BIS - LIMS (Laboratory Information Management System)

Electrical Research and Development Association, gujarat

ERDA Road, GIDC, Makarpura, Vadodara, VADODARA, Vadodara, Gujarat, 390010

9987940719 uday.puntambekar@erda.org

Scope List

Reset

154 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 13730 : Part 29 (1996)

Specifications for particular types of winding wires: Part 29 polyester or polyesterimide overcoated with polyamide - Imide enamelled rectangular copper wire, class 200

828150 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause No. 4(Dimensions)	-	500	NA
Clause No. 5(Electrical resistance)	-	600	NA
Clause No. 6(Elongation %)	-	600	NA
Clause No. 7(Springiness)	-	500	NA
Clause No. 8(Flexibility and adherence (i) Mandrel winding test)	-	225	NA
Clause No. 8(Flexibility and adherence (ii) Stretching test)	-	225	NA
Clause No. 8(Flexibility and adherence (iii) Jerk test)	-	225	NA
Clause No. 8(Flexibility and adherence (iv) Peel test)	-	225	NA
Clause No. 13(Breakdown voltage test)	-	1800	NA
Clause No. 15(Temperature index test)	-	821600	NA
Clause No. 9(Heat Shock test)	-	800	NA
Clause No. 12(Resistance to solvent test)	-	850	NA

Complete

30 Nov, 2025

-
-

IS 13730 : Part 34 (2000)

Specifications for particular types of winding wires: Part 34 polyester enamelled round copper wire, class 130 L (First Revision)

830500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause No. 4(Dimensions)	-	500	-
Clause No. 5(Electrical resistance)	-	600	-
Clause No. 6(Elongation %)	-	600	-
Clause No. 7(Springiness)	-	500	-
Clause No. 8(Flexibility and adherence (i) Mandrel winding test)	-	225	-
Clause No. 8(Flexibility and adherence (ii) Stretching test)	-	225	-
Clause No. 8(Flexibility and adherence (iii) Jerk test)	-	225	-
Clause No. 8(Flexibility and adherence (iv) Peel test)	-	225	-
Clause No. 9(Heat Shock test)	-	800	-
Clause No. 10(Cut through test)	-	850	-
Clause No. 11(Resistance to Abrasion test)	-	850	-
Clause No. 12(Resistance to solvent test)	-	850	-
Clause No. 13(Breakdown voltage test)	-	1800	-
Clause No. 14(Continuity of insulation test)	-	650	-
Clause No. 15(Temperature index test)	-	821600	-

Complete

30 Nov, 2025

-
-

IS 13730 : Part 33 (2018)

Specifications for particular types of winding wires: Part 33 glass fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 200 (First Revision)

828600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause No. 4(Dimensions)	-	500	-
Clause No. 5(Electrical resistance)	-	600	-
Clause No. 6(Elongation %)	-	600	-
Clause No. 7(Springiness)	-	500	-
Clause No. 8(Flexibility and adherence (i) Mandrel winding test)	-	225	-
Clause No. 8(Flexibility and adherence (ii) Stretching test)	-	225	-
Clause No. 8(Flexibility and adherence (iii) Jerk test)	-	225	-
Clause No. 8(Flexibility and adherence (iv) Peel test)	-	225	-
Clause No. 13(Breakdown voltage test)	-	1800	-
Clause No. 15(Temperature index test)	-	821600	-

Complete

30 Nov, 2025

-
-

IS 9537 : Part 3 (1983)

Specification for conduits for electrical installations: Part 3 rigid plain conduits of insulating meterials

29950 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1.2(Maximum and minimum outside diameter of conduit)	-	500	-
7.2(Minimum inside diameter of conduit)	-	500	-
7.3(Length of conduit)	-	500	-
7.4(Unifomity of The wall Thickness)	-	500	-
8.1(Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-	1550	-
9.2(Bending Test i) At Room Temp ii) At Low Temp (-5 ±2°C))	-	6700	-
9.3(Compression Test as per caluse 9.3 of IS: 9537 (Part 1)-1980)	-	700	-
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	8300	-
9.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	1700	-
10(Resistance to Heat -Ball presure test)	-	7500	-
11(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	1000	-
12(Electrical Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-	2000	-
11.0(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	1000	-
13(Tests for external influence as per clause 13 of IS: 9537 (Part 1)-1980)	-	9500	-
9.2(Bending Test At Low Temp (-5 ±2°C))	-	5900	-

Complete

30 Nov, 2025

-
-

IS 4289 : Part 1 (1984)

Specification for flexible cables for lifts and other flexible connections: Part 1 elastomer insulated cables (First Revision)

21700 View breakup
Type tests Rs. 21,700/- ; Multicore cables: additional charges Rs. 500/- per core per test.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
17.1.a(Persulphate test)	-	1100	-
17.1.b(Annealing test)	-	500	-
17.1.c(Conductor resistance test)	-	600	-
17.1.d(Test for thickness of insulation and sheath)	-	2000	-
17.1.e.1(Tensile strength and elongation at break for insulation)	-	650	-
17.1.e.2(Ageing in air oven for insulation)	-	5300	-
17.1.f.1(Tensile strength and elongation at break for Sheath)	-	650	-
17.1.e.3(Ageing in oxygen bomb for insulation)	-	1900	-
17.1.f.2(Ageing in air bomb for sheath)	-	1900	-
17.1.f.3(Oil resistance for sheath)	-	1600	-
17.1.f.4(Tear resistance)	-	550	-
17.1.g(High voltage water immersion test)	-	900	-
17.1.h(Insulation resistance test)	-	1000	-
17.1.j(Static flexibility test)	-	700	-
17.1.k(Flammability test)	-	800	-

Complete

30 Nov, 2025

-
-

IS 13730 : Part 31 (2018)

Specifications for particular types of winding wires: Part 31 glass fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180 (First Revision)

828600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause No. 4(Dimensions)	-	500	-
Clause No. 5(Electrical resistance)	-	600	-
Clause No. 6(Elongation %)	-	600	-
Clause No. 7(Springiness)	-	500	-
Clause No. 8(Flexibility and adherence (i) Mandrel winding test)	-	225	-
Clause No. 8(Flexibility and adherence (ii) Stretching test)	-	225	-
Clause No. 8(Flexibility and adherence (iii) Jerk test)	-	225	-
Clause No. 8(Flexibility and adherence (iv) Peel test)	-	225	-
Clause No. 13(Breakdown voltage test)	-	1800	-
Clause No. 15(Temperature index test)	-	821600	-

Complete

30 Nov, 2025

-
-

IS 8144 (2018)

Multipurpose dry batteries - Specification (Second Revision)

R03, R6, R14 & R20

43837 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Designation Of Cells and Batteries, IS 8144)	-	0	---
5(Dimensions, IS 8144)	-	400	Test charge for cl. no. 5 is Rs. 400/-
5(Dimensions, IS 8144)	-	0	Test charge for cl. no. 5 is Rs. 400/-
6.1(Terminals, IS 8144)	-	200	Test charge for cl. no. 6 is Rs. 200/-
6.2(Terminals, IS 8144)	-	0	Test charge for cl. no. 6 is Rs. 200/-
7.1(Requirements, IS 8144)	-	0	---
7.2(Requirements, IS 8144)	-	0	---
7.3(Requirements, IS 8144)	-	0	---
8.1(Marking- Cl. 4.1.6, IS 6303)	-	327	Test charge for cl. no. 8 is Rs. 327/-
8.1(Marking- Cl. 4.1.6, IS 6303)	-	0	Test charge for cl. no. 8 is Rs. 327/-
8.1(Marking- Cl. 4.1.6, IS 6303)	-	0	Test charge for cl. no. 8 is Rs. 327/-
8.1(Marking- Cl. 4.1.6, IS 6303)	-	0	Test charge for cl. no. 8 is Rs. 327/-
8.1(Marking- Cl. 4.1.6, IS 6303)	-	0	Test charge for cl. no. 8 is Rs. 327/-
8.1(Marking- Cl. 4.1.6, IS 6303)	-	0	Test charge for cl. no. 8 is Rs. 327/-
8.1(Marking- Cl. 4.1.6, IS 6303)	-	0	Test charge for cl. no. 8 is Rs. 327/-
8.2(Marking, IS 8144)	-	0	Test charge for cl. no. 8 is Rs. 327/-
9.4(Initial Life Test (Flash light), IS 8144)	-	0	Test charge for cl. no. 9.4 is Rs. 7200/- (including all applicable applications as per cell designations)
9.4(Initial Life Test (Digital audio), IS 8144)	-	0	Test charge for cl. no. 9.4 is Rs. 7200/- (including all applicable applications as per cell designations)
9.4(Initial Life Test (Remote control), IS 8144)	-	0	Test charge for cl. no. 9.4 is Rs. 7200/- (including all applicable applications as per cell designations)
9.4(Initial Life Test (Motor/toy), IS 8144)	-	0	Test charge for cl. no. 9.4 is Rs. 7200/- (including all applicable applications as per cell designations)
9.4(Initial Life Test (Tape recorder), IS 8144)	-	0	Test charge for cl. no. 9.4 is Rs. 7200/- (including all applicable applications as per cell designations)
9.4(Initial Life Test (Portable lighting), IS 8144)	-	0	Test charge for cl. no. 9.4 is Rs. 7200/- (including all applicable applications as per cell designations)
9.4(Initial Life Test (Accelerated/ lot acceptance test), IS 8144)	-	0	Test charge for cl. no. 9.4 is Rs. 7200/- (including all applicable applications as per cell designations)
9.5(Delayed Life Test, IS 8144)	-	15650	Test charge for cl. no. 9.5 is Rs. 15650/- (for 12 months storage)
9.5(Delayed Life Test, IS 8144)	-	7200	Test charge for cl. no. 9.5 is Rs. 7200/- (for life test after storage period)
9.6(Leakage Test, IS 8144)	-	1800	Test charge for cl. no. 9.6 is Rs. 1800/-
9.7(Delayed life test under dry heat conditions, IS 8144)	-	3860	Test charge for cl. no. 9.7 is Rs. 15650/- (for dry heat )
9.7(Delayed life test under dry heat conditions, IS 8144)	-	7200	Test charge for cl. no. 9.7 is Rs. /- (for life test after dry heat )
9.4(Initial Life Test (Radio/clock), IS 8144)	-	7200	Test charge for cl. no. 9.4 is Rs. 7200/- (including all applicable applications as per cell designations)
9.4(Initial Life Test (Pulse test), IS 8144)	-	0	Test charge for cl. no. 9.4 is Rs. 7200/- (including all applicable applications as per cell designations)

Complete

30 Nov, 2025

-
-

IS 2082 (2018)

Stationary storage type electric water heaters - Specification (Fifth Revision)

