BIS - LIMS (Laboratory Information Management System)

LUCID LABORATORIES PRIVATE LIMITED, HYDERABAD

PLOT NO.3, IDA,, BALANAGAR, HYDERABAD, Medchal Malkajgiri, Telangana, 500037

9848163346 info@lucidlabsindia.com

Scope List

Reset

74 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 2830 (2012)

Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into steel for general structural purposes - Specification (Third Revision)

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Carbon %)	-	500	-
6.1(Sulphur %)	-	500	-
6.1(Phosphorus %)	-	500	-
6.1(Manganese %)	-	500	-
6.1( Aluminium %)	-	500	-
6.1(Silicon %)	-	500	-
6.1( Nitrogen%)	-	1500	-
Cl 9(Workmanship)	-	500	-
Cl 10.2(Press)	-	1000	-
Cl 11(Length, Width & Thickness)	-	1000	-

19 Apr, 2028

-
-

IS 2831 (2012)

Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into structural steel (Ordinary Quality) - Specification (Fourth Revision)

7000 View breakup
-

Clause No.	Exclusion	Remark
Cl. 6.1, Table 1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-
Cl. 6.1, Table 1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-
Cl. 6.1, Table 1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-
Cl. 6.1, Table 1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-
Cl. 6.1, Table 1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-
Cl. 6.1, Table 1(Aluminium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-
Cl. 6.1, Table 1(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-
Cl. 6.1, Table 1(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-
Cl. 6.1, Table 1(Niobium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-
Cl. 6.1, Table 1(Titanium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-
9( FREEDOM FROM DEFECTS)	-	-
10.1.a)( Macro examination IS 11371)	-	-
10.1.b)( Sulphur print tests IS 12037)	-	-
11 & 12(DIMENSIONS and Tolerances)	-	-

19 Apr, 2028

-
-

IS 3812 (Part 1) (2013)

Pulverized fuel ash - Specification: Part 1 For use as pozzolana in cement, cement mortar and concrete

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1-Table 2(v)(PHYSICAL REQUIREMENTS-Soundness by autoclave test )	-	800	-
7.1-Table 2(iv)(PHYSICAL REQUIREMENTS-Compressive strength at 28 days)	-	1500	-
7.1-Table 2(iii)(PHYSICAL REQUIREMENTS-Average compressive strength)	-	1500	-
7.1-Table 2(ii)(PHYSICAL REQUIREMENTS-Particles retained on 45 micron IS sieve)	-	500	-
7.1-Table 2(i)(PHYSICAL REQUIREMENTS-Fineness)	-	600	-
Cl. 6.1, Table 1 - ii(Silicon dioxide (SiO2) - IS 1727)	-	1500	-
Cl. 6.1, Table 1 - i(Silicon dioxide (SiO2) plus aluminium oxide (Al2O3) plus ironoxide (Fe2O3) - IS 1727)	-	500	-
Cl. 6.1, Table 1 - iii(Reactive Silica - Annex B)	-	500	-
Cl. 6.1, Table 1 - iv(Magnesium oxide (MgO) - IS 1727)	-	500	-
Cl. 6.1, Table 1 - v( Total sulphur as sulphur trioxide (SO3) - IS 1727)	-	500	-
Cl. 6.1, Table 1 - vi( Available alkalis as equivalent sodium oxide (Na2O) - Annex C)	-	1000	-
Cl. 6.1, Table 1 - vii( Total Chlorides - IS 4032)	-	500	-
Cl. 6.1, Table 1 - viii( Loss on ignition - IS 1727)	-	500	-

19 Apr, 2028

-
-

IS 3812 : Part 2 (2013)

Pulverized Fuel Ash - Part 2 : For Use as Admixture in Cement Mortar and Concrete

6600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1, Table 1(Fineness — Specific surface in m2 /kg)	-	1000	-
7.1, Table 1(Particles retained on 45 micron IS sieve (wet sieving))	-	500	-
7.1, Table 1(Soundnes)	-	1500	-
5.1, 6.1, Table 1(Silicon dioxide (SiO2 ) plus aluminium oxide (Al2O3 ) plus iron oxide (Fe2O3 ))	-	500	-
5.1, 6.1, Table 1(Silicon dioxide (SiO2 ))	-	500	-
5.1, 6.1, Table 1(Magnesium oxide (MgO)	-	500	-
5.1, 6.1, Table 1(Total sulphur as sulphur trioxide (SO3)	-	500	-
5.1, 6.1, Table 1(Available alkalies as equivalent sodium oxide (Na2O))	-	500	-
5.1, 6.1, Table 1(Total chlorides)	-	500	-
5.1, 6.1, Table 1(Loss on ignition)	-	500	-
6.2(moisture content)	-	200	-

19 Apr, 2028

-
-

IS 269 (2015)

Ordinary portland cement - Specification (Sixth Revision)

33 Grade/43Grade/53Grade/43S Grade/53S Grade

10500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 Table-3 i.(Fineness)	-	800	-
7 Table-3 ii a(Expansion by Le Chatelier)	-	500	-
7 Table-3 ii b(Expansion by Autoclave)	-	1000	-
7 Table-3 iii a(Setting Time Initial)	-	250	-
7 Table-3 iii b(Setting Time Final)	-	250	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	700	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	700	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	700	-
7 Table-3 v(Transverse Strength - IS 4031 Part 8 (Optional))	-	2000	-
6.1 Table-2 i.(Ratio of percentage of lime to percentage of silica, alumina and iron oxide)	-	500	-
6 - Table - 1 ii(Ratio of percentage of alumina to that of iron oxide - Cl 4 of IS 4032:1985)	-	500	-
6 - Table - 1 iii(Insoluble residue - Cl 4.10 of IS 4032:1985)	-	500	-
6 - Table - 1 iv(Magnesia - Cl 4.8 of IS 4032:1985)	-	500	-
6 - Table - 1 v(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-	500	-
6 - Table - 1 vi(Loss on ignition - Cl 4.2 of IS 4032:1985)	-	500	-
6 - Table - 1 vii(Chloride content - Cl 4.13 of IS 4032:1985)	-	500	-
6 - Table - 1 viii( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	500	-

19 Apr, 2028

-
-

IS 455 (2015)

Portland slag cement - Specification

10500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 7 Table-2(Cl. 7 Table-2 i (Fineness ))	-	800	-
Cl. 7 Table-2(Cl. 7 Table-2 ii a (Soundness , Le Chatelier Expansion ))	-	500	-
Cl. 7 Table-2(Cl. 7 Table-2 ii b (Soundness , Autoclave Expansion ))	-	1000	-
Cl. 7 Table-2(Cl. 7 Table-2 iii a (Setting time Initial))	-	250	-
Cl. 7 Table-2(Cl. 7 Table-2 iii b (Setting time Final))	-	250	-
Cl. 7 Table-2(Cl. 7 Table-2 iv a (Compressive Strength 72±1 hr IS))	-	700	-
Cl. 7 Table-2(Cl. 7 Table-2 iv b (Compressive Strength 168±2 hr ))	-	700	-
Cl. 7 Table-2(Cl. 7 Table-2 iv c (Compressive Strength 672±4 hr) )	-	700	-
Cl. 7 Table-2(Cl. 7 Table-2 v (Transverse Strength (Optional) )	-	2000	-
6 - Table - 1 i(Insoluble residue - Cl 6.9 of IS 4032:1985)	-	500	-
6 - Table - 1 ii(Magnesia - Cl 6.8 of IS 4032:1985)	-	500	-
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 6.11 of IS 4032:1985)	-	500	-
6 - Table - 1 iv(Sulphide sulphur (S) - Cl 6.12 of IS 4032:1985)	-	500	-
6 - Table - 1 v(Loss on ignition - Cl 6.2 of IS 4032:1985)	-	500	-
6 - Table - 1 vi(Chloride content - Cl 4.13 of IS 4032:1985)	-	500	-
6 - Table - 1 vii( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	500	-

19 Apr, 2028

-
-

IS 1489 (Part 1) (2015)

Portland pozzolana cement - Specification: Part 1 fly Ash Based

10950 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 -Table 2- i(Fineness 4031 Part 2)	-	750	nil
7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	500	nil
7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	1000	nil
7 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	500	nil
7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	500	nil
7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	500	nil
7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	600	nil
7 -Table 2- v(Transverse Strength - IS 4031 Part 8 (Optional))	-	0	nil
7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10)	-	1500	nil
7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	500	nil
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	700	nil
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	700	nil
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	800	nil
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	800	nil
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	800	nil
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	800	nil

19 Apr, 2028

-
-

IS 1489 : Part 2 (2015)

Portland - Pozzolana cement - Specification: Part 2 calcined clay based

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 -Table 2- i(Fineness 4031 Part 2)	-	800	-
7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	500	-
7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	1000	-
7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	250	-
7 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	250	-
7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	700	-
7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	700	-
7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	700	-
7 -Table 2- v(Transverse Strength - IS 4031 Part 8 (Optional))	-	2000	-
7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10)	-	1500	-

19 Apr, 2028

-
-

IS 8042 (2015)

White portland cement - Specification (Third Revision)

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6 -Table 2- i(Fineness 4031 Part 2)	-	800	-
6 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	500	-
6 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	1000	-
6 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	250	-
6 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	250	-
6 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	700	-
6 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	700	-
6 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	700	-
6 -Table 2- v(Transverse Strength - IS 4031 Part 8 (Optional))	-	2000	-
6 -Table 2- vi(Degree of whiteness-Annex B)	-	1500	-

19 Apr, 2028

-
-

IS 513 : Part 1 (2016)

Cold reduced carbon steel sheet and strip: Part 1 cold forming and drawing purpose (Sixth Revision)

8500 View breakup
-

Clause No.	Exclusion	Remark
7.0(CARBON)	-	-
7.0(SULPHUR)	-	-
7.0(PHOSPHORUS)	-	-
7.0(MANGANESE)	-	-
7.0(SILICON)	-	-
7.0(NITROGEN)	-	-
7.0(ALUMINIUM)	-	-
7.0(MICRO ALLOYS)	-	-
Cl 8(UTM)	-	-
Cl 9(Workmanship)	-	-
Cl 11(Length, Width & Thickness)	-	-

19 Apr, 2028

-
-

IS 1079 (2017)

Hot rolled carbon steel sheet, plate and strip - Specification (Seventh Revision)

8500 View breakup
-

Clause No.	Exclusion	Remark
6.1(Carbon %)	-	-
6.1(Sulphur %)	-	-
6.1(Phosphorus %)	-	-
6.1(Manganese %)	-	-
6.1(Silicon %)	-	-
6.1( Nitrogen%)	-	-
6.1(Microalloying)	-	-
Cl 8(UTM)	-	-
Cl 9(Press)	-	-
Cl 10(Die Press)	-	-
Cl 12(Workmanship)	-	-
Cl 13(Length, Width & Thickness)	-	-

19 Apr, 2028

-
-

IS 4923 (2017)

Hollow steel sections for structural use - Specification (Third Revision)

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.7.1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	-
Cl.7.1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	-
Cl.7.1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	-
Cl.7.1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	-
Cl.7.1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	-
Cl.7.1(Aluminium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	-
Cl.7.1(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	-
Cl.7.1(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	-
Cl.7.1(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Depth))	-	500	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Width))	-	500	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Thickness))	-	500	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Weigth))	-	500	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Area of Section))	-	500	-
Cl. 10.1, 14.1, 18.1(Straightness)	-	500	-
Cl. 15.2, Table 3(Tensile Strength- IS 1608)	-	500	-
Cl. 15.2, Table 3(Yield Strength- IS 1608)	-	500	-
Cl. 15.2, Table 3(Elongation- IS 1608)	-	500	-
Cl. 14.1(Exact Length)	-	250	-
Cl. 14.1(Weight on individual length)	-	250	-

19 Apr, 2028

-
-

IS 5986 (2017)

Hot rolled steel sheet, plate and strip for forming and flanging purposes - Specification (Fourth Revision)

HOT ROLLED STEEL FLAT PRODUCTS

7000 View breakup
-

Clause No.	Exclusion	Remark
7.1(Carbon %)	-	-
7.1(Sulphur %)	-	-
7.1(Phosphorus %)	-	-
7.1(Manganese %)	-	-
7.1(Silicon %)	-	-
7.1( Copper %)	-	-
7.1(CE)	-	-
7.1( Nitrogen%)	-	-
Cl 8(UTM)	-	-
Cl 9(Press)	-	-
Cl 10(Sudden Load Applied)	-	-
Cl 11(Expansion Test)	-	-
Cl 13(Workmanship)	-	-
Cl 14(Weldability)	-	-
Cl 15(Length, Width & Thickness)	-	-

19 Apr, 2028

-
-

IS 11513 (2017)

Hot rolled carbon steel strip for cold rolling purposes - Specification (Second Revision)

5000 View breakup
-

Clause No.	Exclusion	Remark
6.1(Carbon %)	-	-
6.1(Sulphur %)	-	-
6.1(Phosphorus %)	-	-
6.1(Manganese %)	-	-
6.1(Silicon %)	-	-
6.1( Nitrogen%)	-	-
6.1(Microalloying)	-	-
6.1(Boron)	-	-
6.1( Ti)	-	-
6.1(V)	-	-
Cl 8(Workmanship)	-	-
Cl 9(Length, Width, Thickness, Crown, Edge Camber & Difference in Thickness Across Width )	-	-

19 Apr, 2028

-
-

IS 277 (2018)

Galvanized steel strips and sheets (Plain And Corrugated) - Specification (Seventh Revision)

3500 View breakup
-

Clause No.	Exclusion	Remark
5.1(carbon)	-	-
5.1(sulphur)	-	-
5.1(phosphorus)	-	-
5.1(manganese)	-	-
5.1(aluminium)	-	-
5.1(silicon )	-	-
5.1(nitrogen)	-	-
Cl 8.1(UTM)	-	-
Cl 8.2(Press)	-	-
Cl 10(Galvanising Test)	-	-
Cl 12(Workmanship)	-	-
Cl 13(Weight)	-	-
Cl 14(Length, Width & Thickness)	-	-

19 Apr, 2028

-
-

IS 15609 (2005)

Polyethylene flexible pouches for the packing of natural mineral water and packaged drinking water - Specification

Polyethylene Fexible pouches

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Material)	-	100	-
6.1.1(Description)	-	100	-
6.1.2(Film Form)	-	100	-
6.1.3(Winding of the Film )	-	100	-
6.1.4(Odour)	-	100	-
6.1.5 A-2 of IS: 2508:2016(Thickness)	-	100	-
6.1.6(Width)	-	100	-
6.1.7 IS: 9845:1998(Migration- a. Amount of extractive )	-	200	-
6.1.7 IS: 9845:1998(Migration- b. Colour migration)	-	200	-
6.1.8 Annex 4 of IS:2508:2016(Tensile Strength a. Lengthwise direction)	-	300	-
6.1.8 Annex 4 of IS:2508:2016(Tensile Strength b. Crosswise direction)	-	300	-
6.1.9 Annex 4 of IS:2508:2016(Elongation at break - a. Lengthwise direction)	-	250	-
6.1.9 Annex 4 of IS:2508:2016(Elongation at break - b. Crosswise direction)	-	250	-
6.1.10 Annex -6 of IS:2508:2016(Dart impact Resistance)	-	300	-
7.1 Annex E(Water Potability test (after 30 Days) a) Taste b) Odour)	-	200	-
7.2 Annex F(Stack Load test)	-	200	-
7.3 Annex G(Drop test )	-	200	-
7.4 Annex H(Ink adhesion test for printed pouches)	-	200	-
7.5 Annex J(Product resistance test for printed pouches)	-	200	-
CL 6.1.11.2 and 6.1.11.3, Table 3 (i)(Barium)	-	500	-
CL 6.1.11.2 and 6.1.11.3, Table 3 (ii)(Cobalt)	-	500	-
CL 6.1.11.2 and 6.1.11.3, Table 3 (iii)(Copper)	-	500	-
CL 6.1.11.2 and 6.1.11.3, Table 3 (iv)(Iron)	-	500	-
CL 6.1.11.2 and 6.1.11.3, Table 3 (v)(Lithium)	-	500	-
CL 6.1.11.2 and 6.1.11.3, Table 3 (vi)(Manganese)	-	500	-
CL 6.1.11.2 and 6.1.11.3, Table 3 (vii)(Zinc)	-	500	-
CL 6.1.11.2 and 6.1.11.3, Table 3 (viii)(Antimony)	-	500	-
CL 6.1.11.2 and 6.1.11.3, Table 3 (ix)(Phthalic acid, bis(2-ethylhexyl) ester (DEHP))	-	1000	-

19 Apr, 2028

-
-

IS 15410 (2003)

Containers for packaging of natural mineral water and packaged drinking water - Specification

