BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15634 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

601

NATIONAL TEST HOUSE-SR (NTH), Chennai

6122704

IS 9758 (1981)

Specification for flush valves and fittings for water closets and urinals

29000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
cl 5(Manufacture & Construction)	-	2000	-
cl 6.1 to 6.3(Performance requirements)	-	9000	-
cl 7.1(Hydraulic pressure test)	-	3000	-
cl 7.2(Endurance test)	-	10000	-
cl 8(Finish)	-	5000	-
cl 5(Manufacture & Construction)	-	0	Repeat Test
cl 6.1 to 6.3(Performance requirements)	-	0	Repeat Test
cl 7.1(Hydraulic pressure test)	-	0	Repeat Test
cl 7.2(Endurance test)	-	0	Repeat Test
cl 8(Finish)	-	0	Repeat Test
cl 5(Manufacture & Construction)	-	0	Repeat Test
cl 6.1 to 6.3(Performance requirements)	-	0	Repeat Test
cl 7.1(Hydraulic pressure test)	-	0	Repeat Test
cl 7.2(Endurance test)	-	0	Repeat Test
cl 8(Finish)	-	0	Repeat Test

28 Nov, 2028

-
Included w.e.f 30.07.2026

602

National Test House (WR) - NTH, Mumbai

7107604

IS 3601 (2006)

Steel tubes for mechanical and general engineering purposes - Specification (Second Revision)

ALL TYPE GRADE

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Material)	-	2500	-
13(Mechanical Testing)	-	3000	-
6.0(Workmanship)	-	1000	-
4.1(Sulphur-Percentage by mass)	-	500	-
4.1(Phosphorus-Percentage by mass)	-	500	-
8.0(Straightness)	-	1000	-
19.1.1, 24.1.1, 28.1.1, 33.1.1(Dimensions- Outside Dia)	-	1000	-
19.1.2, 24.1.2, 28.1.2, 33.1.2(Dimensions- Thickness)	-	1000	-
11.1(Surface Protection)	-	1000	-
11.2(Surface Protection)	-	1000	-
13.1.3(Tensile Strength)	-	1000	-
13.1.1(Yield Stress)	-	1000	-
13.1.2(Elongation)	-	1000	-
13.2(Flattening Test)	-	1500	-
13.3(Bend Test (Strip))	-	1500	-
13.4(Bend Test (Whole Tube))	-	1500	-
13.5(Drift Expansion Test)	-	1500	-
13.6(Crush Test)	-	1500	-
19.1.3(Height of Internal Fin)	-	1000	-
6.0(Workmanship)	-	1000	-
4.1(Sulphur-Percentage by mass)	-	500	-
4.1(Phosphorus-Percentage by mass)	-	500	-
8.0(Straightness)	-	1000	-
19.1.1, 24.1.1, 28.1.1, 33.1.1(Dimensions- Outside Dia)	-	1000	-
19.1.2, 24.1.2, 28.1.2, 33.1.2(Dimensions- Thickness)	-	1000	-
11.1(Surface Protection)	-	1000	-
11.2(Surface Protection)	-	1000	-
13.1.3(Tensile Strength)	-	1000	-
13.1.1(Yield Stress)	-	1000	-
13.1.2(Elongation)	-	1000	-
13.2(Flattening Test)	-	1500	-
13.3(Bend Test (Strip))	-	1500	-
13.4(Bend Test (Whole Tube))	-	1500	-
13.5(Drift Expansion Test)	-	1500	-
13.6(Crush Test)	-	1500	-
19.1.3(Height of Internal Fin)	-	1500	-
Cl. 10 Annex B Cl. 17, Cl. 19(Moment of inertia)	-	1000	-
Cl. 10 Annex B Cl. 17, Cl. 19(Radius of gyration)	-	1000	-
Cl. 10 Annex B Cl. 17, Cl. 19(Modulus of section)	-	1000	-
Cl. 10 Annex B Cl. 17, Cl. 19(Area of cross section)	-	1000	-
Cl. 19.1.3(Internal Fin Height)	-	1000	-
Cl. 10 Annex B Cl. 17, Cl. 19(Mass)	-	1000	-
Cl. 9(Length)	-	1000	-
4.0 (a)(Carbon as C - IS:8811)	-	500	-
4.0 (b)(Manganese as Mn - IS:8811)	-	500	-
4.0 (b)(Manganese as Mn - IS:8811)	-	500	-
4.0 (c)(Micro Alloying elements (Nb+V+Ti))	-	500	-
4.0 (f)(Nitrogen content)	-	500	-
9(Length -SOP MT-23)	-	1000	-
10(Outside diameter-SOP MT-23)	-	1000	-
10(Thickness - SOP MT-23)	-	1000	-
10(Mass of Tube-SOP MT-23)	-	1000	-
10(Area of Cross Section)	-	1000	-
16(Marking)	-	0	-
CL 10("1.Outer dia (04) 2.Thickness (08)")	-	1000	-
CL 10(Minimum Outer dia (04))	-	1000	-
CL 10(Maximum Outer dia (04))	-	1000	-
Cl-10(" Minimum Thickness (08)")	-	1000	-
CL 10(Maximum Thickness (08))	-	1000	-

-
-

603

National Test House (WR) - NTH, Mumbai

7107604

IS 6603 (2024)

Stainless Steel Semi-Finished Products, Bars, Wire Rods and Bright Bars â Specification (Second Revision)

All Grades

29000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl - 9.1,9.5,13.2(Thickness or Diameter)	-	1000	-
Cl - 9.1,9.5,13.2(Proof Strength Rp 0.2 MP)	-	1000	-
Cl - 9.1,9.5,13.2(Proof Strength Rp 1.0 MP)	-	1000	-
Cl - 9.1,9.5,13.2(Tensile Strength)	-	1000	-
Cl - 9.1,9.5,13.2(Elongation After Fracture Long.)	-	1000	-
Cl - 9.1,9.5,13.2(Elongation After Fracture Tr.)	-	1000	-
Cl - 9.1,9.5,13.2(Impact Energy (ISO-V) Long.)	-	5000	-
Cl - 9.1,9.5,13.2(Impact Energy (ISO-V) Tr.)	-	5000	-
Cl - 9.1,9.5,13.2(Resistance to Inter-Granular Corrosion in the Delivery Condition)	-	10000	-
Cl - 9.1,9.5,13.2(Resistance to Inter-Granular Corrosion in the Sensitized Condition)	-	10000	-
Cl - 9.1,9.5,13.2(Hardness)	-	1500	-
Cl - 9.1,9.5,13.2(Elongation After Fracture)	-	1000	-
Cl - 9.1,9.5,13.2(Impact Energy (ISO-V))	-	5000	-
Cl - 9.1,9.3,9.4,9.5,13.2(Thickness or Diameter)	-	1000	-
Cl - 9.1,9.3,9.4,9.5,13.2(R MPa Max(Annealed))	-	1000	-
Cl - 9.1,9.3,9.4,9.5,13.2(Hardness HB Max(Annealed))	-	1500	-
Cl - 9.1,9.3,9.4,9.5,13.2(Heat Treatment Condition (Quenched + Tempered))	-	2500	-
Cl - 9.1,9.3,9.4,9.5,13.2(R 0.2 MPa Min(Quenched + Tempered))	-	1000	-
Cl - 9.1,9.3,9.4,9.5,13.2(R Mpa(Quenched + Tempered))	-	1000	-
Cl - 9.1,9.3,9.4,9.5,13.2(A Percent Min Long.(Quenched + Tempered))	-	1000	-
Cl - 9.1,9.3,9.4,9.5,13.2(A Percent Min Tr.(Quenched + Tempered))	-	1000	-
Cl - 9.1,9.3,9.4,9.5,13.2(KV J Min Long.(Quenched + Tempered))	-	1000	-
Cl - 9.1,9.3,9.4,9.5,13.2(KV J Min Long.(Quenched + Tempered))	-	1000	-
Cl - 9.1,9.3,9.4,9.5,13.2(Thickness or Diameter)	-	1000	-
Cl - 9.1,9.3,9.4,9.5,13.2(R MPa Max(Annealed))	-	1000	-
Cl - 9.1,9.3,9.4,9.5,13.2(Hardness HB Max(Annealed))	-	1500	-
Cl - 9.1,9.3,9.4,9.5,13.2(Heat Treatment Condition (Quenched + Tempered))	-	2500	-
Cl - 9.1,9.3,9.4,9.5,13.2(R 0.2 MPa Min(Quenched + Tempered))	-	1000	-
Cl - 9.1,9.3,9.4,9.5,13.2(R Mpa(Quenched + Tempered))	-	1000	-
Cl - 9.1,9.3,9.4,9.5,13.2(A Percent Min Long.(Quenched + Tempered))	-	1000	-
Cl - 9.1,9.3,9.4,9.5,13.2(A Percent Min Tr.(Quenched + Tempered))	-	1000	-
Cl - 9.1,9.3,9.4,9.5,13.2(KV J Min Long.(Quenched + Tempered))	-	1000	-
Cl - 9.1,9.3,9.4,9.5,13.2(KV J Min Long.(Quenched + Tempered))	-	1000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 100 Deg. C)	-	2000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 150 Deg. C)	-	2000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 200 Deg. C)	-	2000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 250 Deg. C)	-	2000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 300 Deg. C)	-	2000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 350 Deg. C)	-	2000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 400 Deg. C)	-	2000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 450 Deg. C)	-	2000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 500 Deg. C)	-	2000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 550 Deg. C)	-	2000	-
Cl - 9.2(Minimum 1 Percent Proof Strength at 100 Deg. C.)	-	2000	-
Cl - 9.2(Minimum 1 Percent Proof Strength at 150 Deg. C.)	-	2000	-
Cl - 9.2(Minimum 1 Percent Proof Strength at 200 Deg. C.)	-	2000	-
Cl - 9.2(Minimum 1 Percent Proof Strength at 250 Deg. C.)	-	2000	-
Cl - 9.2(Minimum 1 Percent Proof Strength at 300 Deg. C.)	-	2000	-
Cl - 9.2(Minimum 1 Percent Proof Strength at 350 Deg. C.)	-	2000	-
Cl - 9.2(Minimum 1 Percent Proof Strength at 400 Deg. C.)	-	2000	-
Cl - 9.2(Minimum 1 Percent Proof Strength at 450 Deg. C.)	-	2000	-
Cl - 9.2(Minimum 1 Percent Proof Strength at 550 Deg. C.)	-	2000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 100 Deg. C)	-	2000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 150 Deg. C)	-	2000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 200 Deg. C)	-	2000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 250 Deg. C)	-	2000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 100 Deg. C)	-	2000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 150 Deg. C)	-	2000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 200 Deg. C)	-	2000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 250 Deg. C)	-	2000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 300 Deg. C)	-	2000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 350 Deg. C)	-	2000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 400 Deg. C)	-	2000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 100 Deg. C)	-	2000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 150 Deg. C)	-	2000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 200 Deg. C)	-	2000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 250 Deg. C)	-	2000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 300 Deg. C)	-	2000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 350 Deg. C)	-	2000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 400 Deg. C)	-	2000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 100 Deg. C)	-	2000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 150 Deg. C)	-	2000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 200 Deg. C)	-	2000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 250 Deg. C)	-	2000	-
Cl-7.1, 7.2(C)	-	500	-
Cl-7.1, 7.2(Si)	-	500	-
Cl-7.1, 7.2(Mn)	-	500	-
Cl-7.1, 7.2(P)	-	500	-
Cl-7.1, 7.2(S)	-	500	-
Cl-7.1, 7.2(Cr)	-	500	-
Cl-7.1, 7.2(Mo)	-	500	-
Cl-7.1, 7.2(Ni)	-	500	-
Cl-7.1, 7.2(N)	-	500	-
Cl-7.1, 7.2(Cu)	-	500	-
Cl-7.1, 7.2(Ti)	-	500	-
Cl-7.1, 7.2(W)	-	500	-
Cl-7.1, 7.2(Nb)	-	500	-
cL-7.1, 7.2(Co)	-	500	-
Cl-7.1, 7.2(Ti: (C + N))	-	500	-
Cl-7.1, 7.2(V)	-	500	-
Cl-7.1, 7.2(Al)	-	500	-
Cl-7.1, 7.2(Boron)	-	500	-
Cl-7.1, 7.2(Tungsten)	-	500	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1((Titanium- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.))	-	500	-
Cl 6((freedom from defects))	-	1000	-
Cl. 12((dimension and tolerance))	-	1000	-
Cl. 14((corrosion resistance))	-	10000	-

-
-

604

NATIONAL TEST HOUSE-SR (NTH), Chennai

6122704

IS 210 (2009)

Grey iron castings - Specification (First Revision)

All grades

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Chemical Composition(chemical composition shall be as agreed to between the purchaser and the manufacturer.))	-	1200	only phosphorus and Sulphur
7.1(WORKMANSHIP AND FINISH)	-	1000	-
10.1(FREEDOM FROM DEFECTS)	-	0	-
10.2(FREEDOM FROM DEFECTS)	-	0	-
13(SIZE OF TEST BARS-Diameter)	-	1500	-
13(SIZE OF TEST BARS-Length)	-	0	-
15, Table 3(TENSIL.E TEST- IS 1608 Part1 )	-	2500	-
16, Table 3(Hardness Test)	-	2000	-
17,Annex B(TRANSVERSE TEST)	-	3000	-
18(HYDROSTATIC TEST)	-	3000	-
6(Chemical Composition(chemical composition shall be as agreed to between the purchaser and the manufacturer.))	-	0	-
7.1(WORKMANSHIP AND FINISH)	-	0	-
10.1(FREEDOM FROM DEFECTS)	-	0	-
10.2(FREEDOM FROM DEFECTS)	-	0	-
13(SIZE OF TEST BARS-Diameter)	-	0	-
13(SIZE OF TEST BARS-Length)	-	0	-
17,Annex B(TRANSVERSE TEST)	-	0	-
15, Table 3(TENSIL.E TEST- IS 1608 Part1 )	-	0	-
16, Table 3(Hardness Test)	-	0	-
18(HYDROSTATIC TEST)	-	0	-
9(IS 7754)	-	2000	-
9(IS 7754)	-	0	-
9(Microstructure)	-	0	-
21(Marking)	-	0	-
9(Microstructure)	-	0	-
7.2(Casting dimensions)	-	0	-
Cl-6(Phosprorus (P) - IS 12308 ( P-5))	-	0	-
6(Chemical Composition(chemical composition shall be as agreed to between the purchaser and the manufacturer.))	-	0	-
7.1(WORKMANSHIP AND FINISH)	-	0	-
10.1(FREEDOM FROM DEFECTS)	-	0	-
10.2(FREEDOM FROM DEFECTS)	-	0	-
13(SIZE OF TEST BARS-Diameter)	-	0	-
13(SIZE OF TEST BARS-Length)	-	0	-
15, Table 3(TENSIL.E TEST- IS 1608 Part1 )	-	0	-
16, Table 3(Hardness Test)	-	0	-
17,Annex B(TRANSVERSE TEST)	-	0	-
18(HYDROSTATIC TEST)	-	0	-
6(Chemical Composition(chemical composition shall be as agreed to between the purchaser and the manufacturer.))	-	0	-
7.1(WORKMANSHIP AND FINISH)	-	0	-
10.1(FREEDOM FROM DEFECTS)	-	0	-
10.2(FREEDOM FROM DEFECTS)	-	0	-
13(SIZE OF TEST BARS-Diameter)	-	0	-
13(SIZE OF TEST BARS-Length)	-	0	-
17,Annex B(TRANSVERSE TEST)	-	0	-
15, Table 3(TENSIL.E TEST- IS 1608 Part1 )	-	0	-
16, Table 3(Hardness Test)	-	0	-
18(HYDROSTATIC TEST)	-	0	-
9(IS 7754)	-	0	-
9(IS 7754)	-	0	-
9(Microstructure)	-	0	-
21(Marking)	-	0	-
9(Microstructure)	-	0	-
7.2(Casting dimensions)	-	0	-
Cl-6(Phosprorus (P) - IS 12308 ( P-5))	-	0	-
6(Chemical Composition(chemical composition shall be as agreed to between the purchaser and the manufacturer.))	-	0	-
7.1(WORKMANSHIP AND FINISH)	-	0	-
10.1(FREEDOM FROM DEFECTS)	-	0	-
10.2(FREEDOM FROM DEFECTS)	-	0	-
13(SIZE OF TEST BARS-Diameter)	-	0	-
13(SIZE OF TEST BARS-Length)	-	0	-
15, Table 3(TENSIL.E TEST- IS 1608 Part1 )	-	0	-
16, Table 3(Hardness Test)	-	0	-
17,Annex B(TRANSVERSE TEST)	-	0	-
18(HYDROSTATIC TEST)	-	0	-
6(Chemical Composition(chemical composition shall be as agreed to between the purchaser and the manufacturer.))	-	0	-
7.1(WORKMANSHIP AND FINISH)	-	0	-
10.1(FREEDOM FROM DEFECTS)	-	0	-
10.2(FREEDOM FROM DEFECTS)	-	0	-
13(SIZE OF TEST BARS-Diameter)	-	0	-
13(SIZE OF TEST BARS-Length)	-	0	-
17,Annex B(TRANSVERSE TEST)	-	0	-
15, Table 3(TENSIL.E TEST- IS 1608 Part1 )	-	0	-
16, Table 3(Hardness Test)	-	0	-
18(HYDROSTATIC TEST)	-	0	-
9(IS 7754)	-	0	-
9(IS 7754)	-	0	-
9(Microstructure)	-	0	-
21(Marking)	-	0	-
9(Microstructure)	-	0	-
7.2(Casting dimensions)	-	0	-
Cl-6(Phosprorus (P) - IS 12308 ( P-5))	-	0	-
6(Chemical Composition(chemical composition shall be as agreed to between the purchaser and the manufacturer.))	-	0	-
7.1(WORKMANSHIP AND FINISH)	-	0	-
10.1(FREEDOM FROM DEFECTS)	-	0	-
10.2(FREEDOM FROM DEFECTS)	-	0	-
13(SIZE OF TEST BARS-Diameter)	-	0	-
13(SIZE OF TEST BARS-Length)	-	0	-
15, Table 3(TENSIL.E TEST- IS 1608 Part1 )	-	0	-
16, Table 3(Hardness Test)	-	0	-
17,Annex B(TRANSVERSE TEST)	-	0	-
18(HYDROSTATIC TEST)	-	0	-
6(Chemical Composition(chemical composition shall be as agreed to between the purchaser and the manufacturer.))	-	0	-
7.1(WORKMANSHIP AND FINISH)	-	0	-
10.1(FREEDOM FROM DEFECTS)	-	0	-
10.2(FREEDOM FROM DEFECTS)	-	0	-
13(SIZE OF TEST BARS-Diameter)	-	0	-
13(SIZE OF TEST BARS-Length)	-	0	-
17,Annex B(TRANSVERSE TEST)	-	0	-
15, Table 3(TENSIL.E TEST- IS 1608 Part1 )	-	0	-
16, Table 3(Hardness Test)	-	0	-
18(HYDROSTATIC TEST)	-	0	-
9(IS 7754)	-	0	-
9(IS 7754)	-	0	-
9(Microstructure)	-	0	-
21(Marking)	-	0	-
9(Microstructure)	-	0	-
7.2(Casting dimensions)	-	0	-
Cl-6(Phosprorus (P) - IS 12308 ( P-5))	-	0	-

28 Nov, 2028

-
Included w.e.f. 30.07.2026

605

WELL TECH TEST AND RESEARCH CENTER, DERABASSI

9177306

IS 15392 (2003)

Aluminium and aluminium alloy bare foil for food packaging - Specification

AS PER TABLE 2,3,4 AND 5

9500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 5 Table 1(PINHOLE COUNT)	-	1000	-
Clause 6(FREEDOM FROM DEFECTS)	-	500	-
Clause 7 Sub-Clause 7.1(Material)	-	1000	-
Clause 7 Sub-Clause 7.2(Material)	-	0	-
Clause 10 Table 2(Preferred Thickness)	-	999.98	-
Clause 11(Average Thickness)	-	499.99	-
Clause 14(Surface condition)	-	999.99	-
Clause 12(Dimension and Tolerances: I) Width)	-	1999.99	-
Clause 12(Dimension and Tolerances: 2) Length)	-	1999.99	-
9(Lubricants)	-	499.99	-
13-(Table-5)(Tensile properties-IS 13237)	-	1999.99	-
7(Copper- IS 504)	-	250	-
7(Copper- IS 504)	-	250	-
7(Magnesium-IS 504)	-	250	-
7(Silicon- IS 504)	-	249.99	-
7(Iron-IS 504)	-	249.99	-
7(Manganese-IS 504)	-	250	-
7(Zinc-IS 504)	-	249.99	-
7(Titanium- IS 504)	-	249.99	-
7(Chromium- IS 504)	-	249.97	-
7(Cu+Si+Fe+Mn+Zn)	-	249.99	-
7(Cu+Mg+Si+Pe+Mn+Zn)	-	250	-
7(Cu+Mg+Si+Pe+Mn+Zn)	-	249.99	-

30 Mar, 2027

-
-

606

Samridhi Test House Pvt. Ltd.

