BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15123 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

571

EKO PRO ENGINEERS PRIVATE LIMITED (32/37) GHAZIABAD

8164006

IS 18316 (2023)

HOT ROLLED AND COLD ROLLED STEEL STRIPS INTENDED FOR PROCESSING OF SEMIFULLY PROCESSED NON-GRAIN ORIENTED ELECTRICAL STEEL OR FULLY PROCESSED GRAIN ORIENTED ELECTRICAL STEEL SPECIFICATION

All Grade

10400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 7.0(Carbon)	-	10400	-
Clause. 7.0(Silicon)	-	10400	-
Clause. 7.0(Sulphur)	-	10400	-
Clause. 7.0(Phosphorus)	-	10400	-
Clause. 7.0(Manganese)	-	10400	-
Clause. 7.0(Aluminium)	-	10400	-
Clause.8.0(Freedom From Defects)	-	10400	-
Clause.9.0(Dimensions, Shape & Tolerances (for Hot-rolled Steel))	-	10400	-
Clause.10.0(Dimensions, Shape & Tolerances (for Cold-rolled Steel))	-	10400	-

27 May, 2028

-
-

572

EKO PRO ENGINEERS PRIVATE LIMITED (32/37) GHAZIABAD

8164006

IS 1285 (2023)

WROUGHT ALUMINIUM AND ALUMINIUM ALLOYS EXTRUDED ROUND TUBE AND HOLLOW SECTIONS FOR GENERAL ENGINEERINGPURPOSES SPECIFICATION

All Designation

5900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1("The extruded round tube and hollow sections shall be sound and visually free from harmful defects. ")	-	5900	-
6.2(Slight discoloration due to heat treatment, minor polishing marks and spiral marks due to roll straightening shall not be a cause for rejection.)	-	5900	-
8("Dimensions and tolerances of the material shall be as laid down in the Indian Standards indicated below: a) Extruded round tube IS 2673; and b) Extruded hollow sections IS 6477.")	-	5900	-
9(" Extruded round tubes and hollow sections shall be made from alloys specified in IS 733. 9.2 The chemical analysis of the material shall be carried out either in accordance with the methods specified in IS 504 (Part 1 to 12) and IS 504 (Part 13 to 16) or by any other established instrumental/chemical method. In case of any dispute the method specified in relevant parts of IS 504 shall be used as referee method. However, when the method is not given in IS 504, the referee method shall be as agreed to between the purchaser and the manufacturer. ")	-	5900	-
10(Tensile test)	-	5900	-
Cl.9.1(Aluminium- IS 504 and its parts or any other intrumental/chemical methods)	-	5900	-
Cl.9.1(Copper- IS 504 and its parts or any other intrumental/chemical methods)	-	5900	-
Cl.9.1(Magnesium- IS 504 and its parts or any other intrumental/chemical methods)	-	5900	-
Cl.9.1(Silicon- IS 504 and its parts or any other intrumental/chemical methods)	-	5900	-
Cl.9.1(Iron- IS 504 and its parts or any other intrumental/chemical methods)	-	5900	-
Cl.9.1(Manganese- IS 504 and its parts or any other intrumental/chemical methods)	-	5900	-
Cl.9.1(Zinc- IS 504 and its parts or any other intrumental/chemical methods)	-	5900	-
Cl.9.1(Titanium and/ or other grain refining elements- IS 504 and its parts or any other intrumental/chemical methods)	-	5900	-
Cl.9.1(Chromium- IS 504 and its parts or any other intrumental/chemical methods)	-	5900	-
Cl.9.1(Remarks (Ti+V) - IS 504 and its parts or any other intrumental/chemical methods)	-	5900	-
Cl.9.1(Remarks (Cr+Mn) - IS 504 and its parts or any other intrumental/chemical methods)	-	5900	-
Cl.9.1(Remarks (Total Impurities)- IS 504 and its parts or any other intrumental/chemical methods)	-	5900	-

27 May, 2028

-
-

573

EKO PRO ENGINEERS PRIVATE LIMITED (32/37) GHAZIABAD

8164006

IS 15647 (2006)

Hot rolled steel narrow width strip for welded tubes and pipes

All

9900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(UTM)	-	9900	-
Cl 9(Press)	-	9900	-
Cl 11(Workmanship)	-	9900	-
Cl 12(Length, Width & Thickness)	-	9900	-
Cl 13(Workmanship)	-	9900	-
Cl 8(UTM)	-	9900	-
Cl 9(Press)	-	9900	-
Cl 11(Workmanship)	-	9900	-
Cl 12(Length, Width & Thickness)	-	9900	-
Cl 13(Workmanship)	-	9900	-
Cl 8(UTM)	-	9900	-
Cl 9(Press)	-	9900	-
Cl 11(Workmanship)	-	9900	-
Cl 12(Length, Width & Thickness)	-	9900	-
Cl 13(Workmanship)	-	9900	-
Cl. 12(Weight)	-	9900	-
Cl. 12(Edge Camber)	-	9900	-
Cl. 12(Thickness)	-	9900	-
Cl. 8.2 Table 3(Elongation)	-	9900	-
Cl. 8.2 Table 3(Yield Stress)	-	9900	-
Cl 13(Workmanship)	-	9900	-
Cl 12(Length, Width & Thickness)	-	9900	-
Cl 11(Workmanship)	-	9900	-
Cl 9(Press)	-	9900	-
Cl 8(UTM)	-	9900	-
7(Chemical Composition)	-	9900	-
Cl 8(UTM)	-	9900	-
Cl 9(Press)	-	9900	-
Cl 11(Workmanship)	-	9900	-
Cl 12(Length, Width & Thickness)	-	9900	-
Cl 13(Workmanship)	-	9900	-
7(Carbon as C - IS:228)	-	9900	-
7(Manganese as Mn-IS:228)	-	9900	-
7(Sulphur as S- IS:228)	-	9900	-
7(Phosphorus as P-IS:228)	-	9900	-
7(Aluminium -IS:228)	-	9900	-
7(Silicon as S-IS:228)	-	9900	-
7(Nitrogen content -IS:228)	-	9900	-
8(Tensile Strength-IS:1608(P1))	-	9900	-
8(Yield Strength-IS:1608(P1))	-	9900	-
8(Elongation -IS:1608(P1))	-	9900	-
12(Width-SOP MT-23)	-	9900	-
12(Thickness - SOP MT-23)	-	9900	-
12(Edge Camber-SOP MT-23)	-	9900	-
7(Carbon IS 228 (part 1) IS 8811: 1998)	-	9900	-
7(Sulphur IS 228 (part 9) IS 8811: 1998)	-	9900	-
7(Phosphorous IS 228 (part 3) IS 8811: 1998)	-	9900	-
7(Maganese IS 228 (part 2) IS 8811: 1998)	-	9900	-
7(Silicon IS 228 (part 1) IS 8811: 1998)	-	9900	-
7(Chromium IS 8811: 1998)	-	9900	-
7(Nickel IS 8811: 1998)	-	9900	-
7(Boron IS 8811: 1998)	-	9900	-
7(Titanium IS 8811: 1998)	-	9900	-
7(Niobium IS 8811: 1998)	-	9900	-
7(Vanadium IS 8811: 1998)	-	9900	-
7(Aluminium IS 8811: 1998)	-	9900	-
7(Copper IS 8811: 1998)	-	9900	-
7(Nitrogen IS 228 (part 19) IS 8811: 1998)	-	9900	-
5.2(Molybednum Astime 1086: 2014)	-	9900	-
8.0(Bend test IS 1599:1985)	-	9900	-
9.0(Bend Test IS 1599:1985)	-	9900	-
12.0(Dimention IS 1730:1989)	-	9900	-
Cl.7.1 and 7.2, Table 1(Carbon- IS 228(Part 1))	-	9900	-
Cl.7.1 and 7.2, Table 1(Sulphur- IS 228(Part 9))	-	9900	-
Cl.7.1 and 7.2, Table 1(Phosphorous- IS 228(Part 3))	-	9900	-
Cl.7.1 and 7.2, Table 1(Manganese- IS 228(Part 2))	-	9900	-
Cl.7.1 and 7.2, Table 1(Silicon- IS 228(Part 2))	-	9900	-
Cl.7.1 and 7.2, Table 1(Nitrogen -IS 228(Part 19))	-	9900	-

27 May, 2028

-
-

574

EKO PRO ENGINEERS PRIVATE LIMITED (32/37) GHAZIABAD

8164006

IS 2385 (1977)

Specification for hot - Rolled mild steel sheet and strip in coil form for cold - Reduced tinplate and cold - Reduced blackplate (First Revision)

All Grade

4000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 5.1, 5.2 & Table1(Carbon- Appropriate parts of IS 228 or any other established Instrumental/Chemical method.)	-	4000	-
Cl. 5.1, 5.2 & Table1(Manganese- Appropriate parts of IS 228 or any other established Instrumental/Chemical method.)	-	4000	-
Cl. 5.1, 5.2 & Table1(Sulphur- Appropriate parts of IS 228 or any other established Instrumental/Chemical method.)	-	4000	-
Cl. 5.1, 5.2 & Table1(Phosphorus- Appropriate parts of IS 228 or any other established Instrumental/Chemical method.)	-	4000	-
Cl. 5.1, 5.2 & Table1(Nitrogen- Appropriate parts of IS 228 or any other established Instrumental/Chemical method.)	-	4000	-
Cl. 5.1, 5.2 & Table1(Aluminium- Appropriate parts of IS 228 or any other established Instrumental/Chemical method.)	-	4000	-
6(Freedom from defects)	-	4000	-
8(Dimensions and Tolerances)	-	4000	-
Cl. 5.1, 5.2(chromium)	-	4000	-
Cl. 5.1, 5.2(silicon)	-	4000	-
Cl. 5.1, 5.2(copper)	-	4000	-
Cl. 5.1, 5.2(aluminium)	-	4000	-
Cl. 5.1, 5.2(Nitrogen )	-	4000	-
Cl. 5.1, 5.2(Phosphorus)	-	4000	-
Cl. 5.1, 5.2(Sulphur)	-	4000	-
Cl. 5.1, 5.2(Manganese)	-	4000	-
Cl. 5.1, 5.2(carbon)	-	4000	-

27 May, 2028

-
-

575

EKO PRO ENGINEERS PRIVATE LIMITED (32/37) GHAZIABAD

8164006

IS 12406 (2021)

Medium density fibre boards for general purpose - Specification

Grade 1/Grade 2/E1/E2

8200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clauses 5.2, 9 and 10.2.2(Density)	-	8200	-
Clauses 5.2, 9 and 10.2.2(Density)	-	8200	-
Clauses 5.2, 9 and 10.2.2(Variation from mean density)	-	8200	-
Clauses 5.2, 9 and 10.2.2(Moisture Content)	-	8200	-
Clauses 5.2, 9 and 10.2.2(Variation from mean moisture content)	-	8200	-
Clauses 5.2, 9 and 10.2.2(Linear expansion (Thickness Swelling in Water) Due to general Absorption after 24h soaking)	-	8200	-
Clauses 5.2, 9 and 10.2.2(Internal Bond Strength)	-	8200	-
Clauses 5.2, 9 and 10.2.2(Internal Bond strength (i) (After Cyclic test) (ii) (After accelerated water resistance test))	-	8200	-
Clauses 5.2, 9 and 10.2.2(Modulus of Rupture a) Avg. Value b) Min. Individual)	-	8200	-
Clauses 5.2, 9 and 10.2.2(Modulus of Elasticity a) Avg. Value b) Min. Individual)	-	8200	-
Clauses 5.2, 9 and 10.2.2(Screw withdrawl strength (i) Face (ii) Edge (For thickness >12mm))	-	8200	-
Clauses 5.2, 9 and 10.2.2(Formaldehyde Content (i) For Formaldehyde Class, E1 (ii) For Formaldehyde Class, E2)	-	8200	-
8(DIMENSIONS AND TOLERANCES)	-	8200	-
Cl-11(ADDITIONAL REQUIREMENTS FOR ECO-MARK)	-	8200	-
Cl 7(Finish)	-	8200	-

27 May, 2028

-
-

576

EKO PRO ENGINEERS PRIVATE LIMITED (32/37) GHAZIABAD

8164006

IS 3087 (2025)

Medium Density Particle Boards of Wood and other Lignocellulosic Materials for General Purpose - Specification ( Third Revision )

REG -GRADE-A , REG GRADE-B , MR Grade, HMR Grade

10500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
As per Clause 7(Finish --IS 2380 (Part 2), IS 2380 (Part 3) & Visual)	-	10500	-
As per Clause 8, Table 2(Length -IS 2380 (Part 2))	-	10500	-
As per Clause 8, Table 2(Width - IS 2380 (Part 2))	-	10500	-
As per Clause 8, Table 2(Thickness, Sanded/finished panel - IS 2380 (Part 2))	-	10500	-
As per Clause 8, Table 2(Squareness, Max. - IS 2380 (Part 2))	-	10500	-
As per Clause 8, Table 2(Edge straightness, Max. -IS 2380 (Part 2))	-	10500	-
As per Clause 9.1 Table 3(Density -IS 2380 (Part 3))	-	10500	-
As per Clause 9.1 Table 3(Variation from mean density, --IS 2380 (Part 3))	-	10500	-
As per Clause 9.1 Table 3(Moisture Content -IS 2380 (Part 3))	-	10500	-
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Modulus of rupture (MoR), Min.-IS 2380 (Part 4))	-	10500	-
As per Clause 9.1 Table 4, Table 6, Table 7(Modulus of elasticity (MoE), Min. -(IS 2380 (Part 4))	-	10500	-
As per Clause 9.1 Table 4, Table 5, Table 6, Table7(Internal bond strength, Min. - IS 2380 (Part 5))	-	10500	-
As per Clause 9.1 Table 6, Table 7(24 h thickness swelling (due to general absorption) Max. - IS 2380 (Part 17))	-	10500	-
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Screw withdrawal strength (face) , Min. -IS 2380 (Part 4))	-	10500	-
As per Clause 9.1 Table 4, Table 5, table 6, Table 7(Screw withdrawal strength (edge) , Min. -IS 2380 (Part 4))	-	10500	-
As per Clause 9.1 , Table 6, Table 7(Moisture Resistance : Option 1 : Cyclic test (1. )Internal bond strength Min. -IS 2380 (Part 5) see note 1)	-	10500	-
As per Clause 9.1 , Table 6, Table 7(Moisture Resistance : Option 2 : Boil test (1.) Internal bond strength , Min.- IS 2380 (Part 5) see note 2)	-	10500	-
As per Clause 9.1 , Table 9(Formaldehyde content Fc, mg/100 g for oven dry board -IS 13745)	-	10500	-

