BIS - LIMS (Laboratory Information Management System)

Bharat Test House Pvt Ltd 1474 Sonipat Haryana

1474, HSIIDC Rai Industrial Estate, SONIPAT, Sonipat, Haryana, 131029

9310314585 bthrai@bharattesthouse.com

Scope List

Reset

177 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 8144 (2018)

Multipurpose dry batteries - Specification (Second Revision)

Multipurpose Dry Batteries

18250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Designation Of Cells and Batteries, IS 8144)	-	250	-
5(Dimensions, IS 8144)	-	500	-
5(Dimensions, IS 8144)	-	500	-
6.1(Terminals, IS 8144)	-	250	-
6.2(Terminals, IS 8144)	-	250	-
7.1(Requirements, IS 8144)	-	0	-
7.2(Requirements, IS 8144)	-	0	-
7.3(Requirements, IS 8144)	-	0	-
8.1(Marking- Cl. 4.1.6, IS 6303)	-	250	-
8.1(Marking- Cl. 4.1.6, IS 6303)	-	250	-
8.1(Marking- Cl. 4.1.6, IS 6303)	-	250	-
8.1(Marking- Cl. 4.1.6, IS 6303)	-	250	-
8.1(Marking- Cl. 4.1.6, IS 6303)	-	250	-
8.1(Marking- Cl. 4.1.6, IS 6303)	-	250	-
8.1(Marking- Cl. 4.1.6, IS 6303)	-	250	-
8.2(Marking, IS 8144)	-	250	-
9.4(Initial Life Test, IS 8144)	-	4000	-
9.4(Initial Life Test (Flash light), IS 8144)	-	4000	-
9.4(Initial Life Test (Digital audio), IS 8144)	-	4000	-
9.4(Initial Life Test (Radio/clock), IS 8144)	-	4000	-
9.4(Initial Life Test (Remote control), IS 8144)	-	4000	-
9.4(Initial Life Test (Motor/toy), IS 8144)	-	4000	-
9.4(Initial Life Test (Tape recorder), IS 8144)	-	4000	-
9.4(Initial Life Test (Pulse test), IS 8144)	-	4000	-
9.4(Initial Life Test (Portable lighting), IS 8144)	-	4000	-
9.4(Initial Life Test (Accelerated/ lot acceptance test), IS 8144)	-	4000	-
9.4(Initial Life Test, IS 8144)	-	4000	-
9.5(Delayed Life Test, IS 8144)	-	5000	-
9.5(Delayed Life Test, IS 8144)	-	5000	-
9.6(Leakage Test, IS 8144)	-	3000	-
9.7(Delayed life test under dry heat conditions, IS 8144)	-	5000	-
9.7(Delayed life test under dry heat conditions, IS 8144)	-	5000	-

19 Mar, 2026

-
-

IS 16169 (2014)

Utility - Interconnected photovoltaic inverters - Test procedure of islanding prevention measures

Photovoltaic Inverters

100000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7, (Elec)(Documentation)	-	0	-
6 to 6.2, (Elec)(Test for single or multi-phase inverter to Pass/fail criteria)	-	100000	5% discount for BIS
Annex A, (Elec)(Islanding as it applies to PV systems)	-	0	-
Annex B, (Elec)(Test for independent islanding device)	-	0	-
6, (Elec)(Test for single or multi-phase inverter)	-	100000	5% discount for BIS

19 Mar, 2026

-
-

IS/IEC 61730 : PART 2 (2004)

Photovoltaic (PV) Module Safety Qualification Part 2 Requirements for Testing

837500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.1(Visual Inspection (MST 01))	-	7500	5% discount for BIS
10.2(Accessibility test (MST 11))	-	22500	5% discount for BIS
10.3(Cut susceptibility test (MST 12))	-	27500	5% discount for BIS
10.4(Ground Continuity Test (MST 13))	-	35000	5% discount for BIS
10.5(Impulse voltage test (MST 14))	-	42500	5% discount for BIS
10.6(Dielectric withstand test (MST 16))	-	47500	5% discount for BIS
10.7(Temperature test (MST 21))	-	85000	5% discount for BIS
10.8(Fire test (MST 23))	-	175000	5% discount for BIS
10.9(Reverse Current overload test (MST 26))	-	90000	5% discount for BIS
10.10(Module breakage test (MST 32))	-	55000	5% discount for BIS
11.1(Partial discharge-test (MST 15))	-	60000	5% discount for BIS
11.2(Conduit Bending test (MST 33))	-	55000	5% discount for BIS
11.3(Terminal box knockout tests (MST 44))	-	55000	5% discount for BIS
Cl.5, Table 7(Thermal cycling (T200) (MST 51))	-	0	5% discount for BIS
Cl.5, Table 7(Thermal cycling (T50) (MST 51))	-	0	5% discount for BIS
Cl.5, Table 7(Humidity freeze (10HF) (MST 52))	-	0	5% discount for BIS
Cl.5, Table 7(Damp heat (DH1000) (MST 53))	-	0	5% discount for BIS
Cl.5, Table 7(UV resistance (MST 54))	-	0	5% discount for BIS
Cl.5, Table 7(Wet leakage current test (MST 17))	-	0	5% discount for BIS
Cl.5, Table 7(Robustness of termination test (MST 42))	-	0	5% discount for BIS
Cl.5, Table 7(Hot spot test (MST 22))	-	0	5% discount for BIS
Cl.5, Table 7(Mechanical load test (MST 34))	-	0	5% discount for BIS

19 Mar, 2026

-
-

IS 9873 : Part 1 (2019)

Safety of toys: Part 1 safety aspects related to mechanical and physical properties (Fourth Revision)

