BIS - LIMS (Laboratory Information Management System)

LUCID LABORATORIES PRIVATE LIMITED

PLOT NO.3, IDA,, BALANAGAR, HYDERABAD, Medchal Malkajgiri, Telangana, 500037

9848163346 info@lucidlabsindia.com

Scope List

Reset

31 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 1161 (2014)

Steel tubes for structural purposes - Specification (Fifth Revision)

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5 AND AS PER IS 10748(CARBON)	-	300	-
Clause - 5.1, Table-3(SULPHUR)	-	300	-
Clause - 5.1, Table-3(PHOSPHURS)	-	300	-
Clause - 5.1, Table-3(MANGANESE)	-	300	-
Clause - 5.1, Table-3(SILICON)	-	300	-
Clause - 5.1, Table-3( ALUMINIUM)	-	300	-
5 AND AS PER IS 10748(CARBON EQUIVALENT)	-	300	-
5 AND AS PER IS 10748(MICRO ALLOY)	-	500	-
Cl 6(Outer Diameter, Thickness & Mass)	-	500	-
Cl 7(Workmanship)	-	500	-
8 AND AS PER IS 4736(MASS OF ZINC COATING)	-	1000	-
8 AND AS PER IS 4736(UNIFORMITY OF ZINC COATING)	-	1000	-
9(Straightness)	-	500	-
10(Lengths)	-	500	-
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	300	-
Cl. 11.2 Table 2(Yield strength)	-	250	-
Clause 11.2, Table -2(Elongation)	-	250	-
Cl 11.3.1(Cold bend test (upto & including 50 mm NB))	-	500	-
Cl 11.3.1(Flattening test (over 50 mm NB))	-	600	-

Complete

IS 15500 : Part 1 to 8 (2004)