33360 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification )	-	0	---
6(Classification )	-	0	---
7.1(Marking : Rated Voltage )	-	500	Total Test charge for cl. no. 7 is Rs. 500/-
7.1(Marking : Symbol for nature of supply )	-	0	Total Test charge for cl. no. 7 is Rs. 500/-
7.1(Marking : Rated power input)	-	0	Total Test charge for cl. no. 7 is Rs. 500/-
7.1(Marking: Name, trademark or identification mark of manufacturer )	-	0	Total Test charge for cl. no. 7 is Rs. 500/-
7.1(Marking: Model or type reference)	-	0	Total Test charge for cl. no. 7 is Rs. 500/-
7.1(Marking: Symbol for Class II)	-	0	Total Test charge for cl. no. 7 is Rs. 500/-
7.1(Marking: IP Number)	-	0	Total Test charge for cl. no. 7 is Rs. 500/-
7.1(Marking : Country of manufacture)	-	0	Total Test charge for cl. no. 7 is Rs. 500/-
7.1(Marking : Rated pressure)	-	0	Total Test charge for cl. no. 7 is Rs. 500/-
7.1(Marking : Rated capacity)	-	0	Total Test charge for cl. no. 7 is Rs. 500/-
7.1(Marking : Statement for a pressure-relief device)	-	0	Total Test charge for cl. no. 7 is Rs. 500/-
7.1(Marking : Statement for pressure reducing valve ( For rated pressure less than 0.6 MPa))	-	0	Total Test charge for cl. no. 7 is Rs. 500/-
7.1(Marking : Warning for Open- outlet )	-	0	Total Test charge for cl. no. 7 is Rs. 500/-
7.6(Marking : Symbol used )	-	0	Total Test charge for cl. no. 7 is Rs. 500/-
7.8(Marking : Terminals )	-	0	Total Test charge for cl. no. 7 is Rs. 500/-
7.11(Marking : Indication of controls )	-	0	Total Test charge for cl. no. 7 is Rs. 500/-
7.13(Marking : Official language of Instruction )	-	0	Total Test charge for cl. no. 7 is Rs. 500/-
7.14(Marking : Legibility and durability)	-	0	Total Test charge for cl. no. 7 is Rs. 500/-
7.101(Marking : Indifiction of water inlet and water outlet )	-	0	Total Test charge for cl. no. 7 is Rs. 500/-
7(Marking)	-	0	Total Test charge for cl. no. 7 is Rs. 500/-
7(Marking)	-	0	Total Test charge for cl. no. 7 is Rs. 500/-
7(Marking)	-	0	Total Test charge for cl. no. 7 is Rs. 500/-
7(Marking)	-	0	Total Test charge for cl. no. 7 is Rs. 500/-
7(Marking)	-	0	Total Test charges is included in 7.1
7(Marking)	-	0	Total Test charge for cl. no. 7 is Rs. 500/-
7(Marking)	-	0	Total Test charge for cl. no. 7 is Rs. 500/-
7(Marking)	-	0	Total Test charge for cl. no. 7 is Rs. 500/-
7(Marking)	-	0	Total Test charge for cl. no. 7 is Rs. 500/-
7(Marking)	-	0	Total Test charge for cl. no. 7 is Rs. 500/-
7(Marking)	-	0	Total Test charge for cl. no. 7 is Rs. 500/-
7(Marking)	-	0	Total Test charge for cl. no. 7 is Rs. 500/-
7(Marking)	-	0	Total Test charge for cl. no. 7 is Rs. 500/-
7(Marking)	-	0	Total Test charge for cl. no. 7 is Rs. 500/-
7(Marking)	-	0	Total Test charge for cl. no. 7 is Rs. 500/-
7(Marking)	-	0	Total Test charge for cl. no. 7 is Rs. 500/-
7(Marking)	-	0	Total Test charge for cl. no. 7 is Rs. 500/-
7(Marking)	-	0	Total Test charge for cl. no. 7 is Rs. 500/-
7(Marking)	-	0	Total Test charge for cl. no. 7 is Rs. 500/-
7(Marking)	-	0	Total Test charge for cl. no. 7 is Rs. 500/-
7(Marking)	-	0	Total Test charge for cl. no. 7 is Rs. 500/-
7(Marking)	-	0	Total Test charge for cl. no. 7 is Rs. 500/-
7(Marking)	-	0	Total Test charge for cl. no. 7 is Rs. 500/-
7(Marking)	-	0	Total Test charge for cl. no. 7 is Rs. 500/-
7(Marking)	-	0	Total Test charge for cl. no. 7 is Rs. 500/-
7(Marking)	-	0	Total Test charge for cl. no. 7 is Rs. 500/-
7(Marking)	-	0	Total Test charge for cl. no. 7 is Rs. 500/-
7(Marking)	-	0	Total Test charge for cl. no. 7 is Rs. 500/-
(Cl.8 of IS 302-2-21:2011)(Protection Against Access to Live Parts)	-	500	Total Test charge for cl. no. 8 is Rs. 500/-
(Cl.10 of IS 302-2-21: 2011)(Power Input & Current)	-	500	Total Test charge for cl. no. 10 is Rs. 500/-
(Cl.11 of 302-2-21:2011)(Heating)	-	900	Total Test charge for cl. no. 11 is Rs. 900/-
(Cl.11 of 302-2-21:2011)(Heating)	-	0	Total Test charge for cl. no. 11 is Rs. 900/-
(Cl.11 of 302-2-21:2011)(Heating)	-	0	Total Test charge for cl. no. 11 is Rs. 900/-
Cl.11 of 302-2-21:2018(Heating : Temp of Walls, ceilings and floor of the test corner )	-	0	Total Test charge for cl. no. 11 is Rs. 900/-
Cl.11 of 302-2-21:2018(Heating : Temp of Rubber or PVC insulation of internal and external wiring)	-	0	Total Test charge for cl. no. 11 is Rs. 900/-
Cl.11 of 302-2-21:2018(Heating : Room Temp.)	-	0	Total Test charge for cl. no. 11 is Rs. 900/-
(Cl.13 of IS 302-2-21:2011)(Leakage Current )	-	500	Total Test charge for cl. no. 13 is Rs. 500/-
(Cl.13 of IS 302-2-21:2011)(Electrical Strength at Operating Temperature)	-	0	Total Test charge for cl. no. 13 is Rs. 500/-
(Cl.14ofIS302-2-21:2011)(Transient Over Voltages)	-	6500	Total Test charge for cl. no. 14 is Rs. 6500/-
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	2850	Total Test charge for cl. no. 15 is Rs. 2850/-
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	0	Total Test charge for cl. no. 15 is Rs. 2850/-
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	0	Total Test charge for cl. no. 15 is Rs. 2850/-
Cl.15 of IS 302-2-21-2018(Moisture Resistance)	-	0	Total Test charge for cl. no. 15 is Rs. 2850/-
Cl.16 of IS 302-2-21-2018(Leakage current and Electric strength (After humidity): Leakage current )	-	500	Total Test charge for cl. no. 16 is Rs. 500/-
Cl.16 of IS 302-2-21-2018(Leakage current and Electric strength (After humidity): Electric Strentgh )	-	0	Total Test charge for cl. no. 16 is Rs. 500/-
(Cl.17 of IS 302-2-21:2011)(Overload protection of transformers & associated circuits)	-	0	---
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	750	Total Test charge for cl. no. 19 is Rs. 750/-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	0	Total Test charge for cl. no. 19 is Rs. 750/-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	0	Total Test charge for cl. no. 19 is Rs. 750/-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	0	Total Test charge for cl. no. 19 is Rs. 750/-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : leakage from container during test)	-	0	Total Test charge for cl. no. 19 is Rs. 750/-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : High Voltage )	-	0	Total Test charge for cl. no. 19 is Rs. 750/-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : Insulation of the supply cable or cord)	-	0	Total Test charge for cl. no. 19 is Rs. 750/-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : Wall ceiling temp. of test corner )	-	0	Total Test charge for cl. no. 19 is Rs. 750/-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : emission of flame or molten metal or poisonous or ignitable gas )	-	0	Total Test charge for cl. no. 19 is Rs. 750/-
(Cl.20 of IS 302-2-21:2011)(Stability & Mechanical Hazards)	-	0	---
(Cl.21ofIS302-2-21:2011)(Mechanical strength)	-	500	Total Test charge for cl. no. 21 is Rs. 500/-
Cl.21.1 of IS 302-1:2008(Mechanical strength : Rough handling in normal use)	-	0	Total Test charge for cl. no. 21 is Rs. 500/-
Cl.21.2 of IS 302-1:2008(Mechanical strength : prevent penetration by sharp implements. )	-	0	Total Test charge for cl. no. 21 is Rs. 500/-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1950	Total Test charge for cl. no. 22 is Rs. 1950/-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Total Test charge for cl. no. 22 is Rs. 1950/-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Total Test charge for cl. no. 22 is Rs. 1950/-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Total Test charge for cl. no. 22 is Rs. 1950/-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Total Test charge for cl. no. 22 is Rs. 1950/-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Total Test charge for cl. no. 22 is Rs. 1950/-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Total Test charge for cl. no. 22 is Rs. 1950/-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Total Test charge for cl. no. 22 is Rs. 1950/-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Total Test charge for cl. no. 22 is Rs. 1950/-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Total Test charge for cl. no. 22 is Rs. 1950/-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Total Test charge for cl. no. 22 is Rs. 1950/-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Total Test charge for cl. no. 22 is Rs. 1950/-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Total Test charge for cl. no. 22 is Rs. 1950/-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Total Test charge for cl. no. 22 is Rs. 1950/-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Total Test charge for cl. no. 22 is Rs. 1950/-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Total Test charge for cl. no. 22 is Rs. 1950/-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Total Test charge for cl. no. 22 is Rs. 1950/-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Total Test charge for cl. no. 22 is Rs. 1950/-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Total Test charge for cl. no. 22 is Rs. 1950/-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Total Test charge for cl. no. 22 is Rs. 1950/-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Total Test charge for cl. no. 22 is Rs. 1950/-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Total Test charge for cl. no. 22 is Rs. 1950/-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Total Test charge for cl. no. 22 is Rs. 1950/-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Total Test charge for cl. no. 22 is Rs. 1950/-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Total Test charge for cl. no. 22 is Rs. 1950/-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Total Test charge for cl. no. 22 is Rs. 1950/-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Total Test charge for cl. no. 22 is Rs. 1950/-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Total Test charge for cl. no. 22 is Rs. 1950/-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	Total Test charge for cl. no. 23 is Rs. 500/-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	Total Test charge for cl. no. 23 is Rs. 500/-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	Total Test charge for cl. no. 23 is Rs. 500/-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	Total Test charge for cl. no. 23 is Rs. 500/-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	Total Test charge for cl. no. 23 is Rs. 500/-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	Total Test charge for cl. no. 23 is Rs. 500/-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	Total Test charge for cl. no. 23 is Rs. 500/-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	Total Test charge for cl. no. 23 is Rs. 500/-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	Total Test charge for cl. no. 23 is Rs. 500/-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	Total Test charge for cl. no. 23 is Rs. 500/-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	Total Test charge for cl. no. 23 is Rs. 500/-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	Total Test charge for cl. no. 23 is Rs. 500/-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	Total Test charge for cl. no. 23 is Rs. 500/-
(Cl.24ofIS302-221:2011)(Component)	-	1550	Total Test charge for cl. no. 24 is Rs. 1550/-
(Cl.24ofIS302-221:2011)(Component)	-	0	Total Test charge for cl. no. 24 is Rs. 1550/-
(Cl.24ofIS302-221:2011)(Component)	-	0	Total Test charge for cl. no. 24 is Rs. 1550/-
(Cl.24ofIS302-221:2011)(Component)	-	0	Total Test charge for cl. no. 24 is Rs. 1550/-
(Cl.24ofIS302-221:2011)(Component)	-	0	Total Test charge for cl. no. 24 is Rs. 1550/-
(Cl.24ofIS302-221:2011)(Component)	-	0	Total Test charge for cl. no. 24 is Rs. 1550/-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	750	Total Test charge for cl. no. 25 is Rs. 750/-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	Total Test charge for cl. no. 25 is Rs. 750/-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	Total Test charge for cl. no. 25 is Rs. 750/-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	Total Test charge for cl. no. 25 is Rs. 750/-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	Total Test charge for cl. no. 25 is Rs. 750/-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	Total Test charge for cl. no. 25 is Rs. 750/-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	Total Test charge for cl. no. 25 is Rs. 750/-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	Total Test charge for cl. no. 25 is Rs. 750/-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	Total Test charge for cl. no. 25 is Rs. 750/-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	Total Test charge for cl. no. 25 is Rs. 750/-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	Total Test charge for cl. no. 25 is Rs. 750/-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	Total Test charge for cl. no. 25 is Rs. 750/-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	Total Test charge for cl. no. 25 is Rs. 750/-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	Total Test charge for cl. no. 25 is Rs. 750/-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	Total Test charge for cl. no. 25 is Rs. 750/-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	Total Test charge for cl. no. 25 is Rs. 750/-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	Total Test charge for cl. no. 25 is Rs. 750/-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	Total Test charge for cl. no. 25 is Rs. 750/-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	Total Test charge for cl. no. 25 is Rs. 750/-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	Total Test charge for cl. no. 25 is Rs. 750/-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	Total Test charge for cl. no. 25 is Rs. 750/-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	Total Test charge for cl. no. 26 is Rs. 500/-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	0	Total Test charge for cl. no. 26 is Rs. 500/-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	0	Total Test charge for cl. no. 26 is Rs. 500/-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	0	Total Test charge for cl. no. 26 is Rs. 500/-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	0	Total Test charge for cl. no. 26 is Rs. 500/-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	0	Total Test charge for cl. no. 26 is Rs. 500/-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	0	Total Test charge for cl. no. 26 is Rs. 500/-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	0	Total Test charge for cl. no. 26 is Rs. 500/-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	0	Total Test charge for cl. no. 26 is Rs. 500/-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	0	Total Test charge for cl. no. 26 is Rs. 500/-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	0	Total Test charge for cl. no. 26 is Rs. 500/-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	500	Total Test charge for cl. no. 27 is Rs. 500/-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	0	Total Test charge for cl. no. 27 is Rs. 500/-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	0	Total Test charge for cl. no. 27 is Rs. 500/-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	0	Total Test charge for cl. no. 27 is Rs. 500/-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	0	Total Test charge for cl. no. 27 is Rs. 500/-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	0	Total Test charge for cl. no. 27 is Rs. 500/-
(Cl.28 of IS 302-2-21:2011)(Screws & Connections)	-	500	Total Test charge for cl. no. 28 is Rs. 500/-
(Cl.29ofIS302-2-21:2011)(Clearances, Creepage Distances and Solid Insulation)	-	500	Total Test charge for cl. no. 29 is Rs. 500/-
(Cl.30 of IS 302-2-21:2011)(Resistance to Heat & Fire)	-	4960	Total Test charge for cl. no. 30 is Rs. 4960/-
(Cl.30 of IS 302-2-21:2011)(Resistance to Heat & Fire)	-	0	Total Test charge for cl. no. 30 is Rs. 4960/-
(Cl.31 of IS 302-2-21:2011)(Resistance to Rusting)	-	500	Total Test charge for cl. no. 31 is Rs. 500/-
(Cl.15 of IS 2082:2018)(Verification of the Rated Capacity)	-	500	Total Test charge for cl. no. 15 is Rs. 500/-
(Cl.16 of IS 2082:2018)(Standing Loss per 24 Hours)	-	2550	Total Test charge for cl. no. 16 is Rs. 2550/-
(Cl.17 of IS 2082:2018)(Hot Water Output)	-	900	Total Test charge for cl. no. 17 is Rs. 900/-
(Cl.18 of IS 2082:2018)( Reheating Time)	-	900	Total Test charge for cl. no. 18 is Rs. 900/-
(Cl.19 of IS 2082:2018)(Mixing Factor)	-	500	Total Test charge for cl. no. 19 is Rs. 500/-
(Cl.20 of IS 2082:2018)(Deviation of Dial Calibration)	-	650	Total Test charge for cl. no. 20 is Rs. 650/-
(Cl.21 of IS 2082:2018)(Cyclic Temperature Variation)	-	650	Total Test charge for cl. no. 21 is Rs. 650/-
(Cl.22 of IS 2082:2018)(Finish)	-	500	Total Test charge for cl. no. 22 is Rs. 500/-