Plastic bottles/containers for Packaged Natural Mineral

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.0 (chem)(MATERIAL)	-	100	-
4.6.2(TRANSPARANCY)	-	500	-
4.6.3(LEAKAGE TEST)	-	500	-
4.6.4(DROP TEST)	-	500	-
4.6.5(MIGRATION TEST)	-	500	-
4.6.6 (chem)(Water Potability test (after 30 days) (a) Taste (b) Odour)	-	1000	-
4.6.5.1 (chem)(Colour migration (Caps))	-	200	-
4.6.5.1 (chem)(Colour migration (Container))	-	200	-
4.6.5 , IS:9845:1998 (chem)(Migration of Caps - a. Amount of extractive)	-	200	-
4.6.5 , IS:9845:1998 (chem)(Migration- b. Amount of extractive)	-	200	-
4.6.5 , IS:9845:1998 (chem)(Migration- a. Amount of extractive)	-	200	-
4.6.3, clause 6 of IS:2798:1998(Leakage test- c. Air pressure leakage)	-	200	-
4.6.3, clause 6 of IS:2798:1998(Leakage test- b. Vibration leakage)	-	200	-
4.6.3, clause 6 of IS:2798:1998(Leakage test- a. Closure leakage )	-	100	-
4.5, IS:2798:1998(Wall thickness- Bottom, in mm)	-	200	-
4.3(Workmanship, Finish & Appearance)	-	100	-
Cl.4.6.7.2 and 4.6.7.3, Table 3, (i)(Barium)	-	500	-
Cl.4.6.7.2 and 4.6.7.3, Table 3, (ii)(Cobalt)	-	500	-
Cl.4.6.7.2 and 4.6.7.3, Table 3, (iii)(Copper)	-	500	-
Cl.4.6.7.2 and 4.6.7.3, Table 3, (iv)(Iron)	-	500	-
Cl.4.6.7.2 and 4.6.7.3, Table 3, (v)(Lithium)	-	500	-
Cl.4.6.7.2 and 4.6.7.3, Table 3, (vi)(Manganese)	-	500	-
Cl.4.6.7.2 and 4.6.7.3, Table 3, (vii)(Zinc)	-	500	-
Cl.4.6.7.2 and 4.6.7.3, Table 3, (viii)(Antimony)	-	500	-
Cl.4.6.7.2 and 4.6.7.3, Table 3, (ix)(Phthalic acid, bis(2-ethylhexyl) ester (DEHP))	-	1000	-

19 Apr, 2028

-
-

IS 18573 (2024)

Cold formed welded carbon steel square and rectangular hollow sections for mechanical, general engineering and decorative purposes ï¿½ Specification

7200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 3.0(Types)	-	0	-
Clause.4.0(Carbon)	-	400	-
Clause.4.0(Sulphur)	-	400	-
Clause.4.0(Sulphur)	-	0	-
Clause.4.0(Phosphorus)	-	400	-
Clause.4.0(Silicon)	-	400	-
Clause.4.0(Manganese)	-	400	-
Clause.5.0(Supply of Material)	-	0	-
Clause.5.0(Supply of Material)	-	0	-
Clause.6.0(Workmanship)	-	0	-
Clause.7.0(Straightness)	-	0	-
Clause.8.0(Basis of Calculation)	-	0	-
Clause.9.0(Length)	-	0	-
Clause.10.0(Dimensions and properties)	-	300	-
Clause.10.0(Dimensions and properties)	-	0	-
Clause.11.0(General)	-	0	-
Clause.11.0(Outside Dimension)	-	100	-
Clause.11.0(Thickness)	-	100	-
Clause.11.0(Thickness)	-	0	-
Clause.11.0(Concavity and Convexity)	-	100	-
Clause.11.0(Squareness of Sides)	-	100	-
Clause.11.0(External Corner Radiius)	-	100	-
Clause.11.0(Straightness and twist)	-	100	-
Clause.12.0(Dimension Tolerances)	-	0	-
Clause.12.0(Dimension Tolerances)	-	0	-
Clause.13.0(Surface Protection)	-	0	-
Clause.14.0(Testing)	-	0	-
Clause.15.0(Tensile test)	-	1200	-
Clause.15.0(Yield strength)	-	1500	-
Clause.15.0(Elognation Percent)	-	1200	-
Clause.18.0(Marking)	-	100	-
6(Workmanship)	-	0	-
10(Dimensions and Properties)	-	0	-
11(Measurement of Shape and Size)	-	300	-
12(Dimensions and Tolerances)	-	0	-
13(Surface Protection)	-	0	-
15(Tensile Test)	-	0	-

19 Apr, 2028

-
Included w.e.f 07.05.2025

IS 6527 (1995)

Stainless steel wire rods - Specification (First Revision)

25700 View breakup
-

Clause No.	Exclusion	Remark
Cl 8(Heat Treatment)	-	-
Cl 9(Tensile & Hardness)	-	-
Cl 10(Diameter & Out Of Round)	-	-
Cl 8(Heat Treatment)	-	-
Cl 9(Tensile & Hardness)	-	-
Cl 10(Diameter & Out Of Round)	-	-
Cl 8(Heat Treatment)	-	-
Cl 9(Tensile & Hardness)	-	-
Cl 10(Diameter & Out Of Round)	-	-
10 & 10.1, Dia over 20 mm (Out of round)	-	-
10 & 10.1, Dia over 20 mm (Size, Tolerance)	-	-
10 & 10.1, Dia over 16 mm upto 20 mm (Out of round)	-	-
10 & 10.1, Dia over 16 mm upto 20 mm (Size, Tolerance)	-	-
10 & 10.1, Dia over 9.5 mm upto 16 mm (Out of round)	-	-
10 & 10.1, Dia over 9.5 mm upto 16 mm (Size, Tolerance)	-	-
10 & 10.1, Dia- (5.5-9.5 mm)(Out of round)	-	-
10 & 10.1, Dia- (5.5-9.5 mm)(Size, Tolerance)	-	-
9, Table 3 & 4 of IS:6527 (Designation X02Cr17Ni12Mo2)(Hardness)	-	-
9, Table 3 & 4 of IS:6527 (Designation X02Cr17Ni12Mo2)(%Elongation)	-	-
9, Table 3 & 4 of IS:6527 (Designation X02Cr17Ni12Mo2)(Ultimate Tensile Strength)	-	-
9, Table 3 & 4 of IS:6527 (Designation X02Cr17Ni12Mo2)(0.2% Proof Stress)	-	-
9, Table 3 & 4 of IS:6527 (Designation X02Cr17Ni12Mo2)(Hardness)	-	-
9, Table 3 & 4 of IS:6527 (Designation X02Cr17Ni12Mo2)(%Elongation)	-	-
9, Table 3 & 4 of IS:6527 (Designation X02Cr17Ni12Mo2)(Ultimate Tensile Strength)	-	-
9, Table 3 & 4 of IS:6527 (Designation X02Cr17Ni12Mo2)(0.2% Proof Stress)	-	-
9, Table 3 & 4 of IS:6527 (Designation X04Cr17Ni12Mo2)(Hardness)	-	-
9, Table 3 & 4 of IS:6527 (Designation X04Cr17Ni12Mo2)(%Elongation)	-	-
9, Table 3 & 4 of IS:6527 (Designation X04Cr17Ni12Mo2)(Ultimate Tensile Strength)	-	-
9, Table 3 & 4 of IS:6527 (Designation X04Cr17Ni12Mo2)(0.2% Proof Stress)	-	-
9, Table 3 & 4 of IS:6527 (Designation X07Cr18Ni9)(Hardness)	-	-
9, Table 3 & 4 of IS:6527 (Designation X07Cr18Ni9)(%Elongation)	-	-
9, Table 3 & 4 of IS:6527 (Designation X07Cr18Ni9)(Ultimate Tensile Strength)	-	-
9, Table 3 & 4 of IS:6527 (Designation X07Cr18Ni9)(0.2% Proof Stress)	-	-
9, Table 3 & 4 of IS:6527 (Designation X04Cr18Ni10)(Hardness)	-	-
9, Table 3 & 4 of IS:6527 (Designation X04Cr18Ni10)(%Elongation)	-	-
9, Table 3 & 4 of IS:6527 (Designation X04Cr18Ni10)(Ultimate Tensile Strength)	-	-
9, Table 3 & 4 of IS:6527 (Designation X04Cr18Ni10)(0.2% Proof Stress)	-	-
9, Table 3 & 4 of IS:6527 (Designation X02Cr18Ni11)(Hardness)	-	-
9, Table 3 & 4 of IS:6527 (Designation X02Cr18Ni11)(%Elongation)	-	-
9, Table 3 & 4 of IS:6527 (Designation X02Cr18Ni11)(Ultimate Tensile Strength)	-	-
9, Table 3 & 4 of IS:6527 (Designation X02Cr18Ni11)(0.2% Proof Stress)	-	-
9, Table 3 & 4 of IS:6527 (Designation X30Cr13)(Hardness)	-	-
9, Table 3 & 4 of IS:6527 (Designation X30Cr13)(Ultimate Tensile Strength)	-	-
9, Table 3 & 4 of IS:6527 (Designation X20Cr13)(Hardness)	-	-
9, Table 3 & 4 of IS:6527 (Designation X20Cr13)(Ultimate Tensile Strength)	-	-
9, Table 3 & 4 of IS:6527 (Designation X12Cr13)(Hardness)	-	-
9, Table 3 & 4 of IS:6527 (Designation X12Cr13)(%Elongation)	-	-
9, Table 3 & 4 of IS:6527 (Designation X12Cr13)(Ultimate Tensile Strength)	-	-
9, Table 3 & 4 of IS:6527 (Designation X12Cr13)(0.2% Proof Stress)	-	-
9, Table 3 & 4 of IS:6527 (Designation X04Cr13)(Hardness)	-	-
9, Table 3 & 4 of IS:6527 (Designation X04Cr13)(%Elongation)	-	-
9, Table 3 & 4 of IS:6527 (Designation X04Cr13)(Ultimate Tensile Strength)	-	-
9, Table 3 & 4 of IS:6527 (Designation X04Cr13)(0.2% Proof Stress)	-	-
8(Steel Wire rod may be supplied in the annealed condition.)	-	-
7, Table 1of IS:6527 (Designation X10Cr17Mn6Ni4)(Titanium)	-	-
7, Table 1of IS:6527 (Designation X10Cr17Mn6Ni4)(Niobium)	-	-
7, Table 1of IS:6527 (Designation X10Cr17Mn6Ni4)(Molybdenum)	-	-
7, Table 1of IS:6527 (Designation X10Cr17Mn6Ni4)(Copper)	-	-
7, Table 1of IS:6527 (Designation X10Cr17Mn6Ni4)(Nitrogen)	-	-
7, Table 1of IS:6527 (Designation X10Cr17Mn6Ni4)(Phosphorous)	-	-
7, Table 1of IS:6527 (Designation X10Cr17Mn6Ni4)(Sulphur)	-	-
7, Table 1of IS:6527 (Designation X10Cr17Mn6Ni4)(Chromium)	-	-
7, Table 1of IS:6527 (Designation X10Cr17Mn6Ni4)(Nickel)	-	-
7, Table 1of IS:6527 (Designation X10Cr17Mn6Ni4)(Manganese)	-	-
7, Table 1of IS:6527 (Designation X10Cr17Mn6Ni4)(Silicon)	-	-
7, Table 1of IS:6527 (Designation X10Cr17Mn6Ni4)(Carbon)	-	-
7, Table 1of IS:6527 (Designation X02Cr17Ni12Mo2)(Titanium)	-	-
7, Table 1of IS:6527 (Designation X02Cr17Ni12Mo2)(Niobium)	-	-
7, Table 1of IS:6527 (Designation X02Cr17Ni12Mo2)(Molybdenum)	-	-
7, Table 1of IS:6527 (Designation X02Cr17Ni12Mo2)(Copper)	-	-
7, Table 1of IS:6527 (Designation X02Cr17Ni12Mo2)(Phosphorous)	-	-
7, Table 1of IS:6527 (Designation X02Cr17Ni12Mo2)(Sulphur)	-	-
7, Table 1of IS:6527 (Designation X02Cr17Ni12Mo2)(Chromium)	-	-
7, Table 1of IS:6527 (Designation X02Cr17Ni12Mo2)(Nickel)	-	-
7, Table 1of IS:6527 (Designation X02Cr17Ni12Mo2)(Manganese)	-	-
7, Table 1of IS:6527 (Designation X02Cr17Ni12Mo2)(Silicon)	-	-
7, Table 1of IS:6527 (Designation X02Cr17Ni12Mo2)(Carbon)	-	-
7, Table 1of IS:6527 (Designation X04Cr17Ni12Mo2)(Titanium)	-	-
7, Table 1of IS:6527 (Designation X04Cr17Ni12Mo2)(Niobium)	-	-
7, Table 1of IS:6527 (Designation X04Cr17Ni12Mo2)(Molybdenum)	-	-
7, Table 1of IS:6527 (Designation X04Cr17Ni12Mo2)(Copper)	-	-
7, Table 1of IS:6527 (Designation X04Cr17Ni12Mo2)(Phosphorous)	-	-
7, Table 1of IS:6527 (Designation X04Cr17Ni12Mo2)(Sulphur)	-	-
7, Table 1of IS:6527 (Designation X04Cr17Ni12Mo2)(Chromium)	-	-
7, Table 1of IS:6527 (Designation X04Cr17Ni12Mo2)(Nickel)	-	-
7, Table 1of IS:6527 (Designation X04Cr17Ni12Mo2)(Manganese)	-	-
7, Table 1of IS:6527 (Designation X04Cr17Ni12Mo2)(Silicon)	-	-
7, Table 1of IS:6527 (Designation X04Cr17Ni12Mo2)(Carbon)	-	-
7, Table 1of IS:6527 (Designation X07Cr18Ni9)(Titanium)	-	-
7, Table 1of IS:6527 (Designation X07Cr18Ni9)(Niobium)	-	-
7, Table 1of IS:6527 (Designation X07Cr18Ni9)(Molybdenum)	-	-
7, Table 1of IS:6527 (Designation X07Cr18Ni9)(Copper)	-	-
7, Table 1of IS:6527 (Designation X07Cr18Ni9)(Phosphorous)	-	-
7, Table 1of IS:6527 (Designation X07Cr18Ni9)(Sulphur)	-	-
7, Table 1of IS:6527 (Designation X07Cr18Ni9)(Chromium)	-	-
7, Table 1of IS:6527 (Designation X07Cr18Ni9)(Nickel)	-	-
7, Table 1of IS:6527 (Designation X07Cr18Ni9)(Manganese)	-	-
7, Table 1of IS:6527 (Designation X07Cr18Ni9)(Silicon)	-	-
7, Table 1of IS:6527 (Designation X07Cr18Ni9)(Carbon)	-	-
7, Table 1of IS:6527 (Designation X04Cr18Ni10)(Titanium)	-	-
7, Table 1of IS:6527 (Designation X04Cr18Ni10)(Niobium)	-	-
7, Table 1of IS:6527 (Designation X04Cr18Ni10)(Molybdenum)	-	-
7, Table 1of IS:6527 (Designation X04Cr18Ni10)(Copper)	-	-
7, Table 1of IS:6527 (Designation X04Cr18Ni10)(Phosphorous)	-	-
7, Table 1of IS:6527 (Designation X04Cr18Ni10)(Sulphur)	-	-
7, Table 1of IS:6527 (Designation X04Cr18Ni10)(Chromium)	-	-
7, Table 1of IS:6527 (Designation X04Cr18Ni10)(Nickel)	-	-
7, Table 1of IS:6527 (Designation X04Cr18Ni10)(Manganese)	-	-
7, Table 1of IS:6527 (Designation X04Cr18Ni10)(Silicon)	-	-
7, Table 1of IS:6527 (Designation X04Cr18Ni10)(Carbon)	-	-
7, Table 1of IS:6527 (Designation X02Cr18Ni11)(Titanium)	-	-
7, Table 1of IS:6527 (Designation X02Cr18Ni11)(Niobium)	-	-
7, Table 1of IS:6527 (Designation X02Cr18Ni11)(Molybdenum)	-	-
7, Table 1of IS:6527 (Designation X02Cr18Ni11)(Copper)	-	-
7, Table 1of IS:6527 (Designation X02Cr18Ni11)(Phosphorous)	-	-
7, Table 1of IS:6527 (Designation X02Cr18Ni11)(Sulphur)	-	-
7, Table 1of IS:6527 (Designation X02Cr18Ni11)(Chromium)	-	-
7, Table 1of IS:6527 (Designation X02Cr18Ni11)(Nickel)	-	-
7, Table 1of IS:6527 (Designation X02Cr18Ni11)(Manganese)	-	-
7, Table 1of IS:6527 (Designation X02Cr18Ni11)(Silicon)	-	-
7, Table 1of IS:6527 (Designation X02Cr18Ni11)(Carbon)	-	-
7, Table 1of IS:6527 (Designation X30Cr13)(Molybdenum)	-	-
7, Table 1of IS:6527 (Designation X30Cr13)(Copper)	-	-
7, Table 1of IS:6527 (Designation X30Cr13)(Phosphorous)	-	-
7, Table 1of IS:6527 (Designation X30Cr13)(Sulphur)	-	-
7, Table 1of IS:6527 (Designation X30Cr13)(Chromium)	-	-
7, Table 1of IS:6527 (Designation X30Cr13)(Nickel)	-	-
7, Table 1of IS:6527 (Designation X30Cr13)(Manganese)	-	-
7, Table 1of IS:6527 (Designation X30Cr13)(Silicon)	-	-
7, Table 1of IS:6527 (Designation X30Cr13)(Carbon)	-	-
7, Table 1of IS:6527 (Designation X20Cr13)(Molybdenum)	-	-
7, Table 1of IS:6527 (Designation X20Cr13)(Copper)	-	-
7, Table 1of IS:6527 (Designation X20Cr13)(Phosphorous)	-	-
7, Table 1of IS:6527 (Designation X20Cr13)(Sulphur)	-	-
7, Table 1of IS:6527 (Designation X20Cr13)(Chromium)	-	-
7, Table 1of IS:6527 (Designation X20Cr13)(Nickel)	-	-
7, Table 1of IS:6527 (Designation X20Cr13)(Manganese)	-	-
7, Table 1of IS:6527 (Designation X20Cr13)(Silicon)	-	-
7, Table 1of IS:6527 (Designation X20Cr13)(Carbon)	-	-
7, Table 1of IS:6527 (Designation X12Cr13)(Molybdenum)	-	-
7, Table 1of IS:6527 (Designation X12Cr13)(Copper)	-	-
7, Table 1of IS:6527 (Designation X12Cr13)(Phosphorous)	-	-
7, Table 1of IS:6527 (Designation X12Cr13)(Sulphur)	-	-
7, Table 1of IS:6527 (Designation X12Cr13)(Chromium)	-	-
7, Table 1of IS:6527 (Designation X12Cr13)(Nickel)	-	-
7, Table 1of IS:6527 (Designation X12Cr13)(Manganese)	-	-
7, Table 1of IS:6527 (Designation X12Cr13)(Silicon)	-	-
7, Table 1of IS:6527 (Designation X12Cr13)(Carbon)	-	-
7, Table 1of IS:6527 (Designation X04Cr13)(Molybdenum)	-	-
7, Table 1of IS:6527 (Designation X04Cr13)(Copper)	-	-
7, Table 1of IS:6527 (Designation X04Cr13)(Aluminium)	-	-
7, Table 1of IS:6527 (Designation X04Cr13)(Phosphorous)	-	-
7, Table 1of IS:6527 (Designation X04Cr13)(Sulphur)	-	-
7, Table 1of IS:6527 (Designation X04Cr13)(Chromium)	-	-
7, Table 1of IS:6527 (Designation X04Cr13)(Nickel)	-	-
7, Table 1of IS:6527 (Designation X04Cr13)(Manganese)	-	-
7, Table 1of IS:6527 (Designation X04Cr13)(Silicon)	-	-
7, Table 1of IS:6527 (Designation X04Cr13)(Carbon)	-	-
6(The wire rods shall be smooth on surface and free from harmful surface defects)	-	-
Cl. 10.1(Out of Round)	-	-
Cl. 9.2 Table 4(Hardness)	-	-
Cl. 9 .1 Table 3(Elongation)	-	-
Cl. 9 .1 Table 3(0.2 % Proof Stress )	-	-
Cl. 6(Freedom from defects)	-	-
Cl 10(Diameter & Out Of Round)	-	-
Cl 9(Tensile & Hardness)	-	-
Cl 8(Heat Treatment)	-	-
Cl 8(Heat Treatment)	-	-
Cl 9(Tensile & Hardness)	-	-
Cl 10(Diameter & Out Of Round)	-	-
13(Corrosion resistance-IS 10461,Part-1 & 2)	-	-
13(Corrosion Resistance - IS 10461)	-	-
15(Marking)	-	-

