BIS - LIMS (Laboratory Information Management System)

Bharat Test House Pvt Ltd 1474 Sonipat Haryana

1474, HSIIDC Rai Industrial Estate, SONIPAT, Sonipat, Haryana, 131029

9310314585 bthrai@bharattesthouse.com

Scope List

Reset

181 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

121

IS 10322 : Part 5 : Sec 5 (2013)

Luminaires: Part 5 particular requirements: Sec 5 floodlights (First Revision)

LED Flood Lights

32500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	0	-
5(Classification of Luminaires')	-	0	-
6.0(Marking)	-	500	5% discount for BIS
7.0(Construction)	-	1000	5% discount for BIS
8.0(Creepage Distance and Clearances)	-	500	5% discount for BIS
9.0(Provision for earthing)	-	500	5% discount for BIS
10.0(Terminals)	-	1000	5% discount for BIS
11.0(External & Internal Wiring)	-	1500	5% discount for BIS
12.0(Protection against electric shock)	-	2000	5% discount for BIS
13.0(Endurance Tests and Thermal Tests)	-	4000	5% discount for BIS
14.0(Resistance to Dust & Moisture)	-	5000	5% discount for BIS
15.0(Insulation Resistance and Electric Strength)	-	5000	5% discount for BIS
16.0(Resistance to Heat , fire and tracking)	-	4000	5% discount for BIS
17.0(Photometric Test)	-	7500	5% discount for BIS

19 Mar, 2029

-
-

122

IS 10322 : Part 5 : Sec 6 (2013)

Luminaires: Part 5 particular requirements: Sec 6 handlamps

LED Hand Lamps

42500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	0	-
5(Classification of Luminaires')	-	0	-
6.0(Marking)	-	500	5% discount for BIS
7.0(Construction)	-	2500	5% discount for BIS
8.0(Creepage Distance and Clearances)	-	120	5% discount for BIS
9.0(Provision for earthing)	-	1200	5% discount for BIS
10.0(Terminals)	-	1500	5% discount for BIS
11.0(External & Internal Wiring)	-	1100	5% discount for BIS
12.0(Protection against electric shock)	-	1000	5% discount for BIS
13.0(Endurance Tests and Thermal Tests)	-	10500	5% discount for BIS
14.0(Resistance to Dust & Moisture)	-	10000	5% discount for BIS
15.0(Insulation Resistance and Electric Strength)	-	8000	5% discount for BIS
16.0(Resistance to Heat , fire and tracking)	-	5000	5% discount for BIS

19 Mar, 2029

-
Included w.e.f. 10-10-2017

123

IS 16077 (2013)

Thin - Film terrestrial photovoltaic (PV) modules - Design qualification and type approval

THIN-FILM TERRESTRIAL PHOTOVOLTAIC (PV) MODULES

805000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Marking)	-	0	N/A
10.1(Visual inspection)	-	7500	5% discount for BIS
10.2(Maximum power determination)	-	12500	5% discount for BIS
10.3(Insulation test)	-	15000	5% discount for BIS
10.4(Measurement of temperature coefficients)	-	55000	5% discount for BIS
10.5(Measurement of NOCT)	-	55000	5% discount for BIS
10.6(Performance at STC and NOCT)	-	60000	5% discount for BIS
10.7(Performance at low irradiance)	-	60000	5% discount for BIS
10.8(Outdoor exposure test)	-	32500	5% discount for BIS
10.9(Hot-spot endurance test)	-	85000	5% discount for BIS
10.10(UV preconditioning)	-	47500	5% discount for BIS
10.11(Thermal cycling test)	-	65000	5% discount for BIS
10.12(Humidity freeze test)	-	62500	5% discount for BIS
10.13(Damp heat test)	-	45000	5% discount for BIS
10.14(Robustness of termination test)	-	20000	5% discount for BIS
10.15(Wet leakage current test)	-	25000	5% discount for BIS
10.16(Mechanical load test)	-	27500	5% discount for BIS
10.17(Hail test)	-	60000	5% discount for BIS
10.18(Bypass diode thermal' test)	-	27500	5% discount for BIS
10.19(Light Soaking)	-	42500	5% discount for BIS

19 Mar, 2029

-
-

124

IS 302 : Part 2 : Sec 25 (2014)

Safety of household and similar electrical appliances: Part 2 Particular requirements: Section 25 Microwave ovens

Microwave ovens

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	250	5% discount for BIS
7(Marking and instructions)	-	250	5% discount for BIS
8(Protection against live parts)	-	250	5% discount for BIS
10(POWER INPUT AND CURRENT)	-	500	5% discount for BIS
11(HEATING)	-	500	5% discount for BIS
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	500	5% discount for BIS
14(IMPULSE VOLTAGE TEST)	-	500	5% discount for BIS
15(HUMIDITY TREATMENT TEST)	-	2000	5% discount for BIS
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	500	5% discount for BIS
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	1000	5% discount for BIS
18(ENDURANCE)	-	5500	5% discount for BIS
19(ABNORMAL OPERATION)	-	12500	5% discount for BIS
20(STABILITY AND MECHANICAL HAZARDS)	-	550	5% discount for BIS
21(MECHANICAL STRENGTH)	-	1000	5% discount for BIS
22(CONSTRUCTION)	-	2000	5% discount for BIS
23(INTERNAL WIRING)	-	1000	5% discount for BIS
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	500	5% discount for BIS
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	500	5% discount for BIS
27(PROVISION FOR EARTHING)	-	200	5% discount for BIS
28(SCREWS AND CONNECTIONS)	-	500	5% discount for BIS
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	500	5% discount for BIS
30(RESISTANCE TO HEAT AND FIRE)	-	1250	5% discount for BIS
31(RESISTANCE TO RUSTING)	-	1250	5% discount for BIS
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	1500	5% discount for BIS

19 Mar, 2029

-
Exclusion: 22.16 (Special Test), 22.32 (Test on ceramic materials), 22.46 (Software), 22.106 (Inter locks), 24 (COMPONENTS), 31 (RESISTANCE TO RUSTING)

125

IS 302 : Part 2 : Sec 26 (2014)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 26 clocks (First Revision)

Digital Clocks

22000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	250	5% discount for BIS
7(Marking and instructions)	-	250	5% discount for BIS
8(Protection against live parts)	-	500	5% discount for BIS
10(POWER INPUT AND CURRENT)	-	500	5% discount for BIS
11(HEATING)	-	750	5% discount for BIS
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	500	5% discount for BIS
14(TRANSIENT OVERVOLTAGES)	-	750	5% discount for BIS
15(MOISTURE RESISTANCE)	-	1750	5% discount for BIS
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	500	5% discount for BIS
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	500	5% discount for BIS
19(ABNORMAL OPERATION)	-	4000	5% discount for BIS
20(STABILITY AND MECHANICAL HAZARDS)	-	500	5% discount for BIS
21(MECHANICAL STRENGTH)	-	500	5% discount for BIS
22(CONSTRUCTION)	-	500	5% discount for BIS
23(INTERNAL WIRING)	-	500	5% discount for BIS
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	750	5% discount for BIS
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	750	5% discount for BIS
27(PROVISION FOR EARTHING)	-	750	5% discount for BIS
28(SCREWS AND CONNECTIONS)	-	750	5% discount for BIS
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	750	5% discount for BIS
30(RESISTANCE TO HEAT AND FIRE)	-	2250	5% discount for BIS
31(RESISTANCE TO RUSTING)	-	1500	5% discount for BIS
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	1500	5% discount for BIS

19 Mar, 2029

-
Exclusion: 22.16 Special Test(Automatic cord reel), 22.32 Special Test(on ceramic materials), 22.46 Special Test(Software), 24 (COMPONENTS)

126

IS 16270 (2014)

Secondary cells and batteries for solar photovoltaic application - General requirements and methods of test

Secondary cells & batteries of lead-acid and nickel

601000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Condition of use)	-	0	-
5.1(Mechanical Endurance)	-	0	-
5.2(Charge efficiency)	-	0	-
5.3(Deep discharge protection)	-	0	-
5.4(Marking)	-	1000	5% discount for BIS
5.5(Dafety)	-	0	-
5.6(Documentation)	-	0	-
6(Finctional Characteristics)	-	0	-
7(General test conditions)	-	0	-
8.1(Capacity test)	-	75000	5% discount for BIS
8.2(Endurance test)	-	150000	5% discount for BIS
8.3(Charge retention test)	-	75000	5% discount for BIS
8.4(Cycle endurance in Photovoltaic application)	-	150000	5% discount for BIS
8.5(Sulphation Test)	-	50000	5% discount for BIS
8.6(Water loss test)	-	50000	5% discount for BIS
8.7(Non spillability)	-	50000	5% discount for BIS

19 Mar, 2029

-
-

127

IS 16221 : Part 2 (2015)

Safety of power converters for use in photovoltaic power systems: Part 2 particular requirements for inverters

Power converters for use in photovoltaic power systems

158500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	150000	5% discount for BIS
5(Marking and documentation)	-	4000	5% discount for BIS
6(Environmental requirements and conditions)	-	0	-
7(Protection against electric shock and energy hazards)	-	2000	5% discount for BIS
8(Protection against Mechanical Hazards)	-	0	-
9(Protection against Fire Hazards)	-	2000	5% discount for BIS
11(Protection against Liquid Hazards)	-	0	-
12(Protection against Chemical Hazards)	-	0	-
13(Physical Requirements)	-	500	5% discount for BIS
14(Components)	-	0	-
Clause No. 4.3(Thermal testing)	-	15000	5% discount for BIS
Clause No. 4.4(Testing in single fault condition)	-	30000	5% discount for BIS
4.5(Humidity preconditioning)	-	10000	5% discount for BIS
4.6(Backfeed voltage protection)	-	10000	5% discount for BIS
4.7(Electrical rating tests)	-	20000	5% discount for BIS
4.8(Additional tests for grid interactive inverters)	-	65000	5% discount for BIS
10(Protection against Sonic Pressure Hazards)	-	0	-

19 Mar, 2029

-
Excluding: Cl.10.2-Protection against sonic Pressure hazards Cl.13.6.4-UV resistance Cl.14 –Component Cl.15- Software and firmware performing safety function

128

IS 16444 (2015)

AC static direct connected watthour smart meter class 1 and 2 - Specification

A.C. Static Direct Connected Watthour Smart Meter Class

229500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
cl. 7.1 a) of IS 13779(MARKING OF METERS : Name Plate )	-	0	Charges Covered in Marking of smart meters Name plate Cl. 6.8
cl. 7.1 b) of IS 13779(MARKING OF METERS : Name Plate )	-	0	Charges Covered in Marking of smart meters Name plate Cl. 6.8
cl. 7.1 c) of IS 13779(MARKING OF METERS : Name Plate )	-	0	Charges Covered in Marking of smart meters Name plate Cl. 6.8
cl. 7.1 d) of IS 13779(MARKING OF METERS : Name Plate )	-	0	Charges Covered in Marking of smart meters Name plate Cl. 6.8
cl. 7.1 e) of of IS 13779(MARKING OF METERS : Name Plate )	-	0	Charges Covered in Marking of smart meters Name plate Cl. 6.8
cl. 7.1 f) of IS 13779(MARKING OF METERS : Name Plate )	-	0	Charges Covered in Marking of smart meters Name plate Cl. 6.8
cl. 7.1 g) of IS 13779(MARKING OF METERS : Name Plate )	-	0	Charges Covered in Marking of smart meters Name plate Cl. 6.8
cl. 7.1 h) of IS 13779(MARKING OF METERS : Name Plate )	-	0	Charges Covered in Marking of smart meters Name plate Cl. 6.8
cl. 7.1 j) of IS 13779(MARKING OF METERS : Name Plate )	-	0	Charges Covered in Marking of smart meters Name plate Cl. 6.8
cl. 7.1 k) of IS 13779(MARKING OF METERS : Name Plate )	-	0	Charges Covered in Marking of smart meters Name plate Cl. 6.8
cl. 7.1 m) of IS 13779(MARKING OF METERS : Name Plate )	-	0	Charges Covered in Marking of smart meters Name plate Cl. 6.8
cl. 7.1 p) of IS 13779(MARKING OF METERS : Name Plate )	-	0	Charges Covered in Marking of smart meters Name plate Cl. 6.8
cl. 7.1 n) of IS 13779(MARKING OF METERS : Name Plate )	-	0	Charges Covered in Marking of smart meters Name plate Cl. 6.8
4.4.2.1 of IS 15844(Voltage range)	-	200	5% discount for BIS
4.4.2.2 of IS 15844( Specified operating range )	-	200	5% discount for BIS
4.4.2.3 of IS 15844(Extended operating range)	-	200	5% discount for BIS
4.4.2.4 of IS 15844( Limit range of operation)	-	200	5% discount for BIS
4.4.2.5 of IS 15844(Withstand range)	-	200	5% discount for BIS
4.4.2.6 of IS 15844(Abnormal voltage conditions)	-	1500	5% discount for BIS
4.4.2.7 of IS 15844(Voltage dips and short interruptions)	-	2500	5% discount for BIS
4.4.3 of IS 15844(Influence of Short-Time Overcurrents)	-	2500	5% discount for BIS
6.8(BIS Standard Mark)	-	0	Charges Covered in Marking of smart meters Name plate Cl. 6.8
6.8(Marking of smart meters Name plate)	-	500	5% discount for BIS
6.3(Clearance and creepage distances)	-	200	5% discount for BIS
11.0(Smart meter functional requirements)	-	5000	5% discount for BIS
10.3(Test of Display)	-	200	5% discount for BIS
8.0(Data Exchange for Electricity Meter Reading, Tariff and Load Control Companion Specification (Verification up to two Port))	-	42000	5% discount for BIS
7.2, 10.4(Performance Requirements for Load Switching (UC1))	-	8000	5% discount for BIS
7.2, 10.4(Dielectric strength (G-8))	-	4000	5% discount for BIS
7.2, 10.4(Minimum switched current (G-7))	-	2500	5% discount for BIS
7.2, 10.4(Short circuit current carrying capacity (G-6))	-	17000	5% discount for BIS
7.2, 10.4(Fault current making capacity (G-5))	-	17000	5% discount for BIS
7.2, 10.4(Line to load voltage surge withstand (G-4))	-	6000	5% discount for BIS
7.2, 10.4(Electrical endurance (G-3))	-	12000	5% discount for BIS
7.2, 10.4(Normal operation (G-2))	-	1500	5% discount for BIS
6.5(Test of resistance to heat and fire)	-	2000	5% discount for BIS
Note 1c of Table 1(Remote disconnect/connect)	-	1000	5% discount for BIS
Note 1b of Table 1(Access and data read test)	-	800	5% discount for BIS
Note 1a of Table 1(Accuracy of the meter at pre-defined points)	-	200	5% discount for BIS
6.5(Protection against penetration of dust and water)	-	4000	5% discount for BIS
6.5(Spring Hammer test)	-	200	5% discount for BIS
6.5(Shock test)	-	3500	5% discount for BIS
6.5(Vibration test)	-	6000	5% discount for BIS
6.9(Damp heat cyclic test)	-	5800	5% discount for BIS
6.9(Cold test)	-	3000	5% discount for BIS
6.9(Dry heat test)	-	1000	5% discount for BIS
6.11(Surge Immunity test)	-	4000	5% discount for BIS
6.11(Test of immunity to electrostatic discharge)	-	4000	5% discount for BIS
6.11(Fast transient burst test)	-	6000	5% discount for BIS
6.11(Radio interference measurement)	-	10000	5% discount for BIS
6.10.7(Test of influence of immunity to earth fault)	-	2000	5% discount for BIS
6.10.5(Test of influence of heating)	-	1500	5% discount for BIS
6.10.4(Test of influence of self-heating)	-	1000	5% discount for BIS
6.10.1(Test of power consumption)	-	600	5% discount for BIS
6.12(Operation of Accessories)	-	500	5% discount for BIS
6.12(Abnormal Magnetic Induction of External Origin 10mT)	-	1200	5% discount for BIS
6.12(Magnetic induction of External Origin 0.5mT)	-	1200	5% discount for BIS
6.12(Continuous Magnetic Induction of External Origin 0.2 Tesla)	-	1200	5% discount for BIS
6.12(Continuous Magnetic Induction of External Origin 67 milli Tesla)	-	1200	5% discount for BIS
6.12(DC & Even Harmonics in the ac current circuit)	-	1200	5% discount for BIS
6.12(Voltage Unbalanced)	-	400	5% discount for BIS
6.12(Reversed Phase Sequence)	-	400	5% discount for BIS
6.12(Waveform 10% of 3rd Harmonics)	-	1000	5% discount for BIS
6.12(Frequency Variation)	-	400	5% discount for BIS
6.12(Voltage Variation)	-	400	5% discount for BIS
6.12(Test of influence quantities)	-	0	Test wise charges as per added
6.12(Test of repeatability of error )	-	3000	5% discount for BIS
6.12(Test of ambient temperature influence)	-	2000	5% discount for BIS
6.12(Test of no-load condition)	-	500	5% discount for BIS
6.12(Test of starting condition)	-	400	5% discount for BIS
6.12(Test of meter constant)	-	1000	5% discount for BIS
6.12(Test on limits of error due to variation of the current)	-	1800	5% discount for BIS
6.10.6(Insulation resistance test)	-	500	5% discount for BIS
6.10.6(ac high voltage test)	-	500	5% discount for BIS
6.10.6(Impulse voltage test)	-	3000	5% discount for BIS
6.8.1(Additional information)	-	0	Charges Covered in Marking of smart meters Name plate Cl. 6.8
6.8(Connection diagrams and terminal marking)	-	0	Charges Covered in Marking of smart meters Name plate Cl. 6.8
6.7(Output device)	-	1500	5% discount for BIS
6.6(Display of measured values)	-	200	5% discount for BIS
6.2.2(Insulating encased meter)	-	0	Charges Covered in General and constructional requirements Cl. 6.2
6.2.2(Terminal Cover(s))	-	0	Charges Covered in General and constructional requirements Cl. 6.2
6.2.1(Heat Deflection Test)	-	0	Charges Covered in General and constructional requirements Cl. 6.2
6.2.1(Terminals, terminal block and protective earth ter-minal)	-	0	Charges Covered in General and constructional requirements Cl. 6.2
6.2(Communication module Load switch)	-	0	Charges Covered in General and constructional requirements Cl. 6.2
6.2(Window)	-	0	Charges Covered in General and constructional requirements Cl. 6.2
6.2(Meter case)	-	0	Charges Covered in General and constructional requirements Cl. 6.2
6.2(General and constructional requirements)	-	2000	5% discount for BIS
Table 1 (Note 1)(Schedule of type tests)	-	0	Charges Covered in Note 1a, 1b, 1c of Table 1
Table 1 (Note 1)(Schedule of type tests)	-	0	Charges Covered in Note 1a, 1b, 1c of Table 1
10.5(Test for Data Exchange Protocol)	-	0	Charges Covered in Data exchange protocol Cl. 8.0
10.6.2(Test for Smart meter communicability )	-	10000	5% discount for BIS
12.9.3 of IS 13779(Test for Immunity to EIectromagnetic HF Fields)	-	14000	5% discount for BIS

