BIS - LIMS (Laboratory Information Management System)

Bharat Test House Pvt Ltd 1474 Sonipat Haryana

1474, HSIIDC Rai Industrial Estate, SONIPAT, Sonipat, Haryana, 131029

9310314585 bthrai@bharattesthouse.com

Scope List

Reset

198 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

151

IS 5950 (1984)

Specification for shot firing cables (For Use Other Than In Shafts) (First Revision)

Shot firing cables

9500 View breakup
Included w.e.f 13.05.2020

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Conductor : Material -IS : 8130-2013)	-	0	-
4.1(Insulation : Material -IS : 5831-1984)	-	0	-
5.1(Sheath : materail IS : 5831-1984)	-	0	-
6.1(Conductor : Construction IS : 8130-2013)	-	0	-
7.1(Insulation : Application )	-	0	-
7.2(Thickness of Insulation - average )	-	750	5% discount for BIS
7.2(Thickness of Insulation - Min. )	-	750	5% discount for BIS
7.3(Colour of Insulation)	-	0	-
8.1, 9.1 (c)(Nominal radial thickness of sheath)	-	750	5% discount for BIS
8.2(Thickness of Sheath)	-	750	5% discount for BIS
8.2(Thickness of Sheath - min.)	-	750	5% discount for BIS
8.3(Colour of Sheath)	-	0	-
9.1 a)(Annealing test)	-	600	5% discount for BIS
9.1 b)(Conductor resistance test)	-	750	5% discount for BIS
9.1 d) i)(Insulation : Tensile strength)	-	600	5% discount for BIS
9.1 d) i)(Insulation : elongation at break)	-	600	5% discount for BIS
9.1 d) i)(Sheath : Tensile strength)	-	600	5% discount for BIS
9.1 d) i)(Sheath : elongation at break)	-	600	5% discount for BIS
9.1 d) ii)(Ageing in air oven - Insulation : Tensile strength)	-	650	5% discount for BIS
9.1 d) ii)(Ageing in air oven - Insulation : Tensile strength Variation)	-	650	5% discount for BIS
9.1 d) ii)(Ageing in air oven - Insulation : elongation at break)	-	650	5% discount for BIS
9.1 d) ii)(Ageing in air oven - Insulation : elongation variation at break)	-	650	5% discount for BIS
9.1 d) ii)(Ageing in air oven - Sheath : Tensile strength)	-	650	5% discount for BIS
9.1 d) ii)(Ageing in air oven - Sheath : Tensile strength variation )	-	650	5% discount for BIS
9.1 d) ii)(Ageing in air oven - Sheath : elongation at break)	-	650	5% discount for BIS
9.1 d) ii)(Ageing in air oven - Sheath : elongation variation at break)	-	650	5% discount for BIS
9.1 d) iii )(Loss of mass test - insulation )	-	700	5% discount for BIS
9.1 d) iii )(Loss of mass test - Sheath )	-	700	5% discount for BIS
9.1 d) iv )(Hot deformation - insulation )	-	700	5% discount for BIS
9.1 d) iv )(Hot deformation - sheath )	-	700	5% discount for BIS
9.1 d) v )(Heat shock - insulation )	-	800	5% discount for BIS
9.1 d) v )(Heat shock - Sheath )	-	800	5% discount for BIS
9.1 d) vi )(Shrinkage - insulation )	-	900	5% discount for BIS
9.1 d) vi )(Shrinkage : Crack observed - insulation )	-	900	5% discount for BIS
9.1 d) vi )(Shrinkage - Sheath )	-	900	5% discount for BIS
9.1 d) vi )(Shrinkage: Crack observed - Sheath )	-	900	5% discount for BIS
10.2(Voltage test )	-	750	5% discount for BIS
9.1 f)(Insulation resistance test: Volume resistivity )	-	750	5% discount for BIS
9.1 f)(Insulation resistance test : IR constant)	-	750	5% discount for BIS
10.3(Spark Test)	-	1600	5% discount for BIS
10.4(Flammability Test )	-	1100	5% discount for BIS
11.1(Manufacturer’s Identification)	-	0	-
11.2(Cable Code)	-	0	-
12.1(packing )	-	0	-
12.2(Marking )	-	0	-
12.2.1(Standard marks )	-	0	-

19 Mar, 2029

-
Included w.e.f 13.05.2020

152

IS 9968 : Part 1 (1988)

Specification for elastomer insulatedcables: Part 1 for working voltages up to and including 1100 volts (First Revision)

Elastomer Insulated Cables

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1( Copper Cooduetor)	-	0	-
3.2(Aluminium conductor)	-	0	-
4.1(INSULATION : lnsulation for General Service)	-	0	-
4.2(INSULATION : Heat Resisting insulation)	-	0	-
4.3(INSULATION : Silicone Rubber Insulation)	-	0	-
5.1(TAPE : Proofed Tape)	-	0	-
5.2(TAPE : 2 Polyethyl_ Terephthalate ( PETP ) Tape or Plastic: Tape or Any Other SlIIitable Tape )	-	0	-
5.3(TAPE : Giass Tape)	-	0	-
6.1(FILLERS : )	-	0	-
7.1(BRAID : Textile Braid)	-	0	-
7.2(BRAID : Glass Braid )	-	0	-
8.1(SHEATH : General Service Insulated Cables and Flexible Cords)	-	0	-
8.2(SHEATH :Heat Resisting Insulated Cables)	-	0	-
9.1(PresenRtive Compound)	-	0	-
9.2(Varnish)	-	0	-
10( Conductor )	-	0	-
11(Separator tape)	-	0	-
12.2(Insulation : Thickness of Insufatien)	-	200	5% discount of BIS
12.4(Insulation : Allplication of Insulation)	-	0	-
13(CORE IDENTiFICATlON)	-	0	-
14(Tape)	-	0	-
15(BRAIDING)	-	0	-
16(COMPOUNDING AND VARNISHING)	-	0	-
17(LAYING UP OF CORES)	-	0	-
18( Binder tape)	-	0	-
19.2(Sheath : Thickness of Sheath)	-	200	5% discount of BIS
19.4( Sheath :Colour)	-	0	-
20( Overall diameter)	-	200	5% discount of BIS
21. (a)(Persulphate tests (for copper))	-	500	5% discount of BIS
21. (b)(Annealing Test (for coper))	-	600	5% discount of BIS
21. (c)( Tensile Test (for aluminium))	-	600	5% discount of BIS
21. (d)( Wrapping Test (for aluminium))	-	200	5% discount of BIS
21. (e)(Conductor Resistance )	-	400	5% discount of BIS
21.1( Tensile strength )	-	500	5% discount of BIS
22.1( Elongation)	-	500	5% discount of BIS
21.1(type test : Ageing In air oven)	-	1100	5% discount of BIS
21.1(type test : Ageing in air bomb)	-	1000	5% discount of BIS
21.1(type test : Ageing In oxygen bomb)	-	1000	5% discount of BIS
21.1(type test : Hot set elongation)	-	600	5% discount of BIS
21.1(type test : Tear resistance )	-	1000	5% discount of BIS
22.2(type test :Insulauon resistance High voltage (water immersron ) test)	-	1200	5% discount of BIS
22.2(type test : Flammability test ( applicable to cables finished With SE 3 and SE 4 sheaths only) )	-	1600	5% discount of BIS
21(Water absorption test)	-	600	5% discount of BIS
23(identification)	-	0	-
21.1((f) Oil resistance)	-	1000	5% discount of BIS

19 Mar, 2029

-
-

153

IS 14155 (1994)

Domestic electric clothes washing machines for household use - Specification

Washing Machines

185000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11(Determination of the washing performance standard measurement with a load of clean material and standardized soiling)	-	75000	5% discount for BIS
12(Determination of wear suffered by textile)	-	32500	5% discount for BIS
13(Determination of water retention percentage (Rinsing efficiency))	-	15000	5% discount for BIS
14(Determination of the water extraction efficiency)	-	15000	5% discount for BIS
15(Determination of water and energy consumption)	-	20000	5% discount for BIS
16(Determination of mechanical detergent loss in the sump of washing machine)	-	7000	5% discount for BIS
17(Endurance)	-	20000	5% discount for BIS
18(Finish)	-	500	5% discount for BIS

19 Mar, 2029

-
-

154

IS 14255 (1995)

Aertal bunched cables - For working voltages up to and including 1100 Volts - Specification

Aerial Bunched Cables

11500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Phase/Street Lighting conductor)	-	0	-
4.2(Messenger (Neutral Conductor or Otherwise))	-	0	-
5.1(Insulation)	-	0	-
6.1(Flexibility class)	-	0	-
6.2(Compactness)	-	0	-
6.2(No of strands)	-	0	-
6.2(Surface)	-	0	-
6.3(Protective barrier)	-	0	-
6.4(size of street lighting conductor)	-	0	-
6.5(Size of messenger conductor )	-	0	-
6.6(Joints in messenger conductor )	-	0	-
6.6(Direction of outer layer)	-	0	-
7.1(Insulation)	-	0	-
7.2( Thickness of insulation)	-	0	-
7.3(Tolerance on thickness of insulation )	-	0	-
7.4(Aplication of the insulation )	-	0	-
7.5(Colour of the insulation )	-	0	-
8.1(Core identification)	-	0	-
8.2(Core identification)	-	0	-
8.3(Identification by other means)	-	0	-
9.1(Assembly (Laying up))	-	0	-
9.2(Assembly (Laying up))	-	0	-
9.3(Direction of lay)	-	0	-
10.1 a) i)(Tests on phase/street light conductor: tensile test - Test method IS10810:Part 2)	-	750	5% discount for BIS
10.1 a) ii)(Wrapping test - 10810: Part 3)	-	750	5% discount for BIS
10.1 a) iii)(Resistance test - IS10810: Part 5)	-	750	5% discount for BIS
10.1 b) i)(Test on messenger conductor: Breaking load - IS 10810: Part 2)	-	1200	5% discount for BIS
10.1 b) ii)(Test on messenger conductor: Elongation test - Cl 11.3)	-	1200	5% discount for BIS
10.1 b) iii)(Test on messenger conductor: Resistance test - IS 10810: Part 5)	-	1200	5% discount for BIS
10.1 c) i)(Physical tests for XLPE Insulation: Tensile strength - IS 10810: Part 7)	-	1200	5% discount for BIS
10.1 c) i)(Physical tests for XLPE Insulation: elongation at break - IS 10810: part 7)	-	1200	5% discount for BIS
10.1 c) ii)(Ageing in air oven : Tensile strength variation - IS 10810:Part 11)	-	1250	5% discount for BIS
10.1 c) ii)(Ageing in air oven : Elongation variation- IS 10810: Part 11)	-	1250	5% discount for BIS
10.1 c) iii)(Hot set test: Elongation under load - IS 10810: Part 30)	-	1000	5% discount for BIS
10.1 c) iii)(Hot set test: Permanent elongation (set) after cooling - IS 10810: Part 30)	-	1000	5% discount for BIS
10.1 c) iv)(Shrinkage test : Shrinkage - 10810:Part 12)	-	1100	5% discount for BIS
10.1 c) iv)(Shrinkage test : Crack Observed - 10810:Part 12)	-	1100	5% discount for BIS
10.1 c) v)(Water ahsorption (Gravimetric) - IS 10810: Part 33 )	-	750	5% discount for BIS
10.1 d) i)(Physical test for PE insulation: Tensile strength - IS 10810: Part 7 )	-	1200	5% discount for BIS
10.1 d) i)(Physical test for PE insulation: elongation at break - IS 10810: Part 7)	-	1200	5% discount for BIS
10.1 d) ii)(Melt flow index- IS 10810: Part 23)	-	1200	5% discount for BIS
10.1 d) iv)(Vicat softening point -IS 10810: Part 22)	-	1250	5% discount for BIS
10.1 d) v)(Environmental stress cracking -IS 10810:Part29)	-	1250	5% discount for BIS
10.1 f)(Insulation resistance (Volume resistivity) test a) volume resistivity at 27°C - IS 10810: Part 43)	-	750	5% discount for BIS
10.1 f)(Insulation resistance (Volume resistivity) test b) volume resistivity at 70°C - IS 10810: Part 43)	-	750	5% discount for BIS
10.1 g)(High voltage test - IS10810:Part 45)	-	750	5% discount for BIS
11.4(Bending Test on the Completed Cable ( Optional) )	-	500	5% discount for BIS

19 Mar, 2029

-
-

155

IS 13779 (2020)

ac STATIC WATTHOUR METERS CLASS 1 AND 2-Specefication

AC static watthour meters, Class 1 and 2

120000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1 a)(MARKING OF METERS : Name Plate )	-	500	5% discount for BIS
7.1 b)(MARKING OF METERS : Name Plate )	-	500	5% discount for BIS
7.1 c)(MARKING OF METERS : Name Plate )	-	500	5% discount for BIS
7.1 d)(MARKING OF METERS : Name Plate )	-	500	5% discount for BIS
7.1 e)(MARKING OF METERS : Name Plate )	-	500	5% discount for BIS
7.1 f)(MARKING OF METERS : Name Plate )	-	500	5% discount for BIS
7.1 g)(MARKING OF METERS : Name Plate )	-	500	5% discount for BIS
7.1 h)(MARKING OF METERS : Name Plate )	-	500	5% discount for BIS
7.1 j)(MARKING OF METERS : Name Plate )	-	500	5% discount for BIS
7.1 k)(MARKING OF METERS : Name Plate )	-	500	5% discount for BIS
7.1 m)(MARKING OF METERS : Name Plate )	-	500	5% discount for BIS
7.1 p)(MARKING OF METERS : Name Plate )	-	500	5% discount for BIS
7.1 n)(MARKING OF METERS : Name Plate )	-	500	5% discount for BIS
12.7.6.1( Test of insulation Properties : General test conditions )	-	21000	5% discount for BIS
12.7.6.2(Impulse voltage test)	-	21000	5% discount for BIS
12.7.6.3(ac Voltage test)	-	21000	5% discount for BIS
12.7.6.4(Insulation resistance test)	-	21000	5% discount for BIS
12.10.1 a)(Testof Accuracy Requirements : General Test Conditions )	-	22500	5% discount for BIS
12.10.1 b)(Testof Accuracy Requirements : General Test Conditions )	-	22500	5% discount for BIS
12.10.1 c)(Testof Accuracy Requirements : General Test Conditions )	-	22500	5% discount for BIS
12.10.1 d)(Testof Accuracy Requirements : General Test Conditions )	-	22500	5% discount for BIS
12.10.1 e)(Testof Accuracy Requirements : General Test Conditions )	-	22500	5% discount for BIS
12.10.1 f)(Testof Accuracy Requirements : General Test Conditions )	-	22500	5% discount for BIS
12.16 a)(Limits of Error and Interpretation or Test Results)	-	22500	5% discount for BIS
12.16 b)(Limits of Error and Interpretation or Test Results)	-	22500	5% discount for BIS
12.16 c)(Limits of Error and Interpretation or Test Results)	-	22500	5% discount for BIS
12.15(Test of Meter Constant/Registration)	-	22500	5% discount for BIS
12.14(Test of Starting Conditions)	-	22500	5% discount for BIS
12.13(Test of No-Load Condition)	-	22500	5% discount for BIS
12.12(Test ofAmbient Temperature Influence)	-	22500	5% discount for BIS
12.17(Repeatability of Error Test )	-	22500	5% discount for BIS
12.11(Test of Iniluence Quantities)	-	22500	5% discount for BIS
12.7.1(Test of Power Consumption)	-	21000	5% discount for BIS
12.7.2(Test of Influence of Supply Voltage)	-	21000	5% discount for BIS
12.7.3( Test of Influence of Short-time Overcurrents)	-	21000	5% discount for BIS
12.7.4(Test of Influence of Self-Heating)	-	21000	5% discount for BIS
12.7.5(Test of Influence of Heating)	-	21000	5% discount for BIS
12.8(TestorImmunity to Earth Fault)	-	21000	5% discount for BIS
12.9.2(Test for Immunity to Electrostatic Discharge (ESD))	-	5000	5% discount for BIS
12.9.4(FastTransient BurstTest)	-	7500	5% discount for BIS
12.9.5(Radio Interference Measurement)	-	7500	5% discount for BIS
12.6.1(Dry Heat Test)	-	7500	5% discount for BIS
12.6.2(Cold Test)	-	7500	5% discount for BIS
12.6.3( Damp Heat Cycle Test)	-	7500	5% discount for BIS
12.3.1(Shock Test)	-	10000	5% discount for BIS
12.3.2(Vibration Test)	-	10000	5% discount for BIS
12.3.3( Spring Hammer Test)	-	10000	5% discount for BIS
12.5 a)(Test of Protection Against Penetration of Dust and Water)	-	11000	5% discount for BIS
12.5 b)(Test of Protection Against Penetration of Dust and Water)	-	11000	5% discount for BIS
12.4(Testof Resistance to Heat and Fire )	-	11000	5% discount for BIS
6(General and constructional requirements)	-	11000	5% discount for BIS
6.1(General)	-	0	Qualitative
6.2(Meter case)	-	0	Qualitative
6.3(Window)	-	0	Qualitative
6.4(Terminals, terminal block and protective earth terminal)	-	0	Qualitative
6.5(Terminal Cover(s))	-	0	Qualitative
6.6(Clearance and creepage dis¬t¬ances)	-	500	5% discount for BIS
6.7(Insulating encased meter)	-	0	Qualitative
6.10(Display of measured values)	-	0	Qualitative
6.11(Output device)	-	0	-
7.1.1(BIS Standard Mark)	-	0	Qualitative
7.2(Connection diagrams and terminal marking)	-	0	Qualitative
11.1(Limits of Error and Interpretation or Test Results)	-	0	-
12.9.3(Test for Immunity to EIectromagnetic HF Fields)	-	21000	5% discount for BIS
4(Classification)	-	200	5% discount for BIS
5.1(Standard Reference Voltages)	-	300	5% discount for BIS
5.2(Standard Basic Currents)	-	300	5% discount for BIS
5.3(Rated Maximum Current)	-	300	5% discount for BIS
5.4(Standard Frequency)	-	300	5% discount for BIS
6.1(General)	-	11000	5% discount for BIS
6.2(Meter Case)	-	11000	5% discount for BIS
6.3(Window)	-	11000	5% discount for BIS
6.4(Terminals, terminal block and protective earth terminal)	-	11000	5% discount for BIS
6.5(Terminals covers and Extended Terminal Cover)	-	11000	5% discount for BIS
6.6(Clearance and creepage distances)	-	11000	5% discount for BIS
6.7(Insulating encased meter)	-	11000	5% discount for BIS
6.10(Display of measured values)	-	11000	5% discount for BIS
6.11(Output device)	-	11000	5% discount for BIS
7.1(Name Plate)	-	500	5% discount for BIS
7.2(Connection diagrams and terminal marking)	-	500	5% discount for BIS
8(Climatic Conditions)	-	7500	5% discount for BIS
9.1, 12.7.1(Test of Power Consumption)	-	21000	5% discount for BIS
12.9.2(Test of Immunity to electrostatic discharge)	-	5000	5% discount for BIS
12.9.3(Test of Immunity to electromagnetic HF field)	-	21000	5% discount for BIS
12.9.4(Fast transient burst test)	-	7500	5% discount for BIS
12.9.5, 10.1(Surge Immunity test)	-	6000	5% discount for BIS
12.9.6(Radio Interference Measurement)	-	7500	5% discount for BIS
12.10.1(Test of Accuracy Requirements : General Test Conditions)	-	22500	5% discount for BIS
12.3.1(Shock test)	-	10000	5% discount for BIS
12.3.2(Vibration test)	-	10000	5% discount for BIS
12.3.3(Spring hammer test)	-	10000	5% discount for BIS
12.16 & 11.7(Test of repeatability of error)	-	22500	5% discount for BIS
12.15 & 11.6(Test of meter constant)	-	22500	5% discount for BIS
12.14 & 11.5(Test of starting condition)	-	22500	5% discount for BIS
12.13 & 11.4(Test of no-load condition)	-	22500	5% discount for BIS
12.4(Test of resistance to heat and fire)	-	11000	5% discount for BIS
12.12 & 11.3(Test of ambient temperature influence)	-	22500	5% discount for BIS
12.5(Test of protection against penetration of dust and water)	-	11000	5% discount for BIS
11.2(Test on limits of error due to other influence quantities)	-	22500	5% discount for BIS
12.6.1(Dry heat test)	-	7500	5% discount for BIS
12.6.2(Cold test)	-	7500	5% discount for BIS
12.6.3(Damp heat cyclic test)	-	7500	5% discount for BIS
11.1(Test on limits of error due to variation of current)	-	22500	5% discount for BIS
12.7.2(Test of influence of supply voltage)	-	21000	5% discount for BIS
12.7.2(Voltage interruptions of Vref=100% Interruption time: 1sec Number of interruptions: 3 Restoring time between interruptions: 50msec.)	-	21000	5% discount for BIS
12.7.2(Voltage interruptions of Vref=100% Interruption time: 20msec Number of interruptions: 1)	-	21000	5% discount for BIS
12.7.2(Voltage dip of Vref=50% Dip time: 1 min Number of dips: 1)	-	21000	5% discount for BIS
12.8(Test of immunity to earth/phase fault)	-	21000	5% discount for BIS
12.7.3(Test of influence of short time over currents)	-	21000	5% discount for BIS
12.7.6.4(Insulation resistance test)	-	21000	5% discount for BIS
12.7.4(Test of Influence of self heating)	-	21000	5% discount for BIS
12.7.5(Test of influence of heating)	-	21000	5% discount for BIS
12.7.6.2(Impulse voltage test)	-	21000	5% discount for BIS
12.7.6.2(Impulse voltage tests for circuits and between the circuits)	-	21000	5% discount for BIS
12.7.6.2(Impulse voltage test of electric circuits relative to earth)	-	21000	5% discount for BIS
12.7.6.3(ac high voltage test)	-	21000	5% discount for BIS
12.7.6.4(Insulation resistance test)	-	21000	5% discount for BIS
9.5, 12.7.6.1(Test of insulation Properties : General test conditions)	-	21000	5% discount for BIS

