVING UP OF CORES)	-	0	-
12.1 & 12.2(Inner sheath : Application)	-	0	-
12.3(Thickness of Inner Sheath)	-	1000	-
13.1(Armouring: Application)	-	0	-
13.1.2(Armouring: Coverage )	-	0	-
13.1.3(Armouring: Direction of Lay )	-	0	-
13.2(Type of armour )	-	0	-
13.3(Armouring : Dimensions -Wire Diameter)	-	1000	-
13.3(Armouring : Dimensions -Formed wire )	-	1000	-
13.4(Armour: Joint)	-	0	-
13.5(Armouring : Resistance Test)	-	800	-
13.6 a)(ARMOURING: Tensile Strength)	-	1000	-
13.6 b)(ARMOURING: Elongation )	-	1000	-
13.6 c)(ARMOURING: Torsion Test (For round wire ) )	-	750	-
13.6 d)(ARMOURING: Winding Test(For formed wire))	-	750	-
13.6 e)(ARMOURING: Uniformity of zinc coating)	-	750	-
13.6 f)(ARMOURING: Mass of zinc coating )	-	750	-
13.6 g)(ARMOURING: Resistivity)	-	800	-
14.1(Outer Sheath : Application)	-	0	-
14.2(Colour of outer sheath)	-	0	-
14.3(Thickness of outer sheath - AVERAGE)	-	1000	-
14.3(Thickness of outer sheath - minimum)	-	1000	-
15.1 a) i)(Annealing Test ( For copper wire ) )	-	1000	-
15.1 a) ii)(Tensile test (for aluminium) - Before stranding )	-	1000	-
15.1 a) ii)(Tensile test (for aluminium) - After stranding )	-	1200	-
15.1 a) iii)(Wrapping test (for aluminium))	-	1000	-
15.1 a) iv)(Resistance test - Main conductor)	-	1000	-
15.1 a) iv)(Resistance test - Neutral conductor)	-	1000	-
15.1 d) i) (Phyaical tests for insulation : Tensile Test)	-	1000	-
15.1 d) i) (Phyaical tests for insulation : Elongation)	-	1000	-
15.1 d) ii) (Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	1000	-
15.1 d) ii) (Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-	1000	-
15.1 d) iii) (Phyaical tests for insulation : Hot set )	-	800	-
15.1 d) iii) (Phyaical tests for insulation : Permanent set )	-	800	-
15.1 d) iv) (Phyaical tests for insulation : Shrinkage )	-	800	-
15.1 d) iv) (Phyaical tests for insulation : Shrinkage - Crack observed )	-	800	-
15.1 d) v) (Insulation: Waterabsorption(gravimetric))	-	800	-
15.1 e) i) (Physical tests for outer sheath : Tensile stregth)	-	1000	-
15.1 e) i) (Physical tests for outer sheath : Elongation)	-	1000	-
15.1 e) ii) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-	1200	-
15.1 e) ii) (Physical tests for outer sheath -Ageing in air oven : Elongation )	-	1200	-
15.1 e) ii) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-	1200	-
15.1 e) ii) (Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-	1200	-
15.1 e) iii) (Sheath: Loss of mass in air oven)	-	800	-
15.1 e) iv) (Phyaical tests for Sheath : Shrinkage )	-	100	-
15.1 e) iv) (Phyaical tests for Sheath : Shrinkage - Crack observed )	-	1000	-
15.1 e) v) (Sheath : Hot deformation)	-	1100	-
15.1 e) vi) (Sheath : Heat shock test)	-	800	-
15.1 e) vii) (Sheath : Thermalstability)	-	800	-
15.1 f)(INSULATION RESISTANCE TEST : Volume resistivity )	-	800	-
16.2(HIGH VOLTAGE TEST )	-	1500	-
16.3(FLAMMABILITY TEST : Period of Burning )	-	1600	-
16.3(FLAMMABILITY TEST : Unaffected length )	-	1600	-
16.9(Oxygen Index Test)	-	1100	-
16.1(Flame Retardance Test on Single Cables)	-	1250	-
16.11(Flame Retardance Test on Bunched Cables)	-	1250	-
16.13(Test for Halogen Acid Gas Evolution)	-	1100	-
16.14(Temperature Index)	-	1100	-
17.1(Manufacturer'. identification)	-	0	-
17.2(cable Indentification )	-	0	-
17.3(cable Code )	-	0	-