19 Apr, 2028

-
Included w.e.f 07.05.2025

IS 6079 (1989)

Low alloy cast steel grtnding media - Specification (Second Revision)

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(General requirements)	-	0	-
8(Workmanship and finish)	-	0	-
9(Chemical composition)	-	0	Individual charges given for each test
9.1- Table 1- i)(carbon)	-	500	-
9.1- Table 1- ii)(Silicon)	-	500	-
9.1- Table 1- iii)(Manganese)	-	500	-
9.1- Table 1- iv)(Sulphur)	-	500	-
9.1- Table 1- v)(Phosphorus)	-	500	-
9.3(Product Analysis)	-	2000	-
9.4(Residual Elements)	-	0	Individual test charges given
11(Heat Treatment)	-	700	-
12(Hardness)	-	1400	-
13(Microstructure)	-	1000	-
14(Size)	-	100	-
15(Tolence on size)	-	100	-
17(Packing)	-	100	-
18(Marking)	-	100	-

19 Apr, 2028

-
Included w.e.f 07.05.2025

IS 7226 (1974)

Specification for cold - Rolled medium, high carbon and low alloy steel strip for general engineering purposes

5700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1 Table 1(Carbon- IS 228)	-	500	-
4.1 Table 1(Manganese- IS 228)	-	500	-
4.1 Table 1(Silicon- IS 228)	-	500	-
4.1 Table 1(Sulphur- IS 228)	-	500	-
4.1 Table 1(Phosphorous- IS 228)	-	500	-
4.1 Table 1(Chromium- IS 228)	-	500	-
4.1 Table 1(Tungsten- IS 228)	-	500	-
5(HARDNESS TEST)	-	1500	-
6( FREEDOM FROM DEFECTS)	-	200	-
9.1, Table 3(i)TOLERANCE ON WIDTH)	-	100	-
9.1, Table 4(ii)TOLERANCE ON THICKNESS)	-	100	-
9.2( Camber)	-	100	-
10(SURFACE FINISH)	-	100	-
12.1(Marking)	-	100	-
12.1(Marking)	-	0	-

19 Apr, 2028

-
Included w.e.f 07.05.2025

IS 2590 (1987)

Specification for primary aluminium ingots for remelting for general engineering purposes (Second Revision)

5700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(General requirements )	-	0	-
4(Manufacture )	-	0	-
5(Grades)	-	0	-
6.1(Chemical composition )	-	0	Individual test charges given
7.1(Shapes and sizes)	-	200	-
9(Marking)	-	200	-
Table-1, Clause - 6.1.1(Copper)	-	500	-
Table-1, Clause - 6.1.1(Iron)	-	500	-
Table-1, Clause - 6.1.1(Magnesium)	-	500	-
Table-1, Clause - 6.1.1(Manganese)	-	500	-
Table-1, Clause - 6.1.1(Titanium + Vanadium)	-	500	-
Table-1, Clause - 6.1.1(Silicon)	-	500	-
Table-1, Clause - 6.1.1(Vanadium)	-	500	-
Table-1, Clause - 6.1.1(Zinc)	-	500	-
Table-1, Clause - 6.1.1(Other elements (each))	-	1000	-
Table-1, Clause - 6.1.1(Others Total)	-	0	-
Table-1, Clause - 6.1.1(Aluminium)	-	300	-

19 Apr, 2028

-
Included w.e.f 07.05.2025

IS 13757 (1993)

Burnt Clay Fly Ash Building Bricks-specification

3600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.0(GENERAL QUALITY)	-	200	-
6.1(Dimensions)	-	500	-
6.2(Tolerances)	-	300	-
7.1(Compressive Strength)	-	1500	-
7.2(Water Absorption)	-	600	-
7.3(Efforescence)	-	400	-
9(Marking)	-	100	-
9(Marking)	-	0	-
9(Marking)	-	0	-
9(Marking)	-	0	-

19 Apr, 2028

-
Included w.e.f 07.05.2025

IS 1284 (2024)

Wrought Aluminium Alloy Bolt and Screw Stock (for General Engineering Purposes) ? Specification ( Third Revision )

9500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General requirements)	-	0	-
Cl-5(Bolt and screw)	-	0	-
Cl-6.1, Table-1(Copper)	-	500	-
Cl-6.1, Table-1(Magnesium)	-	500	-
Cl-6.1, Table-1(Silicon)	-	500	-
Cl-6.1, Table-1(Iron)	-	500	-
Cl-6.1, Table-1(Manganese)	-	500	-
Cl-6.1, Table-1(Zinc)	-	500	-
Cl-6.1, Table-1(Titaniumand/ or Other Grain RefiningElements)	-	500	-
Cl-6.1, Table-1(Chromium)	-	500	-
Cl-6.1, Table-1(Aluminium)	-	100	-
Cl-6.2, Table-2(Condition of Test)	-	100	-
Cl-6.2, Table-2(Diameter mm)	-	100	-
Cl-6.2, Table-2(0.2 Percent Proof Stress (N/mm 2))	-	1300	-
Cl-6.2, Table-2(Tensile Strength (N/mm 2))	-	1300	-
Cl-7(Diameters and tolerances)	-	300	-
Cl-8.2(Bolt and Screw Stock of Non Heat-Treatable Aluminium Alloys)	-	200	-
Cl-8.3(Bolt and Screw Stock of Heat-Treatable Aluminium Alloys)	-	200	-
Cl-9.1(Tensile Test)	-	1300	-
Cl-9.2(Head-Forming Test (Applicable Only to Bolt and Screw Stock 1.60 mm Diameter and Above))	-	400	-
Cl-11(Marking)	-	200	-
Cl-4(General requirements)	-	0	-
Cl-5(Bolt and screw)	-	0	-
Cl-6.1, Table-1(Copper)	-	0	-
Cl-6.1, Table-1(Magnesium)	-	0	-
Cl-6.1, Table-1(Silicon)	-	0	-
Cl-6.1, Table-1(Iron)	-	0	-
Cl-6.1, Table-1(Manganese)	-	0	-
Cl-6.1, Table-1(Zinc)	-	0	-
Cl-6.1, Table-1(Titaniumand/ or Other Grain RefiningElements)	-	0	-
Cl-6.1, Table-1(Chromium)	-	0	-
Cl-6.1, Table-1(Aluminium)	-	0	-
Cl-6.2, Table-2(Condition of Test)	-	0	-
Cl-6.2, Table-2(Diameter mm)	-	0	-
Cl-6.2, Table-2(0.2 Percent Proof Stress (N/mm 2))	-	0	-
Cl-6.2, Table-2(Tensile Strength (N/mm 2))	-	0	-
Cl-7(Diameters and tolerances)	-	0	-
Cl-8.2(Bolt and Screw Stock of Non Heat-Treatable Aluminium Alloys)	-	0	-
Cl-8.3(Bolt and Screw Stock of Heat-Treatable Aluminium Alloys)	-	0	-
Cl-9.1(Tensile Test)	-	0	-
Cl-9.2(Head-Forming Test (Applicable Only to Bolt and Screw Stock 1.60 mm Diameter and Above))	-	0	-
Cl-11(Marking)	-	0	-
Cl-4(General requirements)	-	0	-
Cl-5(Bolt and screw)	-	0	-
Cl-6.1, Table-1(Copper)	-	0	-
Cl-6.1, Table-1(Magnesium)	-	0	-
Cl-6.1, Table-1(Silicon)	-	0	-
Cl-6.1, Table-1(Iron)	-	0	-
Cl-6.1, Table-1(Manganese)	-	0	-
Cl-6.1, Table-1(Zinc)	-	0	-
Cl-6.1, Table-1(Titaniumand/ or Other Grain RefiningElements)	-	0	-
Cl-6.1, Table-1(Chromium)	-	0	-
Cl-6.1, Table-1(Aluminium)	-	0	-
Cl-6.2, Table-2(Condition of Test)	-	0	-
Cl-6.2, Table-2(Diameter mm)	-	0	-
Cl-6.2, Table-2(0.2 Percent Proof Stress (N/mm 2))	-	0	-
Cl-6.2, Table-2(Tensile Strength (N/mm 2))	-	0	-
Cl-7(Diameters and tolerances)	-	0	-
Cl-8.2(Bolt and Screw Stock of Non Heat-Treatable Aluminium Alloys)	-	0	-
Cl-8.3(Bolt and Screw Stock of Heat-Treatable Aluminium Alloys)	-	0	-
Cl-9.1(Tensile Test)	-	0	-
Cl-9.2(Head-Forming Test (Applicable Only to Bolt and Screw Stock 1.60 mm Diameter and Above))	-	0	-
Cl-11(Marking)	-	0	-

19 Apr, 2028

-
Included w.e.f 07.05.2025

IS 1285 (2023)

WROUGHT ALUMINIUM AND ALUMINIUM ALLOYS EXTRUDED ROUND TUBE AND HOLLOW SECTIONS FOR GENERAL ENGINEERINGPURPOSES SPECIFICATION

6800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1("The extruded round tube and hollow sections shall be sound and visually free from harmful defects. ")	-	100	-
6.2(Slight discoloration due to heat treatment, minor polishing marks and spiral marks due to roll straightening shall not be a cause for rejection.)	-	200	-
8("Dimensions and tolerances of the material shall be as laid down in the Indian Standards indicated below: a) Extruded round tube IS 2673; and b) Extruded hollow sections IS 6477.")	-	1000	-
9(" Extruded round tubes and hollow sections shall be made from alloys specified in IS 733. 9.2 The chemical analysis of the material shall be carried out either in accordance with the methods specified in IS 504 (Part 1 to 12) and IS 504 (Part 13 to 16) or by any other established instrumental/chemical method. In case of any dispute the method specified in relevant parts of IS 504 shall be used as referee method. However, when the method is not given in IS 504, the referee method shall be as agreed to between the purchaser and the manufacturer. ")	-	100	-
10(Tensile test)	-	1200	-
Cl.9.1(Aluminium- IS 504 and its parts or any other intrumental/chemical methods)	-	400	-
Cl.9.1(Copper- IS 504 and its parts or any other intrumental/chemical methods)	-	400	-
Cl.9.1(Magnesium- IS 504 and its parts or any other intrumental/chemical methods)	-	400	-
Cl.9.1(Silicon- IS 504 and its parts or any other intrumental/chemical methods)	-	400	-
Cl.9.1(Iron- IS 504 and its parts or any other intrumental/chemical methods)	-	400	-
Cl.9.1(Manganese- IS 504 and its parts or any other intrumental/chemical methods)	-	400	-
Cl.9.1(Zinc- IS 504 and its parts or any other intrumental/chemical methods)	-	400	-
Cl.9.1(Titanium and/ or other grain refining elements- IS 504 and its parts or any other intrumental/chemical methods)	-	400	-
Cl.9.1(Chromium- IS 504 and its parts or any other intrumental/chemical methods)	-	400	-
Cl.9.1(Remarks (Ti+V) - IS 504 and its parts or any other intrumental/chemical methods)	-	400	-
Cl.9.1(Remarks (Cr+Mn) - IS 504 and its parts or any other intrumental/chemical methods)	-	100	-
Cl.9.1(Remarks (Total Impurities)- IS 504 and its parts or any other intrumental/chemical methods)	-	100	-
6.1("The extruded round tube and hollow sections shall be sound and visually free from harmful defects. ")	-	0	-
6.2(Slight discoloration due to heat treatment, minor polishing marks and spiral marks due to roll straightening shall not be a cause for rejection.)	-	0	-
8("Dimensions and tolerances of the material shall be as laid down in the Indian Standards indicated below: a) Extruded round tube IS 2673; and b) Extruded hollow sections IS 6477.")	-	0	-
9(" Extruded round tubes and hollow sections shall be made from alloys specified in IS 733. 9.2 The chemical analysis of the material shall be carried out either in accordance with the methods specified in IS 504 (Part 1 to 12) and IS 504 (Part 13 to 16) or by any other established instrumental/chemical method. In case of any dispute the method specified in relevant parts of IS 504 shall be used as referee method. However, when the method is not given in IS 504, the referee method shall be as agreed to between the purchaser and the manufacturer. ")	-	0	-
10(Tensile test)	-	0	-
Cl.9.1(Aluminium- IS 504 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.9.1(Copper- IS 504 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.9.1(Magnesium- IS 504 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.9.1(Silicon- IS 504 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.9.1(Iron- IS 504 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.9.1(Manganese- IS 504 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.9.1(Zinc- IS 504 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.9.1(Titanium and/ or other grain refining elements- IS 504 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.9.1(Chromium- IS 504 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.9.1(Remarks (Ti+V) - IS 504 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.9.1(Remarks (Cr+Mn) - IS 504 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.9.1(Remarks (Total Impurities)- IS 504 and its parts or any other intrumental/chemical methods)	-	0	-

19 Apr, 2028

-
Included w.e.f 07.05.2025

IS 1542 (1992)

Sand for plaster - Secification (Second Revision)

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(General)	-	2200	-
4.2(Deterious Materials)	-	500	-
4.3(Limits of Deleterious Materials)	-	1200	Clay, Silt and test and Organic impurities
5(Grading of Sand)	-	1500	sieve analysis
7(ADDITIONAL INFORMATION TO BE FURNISHED BY THE SUPPLIER)	-	1600	Specific gravity, Density, fineness & quality of sand
4.1(General)	-	0	-
4.2(Deterious Materials)	-	0	-
4.3(Limits of Deleterious Materials)	-	0	-
5(Grading of Sand)	-	0	-
7(ADDITIONAL INFORMATION TO BE FURNISHED BY THE SUPPLIER)	-	0	-
4.1(General)	-	0	-
4.2(Deterious Materials)	-	0	-
4.3(Limits of Deleterious Materials)	-	0	-
5(Grading of Sand)	-	0	-
7(ADDITIONAL INFORMATION TO BE FURNISHED BY THE SUPPLIER)	-	0	-
4.1(General)	-	0	-
4.2(Deterious Materials)	-	0	-
4.3(Limits of Deleterious Materials)	-	0	-
5(Grading of Sand)	-	0	-
7(ADDITIONAL INFORMATION TO BE FURNISHED BY THE SUPPLIER)	-	0	-