27 May, 2028

-
-

577

EKO PRO ENGINEERS PRIVATE LIMITED (32/37) GHAZIABAD

8164006

IS 4923 (2017)

Hollow steel sections for structural use - Specification (Third Revision)

All Grade

6800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.7.1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	6800	-
Cl.7.1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	6800	-
Cl.7.1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	6800	-
Cl.7.1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	6800	-
Cl.7.1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	6800	-
Cl.7.1(Aluminium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	6800	-
Cl.7.1(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	6800	-
Cl.7.1(Niobium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	6800	-
Cl.7.1(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	6800	-
Cl.7.1(Titanium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	6800	-
Cl.7.1(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	6800	-
Cl.7.1(Carbon Equivalent-IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	6800	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Depth))	-	6800	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Width))	-	6800	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Thickness))	-	6800	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Weigth))	-	6800	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Area of Section))	-	6800	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia))	-	6800	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia about X-X))	-	6800	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia about Y-Y))	-	6800	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Radius of Gyration))	-	6800	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Radius of Gyration about X-X))	-	6800	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Radius of Gyration about Y-Y))	-	6800	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Elastic Modulus))	-	6800	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Elastic Modulus about X-X))	-	6800	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Elastic Modulus about Y-Y))	-	6800	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Plastic Modulus))	-	6800	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Plastic Modulus about X-X))	-	6800	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Plastic Modulus about Y-Y))	-	6800	-
Cl. 10.1, 14.1, 18.1(Straightness)	-	6800	-
Cl. 10.2, Fig 1(Outside dimension (B))	-	6800	-
Cl. 10.2, Fig 1(Outside dimension (H))	-	6800	-
Cl. 10.2, Fig 1(Outside dimension (T))	-	6800	-
Cl. 10.4, Fig 2(Concavity, X1)	-	6800	-
Cl. 10.4, Fig 2(Convexity, X2)	-	6800	-
Cl. 10.5, Fig 3(Squareness of side)	-	6800	-
Cl. 10.6, Fig 4(External Corner Radius)	-	6800	-
Cl. 10.7, Fig 5(Total twist, V)	-	6800	-
Cl. 15.2, Table 3(Tensile Strength- IS 1608)	-	6800	-
Cl. 15.2, Table 3(Yield Strength- IS 1608)	-	6800	-
Cl. 15.2, Table 3(Elongation- IS 1608)	-	6800	-
Cl. 14.1(Exact Length)	-	6800	-
Cl. 14.1(Random Length)	-	6800	-
Cl. 14.1(Weight on individual length)	-	6800	-
Cl. 14.1(Weight on lots of 10 tonnes min)	-	6800	-
Cl. 18, Note 2(Internal Fin Height (Only for Cold Formed))	-	6800	-
7(Micro Alloying elements(Nb+V+Ti))	-	6800	-
7(Carbon equivalent as CE)	-	6800	-
10.4(Concavity/Convexity-SOP MT-23)	-	6800	-
10.5(Squareness of corner/Sides-SOP MT-23)	-	6800	-
10.6("External corner Radius/ Radii of corners-outside - SOP MT-23")	-	6800	-
11(Oiling & Painting - IS 4923)	-	6800	-
18.1(Height of the internal weld fin - IS 4923)	-	6800	-
10.3(Thickness - IS 4923)	-	6800	-
13(Marking)	-	6800	-
Cl-19(Mechanical Tests)	-	6800	-

27 May, 2028

-
-

578

EKO PRO ENGINEERS PRIVATE LIMITED (32/37) GHAZIABAD

8164006

IS 12817 (2020)

Stainless Steel Butt Hinges - Specification ( Third Revision )

All Type

9800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.2, Table 1 to 6(Length , A -IS 12817)	-	9800	-
6.2, Table 1 to 6(Breadth, B-IS 12817)	-	9800	-
6.2, Table 1 to 6(Breadth, B1-IS 12817)	-	9800	-
6.2, Table 1 to 6(Breadth, B2-IS 12817)	-	9800	-
6.2, Table 1 to 6(Thickness of flap, C-IS 12817)	-	9800	-
6.2, Table 1 to 6(Dia. of Hinge pin, D-IS 12817 )	-	9800	-
6.2, Table 1 to 6(Number of Knuckles- IS 12817 )	-	9800	-
6.2, Table 1 to 6(Number of Screw Holes -IS 12817 )	-	9800	-
6.2, Table 1 to 6(Holes for Screw Number- IS 12817 )	-	9800	-
7.1(General - IS 12817 )	-	9800	-
7.2(Knuckles - IS 12817 )	-	9800	-
7.3(Pins- IS 12817 )	-	9800	-
7.4(Screw Holes- IS 12817 )	-	9800	-
7.4.2(Position of screw holes - IS 12817 )	-	9800	-
7.4.2, Fig 1(The distance of the screw holes from the end of the flap - IS 12817 )	-	9800	-
8.0(Finish - IS 12817 )	-	9800	-
Clause 4.1.2(Silicon (Pin) )	-	9800	-
Clause 4.1.2(Phosphorus (Pin) )	-	9800	-
Clause 4.1.2(Sulphur (Pin) )	-	9800	-
Clause 4.1.2(Manganese (Pin) )	-	9800	-
Clause 4.1.2(Carbon (Pin) )	-	9800	-
Clause 4.1.1(Silicon (Flap) )	-	9800	-
Clause 4.1.1(Phosphorus (Flap) )	-	9800	-
Clause 4.1.1(Sulphur (Flap) )	-	9800	-
Clause 4.1.1(Manganese (Flap) )	-	9800	-
Clause 4.1.1(Carbon (Flap) )	-	9800	-
Clause 7.4.2 (Dimension - Z )	-	9800	-
Clause 7.4.2 (Dimension - Y )	-	9800	-
Clause 7.4.2 (Dimension - X )	-	9800	-
Clause 7.4.1(Number of holes)	-	9800	-
As per Cl.4(Carbon)	-	9800	-
As per Cl.4(Sulphur)	-	9800	-
As per Cl.4(Phosphorus)	-	9800	-
As per Cl.4(Manganese)	-	9800	-
As per Cl.4(Nitrogen)	-	9800	-
As per Cl.4(Silicon)	-	9800	-
As per Cl.4(Aluminium)	-	9800	-
As per Cl.4(Chromium)	-	9800	-
As per Cl.4(Vanadium)	-	9800	-
As per Cl.4(Molybdenum)	-	9800	-
As per Cl.4(Niobium)	-	9800	-
As per Cl.4(Nickel)	-	9800	-
As per Cl.4(Copper)	-	9800	-
As per Cl.4(Titanium)	-	9800	-
As per Cl.4(Zirconium)	-	9800	-
As per Cl.4(Tungsten)	-	9800	-
As per Cl.4(Cerium)	-	9800	-
Cl.4(Other Elements - IS 228 and its parts or any other intrumental/chemical methods)	-	9800	-

27 May, 2028

-
-

579

EKO PRO ENGINEERS PRIVATE LIMITED (32/37) GHAZIABAD

8164006

IS 432 : Part 1 (1982)

Mild Steel and Medium Tensile Steel Bars and Hard-Drawn Steel Wire for Concrete Reinforcement: Part 1 Mild Steel and Medium Tensile Steel Bars

All Designation

2490 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.1(Workmanship)	-	2490	-
Cl 6.2(Diameter & Ovality)	-	2490	-
Cl 6.2(Weight)	-	2490	-
Cl 8.2(Bend test)	-	2490	-
Cl 9.3(Press)	-	2490	-
Cl 5.1(Workmanship)	-	2490	-
Cl 6.1(Diameter)	-	2490	-
Cl 6.2(Weight)	-	2490	-
Cl 8.1(ultimate tensile stress, yield stress and percentage elongation)	-	2490	-
Cl 9.3(Press)	-	2490	-
Cl 5.1(Workmanship)	-	2490	-
Cl 6.2(Diameter & Ovality)	-	2490	-
Cl 6.2(Weight)	-	2490	-
Cl 8(Physical Requirements)	-	2490	-
Cl 9.3(Press)	-	2490	-
Clause -4, 4.3(TITANIUM)	-	2490	-
Clause -4, 4.2(VANADIUM)	-	2490	-
Clause -4, 4.1(NIOBIUM)	-	2490	-
Clause -4, 4.1(Molybdenum)	-	2490	-
Clause -4, 4.1(Chromium)	-	2490	-
Clause -4, 4.1(Nickel)	-	2490	-
Clause -4, 4.1( ALUMINIUM)	-	2490	-
Clause -4, 4.1(SILICON)	-	2490	-
Clause -4, 4.1(NITROGEN)	-	2490	-
Clause -4, 4.1(MANGANESE)	-	2490	-
Clause -4, 4.1(SULPHUR)	-	2490	-
Clause -4, 4.1( CARBON)	-	2490	-
Cl. 8.1 Table 1(Elongation)	-	2490	-
Cl. 8.1 Table 1(Yield Stress)	-	2490	-
Clause 8.1(Elongation)	-	2490	-
Clause 8.1(Yield Stress)	-	2490	-
Clause 9.3(Bend test)	-	2490	-
Clause 6.1(Size)	-	2490	-
Cl 9.3(Press)	-	2490	-
Cl 8(UTM)	-	2490	-
Cl 6.2(Weight)	-	2490	-
Cl 6.2(Diameter & Ovality)	-	2490	-
Cl 5.1(Workmanship)	-	2490	-
7(Tolerance)	-	2490	-
Cl 5.1(Workmanship)	-	2490	-
Cl 6.2(Diameter & Ovality)	-	2490	-
Cl 6.2(Weight)	-	2490	-
Cl 8(UTM)	-	2490	-
Cl 9.3(Press)	-	2490	-
Cl 4.1(Workmanship)	-	2490	-
Cl 5 & 6(Diameter)	-	2490	-
Cl 7(UTM)	-	2490	-
Cl 8.3(Bending To Both Side At 90°, Then Straight)	-	2490	-
Clause 5.1(IS 432 Part 1)	-	2490	-
Clause 6.2(IS 1732)	-	2490	-
Clause 8.1(IS 1608 Part 1)	-	2490	-
Clause 4(Any Instrumental Method/Chemical Method)	-	2490	-
Clause 4(By Calculation)	-	2490	-
Clause 4(By Calculation)	-	2490	-
Clause 4(Any Instrumental Method/Chemical Method)	-	2490	-
Clause 5.1(Freedom from Defect)	-	2490	-
Clause 6.2(Mass)	-	2490	-
Clause 8.1(Ultimate Tensile Stress)	-	2490	-
Clause 4(Boron)	-	2490	-
Clause 4(By Calculation)	-	2490	-
Clause 4(By Calculation)	-	2490	-
Clause 4(Copper)	-	2490	-
8.1 & 9.2(Yield Strength - IS: 1608 (P1))	-	2490	-
8.1 & 9.2(Elongation on SoA 5.65mm GL - IS: 1608 (P1))	-	2490	-
11(Marking)	-	2490	-
Clause 5.1(Freedom from Defect)	-	2490	-
Clause 6.2(Mass)	-	2490	-
Clause 8.1(Ultimate Tensile Stress)	-	2490	-
Clause 4(Boron)	-	2490	-
Clause 4(Carbon Equivalent)	-	2490	-
Clause 4(Ni+V+Ti)	-	2490	-
Clause 4(Copper)	-	2490	-
Clause 4(Copper)	-	2490	-
Clause -4, 4.1(PHOSPHURS)	-	2490	-

27 May, 2028

-
-

580

EKO PRO ENGINEERS PRIVATE LIMITED (32/37) GHAZIABAD

8164006

IS 280 (2006)

Mild steel wire for general engineering purposes (Fourth Revision)