19 Mar, 2029

-
Exclusion: 10.6.1 (Test of Smart Meter Communicability)

129

IS/IEC 61730 : PART 1 (2016)

Photovoltaic (PV) Module Safety Qualification Part 1 Requirements for Construction ( First Revision )

Photovoltaic (PV) Module

477500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4 IS/IEC 61730-1(Classification, Application and Inteded Use)	-	0	-
5.2(Marking and documentation)	-	0	-
5.3, 5.3.1 IS/IEC 61730-1(Electrical Components and Insualtion)	-	0	-
5.3.2 IS/IEC 61730-1(Internal Wiring)	-	15000	5% discount for BIS
5.3.4 IS/IEC 61730-1(Connectors)	-	90000	5% discount for BIS
5.4, 5.4.1 IS/IEC 61730-1(Mechanical and Electromechanical connections)	-	150000	5% discount for BIS
5.5, 5.5.1 IS/IEC 61730-1(Materials)	-	0	5% discount for BIS
5.5.2 IS/IEC 61730-1(Polymeric Materials)	-	175000	5% discount for BIS
5.6, 5.6.1 IS/IEC 61730-1(Protection Agianst Electric Shock)	-	27500	5% discount for BIS
5.6.3.4(Clearances and creepage distances)	-	20000	5% discount for BIS
5.3.5 IS/IEC 61730-1(Junction Box for PV modules)	-	0	-
5.3.6 IS/IEC 61730-1(Front sheet and back Sheet)	-	0	-
5.3.7 IS/IEC 61730-1(Insulation Barrier)	-	0	-
5.3.8 IS/IEC 61730-1(Electrical Connections)	-	0	-
5.3.9 IS/IEC 61730-1(Encapsulants)	-	0	-
5.3.10 IS/IEC 61730-1(Bypass Diodes)	-	0	-
5.4.2 IS/IEC 61730-1(Screw Connctions)	-	5000	5% discount for BIS
5.4.3 IS/IEC 61730-1(Rivets)	-	0	-
5.4.4 IS/IEC 61730-1(Thread Cutting Screws)	-	0	-
5.4.5 IS/IEC 61730-1(Form/Press/Tight/Fit)	-	0	-
5.4.6 IS/IEC 61730-1(Connections by adhesives)	-	0	-
5.4.7 IS/IEC 61730-1(Other Connections)	-	0	-
5.5.2.3.2 IS/IEC 61730-1(Endurance to Electrical Stress)	-	175000	5% discount for BIS
5.5.2.3.3 IS/IEC 61730-1(Endurance to thermal stress-RTE (RTI) or TI)	-	175000	5% discount for BIS
5.5.2.3.4 IS/IEC 61730-1(Polymeric Insulating materials used as external Parts)	-	175000	5% discount for BIS
5.5.2.3.5 IS/IEC 61730-1(Polymeric Insulating Parts supporting live Parts)	-	175000	5% discount for BIS
5.5.2.4 IS/IEC 61730-1(Polymeric Meterial used for Mechanical functions)	-	175000	5% discount for BIS
5.5.3, 5.5.3.1 IS/IEC 61730-1(Metallic materials)	-	0	-
5.5.3.2 IS/IEC 61730-1(Current Carrying Parts)	-	0	-
5.5.4 IS/IEC 61730-1(Adhesives)	-	0	-
5.6.2 IS/IEC 61730-1(Protection Agianst accessibility to hazardeous live parts)	-	27500	5% discount for BIS
5.6.4 IS/IEC 61730-1(Distance through Insulation)	-	27500	5% discount for BIS

19 Mar, 2029

-
-

130

IS 616 (2017)

Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision)

Audio, Video and Similar Electronic Apparatus

25000 View breakup
Electronic Games (Video)& Video Cameras:Rs.26000/-, Plasma/LCD/LED TVs /video monitors of screen size upto 110” Rs 52500/-, Plasma/LCD/LED TVs of screen size >32” Rs.45000/- , Electronic musical systems Rs..45000/-, Power adaptor Rs.45000/-, Optical Disk Players Rs.26000/-, Amplifiers Rs.26000/- Additional products included w.e.f 23.06.2020: Wireless Headphone and Earphone Rs. 45000/-, Electronic Music system with Input power below 200W:Rs. 45000/-, Television other than Plasma/LCD/LED TVs:Rs.45000/- (5% discount for BIS). ADDITIONAL PRODUCTS INCLUDED FOR PHASE V W.E.F 07-12-2020: Rs. 45,000/- each for: Wireless Microphone Video Camera Webcam(Finished Product) Smart Speakers (with and without display) Bluetooth Speakers

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking and instructions)	-	500	5% discount for BIS
7(Heating under normal operating conditions)	-	1500	5% discount for BIS
8(Constructional requirements with regard to the protection against electric shock)	-	1500	5% discount for BIS
9(Electric shock hazard under normal operating conditions)	-	3000	5% discount for BIS
10(Insulation requirements)	-	2000	5% discount for BIS
11(Fault conditions)	-	5000	5% discount for BIS
12(Mechanical strength)	-	1500	5% discount for BIS
13(CLEARANCES and CREEPAGE DISTANCES)	-	1000	5% discount for BIS
14(Components)	-	0	Nil
15(TERMINALS)	-	1500	5% discount for BIS
16(External flexible cords)	-	1500	5% discount for BIS
17(Electrical connections and mechanical fixings)	-	2000	5% discount for BIS
19(Stability and mechanical hazards)	-	1500	5% discount for BIS
20(Resistance to fire)	-	2000	5% discount for BIS
4(General test conditions)	-	500	5% discount for BIS

19 Mar, 2029

-
REVISED VERSION OF IS 616:2017 Included w.e.f. 21.06.2018 Excluding tests (cl.6 ) Hazardous radiation, (cl.8.16/Annex H) Requirements for insulated winding wires for use without additional interleaved insulation, (cl.8.17) Endurance test for wound components with insulated winding wires without additional interleaved insulation, (cl. 13.5.2) Printed Circuit Boards, (cl.14) Components, (cl. 15.1) Plugs and Sockets, (cl.18) Mechanical strength of picture tubes and protection against the effects of implosion

131

IS 9873 : Part 2 (2017)

Safety of toys: Part 2 flammability (Third Revision)

3000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.2-5.2(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy-Duration of the flame after the removal of the test flame)	-	300	5% discount for BIS
4.2.2(a)-5.2(Toys to be worn on the head-Test relating to Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy- if ignition occurs, the maximum burnt length of hair, pile, or material that behaves in a similar manner when the initial length was 150 mm or more)	-	300	5% discount for BIS
4.2.2(b)-5.2(Toys to be worn on the head-Test relating to Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy- if ignition occurs, the maximum burnt length of hair, pile, or material that behaves in a similar manner when the initial length was less than 150 mm)	-	400	5% discount for BIS
4.2.3-5.3(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude less than 50 mm and more than 5 mm from the surface of the toy-Duration of the flame after the removal of the test flame)	-	200	5% discount for BIS
4.2.4-5.3(Toys to be worn on the head-Full or partial moulded head masks-Duration of the flame after the removal of the test flame)	-	100	5% discount for BIS
4.2.3-5.3(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude less than 50 mm and more than 5 mm from the surface of the toy- maximum distance between the upper edge of the burnt area and the point of application of the test flame)	-	100	5% discount for BIS
4.2.4-5.3(Toys to be worn on the head-Full or partial moulded head masks-maximum distance between the upper edge of the burnt area and the point of application of the test flame)	-	100	5% discount for BIS
4.2.5-5.4(Toys to be worn on the head-Flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks)-rate of spread of flame)	-	300	5% discount for BIS
4.2.5-5.4(Toys to be worn on the head-Flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks)-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	300	5% discount for BIS
4.3-5.4(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play-rate of spread of flame)	-	200	5% discount for BIS
4.3-5.4(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child)	-	200	5% discount for BIS
4.3(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play)	-	0	NIL.
4.4-5.4(Toys intended to be entered by a child-rate of spread of flame)	-	200	5% discount for BIS
4.4-5.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child)	-	1000	5% discount for BIS
4.4-5.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	1000	5% discount for BIS
4.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	0	NIL.
4.5-5.5(Soft-filled toys-rate of spread of flame )	-	250	5% discount for BIS
4.5-5.5(Soft-filled toys-Test for soft-filled toys )	-	250	5% discount for BIS

19 Mar, 2029

-
-

132

IS 16046 : Part 1 (2018)

Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes ” Safety Requirements for Portable Sealed Secondary Cells and for Batteries Made from Them for Use in Portable Applications Part 1 Nickel Systems ( Second Revision )

Laptop, Mobile, CCTV Cameras, Scanner, Printers, Etc

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Parameter Measurement Tolerances)	-	0	-
5(General Safety Considerations)	-	250	5% discount for BIS
5.1(General)	-	0	-
5.2(Insulation and Wiring)	-	500	5% discount for BIS
5.3(Venting)	-	0	-
5.4(Temperature, Voltage and Current Management)	-	0	-
5.5(Terminal Contacts)	-	0	-
5.6(Assembly of Cells into batteries)	-	0	-
5.7(Quality Plan)	-	0	-
6(Tyoe Test amd Sample Size)	-	0	-
7(Specific requirements and tests)	-	0	-
7.1(Charging procedure for test purposes)	-	7750	5% discount for BIS
7.2(Intended Use)	-	15500	5% discount for BIS
7.3(Reasonably foreseeable misuse)	-	15250	5% discount for BIS
8(Information for safety)	-	250	5% discount for BIS
8.1(General)	-	0	-
8.2(Small Cell and battery safety information)	-	0	-
9(Marking)	-	250	5% discount for BIS
9.1(Cell Marking)	-	0	-
9.2(Battery Marking)	-	0	-
9.3(Caution for ingestion of small cells and batteries)	-	0	-
9.4(Other information)	-	0	-
10(Packaging)	-	250	5% discount for BIS

19 Mar, 2029

-
-

133

IS 14286 : Part 1 : Sec 2 (2019)

Terrestrial photovoltaic (PV) modules - Design qualification and type approval: Part 1 test requirements: Sec 2 special requirements for testing of thin - Film cadmium telluride (CdTe) based photovoltaic (Pv) modules (Second Revision)

Terrestrial Photovoltaic (PV) Modules

750000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11.19(Stabilization (MQT 19))	-	42500	5% discount for BIS
11.18(Bypass diode thermal test (MQT 18))	-	27500	5% discount for BIS
11.19 IS 14286( Stabilization )	-	42500	5% discount for BIS
11.18 IS 14286( Bypass diode testing)	-	27500	5% discount for BIS
11.17, Table 3 & 4, IS 14286( Hail test)	-	52500	5% discount for BIS
11.16 IS 14286( Static Mechanical load test)	-	25000	5% discount for BIS
11.15 IS 14286( Wet leakage current test)	-	25000	5% discount for BIS
11.14, Table 1 IS 14286( Robutness of terminations test - Retention of Junction Box on Mounting Surface - Test of Cord Anchorage)	-	20000	5% discount for BIS
11.13 IS 14286(Damp heat test)	-	42500	5% discount for BIS
11.12 IS 14286( Humidity-freeze test)	-	57500	5% discount for BIS
11.11 IS 14286( Thermal cycling test)	-	50000	5% discount for BIS
11.10 IS 14286( UV Preconditioning test )	-	37500	5% discount for BIS
11.9 IS 14286( Hot-spot endurance test)	-	80000	5% discount for BIS
11.8 IS 14286( Outdoor exposure Test)	-	32500	5% discount for BIS
11.7 IS 14286( Performance at low irradiance)	-	57500	5% discount for BIS
11.6 IS 14286( Performance at STC and NMOT)	-	60000	5% discount for BIS
11.5 IS 14286( Measurement of nominal module operating temperature (NMOT))	-	55000	5% discount for BIS
11.4 IS 14286( Measurement of temperature coefficients)	-	55000	5% discount for BIS
11.3 IS 14286( Insulation Test)	-	15000	5% discount for BIS
11.2 IS 14286( Maximum power determination)	-	7500	5% discount for BIS
11.1 IS 14286( Visual inspection)	-	7500	5% discount for BIS
5 IS 14286( Marking and Documentation)	-	0	5% discount for BIS