Deepwell handpumps, components and special tools - Specification

97000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2/2.3,(Refer 15500(Part 1 to 8)& 5 (Part 1)(Raw material)	-	1000	NIL
2/2.3,(Refer 15500(Part 1 to 8)& 9.4 (Part 1)(Dimensions & critical dimensions in conformance with the relevant figures in Part 4.)	-	900	NIL
2/2.3,(Refer fig 4.1 of Part4) & 9.4 (Part 1)(Dimensions of FIG.4.1 HEAD— STANDARD(For SDWP, VLOM-65 and VLOM-50))	-	900	NIL
2/2.3,(Refer fig 4.2 of Part4)(Dimensions of FIG. 4,2 HEAD— EWDP)	-	900	NIL
2/2.3,(Refer fig 4.3A of Part4)(Dimensions of Fig 4.3A Side Plate)	-	900	NIL
2/2.3,(Refer fig 4.3B of Part4)(Dimensions of Fig 4.3B Head Flange)	-	900	NIL
2/2.3,(Refer fig 4.3C of Part4)(Dimensions of Fig 4.3C Back Plate —Standard (For SDWP, VLOM-65 & VLOM-50))	-	500	NIL
2/2.3,(Refer fig 4.3D of Part4)(Dimensions of Fig 4.3D Bracket — Standard (For SDWP, VLOM-65 & VLOM-50))	-	500	NIL
2/2.3,(Refer fig 4.3E of Part4)(Dimensions of Fig 4.3E Back Plate — EDWP)	-	500	NIL
2/2.3,(Refer fig 4.3F of Part4)(Dimensions of Fig 4.3F Bracket — EDWP)	-	500	NIL
2/2.3,(Refer fig 4.3G of Part4)(Dimensions of Fig 4.3G Axle Bust — Right)	-	500	NIL
2/2.3,(Refer fig 4.3H of Part4)(Dimensions of Fig 4.3H Axle Bust — Left)	-	500	NIL
2/2.3,(Refer fig 4.3I of Part4)(Dimensions of Fig 4.3 I Front Top End Plate)	-	500	NIL
2/2.3,(Refer fig 4.3IJof Part4)(Dimensions of 4.3J Front Bottom End Plate)	-	500	NIL
2/2.3,(Refer fig 4.3IKof Part4)(Dimensions of Fig 4.3K Gusset — Standard w (For SDWP, VLOM-65 & VLOM-50))	-	500	NIL
2/2.3,(Refer fig 4.3L Jof Part4)(Dimensions of Fig 4.3L Gusset — EDWP (For EDWP) )	-	500	NIL
2/2.3,(Refer fig 4.4 Jof Part4)(Dimensions of FIG. 4.4 FRONTCOVER)	-	500	NIL
2/2.3,(Refer fig 4.5A of Part4)(Dimensions of FIG. 4.5A Flange for Third Plate)	-	500	NIL
2/2.3,(Refer fig 4.5 B of Part4)(Dimensions of FIG. 4.5B Guide Bush )	-	500	NIL
2/2.3,(Refer fig 4.6 of Part4)(Dimensions of FIG.4.6 HANDLE— STANDARD (For SDWP, VLOM-65 & VLOM-50))	-	500	NIL
2/2.3,(Refer fig 4.7 of Part4)(Dimensions of FIG.4.7 HANDLE— EDWP)	-	500	NIL
2/2.3,(Refer fig 4.8A of Part4)(Dimensions of FIG 4.8A Handle Bar — Standard (For SDWR VLOM-65 & VLOM-50))	-	500	NIL
2/2.3,(Refer fig 4.8B of Part4)(Dimensions of FIG 4.8B Handle Bar — EDWP)	-	500	NIL
2/2.3,(Refer fig 4.8C of Part4)(Dimensions of FIG 4.8C Chain Guide)	-	500	NIL
2/2.3,(Refer fig 4.8 D of Part4)(Dimensions of Fig 4.8D Bearing Housing )	-	500	NIL
2/2.3,(Refer fig 4.9 of Part4)(Dimensions of FIG. 4.9 CHAIN WITH COUPLING)	-	850	NIL
2/2.3,(Refer fig 4.10 of Part4)(Dimensions of FIG. 4.10 T-BAR (For EDWP only))	-	850	NIL
2/2.3,(Refer fig 4.11 of Part4)(Dimensions of FIG; 4.11 COUNTER WEIGHT (For EDWP only))	-	850	NIL
2/2.3,(Refer fig 4.12A of Part4)(Dimensions of Fig 4.1 2A Telescopic Stand — Standard (For borewell with 150 NB casing pipe)(For SDWP, VLOM-65 & VLOM-50))	-	850	NIL
2/2.3,(Refer fig 4.12B of Part4)(Dimensions of Fig 4.12B Normal Stand — Standard (For borewell with 1001125 NB casing pipe) (For SDWP, VLOM-65 & VLOM-50))	-	850	NIL
2/2.3,(Refer fig 4.13A of Part4)(Dimensions of Fig 4.1 3A Telescopic Stand — EDWP (For borewell with 150 NB casing pipe) FOR EDWP )	-	850	NIL
2/2.3,(Refer fig 4.13B of Part4)(Dimensions of Fig 4.1 3B Normal Stand — EDWP (For borewell with 100/125 NB casing pipe) FOR EDWP )	-	850	NIL
2/2.3,(Refer fig 4.14 A of Part4)(Dimensions of Fig 4.1 4A Stand Pipe — Standard (For SDWP, VLOM-65, VLOM-50))	-	850	NIL
2/2.3,(Refer fig 4.14 B of Part4)(Dimensions of Fig 4.14B Stand Pipe — EDWP (For EDWP))	-	850	NIL
2/2.3,(Refer fig 4.14 C of Part4)(Dimensions of Fig 4.14C Stand Flange)	-	850	NIL
2/2.3,(Refer fig 4.14 D of Part4)(Dimensions of Fig 4.14D Leg)	-	850	NIL
2/2.3,(Refer fig 4.14 E of Part4)(Dimensions of Fig 4.14E Gusset)	-	850	NIL
2/2.3,(Refer fig 4.14 F of Part4)(Dimensions of Fig 4.1 4F Reducer Coller)	-	850	NIL
2/2.3,(Refer fig 4.14 G of Part4)(Dimensions of Fig 4.14G Spike)	-	850	NIL
2/2.3,(Refer fig 4.15 of Part4)(Dimensions of FIG, 4.15 WATER TANK — 32 (For SDWP & EDWP))	-	850	NIL
2/2.3,(Refer fig 4.16 of Part4)(Dimensions of FIG. 4.16 WATERTANK— 50)	-	850	NIL
2/2.3,(Refer fig 4.17 of Part4)(Dimensions of FIG. 4.17 WATERTANK— 65)	-	850	NIL
2/2.3,(Refer fig 4.18A of Part4)(Dimensions of FIG. 4.1 8A Tank Pipe )	-	850	NIL
2/2.3,(Refer fig 4.18B of Part4)(Dimensions of FIG. 4.18B Tank Top Flange)	-	850	NIL
2/2.3,(Refer fig 4.18C of Part4)(Dimensions of FIG. 4.18C Spout)	-	850	NIL
2/2.3,(Refer fig 4.18D of Part4)(Dimensions of FIG 4.1 8D Gusset)	-	500	NIL