8184706

IS 15351 (2015)

Agro textiles – Laminated high density polyethylene (HDPE) woven geomembrane for water proof lining – Specification (second revision)

208000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(HDPE Tapes)	-	500	-
3.2(HDPE Fabric)	-	500	-
5(MANUFACTURE)	-	500	-
5.1(Lamination)	-	500	-
5.2(Panel Width)	-	500	-
5.3(Joints/Seams)	-	500	-
5.1.1 and 6.2(Thickness, mm- IS 7016: Part 1)	-	500	-
5.1.1 and 6.2(Mass, g/sq m)	-	500	-
5.1.1 and 6.2(Dimensions, mm- Annexure A of IS 11652)	-	500	-
5.1.1 and 6.2(Length)	-	500	-
5.1.1 and 6.2(Width)	-	500	-
5.1.1 and 6.2(Carbon black content, Percent- IS 2530)	-	500	-
5.1.1 and 6.2(Breaking Load on 20 cm X 10 cm Strip, Min )	-	1000	-
5.1.1 and 6.2(Before UV exposure IS 13162 (Part 5)	-	1000	-
5.1.1 and 6.2(Strain at Maximum load, Percent-IS 13162 (Part 5)	-	1000	-
Table-1(Breaking load on 20 × 10 cm strip, N, Min after)	-	1000	-
5.1.1 and 6.2( U.V exposure of 1000 h for warp and weft)	-	95000	-
5.1.1 and 6.2(Impact failure load, at 1524 mm drop,)	-	500	-
5.1.1 and 6.2( Min, gram force at 50 percent failure-Annex C)	-	500	-
5.1.1 and 6.2(Tear resistance, N, Min-Method A1 of IS 7016 (Part 3))	-	500	-
5.1.1 and 6.2(Puncture resistance, N, Min-Annex D)	-	500	-
5.1.1 and 6.2(Bursting strength (Ball burst),N/cm², Min-)	-	1000	-
5.1.1 and 6.2(IS 7016 (Part 6))	-	1000	-
5.1.1 and 6.2(Seam strength before UV exposure (N/mm), Min-IS 15060)	-	1000	-
Table-1(Seam strength after UV exposure N/mm, Min-Annex B and IS 15060)	-	1000	-
5.1.1 and 6.2(Hydrostatic resistance-Annex E)	-	1000	-
Table-1(Hydrostatic resistance after UV exposure of 1000 h -Annex B and Annex E)	-	95000	-
5.1.1 and 6.2(Ash content, percent, Max-Annex F)	-	1000	-
3.1(HDPE Tapes)	-	0	-
3.2(HDPE Fabric)	-	0	-
5(MANUFACTURE)	-	0	-
5.1(Lamination)	-	0	-
5.2(Panel Width)	-	0	-
5.3(Joints/Seams)	-	0	-
5.1.1 and 6.2(Thickness, mm- IS 7016: Part 1)	-	0	-
5.1.1 and 6.2(Mass, g/sq m)	-	0	-
5.1.1 and 6.2(Dimensions, mm- Annexure A of IS 11652)	-	0	-
5.1.1 and 6.2(Length)	-	0	-
5.1.1 and 6.2(Width)	-	0	-
5.1.1 and 6.2(Carbon black content, Percent- IS 2530)	-	0	-
5.1.1 and 6.2(Breaking Load on 20 cm X 10 cm Strip, Min )	-	0	-
5.1.1 and 6.2(Before UV exposure IS 13162 (Part 5)	-	0	-
5.1.1 and 6.2(Strain at Maximum load, Percent-IS 13162 (Part 5)	-	0	-
Table-1(Breaking load on 20 × 10 cm strip, N, Min after)	-	0	-
5.1.1 and 6.2( U.V exposure of 1000 h for warp and weft)	-	0	-
5.1.1 and 6.2(Impact failure load, at 1524 mm drop,)	-	0	-
5.1.1 and 6.2( Min, gram force at 50 percent failure-Annex C)	-	0	-
5.1.1 and 6.2(Tear resistance, N, Min-Method A1 of IS 7016 (Part 3))	-	0	-
5.1.1 and 6.2(Puncture resistance, N, Min-Annex D)	-	0	-
5.1.1 and 6.2(Bursting strength (Ball burst),N/cm², Min-)	-	0	-
5.1.1 and 6.2(IS 7016 (Part 6))	-	0	-
5.1.1 and 6.2(Seam strength before UV exposure (N/mm), Min-IS 15060)	-	0	-
Table-1(Seam strength after UV exposure N/mm, Min-Annex B and IS 15060)	-	0	-
5.1.1 and 6.2(Hydrostatic resistance-Annex E)	-	0	-
Table-1(Hydrostatic resistance after UV exposure of 1000 h -Annex B and Annex E)	-	0	-
5.1.1 and 6.2(Ash content, percent, Max-Annex F)	-	0	-
3.1(HDPE Tapes)	-	0	-
3.2(HDPE Fabric)	-	0	-
5(MANUFACTURE)	-	0	-
5.1(Lamination)	-	0	-
5.2(Panel Width)	-	0	-
5.3(Joints/Seams)	-	0	-
5.1.1 and 6.2(Thickness, mm- IS 7016: Part 1)	-	0	-
5.1.1 and 6.2(Mass, g/sq m)	-	0	-
5.1.1 and 6.2(Dimensions, mm- Annexure A of IS 11652)	-	0	-
5.1.1 and 6.2(Length)	-	0	-
5.1.1 and 6.2(Width)	-	0	-
5.1.1 and 6.2(Carbon black content, Percent- IS 2530)	-	0	-
5.1.1 and 6.2(Breaking Load on 20 cm X 10 cm Strip, Min )	-	0	-
5.1.1 and 6.2(Before UV exposure IS 13162 (Part 5)	-	0	-
5.1.1 and 6.2(Strain at Maximum load, Percent-IS 13162 (Part 5)	-	0	-
Table-1(Breaking load on 20 × 10 cm strip, N, Min after)	-	0	-
5.1.1 and 6.2( U.V exposure of 1000 h for warp and weft)	-	0	-
5.1.1 and 6.2(Impact failure load, at 1524 mm drop,)	-	0	-
5.1.1 and 6.2( Min, gram force at 50 percent failure-Annex C)	-	0	-
5.1.1 and 6.2(Tear resistance, N, Min-Method A1 of IS 7016 (Part 3))	-	0	-
5.1.1 and 6.2(Puncture resistance, N, Min-Annex D)	-	0	-
5.1.1 and 6.2(Bursting strength (Ball burst),N/cm², Min-)	-	0	-
5.1.1 and 6.2(IS 7016 (Part 6))	-	0	-
5.1.1 and 6.2(Seam strength before UV exposure (N/mm), Min-IS 15060)	-	0	-
Table-1(Seam strength after UV exposure N/mm, Min-Annex B and IS 15060)	-	0	-
5.1.1 and 6.2(Hydrostatic resistance-Annex E)	-	0	-
Table-1(Hydrostatic resistance after UV exposure of 1000 h -Annex B and Annex E)	-	0	-
5.1.1 and 6.2(Ash content, percent, Max-Annex F)	-	0	-

-
-

607

WELL TECH TEST AND RESEARCH CENTER, DERABASSI

9177306

IS 210 (2009)

Grey iron castings - Specification (First Revision)

AS PER TABLE 3 AND CL 4

6000 View breakup
The testing charges quoted by the laboratory exceed 1.5 times the government-approved rate. Therefore, in accordance with LRS 2020, the testing charges are being capped at 1.5 times the BIS lab.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Chemical Composition(chemical composition shall be as agreed to between the purchaser and the manufacturer.))	-	749.99	-
7.1(WORKMANSHIP AND FINISH)	-	499.99	-
10.1(FREEDOM FROM DEFECTS)	-	999.99	-
10.2(FREEDOM FROM DEFECTS)	-	999.99	-
13(SIZE OF TEST BARS-Diameter)	-	499.99	-
13(SIZE OF TEST BARS-Length)	-	499.99	-
15, Table 3(TENSIL.E TEST- IS 1608 Part1 )	-	2000	-
16, Table 3(Hardness Test)	-	1999.99	-
17,Annex B(TRANSVERSE TEST)	-	1000	-
18(HYDROSTATIC TEST)	-	499.99	-
6(Chemical Composition(chemical composition shall be as agreed to between the purchaser and the manufacturer.))	-	0	-
7.1(WORKMANSHIP AND FINISH)	-	0	-
10.1(FREEDOM FROM DEFECTS)	-	0	-
10.2(FREEDOM FROM DEFECTS)	-	0	-
13(SIZE OF TEST BARS-Diameter)	-	0	-
13(SIZE OF TEST BARS-Length)	-	0	-
15, Table 3(TENSIL.E TEST- IS 1608 Part1 )	-	0	-
16, Table 3(Hardness Test)	-	0	-
17,Annex B(TRANSVERSE TEST)	-	0	-
18(HYDROSTATIC TEST)	-	0	-
9(IS 7754)	-	1999.98	-
9(IS 7754)	-	0	-
9(Microstructure)	-	1999.99	-
21(Marking)	-	250	-
9(Microstructure)	-	0	-
7.2(Casting dimensions)	-	499.99	-
Cl-6(Phosprorus (P) - IS 12308 ( P-5))	-	0	-

30 Mar, 2027

-
-

608

Standard Testing Laboratory Private Limited

8170106

IS 6911 (2026)

STAINLESS STEEL PLATE, SHEET AND STRIP - SPECIFICATION (Third revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(General requirements)	-	10000	-
Cl-5(Manufacture)	-	10000	-
Cl-5.3(Raw material)	-	10000	-
Cl-6(Freedom from Defects)	-	10000	-
Cl-7.1, 7.2 & 14.1, Table 1(C)	-	10000	-
Cl-7.1, 7.2 & 14.1, Table 1(Si)	-	10000	-
Cl-7.1, 7.2 & 14.1, Table 1(Mn)	-	10000	-
Cl-7.1, 7.2 & 14.1, Table 1(Ni)	-	10000	-
Cl-7.1, 7.2 & 14.1, Table 1(Cr)	-	10000	-
Cl-7.1, 7.2 & 14.1, Table 1(Mo)	-	10000	-
Cl-7.1, 7.2 & 14.1, Table 1(S)	-	10000	-
Cl-7.1, 7.2 & 14.1, Table 1(P)	-	10000	-
Cl-7.1, 7.2 & 14.1, Table 1(N)	-	10000	-
Cl-7.1, 7.2 & 14.1, Table 1(Cu)	-	10000	-
Cl-7.2, 9.2.1 Table 2 (i)(C)	-	10000	-
Cl-7.2, 9.2.1Table 2 (ii)(Si)	-	10000	-
Cl-7.2, 9.2.1 Table 2 (iii)(Mn)	-	10000	-
Cl-7.2, 9.2.1 Table 2 (iv)(Al)	-	10000	-
Cl-7.2, 9.2.1 Table 2 (v)(Cr)	-	10000	-
Cl-7.2, 9.2.1 Table 2 (vi)(Mo)	-	10000	-
Cl-7.2, 9.2.1 Table 2 (vii)(Ni)	-	10000	-
Cl-7.2, 9.2.1 Table 2 (viii)(N)	-	10000	-
Cl-7.2, 9.2.1Table 2 (ix)(Ti)	-	10000	-
Cl-7.2, 9.2.1 Table 2 (x)(Nb)	-	10000	-
Cl-7.2, 9.2.1Table 2 (xi)(S)	-	10000	-
Cl-7.2, 9.2.1 Table 2 (xii)(P)	-	10000	-
Cl-7.2, 9.2.1 Table 2 (xiii)(Ta)	-	10000	-
Cl-7.2, 9.2.1 Table 2 (xiv)(Cu)	-	10000	-
Cl-7.2, 9.2.1 Table 2 (xv)(V)	-	10000	-
Cl-7.2, 9.2.1 Table 2 (xvi)(W)	-	10000	-
Cl-8.1(Austenitic and duplex stainless steels)	-	10000	-
Cl-8.2(Ferritic and martensitic stainless steels)	-	10000	-
Cl-8.3(Heat-treated)	-	10000	-
Cl-8.4 & 14.2(Recommended Heat Treatment for Stainless Steels)	-	10000	-
Cl-10.1(Tensile Test)	-	10000	-
Cl-10.2(Hardness Test)	-	10000	-
Cl-10.3(Bend test)	-	10000	-
Cl-10.4 & cl-10.3.2 Table-4(Hardness, Max-Brinell HBS/HBW)	-	10000	-
Cl-10.4 & cl-10.3.2 Table-4(Hardness, Max- Rockwell HRB)	-	10000	-
Cl-10.4 & cl-10.3.2 Table-4(Hardness, Max- Vickers Load (1 kg to 30 kg))	-	10000	-
Cl-10.4 & cl-10.3.2 Table-4(Yield Strength Min, Mpa 0.2 Percent Proof Stress)	-	10000	-
Cl-10.4 & cl-10.3.2 Table-4(Tensile Strength Min, MPa)	-	10000	-
Cl-10.4 & cl-10.3.2 Table-4(Elongation Percent Min)	-	10000	-
Cl-10.4 & cl-10.3.2 Table-4(Bend Test Dma)	-	10000	-
Cl-11(ERICHSEN CUPPING TEST)	-	10000	-
Cl-11.3, Table 5(Erichsen Values-Thickness)	-	10000	-
Cl-11.3, Table 5(Erichsen Values-Depth of Cup, Min)	-	10000	-
Cl-12(corrosion resistance)	-	10000	-
Cl-14.1(Retests for Chemical Analysis)	-	10000	-
Cl-14.2(Retest for Mechanical Properties)	-	10000	-
Cl-15(Surface Finish)	-	10000	-
Cl-17(Dimensions and Tolerances)	-	10000	-
Cl-19(Marking)	-	10000	-

10 Apr, 2028

-
Included w.e.f-20.08.2026

609

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 617 (2024)

Aluminium and Aluminium Alloys Ingots for Remelting and Castings for General Engineering Purposes â Specification (Fourth Revision)