All Toys

8000 View breakup
(5% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2 - 5.24.2( Reasonably foreseeable abuse -Drop Test)	-	750	5% discount for BIS
4.2 - 5.24.3( Reasonably foreseeable abuse -Tip-over test for large and bulky toys)	-	750	5% discount for BIS
4.2 - 5.24.4( Reasonably foreseeable abuse -Dynamic strength test for wheeled ride-on toys other than toy scooters)	-	750	5% discount for BIS
4.2 - 5.24.5( Reasonably foreseeable abuse -Torque test)	-	750	5% discount for BIS
4.2 - 5.24.6.2( Reasonably foreseeable abuse -Tension test for seams in soft-filled (stuffed) toys. beanbag-type toys, and other similar filled toys)	-	750	5% discount for BIS
4.2 - 5.24.6.3( Reasonably foreseeable abuse -Tension test for pompoms)	-	750	5% discount for BIS
4.2 - 5.24.6.4( Reasonably foreseeable abuse -Tension test for protective components)	-	750	5% discount for BIS
4.2 - 5.24.6.5( Reasonably foreseeable abuse -Tension test for a projectile with a suction cup)	-	750	5% discount for BIS
4.2 - 5.24.7( Reasonably foreseeable abuse -Compression test)	-	750	5% discount for BIS
4.2 - 5.24.8.2( Reasonably foreseeable abuse-Flexure test-Wires and other metallic components intended to be bent)	-	750	5% discount for BIS
4.2 - 5.24.8.3( Reasonably foreseeable abuse -Flexure test-Wires likely to be bent)	-	750	5% discount for BIS
4.3.2 - 5.21( Expanding materials)	-	500	5% discount for BIS
4.4.1 - 5.2(Small parts-For children under 36 months)	-	100	5% discount for BIS
4.4.2 - 5.2(Small parts-For children 36 months and over but under 72 months )	-	100	5% discount for BIS
4.5.1.2 - 5.3(Shape, size and strength of certain toys-Squeeze toys, rattles, and certain other toys and components of toys-Test for shape and size of certain toys)	-	100	5% discount for BIS
4.5.1.3 - 5.3(Shape, size and strength of certain toys-Other toys or components of toys with nearly spherical, hemispherical, circular flared, or dome-shaped ends of toys having a mass less than 0,5 kg and intended for children under 18 months-Test for shape and size of certain toys)	-	100	5% discount for BIS
4.5.1.4 - 5.3(Shape, size and strength of certain toys-Toy fasteners (e.g. nails, bolts, screws, and pegs) with nearly spherical, hemispherical, or dome-shaped ends intended for children 18 months and over but under 48 months-Test for shape and size of certain toys)	-	100	5% discount for BIS
4.5.2 - 5.4(Shape, size and strength of certain toys-Small balls-Small balls test)	-	100	5% discount for BIS
4.5.3 - 5.5(Shape, size and strength of certain toys-Pompoms-Test for pompoms)	-	100	5% discount for BIS
4.5.4 - 5.6(Shape, size and strength of certain toys- Pre-school play figures-Test for pre-school play figures)	-	100	5% discount for BIS
4.5.5(Shape, size and strength of certain toys-Toy pacifiers-Nipple length)	-	100	5% discount for BIS
4.5.6(Shape, size and strength of certain toys-Balloons)	-	100	5% discount for BIS
4.5.7(Shape, size and strength of certain toys-Marbles)	-	100	5% discount for BIS
4.5.8 - a(Shape, size and strength of certain toys-Hemispheric-shaped toys-No of Opening)	-	100	5% discount for BIS
4.5.8 - a(Shape, size and strength of certain toys-Hemispheric-shaped toys-Position of opening in Base)	-	100	5% discount for BIS
4.5.8 - a(Shape, size and strength of certain toys-Hemispheric-shaped toys-Position of opening not in Base)	-	100	5% discount for BIS
4.5.8 - b(Shape, size and strength of certain toys-Hemispheric-shaped toys-Extension of divider)	-	100	5% discount for BIS
4.5.8 - c(Shape, size and strength of certain toys-Hemispheric-shaped toys-No of Opening)	-	100	5% discount for BIS
4.5.8 - c(Shape, size and strength of certain toys-Hemispheric-shaped toys-Position of opening )	-	100	5% discount for BIS
4.5.8 - c(Shape, size and strength of certain toys-Hemispheric-shaped toys-Position of opening )	-	100	5% discount for BIS
4.5.8 - d(Shape, size and strength of certain toys-Hemispheric-shaped toys)	-	100	5% discount for BIS
4.5.8 - d(Shape, size and strength of certain toys-Hemispheric-shaped toys-The maximum distance between centrelines of adjacent peaks )	-	100	5% discount for BIS
4.5.8 - d(Shape, size and strength of certain toys-Hemispheric-shaped toys-Minimum depth)	-	100	5% discount for BIS
4.6.1 a - 5.8(Edges-Accessible sharp edges of glass or metal-Sharp edge test)	-	250	5% discount for BIS
4.6.1 b(Edges-Accessible sharp edges of glass or metal- gap between the edge and the adjacent surface)	-	250	5% discount for BIS
4.6.2(Edges-Functional sharp edges)	-	250	5% discount for BIS
4.6.3 - 5.8(Edges-Edges on metal toys-Sharp edge test)	-	250	5% discount for BIS
4.6.4( Edges-Edges on moulded toys)	-	250	5% discount for BIS
4.6.5( Edges-Edges on exposed bolts or threaded rod)	-	250	5% discount for BIS
4.7.1 - 5.9(Points-Accessible sharp points-sharp-point test)	-	150	5% discount for BIS
4.7.2 - a(Points-Functional sharp points)	-	150	5% discount for BIS
4.7.2 - b(Points-Functional sharp points)	-	150	5% discount for BIS
4.7.3 (Wooden toys)	-	150	5% discount for BIS
4.8.1(Projections-General requirments)	-	100	5% discount for BIS
4.9(a) - 5.24.8.2( Metal wires and rods-wires and other metallic components intended to be bent)	-	750	5% discount for BIS
4.9(b) - 5.24.8.3( Metal wires and rods-wires likely to be bent)	-	750	5% discount for BIS
4.9 - c( Metal wires and rods)	-	750	5% discount for BIS
4.9 - c - 5.8( Metal wires and rods-Sharp edge test)	-	250	5% discount for BIS
4.9 - c - 5.9( Metal wires and rods-Sharp Point test)	-	150	5% discount for BIS
4.9 - c( Metal wires and rods-Minimum dia of spokes)	-	100	5% discount for BIS
4.9 - c( Metal wires and rods-Spokes ends)	-	100	5% discount for BIS
4.10(a) - 5.10(Plastic film or plastic bags in packaging and in toys-average thickness)	-	100	5% discount for BIS
4.10(a) - 5.10(Plastic film or plastic bags in packaging and in toys- individual thickness)	-	100	5% discount for BIS
4.11.2.1(a) - 5.11.2( Cords-Cords in toys intended for children under 18 months-Cords with the potential to tangle-Length of cords and electrical cables)	-	150	5% discount for BIS
4.11.2.1(b) - 5.11.3( Cords-Cords in toys intended for children under 18 months-Cords with the potential to tangle-breakaway feature separation test)	-	150	5% discount for BIS
4.11.2.1(b) - 5.11.2( Cords-Cords in toys intended for children under 18 months-Cords with the potential to tangle-Length of cords and electrical cables after breakaway feature separation test)	-	150	5% discount for BIS
4.11.2.2 - 5.11.2( Cords-Cords in toys intended for children under 18 months--Other cords-free length )	-	150	5% discount for BIS
4.11.3.1(a) - 5.11.2( Cords-Cords in toys intended for children 18 months and over but under 36 months-Cords with the potential to tangle-Length of cords and electrical cables)	-	150	5% discount for BIS
4.11.3.1(b) - 5.11.3( Cords-Cords in toys intended for children 18 months and over but under 36 months-Cords with the potential to tangle-breakaway feature separation test)	-	150	5% discount for BIS
4.11.3.1(b) - 5.11.2( Cords-Cords in toys intended for children 18 months and over but under 36 months-Cords with the potential to tangle-Length of cords and electrical cables after breakaway feature separation test)	-	150	5% discount for BIS
4.11.3.2( Cords-Cords in toys intended for children 18 months and over but under 36 months-Other cords)	-	150	5% discount for BIS
4.11.3.3 ( Cords-Cords in toys intended for children 18 months and over but under 36 months-Other cords without a free end )	-	150	5% discount for BIS
4.11.4(a) - 5.11.4.1(Cords-Fixed loops and nooses intended for children under 36 months-Test for fixed loops and nooses-Head probe push test)	-	150	5% discount for BIS
4.11.4(a) - 5.11.4.2(Cords-Fixed loops and nooses intended for children under 36 months-Test for fixed loops and nooses-Elastic materials)	-	150	5% discount for BIS
4.11.4(b) - 5.11.3(Cords-Fixed loops and nooses intended for children under 36 months-Breakaway feature separation test)	-	150	5% discount for BIS
4.11.5 - 5.11.2(Cords-Cords on pull toys-free length)	-	150	5% discount for BIS
4.11.6(Cords- Electrical cables)	-	150	5% discount for BIS
4.11.7 - 5.11.1(Cords- Diameter of certain cords intended for children under 36 months-cords cross-sectional dimension)	-	150	5% discount for BIS
4.11.8 - 5.11.5(Cords- Self-retracting cords intended for children under 36 months-self-retracting cords)	-	150	5% discount for BIS
4.11.9.1(Cords-Toys intended to be strung across a cradle, cot, perambulator or carriage)	-	150	5% discount for BIS
4.11.9.2 (Cords-Toys otherwise intended to be attached to a cradle, cot, perambulator or carriage)	-	150	5% discount for BIS
4.11.9.2 (Cords-Toys otherwise intended to be attached to a cradle, cot, perambulator or carriage)	-	150	5% discount for BIS
4.11.10(Cords-Cords on toy bags)	-	150	5% discount for BIS
4.11.11 - 5.11.6( Cords, strings and lines for flying toys- electrical resistance)	-	150	5% discount for BIS
4.11.11( Cords, strings and lines for flying toys- )	-	150	5% discount for BIS
4.12.1(a - 1)(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	250	5% discount for BIS
4.12.1(a - 2)(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	250	5% discount for BIS
4.12.1(a - 3) - 5.22.2(Folding mechanisms-Toy pushchairs, perambulators and similar toys-toy pushchairs and perambulators)	-	250	5% discount for BIS
4.12.1(a - 4)(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	250	5% discount for BIS
4.12.1(a - 5) - 5.22.2(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	250	5% discount for BIS
4.12.1(b - 1)(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	250	5% discount for BIS
4.12.1(b - 2) - 5.22.2(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	250	5% discount for BIS
4.12.1(b - 3) - 5.22.2(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	250	5% discount for BIS
4.12.2 (a) - 5.22.3(Folding mechanisms-Other toys with folding mechanisms)	-	250	5% discount for BIS
4.12.2 (b)(Folding mechanisms-Other toys with folding mechanisms)	-	250	5% discount for BIS
4.12.3(Folding mechanisms-Hinge line clearance)	-	250	5% discount for BIS
4.13.1(Holes, clearances and accessibility of mechanisms-Circular holes in rigid materials)	-	100	5% discount for BIS
4.13.2 (Holes, clearances and accessibility of mechanisms-Accessible clearances for movable segments)	-	100	5% discount for BIS
4.13.3(Holes, clearances and accessibility of mechanisms- Chains or belts in ride-on toys)	-	100	5% discount for BIS
4.13.3 - 5.7(Holes, clearances and accessibility of mechanisms- Chains or belts in ride-on toys-accessibility of a part or component)	-	100	5% discount for BIS
4.13.4(Holes, clearances and accessibility of mechanisms-Other driving mechanisms)	-	100	5% discount for BIS
4.13.5(Holes, clearances and accessibility of mechanisms-Winding keys)	-	100	5% discount for BIS
4.14(a)(Springs)	-	100	5% discount for BIS
4.14(b)(Springs)	-	100	5% discount for BIS
4.14(c)(Springs)	-	100	5% discount for BIS
4.15.1.1 - 5.12.2( Stability and overload requirements-Stability of ride-on toys and seats-Sideways stability, feet available for stabilization)	-	200	5% discount for BIS
4.15.1.2 - 5.12.3( Stability and overload requirements-Stability of ride-on toys and seats-Sideways stability, feet unavailable for stabilization)	-	200	5% discount for BIS
4.15.1.3 - 5.12.4( Stability and overload requirements-Stability of ride-on toys and seats-Fore and aft stability Test)	-	200	5% discount for BIS
4.15.2 - 5.12.5( Stability and overload requirements-Overload requirements for ride-on toys and seats-overload test for ride-on toys and seats)	-	200	5% discount for BIS
4.15.2 - 5.24.4( Stability and overload requirements-Overload requirements for ride-on toys and seats-dynamic strength test for wheeled ride-on toys other than toy scooters)	-	750	5% discount for BIS
4.15.3 - 5.12.6( Stability and overload requirements-Stability of stationary floor toy-Stability test of stationary floor toys)	-	200	5% discount for BIS
4.16.1(Enclosures-Ventilation)	-	500	5% discount for BIS
4.16.1(Enclosures-Ventilation-No of openings)	-	500	5% discount for BIS
4.16.1(Enclosures-Ventilation-Area of Each openings(If two openings))	-	500	5% discount for BIS
4.16.1(Enclosures-Ventilation-Distance between openings(If two openings))	-	500	5% discount for BIS
4.16.1(Enclosures-Ventilation-Area of Each openings(If One opening))	-	500	5% discount for BIS
4.16.1(Enclosures-Ventilation-spacing(If One opening))	-	500	5% discount for BIS
4.16.2.1(Enclosures-Closures-Lids, doors and similar devices)	-	500	5% discount for BIS
4.16.2.1 - 5.13.1(Enclosures-Closures-Lids, doors and similar devices-Test For closures)	-	500	5% discount for BIS
4.16.2.2(a)(Enclosures-Closures-Lid support for toy chests and similar toys)	-	500	5% discount for BIS
4.16.2.2(a) - 5.13.2.1(Enclosures-Closures-Lid support for toy chests and similar toys-Test For lid support)	-	500	5% discount for BIS
4.16.2.2(a) - 5.13.2.2(Enclosures-Closures-Lid support for toy chests and similar toys- After durability test for toy chest lids)	-	500	5% discount for BIS
4.16.2.2(a) - 5.13.2.2(Enclosures-Closures-Lid support for toy chests and similar toys-Test For lid support After durability test for toy chest lids)	-	500	5% discount for BIS
4.16.2.2(b) - 5.13.2.2(Enclosures-Closures-Lid support for toy chests and similar toys-durability test for toy chest lids)	-	500	5% discount for BIS
4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 1)(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	5% discount for BIS
4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 2)(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	5% discount for BIS
4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 3) - 5.22.2(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys-toy pushchairs and perambulators)	-	500	5% discount for BIS
4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 4)(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	5% discount for BIS
4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 5) - 5.22.2(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	5% discount for BIS
4.16.2.2(c) - 5.13.2.2 - 4.12.1(b - 1)(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	5% discount for BIS
4.16.2.2(c) - 5.13.2.2 - 4.12.1(b - 2) - 5.22.2(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	5% discount for BIS
4.16.2.2(c) - 5.13.2.2 - 4.12.1(b - 3) - 5.22.2(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	5% discount for BIS
4.16.2.2(c) - 5.13.2.2 - 4.12.2 (a) - 5.22.3(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Other toys with folding mechanisms)	-	500	5% discount for BIS
4.16.2.2(c) - 5.13.2.2 - 4.12.2 (b)(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Other toys with folding mechanisms)	-	500	5% discount for BIS
4.16.2.2(c) - 5.13.2.2 - 4.12.3(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Hinge line clearance)	-	500	5% discount for BIS
4.16.2.2(d)(Enclosures-Closures-Lid support for toy chests and similar toys)	-	500	5% discount for BIS
4.16.3(Enclosures-Toys that enclose the head)	-	500	5% discount for BIS
4.16.3(Enclosures-Toys that enclose the head-No of openings)	-	500	5% discount for BIS
4.16.3(Enclosures-Toys that enclose the head-Area of Each openings(If two openings))	-	500	5% discount for BIS
4.16.3(Enclosures-Toys that enclose the head-Distance between openings(If two openings))	-	500	5% discount for BIS
4.16.3(Enclosures-Toys that enclose the head-Area of Each openings(If One opening))	-	500	5% discount for BIS
4.17 - 5.14(Simulated protective equipment, such as helmets, hats and goggles-Impact test for toys that cover the face)	-	100	5% discount for BIS
4.17(Simulated protective equipment, such as helmets, hats and goggles)	-	100	5% discount for BIS
4.18.2(a) - 5.36(Projectile toys-Projectiles-tip assessment of rigid projectiles)	-	100	5% discount for BIS
4.18.2(b)(Projectile toys-Projectiles)	-	100	5% discount for BIS
4.18.2(c)(Projectile toys-Projectiles)	-	100	5% discount for BIS
4.18.2(c)(Projectile toys-Projectiles-Radius)	-	100	5% discount for BIS
4.18.2(d) - 5.37(Projectile toys-Projectiles-length of suction cup projectiles)	-	100	5% discount for BIS
4.18.2(d) - 5.37 - 5.24.5(Projectile toys-Projectiles-length of suction cup projectiles After torque test)	-	100	5% discount for BIS
4.18.2(d) - 5.37 - 5.24.6.5(Projectile toys-Projectiles-length of suction cup projectiles After tension test for a projectile with a suction cup)	-	100	5% discount for BIS
4.18.2 - e - 5.24.5(Projectile toys-Projectiles-torque test)	-	100	5% discount for BIS
4.18.2 - e - 5.24.6.5(Projectile toys-Projectiles-tension test for a projectile with a suction cup)	-	100	5% discount for BIS
4.18.3(a) - 5.2(Projectile toys-Projectile toys with stored energy-small parts test)	-	100	5% discount for BIS
4.18.3(a) - 5.3 - 5.24(Projectile toys-Projectile toys with stored energy-small parts test after reasonably foreseeable abuse testing)	-	100	5% discount for BIS
4.18.3(a) - 5.4(Projectile toys-Projectile toys with stored energy--small parts test after (wall impact test for projectiles)	-	100	5% discount for BIS
4.18.3(b)(Projectile toys-Projectile toys with stored energy)	-	100	5% discount for BIS
4.18.3(b) - 5.15.1.3.3(Projectile toys-Projectile toys with stored energy-determination of kinetic energy per area of contact)	-	200	5% discount for BIS
4.18.3(c ) - 5.24.5(Projectile toys-Projectile toys with stored energy-torque test)	-	100	5% discount for BIS
4.18.3(c ) - 5.24.6.4(Projectile toys-Projectile toys with stored energy- tension test for protective components)	-	100	5% discount for BIS
4.18.3(c )(Projectile toys-Projectile toys with stored energy)	-	100	5% discount for BIS
4.18.3(d) - 5.15.2(Projectile toys-Projectile toys with stored energy-Wall impact test for projectiles)	-	200	5% discount for BIS
4.18.3(e )(Projectile toys-Projectile toys with stored energystored energy-Discharge mechanism)	-	200	5% discount for BIS
4.18.4.1 - 5.20(Projectile toys-Projectile toys without stored energy-Mouth-actuated projectile toys-durability of mouth-actuated toys)	-	250	5% discount for BIS
4.18.4.2(a) - 5.15.1.3.3(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-determination of the kinetic energy per area of contact when the contact area of the dart shall be at least 3 cm^2)	-	200	5% discount for BIS
4.18.4.2(b)(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart)	-	200	5% discount for BIS
4.18.4.2(c ) - 5.24.5(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-After torque test)	-	200	5% discount for BIS
4.18.4.2(c ) - 5.24.5(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-Contact area After torque test)	-	200	5% discount for BIS
4.18.4.2(c ) - 5.24.6.4(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-After tension test for protective components)	-	200	5% discount for BIS
4.18.4.2(c ) - 5.24.6.4(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-Contact area After tension test for protective components)	-	200	5% discount for BIS
4.18.4.6 - 5.24.6.4 - 5.15.1.3.3(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set-kinetic energy per area After tension test for protective components)	-	200	5% discount for BIS
4.19(Rotors and propellers)	-	250	5% discount for BIS
4.2(Aquatic toys)	-	200	5% discount for BIS
4.21(a)(Braking)	-	250	5% discount for BIS
4.21(a)(Braking-brake performance for mechanically or electrically powered ride-on toys other than toy bicycles)	-	250	5% discount for BIS
4.22.1(Toy bicycles-Instructions for use)	-	250	5% discount for BIS
4.22.2(Toy bicycles-Determination of maximum saddle height)	-	250	5% discount for BIS
4.22.3 - 5.16.1(Toy bicycles-Braking requirements-determination of free-wheeling facility)	-	250	5% discount for BIS
4.22.3 (Toy bicycles-Braking requirements- brake lever dimension(d))	-	250	5% discount for BIS
4.22.3 (Toy bicycles-Braking requirements- lever Length(l))	-	250	5% discount for BIS
4.22.3 - 5.16.3(Toy bicycles-Braking requirements- brake performance for toy bicycles)	-	250	5% discount for BIS
4.23 - 5.17(Speed limitation of electrically driven ride-on toys-determination of speed of electrically driven ride-on toys)	-	500	5% discount for BIS
4.24(a) - 5.18(Toys containing a heat source-determination of temperature increases)	-	300	5% discount for BIS
4.24(b) - 5.18(Toys containing a heat source-rise in temperature of handles, knobs and similar parts which are likely to be touched by hand-(Parts made of metals))	-	300	5% discount for BIS
4.24(b) - 5.18(Toys containing a heat source-rise in temperature of handles, knobs and similar parts which are likely to be touched by hand(Parts made of glass or porcelain))	-	300	5% discount for BIS
4.24(b) - 5.18(Toys containing a heat source-rise in temperature of handles, knobs and similar parts which are likely to be touched by hand(Parts made of Plastic or wood ))	-	300	5% discount for BIS
4.24(c) - 5.18(Toys containing a heat source- rise in temperature of other accessible parts of the toy(Parts made of metals))	-	300	5% discount for BIS
4.24(c) - 5.18(Toys containing a heat source- rise in temperature of other accessible parts of the toy( Parts made of other materials))	-	300	5% discount for BIS
4.25 - 5.19(Liquid-filled toys-leakage of liquid-filled toys)	-	150	5% discount for BIS
4.26(a) - 5.2( Mouth-actuated toys-small parts test)	-	100	5% discount for BIS
4.26(b) - 5.24.5 - 5.3( Mouth-actuated toys-small parts test after torque test)	-	100	5% discount for BIS
4.26(b) - 5.24.6.1 - 5.4( Mouth-actuated toys-small parts test after tension test, general procedure)	-	100	5% discount for BIS
4.26(c ) - 5.20 - 5.2( Mouth-actuated toys-small parts test after durability of mouth-actuated toys)	-	100	5% discount for BIS
4.27(Toy roller skates, toy inline skates and toy skateboards)	-	200	5% discount for BIS
4.28( Percussion caps specifically designed for use in toys)	-	200	5% discount for BIS
4.29(a) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	250	5% discount for BIS
4.29(b) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	250	5% discount for BIS
4.29(c) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	250	5% discount for BIS
4.29(d) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	250	5% discount for BIS
4.29(e) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	250	5% discount for BIS
4.29(f) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	250	5% discount for BIS
4.29(g) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	250	5% discount for BIS
4.30.2(Toy scooters-Warnings and instructions for use)	-	200	5% discount for BIS
4.30.3 - 5.26 - 5.8(Toy scooters-Strength-After static strength for toy scooters- sharp edge test)	-	200	5% discount for BIS
4.30.3 - 5.26 - 5.9(Toy scooters-Strength-static strength for toy scooters-sharp-point test)	-	200	5% discount for BIS
4.30.3 - 5.26(Toy scooters-Strength-static strength for toy scooters)	-	200	5% discount for BIS
4.30.3 - 5.27 - 5.8(Toy scooters-Strength-dynamic strength for toy scooters- sharp-edge test)	-	250	5% discount for BIS
4.30.3 - 5.27 - 5.9(Toy scooters-Strength-dynamic strength for toy scooters-sharp-point test)	-	250	5% discount for BIS
4.30.3 - 5.29(Toy scooters-Strength-strength of toy scooter steering tubes)	-	150	5% discount for BIS
4.30.3 - 5.27(Toy scooters-Strength-dynamic strength for toy scooters)	-	250	5% discount for BIS
4.30.4 - 5.12.2(Toy scooters-Stability-sideways stability test, feet available for stabilization)	-	200	5% discount for BIS
4.30.5(a)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	200	5% discount for BIS
4.30.5(a)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	200	5% discount for BIS
4.30.5(b)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	200	5% discount for BIS
4.30.5(c)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	200	5% discount for BIS
4.30.5(d)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	200	5% discount for BIS
4.30.5(e)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	200	5% discount for BIS
4.30.5(f) - 5.30( Toy scooters-Adjustable and folding steering tubes and handlebars-resistance to separation of handlebar)	-	100	5% discount for BIS
4.30.6 ( Toy scooters-Braking)	-	250	5% discount for BIS
4.30.6 ( Toy scooters-Braking)	-	250	5% discount for BIS
4.30.6 - 5.28( Toy scooters-Braking- force required to hold the toy)	-	250	5% discount for BIS
4.30.7( Toy scooters-Wheel size(diameter))	-	200	5% discount for BIS
4.30.8(Toy scooters-Projections)	-	250	5% discount for BIS
4.30.8(Toy scooters-Projections(rounded handlebar grips or plugs Diameter))	-	250	5% discount for BIS
4.30.8(Toy scooters-Projections(rounded handlebar grips or plugs space from end))	-	250	5% discount for BIS
4.31(Magnets and magnetic components-Magnetic/electrical experimental sets intended for children 8 years and over)	-	100	5% discount for BIS
4.31.1 - 5.32(Magnets and magnetic components-Magnetic/electrical experimental sets intended for children 8 years and over-magnetic flux index)	-	100	5% discount for BIS
4.31.1 - 5.2(Magnets and magnetic components-Magnetic/electrical experimental sets intended for children 8 years and over-small parts test)	-	100	5% discount for BIS
4.31.2(a) - 5.32(Magnets and magnetic components-All other toys with magnets and magnetic components-magnetic flux index)	-	100	5% discount for BIS
4.31.2(a) - 5.32(Magnets and magnetic components-All other toys with magnets and magnetic components-small parts test)	-	100	5% discount for BIS
4.31.2(b) - 5.34 - 5.2(Magnets and magnetic components-All other toys with magnets and magnetic components-soaking test for magnets-small parts test)	-	200	5% discount for BIS
4.31.2(c ) - 5.31 - 5.24.2 - 5.24.3 - 5.24.5 - 5.24.6.1 - 5.24.6.2 - 5.33 - 5.31 - 5.32(Magnets and magnetic components-All other toys with magnets and magnetic components-magnetic flux index After Following tests: -tension test for magnets; -drop test/tip over test for large and bulky toys; -torque test; -tension test, general procedure; -tension test for seams in soft-filled (stuffed) toys, beanbag-type toys and other similar filled toys, if applicable; -impact test for magnets; -compression test; -tension test for magnets;)	-	200	5% discount for BIS
4.31.2(c ) - 5.31 - 5.24.2 - 5.24.3 - 5.24.5 - 5.24.6.1 - 5.24.6.2 - 5.33 - 5.31 - 5.2(Magnets and magnetic components-All other toys with magnets and magnetic components-small parts test After Following tests: -tension test for magnets; -drop test/tip over test for large and bulky toys; -torque test; -tension test, general procedure; -tension test for seams in soft-filled (stuffed) toys, beanbag-type toys and other similar filled toys, if applicable; -impact test for magnets; -compression test; -tension test for magnets;)	-	200	5% discount for BIS
4.32 - 5.38.2( Yo-yo balls - length (lo) of the yo-yo ball tether)	-	200	5% discount for BIS
4.32 - 5.38.1( Yo-yo balls - The ratio of the mass m (in grams) to the elastic constant k of the yo-yo ball tether(m/k))	-	200	5% discount for BIS
4.33 - 5.11.3(Straps intended to be worn fully or partially around the neck-breakaway feature separation test)	-	150	5% discount for BIS
4.34(Sledges and toboggans with cords for pulling)	-	200	5% discount for BIS
4.35.3 - 5.39(Jaw entrapment in handles and steering wheels-jaw entrapment test)	-	100	5% discount for BIS