2/2.3,(Refer fig 4.18E of Part4)(Dimensions of FIG 4.18E Tank Bottom Flanae — 32 (For SWDP & EDW~))	-	850	NIL
2/2.3,(Refer fig 4.18F of Part4)(Dimensions of FIG 4.1 8F Riser Pipe Holder — 32 (For SWDP & EDWP))	-	850	NIL
2/2.3,(Refer fig 4.18G of Part4)(Dimensions of FIG 4. 18G Riser Pipe Holder — 50)	-	850	NIL
2/2.3,(Refer fig 4.18H of Part4)(Dimensions of FIG 4.1 8H Tank Bottom Flange — 50)	-	850	NIL
2/2.3,(Refer fig 4.18I of Part4)(Dimensions of FIG 4.18I Tank Bottom Flange — 65 )	-	850	NIL
2/2.3,(Refer fig 4.18J of Part4)(Dimensions of FIG 4.18J Riser Pipe Holder — 65 )	-	850	NIL
2/2.3,(Refer fig 4.19 of Part4)(Dimensions of FIGFIG. 4.19 CONE PLATE)	-	850	NIL
2/2.3,(Refer fig 4.20 A of Part4)(Dimensions of FIG 4.20A Cone Flange)	-	850	NIL
2/2.3,(Refer fig 4.20 B of Part4)(Dimensions of FIG 4.20B Steel Cone)	-	850	NIL
2/2.3,(Refer fig 4.21 of Part4)(Dimensions of FIG. 4.21 CONNECTING ROD)	-	850	NIL
2/2.3,(Refer fig 4.22of Part4)(Dimensions of FIG. 4.22 PLUNGER ROD — STANDARD (For SDWP))	-	850	NIL
2/2.3,(Refer fig 4.23of Part4)(Dimensions of FIG.4.23 PLUNGERROD — LONG (For EDWP, VLOM-65 & VLOM-50 ))	-	850	NIL
2/2.3,(Refer fig 4.24of Part4)(Dimensions of FIG. 4.24 HANDLEAXE )	-	850	NIL
2/2.3,(Refer fig 4.25 of Part4)(Dimensions of FIG. 4.25 PUSHROD )	-	850	NIL
2/2.3,(Refer fig 4.26 of Part4)(Dimensions of FIG. 4.26 BEARINGSPACER)	-	850	NIL
2/2.3,(Refer fig 4.27 of Part4)(Dimensions of FIG.4.27 WASHER)	-	850	NIL
2/2.3,(Refer fig 4.28 of Part4)(Dimensions of FIG. 4.28 SOCKET— 32 (For SDWP & EDWP))	-	850	NIL
2/2.3,(Refer fig 4.29 of Part4)(Dimensions of FIG. 4.29 SOCKET— 50 (For VLOM-50))	-	850	NIL
2/2.3,(Refer fig 4.30 of Part4)(Dimensions ofFIG. 4.30 SOCKET— 65 (For VLOM-65))	-	850	NIL
2/2.3,(Refer fig 5.1 of Part 5)(Dimensions of FIG. 5.1 CYLINDER BODY— STANDARD (For SDWP))	-	850	NIL
2/2.3,(Refer fig 5.2 of Part 5)(Dimensions of FIG. 5.2 CYLINDERBODY— LONG (For EDWP & VLOM-65))	-	850	NIL
2/2.3,(Refer fig 5.3 of Part 5)(Dimensions of FIG. 5.3 CYLINDERBODY— VLOM-50)	-	850	NIL
2/2.3,(Refer fig 5.4 of Part 5)(Dimensions of FIG. 5.4 REDUCERCAP (For SDWP & EDWP) )	-	850	NIL
2/2.3,(Refer fig 5.5A of Part 5)(Dimensions of FIG. 5.5 A CYLINDERCAPS— VLOM-65 (For SDWP & EDWP))	-	850	NIL
2/2.3,(Refer fig 5.5B of Part 5)(Dimensions of FIG. 5.5 BCYLINDERCAPS— V LOM-65 (For SDWP & EDWP))	-	850	NIL
2/2.3,(Refer fig 5.6 of Part 5)(Dimensions ofFIG. 5.6 CYLINDERCAPS— VLOM-50)	-	850	NIL
2/2.3,(Refer fig 6.1 of Part 6)(Dimensions of FIG. 6.1 A BRASS LINER)	-	850	NIL
2/2.3,(Refer fig 6.2 of Part 6)(Dimensions of FIG. 6.2 PLUNGERYOKE BODY (For SDWP, EDWP & VLOM-65))	-	850	NIL
2/2.3,(Refer fig 6.3 of Part 6)(Dimensions of FIG. 6.3 UPPERVALVE (For SDWP, EDWP & VLOM-65))	-	850	NIL
2/2.3,(Refer fig 6.4 of Part 6)(Dimensions of FIG. 6.4 BUCKETSPACER— STANDARII (For SDWP, EDWP & VLOM-65))	-	850	NIL
2/2.3,(Refer fig 6.5 of Part 6)(Dimensions of FIG.6.5 BUCKET SPACER — LOWER (For EDWP))	-	600	NIL
2/2.3,(Refer fig 6.6 of Part 6)(Dimensions of FIG. 6.6 FOLLOWER — SDWP )	-	600	NIL
2/2.3,(Refer fig 6.7 of Part 6)(Dimensions of FIG. 6.7 FOLLOWER— EDWP)	-	600	NIL
2/2.3,(Refer fig 6.9 of Part 6)(Dimensions of FIG. 6.9 CHECK VALVE— STANDARD (For SDWP & EDWP) )	-	600	NIL
2/2.3,(Refer fig 6.10 of Part 6)(Dimensions of FIG. 6.10 CHECKVALVE— VLOM-65)	-	600	NIL
2/2.3,(Refer fig 6.11 of Part 6)(Dimensions of FIG. 6.11 RUBBERSEATRETAINER (For SDWP & EDWP))	-	600	NIL
2/2.3,(Refer fig 6.12 of Part 6)(Dimensions of FIG. 6.12 CHECK VALVE SEAT— STAN~AR~ (For SDWP & EDWP))	-	600	NIL
2/2.3,(Refer fig 6.13 of Part 6)(Dimensions of FIG. 6.13 CHECK VALVE — VLOM-65)	-	600	NIL
2/2.3,(Refer fig 6.14 of Part 6)(Dimensions of FIG. 6.14 CAGE (For VLOM-65))	-	600	NIL
2/2.3,(Refer fig 6.15 of Part 6)(Dimensions of FIG. 6.15 PLUNGERVALVE BODY— VLOM-50)	-	600	NIL
2/2.3,(Refer fig 6.16 of Part 6)(Dimensions of FIG. 6.16 CHECKVALVE BODY— VLOM-50)	-	600	NIL
2/2.3,(Refer fig 7.1 of Part 7)(Dimensions of FIG. 7.1 PUMPBUCKET— STANDARD (For SDWP, EDWP & VLOM-65) )	-	600	NIL
2/2.3,(Refer fig 7.2 of Part 7)(Dimensions of FIG. 7.2 PUMP BUCKET — VLOM-50)	-	600	NIL
2/2.3,(Refer fig 7.3 of Part 7)(Dimensions of FIG. 7.3 SEALINGRING— STANDARD (For SDWP & EDWP))	-	600	NIL
2/2.3,(Refer fig 7.4 of Part 7)(Dimensions of FIG. 7.4 SEALING RING— VLOM-65)	-	600	NIL
2/2.3,(Refer fig 7.5 of Part 7)(Dimensions of FIG. 7.5 SEALINGRING— VLOM-50)	-	600	NIL
2/2.3,(Refer fig 7.6 of Part 7)(Dimensions of FIG. 7.6 UPPERVALVE SEATING (For SDWP, EDWP & VLOM-65))	-	600	NIL
2/2.3,(Refer fig 7.7 of Part 7)(Dimensions of FIG. 7.7 LOWERVALVE SEATING— STANDARD (For SDWP & EDWP) )	-	600	NIL