19 Mar, 2029

-
-

134

IS 5950 (1984)

Specification for shot firing cables (For Use Other Than In Shafts) (First Revision)

Shot firing cables

9500 View breakup
Included w.e.f 13.05.2020

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Conductor : Material -IS : 8130-2013)	-	0	-
4.1(Insulation : Material -IS : 5831-1984)	-	0	-
5.1(Sheath : materail IS : 5831-1984)	-	0	-
6.1(Conductor : Construction IS : 8130-2013)	-	0	-
7.1(Insulation : Application )	-	0	-
7.2(Thickness of Insulation - average )	-	750	5% discount for BIS
7.2(Thickness of Insulation - Min. )	-	750	5% discount for BIS
7.3(Colour of Insulation)	-	0	-
8.1, 9.1 (c)(Nominal radial thickness of sheath)	-	750	5% discount for BIS
8.2(Thickness of Sheath)	-	750	5% discount for BIS
8.2(Thickness of Sheath - min.)	-	750	5% discount for BIS
8.3(Colour of Sheath)	-	0	-
9.1 a)(Annealing test)	-	600	5% discount for BIS
9.1 b)(Conductor resistance test)	-	750	5% discount for BIS
9.1 d) i)(Insulation : Tensile strength)	-	600	5% discount for BIS
9.1 d) i)(Insulation : elongation at break)	-	600	5% discount for BIS
9.1 d) i)(Sheath : Tensile strength)	-	600	5% discount for BIS
9.1 d) i)(Sheath : elongation at break)	-	600	5% discount for BIS
9.1 d) ii)(Ageing in air oven - Insulation : Tensile strength)	-	650	5% discount for BIS
9.1 d) ii)(Ageing in air oven - Insulation : Tensile strength Variation)	-	650	5% discount for BIS
9.1 d) ii)(Ageing in air oven - Insulation : elongation at break)	-	650	5% discount for BIS
9.1 d) ii)(Ageing in air oven - Insulation : elongation variation at break)	-	650	5% discount for BIS
9.1 d) ii)(Ageing in air oven - Sheath : Tensile strength)	-	650	5% discount for BIS
9.1 d) ii)(Ageing in air oven - Sheath : Tensile strength variation )	-	650	5% discount for BIS
9.1 d) ii)(Ageing in air oven - Sheath : elongation at break)	-	650	5% discount for BIS
9.1 d) ii)(Ageing in air oven - Sheath : elongation variation at break)	-	650	5% discount for BIS
9.1 d) iii )(Loss of mass test - insulation )	-	700	5% discount for BIS
9.1 d) iii )(Loss of mass test - Sheath )	-	700	5% discount for BIS
9.1 d) iv )(Hot deformation - insulation )	-	700	5% discount for BIS
9.1 d) iv )(Hot deformation - sheath )	-	700	5% discount for BIS
9.1 d) v )(Heat shock - insulation )	-	800	5% discount for BIS
9.1 d) v )(Heat shock - Sheath )	-	800	5% discount for BIS
9.1 d) vi )(Shrinkage - insulation )	-	900	5% discount for BIS
9.1 d) vi )(Shrinkage : Crack observed - insulation )	-	900	5% discount for BIS
9.1 d) vi )(Shrinkage - Sheath )	-	900	5% discount for BIS
9.1 d) vi )(Shrinkage: Crack observed - Sheath )	-	900	5% discount for BIS
10.2(Voltage test )	-	750	5% discount for BIS
9.1 f)(Insulation resistance test: Volume resistivity )	-	750	5% discount for BIS
9.1 f)(Insulation resistance test : IR constant)	-	750	5% discount for BIS
10.3(Spark Test)	-	1600	5% discount for BIS
10.4(Flammability Test )	-	1100	5% discount for BIS
11.1(Manufacturer’s Identification)	-	0	-
11.2(Cable Code)	-	0	-
12.1(packing )	-	0	-
12.2(Marking )	-	0	-
12.2.1(Standard marks )	-	0	-

19 Mar, 2029

-
Included w.e.f 13.05.2020

135

IS 9968 : Part 1 (1988)

Specification for elastomer insulatedcables: Part 1 for working voltages up to and including 1100 volts (First Revision)

Elastomer Insulated Cables

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1( Copper Cooduetor)	-	0	-
3.2(Aluminium conductor)	-	0	-
4.1(INSULATION : lnsulation for General Service)	-	0	-
4.2(INSULATION : Heat Resisting insulation)	-	0	-
4.3(INSULATION : Silicone Rubber Insulation)	-	0	-
5.1(TAPE : Proofed Tape)	-	0	-
5.2(TAPE : 2 Polyethyl_ Terephthalate ( PETP ) Tape or Plastic: Tape or Any Other SlIIitable Tape )	-	0	-
5.3(TAPE : Giass Tape)	-	0	-
6.1(FILLERS : )	-	0	-
7.1(BRAID : Textile Braid)	-	0	-
7.2(BRAID : Glass Braid )	-	0	-
8.1(SHEATH : General Service Insulated Cables and Flexible Cords)	-	0	-
8.2(SHEATH :Heat Resisting Insulated Cables)	-	0	-
9.1(PresenRtive Compound)	-	0	-
9.2(Varnish)	-	0	-
10( Conductor )	-	0	-
11(Separator tape)	-	0	-
12.2(Insulation : Thickness of Insufatien)	-	200	5% discount of BIS
12.4(Insulation : Allplication of Insulation)	-	0	-
13(CORE IDENTiFICATlON)	-	0	-
14(Tape)	-	0	-
15(BRAIDING)	-	0	-
16(COMPOUNDING AND VARNISHING)	-	0	-
17(LAYING UP OF CORES)	-	0	-
18( Binder tape)	-	0	-
19.2(Sheath : Thickness of Sheath)	-	200	5% discount of BIS
19.4( Sheath :Colour)	-	0	-
20( Overall diameter)	-	200	5% discount of BIS
21. (a)(Persulphate tests (for copper))	-	500	5% discount of BIS
21. (b)(Annealing Test (for coper))	-	600	5% discount of BIS
21. (c)( Tensile Test (for aluminium))	-	600	5% discount of BIS
21. (d)( Wrapping Test (for aluminium))	-	200	5% discount of BIS
21. (e)(Conductor Resistance )	-	400	5% discount of BIS
21.1( Tensile strength )	-	500	5% discount of BIS
22.1( Elongation)	-	500	5% discount of BIS
21.1(type test : Ageing In air oven)	-	1100	5% discount of BIS
21.1(type test : Ageing in air bomb)	-	1000	5% discount of BIS
21.1(type test : Ageing In oxygen bomb)	-	1000	5% discount of BIS
21.1(type test : Hot set elongation)	-	600	5% discount of BIS
21.1(type test : Tear resistance )	-	1000	5% discount of BIS
22.2(type test :Insulauon resistance High voltage (water immersron ) test)	-	1200	5% discount of BIS
22.2(type test : Flammability test ( applicable to cables finished With SE 3 and SE 4 sheaths only) )	-	1600	5% discount of BIS
21(Water absorption test)	-	600	5% discount of BIS
23(identification)	-	0	-
21.1((f) Oil resistance)	-	1000	5% discount of BIS

19 Mar, 2029

-
-

136

IS 14155 (1994)

Domestic electric clothes washing machines for household use - Specification

Washing Machines

185000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11(Determination of the washing performance standard measurement with a load of clean material and standardized soiling)	-	75000	5% discount for BIS
12(Determination of wear suffered by textile)	-	32500	5% discount for BIS
13(Determination of water retention percentage (Rinsing efficiency))	-	15000	5% discount for BIS
14(Determination of the water extraction efficiency)	-	15000	5% discount for BIS
15(Determination of water and energy consumption)	-	20000	5% discount for BIS
16(Determination of mechanical detergent loss in the sump of washing machine)	-	7000	5% discount for BIS
17(Endurance)	-	20000	5% discount for BIS
18(Finish)	-	500	5% discount for BIS

19 Mar, 2029

-
-

137

IS 14255 (1995)

Aertal bunched cables - For working voltages up to and including 1100 Volts - Specification

Aerial Bunched Cables

11500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Phase/Street Lighting conductor)	-	0	-
4.2(Messenger (Neutral Conductor or Otherwise))	-	0	-
5.1(Insulation)	-	0	-
6.1(Flexibility class)	-	0	-
6.2(Compactness)	-	0	-
6.2(No of strands)	-	0	-
6.2(Surface)	-	0	-
6.3(Protective barrier)	-	0	-
6.4(size of street lighting conductor)	-	0	-
6.5(Size of messenger conductor )	-	0	-
6.6(Joints in messenger conductor )	-	0	-
6.6(Direction of outer layer)	-	0	-
7.1(Insulation)	-	0	-
7.2( Thickness of insulation)	-	0	-
7.3(Tolerance on thickness of insulation )	-	0	-
7.4(Aplication of the insulation )	-	0	-
7.5(Colour of the insulation )	-	0	-
8.1(Core identification)	-	0	-
8.2(Core identification)	-	0	-
8.3(Identification by other means)	-	0	-
9.1(Assembly (Laying up))	-	0	-
9.2(Assembly (Laying up))	-	0	-
9.3(Direction of lay)	-	0	-
10.1 a) i)(Tests on phase/street light conductor: tensile test - Test method IS10810:Part 2)	-	750	5% discount for BIS
10.1 a) ii)(Wrapping test - 10810: Part 3)	-	750	5% discount for BIS
10.1 a) iii)(Resistance test - IS10810: Part 5)	-	750	5% discount for BIS
10.1 b) i)(Test on messenger conductor: Breaking load - IS 10810: Part 2)	-	1200	5% discount for BIS
10.1 b) ii)(Test on messenger conductor: Elongation test - Cl 11.3)	-	1200	5% discount for BIS
10.1 b) iii)(Test on messenger conductor: Resistance test - IS 10810: Part 5)	-	1200	5% discount for BIS
10.1 c) i)(Physical tests for XLPE Insulation: Tensile strength - IS 10810: Part 7)	-	1200	5% discount for BIS
10.1 c) i)(Physical tests for XLPE Insulation: elongation at break - IS 10810: part 7)	-	1200	5% discount for BIS
10.1 c) ii)(Ageing in air oven : Tensile strength variation - IS 10810:Part 11)	-	1250	5% discount for BIS
10.1 c) ii)(Ageing in air oven : Elongation variation- IS 10810: Part 11)	-	1250	5% discount for BIS
10.1 c) iii)(Hot set test: Elongation under load - IS 10810: Part 30)	-	1000	5% discount for BIS
10.1 c) iii)(Hot set test: Permanent elongation (set) after cooling - IS 10810: Part 30)	-	1000	5% discount for BIS
10.1 c) iv)(Shrinkage test : Shrinkage - 10810:Part 12)	-	1100	5% discount for BIS
10.1 c) iv)(Shrinkage test : Crack Observed - 10810:Part 12)	-	1100	5% discount for BIS
10.1 c) v)(Water ahsorption (Gravimetric) - IS 10810: Part 33 )	-	750	5% discount for BIS
10.1 d) i)(Physical test for PE insulation: Tensile strength - IS 10810: Part 7 )	-	1200	5% discount for BIS
10.1 d) i)(Physical test for PE insulation: elongation at break - IS 10810: Part 7)	-	1200	5% discount for BIS
10.1 d) ii)(Melt flow index- IS 10810: Part 23)	-	1200	5% discount for BIS
10.1 d) iv)(Vicat softening point -IS 10810: Part 22)	-	1250	5% discount for BIS
10.1 d) v)(Environmental stress cracking -IS 10810:Part29)	-	1250	5% discount for BIS
10.1 f)(Insulation resistance (Volume resistivity) test a) volume resistivity at 27°C - IS 10810: Part 43)	-	750	5% discount for BIS
10.1 f)(Insulation resistance (Volume resistivity) test b) volume resistivity at 70°C - IS 10810: Part 43)	-	750	5% discount for BIS
10.1 g)(High voltage test - IS10810:Part 45)	-	750	5% discount for BIS
11.4(Bending Test on the Completed Cable ( Optional) )	-	500	5% discount for BIS

19 Mar, 2029

-
-

138

IS 13779 (2020)