14800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-6.1, Table-1(Si)	-	5000	For complete chemical testing - Cl 6.1, Table 1
Cl-6.1, Table-1(Fe)	-	0	-
Cl-6.1, Table-1(Cu)	-	0	-
Cl-6.1, Table-1(Mn)	-	0	-
Cl-6.1, Table-1(Mg)	-	0	-
Cl-6.1, Table-1(Cr)	-	0	-
Cl-6.1, Table-1(Ni)	-	0	-
Cl-6.1, Table-1(Zn)	-	0	-
Cl-6.1, Table-1(Pb)	-	0	-
Cl-6.1, Table-1(Sn)	-	0	-
Cl-6.1, Table-1(Ti)	-	0	-
Cl-6.1, Table-1(Others elements Each)	-	0	-
Cl-6.1, Table-1(Others elements Total)	-	0	-
Cl-6.1, Table-1(Aluminium)	-	0	-
Cl-6.2(The chemical analysis)	-	0	-
Cl-7.1, Table-2(Sand-Cast Alloys- Tensile Strength)	-	2500	-
Cl-7.1, Table-2(Sand-Cast Alloys- Proof Stress)	-	1500	-
Cl-7.1, Table-2(Sand-Cast Alloys- Elongation)	-	1500	-
Cl-7.1, Table-2(Sand-Cast Alloys- Brinell Hardness HBW)	-	1300	-
Cl-7.1, Table-3(Chill Cast Alloys- Tensile Strength)	-	0	-
Cl-7.1, Table-3(Chill Cast Alloys- Proof Stress)	-	0	-
Cl-7.1, Table-3(Chill Cast Alloys- Elongation)	-	0	-
Cl-7.1, Table-3(Chill Cast Alloys- Brinell Hardness HBW)	-	0	-
Cl-7.1, Table-4(Investment-Cast Alloys- Tensile Strength)	-	0	-
Cl-7.1, Table-4(Investment-Cast Alloys- Proof Stress)	-	0	-
Cl-7.1, Table-4(Investment-Cast Alloys- Elongation)	-	0	-
Cl-7.1, Table-4(Investment-Cast Alloys-Brinell Hardness)	-	0	-
Cl-7.2(Tensile Tests)	-	0	-
Cl-7.3(Test Pieces)	-	0	-
Cl-7.4(Hardness)	-	0	-
Cl-8(Freedom from Defects)	-	1000	for complete qualitative tests
Cl-11(RETEST)	-	0	-
Cl-13(Marking)	-	500	-
Cl. 6(Silicon)	-	0	-
Cl. 6(Iron)	-	0	-
Cl. 6(Copper)	-	0	-
Cl. 6(Manganese)	-	0	-
Cl. 6(Magnesium)	-	0	-
Cl. 6(Chromium)	-	0	-
Cl. 6(Nickel)	-	0	-
Cl. 6(Zinc)	-	0	-
Cl. 6(Lead)	-	0	-
Cl. 6(Tin)	-	0	-
Cl. 6(Titanium)	-	0	-
Cl. 6(Others Element Each)	-	0	-
Cl. 6(Others Element Total)	-	0	-
Cl. 6(Aluminium)	-	0	-
Cl. 6(Silver)	-	0	-
Cl. 6(Zirconium)	-	0	-
Cl. 6(Titanium+Zirconium)	-	0	-
Cl. 6(Antimony)	-	0	-
Cl. 6(Cobalt)	-	0	-
Cl. 6(Antimony+Cobalt)	-	0	-
Cl. 6(Beryllium)	-	0	-
10(Pressure Test)	-	1500	-
Cl-6.1, Table-1(Si)	-	0	-
Cl-6.1, Table-1(Fe)	-	0	-
Cl-6.1, Table-1(Cu)	-	0	-
Cl-6.1, Table-1(Mn)	-	0	-
Cl-6.1, Table-1(Mg)	-	0	-
Cl-6.1, Table-1(Cr)	-	0	-
Cl-6.1, Table-1(Ni)	-	0	-
Cl-6.1, Table-1(Zn)	-	0	-
Cl-6.1, Table-1(Pb)	-	0	-
Cl-6.1, Table-1(Sn)	-	0	-
Cl-6.1, Table-1(Ti)	-	0	-
Cl-6.1, Table-1(Others elements Each)	-	0	-
Cl-6.1, Table-1(Others elements Total)	-	0	-
Cl-6.1, Table-1(Aluminium)	-	0	-
Cl-6.2(The chemical analysis)	-	0	-
Cl-7.1, Table-2(Sand-Cast Alloys- Tensile Strength)	-	0	-
Cl-7.1, Table-2(Sand-Cast Alloys- Proof Stress)	-	0	-
Cl-7.1, Table-2(Sand-Cast Alloys- Elongation)	-	0	-
Cl-7.1, Table-2(Sand-Cast Alloys- Brinell Hardness HBW)	-	0	-
Cl-7.1, Table-3(Chill Cast Alloys- Tensile Strength)	-	0	-
Cl-7.1, Table-3(Chill Cast Alloys- Proof Stress)	-	0	-
Cl-7.1, Table-3(Chill Cast Alloys- Elongation)	-	0	-
Cl-7.1, Table-3(Chill Cast Alloys- Brinell Hardness HBW)	-	0	-
Cl-7.1, Table-4(Investment-Cast Alloys- Tensile Strength)	-	0	-
Cl-7.1, Table-4(Investment-Cast Alloys- Proof Stress)	-	0	-
Cl-7.1, Table-4(Investment-Cast Alloys- Elongation)	-	0	-
Cl-7.1, Table-4(Investment-Cast Alloys-Brinell Hardness)	-	0	-
Cl-7.2(Tensile Tests)	-	0	-
Cl-7.3(Test Pieces)	-	0	-
Cl-7.4(Hardness)	-	0	-
Cl-8(Freedom from Defects)	-	0	-
Cl-11(RETEST)	-	0	-
Cl-13(Marking)	-	0	-
Cl. 6(Silicon)	-	0	-
Cl. 6(Iron)	-	0	-
Cl. 6(Copper)	-	0	-
Cl. 6(Manganese)	-	0	-
Cl. 6(Magnesium)	-	0	-
Cl. 6(Chromium)	-	0	-
Cl. 6(Nickel)	-	0	-
Cl. 6(Zinc)	-	0	-
Cl. 6(Lead)	-	0	-
Cl. 6(Tin)	-	0	-
Cl. 6(Titanium)	-	0	-
Cl. 6(Others Element Each)	-	0	-
Cl. 6(Others Element Total)	-	0	-
Cl. 6(Aluminium)	-	0	-
Cl. 6(Silver)	-	0	-
Cl. 6(Zirconium)	-	0	-
Cl. 6(Titanium+Zirconium)	-	0	-
Cl. 6(Antimony)	-	0	-
Cl. 6(Cobalt)	-	0	-
Cl. 6(Antimony+Cobalt)	-	0	-
Cl. 6(Beryllium)	-	0	-
10(Pressure Test)	-	0	-
Cl-6.1, Table-1(Si)	-	-	-
Cl-6.1, Table-1(Fe)	-	-	-
Cl-6.1, Table-1(Cu)	-	-	-
Cl-6.1, Table-1(Mn)	-	-	-
Cl-6.1, Table-1(Mg)	-	-	-
Cl-6.1, Table-1(Cr)	-	-	-
Cl-6.1, Table-1(Ni)	-	-	-
Cl-6.1, Table-1(Zn)	-	-	-
Cl-6.1, Table-1(Pb)	-	-	-
Cl-6.1, Table-1(Sn)	-	-	-
Cl-6.1, Table-1(Ti)	-	-	-
Cl-6.1, Table-1(Others elements Each)	-	-	-
Cl-6.1, Table-1(Others elements Total)	-	-	-
Cl-6.1, Table-1(Aluminium)	-	-	-
Cl-6.2(The chemical analysis)	-	-	-
Cl-7.1, Table-2(Sand-Cast Alloys- Tensile Strength)	-	-	-
Cl-7.1, Table-2(Sand-Cast Alloys- Proof Stress)	-	-	-
Cl-7.1, Table-2(Sand-Cast Alloys- Elongation)	-	-	-
Cl-7.1, Table-2(Sand-Cast Alloys- Brinell Hardness HBW)	-	-	-
Cl-7.1, Table-3(Chill Cast Alloys- Tensile Strength)	-	-	-
Cl-7.1, Table-3(Chill Cast Alloys- Proof Stress)	-	-	-
Cl-7.1, Table-3(Chill Cast Alloys- Elongation)	-	-	-
Cl-7.1, Table-3(Chill Cast Alloys- Brinell Hardness HBW)	-	-	-
Cl-7.1, Table-4(Investment-Cast Alloys- Tensile Strength)	-	-	-
Cl-7.1, Table-4(Investment-Cast Alloys- Proof Stress)	-	-	-
Cl-7.1, Table-4(Investment-Cast Alloys- Elongation)	-	-	-
Cl-7.1, Table-4(Investment-Cast Alloys-Brinell Hardness)	-	-	-
Cl-7.2(Tensile Tests)	-	-	-
Cl-7.3(Test Pieces)	-	-	-
Cl-7.4(Hardness)	-	-	-
Cl-8(Freedom from Defects)	-	-	-
Cl-11(RETEST)	-	-	-
Cl-13(Marking)	-	-	-
Cl. 6(Silicon)	-	-	-
Cl. 6(Iron)	-	-	-
Cl. 6(Copper)	-	-	-
Cl. 6(Manganese)	-	-	-
Cl. 6(Magnesium)	-	-	-
Cl. 6(Chromium)	-	-	-
Cl. 6(Nickel)	-	-	-
Cl. 6(Zinc)	-	-	-
Cl. 6(Lead)	-	-	-
Cl. 6(Tin)	-	-	-
Cl. 6(Titanium)	-	-	-
Cl. 6(Others Element Each)	-	-	-
Cl. 6(Others Element Total)	-	-	-
Cl. 6(Aluminium)	-	-	-
Cl. 6(Silver)	-	-	-
Cl. 6(Zirconium)	-	-	-
Cl. 6(Titanium+Zirconium)	-	-	-
Cl. 6(Antimony)	-	-	-
Cl. 6(Cobalt)	-	-	-
Cl. 6(Antimony+Cobalt)	-	-	-
Cl. 6(Beryllium)	-	-	-
10(Pressure Test)	-	-	-

-
Included w.e.f-28.07.2026

610

Vimta Labs Limited (6132436), Hyderabad

6132436

IS 14203 (2023)

FIRE RESISTING RECORD PROTECTION CABINETS SPECIFICATION Second Revision of IS 14203

264999.99 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3 and 6 (Table 1)(Nominal Sizes - Height)	-	4999.99	-
3 and 6 (Table 1)(Nominal Sizes - Width)	-	5000	-
3 and 6 (Table 1)(Nominal Sizes - Depth)	-	5000	-
7(Designation)	-	5000	-
8.1(Cabinet Construction)	-	4999.98	-
8.2(Locking Mechanism)	-	5000	-
8.3(Locks)	-	5000	-
8.4(Handles)	-	5000	-
9(Internal Fixtures)	-	5000	-
10.1(Minimum overall thinckness of coating)	-	5000	-
11, Annex-B, 3.1(Fire Endurance Test)	-	170000	-
11, Annex-B, 3.2(Fire and Impact test)	-	100000	-
3 and 6 (Table 1)(Height of Pedestal)	-	5000	-
10.2(Cross Hatch Test)	-	15000	-
3 and 6 (Table 1)(Nominal Sizes - Height)	-	5000	-
3 and 6 (Table 1)(Nominal Sizes - Width)	-	5000	-
3 and 6 (Table 1)(Nominal Sizes - Depth)	-	5000	-
7(Designation)	-	5000	-
8.1(Cabinet Construction)	-	5000	-
8.2(Locking Mechanism)	-	5000	-
8.3(Locks)	-	5000	-
8.4(Handles)	-	5000	-
9(Internal Fixtures)	-	5000	-
10.1(Minimum overall thinckness of coating)	-	5000	-
11, Annex-B, 3.1(Fire Endurance Test)	-	170000	-
11, Annex-B, 3.2(Fire and Impact test)	-	100000	-
3 and 6 (Table 1)(Height of Pedestal)	-	5000	-
10.2(Cross Hatch Test)	-	15000	-

25 Oct, 2027

-
Included w.e.f. 11.08.2026

611

ARYAVRAT TEST HOUSE PRIVATE LIMITED

5191706

IS 1566 (1982)

Specification for hard - Drawn steel wire fabric for concrete reinforcement (Second Revision)

ALL

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Sulphur-Relevant Parts of IS 228)	-	1000	-
4.1(Phosphorous-Relevant Parts of IS 228)	-	1000	-
4.1(Nitrogen-Relevant Parts of IS 228)	-	1000	-
6(DIMENSIONS)	-	1000	-
7(SIZES OF SHEETS ‘OR ROLLS)	-	1000	-
8(MASS)	-	1000	-
9.2(Tolerance on Size of Mesh)	-	1000	-
9.3(Tolerance on Size of Sheet)	-	1000	-
9.4(Tolerance on Mass of Fabric)	-	1000	-
10(MECHANICAL PROPERTIES)	-	1000	-
11.2(Tensile Test)	-	1000	-
11.3(Reverse Bend Test)	-	1000	-
4.1(Sulphur-Relevant Parts of IS 228)	-	1000	-
4.1(Phosphorous-Relevant Parts of IS 228)	-	1000	-
4.1(Nitrogen-Relevant Parts of IS 228)	-	1000	-
6(DIMENSIONS)	-	1000	-
7(SIZES OF SHEETS ‘OR ROLLS)	-	1000	-
8(MASS)	-	1000	-
9.2(Tolerance on Size of Mesh)	-	1000	-
9.3(Tolerance on Size of Sheet)	-	1000	-
9.4(Tolerance on Mass of Fabric)	-	1000	-
10(MECHANICAL PROPERTIES)	-	2000	-
11.2(Tensile Test)	-	1000	-
11.3(Reverse Bend Test)	-	1000	-

28 Nov, 2028

-
Included w.e.f 02.07.2026

612

ARYAVRAT TEST HOUSE PRIVATE LIMITED

5191706

IS 2721 (2003)

Galvanized steel chain link fence fabric - Specification (Second Revision)

ALL

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.5(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl.5(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl.5(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl.5(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl.5(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl.5(Aluminium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl.5(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl.5(Niobium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl.5(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl.5(Titanium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl.6.1, 6.2, Table 1(Mesh Size)	-	1000	-
Cl.6.3, Table 1(Width of the fabric)	-	1000	-
Cl.6.3, Table 1(Length of the fabric)	-	1000	-
Cl.6.1, 6.2, Table 1(Nominal Dia of Mesh wire)	-	1000	-
Cl. 7.2 and Table 1(Line Wire (Diameter))	-	1000	-
Cl. 7.2 and Table 1(Line Wire (Number of wires))	-	1000	-
Cl.8(Chain link fence fabric(Mass of zinc coating)- IS 6745)	-	1000	-
Cl.8(Chain link fence fabric (Number of dips of zinc coating))	-	1000	-
Cl.8(Chain link fence fabric (Uniformity of Zinc coating)-IS 2633)	-	1000	-
Cl.8(Chain link fence fabric [Adhesion test of Zinc coating (Minimum complete turn of wrap)]- IS 4826/IS 12753)	-	1000	-
Cl.8(Chain link fence fabric [Adhesion test of Zinc coating( Ratio between mandrel diameter and of wire)]-IS 4826/IS 12753)	-	1000	-
Cl.9.1.1(Tensile test of mesh and line wires- IS 1608)	-	1000	-
Cl.9.1.2(Wrapping test of mesh and line wires-IS 1755)	-	1000	-
Cl.9.1.3(Twist test of mesh and line wires-IS 1717)	-	1000	-
Cl.9.1.4(Bend test of mesh and line wires- IS 1608)	-	1000	-
Cl.9.2(Line wire (Mass of zinc coating)- IS 6745)	-	1000	-
Cl.9.2(Line Wire (Number of dips of zinc coating))	-	1000	-
Cl.9.2(Line Wire (Uniformity of Zinc coating)-IS 2633)	-	1000	-
Cl.9.2(Line Wire [Adhesion test of Zinc coating (Minimum complete turn of wrap)]- IS 4826/IS 12753)	-	1000	-
Cl.9.2(Line Wire [Adhesion test of Zinc coating( Ratio between mandrel diameter and of wire)]-IS 4826/IS 12753)	-	1000	-
Cl.9.2(Mesh wire (Mass of zinc coating)- IS 6745)	-	1000	-
Cl.9.2(Mesh Wire (Number of dips of zinc coating))	-	1000	-
Cl.9.2(Mesh Wire (Uniformity of Zinc coating)-IS 2633)	-	1000	-
Cl.9.2(Mesh Wire [Adhesion test of Zinc coating (Minimum complete turn of wrap)]- IS 4826/IS 12753)	-	1000	-
Cl.9.2(Mesh Wire [Adhesion test of Zinc coating( Ratio between mandrel diameter and of wire)]-IS 4826/IS 12753)	-	1000	-
Cl.5(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl.5(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl.5(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl.5(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl.5(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl.5(Aluminium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl.5(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl.5(Niobium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl.5(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl.5(Titanium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl.6.1, 6.2, Table 1(Mesh Size)	-	1000	-
Cl.6.3, Table 1(Width of the fabric)	-	1000	-
Cl.6.3, Table 1(Length of the fabric)	-	1000	-
Cl.6.1, 6.2, Table 1(Nominal Dia of Mesh wire)	-	1000	-
Cl. 7.2 and Table 1(Line Wire (Diameter))	-	1000	-
Cl. 7.2 and Table 1(Line Wire (Number of wires))	-	1000	-
Cl.8(Chain link fence fabric(Mass of zinc coating)- IS 6745)	-	1000	-
Cl.8(Chain link fence fabric (Number of dips of zinc coating))	-	1000	-
Cl.8(Chain link fence fabric (Uniformity of Zinc coating)-IS 2633)	-	1000	-
Cl.8(Chain link fence fabric [Adhesion test of Zinc coating (Minimum complete turn of wrap)]- IS 4826/IS 12753)	-	1000	-
Cl.8(Chain link fence fabric [Adhesion test of Zinc coating( Ratio between mandrel diameter and of wire)]-IS 4826/IS 12753)	-	1000	-
Cl.9.1.1(Tensile test of mesh and line wires- IS 1608)	-	1000	-
Cl.9.1.2(Wrapping test of mesh and line wires-IS 1755)	-	1000	-
Cl.9.1.3(Twist test of mesh and line wires-IS 1717)	-	1000	-
Cl.9.1.4(Bend test of mesh and line wires- IS 1608)	-	1000	-
Cl.9.2(Line wire (Mass of zinc coating)- IS 6745)	-	1000	-
Cl.9.2(Line Wire (Number of dips of zinc coating))	-	1000	-
Cl.9.2(Line Wire (Uniformity of Zinc coating)-IS 2633)	-	1000	-
Cl.9.2(Line Wire [Adhesion test of Zinc coating (Minimum complete turn of wrap)]- IS 4826/IS 12753)	-	1000	-
Cl.9.2(Line Wire [Adhesion test of Zinc coating( Ratio between mandrel diameter and of wire)]-IS 4826/IS 12753)	-	1000	-
Cl.9.2(Mesh wire (Mass of zinc coating)- IS 6745)	-	1000	-
Cl.9.2(Mesh Wire (Number of dips of zinc coating))	-	1000	-
Cl.9.2(Mesh Wire (Uniformity of Zinc coating)-IS 2633)	-	1000	-
Cl.9.2(Mesh Wire [Adhesion test of Zinc coating (Minimum complete turn of wrap)]- IS 4826/IS 12753)	-	1000	-
Cl.9.2(Mesh Wire [Adhesion test of Zinc coating( Ratio between mandrel diameter and of wire)]-IS 4826/IS 12753)	-	1000	-

28 Nov, 2028

-
Included w.e.f 02.07.2026

613

ARYAVRAT TEST HOUSE PRIVATE LIMITED

5191706

IS 4948 (2020.0)

Welded steel wire fabric for general use - Specification (Second Revision)

ALL

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 4.1(MATERIALS)	-	2000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 4.2(MATERIALS)	-	2000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 5.1(MANUFACTURE OF MESH (Assembling of Wires))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 5.2(MANUFACTURE OF MESH)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 5.3(MANUFACTURE OF MESH)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 5.4(Spacing of Longitudinal and Transverse Wires)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 5.5(Tolerance of Size of Mesh)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 5.6(Tolerance of Size of Sheet or Roll)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 6(TEST FOR WELDING)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.1(Marking)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.1(Marking)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.1(Marking)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.1(Marking)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.1(Marking)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.1(Marking)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.1(Marking)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.3(BIS Certification Marking)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 10.1(Finish)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 4.1(MATERIALS)	-	2000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 4.2(MATERIALS)	-	2000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 5.1(MANUFACTURE OF MESH (Assembling of Wires))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 5.2(MANUFACTURE OF MESH)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 5.3(MANUFACTURE OF MESH)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 5.4(Spacing of Longitudinal and Transverse Wires)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 5.5(Tolerance of Size of Mesh)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 5.6(Tolerance of Size of Sheet or Roll)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 6(TEST FOR WELDING)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 4.1(MATERIALS)	-	2000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 4.2(MATERIALS)	-	2000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 5.1(MANUFACTURE OF MESH (Assembling of Wires))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 5.2(MANUFACTURE OF MESH)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 5.3(MANUFACTURE OF MESH)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 5.4(Spacing of Longitudinal and Transverse Wires)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 5.5(Tolerance of Size of Mesh)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 5.6(Tolerance of Size of Sheet or Roll)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 6(TEST FOR WELDING)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.1(Marking)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.1(Marking)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.1(Marking)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.1(Marking)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.1(Marking)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.1(Marking)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.1(Marking)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.3(BIS Certification Marking)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 10.1(Finish)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