All Grade

6400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	6400	-
Cl 9(Tensile Test On UTM)	-	6400	-
Cl 11(Workmanship)	-	6400	-
Cl 13(Workmanship)	-	6400	-
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	6400	-
Cl 9(Tensile Test On UTM)	-	6400	-
Cl 11(Workmanship)	-	6400	-
Cl 13(Workmanship)	-	6400	-
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	6400	-
Cl 9(Tensile Test On UTM)	-	6400	-
Cl 11(Workmanship)	-	6400	-
Cl 13(Workmanship)	-	6400	-
6 AND AS PER IS 7887(MICRO ALLOY)	-	6400	-
6 AND AS PER IS 7887(ALUMINIUM)	-	6400	-
6 AND AS PER IS 7887(PHOSPHORUS)	-	6400	-
6 AND AS PER IS 7887(SULPHUR)	-	6400	-
6 AND AS PER IS 7887(MANGANESE)	-	6400	-
6 AND AS PER IS 7887(SILICON)	-	6400	-
6 AND AS PER IS 7887(CARBON)	-	6400	-
7 & 8(Ovality)	-	6400	-
7 & 8(Diameter)	-	6400	-
9.2(Wrapping Test)	-	6400	-
9.3(Bend test)	-	6400	-
10(Finish)	-	6400	-
11(Coating test)	-	6400	-
13(Freedom from defects)	-	6400	-
Cl 13(Workmanship)	-	6400	-
Cl 11(Workmanship)	-	6400	-
Cl 9(Tensile Test On UTM)	-	6400	-
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	6400	-
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	6400	-
Cl 9(Tensile Test On UTM)	-	6400	-
Cl 11(Workmanship)	-	6400	-
Cl 13(Workmanship)	-	6400	-
Clause 6 and Note 3 of IS 7887(Any Instrumental Method/Chemical Method)	-	6400	-
Clause 6 and Note 3 of IS 7887(Copper)	-	6400	-
14(Packing)	-	6400	-
15(Marking)	-	6400	-
Clause 6 and Note 3 of IS 7887(Copper)	-	6400	-
CL 08(AVG Outer dia (08))	-	6400	-
CL 08(MAX OVALITY (08))	-	6400	-

27 May, 2028

-
-

581

EKO PRO ENGINEERS PRIVATE LIMITED (32/37) GHAZIABAD

8164006

IS 6754 (1972)

Specification for aluminium alloy ingots for bearings

All Designation

6300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.1(General requirements)	-	6300	-
3.1(Manufacture)	-	6300	-
4.1(Chemical composition)	-	6300	-
5.1(Shape and size)	-	6300	-
6(Freedom from Defects)	-	6300	-
7(Selection of Sample for chemical analysis)	-	6300	-
8(Retest)	-	6300	-
9(Marking)	-	6300	-
Table-1, Clause - 4.1(Copper)	-	6300	-
Table-1, Clause - 4.1(Magnesium)	-	6300	-
Table-1, Clause - 4.1(Manganese)	-	6300	-
Table-1, Clause - 4.1(Titanium)	-	6300	-
Table-1, Clause - 4.1(Silicon)	-	6300	-
Table-1, Clause - 4.1(Nickel)	-	6300	-
Table-1, Clause - 4.1(Tin)	-	6300	-
Table-1, Clause - 4.1(Other elements)	-	6300	-
Table-1, Clause - 4.1(Total of Fe+Si+Mn)	-	6300	-
Table-1, Clause - 4.1(Aluminium)	-	6300	-

27 May, 2028

-
-

582

EKO PRO ENGINEERS PRIVATE LIMITED (32/37) GHAZIABAD

8164006

IS 2879 (1998)

Mild steel for metal arc welding electrodes - Specification (Third Revision)

EWR, EWNR

7400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7(Workmanship)	-	7400	-
Cl 8 & 9(Diameter)	-	7400	-
Cl 7(Workmanship)	-	7400	-
Cl 8 & 9(Diameter)	-	7400	-
Cl 7(Workmanship)	-	7400	-
Cl 8 & 9(Diameter)	-	7400	-
6(Carbon %)	-	7400	-
6(Manganese %)	-	7400	-
6(Phosphorus %)	-	7400	-
6(Sulphur %)	-	7400	-
6(Silicon %)	-	7400	-
6( Copper %)	-	7400	-
6( Aluminium %)	-	7400	-
6( Nb)	-	7400	-
6(V)	-	7400	-
6( Ti)	-	7400	-
6(Cr)	-	7400	-
6(Mo)	-	7400	-
6(Ni)	-	7400	-
6(Cr+ Mo+ Ni)	-	7400	-
6(Carbon %)	-	7400	-
6(Manganese %)	-	7400	-
6(Phosphorus %)	-	7400	-
6(Sulphur %)	-	7400	-
6(Silicon %)	-	7400	-
6( Copper %)	-	7400	-
6( Aluminium %)	-	7400	-
6( Nb)	-	7400	-
6(V)	-	7400	-
6( Ti)	-	7400	-
6(Cr)	-	7400	-
6(Mo)	-	7400	-
6(Ni)	-	7400	-
6(Cr+ Mo+ Ni)	-	7400	-
6(Carbon %)	-	7400	-
6(Manganese %)	-	7400	-
6(Phosphorus %)	-	7400	-
6(Sulphur %)	-	7400	-
6(Silicon %)	-	7400	-
6( Copper %)	-	7400	-
6( Aluminium %)	-	7400	-
6( Nb)	-	7400	-
6(V)	-	7400	-
6( Ti)	-	7400	-
6(Cr)	-	7400	-
6(Mo)	-	7400	-
6(Ni)	-	7400	-
6(Cr+ Mo+ Ni)	-	7400	-
Cl. 9.2(Maximum Difference between 2 readings taken at any 2 diameters across cross section)	-	7400	-
Cl. 8,9(Width across flat)	-	7400	-
Cl. 8,9(Length)	-	7400	-
Cl 8 & 9(Diameter)	-	7400	-
Cl 7(Workmanship)	-	7400	-
Cl 7(Workmanship)	-	7400	-
Cl 8 & 9(Diameter)	-	7400	-
9.2 (a)(Width Across Flat)	-	7400	-
9.2 (b)(Diameter Difference)	-	7400	-

27 May, 2028

-
-

583

EKO PRO ENGINEERS PRIVATE LIMITED (32/37) GHAZIABAD

8164006

IS 3502 (2009)

Steel chequered plates (Third Revision)

All Grade

5900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5(Workmanship)	-	5900	-
Cl 6(Workmanship)	-	5900	-
Cl 8(Tensile Test)	-	5900	-
Cl 9(Press)	-	5900	-
Cl 10(Length, Width, Thickness & Chequered Height)	-	5900	-
Cl 5(Workmanship)	-	5900	-
Cl 6(Workmanship)	-	5900	-
Cl 8(Tensile Test)	-	5900	-
Cl 9(Press)	-	5900	-
Cl 10(Length, Width, Thickness & Chequered Height)	-	5900	-
Cl 5(Workmanship)	-	5900	-
Cl 6(Workmanship)	-	5900	-
Cl 8(Tensile Test)	-	5900	-
Cl 9(Press)	-	5900	-
Cl 10(Length, Width, Thickness & Chequered Height)	-	5900	-
Cl. 11(Weight)	-	5900	-
Cl. 10(Thickness)	-	5900	-
Cl. 10(Width)	-	5900	-
Cl.8(Elongation)	-	5900	-
Cl.8(Yield Stress)	-	5900	-
4.1(Grade E 250A of IS 2062.)	-	5900	-
Cl 10(Length, Width, Thickness & Chequered Height)	-	5900	-
Cl 9(Press)	-	5900	-
Cl 8(Tensile Test)	-	5900	-
Cl 6(Workmanship)	-	5900	-
Cl 5(Workmanship)	-	5900	-
Cl.4.1 (IS-2062, E250A)(CARBON)	-	5900	-
Cl.4.1 (IS-2062, E250A)(SULPHUR)	-	5900	-
Cl.4.1 (IS-2062, E250A)(PHOSPHURS)	-	5900	-
Cl.4.1 (IS-2062, E250A)(MANGANESE)	-	5900	-
Cl.4.1 (IS-2062, E250A)(SILICON)	-	5900	-
Cl.4.1 (IS-2062, E250A)(CARBON EQUIVALENT)	-	5900	-
Cl.4.1 (IS-2062, E250A)(NITROGEN)	-	5900	-
Cl 5(Workmanship)	-	5900	-
Cl 6(Workmanship)	-	5900	-
Cl 8(UTM)	-	5900	-
Cl 9(Press)	-	5900	-
Cl 10(Length, Width, Thickness & Chequered Height)	-	5900	-
4(Carbon as C)	-	5900	-
4(Manganese as Mn)	-	5900	-
4(Sulphur as S)	-	5900	-
4(Phosphorus as P)	-	5900	-
4(Silicon as Si)	-	5900	-
4(Aluminium as Al)	-	5900	-
4(Micro Alloying elements)	-	5900	-
4(Niobium as Nb)	-	5900	-
4(Vanadium as V)	-	5900	-
4(Titanium as Ti)	-	5900	-
4(Nitrogen content)	-	5900	-
8(Tensile Strength-IS:1608(P1)-22)	-	5900	-
8(Yield Stress-IS:1608(P1)-22)	-	5900	-
8(Elongation on SoA 5.65mm GL)	-	5900	-
10(Length - SOP MT-23)	-	5900	-
10(Width - SOP MT-23)	-	5900	-
10(Thickness- SOP MT-23)	-	5900	-
10(Mass -SOP MT-23)	-	5900	-
10(Chequred Height - SOP MT-23)	-	5900	-
10(Chequred Height - SOP MT-23)	-	5900	-
Cl 4.1(Carbon- IS 228(Part 1))	-	5900	-
Cl 4.1(Sulphur- IS 228(Part 9))	-	5900	-
Cl 4.1(Phosphorous- IS 228(Part 3))	-	5900	-
Cl 4.1(Manganese- IS 228(Part 2))	-	5900	-
Cl 4.1(Carbon Equivalent (CE))	-	5900	-
Cl 4.1(Silicon- IS 228(Part 2))	-	5900	-
Cl 4.1(Nitrogen -IS 228(Part 19))	-	5900	-

27 May, 2028

-
-

584

EKO PRO ENGINEERS PRIVATE LIMITED (32/37) GHAZIABAD

8164006

IS 206 (2010)

Tee and strap hinges - Specification (Fifth Revision)

All Grade

3400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(DIMENSIONS AND TOLERANCES)	-	3400	-
6(WORKMANSHIP)	-	3400	-
7(FINISH)	-	3400	-
10(MARKING)	-	3400	-
Clause 3.1,1(Light weight (Type 1))	-	3400	-
Clause 3.1,2(Light weight (Type 2))	-	3400	-
Clause 3.1,3(Medium weight (Type 1))	-	3400	-
Clause 3.1,4(Medium weight (Type 2))	-	3400	-
Clause 3.1,5(Heavy weight (Type 1))	-	3400	-
Clause 3.1,6(Heavy weight (Type 2))	-	3400	-
Clause 3.1,7(Heavy weight (Type 3))	-	3400	-
Clause 3.2,1(Light weight)	-	3400	-
Clause 3.2,2(Medium weight (Type 1))	-	3400	-
Clause 3.2,3(Medium weight (Type 2))	-	3400	-
Clause 3.2,4(Heavy weight )	-	3400	-
Clause 4 Table 1(i)(Mild steel sheet)	-	3400	-
Clause 4 Table 1(ii)(Mild steel wire)	-	3400	-
Clause 5.1(Dimensions)	-	3400	-
Clause 6(Workmanship)	-	3400	-
Clause 8(Packing)	-	3400	-
Clause 9(SAMPLING AND CRITERION FOR CONFORMITY)	-	3400	-
Clause 10(Marking)	-	3400	-

27 May, 2028

-
-

585

EKO PRO ENGINEERS PRIVATE LIMITED (32/37) GHAZIABAD

8164006

IS 278 (2009)

Galvanized steel barbed wire for fencing - Specification (Fourth Revision)

All Grade

4100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Type A/Type B)	-	4100	-
5 Table-1(Sizes Diameter of Line wire)	-	4100	-
5 Table-1(Sizes Diamater of Point wire)	-	4100	-
5 Table-1(Sizes Mass of Completed barbed wire)	-	4100	-
5 Table-1(Sizes Distance between two barbs)	-	4100	-
5 Table-1(Sizes No. of Lays between the two consequtive barbs)	-	4100	-
7.1(Manufacture)	-	4100	-
7.2(Manufacture)	-	4100	-
7.2(Manufacture)	-	4100	-
7.3(Manufacture)	-	4100	-
8(CHROMATING)	-	4100	-
9.1(Freedom from defects)	-	4100	-
9.2(Freedom from defects)	-	4100	-
9.2(Freedom from defects)	-	4100	-
9.2(Freedom from defects)	-	4100	-
12.1(Tensile Strength)	-	4100	-
12.1(Breaking load)	-	4100	-
12.2.1(Mass of zinc coating (line wire))	-	4100	-
12.2.2(Mass of zinc coating (point wire))	-	4100	-
12.2(Uniformity of zinc coating)	-	4100	-
12.3(Ductility)	-	4100	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	4100	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	4100	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	4100	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	4100	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	4100	-
Cl. 7.2(Cut Angle)	-	4100	-
Cl. 7.2(Length of Barbs)	-	4100	-
Cl. 7.2(Finishing of Barbs)	-	4100	-
Cl. 7.1(General)	-	4100	-
11(Sampling)	-	4100	-
13(Marking)	-	4100	-
CL 05(Average dia of line wire (08))	-	4100	-
CL 05(Average dia of point wire (08))	-	4100	-
CL 05(Average Distance Between Two Barbs (08))	-	4100	-

27 May, 2028

-
-

586

EKO PRO ENGINEERS PRIVATE LIMITED (32/37) GHAZIABAD

8164006

IS 5484 (2023)