19 Mar, 2026

-
-

IS 16102 : Part 2 (2017)

Self - Ballasted led lamps for general lighting services: Part 2 performance requirements (First Revision)

Self-Ballasted LED Lamps for General Lighting Services

190000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Dimensions)	-	2500	5% discount for BIS
8(Lamp Input)	-	15000	5% discount for BIS
9(light output)	-	17500	5% discount for BIS
10(Colour Nomenclature, Variation and Rendering)	-	30000	5% discount for BIS
11(Lamp Life)	-	125000	5% discount for BIS

19 Mar, 2026

-
-

IS 16221 : Part 1 (2016)

Safety of Power Converters for use in Photovoltaic Power Systems Part 1 General Requirements

Power Converters for use in Photovoltaic Power Systems

454000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General testing requirements)	-	100000	5% discount for BIS
5(Marking and documentation)	-	6000	5% discount for BIS
6(Environmental Requirements and conditions)	-	130000	5% discount for BIS
7(Protection against electric shock and energy hazards)	-	60000	5% discount for BIS
8(Protection Against mechanical Hazards)	-	30000	5% discount for BIS
9(Protection Against Fire Hazards)	-	40000	5% discount for BIS
11(Protection against liquid hazards)	-	30000	5% discount for BIS
12(Chemical hazards)	-	8000	5% discount for BIS
13(Physical requirements)	-	40000	5% discount for BIS
14(Components)	-	0	-
15(Software and firmware performing safety functions)	-	0	-
10(Protection against Sonic Pressure hazards)	-	10000	5% discount for BIS

19 Mar, 2026

-
Excluding: Cl.10.2-Protection against sonic Pressure hazards Cl.13.6.4-UV resistance Cl.14 –Component Cl.15- Software and firmware performing safety function

IS 15644 (2006)

Safety of electric toys

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.0(Marking and instructions)	-	0	Nil.
8.0(Power Input)	-	750	5% discount for BIS
9.0(Heating and abnormal operation)	-	4000	5% discount for BIS
10.0(Electrical strength at operating temperature)	-	1000	5% discount for BIS
11.1(Moisture resistance)	-	1750	5% discount for BIS
11.2(Resistant to humidity)	-	1750	5% discount for BIS
12.0(Electric strength at room temperature)	-	1000	5% discount for BIS
13.0(Mechanical strength)	-	750	5% discount for BIS
15.1(Protection of cords and wires)	-	250	5% discount for BIS
15.2(Protection of cords and wires)	-	250	5% discount for BIS
16.0(Components)	-	0	Nil.
17 Table-1(Screws and connections)	-	250	5% discount for BIS
17 Table-1(Nominal daimeter of screws made of insulating material)	-	250	5% discount for BIS
18.0(Clearance and creepage distance)	-	200	5% discount for BIS
19.1(Ball pressure test IEC 60695-10-2)	-	500	5% discount for BIS
19.2.1(Glow wire test IEC 60695-2-11)	-	500	5% discount for BIS
19.2.2(Needle flame test)	-	500	5% discount for BIS
14.1(Construction)	-	50	5% discount for BIS
14.2(Construction)	-	0	NIL.
14.3(Construction)	-	0	NIL.
14.4(Construction)	-	0	NIL.
14.5(Construction)	-	0	NIL.
14.6(Construction)	-	0	NIL.
14.7(Construction)	-	100	5% discount for BIS
14.8(Construction)	-	0	NIL.
14.9(Construction)	-	0	NIL.
14.1(Construction)	-	0	NIL.
14.11(Construction)	-	50	5% discount for BIS
14.12(Construction)	-	50	5% discount for BIS
14.13(Construction)	-	50	5% discount for BIS
14.14(Construction)	-	0	NIL.

19 Mar, 2026

-
-

IS 9873 : Part 4 (2017)

Safety of toys: Part 4 swings, slides and similar activity toys for indoor and outdoor family domestic use