2/2.3,(Refer fig 7.8 of Part 7)(Dimensions of FIG. 7.8 LOWERVALVE SEATING— VLOM-65 68)	-	600	NIL
2/2.3,(Refer fig 7.9 of Part 7)(Dimensions ofFIG. 7.9 BOBBIN (For VLOM-50))	-	600	NIL
2/2.3,(Refer fig 7.10 of Part 7)(Dimensions of FIG. 7.10 O-RING— VLOM-65)	-	600	NIL
2/2.3,(Refer fig 7.11 of Part 7)(Dimensions of FIG. 7.11 O-RING—VLOM-50)	-	600	NIL
2/2.3,(Refer fig 7.12 of Part 7)(Dimensions of FIG. 7.12 RUBBER CONE— VLOM-65 )	-	600	NIL
2/2.3,(Refer fig 7.13 of Part 7)(Dimensions of FIG. 7.13 RUBBERCONE— VLOM-50)	-	600	NIL
2/2.3,(Refer fig 7.14 of Part 7)(Dimensions of FIG. 7.14 PIPE CENTRALIZER— VLOM-65 )	-	600	NIL
2/2.3,(Refer fig 7.15 of Part 7)(Dimensions of FIG.7.15 PIPECENTRALIZER— VLOM-50 )	-	600	NIL
3/3.3.1,(Refer Cl 9.4.1 and 9.4.3 15500(Part 1 )(Head and Cylinder Assemblies)	-	600	NIL
6.2 of Part 1 ,Refer IS 4759(Galvanizing)	-	600	NIL
6.2.1 of Part 1,Refer Cl 5.9 of IS 2629(Galvanizing)	-	600	NIL
9.2 of Part1, (Visual Tests)	-	600	NIL
2/2.3 ,Refer Fig 3.1(Dimensions of FIG.4.1 HEAD— STANDARD(For SDWP, VLOM-65 and VLOM-50))	-	600	NIL
2/2.3 ,Refer Fig 3.1(Dimensions of FIG. 4.4 FRONT COVER)	-	600	NIL
2/2.3 ,Refer Fig 3.1(Dimensions of FIG. 4.24 HANDLE AXE )	-	600	NIL
2/2.3 ,Refer Fig 3.1(Dimensions of FIG.4.27 WASHER)	-	600	NIL
2/2.3 ,Refer Fig 3.1 and Refer annex B( HexagonaI Nut — )	-	600	NIL
2/2.3 ,Refer Fig 3.3 and annex B(Hexagonal Bolt)	-	600	NIL
2/2.3 ,Refer Fig 3.1 and 3.2(Dimensions of FIG.4.6 HANDLE— STANDARD (For SDWP, VLOM-65 & VLOM-50))	-	600	NIL
2/2.3 ,Refer Fig 3.1 and 3.2(Dimensions of FIG. 4.9 CHAIN WITH COUPLING)	-	600	NIL
2/2.3 ,Refer Fig 3.1 and 3.2(Dimensions of FIG. 4.26 BEARING SPACER)	-	600	NIL
2/2.3 ,Refer Fig 3.1 and 3.2,Annex B(Prevailing Torque Type Hex. Nut)	-	600	NIL
2/2.3 ,Refer Fig 3.3 and 3.4(Hex. Bolt —)	-	500	NIL
2/2.3 ,Refer Fig 3.3 and 3.4(Ball bearing, single side shielded)	-	500	NIL
2/2.3 ,Refer Fig 3.5(Dimensions of FIG. 4.22 PLUNGER ROD — STANDARD (For SDWP))	-	500	NIL
2/2.3 ,Refer Fig 3.5(Dimensions of FIG. 5.1 CYLINDER BODY— STANDARD (For SDWP))	-	500	NIL
2/2.3 ,Refer Fig 3.5(Dimensions of FIG. 5.4 REDUCERCAP (For SDWP & EDWP) )	-	500	NIL
2/2.3 ,Refer Fig 3.5(Dimensions of FIG. 6.1 BRASS LINER)	-	500	NIL
2/2.3 ,Refer Fig 3.5(Dimensions of FIG. 7.3 SEALINGRING— STANDARD (For SDWP & EDWP))	-	500	NIL
2/2.3 ,Refer Fig 3.5 and 3.6(Dimensions of FIG. 6.2 PLUNGERYOKE BODY (For SDWP, EDWP & VLOM-65))	-	500	NIL
2/2.3 ,Refer Fig 3.5 and 3.6(Dimensions of FIG. 6.3 UPPERVALVE (For SDWP, EDWP & VLOM-65))	-	500	NIL
2/2.3 ,Refer Fig 3.5 and 3.6(Dimensions of FIG. 6.4 BUCKETSPACER— STANDARII (For SDWP, EDWP & VLOM-65))	-	500	NIL
2/2.3 ,Refer Fig 3.5 and 3.6(Dimensions of FIG. 6.6 FOLLOWER — SDWP )	-	500	NIL
2/2.3 ,Refer Fig 3.5 and 3.6(Dimensions of FIG. 6.9 CHECK VALVE— STANDARD (For SDWP & EDWP) )	-	500	NIL
2/2.3 ,Refer Fig 3.5 and 3.6(Dimensions of FIG. 6.11 RUBBERSEATRETAINER (For SDWP & EDWP))	-	500	NIL
2/2.3 ,Refer Fig 3.5 and 3.6(Dimensions of FIG. 6.12 CHECK VALVE SEAT— STAN~AR~ (For SDWP & EDWP))	-	500	NIL
2/2.3 ,Refer Fig 3.5 and 3.6(Dimensions of FIG. 7.1 PUMPBUCKET— STANDARD (For SDWP, EDWP & VLOM-65) )	-	500	NIL
2/2.3 ,Refer Fig 3.5 and 3.6(Dimensions of FIG. 7.6 UPPERVALVE SEATING (For SDWP, EDWP & VLOM-65))	-	500	NIL
2/2.3 ,Refer Fig 3.5 and 3.6(Dimensions of FIG. 7.7 LOWERVALVE SEATING— STANDARD (For SDWP & EDWP) )	-	500	NIL
2/2.3 ,Refer Fig 3.7(Dimensions of FIG.4.23 PLUNGERROD — LONG (For EDWP, VLOM-65 & VLOM-50 ))	-	500	NIL
2/2.3 ,Refer Fig 3.7(Dimensions of FIG. 5.2 CYLINDERBODY— LONG (For EDWP & VLOM-65))	-	500	NIL
2/2.3 ,Refer Fig 3.7(Dimensions of FIG. 5.5 A Upper CAPS— VLOM-65 (For SDWP & EDWP))	-	500	NIL
2/2.3 ,Refer Fig 3.7(Dimensions of FIG. 5.5 B Bottomr CAPS— VLOM-65 (For SDWP & EDWP))	-	500	NIL
2/2.3 ,Refer Fig 3.7(Dimensions of FIG. 6.1 B BRASS LINER)	-	500	NIL
2/2.3 ,Refer Fig 3.7(Dimensions of FIG. 7.4 SEALING RING— VLOM-65)	-	500	NIL
2/2.3 ,Refer Fig 3.7 and 3.8(Dimensions of FIG. 6.2 PLUNGERYOKE BODY (For SDWP, EDWP & VLOM-65))	-	500	NIL
2/2.3 ,Refer Fig 3.9 and 3.10(Dimensions of FIG. 6.16 CHECKVALVE BODY— VLOM-50)	-	500	NIL
2/2.3 ,Refer Fig 3.9 and 3.10(Dimensions of FIG. 7.2 PUMP BUCKET — VLOM-50)	-	500	NIL
2/2.3 ,Refer Fig 3.7 and 3.8(Dimensions of FIG. 7.6 UPPERVALVE SEATING (For SDWP, EDWP & VLOM-65))	-	500	NIL
2/2.3 ,Refer Fig 3.7 and 3.8(Dimensions of FIG. 7.10 O-RING— VLOM-65)	-	500	NIL
2/2.3 ,Refer Fig 3.7 and 3.8(Check Nut)	-	500	NIL
2/2.3 ,Refer Fig 3.9(Dimensions of FIG.4.23 PLUNGERROD — LONG (For EDWP, VLOM-65 & VLOM-50 ))	-	500	NIL