EC GRADE ALUMINIUM ROD PRODUCED BY CONTINUOUS CASTING AND ROLLING - SPECIFICATION

ALL Designation

8900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5(Manufacture)	-	8900	-
Cl-6.1(Grades and chemical composition of EC grade aluminium rod produced)	-	8900	-
Cl-6.2(Chemical analysis of the material)	-	8900	-
Cl-7.1(General condition for delivery and inspection relating)	-	8900	-
Cl-9(Ultimate tensile strength and elongation)	-	8900	-
Cl-10.1(Resistivity)	-	8900	-
Cl-10.1(electrical conductivity)	-	8900	-
Cl-10.1.1(Resistivity and Conductivity Limit)	-	8900	-
Cl-11(Dimensions)	-	8900	-
Cl-13(Finish and freedom from defects)	-	8900	-
Cl-14(Rejection and retest)	-	8900	-
Cl-16(Marking)	-	8900	-
CL 9(ULTIMATE TENSILE STRENGTH AND ELONGATION)	-	8900	-
CL 11(DIMENSIONS)	-	8900	-
CL 13(FINISH AND FREEDOM FROM DEFECTS)	-	8900	-
9(Elongation)	-	8900	-
12(Joint)	-	8900	-
Cl.6.1 as per IS 4026(Silicon - IS 504 and its parts or any other intrumental/chemical methods)	-	8900	-
Cl.6.1 as per IS 4026(Iron - IS 504 and its parts or any other intrumental/chemical methods)	-	8900	-
Cl.6.1 as per IS 4026(Copper - IS 228 and its parts or any other intrumental/chemical methods)	-	8900	-
Cl.6.1 as per IS 4026(Manganese - IS 228 and its parts or any other intrumental/chemical methods)	-	8900	-
Cl.6.1 as per IS 4026(Magnesium - IS 228 and its parts or any other intrumental/chemical methods)	-	8900	-
Cl.6.1 as per IS 4026(Chromium - IS 228 and its parts or any other intrumental/chemical methods)	-	8900	-
Cl.6.1 as per IS 4026(Zinc - IS 228 and its parts or any other intrumental/chemical methods)	-	8900	-
Cl.6.1 as per IS 4026(Titanium - IS 228 and its parts or any other intrumental/chemical methods)	-	8900	-

27 May, 2028

-
-

587

EKO PRO ENGINEERS PRIVATE LIMITED (32/37) GHAZIABAD

8164006

IS 2831 (2012)

Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into structural steel (Ordinary Quality) - Specification (Fourth Revision)

C8, C15, C22

5900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6.1, Table 1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5900	-
Cl. 6.1, Table 1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5900	-
Cl. 6.1, Table 1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5900	-
Cl. 6.1, Table 1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5900	-
Cl. 6.1, Table 1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5900	-
Cl. 6.1, Table 1(Aluminium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5900	-
Cl. 6.1, Table 1(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5900	-
Cl. 6.1, Table 1(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5900	-
Cl. 6.1, Table 1(Niobium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5900	-
Cl. 6.1, Table 1(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5900	-
Cl. 6.1, Table 1(Titanium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5900	-
9( FREEDOM FROM DEFECTS)	-	5900	-
11 & 12(DIMENSIONS and Tolerances)	-	5900	-
11(Dimensions)	-	5900	-
10.2(Bend)	-	5900	-
10.3(Chamber)	-	5900	-
11(Dimensions)	-	5900	-
10.2(Bend)	-	5900	-
10.3(Chamber)	-	5900	-
Clause 6.1.1(IS 2831 : 2012)	-	5900	-
Cl. 11, 12 Table 3(Thickness )	-	5900	-
Cl. 11, 12 Table 3(Width Across Flat)	-	5900	-
Clause 9.4(Camber)	-	5900	-
Clause 9.3(Bend)	-	5900	-
Clause 6.1.1(By calculation)	-	5900	-
Table 1 Note 2(Any Instrumental Method/Chemical Method)	-	5900	-
Clause 6.1.1(By calculation)	-	5900	-
Table 1 Note 2(Any Instrumental Method/Chemical Method)	-	5900	-
Table 1 Note 2(Any Instrumental Method/Chemical Method)	-	5900	-
Clause 6.1.1(Carbon Equivalent (CE))	-	5900	-
Table 1 Note 2(Nb+V+Ti)	-	5900	-
8(Selection of Test sample)	-	5900	-
13(Marking)	-	5900	-
Clause 6.1.1(Carbon Equivalent (CE))	-	5900	-
Table 1 Note 2(Nb+V+Ti)	-	5900	-

27 May, 2028

-
-

588

EKO PRO ENGINEERS PRIVATE LIMITED (32/37) GHAZIABAD

8164006

IS 13983 (1994)

Stainless Steel Sinks For Domestic Purposes

A1,A2,B1,B2,C,D,E1,E2,E3,F

6900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9(Marking)	-	6900	-
4(Type)	-	6900	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304)(Carbon Content)	-	6900	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304)(Silicon Content)	-	6900	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304)(Manganese Content)	-	6900	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304)(Nickel Content)	-	6900	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304)(Chromium Content)	-	6900	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304)(Sulphur Content)	-	6900	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304)(Phouphorous Content)	-	6900	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304)(Nitrogen Content)	-	6900	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302)(Carbon Content)	-	6900	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302)(Silicon Content)	-	6900	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302)(Manganese Content)	-	6900	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302)(Nickel Content)	-	6900	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302)(Chromium Content)	-	6900	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302)(Sulphur Content)	-	6900	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302)(Phouphorous Content)	-	6900	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302)(Nitrogen Content)	-	6900	-
6(Thickness of sheet/strip)	-	6900	-
6(Depth of bowl)	-	6900	-
6(Internal dimensions of the bowl)	-	6900	-
6(Bowl locating limits)	-	6900	-
6(Co-ordinating sizes)	-	6900	-
7.1(Consruction and workmanship)	-	6900	-
7.1.1(Consruction and workmanship)	-	6900	-
7.2(Consruction and workmanship)	-	6900	-
7.2.1(Consruction and workmanship)	-	6900	-
7.3(Drainers)	-	6900	-
7.4(Waste outlet)	-	6900	-
7.5(Tap holes)	-	6900	-
7.6(Overflows)	-	6900	-
8(Finish)	-	6900	-
5(MATERIALS)	-	6900	-
6.1.1(Thickness of Sheet/Strip)	-	6900	-
6.1.2(Thickness of Sheet/Strip)	-	6900	-
6.2(Depth of Bowls)	-	6900	-
6.3(Internal Dimensions of Bowls)	-	6900	-
6.4.1(Bowl Locating Limits)	-	6900	-
6.5(Coordinating Sizes)	-	6900	-
7.1(CONSTRUCTION AND WORKMANSHIP)	-	6900	-
7.1.1(CONSTRUCTION AND WORKMANSHIP)	-	6900	-
7.2.1(CONSTRUCTION AND WORKMANSHIP)	-	6900	-
7.3(CONSTRUCTION AND WORKMANSHIP)	-	6900	-
7.4(Waste Outlet)	-	6900	-
7.5(Tap Holes)	-	6900	-
7.6(OVERFLOW)	-	6900	-
Clause no. 4(types)	-	6900	-
Caluse no. 5("Material -Austenitic stainless steel of Grade Designation")	-	6900	-
Clause no. 6.1(Thickness of sheet)	-	6900	-
Clause no. 6.2(Depth of Bowls)	-	6900	-
Clause no. 6.3(Internal dimensions of bowls)	-	6900	-
Clause no. 6.4(Bowl Locating Limits)	-	6900	-
Clause no. 6.5, Table No. 1(Dimension of the sink)	-	6900	-
Clause no. 7(Construction and workmanship)	-	6900	-
Clause no. 8(Finish)	-	6900	-
Clause no. 9(Mark)	-	6900	-

27 May, 2028

-
-

589

EKO PRO ENGINEERS PRIVATE LIMITED (32/37) GHAZIABAD

8164006

IS 15911 (2010)