19 Apr, 2028

-
Included w.e.f 07.05.2025

IS 15500 : Part 1 to 8 (2021)

Deepwell Handpumps Components and Special Tools Specification

209350 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.3.2 of IS 15500 : PART 2 (2021)(Other Components)	-	1000	-
3.3.1 of IS 15500 : PART 2 (2021)(Head and Cylinder Assemblies)	-	1000	-
3 of IS 15500 : PART 2 (2021)(TESTING)	-	150	-
2.2 of IS 15500 : PART 2 (2021)("2.2 The material and dimensions of the individual component shall meet the requirements given in the related part of this standard.")	-	1500	-
2.1 of IS 15500 : PART 2 (2021)("The assembly detail of different types of handpumps covered in this part shall be as given in Fig. 2.1 to 2.5.")	-	1500	-
2.1 of IS 15500 : PART 2 (2021)("The assembly detail of different types of handpumps covered in this part shall be as given in Fig. 2.1 to 2.5.")	-	1500	-
2.1 of IS 15500 : PART 2 (2021)("The assembly detail of different types of handpumps covered in this part shall be as given in Fig. 2.1 to 2.5.")	-	1500	-
2.1 of IS 15500 : PART 2 (2021)("The assembly detail of different types of handpumps covered in this part shall be as given in Fig. 2.1 to 2.5.")	-	1500	-
2.1 of IS 15500 : PART 2 (2021)("The assembly detail of different types of handpumps covered in this part shall be as given in Fig. 2.1 to 2.5.")	-	1500	-
2 of IS 15500 : PART 2 (2021)(CONSTRUCTION)	-	1500	-
3.3.4 of IS 15500 : PART 3 (2021)(" Valve Assemblies ")	-	1600	-
3.3.3 of IS 15500 : PART 3 (2021)("Cylinder Assembly ")	-	1500	-
3.3.2 of IS 15500 : PART 3 (2021)("Handle Assembly ")	-	1500	-
3.3.1 of IS 15500 : PART 3 (2021)(Head Assembly)	-	1500	-
3 of IS 15500 : PART 3 (2021)(TESTING)	-	150	-
2.2 of IS 15500 : PART 3 (2021)("2.2 The material and dimensions of the individual component shall meet the requirements given in the related part of this standard.")	-	1250	-
2.1 of IS 15500 : PART 3 (2021)("The assembly details of different handpump subassemblies covered in this part shall be as given in Fig. 3.1 to 3.14.")	-	150	-
2.1 of IS 15500 : PART 3 (2021)("The assembly details of different handpump subassemblies covered in this part shall be as given in Fig. 3.1 to 3.14.")	-	1500	-
2.1 of IS 15500 : PART 3 (2021)("The assembly details of different handpump subassemblies covered in this part shall be as given in Fig. 3.1 to 3.14.")	-	1500	-
2.1 of IS 15500 : PART 3 (2021)("The assembly details of different handpump subassemblies covered in this part shall be as given in Fig. 3.1 to 3.14.")	-	1500	-
2.1 of IS 15500 : PART 3 (2021)("The assembly details of different handpump subassemblies covered in this part shall be as given in Fig. 3.1 to 3.14.")	-	1500	-
2.1 of IS 15500 : PART 3 (2021)("The assembly details of different handpump subassemblies covered in this part shall be as given in Fig. 3.1 to 3.14.")	-	1500	-
2.1 of IS 15500 : PART 3 (2021)("The assembly details of different handpump subassemblies covered in this part shall be as given in Fig. 3.1 to 3.14.")	-	1500	-
2.1 of IS 15500 : PART 3 (2021)("The assembly details of different handpump subassemblies covered in this part shall be as given in Fig. 3.1 to 3.14.")	-	1500	-
2.1 of IS 15500 : PART 3 (2021)("The assembly details of different handpump subassemblies covered in this part shall be as given in Fig. 3.1 to 3.14.")	-	1250	-
2.1 of IS 15500 : PART 3 (2021)("The assembly details of different handpump subassemblies covered in this part shall be as given in Fig. 3.1 to 3.14.")	-	1250	-
2.1 of IS 15500 : PART 3 (2021)("The assembly details of different handpump subassemblies covered in this part shall be as given in Fig. 3.1 to 3.14.")	-	1500	-
2.1 of IS 15500 : PART 3 (2021)("The assembly details of different handpump subassemblies covered in this part shall be as given in Fig. 3.1 to 3.14.")	-	1000	-
2.1 of IS 15500 : PART 3 (2021)("The assembly details of different handpump subassemblies covered in this part shall be as given in Fig. 3.1 to 3.14.")	-	1250	-
2.1 of IS 15500 : PART 3 (2021)("The assembly details of different handpump subassemblies covered in this part shall be as given in Fig. 3.1 to 3.14.")	-	1500	-
2 of IS 15500 : PART 3 (2021)(CONSTRUCTION)	-	1500	-
Fig. 6.13 of IS 15500 : PART 6 (2021)(Check Valve Seat-VLOM 65)	-	1000	-
Fig. 6.13 of IS 15500 : PART 6 (2021)(Check Valve Seat-VLOM 65)	-	1250	-
Fig. 6.12 of IS 15500 : PART 6 (2021)("Check Valve Seat-Standard (for SDWP & EDWP)")	-	1250	-
3.5 of IS 15500 : PART 4 (2021)("The connecting rods/plunger rods shall be examined for straightness and formation of threads.")	-	200	-
Fig. 6.11 of IS 15500 : PART 6 (2021)("Rubber Seat Retainer (for SDWP, EDWP & FLP)")	-	1000	-
Fig. 6.11 of IS 15500 : PART 6 (2021)("Rubber Seat Retainer (for SDWP, EDWP & FLP)")	-	1250	-
Fig. 6.9 of IS 15500 : PART 6 (2021)(" Check Valve-Standard (for SDWP, EDWP and FLP)")	-	1000	-
3.4 of IS 15500 : PART 4 (2021)("The flanges shall be reasonably flat to provide proper matching of the holes to ensure unrestricted insertion of the bolts when assembled with counterpart.")	-	100	-
3.4 of IS 15500 : PART 4 (2021)("The flanges shall be reasonably flat to provide proper matching of the holes to ensure unrestricted insertion of the bolts when assembled with counterpart.")	-	100	-
Fig. 6.7 of IS 15500 : PART 6 (2021)(Follower-EDW)	-	1000	-
3 of IS 15500 : PART 4 (2021)(TESTING)	-	100	-
Fig. 6.7 of IS 15500 : PART 6 (2021)(Follower-EDW)	-	1000	-
Fig. 6.6 of IS 15500 : PART 6 (2021)(Follower (SDWP and FLP))	-	1000	-
2.4 of IS 15500 : PART 4 (2021)("Stainless Steel top connecting rod shall be as given in Fig. 4.21B")	-	1000	-
Fig. 6.6 of IS 15500 : PART 6 (2021)(Follower (SDWP and FLP))	-	1000	-
2.3 of IS 15500 : PART 4 (2021)("The steel components shall be given anti-corrosive treatment as mentioned in 6 of Part 1. in Fig. 4.21B")	-	1000	-
2.2 of IS 15500 : PART 4 (2021)("2.2 The material and dimensions of the individual component shall meet the requirements given in the related part of this standard.")	-	150	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	1250	-
Fig. 6.5 of IS 15500 : PART 6 (2021)("Bucket Spacer-Lower (for EDWP)")	-	1000	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	1000	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	1500	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	1250	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	1250	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	1250	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	1250	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	1250	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	1250	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	1250	-
Fig. 6.5 of IS 15500 : PART 6 (2021)("Bucket Spacer-Lower (for EDWP)")	-	1250	-
Fig. 6.5 of IS 15500 : PART 6 (2021)("Bucket Spacer-Lower (for EDWP)")	-	1250	-
Fig. 6.5 of IS 15500 : PART 6 (2021)("Bucket Spacer-Lower (for EDWP)")	-	1250	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	1250	-
Fig. 6.5 of IS 15500 : PART 6 (2021)("Bucket Spacer-Lower (for EDWP)")	-	1000	-
Fig. 6.4 of IS 15500 : PART 6 (2021)(" Bucket Spacer-Standard (for SDWP, EDWP, VLOM 65 and FLP)")	-	1000	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	1250	-
Fig. 6.4 of IS 15500 : PART 6 (2021)(" Bucket Spacer-Standard (for SDWP, EDWP, VLOM 65 and FLP)")	-	1250	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	1250	-
Fig. 6.4 of IS 15500 : PART 6 (2021)(" Bucket Spacer-Standard (for SDWP, EDWP, VLOM 65 and FLP)")	-	1250	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	1250	-
Fig. 6.4 of IS 15500 : PART 6 (2021)(" Bucket Spacer-Standard (for SDWP, EDWP, VLOM 65 and FLP)")	-	1250	-
Fig. 6.4 of IS 15500 : PART 6 (2021)(" Bucket Spacer-Standard (for SDWP, EDWP, VLOM 65 and FLP)")	-	1250	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	1250	-
Fig. 6.4 of IS 15500 : PART 6 (2021)(" Bucket Spacer-Standard (for SDWP, EDWP, VLOM 65 and FLP)")	-	1000	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	1250	-
Fig. 6.4 of IS 15500 : PART 6 (2021)(" Bucket Spacer-Standard (for SDWP, EDWP, VLOM 65 and FLP)")	-	1200	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	1000	-
Fig. 6.3 of IS 15500 : PART 6 (2021)(Upper Valve (for SDWP, EDWP, VLOM 65 and FLP))	-	1000	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	1000	-
Fig. 6.3 of IS 15500 : PART 6 (2021)(Upper Valve (for SDWP, EDWP, VLOM 65 and FLP))	-	1000	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	1000	-
Fig. 6.3 of IS 15500 : PART 6 (2021)(Upper Valve (for SDWP, EDWP, VLOM 65 and FLP))	-	1000	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	1000	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	1000	-
Fig. 6.2 of IS 15500 : PART 6 (2021)("Plunger Yoka Body (for SDWP, EDWP, VLOM 65 and FLP)")	-	1000	-
Fig. 6.2 of IS 15500 : PART 6 (2021)("Plunger Yoka Body (for SDWP, EDWP, VLOM 65 and FLP)")	-	1000	-
Fig. 6.2 of IS 15500 : PART 6 (2021)("Plunger Yoka Body (for SDWP, EDWP, VLOM 65 and FLP)")	-	1000	-
Fig. 6.1 of IS 15500 : PART 6 (2021)(Brass Liner)	-	1000	-
3.1 of IS 15500 : PART 7 (2021)("3.3 The critical dimensions and hardness of all the components selected as per 3.2 shall be checked for conformance with the relevant figures given in this part part shall be treated as a separate lot.")	-	1000	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	1000	-
3 of IS 15500 : PART 7 (2021)(TESTING)	-	100	-
2.2 of IS 15500 : PART 7 (2021)(" The material and dimensions shall meet the related prerequisites given in 4 and 5 of Part 1.")	-	1000	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	1000	-
2.1 of IS 15500 : PART 7 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 7.1 to 7.18.")	-	1000	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	1000	-
2.1 of IS 15500 : PART 7 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 7.1 to 7.18.")	-	1000	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	1000	-
2.1 of IS 15500 : PART 7 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 7.1 to 7.18.")	-	1000	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	1000	-
2.1 of IS 15500 : PART 7 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 7.1 to 7.18.")	-	1000	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	1000	-
2.1 of IS 15500 : PART 7 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 7.1 to 7.18.")	-	1200	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	1000	-
2.1 of IS 15500 : PART 7 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 7.1 to 7.18.")	-	1200	-
2.1 of IS 15500 : PART 7 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 7.1 to 7.18.")	-	1200	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	1200	-
2.1 of IS 15500 : PART 7 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 7.1 to 7.18.")	-	1200	-
2.1 of IS 15500 : PART 7 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 7.1 to 7.18.")	-	1200	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	1200	-
2.1 of IS 15500 : PART 7 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 7.1 to 7.18.")	-	1000	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	1000	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	1000	-
2.1 of IS 15500 : PART 7 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 7.1 to 7.18.")	-	1200	-
2.1 of IS 15500 : PART 7 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 7.1 to 7.18.")	-	1000	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	1000	-
2.1 of IS 15500 : PART 7 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 7.1 to 7.18.")	-	1000	-
2.1 of IS 15500 : PART 7 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 7.1 to 7.18.")	-	1000	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	1000	-
2.1 of IS 15500 : PART 7 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 7.1 to 7.18.")	-	1000	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	1000	-
2.1 of IS 15500 : PART 7 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 7.1 to 7.18.")	-	1000	-
2.1 of IS 15500 : PART 7 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 7.1 to 7.18.")	-	1000	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	1000	-
2.1 of IS 15500 : PART 7 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 7.1 to 7.18.")	-	1000	-
2.1 of IS 15500 : PART 7 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 7.1 to 7.18.")	-	1000	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	1000	-
2 of IS 15500 : PART 7 (2021)(CONSTRUCTION)	-	1000	-
2 of IS 15500 : PART 4 (2021)(CONSTRUCTION)	-	1000	-
Fig. 6.2 of IS 15500 : PART 5 (2021)("Plunger Yoka Body (for SDWP, EDWP, VLOM 65 and FLP)")	-	1000	-
Fig. 6.1 of IS 15500 : PART 5 (2021)(Brass Liner)	-	1000	-
Fig. 5.6 B of IS 15500 : PART 5 (2021)(Cylinder Caps-VLOM 50)	-	1000	-
Fig. 5.6 B of IS 15500 : PART 5 (2021)(Cylinder Caps-VLOM 50)	-	1000	-
Fig. 5.6 B of IS 15500 : PART 5 (2021)(Cylinder Caps-VLOM 50)	-	1000	-
Fig. 5.6 B of IS 15500 : PART 5 (2021)(Cylinder Caps-VLOM 50)	-	1000	-
Fig. 5.6 B of IS 15500 : PART 5 (2021)(Cylinder Caps-VLOM 50)	-	1000	-
5.3.7.2 of IS 15500 : PART 8 (2021)(" A similar test shall be done on the connecting rod vice by using 12 mm diameter drawn bar and a load of 200 kgf. There shall be no slippage of the bar.")	-	1000	-
Fig. 5.6 A of IS 15500 : PART 5 (2021)(Cylinder Caps-VLOM 50)	-	1000	-
5.3.7.1.1 of IS 15500 : PART 8 (2021)(Mandrel size)	-	1000	-
5.3.7 of IS 15500 : PART 8 (2021)(Clamping Test)	-	1000	-
5.3.6.1 of IS 15500 : PART 8 (2021)(" In case of assembly, all the components shall be dismantled and tested likewise.")	-	250	-
5.3.6 of IS 15500 : PART 8 (2021)(" Two samples out of the batch selected shall be checked for dimensional and other requirements given in respective figures.")	-	250	-
5.3.5 of IS 15500 : PART 8 (2021)(" Incase of the Connecting Rod Vice ")	-	250	-
5.3.4 of IS 15500 : PART 8 (2021)(In case of the Self-locking Clamp)	-	250	-
5.3.3 of IS 15500 : PART 8 (2021)(" The movement of the screws of the heavy duty clamp and the connecting rod vice shall be easy without undue slackness or resistance throughout the opening. Proper alignment of their jaws shall be ensured.")	-	250	-
5.3.2 of IS 15500 : PART 8 (2021)(" The base plates of the clamps and/or vice shall be reasonably flat to provide proper matching of holes to ensure unrestricted insertion of bolts when fitted on respective flanges of the handpump.")	-	250	-
5.3.1 of IS 15500 : PART 8 (2021)(" All the tools shall be examined for finish, workmanship and visual defects.")	-	250	-
5 of IS 15500 : PART 8 (2021)(TESTING)	-	200	-
4.2 of IS 15500 : PART 8 (2021)(Painting)	-	500	-
4.1 of IS 15500 : PART 8 (2021)(Electro-galvanizing)	-	500	-
4 of IS 15500 : PART 8 (2021)(ANTI-CORROSIVE TREATMENT)	-	500	-
3.3.1 of IS 15500 : PART 8 (2021)(" The hinged lid shall be provided with suitable arrangement for putting a lock.")	-	200	-
3.3 of IS 15500 : PART 8 (2021)(" The tool box shall be made of 1 mm nominal thick CRCA steel sheet (see IS 513), with the overall dimensions given below: Length 440 mm Width 320 mm Height 110 mm")	-	300	-
3.2 of IS 15500 : PART 8 (2021)("2.2 The material and dimensions of the individual component shall meet the requirements given in the related part of this standard.")	-	300	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	500	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	500	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	500	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	500	-
Fig. 5.6 A of IS 15500 : PART 5 (2021)(Cylinder Caps-VLOM 50)	-	1000	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	500	-
Fig. 5.6 A of IS 15500 : PART 5 (2021)(Cylinder Caps-VLOM 50)	-	1000	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	1000	-
Fig. 5.6 A of IS 15500 : PART 5 (2021)(Cylinder Caps-VLOM 50)	-	1000	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	1000	-
Fig. 5.5 B of IS 15500 : PART 5 (2021)("Cylinder Caps-VLOM 65 (for SDWP and EDWP)")	-	1000	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	1000	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	1000	-
Fig. 5.5 B of IS 15500 : PART 5 (2021)("Cylinder Caps-VLOM 65 (for SDWP and EDWP)")	-	1000	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	1000	-
Fig. 5.5 B of IS 15500 : PART 5 (2021)("Cylinder Caps-VLOM 65 (for SDWP and EDWP)")	-	1000	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	1000	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	1000	-
Fig. 5.5 A of IS 15500 : PART 5 (2021)("Cylinder Caps-VLOM 65 (for SDWP and EDWP)")	-	1000	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	1000	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	1000	-
Fig. 5.5 A of IS 15500 : PART 5 (2021)("Cylinder Caps-VLOM 65 (for SDWP and EDWP)")	-	1000	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	1000	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	1000	-
Fig. 5.4 of IS 15500 : PART 5 (2021)("Reducer Cap (for SDWP, EDWP and FLP)")	-	1000	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	1000	-
Fig. 5.4 of IS 15500 : PART 5 (2021)("Reducer Cap (for SDWP, EDWP and FLP)")	-	1000	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	1000	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	1000	-
Fig. 5.4 of IS 15500 : PART 5 (2021)("Reducer Cap (for SDWP, EDWP and FLP)")	-	1000	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	1000	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	1000	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	1000	-
Fig. 5.4 of IS 15500 : PART 5 (2021)("Reducer Cap (for SDWP, EDWP and FLP)")	-	1000	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	1000	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	1000	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	1000	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	1000	-
Fig. 5.3 of IS 15500 : PART 5 (2021)(Cylinder Body-VLOM 50)	-	1000	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	1000	-
Fig. 5.3 of IS 15500 : PART 5 (2021)(Cylinder Body-VLOM 50)	-	1000	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	1000	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	1000	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	1000	-
Fig. 5.2 of IS 15500 : PART 5 (2021)(Cylinder Body-Long (for EDWP and VLOM 65))	-	1000	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	1000	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	1000	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	1000	-
Fig. 5.2 of IS 15500 : PART 5 (2021)(Cylinder Body-Long (for EDWP and VLOM 65))	-	1000	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	1000	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	1000	-