19 Mar, 2029

-
-

190

IS 8783 : Part 4 : Sec 3 (1995)

Winding wires for submersible motors - Specification: Part 4 specification for individual wires: Sec 3 polyester and polypropylene insulated winding wires (First Revision)

Winding Wires for Submersible Motors

9500 View breakup
(5% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(The winding wire shall either be wound on spools / reels conforming to IS 482-1981. or supplied in a coils packed and labelled.)	-	200	-
6.1(The winding wire shall carry following information marked on the lable on spool / reel / coil;)	-	200	-
6.1(a) Reference to this Indian Standard;)	-	200	-
6.1(b) Manufacturer's name,brand name or trade-mark;)	-	200	-
6.1(c) Size of conductor / maximum overall diameter,)	-	200	-
6.1(e) Number of lengths onspool / reel / coil (if more than one);)	-	200	-
6.1(f) Country of Manufacturer)	-	200	-
6.1(g) Year of Manufacture.)	-	200	-
4(i) Material)	-	750	-
5(ii) Diameter [mm] Seperate wire:)	-	750	-
5(ii) Diameter [mm] Wire taken from cable:)	-	750	-
5(iii) Annealing test [Percentage] on Seperate wire:)	-	750	-
5(iii) Annealing test [Percentage] on Wire taken from cable:)	-	750	-
5(d) Resistance test [Ohm/km corrected to 20°c)	-	750	-
4.1, table 1 & 2(a) Thickness of Polyster (mm))	-	750	-
4.1, table 1 & 3(b) Thickness of Polypropylene (mm))	-	750	-
4.1, table 1 & 4(c) Total thickness of Insulation(mm))	-	750	-
4.2(Application of insulation)	-	750	-
4.3(Colour of Insuation)	-	750	-
4.4(Overall diameter (mm))	-	750	-
4(Before ageing Tensile strength [N/mm²])	-	750	-
4(Before ageing Elongation at break [Percentage])	-	750	-
4(After ageing Tensile strength [N/mm²])	-	750	-
4(Variation on tensile strangth [Percentage])	-	750	-
4(After ageing Elongation at break [Percentage])	-	750	-
4(Variation on elongation at break [Percentage])	-	750	-
4(Shrinkage test [Percentage])	-	750	-
4(After Shrinkage Cracks found.)	-	750	-
4.5(High Voltage test [Water Immersion test] 3 KV for 1 Minute)	-	750	-
4.1(Insulation Resistance test [ohm-cm] At 27 ºC)	-	750	-
4.1([Insulation Resistance test [ohm-cm] At 90 ºC)	-	750	-
5(The winding wire shall either be wound on spools / reels conforming to IS 482-1981. or supplied in a coils packed and labelled.)	-	200	-
6(The winding wire shall carry following information marked on the lable on spool / reel / coil;)	-	200	-
6(a) Reference to this Indian Standard;)	-	200	-
6(b) Manufacturer's name,brand name or trade-mark;)	-	200	-
6(c) Size of conductor / maximum overall diameter,)	-	200	-
6(d) Length of conductor on spool / reel /coil;)	-	200	-
6(e) Number of lengths onspool / reel / coil (if more than one);)	-	200	-
6(f) Country of Manufacturer Marking)	-	200	-
6(g) Year of Manufacture.)	-	200	-
6.2(BIS Certification Mark)	-	200	-
4(i) Material)	-	750	-
4(ii) Diameter [mm] Seperate wire:)	-	750	-
4(ii) Diameter [mm] Wire taken from cable)	-	750	-
4(iii) Annealing test [Percentage] on Seperate wire:)	-	750	-
4([iii) Annealing test [Percentage] on Wire taken from cable:)	-	750	-
4(d) Resistance test [Ohm/km corrected to 20°c])	-	750	-