28 Nov, 2028

-
Included w.e.f 02.07.2026

614

National Test House (WR) - NTH, Mumbai

7107604

IS 12894 (2002)

Pulverized fuel ash - Lime bricks - Specification

All

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(General Requirements)	-	100	-
3.2(General Requirements)	-	500	-
3.3(General Requirements)	-	100	-
3.4(General Requirements)	-	200	-
3.5(General Requirements)	-	100	-
5.1(Dimensions)	-	1000	-
7.1, Table -1(Average Wet Compressive Strength)	-	2000	-
7.2(Drying Shrinkage)	-	1999.99	-
7.3(Efflorescence Test)	-	1000	-
7.4(Water Absorption)	-	1000	-
5.2(Tolerance)	-	1000	-
9(Marking)	-	100	-
6(Materials)	-	0	-
3.1(General Requirements)	-	100	-
3.2(General Requirements)	-	500	-
3.3(General Requirements)	-	100	-
3.4(General Requirements)	-	200	-
3.5(General Requirements)	-	100	-
5.1(Dimensions)	-	1000	-
7.1, Table -1(Average Wet Compressive Strength)	-	2000	-
7.2(Drying Shrinkage)	-	2000	-
7.3(Efflorescence Test)	-	1000	-
7.4(Water Absorption)	-	1000	-
5.2(Tolerance)	-	1000	-
9(Marking)	-	100	-
6(Materials)	-	0	-

-
Included w.e.f-17.08.2026 6 (Materials)

615

ARYAVRAT TEST HOUSE PRIVATE LIMITED

5191706

IS 2062 (Part 1) (2025)

Structural Steel - Part 1 - Hot Rolled Medium and High tensile Steel

ALL

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-6(MANUFACTURE)	-	1000	-
Cl-7(FREEDOM FROM DEFECTS)	-	1000	-
Cl-8.1(Ladle Analysis)	-	1000	-
Cl-8.1 & 8.2, Table-1(Ladle Analysis-C)	-	1000	-
Cl-8.1 & 8.2, Table-1(Ladle Analysis- Mn)	-	1000	-
Cl-8.1 & 8.2, Table-1(Ladle Analysis- S)	-	1000	-
Cl-8.1 & 8.2, Table-1(Ladle Analysis- P)	-	1000	-
Cl-8.1 & 8.2, Table-1(Ladle Analysis- Si )	-	1000	-
Cl-8.1 & 8.2, Table-1(Carbon Equivalen t (CE), Max)	-	1000	-
Cl-8.1 & 8.2, Note-1(Total aluminium)	-	1000	-
Cl-8.1 & 8.2, Note-5(Nb)	-	1000	-
Cl-8.1 & 8.2, Note-5(V)	-	1000	-
Cl-8.1 & 8.2, Note-5(Ti)	-	1000	-
Cl-8.1 & 8.2, Note-6(B)	-	1000	-
Cl-8.2, Table 2 (i)(Carbon)	-	1000	-
Cl-8.2, Table 2 (ii)(Manganese)	-	1000	-
Cl-8.2, Table 2 (iii)(Sulphur)	-	1000	-
Cl-8.2, Table 2 (iv)(Phosphorus)	-	1000	-
Cl-8.2, Table 2 (v)(Silicon)	-	1000	-
Cl-8.2, Table 2 (vi)(Copper)	-	1000	-
Cl-8.2, Table 2 (vii)(Vanadium)	-	1000	-
Cl-8.2, Table 2 (viii)(Niobium)	-	1000	-
Cl-8.2, Table 2 (ix)(Titanium)	-	1000	-
Cl-8.2, Table 2 (x)(Nitrogen)	-	1000	-
Cl-10.1(Number of Tensile Tests)	-	1000	-
Cl-10.2(Tensile Test Pieces)	-	1000	-
Cl-10.3, 10.3.1, 11.3.1, 12.2, 12.4 & 12.5, Table-3(Tensile Strength Rm, Min MPa7)	-	1000	-
Cl-10.3, 10.3.1, 11.3.1, 12.2, 12.4 & 12.5, Table-3(Yield Stress ReH, Min MPa7)	-	1000	-
Cl-10.3, 10.3.1, 11.3.1, 12.2, 12.4 & 12.5, Table-3(Percentage Elongation A, Min at Gauge Length, L0=5.65√So)	-	1000	-
Cl-10.3, 10.3.1, 11.3.1, 12.2, 12.4 & 12.5, Table-3(Internal Bend Diameter Max)	-	1000	-
Cl-10.3, 10.3.1, 11.3.1, 12.2, 12.4 & 12.5, Table-3(Charpy Impact Test-Temp°C)	-	1000	-
Cl-10.3, 10.3.1, 11.3.1, 12.2, 12.4 & 12.5, Table-3(Charpy Impact Test- Min J)	-	1000	-
Cl-11.1(Number of Bend Tests)	-	1000	-
Cl-11.2(Bend Test Piece)	-	1000	-
Cl-11.3(Bend Test )	-	1000	-
Cl-12(Impact Test )	-	1000	-
Cl-14, Table-4 (i)(Beam, column, channel and angle sections including parallel beam and column sections)	-	1000	-
Cl-14, Table-4 (ii)(Tee bars)	-	1000	-
Cl-14, Table-4 (iii)(Bulb angles)	-	1000	-
Cl-14, Table-4 (iv)(Plates, sheets, strips and flats)	-	1000	-
Cl-14, Table-4 (vi)(Round and square bars)	-	1000	-
Cl-14, Table-4 (vii)(Bulb flats)	-	1000	-
Cl-14, Table-4 (viii)(Sheet piling sections)	-	1000	-
Cl-14, Table-4 (ix)(Channel sections)	-	1000	-
Cl-13(Other TestsNondestructive testing, Metallurgical tests )	-	1000	-
Cl-13.3(Strength of joint )	-	1000	-
Cl-15(Tolerances)	-	1000	-
Cl-16.1(Retests)	-	1000	-
Cl-16.2(Re-heat Treatment)	-	1000	-
Cl-6(MANUFACTURE)	-	500	-
Cl-7(FREEDOM FROM DEFECTS)	-	500	-
Cl-8.1(Ladle Analysis)	-	1000	-
Cl-8.1 & 8.2, Table-1(Ladle Analysis-C)	-	1000	-
Cl-8.1 & 8.2, Table-1(Ladle Analysis- Mn)	-	1000	-
Cl-8.1 & 8.2, Table-1(Ladle Analysis- S)	-	1000	-
Cl-8.1 & 8.2, Table-1(Ladle Analysis- P)	-	1000	-
Cl-8.1 & 8.2, Table-1(Ladle Analysis- Si )	-	1000	-
Cl-8.1 & 8.2, Table-1(Carbon Equivalen t (CE), Max)	-	1000	-
Cl-8.1 & 8.2, Note-1(Total aluminium)	-	1000	-
Cl-8.1 & 8.2, Note-5(Nb)	-	1000	-
Cl-8.1 & 8.2, Note-5(V)	-	1000	-
Cl-8.1 & 8.2, Note-5(Ti)	-	1000	-
Cl-8.1 & 8.2, Note-6(B)	-	1000	-
Cl-8.2, Table 2 (i)(Carbon)	-	1000	-
Cl-8.2, Table 2 (ii)(Manganese)	-	1000	-
Cl-8.2, Table 2 (iii)(Sulphur)	-	1000	-
Cl-8.2, Table 2 (iv)(Phosphorus)	-	1000	-
Cl-8.2, Table 2 (v)(Silicon)	-	1000	-
Cl-8.2, Table 2 (vi)(Copper)	-	1000	-
Cl-8.2, Table 2 (vii)(Vanadium)	-	1000	-
Cl-8.2, Table 2 (viii)(Niobium)	-	1000	-
Cl-8.2, Table 2 (ix)(Titanium)	-	1000	-
Cl-8.2, Table 2 (x)(Nitrogen)	-	1000	-
Cl-10.1(Number of Tensile Tests)	-	0	-
Cl-10.2(Tensile Test Pieces)	-	1000	-
Cl-10.3, 10.3.1, 11.3.1, 12.2, 12.4 & 12.5, Table-3(Tensile Strength Rm, Min MPa7)	-	1000	-
Cl-10.3, 10.3.1, 11.3.1, 12.2, 12.4 & 12.5, Table-3(Yield Stress ReH, Min MPa7)	-	1000	-
Cl-10.3, 10.3.1, 11.3.1, 12.2, 12.4 & 12.5, Table-3(Percentage Elongation A, Min at Gauge Length, L0=5.65√So)	-	1000	-
Cl-10.3, 10.3.1, 11.3.1, 12.2, 12.4 & 12.5, Table-3(Internal Bend Diameter Max)	-	1000	-
Cl-10.3, 10.3.1, 11.3.1, 12.2, 12.4 & 12.5, Table-3(Charpy Impact Test-Temp°C)	-	1000	-
Cl-10.3, 10.3.1, 11.3.1, 12.2, 12.4 & 12.5, Table-3(Charpy Impact Test- Min J)	-	5000	-
Cl-11.1(Number of Bend Tests)	-	0	-
Cl-11.2(Bend Test Piece)	-	1000	-
Cl-11.3(Bend Test )	-	1000	-
Cl-12(Impact Test )	-	5000	-
Cl-14, Table-4 (i)(Beam, column, channel and angle sections including parallel beam and column sections)	-	1000	-
Cl-14, Table-4 (ii)(Tee bars)	-	1000	-
Cl-14, Table-4 (iii)(Bulb angles)	-	1000	-
Cl-14, Table-4 (iv)(Plates, sheets, strips and flats)	-	1000	-
Cl-14, Table-4 (vi)(Round and square bars)	-	1000	-
Cl-14, Table-4 (vii)(Bulb flats)	-	1000	-
Cl-14, Table-4 (viii)(Sheet piling sections)	-	1000	-
Cl-14, Table-4 (ix)(Channel sections)	-	1000	-
Cl-13(Other TestsNondestructive testing, Metallurgical tests )	-	5000	-
Cl-13.3(Strength of joint )	-	2000	-
Cl-15(Tolerances)	-	1000	-
Cl-16.1(Retests)	-	14000	-
Cl-16.2(Re-heat Treatment)	-	1000	-
Cl-6(MANUFACTURE)	-	500	-
Cl-7(FREEDOM FROM DEFECTS)	-	500	-
Cl-8.1(Ladle Analysis)	-	1000	-
Cl-8.1 & 8.2, Table-1(Ladle Analysis-C)	-	1000	-
Cl-8.1 & 8.2, Table-1(Ladle Analysis- Mn)	-	1000	-
Cl-8.1 & 8.2, Table-1(Ladle Analysis- S)	-	1000	-
Cl-8.1 & 8.2, Table-1(Ladle Analysis- P)	-	1000	-
Cl-8.1 & 8.2, Table-1(Ladle Analysis- Si )	-	1000	-
Cl-8.1 & 8.2, Table-1(Carbon Equivalen t (CE), Max)	-	1000	-
Cl-8.1 & 8.2, Note-1(Total aluminium)	-	1000	-
Cl-8.1 & 8.2, Note-5(Nb)	-	1000	-
Cl-8.1 & 8.2, Note-5(V)	-	1000	-
Cl-8.1 & 8.2, Note-5(Ti)	-	1000	-
Cl-8.1 & 8.2, Note-6(B)	-	1000	-
Cl-8.2, Table 2 (i)(Carbon)	-	1000	-
Cl-8.2, Table 2 (ii)(Manganese)	-	1000	-
Cl-8.2, Table 2 (iii)(Sulphur)	-	1000	-
Cl-8.2, Table 2 (iv)(Phosphorus)	-	1000	-
Cl-8.2, Table 2 (v)(Silicon)	-	1000	-
Cl-8.2, Table 2 (vi)(Copper)	-	1000	-
Cl-8.2, Table 2 (vii)(Vanadium)	-	1000	-
Cl-8.2, Table 2 (viii)(Niobium)	-	1000	-
Cl-8.2, Table 2 (ix)(Titanium)	-	1000	-
Cl-8.2, Table 2 (x)(Nitrogen)	-	1000	-
Cl-10.1(Number of Tensile Tests)	-	1000	-
Cl-10.2(Tensile Test Pieces)	-	1000	-
Cl-10.3, 10.3.1, 11.3.1, 12.2, 12.4 & 12.5, Table-3(Tensile Strength Rm, Min MPa7)	-	1000	-
Cl-10.3, 10.3.1, 11.3.1, 12.2, 12.4 & 12.5, Table-3(Yield Stress ReH, Min MPa7)	-	1000	-
Cl-10.3, 10.3.1, 11.3.1, 12.2, 12.4 & 12.5, Table-3(Percentage Elongation A, Min at Gauge Length, L0=5.65√So)	-	1000	-
Cl-10.3, 10.3.1, 11.3.1, 12.2, 12.4 & 12.5, Table-3(Internal Bend Diameter Max)	-	1000	-
Cl-10.3, 10.3.1, 11.3.1, 12.2, 12.4 & 12.5, Table-3(Charpy Impact Test-Temp°C)	-	1000	-
Cl-10.3, 10.3.1, 11.3.1, 12.2, 12.4 & 12.5, Table-3(Charpy Impact Test- Min J)	-	1000	-
Cl-11.1(Number of Bend Tests)	-	500	-
Cl-11.2(Bend Test Piece)	-	1000	-
Cl-11.3(Bend Test )	-	1000	-
Cl-12(Impact Test )	-	5000	-
Cl-14, Table-4 (i)(Beam, column, channel and angle sections including parallel beam and column sections)	-	1000	-
Cl-14, Table-4 (ii)(Tee bars)	-	1000	-
Cl-14, Table-4 (iii)(Bulb angles)	-	1000	-
Cl-14, Table-4 (iv)(Plates, sheets, strips and flats)	-	1000	-
Cl-14, Table-4 (vi)(Round and square bars)	-	1000	-
Cl-14, Table-4 (vii)(Bulb flats)	-	1000	-
Cl-14, Table-4 (viii)(Sheet piling sections)	-	1000	-
Cl-14, Table-4 (ix)(Channel sections)	-	1000	-
Cl-13(Other TestsNondestructive testing, Metallurgical tests )	-	5000	-
Cl-13.3(Strength of joint )	-	1000	-
Cl-15(Tolerances)	-	1000	-
Cl-16.1(Retests)	-	1000	-
Cl-16.2(Re-heat Treatment)	-	1000	-

28 Nov, 2028

-
Included w.e.f 02.07.2026

616

DELHI TEST HOUSE (A Unit of Delhii Test House Global LLP) (65) KUNDLI-2 SONIPAT

9138006

IS 9968 : Part 1 (2025)

Elastomer Insulated Cables - Specification Part 1 for Working Voltages up to and including 1100 volts (Second Revision)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Copper Conductor)	-	300	-
Cl-4.2(Aluminum Conductor)	-	300	-
Cl-6.1(Proofed Tape)	-	300	-
Cl-6.2("Polyethylene Terephthalate (PETP) Tape or Plastic Tape or Any Other Suitable Tape")	-	300	-
Cl-6.3(Glass Tape)	-	300	-
Cl-7(Fillers)	-	300	-
Cl-8.1(Textile Braid)	-	300	-
Cl-8.2(Glass Braid)	-	300	-
Cl-9.1(General Service Insulated Cables and Flexible Cords)	-	300	-
Cl-9.2(Heat Resisting Insulated Cables)	-	300	-
Cl-9.3(Silicon Rubber Insulated Cable)	-	300	-
Cl-10.1(Preservative Compound)	-	300	-
Cl-10.2(Varnish)	-	300	-
Cl-12(separator tape)	-	300	-
Cl-14(Core Identification)	-	300	-
Cl-18(Laying UP of Cores)	-	300	-
Cl-19(Binder Tape)	-	300	-
Cl-20.2(Thickness of Sheath)	-	750	-
Cl-20.3(Tolerance on Thickness of Sheath)	-	750	-
Cl-20.4(Colour)	-	500	-
Cl-22.1 (i) (a)(Conductor resistance test)	-	3000	-
Cl-22.1 (i) (b)(High voltage test or spark test.)	-	3000	-
Cl-22.1 (ii) (a)(Annealing test (for copper);)	-	2500	-
Cl-22.1 (ii) (b)(Tensile Test ((for aluminium);)	-	2500	-
Cl-22.1 (ii) (c)(Wrapping test (for aluminium);)	-	1000	-
Cl-22.1 (ii) (f)(Tensile strength and elongation at break of insulation and sheath)	-	3000	-
Cl-22.1 (ii) (g)(Hot set test for insulation and sheath)	-	3000	-
Cl-22.1 (ii) (h)(High voltage test)	-	3000	-
Cl-22.1 (ii) (i)(Insulation resistance test)	-	3000	-
Cl-22.1 (iii) (a)(Persulphate test (for tinned copper);)	-	3500	-
Cl-22.1 (iii) (f)(Test for thickness of insulation and sheath and overall diameter)	-	1500	-
Electrical(Tensile strength and elongation at break)	-	3000	-
Cl-22.1 (iii) (g), 2(Ageing in air oven)	-	3000	-
Cl-22.1 (iii) (g), 3(Ageing in air bomb)	-	3000	-
Cl-22.1 (iii) (g), 4(Ageing In oxygen bomb)	-	3500	-
Cl-22.1 (iii) (g), 5(Hot set)	-	3000	-
Cl-22.1 (iii) (g), 6(Oil resistance;)	-	3500	-
Cl-22.1 (iii) (g), 7(Tear resistance)	-	3000	-
Cl-22.1 (iii) (i)(High voltage (water immersion) test;)	-	3000	-
Cl-22.1 (iii) (j)(Flammability test)	-	1500	-
Cl-22.1 (iii) (k)(Water absorption test (for insulation as applicable))	-	2500	-
Cl-24.1(Manufacturer’s Identification)	-	200	-
Cl-25(Packing and Morning)	-	0	-
CL. 22.1 (iv) a,(Flexing test for Cords for use with electric iron)	-	1500	-

31 Dec, 2029

-
Included w.e.f 18.08.2026

617

Samridhi Test House Pvt. Ltd.