Fig. 5.2 of IS 15500 : PART 5 (2021)(Cylinder Body-Long (for EDWP and VLOM 65))	-	1000	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	1000	-
3 of IS 15500 : PART 8 (2021)(CONSTRUCTION)	-	500	-
Fig. 5.1 of IS 15500 : PART 5 (2021)(Cylinder Body-Standard (for SDWP and FLP))	-	1000	-
Fig. 5.1 of IS 15500 : PART 5 (2021)(Cylinder Body-Standard (for SDWP and FLP))	-	1000	-
Fig. 5.1 of IS 15500 : PART 5 (2021)(DEEPWELL HANDPUMPS, COMPONENTS AND SPECIAL TOOLS — SPECIFICATION PART 5 CAST IRON COMPONENTS)	-	1000	-
2.2 of IS 15500 : PART 3 (2021)("2.2 The material and dimensions of the individual component shall meet the requirements given in the related part of this standard.")	-	0	-
3.3.1 of IS 15500 : PART 2 (2021)(Head and Cylinder Assemblies)	-	0	-
3 of IS 15500 : PART 2 (2021)(TESTING)	-	0	-
2.2 of IS 15500 : PART 2 (2021)("2.2 The material and dimensions of the individual component shall meet the requirements given in the related part of this standard.")	-	0	-
2.1 of IS 15500 : PART 2 (2021)("The assembly detail of different types of handpumps covered in this part shall be as given in Fig. 2.1 to 2.5.")	-	0	-
2.1 of IS 15500 : PART 2 (2021)("The assembly detail of different types of handpumps covered in this part shall be as given in Fig. 2.1 to 2.5.")	-	0	-
2.1 of IS 15500 : PART 2 (2021)("The assembly detail of different types of handpumps covered in this part shall be as given in Fig. 2.1 to 2.5.")	-	0	-
2.1 of IS 15500 : PART 2 (2021)("The assembly detail of different types of handpumps covered in this part shall be as given in Fig. 2.1 to 2.5.")	-	0	-
2.1 of IS 15500 : PART 2 (2021)("The assembly detail of different types of handpumps covered in this part shall be as given in Fig. 2.1 to 2.5.")	-	0	-
2 of IS 15500 : PART 2 (2021)(CONSTRUCTION)	-	0	-
3.3.4 of IS 15500 : PART 3 (2021)(" Valve Assemblies ")	-	0	-
3.3.3 of IS 15500 : PART 3 (2021)("Cylinder Assembly ")	-	0	-
3.3.2 of IS 15500 : PART 3 (2021)("Handle Assembly ")	-	0	-
3.3.1 of IS 15500 : PART 3 (2021)(Head Assembly)	-	0	-
3 of IS 15500 : PART 3 (2021)(TESTING)	-	0	-
2.1 of IS 15500 : PART 3 (2021)("The assembly details of different handpump subassemblies covered in this part shall be as given in Fig. 3.1 to 3.14.")	-	0	-
2.1 of IS 15500 : PART 3 (2021)("The assembly details of different handpump subassemblies covered in this part shall be as given in Fig. 3.1 to 3.14.")	-	0	-
2.1 of IS 15500 : PART 3 (2021)("The assembly details of different handpump subassemblies covered in this part shall be as given in Fig. 3.1 to 3.14.")	-	0	-
2.1 of IS 15500 : PART 3 (2021)("The assembly details of different handpump subassemblies covered in this part shall be as given in Fig. 3.1 to 3.14.")	-	0	-
2.1 of IS 15500 : PART 3 (2021)("The assembly details of different handpump subassemblies covered in this part shall be as given in Fig. 3.1 to 3.14.")	-	0	-
2.1 of IS 15500 : PART 3 (2021)("The assembly details of different handpump subassemblies covered in this part shall be as given in Fig. 3.1 to 3.14.")	-	0	-
2.1 of IS 15500 : PART 3 (2021)("The assembly details of different handpump subassemblies covered in this part shall be as given in Fig. 3.1 to 3.14.")	-	0	-
2.1 of IS 15500 : PART 3 (2021)("The assembly details of different handpump subassemblies covered in this part shall be as given in Fig. 3.1 to 3.14.")	-	0	-
2.1 of IS 15500 : PART 3 (2021)("The assembly details of different handpump subassemblies covered in this part shall be as given in Fig. 3.1 to 3.14.")	-	0	-
2.1 of IS 15500 : PART 3 (2021)("The assembly details of different handpump subassemblies covered in this part shall be as given in Fig. 3.1 to 3.14.")	-	0	-
2.1 of IS 15500 : PART 3 (2021)("The assembly details of different handpump subassemblies covered in this part shall be as given in Fig. 3.1 to 3.14.")	-	0	-
2.1 of IS 15500 : PART 3 (2021)("The assembly details of different handpump subassemblies covered in this part shall be as given in Fig. 3.1 to 3.14.")	-	0	-
2.1 of IS 15500 : PART 3 (2021)("The assembly details of different handpump subassemblies covered in this part shall be as given in Fig. 3.1 to 3.14.")	-	0	-
2.1 of IS 15500 : PART 3 (2021)("The assembly details of different handpump subassemblies covered in this part shall be as given in Fig. 3.1 to 3.14.")	-	0	-
2 of IS 15500 : PART 3 (2021)(CONSTRUCTION)	-	0	-
Fig. 6.13 of IS 15500 : PART 6 (2021)(Check Valve Seat-VLOM 65)	-	0	-
Fig. 6.13 of IS 15500 : PART 6 (2021)(Check Valve Seat-VLOM 65)	-	0	-
Fig. 6.12 of IS 15500 : PART 6 (2021)("Check Valve Seat-Standard (for SDWP & EDWP)")	-	0	-
3.5 of IS 15500 : PART 4 (2021)("The connecting rods/plunger rods shall be examined for straightness and formation of threads.")	-	0	-
Fig. 6.11 of IS 15500 : PART 6 (2021)("Rubber Seat Retainer (for SDWP, EDWP & FLP)")	-	0	-
Fig. 6.11 of IS 15500 : PART 6 (2021)("Rubber Seat Retainer (for SDWP, EDWP & FLP)")	-	0	-
Fig. 6.9 of IS 15500 : PART 6 (2021)(" Check Valve-Standard (for SDWP, EDWP and FLP)")	-	0	-
3.4 of IS 15500 : PART 4 (2021)("The flanges shall be reasonably flat to provide proper matching of the holes to ensure unrestricted insertion of the bolts when assembled with counterpart.")	-	0	-
5.3.7.2 of IS 15500 : PART 8 (2021)(" A similar test shall be done on the connecting rod vice by using 12 mm diameter drawn bar and a load of 200 kgf. There shall be no slippage of the bar.")	-	0	-
Fig. 6.7 of IS 15500 : PART 6 (2021)(Follower-EDW)	-	0	-
3 of IS 15500 : PART 4 (2021)(TESTING)	-	0	-
Fig. 6.7 of IS 15500 : PART 6 (2021)(Follower-EDW)	-	0	-
Fig. 6.6 of IS 15500 : PART 6 (2021)(Follower (SDWP and FLP))	-	0	-
2.4 of IS 15500 : PART 4 (2021)("Stainless Steel top connecting rod shall be as given in Fig. 4.21B")	-	0	-
Fig. 6.6 of IS 15500 : PART 6 (2021)(Follower (SDWP and FLP))	-	0	-
2.3 of IS 15500 : PART 4 (2021)("The steel components shall be given anti-corrosive treatment as mentioned in 6 of Part 1. in Fig. 4.21B")	-	0	-
2.2 of IS 15500 : PART 4 (2021)("2.2 The material and dimensions of the individual component shall meet the requirements given in the related part of this standard.")	-	0	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	0	-
Fig. 6.5 of IS 15500 : PART 6 (2021)("Bucket Spacer-Lower (for EDWP)")	-	0	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	0	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	0	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	0	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	0	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	0	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	0	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	0	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	0	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	0	-
Fig. 6.5 of IS 15500 : PART 6 (2021)("Bucket Spacer-Lower (for EDWP)")	-	0	-
Fig. 6.5 of IS 15500 : PART 6 (2021)("Bucket Spacer-Lower (for EDWP)")	-	0	-
Fig. 6.5 of IS 15500 : PART 6 (2021)("Bucket Spacer-Lower (for EDWP)")	-	0	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	0	-
Fig. 6.5 of IS 15500 : PART 6 (2021)("Bucket Spacer-Lower (for EDWP)")	-	0	-
Fig. 6.4 of IS 15500 : PART 6 (2021)(" Bucket Spacer-Standard (for SDWP, EDWP, VLOM 65 and FLP)")	-	0	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	0	-
Fig. 6.4 of IS 15500 : PART 6 (2021)(" Bucket Spacer-Standard (for SDWP, EDWP, VLOM 65 and FLP)")	-	0	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	0	-
Fig. 6.4 of IS 15500 : PART 6 (2021)(" Bucket Spacer-Standard (for SDWP, EDWP, VLOM 65 and FLP)")	-	0	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	0	-
Fig. 6.4 of IS 15500 : PART 6 (2021)(" Bucket Spacer-Standard (for SDWP, EDWP, VLOM 65 and FLP)")	-	0	-
Fig. 6.4 of IS 15500 : PART 6 (2021)(" Bucket Spacer-Standard (for SDWP, EDWP, VLOM 65 and FLP)")	-	0	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	0	-
Fig. 6.4 of IS 15500 : PART 6 (2021)(" Bucket Spacer-Standard (for SDWP, EDWP, VLOM 65 and FLP)")	-	0	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	0	-
Fig. 6.4 of IS 15500 : PART 6 (2021)(" Bucket Spacer-Standard (for SDWP, EDWP, VLOM 65 and FLP)")	-	0	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	0	-
Fig. 6.3 of IS 15500 : PART 6 (2021)(Upper Valve (for SDWP, EDWP, VLOM 65 and FLP))	-	0	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	0	-
Fig. 6.3 of IS 15500 : PART 6 (2021)(Upper Valve (for SDWP, EDWP, VLOM 65 and FLP))	-	0	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	0	-
Fig. 6.3 of IS 15500 : PART 6 (2021)(Upper Valve (for SDWP, EDWP, VLOM 65 and FLP))	-	0	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	0	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	0	-
Fig. 6.2 of IS 15500 : PART 6 (2021)("Plunger Yoka Body (for SDWP, EDWP, VLOM 65 and FLP)")	-	0	-
Fig. 6.2 of IS 15500 : PART 6 (2021)("Plunger Yoka Body (for SDWP, EDWP, VLOM 65 and FLP)")	-	0	-
Fig. 6.2 of IS 15500 : PART 6 (2021)("Plunger Yoka Body (for SDWP, EDWP, VLOM 65 and FLP)")	-	0	-
Fig. 6.1 of IS 15500 : PART 6 (2021)(Brass Liner)	-	0	-
3.1 of IS 15500 : PART 7 (2021)("3.3 The critical dimensions and hardness of all the components selected as per 3.2 shall be checked for conformance with the relevant figures given in this part part shall be treated as a separate lot.")	-	0	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	0	-
3 of IS 15500 : PART 7 (2021)(TESTING)	-	0	-
2.2 of IS 15500 : PART 7 (2021)(" The material and dimensions shall meet the related prerequisites given in 4 and 5 of Part 1.")	-	0	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	0	-
2.1 of IS 15500 : PART 7 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 7.1 to 7.18.")	-	0	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	0	-
2.1 of IS 15500 : PART 7 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 7.1 to 7.18.")	-	0	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	0	-
2.1 of IS 15500 : PART 7 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 7.1 to 7.18.")	-	0	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	0	-
2.1 of IS 15500 : PART 7 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 7.1 to 7.18.")	-	0	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	0	-
2.1 of IS 15500 : PART 7 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 7.1 to 7.18.")	-	0	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	0	-
2.1 of IS 15500 : PART 7 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 7.1 to 7.18.")	-	0	-
2.1 of IS 15500 : PART 7 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 7.1 to 7.18.")	-	0	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	0	-
2.1 of IS 15500 : PART 7 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 7.1 to 7.18.")	-	0	-
2.1 of IS 15500 : PART 7 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 7.1 to 7.18.")	-	0	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	0	-
2.1 of IS 15500 : PART 7 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 7.1 to 7.18.")	-	0	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	0	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	0	-
2.1 of IS 15500 : PART 7 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 7.1 to 7.18.")	-	0	-
2.1 of IS 15500 : PART 7 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 7.1 to 7.18.")	-	0	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	0	-
2.1 of IS 15500 : PART 7 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 7.1 to 7.18.")	-	0	-
2.1 of IS 15500 : PART 7 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 7.1 to 7.18.")	-	0	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	0	-
2.1 of IS 15500 : PART 7 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 7.1 to 7.18.")	-	0	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	0	-
2.1 of IS 15500 : PART 7 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 7.1 to 7.18.")	-	0	-
2.1 of IS 15500 : PART 7 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 7.1 to 7.18.")	-	0	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	0	-
2.1 of IS 15500 : PART 7 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 7.1 to 7.18.")	-	0	-
2.1 of IS 15500 : PART 7 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 7.1 to 7.18.")	-	0	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	0	-
2 of IS 15500 : PART 7 (2021)(CONSTRUCTION)	-	0	-
2 of IS 15500 : PART 4 (2021)(CONSTRUCTION)	-	0	-
Fig. 6.2 of IS 15500 : PART 5 (2021)("Plunger Yoka Body (for SDWP, EDWP, VLOM 65 and FLP)")	-	0	-
Fig. 6.1 of IS 15500 : PART 5 (2021)(Brass Liner)	-	0	-
Fig. 5.6 B of IS 15500 : PART 5 (2021)(Cylinder Caps-VLOM 50)	-	0	-
Fig. 5.6 B of IS 15500 : PART 5 (2021)(Cylinder Caps-VLOM 50)	-	0	-
Fig. 5.6 B of IS 15500 : PART 5 (2021)(Cylinder Caps-VLOM 50)	-	0	-
Fig. 5.6 B of IS 15500 : PART 5 (2021)(Cylinder Caps-VLOM 50)	-	0	-
Fig. 5.6 B of IS 15500 : PART 5 (2021)(Cylinder Caps-VLOM 50)	-	0	-
Fig. 5.6 A of IS 15500 : PART 5 (2021)(Cylinder Caps-VLOM 50)	-	0	-
5.3.7.1.1 of IS 15500 : PART 8 (2021)(Mandrel size)	-	0	-
5.3.7 of IS 15500 : PART 8 (2021)(Clamping Test)	-	0	-
5.3.6.1 of IS 15500 : PART 8 (2021)(" In case of assembly, all the components shall be dismantled and tested likewise.")	-	0	-
5.3.6 of IS 15500 : PART 8 (2021)(" Two samples out of the batch selected shall be checked for dimensional and other requirements given in respective figures.")	-	0	-
5.3.5 of IS 15500 : PART 8 (2021)(" Incase of the Connecting Rod Vice ")	-	0	-
5.3.4 of IS 15500 : PART 8 (2021)(In case of the Self-locking Clamp)	-	0	-
5.3.3 of IS 15500 : PART 8 (2021)(" The movement of the screws of the heavy duty clamp and the connecting rod vice shall be easy without undue slackness or resistance throughout the opening. Proper alignment of their jaws shall be ensured.")	-	0	-
5.3.2 of IS 15500 : PART 8 (2021)(" The base plates of the clamps and/or vice shall be reasonably flat to provide proper matching of holes to ensure unrestricted insertion of bolts when fitted on respective flanges of the handpump.")	-	0	-
5.3.1 of IS 15500 : PART 8 (2021)(" All the tools shall be examined for finish, workmanship and visual defects.")	-	0	-
5 of IS 15500 : PART 8 (2021)(TESTING)	-	0	-
4.2 of IS 15500 : PART 8 (2021)(Painting)	-	0	-
4.1 of IS 15500 : PART 8 (2021)(Electro-galvanizing)	-	0	-
4 of IS 15500 : PART 8 (2021)(ANTI-CORROSIVE TREATMENT)	-	0	-
3.3.1 of IS 15500 : PART 8 (2021)(" The hinged lid shall be provided with suitable arrangement for putting a lock.")	-	0	-
3.3 of IS 15500 : PART 8 (2021)(" The tool box shall be made of 1 mm nominal thick CRCA steel sheet (see IS 513), with the overall dimensions given below: Length 440 mm Width 320 mm Height 110 mm")	-	0	-
3.2 of IS 15500 : PART 8 (2021)("2.2 The material and dimensions of the individual component shall meet the requirements given in the related part of this standard.")	-	0	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	0	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	0	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	0	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	0	-
Fig. 5.6 A of IS 15500 : PART 5 (2021)(Cylinder Caps-VLOM 50)	-	0	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	0	-
Fig. 5.6 A of IS 15500 : PART 5 (2021)(Cylinder Caps-VLOM 50)	-	0	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	0	-
Fig. 5.6 A of IS 15500 : PART 5 (2021)(Cylinder Caps-VLOM 50)	-	0	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	0	-
Fig. 5.5 B of IS 15500 : PART 5 (2021)("Cylinder Caps-VLOM 65 (for SDWP and EDWP)")	-	0	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	0	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	0	-
Fig. 5.5 B of IS 15500 : PART 5 (2021)("Cylinder Caps-VLOM 65 (for SDWP and EDWP)")	-	0	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	0	-
Fig. 5.5 B of IS 15500 : PART 5 (2021)("Cylinder Caps-VLOM 65 (for SDWP and EDWP)")	-	0	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	0	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	0	-
Fig. 5.5 A of IS 15500 : PART 5 (2021)("Cylinder Caps-VLOM 65 (for SDWP and EDWP)")	-	0	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	0	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	0	-
Fig. 5.5 A of IS 15500 : PART 5 (2021)("Cylinder Caps-VLOM 65 (for SDWP and EDWP)")	-	0	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	0	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	0	-
Fig. 5.4 of IS 15500 : PART 5 (2021)("Reducer Cap (for SDWP, EDWP and FLP)")	-	0	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	0	-
Fig. 5.4 of IS 15500 : PART 5 (2021)("Reducer Cap (for SDWP, EDWP and FLP)")	-	0	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	0	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	0	-
Fig. 5.4 of IS 15500 : PART 5 (2021)("Reducer Cap (for SDWP, EDWP and FLP)")	-	0	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	0	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	0	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	0	-
Fig. 5.4 of IS 15500 : PART 5 (2021)("Reducer Cap (for SDWP, EDWP and FLP)")	-	0	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	0	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	0	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	0	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	0	-
Fig. 5.3 of IS 15500 : PART 5 (2021)(Cylinder Body-VLOM 50)	-	0	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	0	-
Fig. 5.3 of IS 15500 : PART 5 (2021)(Cylinder Body-VLOM 50)	-	0	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	0	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	0	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	0	-
Fig. 5.2 of IS 15500 : PART 5 (2021)(Cylinder Body-Long (for EDWP and VLOM 65))	-	0	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	0	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	0	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	0	-
Fig. 5.2 of IS 15500 : PART 5 (2021)(Cylinder Body-Long (for EDWP and VLOM 65))	-	0	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	0	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	0	-
Fig. 5.2 of IS 15500 : PART 5 (2021)(Cylinder Body-Long (for EDWP and VLOM 65))	-	0	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	0	-
3 of IS 15500 : PART 8 (2021)(CONSTRUCTION)	-	0	-
Fig. 5.1 of IS 15500 : PART 5 (2021)(Cylinder Body-Standard (for SDWP and FLP))	-	0	-
Fig. 5.1 of IS 15500 : PART 5 (2021)(Cylinder Body-Standard (for SDWP and FLP))	-	0	-
Fig. 5.1 of IS 15500 : PART 5 (2021)(DEEPWELL HANDPUMPS, COMPONENTS AND SPECIAL TOOLS — SPECIFICATION PART 5 CAST IRON COMPONENTS)	-	0	-
3.3.2 of IS 15500 : PART 2 (2021)(Other Components)	-	0	-