4(a) Thickness of Polyster (mm))	-	750	-
4(b) Thickness of Polypropylene (mm))	-	750	-
4(c) Total thickness of Insulation(mm))	-	750	-
4(Application of insulation)	-	750	-
4(Colour of Insuation)	-	750	-
4(Overall diameter (mm))	-	750	-
4(Before ageing Tensile strength [N/mm²])	-	750	-
4(Before ageing Elongation at break [Percentage])	-	750	-
4(After ageing Tensile strength [N/mm²])	-	750	-
4(Variation on tensile strangth [Percentage])	-	750	-
4(After ageing Elongation at break [Percentage])	-	750	-
4(Variation on elongation at break [Percentage])	-	750	-
4(Shrinkage test [Percentage])	-	750	-
4(After Shrinkage Cracks found.)	-	750	-
4(Water absorption test [Gravimetric] [mg/cm²])	-	750	-
4(Hot Deformation test [depth of indentation) [Percentage])	-	750	-
4(High Voltage test [Water Immersion test] 3 KV for 1 Minute)	-	750	-
4(Insulation Resistance test [ohm-cm] At 27 ºC)	-	750	-
4(Insulation Resistance test [ohm-cm] At 90 ºC)	-	750	-
5.1(The winding wire shall either be wound on spools / reels conforming to IS 482-1981. or supplied in a coils packed and labelled.)	-	200	5% discount for BIS
6.1(The winding wire shall carry following information marked on the lable on spool / reel / coil;)	-	200	5% discount for BIS
6.1(a) Reference to this Indian Standard;)	-	200	5% discount for BIS
6.1(b) Manufacturer's name,brand name or trade-mark;)	-	200	5% discount for BIS
6.1(c) Size of conductor / maximum overall diameter,)	-	200	5% discount for BIS
6.1(e) Number of lengths onspool / reel / coil (if more than one);)	-	200	5% discount for BIS
6.1(f) Country of Manufacturer)	-	200	5% discount for BIS
6.1(g) Year of Manufacture.)	-	200	5% discount for BIS
4(i) Material)	-	750	5% discount for BIS
5(ii) Diameter [mm] Seperate wire:)	-	750	5% discount for BIS
5(ii) Diameter [mm] Wire taken from cable:)	-	750	5% discount for BIS
5(iii) Annealing test [Percentage] on Seperate wire:)	-	750	5% discount for BIS
5(iii) Annealing test [Percentage] on Wire taken from cable:)	-	750	5% discount for BIS
5(d) Resistance test [Ohm/km corrected to 20°c)	-	750	5% discount for BIS
4.1, table 1 & 2(a) Thickness of Polyster (mm))	-	750	5% discount for BIS
4.1, table 1 & 3(b) Thickness of Polypropylene (mm))	-	750	5% discount for BIS
4.1, table 1 & 4(c) Total thickness of Insulation(mm))	-	750	5% discount for BIS
4.2(Application of insulation)	-	750	5% discount for BIS
4.3(Colour of Insuation)	-	750	5% discount for BIS
4.4(Overall diameter (mm))	-	750	5% discount for BIS
4(Before ageing Tensile strength [N/mm²])	-	750	5% discount for BIS
4(Before ageing Elongation at break [Percentage])	-	750	5% discount for BIS
4(After ageing Tensile strength [N/mm²])	-	750	5% discount for BIS
4(Variation on tensile strangth [Percentage])	-	750	5% discount for BIS
4(After ageing Elongation at break [Percentage])	-	750	5% discount for BIS
4(Variation on elongation at break [Percentage])	-	750	5% discount for BIS
4(Shrinkage test [Percentage])	-	750	5% discount for BIS
4(After Shrinkage Cracks found.)	-	750	5% discount for BIS
4.5(High Voltage test [Water Immersion test] 3 KV for 1 Minute)	-	750	5% discount for BIS