8184706

IS 302 : Part 2 : Sec 3 (2024)

Household and Similar Electrical Appliances âSafety Part 2 Particular Requirements Section 3 Electric Irons (Second Revision)

All Grade / Type / Size / Designation

7900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General requirement)	-	200	-
Cl-7(Marking and instructions)	-	200	-
Cl-8(Protection against access to live parts)	-	400	-
Cl-10(Power input and current)	-	400	-
Cl-11(Heating)	-	700	-
Cl-12(Charging of metal-ion batteries)	-	200	-
Cl-13(Leakage current and electric strength at operating temperature)	-	200	-
Cl-14(Transient overvoltages)	-	200	-
Cl-15(Moisture resistance)	-	200	-
Cl-16(Leakage current and electric strength)	-	200	-
Cl-17(Overload protection of transformers and associated circuits)	-	200	-
Cl-18(Endurance)	-	200	-
Cl-19(Abnormal operation)	-	500	-
Cl-20(Stability and mechanical hazards)	-	200	-
Cl-21(Mechanical strength)	-	200	-
Cl-22(Construction)	-	200	-
Cl-23(Internal wiring)	-	400	-
Cl-24(Components)	-	400	-
Cl-25(Supply connection and external flexible cords)	-	400	-
Cl-26(Terminals for external conductors)	-	200	-
Cl-27(Provision for earthing)	-	500	-
Cl-28(Screws and connections)	-	300	-
Cl-29(Clearances, creepage distances and solid insulation)	-	200	-
Cl-30(Resistance to heat and fire)	-	500	-
Cl-31(Resistance to rusting)	-	300	-
Cl-32(Radiation, toxicity and similar hazards)	-	300	-
Cl-19.11.4.1(Electrostatic discharges)	-	0	-
Cl-19.11.4.2(Radiated fields)	-	0	-
Cl-19.11.4.3(Fast transient bursts)	-	0	-
Cl-19.11.4.4(Surge immunity test)	-	0	-
Cl-19.11.4.5(Immunity to conducted discharges)	-	0	-
Cl-19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
Cl-19.11.4.7(Harmonics)	-	0	-

-
Included w.e.f. 22.07.2026 Exclusion: "Cl-19.11.4.1 (Electrostatic discharges) Cl-19.11.4.2 (Radiated fields) Cl-19.11.4.3 (Fast transient bursts) Cl-19.11.4.4 (Surge immunity test) Cl-19.11.4.5 (Immunity to conducted discharges) Cl-19.11.4.6 (Class 3 Voltage dips and interruptions) Cl-19.11.4.7 (Harmonics) "

618

Samridhi Test House Pvt. Ltd.

8184706

IS 15909 (2020)

PVC Geomembranes for Lining - Specification ( Second Revision )

All Grade / Type / Size / Designation

99000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.0(Types)	-	1000	-
5,Table 1(Requirements)	-	500	-
5,Table 1(Length )	-	1000	-
5,Table 1(Width )	-	1000	-
5,Table 1(Thickness)	-	1000	-
5,Table 1(Specific Gravity)	-	1000	-
5,Table 1( Tensile strength (Longitudinal) ,kg/m2)	-	2500	-
5,Table 1(Elongation at break (Longitudinal),250 % ,Min)	-	2500	-
5,Table 1( Tensile strength (Transverse) ,kg/m2)	-	2500	-
5,Table 1(Elongation at break (Transverse),250 % ,Min)	-	2500	-
5,Table 1(Tear resistance (machine direction))	-	2500	-
5,Table 1(Tear resistance (Cross direction))	-	2500	-
5,Table 1(Index puncture resistance,N)	-	5000	-
5,Table 1(Low temperature crack resistance)	-	3000	-
5,Table 1(Hydrostatic resistance,kg/cm2,Min)	-	5000	-
5,Table 1(Seam strength,kg,Min)	-	2500	-
5,Table 1(Volatile Loss ,% ,Max)	-	1500	-
5,Table 1(Peel strength,kN/m,Min)	-	2500	-
5,Table 1(Resistance to soil burial)	-	2500	-
5,Table 1(Tensile strength (Longitudinal),% change)	-	2500	-
5,Table 1(Elongation at break (Longitudinal),% change)	-	2500	-
5,Table 1(Tensile strength (Transverse),% change)	-	2500	-
5,Table 1(Elongation at break (Transverse),% change)	-	2500	-
5,Table 1(Water extraction,% loss in weight)	-	2000	-
5,Table 1(Stability to ultraviolet radiations,% retension in Tensile strength)	-	5000	-
5,Table 1(Stability to ultraviolet radiations,% retension in Elongation at break)	-	5000	-
6.0(Dimensions and tolerances)	-	1000	-
5, Table-2(Length)	-	500	-
5, Table-2(Width)	-	500	-
5, Table-2(Thickness at 20kPa pressure)	-	500	-
5, Table-2(Tensile Strength (Longitudinal))	-	1500	-
5, Table-2(Tensile Strength (Transverse))	-	1500	-
5, Table-2(Elongation at break (Longitudinal))	-	1500	-
5, Table-2(Elongation at break (Transverse))	-	1500	-
5, Table-2(Tear Strength (Machine direction))	-	1500	-
5, Table-2(Tear Strength (Cross direction))	-	1500	-
5, Table-2(Behaviour during perforation)	-	5000	-
5, Table-2(Height of fall without perforation)	-	1200	-
5, Table-2(Cold crack resistance at low temperature)	-	2000	-
5, Table-2(Hydrostatic Pressure Resistance)	-	2500	-
5, Table-2(Dimensional Stability at 80 degree C)	-	1500	-
5, Table-2(Change in length after heating)	-	1500	-
5, Table-2(Change in width after heating)	-	1500	-
5, Table-2(Resistance to acid and alkali)	-	1000	-
5, Table-2(Strength of welded seam shear resistance)	-	1500	-
5, Table-2(Resistance to static puncturing)	-	1000	-
5, Table-2(Horizontal rate of burning)	-	1000	-
5, Table-2(Vertical rate of burning)	-	1000	-
7.0(Colour ,Surface characteristics and fredom from defects)	-	500	-
7.1(Colour ,Surface characteristics and fredom from defects)	-	500	-
7.2(Colour ,Surface characteristics and fredom from defects)	-	500	-
5,Table 2(Specific Gravity)	-	800	-
5,Table 1(Specific Gravity)	-	0	-
5,Table 2(Specific Gravity)	-	0	-
5,Table 1(Specific Gravity)	-	0	-
5,Table 2(Specific Gravity)	-	0	-

-
Included w.e.f. 09.06.2026

619

Basil Quality Testing lab Private Limited

8195736

IS 9873 (Part 2) (2025)

SAFETY OF TOYS PART 2 FLAMMABILITY (Fourth Revision)

2500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(General)	-	300	-
4.2,4.2.2(a) -5.2(Toys to be worn on the head (Beards,moustaches,wigs,etc.made from pile or flowing elements which protrude 50 mm or more from the surface of the toy))	-	300	-
4.2,4.2.2(b) -5.2(Toys to be worn on the head (Beards,moustaches,wigs,etc.made from pile or flowing elements which protrude 50 mm or more from the surface of the toy))	-	300	-
4.2,4.2.3 -5.3(Toys to be worn on the head (Beards,moustaches,wigs,etc.made from pile or flowing elements which protrude less than 50 mm from the surface of the toy))	-	300	-
4.2,4.2.4 -5.3(Toys to be worn on the head (Full or partial moulded head masks))	-	300	-
4.2,4.2.5 -5.4(Toys to be worn on the head (hood & headdresses,including upward -protruding items & mask not covered by 4.2.4 which partially or fully cover the head (e.g fabric & paperboard masks,eye masks,face masks), but excluding those items covered by 4.3))	-	300	-
4.2,4.2.5 -5.4(Toys to be worn on the head (hood & headdresses,including upward -protruding items & mask not covered by 4.2.4 which partially or fully cover the head (e.g fabric & paperboard masks,eye masks,face masks), but excluding those items covered by 4.3))	-	300	-
4.3 -5.5(Toy disguise costumes & toys intended to be worn by a child in play)	-	300	-
4.3 -5.5(Toy disguise costumes & toys intended to be worn by a child in play)	-	300	-
4.3 -5.4(Toy disguise costumes & toys intended to be worn by a child in play)	-	300	-
4.3 -5.4(Toy disguise costumes & toys intended to be worn by a child in play)	-	300	-
4.4 -5.4(Toys intended to be entered by a child)	-	300	-
4.4 -5.4(Toys intended to be entered by a child)	-	300	-
4.4 -5.4(Toys intended to be entered by a child Warning)	-	300	-
4.5 -5.5(Soft-filled toys)	-	300	-
4.5 -5.5(Soft-filled toys)	-	300	-

08 Jan, 2029

-
Included w.e.f 22.07.2026

620

Gravitas Laboratories Private Limited, Greater Noida

8182606

IS 2062 (Part 2) (2026)

Structural Steel - Part 2 - Hot Rolled Quenched and Tempered Steel Plates, Sheets, Strips and Wide Flats

ALL

30500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General requirements)	-	0	-
Cl-6(Manufacture )	-	0	-
Cl-7.1(Ladle Analysis (Heat Analysis))	-	9000	-
Cl-7.1 & 7.3, Table 1 (C (S Grades ))	-	0	-
Cl-7.1 & 7.3, Table 1 (Mn (S Grades ))	-	0	-
Cl-7.1 & 7.3, Table 1 (S (S Grades) )	-	0	-
Cl-7.1 & 7.3, Table 1 (P (S Grades) )	-	0	-
Cl-7.1 & 7.3, Table 1 (Si (S Grades) )	-	0	-
Cl-7.1 & 7.3, Table 1 (Cr (S Grades) )	-	0	-
Cl-7.1 & 7.3, Table 1 (Ni (S Grades) )	-	0	-
Cl-7.1 & 7.3, Table 1 (Mo (S Grades) )	-	0	-
Cl-7.1 & 7.3, Table 1 (N (S Grades) )	-	0	-
Cl-7.1 & 7.3, Table 1 (B (S Grades) )	-	0	-
Cl-7.1 & 7.3, Table 1 (Cu (S Grades) )	-	0	-
Cl-7.1 & 7.3, Table 1 (Nb (S Grades) )	-	0	-
Cl-7.1 & 7.3, Table 1 (Ti (S Grades) )	-	0	-
Cl-7.1 & 7.3, Table 1 (V (S Grades) )	-	0	-
Cl-7.1 & 7.3, Table 1 (Zr (S Grades) )	-	0	-
Cl-7.1 & 7.3, Table 1 (Aluminium (S Grades) )	-	0	-
Cl-7.1 & 7.3, Table 2(C (SG Grades))	-	0	-
Cl-7.1 & 7.3, Table 2(Mn (SG Grades))	-	0	-
Cl-7.1 & 7.3, Table 2(S (SG Grades))	-	0	-
Cl-7.1 & 7.3, Table 2(P (SG Grades))	-	0	-
Cl-7.1 & 7.3, Table 2(Si (SG Grades))	-	0	-
Cl-7.1 & 7.3, Table 2(Cu (SG Grades))	-	0	-
Cl-7.1 & 7.3, Table 2(Ni (SG Grades))	-	0	-
Cl-7.1 & 7.3, Table 2(Cr (SG Grades))	-	0	-
Cl-7.1 & 7.3, Table 2(Mo (SG Grades))	-	0	-
Cl-7.1 & 7.3, Table 2(V (SG Grades))	-	0	-
Cl-7.1 & 7.3, Table 2(Nb (SG Grades))	-	0	-
Cl-7.1 & 7.3, Table 2(Ti (SG Grades))	-	0	-
Cl-7.1 & 7.3, Table 2(B (SG Grades))	-	0	-
Cl-7.1 & 7.3, Table 2(Zr (SG Grades))	-	0	-
Cl-7.2, Table 3 (i)(Carbon)	-	0	-
Cl-7.2, Table 3 (ii)(Silicon)	-	0	-
Cl-7.2, Table 3 (iii)(Manganese)	-	0	-
Cl-7.2, Table 3 (iv)(Phosphorus)	-	0	-
Cl-7.2, Table 3 (v)(Sulphur)	-	0	-
Cl-7.2, Table 3 (vi)(Vanadium)	-	0	-
Cl-7.2, Table 3 (vii)(Niobium)	-	0	-
Cl-7.2, Table 3 (viii)(Boron)	-	0	-
Cl-7.2, Table 3 (ix)(Titanium)	-	0	-
Cl-7.2, Table 3 (x)(Copper)	-	0	-
Cl-7.2, Table 3 (xi)(Nickel)	-	0	-
Cl-7.2, Table 3 (xii)(Chromium)	-	0	-
Cl-7.2, Table 3 (xiii)(Molybdenum)	-	0	-
Cl-7.2, Table 3 (xiv)(Zirconium)	-	0	-
Cl-7.2, Table 3 (xv)(Nitrogen)	-	0	-
Cl-7.2, Table-4 (i)(Carbon)	-	0	-
Cl-7.2, Table-4 (ii)(Silicon)	-	0	-
Cl-7.2, Table-4 (iii)(Manganese)	-	0	-
Cl-7.2, Table-4 (iv)(Phosphorus)	-	0	-
Cl-7.2, Table-4 (v)(Sulphur)	-	0	-
Cl-7.2, Table-4 (vi)(Vanadium)	-	0	-
Cl-7.2, Table-4 (vii)(Niobium)	-	0	-
Cl-7.2, Table-4 (viii)(Boron)	-	0	-
Cl-7.2, Table-4 (ix)(Titanium)	-	0	-
Cl-7.2, Table-4 (x)(Copper)	-	0	-
Cl-7.2, Table-4 (xi)(Nickel)	-	0	-
Cl-7.2, Table-4 (xii)(Chromium)	-	0	-
Cl-7.2, Table-4 (xiii)(Molybdenum)	-	0	-
Cl-7.2, Table-4 (xiv)(Zirconium)	-	0	-
Cl-7.2, Table-4 (xv)(Nitrogen)	-	0	-
Cl-7.3 & 7.4(Carbon Equivalent Value (CE))	-	400	-
Cl-8.1 & 8.4, Table 7(Minimum Yield Strength ReH, MPa Nominal Thickness,-≥3 ≤ 50)	-	0	-
Cl-8.1 & 8.4, Table 7(Minimum Yield Strength ReH, MPa Nominal Thickness,-> 50 ≤ 100)	-	0	-
Cl-8.1 & 8.4, Table 7(Minimum Yield Strength ReH, MPa Nominal Thickness,-> 100 ≤ 125)	-	0	-
Cl-8.1 & 8.4, Table 7(Minimum Yield Strength ReH, MPa Nominal Thickness,-> 125 ≤ 200)	-	0	-
Cl-8.1 & 8.4, Table 7(Tensile Strength Rm , MPa Nominal Thickness- ≥ 3 ≤ 50)	-	6500	-
Cl-8.1 & 8.4, Table 7(Tensile Strength Rm , MPa Nominal Thickness- > 50 ≤ 100)	-	0	-
Cl-8.1 & 8.4, Table 7(Tensile Strength Rm , MPa Nominal Thickness- > 100 ≤ 125 )	-	0	-
Cl-8.1 & 8.4, Table 7(Tensile Strength Rm , MPa Nominal Thickness- > 125 ≤ 200)	-	0	-
Cl-8.1 & 8.4, Table 7(Elongation A, Percentage Min at Gauge Length, Lo = 5.65√So- ≥ 3 ≤ 200)	-	0	-
Cl-8.2(Location of Samples and Orientation of Test Pieces)	-	0	-
Cl-8.3(Tensile Test Pieces)	-	0	-
Cl-8.4(Tensile Test)	-	6499.99	-
Cl-9 & 9.4(Transverse Charpy V-notch properties a,c S Grades)	-	8100	-
Cl-9 & 9.4(Longitudinal Charpy V-notch properties SG Grades)	-	8100	-
Cl-9.1(Preparation of Impact Test Pieces (V-notch test))	-	0	-
Cl-10.1(Weldability)	-	0	-
Cl-10.2.1(Hot-Forming)	-	0	-
Cl-10.2.3(Flangeability)	-	2500	-
Cl-10.3(Hot-Dip Zinc-Coating)	-	0	-
Cl-11(Internal Soundness (Ultrasonic testing))	-	4500	-
Cl-12.1(Re-Tests )	-	30500	-
Cl-12.2(Re-Heat Treatment)	-	0	-
Cl-13(Freedom From Defect)	-	1000	-
Cl-14(Dimensions )	-	1000	-
Cl-15(Tolerances)	-	1000	-
Cl-16(Calculation of Mass )	-	1000	-
Cl-18(Marking and Packing )	-	0	-
Cl-10.2.2(Cold Formability)	-	0	-

-
included w.e.f 17.08.2026

621

Gravitas Laboratories Private Limited, Greater Noida

8182606

IS 2062 (Part 1) (2025)

Structural Steel - Part 1 - Hot Rolled Medium and High tensile Steel

All

30500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-6(MANUFACTURE)	-	0	-
Cl-7(FREEDOM FROM DEFECTS)	-	1000	-
Cl-8.1(Ladle Analysis)	-	9000	-
Cl-8.1 & 8.2, Table-1(Ladle Analysis-C)	-	0	-
Cl-8.1 & 8.2, Table-1(Ladle Analysis- Mn)	-	0	-
Cl-8.1 & 8.2, Table-1(Ladle Analysis- S)	-	0	-
Cl-8.1 & 8.2, Table-1(Ladle Analysis- P)	-	0	-
Cl-8.1 & 8.2, Table-1(Ladle Analysis- Si )	-	0	-
Cl-8.1 & 8.2, Table-1(Carbon Equivalen t (CE), Max)	-	399.99	-
Cl-8.1 & 8.2, Note-1(Total aluminium)	-	0	-
Cl-8.1 & 8.2, Note-5(Nb)	-	0	-
Cl-8.1 & 8.2, Note-5(V)	-	0	-
Cl-8.1 & 8.2, Note-5(Ti)	-	0	-
Cl-8.1 & 8.2, Note-6(B)	-	0	-
Cl-8.2, Table 2 (i)(Carbon)	-	0	-
Cl-8.2, Table 2 (ii)(Manganese)	-	0	-
Cl-8.2, Table 2 (iii)(Sulphur)	-	0	-
Cl-8.2, Table 2 (iv)(Phosphorus)	-	0	-
Cl-8.2, Table 2 (v)(Silicon)	-	0	-
Cl-8.2, Table 2 (vi)(Copper)	-	0	-
Cl-8.2, Table 2 (vii)(Vanadium)	-	0	-
Cl-8.2, Table 2 (viii)(Niobium)	-	0	-
Cl-8.2, Table 2 (ix)(Titanium)	-	0	-
Cl-8.2, Table 2 (x)(Nitrogen)	-	0	-
Cl-10.1(Number of Tensile Tests)	-	6500	-
Cl-10.2(Tensile Test Pieces)	-	0	-
Cl-10.3, 10.3.1, 11.3.1, 12.2, 12.4 & 12.5, Table-3(Tensile Strength Rm, Min MPa7)	-	0	-
Cl-10.3, 10.3.1, 11.3.1, 12.2, 12.4 & 12.5, Table-3(Yield Stress ReH, Min MPa7)	-	0	-
Cl-10.3, 10.3.1, 11.3.1, 12.2, 12.4 & 12.5, Table-3(Percentage Elongation A, Min at Gauge Length, L0=5.65√So)	-	0	-
Cl-10.3, 10.3.1, 11.3.1, 12.2, 12.4 & 12.5, Table-3(Internal Bend Diameter Max)	-	0	-
Cl-10.3, 10.3.1, 11.3.1, 12.2, 12.4 & 12.5, Table-3(Charpy Impact Test-Temp°C)	-	0	-
Cl-10.3, 10.3.1, 11.3.1, 12.2, 12.4 & 12.5, Table-3(Charpy Impact Test- Min J)	-	0	-
Cl-11.1(Number of Bend Tests)	-	0	-
Cl-11.2(Bend Test Piece)	-	0	-
Cl-11.3(Bend Test )	-	2500	-
Cl-12(Impact Test )	-	8100	-
Cl-14, Table-4 (i)(Beam, column, channel and angle sections including parallel beam and column sections)	-	1000	-
Cl-14, Table-4 (ii)(Tee bars)	-	1000	-
Cl-14, Table-4 (iii)(Bulb angles)	-	1000	-
Cl-14, Table-4 (iv)(Plates, sheets, strips and flats)	-	1000	-
Cl-14, Table-4 (vi)(Round and square bars)	-	1000	-
Cl-14, Table-4 (vii)(Bulb flats)	-	1000	-
Cl-14, Table-4 (viii)(Sheet piling sections)	-	1000	-
Cl-14, Table-4 (ix)(Channel sections)	-	1000	-
Cl-13(Other TestsNondestructive testing, Metallurgical tests )	-	0	Grain Size Rs.4500 Ultrasonic Test Rs. 4000
Cl-13.3(Strength of joint )	-	0	4500
Cl-15(Tolerances)	-	1000	-
Cl-16.1(Retests)	-	30500	-
Cl-16.2(Re-heat Treatment)	-	0	-

-
-

622

Samridhi Test House Pvt. Ltd.