19 Mar, 2029

-
-

156

IS 14697 (2021)

ac STATIC TRANSFORMER OPERATED WATTHOUR METERS CLASS 02 S AND 05 S AND VAR-HOUR METERS CLASS 02 S 05 S AND 10 S - SPECIFICATION First Revision

A.C. Static Transformer Operated Watt hour Meters

122000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1 a)( MARKING OF METERS: Name Plate )	-	500	5% discount for BIS
7.1 b)( MARKING OF METERS: Name Plate )	-	500	5% discount for BIS
7.1 c)( MARKING OF METERS: Name Plate )	-	500	5% discount for BIS
7.1 d)( MARKING OF METERS: Name Plate )	-	500	5% discount for BIS
7.1 e)( MARKING OF METERS: Name Plate )	-	500	5% discount for BIS
7.1 f)( MARKING OF METERS: Name Plate )	-	500	5% discount for BIS
7.1 g)( MARKING OF METERS: Name Plate )	-	500	5% discount for BIS
7.1 h)( MARKING OF METERS: Name Plate )	-	500	5% discount for BIS
7.1 j)( MARKING OF METERS: Name Plate )	-	500	5% discount for BIS
7.1 k)( MARKING OF METERS: Name Plate )	-	500	5% discount for BIS
7.1 n)( MARKING OF METERS: Name Plate )	-	500	5% discount for BIS
7.1 m)( MARKING OF METERS: Name Plate )	-	500	5% discount for BIS
7.1.1(Bis marking)	-	500	5% discount for BIS
7.2(Connection Diagrams and Terminal Marking)	-	500	5% discount for BIS
12.7.6.2(Impulse voltage test )	-	21000	5% discount for BIS
12.7.6.3(ac Voltage test)	-	21000	5% discount for BIS
12.7.6.4(Insulation resistance test)	-	21000	5% discount for BIS
12.9.1 a)( General Test Conditions)	-	0	-
12.9.1 b)( General Test Conditions)	-	0	-
12.9.1 c)( General Test Conditions)	-	0	-
12.9.1 b)( General Test Conditions)	-	0	-
11.1(Limits of Error Due to Variation of the Current)	-	22500	5% discount for BIS
12.15 a)(Limits of error and Interpretation of Test Results )	-	22500	-
12.15 b)(Limits of error and Interpretation of Test Results )	-	22500	-
12.15 c)(Limits of error and Interpretation of Test Results )	-	22500	-
12.14(Test of Meter Constant/ Registration)	-	22500	5% discount for BIS
12.13(Test of Starting Conditions)	-	22500	5% discount for BIS
12.12(Test of No-Load Condition)	-	22500	5% discount for BIS
12.11(Test of Ambient Temperature Influence)	-	22500	5% discount for BIS
12.16(Repeatability of Error Test)	-	22500	5% discount for BIS
12.1(Test of Influence Quantities)	-	22500	5% discount for BIS
12.7.1(Test of Power Consumption )	-	21000	5% discount for BIS
12.7.2(Test of Influence of Supply Voltage)	-	21000	5% discount for BIS
12.7.3(Test of Influence of Short-Time Over Currents)	-	21000	5% discount for BIS
12.7.4(Test of influence of self-heating)	-	21000	5% discount for BIS
12.7.5(Test of Influence of Heating )	-	21000	5% discount for BIS
12.8.2(Test for Immunity to Electrostatic Discharge (ESD))	-	5000	5% discount for BIS
12.8.4(Fast Transient Burst Tes)	-	7500	5% discount for BIS
12.8.5(Radio interference measurement)	-	7500	5% discount for BIS
12.6(Test for Climatic Influences)	-	7500	5% discount for BIS
12.6.1(dry heat test)	-	7500	5% discount for BIS
12.6.2(cold test)	-	7500	5% discount for BIS
12.6.3(Damp Heat Cycle Test )	-	7500	5% discount for BIS
12.3.3(Spring Hammer Test)	-	11000	5% discount for BIS
12.3.1(Shock Test)	-	11000	5% discount for BIS
12.3.2(Vibration Test)	-	11000	5% discount for BIS
12.5 a)(Test of Protection Against Penetration of Dust )	-	11000	5% discount for BIS
12.5 b)( Protection against penetration of water)	-	11000	5% discount for BIS
12.4(Test of Resistance to Heat and Fire)	-	11000	5% discount for BIS
6.11(Output device)	-	0	-
6.10(Display of measured values)	-	0	-
6.7(Insulating encased meter)	-	0	-
6.6(Clearance and creepage distances)	-	500	-
6.5(Terminal Cover(s))	-	0	-
6.3(Window)	-	0	-
6.4(Terminals, terminal block and protective earth terminal)	-	0	-
6.2(Meter case)	-	0	-
6.1(General)	-	0	-
6(General and constructional requirements)	-	0	-
12.17(Test of immunity to earth/phase fault)	-	22500	5% discount for BIS
12.1(Operation of Accessories)	-	0	5% discount for BIS
12.1(Abnormal Magnetic Induction of External Origin 10mT)	-	11000	5% discount for BIS
12.1(Magnetic induction of External Origin 0.5mT)	-	11000	5% discount for BIS
12.1(Continuous Magnetic Induction of External Origin 0.2 Tesla)	-	11000	5% discount for BIS
12.1(Continuous Magnetic Induction of External Origin 67 milli Tesla)	-	11000	5% discount for BIS
12.1(Phase of Auxiliary Voltage)	-	11000	5% discount for BIS
12.1(Auxiliary Voltage)	-	11000	5% discount for BIS
12.1(Voltage Unbalanced)	-	11000	5% discount for BIS
12.1(Reversed Phase Sequence)	-	11000	5% discount for BIS
12.1(Waveform 10% of 3rd Harmonics)	-	11000	5% discount for BIS
12.1(Frequency Variation)	-	11000	5% discount for BIS
12.1(Voltage Variation)	-	11000	5% discount for BIS
7.1(Marking of meters Name plate)	-	500	-
12.8.3(Test for Immunity to Electromagnetic HF Fields )	-	22000	5% discount for BIS
6(General and Constructional requirements)	-	11000	5% discount for BIS
7.1(MARKING OF METERS : Name Plate)	-	500	5% discount for BIS
8(Climatic Conditions)	-	7500	5% discount for BIS
9.1, 12.7.1(Test of Power Consumption)	-	21000	5% discount for BIS
"12.8.2("Test for Immunity to Electrostatic Discharge (ESD) ")	-	5000	5% discount for BIS
"12.8.3(Test for Immunity to Electromagnetic HF Fields)	-	22000	5% discount for BIS
"12.8.4(Fast Transient Burst Test)	-	7500	5% discount for BIS
"12.8.5(Surge Immunity Test)	-	6000	5% discount for BIS
"12.8.6(Radio Interference Measurement)	-	7500	5% discount for BIS
12.9.1(Test of Accuracy Requirements : General Test Conditions)	-	22500	5% discount for BIS
12.3.1(Shock test)	-	11000	5% discount for BIS
12.3.2(Vibration test)	-	11000	5% discount for BIS
12.3.3(Spring Hammer Test)	-	11000	5% discount for BIS
6.1(General)	-	0	-
6.2(Meter Case)	-	0	-
6.3(Window)	-	0	-
12.4(Test of resistance to heat and fire)	-	11000	5% discount for BIS
6.4(Terminals, Terminals Block(s) and Protective Earth Terminal)	-	11000	5% discount for BIS
12.5(Protection against penetration of dust and water)	-	11000	5% discount for BIS
6.5(Terminal Cover(s))	-	0	-
6.6(Clearance and Creepage Distance)	-	500	-
12.6.3(Damp Heat Cycle Test)	-	7500	5% discount for BIS
12.6.2(Cold Test)	-	7500	5% discount for BIS
6.7(Insulating Encased Meter)	-	11000	5% discount for BIS
12.6.1(Dry heat test)	-	7500	5% discount for BIS
6.10(Display of Measured Values)	-	11000	5% discount for BIS
9.6 & 12.17(Immunity to Earth/Phase Fault)	-	22500	5% discount for BIS
6.11(Output Device)	-	11000	5% discount for BIS
9.4 & 12.7.5(Influence of Heating)	-	21000	5% discount for BIS
9.3 & 12.7.4(Influence of Self-heating)	-	21000	5% discount for BIS
9.2.3 & 12.7.3(Short Time Over Current)	-	21000	5% discount for BIS
7.1(Name Plate)	-	500	5% discount for BIS
9.2.2 & 12.7.2(Influence of Supply Voltage)	-	21000	5% discount for BIS
9.1 & 12.7.1(Power Consumption)	-	21000	5% discount for BIS
7.2(Connections, Diagrams and Terminal Marking)	-	500	5% discount for BIS
9.5 & 12.7.6.2(Impulse voltage test)	-	21000	5% discount for BIS
9.5 & 12.7.6.3(a.c. voltage test)	-	21000	5% discount for BIS
12.7.6.4(Insulation resistance test)	-	21000	5% discount for BIS
11.1(Limits of Error Due to Variation of the Current)	-	7500	5% discount for BIS
11.2(Electrical fast transient burst)	-	7500	5% discount for BIS
11.2(‘Abnormal’ ac magnetic induction of external origin 10 mT)	-	7500	5% discount for BIS
11.2(Continuous ‘abnormal’ magnetic induction of external origin)	-	7500	5% discount for BIS
11.2(Electromagnetic HF fields)	-	22000	5% discount for BIS
11.2(Magnetic induction of external origin 0.5 mT)	-	22000	5% discount for BIS
11.2("Phase of Auxiliary supply voltage by 120 degree")	-	7500	5% discount for BIS
11.2(Auxiliary voltage ± 15 percent)	-	7500	5% discount for BIS
11.2(Voltage unbalance)	-	7500	5% discount for BIS
11.2(Reversed phase sequence)	-	7500	5% discount for BIS
11.2(Wave form: 10 percent of third harmonic in the current)	-	7500	5% discount for BIS
11.2(Frequency variation)	-	7500	5% discount for BIS
11.2(Voltage variation)	-	7500	5% discount for BIS
11.3 & 12.11(Limits of Error Due to Ambient Temperature Variation)	-	7500	5% discount for BIS
11.4.1(Initial Start-up of the Meter)	-	7500	5% discount for BIS
11.7 & 12.16(Repeatability of Error Test)	-	7500	5% discount for BIS
11.6 & 12.14(Meter Constant)	-	7500	5% discount for BIS
12.13 & 11.5(Starting Current)	-	7500	5% discount for BIS
11.4.2 & 12.12(Running with No-Load)	-	7500	5% discount for BIS

19 Mar, 2029

-
-

157

IS 2553 : Part 3 (2019)

Safety glass - Specification: Part 3 solar applications

75000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Raw Material)	-	5000	-
4.2 & 6(Dimensions)	-	5000	-
4.2 & 6(Squareness)	-	5000	-
4.2 & 6(Flatness)	-	5000	-
4.2 & 6(Fragmentation)	-	15000	-
4.2 & 6(Resistance to Shock (Ball Drop))	-	24000	-
4.2 & 6(Mechanical Strength)	-	15000	-
4.2 & 6(Hail Strength)	-	25000	-
5.2(Marking)	-	1000	-
4.1(Raw Material)	-	0	-
4.2 & 6(Dimensions)	-	0	-
4.2 & 6(Squareness)	-	0	-
4.2 & 6(Flatness)	-	0	-
4.2 & 6(Fragmentation)	-	0	-
4.2 & 6(Resistance to Shock (Ball Drop))	-	0	-
4.2 & 6(Mechanical Strength)	-	0	-
4.2 & 6(Hail Strength)	-	0	-
5.2(Marking)	-	0	-

19 Mar, 2029

-
-

158

IS 2835 (1987)

Specification for flat transparent sheet glass (Third Revision)

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(CLASSIFICATION)	-	0	-
4.1(Material)	-	750	-
4.1.1(Material)	-	750	-
4.2-Table 1 & Cl 5.1(Thickness )	-	2000	-
4.2-Table 1(Length )	-	2100	-
4.2-Table 1(Width)	-	1800	-
4.3-Table 2-i(Gaseous inclusion)	-	1000	-
4.3-Table 2-ii(Opaque gaseous inclusion)	-	1200	-
4.3-Table 2-iii(Knots, dirts and stones)	-	1200	-
4.3-Table 2-iv & Cl 5.2(Scratches, rubs and crush)	-	1200	-
4.3-Table 2-v & Cl 5.3(Bow)	-	1200	-
4.3-Table 2-vi & Cl 5.4(Reams, Light Strings and lines)	-	1400	-
4.3-Table 2-vii(Waviness)	-	1600	-
4.3-Table 2-viii(Sulphur stains)	-	1800	-
4.3-Table 2-ix(Corner breakage and chip)	-	1600	-
4.3.1-Table 2A-i(Allowable Cluster of Defects for AA Quality at Central area)	-	1800	-
4.3.1-Table 2A-i(Allowable Cluster of Defects for AA Quality at Outer area)	-	1700	-
4.3.1-Table 2A-ii(Allowable Cluster of Defects for A Quality at Central area)	-	1700	-
4.3.1-Table 2A-ii(Allowable Cluster of Defects for A Quality at Outer area)	-	1700	-

19 Mar, 2029

-
-

159

IS 2553 : Part 2 (2019)

Safety glass - Specification: Part 2 for road transport (First Revision)

207000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.1(Light Transmittance)	-	5700	-
5.1.2.1(Resistance to Abrasion)	-	7800	-
5.1.2.3.1(Resistance to Abrasion)	-	1950	-
5.1.2.3.1(Resistance to Abrasion)	-	7800	-
5.1.2.3.2(Resistance to Abrasion)	-	7800	-
5.2.1(Resistance to Temperature Changes)	-	3500	-
5.2.2(a) Resistance to Fire)	-	8000	-
5.2.2(b) Resistance to Fire)	-	8000	-
5.3.1 (Resistance to Radiation)	-	15000	-
5.3.2(Resistance to High Temperature)	-	6500	-
5.3.3.1(Resistance to Humidity)	-	70000	-
5.3.3.2(Resistance to Humidity)	-	70000	-
5.3.3.3(Resistance to Humidity)	-	70000	-
5.4.1(Optical Distortion)	-	6600	-
5.4.2(Secondary image separation test-Vehicle Category M1 and N -Zone A)	-	6100	-
5.4.2(Secondary image separation test-Vehicle Category M1 and N -Zone B)	-	6100	-
5.4.2(Secondary image separation test-Vehicle Category L -Zone Primary area)	-	6100	-
5.4.2(Secondary image separation test-Vehicle Category M2 , M3 and N -central area)	-	6100	-
5.4.2.3(Secondary image separation test)	-	6100	-
5.4.3.1(Head-form Test (Location of crack))	-	11000	-
5.4.3.2(Head-form Test (Interlayer adhesion))	-	11000	-
5.4.3.3.1(Head-form Test)	-	11000	-
5.4.3.3.2(Head-form Test)	-	11000	-
5.4.4(2.260 g Ball)	-	8600	-
5.4.5.1(227 g Ball)	-	8000	-
5.4.5.2(227 g Ball)	-	8000	-
5.4.5.4(227 g Ball)	-	8000	-
5.5.1.1.1(Fragmentation Test)	-	8000	-
5.5.1.1.4(Fragmentation Test)	-	8000	-
5.5.1.1.5(Fragmentation Test)	-	8000	-
5.5.1.1.5.1(Fragmentation Test)	-	8000	-
5.5.1.1.5.2(Fragmentation Test)	-	8000	-
5.5.1.2(227 g ball test)	-	8000	-
5.5.2.1.1(227 g ball test)	-	8000	-
5.5.2.1.2(227 g ball test)	-	8000	-
5.5.2.1.3(227 g ball test)	-	8000	-
5.5.3.1(equirements Applicable only to Double-Glazed Units-Individual components)	-	0	-
5.5.3.2.1( Head-form Test)	-	11000	-
5.5.3.2.2.1( Head-form Test)	-	11000	-
5.5.3.2.2.2( Head-form Test)	-	11000	-
5.5.3.2.2.3( Head-form Test)	-	11000	-
5.5.3.2.3-a( Head-form Test)	-	11000	-
5.5.3.2.3-b-1( Head-form Test)	-	11000	-
5.5.3.2.3-b-3( Head-form Test)	-	11000	-
5.6.1.7( Head-form Test)	-	11000	-
5.6.1.8( Head-form Test-The HIC value )	-	11000	-
5.6.2.4-a(Mechanical Strength Test — 227g Ball)	-	8000	-
5.6.2.4-b(Mechanical Strength Test — 227g Ball)	-	8000	-
5.6.2.5(Mechanical Strength Test — 227g Ball test at –18° ± 2°C)	-	8000	-
5.6.3.3(Flexibility and Fold Test)	-	8000	-
5.6.4.4-a(Weathering)	-	19500	-
5.6.4.4-b(Weathering)	-	19500	-
5.6.5.3-a(Cross-cut)	-	10000	-
5.6.5.3-b-1(Cross-cut)	-	10000	-
5.7.1.1(227 g Ball Test at 20 ± 5°C)	-	8000	-
5.7.2.1(227g Ball Test at –18° ± 2°C)	-	8000	-
5.7.3.1(Flexibility Test and Fold Test)	-	8700	-
5.4.3.1(Head-form Test (Location of crack))	-	11000	-
5.4.3.2(Head-form Test (Interlayer adhesion))	-	11000	-

19 Mar, 2029

-
-

160

IS 2553 : Part 1 (2018)

Safety glass - Specification: Part 1 architectural, building and general uses (Fourth Revision)