Complete

IS 513 : Part 2 (2016)

Cold reduced carbon steel sheet and strip: Part 2 high tensile and multi - Phase steel (Sixth Revision)

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(CARBON)	-	500	-
6.0(MANGANESE)	-	500	-
6.0(SULPHUR)	-	500	-
6.0(PHOSPHORUS)	-	500	-
6.0(SILICON)	-	250	-
6.0(ALUMINIUM)	-	250	-
6.0(MICRO ALLOYS)	-	500	-
6.0(NITROGEN)	-	1500	-
Cl 7(UTM)	-	1500	-
Cl 8.5(Workmanship)	-	500	-
Cl 8.6(Workmanship)	-	500	-
Cl 9(Workmanship)	-	500	-
Cl 10(Length, Width & Thickness)	-	1000	-

Complete

IS 432 : Part 1 (1982)

Mild Steel and Medium Tensile Steel Bars and Hard-Drawn Steel Wire for Concrete Reinforcement: Part 1 Mild Steel and Medium Tensile Steel Bars

Grade I, II/5-50/1mtr*3nos

3150 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause -4, 4.1( CARBON)	-	100	nil
Clause -4, 4.1(SULPHUR)	-	100	nil
Clause -4, 4.1(PHOSPHURS)	-	100	nil
Clause -4, 4.1(NITROGEN)	-	500	nil
Clause -4, 4.1( ALUMINIUM)	-	100	nil
Clause -4, 4.1(SILICON)	-	100	nil
Clause -4, 4.1(Nickel)	-	100	nil
Clause -4, 4.1(Chromium)	-	100	nil
Clause -4, 4.1(Molybdenum)	-	100	nil
Clause -4, 4.1(NIOBIUM)	-	150	nil
Clause -4, 4.2(VANADIUM)	-	100	nil
Clause -4, 4.3(TITANIUM)	-	100	nil
Cl 6.2(Diameter & Ovality)	-	150	nil
Cl 6.2(Weight)	-	150	nil
Cl 8(Physical Requirements)	-	500	nil
Cl 9.3(Press)	-	250	nil
Cl 5.1(Workmanship)	-	150	nil
Clause -4, 4.1(MANGANESE)	-	100	nil
Clause 4(Copper)	-	100	nil
Clause 4(Boron)	-	100	nil

Complete

IS 432 : Part 2 (1982)

Mild Steel and Medium Tensile Steel Bars and Hard-Drawn Steel Wire for Concrete Reinforcement: Part 2 Hard-Drawn Steel Wire

Hard drawn steel wire

3500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 3.1.1(Sulphur)	-	500	-
Clause 3.1.1(Phosphorus)	-	500	-
Cl 4.1(Workmanship)	-	500	-
Cl 5 & 6(Diameter)	-	500	-
Cl 7(UTM)	-	1000	-
Cl 8.3(Bending To Both Side At 90°, Then Straight)	-	500	-

Complete

IS 12330 (1988)

Specificatioon for sulphate resisting Portland cement

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Fineness 4031 Part 2)	-	800	-
5.2.1(Expansion by Le Chatelier- 4031 Part 3)	-	500	-
5.2.1(Expansion by Autoclave- 4031 Part 3)	-	1000	-
5.3 a)(Setting Time Initial- 4031 Part 5)	-	250	-
5.3 b)(Setting Time Final- 4031 Part 5)	-	250	-
5.5 i)(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	700	-
5.5 ii)(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	700	-
5.5 iii)(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	700	-
4.1 - Table - 1 i(Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-	500	-
4.1 - Table - 1 ii(Insoluble residue - Cl 4.10 of IS 4032:1985)	-	500	-
4.1 - Table - 1 iii(Magnesia - Cl 4.8 of IS 4032:1985)	-	500	-
4.1 - Table - 1 iv(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-	500	-
4.1 - Table - 1 v(Tricalcium aluminate (C3A) - Cl 4 of IS 4032:1985)	-	500	-
4.1 - Table - 1 vi(Tetracalcium alumino ferrite phase plus twice the tricalcium aluminate ( C4AF + 2C3A ) - Cl 4 of IS 4032:1985)	-	500	-
4.1 - Table - 1 vii(Total loss on ignition - Cl 4.2 of IS 4032:1985)	-	500	-

Complete

IS 5872 (1990)

Cold rolled steel strips (Box Strappings) - Specification

COLD ROLLED STEEL STRIPS (BOX STRAPPINGS)

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 6(UTM)	-	1000	-
Cl 7(Bending To Both Side At 90°, Then Straight)	-	1000	-
Cl 9(Workmanship)	-	500	-
Cl 10(Width & Thickness)	-	1000	-
Cl 11(Workmanship)	-	500	-
Cl 12(Coating)	-	1000	-

Complete

IS 8041 (1990)

Rapid hardening portland cement - Specific4tion (Second Revision)

10500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Fineness 4031 Part 2)	-	800	-
6.2.1(Expansion by Le Chatelier- 4031 Part 3)	-	500	-
6.2.1(Expansion by Autoclave- 4031 Part 3)	-	1000	-
6.3 a)(Setting Time Initial- 4031 Part 5)	-	250	-
6.3 b)(Setting Time Final- 4031 Part 5)	-	250	-
6.4 a)(Compressive Strength At 24 hrs ± 30 minutes - IS 4031 Part 6)	-	700	-
6.4 b)(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	700	-
6.5(Transverse Strength - IS 4031 Part 8 (Optional))	-	2000	-

Complete

IS 1875 (1992)

Carbon steel billets, blooms, slabs and bars for forgings - Specification (Fifth Revision)

1/1A/2/2A/3/3A/4/5/6

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1, 6.2(carbon)	-	250	-
6.1, 6.2(sulphur)	-	250	-
6.1, 6.2(manganese)	-	250	-
6.1, 6.2(silicon )	-	250	-
6.1, 6.2(aluminium)	-	250	-
6.1, 6.2(nickel)	-	250	-
6.1, 6.2(cromium)	-	250	-
6.1, 6.2(copper)	-	250	-
6.1, 6.2(molybdenum)	-	250	-
6.1, 6.2(vanadium)	-	250	-
6.1, 6.2(boron)	-	250	-
6.1, 6.2(tin)	-	250	-
Cl 7(Workmanship)	-	500	-
Cl 8(Diameter, Ovality & Weight)	-	500	-
Cl 9(UTM & HBW)	-	500	-
Cl 12(Supplementary Requirements)	-	500	-
6.1, 6.2(phosphorus)	-	500	-