ac STATIC WATTHOUR METERS CLASS 1 AND 2-Specefication

AC static watthour meters, Class 1 and 2

120000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1 a)(MARKING OF METERS : Name Plate )	-	500	5% discount for BIS
7.1 b)(MARKING OF METERS : Name Plate )	-	500	5% discount for BIS
7.1 c)(MARKING OF METERS : Name Plate )	-	500	5% discount for BIS
7.1 d)(MARKING OF METERS : Name Plate )	-	500	5% discount for BIS
7.1 e)(MARKING OF METERS : Name Plate )	-	500	5% discount for BIS
7.1 f)(MARKING OF METERS : Name Plate )	-	500	5% discount for BIS
7.1 g)(MARKING OF METERS : Name Plate )	-	500	5% discount for BIS
7.1 h)(MARKING OF METERS : Name Plate )	-	500	5% discount for BIS
7.1 j)(MARKING OF METERS : Name Plate )	-	500	5% discount for BIS
7.1 k)(MARKING OF METERS : Name Plate )	-	500	5% discount for BIS
7.1 m)(MARKING OF METERS : Name Plate )	-	500	5% discount for BIS
7.1 p)(MARKING OF METERS : Name Plate )	-	500	5% discount for BIS
7.1 n)(MARKING OF METERS : Name Plate )	-	500	5% discount for BIS
12.7.6.1( Test of insulation Properties : General test conditions )	-	21000	5% discount for BIS
12.7.6.2(Impulse voltage test)	-	21000	5% discount for BIS
12.7.6.3(ac Voltage test)	-	21000	5% discount for BIS
12.7.6.4(Insulation resistance test)	-	21000	5% discount for BIS
12.10.1 a)(Testof Accuracy Requirements : General Test Conditions )	-	22500	5% discount for BIS
12.10.1 b)(Testof Accuracy Requirements : General Test Conditions )	-	22500	5% discount for BIS
12.10.1 c)(Testof Accuracy Requirements : General Test Conditions )	-	22500	5% discount for BIS
12.10.1 d)(Testof Accuracy Requirements : General Test Conditions )	-	22500	5% discount for BIS
12.10.1 e)(Testof Accuracy Requirements : General Test Conditions )	-	22500	5% discount for BIS
12.10.1 f)(Testof Accuracy Requirements : General Test Conditions )	-	22500	5% discount for BIS
12.16 a)(Limits of Error and Interpretation or Test Results)	-	22500	5% discount for BIS
12.16 b)(Limits of Error and Interpretation or Test Results)	-	22500	5% discount for BIS
12.16 c)(Limits of Error and Interpretation or Test Results)	-	22500	5% discount for BIS
12.15(Test of Meter Constant/Registration)	-	22500	5% discount for BIS
12.14(Test of Starting Conditions)	-	22500	5% discount for BIS
12.13(Test of No-Load Condition)	-	22500	5% discount for BIS
12.12(Test ofAmbient Temperature Influence)	-	22500	5% discount for BIS
12.17(Repeatability of Error Test )	-	22500	5% discount for BIS
12.11(Test of Iniluence Quantities)	-	22500	5% discount for BIS
12.7.1(Test of Power Consumption)	-	21000	5% discount for BIS
12.7.2(Test of Influence of Supply Voltage)	-	21000	5% discount for BIS
12.7.3( Test of Influence of Short-time Overcurrents)	-	21000	5% discount for BIS
12.7.4(Test of Influence of Self-Heating)	-	21000	5% discount for BIS
12.7.5(Test of Influence of Heating)	-	21000	5% discount for BIS
12.8(TestorImmunity to Earth Fault)	-	21000	5% discount for BIS
12.9.2(Test for Immunity to Electrostatic Discharge (ESD))	-	5000	5% discount for BIS
12.9.4(FastTransient BurstTest)	-	7500	5% discount for BIS
12.9.5(Radio Interference Measurement)	-	7500	5% discount for BIS
12.6.1(Dry Heat Test)	-	7500	5% discount for BIS
12.6.2(Cold Test)	-	7500	5% discount for BIS
12.6.3( Damp Heat Cycle Test)	-	7500	5% discount for BIS
12.3.1(Shock Test)	-	10000	5% discount for BIS
12.3.2(Vibration Test)	-	10000	5% discount for BIS
12.3.3( Spring Hammer Test)	-	10000	5% discount for BIS
12.5 a)(Test of Protection Against Penetration of Dust and Water)	-	11000	5% discount for BIS
12.5 b)(Test of Protection Against Penetration of Dust and Water)	-	11000	5% discount for BIS
12.4(Testof Resistance to Heat and Fire )	-	11000	5% discount for BIS
6(General and constructional requirements)	-	11000	5% discount for BIS
6.1(General)	-	0	Qualitative
6.2(Meter case)	-	0	Qualitative
6.3(Window)	-	0	Qualitative
6.4(Terminals, terminal block and protective earth terminal)	-	0	Qualitative
6.5(Terminal Cover(s))	-	0	Qualitative
6.6(Clearance and creepage dis¬t¬ances)	-	500	5% discount for BIS
6.7(Insulating encased meter)	-	0	Qualitative
6.10(Display of measured values)	-	0	Qualitative
6.11(Output device)	-	0	-
7.1.1(BIS Standard Mark)	-	0	Qualitative
7.2(Connection diagrams and terminal marking)	-	0	Qualitative
11.1(Limits of Error and Interpretation or Test Results)	-	0	-
12.9.3(Test for Immunity to EIectromagnetic HF Fields)	-	21000	5% discount for BIS
4(Classification)	-	200	5% discount for BIS
5.1(Standard Reference Voltages)	-	300	5% discount for BIS
5.2(Standard Basic Currents)	-	300	5% discount for BIS
5.3(Rated Maximum Current)	-	300	5% discount for BIS
5.4(Standard Frequency)	-	300	5% discount for BIS
6.1(General)	-	11000	5% discount for BIS
6.2(Meter Case)	-	11000	5% discount for BIS
6.3(Window)	-	11000	5% discount for BIS
6.4(Terminals, terminal block and protective earth terminal)	-	11000	5% discount for BIS
6.5(Terminals covers and Extended Terminal Cover)	-	11000	5% discount for BIS
6.6(Clearance and creepage distances)	-	11000	5% discount for BIS
6.7(Insulating encased meter)	-	11000	5% discount for BIS
6.10(Display of measured values)	-	11000	5% discount for BIS
6.11(Output device)	-	11000	5% discount for BIS
7.1(Name Plate)	-	500	5% discount for BIS
7.2(Connection diagrams and terminal marking)	-	500	5% discount for BIS
8(Climatic Conditions)	-	7500	5% discount for BIS
9.1, 12.7.1(Test of Power Consumption)	-	21000	5% discount for BIS
12.9.2(Test of Immunity to electrostatic discharge)	-	5000	5% discount for BIS
12.9.3(Test of Immunity to electromagnetic HF field)	-	21000	5% discount for BIS
12.9.4(Fast transient burst test)	-	7500	5% discount for BIS
12.9.5, 10.1(Surge Immunity test)	-	6000	5% discount for BIS
12.9.6(Radio Interference Measurement)	-	7500	5% discount for BIS
12.10.1(Test of Accuracy Requirements : General Test Conditions)	-	22500	5% discount for BIS
12.3.1(Shock test)	-	10000	5% discount for BIS
12.3.2(Vibration test)	-	10000	5% discount for BIS
12.3.3(Spring hammer test)	-	10000	5% discount for BIS
12.16 & 11.7(Test of repeatability of error)	-	22500	5% discount for BIS
12.15 & 11.6(Test of meter constant)	-	22500	5% discount for BIS
12.14 & 11.5(Test of starting condition)	-	22500	5% discount for BIS
12.13 & 11.4(Test of no-load condition)	-	22500	5% discount for BIS
12.4(Test of resistance to heat and fire)	-	11000	5% discount for BIS
12.12 & 11.3(Test of ambient temperature influence)	-	22500	5% discount for BIS
12.5(Test of protection against penetration of dust and water)	-	11000	5% discount for BIS
11.2(Test on limits of error due to other influence quantities)	-	22500	5% discount for BIS
12.6.1(Dry heat test)	-	7500	5% discount for BIS
12.6.2(Cold test)	-	7500	5% discount for BIS
12.6.3(Damp heat cyclic test)	-	7500	5% discount for BIS
11.1(Test on limits of error due to variation of current)	-	22500	5% discount for BIS
12.7.2(Test of influence of supply voltage)	-	21000	5% discount for BIS
12.7.2(Voltage interruptions of Vref=100% Interruption time: 1sec Number of interruptions: 3 Restoring time between interruptions: 50msec.)	-	21000	5% discount for BIS
12.7.2(Voltage interruptions of Vref=100% Interruption time: 20msec Number of interruptions: 1)	-	21000	5% discount for BIS
12.7.2(Voltage dip of Vref=50% Dip time: 1 min Number of dips: 1)	-	21000	5% discount for BIS
12.8(Test of immunity to earth/phase fault)	-	21000	5% discount for BIS
12.7.3(Test of influence of short time over currents)	-	21000	5% discount for BIS
12.7.6.4(Insulation resistance test)	-	21000	5% discount for BIS
12.7.4(Test of Influence of self heating)	-	21000	5% discount for BIS
12.7.5(Test of influence of heating)	-	21000	5% discount for BIS
12.7.6.2(Impulse voltage test)	-	21000	5% discount for BIS
12.7.6.2(Impulse voltage tests for circuits and between the circuits)	-	21000	5% discount for BIS
12.7.6.2(Impulse voltage test of electric circuits relative to earth)	-	21000	5% discount for BIS
12.7.6.3(ac high voltage test)	-	21000	5% discount for BIS
12.7.6.4(Insulation resistance test)	-	21000	5% discount for BIS
9.5, 12.7.6.1(Test of insulation Properties : General test conditions)	-	21000	5% discount for BIS

19 Mar, 2029

-
-

139

IS 14697 (2021)

ac STATIC TRANSFORMER OPERATED WATTHOUR METERS CLASS 02 S AND 05 S AND VAR-HOUR METERS CLASS 02 S 05 S AND 10 S - SPECIFICATION First Revision

A.C. Static Transformer Operated Watt hour Meters

122000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1 a)( MARKING OF METERS: Name Plate )	-	500	5% discount for BIS
7.1 b)( MARKING OF METERS: Name Plate )	-	500	5% discount for BIS
7.1 c)( MARKING OF METERS: Name Plate )	-	500	5% discount for BIS
7.1 d)( MARKING OF METERS: Name Plate )	-	500	5% discount for BIS
7.1 e)( MARKING OF METERS: Name Plate )	-	500	5% discount for BIS
7.1 f)( MARKING OF METERS: Name Plate )	-	500	5% discount for BIS
7.1 g)( MARKING OF METERS: Name Plate )	-	500	5% discount for BIS
7.1 h)( MARKING OF METERS: Name Plate )	-	500	5% discount for BIS
7.1 j)( MARKING OF METERS: Name Plate )	-	500	5% discount for BIS
7.1 k)( MARKING OF METERS: Name Plate )	-	500	5% discount for BIS
7.1 n)( MARKING OF METERS: Name Plate )	-	500	5% discount for BIS
7.1 m)( MARKING OF METERS: Name Plate )	-	500	5% discount for BIS
7.1.1(Bis marking)	-	500	5% discount for BIS
7.2(Connection Diagrams and Terminal Marking)	-	500	5% discount for BIS
12.7.6.2(Impulse voltage test )	-	21000	5% discount for BIS
12.7.6.3(ac Voltage test)	-	21000	5% discount for BIS
12.7.6.4(Insulation resistance test)	-	21000	5% discount for BIS
12.9.1 a)( General Test Conditions)	-	0	-
12.9.1 b)( General Test Conditions)	-	0	-
12.9.1 c)( General Test Conditions)	-	0	-
12.9.1 b)( General Test Conditions)	-	0	-
11.1(Limits of Error Due to Variation of the Current)	-	22500	5% discount for BIS
12.15 a)(Limits of error and Interpretation of Test Results )	-	22500	-
12.15 b)(Limits of error and Interpretation of Test Results )	-	22500	-
12.15 c)(Limits of error and Interpretation of Test Results )	-	22500	-
12.14(Test of Meter Constant/ Registration)	-	22500	5% discount for BIS
12.13(Test of Starting Conditions)	-	22500	5% discount for BIS
12.12(Test of No-Load Condition)	-	22500	5% discount for BIS
12.11(Test of Ambient Temperature Influence)	-	22500	5% discount for BIS
12.16(Repeatability of Error Test)	-	22500	5% discount for BIS
12.1(Test of Influence Quantities)	-	22500	5% discount for BIS
12.7.1(Test of Power Consumption )	-	21000	5% discount for BIS
12.7.2(Test of Influence of Supply Voltage)	-	21000	5% discount for BIS
12.7.3(Test of Influence of Short-Time Over Currents)	-	21000	5% discount for BIS
12.7.4(Test of influence of self-heating)	-	21000	5% discount for BIS
12.7.5(Test of Influence of Heating )	-	21000	5% discount for BIS
12.8.2(Test for Immunity to Electrostatic Discharge (ESD))	-	5000	5% discount for BIS
12.8.4(Fast Transient Burst Tes)	-	7500	5% discount for BIS
12.8.5(Radio interference measurement)	-	7500	5% discount for BIS
12.6(Test for Climatic Influences)	-	7500	5% discount for BIS
12.6.1(dry heat test)	-	7500	5% discount for BIS
12.6.2(cold test)	-	7500	5% discount for BIS
12.6.3(Damp Heat Cycle Test )	-	7500	5% discount for BIS
12.3.3(Spring Hammer Test)	-	11000	5% discount for BIS
12.3.1(Shock Test)	-	11000	5% discount for BIS
12.3.2(Vibration Test)	-	11000	5% discount for BIS
12.5 a)(Test of Protection Against Penetration of Dust )	-	11000	5% discount for BIS
12.5 b)( Protection against penetration of water)	-	11000	5% discount for BIS
12.4(Test of Resistance to Heat and Fire)	-	11000	5% discount for BIS
6.11(Output device)	-	0	-
6.10(Display of measured values)	-	0	-
6.7(Insulating encased meter)	-	0	-
6.6(Clearance and creepage distances)	-	500	-
6.5(Terminal Cover(s))	-	0	-
6.3(Window)	-	0	-
6.4(Terminals, terminal block and protective earth terminal)	-	0	-
6.2(Meter case)	-	0	-
6.1(General)	-	0	-
6(General and constructional requirements)	-	0	-
12.17(Test of immunity to earth/phase fault)	-	22500	5% discount for BIS
12.1(Operation of Accessories)	-	0	5% discount for BIS
12.1(Abnormal Magnetic Induction of External Origin 10mT)	-	11000	5% discount for BIS
12.1(Magnetic induction of External Origin 0.5mT)	-	11000	5% discount for BIS
12.1(Continuous Magnetic Induction of External Origin 0.2 Tesla)	-	11000	5% discount for BIS
12.1(Continuous Magnetic Induction of External Origin 67 milli Tesla)	-	11000	5% discount for BIS
12.1(Phase of Auxiliary Voltage)	-	11000	5% discount for BIS
12.1(Auxiliary Voltage)	-	11000	5% discount for BIS
12.1(Voltage Unbalanced)	-	11000	5% discount for BIS
12.1(Reversed Phase Sequence)	-	11000	5% discount for BIS
12.1(Waveform 10% of 3rd Harmonics)	-	11000	5% discount for BIS
12.1(Frequency Variation)	-	11000	5% discount for BIS
12.1(Voltage Variation)	-	11000	5% discount for BIS
7.1(Marking of meters Name plate)	-	500	-
12.8.3(Test for Immunity to Electromagnetic HF Fields )	-	22000	5% discount for BIS
6(General and Constructional requirements)	-	11000	5% discount for BIS
7.1(MARKING OF METERS : Name Plate)	-	500	5% discount for BIS
8(Climatic Conditions)	-	7500	5% discount for BIS
9.1, 12.7.1(Test of Power Consumption)	-	21000	5% discount for BIS
"12.8.2("Test for Immunity to Electrostatic Discharge (ESD) ")	-	5000	5% discount for BIS
"12.8.3(Test for Immunity to Electromagnetic HF Fields)	-	22000	5% discount for BIS
"12.8.4(Fast Transient Burst Test)	-	7500	5% discount for BIS
"12.8.5(Surge Immunity Test)	-	6000	5% discount for BIS
"12.8.6(Radio Interference Measurement)	-	7500	5% discount for BIS
12.9.1(Test of Accuracy Requirements : General Test Conditions)	-	22500	5% discount for BIS
12.3.1(Shock test)	-	11000	5% discount for BIS
12.3.2(Vibration test)	-	11000	5% discount for BIS
12.3.3(Spring Hammer Test)	-	11000	5% discount for BIS
6.1(General)	-	0	-
6.2(Meter Case)	-	0	-
6.3(Window)	-	0	-
12.4(Test of resistance to heat and fire)	-	11000	5% discount for BIS
6.4(Terminals, Terminals Block(s) and Protective Earth Terminal)	-	11000	5% discount for BIS
12.5(Protection against penetration of dust and water)	-	11000	5% discount for BIS
6.5(Terminal Cover(s))	-	0	-
6.6(Clearance and Creepage Distance)	-	500	-
12.6.3(Damp Heat Cycle Test)	-	7500	5% discount for BIS
12.6.2(Cold Test)	-	7500	5% discount for BIS
6.7(Insulating Encased Meter)	-	11000	5% discount for BIS
12.6.1(Dry heat test)	-	7500	5% discount for BIS
6.10(Display of Measured Values)	-	11000	5% discount for BIS
9.6 & 12.17(Immunity to Earth/Phase Fault)	-	22500	5% discount for BIS
6.11(Output Device)	-	11000	5% discount for BIS
9.4 & 12.7.5(Influence of Heating)	-	21000	5% discount for BIS
9.3 & 12.7.4(Influence of Self-heating)	-	21000	5% discount for BIS
9.2.3 & 12.7.3(Short Time Over Current)	-	21000	5% discount for BIS
7.1(Name Plate)	-	500	5% discount for BIS
9.2.2 & 12.7.2(Influence of Supply Voltage)	-	21000	5% discount for BIS
9.1 & 12.7.1(Power Consumption)	-	21000	5% discount for BIS
7.2(Connections, Diagrams and Terminal Marking)	-	500	5% discount for BIS
9.5 & 12.7.6.2(Impulse voltage test)	-	21000	5% discount for BIS
9.5 & 12.7.6.3(a.c. voltage test)	-	21000	5% discount for BIS
12.7.6.4(Insulation resistance test)	-	21000	5% discount for BIS
11.1(Limits of Error Due to Variation of the Current)	-	7500	5% discount for BIS
11.2(Electrical fast transient burst)	-	7500	5% discount for BIS
11.2(‘Abnormal’ ac magnetic induction of external origin 10 mT)	-	7500	5% discount for BIS
11.2(Continuous ‘abnormal’ magnetic induction of external origin)	-	7500	5% discount for BIS
11.2(Electromagnetic HF fields)	-	22000	5% discount for BIS
11.2(Magnetic induction of external origin 0.5 mT)	-	22000	5% discount for BIS
11.2("Phase of Auxiliary supply voltage by 120 degree")	-	7500	5% discount for BIS
11.2(Auxiliary voltage ± 15 percent)	-	7500	5% discount for BIS
11.2(Voltage unbalance)	-	7500	5% discount for BIS
11.2(Reversed phase sequence)	-	7500	5% discount for BIS
11.2(Wave form: 10 percent of third harmonic in the current)	-	7500	5% discount for BIS
11.2(Frequency variation)	-	7500	5% discount for BIS
11.2(Voltage variation)	-	7500	5% discount for BIS
11.3 & 12.11(Limits of Error Due to Ambient Temperature Variation)	-	7500	5% discount for BIS
11.4.1(Initial Start-up of the Meter)	-	7500	5% discount for BIS
11.7 & 12.16(Repeatability of Error Test)	-	7500	5% discount for BIS
11.6 & 12.14(Meter Constant)	-	7500	5% discount for BIS
12.13 & 11.5(Starting Current)	-	7500	5% discount for BIS
11.4.2 & 12.12(Running with No-Load)	-	7500	5% discount for BIS