Complete

30 Nov, 2025

-
Exclude Cl. No. Cl.19.11.4.7 of IS 302-2-21:2011 Abnormal Operation

IS 14220 (2018)

Openwell submersible pumpsets - Specification (First Revision)

Voltage: up to 440V Rated power: up to110 kW

49500 View breakup
Upto 5.5 kW: Rs. 10,240/-, 5.6 kW to 11 kW : Rs. 11,145/-, 11.1 kW to 22 kW: Rs. 12,530/-, 22.1 kW to 45 kW : Rs. 14,410/-, 45.1 kW to 75 kW : Rs. 34,200/-, 75.1 kW to 110 kW : Rs. 49,500/- .

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1(Design Features)	-	0	NIL
8.1.1(Design Features)	-	0	NIL
8.1.4(Design Features)	-	0	NIL
8.1.5(Design Features)	-	0	NIL
8.1.5(Design Features)	-	0	NIL
9(Efficiency)	-	0	NIL
15.5(Hydrostatic Pressure Test)	-	2300	NIL
16.1.1( Guarantee of Performance)	-	12000	NIL
16.1.2( Guarantee of Performance)	-	12000	NIL
16.1.3( Guarantee of Performance)	-	12000	NIL
16.1.4( Guarantee of Performance)	-	12000	NIL
16.1.5( Guarantee of Performance)	-	12000	NIL
18.1(Marking)	-	50	NIL
18.1(Marking)	-	500	NIL
18.1(Marking)	-	500	NIL
18.1(Marking)	-	500	NIL
18.1(Marking)	-	500	NIL
18.1(Marking)	-	500	NIL
18.1(Marking)	-	500	NIL
18.1(Marking)	-	500	NIL
18.1(Marking)	-	500	NIL
18.1(Marking)	-	500	NIL
18.1(Marking)	-	500	NIL
18.1(Marking)	-	500	NIL
18.1(Marking)	-	500	NIL
18.1(Marking)	-	500	NIL
18.1(Marking)	-	500	NIL
18.1(Marking)	-	500	NIL
18.1(Marking)	-	500	NIL
18.1.3(Marking)	-	500	NIL
7(Constructional features)	-	3000	NIL
7.1(It is recognized that a number of materials of construction are available to meet the needs for pumps handling clear, cold water.)	-	3000	NIL
7.2(Gaskets, seals and packings used for clear, cold water pumps shall conform to the applicable requirements specified in 5.2 of IS 5120.)	-	3000	NIL
7.3(The motor shall be provided with a breathing attachment like bellows, diaphragm etc; to compensate the volumetric variation of water inside the motor due to change in the temperature.)	-	3000	NIL
7.4(The motor shall be protected from ingress of well water, sand and other foreign matter by means of cable glands, rubber seals etc.)	-	3000	NIL
7.5(All materials and components for the motor shall be suitable for application in respect of resistance and mechanical performance to protect it)	-	3000	NIL
7.6(The rotor of the wet type open well submersible motor and rotor in water filled designed motor shall be provided with suitable coating from corrosion under water. However if suitable anticorrosion additive is added in the water, no separate protection on rotors is necessary.)	-	3000	NIL
8(Design Features)	-	0	NIL
8.1.2(The multi-stage pump shaft may be guided through bearings, the bearings may be provided in stage casing, suction housing and discharge casing, while in case of intermediate bearings, suitable positions may be selected in the overall span.)	-	0	NIL
8.1.3(The pump may be equipped with replaceable bearing and wearing ring, wherever provided.)	-	0	NIL
8.1.4(The strainer on the suction shall offer the best compromise amongst restraining large solids from entering the pump and containing the suction losses to the minimum.)	-	0	NIL
8.1.5(The pump shall be capable to give discharge without overloading the prime mover within the permissible current at rated voltage and supply frequency at minimum +5 percent and minimum –15 percent of the guaranteed duty point head up to 30 m. Above 30 m, the pump shall be capable to give discharge without overloading the prime mover within the permissible current at rated voltage and supply frequency at minimum +10 percent and minimum –25 percent of the guaranteed duty point head.)	-	0	NIL
12(Cable)	-	0	NIL
12.1(Flat/Round cables as per IS694 shall be used)	-	0	NIL
12.1.2(The size of the conductor shall be adequate and suitable for contineous use under water and in air. the length of the cable shall be minimum 2 m externallly unless otherwise specified by the customer)	-	0	NIL
12.1.3(The size and of the cable should be suitably selected so that the voltage drop between control panel and the mptor terminal does not exeed three percent of the rated voltage)	-	0	NIL
12.1.4(In case a joint is required to be made between the lead cable supplied with the motor and the user’s cable, a detailed procedure to make water tight joining shall be supplied by the motor manufacturer.)	-	0	NIL
12.1.5(If four core cable is used, the fourth core is to be used for earthing.)	-	0	NIL
14.10.1(a)(Insulation Resistance test)	-	550	NIL
14.10.1(b)(High Voltage test)	-	550	NIL
14.10.1(c)(Measurement of stator resistance)	-	500	NIL
14.10.1(d)(No load test at rated voltage)	-	1200	NIL
14.10.1(e)(Reduced voltage running up test at no load)	-	0	NIL
14.10.1(f)(Locked rotor)	-	3000	NIL
14.10.1(g)(Breakaway (starting) torque)	-	3000	NIL
14.10.1(h)(Leakage current test;)	-	500	NIL
14.10.1(j)(Temperature rise test at rated voltage)	-	12000	NIL
14.10.1(k)(Temperature rise test at reduced voltage)	-	9000	NIL
16.1(Guarntee of Performance)	-	12000	NIL
16.1.1(The pumpset shall be guaranteed for their performance of the nominal volume rate of flow and the nominal head at the guaranteed duty point. The overall efficiency of the pumpset shall be guaranteed at the declared duty point only.)	-	12000	NIL
16.1.2(The guarantee shall be deemed to have been met with, if the measured values of head, volume rate of flow and overall efficiency are within the indicated in IS 11346 limits)	-	12000	NIL
16.1.3(Open well submersible motor shall not get overloaded in the specified operating head range at rated voltage and supply frequency.)	-	12000	NIL
16.1.4(The pump shall be tested for the operating head range as per 8.1.5.)	-	12000	NIL
16.1.5(The overloading of motor is that condition when maximum current drawn by the motor exceeds the limit of 1.07 times of the rated motor current)	-	12000	NIL
16.1.6(The tolerance shall apply to guaranteed duty point only.)	-	12000	NIL
16.1.7(Performance at rated voltage and supply frequency is actual performance of the set. This is better than performance at rated speed, since in the entire operating head range speed of motor is higher than rated speed, as motor is running in under loaded condition.)	-	12000	NIL
16.1.8(The manufacturer shall specify the minimum submergence of pump unit at duty point.)	-	12000	NIL
10.2(Casing)	-	2300	NIL
10.3(Impeller)	-	3000	NIL
10.4.1(Shaft)	-	3000	NIL
10.4.2(Shaft)	-	800	NIL
10.5.1(Balancing)	-	2700	NIL
10.5.2(Balancing)	-	2700	NIL
10.5.3(Balancing)	-	2700	NIL
10.5.4(Balancing)	-	2700	NIL
10.6.1( Provision for Earthing)	-	400	NIL
10.6.2( Provision for Earthing)	-	400	NIL
10.6.3( Provision for Earthing)	-	400	NIL
10.6.4( Provision for Earthing)	-	400	NIL
10.7.1(Terminal Marking and Direction of Rotation)	-	0	NIL
10.7.2(Terminal Marking and Direction of Rotation)	-	0	NIL
10.7.3(Terminal Marking and Direction of Rotation)	-	0	NIL

Complete

30 Nov, 2025

-
-

IS 8783 : Part 4 : Sec 1 (1995)

Winding wires for submersible motors - Specification: Part 4 specification for indmdual wires: Sec 1 HR PVC insulated wires (First Revision)

19550 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6(Annealing Test)	-	600	-
Cl 6(Resistance Test)	-	700	-
Cl. 4 Table 1of IS: 8783 (part 2) (Volume resistivity)	-	600	-
Cl. 4 Table 1of IS: 8783 (part 2) (Volume resistivity)	-	600	-
Cl. 4 Table 1of IS: 8783 (part 2) (Tensile strength )	-	400	-
Cl. 4 Table 1of IS: 8783 (part 2) (Elongation)	-	400	-
Cl. 4 Table 1of IS: 8783 (part 2) (Tensile Strength)	-	1588	-
Cl. 4 Table 1of IS: 8783 (part 2) (Variation)	-	1588	-
Cl. 4 Table 1of IS: 8783 (part 2) (Elongation at Break )	-	1588	-
Cl. 4 Table 1of IS: 8783 (part 2) (Variation)	-	1588	-
Cl. 4 Table 1of IS: 8783 (part 2) (Shrinkage test )	-	400	-
Cl. 4 Table 1of IS: 8783 (part 2) (Shrinkage test )	-	400	-
Cl. 4 Table 1of IS: 8783 (part 2) (Water absorption (Gravimetric) )	-	1850	-
Cl. 4 Table 1of IS: 8783 (part 2) (Hot deformation Test )	-	1200	-
Cl. 4 Table 1of IS: 8783 (part 2) (Heat shock Test )	-	800	-
Cl.4.3(Colour)	-	0	-
Cl.4.4(Overall Diameter)	-	500	-
Cl.4.6(High Voltage Test Water Immersion )	-	900	-
Cl No. 3.1(Conductor diameter)	-	500	-
Cl.3.1 (Conductor)	-	1550	-