18500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1 and 6.2.1( Strength of toys other than swings)	-	3000	5% discount for BIS
4.1.2 and A.4.1.2(Maximum height)	-	0	NIL.
4.1.3 and A.4.1.3(Corners and edges on moving parts)	-	0	NIL.
4.1.3 and A.4.1.3(Corners and edges other than moving parts)	-	0	NIL.
4.1.4.1 and 6.7.1 and Fig.6(Protruding parts)	-	1500	5% discount for BIS
4.1.4.2 and 6.7.1 and Fig.7(All protrusions)	-	1500	5% discount for BIS
4.1.4.3 and 6.7.1 and Fig.8(Upright protrusions)	-	1500	5% discount for BIS
4.1.4.4 and 6.7.2 (Motion rides)	-	1500	5% discount for BIS
4.1.4.5 and 6.7.1.2 and Fig.9(Slides)	-	1500	5% discount for BIS
4.1.4.5 (Slides)	-	0	NIL.
4.1.5 and A.4.1.5.(Climbing and swinging ropes, chains and cables)	-	0	NIL.
4.1.5 and A.4.1.5.(Climbing and swinging ropes, chains and cables)	-	0	NIL.
4.1.6 (Open tubing IS 9873 -1 / ISO 8124-1.)	-	0	NIL.
4.2 and A.4.2.(Barriers-Barriers for platforms from 760 mm to 1 000 mm above the ground)	-	0	NIL.
4.2 and A.4.2.(Barriers-Barriers for platforms greater than 1 000 mm and up to 1 830 mm above the ground)	-	0	NIL.
4.2 and A.4.2.(Barriers for platforms more than 1 830 mm above the ground)	-	0	NIL.
4.2 and A.4.2.(Barriers for platforms from 760 mm to 1 000 mm above the ground shall have a maximum vertical opening of 610 mm between the lowermost member of the barrier and the platform that it surrounds.)	-	0	NIL.
4.2 and A.4.2.(Barriers for platforms more than 1 000 mm above the ground shall be designed to minimize the likelihood of climbing. Openings within these barriers or between the barrier and the platform surface shall not permit the passage of the torso probe defined in 6.5.1)	-	0	NIL.
4.2 and A.4.2. and 4.6.2 and 4.6.3(For barriers with an uneven top design)	-	0	NIL.
4.2 and A.4.2. and 6.3(Dynamic strength of barriers and handrails)	-	2000	5% discount for BIS
4.3(Rung ladders, stepladders and stairways)	-	0	NIL.
4.3 a and Fig.10(The rung or tread shall have a substantial horizontal stepping surface with a lateral width of 240 mm or more)	-	0	NIL.
4.3 b and Fig.10(The distance between the upper surface of the rungs or treads on rung ladders or stepladders shall not be more than 310 mm and on stairways not more 230 mm when measured vertically in accordance with Figure 10.)	-	0	NIL.
4.3 c(The surface of the tread shall not be slippery)	-	0	NIL.
4.3 d(The diameter or cross-sectional dimension of the rungs on rung ladders)	-	0	NIL.
4.3.e(The depth of treads on stepladders with closed risers or stairways)	-	0	NIL.
4.3 f(The inclination of stairways)	-	0	NIL.
4.3 f(The inclination of stepladders)	-	0	NIL.
4.3 f(The inclination of rung ladders)	-	0	NIL.
4.3 g(Stairways and stepladders with a height of 1 200 mm or more above the ground shall be provided with a means of continuous hand support from a height of 760 mm)	-	0	NIL.
4.3 g(A means of continuous hand support from a height of 760 mm)	-	0	NIL.
4.4.1 (Head and neck entrapment)	-	2000	5% discount for BIS
4.4.2(Entrapment of clothing and hair)	-	2000	5% discount for BIS
4.4.3(Entrapment of feet)	-	2000	5% discount for BIS
4.4.4(Entrapment of fingers)	-	0	NIL.
4.5.1(Stability of activity toys other than slides, swings and toys with crossbeams - General)	-	2000	5% discount for BIS
4.5.2(Stability of activity toys with a free height of fall of 600 mm or less)	-	2000	5% discount for BIS
4.5.3(Stability of activity toys with a free height of fall of more than 600 mm)	-	2000	5% discount for BIS
4.6.1 and A.4.6.(Stability of slides)	-	2000	5% discount for BIS
4.6.2 a and A.4.6.(Retaining sides for slides -For slides with a height of more than 1 000 mm above the ground, the height, h, of the retaining sides shall be 100 mm or more)	-	0	NIL.
4.6.2 b and A.4.6.(Retaining sides for slides - For slides with a height of 1 000 mm or less above the ground, the height, h, of the retaining sides shall be 50 mm or more.)	-	0	NIL.
4.6.3 a and A.4.6.(Starting, sliding and run-out section on slides -The starting section for slides with a height of 1 000 mm or less above the ground shall have)	-	0	NIL.
4.6.3 a and A.4.6.(Starting, sliding and run-out section on slides -The starting section for slides with a height of 1 000 mm or less above the ground shall have)	-	0	NIL.
4.6.3 a and A.4.6.(Starting, sliding and run-out section on slides -The starting section for slides with a height of 1 000 mm or less above the ground shall have)	-	0	NIL.
4.6.3 b and A.4.6.(Starting, sliding and run-out section on slides-The starting section for slides with a height of more than 1 000 mm above the ground shall have)	-	0	NIL.
4.6.3 b and A.4.6.(Starting, sliding and run-out section on slides-The starting section for slides with a height of more than 1 000 mm above the ground shall have)	-	0	NIL.
4.6.3 b and A.4.6.(Starting, sliding and run-out section on slides-The starting section for slides with a height of more than 1 000 mm above the ground shall have)	-	0	NIL.
4.6.3 c and A.4.6.(Starting, sliding and run-out section on slides)	-	0	NIL.
4.6.3 d and A.4.6.(The angle of inclination to the horizontal of the sliding section)	-	0	NIL.
4.6.3 e and A.4.6.(The run-out section for the slide)	-	0	NIL.
4.6.3 e and A.4.6.(The run-out section for the slide)	-	0	NIL.
4.6.3 e and A.4.6.(The run-out section for the slide)	-	0	NIL.
4.6.3 f and A.4.6.(The finishing end of the run-out section shall have a radius of 25 mm or more through at least 90°)	-	0	NIL.
4.6.4 and A.4.6.(Roller slides)	-	0	NIL.
4.7.1.1 and A.4.7.(Stability of swings and other activity toys with crossbeams)	-	2000	5% discount for BIS
4.7.1.2 and A.4.7.(Swings with crossbeams more than 1 200 mm above the ground)	-	2000	5% discount for BIS
4.7.1.3 and A.4.7.(Swings intended for children under 36 months with crossbeams 1 200 mm or less above the ground)	-	2000	5% discount for BIS
4.7.2 and A.4.7.2(Strength of crossbeams, swing devices, suspension connectors and suspension couplings)	-	2000	5% discount for BIS
4.7.3.1(Swings intended for children under 36 months)	-	0	NIL.
4.7.3.2(Toddler swings without a crossbeam)	-	0	NIL.
4.8(Seesaws - The central point of the sitting or standing position of the seesaw shall not exceed a height)	-	0	NIL.
4.8(Seesaws - The sitting or standing position of the seesaw may swing out of the horizontal)	-	0	NIL.
4.8(Seesaws )	-	0	NIL.
4.9(Carousels and rocking toys)	-	0	NIL.
4.9(Free height of fall for carousels and rocking toys)	-	0	NIL.
4.10.1 and A.4.10(Inflatable activity toys - General)	-	0	NIL.
4.10.2 and A.4.10(Inflatable activity toys - Anchorage)	-	0	NIL.
4.10.3 and A.4.10(Connection tubes for continuous inflation)	-	0	NIL.
4.10.4.1 and A.4.10(Containment - General)	-	0	NIL.
4.10.4.2 and A.4.10(Platforms - Any platform intended for sitting or standing)	-	0	NIL.
4.10.4.2 and A.4.10(Containment walls with a minimum height )	-	0	NIL.
4.10.4.2 and A.4.10(Permanently roofed Containment walls)	-	0	NIL.
4.10.4.3 and A.4.10(Slopes shall be treated as a platform.)	-	0	NIL.
4.10.4.3 and A.4.10(The first metre at the top of slopes)	-	0	NIL.
4.10.4.3 and A.4.10(The remaining length of slopes greater than 30° that are 760 mm or more above the ground shall be provided with containing walls with a minimum height of 900 mm.)	-	0	NIL.
4.10.4.4 and A.4.10(Safe collapse)	-	0	NIL.
4.10.4.4 a and A.4.10(When tested in accordance with 6.9 the minimum time taken for the test load to reach its lowest point )	-	0	NIL.
4.10.4.4 b and A.4.10(the opening of any tunnel or squeeze point under any platform shall not be reduced in height by more than 50 % within 30 s.)	-	0	NIL.
4.11.1(Paddling pools - General)	-	1000	5% discount for BIS
4.11.2(Edges, points, and small parts)	-	1000	5% discount for BIS
4.11.3(Paddling pools with inflatable walls)	-	1000	5% discount for BIS
5.1(Labelling)	-	0	NIL.
5.2(Assembly and installation instructions)	-	0	NIL.
5.3(Maintenance instructions)	-	0	NIL.
5.4(Warnings)	-	0	NIL.
4.7.4(Impact from swing elements - swing elements shall not impart an average peak value of acceleration)	-	500	5% discount for BIS
4.7.4(Impact from swing elements - Average surface compression)	-	500	5% discount for BIS

19 Mar, 2026

-
-

IS 1554 : Part 1 (1988)

Specification for pvc insulated (Heavy Duty) electric cables: Part 1 for working voltages up to and including 1100 v (Third Revision)

PVC insulated (Heavy duty) electric cables

13500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1(INSULATION : General Purjose Insulaiion)	-	0	-
4.1.2(INSULATION : Heat Resisting Insulation)	-	0	-
5.1(MATERIALS : FILLER AND INNER SHEATH)	-	0	-
5.2(MATERIALS : FILLER AND INNER SHEATH)	-	0	-
6.1(MATERIALS : ARMGURING)	-	0	-
6.2(MATERIALS : ARMGURING)	-	0	-
7.1.1(OUTER SHEATH : For Cables with General Purpose InsuIafion)	-	0	-
7.1.2(OUTER SHEATH : For Cables with Heat Resisting InsuIalion)	-	0	-
8.1(CONSTRUCTION : CONDUCTOR)	-	0	-
8.2(CONSTRUCTION : CONDUCTOR)	-	0	-
9.1(INSULATION )	-	0	-
9.2(INSULATION : Thickness of Insulation)	-	300	5% discount for BIS
9.3(INSULATION :Tolerance on Thickness of Insulation)	-	0	-
9.4(INSULATION : Application of Insulation)	-	0	-
10.1(CORE IDENTIFICATION)	-	0	-
10.2(CORE IDENTIFICATION)	-	0	-
10.3(CORE IDENTIFICATION)	-	0	-
11.1(LAYING UP OF CORES)	-	0	-
11.2(LAYING UP OF CORES)	-	0	-
12.1(INNER SHEATH)	-	0	-
12.2(INNER SHEATH)	-	0	-
12.3(INNER SHEATH :Thickness of Inner Sheath)	-	300	5% discount for BIS
12.3.1(INNER SHEATH :Thickness of Inner Sheath)	-	300	5% discount for BIS
13.1.1(ARMOURING : Application)	-	0	-
13.1.2(Armouring: Coverage )	-	0	-
13.1.3(ARMOURING : Direction of lay )	-	0	-
13.1.4(ARMOURING : Application)	-	0	-
13.2(ARMOURING : Type of Armour)	-	0	-
13.2.1(ARMOURING : Type of Armour)	-	0	-
13.3(Armouring : Dimensions -Wire Diameter)	-	0	-
13.3(Armouring : Dimensions -Formed wire )	-	0	-
13.4(ARMOURING : Joints)	-	0	-
13.5.1(ARMOURING : Resistance)	-	500	5% discount for BIS
13.5.2(ARMOURING : Resistance)	-	500	5% discount for BIS
13.6 a)(ARMOURING: Tensile Strength)	-	500	5% discount for BIS
13.6 b)(ARMOURING: Elongation )	-	500	5% discount for BIS
13.6 c)(ARMOURING: Torsion Test (For round wire ) )	-	300	5% discount for BIS
13.6 d)(ARMOURING: Winding Test(For formed wire))	-	200	5% discount for BIS
13.6 e)(ARMOURING: Uniformity of zinc coating)	-	600	5% discount for BIS
13.6 f)(ARMOURING: Mass of zinc coating )	-	500	5% discount for BIS
13.6 g)(ARMOURING: Resistivity)	-	300	5% discount for BIS
14.1(OUTER SHEATH)	-	0	-
14.2(OUTER SHEATH)	-	0	-
14.3(OUTER SHEATH : Colour )	-	0	-
14.4.1(Thickness of Outer Sheath : Unarmowed Cables)	-	300	5% discount for BIS
14.4.2(Thickness of Outer Sheath : Armoured Cables)	-	300	5% discount for BIS
15.1 a) 1)(Tests on conductor : Annealing test ( for copper ))	-	500	5% discount for BIS
15.1 a) 2)(Tensile test (for aluminium) - Before stranding )	-	200	5% discount for BIS
15.1 a) 2)(Tensile test (for aluminium) - After stranding )	-	200	5% discount for BIS
15.1 a) 3)(Tests on conductor : Wrapping test ( for aluminium ))	-	100	5% discount for BIS
15.1 a) 4)(Tests on conductor : Conductor resistance test)	-	500	5% discount for BIS
15.1 a) 4)(Resistance test - Neutral conductor )	-	500	5% discount for BIS
15.1 d)1)(Phyaical tests for insulation : Tensile Test)	-	500	5% discount for BIS
15.1 d)1)(Phyaical tests for insulation : Elongation )	-	500	5% discount for BIS
15.1 d)1)(Physical tests for sheath : Tensile stregth )	-	500	5% discount for BIS
15.1 d)1)(Physical tests for sheath : Elongation )	-	500	5% discount for BIS
15.1 d)2)(Phyaical tests for insulation- Ageing in air Oven : Tensile Test)	-	500	5% discount for BIS
15.1 d)2)(Phyaical tests for insulation - Ageing in air oven : Elongation )	-	500	5% discount for BIS
15.1 d)2)(Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	500	5% discount for BIS
15.1 d)2)(Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-	500	5% discount for BIS
15.1 d)2)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-	500	5% discount for BIS
15.1 d)2)(Physical tests for outer sheath -Ageing in air oven : Elongation )	-	500	5% discount for BIS
15.1 d)2)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-	500	5% discount for BIS
15.1 d)2)(Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-	500	5% discount for BIS
15.1 d)3)(Phyaical tests for insulation : Shrinkage )	-	200	5% discount for BIS
15.1 d)3)(Phyaical tests for insulation : Shrinkage - Crack observed )	-	200	5% discount for BIS
15.1 d)3)(Phyaical tests for Sheath : Shrinkage )	-	200	5% discount for BIS
15.1 d)3)(Phyaical tests for Sheath : Shrinkage - Crack observed )	-	200	5% discount for BIS
15.1 d)4)(Hot deformation : Insulation )	-	400	5% discount for BIS
15.1 d)4)(Hot deformation : Sheath )	-	400	5% discount for BIS
15.1 d)5)( Loss of mass in air oven- Insulation )	-	800	5% discount for BIS
15.1 d)5)( Loss of mass in air oven- sheath )	-	800	5% discount for BIS
15.1 d)6)(Heat shock test- Insulation )	-	300	5% discount for BIS
15.1 d)6)(Heat shock test- sheath )	-	300	5% discount for BIS
15.1 d)7)(Thermal stability- insulation )	-	500	5% discount for BIS
15.1 d)7)(Thermal stability- Sheath )	-	500	5% discount for BIS
15.1 e)(Insulation resistance test : Volume Resistivity )	-	800	5% discount for BIS
15.1 e)(Insulation resistance test : IR Constant )	-	800	5% discount for BIS
15.1 f)(High voltage test ( water immersion test ))	-	800	5% discount for BIS
15.1 g)(High voltage test at room temperature)	-	800	5% discount for BIS
15.1 g)(High voltage test at room temperature)	-	800	5% discount for BIS
15.4 a)(Cold bend test- Insulation ( Optional test))	-	400	5% discount for BIS
15.4 a)(Cold bend test- Sheath ( Optional test))	-	400	5% discount for BIS
15.4 b)(Cold impact test- Insulation ( Optional test))	-	400	5% discount for BIS
15.4 b)(Cold impact test- Sheath ( Optional test))	-	400	5% discount for BIS
15.4 c)(Armour resistance test ( for other than mining cables ).- Optional test )	-	500	5% discount for BIS
16.1(DETAILS OF TESTS : General)	-	0	-
16.2(DETAILS OF TESTS : High Voltage Test at Room Temperature)	-	0	-
16.3.1(High Voltage Test ( Water Immersion Test ) : a.c. Test)	-	800	5% discount for BIS
16.3.2(High Voltage Test ( Water Immersion Test ) : d.c. Test)	-	800	5% discount for BIS
16.4(Flammability Test)	-	500	5% discount for BIS
16.5(Oxygen Index Test)	-	1000	5% discount for BIS
16.6(Flame Retardance Test on Single Cables)	-	1000	5% discount for BIS
16.7(Flame Retardance Test on Bunched Cables)	-	1200	5% discount for BIS
16.9(Test for Halogen Acid Gas Evolution)	-	900	5% discount for BIS
16.1(Temperature Index)	-	1000	5% discount for BIS
17.1(IDENTIFICATION : Manufacturer’s Identification)	-	0	-
17.2(IDENTIFICATION : Cable Identification)	-	0	-
17.2.1(IDENTIFICATION : Cable Identification)	-	0	-
17.3(IDENTIFICATION : Cable Code)	-	0	-