Structural steel (Ordinary Quality) - Specification

E165, E170, E215

7200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table-1, 5.1, 8.1 & 8.2(Carbon: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	7200	-
Table-1, 5.1, 8.1 & 8.2(Sulphur: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	7200	-
Table-1, 5.1, 8.1 & 8.2(Phosphorous: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	7200	-
Table-1, 5.1, 8.1 & 8.2(Manganese: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	7200	-
Table-1, 5.1, 8.1 & 8.2(Silicon: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	7200	-
Table-1, 5.1, 8.1 & 8.2(Chromium: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	7200	-
Table-1, 5.1, 8.1 & 8.2(Molybdenum: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	7200	-
Table-1, 5.1, 8.1 & 8.2(Vanadium: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	7200	-
Table-1, 5.1, 8.1 & 8.2(Nickel: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	7200	-
Table-1, 5.1, 8.1 & 8.2(Copper: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	7200	-
Table-1, 5.1, 8.1 & 8.2(Aluminium: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	7200	-
Table-1, 5.1, 8.1 & 8.2(Nitrogen: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	7200	-
Table-1, 5.1, 8.1 & 8.2(Niobium: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	7200	-
Table-1, 5.1, 8.1 & 8.2(Titanium: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	7200	-
Table-1, 5.1, 8.1 & 8.2(Boron: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	7200	-
7(Freedom from defects)	-	7200	-
5 and 10.3.1(Tensile strength. IS 1608)	-	7200	-
5 and 10.3.1(Yield Stress. IS 1608)	-	7200	-
5 and 10.3.1(Percentage Elongation. . IS 1608)	-	7200	-
5 and 10.3.1(Internal Bend Diameter)	-	7200	-
11.3( Bend Test. IS 1599)	-	7200	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(Mass. IS 808)	-	7200	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(Sectional Area. IS 808)	-	7200	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(D)	-	7200	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(B)	-	7200	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(t)	-	7200	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(T)	-	7200	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(Flange Slop, Max α , )	-	7200	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(R1)	-	7200	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(R2)	-	7200	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(Ix)	-	7200	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(Iy)	-	7200	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(rx)	-	7200	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(ry)	-	7200	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(Zx)	-	7200	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(Zy)	-	7200	-
Cl 12 of IS 15911 and Table 2.2 of IS 808(Mass. IS 808)	-	7200	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(Sectional Area. IS 808)	-	7200	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(D)	-	7200	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(B)	-	7200	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(t)	-	7200	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(T)	-	7200	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(Flange Slop, Max α , )	-	7200	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(R1)	-	7200	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(R2)	-	7200	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(Ix)	-	7200	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(Iy)	-	7200	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(rx)	-	7200	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(ry)	-	7200	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(Zx)	-	7200	-
Cl 12 of IS 15911 and Table 2.1 of IS 808(Zy)	-	7200	-
Cl 12 of IS 15911 and Table 3.1 of IS 808(Mass. IS 808)	-	7200	-
Cl 12 of IS 15911 and Table 3.1 of IS 808(Sectional Area. IS 808)	-	7200	-
Cl 12 of IS 15911 and Table 3.1 of IS 808(D)	-	7200	-
Cl 12 of IS 15911 and Table 3.1 of IS 808(B)	-	7200	-
Cl 12 of IS 15911 and Table 3.1 of IS 808(t)	-	7200	-
Cl 12 of IS 15911 and Table 3.1 of IS 808(T)	-	7200	-
Cl 12 of IS 15911 and Table 3.1 of IS 808(Flange Slop, Max α , )	-	7200	-
Cl 12 of IS 15911 and Table 3.1 of IS 808(R1)	-	7200	-
Cl 12 of IS 15911 and Table 3.1 of IS 808(R2)	-	7200	-
Cl 12 of IS 15911 and Table 3.1 of IS 808(Ix)	-	7200	-
Cl 12 of IS 15911 and Table 3.1 of IS 808(Iy)	-	7200	-
Cl 12 of IS 15911 and Table 3.1 of IS 808(rx)	-	7200	-
Cl 12 of IS 15911 and Table 3.1 of IS 808(ry)	-	7200	-
Cl 12 of IS 15911 and Table 3.1 of IS 808(Zx)	-	7200	-
Cl 12 of IS 15911 and Table 3.1 of IS 808(Zy)	-	7200	-
Cl 12 of IS 15911 and Table 4.1 of IS 808(Mass. IS 808)	-	7200	-
Cl 12 of IS 15911 and Table 4.1 of IS 808(Sectional Area. IS 808)	-	7200	-
Cl 12 of IS 15911 and Table 4.1 of IS 808(D)	-	7200	-
Cl 12 of IS 15911 and Table 4.1 of IS 808(B)	-	7200	-
Cl 12 of IS 15911 and Table 4.1 of IS 808(t)	-	7200	-
Cl 12 of IS 15911 and Table 4.1 of IS 808(T)	-	7200	-
Cl 12 of IS 15911 and Table 4.1 of IS 808(Flange Slop, Max α , )	-	7200	-
Cl 12 of IS 15911 and Table 4.1 of IS 808(R1)	-	7200	-
Cl 12 of IS 15911 and Table 4.1 of IS 808(R2)	-	7200	-
Cl 12 of IS 15911 and Table 4.1 of IS 808(Cy)	-	7200	-
Cl 12 of IS 15911 and Table 4.1 of IS 808(Ix)	-	7200	-
Cl 12 of IS 15911 and Table 4.1 of IS 808(Iy)	-	7200	-
Cl 12 of IS 15911 and Table 4.1 of IS 808(rx)	-	7200	-
Cl 12 of IS 15911 and Table 4.1 of IS 808(ry)	-	7200	-
Cl 12 of IS 15911 and Table 4.1 of IS 808(Zx)	-	7200	-
Cl 12 of IS 15911 and Table 4.1 of IS 808(Zy)	-	7200	-
Cl 12 of IS 15911 and Table 5.1 of IS 808(Mass. IS 808)	-	7200	-
Cl 12 of IS 15911 and Table 5.1 of IS 808(Sectional Area. IS 808)	-	7200	-
Cl 12 of IS 15911 and Table 5.1 of IS 808(A*B)	-	7200	-
Cl 12 of IS 15911 and Table 5.1 of IS 808(R1)	-	7200	-
Cl 12 of IS 15911 and Table 5.1 of IS 808(R2)	-	7200	-
Cl 12 of IS 15911 and Table 5.1 of IS 808(Cx)	-	7200	-
Cl 12 of IS 15911 and Table 5.1 of IS 808(Cy)	-	7200	-
Cl 12 of IS 15911 and Table 5.1 of IS 808(Ix)	-	7200	-
Cl 12 of IS 15911 and Table 5.1 of IS 808(Iy)	-	7200	-
Cl 12 of IS 15911 and Table 5.1 of IS 808(Ia( Max ))	-	7200	-
Cl 12 of IS 15911 and Table 5.1 of IS 808(Iv( Max ))	-	7200	-
Cl 12 of IS 15911 and Table 5.1 of IS 808(rx)	-	7200	-
Cl 12 of IS 15911 and Table 5.1 of IS 808(ry)	-	7200	-
Cl 12 of IS 15911 and Table 5.1 of IS 808(ru( Max ))	-	7200	-
Cl 12 of IS 15911 and Table 5.1 of IS 808(rv( Min ))	-	7200	-
Cl 12 of IS 15911 and Table 5.1 of IS 808(Zx)	-	7200	-
Cl 12 of IS 15911 and Table 5.1 of IS 808(Zy )	-	7200	-
Cl 12 of IS 15911 and Table 6.1 of IS 808(Mass. IS 808)	-	7200	-
Cl 12 of IS 15911 and Table 6.1 of IS 808(Sectional Area. IS 808)	-	7200	-
Cl 12 of IS 15911 and Table 6.1 of IS 808(A*B)	-	7200	-
Cl 12 of IS 15911 and Table 6.1 of IS 808(R1)	-	7200	-
Cl 12 of IS 15911 and Table 6.1 of IS 808(R2)	-	7200	-
Cl 12 of IS 15911 and Table 6.1 of IS 808(Cx)	-	7200	-
Cl 12 of IS 15911 and Table 6.1 of IS 808(Cy)	-	7200	-
Cl 12 of IS 15911 and Table 6.1 of IS 808(Tanα)	-	7200	-
Cl 12 of IS 15911 and Table 6.1 of IS 808(Ix)	-	7200	-
Cl 12 of IS 15911 and Table 6.1 of IS 808(Iy)	-	7200	-
Cl 12 of IS 15911 and Table 6.1 of IS 808(Ia( Max ))	-	7200	-
Cl 12 of IS 15911 and Table 6.1 of IS 808(Iv( Max ))	-	7200	-
Cl 12 of IS 15911 and Table 6.1 of IS 808(rx)	-	7200	-
Cl 12 of IS 15911 and Table 6.1 of IS 808(ry)	-	7200	-
Cl 12 of IS 15911 and Table 6.1 of IS 808(ru( Max ))	-	7200	-
Cl 12 of IS 15911 and Table 6.1 of IS 808(rv( Min ))	-	7200	-
Cl 12 of IS 15911 and Table 6.1 of IS 808(Zx)	-	7200	-
Cl 12 of IS 15911 and Table 6.1 of IS 808(Zy )	-	7200	-
Cl 12 of IS 15911 and Table 6.2 of IS 808(Mass. IS 808)	-	7200	-
Cl 12 of IS 15911 and Table 6.2 of IS 808(Sectional Area. IS 808)	-	7200	-
Cl 12 of IS 15911 and Table 6.2 of IS 808(A*B)	-	7200	-
Cl 12 of IS 15911 and Table 6.2 of IS 808(R1)	-	7200	-
Cl 12 of IS 15911 and Table 6.2 of IS 808(R2)	-	7200	-
Cl 12 of IS 15911 and Table 6.2 of IS 808(Cx)	-	7200	-
Cl 12 of IS 15911 and Table 6.2 of IS 808(Cy)	-	7200	-
Cl 12 of IS 15911 and Table 6.2 of IS 808(Tanα)	-	7200	-
Cl 12 of IS 15911 and Table 6.2 of IS 808(Ix)	-	7200	-
Cl 12 of IS 15911 and Table 6.2 of IS 808(Iy)	-	7200	-
Cl 12 of IS 15911 and Table 6.2 of IS 808(Ia( Max ))	-	7200	-
Cl 12 of IS 15911 and Table 6.2 of IS 808(Iv( Max ))	-	7200	-
Cl 12 of IS 15911 and Table 6.2 of IS 808(rx)	-	7200	-
Cl 12 of IS 15911 and Table 6.2 of IS 808(ry)	-	7200	-
Cl 12 of IS 15911 and Table 6.2 of IS 808(ru( Max ))	-	7200	-
Cl 12 of IS 15911 and Table 6.2 of IS 808(rv( Min ))	-	7200	-
Cl 12 of IS 15911 and Table 6.2 of IS 808(Zx)	-	7200	-
Cl 12 of IS 15911 and Table 6.2 of IS 808(Zy )	-	7200	-
Cl 12 of IS 15911 and Table 1 of IS 1173(Clauses 3.1 , 5.1 and Table 1 of IS 1173)	-	7200	-
Cl 12 of IS 15911 and Table 1 of IS 1252(Clauses 4.1 , 6.1 and Table 1 of IS 1252)	-	7200	-
Cl 12 of IS 15911 and Table 2 of IS 1730(Clauses 4.1 , 4.2 and Table 1 of IS 1730)	-	7200	-
Cl 12 of IS 15911 and Table 2 of IS 1730(Clauses 4.2 and Table 1 of IS 1730)	-	7200	-
Cl 12 of IS 15911 and Table 3 of IS 1730(Clauses 4.3 and Table 1 of IS 1730)	-	7200	-
Cl 12 of IS 15911 and Table 4 of IS 1730(Clauses 5.1 and Table 1 of IS 1730)	-	7200	-
Cl 12 of IS 15911 and Table 5 of IS 1730(Clauses 5.2 and Table 1 of IS 1730)	-	7200	-
Cl 12 of IS 15911 and Table 6 of IS 1730(Clauses 6.1 and Table 1 of IS 1730)	-	7200	-
Cl 12 of IS 15911 and Table 7 of IS 1730(Clauses 6.2 and Table 1 of IS 1730)	-	7200	-
Cl 12 of IS 15911 and Table 8 of IS 1730(Clauses 7.1, 7.2 and Table 1 of IS 1730)	-	7200	-
Cl 12 of IS 15911 and Table 9 of IS 1730(Clauses 7.2 and Table 1 of IS 1730)	-	7200	-
Cl 12 of IS 15911 and Table 1 of IS 1732(Clauses 3.1, 4.1,4.1.1 and Table 1 of IS 1732)	-	7200	-
Cl 12 of IS 15911 and Table 2 of IS 1732(Clauses 3.1, 4.1,4.1.1 and Table 1 of IS 1732)	-	7200	-
Cl 12 of IS 15911 and Table 1 of IS 1863(Clauses 4.1, 5.5 and Table 1 of IS 1863)	-	7200	-
Cl 12 of IS 15911 and Table 2 of IS 1863(Clauses 5.1 and Table 2 of IS 1863)	-	7200	-
Cl 12 of IS 15911 and Table 3 of IS 1863(Clauses 5.2 and Table 2 of IS 1863)	-	7200	-
Cl 12 of IS 15911 and Table 1 of IS 3954(Clauses 4, 6.1 and Table 2 of IS 3954)	-	7200	-
13(Tolerances)	-	7200	-
17(Marking)	-	7200	-

27 May, 2028

-
-

590

EKO PRO ENGINEERS PRIVATE LIMITED (32/37) GHAZIABAD

8164006

IS 1079 (2017)

Hot rolled carbon steel sheet, plate and strip - Specification (Seventh Revision)

All Designation

6900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(UTM)	-	6900	-
Cl 9(Press)	-	6900	-
Cl 10(Die Press)	-	6900	-
Cl 12(Workmanship)	-	6900	-
Cl 13(Length, Width & Thickness)	-	6900	-
Cl 8(UTM)	-	6900	-
Cl 9(Press)	-	6900	-
Cl 10(Die Press)	-	6900	-
Cl 12(Workmanship)	-	6900	-
Cl 13(Length, Width & Thickness)	-	6900	-
Cl 8(UTM)	-	6900	-
Cl 9(Press)	-	6900	-
Cl 10(Die Press)	-	6900	-
Cl 12(Workmanship)	-	6900	-
Cl 13(Length, Width & Thickness)	-	6900	-
6.1(Carbon %)	-	6900	-
6.1(Manganese %)	-	6900	-
6.1(Phosphorus %)	-	6900	-
6.1(Sulphur %)	-	6900	-
6.1(Silicon %)	-	6900	-
6.1( Copper %)	-	6900	-
6.1( Aluminium %)	-	6900	-
6.1( Nb)	-	6900	-
6.1(V)	-	6900	-
6.1( Ti)	-	6900	-
6.1(Cr)	-	6900	-
6.1(Mo)	-	6900	-
6.1(Ni)	-	6900	-
6.1( Nitrogen%)	-	6900	-
6.1(Microalloying)	-	6900	-
6.1(Carbon %)	-	6900	-
6.1(Manganese %)	-	6900	-
6.1(Phosphorus %)	-	6900	-
6.1(Sulphur %)	-	6900	-
6.1(Silicon %)	-	6900	-
6.1( Copper %)	-	6900	-
6.1( Aluminium %)	-	6900	-
6.1( Nb)	-	6900	-
6.1(V)	-	6900	-
6.1( Ti)	-	6900	-
6.1(Cr)	-	6900	-
6.1(Mo)	-	6900	-
6.1(Ni)	-	6900	-
6.1( Nitrogen%)	-	6900	-
6.1(Microalloying)	-	6900	-
6.1(Carbon %)	-	6900	-
6.1(Manganese %)	-	6900	-
6.1(Phosphorus %)	-	6900	-
6.1(Sulphur %)	-	6900	-
6.1(Silicon %)	-	6900	-
6.1( Copper %)	-	6900	-
6.1( Aluminium %)	-	6900	-
6.1( Nb)	-	6900	-
6.1(V)	-	6900	-
6.1( Ti)	-	6900	-
6.1(Cr)	-	6900	-
6.1(Mo)	-	6900	-
6.1(Ni)	-	6900	-
6.1( Nitrogen%)	-	6900	-
6.1(Microalloying)	-	6900	-
Cl.13(Out of square)	-	6900	-
Cl.13(Flatness)	-	6900	-
Cl.13(Camber)	-	6900	-
Cl.13(Width)	-	6900	-
Cl.13(Thickness)	-	6900	-
Cl. 8.3, Cl. 8.3.1 Table 5 and Table 6(Percentage Elongation After Fracture at 5.65√A Gauge length)	-	6900	-
Cl. 8.3, Cl. 8.3.1 Table 5 and Table 6(Percentage Elongation After Fracture at 80 mm Gauge length)	-	6900	-
Cl. 8.3, Cl. 8.3.1 Table 5 and Table 6(Percentage Elongation After Fracture at 50 mm Gauge length)	-	6900	-
Cl. 8.3, Cl. 8.3.1 Table 6(0.2% Proof Stress/Yield Stress)	-	6900	-
Cl 13(Length, Width & Thickness)	-	6900	-
Cl 12(Workmanship)	-	6900	-
Cl 10(Die Press)	-	6900	-
Cl 9(Press)	-	6900	-
Cl 8(UTM)	-	6900	-
7(Material Test)	-	6900	-
9(Bend test)	-	6900	-
14(Calculation of weight)	-	6900	-
Cl 8(UTM)	-	6900	-
Cl 9(Press)	-	6900	-
Cl 10(Die Press)	-	6900	-
Cl 12(Workmanship)	-	6900	-
Cl 13(Length, Width & Thickness)	-	6900	-
8, Table 5 & 6(Tensile Strength)	-	6900	-
8, Table 5 & 6(Yield Strength)	-	6900	-
8, Table 5 & 6(Elongation)	-	6900	-
Clause 10(Cuppping Test)	-	6900	-
Clause 12(Freedom from defect)	-	6900	-
Clause 13(Length)	-	6900	-
Clause 7, Table 3, Note 1(Any Instrumental Method/Chemical Method)	-	6900	-
Clause 7, Table 3, Note 1(By Calculation)	-	6900	-
8, Table 5 & 6(Tensile Strength)	-	6900	-
8, Table 5 & 6(Yield Strength)	-	6900	-
8, Table 5 & 6(Elongation)	-	6900	-
Clause 10(Cuppping Test)	-	6900	-
Clause 12(Freedom from defect)	-	6900	-
Clause 13(Length)	-	6900	-
Clause 7, Table 3, Note 1(Boron)	-	6900	-
Clause 7, Table 3, Note 1(B+Ti+Nb+V)	-	6900	-
16(Marking and packing)	-	6900	-
8, Table 5 & 6(IS 1608 Part 1)	-	6900	-
8, Table 5 & 6(IS 1608 Part 1)	-	6900	-
8, Table 5 & 6(IS 1608 Part 1)	-	6900	-
Clause 10(IS 10175)	-	6900	-
Clause 12(IS 1079)	-	6900	-
Clause 13(IS/ISO 16160)	-	6900	-
Clause 7, Table 3, Note 1(Boron)	-	6900	-
Clause 7, Table 3, Note 1(B+Ti+Nb+V)	-	6900	-

27 May, 2028

-
-

591

EKO PRO ENGINEERS PRIVATE LIMITED (32/37) GHAZIABAD

8164006

IS 10748 (2004)

Hot - Rolled steel strip for welded tubes and pipes - Specification (Second Revision)