8184706

IS 7098 : Part 1 (2025)

Crosslinked Polyethylene Insulated Thermoplastic Sheathed Cables - Specification Part 1 For Working Voltages up to and Including 1 100 Volts (Second Revision)

14800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(Conductors -Material)	-	200	-
Cl-5, Table-1 (i)(Tensile strength)	-	200	-
Cl-5, Table-1 (ii) (a)(Elongation at break- Ageing in air oven)	-	200	-
Cl-5, Table-1 (ii) (b)(Variation in tensile strength, from that without ageing)	-	200	-
Cl-5, Table-1 (ii) (c)(Variation in elongation at break, from that without ageing)	-	200	-
Cl-5, Table-1 (iii) (a)(Hot set- Treatment;)	-	200	-
Cl-5, Table-1 (iii) (b)(Hot set- Elongation under load)	-	200	-
Cl-5, Table-1 (iii) (c)(Hot set- Permanent elongation after cooling)	-	200	-
Cl-5, Table-1 (iv)(Shrinkage)	-	200	-
Cl-5, Table-1 (v)(Water absorption (gravimetric))	-	200	-
Cl-5, Table-1 (vi)(Volume resistivity)	-	200	-
Cl-6.1 (a)(Fillers and inner sheath- Vulcanized or unvulcanized rubber)	-	200	-
Cl-6.1 (B)(Fillers and inner sheath- Thermoplastic materials)	-	200	-
Cl-7(Armouring)	-	200	-
Cl-8(Outer Sheath)	-	200	-
Cl-10.3(Tolerance on Thickness of Insulation)	-	200	-
Cl-11(Core Identification)	-	200	-
Cl-12(Laying up of Cores)	-	200	-
Cl-13(Inner Sheath (Common Covering))	-	200	-
Cl-14.1(Armouring- Application)	-	200	-
Cl-14.1.2(armour round wires/formed wires)	-	200	-
Cl-14.2(Type of Armour)	-	200	-
Cl-14.3(Dimensions)	-	200	-
Cl-14.4(Joints)	-	200	-
Cl-14.5(Resistance)	-	200	-
Cl-15.3(Thickness of Outer Sheath)	-	200	-
Cl-16.1 (i) (a)(Test on conductor: Annealing test (for copper);)	-	200	-
Cl-16.1 (i) (b)(Test on conductor: Tensile test (for aluminium);)	-	150	-
Cl-16.1 (i) (c)(Test on conductor: Wrapping test (for aluminium);)	-	250	-
Cl-16.1 (i) (d)(Test on conductor: Resistance test)	-	250	-
Cl-14.6 (a)(Physical tests on round wires/formed wires- Tensile strength)	-	250	-
Cl-14.6 (b)(Physical tests on round wires/formed wires- Elongation at break)	-	250	-
Cl-14.6 (c)(Physical tests on round wires/formed wires- Torsion test for round wires)	-	250	-
Cl-14.6 (d)(Physical tests on round wires/formed wires- Winding test for formed wires)	-	250	-
Cl-14.6 (e)(Physical tests on round wires/formed wires- Uniformity of zinc coating)	-	250	-
Cl-14.6 (f)(Physical tests on round wires/formed wires- Mass of zinc coating)	-	250	-
Cl-14.6 (g)(Physical tests on round wires/formed wires- Resistivity.)	-	250	-
Cl-10, 13, 15(Test for thickness of insulation and sheath)	-	500	-
Cl-16.1 (v) (1)(PVC Sheath- Tensile strength and elongation at break;)	-	250	-
Cl-16.1 (v) (2)(PVC Sheath- Ageing in air oven)	-	250	-
Cl-16.1 (v) (3)(PVC Sheath- Loss of mass in air oven)	-	250	-
Cl-16.1 (v) (5)(PVC Sheath- Hot deformation test)	-	250	-
Cl-16.1 (v) (6)(PVC Sheath- Heat shock test)	-	250	-
Cl-16.1 (v) (7)(PVC Sheath- Thermal stability)	-	250	-
Cl-8.3-Table 1A(PE Sheath- Carbon black content)	-	250	-
Cl-8.3-Table 1A(PE Sheath- Tensile strength and elongation at break before and after ageing)	-	250	-
Cl-8.3-Table 1A(PE Sheath- Hot deformation)	-	250	-
Cl-8.3-Table 1A(PE Sheath- Shrinkage test.)	-	250	-
Cl- Table 1B(LSHF Sheath- Tensile strength and elongation at break before and after ageing)	-	250	-
Cl- Table 1B(LSHF Sheath- Hot deformation)	-	250	-
Cl- Table 1B(LSHF Sheath- Water absorption test)	-	250	-
Cl- Table 1B(LSHF Sheath- Shrinkage test)	-	250	-
Cl-17.2(High voltage test)	-	250	-
Cl-17.3(Flammability test)	-	250	-
Cl-17.4(Oxygen index test (FR, FR-LSH or LSHF Sheath))	-	0	-
Cl-17.5(Flame retardance test on single cable)	-	0	-
Cl-17.6(Flame retardance test on bunched cables (FR, FR-LSH or LSHF Sheathed Cables))	-	0	-
Cl-17.7(Test for halogen acid evolution (FR-LSH or LSHF Outer Sheath))	-	0	-
Cl-17.8(Smoke density test (FR-LSH or LSHF Sheath))	-	0	-
Cl-17.9(Temperature index test; (FR, FR-LSH or LSHF Sheath))	-	0	-
Cl-17.10(Test for pH and conductivity of LSHF Sheath)	-	250	-
Cl-17.11(Test for light transmission for LSHF Sheathed Cables)	-	250	-
Cl-16.4 (i)(Cold bend test for outer sheath)	-	250	-
Cl-16.4 (ii)(Cold impact test for outer sheath)	-	250	-
Cl-16.4 (iii)(Cold elongation test for LSHF sheath)	-	250	-
Cl. 9(Conductor - Regarding Construction Compliance)	-	250	-
Cl. 10.4(Application of Insulation)	-	250	-
Cl. 13.3(Thickness of Inner sheath)	-	250	-
Cl. 15.1(Application of Outer sheath)	-	250	-
Cl. 15.2(Clour of Outer sheath)	-	250	-
Cl-4(Conductors -Material)	-	0	-
Cl-5, Table-1 (i)(Tensile strength)	-	0	-
Cl-5, Table-1 (ii) (a)(Elongation at break- Ageing in air oven)	-	0	-
Cl-5, Table-1 (ii) (b)(Variation in tensile strength, from that without ageing)	-	0	-
Cl-5, Table-1 (ii) (c)(Variation in elongation at break, from that without ageing)	-	0	-
Cl-5, Table-1 (iii) (a)(Hot set- Treatment;)	-	0	-
Cl-5, Table-1 (iii) (b)(Hot set- Elongation under load)	-	0	-
Cl-5, Table-1 (iii) (c)(Hot set- Permanent elongation after cooling)	-	0	-
Cl-5, Table-1 (iv)(Shrinkage)	-	0	-
Cl-5, Table-1 (v)(Water absorption (gravimetric))	-	0	-
Cl-5, Table-1 (vi)(Volume resistivity)	-	0	-
Cl-6.1 (a)(Fillers and inner sheath- Vulcanized or unvulcanized rubber)	-	0	-
Cl-6.1 (B)(Fillers and inner sheath- Thermoplastic materials)	-	0	-
Cl-7(Armouring)	-	0	-
Cl-8(Outer Sheath)	-	0	-
Cl-10.3(Tolerance on Thickness of Insulation)	-	0	-
Cl-11(Core Identification)	-	0	-
Cl-12(Laying up of Cores)	-	0	-
Cl-13(Inner Sheath (Common Covering))	-	0	-
Cl-14.1(Armouring- Application)	-	0	-
Cl-14.1.2(armour round wires/formed wires)	-	0	-
Cl-14.2(Type of Armour)	-	0	-
Cl-14.3(Dimensions)	-	0	-
Cl-14.4(Joints)	-	0	-
Cl-14.5(Resistance)	-	0	-
Cl-15.3(Thickness of Outer Sheath)	-	0	-
Cl-16.1 (i) (a)(Test on conductor: Annealing test (for copper);)	-	0	-
Cl-16.1 (i) (b)(Test on conductor: Tensile test (for aluminium);)	-	0	-
Cl-16.1 (i) (c)(Test on conductor: Wrapping test (for aluminium);)	-	0	-
Cl-16.1 (i) (d)(Test on conductor: Resistance test)	-	0	-
Cl-14.6 (a)(Physical tests on round wires/formed wires- Tensile strength)	-	0	-
Cl-14.6 (b)(Physical tests on round wires/formed wires- Elongation at break)	-	0	-
Cl-14.6 (c)(Physical tests on round wires/formed wires- Torsion test for round wires)	-	0	-
Cl-14.6 (d)(Physical tests on round wires/formed wires- Winding test for formed wires)	-	0	-
Cl-14.6 (e)(Physical tests on round wires/formed wires- Uniformity of zinc coating)	-	0	-
Cl-14.6 (f)(Physical tests on round wires/formed wires- Mass of zinc coating)	-	0	-
Cl-14.6 (g)(Physical tests on round wires/formed wires- Resistivity.)	-	0	-
Cl-10, 13, 15(Test for thickness of insulation and sheath)	-	0	-
Cl-16.1 (v) (1)(PVC Sheath- Tensile strength and elongation at break;)	-	0	-
Cl-16.1 (v) (2)(PVC Sheath- Ageing in air oven)	-	0	-
Cl-16.1 (v) (3)(PVC Sheath- Loss of mass in air oven)	-	0	-
Cl-16.1 (v) (5)(PVC Sheath- Hot deformation test)	-	0	-
Cl-16.1 (v) (6)(PVC Sheath- Heat shock test)	-	0	-
Cl-16.1 (v) (7)(PVC Sheath- Thermal stability)	-	0	-
Cl-8.3-Table 1A(PE Sheath- Carbon black content)	-	0	-
Cl-8.3-Table 1A(PE Sheath- Tensile strength and elongation at break before and after ageing)	-	0	-
Cl-8.3-Table 1A(PE Sheath- Hot deformation)	-	0	-
Cl-8.3-Table 1A(PE Sheath- Shrinkage test.)	-	0	-
Cl- Table 1B(LSHF Sheath- Tensile strength and elongation at break before and after ageing)	-	0	-
Cl- Table 1B(LSHF Sheath- Hot deformation)	-	0	-
Cl- Table 1B(LSHF Sheath- Water absorption test)	-	0	-
Cl- Table 1B(LSHF Sheath- Shrinkage test)	-	0	-
Cl-17.2(High voltage test)	-	0	-
Cl-17.3(Flammability test)	-	0	-
Cl-17.4(Oxygen index test (FR, FR-LSH or LSHF Sheath))	-	0	-
Cl-17.5(Flame retardance test on single cable)	-	0	-
Cl-17.6(Flame retardance test on bunched cables (FR, FR-LSH or LSHF Sheathed Cables))	-	0	-
Cl-17.7(Test for halogen acid evolution (FR-LSH or LSHF Outer Sheath))	-	0	-
Cl-17.8(Smoke density test (FR-LSH or LSHF Sheath))	-	0	-
Cl-17.9(Temperature index test; (FR, FR-LSH or LSHF Sheath))	-	0	-
Cl-17.10(Test for pH and conductivity of LSHF Sheath)	-	0	-
Cl-17.11(Test for light transmission for LSHF Sheathed Cables)	-	0	-
Cl-16.4 (i)(Cold bend test for outer sheath)	-	0	-
Cl-16.4 (ii)(Cold impact test for outer sheath)	-	0	-
Cl-16.4 (iii)(Cold elongation test for LSHF sheath)	-	0	-
Cl. 9(Conductor - Regarding Construction Compliance)	-	0	-
Cl. 10.4(Application of Insulation)	-	0	-
Cl. 13.3(Thickness of Inner sheath)	-	0	-
Cl. 15.1(Application of Outer sheath)	-	0	-
Cl. 15.2(Clour of Outer sheath)	-	0	-
Cl-4(Conductors -Material)	-	0	-
Cl-5, Table-1 (i)(Tensile strength)	-	0	-
Cl-5, Table-1 (ii) (a)(Elongation at break- Ageing in air oven)	-	0	-
Cl-5, Table-1 (ii) (b)(Variation in tensile strength, from that without ageing)	-	0	-
Cl-5, Table-1 (ii) (c)(Variation in elongation at break, from that without ageing)	-	0	-
Cl-5, Table-1 (iii) (a)(Hot set- Treatment;)	-	0	-
Cl-5, Table-1 (iii) (b)(Hot set- Elongation under load)	-	0	-
Cl-5, Table-1 (iii) (c)(Hot set- Permanent elongation after cooling)	-	0	-
Cl-5, Table-1 (iv)(Shrinkage)	-	0	-
Cl-5, Table-1 (v)(Water absorption (gravimetric))	-	0	-
Cl-5, Table-1 (vi)(Volume resistivity)	-	0	-
Cl-6.1 (a)(Fillers and inner sheath- Vulcanized or unvulcanized rubber)	-	0	-
Cl-6.1 (B)(Fillers and inner sheath- Thermoplastic materials)	-	0	-
Cl-7(Armouring)	-	0	-
Cl-8(Outer Sheath)	-	0	-
Cl-10.3(Tolerance on Thickness of Insulation)	-	0	-
Cl-11(Core Identification)	-	0	-
Cl-12(Laying up of Cores)	-	0	-
Cl-13(Inner Sheath (Common Covering))	-	0	-
Cl-14.1(Armouring- Application)	-	0	-
Cl-14.1.2(armour round wires/formed wires)	-	0	-
Cl-14.2(Type of Armour)	-	0	-
Cl-14.3(Dimensions)	-	0	-
Cl-14.4(Joints)	-	0	-
Cl-14.5(Resistance)	-	0	-
Cl-15.3(Thickness of Outer Sheath)	-	0	-
Cl-16.1 (i) (a)(Test on conductor: Annealing test (for copper);)	-	0	-
Cl-16.1 (i) (b)(Test on conductor: Tensile test (for aluminium);)	-	0	-
Cl-16.1 (i) (c)(Test on conductor: Wrapping test (for aluminium);)	-	0	-
Cl-16.1 (i) (d)(Test on conductor: Resistance test)	-	0	-
Cl-14.6 (a)(Physical tests on round wires/formed wires- Tensile strength)	-	0	-
Cl-14.6 (b)(Physical tests on round wires/formed wires- Elongation at break)	-	0	-
Cl-14.6 (c)(Physical tests on round wires/formed wires- Torsion test for round wires)	-	0	-
Cl-14.6 (d)(Physical tests on round wires/formed wires- Winding test for formed wires)	-	0	-
Cl-14.6 (e)(Physical tests on round wires/formed wires- Uniformity of zinc coating)	-	0	-
Cl-14.6 (f)(Physical tests on round wires/formed wires- Mass of zinc coating)	-	0	-
Cl-14.6 (g)(Physical tests on round wires/formed wires- Resistivity.)	-	0	-
Cl-10, 13, 15(Test for thickness of insulation and sheath)	-	0	-
Cl-16.1 (v) (1)(PVC Sheath- Tensile strength and elongation at break;)	-	0	-
Cl-16.1 (v) (2)(PVC Sheath- Ageing in air oven)	-	0	-
Cl-16.1 (v) (3)(PVC Sheath- Loss of mass in air oven)	-	0	-
Cl-16.1 (v) (5)(PVC Sheath- Hot deformation test)	-	0	-
Cl-16.1 (v) (6)(PVC Sheath- Heat shock test)	-	0	-
Cl-16.1 (v) (7)(PVC Sheath- Thermal stability)	-	0	-
Cl-8.3-Table 1A(PE Sheath- Carbon black content)	-	0	-
Cl-8.3-Table 1A(PE Sheath- Tensile strength and elongation at break before and after ageing)	-	0	-
Cl-8.3-Table 1A(PE Sheath- Hot deformation)	-	0	-
Cl-8.3-Table 1A(PE Sheath- Shrinkage test.)	-	0	-
Cl- Table 1B(LSHF Sheath- Tensile strength and elongation at break before and after ageing)	-	0	-
Cl- Table 1B(LSHF Sheath- Hot deformation)	-	0	-
Cl- Table 1B(LSHF Sheath- Water absorption test)	-	0	-
Cl- Table 1B(LSHF Sheath- Shrinkage test)	-	0	-
Cl-17.2(High voltage test)	-	0	-
Cl-17.3(Flammability test)	-	0	-
Cl-17.4(Oxygen index test (FR, FR-LSH or LSHF Sheath))	-	0	-
Cl-17.5(Flame retardance test on single cable)	-	0	-
Cl-17.6(Flame retardance test on bunched cables (FR, FR-LSH or LSHF Sheathed Cables))	-	0	-
Cl-17.7(Test for halogen acid evolution (FR-LSH or LSHF Outer Sheath))	-	0	-
Cl-17.8(Smoke density test (FR-LSH or LSHF Sheath))	-	0	-
Cl-17.9(Temperature index test; (FR, FR-LSH or LSHF Sheath))	-	0	-
Cl-17.10(Test for pH and conductivity of LSHF Sheath)	-	0	-
Cl-17.11(Test for light transmission for LSHF Sheathed Cables)	-	0	-
Cl-16.4 (i)(Cold bend test for outer sheath)	-	0	-
Cl-16.4 (ii)(Cold impact test for outer sheath)	-	0	-
Cl-16.4 (iii)(Cold elongation test for LSHF sheath)	-	0	-
Cl. 9(Conductor - Regarding Construction Compliance)	-	0	-
Cl. 10.4(Application of Insulation)	-	0	-
Cl. 13.3(Thickness of Inner sheath)	-	0	-
Cl. 15.1(Application of Outer sheath)	-	0	-
Cl. 15.2(Clour of Outer sheath)	-	0	-
Cl-4(Conductors -Material)	-	0	-
Cl-5, Table-1 (i)(Tensile strength)	-	0	-
Cl-5, Table-1 (ii) (a)(Elongation at break- Ageing in air oven)	-	0	-
Cl-5, Table-1 (ii) (b)(Variation in tensile strength, from that without ageing)	-	0	-
Cl-5, Table-1 (ii) (c)(Variation in elongation at break, from that without ageing)	-	0	-
Cl-5, Table-1 (iii) (a)(Hot set- Treatment;)	-	0	-
Cl-5, Table-1 (iii) (b)(Hot set- Elongation under load)	-	0	-
Cl-5, Table-1 (iii) (c)(Hot set- Permanent elongation after cooling)	-	0	-
Cl-5, Table-1 (iv)(Shrinkage)	-	0	-
Cl-5, Table-1 (v)(Water absorption (gravimetric))	-	0	-
Cl-5, Table-1 (vi)(Volume resistivity)	-	0	-
Cl-6.1 (a)(Fillers and inner sheath- Vulcanized or unvulcanized rubber)	-	0	-
Cl-6.1 (B)(Fillers and inner sheath- Thermoplastic materials)	-	0	-
Cl-7(Armouring)	-	0	-
Cl-8(Outer Sheath)	-	0	-
Cl-10.3(Tolerance on Thickness of Insulation)	-	0	-
Cl-11(Core Identification)	-	0	-
Cl-12(Laying up of Cores)	-	0	-
Cl-13(Inner Sheath (Common Covering))	-	0	-
Cl-14.1(Armouring- Application)	-	0	-
Cl-14.1.2(armour round wires/formed wires)	-	0	-
Cl-14.2(Type of Armour)	-	0	-
Cl-14.3(Dimensions)	-	0	-
Cl-14.4(Joints)	-	0	-
Cl-14.5(Resistance)	-	0	-
Cl-15.3(Thickness of Outer Sheath)	-	0	-
Cl-16.1 (i) (a)(Test on conductor: Annealing test (for copper);)	-	0	-
Cl-16.1 (i) (b)(Test on conductor: Tensile test (for aluminium);)	-	0	-
Cl-16.1 (i) (c)(Test on conductor: Wrapping test (for aluminium);)	-	0	-
Cl-16.1 (i) (d)(Test on conductor: Resistance test)	-	0	-
Cl-14.6 (a)(Physical tests on round wires/formed wires- Tensile strength)	-	0	-
Cl-14.6 (b)(Physical tests on round wires/formed wires- Elongation at break)	-	0	-
Cl-14.6 (c)(Physical tests on round wires/formed wires- Torsion test for round wires)	-	0	-
Cl-14.6 (d)(Physical tests on round wires/formed wires- Winding test for formed wires)	-	0	-
Cl-14.6 (e)(Physical tests on round wires/formed wires- Uniformity of zinc coating)	-	0	-
Cl-14.6 (f)(Physical tests on round wires/formed wires- Mass of zinc coating)	-	0	-
Cl-14.6 (g)(Physical tests on round wires/formed wires- Resistivity.)	-	0	-
Cl-10, 13, 15(Test for thickness of insulation and sheath)	-	0	-
Cl-16.1 (v) (1)(PVC Sheath- Tensile strength and elongation at break;)	-	0	-
Cl-16.1 (v) (2)(PVC Sheath- Ageing in air oven)	-	0	-
Cl-16.1 (v) (3)(PVC Sheath- Loss of mass in air oven)	-	0	-
Cl-16.1 (v) (5)(PVC Sheath- Hot deformation test)	-	0	-
Cl-16.1 (v) (6)(PVC Sheath- Heat shock test)	-	0	-
Cl-16.1 (v) (7)(PVC Sheath- Thermal stability)	-	0	-
Cl-8.3-Table 1A(PE Sheath- Carbon black content)	-	0	-
Cl-8.3-Table 1A(PE Sheath- Tensile strength and elongation at break before and after ageing)	-	0	-
Cl-8.3-Table 1A(PE Sheath- Hot deformation)	-	0	-
Cl-8.3-Table 1A(PE Sheath- Shrinkage test.)	-	0	-
Cl- Table 1B(LSHF Sheath- Tensile strength and elongation at break before and after ageing)	-	0	-
Cl- Table 1B(LSHF Sheath- Hot deformation)	-	0	-
Cl- Table 1B(LSHF Sheath- Water absorption test)	-	0	-
Cl- Table 1B(LSHF Sheath- Shrinkage test)	-	0	-
Cl-17.2(High voltage test)	-	0	-
Cl-17.3(Flammability test)	-	0	-
Cl-17.4(Oxygen index test (FR, FR-LSH or LSHF Sheath))	-	0	-
Cl-17.5(Flame retardance test on single cable)	-	0	-
Cl-17.6(Flame retardance test on bunched cables (FR, FR-LSH or LSHF Sheathed Cables))	-	0	-
Cl-17.7(Test for halogen acid evolution (FR-LSH or LSHF Outer Sheath))	-	0	-
Cl-17.8(Smoke density test (FR-LSH or LSHF Sheath))	-	0	-
Cl-17.9(Temperature index test; (FR, FR-LSH or LSHF Sheath))	-	0	-
Cl-17.10(Test for pH and conductivity of LSHF Sheath)	-	0	-
Cl-17.11(Test for light transmission for LSHF Sheathed Cables)	-	0	-
Cl-16.4 (i)(Cold bend test for outer sheath)	-	0	-
Cl-16.4 (ii)(Cold impact test for outer sheath)	-	0	-
Cl-16.4 (iii)(Cold elongation test for LSHF sheath)	-	0	-
Cl. 9(Conductor - Regarding Construction Compliance)	-	0	-
Cl. 10.4(Application of Insulation)	-	0	-
Cl. 13.3(Thickness of Inner sheath)	-	0	-
Cl. 15.1(Application of Outer sheath)	-	0	-
Cl. 15.2(Clour of Outer sheath)	-	0	-