3.4 of IS 15500 : PART 4 (2021)("The flanges shall be reasonably flat to provide proper matching of the holes to ensure unrestricted insertion of the bolts when assembled with counterpart.")	-	0	-
3.3.2 of IS 15500 : PART 2 (2021)(Other Components)	-	0	-
3.3.1 of IS 15500 : PART 2 (2021)(Head and Cylinder Assemblies)	-	0	-
3 of IS 15500 : PART 2 (2021)(TESTING)	-	0	-
2.2 of IS 15500 : PART 2 (2021)("2.2 The material and dimensions of the individual component shall meet the requirements given in the related part of this standard.")	-	0	-
2.1 of IS 15500 : PART 2 (2021)("The assembly detail of different types of handpumps covered in this part shall be as given in Fig. 2.1 to 2.5.")	-	0	-
2.1 of IS 15500 : PART 2 (2021)("The assembly detail of different types of handpumps covered in this part shall be as given in Fig. 2.1 to 2.5.")	-	0	-
2.1 of IS 15500 : PART 2 (2021)("The assembly detail of different types of handpumps covered in this part shall be as given in Fig. 2.1 to 2.5.")	-	0	-
2.1 of IS 15500 : PART 2 (2021)("The assembly detail of different types of handpumps covered in this part shall be as given in Fig. 2.1 to 2.5.")	-	0	-
2.1 of IS 15500 : PART 2 (2021)("The assembly detail of different types of handpumps covered in this part shall be as given in Fig. 2.1 to 2.5.")	-	0	-
2 of IS 15500 : PART 2 (2021)(CONSTRUCTION)	-	0	-
3.3.4 of IS 15500 : PART 3 (2021)(" Valve Assemblies ")	-	0	-
3.3.3 of IS 15500 : PART 3 (2021)("Cylinder Assembly ")	-	0	-
3.3.2 of IS 15500 : PART 3 (2021)("Handle Assembly ")	-	0	-
3.3.1 of IS 15500 : PART 3 (2021)(Head Assembly)	-	0	-
3 of IS 15500 : PART 3 (2021)(TESTING)	-	0	-
2.2 of IS 15500 : PART 3 (2021)("2.2 The material and dimensions of the individual component shall meet the requirements given in the related part of this standard.")	-	0	-
2.1 of IS 15500 : PART 3 (2021)("The assembly details of different handpump subassemblies covered in this part shall be as given in Fig. 3.1 to 3.14.")	-	0	-
2.1 of IS 15500 : PART 3 (2021)("The assembly details of different handpump subassemblies covered in this part shall be as given in Fig. 3.1 to 3.14.")	-	0	-
2.1 of IS 15500 : PART 3 (2021)("The assembly details of different handpump subassemblies covered in this part shall be as given in Fig. 3.1 to 3.14.")	-	0	-
2.1 of IS 15500 : PART 3 (2021)("The assembly details of different handpump subassemblies covered in this part shall be as given in Fig. 3.1 to 3.14.")	-	0	-
2.1 of IS 15500 : PART 3 (2021)("The assembly details of different handpump subassemblies covered in this part shall be as given in Fig. 3.1 to 3.14.")	-	0	-
2.1 of IS 15500 : PART 3 (2021)("The assembly details of different handpump subassemblies covered in this part shall be as given in Fig. 3.1 to 3.14.")	-	0	-
2.1 of IS 15500 : PART 3 (2021)("The assembly details of different handpump subassemblies covered in this part shall be as given in Fig. 3.1 to 3.14.")	-	0	-
2.1 of IS 15500 : PART 3 (2021)("The assembly details of different handpump subassemblies covered in this part shall be as given in Fig. 3.1 to 3.14.")	-	0	-
2.1 of IS 15500 : PART 3 (2021)("The assembly details of different handpump subassemblies covered in this part shall be as given in Fig. 3.1 to 3.14.")	-	0	-
2.1 of IS 15500 : PART 3 (2021)("The assembly details of different handpump subassemblies covered in this part shall be as given in Fig. 3.1 to 3.14.")	-	0	-
2.1 of IS 15500 : PART 3 (2021)("The assembly details of different handpump subassemblies covered in this part shall be as given in Fig. 3.1 to 3.14.")	-	0	-
2.1 of IS 15500 : PART 3 (2021)("The assembly details of different handpump subassemblies covered in this part shall be as given in Fig. 3.1 to 3.14.")	-	0	-
2.1 of IS 15500 : PART 3 (2021)("The assembly details of different handpump subassemblies covered in this part shall be as given in Fig. 3.1 to 3.14.")	-	0	-
2.1 of IS 15500 : PART 3 (2021)("The assembly details of different handpump subassemblies covered in this part shall be as given in Fig. 3.1 to 3.14.")	-	0	-
2 of IS 15500 : PART 3 (2021)(CONSTRUCTION)	-	0	-
Fig. 6.13 of IS 15500 : PART 6 (2021)(Check Valve Seat-VLOM 65)	-	0	-
Fig. 6.13 of IS 15500 : PART 6 (2021)(Check Valve Seat-VLOM 65)	-	0	-
Fig. 6.12 of IS 15500 : PART 6 (2021)("Check Valve Seat-Standard (for SDWP & EDWP)")	-	0	-
3.5 of IS 15500 : PART 4 (2021)("The connecting rods/plunger rods shall be examined for straightness and formation of threads.")	-	0	-
Fig. 6.11 of IS 15500 : PART 6 (2021)("Rubber Seat Retainer (for SDWP, EDWP & FLP)")	-	0	-
Fig. 6.11 of IS 15500 : PART 6 (2021)("Rubber Seat Retainer (for SDWP, EDWP & FLP)")	-	0	-
Fig. 6.9 of IS 15500 : PART 6 (2021)(" Check Valve-Standard (for SDWP, EDWP and FLP)")	-	0	-
3.4 of IS 15500 : PART 4 (2021)("The flanges shall be reasonably flat to provide proper matching of the holes to ensure unrestricted insertion of the bolts when assembled with counterpart.")	-	0	-
5.3.7.2 of IS 15500 : PART 8 (2021)(" A similar test shall be done on the connecting rod vice by using 12 mm diameter drawn bar and a load of 200 kgf. There shall be no slippage of the bar.")	-	0	-
Fig. 6.7 of IS 15500 : PART 6 (2021)(Follower-EDW)	-	0	-
3 of IS 15500 : PART 4 (2021)(TESTING)	-	0	-
Fig. 6.7 of IS 15500 : PART 6 (2021)(Follower-EDW)	-	0	-
Fig. 6.6 of IS 15500 : PART 6 (2021)(Follower (SDWP and FLP))	-	0	-
2.4 of IS 15500 : PART 4 (2021)("Stainless Steel top connecting rod shall be as given in Fig. 4.21B")	-	0	-
Fig. 6.6 of IS 15500 : PART 6 (2021)(Follower (SDWP and FLP))	-	0	-
2.3 of IS 15500 : PART 4 (2021)("The steel components shall be given anti-corrosive treatment as mentioned in 6 of Part 1. in Fig. 4.21B")	-	0	-
2.2 of IS 15500 : PART 4 (2021)("2.2 The material and dimensions of the individual component shall meet the requirements given in the related part of this standard.")	-	0	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	0	-
Fig. 6.5 of IS 15500 : PART 6 (2021)("Bucket Spacer-Lower (for EDWP)")	-	0	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	0	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	0	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	0	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	0	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	0	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	0	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	0	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	0	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	0	-
Fig. 6.5 of IS 15500 : PART 6 (2021)("Bucket Spacer-Lower (for EDWP)")	-	0	-
Fig. 6.5 of IS 15500 : PART 6 (2021)("Bucket Spacer-Lower (for EDWP)")	-	0	-
Fig. 6.5 of IS 15500 : PART 6 (2021)("Bucket Spacer-Lower (for EDWP)")	-	0	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	0	-
Fig. 6.5 of IS 15500 : PART 6 (2021)("Bucket Spacer-Lower (for EDWP)")	-	0	-
Fig. 6.4 of IS 15500 : PART 6 (2021)(" Bucket Spacer-Standard (for SDWP, EDWP, VLOM 65 and FLP)")	-	0	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	0	-
Fig. 6.4 of IS 15500 : PART 6 (2021)(" Bucket Spacer-Standard (for SDWP, EDWP, VLOM 65 and FLP)")	-	0	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	0	-
Fig. 6.4 of IS 15500 : PART 6 (2021)(" Bucket Spacer-Standard (for SDWP, EDWP, VLOM 65 and FLP)")	-	0	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	0	-
Fig. 6.4 of IS 15500 : PART 6 (2021)(" Bucket Spacer-Standard (for SDWP, EDWP, VLOM 65 and FLP)")	-	0	-
Fig. 6.4 of IS 15500 : PART 6 (2021)(" Bucket Spacer-Standard (for SDWP, EDWP, VLOM 65 and FLP)")	-	0	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	0	-
Fig. 6.4 of IS 15500 : PART 6 (2021)(" Bucket Spacer-Standard (for SDWP, EDWP, VLOM 65 and FLP)")	-	0	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	0	-
Fig. 6.4 of IS 15500 : PART 6 (2021)(" Bucket Spacer-Standard (for SDWP, EDWP, VLOM 65 and FLP)")	-	0	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	0	-
Fig. 6.3 of IS 15500 : PART 6 (2021)(Upper Valve (for SDWP, EDWP, VLOM 65 and FLP))	-	0	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	0	-
Fig. 6.3 of IS 15500 : PART 6 (2021)(Upper Valve (for SDWP, EDWP, VLOM 65 and FLP))	-	0	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	0	-
Fig. 6.3 of IS 15500 : PART 6 (2021)(Upper Valve (for SDWP, EDWP, VLOM 65 and FLP))	-	0	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	0	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	0	-
Fig. 6.2 of IS 15500 : PART 6 (2021)("Plunger Yoka Body (for SDWP, EDWP, VLOM 65 and FLP)")	-	0	-
Fig. 6.2 of IS 15500 : PART 6 (2021)("Plunger Yoka Body (for SDWP, EDWP, VLOM 65 and FLP)")	-	0	-
Fig. 6.2 of IS 15500 : PART 6 (2021)("Plunger Yoka Body (for SDWP, EDWP, VLOM 65 and FLP)")	-	0	-
Fig. 6.1 of IS 15500 : PART 6 (2021)(Brass Liner)	-	0	-
3.1 of IS 15500 : PART 7 (2021)("3.3 The critical dimensions and hardness of all the components selected as per 3.2 shall be checked for conformance with the relevant figures given in this part part shall be treated as a separate lot.")	-	0	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	0	-
3 of IS 15500 : PART 7 (2021)(TESTING)	-	0	-
2.2 of IS 15500 : PART 7 (2021)(" The material and dimensions shall meet the related prerequisites given in 4 and 5 of Part 1.")	-	0	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	0	-
2.1 of IS 15500 : PART 7 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 7.1 to 7.18.")	-	0	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	0	-
2.1 of IS 15500 : PART 7 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 7.1 to 7.18.")	-	0	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	0	-
2.1 of IS 15500 : PART 7 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 7.1 to 7.18.")	-	0	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	0	-
2.1 of IS 15500 : PART 7 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 7.1 to 7.18.")	-	0	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	0	-
2.1 of IS 15500 : PART 7 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 7.1 to 7.18.")	-	0	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	0	-
2.1 of IS 15500 : PART 7 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 7.1 to 7.18.")	-	0	-
2.1 of IS 15500 : PART 7 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 7.1 to 7.18.")	-	0	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	0	-
2.1 of IS 15500 : PART 7 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 7.1 to 7.18.")	-	0	-
2.1 of IS 15500 : PART 7 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 7.1 to 7.18.")	-	0	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	0	-
2.1 of IS 15500 : PART 7 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 7.1 to 7.18.")	-	0	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	0	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	0	-
2.1 of IS 15500 : PART 7 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 7.1 to 7.18.")	-	0	-
2.1 of IS 15500 : PART 7 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 7.1 to 7.18.")	-	0	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	0	-
2.1 of IS 15500 : PART 7 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 7.1 to 7.18.")	-	0	-
2.1 of IS 15500 : PART 7 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 7.1 to 7.18.")	-	0	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	0	-
2.1 of IS 15500 : PART 7 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 7.1 to 7.18.")	-	0	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	0	-
2.1 of IS 15500 : PART 7 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 7.1 to 7.18.")	-	0	-
2.1 of IS 15500 : PART 7 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 7.1 to 7.18.")	-	0	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	0	-
2.1 of IS 15500 : PART 7 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 7.1 to 7.18.")	-	0	-
2.1 of IS 15500 : PART 7 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 7.1 to 7.18.")	-	0	-
2.1 of IS 15500 : PART 4 (2021)("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-	0	-
2 of IS 15500 : PART 7 (2021)(CONSTRUCTION)	-	0	-
2 of IS 15500 : PART 4 (2021)(CONSTRUCTION)	-	0	-
Fig. 6.2 of IS 15500 : PART 5 (2021)("Plunger Yoka Body (for SDWP, EDWP, VLOM 65 and FLP)")	-	0	-
Fig. 6.1 of IS 15500 : PART 5 (2021)(Brass Liner)	-	0	-
Fig. 5.6 B of IS 15500 : PART 5 (2021)(Cylinder Caps-VLOM 50)	-	0	-
Fig. 5.6 B of IS 15500 : PART 5 (2021)(Cylinder Caps-VLOM 50)	-	0	-
Fig. 5.6 B of IS 15500 : PART 5 (2021)(Cylinder Caps-VLOM 50)	-	0	-
Fig. 5.6 B of IS 15500 : PART 5 (2021)(Cylinder Caps-VLOM 50)	-	0	-
Fig. 5.6 B of IS 15500 : PART 5 (2021)(Cylinder Caps-VLOM 50)	-	0	-
Fig. 5.6 A of IS 15500 : PART 5 (2021)(Cylinder Caps-VLOM 50)	-	0	-
5.3.7.1.1 of IS 15500 : PART 8 (2021)(Mandrel size)	-	0	-
5.3.7 of IS 15500 : PART 8 (2021)(Clamping Test)	-	0	-
5.3.6.1 of IS 15500 : PART 8 (2021)(" In case of assembly, all the components shall be dismantled and tested likewise.")	-	0	-
5.3.6 of IS 15500 : PART 8 (2021)(" Two samples out of the batch selected shall be checked for dimensional and other requirements given in respective figures.")	-	0	-
5.3.5 of IS 15500 : PART 8 (2021)(" Incase of the Connecting Rod Vice ")	-	0	-
5.3.4 of IS 15500 : PART 8 (2021)(In case of the Self-locking Clamp)	-	0	-
5.3.3 of IS 15500 : PART 8 (2021)(" The movement of the screws of the heavy duty clamp and the connecting rod vice shall be easy without undue slackness or resistance throughout the opening. Proper alignment of their jaws shall be ensured.")	-	0	-
5.3.2 of IS 15500 : PART 8 (2021)(" The base plates of the clamps and/or vice shall be reasonably flat to provide proper matching of holes to ensure unrestricted insertion of bolts when fitted on respective flanges of the handpump.")	-	0	-
5.3.1 of IS 15500 : PART 8 (2021)(" All the tools shall be examined for finish, workmanship and visual defects.")	-	0	-
5 of IS 15500 : PART 8 (2021)(TESTING)	-	0	-
4.2 of IS 15500 : PART 8 (2021)(Painting)	-	0	-
4.1 of IS 15500 : PART 8 (2021)(Electro-galvanizing)	-	0	-
4 of IS 15500 : PART 8 (2021)(ANTI-CORROSIVE TREATMENT)	-	0	-
3.3.1 of IS 15500 : PART 8 (2021)(" The hinged lid shall be provided with suitable arrangement for putting a lock.")	-	0	-
3.3 of IS 15500 : PART 8 (2021)(" The tool box shall be made of 1 mm nominal thick CRCA steel sheet (see IS 513), with the overall dimensions given below: Length 440 mm Width 320 mm Height 110 mm")	-	0	-
3.2 of IS 15500 : PART 8 (2021)("2.2 The material and dimensions of the individual component shall meet the requirements given in the related part of this standard.")	-	0	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	0	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	0	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	0	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	0	-
Fig. 5.6 A of IS 15500 : PART 5 (2021)(Cylinder Caps-VLOM 50)	-	0	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	0	-
Fig. 5.6 A of IS 15500 : PART 5 (2021)(Cylinder Caps-VLOM 50)	-	0	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	0	-
Fig. 5.6 A of IS 15500 : PART 5 (2021)(Cylinder Caps-VLOM 50)	-	0	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	0	-
Fig. 5.5 B of IS 15500 : PART 5 (2021)("Cylinder Caps-VLOM 65 (for SDWP and EDWP)")	-	0	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	0	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	0	-
Fig. 5.5 B of IS 15500 : PART 5 (2021)("Cylinder Caps-VLOM 65 (for SDWP and EDWP)")	-	0	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	0	-
Fig. 5.5 B of IS 15500 : PART 5 (2021)("Cylinder Caps-VLOM 65 (for SDWP and EDWP)")	-	0	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	0	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	0	-
Fig. 5.5 A of IS 15500 : PART 5 (2021)("Cylinder Caps-VLOM 65 (for SDWP and EDWP)")	-	0	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	0	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	0	-
Fig. 5.5 A of IS 15500 : PART 5 (2021)("Cylinder Caps-VLOM 65 (for SDWP and EDWP)")	-	0	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	0	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	0	-
Fig. 5.4 of IS 15500 : PART 5 (2021)("Reducer Cap (for SDWP, EDWP and FLP)")	-	0	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	0	-
Fig. 5.4 of IS 15500 : PART 5 (2021)("Reducer Cap (for SDWP, EDWP and FLP)")	-	0	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	0	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	0	-
Fig. 5.4 of IS 15500 : PART 5 (2021)("Reducer Cap (for SDWP, EDWP and FLP)")	-	0	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	0	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	0	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	0	-
Fig. 5.4 of IS 15500 : PART 5 (2021)("Reducer Cap (for SDWP, EDWP and FLP)")	-	0	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	0	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	0	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	0	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	0	-
Fig. 5.3 of IS 15500 : PART 5 (2021)(Cylinder Body-VLOM 50)	-	0	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	0	-
Fig. 5.3 of IS 15500 : PART 5 (2021)(Cylinder Body-VLOM 50)	-	0	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	0	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	0	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	0	-
Fig. 5.2 of IS 15500 : PART 5 (2021)(Cylinder Body-Long (for EDWP and VLOM 65))	-	0	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	0	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	0	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	0	-
Fig. 5.2 of IS 15500 : PART 5 (2021)(Cylinder Body-Long (for EDWP and VLOM 65))	-	0	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	0	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	0	-
Fig. 5.2 of IS 15500 : PART 5 (2021)(Cylinder Body-Long (for EDWP and VLOM 65))	-	0	-
3.1 of IS 15500 : PART 8 (2021)(" The constructional details of different tools covered in this part shall be as given in Fig. 8.1.1 to 8.1.10, Fig. 8.2.1 to 8.2.8 and Fig. 8.3.1 to 8.3.7.")	-	0	-
3 of IS 15500 : PART 8 (2021)(CONSTRUCTION)	-	0	-
Fig. 5.1 of IS 15500 : PART 5 (2021)(Cylinder Body-Standard (for SDWP and FLP))	-	0	-
Fig. 5.1 of IS 15500 : PART 5 (2021)(Cylinder Body-Standard (for SDWP and FLP))	-	0	-
Fig. 5.1 of IS 15500 : PART 5 (2021)(DEEPWELL HANDPUMPS, COMPONENTS AND SPECIAL TOOLS — SPECIFICATION PART 5 CAST IRON COMPONENTS)	-	0	-
3.4 of IS 15500 : PART 4 (2021)("The flanges shall be reasonably flat to provide proper matching of the holes to ensure unrestricted insertion of the bolts when assembled with counterpart.")	-	0	-