Complete

30 Nov, 2025

-
-

IS 8783 : Part 4 : Sec 3 (1995)

Winding wires for submersible motors - Specification: Part 4 specification for individual wires: Sec 3 polyester and polypropylene insulated winding wires (First Revision)

19550 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause No. 3(Conductor Resistance)	-	700	-
Clause No. 3(High Voltage Test (Water Immersion test) at room temperature)	-	900	-
Clause No. 3(Insulation Resistance (Volume Resistivity at 27º C ))	-	1200	-
Clause No. 3(Overall Dimensions)	-	500	-
Clause No. 3(Conductor Diameter)	-	500	-
Clause No. 3(Annealing Test)	-	600	-
Clause No. 3(Thickness of Insulation)	-	1200	-
Clause No. 3(Heat Shock)	-	800	-
Clause No. 3(Shrinkage)	-	800	-
Clause No. 3(Hot Deformation)	-	1200	-
Clause No. 3(Water absorption)	-	1850	-
Clause No. 3(Insulation Resistance (Volume Resistivity at test temperature 90 º C ))	-	1200	-
4(i) Material)	-	500	-

Complete

30 Nov, 2025

-
-

IS 9335 : Part 3 : Sec 2 (1985)

Specification for cellulosic papers for electrical purposes: Part 3 specifications for individual materials: Sec 2 capacitor paper

All

10350 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5, Table 1(Thickness)	-	575	-
5, Table 1(Apparent density)	-	1725	-
5, Table 1(Tensile strength Expressed as Tensile Index)	-	1725	-
5, Table 1(Moisture Content)	-	1150	-
5, Table 1(Ash)	-	1725	-
5, Table 1(Conductivity of Aqueous Extract)	-	1725	-
5, Table 1(pH of Aqueous Extract)	-	1725	-

Complete

30 Nov, 2025

-
-

IS 13730 : Part 15 (1994)

Particular types of winding wires: Part 15 polyesterimide enammelled round aluminium wire, class 180

831950 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause No. 4(Dimensions)	-	500	-
Clause No. 5(Electrical resistance)	-	600	-
Clause No. 6(Elongation %)	-	600	-
Clause No. 8(Flexibility and adherence (i) Mandrel winding test)	-	225	-
Clause No. 8(Flexibility and adherence (ii) Stretching test)	-	225	-
Clause No. 8(Flexibility and adherence (iii) Jerk test)	-	225	-
Clause No. 8(Flexibility and adherence (iv) Peel test)	-	225	-
Clause No. 9(Heat Shock test)	-	800	-
Clause No. 10(Cut through test)	-	850	-
Clause No. 11(Resistance to Abrasion test)	-	850	-
Clause No. 12(Resistance to solvent test)	-	850	-
Clause No. 13(Breakdown voltage test)	-	1800	-
Clause No. 15(Temperature index test)	-	821600	-

Complete

30 Nov, 2025

-
-

IS 2465 (1984)

Specification for cables for motor vehicles (Second Revision)

54950 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2 & 12.1, (e), 6(Shrinkage Test (%) of Sheath)	-	750	NA
7.2, 10.3, 11(Dimensions & thickness )	-	1150	NA
14(High Voltage Test)	-	850	NA
16.1(CAPACITANCE TEST FOR PVC INSULATION IGNITION CABLE)	-	5500	NA
17.1(OZONE RESISTANCE TEST FOR IGNITION CABLES)	-	1850	NA
18.1(EFFECT OF HEAT ON FLEXIBILITY FOR IGNITION CABLES)	-	2500	NA
19.1(EFFECT OF OIL ON IGNITION CABLES)	-	1850	NA
20.3(EFFECT OF LUBRICATING OIL)	-	2275	NA
20.3(EFFECT OF BRAKE FLUID)	-	2275	NA
20.3(EFFECT OF DIESEL)	-	2275	NA
20.3(Increase in average diameter %)	-	2275	NA
22.1(FLAMMABILITY TEST)	-	900	NA
4.2 & 12.1, (e), 3(Loss of mass test (mg/cm²) of Sheath)	-	6100	NA
3 & 6(Annealing test)	-	550	NA
3 & 6(Persulphate Test)	-	1300	NA
3 & 6(Conductor resistance Test (ohm/km at 20˚c))	-	700	NA
4.2 & 12.1, (f), 1(elongation at break (N/mm²))	-	0	NA
4.2 & 12.1, (f), 1(Tensile Strength at break (N/mm²))	-	750	NA
4.2 & 12.1, (e), 1(elongation test at break)	-	0	NA
4.2 & 12.1, (e), 1(Tensile strength at break)	-	750	NA
4.2 & 12.1, (f), 2(Ageing in air oven)	-	6100	NA
4.2 & 12.1, (e), 2(After Ageing in air oven)	-	6100	NA
4.2 & 12.1, (e), 3(Loss of mass test (mg/cm²) of Insulation)	-	6100	NA
4.2 & 12.1, (e), 4(Hot deformation test (%) of Insulation)	-	1150	NA
4.2 & 12.1, (e), 4(Hot deformation test (%) of Sheath)	-	1150	NA
4.2 & 12.1, (e), 5(Heat Shock Test of Insulation)	-	750	NA
4.2 & 12.1, (e), 5(Heat Shock Test of Sheath)	-	750	NA
4.2 & 12.1, (e), 6(Shrinkage Test (%) of Insulation)	-	750	NA
7.2, 10.3, 11(Overall Dimension (mm))	-	1150	NA

Complete

30 Nov, 2025

-
-

IS 8472 (2019)

Centrifugal regenerative pumps for clear, cold water - Specification (Second Revision)

Rated Voltage: up to 250 V Rated power: up to 10 kW

10845 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
16.1(Marking)	-	500	-
12.1(Pump Tests Cl.8 of IS 11346-2002 Rate of flow and head Cl.8 of IS 11346-2002)	-	2000	-
12.3(Hydrostatic Pressure Test)	-	525	-
12.5(Self-Priming Test for Self-Priming Pumps)	-	820	-
13.1.2(No Load Test at Rated Voltage)	-	500	-
13.1.2.1.1(Temperature Rise Test at Rated Voltage)	-	2000	-
13.1.2.1.2(Temperature Rise Test at Reduced Voltage)	-	2000	-
13.1.2(Break away torque Pull up torque)	-	500	-
13.2.2(High Voltage test (cl.22.3.1(n) of IS 7538))	-	500	-
13.1.2(Insulation Resistance)	-	500	-
8(Direction of Rotation)	-	500	-
7(Material of Constructional)	-	500	-
11.1(General Requirements)	-	0	-
13.2.2(Measurement of stator resistance test (cl.22.3.1(b) of IS 7538))	-	0	-

Complete

30 Nov, 2025

-
-

IS 6595 : Part 1 (2018)

Horizontal centrifugal pumps for clear, cold water - Specification: Part 1 agricultural and rural water supply purposes (Fourth Revision)

Voltage: upto 440V, Power upto 110 kW, Size: 5''

15985 View breakup
Upto 5.5kw : Rs. 6,000/-; 5.51 to 11 kW : Rs. 6,700/- ; 11.1 to 22 kW : Rs. 7,200/-; 22.1 to 45 kW : Rs. 8,645/-; 45.1 to 75 kW : Rs. 12,650/-; 75.1 to 110 kW : Rs. 15,985/- ; Installation charges will be Rs. 3000/- Extra.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1(Design Features Head Restrictions)	-	0	-
9.1(General Requirements Volute Casing)	-	2530	-
10(Pump Test Verification of guarante Cl.8 of IS 11346-2002 Rate of flow and head Cl.8 of IS 11346-2002)	-	9200	-
Cl. 7.2(Directin of rotation)	-	690	-
Cl. 6.1(Material of Construction)	-	0	-
9.2(General Requirements Impeller)	-	2530	-
Cl. 14 (a)(Manufacturer's name or Registerd trade-mark)	-	690	-
Cl. 14 (b)(Model, Size)	-	690	-
Cl. 14 (c)(Rated Speed)	-	690	-
Cl. 14 (d)(Nominal Head in m, Nominal Discharge in L/s and Pump Efficiency in percent of nominal head)	-	690	-
Cl. 14 (e)(Head Range in m for non overloading Requirment)	-	690	-
Cl. 14 (f)(Discharge Range in L/s Corosponding to specified head range)	-	690	-
Cl. 14 (g)(Recommanded Prime mover in kW)	-	690	-
Cl. 14 (h)(Arrow to indication direction of rotation)	-	690	-
8.1(Design Features Head Restrictions)	-	0	-
8.2 As per fig 1 & 2(Design Features Minimum efficiency )	-	0	-
8.3(Design Features Shaft )	-	0	-
7.1(Direction of Rotation)	-	690	-
Cl. 6.2(Gasket, Seals and Packings)	-	0	-

Complete

30 Nov, 2025

-
-

IS 3854 (1997)

Switches for domestic and similar purposes - Specification (Second Revision)

Rating covered up to 45 A Switches.

11850 View breakup
Rs. 7350/- for 6 A Screw type terminals, Rs. 8775/- for 6 A Screwless terminals, Rs. 7575/- for 10 A Screw type terminals, Rs. 9600/- for 10 A Screwless terminals, Rs. 8775/- for 16 A Screw type terminals, Rs. 11850/- for 16 A Screwless terminals, Rs. 7875/- for 20 A, Rs. 8850/- for 25 A, Rs. 9375/- for 32 A, Rs. 9825/- for 45 A,