-
Included w.e.f 10.08.2026 Exclusion: "Cl-17.4 (Oxygen index test (FR, FR-LSH or LSHF Sheath)) Cl-17.6 (Flame retardance test on bunched cables (FR, FR-LSH or LSHF Sheathed Cables)) Cl-17.7 (Test for halogen acid evolution (FR-LSH or LSHF Outer Sheath)) Cl-17.8 (Smoke density test (FR-LSH or LSHF Sheath)) Cl-17.9 (Temperature index test; (FR, FR-LSH or LSHF Sheath)) Cl-17.5 (Flame retardance test on single cable) Cl-17.11 (Test for light transmission for LSHF Sheathed Cables)"

623

Matrix Test Labs

8138626

IS 16046 : Part 2 (2018)

Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes ” Safety Requirements for Portable Sealed Secondary Cells and for Batteries Made from Them for Use in Portable Applications Part 2 Lithium Systems ( Second Revision )

200000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(General Safety Considerations)	-	5000	10% discount to BIS
6(Type Test and Sample Size)	-	5000	10% discount to BIS
7.1(Charging procedure for test purposes)	-	20000	10% discount to BIS
7.2(Intended Use)	-	35000	10% discount to BIS
7.3(Reasonably foreseeable misuse)	-	110000	10% discount to BIS
10(Packaging)	-	500	-
8.2(Small Cell and battery safety information)	-	5000	10% discount to BIS
5.8(Battery Safety Components)	-	15000	10% discount to BIS
9(Marking)	-	3000	10% discount to BIS
9.1(Cell Marking)	-	3000	10% discount to BIS
5.2(Insulation and Wiring)	-	5000	10% discount to BIS
5.3(Venting)	-	1000	10% discount to BIS
5.4(Temperature, Voltage and Current Management)	-	1000	10% discount to BIS
5.5(Terminal Contacts)	-	1000	10% discount to BIS
5.6(Assembly of Cells into batteries)	-	1000	10% discount to BIS
5.7(Quality Plan)	-	1000	10% discount to BIS
4(Parameter Measurement Tolerances)	-	500	10% discount to BIS
5.1(General)	-	1000	10% discount to BIS
8(Information for safety)	-	5000	10% discount to BIS
9.2(Battery Marking)	-	3000	10% discount to BIS
9.3(Caution for ingestion of small cells and batteries)	-	1000	10% discount to BIS
9.4(Other information)	-	500	10% discount to BIS
clause 7.3.1 of IS 16047: Part 3(Discharge performance at 20 °C (rated capacity))	-	20000	10% discount to BIS

31 Dec, 2029

-
-

624

Arihant Analytical Laboratory Pvt. Ltd., Sonipat

9167906

IS 17154 (2024)

Battery Operated Motorized Tricycle — Specification

All type

34000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-9(Marking)	-	34000	-
Cl-9(Marking)	-	34000	-
8.5(v)Test for finish)	-	34000	-
8.4(iv) Brake test)	-	34000	-
8.3(iii) Static load)	-	34000	-
8.2(ii) Manoeuverability)	-	34000	-
8.1(i) Road Test)	-	34000	-
8(TESTS)	-	34000	-
7(Finish)	-	34000	-
6(Requirements)	-	34000	-
4(Shape and Dimensions)	-	34000	-
Cl-8.5(Test for Finish)	-	34000	-
Cl-8.4(Brake Test)	-	34000	-
Cl-8.3(Static Load Test)	-	34000	-
Cl-8.2(Manoeuvrability)	-	34000	-
Cl-8.1(Road Test)	-	34000	-
Cl-7(Foinish)	-	34000	-
Cl-6.15(Servicing and Adjustment)	-	34000	-
Cl-6.14(Accessories)	-	34000	-
Cl-6.12(Lubrication)	-	34000	-
Cl-6.11(Armrest)	-	34000	-
Cl-6.10(Tool Box)	-	34000	-
Cl-6.9(Rear Wheel Hub)	-	34000	-
Cl-6.8(Front Wheel Hub)	-	34000	-
Cl-6.7(Brakes)	-	34000	-
Cl-6.6(Mudguards)	-	34000	-
Cl-6.5(Wheel Rims)	-	34000	-
Cl-6.4(Tyres and Tubes)	-	34000	-
Cl-6.3(Driving Mechanism)	-	34000	-
Cl-6.2(Steering Handle Bar)	-	34000	-
Cl-6.1(Frame)	-	34000	-
Cl-5.7(Timber)	-	34000	-
Cl-5.6(metallic components)	-	34000	-
Cl-5.5(Spring Wire)	-	34000	-
Cl-5.4.3(Tool Box)	-	34000	-
Cl-5.4.2(Seat Walls)	-	34000	-
Cl-5.4.1(Foot Rest)	-	34000	-
Cl-5.3.2(Back Rest)	-	34000	-
Cl-5.3.1(Seat)	-	34000	-
Cl-5.2(Standard Tricycle Components)	-	34000	-
5(Material)	-	34000	-
Cl-4(Shape and dimensions)	-	34000	-
Cl-5.1(Tubing)	-	34000	-
Cl-9(Marking)	-	34000	-
Cl-9(Marking)	-	34000	-
8.5(v)Test for finish)	-	34000	-
8.4(iv) Brake test)	-	34000	-
8.3(iii) Static load)	-	34000	-
8.2(ii) Manoeuverability)	-	34000	-
8.1(i) Road Test)	-	34000	-
8(TESTS)	-	34000	-
7(Finish)	-	34000	-
6(Requirements)	-	34000	-
4(Shape and Dimensions)	-	34000	-
Cl-8.5(Test for Finish)	-	34000	-
Cl-8.4(Brake Test)	-	34000	-
Cl-8.3(Static Load Test)	-	34000	-
Cl-8.2(Manoeuvrability)	-	34000	-
Cl-8.1(Road Test)	-	34000	-
Cl-7(Foinish)	-	34000	-
Cl-6.15(Servicing and Adjustment)	-	34000	-
Cl-6.14(Accessories)	-	34000	-
Cl-6.12(Lubrication)	-	34000	-
Cl-6.11(Armrest)	-	34000	-
Cl-6.10(Tool Box)	-	34000	-
Cl-6.9(Rear Wheel Hub)	-	34000	-
Cl-6.8(Front Wheel Hub)	-	34000	-
Cl-6.7(Brakes)	-	34000	-
Cl-6.6(Mudguards)	-	34000	-
Cl-6.5(Wheel Rims)	-	34000	-
Cl-6.3(Driving Mechanism)	-	34000	-
Cl-6.2(Steering Handle Bar)	-	34000	-
Cl-6.1(Frame)	-	34000	-
Cl-5.7(Timber)	-	34000	-
Cl-5.6(metallic components)	-	34000	-
Cl-5.5(Spring Wire)	-	34000	-
Cl-5.4.3(Tool Box)	-	34000	-
Cl-5.4.2(Seat Walls)	-	34000	-
Cl-5.4.1(Foot Rest)	-	34000	-
Cl-5.3.2(Back Rest)	-	34000	-
Cl-5.3.1(Seat)	-	34000	-
Cl-5.2(Standard Tricycle Components)	-	34000	-
5(Material)	-	34000	-
Cl-4(Shape and dimensions)	-	34000	-
Cl-5.1(Tubing)	-	34000	-
Cl-6.4(Tyres and Tubes)	-	34000	-
Cl-9(Marking)	-	34000	-
Cl-9(Marking)	-	34000	-
8.5(v)Test for finish)	-	34000	-
8.4(iv) Brake test)	-	34000	-
8.3(iii) Static load)	-	34000	-
8.2(ii) Manoeuverability)	-	34000	-
8.1(i) Road Test)	-	34000	-
8(TESTS)	-	34000	-
7(Finish)	-	34000	-
6(Requirements)	-	34000	-
4(Shape and Dimensions)	-	34000	-
Cl-8.5(Test for Finish)	-	34000	-
Cl-8.4(Brake Test)	-	34000	-
Cl-8.3(Static Load Test)	-	34000	-
Cl-8.2(Manoeuvrability)	-	34000	-
Cl-8.1(Road Test)	-	34000	-
Cl-7(Foinish)	-	34000	-
Cl-6.15(Servicing and Adjustment)	-	34000	-
Cl-6.14(Accessories)	-	34000	-
Cl-6.12(Lubrication)	-	34000	-
Cl-6.11(Armrest)	-	34000	-
Cl-6.10(Tool Box)	-	34000	-
Cl-6.9(Rear Wheel Hub)	-	34000	-
Cl-6.8(Front Wheel Hub)	-	34000	-
Cl-6.7(Brakes)	-	34000	-
Cl-6.6(Mudguards)	-	34000	-
Cl-6.5(Wheel Rims)	-	34000	-
Cl-6.3(Driving Mechanism)	-	34000	-
Cl-6.2(Steering Handle Bar)	-	34000	-
Cl-6.1(Frame)	-	34000	-
Cl-5.7(Timber)	-	34000	-
Cl-5.6(metallic components)	-	34000	-
Cl-5.5(Spring Wire)	-	34000	-
Cl-5.4.3(Tool Box)	-	34000	-
Cl-5.4.2(Seat Walls)	-	34000	-
Cl-5.4.1(Foot Rest)	-	34000	-
Cl-5.3.2(Back Rest)	-	34000	-
Cl-5.3.1(Seat)	-	34000	-
Cl-5.2(Standard Tricycle Components)	-	34000	-
5(Material)	-	34000	-
Cl-4(Shape and dimensions)	-	34000	-
Cl-5.1(Tubing)	-	34000	-
Cl-6.4(Tyres and Tubes)	-	34000	-
Cl-9(Marking)	-	34000	-
Cl-9(Marking)	-	34000	-
8.5(v)Test for finish)	-	34000	-
8.4(iv) Brake test)	-	34000	-
8.3(iii) Static load)	-	34000	-
8.2(ii) Manoeuverability)	-	34000	-
8.1(i) Road Test)	-	34000	-
8(TESTS)	-	34000	-
7(Finish)	-	34000	-
6(Requirements)	-	34000	-
4(Shape and Dimensions)	-	34000	-
Cl-8.5(Test for Finish)	-	34000	-
Cl-8.4(Brake Test)	-	34000	-
Cl-8.3(Static Load Test)	-	34000	-
Cl-8.2(Manoeuvrability)	-	34000	-
Cl-8.1(Road Test)	-	34000	-
Cl-7(Foinish)	-	34000	-
Cl-6.15(Servicing and Adjustment)	-	34000	-
Cl-6.14(Accessories)	-	34000	-
Cl-6.12(Lubrication)	-	34000	-
Cl-6.11(Armrest)	-	34000	-
Cl-6.10(Tool Box)	-	34000	-
Cl-6.9(Rear Wheel Hub)	-	34000	-
Cl-6.8(Front Wheel Hub)	-	34000	-
Cl-6.7(Brakes)	-	34000	-
Cl-6.6(Mudguards)	-	34000	-
Cl-6.5(Wheel Rims)	-	34000	-
Cl-6.3(Driving Mechanism)	-	34000	-
Cl-6.2(Steering Handle Bar)	-	34000	-
Cl-6.1(Frame)	-	34000	-
Cl-5.7(Timber)	-	34000	-
Cl-5.6(metallic components)	-	34000	-
Cl-5.5(Spring Wire)	-	34000	-
Cl-5.4.3(Tool Box)	-	34000	-
Cl-5.4.2(Seat Walls)	-	34000	-
Cl-5.4.1(Foot Rest)	-	34000	-
Cl-5.3.2(Back Rest)	-	34000	-
Cl-5.3.1(Seat)	-	34000	-
Cl-5.2(Standard Tricycle Components)	-	34000	-
5(Material)	-	34000	-
Cl-4(Shape and dimensions)	-	34000	-
Cl-5.1(Tubing)	-	34000	-
Cl-6.4(Tyres and Tubes)	-	34000	-

02 Jun, 2027

-
included w.e.f 17.08.2026

625

EMC Testing and Compliance LLP, Gurugram

8141526

IS 10322 (Part 5/Sec 1) (2026)

