BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15572 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

10171

Bombay Textiles Research Association (BTRA), Mumbai

7130206

IS 18739 (2024)

Textiles Bedsheets Pillow cover and Blanket Cover Specification

48200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1, Table-1(Fibre content)	-	760	-
3.1, Table-1(Count of Yarn-Warp)	-	510	-
3.1, Table-1(Count of Yarn-Weft)	-	0	COVERED ABOVE
3.1, Table-1(Weave)	-	1010	-
3.1, Table-1(Ends/cm)	-	510	-
3.1, Table-1(Picks/cm)	-	0	COVERED ABOVE
3.1, Table-1(Mass g/m2, Min)	-	510	COVERED ABOVE
3.1, Table-2(Breaking Load on 5 cm × 20 cm Strip (Ravelled Strip Method)-Warpway)	-	1010	-
3.1, Table-2(Breaking Load on 5 cm × 20 cm Strip (Ravelled Strip Method)-Weftway)	-	0	COVERED ABOVE
3.1, Table-2(Tear Strength,-Warpway)	-	1010	-
3.1, Table-2(Tear Strength,-Weftway)	-	0	COVERED ABOVE
3.1, Table-2(Fabric Skew, Percent, Max)	-	1010	-
3.1, Table-2(Fabric Bow, Percent, Max)	-	0	COVERED ABOVE
3.1, Table-2("Dimensional Change, Percent,- Warpway/Weftway")	-	510	-
3.1, Table-2(Scouring Loss Percent, Max)	-	1010	-
3.1, Table-2(pH Value)	-	510	-
3.1, Table-2(Resistance to Pilling, For 1 000 Cycles, Min)	-	910	-
3.1, Table-3 (i)("Light: a) Warp direction b) Weft direction")	-	1510	-
3.1, Table-3 (ii)("Washing: a) Change in colour b) Staining of adjacent fabrics")	-	510	-
3.1, Table-3 (iii)(Bleaching: Hypochlorite)	-	510	-
3.1, Table-3 (iv)("Rubbing: a) Dry b) Wet")	-	260	-
3.1, Table-3 (v)("Perspiration, acidic and alkaline: a) Change in colour b) Staining of adjacent fabrics")	-	510	-
3.2(Fabric Content)	-	760	-
3.4(Sewing Thread)	-	510	-
3.5(Hems)	-	510	-
3.6(Sewing)	-	510	-
3.7, Table-4(- Size)	-	1010	-
3.7, Table-4(Width,cm)	-	0	COVERED ABOVE
3.7, Table-4(Length, cm)	-	0	COVERED
3.1, Table-1(Fibre content)	-	0	COVERED
3.1, Table-1(Count of Yarn-Warp)	-	0	COVERED
3.1, Table-1(Count of Yarn-Weft)	-	0	COVERED ABOVE
3.1, Table-1(Weave)	-	0	COVERED
3.1, Table-1(Ends/cm)	-	0	COVERED
3.1, Table-1(Picks/cm)	-	0	COVERED
3.1, Table-1(Mass g/m2, Min)	-	0	COVERED
3.1, Table-2(Breaking Load on 5 cm × 20 cm Strip (Ravelled Strip Method)-Warpway)	-	0	COVERED
3.1, Table-2(Breaking Load on 5 cm × 20 cm Strip (Ravelled Strip Method)-Weftway)	-	0	COVERED
3.1, Table-2(Tear Strength,-Warpway)	-	0	COVERED
3.1, Table-2(Tear Strength,-Weftway)	-	0	COVERED
3.1, Table-2(Fabric Skew, Percent, Max)	-	0	COVERED
3.1, Table-2(Fabric Bow, Percent, Max)	-	0	COVERED
3.1, Table-2("Dimensional Change, Percent,- Warpway/Weftway")	-	0	COVERED
3.1, Table-2(Scouring Loss Percent, Max)	-	0	COVERED
3.1, Table-2(pH Value)	-	0	COVERED
3.1, Table-2(Resistance to Pilling, For 1 000 Cycles, Min)	-	0	COVERED
3.1, Table-3 (i)("Light: a) Warp direction b) Weft direction")	-	0	COVERED
3.1, Table-3 (ii)("Washing: a) Change in colour b) Staining of adjacent fabrics")	-	0	COVERED
3.1, Table-3 (iii)(Bleaching: Hypochlorite)	-	0	COVERED
3.1, Table-3 (iv)("Rubbing: a) Dry b) Wet")	-	0	COVERED
3.1, Table-3 (v)("Perspiration, acidic and alkaline: a) Change in colour b) Staining of adjacent fabrics")	-	0	COVERED
3.2(Fabric Content)	-	0	COVERED
3.4(Sewing Thread)	-	0	COVERED
3.5(Hems)	-	0	COVERED
3.6(Sewing)	-	0	COVERED
3.7, Table-4(- Size)	-	0	COVERED
3.7, Table-4(Width,cm)	-	0	COVERED
3.7, Table-4(Length, cm)	-	0	COVERED
3.1, Table-1(Fibre content)	-	0	-
3.1, Table-1(Count of Yarn-Warp)	-	0	-
3.1, Table-1(Count of Yarn-Weft)	-	0	-
3.1, Table-1(Weave)	-	0	-
3.1, Table-1(Ends/cm)	-	0	-
3.1, Table-1(Picks/cm)	-	0	-
3.1, Table-1(Mass g/m2, Min)	-	0	-
3.1, Table-2(Breaking Load on 5 cm × 20 cm Strip (Ravelled Strip Method)-Warpway)	-	0	-
3.1, Table-2(Breaking Load on 5 cm × 20 cm Strip (Ravelled Strip Method)-Weftway)	-	0	-
3.1, Table-2(Tear Strength,-Warpway)	-	0	-
3.1, Table-2(Tear Strength,-Weftway)	-	0	-
3.1, Table-2(Fabric Skew, Percent, Max)	-	0	-
3.1, Table-2(Fabric Bow, Percent, Max)	-	0	-
3.1, Table-2("Dimensional Change, Percent,- Warpway/Weftway")	-	0	-
3.1, Table-2(Scouring Loss Percent, Max)	-	0	-
3.1, Table-2(pH Value)	-	0	-
3.1, Table-2(Resistance to Pilling, For 1 000 Cycles, Min)	-	0	-
3.1, Table-3 (i)("Light: a) Warp direction b) Weft direction")	-	0	-
3.1, Table-3 (ii)("Washing: a) Change in colour b) Staining of adjacent fabrics")	-	0	-
3.1, Table-3 (iii)(Bleaching: Hypochlorite)	-	0	-
3.1, Table-3 (iv)("Rubbing: a) Dry b) Wet")	-	0	-
3.1, Table-3 (v)("Perspiration, acidic and alkaline: a) Change in colour b) Staining of adjacent fabrics")	-	0	-
3.2(Fabric Content)	-	0	-
3.4(Sewing Thread)	-	0	-
3.5(Hems)	-	0	-
3.6(Sewing)	-	0	-
3.7, Table-4(- Size)	-	0	-
3.7, Table-4(Width,cm)	-	0	-
3.7, Table-4(Length, cm)	-	0	-
Cl-3.9(Antimicrobial Activity)	-	4800	-
Cl-3.8(Soil Release Efficiency)	-	1010	-
Cl-3.10(Whiteness Index)	-	26520	-