19 Mar, 2029

-
-

140

IS 2553 : Part 3 (2019)

Safety glass - Specification: Part 3 solar applications

75000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Raw Material)	-	5000	-
4.2 & 6(Dimensions)	-	5000	-
4.2 & 6(Squareness)	-	5000	-
4.2 & 6(Flatness)	-	5000	-
4.2 & 6(Fragmentation)	-	15000	-
4.2 & 6(Resistance to Shock (Ball Drop))	-	24000	-
4.2 & 6(Mechanical Strength)	-	15000	-
4.2 & 6(Hail Strength)	-	25000	-
5.2(Marking)	-	1000	-
4.1(Raw Material)	-	0	-
4.2 & 6(Dimensions)	-	0	-
4.2 & 6(Squareness)	-	0	-
4.2 & 6(Flatness)	-	0	-
4.2 & 6(Fragmentation)	-	0	-
4.2 & 6(Resistance to Shock (Ball Drop))	-	0	-
4.2 & 6(Mechanical Strength)	-	0	-
4.2 & 6(Hail Strength)	-	0	-
5.2(Marking)	-	0	-

19 Mar, 2029

-
-

141

IS 2835 (1987)

Specification for flat transparent sheet glass (Third Revision)

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(CLASSIFICATION)	-	0	-
4.1(Material)	-	750	-
4.1.1(Material)	-	750	-
4.2-Table 1 & Cl 5.1(Thickness )	-	2000	-
4.2-Table 1(Length )	-	2100	-
4.2-Table 1(Width)	-	1800	-
4.3-Table 2-i(Gaseous inclusion)	-	1000	-
4.3-Table 2-ii(Opaque gaseous inclusion)	-	1200	-
4.3-Table 2-iii(Knots, dirts and stones)	-	1200	-
4.3-Table 2-iv & Cl 5.2(Scratches, rubs and crush)	-	1200	-
4.3-Table 2-v & Cl 5.3(Bow)	-	1200	-
4.3-Table 2-vi & Cl 5.4(Reams, Light Strings and lines)	-	1400	-
4.3-Table 2-vii(Waviness)	-	1600	-
4.3-Table 2-viii(Sulphur stains)	-	1800	-
4.3-Table 2-ix(Corner breakage and chip)	-	1600	-
4.3.1-Table 2A-i(Allowable Cluster of Defects for AA Quality at Central area)	-	1800	-
4.3.1-Table 2A-i(Allowable Cluster of Defects for AA Quality at Outer area)	-	1700	-
4.3.1-Table 2A-ii(Allowable Cluster of Defects for A Quality at Central area)	-	1700	-
4.3.1-Table 2A-ii(Allowable Cluster of Defects for A Quality at Outer area)	-	1700	-

19 Mar, 2029

-
-

142

IS 2553 : Part 2 (2019)

Safety glass - Specification: Part 2 for road transport (First Revision)

207000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.1(Light Transmittance)	-	5700	-
5.1.2.1(Resistance to Abrasion)	-	7800	-
5.1.2.3.1(Resistance to Abrasion)	-	1950	-
5.1.2.3.1(Resistance to Abrasion)	-	7800	-
5.1.2.3.2(Resistance to Abrasion)	-	7800	-
5.2.1(Resistance to Temperature Changes)	-	3500	-
5.2.2(a) Resistance to Fire)	-	8000	-
5.2.2(b) Resistance to Fire)	-	8000	-
5.3.1 (Resistance to Radiation)	-	15000	-
5.3.2(Resistance to High Temperature)	-	6500	-
5.3.3.1(Resistance to Humidity)	-	70000	-
5.3.3.2(Resistance to Humidity)	-	70000	-
5.3.3.3(Resistance to Humidity)	-	70000	-
5.4.1(Optical Distortion)	-	6600	-
5.4.2(Secondary image separation test-Vehicle Category M1 and N -Zone A)	-	6100	-
5.4.2(Secondary image separation test-Vehicle Category M1 and N -Zone B)	-	6100	-
5.4.2(Secondary image separation test-Vehicle Category L -Zone Primary area)	-	6100	-
5.4.2(Secondary image separation test-Vehicle Category M2 , M3 and N -central area)	-	6100	-
5.4.2.3(Secondary image separation test)	-	6100	-
5.4.3.1(Head-form Test (Location of crack))	-	11000	-
5.4.3.2(Head-form Test (Interlayer adhesion))	-	11000	-
5.4.3.3.1(Head-form Test)	-	11000	-
5.4.3.3.2(Head-form Test)	-	11000	-
5.4.4(2.260 g Ball)	-	8600	-
5.4.5.1(227 g Ball)	-	8000	-
5.4.5.2(227 g Ball)	-	8000	-
5.4.5.4(227 g Ball)	-	8000	-
5.5.1.1.1(Fragmentation Test)	-	8000	-
5.5.1.1.4(Fragmentation Test)	-	8000	-
5.5.1.1.5(Fragmentation Test)	-	8000	-
5.5.1.1.5.1(Fragmentation Test)	-	8000	-
5.5.1.1.5.2(Fragmentation Test)	-	8000	-
5.5.1.2(227 g ball test)	-	8000	-
5.5.2.1.1(227 g ball test)	-	8000	-
5.5.2.1.2(227 g ball test)	-	8000	-
5.5.2.1.3(227 g ball test)	-	8000	-
5.5.3.1(equirements Applicable only to Double-Glazed Units-Individual components)	-	0	-
5.5.3.2.1( Head-form Test)	-	11000	-
5.5.3.2.2.1( Head-form Test)	-	11000	-
5.5.3.2.2.2( Head-form Test)	-	11000	-
5.5.3.2.2.3( Head-form Test)	-	11000	-
5.5.3.2.3-a( Head-form Test)	-	11000	-
5.5.3.2.3-b-1( Head-form Test)	-	11000	-
5.5.3.2.3-b-3( Head-form Test)	-	11000	-
5.6.1.7( Head-form Test)	-	11000	-
5.6.1.8( Head-form Test-The HIC value )	-	11000	-
5.6.2.4-a(Mechanical Strength Test — 227g Ball)	-	8000	-
5.6.2.4-b(Mechanical Strength Test — 227g Ball)	-	8000	-
5.6.2.5(Mechanical Strength Test — 227g Ball test at –18° ± 2°C)	-	8000	-
5.6.3.3(Flexibility and Fold Test)	-	8000	-
5.6.4.4-a(Weathering)	-	19500	-
5.6.4.4-b(Weathering)	-	19500	-
5.6.5.3-a(Cross-cut)	-	10000	-
5.6.5.3-b-1(Cross-cut)	-	10000	-
5.7.1.1(227 g Ball Test at 20 ± 5°C)	-	8000	-
5.7.2.1(227g Ball Test at –18° ± 2°C)	-	8000	-
5.7.3.1(Flexibility Test and Fold Test)	-	8700	-
5.4.3.1(Head-form Test (Location of crack))	-	11000	-
5.4.3.2(Head-form Test (Interlayer adhesion))	-	11000	-

19 Mar, 2029

-
-

143

IS 2553 : Part 1 (2018)

Safety glass - Specification: Part 1 architectural, building and general uses (Fourth Revision)