Luminaires Part 5: Particular requirements Section 1: Fixed general purpose luminaires (Second Revision)

FGPL

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-1.4(General test requirements)	-	2000	-
Cl-1.6(Marking)	-	1999.98	-
Cl-1.7(Construction)	-	2000	-
Cl-1.8(Creepage distances and clearances)	-	5000	-
Cl-1.9(Provision for earthing)	-	5000	-
Cl-1.10(Terminals)	-	2000	-
Cl-1.11(External and internal wiring)	-	1999.98	-
Cl-1.12(Protection against electric shock)	-	2000	-
Cl-1.12(Protection against electric shock)	-	2000	-
Cl-1.13(Endurance tests and thermal tests)	-	5000	-
Cl-1.14(Resistance to dust, solid objects and moistur)	-	5000	-
Cl-1.15(" Insulation resistance and electric strength, touch current and protective conductor current")	-	5000	-
Cl-1.16(Resistance to heat, fire and tracking)	-	5000	-

19 Jul, 2027

-
included w.e.f 09.07.2026 Exclusion- Cl-1.7 (Construction) Photobiological Hazard

626

EKO PRO ENGINEERS PRIVATE LIMITED (32/37) GHAZIABAD

8164006

IS 613 (2000)

Copper rods and bars for electrical purposes - Specification (Third Revision)

ALL

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause no.3(SUPPLY OF MATERIAL)	-	9000	-
Clause no.6(FREEDOM FROM DEFECTS)	-	9000	-
Clause no.7(CONDITION OF SUPPLY)	-	9000	-
Clause no.8(CHEMICAL COMPOSITION)	-	9000	-
Clause no.9.1, table no,1(" tensile test ")	-	9000	-
Clause no.9.2(Bend test)	-	9000	-
"Clause no.10.1 and 11.1.1 Table No. 2"(Dimensions and Tolerances)	-	9000	-
"Clause no.10.2 and Table No. 3"("Tolerances on Length of Bar Rod in Straight Length ")	-	9000	-
"Clause no.10.4 and Table No. 4"(Corner Radius and Tolerances)	-	9000	-
"Clause no.11 and Table No. 5"(Electrical Resistivity)	-	9000	-
Clause no. 13(packing)	-	9000	-
Clause no. 14(Marking)	-	9000	-

27 May, 2028

-
Included w.e.f 22.06.2026

627

URS PRODUCTS AND TESTING PVT. LTD. (A29), NOIDA

8168906

IS 15809 (2017)

High visibility warning clothes – Specification (first revision)

44500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Classification)	-	1000	-
4.1(Types)	-	1000	-
4.2(classified based on the level of conspicuity)	-	1000	-
5(Requirements)	-	2000	-
5.1(Materials)	-	2500	-
5.2(Garment design)	-	2500	-
5.3(Colour )	-	1000	-
5.3(Colour Fastness of Background Material)	-	2000	-
5.3(Colour fastness of background materials after xenon test )	-	2000	-
5.3(Colour Fastness of Combined-Performance)	-	4500	-
5.4(Photometric and Physical Performance Requirements for Retroreflective and Combined- Performance Materials 5.4.1 Performance Requirements of Retroreflective)	-	15000	-
5.5(Mechanical Properties of Background Material)	-	3000	-
5.5.1(Tensile testing)	-	1000	-
5.5.2(Tear Resistance for Coated Fabric and Laminates)	-	1000	-
5.5.3(Bursting strength)	-	1000	-
6(Marking)	-	1000	-
4(Classification)	-	1000	-
4.1(Types)	-	1000	-
4.2(classified based on the level of conspicuity)	-	1000	-
5(Requirements)	-	1000	-
5.1(Materials)	-	1999.99	-
5.2(Garment design)	-	2499.99	-
5.3(Colour )	-	999.99	-
5.3(Colour Fastness of Background Material)	-	2500	-
5.3(Colour fastness of background materials after xenon test )	-	2500	-
5.3(Colour Fastness of Combined-Performance)	-	2000	-
5.3(Materials after Xenon Test)	-	2000	-
5.4(Photometric and Physical Performance Requirements for Retroreflective and Combined- Performance Materials 5.4.1 Performance Requirements of Retroreflective)	-	15000	-
5.5(Mechanical Properties of Background Material)	-	2999.99	-
5.5.1(Tensile testing)	-	999.99	-
5.5.2(Tear Resistance for Coated Fabric and Laminates)	-	1000	-
5.5.3(Bursting strength)	-	1000	-
6(Marking)	-	2000	-
4(Classification)	-	1000	-
4.1(Types)	-	1000	-
4.2(classified based on the level of conspicuity)	-	1999.99	-
5(Requirements)	-	1999.99	-
5.1(Materials)	-	1999.99	-
5.2(Garment design)	-	2499.99	-
5.3(Colour )	-	999.99	-
5.3(Colour Fastness of Background Material)	-	2999.99	-
5.3(Colour fastness of background materials after xenon test )	-	3000	-
5.3(Colour Fastness of Combined-Performance)	-	2000	-
5.3(Materials after Xenon Test)	-	1999.99	-
5.4(Photometric and Physical Performance Requirements for Retroreflective and Combined- Performance Materials 5.4.1 Performance Requirements of Retroreflective)	-	14999.99	-
5.5(Mechanical Properties of Background Material)	-	3000	-
5.5.1(Tensile testing)	-	999.99	-
5.5.2(Tear Resistance for Coated Fabric and Laminates)	-	999.99	-
5.5.3(Bursting strength)	-	999.99	-
6(Marking)	-	2499.99	-
4(Classification)	-	999.98	-
4.1(Types)	-	1000	-
4.2(classified based on the level of conspicuity)	-	999.99	-
5(Requirements)	-	1999.99	-
5.1(Materials)	-	1999.99	-
5.2(Garment design)	-	2499.99	-
5.3(Colour )	-	999.99	-
5.3(Colour Fastness of Background Material)	-	3000	-
5.3(Colour fastness of background materials after xenon test )	-	3000	-
5.3(Colour Fastness of Combined-Performance)	-	1999.99	-
5.3(Materials after Xenon Test)	-	2000	-
5.4(Photometric and Physical Performance Requirements for Retroreflective and Combined- Performance Materials 5.4.1 Performance Requirements of Retroreflective)	-	15000	-
5.5(Mechanical Properties of Background Material)	-	2999.99	-
5.5.1(Tensile testing)	-	1000	-
5.5.2(Tear Resistance for Coated Fabric and Laminates)	-	999.99	-
5.5.3(Bursting strength)	-	999.99	-
6(Marking)	-	2500	-
5.1(Resistance to Chemical)	-	2999.98	-
5.2(Garment Design)	-	2500	-
5.3.1.1/5.3.1.2(Colour of Background Material and Combined-Performance Retroreflective Material Prior to Exposure Tests, Table-4)	-	2000	-
5.3.2.1(Colour Fastness to Crocking)	-	750	-
5.3.2.2(Colour Fastness to Perspiration)	-	1000	-
5.3.2.3(Colour fastness to Laundering (Washing))	-	750	-
5.3.2.3(Colour fastness to Dry cleaning)	-	999.99	-
5.3.2.3(Colour fastness to Hypochlorite Bleaching)	-	999.98	-
5.3.2.3(Colour fastness to Water)	-	1000	-
5.3.2.3(Colour fastness to Hot pressing)	-	1500	-
5.3.2.4/5.3.3(Colour fastness of background materials after Xenon Tests)	-	2500	-
5.4.1(Performance requirements of Retroreflective and Combined-Performance Material prior to Test Exposure (C-3))	-	4000	-
5.4.2(Coefficient of Retro reflection ( After abrasion 5000 cycles), Table 6 (C-4.1))	-	15000	-
5.4.2(Coefficient of Retro reflection( After flexing 7500 cycles), Table 6 (C-4.2))	-	14999.98	-
5.4.2(Coefficient of Retro reflection( After exposure to Temperature Variation), Table 6 (C-4.3))	-	15000	-
5.4.2(Washing :50 Washing cycles (Pre-treatment), C-4.4 [As per IS 15370-2A followed by tumble dry delicate (A wash cycle is one wash and one drying))	-	15000	-
5.4.2("Coefficient of Retro reflection( After 50 washing Cycles),Table 6 (C-4.4) ")	-	14999.99	-
5.4.2(Coefficient of Retro reflection (under influence of rain fall), Table 6 (C-4.6))	-	14999.99	-
5.5.1.2(Tensile strength)	-	999.99	-
5.5.3(Bursting strength/Tear Strength)	-	999.99	-
5.5.3(Mass)	-	500	-
5.3(Materials after Xenon Test)	-	1999.99	-

-
Included w.e.f 31.08.2026

628

ALAIPURIA TEST HOUSE PRIVATE LIMITED, GHAZIABAD

8180426

IS 302 : Part 2 : Sec 74 (2024)

Household and Similar Electrical Appliancesï¿½Safety Part 2 Particular Requirements Section 74 Portable immersion heaters

-----

15500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	250	-
8(Protection against access to live parts)	-	500	-
10(Power input and current)	-	1000	-
10(Power input and current)	-	500	-
11(Heating)	-	999.99	-
13.1 &13.2(Leakage current test)	-	500	-
14(Transient overvoltages)	-	2000	-
15(Moisture resistance)	-	1000	-
16.1 &16.2(Leakage current test)	-	500	-
16.1 & 16.3(Electric strength test)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	500	-
19.1 to 19.13, Table No. - 9(Abnormal operation)	-	500	-
20.1(Stability and mechanical hazards)	-	1000	-
20.2(Stability and mechanical hazards)	-	500	-
21(Mechanical strength)	-	500	-
22(Construction)	-	500	-
23(Internal wiring)	-	500	-
24(Components)	-	1000	-
25("Supply connection and external flexible cords")	-	500	-
26("Terminals for external conductors")	-	450	-
27(Provision for earthing)	-	500	-
28(Screws and connections)	-	500	-
29("Clearances, creepage distances and solid insulation")	-	500	-
30(Resistance to heat and fire)	-	500	-
30.101(Resistance to heat and fire)	-	500	-
31(Resistance to rusting)	-	499.99	-
13.1 &13.3(Electric strength test)	-	500.01	-
15.3(Moisture resistance)	-	500	-
24.101(Components)	-	500	-
Cl 19.11.4.8(Abnormal operation)	-	500	-
7(Marking and instructions)	-	0	-
8(Protection against access to live parts)	-	0	-
10(Power input and current)	-	0	-
10(Power input and current)	-	0	-
11(Heating)	-	0	-
13.1 &13.2(Leakage current test)	-	0	-
14(Transient overvoltages)	-	0	-
15(Moisture resistance)	-	0	-
16.1 &16.2(Leakage current test)	-	0	-
16.1 & 16.3(Electric strength test)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	-
19.1 to 19.13, Table No. - 9(Abnormal operation)	-	0	-
20.1(Stability and mechanical hazards)	-	0	-
20.2(Stability and mechanical hazards)	-	0	-
21(Mechanical strength)	-	0	-
22(Construction)	-	0	-
23(Internal wiring)	-	0	-
24(Components)	-	0	-
25("Supply connection and external flexible cords")	-	0	-
26("Terminals for external conductors")	-	0	-
27(Provision for earthing)	-	0	-
28(Screws and connections)	-	0	-
29("Clearances, creepage distances and solid insulation")	-	0	-
30(Resistance to heat and fire)	-	0	-
30.101(Resistance to heat and fire)	-	0	-
31(Resistance to rusting)	-	0	-
13.1 &13.3(Electric strength test)	-	0	-
15.3(Moisture resistance)	-	0	-
24.101(Components)	-	0	-
Cl 19.11.4.8(Abnormal operation)	-	0	-

03 Oct, 2027

-
Included w.e.f 22.07.2026 Exclusions: 32 (""Radiation, toxicity and similar hazards""), Cl 19.11.4.1 (Electrostatic discharges), Cl 19.11.4.2 (Radiated fields), Cl 19.11.4.3 (Fast transient bursts), Cl 19.11.4.4 (Voltage surges), Cl 19.11.4.5 (Immunity to conducted disturbances), Cl 19.11.4.6 (Voltage dips and interruptions), Cl 19.11.4.7 (Harmonics and inter-harmonics)

629

Samridhi Test House Pvt. Ltd.

8184706

IS 9573 : Part 2 (2017)

Rubber hose for liquefied petroleum gas (Lpg) - Specification: Part 2 domestic and commercial application (Fourth Revision)

10900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4.1(General)	-	200	-
Clause 4.2(Material)	-	300	-
Clause 4.2.1(Lining)	-	200	-
Clause 4.2.2 (a)(Reinforcement)	-	200	-
Clause 4.2.2 (b)(Reinforcement)	-	200	-
Clause 4.2.3(Cover)	-	300	-
Clause 4.3 Sub Clause 4.3.1 Table 1(Bore Size)	-	200	-
Clause 4.3 Sub Clause 4.3.2 (a)(Thickness of Lining and Cover)	-	300	-
Clause 4.3 Sub Clause 4.3.2 (b)(Thickness of Lining and Cover)	-	300	-
Clause 4.3 Sub Clause 4.3.3(Length)	-	300	-
Clause 4.4 Sub Clause 4.4.1 Table 2 (i) (a)(Tensile Strength- Lining)	-	400	-
Clause 4.4 Sub Clause 4.4.1 Table 2 (i) (b)(Tensile Strength- cover)	-	350	-
Clause 4.4 Sub Clause 4.4.1 Table 2 (ii) (a)(Elongation at break- Lining)	-	400	-
Clause 4.4 Sub Clause 4.4.1 Table 2 (ii) (b)(Elongation at break- Cover)	-	300	-
Clause 4.4 Sub Clause 4.4.2 (a)(Accelerated Ageing Test lining)	-	400	-
Clause 4.4 Sub Clause 4.4.2 (b)(Accelerated Ageing Test lining)	-	350	-
Clause 4.4 Sub Clause 4.4.2 (a)(Accelerated Ageing Test cover)	-	350	-
Clause 4.4 Sub Clause 4.4.2 (b)(Accelerated Ageing Test cover)	-	350	-
Clause 4.4 Sub Clause 4.4.3 (a)(Resistance of Lining to n-pentane)	-	500	-
Clause 4.4 Sub Clause 4.4.3 (b)(Resistance of Lining to n-pentane)	-	500	-
Clause 4.5 Sub clause 4.5.1(Adhesion)	-	300	-
Clause 4.5 Sub clause 4.5.2(Low Temperature Flexibility)	-	400	-
Clause 4.5 Sub clause 4.5.3(Flexibility of Hose)	-	350	-
Clause 4.5 Sub clause 4.5.4(Ozone Resistance)	-	1000	-
Clause 4.5 Sub clause 4.5.5 4.5.5.1(Proof pressure test)	-	350	-
Clause 4.5 Sub clause 4.5.5 4.5.5.2(Bursting pressure)	-	350	-
Clause 4.5 Sub clause 4.5.6(Grip Strength Test)	-	400	-
Clause 4.5 Sub clause 4.5.7(Burning Behaviour)	-	300	-
Clause 5.2 (a)(Marking Manufacturer’s name or trade-mark, if any )	-	100	-
Clause 5.2 (b)(Marking Words LPG, Max W.P. 1.0 MPa; )	-	100	-
Clause 5.2 (c)(Marking Nominal bore, 1000111)	-	100	-
Clause 5.2 (d)(Marking Batch/Lot No. )	-	100	-
Clause 5.2 (e)(Marking Month and year of manufacture )	-	100	-
Clause 5.2 (f)(Marking IS 9573 (Part 2) )	-	100	-
Clause 5.2 (f)(Marking ecommended to replace before (MONTH/YEAR) )	-	100	-
Clause 5.2.1(BIS Certification Marking )	-	100	-

-
-

630

Samridhi Test House Pvt. Ltd.

8184706

IS 2167 (2025)

Commercial Beverage Coolers - Specification (ISO 22044 : 2021, MOD) (Fourth Revision)

180000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.5.1(Classification According To Temperature)	-	2000	-
Cl.5.2(Construction)	-	2000	-
Cl.6.2.2(Seal Test For Door And Lids)	-	5000	-
Cl.6.2.3(Test On Durability Of Door And Lid)	-	5000	-
Cl.6.2.4(Linear Dimensions, Areas And Volumes)	-	8000	-
Cl.6.3.11.2(Temperature Test)	-	8000	-
Cl.6.3.11.3(Half Load Recovery Test)	-	10000	-
Cl.6.3.11.3.6(Energy Consumption test)	-	11999.99	-
Cl.6.3.12(Water Vapour Condensation Test)	-	10000	-
Cl.6.3.13(Specific Energy Consumption (SEC))	-	2000	-
Cl.6.3.14 and Annex G(Lighting Test)	-	5000	-
Cl.7(Marking)	-	1000	-
Annex B(Net Volume Calculation)	-	3000	-
Annex C(Equivalent Volume Calculation)	-	2999.98	-
Annex D(Tda Calculation)	-	3000	-
Annex E(Tests For Absence Of Odour And Taste)	-	5000	-
5.1(Classification according to temperature)	-	5000	-
5.2(Construction)	-	3000	-
5.2,5.2.1(General)	-	999.99	-
5.2,5.2.2(Materials)	-	1000	-
5.2,5.2.3(Thermal insulation)	-	999.99	-
5.2,5.2.4(Refrigerating system)	-	1000	-
5.2,5.2.5(Electrical components)	-	1000	-
6.1(General)	-	1000	-
6.2.1,Aneex E(Absence of odour and taste (not compulsory))	-	5000	-
6.2.2(Seal test for doors and lids)	-	2500	-
6.2.3(Test on durability of door and lid)	-	2500	-
6.2.4(Linear dimensions, areas and volumes)	-	2499.98	-
6.3.2(Test room condition)	-	1000	-
6.3.3(M-can)	-	1000	-
6.3.4(Preparation of test commercial beverage cooler and general test procedures)	-	2000	-
6.3.5(Loading the commercial beverage cooler)	-	2000	-
6.3.7(Stable conditions)	-	1000	-
6.3.8(Lighting and night-covers)	-	2000	-
6.3.9(Power supply)	-	2000	-
6.3.10(Testing several commercial beverage coolers in the same room)	-	3500	-
6.3.11.2(Temperature test)	-	7000	-
6.3.11.3(Half reload recovery test)	-	10000	-
6.3.11.3.6(Energy consumption test)	-	10000	-
6.3.12(Water vapour condensation test)	-	10000	-
6.3.13(Calculation of specific energy consumption (SEC))	-	10000	-
6.3.14(Lighting test)	-	10000	-
7.2(Marking plate)	-	1000	-
Annex B(Net volume calculation)	-	2999.99	-
Annex C(Equivalent volume calculation)	-	3000	-
Annex D(Total display area (TDA))	-	3000	-
6.3.6(Running in period)	-	1000	-

-
Included w.e.f. 03.06.2026

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number