G1/ G2/ G3/ G4/ G5/ G6

5900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8 & Table 3(UTM)	-	5900	-
Cl 9(Press)	-	5900	-
Cl 11(Workmanship)	-	5900	-
Cl 12 & 13(Length, Width & Thickness)	-	5900	-
Cl 8 & Table 3(UTM)	-	5900	-
Cl 9(Press)	-	5900	-
Cl 11(Workmanship)	-	5900	-
Cl 12 & 13(Length, Width & Thickness)	-	5900	-
Cl 8 & Table 3(UTM)	-	5900	-
Cl 9(Press)	-	5900	-
Cl 11(Workmanship)	-	5900	-
Cl 12 & 13(Length, Width & Thickness)	-	5900	-
7.1(Carbon %)	-	5900	-
7.1(Manganese %)	-	5900	-
7.1(Phosphorus %)	-	5900	-
7.1(Sulphur %)	-	5900	-
7.1(Silicon %)	-	5900	-
7.1( Copper %)	-	5900	-
7.1( Aluminium %)	-	5900	-
7.1( Nb)	-	5900	-
7.1(V)	-	5900	-
7.1( Ti)	-	5900	-
7.1(Cr)	-	5900	-
7.1(Mo)	-	5900	-
7.1(Ni)	-	5900	-
7.1( Nitrogen%)	-	5900	-
7.1(CE)	-	5900	-
7.1(Carbon %)	-	5900	-
7.1(Manganese %)	-	5900	-
7.1(Phosphorus %)	-	5900	-
7.1(Sulphur %)	-	5900	-
7.1(Silicon %)	-	5900	-
7.1( Copper %)	-	5900	-
7.1( Aluminium %)	-	5900	-
7.1( Nb)	-	5900	-
7.1(V)	-	5900	-
7.1( Ti)	-	5900	-
7.1(Cr)	-	5900	-
7.1(Mo)	-	5900	-
7.1(Ni)	-	5900	-
7.1( Nitrogen%)	-	5900	-
7.1(CE)	-	5900	-
7.1(Carbon %)	-	5900	-
7.1(Manganese %)	-	5900	-
7.1(Phosphorus %)	-	5900	-
7.1(Sulphur %)	-	5900	-
7.1(Silicon %)	-	5900	-
7.1( Copper %)	-	5900	-
7.1( Aluminium %)	-	5900	-
7.1( Nb)	-	5900	-
7.1(V)	-	5900	-
7.1( Ti)	-	5900	-
7.1(Cr)	-	5900	-
7.1(Mo)	-	5900	-
7.1(Ni)	-	5900	-
7.1( Nitrogen%)	-	5900	-
7.1(CE)	-	5900	-
Table 1 ( Clauses 7.1 ,7.2 )(TITANIUM)	-	5900	-
Table 1 ( Clauses 7.1 ,7.2 )(VANADIUM)	-	5900	-
Table 1 ( Clauses 7.1 ,7.2 )(NIOBIUM)	-	5900	-
Table 1 ( Clauses 7.1 ,7.2 )(CARBON EQUIVELENT )	-	5900	-
Table 1 ( Clauses 7.1 ,7.2 )(Molybdenum)	-	5900	-
Table 1 ( Clauses 7.1 ,7.2 )(Chromium)	-	5900	-
Table 1 ( Clauses 7.1 ,7.2 )(Nickel)	-	5900	-
Table 1 ( Clauses 7.1 ,7.2 )( ALUMINIUM)	-	5900	-
Table 1 ( Clauses 7.1 ,7.2 )(SILICON)	-	5900	-
Table 1 ( Clauses 7.1 ,7.2 )(NITROGEN)	-	5900	-
Table 1 ( Clauses 7.1 ,7.2 )(MANGANESE)	-	5900	-
Table 1 ( Clauses 7.1 ,7.2 )(PHOSPHURS)	-	5900	-
Table 1 ( Clauses 7.1 ,7.2 )(SULPHUR)	-	5900	-
Table 1 ( Clauses 7.1 ,7.2 )( CARBON)	-	5900	-
Cl. 14(Weight)	-	5900	-
Cl. 12, 13(Camber)	-	5900	-
Cl. 12, 13(Thickness)	-	5900	-
Cl. 8, Table 3(Elongation)	-	5900	-
Cl. 8, Table 3(Yield Stress)	-	5900	-
Cl 12 & 13(Length, Width & Thickness)	-	5900	-
Cl 11(Workmanship)	-	5900	-
Cl 9(Press)	-	5900	-
Cl 8 & Table 3(UTM)	-	5900	-
Cl 8 & Table 3(UTM)	-	5900	-
Cl 9(Press)	-	5900	-
Cl 11(Workmanship)	-	5900	-
Cl 12 & 13(Length, Width & Thickness)	-	5900	-
7.0 (7)(Micro Alloying elements - IS:8811)	-	5900	-
8.0 (1)(Tensile Strength-IS:1608(P1))	-	5900	-
8.0 (2)(Yield Strength-IS:1608(P1))	-	5900	-
8.0 (3)(Elongation on 5.65 SoA GL-IS:1608(P1))	-	5900	-
12 (1)(Width - SOP MT-23)	-	5900	-
12 (2)(Thickness- SOP MT-23)	-	5900	-
12 (3)(Mass of Strip- SOP MT-23)	-	5900	-
15.0 & 15.1(Coil edges - IS:10748)	-	5900	-
15.0 & 15.2(Surface finish - IS:10748)	-	5900	-
15.0 & 15.5(Telescopicity - IS:10748)	-	5900	-
15(Condition of Coil)	-	5900	-
16(Marking)	-	5900	-
3.4(Vehicle Fuel System)	-	5900	-
9(Protective Treatment)	-	5900	-
Table 1 ( Clauses 7.1 ,7.2 )(Tungsten (W))	-	5900	-
Table 1 ( Clauses 7.1 ,7.2 )(Boron (B))	-	5900	-

27 May, 2028

-
-

592

EKO PRO ENGINEERS PRIVATE LIMITED (32/37) GHAZIABAD

8164006

IS 2141 (2000)

Hot dip galvanized stay strand - Specification (Fourth Revision)

All Grade

9990 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(S)	-	9990	-
4(P)	-	9990	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.2 to 0.32 mm dia For Hard Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.32 to 0.40 mm dia For Hard Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.40 to 0.50 mm dia For Hard Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.50 to 0.56 mm dia For Hard Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.56 to 0.63 mm dia For Hard Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.63 to 0.71 mm dia For Hard Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.71 to 0.80 mm dia For Hard Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.80 to 0.90 mm dia For Hard Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.90 to 1.00 mm dia For Hard Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 1.00 to 1.25 mm dia For Hard Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 1.25 to 1.40 mm dia For Hard Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 1.40 to 1.60 mm dia For Hard Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 1.60 to 1.80 mm dia For Hard Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 fo1.80 to 2.00 mm dia For Hard Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 2.00 to 2.24 mm dia For Hard Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 2.24 to 2.50 mm dia For Hard Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 2.50 to 2.80 mm dia For Hard Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.2.80 to 3.15 mm dia For Hard Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for3.15 to 3.55 mm dia For Hard Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 3.55 to 4.00 mm dia For Hard Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 4.00 to 5.00 mm dia For Hard Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 5.00 to 7.10 mm dia For Hard Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 7.10 to 10.00 mm dia For Hard Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 0.20 to 0.32 mm For Hard Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 0.32 to 0.40mm For Hard Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 0.40 to 0.50mm For Hard Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 0.50 to 0.56 mm For Hard Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 0.56 to 0.63 mm For Hard Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 0.63 to 0.71 mm For Hard Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 0.71 to 0.80 mm For Hard Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 0.80 to 0.90 mm)	-	9990	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 0.90 to 1.00 mm For Hard Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 1.00 to 1.25 mm For Hard Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 1.25 to1.40 mm For Hard Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 1.40 to1.60 mm For Hard Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 1.60 to 1.80 mm For Hard Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 1.80 to2.00 mm For Hard Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia2.00 to2.24 mm For Hard Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 2.24 to2.50 mm For Hard Core For Hard Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 2.50 to2.80 mm For Hard Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 2.80 to3.15 mm For Hard Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 3.15 to 3.55 mm For Hard Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 3.55 to 4.00 mm For Hard Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia4.00 to5.00 mm For Hard Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 5.00 to 7.10 mm For Hard Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 7.10 to10.00 mm For Hard Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.2 to 0.32 mm dia For Soft Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.32 to 0.40 mm dia For Soft Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.40 to 0.50 mm dia For Soft Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.50 to 0.56 mm dia For Soft Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.56 to 0.63 mm dia For Soft Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.63 to 0.71 mm dia For Soft Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.71 to 0.80 mm dia For Soft Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.80 to 0.90 mm dia For Soft Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.90 to 1.00 mm dia For Soft Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 1.00 to 1.25 mm dia For Soft Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 1.25 to 1.40 mm dia For Soft Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 1.40 to 1.60 mm dia For Soft Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 1.60 to 1.80 mm dia For Soft Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 fo1.80 to 2.00 mm dia)	-	9990	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 For 2.00 to 2.24 mm dia For Soft Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 2.24 to 2.50 mm dia For Soft Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 2.50 to 2.80 mm dia For Soft Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 2.80 to 3.15 mm dia For Soft Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for3.15 to 3.55 mm dia For Soft Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 3.55 to 4.00 mm dia For Soft Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 4.00 to 5.00 mm dia For Soft Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 5.00 to 7.10 mm dia For Soft Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 7.10 to 10.00 mm dia For Soft Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 0.20 to 0.32 mm For Soft Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 0.32 to 0.40mm For Soft Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 0.40 to 0.50mm For Soft Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 0.50 to 0.56 mm For Soft Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 0.56 to 0.63 mm For Soft Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 0.63 to 0.71 mm For Soft Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 0.71 to 0.80 mm For Soft Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 0.80 to 0.90 mm For Soft Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 0.90 to 1.00 mm For Soft Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 1.00 to 1.25 mm For Soft Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 1.25 to1.40 mm For Soft Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 1.40 to1.60 mm For Soft Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 1.60 to 1.80 mm For Soft Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 1.80 to2.00 mm For Soft Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia2.00 to2.24 mm For Soft Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 2.24 to2.50 mm For Soft Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 2.50 to2.80 mm For Soft Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 2.80 to3.15 mm For Soft Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 3.15 to 3.55 mm For Soft Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 3.55 to 4.00 mm For Soft Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia4.00 to5.00 mm For Soft Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 5.00 to 7.10 mm For Soft Core)	-	9990	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 7.10 to10.00 mm For Soft Core)	-	9990	-
11(a) Size)	-	9990	-
11(b) Construction)	-	9990	-
11(c) tensile designation)	-	9990	-
11(d) lay)	-	9990	-
11(e) coating)	-	9990	-
11(f) length)	-	9990	-
11( g) mass)	-	9990	-
11(h) manufacturer's name or trade mark)	-	9990	-
11(i) lot number along with the order number)	-	9990	-
11(j) BIS Standards Mark)	-	9990	-
5(a) Grade)	-	9990	-
5(b) Tensile Grade)	-	9990	-
6(a) Lay)	-	9990	-
6(b) Construction)	-	9990	-
7(Freedom from defects)	-	9990	-
9(a) Tensile)	-	9990	-
9(b) Elongation)	-	9990	-
9(c) Galvanizing Test)	-	9990	-
11(a) Size)	-	9990	-
11(b) Construction)	-	9990	-
11(c) tensile designation)	-	9990	-
11(d) lay)	-	9990	-
11(e) coating)	-	9990	-
11(f) length)	-	9990	-
11( g) mass)	-	9990	-
11(h) manufacturer's name or trade mark)	-	9990	-
11(i) lot number along with the order number)	-	9990	-
11(j) BIS Standards Mark)	-	9990	-
5(a) Grade)	-	9990	-
5(b) Tensile Grade)	-	9990	-
6(a) Lay)	-	9990	-
6(b) Construction)	-	9990	-
7(Freedom from defects)	-	9990	-
9(a) Tensile)	-	9990	-
9(b) Elongation)	-	9990	-
9(c) Galvanizing Test)	-	9990	-
11(a) Size)	-	9990	-
11(b) Construction)	-	9990	-
11(c) tensile designation)	-	9990	-
11(d) lay)	-	9990	-
11(e) coating)	-	9990	-
11(f) length)	-	9990	-
11( g) mass)	-	9990	-
11(h) manufacturer's name or trade mark)	-	9990	-
11(i) lot number along with the order number)	-	9990	-
11(j) BIS Standards Mark)	-	9990	-
5(a) Grade)	-	9990	-
5(b) Tensile Grade)	-	9990	-
6(a) Lay)	-	9990	-
6(b) Construction)	-	9990	-
7(Freedom from defects)	-	9990	-
9(a) Tensile)	-	9990	-
9(b) Elongation)	-	9990	-
9(c) Galvanizing Test)	-	9990	-
CL 8.2(AVG single wire dia (08))	-	9990	-

27 May, 2028

-
-

593

URS PRODUCTS AND TESTING PVT. LTD. (A29), NOIDA

8168906

IS 16046 : Part 2 (2018)

Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes ” Safety Requirements for Portable Sealed Secondary Cells and for Batteries Made from Them for Use in Portable Applications Part 2 Lithium Systems ( Second Revision )