19 Mar, 2026

-
-

100

IS 694 (2010)

Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 450/750 v (Fourth Revision)

PVC Insulated Cables

6750 View breakup
Rs.4750/- for single core unsheathed cable,Rs.6750/-single core sheathed cable,Rs.4900/- for outdoor use,Rs.6675/- for low temperature condition,Rs.1000/-extra for each additional core. (5% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
13(Cable code)	-	0	-
11.2(Legibility)	-	0	-
11.1(Durability)	-	0	-
11(Identification)	-	0	-
10.9(Additional ageing test (OU cables only) -HV test (at 60±3oC))	-	300	5% discount for BIS
10.4(Flammability test- Unaffected portion)	-	700	5% discount for BIS
10.4(Flammability test-Burning after flame removal)	-	700	5% discount for BIS
table 1 e) 3) (IR constant- max. Temp)	-	300	5% discount for BIS
table 1 e) 3) (IR constant- Room temp )	-	300	5% discount for BIS
table 1 e) 3) (Volume Resistivity - Maximum temp)	-	300	5% discount for BIS
table 1 e) 3) (Volume Resistivity - Room temp )	-	300	5% discount for BIS
10.2(HV (room temperature))	-	300	5% discount for BIS
10.1(HV (water immersion))	-	300	5% discount for BIS
10.1(HV (water immersion))	-	300	5% discount for BIS
10.8(Smoke density rating)	-	200	5% discount for BIS
10.6(Halogen evolution)	-	250	5% discount for BIS
10.7(Temperature index)	-	300	5% discount for BIS
10.5(Oxygen index)	-	300	5% discount for BIS
Table 1 iii) d) 9)(Cold impact for sheath)	-	200	5% discount for BIS
Table 1 iii) c) 9)(Cold impact for insulation)	-	200	5% discount for BIS
Table 1 iii) d) 8)(Cold bend for sheath)	-	200	5% discount for BIS
Table 1 iii) c) 8)(Cold bend for insulation)	-	200	5% discount for BIS
Table 1(Category Code)	-	0	-
Table 1 iii) d) 7)(Thermal stability- Sheath )	-	200	5% discount for BIS
Table 1 iii) c) 7)(Thermal stability- Insulation )	-	200	5% discount for BIS
Table 1 iii) d) 6)(Hot deformation -Indentation depth - Sheath )	-	300	5% discount for BIS
Table 1 iii) c) 6)(Hot deformation - Indentation depth- Insulation)	-	300	5% discount for BIS
Table 1 iii) d) 5)(Heat shock-Sheath )	-	300	5% discount for BIS
Table 1 iii) c) 5)(Heat shock-Insulation )	-	300	5% discount for BIS
Table 1 iii) d) 4)(Cracks Observed)	-	0	-
Table 1 iii) d) 4)(Shrinkage- Sheath )	-	200	5% discount for BIS
Table 1 iii) c) 4)(Cracks Observed)	-	0	-
Table 1 iii) c) 4)(Shrinkage-Insulation)	-	200	5% discount for BIS
Table 1 iii) d) 2)(Loss of mass- Sheath )	-	300	5% discount for BIS
Table 1 iii) c) 2)(Loss of mass- Insulation )	-	300	5% discount for BIS
Table 1 iii) d) 3)(Sheath- Elongation variation)	-	400	5% discount for BIS
Table 1 iii) d) 3)(Sheath- TS variation)	-	400	5% discount for BIS
Table 1 iii) d) 3)(Sheath- Elongation (After ageing))	-	800	5% discount for BIS
Table 1 iii) d) 3)(Sheath- Tensile strength (After ageing))	-	800	5% discount for BIS
Table 1 iii) d) 1)(Sheath- Elongation (Without ageing))	-	400	5% discount for BIS
Table 1 iii) d) 1)(Sheath -Tensile strength (Without ageing))	-	400	5% discount for BIS
5.2(Application )	-	0	-
Table 1 iii) c) 3)(Elongation variation)	-	0	-
Table 1 iii) c) 3)(TS variation)	-	0	-
Table 1 iii) c) 3)(Elongation (After ageing))	-	800	5% discount for BIS
Table 1 iii) c) 3)(Tensile strength (After ageing))	-	800	5% discount for BIS
Table 1 iii) c) 1)(Elongation (Without ageing))	-	400	5% discount for BIS
Table 1 iii) c) 1)(Tensile strength (Without ageing))	-	400	5% discount for BIS
(Cl. 18.1.4) (Cl. 19.1.5) (Cl. 20.1.4) (Cl. 22.1.4)(Colour of Sheath)	-	0	-
8.3(Thickness of Sheath)	-	200	5% discount for BIS
5.3(Thickness of Insulation)	-	200	5% discount for BIS
9.1(Ovality)	-	200	5% discount for BIS
9(Overall dimensions)	-	200	5% discount for BIS
10.11(Per sulphate test (for tinned Cu cable only))	-	500	5% discount for BIS
4.2(Conductor resistance test)	-	300	5% discount for BIS
4.1(Wrapping test (for Al))	-	300	5% discount for BIS
4.1(Tensile test (for Al)- After Stranding)	-	400	5% discount for BIS
4.1(Tensile test (for Al)-Before Stranding)	-	400	5% discount for BIS
4.1(Annealing test (for copper))	-	300	5% discount for BIS
(Cl.6.1.3 of IS 8130:2013)(Flexible Conductors (Classes 5))	-	0	-
(Cl.6.1.3 of IS 8130:2013)( Flexible Conductors (Classes 5))	-	0	-
(Cl.6.1.3 of IS 8130:2013)(Stranded circular non compacted conductors(Class-2))	-	0	-
(Cl.6.1.3 of IS 8130:2013)(Stranded compacted circular conductors and shaped conductors (Class 2))	-	0	-
(Cl.6.1.3 of IS 8130:2013)(Stranded circular non compacted conductors (Class-2))	-	0	-
(Cl.6.1.3 of IS 8130:2013)(Stranded circular non compacted conductors (Class-2))	-	0	-
(Cl.6.1.3 of IS 8130:2013)(Solid Conductor (Class 1))	-	0	-
(Cl.6.1 of IS 8130:2013)(Solid Conductor (Class 1))	-	0	-
(Cl.6.1 of IS 8130:2013)(Solid Conductor (Class 1))	-	0	-
(Cl.16.1) (Cl.19.1)(Conductor- Diameter )	-	200	5% discount for BIS
(Cl.16.1) (Cl.19.1)(Conductor)	-	0	-
(Cl.16.1) (Cl.19.1)(Conductor)	-	0	-
(Cl.16.1) (Cl.19.1)(Conductor)	-	0	-
(Cl. 18.1.3) (Cl. 19.1.4) (Cl. 20.1.3) (Cl. 21.1.3) (Cl. 22.1.3)(Assembly of cores )	-	0	-
12(CONSTRUCTION Core Identification)	-	0	-
8.1(Sheath Material )	-	0	-
7(Binder Tape)	-	0	-
6.2(Filler)	-	0	-
6.1(Filler)	-	0	-
5.1(Insulation)	-	0	-
4.4(Joints in Conductor)	-	0	-
4.4(Joints in Conductor)	-	0	-

19 Mar, 2026

-
Included w.e.f 13.05.2020 Excluding -Copper Purity test

101

IS 13010 (2002)

AC watthour meters, class 0.5, 1 and 2 - Specification (First Revision)

87500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1 a)(Marking and Nameplates)	-	0	-
8.1 b)(Marking and Nameplates)	-	0	-
8.1 c)(Marking and Nameplates)	-	0	-
8.1 d)(Marking and Nameplates)	-	0	-
8.1 e)(Marking and Nameplates)	-	0	-
8.1 f)(Marking and Nameplates)	-	0	-
8.1 g)(Marking and Nameplates)	-	0	-
8.1 h)(Marking and Nameplates)	-	0	-
8.1 j)(Marking and Nameplates)	-	0	-
8.1 k)(Marking and Nameplates)	-	0	-
8.1 n)(Marking and Nameplates)	-	0	-
8.1 m)(Marking and Nameplates)	-	0	-
8.1.1(BIS Certlflcation Marking)	-	0	-
8.2.1(Connection Diagram and Terminal Marking)	-	0	-
8.2.2(Connection Diagram and Terminal Marking)	-	0	-
11.2(Insulation Resistance)	-	3000	5% discount for BIS
11.3(Running with No Load)	-	4000	5% discount for BIS
11.4(Starting)	-	4000	5% discount for BIS
11.5(Limits of Errors)	-	2500	5% discount for BIS
11.6(Tests of Meter Constant)	-	3000	5% discount for BIS
11.7( Interpretation of Test Results and Adjustment ( if Required ) )	-	3000	5% discount for BIS
11.8 a)(Power Loss : Voltage Circuits )	-	1500	5% discount for BIS
11.8 b)(Power Loss : Current Circuits )	-	1500	5% discount for BIS
11.9(Heating )	-	5000	5% discount for BIS
11.10.2(Impulse Voltage Test)	-	5000	5% discount for BIS
11.10.2.1(Tests of insulation for circuits and for insulation between the circuits )	-	2500	5% discount for BIS
11.10.2.2(Test of insulation of electric circuits relative to. earth )	-	2500	5% discount for BIS
11.10.3 (ac Voltage Test)	-	2500	5% discount for BIS
11.11 a)(Effect of Influence Quantities )	-	5000	5% discount for BIS
11.11 b)(Effect of Influence Quantities )	-	5000	5% discount for BIS
11.11 c)(Effect of Influence Quantities )	-	5000	5% discount for BIS
11.11 d)(Effect of Influence Quantities )	-	5000	5% discount for BIS
11.11 e)(Effect of Influence Quantities )	-	5000	5% discount for BIS
11.11 f)(Effect of Influence Quantities )	-	5000	5% discount for BIS
11.11 g)(Effect of Influence Quantities )	-	5000	5% discount for BIS
11.11 h)(Effect of Influence Quantities )	-	5000	5% discount for BIS
11.11 i)(Effect of Influence Quantities )	-	5000	5% discount for BIS
11.12(Short-Time Over Currents)	-	3000	5% discount for BIS
11.13(Effect of Self-Heating )	-	4000	5% discount for BIS
11.14(Range of Adjustment)	-	3000	5% discount for BIS
11.15.1 (low load adjustment)	-	1500	5% discount for BIS
11.15.2(Inductive Load Adjustment)	-	1500	5% discount for BIS
11.16.1( Sustained Accuracy Test)	-	3000	5% discount for BIS
11.17(Running at Low Load)	-	3000	5% discount for BIS
11.18(Test on Material Used in the Dial)	-	2500	5% discount for BIS
11.19(Repeatability of Error Test ( Type Test) )	-	1500	5% discount for BIS
11.20 a)(Vibration Test )	-	3250	5% discount for BIS
11.20 b)(Vibration Test )	-	3250	5% discount for BIS
11.20 c)(Vibration Test )	-	3250	5% discount for BIS
11.20 d)(Vibration Test )	-	3250	5% discount for BIS
11.20 e)(Vibration Test )	-	3250	5% discount for BIS
11.21(Shock Test)	-	3000	5% discount for BIS
11.22(Driving Torque Measurement Test”)	-	3000	5% discount for BIS
11.23(Test of Resistance to Heat and Fire)	-	5000	5% discount for BIS
11.24 a)(Protection against penetration of dust)	-	1000	5% discount for BIS
11.24 a)(Protection against penetration of dust)	-	1500	5% discount for BIS
11.24 a)(Protection against penetration of dust)	-	1500	5% discount for BIS
11.24 b)(Protection against penetration of water )	-	3500	5% discount for BIS
11.25(Mechanical Strength of Meter Case)	-	3000	5% discount for BIS

19 Mar, 2026

-
-

102

IS 15549 (2005)

Stationary valve regulated lead acid batteries - Specification

Stationary Valve Regulated Lead Acid (VRLA) Batteries.