Complete

IS 7283 (1992)

Hot - Rolled bars for the production of bright bars and machined parts for engineering applications specification (First Revision)

HOT ROLLED BARS FOR THE PRODUCTION OF BRIGHT BARS

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 6(Workmanship)	-	500	-
Cl 7(Diameter & Out Of Round)	-	1000	-
Cl 8(Decarburization)	-	2500	-
Cl 9(Inclusion)	-	2000	-
Cl 10(Hardenability)	-	3000	-
Cl 11(Size)	-	1000	-
5, 5.1, 5.2(Chemical Composition - Carbon)	-	500	-
5, 5.1, 5.2(Chemical Composition - Sulphur)	-	500	-
5, 5.1, 5.2(Chemical Composition - Phosphorus)	-	500	-
5, 5.1, 5.2(Chemical Composition - Manganese)	-	500	-
5, 5.1, 5.2(Chemical Composition - Silicon)	-	500	-
5, 5.1, 5.2(Chemical Composition - Nickel)	-	500	-
5, 5.1, 5.2(Copper)	-	500	-
5, 5.1, 5.2(Chromium)	-	500	-
5, 5.1, 5.2(Chemical Composition - Lead)	-	500	-
5, 5.1, 5.2(Chemical Composition - Nitrogen)	-	1500	-

Complete

IS 7887 (1992)

Mild steel wire rod for general engineering purposes - Specification (First Revision)

1/2/3/4/4M/5/6/6M/7/8/8M

3500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Carbon %)	-	350	-
6.1(Sulphur %)	-	350	-
6.1(Phosphorus %)	-	250	-
6.1(Manganese %)	-	350	-
6.1( Aluminium %)	-	350	-
6.1(Silicon %)	-	350	-
Cl 8(Workmanship)	-	500	-
Cl 9(Nominal Diameter & Out Of Shape)	-	1000	-

Complete

IS 2879 (1998)

Mild steel for metal arc welding electrodes - Specification (Third Revision)

MILD STEEL FOR METAL ARC WELDING ELECTRODES

3500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Carbon %)	-	250	-
6(Sulphur %)	-	250	-
6(Phosphorus %)	-	250	-
6(Manganese %)	-	250	-
6(Silicon %)	-	250	-
6( Copper %)	-	250	-
6( Aluminium %)	-	250	-
6( Ti)	-	500	-
6(V)	-	250	-
6(Cr+ Mo+ Ni)	-	0	-
6(Mo)	-	250	-
6(Ni)	-	250	-
Cl 7(Workmanship)	-	250	-
Cl 8 & 9(Diameter)	-	250	-

Complete

IS 10748 (2004)

Hot - Rolled steel strip for welded tubes and pipes - Specification (Second Revision)

1/2/3/4/6

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table 1 ( Clauses 7.1 ,7.2 )( CARBON)	-	200	-
Table 1 ( Clauses 7.1 ,7.2 )(SULPHUR)	-	200	-
Table 1 ( Clauses 7.1 ,7.2 )(PHOSPHURS)	-	200	-
Table 1 ( Clauses 7.1 ,7.2 )(MANGANESE)	-	300	-
Table 1 ( Clauses 7.1 ,7.2 )(NITROGEN)	-	1000	-
Table 1 ( Clauses 7.1 ,7.2 )(SILICON)	-	300	-
Table 1 ( Clauses 7.1 ,7.2 )( ALUMINIUM)	-	300	-
Table 1 ( Clauses 7.1 ,7.2 )(Nickel)	-	300	-
Table 1 ( Clauses 7.1 ,7.2 )(Chromium)	-	200	-
Table 1 ( Clauses 7.1 ,7.2 )(Molybdenum)	-	200	-
Table 1 ( Clauses 7.1 ,7.2 )(NIOBIUM)	-	300	-
Table 1 ( Clauses 7.1 ,7.2 )(VANADIUM)	-	200	-
Table 1 ( Clauses 7.1 ,7.2 )(TITANIUM)	-	200	-
Table 1 ( Clauses 7.1 ,7.2 )(CARBON EQUIVELENT )	-	0	-
Cl 8 & Table 3(UTM)	-	500	-
Cl 9(Press)	-	500	-
Cl 11(Workmanship)	-	100	-

Complete

IS 3601 (2006)

Steel tubes for mechanical and general engineering purposes - Specification (Second Revision)

STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEE~G PURPOS

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Material)	-	300	-
4.1(Sulphur-Percentage by mass)	-	250	-
4.1(Phosphorus-Percentage by mass)	-	250	-
6.0(Workmanship)	-	500	-
8.0(Straightness)	-	500	-
11.1(Surface Protection)	-	1000	-
11.2(Surface Protection)	-	1000	-
13.1.3(Tensile Strength)	-	250	-
13.1.1(Yield Stress)	-	250	-
13.1.2(Elongation)	-	250	-
13.2(Flattening Test)	-	1000	-
13.3(Bend Test (Strip))	-	250	-
13.4(Bend Test (Whole Tube))	-	500	-
13.5(Drift Expansion Test)	-	500	-
13.6(Crush Test)	-	100	-
19.1.3(Height of Internal Fin)	-	100	-

Complete

IS 15647 (2006)

Hot rolled steel narrow width strip for welded tubes and pipes

HOT ROLLED STEEL NARROW WIDTH STRIP

5000 View breakup
-

Clause No.	Exclusion	Remark
Cl 8(UTM)	-	-
Cl 9(Press)	-	-
Cl 11(Workmanship)	-	-
Cl 12(Length, Width & Thickness)	-	-
Cl 13(Workmanship)	-	-

Complete

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

HIGH STRENGTH DEFORMED STEEL BARS

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Carbon %)	-	500	-
4.1(Sulphur %)	-	500	-
4.1(Phosphorus %)	-	500	-
4.1(Silicon %)	-	0	-
4.1( Copper %)	-	0	-
4.1( Aluminium %)	-	0	-
4.1( Nb)	-	0	-
4.1(V)	-	0	-
4.1( Ti)	-	0	-
4.1(Cr)	-	0	-
4.1(Mo)	-	0	-
4.1( Nitrogen%)	-	1500	-
4.1(CE)	-	1000	-
Cl. 5 (Cl. 5 - Mean projected area of transverse ribs (1/3 of Ar))	-	1000	-
Cl. 5 (Cl.5 Mean area of ribs/unit length (Ar), )	-	1000	-
Cl. 6.1(Nominal Size)	-	500	-
Cl. 7.2 Table -2 (Nominal Mass)	-	500	-
Cl. 8.1 Table 3(TS/YS ratio)	-	500	-
Cl. 8.1 Table 3(Tensile Strength (TS))	-	1000	-
Cl. 8.1 Table 3(Yield Stress (YS))	-	1000	-
Cl. 8.1 Table 3(Elongation, percentage)	-	1000	-
Cl 9.3(Load In One Direction)	-	1500	-
Cl 9.4(Load In Other Direction From Bend)	-	1500	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR+PHOSPHUR)	-	500	-