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Rating)	-	100	Test charge for cl. no. 6 is Rs. 100/-
6.1(Ratings)	-	0	Test charge for cl. no. 6 is Rs. 100/-
6.2(Ratings)	-	0	Test charge for cl. no. 6 is Rs. 100/-
7(Classification)	-	100	Test charge for cl. no. 7 is Rs. 100/-
7.1(Classification)	-	0	Test charge for cl. no. 7 is Rs. 100/-
7.1.1(Classification)	-	0	Test charge for cl. no. 7 is Rs. 100/-
7.1.2(Classification)	-	0	Test charge for cl. no. 7 is Rs. 100/-
7.1.3(Classification)	-	0	Test charge for cl. no. 7 is Rs. 100/-
7.1.4(Classification)	-	0	Test charge for cl. no. 7 is Rs. 100/-
7.1.5(Classification)	-	0	Test charge for cl. no. 7 is Rs. 100/-
7.1.6(Classification)	-	0	Test charge for cl. no. 7 is Rs. 100/-
7.1.7(Classification)	-	0	Test charge for cl. no. 7 is Rs. 100/-
7.1.8(Classification)	-	0	Test charge for cl. no. 7 is Rs. 100/-
7.2(Classification)	-	0	Test charge for cl. no. 7 is Rs. 100/-
8(Marking)	-	100	Test charge for cl. no. 8 is Rs. 100/-
8.1(Marking)	-	0	Test charge for cl. no. 8 is Rs. 100/-
8.2(Marking)	-	0	Test charge for cl. no. 8 is Rs. 100/-
8.3(Marking)	-	0	Test charge for cl. no. 8 is Rs. 100/-
8.5(Marking)	-	0	Test charge for cl. no. 8 is Rs. 100/-
8.6(Marking)	-	0	Test charge for cl. no. 8 is Rs. 100/-
8.7(Marking)	-	0	Test charge for cl. no. 8 is Rs. 100/-
8.8(Marking)	-	0	Test charge for cl. no. 8 is Rs. 100/-
8.9(Marking)	-	0	Test charge for cl. no. 8 is Rs. 100/-
8.1(Marking)	-	0	Test charge for cl. no. 8 is Rs. 100/-
10(Protection against Electric Shock)	-	100	Test charge for cl. no. 10 is Rs. 100/-
10.1(Protection against electric shock )	-	0	Test charge for cl. no. 10 is Rs. 100/-
10.2(Protection against electric shock )	-	0	Test charge for cl. no. 10 is Rs. 100/-
10.3(Protection against electric shock )	-	0	Test charge for cl. no. 10 is Rs. 100/-
10.3.1(Protection against electric shock )	-	0	Test charge for cl. no. 10 is Rs. 100/-
10.3.2(Protection against electric shock )	-	0	Test charge for cl. no. 10 is Rs. 100/-
10.4(Protection against electric shock )	-	0	Test charge for cl. no. 10 is Rs. 100/-
10.5(Protection against electric shock )	-	0	Test charge for cl. no. 10 is Rs. 100/-
10.6(Protection against electric shock )	-	0	Test charge for cl. no. 10 is Rs. 100/-
10.7(Protection against electric shock )	-	0	Test charge for cl. no. 10 is Rs. 100/-
11.1(Provision for earthing)	-	100	Test charge for cl. no. 11 is Rs. 100/-
11.2(Provision for earthing)	-	0	Test charge for cl. no. 11 is Rs. 100/-
11.3(Provision for earthing)	-	0	Test charge for cl. no. 11 is Rs. 100/-
11.4(Provision for earthing)	-	0	Test charge for cl. no. 11 is Rs. 100/-
12(Terminals)	-	3175	For screw type terminals : Rs. 100/- For screw less type terminals : Rs. 1525/- (for 6 A rating) For screw less type terminals : Rs. 2125/- (for 10 A rating) For screw less type terminals : Rs. 3175/- (for 16 A rating)
12.1(Terminals)	-	0	---
12.2(Terminals)	-	0	---
12.2.1(Terminals)	-	0	---
12.2.2(Connection of conductor)	-	0	---
12.2.3(Mechanical strength of terminals)	-	0	---
12.2.4(Resistance to corrosion)	-	0	---
12.2.5(Undue damage to conductor)	-	0	---
12.2.6(Terminals)	-	0	---
12.2.7(Insertion of conductor)	-	0	---
12.2.8(Terminals)	-	0	---
12.2.9(Locking against accidental loosening)	-	0	---
12.2.10(Terminals)	-	0	---
12.2.11(Distance between screw and conductor)	-	0	---
12.2.12(Terminals)	-	0	---
12.3(Terminals)	-	0	---
12.3.1(Terminals)	-	0	---
12.3.2(Screwless terminals)	-	0	---
12.3.3(Connectin of conductor)	-	0	---
12.3.4(Material of terminals)	-	0	---
12.3.5(Clamping)	-	0	---
12.3.6(Terminals)	-	0	---
12.3.7(v) Interconnection of conductors [Cl. 12.3.7])	-	0	---
12.3.8(Terminals)	-	0	---
12.3.9(Terminals)	-	0	---
12.3.10(Terminals)	-	0	---
12.3.11.a(Terminals)	-	0	---
12.3.11.b(Terminals)	-	0	---
12.3.12(Terminals)	-	0	---
13(Constructional requirements )	-	100	Test charge for cl. no. 13 is Rs. 100/-
13.1(Constructional requirements )	-	0	Test charge for cl. no. 13 is Rs. 100/-
13.2(Constructional requirements )	-	0	Test charge for cl. no. 13 is Rs. 100/-
13.3(Constructional requirements )	-	0	Test charge for cl. no. 13 is Rs. 100/-
13.3.1(Constructional requirements )	-	0	Test charge for cl. no. 13 is Rs. 100/-
13.3.2(Constructional requirements )	-	0	Test charge for cl. no. 13 is Rs. 100/-
13.3.3(Constructional requirements )	-	0	Test charge for cl. no. 13 is Rs. 100/-
13.4(Constructional requirements )	-	0	Test charge for cl. no. 13 is Rs. 100/-
13.5(Constructional requirements )	-	0	Test charge for cl. no. 13 is Rs. 100/-
13.6(Constructional requirements )	-	0	Test charge for cl. no. 13 is Rs. 100/-
13.7(Constructional requirements )	-	0	Test charge for cl. no. 13 is Rs. 100/-
13.8(Constructional requirements )	-	0	Test charge for cl. no. 13 is Rs. 100/-
13.9(Constructional requirements )	-	0	Test charge for cl. no. 13 is Rs. 100/-
13.1(Constructional requirements )	-	0	Test charge for cl. no. 13 is Rs. 100/-
13.11(Constructional requirements )	-	0	Test charge for cl. no. 13 is Rs. 100/-
13.12(Constructional requirements )	-	0	Test charge for cl. no. 13 is Rs. 100/-
13.13(Constructional requirements )	-	0	Test charge for cl. no. 13 is Rs. 100/-
13.14(Constructional requirements )	-	0	Test charge for cl. no. 13 is Rs. 100/-
13.15(Constructional requirements )	-	0	Test charge for cl. no. 13 is Rs. 100/-
13.15.1(Constructional requirements )	-	0	Test charge for cl. no. 13 is Rs. 100/-
13.15.2(Constructional requirements )	-	0	Test charge for cl. no. 13 is Rs. 100/-
14(Mechanism [Cl. 14])	-	100	Test charge for cl. no. 14 is Rs. 100/-
14.1(Mechanism)	-	0	Test charge for cl. no. 14 is Rs. 100/-
14.2(Mechanism)	-	0	Test charge for cl. no. 14 is Rs. 100/-
14.3(Mechanism)	-	0	Test charge for cl. no. 14 is Rs. 100/-
14.4(Mechanism)	-	0	Test charge for cl. no. 14 is Rs. 100/-
14.5(Mechanism)	-	0	Test charge for cl. no. 14 is Rs. 100/-
14.6(Mechanism)	-	0	Test charge for cl. no. 14 is Rs. 100/-
15(Resistance to ageing, to harmful ingress of water and to humidity )	-	1500	Test charge for cl. no. 15 is Rs. 1500/-
15.1(Resistance to ageing, to harmful ingress of water and to humidity )	-	0	Test charge for cl. no. 15 is Rs. 1500/-
15.2(Resistance to ageing, to harmful ingress of water and to humidity )	-	0	Test charge for cl. no. 15 is Rs. 1500/-
15.2.1(Resistance to ageing, to harmful ingress of water and to humidity )	-	0	Test charge for cl. no. 15 is Rs. 1500/-
15.2.2(Resistance to ageing, to harmful ingress of water and to humidity )	-	0	Test charge for cl. no. 15 is Rs. 1500/-
15.2.3(Resistance to ageing, to harmful ingress of water and to humidity )	-	0	Test charge for cl. no. 15 is Rs. 1500/-
15.3(Resistance to ageing, to harmful ingress of water and to humidity )	-	0	Test charge for cl. no. 15 is Rs. 1500/-
16(Insulation resistance and electric strength )	-	100	Test charge for cl. no. 16 is Rs. 100/-
16.1(Insulation resistance [Cl. 16.1])	-	0	Test charge for cl. no. 16 is Rs. 100/-
16.2( Electric Strength [Cl. 16.2])	-	0	Test charge for cl. no. 16 is Rs. 100/-
16.3(Insulation resistance and electric strength )	-	0	Test charge for cl. no. 16 is Rs. 100/-
17(Temperature- rise [Cl. 17])	-	500	Test charge for cl. no. 17 is Rs. 500/-
18(Marking and breaking Capacity[Cl. 18])	-	500	Test charge for cl. no. 18 is Rs. 500/-
18.1(Making and breaking capacity )	-	0	Test charge for cl. no. 18 is Rs. 500/-
18.2(Making and breaking capacity )	-	0	Test charge for cl. no. 18 is Rs. 500/-
19(Normal Operation [Cl. 19] a) General & Operation)	-	0	---
19.1(Normal operation)	-	4600	up to 6 A rating : Rs. 1375/- For 10 A rating : Rs. 1600/- For 16 A rating : Rs. 2550/- For 20 A rating : Rs. 2650/- For 25 A rating : Rs. 3625/- For 32 A rating : Rs. 4150/- For 45 A rating : Rs. 4600/-
19.2(Normal operation)	-	1000	up to 10 A rating : Rs. 750/- For 16 A rating : Rs. 1000/-
20(Mechanical Strength Test [Cl. 20])	-	100	Test charge for cl. no. 20 is Rs. 100/-
20.1(Mechanical strength )	-	0	Test charge for cl. no. 20 is Rs. 100/-
20.2(Mechanical strength )	-	0	Test charge for cl. no. 20 is Rs. 100/-
20.3(Mechanical strength )	-	0	Test charge for cl. no. 20 is Rs. 100/-
20.4(Mechanical strength )	-	0	Test charge for cl. no. 20 is Rs. 100/-
20.4.1(Mechanical strength )	-	0	Test charge for cl. no. 20 is Rs. 100/-
20.4.2(Mechanical strength )	-	0	Test charge for cl. no. 20 is Rs. 100/-
20.5 & 24.4.1(Mechanical strength )	-	0	Test charge for cl. no. 20 is Rs. 100/-
20.5 & 24.4.2(Mechanical strength )	-	0	Test charge for cl. no. 20 is Rs. 100/-
20.6 & 24.4.1(Mechanical strength )	-	0	Test charge for cl. no. 20 is Rs. 100/-
20.6 & 24.4.2(Mechanical strength )	-	0	Test charge for cl. no. 20 is Rs. 100/-
20.7(Mechanical strength )	-	0	Test charge for cl. no. 20 is Rs. 100/-
20.8(Mechanical strength )	-	0	Test charge for cl. no. 20 is Rs. 100/-
20.9(Mechanical strength )	-	0	Test charge for cl. no. 20 is Rs. 100/-
21(Resistance to Heat [Cl.21])	-	100	Test charge for cl. no. 21 is Rs. 100/-
21.1(Resistance to heat )	-	0	Test charge for cl. no. 21 is Rs. 100/-
21.2(Resistance to heat )	-	0	Test charge for cl. no. 21 is Rs. 100/-
21.3(Resistance to heat )	-	0	Test charge for cl. no. 21 is Rs. 100/-
22(Screw, Current Carrying Part And Connection [Cl.22])	-	100	Test charge for cl. no. 22 is Rs. 100/-
22.1(Screws, current carrying parts and connections )	-	0	Test charge for cl. no. 22 is Rs. 100/-
22.2(Screws, current carrying parts and connections )	-	0	Test charge for cl. no. 22 is Rs. 100/-
22.3(Screws, current carrying parts and connections )	-	0	Test charge for cl. no. 22 is Rs. 100/-
22.4(Screws, current carrying parts and connections )	-	0	Test charge for cl. no. 22 is Rs. 100/-
22.5(Screws, current carrying parts and connections )	-	0	Test charge for cl. no. 22 is Rs. 100/-
22.6(Screws, current carrying parts and connections )	-	0	Test charge for cl. no. 22 is Rs. 100/-
22.7(Screws, current carrying parts and connections )	-	0	Test charge for cl. no. 22 is Rs. 100/-
23(Creepage distances, clearances and distance through sealing compound [Cl.23])	-	100	Test charge for cl. no. 23 is Rs. 100/-
23.1(Creepage distances, clearances & distance through sealing compound )	-	0	Test charge for cl. no. 23 is Rs. 100/-
23.2(Creepage distances, clearances & distance through sealing compound )	-	0	Test charge for cl. no. 23 is Rs. 100/-
24(Resistance of insulating material to abnormal heat, to fire and to tracking )	-	700	Test charge for cl. no. 24 is Rs. 700/-
24.1(Resistance of insulating material to abnormal heat, to fire and to tracking )	-	0	Test charge for cl. no. 24 is Rs. 700/-
24.1.1(Resistance to Abnormal Heat & Fire [Cl.24.1] [Glow Wire Test] [Cl.24.1.1])	-	0	Test charge for cl. no. 24 is Rs. 700/-
24.2(Resistance to tracking [For Switch other than ordinary] [Cl.24.2])	-	500	---
25 of IS 3854 : 1997(Resistance to rusting)	-	125	---