148000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Types)	-	5100	-
5.1.1(General)	-	6000	-
5.1.2(Optical Faults-IS 14900)	-	1500	-
5.1.2(Spot Faults of category A/B/C/D -IS 14900)	-	1500	-
5.1.2(Reams, Strings and Lines-IS 14900)	-	1500	-
5.1.2(Linear / Extended Faults -IS 14900)	-	1500	-
5.2.1 (Thickness -IS 17004 & IS 14900)	-	1025	-
5.2.2.1( Dimensions- Width )	-	1000	-
5.2.2.1( Dimensions- Length)	-	1000	-
5.2.2.2( Squareness)	-	1000	-
5.2.3 (Fragmentation Test- IS 17004)	-	10900	-
5.2.4-a( Flatness-Overall bow-IS 17004)	-	1075	-
5.2.4-b( Flatness-Roller wave distortion-IS 17005)	-	1075	-
5.2.4-c( Flatness-Edge lift-IS 17006)	-	1075	-
5.2.4-d( Flatness-Local distortion-IS 17007)	-	1075	-
5.2.4.1 (Other distortions)	-	1000	-
5.2.5.1( Resistance to shock- IS 17004)	-	33200	-
5.2.5.2( Resistance to human impact- IS 17004)	-	18400	-
5.2.6( Surface Compression (Optional)- IS 17004)	-	8100	-
5.2.7( Mechanical Strength — Four Point Bending Test (Optional)- IS 17004)	-	20500	-
5.2.8.1 & 5.2.8.3-Table 7(Diameter of Holes & Deviations on holes )	-	5350	-
5.2.8.3-Table 8(Deviations on position of holes and Cutouts Location)	-	5350	-
5.3.1 (Thickness-IS 17004 & IS 14900)	-	2100	-
5.3.2.1( Dimensions and squareness- Width )	-	1067	-
5.3.2.1( Dimensions and squareness- Length)	-	1067	-
5.3.2.1( Dimensions and squareness-Squareness)	-	1067	-
5.3.2.2 (Edge displacement)	-	2500	-
5.3.3( Light Stability Test-IS 17004)	-	9600	-
5.3.4( Boil and Bake Tests-IS 17004)	-	5700	-
5.3.5( Fracture and Adhesion Test-IS 17004)	-	3500	-
5.3.6.1( Spot defects in the central area)	-	580	-
5.3.6.2 (Linear defects in the central area)	-	580	-
5.3.6.3( Defects in the outer area for framed edges)	-	580	-
5.3.6.4( Vents)	-	580	-
5.3.6.5( Creases and streaks)	-	580	-
5.3.7( Humidity Test – Optional)	-	51400	-
5.3.8( Resistance to Human Impact Test)	-	18400	-
4(Types)	-	0	-
5.1.1(General)	-	0	-
5.1.2(Optical Faults-IS 14900)	-	0	-
5.1.2(Spot Faults of category A/B/C/D -IS 14900)	-	0	-
5.1.2(Reams, Strings and Lines-IS 14900)	-	0	-
5.1.2(Linear / Extended Faults -IS 14900)	-	0	-
5.2.1 (Thickness -IS 17004 & IS 14900)	-	0	-
5.2.2.1( Dimensions- Width )	-	0	-
5.2.2.1( Dimensions- Length)	-	0	-
5.2.2.2( Squareness)	-	0	-
5.2.3 (Fragmentation Test- IS 17004)	-	0	-
5.2.4-a( Flatness-Overall bow-IS 17004)	-	0	-
5.2.4-b( Flatness-Roller wave distortion-IS 17005)	-	0	-
5.2.4-c( Flatness-Edge lift-IS 17006)	-	0	-
5.2.4-d( Flatness-Local distortion-IS 17007)	-	0	-
5.2.4.1 (Other distortions)	-	0	-
5.2.5.1( Resistance to shock- IS 17004)	-	0	-
5.2.5.2( Resistance to human impact- IS 17004)	-	0	-
5.2.6( Surface Compression (Optional)- IS 17004)	-	0	-
5.2.7( Mechanical Strength — Four Point Bending Test (Optional)- IS 17004)	-	0	-
5.2.8.1 & 5.2.8.3-Table 7(Diameter of Holes & Deviations on holes )	-	0	-
5.2.8.3-Table 8(Deviations on position of holes and Cutouts Location)	-	0	-
5.3.1 (Thickness-IS 17004 & IS 14900)	-	0	-
5.3.2.1( Dimensions and squareness- Width )	-	0	-
5.3.2.1( Dimensions and squareness- Length)	-	0	-
5.3.2.1( Dimensions and squareness-Squareness)	-	0	-
5.3.2.2 (Edge displacement)	-	0	-
5.3.3( Light Stability Test-IS 17004)	-	0	-
5.3.4( Boil and Bake Tests-IS 17004)	-	0	-
5.3.5( Fracture and Adhesion Test-IS 17004)	-	0	-
5.3.6.1( Spot defects in the central area)	-	0	-
5.3.6.2 (Linear defects in the central area)	-	0	-
5.3.6.3( Defects in the outer area for framed edges)	-	0	-
5.3.6.4( Vents)	-	0	-
5.3.6.5( Creases and streaks)	-	0	-
5.3.7( Humidity Test – Optional)	-	0	-
5.3.8( Resistance to Human Impact Test)	-	0	-
4(Types)	-	0	-
5.1.1(General)	-	0	-
5.1.2(Optical Faults-IS 14900)	-	0	-
5.1.2(Spot Faults of category A/B/C/D -IS 14900)	-	0	-
5.1.2(Reams, Strings and Lines-IS 14900)	-	0	-
5.1.2(Linear / Extended Faults -IS 14900)	-	0	-
5.2.1 (Thickness -IS 17004 & IS 14900)	-	0	-
5.2.2.1( Dimensions- Width )	-	0	-
5.2.2.1( Dimensions- Length)	-	0	-
5.2.2.2( Squareness)	-	0	-
5.2.3 (Fragmentation Test- IS 17004)	-	0	-
5.2.4-a( Flatness-Overall bow-IS 17004)	-	0	-
5.2.4-b( Flatness-Roller wave distortion-IS 17005)	-	0	-
5.2.4-c( Flatness-Edge lift-IS 17006)	-	0	-
5.2.4-d( Flatness-Local distortion-IS 17007)	-	0	-
5.2.4.1 (Other distortions)	-	0	-
5.2.5.1( Resistance to shock- IS 17004)	-	0	-
5.2.5.2( Resistance to human impact- IS 17004)	-	0	-
5.2.6( Surface Compression (Optional)- IS 17004)	-	0	-
5.2.7( Mechanical Strength — Four Point Bending Test (Optional)- IS 17004)	-	0	-
5.2.8.1 & 5.2.8.3-Table 7(Diameter of Holes & Deviations on holes )	-	0	-
5.2.8.3-Table 8(Deviations on position of holes and Cutouts Location)	-	0	-
5.3.1 (Thickness-IS 17004 & IS 14900)	-	0	-
5.3.2.1( Dimensions and squareness- Width )	-	0	-
5.3.2.1( Dimensions and squareness- Length)	-	0	-
5.3.2.1( Dimensions and squareness-Squareness)	-	0	-
5.3.2.2 (Edge displacement)	-	0	-
5.3.3( Light Stability Test-IS 17004)	-	0	-
5.3.4( Boil and Bake Tests-IS 17004)	-	0	-
5.3.5( Fracture and Adhesion Test-IS 17004)	-	0	-
5.3.6.1( Spot defects in the central area)	-	0	-
5.3.6.2 (Linear defects in the central area)	-	0	-
5.3.6.3( Defects in the outer area for framed edges)	-	0	-
5.3.6.4( Vents)	-	0	-
5.3.6.5( Creases and streaks)	-	0	-
5.3.7( Humidity Test – Optional)	-	0	-
5.3.8( Resistance to Human Impact Test)	-	0	-
4(Types)	-	0	-
5.1.1(General)	-	0	-
5.1.2(Optical Faults-IS 14900)	-	0	-
5.1.2(Spot Faults of category A/B/C/D -IS 14900)	-	0	-
5.1.2(Reams, Strings and Lines-IS 14900)	-	0	-
5.1.2(Linear / Extended Faults -IS 14900)	-	0	-
5.2.1 (Thickness -IS 17004 & IS 14900)	-	0	-
5.2.2.1( Dimensions- Width )	-	0	-
5.2.2.1( Dimensions- Length)	-	0	-
5.2.2.2( Squareness)	-	0	-
5.2.3 (Fragmentation Test- IS 17004)	-	0	-
5.2.4-a( Flatness-Overall bow-IS 17004)	-	0	-
5.2.4-b( Flatness-Roller wave distortion-IS 17005)	-	0	-
5.2.4-c( Flatness-Edge lift-IS 17006)	-	0	-
5.2.4-d( Flatness-Local distortion-IS 17007)	-	0	-
5.2.4.1 (Other distortions)	-	0	-
5.2.5.1( Resistance to shock- IS 17004)	-	0	-
5.2.5.2( Resistance to human impact- IS 17004)	-	0	-
5.2.6( Surface Compression (Optional)- IS 17004)	-	0	-
5.2.7( Mechanical Strength — Four Point Bending Test (Optional)- IS 17004)	-	0	-
5.2.8.1 & 5.2.8.3-Table 7(Diameter of Holes & Deviations on holes )	-	0	-
5.2.8.3-Table 8(Deviations on position of holes and Cutouts Location)	-	0	-
5.3.1 (Thickness-IS 17004 & IS 14900)	-	0	-
5.3.2.1( Dimensions and squareness- Width )	-	0	-
5.3.2.1( Dimensions and squareness- Length)	-	0	-
5.3.2.1( Dimensions and squareness-Squareness)	-	0	-
5.3.2.2 (Edge displacement)	-	0	-
5.3.3( Light Stability Test-IS 17004)	-	0	-
5.3.4( Boil and Bake Tests-IS 17004)	-	0	-
5.3.5( Fracture and Adhesion Test-IS 17004)	-	0	-
5.3.6.1( Spot defects in the central area)	-	0	-
5.3.6.2 (Linear defects in the central area)	-	0	-
5.3.6.3( Defects in the outer area for framed edges)	-	0	-
5.3.6.4( Vents)	-	0	-
5.3.6.5( Creases and streaks)	-	0	-
5.3.7( Humidity Test – Optional)	-	0	-
5.3.8( Resistance to Human Impact Test)	-	0	-
4(Types)	-	0	-
5.1.1(General)	-	0	-
5.1.2(Optical Faults-IS 14900)	-	0	-
5.1.2(Spot Faults of category A/B/C/D -IS 14900)	-	0	-
5.1.2(Reams, Strings and Lines-IS 14900)	-	0	-
5.1.2(Linear / Extended Faults -IS 14900)	-	0	-
5.2.1 (Thickness -IS 17004 & IS 14900)	-	0	-
5.2.2.1( Dimensions- Width )	-	0	-
5.2.2.1( Dimensions- Length)	-	0	-
5.2.2.2( Squareness)	-	0	-
5.2.3 (Fragmentation Test- IS 17004)	-	0	-
5.2.4-a( Flatness-Overall bow-IS 17004)	-	0	-
5.2.4-b( Flatness-Roller wave distortion-IS 17005)	-	0	-
5.2.4-c( Flatness-Edge lift-IS 17006)	-	0	-
5.2.4-d( Flatness-Local distortion-IS 17007)	-	0	-
5.2.4.1 (Other distortions)	-	0	-
5.2.5.1( Resistance to shock- IS 17004)	-	0	-
5.2.5.2( Resistance to human impact- IS 17004)	-	0	-
5.2.6( Surface Compression (Optional)- IS 17004)	-	0	-
5.2.7( Mechanical Strength — Four Point Bending Test (Optional)- IS 17004)	-	0	-
5.2.8.1 & 5.2.8.3-Table 7(Diameter of Holes & Deviations on holes )	-	0	-
5.2.8.3-Table 8(Deviations on position of holes and Cutouts Location)	-	0	-
5.3.1 (Thickness-IS 17004 & IS 14900)	-	0	-
5.3.2.1( Dimensions and squareness- Width )	-	0	-
5.3.2.1( Dimensions and squareness- Length)	-	0	-
5.3.2.1( Dimensions and squareness-Squareness)	-	0	-
5.3.2.2 (Edge displacement)	-	0	-
5.3.3( Light Stability Test-IS 17004)	-	0	-
5.3.4( Boil and Bake Tests-IS 17004)	-	0	-
5.3.5( Fracture and Adhesion Test-IS 17004)	-	0	-
5.3.6.1( Spot defects in the central area)	-	0	-
5.3.6.2 (Linear defects in the central area)	-	0	-
5.3.6.3( Defects in the outer area for framed edges)	-	0	-
5.3.6.4( Vents)	-	0	-
5.3.6.5( Creases and streaks)	-	0	-
5.3.7( Humidity Test – Optional)	-	0	-
5.3.8( Resistance to Human Impact Test)	-	0	-
4(Types)	-	0	-
5.1.1(General)	-	0	-
5.1.2(Optical Faults-IS 14900)	-	0	-
5.1.2(Spot Faults of category A/B/C/D -IS 14900)	-	0	-
5.1.2(Reams, Strings and Lines-IS 14900)	-	0	-
5.1.2(Linear / Extended Faults -IS 14900)	-	0	-
5.2.1 (Thickness -IS 17004 & IS 14900)	-	0	-
5.2.2.1( Dimensions- Width )	-	0	-
5.2.2.1( Dimensions- Length)	-	0	-
5.2.2.2( Squareness)	-	0	-
5.2.3 (Fragmentation Test- IS 17004)	-	0	-
5.2.4-a( Flatness-Overall bow-IS 17004)	-	0	-
5.2.4-b( Flatness-Roller wave distortion-IS 17005)	-	0	-
5.2.4-c( Flatness-Edge lift-IS 17006)	-	0	-
5.2.4-d( Flatness-Local distortion-IS 17007)	-	0	-
5.2.4.1 (Other distortions)	-	0	-
5.2.5.1( Resistance to shock- IS 17004)	-	0	-
5.2.5.2( Resistance to human impact- IS 17004)	-	0	-
5.2.6( Surface Compression (Optional)- IS 17004)	-	0	-
5.2.7( Mechanical Strength — Four Point Bending Test (Optional)- IS 17004)	-	0	-
5.2.8.1 & 5.2.8.3-Table 7(Diameter of Holes & Deviations on holes )	-	0	-
5.2.8.3-Table 8(Deviations on position of holes and Cutouts Location)	-	0	-
5.3.1 (Thickness-IS 17004 & IS 14900)	-	0	-
5.3.2.1( Dimensions and squareness- Width )	-	0	-
5.3.2.1( Dimensions and squareness- Length)	-	0	-
5.3.2.1( Dimensions and squareness-Squareness)	-	0	-
5.3.2.2 (Edge displacement)	-	0	-
5.3.3( Light Stability Test-IS 17004)	-	0	-
5.3.4( Boil and Bake Tests-IS 17004)	-	0	-
5.3.5( Fracture and Adhesion Test-IS 17004)	-	0	-
5.3.6.1( Spot defects in the central area)	-	0	-
5.3.6.2 (Linear defects in the central area)	-	0	-
5.3.6.3( Defects in the outer area for framed edges)	-	0	-
5.3.6.4( Vents)	-	0	-
5.3.6.5( Creases and streaks)	-	0	-
5.3.7( Humidity Test – Optional)	-	0	-
5.3.8( Resistance to Human Impact Test)	-	0	-

19 Mar, 2029

-
-

161

IS/IEC 61727 (2004)

Photovoltaic PV Systems ” Characteristics of the Utility Interface

70000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Utility compatibility)	-	35000	5% discount for BIS
5(Personnel safety and equipment protection)	-	35000	5% discount for BIS
4(Utility compatibility)	-	-	-
5(Personnel safety and equipment protection)	-	-	-

19 Mar, 2029

-
-

162

IS/IEC 61683 (1999)

Photovoltaic systems - Power conditioners - Procedure for measuring efficiency

116000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Efficiency measurement conditions)	-	29000	5% discount for BIS
5(Efficiency calculations)	-	29000	5% discount for BIS
6(Efficiency test circuits)	-	29000	5% discount for BIS
7(Loss measurement)	-	29000	5% discount for BIS

19 Mar, 2029

-
-

163

IS 16170 : Part 1 (2014)

Photovoltaic (PV) module performance testing and energy rating: Part 1 irradiance and temperature performance measurements and power rating

Photovoltaic (PV) Module

708000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8(Irradiance and Temperature Measurements and power rating)	-	600000	5% discount for BIS
8(Irradiance and Temperature Measurements and power rating)	-	0	-
9(Rating of power)	-	108000	5% discount for BIS

19 Mar, 2029

-
-

164

IS 302 : Part 2 : Sec 24 (1994)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 24 refrigerators, food - Freezers and ice - Makers