4.1(Insulation Resistance test [ohm-cm] At 27 ºC)	-	750	5% discount for BIS
4.1([Insulation Resistance test [ohm-cm] At 90 ºC)	-	750	5% discount for BIS
5(The winding wire shall either be wound on spools / reels conforming to IS 482-1981. or supplied in a coils packed and labelled.)	-	200	5% discount for BIS
6(The winding wire shall carry following information marked on the lable on spool / reel / coil;)	-	200	5% discount for BIS
6(a) Reference to this Indian Standard;)	-	200	5% discount for BIS
6(b) Manufacturer's name,brand name or trade-mark;)	-	200	5% discount for BIS
6(c) Size of conductor / maximum overall diameter,)	-	200	5% discount for BIS
6(d) Length of conductor on spool / reel /coil;)	-	200	5% discount for BIS
6(e) Number of lengths onspool / reel / coil (if more than one);)	-	200	5% discount for BIS
6(f) Country of Manufacturer Marking)	-	200	5% discount for BIS
6(g) Year of Manufacture.)	-	200	5% discount for BIS
6.2(BIS Certification Mark)	-	200	5% discount for BIS
4(i) Material)	-	750	5% discount for BIS
4(ii) Diameter [mm] Seperate wire:)	-	750	5% discount for BIS
4(ii) Diameter [mm] Wire taken from cable)	-	750	5% discount for BIS
4(iii) Annealing test [Percentage] on Seperate wire:)	-	750	5% discount for BIS
4([iii) Annealing test [Percentage] on Wire taken from cable:)	-	750	5% discount for BIS
4(d) Resistance test [Ohm/km corrected to 20°c])	-	750	5% discount for BIS
4(a) Thickness of Polyster (mm))	-	750	5% discount for BIS
4(b) Thickness of Polypropylene (mm))	-	750	5% discount for BIS
4(c) Total thickness of Insulation(mm))	-	750	5% discount for BIS
4(Application of insulation)	-	750	5% discount for BIS
4(Colour of Insuation)	-	750	5% discount for BIS
4(Overall diameter (mm))	-	750	5% discount for BIS
4(Before ageing Tensile strength [N/mm²])	-	750	5% discount for BIS
4(Before ageing Elongation at break [Percentage])	-	750	5% discount for BIS
4(After ageing Tensile strength [N/mm²])	-	750	5% discount for BIS
4(Variation on tensile strangth [Percentage])	-	750	5% discount for BIS
4(After ageing Elongation at break [Percentage])	-	750	5% discount for BIS
4(Variation on elongation at break [Percentage])	-	750	5% discount for BIS
4(Shrinkage test [Percentage])	-	750	5% discount for BIS
4(After Shrinkage Cracks found.)	-	750	5% discount for BIS
4(Water absorption test [Gravimetric] [mg/cm²])	-	750	5% discount for BIS
4(Hot Deformation test [depth of indentation) [Percentage])	-	750	5% discount for BIS
4(High Voltage test [Water Immersion test] 3 KV for 1 Minute)	-	750	5% discount for BIS
4(Insulation Resistance test [ohm-cm] At 27 ºC)	-	750	5% discount for BIS
4(Insulation Resistance test [ohm-cm] At 90 ºC)	-	750	5% discount for BIS
4.1(Heat Shock Test - No cracks found)	-	600	5% discount for BIS

19 Mar, 2029

-
Included w.e.f 13.05.2020

Bureau of Indian Standards

The National Standards Body of India

Bharat Test House Pvt Ltd 1474 Sonipat Haryana

1474, HSIIDC Rai Industrial Estate, SONIPAT, Sonipat, Haryana, 131029

9310314585 bthrai@bharattesthouse.com

Scope List