Complete

30 Nov, 2025

-
-

IS 371 (1999)

Ceiling roses - Specification (Third Revision)

Surface and semi-recessed type

8550 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9(Marking)	-	275	---
10.1(Dimentions)	-	275	Test charge of cl. no. 10 is Rs. 275/-
10.2(Dimentions)	-	0	Test charge of cl. no. 10 is Rs. 275/-
10.2(Dimentions)	-	0	Test charge of cl. no. 10 is Rs. 275/-
11.1(Accessibility of live parts )	-	275	Test charge of cl. no. 11 is Rs. 275/-
11.2(Accessibility of live parts )	-	0	Test charge of cl. no. 11 is Rs. 275/-
11.3(Accessibility of live parts )	-	0	Test charge of cl. no. 11 is Rs. 275/-
11.4(Accessibility of live parts )	-	0	Test charge of cl. no. 11 is Rs. 275/-
11.4.1(Accessibility of live parts )	-	0	Test charge of cl. no. 11 is Rs. 275/-
12.1(Provision for Earthing)	-	275	Test charge of cl. no. 12 is Rs. 275/-
12.2(Provision for Earthing)	-	0	Test charge of cl. no. 12 is Rs. 275/-
13.1(Terminals)	-	1800	TERMINALS - SCREW TYPE : Rs. 500 /- TERMINALS - SCREW LESS: Rs. 1800/-
13.2(Terminals)	-	0	included in cl. no. 13.1
13.3(Terminals)	-	0	included in cl. no. 13.1
13.4(Terminals)	-	0	included in cl. no. 13.1
13.5(Terminals)	-	0	included in cl. no. 13.1
13.6(Terminals)	-	0	included in cl. no. 13.1
13.7(Terminals)	-	0	included in cl. no. 13.1
13.8.1(Terminals)	-	0	included in cl. no. 13.1
13.8.2(Terminals)	-	0	included in cl. no. 13.1
13.8.3(Terminals)	-	0	included in cl. no. 13.1
14.1(Construction)	-	275	Test charge of cl. no. 14 is Rs. 275/-
14.2(Construction)	-	0	Test charge of cl. no. 14 is Rs. 275/-
14.3(Construction)	-	0	Test charge of cl. no. 14 is Rs. 275/-
14.4(Construction)	-	0	Test charge of cl. no. 14 is Rs. 275/-
15.1(RESISTANCE TO MOISTURE AND HUMIDITY, INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	1550	Test charge of cl. no. 15 is Rs. 1550/-
15.2(RESISTANCE TO MOISTURE AND HUMIDITY, INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	0	Test charge of cl. no. 15 is Rs. 1550/-
15.3(RESISTANCE TO MOISTURE AND HUMIDITY, INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	0	Test charge of cl. no. 15 is Rs. 1550/-
15.4(RESISTANCE TO MOISTURE AND HUMIDITY, INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	0	Test charge of cl. no. 15 is Rs. 1550/-
15.5(RESISTANCE TO MOISTURE AND HUMIDITY, INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	0	Test charge of cl. no. 15 is Rs. 1550/-
15.6(RESISTANCE TO MOISTURE AND HUMIDITY, INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	0	Test charge of cl. no. 15 is Rs. 1550/-
15.7(RESISTANCE TO MOISTURE AND HUMIDITY, INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	0	Test charge of cl. no. 15 is Rs. 1550/-
16(Temperature Rise Test)	-	600	Test charge of cl. no. 16 is Rs. 600/-
17(Temperature Rise Test)	-	275	Test charge of cl. no. 17 is Rs. 275/-
18(Resistance to heat)	-	275	Test charge of cl. no. 18 is Rs. 275/-
19(Resistance to abnormal heat fire and tracking)	-	1650	Test charge of cl. no. 19 is Rs. 1650/-
19.2(Resistance to abnormal heat fire and tracking)	-	0	Test charge of cl. no. 19 is Rs. 1650/-
19.3(Resistance to abnormal heat fire and tracking)	-	500	Test charge of cl. no. 19 is Rs. 1650/-
20.1(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	275	Test charge of cl. no. 20 is Rs. 275/-
20.2(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	0	Test charge of cl. no. 20 is Rs. 275/-
20.3(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	0	Test charge of cl. no. 20 is Rs. 275/-
21.1(CREEPAGE DISTANCE AND CLEARANCES)	-	275	Test charge of cl. no. 21 is Rs. 275/-
22.1(Resistance to Excessive residual Stress and to Rusting )	-	450	Test charge of cl. no. 22 is Rs. 450/-
22.1(Resistance to Excessive residual Stress and to Rusting )	-	0	Test charge of cl. no. 22 is Rs. 450/-
22.1(Resistance to Excessive residual Stress and to Rusting )	-	0	Test charge of cl. no. 22 is Rs. 450/-

Complete

30 Nov, 2025

-
-

IS 7098 : Part 1 (1988)

Specification for crosslinked polyethylene insulated pvc sheathed cables: Part 1 for working voltages up to and including 1100 volts (First Revision)

122200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.2(Thickness of Insulation - Average)	-	1300	-
9.3(Thickness of Insulation - Minimum)	-	1300	-
14.3(Thickness of outer sheath - AVERAGE)	-	1300	-
14.3(Thickness of outer sheath - minimum)	-	1300	-
15.1 a) i)(Annealing Test ( For copper wire ) )	-	600	-
15.1 a) ii)(Tensile test (for aluminium) - Before stranding )	-	600	-
15.1 a) iii)(Wrapping test (for aluminium))	-	600	-
15.1 a) iv)(Resistance test - Main conductor)	-	700	-
15.1 a) iv)(Resistance test - Neutral conductor)	-	700	-
15.1 d) i) (Phyaical tests for insulation : Tensile Test)	-	2000	-
15.1 d) i) (Phyaical tests for insulation : Elongation)	-	2000	-
15.1 d) ii) (Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	7000	-
15.1 d) ii) (Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-	7000	-
15.1 d) iii) (Phyaical tests for insulation : Hot set )	-	600	-
15.1 d) iii) (Phyaical tests for insulation : Permanent set )	-	600	-
15.1 d) iv) (Phyaical tests for insulation : Shrinkage )	-	900	-
15.1 e) iv) (Phyaical tests for Sheath : Shrinkage - Crack observed )	-	900	-
15.1 d) v) (Insulation: Waterabsorption(gravimetric))	-	10000	-
15.1 e) i) (Physical tests for outer sheath : Tensile stregth)	-	1000	-
15.1 e) i) (Physical tests for outer sheath : Elongation)	-	1000	-
15.1 e) ii) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-	7000	-
15.1 e) ii) (Physical tests for outer sheath -Ageing in air oven : Elongation )	-	7000	-
15.1 e) ii) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-	7000	-
15.1 e) ii) (Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-	7000	-
15.1 e) iii) (Sheath: Loss of mass in air oven)	-	7000	-
15.1 e) iv) (Phyaical tests for Sheath : Shrinkage )	-	900	-
15.1 e) v) (Sheath : Hot deformation)	-	1700	-
15.1 e) vi) (Sheath : Heat shock test)	-	900	-
15.1 e) vii) (Sheath : Thermalstability)	-	1500	-
15.1 f)(INSULATION RESISTANCE TEST : Volume resistivity )	-	2700	-
16.2(HIGH VOLTAGE TEST )	-	1000	-
16.3(FLAMMABILITY TEST : Period of Burning )	-	1500	-
16.3(FLAMMABILITY TEST : Unaffected length )	-	1500	-
16.9(Oxygen Index Test)	-	3500	-
16.1(Flame Retardance Test on Single Cables)	-	6500	-
16.11(Flame Retardance Test on Bunched Cables)	-	9200	-
16.13(Test for Halogen Acid Gas Evolution)	-	4500	-
16.14(Temperature Index)	-	5500	-
Table 2(Cold bend test for Outer sheath)	-	3000	-
Table 2(Cold Impact test for Outer sheath)	-	3000	-
13.3(Armouring : Dimensions -Wire Diameter)	-	489	-
13.3(Armouring : Dimensions -Formed wire )	-	489	-
13.6 a)(ARMOURING: Tensile Strength)	-	489	-
13.6 b)(ARMOURING: Elongation )	-	489	-
13.6 c)(ARMOURING: Torsion Test (For round wire ) )	-	489	-
13.6 e)(ARMOURING: Uniformity of zinc coating)	-	489	-
13.6 d)(ARMOURING: Winding Test(For formed wire))	-	489	-
13.6 f)(ARMOURING: Mass of zinc coating )	-	489	-
13.6 g)(ARMOURING: Resistivity)	-	489	-

Complete

30 Nov, 2025

-
-

IS 4159 (2021)

Mineral Filled Sheathed Heating Elements

Air and water heaters up to and including 5 kW

20150 View breakup
Rs. 20,150/- upto 5 kW.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 33.1 of IS 4159:2002(Finish Test )	-	0	---
Cl.18 of IS 4159:2002(Endurance Test )	-	0	---
"Cl. 6 IS 4159:2021"(Classification)	-	0	---
"Cl. 8 IS 4159:2021"(Protection against access to live parts)	-	500	Total Test charges for cl. no. 8 is Rs. 500/-
"Cl. 9 IS 4159:2021"(Starting of motor operated appliances)	-	0	---
"Cl. 10 IS 4159:2021"(Power Input and Current)	-	500	Total Test charges for cl. no. 10 is Rs. 500/-
"Cl. 11 IS 4159:2021"(Heating)	-	650	Total Test charges for cl. no. 11 is Rs. 650/-
"Cl. 13 IS 4159:2021"(Leakage Current & Electrical Strength at Operating Temperature)	-	500	Total Test charges for cl. no. 13 is Rs. 500/-
"Cl. 14 IS 4159:2021"(Transient Over Voltage)	-	1800	Total Test charges for cl. no. 14 is Rs. 1800/-
"Cl. 15 IS 4159:2021"(Moisture Resistance)	-	2550	Total Test charges for cl. no. 15 is Rs. 2550/-
"Cl. 16 IS 4159:2021"(Leakage Current and Electric strength)	-	500	Total Test charges for cl. no. 16 is Rs. 500/-
"Cl. 17 IS 4159:2021"(Overload protection of transformers and associated circuits.)	-	0	---
"Cl. 18 IS 4159:2021"(Endurance)	-	3450	Total Test charges for cl. no. 18 is Rs. 3450/-
"Cl. 19 IS 4159:2021"(Abnormal Operation)	-	650	Total Test charges for cl. no. 19 is Rs. 650/-
"Cl. 20 IS 4159:2021"(Stability and mechanical Hazards)	-	500	Total Test charges for cl. no. 20 is Rs. 500/-
"Cl. 21 IS 4159:2021"(Mechanical Strength)	-	500	Total Test charges for cl. no. 21 is Rs. 500/-
"Cl. 22 IS 4159:2021"(Construction)	-	500	Total Test charges for cl. no. 22 is Rs. 500/-
"Cl. 23 IS 4159:2021"(Internal Wiring)	-	500	Total Test charges for cl. no. 23 is Rs. 500/-
"Cl. 24 IS 4159:2021"(Components)	-	500	Total Test charges for cl. no. 24 is Rs. 500/-
"Cl. 25 IS 4159:2021"(Supply Connections and External Flexible Cables and Cords)	-	1000	Total Test charges for cl. no. 25 is Rs. 1000/-
"Cl. 26 IS 4159:2021"(Terminal For External Conductors)	-	500	Total Test charges for cl. no. 26 is Rs. 500/-
"Cl. 27 IS 4159:2021"(Provision For Earthing)	-	500	Total Test charges for cl. no. 27 is Rs. 500/-
"Cl. 28 IS 4159:2021"(Screws and Connections)	-	500	Total Test charges for cl. no. 28 is Rs. 500/-
"Cl. 29 IS 4159:2021"(Creepage Distances, Clearances And Distances Through Insulation)	-	500	Total Test charges for cl. no. 29 is Rs. 500/-
"Cl. 30 IS 4159:2021"(Resistance To Heat, Fire And Tracking)	-	2550	Total Test charges for cl. no. 30 is Rs. 2550/-
"Cl. 31 IS 4159:2021"(Resistance To Rusting)	-	500	Total Test charges for cl. no. 31 is Rs. 500/-