Refrigerators, Food-Freezers and Ice-Makers

175000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1 , 7.12, 7.14,7.15(Marking)	-	250	5% Discount to BIS
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	5000	5% discount for BIS
8.1.2(Protection against access to live parts)	-	0	-
8.1.3(Protection against access to live parts)	-	0	-
8.1.4(Protection against access to live parts)	-	0	-
8.1.5(Protection against access to live parts)	-	0	-
9.1(Startability Test)	-	5000	5% discount for BIS
9.2(Startability Test)	-	0	-
10.1,10.2 10.101,10.102( Input and Current)	-	5000	5% discount for BIS
11(TEMPERATURE RISE)	-	7500	5% discount for BIS
11.2(TEMPERATURE RISE)	-	0	-
11.4(TEMPERATURE RISE)	-	0	-
11.5(TEMPERATURE RISE)	-	0	-
11.6(TEMPERATURE RISE)	-	0	-
11.7(TEMPERATURE RISE)	-	0	-
11.8(TEMPERATURE RISE)	-	0	-
11.1(TEMPERATURE RISE)	-	0	-
11.101(TEMPERATURE RISE)	-	0	-
11.102(TEMPERATURE RISE)	-	0	-
11.103(TEMPERATURE RISE)	-	0	-
12,12.1,12.2 & 12.3(Heating)	-	5000	5% discount for BIS
13(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	5000	5% discount for BIS
14( RADIO AND TELEVISION INTERFERENCE SUPPRESSION )	-	5000	5% discount for BIS
15(Moisture resistance)	-	10000	5% discount for BIS
15.2(Moisture resistance)	-	0	-
15.3(Moisture resistance)	-	0	-
15.4(Moisture resistance)	-	0	-
15.101(Moisture resistance)	-	0	-
15.102(Moisture resistance)	-	0	-
15.103(Moisture resistance)	-	0	-
16 & 16.1(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	5000	5% discount for BIS
16.2(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	0	-
16.3 & table(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	0	-
16.4(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	0	-
17(Over load Protection )	-	10000	5% discount for BIS
19(ABNORMAL OPERATION)	-	12500	5% discount for BIS
20.1(Stability and mechanical hazards)	-	10000	5% discount for BIS
20.2(Stability and mechanical hazards)	-	0	-
21.1(MECHANICAL STRENGTH)	-	32500	5% discount for BIS
21.2(MECHANICAL STRENGTH)	-	0	-
22.1(Constructions)	-	2500	5% discount for BIS
22.2(Constructions)	-	0	-
22.3(Constructions)	-	0	-
22.4(Constructions)	-	0	-
22.5(Constructions)	-	0	-
22.6(Constructions)	-	0	-
22.7 to 22.10(Constructions)	-	0	-
22.11(Constructions)	-	0	-
22.12(Constructions)	-	0	-
22.13 to 22.33(Constructions)	-	0	-
22.101 to 22.103(Constructions)	-	0	-
23.1 & 23.2(Internal wiring)	-	2500	5% discount for BIS
23.3(Internal wiring)	-	0	-
23.4(Internal wiring)	-	0	-
23.5 to 23.8(Internal wiring)	-	0	-
24.1(Components)	-	250	5% discount for BIS
24.2 ,24.3,24.5 & 24.6(Components)	-	0	-
25.1(Supply connection and external flexible cords)	-	2500	5% discount for BIS
25.2(Supply connection and external flexible cords)	-	0	-
25.3(Supply connection and external flexible cords)	-	0	-
25.4(Supply connection and external flexible cords)	-	0	-
25.6(Supply connection and external flexible cords)	-	0	-
25.7 to 25.13(Supply connection and external flexible cords)	-	0	-
26.1 to 26.8(Terminals for external conductors)	-	4500	5% discount for BIS
26.9(Terminals for external conductors)	-	0	-
26.10 & 26.13(Terminals for external conductors)	-	0	-
27.1 to 27.4(Provision for earthing)	-	5000	5% discount for BIS
27.5(Provision for earthing)	-	0	-
28.1, Table No.-14(Screws and connections)	-	5000	5% discount for BIS
28.2 to 28.4(Screws and connections)	-	0	-
29.1 and table 2(creepage and Clearances distances )	-	5000	5% discount for BIS
29.2 & 29.3(Clearances, creepage distances )	-	0	-
30.1(Resistance to heat and fire)	-	10000	5% discount for BIS
30.2(Resistance to heat and fire)	-	0	-
30.3(Resistance to heat and fire)	-	0	-
31(Resistance to rusting)	-	10000	5% discount for BIS
32(Radiation, toxicity and similar hazards)	-	10000	5% discount for BIS
7.1 , 7.12, 7.14,7.15(Marking)	-	0	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	0	-
8.1.2(Protection against access to live parts)	-	0	-
8.1.3(Protection against access to live parts)	-	0	-
8.1.4(Protection against access to live parts)	-	0	-
8.1.5(Protection against access to live parts)	-	0	-
9.1(Startability Test)	-	0	-
9.2(Startability Test)	-	0	-
10.1,10.2 10.101,10.102( Input and Current)	-	0	-
11(TEMPERATURE RISE)	-	0	-
11.2(TEMPERATURE RISE)	-	0	-
11.4(TEMPERATURE RISE)	-	0	-
11.5(TEMPERATURE RISE)	-	0	-
11.6(TEMPERATURE RISE)	-	0	-
11.7(TEMPERATURE RISE)	-	0	-
11.8(TEMPERATURE RISE)	-	0	-
11.1(TEMPERATURE RISE)	-	0	-
11.101(TEMPERATURE RISE)	-	0	-
11.102(TEMPERATURE RISE)	-	0	-
11.103(TEMPERATURE RISE)	-	0	-
12,12.1,12.2 & 12.3(Heating)	-	0	-
13(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	0	-
14( RADIO AND TELEVISION INTERFERENCE SUPPRESSION )	-	0	-
15(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.3(Moisture resistance)	-	0	-
15.4(Moisture resistance)	-	0	-
15.101(Moisture resistance)	-	0	-
15.102(Moisture resistance)	-	0	-
15.103(Moisture resistance)	-	0	-
16 & 16.1(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	0	-
16.2(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	0	-
16.3 & table(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	0	-
16.4(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	0	-
17(Over load Protection )	-	0	-
19(ABNORMAL OPERATION)	-	0	-
20.1(Stability and mechanical hazards)	-	0	-
20.2(Stability and mechanical hazards)	-	0	-
21.1(MECHANICAL STRENGTH)	-	0	-
21.2(MECHANICAL STRENGTH)	-	0	-
22.1(Constructions)	-	0	-
22.2(Constructions)	-	0	-
22.3(Constructions)	-	0	-
22.4(Constructions)	-	0	-
22.5(Constructions)	-	0	-
22.6(Constructions)	-	0	-
22.7 to 22.10(Constructions)	-	0	-
22.11(Constructions)	-	0	-
22.12(Constructions)	-	0	-
22.13 to 22.33(Constructions)	-	0	-
22.101 to 22.103(Constructions)	-	0	-
23.1 & 23.2(Internal wiring)	-	0	-
23.3(Internal wiring)	-	0	-
23.4(Internal wiring)	-	0	-
23.5 to 23.8(Internal wiring)	-	0	-
24.1(Components)	-	0	-
24.2 ,24.3,24.5 & 24.6(Components)	-	0	-
25.1(Supply connection and external flexible cords)	-	0	-
25.2(Supply connection and external flexible cords)	-	0	-
25.3(Supply connection and external flexible cords)	-	0	-
25.4(Supply connection and external flexible cords)	-	0	-
25.6(Supply connection and external flexible cords)	-	0	-
25.7 to 25.13(Supply connection and external flexible cords)	-	0	-
26.1 to 26.8(Terminals for external conductors)	-	0	-
26.9(Terminals for external conductors)	-	0	-
26.10 & 26.13(Terminals for external conductors)	-	0	-
27.1 to 27.4(Provision for earthing)	-	0	-
27.5(Provision for earthing)	-	0	-
28.1, Table No.-14(Screws and connections)	-	0	-
28.2 to 28.4(Screws and connections)	-	0	-
29.1 and table 2(creepage and Clearances distances )	-	0	-
29.2 & 29.3(Clearances, creepage distances )	-	0	-
30.1(Resistance to heat and fire)	-	0	-
30.2(Resistance to heat and fire)	-	0	-
30.3(Resistance to heat and fire)	-	0	-
31(Resistance to rusting)	-	0	-
32(Radiation, toxicity and similar hazards)	-	0	-
7.1 , 7.12, 7.14,7.15(Marking)	-	0	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	0	-
8.1.2(Protection against access to live parts)	-	0	-
8.1.3(Protection against access to live parts)	-	0	-
8.1.4(Protection against access to live parts)	-	0	-
8.1.5(Protection against access to live parts)	-	0	-
9.1(Startability Test)	-	0	-
9.2(Startability Test)	-	0	-
10.1,10.2 10.101,10.102( Input and Current)	-	0	-
11(TEMPERATURE RISE)	-	0	-
11.2(TEMPERATURE RISE)	-	0	-
11.4(TEMPERATURE RISE)	-	0	-
11.5(TEMPERATURE RISE)	-	0	-
11.6(TEMPERATURE RISE)	-	0	-
11.7(TEMPERATURE RISE)	-	0	-
11.8(TEMPERATURE RISE)	-	0	-
11.1(TEMPERATURE RISE)	-	0	-
11.101(TEMPERATURE RISE)	-	0	-
11.102(TEMPERATURE RISE)	-	0	-
11.103(TEMPERATURE RISE)	-	0	-
12,12.1,12.2 & 12.3(Heating)	-	0	-
13(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	0	-
14( RADIO AND TELEVISION INTERFERENCE SUPPRESSION )	-	0	-
15(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.3(Moisture resistance)	-	0	-
15.4(Moisture resistance)	-	0	-
15.101(Moisture resistance)	-	0	-
15.102(Moisture resistance)	-	0	-
15.103(Moisture resistance)	-	0	-
16 & 16.1(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	0	-
16.2(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	0	-
16.3 & table(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	0	-
16.4(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	0	-
17(Over load Protection )	-	0	-
19(ABNORMAL OPERATION)	-	0	-
20.1(Stability and mechanical hazards)	-	0	-
20.2(Stability and mechanical hazards)	-	0	-
21.1(MECHANICAL STRENGTH)	-	0	-
21.2(MECHANICAL STRENGTH)	-	0	-
22.1(Constructions)	-	0	-
22.2(Constructions)	-	0	-
22.3(Constructions)	-	0	-
22.4(Constructions)	-	0	-
22.5(Constructions)	-	0	-
22.6(Constructions)	-	0	-
22.7 to 22.10(Constructions)	-	0	-
22.11(Constructions)	-	0	-
22.12(Constructions)	-	0	-
22.13 to 22.33(Constructions)	-	0	-
22.101 to 22.103(Constructions)	-	0	-
23.1 & 23.2(Internal wiring)	-	0	-
23.3(Internal wiring)	-	0	-
23.4(Internal wiring)	-	0	-
23.5 to 23.8(Internal wiring)	-	0	-
24.1(Components)	-	0	-
24.2 ,24.3,24.5 & 24.6(Components)	-	0	-
25.1(Supply connection and external flexible cords)	-	0	-
25.2(Supply connection and external flexible cords)	-	0	-
25.3(Supply connection and external flexible cords)	-	0	-
25.4(Supply connection and external flexible cords)	-	0	-
25.6(Supply connection and external flexible cords)	-	0	-
25.7 to 25.13(Supply connection and external flexible cords)	-	0	-
26.1 to 26.8(Terminals for external conductors)	-	0	-
26.9(Terminals for external conductors)	-	0	-
26.10 & 26.13(Terminals for external conductors)	-	0	-
27.1 to 27.4(Provision for earthing)	-	0	-
27.5(Provision for earthing)	-	0	-
28.1, Table No.-14(Screws and connections)	-	0	-
28.2 to 28.4(Screws and connections)	-	0	-
29.1 and table 2(creepage and Clearances distances )	-	0	-
29.2 & 29.3(Clearances, creepage distances )	-	0	-
30.1(Resistance to heat and fire)	-	0	-
30.2(Resistance to heat and fire)	-	0	-
30.3(Resistance to heat and fire)	-	0	-
31(Resistance to rusting)	-	0	-
32(Radiation, toxicity and similar hazards)	-	0	-
30.1(Resistance to heat and fire)	-	0	-
25.4(Supply connection and external flexible cords)	-	0	-
19.103(ABNORMAL OPERATION)	-	0	-
19.102(ABNORMAL OPERATION)	-	0	-
19.101(ABNORMAL OPERATION)	-	0	-
19.11(ABNORMAL OPERATION)	-	0	-
19.9(ABNORMAL OPERATION)	-	0	-
19.7(ABNORMAL OPERATION)	-	0	-
9(Starting of motor operated Appliances)	-	0	-
32(Radiation, toxicity and similar hazards)	-	0	-
31(Resistance to rusting)	-	0	-
30.3(Resistance to heat and fire)	-	0	-
30.2(Resistance to heat and fire)	-	0	-
30.1(Resistance to heat and fire)	-	0	-
30.1(Resistance to heat and fire)	-	0	-
29.2 & 29.3(Clearances, creepage distances )	-	0	-
29.1 and table 2(creepage and Clearances distances )	-	0	-
28.2 to 28.4(Screws and connections)	-	0	-
28.1, Table No.-14(Screws and connections)	-	0	-
27.5(Provision for earthing)	-	0	-
27.1 to 27.4(Provision for earthing)	-	0	-
26.10 & 26.13(Terminals for external conductors)	-	0	-
26.9(Terminals for external conductors)	-	0	-
26.1 to 26.8(Terminals for external conductors)	-	0	-
25.7 to 25.13(Supply connection and external flexible cords)	-	0	-
25.6(Supply connection and external flexible cords)	-	0	-
25.4(Supply connection and external flexible cords)	-	0	-
25.4(Supply connection and external flexible cords)	-	0	-
25.3(Supply connection and external flexible cords)	-	0	-
25.2(Supply connection and external flexible cords)	-	0	-
25.1(Supply connection and external flexible cords)	-	0	-
24.2 ,24.3,24.5 & 24.6(Components)	-	0	-
24.1(Components)	-	0	-
23.5 to 23.8(Internal wiring)	-	0	-
23.4(Internal wiring)	-	0	-
23.3(Internal wiring)	-	0	-
23.1 & 23.2(Internal wiring)	-	0	-
22.101 to 22.103(Constructions)	-	0	-
22.13 to 22.33(Constructions)	-	0	-
22.12(Constructions)	-	0	-
22.11(Constructions)	-	0	-
22.7 to 22.10(Constructions)	-	0	-
22.6(Constructions)	-	0	-
22.5(Constructions)	-	0	-
22.4(Constructions)	-	0	-
22.3(Constructions)	-	0	-
22.2(Constructions)	-	0	-
22.1(Constructions)	-	0	-
21.2(MECHANICAL STRENGTH)	-	0	-
21.1(MECHANICAL STRENGTH)	-	0	-
20.2(Stability and mechanical hazards)	-	0	-
20.1(Stability and mechanical hazards)	-	0	-
19.103(ABNORMAL OPERATION)	-	0	-
19.102(ABNORMAL OPERATION)	-	0	-
19.101(ABNORMAL OPERATION)	-	0	-
19.11(ABNORMAL OPERATION)	-	0	-
19.9(ABNORMAL OPERATION)	-	0	-
19.7(ABNORMAL OPERATION)	-	0	-
19(ABNORMAL OPERATION)	-	0	-
17(Over load Protection )	-	0	-
16.4(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	0	-
16.3 & table(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	0	-
16.2(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	0	-
16 & 16.1(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	0	-
15.103(Moisture resistance)	-	0	-
15.102(Moisture resistance)	-	0	-
15.101(Moisture resistance)	-	0	-
15.4(Moisture resistance)	-	0	-
15.3(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15(Moisture resistance)	-	0	-
14( RADIO AND TELEVISION INTERFERENCE SUPPRESSION )	-	0	-
13(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	0	-
12,12.1,12.2 & 12.3(Heating)	-	0	-
11.103(TEMPERATURE RISE)	-	0	-
11.102(TEMPERATURE RISE)	-	0	-
11.101(TEMPERATURE RISE)	-	0	-
11.1(TEMPERATURE RISE)	-	0	-
11.8(TEMPERATURE RISE)	-	0	-
11.7(TEMPERATURE RISE)	-	0	-
11.6(TEMPERATURE RISE)	-	0	-
11.5(TEMPERATURE RISE)	-	0	-
11.4(TEMPERATURE RISE)	-	0	-
11.2(TEMPERATURE RISE)	-	0	-
11(TEMPERATURE RISE)	-	0	-
10.1,10.2 10.101,10.102( Input and Current)	-	0	-
9.2(Startability Test)	-	0	-
9.1(Startability Test)	-	0	-
9(Starting of motor operated Appliances)	-	0	-
8.1.5(Protection against access to live parts)	-	0	-
8.1.4(Protection against access to live parts)	-	0	-
8.1.3(Protection against access to live parts)	-	0	-
8.1.2(Protection against access to live parts)	-	0	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	0	-
7.1 , 7.12, 7.14,7.15(Marking)	-	0	-
19.11.4.1(Electrostatic discharges)	-	12500	-
19.11.4.2(Radiated fields)	-	12500	-
19.11.4.3(Fast transient bursts)	-	12500	-
19.11.4.4(Surge immunity test)	-	12500	-
19.11.4.5(Immunity to conducted discharges)	-	12500	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	12500	-
19.11.4.7(Harmonics)	-	12500	-
6(Classifications)	-	0	-
6(Classifications)	-	0	-
7.1 , 7.12, 7.14,7.15(Marking)	-	0	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	0	-
8.1.2(Protection against access to live parts)	-	0	-
8.1.3(Protection against access to live parts)	-	0	-
8.1.4(Protection against access to live parts)	-	0	-
8.1.5(Protection against access to live parts)	-	0	-
9.1(Startability Test)	-	0	-
9.2(Startability Test)	-	0	-
10.1,10.2 10.101,10.102( Input and Current)	-	0	-
11(TEMPERATURE RISE)	-	0	-
11.2(TEMPERATURE RISE)	-	0	-
11.4(TEMPERATURE RISE)	-	0	-
11.5(TEMPERATURE RISE)	-	0	-
11.6(TEMPERATURE RISE)	-	0	-
11.7(TEMPERATURE RISE)	-	0	-
11.8(TEMPERATURE RISE)	-	0	-
11.1(TEMPERATURE RISE)	-	0	-
11.101(TEMPERATURE RISE)	-	0	-
11.102(TEMPERATURE RISE)	-	0	-
11.103(TEMPERATURE RISE)	-	0	-
12,12.1,12.2 & 12.3(Heating)	-	0	-
13(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	0	-
14( RADIO AND TELEVISION INTERFERENCE SUPPRESSION )	-	0	-
15(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.3(Moisture resistance)	-	0	-
15.4(Moisture resistance)	-	0	-
15.101(Moisture resistance)	-	0	-
15.102(Moisture resistance)	-	0	-
15.103(Moisture resistance)	-	0	-
16 & 16.1(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	0	-
16.2(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	0	-
16.3 & table(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	0	-
16.4(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	0	-
17(Over load Protection )	-	0	-
19(ABNORMAL OPERATION)	-	0	-
20.1(Stability and mechanical hazards)	-	0	-
20.2(Stability and mechanical hazards)	-	0	-
21.1(MECHANICAL STRENGTH)	-	0	-
21.2(MECHANICAL STRENGTH)	-	0	-
22.1(Constructions)	-	0	-
22.2(Constructions)	-	0	-
22.3(Constructions)	-	0	-
22.4(Constructions)	-	0	-
22.5(Constructions)	-	0	-
22.6(Constructions)	-	0	-
22.7 to 22.10(Constructions)	-	0	-
22.11(Constructions)	-	0	-
22.12(Constructions)	-	0	-
22.13 to 22.33(Constructions)	-	0	-
22.101 to 22.103(Constructions)	-	0	-
23.1 & 23.2(Internal wiring)	-	0	-
23.3(Internal wiring)	-	0	-
23.4(Internal wiring)	-	0	-
23.5 to 23.8(Internal wiring)	-	0	-
24.1(Components)	-	0	-
24.2 ,24.3,24.5 & 24.6(Components)	-	0	-
25.1(Supply connection and external flexible cords)	-	0	-
25.2(Supply connection and external flexible cords)	-	0	-
25.3(Supply connection and external flexible cords)	-	0	-
25.4(Supply connection and external flexible cords)	-	0	-
25.6(Supply connection and external flexible cords)	-	0	-
25.7 to 25.13(Supply connection and external flexible cords)	-	0	-
26.1 to 26.8(Terminals for external conductors)	-	0	-
26.9(Terminals for external conductors)	-	0	-
26.10 & 26.13(Terminals for external conductors)	-	0	-
27.1 to 27.4(Provision for earthing)	-	0	-
27.5(Provision for earthing)	-	0	-
28.1, Table No.-14(Screws and connections)	-	0	-
28.2 to 28.4(Screws and connections)	-	0	-
29.1 and table 2(creepage and Clearances distances )	-	0	-
29.2 & 29.3(Clearances, creepage distances )	-	0	-
30.1(Resistance to heat and fire)	-	0	-
30.2(Resistance to heat and fire)	-	0	-
30.3(Resistance to heat and fire)	-	0	-
31(Resistance to rusting)	-	0	-
32(Radiation, toxicity and similar hazards)	-	0	-
30.1(Resistance to heat and fire)	-	0	-
25.4(Supply connection and external flexible cords)	-	0	-
19.103(ABNORMAL OPERATION)	-	0	-
19.102(ABNORMAL OPERATION)	-	0	-
19.101(ABNORMAL OPERATION)	-	0	-
19.11(ABNORMAL OPERATION)	-	0	-
19.9(ABNORMAL OPERATION)	-	0	-
19.7(ABNORMAL OPERATION)	-	0	-
9(Starting of motor operated Appliances)	-	0	-
32(Radiation, toxicity and similar hazards)	-	0	-
31(Resistance to rusting)	-	0	-
30.3(Resistance to heat and fire)	-	0	-
30.2(Resistance to heat and fire)	-	0	-
30.1(Resistance to heat and fire)	-	0	-
30.1(Resistance to heat and fire)	-	0	-
29.2 & 29.3(Clearances, creepage distances )	-	0	-
29.1 and table 2(creepage and Clearances distances )	-	0	-
28.2 to 28.4(Screws and connections)	-	0	-
28.1, Table No.-14(Screws and connections)	-	0	-
27.5(Provision for earthing)	-	0	-
27.1 to 27.4(Provision for earthing)	-	0	-
26.10 & 26.13(Terminals for external conductors)	-	0	-
26.9(Terminals for external conductors)	-	0	-
26.1 to 26.8(Terminals for external conductors)	-	0	-
25.7 to 25.13(Supply connection and external flexible cords)	-	0	-
25.6(Supply connection and external flexible cords)	-	0	-
25.4(Supply connection and external flexible cords)	-	0	-
25.4(Supply connection and external flexible cords)	-	0	-
25.3(Supply connection and external flexible cords)	-	0	-
25.2(Supply connection and external flexible cords)	-	0	-
25.1(Supply connection and external flexible cords)	-	0	-
24.2 ,24.3,24.5 & 24.6(Components)	-	0	-
24.1(Components)	-	0	-
23.5 to 23.8(Internal wiring)	-	0	-
23.4(Internal wiring)	-	0	-
23.3(Internal wiring)	-	0	-
23.1 & 23.2(Internal wiring)	-	0	-
22.101 to 22.103(Constructions)	-	0	-
22.13 to 22.33(Constructions)	-	0	-
22.12(Constructions)	-	0	-
22.11(Constructions)	-	0	-
22.7 to 22.10(Constructions)	-	0	-
22.6(Constructions)	-	0	-
22.5(Constructions)	-	0	-
22.4(Constructions)	-	0	-
22.3(Constructions)	-	0	-
22.2(Constructions)	-	0	-
22.1(Constructions)	-	0	-
21.2(MECHANICAL STRENGTH)	-	0	-
21.1(MECHANICAL STRENGTH)	-	0	-
20.2(Stability and mechanical hazards)	-	0	-
20.1(Stability and mechanical hazards)	-	0	-
19.103(ABNORMAL OPERATION)	-	0	-
19.102(ABNORMAL OPERATION)	-	0	-
19.101(ABNORMAL OPERATION)	-	0	-
19.11(ABNORMAL OPERATION)	-	0	-
19.9(ABNORMAL OPERATION)	-	0	-
19.7(ABNORMAL OPERATION)	-	0	-
19(ABNORMAL OPERATION)	-	0	-
17(Over load Protection )	-	0	-
16.4(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	0	-
16.3 & table(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	0	-
16.2(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	0	-
16 & 16.1(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	0	-
15.103(Moisture resistance)	-	0	-
15.102(Moisture resistance)	-	0	-
15.101(Moisture resistance)	-	0	-
15.4(Moisture resistance)	-	0	-
15.3(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15(Moisture resistance)	-	0	-
14( RADIO AND TELEVISION INTERFERENCE SUPPRESSION )	-	0	-
13(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	0	-
12,12.1,12.2 & 12.3(Heating)	-	0	-
11.103(TEMPERATURE RISE)	-	0	-
11.102(TEMPERATURE RISE)	-	0	-
11.101(TEMPERATURE RISE)	-	0	-
11.1(TEMPERATURE RISE)	-	0	-
11.8(TEMPERATURE RISE)	-	0	-
11.7(TEMPERATURE RISE)	-	0	-
11.6(TEMPERATURE RISE)	-	0	-
11.5(TEMPERATURE RISE)	-	0	-
11.4(TEMPERATURE RISE)	-	0	-
11.2(TEMPERATURE RISE)	-	0	-
11(TEMPERATURE RISE)	-	0	-
10.1,10.2 10.101,10.102( Input and Current)	-	0	-
9.2(Startability Test)	-	0	-
9.1(Startability Test)	-	0	-
9(Starting of motor operated Appliances)	-	0	-
8.1.5(Protection against access to live parts)	-	0	-
8.1.4(Protection against access to live parts)	-	0	-
8.1.3(Protection against access to live parts)	-	0	-
8.1.2(Protection against access to live parts)	-	0	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	0	-
7.1 , 7.12, 7.14,7.15(Marking)	-	0	-
6(Classifications)	-	0	-
6(Classifications)	-	0	-