148000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Types)	-	5100	-
5.1.1(General)	-	6000	-
5.1.2(Optical Faults-IS 14900)	-	1500	-
5.1.2(Spot Faults of category A/B/C/D -IS 14900)	-	1500	-
5.1.2(Reams, Strings and Lines-IS 14900)	-	1500	-
5.1.2(Linear / Extended Faults -IS 14900)	-	1500	-
5.2.1 (Thickness -IS 17004 & IS 14900)	-	1025	-
5.2.2.1( Dimensions- Width )	-	1000	-
5.2.2.1( Dimensions- Length)	-	1000	-
5.2.2.2( Squareness)	-	1000	-
5.2.3 (Fragmentation Test- IS 17004)	-	10900	-
5.2.4-a( Flatness-Overall bow-IS 17004)	-	1075	-
5.2.4-b( Flatness-Roller wave distortion-IS 17005)	-	1075	-
5.2.4-c( Flatness-Edge lift-IS 17006)	-	1075	-
5.2.4-d( Flatness-Local distortion-IS 17007)	-	1075	-
5.2.4.1 (Other distortions)	-	1000	-
5.2.5.1( Resistance to shock- IS 17004)	-	33200	-
5.2.5.2( Resistance to human impact- IS 17004)	-	18400	-
5.2.6( Surface Compression (Optional)- IS 17004)	-	8100	-
5.2.7( Mechanical Strength — Four Point Bending Test (Optional)- IS 17004)	-	20500	-
5.2.8.1 & 5.2.8.3-Table 7(Diameter of Holes & Deviations on holes )	-	5350	-
5.2.8.3-Table 8(Deviations on position of holes and Cutouts Location)	-	5350	-
5.3.1 (Thickness-IS 17004 & IS 14900)	-	2100	-
5.3.2.1( Dimensions and squareness- Width )	-	1067	-
5.3.2.1( Dimensions and squareness- Length)	-	1067	-
5.3.2.1( Dimensions and squareness-Squareness)	-	1067	-
5.3.2.2 (Edge displacement)	-	2500	-
5.3.3( Light Stability Test-IS 17004)	-	9600	-
5.3.4( Boil and Bake Tests-IS 17004)	-	5700	-
5.3.5( Fracture and Adhesion Test-IS 17004)	-	3500	-
5.3.6.1( Spot defects in the central area)	-	580	-
5.3.6.2 (Linear defects in the central area)	-	580	-
5.3.6.3( Defects in the outer area for framed edges)	-	580	-
5.3.6.4( Vents)	-	580	-
5.3.6.5( Creases and streaks)	-	580	-
5.3.7( Humidity Test – Optional)	-	51400	-
5.3.8( Resistance to Human Impact Test)	-	18400	-
4(Types)	-	0	-
5.1.1(General)	-	0	-
5.1.2(Optical Faults-IS 14900)	-	0	-
5.1.2(Spot Faults of category A/B/C/D -IS 14900)	-	0	-
5.1.2(Reams, Strings and Lines-IS 14900)	-	0	-
5.1.2(Linear / Extended Faults -IS 14900)	-	0	-
5.2.1 (Thickness -IS 17004 & IS 14900)	-	0	-
5.2.2.1( Dimensions- Width )	-	0	-
5.2.2.1( Dimensions- Length)	-	0	-
5.2.2.2( Squareness)	-	0	-
5.2.3 (Fragmentation Test- IS 17004)	-	0	-
5.2.4-a( Flatness-Overall bow-IS 17004)	-	0	-
5.2.4-b( Flatness-Roller wave distortion-IS 17005)	-	0	-
5.2.4-c( Flatness-Edge lift-IS 17006)	-	0	-
5.2.4-d( Flatness-Local distortion-IS 17007)	-	0	-
5.2.4.1 (Other distortions)	-	0	-
5.2.5.1( Resistance to shock- IS 17004)	-	0	-
5.2.5.2( Resistance to human impact- IS 17004)	-	0	-
5.2.6( Surface Compression (Optional)- IS 17004)	-	0	-
5.2.7( Mechanical Strength — Four Point Bending Test (Optional)- IS 17004)	-	0	-
5.2.8.1 & 5.2.8.3-Table 7(Diameter of Holes & Deviations on holes )	-	0	-
5.2.8.3-Table 8(Deviations on position of holes and Cutouts Location)	-	0	-
5.3.1 (Thickness-IS 17004 & IS 14900)	-	0	-
5.3.2.1( Dimensions and squareness- Width )	-	0	-
5.3.2.1( Dimensions and squareness- Length)	-	0	-
5.3.2.1( Dimensions and squareness-Squareness)	-	0	-
5.3.2.2 (Edge displacement)	-	0	-
5.3.3( Light Stability Test-IS 17004)	-	0	-
5.3.4( Boil and Bake Tests-IS 17004)	-	0	-
5.3.5( Fracture and Adhesion Test-IS 17004)	-	0	-
5.3.6.1( Spot defects in the central area)	-	0	-
5.3.6.2 (Linear defects in the central area)	-	0	-
5.3.6.3( Defects in the outer area for framed edges)	-	0	-
5.3.6.4( Vents)	-	0	-
5.3.6.5( Creases and streaks)	-	0	-
5.3.7( Humidity Test – Optional)	-	0	-
5.3.8( Resistance to Human Impact Test)	-	0	-
4(Types)	-	0	-
5.1.1(General)	-	0	-
5.1.2(Optical Faults-IS 14900)	-	0	-
5.1.2(Spot Faults of category A/B/C/D -IS 14900)	-	0	-
5.1.2(Reams, Strings and Lines-IS 14900)	-	0	-
5.1.2(Linear / Extended Faults -IS 14900)	-	0	-
5.2.1 (Thickness -IS 17004 & IS 14900)	-	0	-
5.2.2.1( Dimensions- Width )	-	0	-
5.2.2.1( Dimensions- Length)	-	0	-
5.2.2.2( Squareness)	-	0	-
5.2.3 (Fragmentation Test- IS 17004)	-	0	-
5.2.4-a( Flatness-Overall bow-IS 17004)	-	0	-
5.2.4-b( Flatness-Roller wave distortion-IS 17005)	-	0	-
5.2.4-c( Flatness-Edge lift-IS 17006)	-	0	-
5.2.4-d( Flatness-Local distortion-IS 17007)	-	0	-
5.2.4.1 (Other distortions)	-	0	-
5.2.5.1( Resistance to shock- IS 17004)	-	0	-
5.2.5.2( Resistance to human impact- IS 17004)	-	0	-
5.2.6( Surface Compression (Optional)- IS 17004)	-	0	-
5.2.7( Mechanical Strength — Four Point Bending Test (Optional)- IS 17004)	-	0	-
5.2.8.1 & 5.2.8.3-Table 7(Diameter of Holes & Deviations on holes )	-	0	-
5.2.8.3-Table 8(Deviations on position of holes and Cutouts Location)	-	0	-
5.3.1 (Thickness-IS 17004 & IS 14900)	-	0	-
5.3.2.1( Dimensions and squareness- Width )	-	0	-
5.3.2.1( Dimensions and squareness- Length)	-	0	-
5.3.2.1( Dimensions and squareness-Squareness)	-	0	-
5.3.2.2 (Edge displacement)	-	0	-
5.3.3( Light Stability Test-IS 17004)	-	0	-
5.3.4( Boil and Bake Tests-IS 17004)	-	0	-
5.3.5( Fracture and Adhesion Test-IS 17004)	-	0	-
5.3.6.1( Spot defects in the central area)	-	0	-
5.3.6.2 (Linear defects in the central area)	-	0	-
5.3.6.3( Defects in the outer area for framed edges)	-	0	-
5.3.6.4( Vents)	-	0	-
5.3.6.5( Creases and streaks)	-	0	-
5.3.7( Humidity Test – Optional)	-	0	-
5.3.8( Resistance to Human Impact Test)	-	0	-
4(Types)	-	0	-
5.1.1(General)	-	0	-
5.1.2(Optical Faults-IS 14900)	-	0	-
5.1.2(Spot Faults of category A/B/C/D -IS 14900)	-	0	-
5.1.2(Reams, Strings and Lines-IS 14900)	-	0	-
5.1.2(Linear / Extended Faults -IS 14900)	-	0	-
5.2.1 (Thickness -IS 17004 & IS 14900)	-	0	-
5.2.2.1( Dimensions- Width )	-	0	-
5.2.2.1( Dimensions- Length)	-	0	-
5.2.2.2( Squareness)	-	0	-
5.2.3 (Fragmentation Test- IS 17004)	-	0	-
5.2.4-a( Flatness-Overall bow-IS 17004)	-	0	-
5.2.4-b( Flatness-Roller wave distortion-IS 17005)	-	0	-
5.2.4-c( Flatness-Edge lift-IS 17006)	-	0	-
5.2.4-d( Flatness-Local distortion-IS 17007)	-	0	-
5.2.4.1 (Other distortions)	-	0	-
5.2.5.1( Resistance to shock- IS 17004)	-	0	-
5.2.5.2( Resistance to human impact- IS 17004)	-	0	-
5.2.6( Surface Compression (Optional)- IS 17004)	-	0	-
5.2.7( Mechanical Strength — Four Point Bending Test (Optional)- IS 17004)	-	0	-
5.2.8.1 & 5.2.8.3-Table 7(Diameter of Holes & Deviations on holes )	-	0	-
5.2.8.3-Table 8(Deviations on position of holes and Cutouts Location)	-	0	-
5.3.1 (Thickness-IS 17004 & IS 14900)	-	0	-
5.3.2.1( Dimensions and squareness- Width )	-	0	-
5.3.2.1( Dimensions and squareness- Length)	-	0	-
5.3.2.1( Dimensions and squareness-Squareness)	-	0	-
5.3.2.2 (Edge displacement)	-	0	-
5.3.3( Light Stability Test-IS 17004)	-	0	-
5.3.4( Boil and Bake Tests-IS 17004)	-	0	-
5.3.5( Fracture and Adhesion Test-IS 17004)	-	0	-
5.3.6.1( Spot defects in the central area)	-	0	-
5.3.6.2 (Linear defects in the central area)	-	0	-
5.3.6.3( Defects in the outer area for framed edges)	-	0	-
5.3.6.4( Vents)	-	0	-
5.3.6.5( Creases and streaks)	-	0	-
5.3.7( Humidity Test – Optional)	-	0	-
5.3.8( Resistance to Human Impact Test)	-	0	-
4(Types)	-	0	-
5.1.1(General)	-	0	-
5.1.2(Optical Faults-IS 14900)	-	0	-
5.1.2(Spot Faults of category A/B/C/D -IS 14900)	-	0	-
5.1.2(Reams, Strings and Lines-IS 14900)	-	0	-
5.1.2(Linear / Extended Faults -IS 14900)	-	0	-
5.2.1 (Thickness -IS 17004 & IS 14900)	-	0	-
5.2.2.1( Dimensions- Width )	-	0	-
5.2.2.1( Dimensions- Length)	-	0	-
5.2.2.2( Squareness)	-	0	-
5.2.3 (Fragmentation Test- IS 17004)	-	0	-
5.2.4-a( Flatness-Overall bow-IS 17004)	-	0	-
5.2.4-b( Flatness-Roller wave distortion-IS 17005)	-	0	-
5.2.4-c( Flatness-Edge lift-IS 17006)	-	0	-
5.2.4-d( Flatness-Local distortion-IS 17007)	-	0	-
5.2.4.1 (Other distortions)	-	0	-
5.2.5.1( Resistance to shock- IS 17004)	-	0	-
5.2.5.2( Resistance to human impact- IS 17004)	-	0	-
5.2.6( Surface Compression (Optional)- IS 17004)	-	0	-
5.2.7( Mechanical Strength — Four Point Bending Test (Optional)- IS 17004)	-	0	-
5.2.8.1 & 5.2.8.3-Table 7(Diameter of Holes & Deviations on holes )	-	0	-
5.2.8.3-Table 8(Deviations on position of holes and Cutouts Location)	-	0	-
5.3.1 (Thickness-IS 17004 & IS 14900)	-	0	-
5.3.2.1( Dimensions and squareness- Width )	-	0	-
5.3.2.1( Dimensions and squareness- Length)	-	0	-
5.3.2.1( Dimensions and squareness-Squareness)	-	0	-
5.3.2.2 (Edge displacement)	-	0	-
5.3.3( Light Stability Test-IS 17004)	-	0	-
5.3.4( Boil and Bake Tests-IS 17004)	-	0	-
5.3.5( Fracture and Adhesion Test-IS 17004)	-	0	-
5.3.6.1( Spot defects in the central area)	-	0	-
5.3.6.2 (Linear defects in the central area)	-	0	-
5.3.6.3( Defects in the outer area for framed edges)	-	0	-
5.3.6.4( Vents)	-	0	-
5.3.6.5( Creases and streaks)	-	0	-
5.3.7( Humidity Test – Optional)	-	0	-
5.3.8( Resistance to Human Impact Test)	-	0	-
4(Types)	-	0	-
5.1.1(General)	-	0	-
5.1.2(Optical Faults-IS 14900)	-	0	-
5.1.2(Spot Faults of category A/B/C/D -IS 14900)	-	0	-
5.1.2(Reams, Strings and Lines-IS 14900)	-	0	-
5.1.2(Linear / Extended Faults -IS 14900)	-	0	-
5.2.1 (Thickness -IS 17004 & IS 14900)	-	0	-
5.2.2.1( Dimensions- Width )	-	0	-
5.2.2.1( Dimensions- Length)	-	0	-
5.2.2.2( Squareness)	-	0	-
5.2.3 (Fragmentation Test- IS 17004)	-	0	-
5.2.4-a( Flatness-Overall bow-IS 17004)	-	0	-
5.2.4-b( Flatness-Roller wave distortion-IS 17005)	-	0	-
5.2.4-c( Flatness-Edge lift-IS 17006)	-	0	-
5.2.4-d( Flatness-Local distortion-IS 17007)	-	0	-
5.2.4.1 (Other distortions)	-	0	-
5.2.5.1( Resistance to shock- IS 17004)	-	0	-
5.2.5.2( Resistance to human impact- IS 17004)	-	0	-
5.2.6( Surface Compression (Optional)- IS 17004)	-	0	-
5.2.7( Mechanical Strength — Four Point Bending Test (Optional)- IS 17004)	-	0	-
5.2.8.1 & 5.2.8.3-Table 7(Diameter of Holes & Deviations on holes )	-	0	-
5.2.8.3-Table 8(Deviations on position of holes and Cutouts Location)	-	0	-
5.3.1 (Thickness-IS 17004 & IS 14900)	-	0	-
5.3.2.1( Dimensions and squareness- Width )	-	0	-
5.3.2.1( Dimensions and squareness- Length)	-	0	-
5.3.2.1( Dimensions and squareness-Squareness)	-	0	-
5.3.2.2 (Edge displacement)	-	0	-
5.3.3( Light Stability Test-IS 17004)	-	0	-
5.3.4( Boil and Bake Tests-IS 17004)	-	0	-
5.3.5( Fracture and Adhesion Test-IS 17004)	-	0	-
5.3.6.1( Spot defects in the central area)	-	0	-
5.3.6.2 (Linear defects in the central area)	-	0	-
5.3.6.3( Defects in the outer area for framed edges)	-	0	-
5.3.6.4( Vents)	-	0	-
5.3.6.5( Creases and streaks)	-	0	-
5.3.7( Humidity Test – Optional)	-	0	-
5.3.8( Resistance to Human Impact Test)	-	0	-

19 Mar, 2029

-
-

144

IS/IEC 61727 (2004)

Photovoltaic PV Systems ” Characteristics of the Utility Interface

70000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Utility compatibility)	-	35000	5% discount for BIS
5(Personnel safety and equipment protection)	-	35000	5% discount for BIS
4(Utility compatibility)	-	-	-
5(Personnel safety and equipment protection)	-	-	-

19 Mar, 2029

-
-

145

IS/IEC 61683 (1999)

Photovoltaic systems - Power conditioners - Procedure for measuring efficiency

116000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Efficiency measurement conditions)	-	29000	5% discount for BIS
5(Efficiency calculations)	-	29000	5% discount for BIS
6(Efficiency test circuits)	-	29000	5% discount for BIS
7(Loss measurement)	-	29000	5% discount for BIS

19 Mar, 2029

-
-

146

IS 16170 : Part 1 (2014)

Photovoltaic (PV) module performance testing and energy rating: Part 1 irradiance and temperature performance measurements and power rating

Photovoltaic (PV) Module

708000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8(Irradiance and Temperature Measurements and power rating)	-	600000	5% discount for BIS
8(Irradiance and Temperature Measurements and power rating)	-	0	-
9(Rating of power)	-	108000	5% discount for BIS

19 Mar, 2029

-
-

147

IS 302 : Part 2 : Sec 24 (1994)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 24 refrigerators, food - Freezers and ice - Makers