220500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(Rating )	-	0	5% discount for BIS
7.2(Designation of Cells)	-	0	5% discount for BIS
7.3(Standard Cell Capacities)	-	0	5% discount for BIS
7.4(Information to be Furnished by Purchaser with Enquiry/Order)	-	0	5% discount for BIS
7.5(Information to be Furnished by the Battery Supplier)	-	0	5% discount for BIS
8(Markings on Cell)	-	500	5% discount for BIS
9(Temperature for Tests)	-	0	5% discount for BIS
12.1(Test for C 10 Capacity)	-	12500	5% discount for BIS
12.2(Test for C 1 Capacity)	-	17500	5% discount for BIS
12.3(Capacity Test at Other Discharge Rates)	-	22500	5% discount for BIS
12.4(Ampere Hour Efficiency)	-	7500	5% discount for BIS
12.5(Watt Hour Efficiency)	-	7500	5% discount for BIS
12.6(Test for Retention of Charge)	-	12500	5% discount for BIS
12.7 & Annex B(Test on Separators)	-	12500	5% discount for BIS
12.8(Test for Vent Seal Operation)	-	12500	5% discount for BIS
12.9 & Annex C(Test for Oxygen Recombination Efficiency)	-	15000	5% discount for BIS
12.1(Endurance Life Cycle Test)	-	100000	5% discount for BIS

19 Mar, 2026

-
-

103

IS 302 : Part 1 (2008)

Safety of household and similar electrical appliances: Part 1 general requirements (Sixth Revision)

Household & Similar Electrical Appliances

35000 View breakup
(5% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	250	5% discount for BIS
8.1.1(Protection against live parts in all positions)	-	750	5% discount for BIS
8.1.2(Protection against live parts in openings)	-	750	5% discount for BIS
8.1.3(Protection against live parts in visible glowing heating elements)	-	750	5% discount for BIS
8.1.4(Protection against live parts against protective impedance)	-	750	5% discount for BIS
10.1(Power input)	-	1500	5% discount for BIS
10.2(Current input)	-	1500	5% discount for BIS
11.1(General)	-	0	-
11.2(General)	-	3	-
11.3(Heating)	-	2000	5% discount for BIS
13.1(General)	-	0	-
13.2(Leakage current at operating temperature)	-	1500	5% discount for BIS
13.3(Electric Strength at operating temperature)	-	1500	5% discount for BIS
14(Transient Over Voltages)	-	2000	5% discount for BIS
15.0(General)	-	0	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	1500	5% discount for BIS
15.2(Spillage Test)	-	1500	5% discount for BIS
15.3(Humidity Test)	-	1500	5% discount for BIS
16.0(General)	-	0	-
16.1(General)	-	0	-
16.2(Leakage Current (after Clause 15))	-	1250	5% discount for BIS
16.3(Electric Strength (after clause 15 and 16.2))	-	1250	5% discount for BIS
17(Over Load Protection of Transformers and associated circuits)	-	250	5% discount for BIS
18(Endurance Test requirements and tests)	-	5000	5% discount for BIS
19(Abnormal Operation)	-	7500	5% discount for BIS
20(Stability test)	-	1000	5% discount for BIS
21(Mechanical Strength Test)	-	1250	5% discount for BIS
22(Construction verification related test)	-	2800	5% discount for BIS
23(General)	-	750	5% discount for BIS
24(Components)	-	0	-
25(Supply connection and external flexible cords)	-	500	5% discount for BIS
26(Terminals for external conductors)	-	1000	5% discount for BIS
27(Provision for earthing)	-	200	5% discount for BIS
28(Screw test and connections)	-	500	5% discount for BIS
29(clearance, creepage distances and solid insulation)	-	500	5% discount for BIS
30.1(Ball pressure test)	-	1250	5% discount for BIS
30.2(Glow Wire Test)	-	1250	5% discount for BIS
30.2(Needle Flame Test)	-	1250	5% discount for BIS
31(Resistance to Rusting)	-	1000	5% discount for BIS
32(Radiation Toxicity and Similar Hazards)	-	1500	5% discount for BIS

19 Mar, 2026

-
Excluding : cl.22.16 automatic cord reel, cl 22.32 test on ceramic materials cl.22.46 software, cl.24 components.

104

IS 302 : Part 2 : Sec 14 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 14 electric kitchen machines (First Revision)

Hand blender, Food processor, Food Mixers, Juicers Etc.

14200 View breakup
(5% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1 )	-	250	5% discount for BIS
7.1(Marking- IS 302-1)	-	250	5% discount for BIS
8( Protection Against Electric Shock, IS 302-1)	-	250	5% discount for BIS
10(Power Input and Current, IS 302-1)	-	250	5% discount for BIS
11(Heating, IS 302-1)	-	250	5% discount for BIS
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	250	5% discount for BIS
14(Transient Over Voltages, IS 302-1)	-	250	5% discount for BIS
15.1(Moisture Resistance, IS 302-1)	-	1000	5% discount for BIS
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	250	5% discount for BIS
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	500	5% discount for BIS
19.7(Abnormal Operation, IS 302-1)	-	2500	5% discount for BIS
20.1(Stability & Mechanical Hazards, IS 302-1)	-	500	5% discount for BIS
21.1(Mechanical Strength, IS 302-1)	-	500	5% discount for BIS
22(Construction, IS 302-1)	-	500	5% discount for BIS
23.1(Internal Wiring, IS 302-1)	-	500	5% discount for BIS
24.1(Components, IS 302-1)	-	0	5% discount for BIS
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	500	5% discount for BIS
26(Terminals for External Conductors, IS 302-1)	-	500	5% discount for BIS
27(Provision for Earthing, IS 302-1)	-	200	5% discount for BIS
28(Screws & Connections, IS 302-1)	-	500	5% discount for BIS
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	500	5% discount for BIS
30.1(Resistance to Heat and Fire, IS 302-1)	-	500	5% discount for BIS
31(Resistance of Rusting, IS 302-1)	-	500	5% discount for BIS
32(Radiation, Toxicity and similar Hazard IS 302-1)	-	500	5% discount for BIS
7.3(Marking- IS 302-1)	-	250	5% discount for BIS
7.4(Marking- IS 302-1)	-	250	5% discount for BIS
7.6(Marking- IS 302-1)	-	250	5% discount for BIS
7.7(Marking- IS 302-1)	-	250	5% discount for BIS
7.8(Marking- IS 302-1)	-	250	5% discount for BIS
7.11(Marking- IS 302-1)	-	250	5% discount for BIS
7.12(Marking- IS 302-1)	-	250	5% discount for BIS
7.13(Marking- IS 302-1)	-	250	5% discount for BIS
7.14(Marking- IS 302-1)	-	250	5% discount for BIS
7.15(Marking- IS 302-1)	-	250	5% discount for BIS
7.101(Marking)	-	250	5% discount for BIS
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	250	5% discount for BIS
15(Moisture Resistance, IS 302-1)	-	1000	5% discount for BIS
15.2(Moisture Resistance, IS 302-1)	-	1000	5% discount for BIS
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	250	5% discount for BIS
19.1(Abnormal Operation, IS 302-1)	-	2500	5% discount for BIS
19.8(Abnormal Operation, IS 302-1)	-	2500	5% discount for BIS
19.9(Abnormal Operation, IS 302-1)	-	2500	5% discount for BIS
19.101(Abnormal Operation)	-	2500	5% discount for BIS
20.2(Stability & Mechanical Hazards, IS 302-1)	-	500	5% discount for BIS
20.101(Stability & Mechanical Hazards)	-	500	5% discount for BIS
20.102(Stability & Mechanical Hazards)	-	500	5% discount for BIS
20.103(Stability & Mechanical Hazards)	-	500	5% discount for BIS
20.104(Stability & Mechanical Hazards)	-	500	5% discount for BIS
20.105(Stability & Mechanical Hazards)	-	500	5% discount for BIS
20.106(Stability & Mechanical Hazards)	-	500	5% discount for BIS
20.107(Stability & Mechanical Hazards)	-	500	5% discount for BIS
20.108(Stability & Mechanical Hazards)	-	500	5% discount for BIS
20.109(Stability & Mechanical Hazards)	-	500	5% discount for BIS
20.110(Stability & Mechanical Hazards)	-	500	5% discount for BIS
20.111(Stability & Mechanical Hazards)	-	500	5% discount for BIS
20.112(Stability & Mechanical Hazards)	-	500	5% discount for BIS
20.113(Stability & Mechanical Hazards)	-	500	5% discount for BIS
20.114(Stability & Mechanical Hazards)	-	500	5% discount for BIS
20.115(Stability & Mechanical Hazards)	-	500	5% discount for BIS
20.116(Stability & Mechanical Hazards)	-	500	5% discount for BIS
21.2(Mechanical Strength, IS 302-1)	-	500	5% discount for BIS
22.102(Construction)	-	500	5% discount for BIS
23.2(Internal Wiring, IS 302-1)	-	500	5% discount for BIS
23.3(Internal Wiring, IS 302-1)	-	500	5% discount for BIS
23.4(Internal Wiring, IS 302-1)	-	500	5% discount for BIS
23.5(Internal Wiring, IS 302-1)	-	500	5% discount for BIS
23.6(Internal Wiring, IS 302-1)	-	500	5% discount for BIS
23.7(Internal Wiring, IS 302-1)	-	500	5% discount for BIS
23.8(Internal Wiring, IS 302-1)	-	500	5% discount for BIS
23.9(Internal Wiring, IS 302-1)	-	500	5% discount for BIS
23.10(Internal Wiring, IS 302-1)	-	500	5% discount for BIS
24.2(Components, IS 302-1)	-	0	-
24.5(Components, IS 302-1)	-	0	-
24.6(Components, IS 302-1)	-	0	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	500	5% discount for BIS
27.2(Provision for Earthing, IS 302-1)	-	200	5% discount for BIS
27.3(Provision for Earthing, IS 302-1)	-	200	5% discount for BIS
27.4(Provision for Earthing, IS 302-1)	-	200	5% discount for BIS
27.5(Provision for Earthing, IS 302-1)	-	200	5% discount for BIS
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	500	5% discount for BIS
30.2(Resistance to Heat and Fire, IS 302-1)	-	500	5% discount for BIS

19 Mar, 2026

-
Only for Blenders, Centrifugal juicers Excluding : cl.22.16 automatic cord reel, cl 22.32 test on ceramic materials cl.22.46 software, cl.24 components.

105

IS 13252 : Part 1 (2010)

Information technology equipment - Safety: Part 1 general requirements (Second Revision)

Information Technology Equipment

38500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1.5(Components)	-	2000	5% discount for BIS
1.6(Power interface .)	-	4000	5% discount for BIS
1.7(Markings and instructions)	-	2000	5% discount for BIS
2.1(Protection from electric shock and energy hazards)	-	500	5% discount for BIS
2.2(SELV circuits)	-	500	5% discount for BIS
2.3(TNV circuits)	-	500	5% discount for BIS
2.4(Limited current circuits)	-	500	5% discount for BIS
2.5(Limited power sources .)	-	500	5% discount for BIS
2.6(Provisions for earthing and bonding)	-	500	5% discount for BIS
2.7(Overcurrent and earth fault protection in primary circuits)	-	500	5% discount for BIS
2.8(Safety interlocks)	-	500	5% discount for BIS
2.9(Electrical insulation)	-	500	5% discount for BIS
2.10(Clearances, creepage distances and distances through insulation)	-	500	5% discount for BIS
3.1(General)	-	1000	5% discount for BIS
3.2(Connection to a mains supply)	-	1000	5% discount for BIS
3.3(Wiring terminals for connection of external conductors)	-	1000	5% discount for BIS
3.4(Disconnection from the mains supply)	-	1000	5% discount for BIS
3.5(Interconnection of equipment)	-	1000	5% discount for BIS
4.1(Stability)	-	2000	5% discount for BIS
4.2(Mechanical strength)	-	1000	5% discount for BIS
4.3(Design and construction)	-	1000	5% discount for BIS
4.4(Protection against hazardous moving parts)	-	1000	5% discount for BIS
4.5(Thermal requirements)	-	1000	5% discount for BIS
4.6(Openings in enclosures)	-	1000	5% discount for BIS
4.7(Resistance to fire)	-	1000	5% discount for BIS
5.1(Touch current and protective conductor curren)	-	2000	5% discount for BIS
5.2(Electric strength)	-	1000	5% discount for BIS
5.3(Abnormal operating and fault conditions)	-	2000	5% discount for BIS
6.1(Protection of telecommunication network service persons, and users of other equipment connected to the network, from hazards in the equipment)	-	1000	5% discount for BIS
6.2(Protection of equipment users from overvoltages on networks telecommunication)	-	2000	5% discount for BIS
6.3(Protection of the telecommunication wiring system from overheating)	-	2000	5% discount for BIS
7.1(General)	-	500	5% discount for BIS
7.2(Protection of cable distribution system service persons, and users of other equipment connected to the system, from hazardous voltages in the equipment)	-	500	5% discount for BIS
7.3(Protection of equipment users from overvoltages on the cable distribution system)	-	500	5% discount for BIS
7.4(Insulation between primary circuits and cable distribution systems)	-	1000	5% discount for BIS