19 Mar, 2029

-
Exclusion: 19.11.4.1 (Electrostatic discharges) 19.11.4.2 (Radiated fields) 19.11.4.3 (Fast transient bursts) 19.11.4.4 (Surge immunity test) 19.11.4.5 (Immunity to conducted discharges) 19.11.4.6 (Class 3 Voltage dips and interruptions) 19.11.4.7 (Harmonics)

165

IS 9857 (1990)

Welding cables - Specification (First Revision)

Welding cables

4800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.1 a) 1)(Annealing test - IS 10810: Part 1)	-	200	-
10.1 a) 2)(Conductor resistance tes - IS 10810 : Part 5)	-	300	-
Table 1 (Thickness of covering)	-	200	-
10.1 c) 1)(Physical tests for covering : Tensile strength )	-	200	-
10.1 c) 1)(Physical tests for covering : Elongation at break )	-	200	-
10.1 c) 2)(Physical tests for covering - Ageing in Air oven : Tensile strength variation)	-	200	-
10.1 c) 2)(Physical tests for covering -Ageing in Air oven : Elongation variation at break )	-	200	-
10.1 c) 3)(Physical tests for covering - Ageing in Air Bomb : Tensile strength variation )	-	200	-
10.1 c) 3)(Physical tests for covering -Ageing in Air Bomb : Elongation variation at break )	-	200	-
10.1 c) 4)(Physical tests for covering - Oil Resistance : Tensile strength variation )	-	200	-
10.1 c) 4)(Physical tests for covering - Oil Resistance : Elongation variation at break )	-	200	-
10.1 c) 5)(Hot set test )	-	500	-
10.1 c) 5)(Permanent set )	-	500	-
11.1(High Voltage Test ( Water Immersion Test ))	-	250	-
11.3(Static Flexibility Test)	-	300	-
11.4(Flammability Test)	-	900	-
10.1 a) 1)(Annealing test - IS 10810: Part 1)	-	0	-
10.1 a) 2)(Conductor resistance tes - IS 10810 : Part 5)	-	0	-
Table 1 (Thickness of covering)	-	0	-
10.1 c) 1)(Physical tests for covering : Tensile strength )	-	0	-
10.1 c) 1)(Physical tests for covering : Elongation at break )	-	0	-
10.1 c) 2)(Physical tests for covering - Ageing in Air oven : Tensile strength variation)	-	0	-
10.1 c) 2)(Physical tests for covering -Ageing in Air oven : Elongation variation at break )	-	0	-
10.1 c) 3)(Physical tests for covering - Ageing in Air Bomb : Tensile strength variation )	-	0	-
10.1 c) 3)(Physical tests for covering -Ageing in Air Bomb : Elongation variation at break )	-	0	-
10.1 c) 4)(Physical tests for covering - Oil Resistance : Tensile strength variation )	-	0	-
10.1 c) 4)(Physical tests for covering - Oil Resistance : Elongation variation at break )	-	0	-
10.1 c) 5)(Hot set test )	-	0	-
10.1 c) 5)(Permanent set )	-	0	-
11.1(High Voltage Test ( Water Immersion Test ))	-	0	-
11.3(Static Flexibility Test)	-	0	-
11.4(Flammability Test)	-	0	-
10.1 a) 1)(Annealing test - IS 10810: Part 1)	-	0	-
10.1 a) 2)(Conductor resistance tes - IS 10810 : Part 5)	-	0	-
Table 1 (Thickness of covering)	-	0	-
10.1 c) 1)(Physical tests for covering : Tensile strength )	-	0	-
10.1 c) 1)(Physical tests for covering : Elongation at break )	-	0	-
10.1 c) 2)(Physical tests for covering - Ageing in Air oven : Tensile strength variation)	-	0	-
10.1 c) 2)(Physical tests for covering -Ageing in Air oven : Elongation variation at break )	-	0	-
10.1 c) 3)(Physical tests for covering - Ageing in Air Bomb : Tensile strength variation )	-	0	-
10.1 c) 3)(Physical tests for covering -Ageing in Air Bomb : Elongation variation at break )	-	0	-
10.1 c) 4)(Physical tests for covering - Oil Resistance : Tensile strength variation )	-	0	-
10.1 c) 4)(Physical tests for covering - Oil Resistance : Elongation variation at break )	-	0	-
10.1 c) 5)(Hot set test )	-	0	-
10.1 c) 5)(Permanent set )	-	0	-
11.1(High Voltage Test ( Water Immersion Test ))	-	250	-
11.3(Static Flexibility Test)	-	250	-
11.4(Flammability Test)	-	800	-
4(Conductor : Material )	-	100	-
5(SEPARATOR)	-	100	-
6(COVERING)	-	100	-
7(CONDUCTOR : CONSTRUCTION )	-	100	-
8(S E P A R A T O R)	-	100	-
9.1(C O V E R I N G : Application )	-	100	-
9.2(T h i c k n e s s o f C o v e r i n g)	-	100	-
9.3(T o l e r a n c e on Thickness o f C o v e r i n g)	-	100	-
9.4(A p p l i c a t i o n of C o v e r i n g)	-	100	-
9.5(Colour of C o v e r i n g)	-	100	-
15.1 (d)(Heat Shock Test)	-	750	-
15.1 (d)(Hot Deformation Test)	-	1000	-
15.1 (d)(Loss Of Mass Test)	-	250	-
10.1(b), Table 1(Thickness of covering)	-	200	-
12.1(Manufacturer's Identification)	-	100	-
12.2(Cable Identification)	-	100	-
12.3(Cable Code)	-	100	-
13.1(Packing )	-	100	-
13.2(Marking)	-	100	-
14(CABLE RATINGS)	-	100	-
15(VOLTAGE DROP)	-	100	-
Table 4(Copper purity test)	-	500	-
Table 2(Oil resistance - Elongation)	-	500	-
Table 2(Oil resistance - Tensile strength )	-	500	-
Table 2(Ageing in air bomb - Elongation)	-	600	-
Table 2(Ageing in air bomb - Tensile strength )	-	600	-
10.1 c) 2)(Physical tests for covering -Ageing in Air oven : Elongation at break )	-	500	-
10.1 c) 2)(Physical tests for covering - Ageing in Air oven : Tensile strength )	-	500	-
11.2(Spark Test)	-	1000	-

19 Mar, 2029

-
-

166

IS 9537 : Part 1 (1980)

Specification for conduits for electrical installations: Part 1 general requirements

Conduits for electrical installations

7200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Marking)	-	250	5% Discount to BIS
7(Dimensions)	-	250	5% Discount to BIS
8(Constrution)	-	250	5% Discount to BIS
9 & 9.2("Mechanical properties Bending test ")	-	750	5% Discount to BIS
9.3(Compression test)	-	750	5% Discount to BIS
9.4(Impact test)	-	750	5% Discount to BIS
9.5(Collapse test)	-	750	5% Discount to BIS
10(Resistance to heat)	-	1000	5% Discount to BIS
11(Resistance to burning)	-	1200	5% Discount to BIS
12(Electrical strength test & Insulation resistance test)	-	1250	5% Discount to BIS
13(Eternal influences)	-	1000	5% Discount to BIS
6(Marking)	-	0	-
7(Dimensions)	-	0	-
8(Constrution)	-	0	-
9 & 9.2("Mechanical properties Bending test ")	-	0	-
9.3(Compression test)	-	0	-
9.4(Impact test)	-	0	-
9.5(Collapse test)	-	0	-
10(Resistance to heat)	-	0	-
11(Resistance to burning)	-	0	-
12(Electrical strength test & Insulation resistance test)	-	0	-
13(Eternal influences)	-	0	-

19 Mar, 2029

-
-

167

IS 9537 : Part 3 (1983)

Specification for conduits for electrical installations: Part 3 rigid plain conduits of insulating meterials

Conduits for electrical installations

3200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.2(Minimum inside diameter of conduit)	-	200	5% Discount to BIS
7.3(Length of conduit)	-	200	5% Discount to BIS
9.2(Bending Test i) At Room Temp ii) At Low Temp (-5 ±2°C))	-	400	5% Discount to BIS
9.3(Compression Test as per caluse 9.3 of IS: 9537 (Part 1)-1980)	-	400	5% Discount to BIS
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	300	5% Discount to BIS
9.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	400	5% Discount to BIS
10.0(Resistance to Heat -Ball presure test)	-	500	5% Discount to BIS
11(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	500	5% Discount to BIS
12(Electrical Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-	500	5% Discount to BIS
7.2(Minimum inside diameter of conduit)	-	0	-
7.3(Length of conduit)	-	0	-
9.2(Bending Test i) At Room Temp ii) At Low Temp (-5 ±2°C))	-	0	-
9.3(Compression Test as per caluse 9.3 of IS: 9537 (Part 1)-1980)	-	0	-
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	0	-
9.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	0	-
10.0(Resistance to Heat -Ball presure test)	-	0	-
11(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	0	-
12(Electrical Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-	0	-
13(Tests for external influence as per clause 13 of IS: 9537 (Part 1)-1980)	-	0	-

19 Mar, 2029

-
-

168

IS/IEC 60335 : Part 2 : Sec 89 (2010)

Household and similar electrical appliances - Safety: Part 2 - 89: particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant unit or compressor