Refrigerators, Food-Freezers and Ice-Makers

175000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1 , 7.12, 7.14,7.15(Marking)	-	250	5% Discount to BIS
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	5000	5% discount for BIS
8.1.2(Protection against access to live parts)	-	0	-
8.1.3(Protection against access to live parts)	-	0	-
8.1.4(Protection against access to live parts)	-	0	-
8.1.5(Protection against access to live parts)	-	0	-
9.1(Startability Test)	-	5000	5% discount for BIS
9.2(Startability Test)	-	0	-
10.1,10.2 10.101,10.102( Input and Current)	-	5000	5% discount for BIS
11(TEMPERATURE RISE)	-	7500	5% discount for BIS
11.2(TEMPERATURE RISE)	-	0	-
11.4(TEMPERATURE RISE)	-	0	-
11.5(TEMPERATURE RISE)	-	0	-
11.6(TEMPERATURE RISE)	-	0	-
11.7(TEMPERATURE RISE)	-	0	-
11.8(TEMPERATURE RISE)	-	0	-
11.1(TEMPERATURE RISE)	-	0	-
11.101(TEMPERATURE RISE)	-	0	-
11.102(TEMPERATURE RISE)	-	0	-
11.103(TEMPERATURE RISE)	-	0	-
12,12.1,12.2 & 12.3(Heating)	-	5000	5% discount for BIS
13(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	5000	5% discount for BIS
14( RADIO AND TELEVISION INTERFERENCE SUPPRESSION )	-	5000	5% discount for BIS
15(Moisture resistance)	-	10000	5% discount for BIS
15.2(Moisture resistance)	-	0	-
15.3(Moisture resistance)	-	0	-
15.4(Moisture resistance)	-	0	-
15.101(Moisture resistance)	-	0	-
15.102(Moisture resistance)	-	0	-
15.103(Moisture resistance)	-	0	-
16 & 16.1(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	5000	5% discount for BIS
16.2(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	0	-
16.3 & table(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	0	-
16.4(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	0	-
17(Over load Protection )	-	10000	5% discount for BIS
19(ABNORMAL OPERATION)	-	12500	5% discount for BIS
20.1(Stability and mechanical hazards)	-	10000	5% discount for BIS
20.2(Stability and mechanical hazards)	-	0	-
21.1(MECHANICAL STRENGTH)	-	32500	5% discount for BIS
21.2(MECHANICAL STRENGTH)	-	0	-
22.1(Constructions)	-	2500	5% discount for BIS
22.2(Constructions)	-	0	-
22.3(Constructions)	-	0	-
22.4(Constructions)	-	0	-
22.5(Constructions)	-	0	-
22.6(Constructions)	-	0	-
22.7 to 22.10(Constructions)	-	0	-
22.11(Constructions)	-	0	-
22.12(Constructions)	-	0	-
22.13 to 22.33(Constructions)	-	0	-
22.101 to 22.103(Constructions)	-	0	-
23.1 & 23.2(Internal wiring)	-	2500	5% discount for BIS
23.3(Internal wiring)	-	0	-
23.4(Internal wiring)	-	0	-
23.5 to 23.8(Internal wiring)	-	0	-
24.1(Components)	-	250	5% discount for BIS
24.2 ,24.3,24.5 & 24.6(Components)	-	0	-
25.1(Supply connection and external flexible cords)	-	2500	5% discount for BIS
25.2(Supply connection and external flexible cords)	-	0	-
25.3(Supply connection and external flexible cords)	-	0	-
25.4(Supply connection and external flexible cords)	-	0	-
25.6(Supply connection and external flexible cords)	-	0	-
25.7 to 25.13(Supply connection and external flexible cords)	-	0	-
26.1 to 26.8(Terminals for external conductors)	-	4500	5% discount for BIS
26.9(Terminals for external conductors)	-	0	-
26.10 & 26.13(Terminals for external conductors)	-	0	-
27.1 to 27.4(Provision for earthing)	-	5000	5% discount for BIS
27.5(Provision for earthing)	-	0	-
28.1, Table No.-14(Screws and connections)	-	5000	5% discount for BIS
28.2 to 28.4(Screws and connections)	-	0	-
29.1 and table 2(creepage and Clearances distances )	-	5000	5% discount for BIS
29.2 & 29.3(Clearances, creepage distances )	-	0	-
30.1(Resistance to heat and fire)	-	10000	5% discount for BIS
30.2(Resistance to heat and fire)	-	0	-
30.3(Resistance to heat and fire)	-	0	-
31(Resistance to rusting)	-	10000	5% discount for BIS
32(Radiation, toxicity and similar hazards)	-	10000	5% discount for BIS
7.1 , 7.12, 7.14,7.15(Marking)	-	0	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	0	-
8.1.2(Protection against access to live parts)	-	0	-
8.1.3(Protection against access to live parts)	-	0	-
8.1.4(Protection against access to live parts)	-	0	-
8.1.5(Protection against access to live parts)	-	0	-
9.1(Startability Test)	-	0	-
9.2(Startability Test)	-	0	-
10.1,10.2 10.101,10.102( Input and Current)	-	0	-
11(TEMPERATURE RISE)	-	0	-
11.2(TEMPERATURE RISE)	-	0	-
11.4(TEMPERATURE RISE)	-	0	-
11.5(TEMPERATURE RISE)	-	0	-
11.6(TEMPERATURE RISE)	-	0	-
11.7(TEMPERATURE RISE)	-	0	-
11.8(TEMPERATURE RISE)	-	0	-
11.1(TEMPERATURE RISE)	-	0	-
11.101(TEMPERATURE RISE)	-	0	-
11.102(TEMPERATURE RISE)	-	0	-
11.103(TEMPERATURE RISE)	-	0	-
12,12.1,12.2 & 12.3(Heating)	-	0	-
13(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	0	-
14( RADIO AND TELEVISION INTERFERENCE SUPPRESSION )	-	0	-
15(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.3(Moisture resistance)	-	0	-
15.4(Moisture resistance)	-	0	-
15.101(Moisture resistance)	-	0	-
15.102(Moisture resistance)	-	0	-
15.103(Moisture resistance)	-	0	-
16 & 16.1(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	0	-
16.2(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	0	-
16.3 & table(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	0	-
16.4(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	0	-
17(Over load Protection )	-	0	-
19(ABNORMAL OPERATION)	-	0	-
20.1(Stability and mechanical hazards)	-	0	-
20.2(Stability and mechanical hazards)	-	0	-
21.1(MECHANICAL STRENGTH)	-	0	-
21.2(MECHANICAL STRENGTH)	-	0	-
22.1(Constructions)	-	0	-
22.2(Constructions)	-	0	-
22.3(Constructions)	-	0	-
22.4(Constructions)	-	0	-
22.5(Constructions)	-	0	-
22.6(Constructions)	-	0	-
22.7 to 22.10(Constructions)	-	0	-
22.11(Constructions)	-	0	-
22.12(Constructions)	-	0	-
22.13 to 22.33(Constructions)	-	0	-
22.101 to 22.103(Constructions)	-	0	-
23.1 & 23.2(Internal wiring)	-	0	-
23.3(Internal wiring)	-	0	-
23.4(Internal wiring)	-	0	-
23.5 to 23.8(Internal wiring)	-	0	-
24.1(Components)	-	0	-
24.2 ,24.3,24.5 & 24.6(Components)	-	0	-
25.1(Supply connection and external flexible cords)	-	0	-
25.2(Supply connection and external flexible cords)	-	0	-
25.3(Supply connection and external flexible cords)	-	0	-
25.4(Supply connection and external flexible cords)	-	0	-
25.6(Supply connection and external flexible cords)	-	0	-
25.7 to 25.13(Supply connection and external flexible cords)	-	0	-
26.1 to 26.8(Terminals for external conductors)	-	0	-
26.9(Terminals for external conductors)	-	0	-
26.10 & 26.13(Terminals for external conductors)	-	0	-
27.1 to 27.4(Provision for earthing)	-	0	-
27.5(Provision for earthing)	-	0	-
28.1, Table No.-14(Screws and connections)	-	0	-
28.2 to 28.4(Screws and connections)	-	0	-
29.1 and table 2(creepage and Clearances distances )	-	0	-
29.2 & 29.3(Clearances, creepage distances )	-	0	-
30.1(Resistance to heat and fire)	-	0	-
30.2(Resistance to heat and fire)	-	0	-
30.3(Resistance to heat and fire)	-	0	-
31(Resistance to rusting)	-	0	-
32(Radiation, toxicity and similar hazards)	-	0	-
7.1 , 7.12, 7.14,7.15(Marking)	-	0	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	0	-
8.1.2(Protection against access to live parts)	-	0	-
8.1.3(Protection against access to live parts)	-	0	-
8.1.4(Protection against access to live parts)	-	0	-
8.1.5(Protection against access to live parts)	-	0	-
9.1(Startability Test)	-	0	-
9.2(Startability Test)	-	0	-
10.1,10.2 10.101,10.102( Input and Current)	-	0	-
11(TEMPERATURE RISE)	-	0	-
11.2(TEMPERATURE RISE)	-	0	-
11.4(TEMPERATURE RISE)	-	0	-
11.5(TEMPERATURE RISE)	-	0	-
11.6(TEMPERATURE RISE)	-	0	-
11.7(TEMPERATURE RISE)	-	0	-
11.8(TEMPERATURE RISE)	-	0	-
11.1(TEMPERATURE RISE)	-	0	-
11.101(TEMPERATURE RISE)	-	0	-
11.102(TEMPERATURE RISE)	-	0	-
11.103(TEMPERATURE RISE)	-	0	-
12,12.1,12.2 & 12.3(Heating)	-	0	-
13(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	0	-
14( RADIO AND TELEVISION INTERFERENCE SUPPRESSION )	-	0	-
15(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.3(Moisture resistance)	-	0	-
15.4(Moisture resistance)	-	0	-
15.101(Moisture resistance)	-	0	-
15.102(Moisture resistance)	-	0	-
15.103(Moisture resistance)	-	0	-
16 & 16.1(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	0	-
16.2(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	0	-
16.3 & table(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	0	-
16.4(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	0	-
17(Over load Protection )	-	0	-
19(ABNORMAL OPERATION)	-	0	-
20.1(Stability and mechanical hazards)	-	0	-
20.2(Stability and mechanical hazards)	-	0	-
21.1(MECHANICAL STRENGTH)	-	0	-
21.2(MECHANICAL STRENGTH)	-	0	-
22.1(Constructions)	-	0	-
22.2(Constructions)	-	0	-
22.3(Constructions)	-	0	-
22.4(Constructions)	-	0	-
22.5(Constructions)	-	0	-
22.6(Constructions)	-	0	-
22.7 to 22.10(Constructions)	-	0	-
22.11(Constructions)	-	0	-
22.12(Constructions)	-	0	-
22.13 to 22.33(Constructions)	-	0	-
22.101 to 22.103(Constructions)	-	0	-
23.1 & 23.2(Internal wiring)	-	0	-
23.3(Internal wiring)	-	0	-
23.4(Internal wiring)	-	0	-
23.5 to 23.8(Internal wiring)	-	0	-
24.1(Components)	-	0	-
24.2 ,24.3,24.5 & 24.6(Components)	-	0	-
25.1(Supply connection and external flexible cords)	-	0	-
25.2(Supply connection and external flexible cords)	-	0	-
25.3(Supply connection and external flexible cords)	-	0	-
25.4(Supply connection and external flexible cords)	-	0	-
25.6(Supply connection and external flexible cords)	-	0	-
25.7 to 25.13(Supply connection and external flexible cords)	-	0	-
26.1 to 26.8(Terminals for external conductors)	-	0	-
26.9(Terminals for external conductors)	-	0	-
26.10 & 26.13(Terminals for external conductors)	-	0	-
27.1 to 27.4(Provision for earthing)	-	0	-
27.5(Provision for earthing)	-	0	-
28.1, Table No.-14(Screws and connections)	-	0	-
28.2 to 28.4(Screws and connections)	-	0	-
29.1 and table 2(creepage and Clearances distances )	-	0	-
29.2 & 29.3(Clearances, creepage distances )	-	0	-
30.1(Resistance to heat and fire)	-	0	-
30.2(Resistance to heat and fire)	-	0	-
30.3(Resistance to heat and fire)	-	0	-
31(Resistance to rusting)	-	0	-
32(Radiation, toxicity and similar hazards)	-	0	-
30.1(Resistance to heat and fire)	-	0	-
25.4(Supply connection and external flexible cords)	-	0	-
19.103(ABNORMAL OPERATION)	-	0	-
19.102(ABNORMAL OPERATION)	-	0	-
19.101(ABNORMAL OPERATION)	-	0	-
19.11(ABNORMAL OPERATION)	-	0	-
19.9(ABNORMAL OPERATION)	-	0	-
19.7(ABNORMAL OPERATION)	-	0	-
9(Starting of motor operated Appliances)	-	0	-
32(Radiation, toxicity and similar hazards)	-	0	-
31(Resistance to rusting)	-	0	-
30.3(Resistance to heat and fire)	-	0	-
30.2(Resistance to heat and fire)	-	0	-
30.1(Resistance to heat and fire)	-	0	-
30.1(Resistance to heat and fire)	-	0	-
29.2 & 29.3(Clearances, creepage distances )	-	0	-
29.1 and table 2(creepage and Clearances distances )	-	0	-
28.2 to 28.4(Screws and connections)	-	0	-
28.1, Table No.-14(Screws and connections)	-	0	-
27.5(Provision for earthing)	-	0	-
27.1 to 27.4(Provision for earthing)	-	0	-
26.10 & 26.13(Terminals for external conductors)	-	0	-
26.9(Terminals for external conductors)	-	0	-
26.1 to 26.8(Terminals for external conductors)	-	0	-
25.7 to 25.13(Supply connection and external flexible cords)	-	0	-
25.6(Supply connection and external flexible cords)	-	0	-
25.4(Supply connection and external flexible cords)	-	0	-
25.4(Supply connection and external flexible cords)	-	0	-
25.3(Supply connection and external flexible cords)	-	0	-
25.2(Supply connection and external flexible cords)	-	0	-
25.1(Supply connection and external flexible cords)	-	0	-
24.2 ,24.3,24.5 & 24.6(Components)	-	0	-
24.1(Components)	-	0	-
23.5 to 23.8(Internal wiring)	-	0	-
23.4(Internal wiring)	-	0	-
23.3(Internal wiring)	-	0	-
23.1 & 23.2(Internal wiring)	-	0	-
22.101 to 22.103(Constructions)	-	0	-
22.13 to 22.33(Constructions)	-	0	-
22.12(Constructions)	-	0	-
22.11(Constructions)	-	0	-
22.7 to 22.10(Constructions)	-	0	-
22.6(Constructions)	-	0	-
22.5(Constructions)	-	0	-
22.4(Constructions)	-	0	-
22.3(Constructions)	-	0	-
22.2(Constructions)	-	0	-
22.1(Constructions)	-	0	-
21.2(MECHANICAL STRENGTH)	-	0	-
21.1(MECHANICAL STRENGTH)	-	0	-
20.2(Stability and mechanical hazards)	-	0	-
20.1(Stability and mechanical hazards)	-	0	-
19.103(ABNORMAL OPERATION)	-	0	-
19.102(ABNORMAL OPERATION)	-	0	-
19.101(ABNORMAL OPERATION)	-	0	-
19.11(ABNORMAL OPERATION)	-	0	-
19.9(ABNORMAL OPERATION)	-	0	-
19.7(ABNORMAL OPERATION)	-	0	-
19(ABNORMAL OPERATION)	-	0	-
17(Over load Protection )	-	0	-
16.4(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	0	-
16.3 & table(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	0	-
16.2(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	0	-
16 & 16.1(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	0	-
15.103(Moisture resistance)	-	0	-
15.102(Moisture resistance)	-	0	-
15.101(Moisture resistance)	-	0	-
15.4(Moisture resistance)	-	0	-
15.3(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15(Moisture resistance)	-	0	-
14( RADIO AND TELEVISION INTERFERENCE SUPPRESSION )	-	0	-
13(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	0	-
12,12.1,12.2 & 12.3(Heating)	-	0	-
11.103(TEMPERATURE RISE)	-	0	-
11.102(TEMPERATURE RISE)	-	0	-
11.101(TEMPERATURE RISE)	-	0	-
11.1(TEMPERATURE RISE)	-	0	-
11.8(TEMPERATURE RISE)	-	0	-
11.7(TEMPERATURE RISE)	-	0	-
11.6(TEMPERATURE RISE)	-	0	-
11.5(TEMPERATURE RISE)	-	0	-
11.4(TEMPERATURE RISE)	-	0	-
11.2(TEMPERATURE RISE)	-	0	-
11(TEMPERATURE RISE)	-	0	-
10.1,10.2 10.101,10.102( Input and Current)	-	0	-
9.2(Startability Test)	-	0	-
9.1(Startability Test)	-	0	-
9(Starting of motor operated Appliances)	-	0	-
8.1.5(Protection against access to live parts)	-	0	-
8.1.4(Protection against access to live parts)	-	0	-
8.1.3(Protection against access to live parts)	-	0	-
8.1.2(Protection against access to live parts)	-	0	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	0	-
7.1 , 7.12, 7.14,7.15(Marking)	-	0	-
19.11.4.1(Electrostatic discharges)	-	12500	-
19.11.4.2(Radiated fields)	-	12500	-
19.11.4.3(Fast transient bursts)	-	12500	-
19.11.4.4(Surge immunity test)	-	12500	-
19.11.4.5(Immunity to conducted discharges)	-	12500	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	12500	-
19.11.4.7(Harmonics)	-	12500	-
6(Classifications)	-	0	-
6(Classifications)	-	0	-
7.1 , 7.12, 7.14,7.15(Marking)	-	0	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	0	-
8.1.2(Protection against access to live parts)	-	0	-
8.1.3(Protection against access to live parts)	-	0	-
8.1.4(Protection against access to live parts)	-	0	-
8.1.5(Protection against access to live parts)	-	0	-
9.1(Startability Test)	-	0	-
9.2(Startability Test)	-	0	-
10.1,10.2 10.101,10.102( Input and Current)	-	0	-
11(TEMPERATURE RISE)	-	0	-
11.2(TEMPERATURE RISE)	-	0	-
11.4(TEMPERATURE RISE)	-	0	-
11.5(TEMPERATURE RISE)	-	0	-
11.6(TEMPERATURE RISE)	-	0	-
11.7(TEMPERATURE RISE)	-	0	-
11.8(TEMPERATURE RISE)	-	0	-
11.1(TEMPERATURE RISE)	-	0	-
11.101(TEMPERATURE RISE)	-	0	-
11.102(TEMPERATURE RISE)	-	0	-
11.103(TEMPERATURE RISE)	-	0	-
12,12.1,12.2 & 12.3(Heating)	-	0	-
13(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	0	-
14( RADIO AND TELEVISION INTERFERENCE SUPPRESSION )	-	0	-
15(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.3(Moisture resistance)	-	0	-
15.4(Moisture resistance)	-	0	-
15.101(Moisture resistance)	-	0	-
15.102(Moisture resistance)	-	0	-
15.103(Moisture resistance)	-	0	-
16 & 16.1(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	0	-
16.2(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	0	-
16.3 & table(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	0	-
16.4(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	0	-
17(Over load Protection )	-	0	-
19(ABNORMAL OPERATION)	-	0	-
20.1(Stability and mechanical hazards)	-	0	-
20.2(Stability and mechanical hazards)	-	0	-
21.1(MECHANICAL STRENGTH)	-	0	-
21.2(MECHANICAL STRENGTH)	-	0	-
22.1(Constructions)	-	0	-
22.2(Constructions)	-	0	-
22.3(Constructions)	-	0	-
22.4(Constructions)	-	0	-
22.5(Constructions)	-	0	-
22.6(Constructions)	-	0	-
22.7 to 22.10(Constructions)	-	0	-
22.11(Constructions)	-	0	-
22.12(Constructions)	-	0	-
22.13 to 22.33(Constructions)	-	0	-
22.101 to 22.103(Constructions)	-	0	-
23.1 & 23.2(Internal wiring)	-	0	-
23.3(Internal wiring)	-	0	-
23.4(Internal wiring)	-	0	-
23.5 to 23.8(Internal wiring)	-	0	-
24.1(Components)	-	0	-
24.2 ,24.3,24.5 & 24.6(Components)	-	0	-
25.1(Supply connection and external flexible cords)	-	0	-
25.2(Supply connection and external flexible cords)	-	0	-
25.3(Supply connection and external flexible cords)	-	0	-
25.4(Supply connection and external flexible cords)	-	0	-
25.6(Supply connection and external flexible cords)	-	0	-
25.7 to 25.13(Supply connection and external flexible cords)	-	0	-
26.1 to 26.8(Terminals for external conductors)	-	0	-
26.9(Terminals for external conductors)	-	0	-
26.10 & 26.13(Terminals for external conductors)	-	0	-
27.1 to 27.4(Provision for earthing)	-	0	-
27.5(Provision for earthing)	-	0	-
28.1, Table No.-14(Screws and connections)	-	0	-
28.2 to 28.4(Screws and connections)	-	0	-
29.1 and table 2(creepage and Clearances distances )	-	0	-
29.2 & 29.3(Clearances, creepage distances )	-	0	-
30.1(Resistance to heat and fire)	-	0	-
30.2(Resistance to heat and fire)	-	0	-
30.3(Resistance to heat and fire)	-	0	-
31(Resistance to rusting)	-	0	-
32(Radiation, toxicity and similar hazards)	-	0	-
30.1(Resistance to heat and fire)	-	0	-
25.4(Supply connection and external flexible cords)	-	0	-
19.103(ABNORMAL OPERATION)	-	0	-
19.102(ABNORMAL OPERATION)	-	0	-
19.101(ABNORMAL OPERATION)	-	0	-
19.11(ABNORMAL OPERATION)	-	0	-
19.9(ABNORMAL OPERATION)	-	0	-
19.7(ABNORMAL OPERATION)	-	0	-
9(Starting of motor operated Appliances)	-	0	-
32(Radiation, toxicity and similar hazards)	-	0	-
31(Resistance to rusting)	-	0	-
30.3(Resistance to heat and fire)	-	0	-
30.2(Resistance to heat and fire)	-	0	-
30.1(Resistance to heat and fire)	-	0	-
30.1(Resistance to heat and fire)	-	0	-
29.2 & 29.3(Clearances, creepage distances )	-	0	-
29.1 and table 2(creepage and Clearances distances )	-	0	-
28.2 to 28.4(Screws and connections)	-	0	-
28.1, Table No.-14(Screws and connections)	-	0	-
27.5(Provision for earthing)	-	0	-
27.1 to 27.4(Provision for earthing)	-	0	-
26.10 & 26.13(Terminals for external conductors)	-	0	-
26.9(Terminals for external conductors)	-	0	-
26.1 to 26.8(Terminals for external conductors)	-	0	-
25.7 to 25.13(Supply connection and external flexible cords)	-	0	-
25.6(Supply connection and external flexible cords)	-	0	-
25.4(Supply connection and external flexible cords)	-	0	-
25.4(Supply connection and external flexible cords)	-	0	-
25.3(Supply connection and external flexible cords)	-	0	-
25.2(Supply connection and external flexible cords)	-	0	-
25.1(Supply connection and external flexible cords)	-	0	-
24.2 ,24.3,24.5 & 24.6(Components)	-	0	-
24.1(Components)	-	0	-
23.5 to 23.8(Internal wiring)	-	0	-
23.4(Internal wiring)	-	0	-
23.3(Internal wiring)	-	0	-
23.1 & 23.2(Internal wiring)	-	0	-
22.101 to 22.103(Constructions)	-	0	-
22.13 to 22.33(Constructions)	-	0	-
22.12(Constructions)	-	0	-
22.11(Constructions)	-	0	-
22.7 to 22.10(Constructions)	-	0	-
22.6(Constructions)	-	0	-
22.5(Constructions)	-	0	-
22.4(Constructions)	-	0	-
22.3(Constructions)	-	0	-
22.2(Constructions)	-	0	-
22.1(Constructions)	-	0	-
21.2(MECHANICAL STRENGTH)	-	0	-
21.1(MECHANICAL STRENGTH)	-	0	-
20.2(Stability and mechanical hazards)	-	0	-
20.1(Stability and mechanical hazards)	-	0	-
19.103(ABNORMAL OPERATION)	-	0	-
19.102(ABNORMAL OPERATION)	-	0	-
19.101(ABNORMAL OPERATION)	-	0	-
19.11(ABNORMAL OPERATION)	-	0	-
19.9(ABNORMAL OPERATION)	-	0	-
19.7(ABNORMAL OPERATION)	-	0	-
19(ABNORMAL OPERATION)	-	0	-
17(Over load Protection )	-	0	-
16.4(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	0	-
16.3 & table(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	0	-
16.2(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	0	-
16 & 16.1(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	0	-
15.103(Moisture resistance)	-	0	-
15.102(Moisture resistance)	-	0	-
15.101(Moisture resistance)	-	0	-
15.4(Moisture resistance)	-	0	-
15.3(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15(Moisture resistance)	-	0	-
14( RADIO AND TELEVISION INTERFERENCE SUPPRESSION )	-	0	-
13(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	0	-
12,12.1,12.2 & 12.3(Heating)	-	0	-
11.103(TEMPERATURE RISE)	-	0	-
11.102(TEMPERATURE RISE)	-	0	-
11.101(TEMPERATURE RISE)	-	0	-
11.1(TEMPERATURE RISE)	-	0	-
11.8(TEMPERATURE RISE)	-	0	-
11.7(TEMPERATURE RISE)	-	0	-
11.6(TEMPERATURE RISE)	-	0	-
11.5(TEMPERATURE RISE)	-	0	-
11.4(TEMPERATURE RISE)	-	0	-
11.2(TEMPERATURE RISE)	-	0	-
11(TEMPERATURE RISE)	-	0	-
10.1,10.2 10.101,10.102( Input and Current)	-	0	-
9.2(Startability Test)	-	0	-
9.1(Startability Test)	-	0	-
9(Starting of motor operated Appliances)	-	0	-
8.1.5(Protection against access to live parts)	-	0	-
8.1.4(Protection against access to live parts)	-	0	-
8.1.3(Protection against access to live parts)	-	0	-
8.1.2(Protection against access to live parts)	-	0	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	0	-
7.1 , 7.12, 7.14,7.15(Marking)	-	0	-
6(Classifications)	-	0	-
6(Classifications)	-	0	-