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Parameter Measurement Tolerances)	-	1000	-
5(General Safety Considerations)	-	1000	-
5.1(General)	-	1000	-
5.2(Insulation and Wiring)	-	2500	-
5.3(Venting)	-	1000	-
5.4(Temperature, Voltage and Current Management)	-	1000	-
5.5(Terminal Contacts)	-	1500	-
5.6(Assembly of Cells into batteries)	-	1000	-
5.7(Quality Plan)	-	1000	-
5.8(Battery Safety Components)	-	1000	-
6(Type Test and Sample Size)	-	1000	-
7(Specific requirements and tests)	-	1000	-
7.1(Charging procedure for test purposes)	-	5000	-
7.2(Intended Use)	-	5000	-
7.3(Reasonably foreseeable misuse)	-	2000	-
8(Information for safety)	-	1000	-
8.1(General)	-	1000	-
8.2(Small Cell and battery safety information)	-	1000	-
9(Marking)	-	1000	-
9.1(Cell Marking)	-	1000	-
9.2(Battery Marking)	-	1000	-
9.3(Caution for ingestion of small cells and batteries)	-	1000	-
9.4(Other information)	-	1000	-
10(Packaging)	-	1000	-
clause 7.3.1 of IS 16047: Part 3(Discharge performance at 20 °C (rated capacity))	-	30000	-

-
included w.e.f 01.04.2026

594

Nemko India (Test Lab) Pvt. Ltd., Faridabad

8138426

IS 302 : Part 2 : Sec 8 (2024)

Household and Similar Electrical Appliances âSafety Part 2 Particular Requirements Section 8 Shavers, Hair Clippers and Similar Appliances (First Revision)

240000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	2000	10% (Discount offered to BIS)
8(Protection against access to live parts)	-	4000	10% (Discount offered to BIS)
10(Power input and current)	-	5000	10% (Discount offered to BIS)
11(Heating)	-	5000	10% (Discount offered to BIS)
12(Charging of metal-ion batteries)	-	2000	10% (Discount offered to BIS
13.1 &13.2(Leakage current test)	-	2000	10% (Discount offered to BIS
13.1 &13.3(Electric strength test)	-	0	--
14(Transient overvoltages)	-	2000	10% (Discount offered to BIS
15(Moisture resistance)	-	10000	10% (Discount offered to BIS
15.3(Moisture resistance)	-	0	--
16.1 &16.2(Leakage current test)	-	3000	10% (Discount offered to BIS)
16.1 & 16.3(Electric strength test)	-	0	--
17(Overload protection of transformers and associated circuits)	-	2000	10% (Discount offered to BIS)
19.1 to 19.13, Table No. - 9(Abnormal operation)	-	9000	10% (Discount offered to BIS)
19.101(Abnormal operation)	-	0	--
20.1(Stability and mechanical hazards)	-	2000	10% (Discount offered to BIS)
20.2(Stability and mechanical hazards)	-	0	--
21(Mechanical strength)	-	2000	10% (Discount offered to BIS)
21.101(Mechanical strength)	-	0	--
21.102(Mechanical strength)	-	0	--
21.103(Mechanical strength)	-	0	--
23(Internal wiring)	-	2000	10% (Discount offered to BIS)
25("Supply connection and external flexible cords")	-	2000	10% (Discount offered to BIS)
26("Terminals for external conductors")	-	2000	10% (Discount offered to BIS)
27(Provision for earthing)	-	4000	10% (Discount offered to BIS)
28(Screws and connections)	-	2000	10% (Discount offered to BIS)
29("Clearances, creepage distances and solid insulation")	-	3000	10% (Discount offered to BIS)
30(Resistance to heat and fire)	-	8000	10% (Discount offered to BIS)
31(Resistance to rusting)	-	2000	10% (Discount offered to BIS)
19.11.4.1(Electrostatic discharges)	-	20000	10% (Discount offered to BIS)
19.11.4.2(Radiated fields)	-	40000	10% (Discount offered to BIS)
19.11.4.3(Fast transient bursts)	-	15000	10% (Discount offered to BIS)
19.11.4.4(Surge immunity test)	-	15000	10% (Discount offered to BIS)
19.11.4.5(Immunity to conducted discharges)	-	20000	10% (Discount offered to BIS)
19.11.4.6(Class 3 Voltage dips and interruptions)	-	20000	10% (Discount offered to BIS)
19.11.4.7(Harmonics)	-	40000	10% (Discount offered to BIS)
22(Construction)	-	4000	10% (Discount offered to BIS)
22.101(Construction)	-	0	--
22.102(Construction)	-	0	--
22.103(Construction)	-	0	--
7(Marking and instructions)	-	0	--
8(Protection against access to live parts)	-	0	--
10(Power input and current)	-	0	--
11(Heating)	-	0	--
12(Charging of metal-ion batteries)	-	0	--
13.1 &13.2(Leakage current test)	-	0	--
13.1 &13.3(Electric strength test)	-	0	--
14(Transient overvoltages)	-	0	--
15(Moisture resistance)	-	0	--
15.3(Moisture resistance)	-	0	--
16.1 &16.2(Leakage current test)	-	0	--
16.1 & 16.3(Electric strength test)	-	0	--
17(Overload protection of transformers and associated circuits)	-	0	--
19.1 to 19.13, Table No. - 9(Abnormal operation)	-	0	--
19.101(Abnormal operation)	-	0	--
20.1(Stability and mechanical hazards)	-	0	--
20.2(Stability and mechanical hazards)	-	0	--
21(Mechanical strength)	-	0	--
21.101(Mechanical strength)	-	0	--
21.102(Mechanical strength)	-	0	--
21.103(Mechanical strength)	-	0	--
23(Internal wiring)	-	0	--
25("Supply connection and external flexible cords")	-	0	--
26("Terminals for external conductors")	-	0	--
27(Provision for earthing)	-	0	--
28(Screws and connections)	-	0	--
29("Clearances, creepage distances and solid insulation")	-	0	--
30(Resistance to heat and fire)	-	0	--
31(Resistance to rusting)	-	0	--
19.11.4.1(Electrostatic discharges)	-	0	--
19.11.4.2(Radiated fields)	-	0	--
19.11.4.3(Fast transient bursts)	-	0	--
19.11.4.4(Surge immunity test)	-	0	--
19.11.4.5(Immunity to conducted discharges)	-	0	--
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	--
19.11.4.7(Harmonics)	-	0	--
22(Construction)	-	0	--
22.101(Construction)	-	0	--
22.102(Construction)	-	0	--
22.103(Construction)	-	0	--

31 Dec, 2026

-
Included w.e.f 08.04.2026 Exclusion: 24 (Components), 32 ("Radiation, toxicity and similar hazards"), 22.16 Automatic cord reels test, 22.32 Oxygen bomb based test

595

QUALITY INTERNATIONAL RESEARCH & LABORATORIES PRIVATE LIMITED

5197006

IS 1079 (2017)

Hot rolled carbon steel sheet, plate and strip - Specification (Seventh Revision)

Hot Rolled Carbon Steel Sheet, Plate and Strip

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(UTM)	-	2500	-
Cl 9(Press)	-	500	-
Cl 10(Die Press)	-	500	-
Cl 12(Workmanship)	-	500	-
Cl 13(Length, Width & Thickness)	-	500	-
Cl 8(UTM)	-	2500	-
Cl 9(Press)	-	500	-
Cl 10(Die Press)	-	500	-
Cl 12(Workmanship)	-	500	-
Cl 13(Length, Width & Thickness)	-	500	-
Cl 8(UTM)	-	2500	-
Cl 9(Press)	-	500	-
Cl 10(Die Press)	-	500	-
Cl 12(Workmanship)	-	500	-
Cl 13(Length, Width & Thickness)	-	500	-
6.1(Carbon %)	-	500	-
6.1(Manganese %)	-	500	-
6.1(Phosphorus %)	-	500	-
6.1(Sulphur %)	-	500	-
6.1(Silicon %)	-	500	-
6.1( Copper %)	-	500	-
6.1( Aluminium %)	-	500	-
6.1( Nb)	-	500	-
6.1(V)	-	500	-
6.1( Ti)	-	500	-
6.1(Cr)	-	500	-
6.1(Mo)	-	500	-
6.1(Ni)	-	500	-
6.1( Nitrogen%)	-	2500	-
6.1(Microalloying)	-	2500	-
6.1(Carbon %)	-	500	-
6.1(Manganese %)	-	500	-
6.1(Phosphorus %)	-	500	-
6.1(Sulphur %)	-	500	-
6.1(Silicon %)	-	500	-
6.1( Copper %)	-	500	-
6.1( Aluminium %)	-	500	-
6.1( Nb)	-	500	-
6.1(V)	-	500	-
6.1( Ti)	-	500	-
6.1(Cr)	-	500	-
6.1(Mo)	-	500	-
6.1(Ni)	-	500	-
6.1( Nitrogen%)	-	2500	-
6.1(Microalloying)	-	2500	-
6.1(Carbon %)	-	500	-
6.1(Manganese %)	-	500	-
6.1(Phosphorus %)	-	500	-
6.1(Sulphur %)	-	500	-
6.1(Silicon %)	-	500	-
6.1( Copper %)	-	500	-
6.1( Aluminium %)	-	500	-
6.1( Nb)	-	500	-
6.1(V)	-	500	-
6.1( Ti)	-	500	-
6.1(Cr)	-	500	-
6.1(Mo)	-	500	-
6.1(Ni)	-	500	-
6.1( Nitrogen%)	-	2500	-
6.1(Microalloying)	-	2500	-
Cl.13(Out of square)	-	500	-
Cl.13(Flatness)	-	500	-
Cl.13(Camber)	-	500	-
Cl.13(Width)	-	500	-
Cl.13(Thickness)	-	500	-
Cl. 8.3, Cl. 8.3.1 Table 5 and Table 6(Percentage Elongation After Fracture at 5.65√A Gauge length)	-	500	-
Cl. 8.3, Cl. 8.3.1 Table 5 and Table 6(Percentage Elongation After Fracture at 80 mm Gauge length)	-	500	-
Cl. 8.3, Cl. 8.3.1 Table 5 and Table 6(Percentage Elongation After Fracture at 50 mm Gauge length)	-	500	-
Cl. 8.3, Cl. 8.3.1 Table 6(0.2% Proof Stress/Yield Stress)	-	500	-
Cl 13(Length, Width & Thickness)	-	500	-
Cl 12(Workmanship)	-	500	-
Cl 10(Die Press)	-	500	-
Cl 9(Press)	-	500	-
Cl 8(UTM)	-	2500	-
7(Material Test)	-	2500	-
9(Bend test)	-	500	-
14(Calculation of weight)	-	500	-
Cl 8(UTM)	-	2500	-
Cl 9(Press)	-	500	-
Cl 10(Die Press)	-	500	-
Cl 12(Workmanship)	-	500	-
Cl 13(Length, Width & Thickness)	-	500	-
8, Table 5 & 6(Tensile Strength)	-	1000	-
8, Table 5 & 6(Yield Strength)	-	1000	-
8, Table 5 & 6(Elongation)	-	1000	-
Clause 10(Cuppping Test)	-	1000	-
Clause 12(Freedom from defect)	-	500	-
Clause 13(Length)	-	500	-
Clause 7, Table 3, Note 1(Any Instrumental Method/Chemical Method)	-	500	-
Clause 7, Table 3, Note 1(By Calculation)	-	500	-
8, Table 5 & 6(Tensile Strength)	-	1000	-
8, Table 5 & 6(Yield Strength)	-	1000	-
8, Table 5 & 6(Elongation)	-	1000	-
Clause 10(Cuppping Test)	-	1000	-
Clause 12(Freedom from defect)	-	500	-
Clause 13(Length)	-	500	-
Clause 7, Table 3, Note 1(Boron)	-	500	-
Clause 7, Table 3, Note 1(B+Ti+Nb+V)	-	2000	-
16(Marking and packing)	-	500	-
8, Table 5 & 6(IS 1608 Part 1)	-	2500	-
8, Table 5 & 6(IS 1608 Part 1)	-	2500	-
8, Table 5 & 6(IS 1608 Part 1)	-	2500	-
Clause 10(IS 10175)	-	500	-
Clause 12(IS 1079)	-	1000	-
Clause 13(IS/ISO 16160)	-	500	-
Clause 7, Table 3, Note 1(Boron)	-	500	-
Clause 7, Table 3, Note 1(B+Ti+Nb+V)	-	2000	-
Cl. 7.1, table 3(Aluminium)	-	500	-
Cl. 7.1, table 3(Niobium)	-	500	-
Cl. 7.1, table 3(Vanadium)	-	500	-
Cl. 7.1, table 3(Titanium)	-	500	-
Cl. 7.1, table 3(Boron)	-	500	-
Cl. 7.1, table 3(Silicon)	-	500	-
Cl. 7.1, table 3(Nitrogen)	-	2500	-
Cl. 7.1, table 3(Copper)	-	500	-
Cl. 7.1, table 3(Total microalloying elements(Nb+V+Ti+B))	-	2500	-

-
Included w.e.f 16.03.2026

596

Stellar Test House, Noida

8171606

IS 302 : PART 1 (Surface-Cleaning Appliances for Household use Employing Liquids or Steam)