Commercial Refrigerating Appliances

113000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1 , 7.12, 7.14,7.15(Marking)	-	500	5% discount for BIS
8, 8.1(Protection against access to live parts)	-	2000	5% discount for BIS
8.1.1 to 8.1.5(Protection against access to live parts)	-	0	-
8.2(Protection against access to live parts)	-	0	-
10.1(Power input and current)	-	5000	5% discount for BIS
10.101 (Power input and current)	-	0	-
11(TEMPERATURE RISE)	-	2000	5% discount for BIS
11.2(TEMPERATURE RISE)	-	0	-
11.4(TEMPERATURE RISE)	-	0	-
11.5(TEMPERATURE RISE)	-	0	-
11.6(TEMPERATURE RISE)	-	0	-
11.7(TEMPERATURE RISE)	-	0	-
11.8(TEMPERATURE RISE)	-	0	-
11.101(TEMPERATURE RISE)	-	0	-
11.102(TEMPERATURE RISE)	-	0	-
11.103(TEMPERATURE RISE)	-	0	-
13(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	3500	5% discount for BIS
13.2(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	0	-
13.3 & table 4,5(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	0	-
14(Transient Over Voltage & table 6)	-	5000	5% discount for BIS
15(Moisture resistance)	-	17500	5% discount for BIS
15.1.1(Moisture resistance)	-	0	-
15.1.2(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.3(Moisture resistance)	-	0	-
15.101(Moisture resistance)	-	0	-
15.102(Moisture resistance)	-	0	-
15.103(Moisture resistance)	-	0	-
16 & 16.1(Leakage current and electric strength)	-	3500	5% discount for BIS
16.2(Leakage current and electric strength)	-	0	-
16.3 & table 7(Leakage current and electric strength)	-	0	-
17(Overload protection of transformers and associated circuits)	-	1500	5% discount for BIS
19(ABNORMAL OPERATION)	-	20000	5% discount for BIS
19.2(ABNORMAL OPERATION)	-	0	-
19.3(ABNORMAL OPERATION)	-	0	-
19.4(ABNORMAL OPERATION)	-	0	-
19.5(ABNORMAL OPERATION)	-	0	-
19.6(ABNORMAL OPERATION)	-	0	-
19.7 & table 8(ABNORMAL OPERATION)	-	0	-
19.8(ABNORMAL OPERATION)	-	0	-
19.9(ABNORMAL OPERATION)	-	0	-
19.1(ABNORMAL OPERATION)	-	0	-
19.11(ABNORMAL OPERATION)	-	0	-
19.11.1(ABNORMAL OPERATION)	-	0	-
19.11.2(ABNORMAL OPERATION)	-	0	-
19.11.3(ABNORMAL OPERATION)	-	0	-
19.11.4(ABNORMAL OPERATION)	-	0	-
19.11.4.1(ABNORMAL OPERATION)	-	0	-
19.12(ABNORMAL OPERATION)	-	0	-
19.13(ABNORMAL OPERATION)	-	0	-
19.14(ABNORMAL OPERATION)	-	0	-
19.15(ABNORMAL OPERATION)	-	0	-
20.1(Stability and mechanical hazards)	-	22500	5% discount for BIS
20.2(Stability and mechanical hazards)	-	0	-
21.1(MECHANICAL STRENGTH)	-	5000	5% discount for BIS
21.2(MECHANICAL STRENGTH)	-	0	-
22.101(MECHANICAL STRENGTH)	-	5000	5% discount for BIS
22.102(MECHANICAL STRENGTH)	-	0	-
22.1(Constructions)	-	0	-
22.2(Constructions)	-	0	-
22.3(Constructions)	-	0	-
22.4(Constructions)	-	0	-
22.5(Constructions)	-	0	-
22.6(Constructions)	-	0	-
22.7 to 22.10(Constructions)	-	0	-
22.11(Constructions)	-	0	-
22.12(Constructions)	-	0	-
22.13 to 22.52(Constructions)	-	0	-
22.101 to 22.102(Constructions)	-	0	-
22.103(Constructions)	-	0	-
22.104(Constructions)	-	0	-
22.105 to 22.114(Constructions)	-	0	-
23.1 & 23.2(Internal wiring)	-	2000	5% discount for BIS
23.3(Internal wiring)	-	0	-
23.4(Internal wiring)	-	0	-
23.5 to 23.8(Internal wiring)	-	0	-
23.9 ,23.10(Internal wiring)	-	0	-
24(Components)	-	2000	5% discount for BIS
24.2 to 24.5 (Components)	-	0	-
25.1(Supply connection and external flexible cords)	-	2000	5% discount for BIS
25.2 to 25.25(Supply connection and external flexible cords)	-	0	-
26, 26.1 to 26.11(Terminals for external conductors)	-	1000	5% discount for BIS
27, 27.1 to 27.6(Provision for earthing)	-	1000	5% discount for BIS
28.1, Table No.-14(Screws and connections)	-	1000	5% discount for BIS
28.2 to 28.4(Screws and connections)	-	0	-
29 and table (creepage and Clearances distances )	-	1000	5% discount for BIS
29.1 & 29.3(creepage and Clearances distances )	-	0	-
30.1(Resistance to heat and fire)	-	4000	5% discount for BIS
30.2(Resistance to heat and fire)	-	0	-
30.2.1(Resistance to heat and fire)	-	0	-
30.2.2(Resistance to heat and fire)	-	0	-
30.2.3(Resistance to heat and fire)	-	0	-
31(Resistance to rusting)	-	3000	5% discount for BIS
V"Cl.32 of IEC 60335-2-89:2010 Cl. 32 of IEC 60335-1-2016 "(60335-2-89)	-	3000	5% discount for BIS
7.1 , 7.12, 7.14,7.15(Marking)	-	0	-
8, 8.1(Protection against access to live parts)	-	0	-
8.1.1 to 8.1.5(Protection against access to live parts)	-	0	-
8.2(Protection against access to live parts)	-	0	-
10.1(Power input and current)	-	0	-
10.101 (Power input and current)	-	0	-
11(TEMPERATURE RISE)	-	0	-
11.2(TEMPERATURE RISE)	-	0	-
11.4(TEMPERATURE RISE)	-	0	-
11.5(TEMPERATURE RISE)	-	0	-
11.6(TEMPERATURE RISE)	-	0	-
11.7(TEMPERATURE RISE)	-	0	-
11.8(TEMPERATURE RISE)	-	0	-
11.101(TEMPERATURE RISE)	-	0	-
11.102(TEMPERATURE RISE)	-	0	-
11.103(TEMPERATURE RISE)	-	0	-
13(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	0	-
13.2(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	0	-
13.3 & table 4,5(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	0	-
14(Transient Over Voltage & table 6)	-	0	-
15(Moisture resistance)	-	0	-
15.1.1(Moisture resistance)	-	0	-
15.1.2(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.3(Moisture resistance)	-	0	-
15.101(Moisture resistance)	-	0	-
15.102(Moisture resistance)	-	0	-
15.103(Moisture resistance)	-	0	-
16 & 16.1(Leakage current and electric strength)	-	0	-
16.2(Leakage current and electric strength)	-	0	-
16.3 & table 7(Leakage current and electric strength)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	-
19(ABNORMAL OPERATION)	-	0	-
19.2(ABNORMAL OPERATION)	-	0	-
19.3(ABNORMAL OPERATION)	-	0	-
19.4(ABNORMAL OPERATION)	-	0	-
19.5(ABNORMAL OPERATION)	-	0	-
19.6(ABNORMAL OPERATION)	-	0	-
19.7 & table 8(ABNORMAL OPERATION)	-	0	-
19.8(ABNORMAL OPERATION)	-	0	-
19.9(ABNORMAL OPERATION)	-	0	-
19.1(ABNORMAL OPERATION)	-	0	-
19.11(ABNORMAL OPERATION)	-	0	-
19.11.1(ABNORMAL OPERATION)	-	0	-
19.11.2(ABNORMAL OPERATION)	-	0	-
19.11.3(ABNORMAL OPERATION)	-	0	-
19.11.4(ABNORMAL OPERATION)	-	0	-
19.11.4.1(ABNORMAL OPERATION)	-	0	-
19.12(ABNORMAL OPERATION)	-	0	-
19.13(ABNORMAL OPERATION)	-	0	-
19.14(ABNORMAL OPERATION)	-	0	-
19.15(ABNORMAL OPERATION)	-	0	-
20.1(Stability and mechanical hazards)	-	0	-
20.2(Stability and mechanical hazards)	-	0	-
21.1(MECHANICAL STRENGTH)	-	0	-
21.2(MECHANICAL STRENGTH)	-	0	-
22.101(MECHANICAL STRENGTH)	-	0	-
22.102(MECHANICAL STRENGTH)	-	0	-
22.1(Constructions)	-	0	-
22.2(Constructions)	-	0	-
22.3(Constructions)	-	0	-
22.4(Constructions)	-	0	-
22.5(Constructions)	-	0	-
22.6(Constructions)	-	0	-
22.7 to 22.10(Constructions)	-	0	-
22.11(Constructions)	-	0	-
22.12(Constructions)	-	0	-
22.13 to 22.52(Constructions)	-	0	-
22.101 to 22.102(Constructions)	-	0	-
22.103(Constructions)	-	0	-
22.104(Constructions)	-	0	-
22.105 to 22.114(Constructions)	-	0	-
23.1 & 23.2(Internal wiring)	-	0	-
23.3(Internal wiring)	-	0	-
23.4(Internal wiring)	-	0	-
23.5 to 23.8(Internal wiring)	-	0	-
23.9 ,23.10(Internal wiring)	-	0	-
24(Components)	-	0	-
24.2 to 24.5 (Components)	-	0	-
25.1(Supply connection and external flexible cords)	-	0	-
25.2 to 25.25(Supply connection and external flexible cords)	-	0	-
26, 26.1 to 26.11(Terminals for external conductors)	-	0	-
27, 27.1 to 27.6(Provision for earthing)	-	0	-
28.1, Table No.-14(Screws and connections)	-	0	-
28.2 to 28.4(Screws and connections)	-	0	-
29 and table (creepage and Clearances distances )	-	0	-
29.1 & 29.3(creepage and Clearances distances )	-	0	-
30.1(Resistance to heat and fire)	-	0	-
30.2(Resistance to heat and fire)	-	0	-
30.2.1(Resistance to heat and fire)	-	0	-
30.2.2(Resistance to heat and fire)	-	0	-
30.2.3(Resistance to heat and fire)	-	0	-
31(Resistance to rusting)	-	0	-
V"Cl.32 of IEC 60335-2-89:2010 Cl. 32 of IEC 60335-1-2016 "(60335-2-89)	-	0	-
"Cl.21.102 "(60335-2-89)	-	0	-
"Cl.24.1 "(60335-2-89)	-	0	-
"Cl.24.7 "(60335-2-89)	-	0	-
"Cl.24.101 "(60335-2-89)	-	0	-
"Cl.28 "(60335-2-89)	-	0	-
22.104(Constructions)	-	0	-
22.104(Constructions)	-	0	-
31(Resistance to rusting)	-	0	-
30.2.3(Resistance to heat and fire)	-	0	-
30.2.2(Resistance to heat and fire)	-	0	-
30.2.1(Resistance to heat and fire)	-	0	-
30.2(Resistance to heat and fire)	-	0	-
30.1(Resistance to heat and fire)	-	0	-
29.1 & 29.3(creepage and Clearances distances )	-	0	-
29 and table (creepage and Clearances distances )	-	0	-
28.2 to 28.4(Screws and connections)	-	0	-
28.1, Table No.-14(Screws and connections)	-	0	-
27, 27.1 to 27.6(Provision for earthing)	-	0	-
26, 26.1 to 26.11(Terminals for external conductors)	-	0	-
25.2 to 25.25(Supply connection and external flexible cords)	-	0	-
25.1(Supply connection and external flexible cords)	-	0	-
24.2 to 24.5 (Components)	-	0	-
24(Components)	-	0	-
23.9 ,23.10(Internal wiring)	-	0	-
23.5 to 23.8(Internal wiring)	-	0	-
23.4(Internal wiring)	-	0	-
23.3(Internal wiring)	-	0	-
23.1 & 23.2(Internal wiring)	-	0	-
22.104(Constructions)	-	0	-
22.105 to 22.114(Constructions)	-	0	-
22.104(Constructions)	-	0	-
22.104(Constructions)	-	0	-
22.103(Constructions)	-	0	-
22.101 to 22.102(Constructions)	-	0	-
22.13 to 22.52(Constructions)	-	0	-
22.12(Constructions)	-	0	-
22.11(Constructions)	-	0	-
22.7 to 22.10(Constructions)	-	0	-
22.6(Constructions)	-	0	-
22.5(Constructions)	-	0	-
22.4(Constructions)	-	0	-
22.3(Constructions)	-	0	-
22.2(Constructions)	-	0	-
22.1(Constructions)	-	0	-
22.102(MECHANICAL STRENGTH)	-	0	-
22.101(MECHANICAL STRENGTH)	-	0	-
21.2(MECHANICAL STRENGTH)	-	0	-
21.1(MECHANICAL STRENGTH)	-	0	-
20.2(Stability and mechanical hazards)	-	0	-
20.1(Stability and mechanical hazards)	-	0	-
19.15(ABNORMAL OPERATION)	-	0	-
19.14(ABNORMAL OPERATION)	-	0	-
19.13(ABNORMAL OPERATION)	-	0	-
19.12(ABNORMAL OPERATION)	-	0	-
19.11.4.1(ABNORMAL OPERATION)	-	0	-
19.11.4(ABNORMAL OPERATION)	-	0	-
19.11.3(ABNORMAL OPERATION)	-	0	-
19.11.2(ABNORMAL OPERATION)	-	0	-
19.11.1(ABNORMAL OPERATION)	-	0	-
19.11(ABNORMAL OPERATION)	-	0	-
19.1(ABNORMAL OPERATION)	-	0	-
19.9(ABNORMAL OPERATION)	-	0	-
19.8(ABNORMAL OPERATION)	-	0	-
19.7 & table 8(ABNORMAL OPERATION)	-	0	-
19.6(ABNORMAL OPERATION)	-	0	-
19.5(ABNORMAL OPERATION)	-	0	-
19.4(ABNORMAL OPERATION)	-	0	-
19.3(ABNORMAL OPERATION)	-	0	-
19.2(ABNORMAL OPERATION)	-	0	-
19(ABNORMAL OPERATION)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	-
16.3 & table 7(Leakage current and electric strength)	-	0	-
16.2(Leakage current and electric strength)	-	0	-
16 & 16.1(Leakage current and electric strength)	-	0	-
15.103(Moisture resistance)	-	0	-
15.102(Moisture resistance)	-	0	-
15.101(Moisture resistance)	-	0	-
15.3(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.1.2(Moisture resistance)	-	0	-
15.1.1(Moisture resistance)	-	0	-
15(Moisture resistance)	-	0	-
14(Transient Over Voltage & table 6)	-	0	-
13.3 & table 4,5(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	0	-
13.2(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	0	-
13(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	0	-
11.103(TEMPERATURE RISE)	-	0	-
11.102(TEMPERATURE RISE)	-	0	-
11.101(TEMPERATURE RISE)	-	0	-
11.8(TEMPERATURE RISE)	-	0	-
11.7(TEMPERATURE RISE)	-	0	-
11.6(TEMPERATURE RISE)	-	0	-
11.5(TEMPERATURE RISE)	-	0	-
11.4(TEMPERATURE RISE)	-	0	-
11.2(TEMPERATURE RISE)	-	0	-
11(TEMPERATURE RISE)	-	0	-
10.101 (Power input and current)	-	0	-
10.1(Power input and current)	-	0	-
8.2(Protection against access to live parts)	-	0	-
8.1.1 to 8.1.5(Protection against access to live parts)	-	0	-
8, 8.1(Protection against access to live parts)	-	0	-
7.1 , 7.12, 7.14,7.15(Marking)	-	0	-
"Cl.6, 6.101 "(60335-2-89)	-	0	-
"Cl.7.101 "(60335-2-89)	-	0	-
"Cl.9 "(60335-2-89)	-	0	-
"Cl. 10 "(60335-2-89)	-	0	-
"Cl. 11.1 "(60335-2-89)	-	0	-
"Cl.18 "(60335-2-89)	-	0	-
"Cl.19.101 "(60335-2-89)	-	0	-
"Cl.19.102 "(60335-2-89)	-	0	-
"Cl.19.103 "(60335-2-89)	-	0	-
"Cl.21.101 "(60335-2-89)	-	0	-
7.1 , 7.12, 7.14,7.15(Marking)	-	0	-
8, 8.1(Protection against access to live parts)	-	0	-
8.1.1 to 8.1.5(Protection against access to live parts)	-	0	-
8.2(Protection against access to live parts)	-	0	-
10.1(Power input and current)	-	0	-
10.101 (Power input and current)	-	0	-
11(TEMPERATURE RISE)	-	0	-
11.2(TEMPERATURE RISE)	-	0	-
11.4(TEMPERATURE RISE)	-	0	-
11.5(TEMPERATURE RISE)	-	0	-
11.6(TEMPERATURE RISE)	-	0	-
11.7(TEMPERATURE RISE)	-	0	-
11.8(TEMPERATURE RISE)	-	0	-
11.101(TEMPERATURE RISE)	-	0	-
11.102(TEMPERATURE RISE)	-	0	-
11.103(TEMPERATURE RISE)	-	0	-
13(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	0	-
13.2(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	0	-
13.3 & table 4,5(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	0	-
14(Transient Over Voltage & table 6)	-	0	-
15(Moisture resistance)	-	0	-
15.1.1(Moisture resistance)	-	0	-
15.1.2(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.3(Moisture resistance)	-	0	-
15.101(Moisture resistance)	-	0	-
15.102(Moisture resistance)	-	0	-
15.103(Moisture resistance)	-	0	-
16 & 16.1(Leakage current and electric strength)	-	0	-
16.2(Leakage current and electric strength)	-	0	-
16.3 & table 7(Leakage current and electric strength)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	-
19(ABNORMAL OPERATION)	-	0	-
19.2(ABNORMAL OPERATION)	-	0	-
19.3(ABNORMAL OPERATION)	-	0	-
19.4(ABNORMAL OPERATION)	-	0	-
19.5(ABNORMAL OPERATION)	-	0	-
19.6(ABNORMAL OPERATION)	-	0	-
19.7 & table 8(ABNORMAL OPERATION)	-	0	-
19.8(ABNORMAL OPERATION)	-	0	-
19.9(ABNORMAL OPERATION)	-	0	-
19.1(ABNORMAL OPERATION)	-	0	-
19.11(ABNORMAL OPERATION)	-	0	-
19.11.1(ABNORMAL OPERATION)	-	0	-
19.11.2(ABNORMAL OPERATION)	-	0	-
19.11.3(ABNORMAL OPERATION)	-	0	-
19.11.4(ABNORMAL OPERATION)	-	0	-
19.12(ABNORMAL OPERATION)	-	0	-
19.13(ABNORMAL OPERATION)	-	0	-
19.14(ABNORMAL OPERATION)	-	0	-
19.15(ABNORMAL OPERATION)	-	0	-
20.1(Stability and mechanical hazards)	-	0	-
20.2(Stability and mechanical hazards)	-	0	-
21.1(MECHANICAL STRENGTH)	-	0	-
21.2(MECHANICAL STRENGTH)	-	0	-
22.101(MECHANICAL STRENGTH)	-	0	-
22.102(MECHANICAL STRENGTH)	-	0	-
22.1(Constructions)	-	0	-
22.2(Constructions)	-	0	-
22.3(Constructions)	-	0	-
22.4(Constructions)	-	0	-
22.5(Constructions)	-	0	-
22.6(Constructions)	-	0	-
22.7 to 22.10(Constructions)	-	0	-
22.11(Constructions)	-	0	-
22.12(Constructions)	-	0	-
22.13 to 22.52(Constructions)	-	0	-
22.101 to 22.102(Constructions)	-	0	-
22.103(Constructions)	-	0	-
22.104(Constructions)	-	0	-
22.105 to 22.114(Constructions)	-	0	-
23.1 & 23.2(Internal wiring)	-	0	-
23.3(Internal wiring)	-	0	-
23.4(Internal wiring)	-	0	-
23.5 to 23.8(Internal wiring)	-	0	-
23.9 ,23.10(Internal wiring)	-	0	-
24(Components)	-	0	-
24.2 to 24.5 (Components)	-	0	-
25.1(Supply connection and external flexible cords)	-	0	-
25.2 to 25.25(Supply connection and external flexible cords)	-	0	-
26, 26.1 to 26.11(Terminals for external conductors)	-	0	-
27, 27.1 to 27.6(Provision for earthing)	-	0	-
28.1, Table No.-14(Screws and connections)	-	0	-
28.2 to 28.4(Screws and connections)	-	0	-
29 and table (creepage and Clearances distances )	-	0	-
29.1 & 29.3(creepage and Clearances distances )	-	0	-
30.1(Resistance to heat and fire)	-	0	-
30.2(Resistance to heat and fire)	-	0	-
30.2.1(Resistance to heat and fire)	-	0	-
30.2.2(Resistance to heat and fire)	-	0	-
30.2.3(Resistance to heat and fire)	-	0	-
31(Resistance to rusting)	-	0	-
V"Cl.32 of IEC 60335-2-89:2010 Cl. 32 of IEC 60335-1-2016 "(60335-2-89)	-	0	-
"Cl.21.102 "(60335-2-89)	-	0	-
"Cl.24.1 "(60335-2-89)	-	0	-
"Cl.24.7 "(60335-2-89)	-	0	-
"Cl.24.101 "(60335-2-89)	-	0	-
"Cl.28 "(60335-2-89)	-	0	-
22.104(Constructions)	-	0	-
22.104(Constructions)	-	0	-
31(Resistance to rusting)	-	0	-
30.2.3(Resistance to heat and fire)	-	0	-
30.2.2(Resistance to heat and fire)	-	0	-
30.2.1(Resistance to heat and fire)	-	0	-
30.2(Resistance to heat and fire)	-	0	-
30.1(Resistance to heat and fire)	-	0	-
29.1 & 29.3(creepage and Clearances distances )	-	0	-
29 and table (creepage and Clearances distances )	-	0	-
28.2 to 28.4(Screws and connections)	-	0	-
28.1, Table No.-14(Screws and connections)	-	0	-
27, 27.1 to 27.6(Provision for earthing)	-	0	-
26, 26.1 to 26.11(Terminals for external conductors)	-	0	-
25.2 to 25.25(Supply connection and external flexible cords)	-	0	-
25.1(Supply connection and external flexible cords)	-	0	-
24.2 to 24.5 (Components)	-	0	-
24(Components)	-	0	-
23.9 ,23.10(Internal wiring)	-	0	-
23.5 to 23.8(Internal wiring)	-	0	-
23.4(Internal wiring)	-	0	-
23.3(Internal wiring)	-	0	-
23.1 & 23.2(Internal wiring)	-	0	-
22.104(Constructions)	-	0	-
22.105 to 22.114(Constructions)	-	0	-
22.104(Constructions)	-	0	-
22.104(Constructions)	-	0	-
22.103(Constructions)	-	0	-
22.101 to 22.102(Constructions)	-	0	-
22.13 to 22.52(Constructions)	-	0	-
22.12(Constructions)	-	0	-
22.11(Constructions)	-	0	-
22.7 to 22.10(Constructions)	-	0	-
22.6(Constructions)	-	0	-
22.5(Constructions)	-	0	-
22.4(Constructions)	-	0	-
22.3(Constructions)	-	0	-
22.2(Constructions)	-	0	-
22.1(Constructions)	-	0	-
22.102(MECHANICAL STRENGTH)	-	0	-
22.101(MECHANICAL STRENGTH)	-	0	-
21.2(MECHANICAL STRENGTH)	-	0	-
21.1(MECHANICAL STRENGTH)	-	0	-
20.2(Stability and mechanical hazards)	-	0	-
20.1(Stability and mechanical hazards)	-	0	-
19.15(ABNORMAL OPERATION)	-	0	-
19.14(ABNORMAL OPERATION)	-	0	-
19.13(ABNORMAL OPERATION)	-	0	-
19.12(ABNORMAL OPERATION)	-	0	-
19.11.4(ABNORMAL OPERATION)	-	0	-
19.11.3(ABNORMAL OPERATION)	-	0	-
19.11.2(ABNORMAL OPERATION)	-	0	-
19.11.1(ABNORMAL OPERATION)	-	0	-
19.11(ABNORMAL OPERATION)	-	0	-
19.1(ABNORMAL OPERATION)	-	0	-
19.9(ABNORMAL OPERATION)	-	0	-
19.8(ABNORMAL OPERATION)	-	0	-
19.7 & table 8(ABNORMAL OPERATION)	-	0	-
19.6(ABNORMAL OPERATION)	-	0	-
19.5(ABNORMAL OPERATION)	-	0	-
19.4(ABNORMAL OPERATION)	-	0	-
19.3(ABNORMAL OPERATION)	-	0	-
19.2(ABNORMAL OPERATION)	-	0	-
19(ABNORMAL OPERATION)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	-
16.3 & table 7(Leakage current and electric strength)	-	0	-
16.2(Leakage current and electric strength)	-	0	-
16 & 16.1(Leakage current and electric strength)	-	0	-
15.103(Moisture resistance)	-	0	-
15.102(Moisture resistance)	-	0	-
15.101(Moisture resistance)	-	0	-
15.3(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.1.2(Moisture resistance)	-	0	-
15.1.1(Moisture resistance)	-	0	-
15(Moisture resistance)	-	0	-
14(Transient Over Voltage & table 6)	-	0	-
13.3 & table 4,5(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	0	-
13.2(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	0	-
13(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	0	-
11.103(TEMPERATURE RISE)	-	0	-
11.102(TEMPERATURE RISE)	-	0	-
11.101(TEMPERATURE RISE)	-	0	-
11.8(TEMPERATURE RISE)	-	0	-
11.7(TEMPERATURE RISE)	-	0	-
11.6(TEMPERATURE RISE)	-	0	-
11.5(TEMPERATURE RISE)	-	0	-
11.4(TEMPERATURE RISE)	-	0	-
11.2(TEMPERATURE RISE)	-	0	-
11(TEMPERATURE RISE)	-	0	-
10.101 (Power input and current)	-	0	-
10.1(Power input and current)	-	0	-
8.2(Protection against access to live parts)	-	0	-
8.1.1 to 8.1.5(Protection against access to live parts)	-	0	-
8, 8.1(Protection against access to live parts)	-	0	-
7.1 , 7.12, 7.14,7.15(Marking)	-	0	-
"Cl.6, 6.101 "(60335-2-89)	-	0	-
"Cl.7.101 "(60335-2-89)	-	0	-
"Cl.9 "(60335-2-89)	-	0	-
"Cl. 10 "(60335-2-89)	-	0	-
"Cl. 11.1 "(60335-2-89)	-	0	-
"Cl.18 "(60335-2-89)	-	0	-
"Cl.19.101 "(60335-2-89)	-	0	-
"Cl.19.102 "(60335-2-89)	-	0	-
"Cl.19.103 "(60335-2-89)	-	0	-
"Cl.21.101 "(60335-2-89)	-	0	-
7.1 , 7.12, 7.14,7.15(Marking)	-	0	-
8, 8.1(Protection against access to live parts)	-	0	-
8.1.1 to 8.1.5(Protection against access to live parts)	-	0	-
8.2(Protection against access to live parts)	-	0	-
10.1(Power input and current)	-	0	-
10.101 (Power input and current)	-	0	-
11(TEMPERATURE RISE)	-	0	-
11.2(TEMPERATURE RISE)	-	0	-
11.4(TEMPERATURE RISE)	-	0	-
11.5(TEMPERATURE RISE)	-	0	-
11.6(TEMPERATURE RISE)	-	0	-
11.7(TEMPERATURE RISE)	-	0	-
11.8(TEMPERATURE RISE)	-	0	-
11.101(TEMPERATURE RISE)	-	0	-
11.102(TEMPERATURE RISE)	-	0	-
11.103(TEMPERATURE RISE)	-	0	-
13(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	0	-
13.2(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	0	-
13.3 & table 4,5(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	0	-
14(Transient Over Voltage & table 6)	-	0	-
15(Moisture resistance)	-	0	-
15.1.1(Moisture resistance)	-	0	-
15.1.2(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.3(Moisture resistance)	-	0	-
15.101(Moisture resistance)	-	0	-
15.102(Moisture resistance)	-	0	-
15.103(Moisture resistance)	-	0	-
16 & 16.1(Leakage current and electric strength)	-	0	-
16.2(Leakage current and electric strength)	-	0	-
16.3 & table 7(Leakage current and electric strength)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	-
19(ABNORMAL OPERATION)	-	0	-
19.2(ABNORMAL OPERATION)	-	0	-
19.3(ABNORMAL OPERATION)	-	0	-
19.4(ABNORMAL OPERATION)	-	0	-
19.5(ABNORMAL OPERATION)	-	0	-
19.6(ABNORMAL OPERATION)	-	0	-
19.7 & table 8(ABNORMAL OPERATION)	-	0	-
19.8(ABNORMAL OPERATION)	-	0	-
19.9(ABNORMAL OPERATION)	-	0	-
19.1(ABNORMAL OPERATION)	-	0	-
19.11(ABNORMAL OPERATION)	-	0	-
19.11.1(ABNORMAL OPERATION)	-	0	-
19.11.2(ABNORMAL OPERATION)	-	0	-
19.11.3(ABNORMAL OPERATION)	-	0	-
19.12(ABNORMAL OPERATION)	-	0	-
19.13(ABNORMAL OPERATION)	-	0	-
19.14(ABNORMAL OPERATION)	-	0	-
19.15(ABNORMAL OPERATION)	-	0	-
20.1(Stability and mechanical hazards)	-	0	-
20.2(Stability and mechanical hazards)	-	0	-
21.1(MECHANICAL STRENGTH)	-	0	-
21.2(MECHANICAL STRENGTH)	-	0	-
22.101(MECHANICAL STRENGTH)	-	0	-
22.102(MECHANICAL STRENGTH)	-	0	-
22.1(Constructions)	-	0	-
22.2(Constructions)	-	0	-
22.3(Constructions)	-	0	-
22.4(Constructions)	-	0	-
22.5(Constructions)	-	0	-
22.6(Constructions)	-	0	-
22.7 to 22.10(Constructions)	-	0	-
22.11(Constructions)	-	0	-
22.12(Constructions)	-	0	-
22.13 to 22.52(Constructions)	-	0	-
22.101 to 22.102(Constructions)	-	0	-
22.103(Constructions)	-	0	-
22.104(Constructions)	-	0	-
22.105 to 22.114(Constructions)	-	0	-
23.1 & 23.2(Internal wiring)	-	0	-
23.3(Internal wiring)	-	0	-
23.4(Internal wiring)	-	0	-
23.5 to 23.8(Internal wiring)	-	0	-
23.9 ,23.10(Internal wiring)	-	0	-
24(Components)	-	0	-
24.2 to 24.5 (Components)	-	0	-
25.1(Supply connection and external flexible cords)	-	0	-
25.2 to 25.25(Supply connection and external flexible cords)	-	0	-
26, 26.1 to 26.11(Terminals for external conductors)	-	0	-
27, 27.1 to 27.6(Provision for earthing)	-	0	-
28.1, Table No.-14(Screws and connections)	-	0	-
28.2 to 28.4(Screws and connections)	-	0	-
29 and table (creepage and Clearances distances )	-	0	-
29.1 & 29.3(creepage and Clearances distances )	-	0	-
30.1(Resistance to heat and fire)	-	0	-
30.2(Resistance to heat and fire)	-	0	-
30.2.1(Resistance to heat and fire)	-	0	-
30.2.2(Resistance to heat and fire)	-	0	-
30.2.3(Resistance to heat and fire)	-	0	-
31(Resistance to rusting)	-	0	-
V"Cl.32 of IEC 60335-2-89:2010 Cl. 32 of IEC 60335-1-2016 "(60335-2-89)	-	0	-
"Cl.21.102 "(60335-2-89)	-	0	-
"Cl.24.1 "(60335-2-89)	-	0	-
"Cl.24.7 "(60335-2-89)	-	0	-
"Cl.24.101 "(60335-2-89)	-	0	-
"Cl.28 "(60335-2-89)	-	0	-
22.104(Constructions)	-	0	-
22.104(Constructions)	-	0	-
31(Resistance to rusting)	-	0	-
30.2.3(Resistance to heat and fire)	-	0	-
30.2.2(Resistance to heat and fire)	-	0	-
30.2.1(Resistance to heat and fire)	-	0	-
30.2(Resistance to heat and fire)	-	0	-
30.1(Resistance to heat and fire)	-	0	-
29.1 & 29.3(creepage and Clearances distances )	-	0	-
29 and table (creepage and Clearances distances )	-	0	-
28.2 to 28.4(Screws and connections)	-	0	-
28.1, Table No.-14(Screws and connections)	-	0	-
27, 27.1 to 27.6(Provision for earthing)	-	0	-
26, 26.1 to 26.11(Terminals for external conductors)	-	0	-
25.2 to 25.25(Supply connection and external flexible cords)	-	0	-
25.1(Supply connection and external flexible cords)	-	0	-
24.2 to 24.5 (Components)	-	0	-
24(Components)	-	0	-
23.9 ,23.10(Internal wiring)	-	0	-
23.5 to 23.8(Internal wiring)	-	0	-
23.4(Internal wiring)	-	0	-
23.3(Internal wiring)	-	0	-
23.1 & 23.2(Internal wiring)	-	0	-
22.104(Constructions)	-	0	-
22.105 to 22.114(Constructions)	-	0	-
22.104(Constructions)	-	0	-
22.104(Constructions)	-	0	-
22.103(Constructions)	-	0	-
22.101 to 22.102(Constructions)	-	0	-
22.13 to 22.52(Constructions)	-	0	-
22.12(Constructions)	-	0	-
22.11(Constructions)	-	0	-
22.7 to 22.10(Constructions)	-	0	-
22.6(Constructions)	-	0	-
22.5(Constructions)	-	0	-
22.4(Constructions)	-	0	-
22.3(Constructions)	-	0	-
22.2(Constructions)	-	0	-
22.1(Constructions)	-	0	-
22.102(MECHANICAL STRENGTH)	-	0	-
22.101(MECHANICAL STRENGTH)	-	0	-
21.2(MECHANICAL STRENGTH)	-	0	-
21.1(MECHANICAL STRENGTH)	-	0	-
20.2(Stability and mechanical hazards)	-	0	-
20.1(Stability and mechanical hazards)	-	0	-
19.15(ABNORMAL OPERATION)	-	0	-
19.14(ABNORMAL OPERATION)	-	0	-
19.13(ABNORMAL OPERATION)	-	0	-
19.12(ABNORMAL OPERATION)	-	0	-
19.11.3(ABNORMAL OPERATION)	-	0	-
19.11.2(ABNORMAL OPERATION)	-	0	-
19.11.1(ABNORMAL OPERATION)	-	0	-
19.11(ABNORMAL OPERATION)	-	0	-
19.1(ABNORMAL OPERATION)	-	0	-
19.9(ABNORMAL OPERATION)	-	0	-
19.8(ABNORMAL OPERATION)	-	0	-
19.7 & table 8(ABNORMAL OPERATION)	-	0	-
19.6(ABNORMAL OPERATION)	-	0	-
19.5(ABNORMAL OPERATION)	-	0	-
19.4(ABNORMAL OPERATION)	-	0	-
19.3(ABNORMAL OPERATION)	-	0	-
19.2(ABNORMAL OPERATION)	-	0	-
19(ABNORMAL OPERATION)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	-
16.3 & table 7(Leakage current and electric strength)	-	0	-
16.2(Leakage current and electric strength)	-	0	-
16 & 16.1(Leakage current and electric strength)	-	0	-
15.103(Moisture resistance)	-	0	-
15.102(Moisture resistance)	-	0	-
15.101(Moisture resistance)	-	0	-
15.3(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.1.2(Moisture resistance)	-	0	-
15.1.1(Moisture resistance)	-	0	-
15(Moisture resistance)	-	0	-
14(Transient Over Voltage & table 6)	-	0	-
13.3 & table 4,5(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	0	-
13.2(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	0	-
13(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	0	-
11.103(TEMPERATURE RISE)	-	0	-
11.102(TEMPERATURE RISE)	-	0	-
11.101(TEMPERATURE RISE)	-	0	-
11.8(TEMPERATURE RISE)	-	0	-
11.7(TEMPERATURE RISE)	-	0	-
11.6(TEMPERATURE RISE)	-	0	-
11.5(TEMPERATURE RISE)	-	0	-
11.4(TEMPERATURE RISE)	-	0	-
11.2(TEMPERATURE RISE)	-	0	-
11(TEMPERATURE RISE)	-	0	-
10.101 (Power input and current)	-	0	-
10.1(Power input and current)	-	0	-
8.2(Protection against access to live parts)	-	0	-
8.1.1 to 8.1.5(Protection against access to live parts)	-	0	-
8, 8.1(Protection against access to live parts)	-	0	-
7.1 , 7.12, 7.14,7.15(Marking)	-	0	-
"Cl.6, 6.101 "(60335-2-89)	-	0	-
"Cl.7.101 "(60335-2-89)	-	0	-
"Cl.9 "(60335-2-89)	-	0	-
"Cl. 10 "(60335-2-89)	-	0	-
"Cl. 11.1 "(60335-2-89)	-	0	-
"Cl.18 "(60335-2-89)	-	0	-
"Cl.19.101 "(60335-2-89)	-	0	-
"Cl.19.102 "(60335-2-89)	-	0	-
"Cl.19.103 "(60335-2-89)	-	0	-
"Cl.21.101 "(60335-2-89)	-	0	-