Complete

30 Nov, 2025

-
Exclusion: Cl. 102 IS 4159:2021" (Leakage and hydrostatic strength (for oil heating elements)), Cl. 19 IS 4159:2021" (Abnormal Operation)

IS 8034 (2018)

Submersible pumpsets - Specification (Third Revision)

Voltage: up to 440V Rated power: up to110 kW, Size: 6''

53100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1 (a)(Constructional Features)	-	3000	-
6.1 (b)(Constructional Features)	-	3000	-
6.1 (c)(Constructional Features)	-	3000	-
6.1 (d)(Constructional Features)	-	3000	-
6.1 (e)(Constructional Features)	-	3000	-
6.1 (f)(Constructional Features)	-	3000	-
6.2 (a)(Material of construction Part Sub Assembly Shaft Sleeve)	-	3000	-
6.2 (b)(Material of construction Part Sub Assembly Casing wear ring (if provided))	-	3000	-
6.2 (c)(Material of construction Part Sub Assembly Bush)	-	3000	-
6.2 (d)(Material of construction Part Sub Assembly Discharge casing (if provided))	-	3000	-
6.2 (e)(Material of construction Part Sub Assembly Impeller)	-	3000	-
6.2 (f)(Material of construction Part Sub Assembly Pump Bowl/Diffuser)	-	3000	-
6.2 (g)(Material of construction Part Sub Assembly Pump Shaft)	-	3000	-
6.2 (h)(Material of construction Part Sub Assembly Suction Casing)	-	3000	-
6.2.2.1(Gaskets, Seals and Packings)	-	3000	-
6.2.2.2(Gaskets, Seals and Packings)	-	3000	-
6.2.3(Gaskets, Seals and Packings)	-	3000	-
6.2.4(Gaskets, Seals and Packings)	-	3000	-
6.2.5(Gaskets, Seals and Packings)	-	3000	-
7.1.1(Design features: Typical design features 0f components of pump)	-	0	-
7.1.2(Design features: Typical design features 0f components of pump)	-	0	-
7.1.3(Design features: Typical design features 0f components of pump)	-	0	-
7.1.4(Design features: Typical design features 0f components of pump)	-	0	-
7.1.5(Design features: Typical design features 0f components of pump)	-	0	-
7.1.6(Design features: Typical design features 0f components of pump)	-	0	-
14(Marking)	-	500	-
14(Marking)	-	500	-
14(Marking)	-	500	-
14(Marking)	-	500	-
14(Marking)	-	500	-
14(Marking)	-	500	-
14(Marking)	-	500	-
14(Marking)	-	500	-
14(Marking)	-	500	-
14(Marking)	-	500	-
14(Marking)	-	500	-
14(Marking)	-	500	-
14(Marking)	-	500	-
14(Marking)	-	500	-
14(Marking)	-	500	-
14(Marking)	-	500	-
14(Marking)	-	500	-
14(Marking)	-	500	-
8.3(Impeller)	-	0	-
8.4.1(Shaft)	-	0	-
8.4.2(Shaft)	-	800	-
8.5.1(Balancing)	-	2700	-
8.5.2(Balancing)	-	2700	-
8.7.1(Direction of Rotation)	-	400	-
8.7.2(Direction of Rotation)	-	400	-
8.8(Terminal Marking)	-	0	-
8.9.1(Typical Installation)	-	500	-
8.9.3(Typical Installation)	-	500	-
10.3(Hydrostatic Pressure Test)	-	2300	-
11.1.1(Guarantee of Performance)	-	0	-
11.1.2(Guarantee of Performance)	-	0	-
11.1.2(Guarantee of Performance)	-	0	-
11.1.3(Guarantee of Performance)	-	0	-
11.1.4(Guarantee of Performance)	-	0	-
11.1.5(Guarantee of Performance)	-	0	-
8.6(Submersible cable)	-	700	-
7.1.10(Voltage & Frequency variation)	-	0	-
10(Pump Performance test)	-	12000	-
11(Guarantee of Performance)	-	0	-
9.10 (a)(Insulation Resistance test)	-	550	-
9.10 (b)(High Voltage test)	-	550	-
9.10 (c)(Measurement of Stator Resistance)	-	500	-
9.10 (d)(No Load Test at Rated Voltage)	-	1200	-
9.10 (e)(Reduced voltage Running up test)	-	800	-
9.10 (f) & (g)(Locked Rotor Test)	-	3000	-
9.10 (h)(Leakage current test)	-	1000	-
9.10 (j)(Temperature Rise Test at Rated Voltage)	-	12000	-
9.10 (k)(Temperature rise test at reduced voltage)	-	9000	-
8.6.1(Flat/Round cables as per IS694 shall be used)	-	0	-
8.6.2(The size of the conductor shall be adequate and suitable for contineous use under water and in air. the length of the cable shall be minimum 2 m externallly unless otherwise specified by the customer)	-	0	-
8.6.3(The size and of the cable should be suitably selected so that the voltage drop between control panel and the mptor terminal does not exeed three percent of the rated voltage)	-	0	-
8.6.4(In case a joint is required to be made between the lead cable supplied with the motor and the user’s cable, a detailed procedure to make water tight joining shall be supplied by the motor manufacturer.)	-	0	-
8.9.4.1(Earthing of the motor shall be done as per IS 9283 in accordance with the relevant provisions of IS 3043.)	-	400	-
8.9.4c(Earthing)	-	500	-

Complete

30 Nov, 2025

-
-

IS 9079 (2018)

Monoset pumps for clear, cold water for agricultural and water supply purposes - Specification (Third Revision)

Voltage: up to 440 V Power: up to 110 kW, Size: 5”

46346 View breakup
Up to 5.5kW : Rs. 8,875/- ; 5.5 kW to 11kW : Rs. 9,918/- ; 11 kW to 22 kW : Rs. 17,295/- ; 22.1 kW to 45 kW : Rs. 30,039/- ; 45.1 kW to 75 kW : Rs. 37,606/- ; 75.1 kW to 110 kW : Rs. 46,346/- .

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.1(GENERAL REQUIREMENTS Casing)	-	1725	Nil
10.2(GENERAL REQUIREMENTS Impeller)	-	0	Nil
10.3(GENERAL REQUIREMENTS Shaft)	-	0	Nil
9.1(DESIGN FEATURES (Cl 9))	-	0	Nil
9.2(DESIGN FEATURES (Cl 9))	-	0	Nil
7.1(Material of Construction)	-	0	Nil
7.2(Gaskets.Seals and packings)	-	0	Nil
9.1.1(The pump may be equipped with replaceable bearing and wearing ring, wherever provided.)	-	0	Nil
9.1.2(The pump shall be capable to perform as per guaranteed duty point at the manometric suction lift as specified in Table 1.)	-	0	Nil
9.4(The pump efficiency of monoset pumps at duty point as declared by the manufacturer for 2 and 4 poles shall not be less than given in Fig. 3 to Fig. 6 and beyond this range, the efficiency shall be declared by manufacturer.)	-	0	Nil
10.4.1, 10.4.2, 10.4.3, 10.4.4(General Requirements(Balancing))	-	4600	Nil
10.5(Provision of Earthing)	-	0	Nil
10.6.2, 10.6.3(Direction of Rotation)	-	863	Nil
11.8.1(a)(Measurement of stator resistance)	-	690	Nil
11.8.1(b)(High Voltage test)	-	1380	Nil
11.8.1(c)(Insulation Resistance test)	-	1380	Nil
11.8.1(d)(No load test at rated voltage)	-	1380	Nil
11.8.1(e)(Locked rotor)	-	3450	Nil
11.8.1(g)(Reduced voltage running up test at no load)	-	863	Nil
11.8.1(h)(Temperature rise test at rated voltage)	-	11500	Nil
11.8.1(j)(Temperature rise test at reduced voltage)	-	9200	Nil
13.1.3(Monoset motor shall not get overloaded in the specified operating head range at rated voltage and supply frequency.)	-	8625	Nil
10.6.1(Terminal Marking)	-	0	Nil
13.1(Guarantee and tolerances on Pump Performance (Cl 13))	-	8625	Nil
15.1(Marking)	-	690	Nil
15.1(Marking)	-	690	Nil
15.1(Marking)	-	690	Nil
15.1(Marking)	-	690	Nil
15.1(Marking)	-	690	Nil
15.1(Marking)	-	690	Nil
15.1(Marking)	-	690	Nil
15.1(Marking)	-	690	Nil
15.1(Marking)	-	690	Nil
15.1(Marking)	-	690	Nil
15.1(Marking)	-	690	Nil
15.1(Marking)	-	690	Nil
15.1(Marking)	-	690	Nil
15.1(Marking)	-	690	Nil
15.1(Marking)	-	690	Nil
15.1(Marking)	-	690	Nil
15.1(Marking)	-	690	Nil
15.1(Marking)	-	690	Nil
13.5(Minimum Current Requirement)	-	8625	Nil

Complete

30 Nov, 2025

-
-

IS 1576 (1992)

Solid pressboard for electrical purposes - Specification (First Revision)

Grade: A, B, C and D

32200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.No.5.2(Thickness)	-	575	Same as above
Cl.No.5.4(Density)	-	1150	Same as above
Cl.No.5.5.1(Electric Strength (Proof Test) in air at 90°C)	-	3450	Same as above
Cl.No.5.5.2(Electric Strength (Proof Test) in Oil at 90°C)	-	4600	Same as above
Cl.No.5.6(Tensile Strength)	-	1150	Same as above
Cl.No.5.8.1(Shrinkage in air)	-	2300	Same as above
Cl.No.5.8.2(Shrinkage in Oil)	-	5750	Same as above
Cl.No.5.9(Flexibility)	-	575	Same as above
Cl.No.5.10(Cohesion between Piles)	-	575	Same as above
Cl.No.5.11(Oil Absorption)	-	3450	Same as above
Cl.No.5.12(Machinability)	-	575	Same as above
Cl.No.5.13(Conductivity of aqueous extract)	-	1725	Same as above
Cl.No.5.14(pH of aqueous extract)	-	1725	Same as above
Cl.No.5.15(Moisture Content)	-	2875	Same as above
Cl.No.5.16(Mineral Ash)	-	1725	Same as above

Complete

30 Nov, 2025

-
-

IS 9857 (1990)

Welding cables - Specification (First Revision)

28300 View breakup
Rs. 28,300/- (for type test) ; Multicore cables: additional charges Rs. 500/- per core per test.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.1 a) 1)(Annealing test - IS 10810: Part 1)	-	600	-
10.1 a) 2)(Conductor resistance tes - IS 10810 : Part 5)	-	700	-
9.2(T h i c k n e s s o f C o v e r i n g)	-	1200	-
10.1 c) 1)(Physical tests for covering : Tensile strength )	-	400	-
10.1 c) 1)(Physical tests for covering : Elongation at break )	-	400	-
10.1 c) 2)(Physical tests for covering - Ageing in Air oven : Tensile strength variation)	-	1588	-
10.1 c) 2)(Physical tests for covering -Ageing in Air oven : Elongation at break )	-	1588	-
10.1 c) 2)(Physical tests for covering - Ageing in Air oven : Tensile strength )	-	1588	-
10.1 c) 2)(Physical tests for covering -Ageing in Air oven : Elongation variation at break )	-	1588	-
10.1 c) 3)(Physical tests for covering - Ageing in Air Bomb : Tensile strength variation )	-	1150	-
10.1 c) 3)(Physical tests for covering -Ageing in Air Bomb : Elongation variation at break )	-	1150	-
10.1 c) 4)(Physical tests for covering - Oil Resistance : Tensile strength variation )	-	950	-
10.1 c) 4)(Physical tests for covering - Oil Resistance : Elongation variation at break )	-	950	-
10.1 c) 5)(Hot set test )	-	550	-
10.1 c) 5)(Permanent set )	-	550	-
11.1(High Voltage Test ( Water Immersion Test ))	-	900	-
11.3(Static Flexibility Test)	-	850	-
11.4(Flammability Test)	-	950	-
7(CONDUCTOR : CONSTRUCTION )	-	1550	-