19 Apr, 2028

-
Included w.e.f 07.05.2025

IS 1726 (1991)

Cast iron manhole covers and frames - Specification (Third Revision)

8900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(GRADES )	-	200	-
3(TYPES)	-	200	-
5.1.1(Covers and Frames)	-	200	-
5.1.2(Covers and Frames)	-	200	-
5.1.2(The rise of the chequer)	-	200	-
5.2(Key Holes and Keys)	-	200	-
5.2 and Fig.1 (Key Holes and Keys)	-	200	-
5.2 and Fig.1 (Key Holes and Keys)	-	200	-
5.2 and Fig.1 (Key Holes and Keys)	-	200	-
5.2 and Fig.1 (Key Holes and Keys)	-	200	-
5.2 and Fig.1 (Key Holes and Keys)	-	200	-
5.2 and Fig.1 (Key Holes and Keys)	-	200	-
5.2 and Fig.1 (Key Holes and Keys)	-	200	-
5.2 and Fig.1 (Key Holes and Keys)	-	200	-
5.2 and Fig.1 (Key Holes and Keys)	-	200	-
5.2 and Fig.1 (Key Holes and Keys)	-	200	-
5.2 and Fig.1 (Key Holes and Keys)	-	200	-
5.2 and Fig.1 (Key Holes and Keys)	-	200	-
5.2 and Fig.1 (Key Holes and Keys)	-	200	-
5.2 and Fig.1 (Key Holes and Keys)	-	200	-
5.2 and Fig.1 (Key Holes and Keys)	-	200	-
5.2 and Fig.1 (Key Holes and Keys)	-	200	-
5.2 and Fig.1 (Key Holes and Keys)	-	200	-
5.2 and Fig.1 (Key Holes and Keys)	-	200	-
5.2 and Fig.1 (Key Holes and Keys)	-	200	-
5.2 and Fig.1 (Key Holes and Keys)	-	200	-
5.2 and Fig.1 (Key Holes and Keys)	-	200	-
5.2 and Fig.2(Key Holes and Keys )	-	200	-
5.2 and Fig.2(Key Holes and Keys )	-	200	-
5.2 and Fig.2(Key Holes and Keys )	-	200	-
5.2 and Fig.2(Key Holes and Keys )	-	200	-
5.2 and Fig.2(Key Holes and Keys )	-	200	-
5.2 and Fig.2(Key Holes and Keys )	-	200	-
5.3(Locking Devices)	-	0	-
6 and Table 1(PERFORMANCE REQUIREMENTS - Clear opening of frame O X O1)	-	200	-
6 and Table 1(PERFORMANCE REQUIREMENTS - fd)	-	200	-
6 and Table 1(PERFORMANCE REQUIREMENTS - S)	-	200	-
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - O)	-	200	-
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - O1)	-	200	-
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - F)	-	200	-
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - F1)	-	200	-
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - f)	-	200	-
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - f1)	-	200	-
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - Fd)	-	200	-
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - fd)	-	200	-
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - S)	-	200	-
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - t)	-	200	-
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - t1)	-	200	-
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - C)	-	200	-
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - C1)	-	200	-
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - T)	-	200	-
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - T1)	-	200	-
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - Clearence (C1))	-	200	-
8(COATING - At 63˚C)	-	800	-
8(COATING - At 0˚C)	-	800	-
10 and Table 3(LOAD TEST)	-	2500	-
3(GRADES )	-	0	-
3(TYPES)	-	0	-
5.1.1(Covers and Frames)	-	0	-
5.1.2(Covers and Frames)	-	0	-
5.1.2(The rise of the chequer)	-	0	-
5.2(Key Holes and Keys)	-	0	-
5.2 and Fig.1 (Key Holes and Keys)	-	0	-
5.2 and Fig.1 (Key Holes and Keys)	-	0	-
5.2 and Fig.1 (Key Holes and Keys)	-	0	-
5.2 and Fig.1 (Key Holes and Keys)	-	0	-
5.2 and Fig.1 (Key Holes and Keys)	-	0	-
5.2 and Fig.1 (Key Holes and Keys)	-	0	-
5.2 and Fig.1 (Key Holes and Keys)	-	0	-
5.2 and Fig.1 (Key Holes and Keys)	-	0	-
5.2 and Fig.1 (Key Holes and Keys)	-	0	-
5.2 and Fig.1 (Key Holes and Keys)	-	0	-
5.2 and Fig.1 (Key Holes and Keys)	-	0	-
5.2 and Fig.1 (Key Holes and Keys)	-	0	-
5.2 and Fig.1 (Key Holes and Keys)	-	0	-
5.2 and Fig.1 (Key Holes and Keys)	-	0	-
5.2 and Fig.1 (Key Holes and Keys)	-	0	-
5.2 and Fig.1 (Key Holes and Keys)	-	0	-
5.2 and Fig.1 (Key Holes and Keys)	-	0	-
5.2 and Fig.1 (Key Holes and Keys)	-	0	-
5.2 and Fig.1 (Key Holes and Keys)	-	0	-
5.2 and Fig.1 (Key Holes and Keys)	-	0	-
5.2 and Fig.1 (Key Holes and Keys)	-	0	-
5.2 and Fig.2(Key Holes and Keys )	-	0	-
5.2 and Fig.2(Key Holes and Keys )	-	0	-
5.2 and Fig.2(Key Holes and Keys )	-	0	-
5.2 and Fig.2(Key Holes and Keys )	-	0	-
5.2 and Fig.2(Key Holes and Keys )	-	0	-
5.2 and Fig.2(Key Holes and Keys )	-	0	-
5.3(Locking Devices)	-	0	-
6 and Table 1(PERFORMANCE REQUIREMENTS - Clear opening of frame O X O1)	-	0	-
6 and Table 1(PERFORMANCE REQUIREMENTS - fd)	-	0	-
6 and Table 1(PERFORMANCE REQUIREMENTS - S)	-	0	-
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - O)	-	0	-
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - O1)	-	0	-
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - F)	-	0	-
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - F1)	-	0	-
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - f)	-	0	-
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - f1)	-	0	-
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - Fd)	-	0	-
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - fd)	-	0	-
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - S)	-	0	-
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - t)	-	0	-
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - t1)	-	0	-
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - C)	-	0	-
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - C1)	-	0	-
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - T)	-	0	-
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - T1)	-	0	-
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - Clearence (C1))	-	0	-
8(COATING - At 63˚C)	-	0	-
8(COATING - At 0˚C)	-	0	-
10 and Table 3(LOAD TEST)	-	0	-

19 Apr, 2028

-
Included w.e.f 07.05.2025

IS 2185 : Part 3 (1984)