19 Mar, 2029

-
-

169

IS 2465 (1984)

Specification for cables for motor vehicles (Second Revision)

Cable For Motor Vehicles

14550 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(Insulation)	-	100	-
7.3(Insulation)	-	100	-
8(Core Identification)	-	100	-
9(Laying up of cores)	-	100	-
10.1.1(Sheathing )	-	100	-
10.2(Sheathing )	-	100	-
3 & 6(Flexibility class)	-	100	-
3 & 6(Construction)	-	500	-
3 & 6(Diameter of wire(mm))	-	750	-
3 & 6(Annealing test)	-	250	-
7.2, 10.3, 11(Dimensions & thickness )	-	750	-
4.2 & 12.1(Without Ageing For Insulation Tensile Strength (N/mm²))	-	1100	-
4.2 & 12.1, (f), 1(elongation at break (N/mm²))	-	1100	-
4.2 & 12.1, (f), 1(Tensile Strength at break (N/mm²))	-	1300	-
4.2 & 12.1, (e), 1(elongation test at break)	-	1300	-
4.2 & 12.1, (e), 1(Tensile strength at break)	-	250	-
4.2 & 12.1, (f), 2(Ageing in air oven)	-	1000	-
4.2 & 12.1, (f), 3(Ageing in oxygen bomb)	-	750	-
4.2 & 12.1, (e), 2(After Ageing in air oven)	-	600	-
4.2 & 12.1, (e), 3(Loss of mass test (mg/cm²) of Insulation)	-	1000	-
14(High Voltage Test)	-	750	-
15(SPARK TEST FOR SINGLE CORE GENERAL WIRING CABLES)	-	1000	-
16.1(CAPACITANCE TEST FOR PVC INSULATION IGNITION CABLE)	-	500	-
17.1(OZONE RESISTANCE TEST FOR IGNITION CABLES)	-	500	-
18.1(EFFECT OF HEAT ON FLEXIBILITY FOR IGNITION CABLES)	-	750	-
22.1(FLAMMABILITY TEST)	-	800	-
19.1(EFFECT OF OIL ON IGNITION CABLES)	-	600	-
20.3(EFFECT OF LUBRICATING OIL)	-	1000	-
20.3(EFFECT OF BRAKE FLUID)	-	1000	-
20.3(EFFECT OF DIESEL)	-	1000	-
20.3(Increase in average diameter %)	-	1000	-
21.1(EFFECT OF COOLING ON FLEXIBILITY)	-	500	-
23.1(Manufacturer's Identification)	-	100	-
24.2(PACKING AND MARKING)	-	100	-
7.1(Insulation)	-	0	-
7.3(Insulation)	-	0	-
8(Core Identification)	-	0	-
9(Laying up of cores)	-	0	-
10.1.1(Sheathing )	-	0	-
10.2(Sheathing )	-	0	-
3 & 6(Flexibility class)	-	0	-
3 & 6(Construction)	-	0	-
3 & 6(Diameter of wire(mm))	-	0	-
3 & 6(Annealing test)	-	0	-
7.2, 10.3, 11(Dimensions & thickness )	-	0	-
4.2 & 12.1(Without Ageing For Insulation Tensile Strength (N/mm²))	-	0	-
4.2 & 12.1, (f), 1(elongation at break (N/mm²))	-	0	-
4.2 & 12.1, (f), 1(Tensile Strength at break (N/mm²))	-	0	-
4.2 & 12.1, (e), 1(elongation test at break)	-	0	-
4.2 & 12.1, (e), 1(Tensile strength at break)	-	0	-
4.2 & 12.1, (f), 2(Ageing in air oven)	-	0	-
4.2 & 12.1, (f), 3(Ageing in oxygen bomb)	-	0	-
4.2 & 12.1, (e), 2(After Ageing in air oven)	-	0	-
4.2 & 12.1, (e), 3(Loss of mass test (mg/cm²) of Insulation)	-	0	-
14(High Voltage Test)	-	0	-
15(SPARK TEST FOR SINGLE CORE GENERAL WIRING CABLES)	-	0	-
16.1(CAPACITANCE TEST FOR PVC INSULATION IGNITION CABLE)	-	0	-
17.1(OZONE RESISTANCE TEST FOR IGNITION CABLES)	-	0	-
18.1(EFFECT OF HEAT ON FLEXIBILITY FOR IGNITION CABLES)	-	0	-
22.1(FLAMMABILITY TEST)	-	0	-
19.1(EFFECT OF OIL ON IGNITION CABLES)	-	0	-
20.3(EFFECT OF LUBRICATING OIL)	-	0	-
20.3(EFFECT OF BRAKE FLUID)	-	0	-
20.3(EFFECT OF DIESEL)	-	0	-
20.3(Increase in average diameter %)	-	0	-
21.1(EFFECT OF COOLING ON FLEXIBILITY)	-	0	-
23.1(Manufacturer's Identification)	-	0	-
24.2(PACKING AND MARKING)	-	0	-
7.1(Insulation)	-	0	-
7.3(Insulation)	-	0	-
8(Core Identification)	-	0	-
9(Laying up of cores)	-	0	-
10.1.1(Sheathing )	-	0	-
10.2(Sheathing )	-	0	-
3 & 6(Flexibility class)	-	0	-
3 & 6(Construction)	-	0	-
3 & 6(Diameter of wire(mm))	-	0	-
3 & 6(Annealing test)	-	0	-
7.2, 10.3, 11(Dimensions & thickness )	-	0	-
4.2 & 12.1(Without Ageing For Insulation Tensile Strength (N/mm²))	-	0	-
4.2 & 12.1, (f), 1(elongation at break (N/mm²))	-	0	-
4.2 & 12.1, (f), 1(Tensile Strength at break (N/mm²))	-	0	-
4.2 & 12.1, (e), 1(elongation test at break)	-	0	-
4.2 & 12.1, (e), 1(Tensile strength at break)	-	0	-
4.2 & 12.1, (f), 2(Ageing in air oven)	-	0	-
4.2 & 12.1, (f), 3(Ageing in oxygen bomb)	-	0	-
4.2 & 12.1, (e), 2(After Ageing in air oven)	-	0	-
4.2 & 12.1, (e), 3(Loss of mass test (mg/cm²) of Insulation)	-	0	-
14(High Voltage Test)	-	0	-
15(SPARK TEST FOR SINGLE CORE GENERAL WIRING CABLES)	-	0	-
16.1(CAPACITANCE TEST FOR PVC INSULATION IGNITION CABLE)	-	0	-
17.1(OZONE RESISTANCE TEST FOR IGNITION CABLES)	-	0	-
18.1(EFFECT OF HEAT ON FLEXIBILITY FOR IGNITION CABLES)	-	0	-
22.1(FLAMMABILITY TEST)	-	0	-
19.1(EFFECT OF OIL ON IGNITION CABLES)	-	0	-
20.3(EFFECT OF LUBRICATING OIL)	-	0	-
20.3(EFFECT OF BRAKE FLUID)	-	0	-
20.3(EFFECT OF DIESEL)	-	0	-
20.3(Increase in average diameter %)	-	0	-
21.1(EFFECT OF COOLING ON FLEXIBILITY)	-	0	-
23.1(Manufacturer's Identification)	-	0	-
24.2(PACKING AND MARKING)	-	0	-
7.1(Insulation)	-	100	-
7.3(Insulation)	-	100	-
8(Core Identification)	-	100	-
9(Laying up of cores)	-	100	-
10.1.1(Sheathing )	-	100	-
10.2(Sheathing )	-	100	-
3 & 6(Flexibility class)	-	100	-
3 & 6(Construction)	-	100	-
3 & 6(Diameter of wire(mm))	-	100	-
3 & 6(Annealing test)	-	100	-
7.2, 10.3, 11(Dimensions & thickness )	-	100	-
4.2 & 12.1(Without Ageing For Insulation Tensile Strength (N/mm²))	-	1100	-
4.2 & 12.1, (f), 1(elongation at break (N/mm²))	-	1100	-
4.2 & 12.1, (f), 1(Tensile Strength at break (N/mm²))	-	1100	-
4.2 & 12.1, (e), 1(elongation test at break)	-	1100	-
4.2 & 12.1, (e), 1(Tensile strength at break)	-	1100	-
4.2 & 12.1, (f), 2(Ageing in air oven)	-	1300	-
4.2 & 12.1, (f), 3(Ageing in oxygen bomb)	-	1000	-
4.2 & 12.1, (e), 2(After Ageing in air oven)	-	1300	-
4.2 & 12.1, (e), 3(Loss of mass test (mg/cm²) of Insulation)	-	250	-
14(High Voltage Test)	-	750	-
15(SPARK TEST FOR SINGLE CORE GENERAL WIRING CABLES)	-	1000	-
16.1(CAPACITANCE TEST FOR PVC INSULATION IGNITION CABLE)	-	500	-
17.1(OZONE RESISTANCE TEST FOR IGNITION CABLES)	-	500	-
18.1(EFFECT OF HEAT ON FLEXIBILITY FOR IGNITION CABLES)	-	750	-
22.1(FLAMMABILITY TEST)	-	800	-
19.1(EFFECT OF OIL ON IGNITION CABLES)	-	600	-
20.3(EFFECT OF LUBRICATING OIL)	-	1000	-
20.3(EFFECT OF BRAKE FLUID)	-	1000	-
20.3(EFFECT OF DIESEL)	-	1000	-
20.3(Increase in average diameter %)	-	100	-
21.1(EFFECT OF COOLING ON FLEXIBILITY)	-	500	-
23.1(Manufacturer's Identification)	-	100	-
24.2(PACKING AND MARKING)	-	100	-
3 & 6(Persulphate Test)	-	750	-
3 & 6(Conductor resistance Test (ohm/km at 20˚c))	-	100	-
7.2, 10.3, 11(Dimensions & thickness )	-	100	-
7.2, 10.3, 11(Overall Dimension (mm))	-	100	-
20.3(EFFECT OF LUBRICATING OIL)	-	1000	-
20.3(EFFECT OF BRAKE FLUID)	-	1000	-
20.3(EFFECT OF DIESEL)	-	1000	-
20.3(Wrapping test)	-	500	-
21.2(EFFECT OF COOLING ON FLEXIBILITY)	-	500	-
21.2(EFFECT OF COOLING ON FLEXIBILITY)	-	500	-
24.2.1(PACKING AND MARKING)	-	100	-
12.1.b(Persulphate test (when applicable))	-	500	-
6.1, 12.3, 12.1.c(Conductor Resistance)	-	250	-
12.1.e4(Hot deformation)	-	1000	-
12.1.e5(Heat Shock)	-	750	-
22.1(FLAMMABILITY TEST)	-	800	-
23.1(Manufacturer's Identification)	-	100	-
24.1(PACKING AND MARKING)	-	100	-
19.2(EFFECT OF OIL ON IGNITION CABLES)	-	600	-
4.2 & 12.1, (e), 3(Loss of mass test (mg/cm²) of Sheath)	-	250	-
4.2 & 12.1, (e), 4(Hot deformation test (%) of Insulation)	-	1000	-
4.2 & 12.1, (e), 4(Hot deformation test (%) of Sheath)	-	1000	-
4.2 & 12.1, (e), 5(Heat Shock Test of Insulation)	-	750	-
4.2 & 12.1, (e), 5(Heat Shock Test of Sheath)	-	750	-
4.2 & 12.1, (e), 6(Shrinkage Test (%) of Insulation)	-	600	-
4.2 & 12.1, (e), 6(Shrinkage Test (%) of Sheath)	-	600	-