Complete

IS 6240 (2008)

Hot rolled steel plate (Up To 6 Mm) sheet and strip for the manufacture of low pressure liquefiable gas cylinders (Fourth Revision)

8500 View breakup
-

Clause No.	Exclusion	Remark
6.1(Carbon %)	-	-
6.1(Sulphur %)	-	-
6.1(Phosphorus %)	-	-
6.1(Manganese %)	-	-
6.1(Silicon %)	-	-
6.1(Nitrogen%)	-	-
6.1( Aluminium %)	-	-
Cl 7(UTM)	-	-
Cl 8(Press)	-	-
Cl 10(Erichsen Cupping)	-	-
Cl 13(Length, Width & Thickness)	-	-

Complete

IS 3502 (2009)

Steel chequered plates (Third Revision)

Chequered Plates

6500 View breakup
-

Clause No.	Exclusion	Remark
Cl 5(Workmanship)	-	-
Cl 8(UTM)	-	-
Cl 10(Length, Width, Thickness & Chequered Height)	-	-

Complete

IS 2062 (2011)

Hot rolled medium and high tensile structural steel - Specification (Seventh Revision)

HOT ROLLED STEEL

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause - 5, 8.1 & 8.2(E250, CARBON)	-	250	Nil
Clause - 5, 8.1 & 8.2(E250, SULPHUR)	-	250	Nil
Clause - 5, 8.1 & 8.2(E250, PHOSPHURS)	-	250	Nil
Clause - 5, 8.1 & 8.2(E250 ,MANGANESE)	-	250	Nil
Clause - 5, 8.1 & 8.2(E250, NITROGEN)	-	1000	Nil
Clause - 5, 8.1 & 8.2(E250, SILICON)	-	250	Nil
Clause - 5, 8.1 & 8.2(E250, ALUMINIUM)	-	250	Nil
Clause - 5, 8.1 & 8.2(E250, CARBON +EQUIVELENT )	-	250	Nil
Cl 7(Workmanship)	-	500	Nil
Cl 10.3(UTM)	-	1000	Nil
Cl 11.3(Press)	-	500	Nil
Cl 12(Sudden Load Applied)	-	1150	Nil
Cl 13(Y Groove Cracking Test)	-	0	NA
Cl 18(Weight)	-	100	Nil
Clause - 5, 8.1 & 8.2(E275, CARBON)	-	250	Nil

Complete

IS 2830 (2012)

Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into steel for general structural purposes - Specification (Third Revision)

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Carbon %)	-	500	-
6.1(Sulphur %)	-	500	-
6.1(Phosphorus %)	-	500	-
6.1(Manganese %)	-	500	-
6.1( Aluminium %)	-	500	-
6.1(Silicon %)	-	500	-
6.1( Nitrogen%)	-	1500	-
Cl 9(Workmanship)	-	500	-
Cl 10.2(Press)	-	1000	-
Cl 11(Length, Width & Thickness)	-	1000	-

Complete

IS 2831 (2012)

Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into structural steel (Ordinary Quality) - Specification (Fourth Revision)

7000 View breakup
-

Clause No.	Exclusion	Remark
Cl. 6.1, Table 1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-
Cl. 6.1, Table 1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-
Cl. 6.1, Table 1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-
Cl. 6.1, Table 1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-
Cl. 6.1, Table 1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-
Cl. 6.1, Table 1(Aluminium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-
Cl. 6.1, Table 1(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-
Cl. 6.1, Table 1(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-
Cl. 6.1, Table 1(Niobium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-
Cl. 6.1, Table 1(Titanium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-
9( FREEDOM FROM DEFECTS)	-	-
10.1.a)( Macro examination IS 11371)	-	-
10.1.b)( Sulphur print tests IS 12037)	-	-
11 & 12(DIMENSIONS and Tolerances)	-	-

Complete

IS 269 (2015)

Ordinary portland cement - Specification (Sixth Revision)

33 Grade/43Grade/53Grade/43S Grade/53S Grade

10500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 Table-3 i.(Fineness)	-	800	-
7 Table-3 ii a(Expansion by Le Chatelier)	-	500	-
7 Table-3 ii b(Expansion by Autoclave)	-	1000	-
7 Table-3 iii a(Setting Time Initial)	-	250	-
7 Table-3 iii b(Setting Time Final)	-	250	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	700	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	700	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	700	-
7 Table-3 v(Transverse Strength - IS 4031 Part 8 (Optional))	-	2000	-
6.1 Table-2 i.(Ratio of percentage of lime to percentage of silica, alumina and iron oxide)	-	500	-
6 - Table - 1 ii(Ratio of percentage of alumina to that of iron oxide - Cl 4 of IS 4032:1985)	-	500	-
6 - Table - 1 iii(Insoluble residue - Cl 4.10 of IS 4032:1985)	-	500	-
6 - Table - 1 iv(Magnesia - Cl 4.8 of IS 4032:1985)	-	500	-
6 - Table - 1 v(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-	500	-
6 - Table - 1 vi(Loss on ignition - Cl 4.2 of IS 4032:1985)	-	500	-
6 - Table - 1 vii(Chloride content - Cl 4.13 of IS 4032:1985)	-	500	-
6 - Table - 1 viii( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	500	-

Complete

.Lab is recognized revised version of standard IS 269:2015.