Surface-Cleaning Appliances for Household use Employing Liquids or Steam

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classifications)	-	500	-
5(General conditions for tests)	-	500	-
4(General Requirement)	-	500	-
11.8(Temperature rise)	-	1000	-
11.7(Duration corresponding)	-	1000	-
11.6(Combined appliances)	-	1000	-
11.5(Motor-operated appliances)	-	1000	-
11.4(Heating appliances)	-	1000	-
8.1.5(Live parts of built-in appliances)	-	1000	-
18(Endurance)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
16(Leakage current and electric strength)	-	1000	-
4(General requirement)	-	500	-
32(Radiation Toxicity and Similar Hazards)	-	1000	-
31(Resistance to Rusting)	-	1000	-
23(General)	-	1000	-
30.2(Needle Flame Test)	-	1000	-
30.2(Glow Wire Test)	-	1000	-
30.1(Ball pressure test)	-	1000	-
29(clearance, creepage distances and solid insulation)	-	1000	-
28(Screw test and connections)	-	1000	-
27(Provision for earthing)	-	1000	-
26(Terminals for external conductors)	-	1000	-
25(Supply connection and external flexible cords)	-	1000	-
24(Components)	-	1000	-
22(Construction verification related test)	-	1000	-
21(Mechanical Strength Test)	-	1000	-
20(Stability test)	-	1000	-
19(Abnormal Operation)	-	1000	-
18(Endurance Test requirements and tests)	-	1000	-
17(Over Load Protection of Transformers and associated circuits)	-	1000	-
16.3(Electric Strength (after clause 15 and 16.2))	-	1000	-
16.2(Leakage Current (after Clause 15))	-	1000	-
16.1(General)	-	1000	-
16.0(General)	-	1000	-
15.3(Humidity Test)	-	1000	-
15.2(Spillage Test)	-	1000	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	1000	-
15.0(General)	-	1000	-
14(Transient Over Voltages)	-	1000	-
13.3(Electric Strength at operating temperature)	-	1000	-
13.2(Leakage current at operating temperature)	-	1000	-
13.1(General)	-	1000	-
11.3(Heating)	-	1000	-
11.2(General)	-	1000	-
11.1(General)	-	1000	-
10.2(Current input)	-	1000	-
10.1(Power input)	-	1000	-
9(Starting of motor operation test requirements and tests)	-	1000	-
8.1.4(Protection against live parts against protective impedance)	-	1000	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	1000	-
8.1.2(Protection against live parts in openings)	-	1000	-
8.1.1(Protection against live parts in all positions)	-	1000	-
7(Marking and instructions)	-	500	-

26 Sep, 2028

-
"1 19.11.4.7 (Harmonics) EMI/EMC Test Test facilities not available 2 19.11.4.6 (Class 3 Voltage dips and interruptions) EMI/EMC Test Test facilities not available 3 19.11.4.5 (Immunity to conducted discharges) EMI/EMC Test Test facilities not available 4 19.11.4.4 (Surge immunity test) EMI/EMC Test Test facilities not available 5 19.11.4.3 (Fast transient bursts) EMI/EMC Test Test facilities not available 6 19.11.4.2 (Radiated fields) EMI/EMC Test Test facilities not available 7 19.11.4.1 (Electrostatic discharges) EMI/EMC Test Test facilities not available"

597

Shri Krishna Test House

8122336

IS 21 (2025)

Wrought Aluminium and Aluminium Alloys for Manufacture of Utensils - Specification (Fifth Revision)

ALL

70000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General requirements)	-	500	-
Cl-5.1(Material)	-	6000	-
Cl-5.2(Chemical composition and mechanical properties of grades in Cl 5.1)	-	6500	-
Cl-5.3.1 a("Wrought Aluminium (with Minimum 99 Percent Al Content)- Iron+ Silicon")	-	1000	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Chromium")	-	1000	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Magnesium")	-	1000	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Manganese")	-	1000	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Nickel")	-	1000	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Zinc")	-	1000	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Titanium")	-	1000	-
Cl-5.3.1 b("Wrought Aluminium (with Minimum 99 Percent Al Content)- Tin")	-	1000	-
Cl-5.3.1 c("Wrought Aluminium (with Minimum 99 Percent Al Content)- Copper")	-	1000	-
Cl-5.3.1 Note 1("Wrought Aluminium (with Minimum 99 Percent Al Content)- Aluminium")	-	1000	-
Cl-5.3.1 d("Wrought Aluminium (with Minimum 99 Percent Al Content)- Others")	-	1000	-
Cl-5.3.2, Table-1 (i)(Wrought Aluminium Alloys-Silicon)	-	1000	-
Cl-5.3.2, Table-1 (ii)(Wrought Aluminium Alloys-Iron)	-	800	-
Cl-5.3.2, Table-1 (iii)(Wrought Aluminium Alloys-Copper)	-	800	-
Cl-5.3.2, Table-1 (iv)(Wrought Aluminium Alloys-Manganese)	-	800	-
Cl-5.3.2, Table-1 (v)(Wrought Aluminium Alloys-Magnesium)	-	800	-
Cl-5.3.2, Table-1 (vi)(Wrought Aluminium Alloys-Chromium)	-	800	-
Cl-5.3.2, Table-1 (vii)(Wrought Aluminium Alloys-Nickel)	-	800	-
Cl-5.3.2, Table-1 (viii)(Wrought Aluminium Alloys-Zinc)	-	800	-
Cl-5.3.2, Table-1 (ix)(Wrought Aluminium Alloys -Zirconium)	-	1500	-
Cl-5.3.2, Table-1 (x)(Wrought Aluminium Alloys - Titanium)	-	600	-
Cl-5.3.2, Table-1 (Note 3)(Wrought Aluminium Alloys- Aluminium)	-	1000	-
Cl-5.3.2, Table-1 (xi)(Wrought Aluminium Alloys- Others)	-	1000	-
Cl 5.4(Lead)	-	800	-
Cl 5.4(Cadmium)	-	800	-
Cl 5.4(Arsenic)	-	800	-
Cl-7(Dimension)	-	500	-
Cl-8(EARING TEST (OPTIONAL TEST))	-	2000	-
Cl-5.2, (Cl-8,Table 2 of IS 737)(0.2% Proof Stress)	-	2500	-
Cl-5.2, (Cl-8,Table 2 of IS 737)(Tensile Strength)	-	2500	-
Cl-5.2, (Cl-8,Table 2 of IS 737)(Elongation)	-	1500	-
Cl-5.2, (Cl-8,Table 2 of IS 737)(Bend Test)	-	3000	-

05 Oct, 2028

-
Included w.e.f 09.03.2026

598

Shri Krishna Test House

8122336

IS 733 (2025)

Wrought Aluminium and Aluminium Alloy Bars, Rods, Sections, Extruded Tube, Hollow Sections and Profiles for General Engineering Purposes ? Specification (Fourth Revision)

All

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6 Table 1 - Table 8(Sodium)	-	500	-
Cl. 6 Table 1 - Table 8(Strontium)	-	500	-
Cl. 6 Table 1 - Table 8(Antimony)	-	500	-
Cl. 6 Table 1 - Table 8(Phosphorus)	-	500	-
Cl. 6 Table 1 - Table 8(Zirconium +Titanium)	-	500	-
Cl-4(General requirements)	-	500	-
Cl-6.1, Table-1 to 8(Fe)	-	500	-
Cl-6.1, Table-1 to 8(Cu)	-	500	-
Cl-6.1, Table-1 to 8(Mn)	-	500	-
Cl-6.1, Table-1 to 8(Mg)	-	500	-
Cl-6.1, Table-1 to 8(Cr)	-	500	-
Cl-6.1, Table-1 to 8(Zn)	-	500	-
Cl-6.1, Table-1 to 8(Ti)	-	500	-
Cl-6.1, Table-1 to 8(V)	-	500	-
Cl-6.1, Table-1 to 8(Aluminium)	-	500	-
Cl-6.2(chemical analysis)	-	4000	-
Cl-7.1, 7.2 & 7.3, Table-9(Dimensions)	-	500	-
Cl-7.1, 7.2 & 7.3, Table-9(Rm MPa)	-	500	-
Cl-7.1, 7.2 & 7.3, Table-9(Rp0.2 MPa)	-	500	-
Cl-7.1, 7.2 & 7.3, Table-9(Elongation , Percent)	-	1500	-
Cl-9(Dimensions and Tolerances)	-	500	-
Cl-12(Packaging and Marking)	-	100	-
Cl-7.1(Tensile test)	-	2500	-
Cl-5(Freedom from Defects)	-	500	-
Cl-6.1, Table-1 to 8(Si)	-	500	-

05 Oct, 2028

-
Included w.e.f 09.03.2026

599

QUALITY INTERNATIONAL RESEARCH & LABORATORIES PRIVATE LIMITED

5197006

IS 10748 (2025)

Hot-Rolled Steel Strip for Welded Tubes and Pipes - Specification ( Third Revision)

Hot Rolled Steel Strips

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(Supply of Materials)	-	500	-
Cl-6(Manufacture)	-	500	-
Cl-7.1(Ladle Analysis)	-	2500	-
Cl-7.2(Product Analysis)	-	2500	-
Cl-7.3(Carbon Equivalent Value)	-	500	-
Cl-8.1(Number of Tensile Tests)	-	2500	-
Cl-8.2(Tensile Test Pieces)	-	1000	-
Cl-8.3(Tensile Test)	-	2500	-
Cl-8.3, Table-5 & 6(Tensile Strength, MPa)	-	1000	-
Cl-8.3, Table-5 & 6(Yield Strength, MPa)	-	1000	-
Cl-8.3, Table-5 & 6(Internal Diameter of Bend)	-	500	-
Cl-9.1(Number of Bend Tests)	-	500	-
Cl-9.2(Bend test)	-	500	-
Cl-10(Re- Tests)	-	12500	-
Cl-11(freedam from Defects)	-	500	-
Cl-12(Dimensions)	-	500	-
Cl-13(Tolerances)	-	500	-
Cl-14(Calculation of Mass)	-	500	-
Cl-16(Marking)	-	500	-
Cl-7.1, 7.2, 7.3 & 7.4(Carbon)	-	500	-
Cl-7.1, 7.2, 7.3 & 7.4(Manganese)	-	500	-
Cl-7.1, 7.2, 7.3 & 7.4(Sulphur)	-	500	-
Cl-7.1, 7.2, 7.3 & 7.4(Phosphorus)	-	500	-
Cl-7.1, 7.2, 7.3 & 7.4(Carbon Equivalent Value (CEV))	-	500	-
Cl-7.1, 7.2, 7.3 & 7.4(silicon)	-	500	-
Cl-7.1, 7.2, 7.3 & 7.4(aluminium)	-	500	-
Cl-7.1, 7.2, 7.3 & 7.4(total aluminium)	-	500	-
Cl-7.1, 7.2, 7.3 & 7.4(Niobium)	-	500	-
Cl-7.1, 7.2, 7.3 & 7.4(Vanadium)	-	500	-
Cl-7.1, 7.2, 7.3 & 7.4(Titanium)	-	500	-
Cl-7.1, 7.2, 7.3 & 7.4(Nitrogen)	-	2500	-
Cl-7.1, 7.2, 7.3 & 7.4(Copper)	-	500	-
Cl-7.1, 7.2, 7.3 & 7.4(Mo + Cr +W)	-	1500	-
Cl-7.1, 7.2, 7.3 & 7.4(Mo)	-	500	-
Cl-7.1, 7.2, 7.3 & 7.4(Boron)	-	500	-
Cl-7.1, 7.2, 7.3 & 7.4(Nickel)	-	500	-
Cl-7.1, 7.2, 7.3 & 7.4(Chromium)	-	500	-
Cl-8.3, Table-5 & 6(Elongation at Gauge Length,)	-	1000	-

-
included w.e.f 09.03.2026

600

Shri Krishna Test House

8122336

IS 1285 (2023)

WROUGHT ALUMINIUM AND ALUMINIUM ALLOYS EXTRUDED ROUND TUBE AND HOLLOW SECTIONS FOR GENERAL ENGINEERINGPURPOSES SPECIFICATION

All

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.9.1(Aluminium- IS 504 and its parts or any other intrumental/chemical methods)	-	500	-
Cl.9.1(Copper- IS 504 and its parts or any other intrumental/chemical methods)	-	500	-
Cl.9.1(Magnesium- IS 504 and its parts or any other intrumental/chemical methods)	-	500	-
Cl.9.1(Silicon- IS 504 and its parts or any other intrumental/chemical methods)	-	500	-
Cl.9.1(Iron- IS 504 and its parts or any other intrumental/chemical methods)	-	500	-
Cl.9.1(Manganese- IS 504 and its parts or any other intrumental/chemical methods)	-	500	-
Cl.9.1(Zinc- IS 504 and its parts or any other intrumental/chemical methods)	-	500	-
Cl.9.1(Titanium and/ or other grain refining elements- IS 504 and its parts or any other intrumental/chemical methods)	-	500	-
Cl.9.1(Chromium- IS 504 and its parts or any other intrumental/chemical methods)	-	500	-
Cl.9.1(Remarks (Ti+V) - IS 504 and its parts or any other intrumental/chemical methods)	-	500	-
Cl.9.1(Remarks (Cr+Mn) - IS 504 and its parts or any other intrumental/chemical methods)	-	500	-
Cl.9.1(Remarks (Total Impurities)- IS 504 and its parts or any other intrumental/chemical methods)	-	500	-
6(FREEDOM FROM DEFECTS)	-	1000	-
8(DIMENSIONS AND TOLERANCES)	-	500	-
10(MECHANICAL PROPERTIES)	-	7000	-
Cl. 9(Aluminium)	-	500	-
Cl. 9(Copper)	-	500	-
Cl. 9(Magnesium)	-	500	-
Cl. 9(Silicon)	-	500	-
Cl. 9(Iron)	-	500	-
Cl. 9(Manganese)	-	500	-
Cl. 9(Zinc)	-	500	-
Cl. 9(Titanium and/or other grain refining elements)	-	500	-
Cl. 9(Chromium)	-	500	-
Cl. 9(Ti+V)	-	500	-
Cl. 9(Cr+Mn)	-	500	-
Clause-10(Tensile strength)	-	2500	-
Clauses 9.2(Ni)	-	500	-
Clauses 9.2(Pb)	-	500	-
Clauses 9.2(Sn)	-	500	-
Clauses 9.2(Ag)	-	1000	-
Clauses 9.2(Be)	-	500	-
Clauses 9.2(Zr)	-	1500	-
Clauses 9.2(Co)	-	500	-

05 Oct, 2028

-
Included w.e.f 09.03.2026

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number