19 Mar, 2029

-
-

170

IS 16893 : Part 3 (2018)

Secondary Lithium - lon Cells For the Propulsion of Electric Road Vehicles Part 3 Safety Requirements

Secondary lithium-ion cells for the propulsion of EV

200000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(General Charge Conditions)	-	1000	5% discount for BIS
5.2(Capacity)	-	20000	5% discount for BIS
5.3(SOC Adjustment)	-	20000	5% discount for BIS
6.2.1(Vibration)	-	20000	5% discount for BIS
6.2.2(Mechanical Shock)	-	20000	5% discount for BIS
6.2.3(Crush)	-	15000	5% discount for BIS
6.3.1(High Temperature Endurance)	-	34000	5% discount for BIS
6.3.2(Temperature Cycling)	-	15000	5% discount for BIS
6.4.1(External Short Circuit)	-	15000	5% discount for BIS
6.4.2(Overcharge)	-	20000	5% discount for BIS
6.4.3(Forced Discharge)	-	20000	5% discount for BIS
5.1(General Charge Conditions)	-	0	-
5.2(Capacity)	-	0	-
5.3(SOC Adjustment)	-	0	-
6.2.1(Vibration)	-	0	-
6.2.2(Mechanical Shock)	-	0	-
6.2.3(Crush)	-	0	-
6.3.1(High Temperature Endurance)	-	0	-
6.3.2(Temperature Cycling)	-	0	-
6.4.1(External Short Circuit)	-	0	-
6.4.2(Overcharge)	-	0	-
6.4.3(Forced Discharge)	-	0	-
5.1(General Charge Conditions)	-	0	-
5.2(Capacity)	-	0	-
5.3(SOC Adjustment)	-	0	-
6.2.1(Vibration)	-	0	-
6.2.2(Mechanical Shock)	-	0	-
6.2.3(Crush)	-	0	-
6.3.1(High Temperature Endurance)	-	0	-
6.3.2(Temperature Cycling)	-	0	-
6.4.1(External Short Circuit)	-	0	-
6.4.2(Overcharge)	-	0	-
6.4.3(Forced Discharge)	-	0	-
6.4.3(Forced Discharge)	-	0	-

19 Mar, 2029

-
-

171

IS 16047 : Part 3 (2018)

Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes ” Secondary Lithium Cells and Batteries for Portable Applications Part 3 Prismatic and Cylindrical Lithium Secondary Cells, and Batteries Made From Them ( First Revision )

Secondary lithium cells and batteries for portable app.

178500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Cell Designation and Marking)	-	500	5% discount for BIS
7.1, 7.2(Charging Procedure for Test Purpose)	-	12500	5% discount for BIS
7.3.1(Discharge Performance at 20°C (Rated Capacity))	-	10000	5% discount for BIS
7.3.2("Discharge Performance at -20°C ")	-	15000	5% discount for BIS
7.3.3(High Rate Discharge Performance at 20°C)	-	12500	5% discount for BIS
7.4(Charge (capacity) Retention and Recovery)	-	7500	5% discount for BIS
7.5(Charge (Capacity) Recovery After Long Term Storage)	-	12500	5% discount for BIS
7.6.2(Endurance In Cycles at a Rate of 0.2It A)	-	40000	5% discount for BIS
7.6.3("Endurance in Cycles at a Rate of 0.5It A (Accelerated Test Procedure) ")	-	60000	5% discount for BIS
7.7(Battery Internal Resistance)	-	3000	5% discount for BIS
7.8(Electrostatic Discharge (ESD))	-	5000	5% discount for BIS
5(Cell Designation and Marking)	-	0	-
7.1, 7.2(Charging Procedure for Test Purpose)	-	0	-
7.3.1(Discharge Performance at 20°C (Rated Capacity))	-	0	-
7.3.2("Discharge Performance at -20°C ")	-	0	-
7.3.3(High Rate Discharge Performance at 20°C)	-	0	-
7.4(Charge (capacity) Retention and Recovery)	-	0	-
7.5(Charge (Capacity) Recovery After Long Term Storage)	-	0	-
7.6.2(Endurance In Cycles at a Rate of 0.2It A)	-	0	-
7.6.3("Endurance in Cycles at a Rate of 0.5It A (Accelerated Test Procedure) ")	-	0	-
7.7(Battery Internal Resistance)	-	0	-
7.8(Electrostatic Discharge (ESD))	-	0	-

19 Mar, 2029

-
-

172

IS 16822 (2019)

Secondary cells and batteries containing alkaline or other non - Acid electrolytes - Secondary lithium cells and batteries for use in industrial applications

Secondary lithium cells and batteries

560000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking and Designation)	-	500	5% discount for BIS
6, 6.1, 6.2(Charging Procedures For Test Purposes)	-	45000	5% discount for BIS
6.3, 6.3.1(Discharge Performance, Discharge Performance at +25°C)	-	70000	5% discount for BIS
6.3.2(Discharge performance at Low Temperature)	-	90000	5% discount for BIS
6.3.3(High Rate Permissible Current)	-	44500	5% discount for BIS
6.4(Charge (Capacity) Retention and Recovery)	-	60000	5% discount for BIS
6.5(Cell and Battery Internal Resistance)	-	50000	5% discount for BIS
6.6(Endurance)	-	200000	5% discount for BIS
5(Marking and Designation)	-	0	-
6, 6.1, 6.2(Charging Procedures For Test Purposes)	-	0	-
6.3, 6.3.1(Discharge Performance, Discharge Performance at +25°C)	-	0	-
6.3.2(Discharge performance at Low Temperature)	-	0	-
6.3.3(High Rate Permissible Current)	-	0	-
6.4(Charge (Capacity) Retention and Recovery)	-	0	-
6.5(Cell and Battery Internal Resistance)	-	0	-
6.6(Endurance)	-	0	-

19 Mar, 2029

-
-

173

IS 16805 (2018)

Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes ” Safety Requirements for Secondary Lithium Cells and Batteries, for Use in Industrial Applications

Secondary lithium cells and batteries

256000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(General Safety Considerations)	-	2000	5% discount for BIS
7.1(Charging Procedures For Test Purposes)	-	30000	5% discount for BIS
7.2.1(External Short-Circuit Test)	-	25000	5% discount for BIS
7.2.2(Impact Test)	-	10000	5% discount for BIS
7.2.3(Drop Test)	-	2500	5% discount for BIS
7.2.4(Thermal Abuse Test)	-	40000	5% discount for BIS
7.2.5(Overcharge Test)	-	60000	5% discount for BIS
7.2.6(Forced Discharge Test)	-	35000	5% discount for BIS
7.3.3(Propagation Test)	-	20000	5% discount for BIS
8(Battery System Safety)	-	30000	5% discount for BIS
9(Information For Safety)	-	500	5% discount for BIS
10(Marking and Designation)	-	1000	5% discount for BIS
5(General Safety Considerations)	-	0	-
7.1(Charging Procedures For Test Purposes)	-	0	-
7.2.1(External Short-Circuit Test)	-	0	-
7.2.2(Impact Test)	-	0	-
7.2.3(Drop Test)	-	0	-
7.2.4(Thermal Abuse Test)	-	0	-
7.2.5(Overcharge Test)	-	0	-
7.2.6(Forced Discharge Test)	-	0	-
7.3.3(Propagation Test)	-	0	-
8(Battery System Safety)	-	0	-
9(Information For Safety)	-	0	-
10(Marking and Designation)	-	0	-
5(General Safety Considerations)	-	0	-
7.1(Charging Procedures For Test Purposes)	-	0	-
7.2.1(External Short-Circuit Test)	-	0	-
7.2.2(Impact Test)	-	0	-
7.2.3(Drop Test)	-	0	-
7.2.4(Thermal Abuse Test)	-	0	-
7.2.5(Overcharge Test)	-	0	-
7.2.6(Forced Discharge Test)	-	0	-
7.3.3(Propagation Test)	-	0	-
8(Battery System Safety)	-	0	-
9(Information For Safety)	-	0	-
10(Marking and Designation)	-	0	-

19 Mar, 2029

-
-

174

IS 13369 (1992)

Stationary lead - Acid batteries (With Tubular Positive Plates) in monobloc container - Specification

Stationary lead acid battery

355000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 11.2(IS 13369-1992, Amndt. 1 to 3)	-	500	5% discount for BIS
Cl. 11.4(IS 13369-1992, Amndt. 1 to 3)	-	1500	5% discount for BIS
Cl. 11.5(IS 13369-1992, Amndt. 1 to 3)	-	27500	5% discount for BIS
Cl. 11.6(IS 13369-1992, Amndt. 1 to 3)	-	90000	5% discount for BIS
Cl. 11.7(IS 13369-1992, Amndt. 1 to 3)	-	125000	5% discount for BIS
Cl. 11.8(IS 13369-1992, Amndt. 1 to 3)	-	30000	5% discount for BIS
Cl. 11.9(IS 13369-1992, Amndt. 1 to 3)	-	40000	5% discount for BIS
Cl. 11.10(IS 13369-1992, Amndt. 1 to 3)	-	35000	5% discount for BIS
Cl. 11.2(IS 13369-1992, Amndt. 1 to 3)	-	0	-
Cl. 11.4(IS 13369-1992, Amndt. 1 to 3)	-	0	-
Cl. 11.5(IS 13369-1992, Amndt. 1 to 3)	-	0	-
Cl. 11.6(IS 13369-1992, Amndt. 1 to 3)	-	0	-
Cl. 11.7(IS 13369-1992, Amndt. 1 to 3)	-	0	-
Cl. 11.8(IS 13369-1992, Amndt. 1 to 3)	-	0	-
Cl. 11.9(IS 13369-1992, Amndt. 1 to 3)	-	0	-
Cl. 11.10(IS 13369-1992, Amndt. 1 to 3)	-	0	-
Cl. 11.2(IS 13369-1992, Amndt. 1 to 3)	-	0	-
Cl. 11.4(IS 13369-1992, Amndt. 1 to 3)	-	0	-
Cl. 11.5(IS 13369-1992, Amndt. 1 to 3)	-	0	-
Cl. 11.6(IS 13369-1992, Amndt. 1 to 3)	-	0	-
Cl. 11.7(IS 13369-1992, Amndt. 1 to 3)	-	0	-
Cl. 11.8(IS 13369-1992, Amndt. 1 to 3)	-	0	-
Cl. 11.9(IS 13369-1992, Amndt. 1 to 3)	-	0	-
Cl. 11.10(IS 13369-1992, Amndt. 1 to 3)	-	0	-

19 Mar, 2029

-
-

175

IS 14257 (2019)

Lead - Acid storage batteries for motor vehicles with light weight and high cranking performance - Specification (First Revision)

Lead acid storage batteries with 12V rated voltage

665000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Rating)	-	500	5% discount for BIS
6(Capacities, Dimensions, Mass & Layout)	-	1000	5% discount for BIS
8(Marking)	-	500	5% discount for BIS
9.3.1(Physical Examination)	-	500	5% discount for BIS
9.3.2(Dimensions and Layout)	-	1000	5% discount for BIS
9.3.3(Marking)	-	500	5% discount for BIS
9.3.4(Capacity (5h Rate) Test)	-	35000	5% discount for BIS
9.3.5(High Rate Discharge Test)	-	25000	5% discount for BIS
9.3.6(Cold Cranking Performance Test (CCA))	-	47500	5% discount for BIS
9.3.7(Reserve Capacity Test)	-	27500	5% discount for BIS
9.3.8(Charge acceptance test)	-	22500	5% discount for BIS
9.3.9(Water Consumption Test)	-	55000	5% discount for BIS
9.3.10(Charge Retention Test)	-	25000	5% discount for BIS
9.3.11(Light Load Endurance (LLE) Test)	-	80000	5% discount for BIS
9.3.12(Life Cycle Test)	-	125000	5% discount for BIS
9.3.13(Overcharge Endurance Test)	-	150000	5% discount for BIS
9.3.14(Electrolyte Retention Test)	-	25000	5% discount for BIS
9.3.15(Vibration Resistance Test)	-	12500	5% discount for BIS
9.3.16(Strength of Terminal Test)	-	5000	5% discount for BIS
9.3.17(Robustness to Fastening Test)	-	6000	5% discount for BIS
9.3.18(Test For Dry-Charged Battery)	-	20000	5% discount for BIS
5(Rating)	-	0	-
6(Capacities, Dimensions, Mass & Layout)	-	0	-
8(Marking)	-	0	-
9.3.1(Physical Examination)	-	0	-
9.3.2(Dimensions and Layout)	-	0	-
9.3.3(Marking)	-	0	-
9.3.4(Capacity (5h Rate) Test)	-	0	-
9.3.5(High Rate Discharge Test)	-	0	-
9.3.6(Cold Cranking Performance Test (CCA))	-	0	-
9.3.7(Reserve Capacity Test)	-	0	-
9.3.8(Charge acceptance test)	-	0	-
9.3.9(Water Consumption Test)	-	0	-
9.3.10(Charge Retention Test)	-	0	-
9.3.11(Light Load Endurance (LLE) Test)	-	0	-
9.3.12(Life Cycle Test)	-	0	-
9.3.13(Overcharge Endurance Test)	-	0	-
9.3.14(Electrolyte Retention Test)	-	0	-
9.3.15(Vibration Resistance Test)	-	0	-
9.3.16(Strength of Terminal Test)	-	0	-
9.3.17(Robustness to Fastening Test)	-	0	-
9.3.18(Test For Dry-Charged Battery)	-	0	-

19 Mar, 2029

-
-

176

IS 16333 : Part 3 (2022)

Mobile phone handsets: Part 3 Indian language support for mobile phone handsets - Specific requirements(Second Revision)

Indian Language Support for Mobile Phones Handsets

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Inputting of text)	-	7000	5% Discount for BIS
5.2(Message Readability)	-	7000	5% Discount for BIS
6(Marking)	-	1000	5% Discount for BIS
5.1(Inputting of text)	-	0	-
5.2(Message Readability)	-	0	-
6(Marking)	-	0	-
5.1(Inputting of text)	-	0	-
5.2(Message Readability)	-	0	-
6(Marking)	-	0	-

19 Mar, 2029

-
-

177

IS/IEC 61730 : PART 1 (2004)

Photovoltaic (PV) Module Safety Qualification Part 1 Requirements for Construction

468500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Application classes)	-	0	-
4(Construction requirements)	-	0	-
5(Polymeric materials)	-	250000	-
6(Internal wiring and current-carrying parts)	-	7500	-
7(Connections)	-	75000	-
8(Bonding and grounding)	-	7500	-
9(Creepage and clearance distances)	-	17500	-
10(Field wiring compartments with covers)	-	110000	-
11(Marking)	-	1000	-
12()	-	0	-
3(Application classes)	-	0	5% discount for BIS
4(Construction requirements)	-	0	5% discount for BIS
5(Polymeric materials)	-	250000	5% discount for BIS
6(Internal wiring and current-carrying parts)	-	7500	5% discount for BIS
7(Connections)	-	75000	5% discount for BIS
8(Bonding and grounding)	-	7500	5% discount for BIS
9(Creepage and clearance distances)	-	17500	5% discount for BIS
10(Field wiring compartments with covers)	-	110000	5% discount for BIS
11(Marking)	-	1000	5% discount for BIS
12()	-	0	5% discount for BIS

19 Mar, 2029

-
-

178

IS/IEC 60669 : Part 2 : Sec 1 (2008)

Switches for Household and Similar Fixed Electrical Installations Part 2 Particular Requirements Section 1 Electronic Switches

60000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Classification)	-	0	-
8(Marking)	-	0	-
9(Checking Dimension)	-	500	-
10(Protection against Access to Live Parts)	-	1000	-
11(Provision for earthing)	-	1000	-
12(Terminals)	-	1000	-
13(Constructional Requirements)	-	2500	-
14(Mechanism)	-	2500	-
15(Resistance to ageing, protection provided by enclosures of switches, and resistance to humidity )	-	5000	-
16(Insulation resistance & Electric Strength)	-	2500	-
17(Temperature Rise)	-	2500	-
18(Making and breaking capacity)	-	5000	-
19(Normal Operation)	-	1500	-
20(Mechanical Strength)	-	1500	-
21(Resistance to heat)	-	2000	-
22(Screws, current -carrying parts and connections)	-	1000	-
23(Creepage distances, clearances and distance through sealing compound)	-	1000	-
24(Resistance of insulating material to abnormal heat to fire and to tracking)	-	2500	-
25(Resistance to rusting)	-	2500	-
26(EMC Requirements)	-	22500	-
101(Abnormal Conditions)	-	2000	-
102(Components)	-	0	-

19 Mar, 2029

-
Exclusion: (Cl.26.1.5 to 26.1.7) EMI/EMC tests (Radiated electromagnetic field test, Radio frequency voltage test, power frequency magnetic field test)

179

IS 15750 (2006)

Household frost - Free refrigerating appliances - Refrigerators cooled by internal forced air circulation - Characteristics and test methods - Specification

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.3(General Definitions)	-	0	-
4(Material Design & manufacturing)	-	25000	-
5(Required characteristics)	-	0	-
6(Determination of linear dimensions, volumes and areas)	-	10000	-
7(General test condition)	-	20000	-
8(Testing the air tightness of Door or Lid Seal)	-	20000	-
9(Testing the opening force of door(s) or lid(s))	-	20000	-
10(Testing the durability of hinges and handles of door(s) and lid(s))	-	20000	-
11(Testing the mechanical strength of shelves and similar components)	-	22500	-
12(Testing the storage temperatures)	-	45000	-
13(Water vapour condensation test )	-	25000	-
14(Energy consumption test)	-	35000	-
15(Temperature Rise Test)	-	22500	-
16(Pull down test)	-	15000	-
17(Ice making test)	-	30000	-
18(Test for absence of odour & taste)	-	15000	-
19(High voltage test)	-	12500	-
20(Insulation resistance test)	-	12500	-
22(Requirement of ECO mark)	-	0	-
23(Designation)	-	0	-
24(Marking)	-	0	-

19 Mar, 2029

-
Included w.e.f 07.12.2020

180

IS 10322 : Part 5 : Sec 9 (2017)

Luminaires: Part 5 particular requirements: Sec 9 rope lights

70000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
21.4(General Test Requireements)	-	0	-
21.5(Classification of Luminaires')	-	0	-
21.6(Marking)	-	500	5% discount for BIS
21.7(Construction)	-	1500	5% discount for BIS
21.8(Creepage Distance and Clearances)	-	1000	5% discount for BIS
21.9(Provision for earthing)	-	1000	5% discount for BIS
21.10(Terminals)	-	1000	5% discount for BIS
21.11(External & Internal Wiring)	-	2000	5% discount for BIS
21.12(Protection against electric shock)	-	1000	5% discount for BIS
21.13(Endurance Tests and Thermal Tests)	-	25000	5% discount for BIS
21.14(Resistance to Dust & Moisture)	-	18000	5% discount for BIS
21.15(Insulation Resistance and Electric Strength)	-	9000	5% discount for BIS
21.16(Resistance to Heat , fire and tracking)	-	10000	5% discount for BIS

19 Mar, 2029

-
Included w.e.f 23.06.2020

Bureau of Indian Standards

The National Standards Body of India

Bharat Test House Pvt Ltd 1474 Sonipat Haryana

1474, HSIIDC Rai Industrial Estate, SONIPAT, Sonipat, Haryana, 131029

9310314585 bthrai@bharattesthouse.com

Scope List