19 Mar, 2029

-
Exclusion: 19.11.4.1 (Electrostatic discharges) 19.11.4.2 (Radiated fields) 19.11.4.3 (Fast transient bursts) 19.11.4.4 (Surge immunity test) 19.11.4.5 (Immunity to conducted discharges) 19.11.4.6 (Class 3 Voltage dips and interruptions) 19.11.4.7 (Harmonics)

148

IS 9857 (1990)

Welding cables - Specification (First Revision)

Welding cables

4800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.1 a) 1)(Annealing test - IS 10810: Part 1)	-	200	-
10.1 a) 2)(Conductor resistance tes - IS 10810 : Part 5)	-	300	-
Table 1 (Thickness of covering)	-	200	-
10.1 c) 1)(Physical tests for covering : Tensile strength )	-	200	-
10.1 c) 1)(Physical tests for covering : Elongation at break )	-	200	-
10.1 c) 2)(Physical tests for covering - Ageing in Air oven : Tensile strength variation)	-	200	-
10.1 c) 2)(Physical tests for covering -Ageing in Air oven : Elongation variation at break )	-	200	-
10.1 c) 3)(Physical tests for covering - Ageing in Air Bomb : Tensile strength variation )	-	200	-
10.1 c) 3)(Physical tests for covering -Ageing in Air Bomb : Elongation variation at break )	-	200	-
10.1 c) 4)(Physical tests for covering - Oil Resistance : Tensile strength variation )	-	200	-
10.1 c) 4)(Physical tests for covering - Oil Resistance : Elongation variation at break )	-	200	-
10.1 c) 5)(Hot set test )	-	500	-
10.1 c) 5)(Permanent set )	-	500	-
11.1(High Voltage Test ( Water Immersion Test ))	-	250	-
11.3(Static Flexibility Test)	-	300	-
11.4(Flammability Test)	-	900	-
10.1 a) 1)(Annealing test - IS 10810: Part 1)	-	0	-
10.1 a) 2)(Conductor resistance tes - IS 10810 : Part 5)	-	0	-
Table 1 (Thickness of covering)	-	0	-
10.1 c) 1)(Physical tests for covering : Tensile strength )	-	0	-
10.1 c) 1)(Physical tests for covering : Elongation at break )	-	0	-
10.1 c) 2)(Physical tests for covering - Ageing in Air oven : Tensile strength variation)	-	0	-
10.1 c) 2)(Physical tests for covering -Ageing in Air oven : Elongation variation at break )	-	0	-
10.1 c) 3)(Physical tests for covering - Ageing in Air Bomb : Tensile strength variation )	-	0	-
10.1 c) 3)(Physical tests for covering -Ageing in Air Bomb : Elongation variation at break )	-	0	-
10.1 c) 4)(Physical tests for covering - Oil Resistance : Tensile strength variation )	-	0	-
10.1 c) 4)(Physical tests for covering - Oil Resistance : Elongation variation at break )	-	0	-
10.1 c) 5)(Hot set test )	-	0	-
10.1 c) 5)(Permanent set )	-	0	-
11.1(High Voltage Test ( Water Immersion Test ))	-	0	-
11.3(Static Flexibility Test)	-	0	-
11.4(Flammability Test)	-	0	-
10.1 a) 1)(Annealing test - IS 10810: Part 1)	-	0	-
10.1 a) 2)(Conductor resistance tes - IS 10810 : Part 5)	-	0	-
Table 1 (Thickness of covering)	-	0	-
10.1 c) 1)(Physical tests for covering : Tensile strength )	-	0	-
10.1 c) 1)(Physical tests for covering : Elongation at break )	-	0	-
10.1 c) 2)(Physical tests for covering - Ageing in Air oven : Tensile strength variation)	-	0	-
10.1 c) 2)(Physical tests for covering -Ageing in Air oven : Elongation variation at break )	-	0	-
10.1 c) 3)(Physical tests for covering - Ageing in Air Bomb : Tensile strength variation )	-	0	-
10.1 c) 3)(Physical tests for covering -Ageing in Air Bomb : Elongation variation at break )	-	0	-
10.1 c) 4)(Physical tests for covering - Oil Resistance : Tensile strength variation )	-	0	-
10.1 c) 4)(Physical tests for covering - Oil Resistance : Elongation variation at break )	-	0	-
10.1 c) 5)(Hot set test )	-	0	-
10.1 c) 5)(Permanent set )	-	0	-
11.1(High Voltage Test ( Water Immersion Test ))	-	250	-
11.3(Static Flexibility Test)	-	250	-
11.4(Flammability Test)	-	800	-
4(Conductor : Material )	-	100	-
5(SEPARATOR)	-	100	-
6(COVERING)	-	100	-
7(CONDUCTOR : CONSTRUCTION )	-	100	-
8(S E P A R A T O R)	-	100	-
9.1(C O V E R I N G : Application )	-	100	-
9.2(T h i c k n e s s o f C o v e r i n g)	-	100	-
9.3(T o l e r a n c e on Thickness o f C o v e r i n g)	-	100	-
9.4(A p p l i c a t i o n of C o v e r i n g)	-	100	-
9.5(Colour of C o v e r i n g)	-	100	-
15.1 (d)(Heat Shock Test)	-	750	-
15.1 (d)(Hot Deformation Test)	-	1000	-
15.1 (d)(Loss Of Mass Test)	-	250	-
10.1(b), Table 1(Thickness of covering)	-	200	-
12.1(Manufacturer's Identification)	-	100	-
12.2(Cable Identification)	-	100	-
12.3(Cable Code)	-	100	-
13.1(Packing )	-	100	-
13.2(Marking)	-	100	-
14(CABLE RATINGS)	-	100	-
15(VOLTAGE DROP)	-	100	-
Table 4(Copper purity test)	-	500	-
Table 2(Oil resistance - Elongation)	-	500	-
Table 2(Oil resistance - Tensile strength )	-	500	-
Table 2(Ageing in air bomb - Elongation)	-	600	-
Table 2(Ageing in air bomb - Tensile strength )	-	600	-
10.1 c) 2)(Physical tests for covering -Ageing in Air oven : Elongation at break )	-	500	-
10.1 c) 2)(Physical tests for covering - Ageing in Air oven : Tensile strength )	-	500	-
11.2(Spark Test)	-	1000	-

19 Mar, 2029

-
-

149

IS 9537 : Part 1 (1980)

Specification for conduits for electrical installations: Part 1 general requirements

Conduits for electrical installations

7200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Marking)	-	250	5% Discount to BIS
7(Dimensions)	-	250	5% Discount to BIS
8(Constrution)	-	250	5% Discount to BIS
9 & 9.2("Mechanical properties Bending test ")	-	750	5% Discount to BIS
9.3(Compression test)	-	750	5% Discount to BIS
9.4(Impact test)	-	750	5% Discount to BIS
9.5(Collapse test)	-	750	5% Discount to BIS
10(Resistance to heat)	-	1000	5% Discount to BIS
11(Resistance to burning)	-	1200	5% Discount to BIS
12(Electrical strength test & Insulation resistance test)	-	1250	5% Discount to BIS
13(Eternal influences)	-	1000	5% Discount to BIS
6(Marking)	-	0	-
7(Dimensions)	-	0	-
8(Constrution)	-	0	-
9 & 9.2("Mechanical properties Bending test ")	-	0	-
9.3(Compression test)	-	0	-
9.4(Impact test)	-	0	-
9.5(Collapse test)	-	0	-
10(Resistance to heat)	-	0	-
11(Resistance to burning)	-	0	-
12(Electrical strength test & Insulation resistance test)	-	0	-
13(Eternal influences)	-	0	-

19 Mar, 2029

-
-

150

IS 9537 : Part 3 (1983)

Specification for conduits for electrical installations: Part 3 rigid plain conduits of insulating meterials

Conduits for electrical installations

3200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.2(Minimum inside diameter of conduit)	-	200	5% Discount to BIS
7.3(Length of conduit)	-	200	5% Discount to BIS
9.2(Bending Test i) At Room Temp ii) At Low Temp (-5 ±2°C))	-	400	5% Discount to BIS
9.3(Compression Test as per caluse 9.3 of IS: 9537 (Part 1)-1980)	-	400	5% Discount to BIS
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	300	5% Discount to BIS
9.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	400	5% Discount to BIS
10.0(Resistance to Heat -Ball presure test)	-	500	5% Discount to BIS
11(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	500	5% Discount to BIS
12(Electrical Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-	500	5% Discount to BIS
7.2(Minimum inside diameter of conduit)	-	0	-
7.3(Length of conduit)	-	0	-
9.2(Bending Test i) At Room Temp ii) At Low Temp (-5 ±2°C))	-	0	-
9.3(Compression Test as per caluse 9.3 of IS: 9537 (Part 1)-1980)	-	0	-
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	0	-
9.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	0	-
10.0(Resistance to Heat -Ball presure test)	-	0	-
11(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	0	-
12(Electrical Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-	0	-
13(Tests for external influence as per clause 13 of IS: 9537 (Part 1)-1980)	-	0	-

19 Mar, 2029

-
-

First
Prev
4
5
6
7
Next
Last

Bureau of Indian Standards

The National Standards Body of India

Bharat Test House Pvt Ltd 1474 Sonipat Haryana

1474, HSIIDC Rai Industrial Estate, SONIPAT, Sonipat, Haryana, 131029

9310314585 bthrai@bharattesthouse.com

Scope List