19 Mar, 2026

-
-

106

IS 14286 (2010)

Crystalline silicon terrestrial photovoltaic (PV) modules - Design qualification and type approval (First Revision)

Crystalline Silicon Terrestrial Photovoltaic Module

700000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Marking)	-	0	NA
10.1(Visual inspection)	-	2000	5% discount for BIS
10.2(Maximum power determination)	-	5000	5% discount for BIS
10.3(Insulation test)	-	3000	5% discount for BIS
10.4(Measurement of temperature coefficients)	-	10000	5% discount for BIS
10.5(Measurement of NOCT)	-	5000	5% discount for BIS
10.6(Performance at STC and NOCT)	-	9000	5% discount for BIS
10.7(Performance at low irradiance)	-	5000	5% discount for BIS
10.8(Outdoor exposure test)	-	8000	5% discount for BIS
10.9(Hot-spot endurance test)	-	10000	5% discount for BIS
10.10(UV preconditioning)	-	55000	5% discount for BIS
10.11(Thermal cycling test)	-	255000	5% discount for BIS
10.12(Humidity freeze test)	-	95000	5% discount for BIS
10.13(Damp heat test)	-	200000	5% discount for BIS
10.14(Robustness of termination test)	-	5000	5% discount for BIS
10.15(Wet leakage current test)	-	6000	5% discount for BIS
10.16(Mechanical load test)	-	12000	5% discount for BIS
10.17(Hail test)	-	8000	5% discount for BIS
10.18(Bypass diode thermal' test)	-	7000	5% discount for BIS

19 Mar, 2026

-
-

107

IS 15884 (2010)

Alternating current direct connected static prepayment meters for active energy (Class 1 And 2) - Specification

253500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1(By Inspection)	-	0	-
4.1.2(By Inspection)	-	0	-
4.1.3(By Inspection)	-	0	-
4.1.4(By Inspection)	-	0	-
4.2(Mechanical Requirements)	-	0	-
4.2.1(By Inspection)	-	0	-
4.2.2(By Inspection)	-	0	-
4.2.3(By Inspection)	-	0	-
4.2.4(IS 13360 (Part 6/Sec 17) for a temperature of 135°C and a pressure of 1.8 MPa (Method A).)	-	1000	5% discount for BIS
4.2.4(By Inspection)	-	1000	5% discount for BIS
4.2.4(By inserting copper conductor of appropriate size)	-	1000	5% discount for BIS
4.2.5(shall have a separate cover which can be sealed independently of the meter cover. The terminal cover shall enclose the actual terminals)	-	0	-
4.2.5(The terminals their fixing screws, a suitable length of external insulated conductor and its insulation shall be enclosed by a cover with a provision for sealing. )	-	0	-
4.2.5(The fixing screws used on the terminal cover for fixing and sealing shall be held captive in the terminal cover.)	-	0	-
4.2.5(When the meter is mounted on the meter board, no access to the terminals shall be possible without breaking the seal of the terminal cover.)	-	0	-
4.2.6(By measurement)	-	1500	5% discount for BIS
4.2.7(Standard test fingure)	-	0	-
4.2.10(Display of measured values)	-	3000	5% discount for BIS
4.2.10.1(By inspection)	-	3000	5% discount for BIS
4.2.10.2(By inspection)	-	3000	5% discount for BIS
4.2.10.3(By measurement)	-	3000	5% discount for BIS
4.2.10.4(By inspection)	-	3000	5% discount for BIS
4.2.10.5(By inspection)	-	3000	5% discount for BIS
4.2.10.6(By inspection)	-	3000	5% discount for BIS
4.2.10.7(By inspection)	-	3000	5% discount for BIS
4.2.10.8(Fig. 4, annexure F)	-	3000	5% discount for BIS
4.2.10.9(Fig. 5, annexure F)	-	3000	5% discount for BIS
4.2.11(By inspection)	-	0	-
4.2.11.1(By inspection)	-	0	-
5.4.6(As per IS 2071 (Part1))	-	17500	5% discount for BIS
5.4.6.2(6 KV, As per cl 12.7.6.2 of IS 13779)	-	17500	5% discount for BIS
5.4.6.2(12.7.6.2 of IS 13779)	-	17500	5% discount for BIS
5.4.6.3(Table 15, power source 500 VA)	-	17500	5% discount for BIS
5.4.6.4(500±50V dc)	-	17500	5% discount for BIS
5.6(As per cl 4.6)	-	12500	5% discount for BIS
5.6.4(As per cl 4.6.3, Table 13)	-	12500	5% discount for BIS
5.6.3(I= open circuit V= 115% of rated voltage test period 60 000/k minutes)	-	12500	5% discount for BIS
5.6.7(Test shall be carried out at 0.05Ib and Ib at UPF load under reference conditions. Twenty error samples shall be taken at time-intervals of 30 minutes)	-	12500	5% discount for BIS
4.6.2(As per table 12)	-	12500	5% discount for BIS
5.4(As per 5.6.1)	-	10000	5% discount for BIS
5.4.1(As per 4.4.1.1)	-	10000	5% discount for BIS
4.4.2(Table 7)	-	10000	5% discount for BIS
5.4.2(As per 4.4.2.1)	-	10000	5% discount for BIS
5.4.3(Table 8, as per cl4.4.3)	-	12500	5% discount for BIS
5.4.4(Table 9, and cl 4.4.4)	-	12500	5% discount for BIS
5.4.5(As per cl 4.4.5)	-	12500	5% discount for BIS
5.5(Test of electromagnetic compatibility)	-	65000	5% discount for BIS
5.5.5(according to IEC 62052-11)	-	65000	5% discount for BIS
5.5.4(according to IS 14700 (Part 4/Sec 4))	-	65000	5% discount for BIS
5.5.2(the load switch shall not operate during the tests.)	-	65000	5% discount for BIS
5.5.2(according to IS 14700 (Part 4/Sec 2))	-	65000	5% discount for BIS
5.5.6(Surge Immunity Test)	-	65000	5% discount for BIS
5.5.6(according to IEC 61000- 4-5)	-	65000	5% discount for BIS
5.3(Tests of Climatic Influences)	-	22500	5% discount for BIS
5.3.1(according to IS 9000 (Part 3/ Sec 1 to 5))	-	22500	5% discount for BIS
5.3.2(according to IS 9000 (Part 2/Sec 1 to 4))	-	22500	5% discount for BIS
5.3.3(according to IS 9000 (Part 5/Sec 1 and 2))	-	22500	5% discount for BIS
5.3.3(As per cl 5.4.6)	-	22500	5% discount for BIS
5.3.3(Visual examination)	-	0	5% discount for BIS
5.2(Test of mechanical requirements)	-	17500	5% discount for BIS
5.2.3(As per IS 9000 (Part 8))	-	17500	5% discount for BIS
5.2.2(As per IS 9000 (Part 7/Sec 1))	-	17500	5% discount for BIS
5.2.1(As per cl 12.3.3 of IS 13779)	-	17500	5% discount for BIS
5.2.5(Protection against penetration of dust (IP5X))	-	17500	5% discount for BIS
5.2.5(As per IS 12063)	-	17500	5% discount for BIS
5.2.5(500 V dc)	-	17500	5% discount for BIS
5.2.5(Protection against penetration of water (IP1X))	-	17500	5% discount for BIS
5.2.5(As per IS 12063)	-	17500	5% discount for BIS
5.2.5(500 V dc)	-	17500	5% discount for BIS
5.2.4(As per IS 11000 (Part 2 / Sec1))	-	5000	5% discount for BIS
4.6.3(Limits of error due to Ambient temperature Variation)	-	12500	5% discount for BIS
4.6.6.2.2(Performance requirement for load switching Utilization category UC2 (Annex G.))	-	5000	5% discount for BIS
4.6.6.2 , annexure G -7(Performance requirements for Prepayment Meters with Load switching utilization category UC2 and UC3)	-	5000	5% discount for BIS
4.6.6.2 , annexure G -6(Performance requirements for Prepayment Meters with Load switching utilization category UC2 and UC3)	-	5000	5% discount for BIS
4.6.6.2 , annexure G -5(Performance requirements for Prepayment Meters with Load switching utilization category UC2 and UC3)	-	5000	5% discount for BIS
4.6.6.2 , annexure G -4(Performance requirements for Prepayment Meters with Load switching utilization category UC2 and UC3)	-	5000	5% discount for BIS
4.6.6.2 , annexure G -3(Performance requirements for Prepayment Meters with Load switching utilization category UC2 and UC3)	-	5000	5% discount for BIS
4.6.6.2 , annexure G -2(Performance requirements for Prepayment Meters with Load switching utilization category UC2 and UC3)	-	5000	5% discount for BIS
4.6.6.2 .1(Load switching capability)	-	5000	5% discount for BIS
4.6.6.1 , annexure D - 4.3(Test of crystal Controlled Clocks in Payment Meters)	-	5000	5% discount for BIS
4.6.6.1 , annexure D - 4.2(Test of crystal Controlled Clocks in Payment Meters)	-	5000	5% discount for BIS
4.6.6.1 , annexure D - 4.1(Test of crystal Controlled Clocks in Payment Meters)	-	5000	5% discount for BIS
4.6.6.1 , annexure D - 3.2.3(Test of crystal Controlled Clocks in Payment Meters)	-	5000	5% discount for BIS
4.6.6.1 ,annexure D - 3.2.2(Test of crystal Controlled Clocks in Payment Meters)	-	5000	5% discount for BIS
4.6.6.1 ,annexure D - 3.2.1(Test of crystal Controlled Clocks in Payment Meters)	-	5000	5% discount for BIS
4.2.12(Test on Token Carrier Interface)	-	3000	5% discount for BIS
3.12.6, 4.6.6.2.1 & 5.1.7(Load Switching Capability (UC1))	-	5000	5% discount for BIS
4.6.6.2.2 & G2(Normal operation)	-	5000	5% discount for BIS
4.6.6.2.2 & G3(Electrical endurance)	-	5000	5% discount for BIS
4.6.6.2.2 & G4(Line to load voltage surge withstand)	-	5000	5% discount for BIS
4.6.6.2.2 & G5(Fault current making capacity)	-	5000	5% discount for BIS
4.6.6.2.2 & G6(Short circuit current carrying capacity)	-	5000	5% discount for BIS
4.6.6.2.2 & G7(Minimum switched current)	-	5000	5% discount for BIS
4.6.6.2.2 & G8(Dielectric strength)	-	5000	5% discount for BIS
4.6.1(As per table 10 & 11, cl 5.6.1)	-	12500	5% discount for BIS
5.6.5(As per cl 4.6.5)	-	12500	5% discount for BIS
5.8(Test of Load Switch)	-	5000	5% discount for BIS
5.9(Test of Consumption-Based charging function)	-	7500	5% discount for BIS
5.10(Test of Time-Based charging function)	-	7500	5% discount for BIS
4.2.10.8(General requirements- Mechanical and electrical characteristics)	-	3000	5% discount for BIS
4.2.10.9(General requirements- Optical characteristics)	-	3000	5% discount for BIS
4.2.12.3(Keypad Interface)	-	3000	5% discount for BIS
6(Functional Requirements)	-	10000	5% discount for BIS
Annexure A(Functional Performance)	-	10000	5% discount for BIS
5.5.3(Table 12 & IS 14700 (Part 4/Sec 3))	-	65000	5% discount for BIS

19 Mar, 2026

-
-

108

IS 10322 : Part 5 : Sec 1 (2012)

Luminaires: Part 5 particular requirements: Sec 1 fixed general purpose luminaires (First Revision)

Fixed General Purpose LED Luminaires

24500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	0	-
5(Classification of Luminaires')	-	0	-
6.0(Marking)	-	500	5% discount for BIS
7.0(Construction)	-	500	5% discount for BIS
8.0(Creepage Distance and Clearances)	-	500	5% discount for BIS
9.0(Provision for earthing)	-	500	5% discount for BIS
10.0(Terminals)	-	1000	5% discount for BIS
11.0(External & Internal Wiring)	-	1000	5% discount for BIS
12.0(Protection against electric shock)	-	3000	5% discount for BIS
13.0(Endurance Tests and Thermal Tests)	-	4000	5% discount for BIS
14.0(Resistance to Dust & Moisture)	-	3000	5% discount for BIS
15.0(Insulation Resistance and Electric Strength)	-	2500	5% discount for BIS
16.0(Resistance to Heat , fire and tracking)	-	500	5% discount for BIS
17.0(Photometric Test)	-	7500	5% discount for BIS

19 Mar, 2026

-
Excluding tests (cl.4.11.6 )Electromechanical contact systems) ,(cl. 4.24) UV Radiation for metal halide lamps)

109

IS 10322 : Part 5 : Sec 2 (2012)

Luminaires: Part 5 particular requirements: Sec 2 recessed luminaires (First Revision)