IS 455 (2015)

Portland slag cement - Specification

10500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 7 Table-2(Cl. 7 Table-2 i (Fineness ))	-	800	-
Cl. 7 Table-2(Cl. 7 Table-2 ii a (Soundness , Le Chatelier Expansion ))	-	500	-
Cl. 7 Table-2(Cl. 7 Table-2 ii b (Soundness , Autoclave Expansion ))	-	1000	-
Cl. 7 Table-2(Cl. 7 Table-2 iii a (Setting time Initial))	-	250	-
Cl. 7 Table-2(Cl. 7 Table-2 iii b (Setting time Final))	-	250	-
Cl. 7 Table-2(Cl. 7 Table-2 iv a (Compressive Strength 72±1 hr IS))	-	700	-
Cl. 7 Table-2(Cl. 7 Table-2 iv b (Compressive Strength 168±2 hr ))	-	700	-
Cl. 7 Table-2(Cl. 7 Table-2 iv c (Compressive Strength 672±4 hr) )	-	700	-
Cl. 7 Table-2(Cl. 7 Table-2 v (Transverse Strength (Optional) )	-	2000	-
6 - Table - 1 i(Insoluble residue - Cl 6.9 of IS 4032:1985)	-	500	-
6 - Table - 1 ii(Magnesia - Cl 6.8 of IS 4032:1985)	-	500	-
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 6.11 of IS 4032:1985)	-	500	-
6 - Table - 1 iv(Sulphide sulphur (S) - Cl 6.12 of IS 4032:1985)	-	500	-
6 - Table - 1 v(Loss on ignition - Cl 6.2 of IS 4032:1985)	-	500	-
6 - Table - 1 vi(Chloride content - Cl 4.13 of IS 4032:1985)	-	500	-
6 - Table - 1 vii( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	500	-

Complete

IS 1489 (Part 1) (2015)

Portland pozzolana cement - Specification: Part 1 fly Ash Based

10950 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 -Table 2- i(Fineness 4031 Part 2)	-	750	nil
7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	500	nil
7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	1000	nil
7 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	500	nil
7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	500	nil
7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	500	nil
7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	600	nil
7 -Table 2- v(Transverse Strength - IS 4031 Part 8 (Optional))	-	0	nil
7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10)	-	1500	nil
7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	500	nil
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	700	nil
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	700	nil
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	800	nil
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	800	nil
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	800	nil
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	800	nil

Complete

Lab is recognized revised version of standard IS 1489(Pt-1):2015.

IS 1489 : Part 2 (2015)

Portland - Pozzolana cement - Specification: Part 2 calcined clay based

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 -Table 2- i(Fineness 4031 Part 2)	-	800	-
7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	500	-
7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	1000	-
7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	250	-
7 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	250	-
7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	700	-
7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	700	-
7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	700	-
7 -Table 2- v(Transverse Strength - IS 4031 Part 8 (Optional))	-	2000	-
7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10)	-	1500	-

Complete

Lab is recognized revised version of standard IS 1489(Pt-2):2015.

IS 8042 (2015)

White portland cement - Specification (Third Revision)

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6 -Table 2- i(Fineness 4031 Part 2)	-	800	-
6 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	500	-
6 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	1000	-
6 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	250	-
6 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	250	-
6 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	700	-
6 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	700	-
6 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	700	-
6 -Table 2- v(Transverse Strength - IS 4031 Part 8 (Optional))	-	2000	-
6 -Table 2- vi(Degree of whiteness-Annex B)	-	1500	-

Complete

IS 513 : Part 1 (2016)

Cold reduced carbon steel sheet and strip: Part 1 cold forming and drawing purpose (Sixth Revision)

8500 View breakup
-

Clause No.	Exclusion	Remark
7.0(CARBON)	-	-
7.0(SULPHUR)	-	-
7.0(PHOSPHORUS)	-	-
7.0(MANGANESE)	-	-
7.0(SILICON)	-	-
7.0(NITROGEN)	-	-
7.0(ALUMINIUM)	-	-
7.0(MICRO ALLOYS)	-	-
Cl 8(UTM)	-	-
Cl 9(Workmanship)	-	-
Cl 11(Length, Width & Thickness)	-	-

Complete

REVISED VERSION INCLUDED w.e.f. 4-1-19.

IS 1079 (2017)

Hot rolled carbon steel sheet, plate and strip - Specification (Seventh Revision)

8500 View breakup
-

Clause No.	Exclusion	Remark
6.1(Carbon %)	-	-
6.1(Sulphur %)	-	-
6.1(Phosphorus %)	-	-
6.1(Manganese %)	-	-
6.1(Silicon %)	-	-
6.1( Nitrogen%)	-	-
6.1(Microalloying)	-	-
Cl 8(UTM)	-	-
Cl 9(Press)	-	-
Cl 10(Die Press)	-	-
Cl 12(Workmanship)	-	-
Cl 13(Length, Width & Thickness)	-	-

Complete

IS 5986 (2017)

Hot rolled steel sheet, plate and strip for forming and flanging purposes - Specification (Fourth Revision)

HOT ROLLED STEEL FLAT PRODUCTS

7000 View breakup
-

Clause No.	Exclusion	Remark
7.1(Carbon %)	-	-
7.1(Sulphur %)	-	-
7.1(Phosphorus %)	-	-
7.1(Manganese %)	-	-
7.1(Silicon %)	-	-
7.1( Copper %)	-	-
7.1(CE)	-	-
7.1( Nitrogen%)	-	-
Cl 8(UTM)	-	-
Cl 9(Press)	-	-
Cl 10(Sudden Load Applied)	-	-
Cl 11(Expansion Test)	-	-
Cl 13(Workmanship)	-	-
Cl 14(Weldability)	-	-
Cl 15(Length, Width & Thickness)	-	-

Complete

IS 11513 (2017)

Hot rolled carbon steel strip for cold rolling purposes - Specification (Second Revision)

5000 View breakup
-

Clause No.	Exclusion	Remark
6.1(Carbon %)	-	-
6.1(Sulphur %)	-	-
6.1(Phosphorus %)	-	-
6.1(Manganese %)	-	-
6.1(Silicon %)	-	-
6.1( Nitrogen%)	-	-
6.1(Microalloying)	-	-
6.1(Boron)	-	-
6.1( Ti)	-	-
6.1(V)	-	-
Cl 8(Workmanship)	-	-
Cl 9(Length, Width, Thickness, Crown, Edge Camber & Difference in Thickness Across Width )	-	-

Complete

Bureau of Indian Standards

The National Standards Body of India

LUCID LABORATORIES PRIVATE LIMITED

PLOT NO.3, IDA,, BALANAGAR, HYDERABAD, Medchal Malkajgiri, Telangana, 500037

9848163346 info@lucidlabsindia.com

Scope List