Complete

30 Nov, 2025

-
-

IS 4289 : Part 2 (2000)

Flexible cables for lifts and other flexible connections - Specification: Part 2 pvc insulated circular cables

37900 View breakup
Type tests Rs. 37,900/- ; Multicore cables: additional charges Rs. 500/- per core per test.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
14.2(Thickness of Insulation)	-	500	NA
14.3(Tolerance on Thickness of Insulation)	-	500	NA
17.1.1(Thickness of Sheath)	-	500	NA
17.1.2(Tolerance on Thickness of Sheath)	-	500	NA
18.1.a.i(IS 10810 Part-1)	-	-	-
18.1.a.ii(IS 10810 Part-5)	-	-	-
18.1.b(IS 10810 Part-6)	-	-	-
18.1.c.i(IS 10810 Part-7)	-	-	-
18.1.c.i(IS 10810 Part-7)	-	-	-
18.1.c.ii(IS 10810 Part-11)	-	-	-
18.1.c.ii(IS 10810 Part-11)	-	-	-
18.1.c.iii(IS 10810 Part-10)	-	-	-
18.1.c.iii(IS 10810 Part-10)	-	-	-
18.1.c.iv(IS 10810 Part-14)	-	-	-
18.1.c.iv(IS 10810 Part-14)	-	-	-
18.1.c.v(IS 10810 Part-12)	-	-	-
18.1.c.v(IS 10810 Part-12)	-	-	-
18.1.c.vi(IS 10810 Part-60)	-	-	-
18.1.c.vi(IS 10810 Part-60)	-	-	-
18.1.d(IS 10810 Part-45)	-	-	-
18.1.e(IS 10810 Part-43)	-	-	-
18.1. f(IS 10810 Part-54)	-	-	-
18.1.g(IS 10810 Part-53)	-	-	-

Complete

30 Nov, 2025

-
-

IS 8783 : Part 4 : Sec 2 (1995)

Winding wires for submersible motors - specification: Part 4 specification for individual wires: Sec 2 crosslinked polyethylene insulated and polyamide jacketed wires (First Revision)

20750 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Thickness of insulation)	-	1200	-
4.3(Colour)	-	0	-
4.4(Overall diameter)	-	500	-
4.6(High voltage test)	-	900	-
4.6(High Voltage Test (Water Immersion ) )	-	900	-
Table 1, Cl.4.1, Cl.4.4(Conductor diameter)	-	500	-
Table 1, Cl.4.1, Cl.4.4(Thickness of PA jacket)	-	1200	-
3.2(Requirements(Cl. 4 Table 1 of IS: 8783 (part 2) Heat shock Test)	-	800	-
3.2(Requirements(Cl. 4 Table 1 of IS: 8783 (part 2) Hot deformation Test )	-	1200	-
3.2(Requirements(Cl. 4 Table 1 of IS: 8783 (part 2) Water absorption)	-	1850	-
3.2(Requirements(Cl. 4 Table 1 of IS: 8783 (part 2) Shrinkage Test)	-	400	-
3.2(Requirements(Cl. 4 Table 1 of IS: 8783 (part 2) Shrinkage Test)	-	400	-
3.2(Requirements(Cl. 4 Table 1 of IS: 8783 (part 2) Elongation Variation)	-	1588	-
3.2(Requirements(Cl. 4 Table 1 of IS: 8783 (part 2) After Ageing Elongation Test)	-	1588	-
3.2(Requirements(Cl. 4 Table 1 of IS: 8783 (part 2) Tensile strength Variation)	-	1588	-
3.2(Requirements(Cl. 4 Table 1 of IS: 8783 (part 2) After Ageing Tensile strength)	-	1588	-
3.2(Requirements(Cl. 4 Table 1 of IS: 8783 (part 2) Befor Ageing Elongation Test)	-	400	-
3.2(Requirements(Cl. 4 Table 1 of IS: 8783 (part 2) Befor Ageing Tensile strength)	-	400	-
3.2(Requirements(Cl. 4 Table 1 of IS: 8783 (part 2) Volume resistivity@ 85 °C)	-	600	-
3.2(Requirements(Cl. 4 Table 1 of IS: 8783 (part 2) Volume resistivity@Room Temprature )	-	600	-
3.1(Resistance Test ((Cl 6 of IS:8783(Part I):95 )	-	700	-
3.1(Annealing Test(Cl. 6 of IS:8783(Part I):95 )	-	1858	-

Complete

30 Nov, 2025

-
-

IS 14255 (1995)

Aertal bunched cables - For working voltages up to and including 1100 Volts - Specification

57150 View breakup
Rs. 57,150/- (for type test); Multicore cables: additional charges Rs. 500/- per core per test.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.1 a) i)(Tests on phase/street light conductor: tensile test - Test method IS10810:Part 2)	-	900	-
10.1 a) ii)(Wrapping test - 10810: Part 3)	-	500	-
10.1 a) iii)(Resistance test - IS10810: Part 5)	-	1300	-
10.1 b) i)(Test on messenger conductor: Breaking load - IS 10810: Part 2)	-	8000	-
10.1 b) ii)(Test on messenger conductor: Elongation test - Cl 11.3)	-	800	-
10.1 b) iii)(Test on messenger conductor: Resistance test - IS 10810: Part 5)	-	1300	-
10.1 c) i)(Physical tests for XLPE Insulation: Tensile strength - IS 10810: Part 7)	-	1000	-
10.1 c) i)(Physical tests for XLPE Insulation: elongation at break - IS 10810: part 7)	-	1000	-
10.1 c) ii)(Ageing in air oven : Tensile strength variation - IS 10810:Part 11)	-	4150	-
10.1 c) ii)(Ageing in air oven : Elongation variation- IS 10810: Part 11)	-	4150	-
10.1 c) iii)(Hot set test: Elongation under load - IS 10810: Part 30)	-	625	-
10.1 c) iii)(Hot set test: Permanent elongation (set) after cooling - IS 10810: Part 30)	-	625	-
10.1 c) iv)(Shrinkage test : Shrinkage - 10810:Part 12)	-	650	-
10.1 c) iv)(Shrinkage test : Crack Observed - 10810:Part 12)	-	650	-
10.1 c) v)(Water ahsorption (Gravimetric) - IS 10810: Part 33 )	-	10000	-
10.1 d) i)(Physical test for PE insulation: Tensile strength - IS 10810: Part 7 )	-	1000	-
10.1 d) i)(Physical test for PE insulation: elongation at break - IS 10810: Part 7)	-	1000	-
10.1 d) ii)(Melt flow index- IS 10810: Part 23)	-	2150	-
10.1 d) iv)(Vicat softening point -IS 10810: Part 22)	-	2150	-
10.1 d) v)(Environmental stress cracking -IS 10810:Part29)	-	1700	-
10.1 f)(Insulation resistance (Volume resistivity) test a) volume resistivity at 27°C - IS 10810: Part 43)	-	1350	-
10.1 f)(Insulation resistance (Volume resistivity) test b) volume resistivity at 70°C - IS 10810: Part 43)	-	1350	-
10.1 g)(High voltage test - IS10810:Part 45)	-	1550	-
11.4(Bending Test on the Completed Cable ( Optional) )	-	2300	-
7.2( Thickness of insulation)	-	1550	-

Complete

30 Nov, 2025

-
-

IS 9335 : Part 3 : Sec 5 (1985)

Specification for cellulosic papers for electrical purposes: Part 3 specifications for individual materials: Sec 5 special papers

All

41883 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5, Table 5 to 8(Thickness)	-	575	-
5, Table 5 to 8(Substance)	-	1150	-
5, Table 5 to 8(Apparent density)	-	1725	-
5, Table 5 to 8(Tensile strength)	-	1725	-
5, Table 5 to 8(elongation)	-	0	Test Charges included in Tensile Strength test.
5, Table 5 to 8(Internal tearing resistance)	-	1725	-
5, Table 5 to 8(Bursting strength)	-	1150	-
5, Table 5 to 8(Moisture Content)	-	1150	-
5, Table 5 to 8(Ash)	-	1725	-
5, Table 5 to 8(Conductivity of Aqueous Extract)	-	1725	-
5, Table 5 to 8(pH of Aqueous Extract)	-	1725	-
5, Table 5 to 8(Air permeability)	-	1150	-
5, Table 5 to 8(Water absorption)	-	920	-
5, Table 5 to 8(Electric strength)	-	1150	-
5, Table 5 to 8(Dissipation factor of dry un impregnated paper)	-	2875	-
5, Table 5 to 8(Heat Stability)	-	21413	-
5, Table 5 to 8(Thickness)	-	575	-
5, Table 5 to 8(Substance)	-	1150	-
5, Table 5 to 8(Apparent density)	-	1725	-
5, Table 5 to 8(Tensile strength)	-	1725	-
5, Table 5 to 8(elongation)	-	0	Test Charges included in Tensile Strength test.
5, Table 5 to 8(Internal tearing resistance)	-	1725	-
5, Table 5 to 8(Bursting strength)	-	1150	-
5, Table 5 to 8(Moisture Content)	-	1150	-
5, Table 5 to 8(Ash)	-	1725	-
5, Table 5 to 8(Conductivity of Aqueous Extract)	-	1725	-
5, Table 5 to 8(pH of Aqueous Extract)	-	1725	-
5, Table 5 to 8(Air permeability)	-	1150	-
5, Table 5 to 8(Water absorption)	-	920	-
5, Table 5 to 8(Electric strength)	-	1150	-
5, Table 5 to 8(Dissipation factor of dry un impregnated paper)	-	2875	-
5, Table 5 to 8(Heat Stability)	-	21413	-

Complete

30 Nov, 2025

-
-

IS 13730 : Part 9 (1994)

Specification for particular types of winding wires: Part 9 polyester enamelled round aluminium wire, class 138

831950 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause No. 4(Dimensions)	-	500	-
Clause No. 5(Electrical resistance)	-	600	-
Clause No. 6(Elongation %)	-	600	-
Clause No. 8(Flexibility and adherence (i) Mandrel winding test)	-	225	-
Clause No. 8(Flexibility and adherence (ii) Stretching test)	-	225	-
Clause No. 8(Flexibility and adherence (iii) Jerk test)	-	225	-
Clause No. 8(Flexibility and adherence (iv) Peel test)	-	225	-
Clause No. 9(Heat Shock test)	-	800	-
Clause No. 10(Cut through test)	-	850	-
Clause No. 11(Resistance to Abrasion test)	-	850	-
Clause No. 12(Resistance to solvent test)	-	850	-
Clause No. 13(Breakdown voltage test)	-	1800	-
Clause No. 15(Temperature index test)	-	821600	-

Complete

30 Nov, 2025

-
-

IS 13730 : Part 16 (1996)

Specifications for particular types of winding wires: Part 16 polyester enamelled rectangular copper wire class 155

830500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause No. 4(Dimensions)	-	500	-
Clause No. 5(Electrical resistance)	-	600	-
Clause No. 6(Elongation %)	-	600	-
Clause No. 7()	-	500	-
Clause No. 8(Flexibility and adherence (i) Mandrel winding test)	-	225	-
Clause No. 8(Flexibility and adherence (ii) Stretching test)	-	225	-
Clause No. 8(Flexibility and adherence (iii) Jerk test)	-	225	-
Clause No. 8(Flexibility and adherence (iv) Peel test)	-	225	-
Clause No. 9(Heat Shock test)	-	800	-
Clause No. 12(Resistance to solvent test)	-	850	-
Clause No. 13(Breakdown voltage test)	-	1800	-
Clause No. 15(Temperature index test)	-	821600	-

Complete

30 Nov, 2025

-
-

First
Prev
1
2
3
4
Next
Last

Bureau of Indian Standards

The National Standards Body of India

Electrical Research and Development Association, gujarat

ERDA Road, GIDC, Makarpura, Vadodara, VADODARA, Vadodara, Gujarat, 390010

9987940719 uday.puntambekar@erda.org

Scope List