Concrete Masonry Units Part 3 Autoclaved Cellular Aerated Concrete Blocks

9650 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8(Physical requirments)	-	0	given for each test
8.2(Physical requirments-Dimensions-Length)	-	400	-
8.2(Physical requirments-Dimensions-Height)	-	400	-
8.2(Physical requirments-Dimensions-Width)	-	400	-
8.3(Physical requirments- Block density)	-	500	-
8.4(Physical requirments- Compressive strength)	-	3300	-
8.5(Thermal Conductivity)	-	0	-
8.6( Drying Shrinkage )	-	2600	-
8.4, 9.2 & 11.3(Indivisual Moisture Content)	-	300	-
8.4, 9.2 & 11.3(Indivisual Bulk density)	-	300	-
8.4, 9.2 & 11.3 & Table 1(Indivisual Compressive strength)	-	500	-
8.3 & 9.1(Indivisual Moisture Content)	-	0	already given above
8.3 & 9.1 Table 1(Indivisual Block Density)	-	0	already given above
3.2 & 8.2(Indivisual Height)	-	50	-
3.2 & 8.2(Indivisual Width)	-	50	-
3.2 & 8.2(Indivisual Length)	-	50	-
8.6, 9.4 & 11.5(Grade)	-	100	-
3.4(Special Faces)	-	100	-
3.3(Faces & Arises)	-	100	-
3.1(Shape)	-	100	-
8.1.1(General (Exposed wall construction))	-	200	-
5(MATERIALS)	-	0	-
7(SURFACE TEXTURE AND FINISH)	-	100	-
9.3(Thermal Conductivity)	-	0	-
15(Marking)	-	100	-
8(Physical requirments)	-	0	-
8.2(Physical requirments-Dimensions-Length)	-	0	-
8.2(Physical requirments-Dimensions-Height)	-	0	-
8.2(Physical requirments-Dimensions-Width)	-	0	-
8.3(Physical requirments- Block density)	-	0	-
8.4(Physical requirments- Compressive strength)	-	0	-
8.5(Thermal Conductivity)	-	0	-
8.6( Drying Shrinkage )	-	0	-
8.4, 9.2 & 11.3(Indivisual Moisture Content)	-	0	-
8.4, 9.2 & 11.3(Indivisual Bulk density)	-	0	-
8.4, 9.2 & 11.3 & Table 1(Indivisual Compressive strength)	-	0	-
8.3 & 9.1(Indivisual Moisture Content)	-	0	-
8.3 & 9.1 Table 1(Indivisual Block Density)	-	0	-
3.2 & 8.2(Indivisual Height)	-	0	-
3.2 & 8.2(Indivisual Width)	-	0	-
3.2 & 8.2(Indivisual Length)	-	0	-
8.6, 9.4 & 11.5(Grade)	-	0	-
3.4(Special Faces)	-	0	-
3.3(Faces & Arises)	-	0	-
3.1(Shape)	-	0	-
8.1.1(General (Exposed wall construction))	-	0	-
5(MATERIALS)	-	0	-
7(SURFACE TEXTURE AND FINISH)	-	0	-
9.3(Thermal Conductivity)	-	0	-
15(Marking)	-	0	-
8(Physical requirments)	-	0	-
8.2(Physical requirments-Dimensions-Length)	-	0	-
8.2(Physical requirments-Dimensions-Height)	-	0	-
8.2(Physical requirments-Dimensions-Width)	-	0	-
8.3(Physical requirments- Block density)	-	0	-
8.4(Physical requirments- Compressive strength)	-	0	-
8.5(Thermal Conductivity)	-	0	-
8.6( Drying Shrinkage )	-	0	-
8.4, 9.2 & 11.3(Indivisual Moisture Content)	-	0	-
8.4, 9.2 & 11.3(Indivisual Bulk density)	-	0	-
8.4, 9.2 & 11.3 & Table 1(Indivisual Compressive strength)	-	0	-
8.3 & 9.1(Indivisual Moisture Content)	-	0	-
8.3 & 9.1 Table 1(Indivisual Block Density)	-	0	-
3.2 & 8.2(Indivisual Height)	-	0	-
3.2 & 8.2(Indivisual Width)	-	0	-
3.2 & 8.2(Indivisual Length)	-	0	-
8.6, 9.4 & 11.5(Grade)	-	0	-
3.4(Special Faces)	-	0	-
3.3(Faces & Arises)	-	0	-
3.1(Shape)	-	0	-
8.1.1(General (Exposed wall construction))	-	0	-
5(MATERIALS)	-	0	-
7(SURFACE TEXTURE AND FINISH)	-	0	-
9.3(Thermal Conductivity)	-	0	-
15(Marking)	-	0	-
8(Physical requirments)	-	0	-
8.2(Physical requirments-Dimensions-Length)	-	0	-
8.2(Physical requirments-Dimensions-Height)	-	0	-
8.2(Physical requirments-Dimensions-Width)	-	0	-
8.3(Physical requirments- Block density)	-	0	-
8.4(Physical requirments- Compressive strength)	-	0	-
8.5(Thermal Conductivity)	-	0	-
8.6( Drying Shrinkage )	-	0	-
8.4, 9.2 & 11.3(Indivisual Moisture Content)	-	0	-
8.4, 9.2 & 11.3(Indivisual Bulk density)	-	0	-
8.4, 9.2 & 11.3 & Table 1(Indivisual Compressive strength)	-	0	-
8.3 & 9.1(Indivisual Moisture Content)	-	0	-
8.3 & 9.1 Table 1(Indivisual Block Density)	-	0	-
3.2 & 8.2(Indivisual Height)	-	0	-
3.2 & 8.2(Indivisual Width)	-	0	-
3.2 & 8.2(Indivisual Length)	-	0	-
8.6, 9.4 & 11.5(Grade)	-	0	-
3.4(Special Faces)	-	0	-
3.3(Faces & Arises)	-	0	-
3.1(Shape)	-	0	-
8.1.1(General (Exposed wall construction))	-	0	-
5(MATERIALS)	-	0	-
7(SURFACE TEXTURE AND FINISH)	-	0	-
9.3(Thermal Conductivity)	-	0	-
15(Marking)	-	0	-

19 Apr, 2028

-
Included w.e.f 24.04.2025

IS 15961 (2012)

Hot dip aluminium - Zinc alloy metallic coated steel strip and sheet (Plain)

11900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(UTM)	-	0	Individual test price given below
Cl 9 & Table 2(Workmanship)	-	100	-
Cl 10(Coating Adhesion )	-	200	-
Cl 11(Workmanship)	-	0	-
Cl 12(Weight)	-	100	-
Cl 13(Length, Width, Thickness, Camber, Deviation From Squareness & Deviation From Flatness)	-	300	-
Cl 8(UTM)	-	0	-
Cl 9 & Table 2(Workmanship)	-	0	-
Cl 10(Coating Adhesion )	-	0	-
Cl 11(Workmanship)	-	0	-
Cl 12(Weight)	-	0	-
Cl 13(Length, Width, Thickness, Camber, Deviation From Squareness & Deviation From Flatness)	-	0	-
Cl 8(UTM)	-	0	-
Cl 9 & Table 2(Workmanship)	-	0	-
Cl 10(Coating Adhesion )	-	0	-
Cl 11(Workmanship)	-	0	-
Cl 12(Weight)	-	0	-
Cl 13(Length, Width, Thickness, Camber, Deviation From Squareness & Deviation From Flatness)	-	0	-
Cl. 13.7(Deviation from Flatness (Steepness))	-	100	-
Cl. 13.6(Deviation from Squareness (Out of Square))	-	100	-
Cl. 13.5(Camber)	-	100	-
Cl. 13.4(Thickness)	-	100	-
Cl. 13.3(Width)	-	100	-
4, 5(CARBON)	-	400	-
4, 5(SULPHUR)	-	400	-
4, 5(PHOSPHURS)	-	400	-
4.5(MANGANESE)	-	400	-
4, 5(NITROGEN)	-	400	-
4, 5(SILICON)	-	400	-
4, 5(ALUMINIUM)	-	400	-
Cl 13(Length, Width, Thickness, Camber, Deviation From Squareness & Deviation From Flatness)	-	0	-
Cl 12(Weight)	-	0	-
Cl 11(Workmanship)	-	0	-
Cl 10(Coating Adhesion )	-	0	-
Cl 9 & Table 2(Workmanship)	-	0	-
Cl 8(UTM)	-	0	-
Cl 8(UTM)	-	0	-
Cl 9 & Table 2(Workmanship)	-	0	-
Cl 10(Coating Adhesion)	-	0	-
Cl 11(Workmanship)	-	0	-
Cl 12(Weight)	-	0	-
Cl 13(Length, Width, Thickness, Camber, Deviation From Squareness & Deviation From Flatness)	-	0	-
Clause 3.5(IS 15961)	-	0	-
Clause 8, Table 1(IS 1608 Part 1)	-	0	-
Clause 8, Table 1(IS 1608 Part 1)	-	0	-
Clause 8, Table 1(IS 1608 Part 1)	-	0	-
Clause 9(IS 15961)	-	0	-
Clause 9(IS 15961)	-	0	-
Clause 9(IS 15961)	-	0	-
Clause 9.7(IS 15961)	-	0	-
Clause 11(IS 15961)	-	0	-
Clause 12(IS 15961)	-	0	-
Clause 13.1(IS 15961)	-	0	-
Clause 13.2(IS 15961)	-	0	-
Clause 7.1(Any Instrumental Method/Chemical Method)	-	0	-
Clause 7.1(Any Instrumental Method/Chemical Method)	-	0	-
Clause 7.1(Any Instrumental Method/Chemical Method)	-	0	-
Clause 7.1(Any Instrumental Method/Chemical Method)	-	0	-
Clause 7.1(Any Instrumental Method/Chemical Method)	-	0	-
Clause 7.1(Any Instrumental Method/Chemical Method)	-	0	-
Clause 7.1(Any Instrumental Method/Chemical Method)	-	0	-
Clause 7.1(Any Instrumental Method/Chemical Method)	-	0	-
Clause 7.1(By Calculation)	-	0	-
7.1(Chemical composition %, IS 513)	-	0	-
8.0 (Table No.- 1)(Tensile Test MPa(T.S., Y.S. & El) - IS 1608)	-	0	-
9.0 (Table No.- 2)(Coating test, g/m2)	-	0	-
10.0 (Table No.-3)(Coating adhesion test)	-	0	-
11(Freedom from defects)	-	0	-
12(Mass, kg)	-	0	-
13(Dimensions, Shape and Tolerances,mm-IS/ISO 16163)	-	0	-
7.1(Chemical composition %, IS 513)	-	0	-
8.0 (Table No.- 1)(Tensile Test MPa(T.S., Y.S. & El) - IS 1608)	-	0	-
9.0 (Table No.- 2)(Coating test, g/m2)	-	0	-
10.0 (Table No.-3)(Coating adhesion test)	-	0	-
11(Freedom from defects)	-	0	-
12(Mass, kg)	-	0	-
13(Dimensions, Shape and Tolerances,mm-IS/ISO 16163)	-	0	-
7.1(Chemical composition %, IS 513)	-	0	-
8.0 (Table No.- 1)(Tensile Test MPa(T.S., Y.S. & El) - IS 1608)	-	0	-
9.0 (Table No.- 2)(Coating test, g/m2)	-	0	-
10.0 (Table No.-3)(Coating adhesion test)	-	0	-
11(Freedom from defects)	-	0	-
12(Mass, kg)	-	0	-
13(Dimensions, Shape and Tolerances,mm-IS/ISO 16163)	-	0	-
Clause 3.5(Surface Finish)	-	0	-
Clause 8, Table 1(Tensile Strength)	-	1200	-
Clause 8, Table 1(Yield Strength)	-	1200	-
Clause 8, Table 1(Elongation)	-	1200	-
Clause 9(Coating Test (Triple Spot Test) (Total Both Surface))	-	300	-
Clause 9(Coating Test (Triple Spot Test) (Total Both Surface))	-	0	-
Clause 9(Coating Test (Single Spot Test) (Total Both Surface))	-	300	-
Clause 9(Coating Test (Single Spot Test) (One Surface))	-	300	-
Clause 9.7(Differential Coating)	-	300	-
Clause 11(Freedom from Defect)	-	0	-
Clause 12(Mass)	-	0	-
Clause 13.1(Coil Internal Diameter)	-	100	-
Clause 13.2(Length Tolerance)	-	100	-
Clause 7.1(Chromium)	-	400	-
Clause 7.1(Nickel)	-	400	-
Clause 7.1(Niobium)	-	400	-
Clause 7.1(Vanadium)	-	400	-
Clause 7.1(Titanium)	-	400	-
Clause 7.1(Molybdenum)	-	400	-
Clause 7.1(Boron)	-	400	-
Clause 7.1(Calcium)	-	0	-
Clause 7.1(Chromium + Nickel + Niobium, Vanadium + Titanium + Molybdenum + Boron + Calcium)	-	100	-
Cl 8(UTM)	-	0	-
Cl 9 & Table 2(Workmanship)	-	0	-
Cl 10(Coating Adhesion )	-	0	-
Cl 11(Workmanship)	-	0	-
Cl 12(Weight)	-	0	-
Cl 13(Length, Width, Thickness, Camber, Deviation From Squareness & Deviation From Flatness)	-	0	-
Cl 8(UTM)	-	0	-
Cl 9 & Table 2(Workmanship)	-	0	-
Cl 10(Coating Adhesion )	-	0	-
Cl 11(Workmanship)	-	0	-
Cl 12(Weight)	-	0	-
Cl 13(Length, Width, Thickness, Camber, Deviation From Squareness & Deviation From Flatness)	-	0	-
Cl 8(UTM)	-	0	-
Cl 9 & Table 2(Workmanship)	-	0	-
Cl 10(Coating Adhesion )	-	0	-
Cl 11(Workmanship)	-	0	-
Cl 12(Weight)	-	0	-
Cl 13(Length, Width, Thickness, Camber, Deviation From Squareness & Deviation From Flatness)	-	0	-
Cl. 13.7(Deviation from Flatness (Steepness))	-	0	-
Cl. 13.6(Deviation from Squareness (Out of Square))	-	0	-
Cl. 13.5(Camber)	-	0	-
Cl. 13.4(Thickness)	-	0	-
Cl. 13.3(Width)	-	0	-
4, 5(CARBON)	-	0	-
4, 5(SULPHUR)	-	0	-
4, 5(PHOSPHURS)	-	0	-
4.5(MANGANESE)	-	0	-
4, 5(NITROGEN)	-	0	-
4, 5(SILICON)	-	0	-
4, 5(ALUMINIUM)	-	0	-
Cl 13(Length, Width, Thickness, Camber, Deviation From Squareness & Deviation From Flatness)	-	0	-
Cl 12(Weight)	-	0	-
Cl 11(Workmanship)	-	0	-
Cl 10(Coating Adhesion )	-	0	-
Cl 9 & Table 2(Workmanship)	-	0	-
Cl 8(UTM)	-	0	-
Cl 8(UTM)	-	0	-
Cl 9 & Table 2(Workmanship)	-	0	-
Cl 10(Coating Adhesion)	-	0	-
Cl 11(Workmanship)	-	0	-
Cl 12(Weight)	-	0	-
Cl 13(Length, Width, Thickness, Camber, Deviation From Squareness & Deviation From Flatness)	-	0	-
Clause 3.5(IS 15961)	-	0	-
Clause 8, Table 1(IS 1608 Part 1)	-	0	-
Clause 8, Table 1(IS 1608 Part 1)	-	0	-
Clause 8, Table 1(IS 1608 Part 1)	-	0	-
Clause 9(IS 15961)	-	0	-
Clause 9(IS 15961)	-	0	-
Clause 9(IS 15961)	-	0	-
Clause 9.7(IS 15961)	-	0	-
Clause 11(IS 15961)	-	0	-
Clause 12(IS 15961)	-	0	-
Clause 13.1(IS 15961)	-	0	-
Clause 13.2(IS 15961)	-	0	-
Clause 7.1(Any Instrumental Method/Chemical Method)	-	0	-
Clause 7.1(Any Instrumental Method/Chemical Method)	-	0	-
Clause 7.1(Any Instrumental Method/Chemical Method)	-	0	-
Clause 7.1(Any Instrumental Method/Chemical Method)	-	0	-
Clause 7.1(Any Instrumental Method/Chemical Method)	-	0	-
Clause 7.1(Any Instrumental Method/Chemical Method)	-	0	-
Clause 7.1(Any Instrumental Method/Chemical Method)	-	0	-
Clause 7.1(Any Instrumental Method/Chemical Method)	-	0	-
Clause 7.1(By Calculation)	-	0	-
7.1(Chemical composition %, IS 513)	-	0	-
8.0 (Table No.- 1)(Tensile Test MPa(T.S., Y.S. & El) - IS 1608)	-	0	-
9.0 (Table No.- 2)(Coating test, g/m2)	-	0	-
10.0 (Table No.-3)(Coating adhesion test)	-	0	-
11(Freedom from defects)	-	0	-
12(Mass, kg)	-	0	-
13(Dimensions, Shape and Tolerances,mm-IS/ISO 16163)	-	0	-
7.1(Chemical composition %, IS 513)	-	0	-
8.0 (Table No.- 1)(Tensile Test MPa(T.S., Y.S. & El) - IS 1608)	-	0	-
9.0 (Table No.- 2)(Coating test, g/m2)	-	0	-
10.0 (Table No.-3)(Coating adhesion test)	-	0	-
11(Freedom from defects)	-	0	-
12(Mass, kg)	-	0	-
13(Dimensions, Shape and Tolerances,mm-IS/ISO 16163)	-	0	-
7.1(Chemical composition %, IS 513)	-	0	-
8.0 (Table No.- 1)(Tensile Test MPa(T.S., Y.S. & El) - IS 1608)	-	0	-
9.0 (Table No.- 2)(Coating test, g/m2)	-	0	-
10.0 (Table No.-3)(Coating adhesion test)	-	0	-
11(Freedom from defects)	-	0	-
12(Mass, kg)	-	0	-
13(Dimensions, Shape and Tolerances,mm-IS/ISO 16163)	-	0	-
Clause 3.5(Surface Finish)	-	0	-
Clause 8, Table 1(Tensile Strength)	-	0	-
Clause 8, Table 1(Yield Strength)	-	0	-
Clause 8, Table 1(Elongation)	-	0	-
Clause 9(Coating Test (Triple Spot Test) (Total Both Surface))	-	0	-
Clause 9(Coating Test (Triple Spot Test) (Total Both Surface))	-	0	-
Clause 9(Coating Test (Single Spot Test) (Total Both Surface))	-	0	-
Clause 9(Coating Test (Single Spot Test) (One Surface))	-	0	-
Clause 9.7(Differential Coating)	-	0	-
Clause 11(Freedom from Defect)	-	0	-
Clause 12(Mass)	-	0	-
Clause 13.1(Coil Internal Diameter)	-	0	-
Clause 13.2(Length Tolerance)	-	0	-
Clause 7.1(Chromium)	-	0	-
Clause 7.1(Nickel)	-	0	-
Clause 7.1(Niobium)	-	0	-
Clause 7.1(Vanadium)	-	0	-
Clause 7.1(Titanium)	-	0	-
Clause 7.1(Molybdenum)	-	0	-
Clause 7.1(Boron)	-	0	-
Clause 7.1(Calcium)	-	0	-
Clause 7.1(Chromium + Nickel + Niobium, Vanadium + Titanium + Molybdenum + Boron + Calcium)	-	0	-

19 Apr, 2028

-
Included w.e.f 07.05.2025

Bureau of Indian Standards

The National Standards Body of India

LUCID LABORATORIES PRIVATE LIMITED, HYDERABAD

PLOT NO.3, IDA,, BALANAGAR, HYDERABAD, Medchal Malkajgiri, Telangana, 500037

9848163346 info@lucidlabsindia.com

Scope List