Recessed LED Luminaires

27500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	0	-
5(Classification of Luminaires')	-	0	-
6(Marking)	-	250	5% discount for BIS
7(Construction)	-	500	5% discount for BIS
8(Creepage Distance and Clearances)	-	500	5% discount for BIS
9(Provision for earthing)	-	500	5% discount for BIS
10(Terminals)	-	500	5% discount for BIS
11(External & Internal Wiring)	-	1000	5% discount for BIS
12(Protection against electric shock)	-	1500	5% discount for BIS
13(Endurance Tests and Thermal Tests)	-	5000	5% discount for BIS
14(Resistance to Dust and Moisture)	-	3000	5% discount for BIS
15(Insulation Resistance and Electric Strength)	-	3000	5% discount for BIS
16(Resistance to Heat , fire and tracking)	-	4000	5% discount for BIS
17(Photometric Test)	-	7750	5% discount for BIS

19 Mar, 2026

-
-

110

IS 10322 : PART 5 : SEC 3 (2012)

Luminaires: Part 5 particular requirements: Sec 3 luminaires for road and street lighting (First Revision)

Luminaires for Road and Street Lighting

27500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	0	-
5(Classification of Luminaires')	-	0	-
6.0(Marking)	-	500	5% discount for BIS
7.0(Construction)	-	500	5% discount for BIS
8.0(Creepage Distance and Clearances)	-	500	5% discount for BIS
9.0(Provision for earthing)	-	500	5% discount for BIS
10.0(Terminals)	-	500	5% discount for BIS
11.0(External & Internal Wiring)	-	1000	5% discount for BIS
12.0(Protection against electric shock)	-	1000	5% discount for BIS
13.0(Endurance Tests and Thermal Tests)	-	7500	5% discount for BIS
14.0(Resistance to Dust & Moisture)	-	4000	5% discount for BIS
15.0(Insulation Resistance and Electric Strength)	-	1500	5% discount for BIS
16.0(Resistance to Heat , fire and tracking)	-	2500	5% discount for BIS
17.0(Photometric Test)	-	7500	5% discount for BIS

19 Mar, 2026

-
-

111

IS 15885 : Part 2 : Sec 13 (2012)

Safety of lamp controlgear: Part 2 particular requirements: Sec 13 d.c. or a.c. supplied electronic controlgear for led modules

DC or AC Supplied Electronic Controlgear for LED Module

29500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	500	5% discount for BIS
8(Protection against accidental contact with live parts)	-	1000	5% discount for BIS
9(Terminals)	-	2500	5% discount for BIS
10(PROVISION FOR EARTHING)	-	1000	5% discount for BIS
11(MOISTURE RESISTANCE)	-	3500	5% discount for BIS
12(Electric Strength)	-	2000	5% discount for BIS
13(Thermal endurance test for winding of ballasts)	-	3500	5% discount for BIS
14(Fault conditions)	-	1000	5% discount for BIS
15(Transformer heating)	-	2500	5% discount for BIS
16(Construction)	-	1000	5% discount for BIS
17(Creepage distance and clearances)	-	2000	5% discount for BIS
18(Screws, current carrying parts and connections)	-	2500	5% discount for BIS
19(Resistance to heat, fire and tracking)	-	3500	5% discount for BIS
20(Resistance to corrosion)	-	3000	5% discount for BIS

19 Mar, 2026

-
-

112

IS 16102 : Part 1 (2012)

Self - Ballasted led lamps for general lighting services: Part 1 safety requirements

Self-Ballasted LED Lamps for General Lighting Services

24000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking)	-	500	5% discount for BIS
6(Interchangeability)	-	1500	5% discount for BIS
7(Protection against accidental contact with live parts)	-	1500	5% discount for BIS
8(Insulation Resistance and Electric Strength)	-	4000	5% discount for BIS
9(MECHANICAL STRENGTH)	-	4000	5% discount for BIS
10(cap temperature)	-	2000	5% discount for BIS
11(Resistance to Heat)	-	3000	5% discount for BIS
12(Resistance to Flame and Ignition)	-	4000	5% discount for BIS
13(Fault conditions)	-	3000	5% discount for BIS
14(Creepage distance and clearances)	-	500	5% discount for BIS

19 Mar, 2026

-
-

113

IS 16103 : Part 2 (2012)

Led modules for general lighting: Part 2 performance requirements

LED Modules for General Lighting

88000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Dimensions)	-	1000	5% discount for BIS
7(Module Power)	-	2500	5% discount for BIS
8(Light Output)	-	10000	5% discount for BIS
9(Chromaticity Coordinates, Correlated colour temperature and colour rendering)	-	10000	5% discount for BIS
10(LED Module Life)	-	43000	5% discount for BIS
12(Information for Luminaire design)	-	1000	5% discount for BIS
13(Test for Emission (Radiated and Conducted) of radio frequency distribution)	-	20000	5% discount for BIS

19 Mar, 2026

-
-

114

IS 16104 (2012)

D.C. or A.C. supplied electronic control gear for led modules - Performance requirements

A.C or D.C Supplied Electronic Controlgear

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Classification)	-	250	5% discount for BIS
6(Marking)	-	250	5% discount for BIS
7.2(Output voltage and Current)	-	2000	5% discount for BIS
7.3(Capacitive Load Requirement)	-	5000	5% discount for BIS
7.4(Voltage surge during switching and operation)	-	7500	5% discount for BIS
8(Total Circuit Power)	-	5000	5% discount for BIS
9(Circuit Power Factor)	-	5000	5% discount for BIS
10(Supply Current)	-	5000	5% discount for BIS
12(Operational test for abnormal conditions)	-	5000	5% discount for BIS
13(Endurance)	-	10000	5% discount for BIS

19 Mar, 2026

-
-

115

IS 16107 : Part 1 (2012)

Luminaires performance: Part 1 general requirements

Luminaires

48500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2(Photometric and Electrical Data)	-	48500		5% discount for BIS

19 Mar, 2026

-
-

116

IS 10322 : Part 5 : Sec 5 (2013)

Luminaires: Part 5 particular requirements: Sec 5 floodlights (First Revision)

LED Flood Lights

32500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	0	-
5(Classification of Luminaires')	-	0	-
6.0(Marking)	-	500	5% discount for BIS
7.0(Construction)	-	1000	5% discount for BIS
8.0(Creepage Distance and Clearances)	-	500	5% discount for BIS
9.0(Provision for earthing)	-	500	5% discount for BIS
10.0(Terminals)	-	1000	5% discount for BIS
11.0(External & Internal Wiring)	-	1500	5% discount for BIS
12.0(Protection against electric shock)	-	2000	5% discount for BIS
13.0(Endurance Tests and Thermal Tests)	-	4000	5% discount for BIS
14.0(Resistance to Dust & Moisture)	-	5000	5% discount for BIS
15.0(Insulation Resistance and Electric Strength)	-	5000	5% discount for BIS
16.0(Resistance to Heat , fire and tracking)	-	4000	5% discount for BIS
17.0(Photometric Test)	-	7500	5% discount for BIS

19 Mar, 2026

-
-

117

IS 10322 : Part 5 : Sec 6 (2013)

Luminaires: Part 5 particular requirements: Sec 6 handlamps

LED Hand Lamps

42500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	0	-
5(Classification of Luminaires')	-	0	-
6.0(Marking)	-	500	5% discount for BIS
7.0(Construction)	-	2500	5% discount for BIS
8.0(Creepage Distance and Clearances)	-	120	5% discount for BIS
9.0(Provision for earthing)	-	1200	5% discount for BIS
10.0(Terminals)	-	1500	5% discount for BIS
11.0(External & Internal Wiring)	-	1100	5% discount for BIS
12.0(Protection against electric shock)	-	1000	5% discount for BIS
13.0(Endurance Tests and Thermal Tests)	-	10500	5% discount for BIS
14.0(Resistance to Dust & Moisture)	-	10000	5% discount for BIS
15.0(Insulation Resistance and Electric Strength)	-	8000	5% discount for BIS
16.0(Resistance to Heat , fire and tracking)	-	5000	5% discount for BIS

19 Mar, 2026

-
Included w.e.f. 10-10-2017

118

IS 16077 (2013)

Thin - Film terrestrial photovoltaic (PV) modules - Design qualification and type approval

THIN-FILM TERRESTRIAL PHOTOVOLTAIC (PV) MODULES

805000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Marking)	-	0	N/A
10.1(Visual inspection)	-	7500	5% discount for BIS
10.2(Maximum power determination)	-	12500	5% discount for BIS
10.3(Insulation test)	-	15000	5% discount for BIS
10.4(Measurement of temperature coefficients)	-	55000	5% discount for BIS
10.5(Measurement of NOCT)	-	55000	5% discount for BIS
10.6(Performance at STC and NOCT)	-	60000	5% discount for BIS
10.7(Performance at low irradiance)	-	60000	5% discount for BIS
10.8(Outdoor exposure test)	-	32500	5% discount for BIS
10.9(Hot-spot endurance test)	-	85000	5% discount for BIS
10.10(UV preconditioning)	-	47500	5% discount for BIS
10.11(Thermal cycling test)	-	65000	5% discount for BIS
10.12(Humidity freeze test)	-	62500	5% discount for BIS
10.13(Damp heat test)	-	45000	5% discount for BIS
10.14(Robustness of termination test)	-	20000	5% discount for BIS
10.15(Wet leakage current test)	-	25000	5% discount for BIS
10.16(Mechanical load test)	-	27500	5% discount for BIS
10.17(Hail test)	-	60000	5% discount for BIS
10.18(Bypass diode thermal' test)	-	27500	5% discount for BIS
10.19(Light Soaking)	-	42500	5% discount for BIS

19 Mar, 2026

-
-

119

IS 302 : Part 2 : Sec 25 (2014)

Safety of household and similar electrical appliances: Part 2 Particular requirements: Section 25 Microwave ovens

Microwave ovens

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	250	5% discount for BIS
7(Marking and instructions)	-	250	5% discount for BIS
8(Protection against live parts)	-	250	5% discount for BIS
10(POWER INPUT AND CURRENT)	-	500	5% discount for BIS
11(HEATING)	-	500	5% discount for BIS
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	500	5% discount for BIS
14(IMPULSE VOLTAGE TEST)	-	500	5% discount for BIS
15(HUMIDITY TREATMENT TEST)	-	2000	5% discount for BIS
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	500	5% discount for BIS
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	1000	5% discount for BIS
18(ENDURANCE)	-	5500	5% discount for BIS
19(ABNORMAL OPERATION)	-	12500	5% discount for BIS
20(STABILITY AND MECHANICAL HAZARDS)	-	550	5% discount for BIS
21(MECHANICAL STRENGTH)	-	1000	5% discount for BIS
22(CONSTRUCTION)	-	2000	5% discount for BIS
23(INTERNAL WIRING)	-	1000	5% discount for BIS
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	500	5% discount for BIS
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	500	5% discount for BIS
27(PROVISION FOR EARTHING)	-	200	5% discount for BIS
28(SCREWS AND CONNECTIONS)	-	500	5% discount for BIS
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	500	5% discount for BIS
30(RESISTANCE TO HEAT AND FIRE)	-	1250	5% discount for BIS
31(RESISTANCE TO RUSTING)	-	1250	5% discount for BIS
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	1500	5% discount for BIS

19 Mar, 2026

-
Exclusion: 22.16 (Special Test), 22.32 (Test on ceramic materials), 22.46 (Software), 22.106 (Inter locks), 24 (COMPONENTS), 31 (RESISTANCE TO RUSTING)

120

IS 302 : Part 2 : Sec 26 (2014)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 26 clocks (First Revision)

Digital Clocks

22000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	250	5% discount for BIS
7(Marking and instructions)	-	250	5% discount for BIS
8(Protection against live parts)	-	500	5% discount for BIS
10(POWER INPUT AND CURRENT)	-	500	5% discount for BIS
11(HEATING)	-	750	5% discount for BIS
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	500	5% discount for BIS
14(TRANSIENT OVERVOLTAGES)	-	750	5% discount for BIS
15(MOISTURE RESISTANCE)	-	1750	5% discount for BIS
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	500	5% discount for BIS
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	500	5% discount for BIS
19(ABNORMAL OPERATION)	-	4000	5% discount for BIS
20(STABILITY AND MECHANICAL HAZARDS)	-	500	5% discount for BIS
21(MECHANICAL STRENGTH)	-	500	5% discount for BIS
22(CONSTRUCTION)	-	500	5% discount for BIS
23(INTERNAL WIRING)	-	500	5% discount for BIS
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	750	5% discount for BIS
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	750	5% discount for BIS
27(PROVISION FOR EARTHING)	-	750	5% discount for BIS
28(SCREWS AND CONNECTIONS)	-	750	5% discount for BIS
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	750	5% discount for BIS
30(RESISTANCE TO HEAT AND FIRE)	-	2250	5% discount for BIS
31(RESISTANCE TO RUSTING)	-	1500	5% discount for BIS
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	1500	5% discount for BIS

19 Mar, 2026

-
Exclusion: 22.16 Special Test(Automatic cord reel), 22.32 Special Test(on ceramic materials), 22.46 Special Test(Software), 24 (COMPONENTS)

First
Prev
3
4
5
6
Next
Last

Bureau of Indian Standards

The National Standards Body of India

Bharat Test House Pvt Ltd 1474 Sonipat Haryana

1474, HSIIDC Rai Industrial Estate, SONIPAT, Sonipat, Haryana, 131029

9310314585 bthrai@bharattesthouse.com

Scope List