-
Included w.e.f.20.02.2025

10172

Classic Testing & Research Centre (B17), Noida

8180826

IS 555 (1979)

Specification for electric table type fans and regulators (Third Revision)

15000 View breakup
20% concession in testing charges to BIS

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.16(Creepage Distances and Clearances)	-	1000	20% DISCOUNT TO BIS
10.14(Cord Grip Test)	-	1000	20% DISCOUNT TO BIS
10.13, 7.4(Mechanical Endurance Test (for Regulators Only))	-	1000	20% DISCOUNT TO BIS
10.12(Moisture Resistance Test)	-	1000	20% DISCOUNT TO BIS
10.11(Protection against Electric Shock)	-	1000	20% DISCOUNT TO BIS
10.1(Earthing Connection)	-	1000	20% DISCOUNT TO BIS
10.9(Fan Speed and Input)	-	1000	20% DISCOUNT TO BIS
10.8(Construction)	-	1000	20% DISCOUNT TO BIS
10.7(Insulation-Resistance Test (Shall follow Moisture Resistance Test Cl.10.12))	-	1000	20% DISCOUNT TO BIS
10.6(High Voltage Test)	-	1000	20% DISCOUNT TO BIS
10.5(Leakage Current)	-	1000	20% DISCOUNT TO BIS
10.4(Temperature-Rise Test)	-	1000	20% DISCOUNT TO BIS
10.3(Air Delivery Test)	-	1000	20% DISCOUNT TO BIS
9.0(Marking)	-	1000	20% DISCOUNT TO BIS
7.11(Oscillating Mechanism)	-	1000	20% DISCOUNT TO BIS
7.9(Interchangeability)	-	1000	20% DISCOUNT TO BIS
7.8(Speed Regulators)	-	1000	20% DISCOUNT TO BIS
6.0(Design and General Construction)	-	1000	20% DISCOUNT TO BIS
5.0(Rated Frequency)	-	1000	20% DISCOUNT TO BIS
4.0(Rated Voltages)	-	1000	20% DISCOUNT TO BIS
3.0(Size, Speed and Types)	-	1000	20% DISCOUNT TO BIS
7.1(Protection Against Electric Shock)	-	1000	20% DISCOUNT TO BIS
7.2(Electrical Insulation Under Normal Operating Conditions)	-	1000	20% DISCOUNT TO BIS
7.3(Temperature-rise)	-	1000	20% DISCOUNT TO BIS
7.5(Creepage Distances and Clearances)	-	1000	20% DISCOUNT TO BIS
7.6(Finish)	-	1000	20% DISCOUNT TO BIS
7.7(Insulating Materials)	-	1000	20% DISCOUNT TO BIS
7.10(Oscillating Mechanism)	-	1000	20% DISCOUNT TO BIS
8.1, 8.2(Air delivery and service value)	-	1000	20% DISCOUNT TO BIS

15 Oct, 2027

-
-

10173

Classic Testing & Research Centre (B17), Noida

8180826

IS 302 : Part 2 : Sec 21 (2018)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 21 stationary storage type electric water heaters (Second Revision)

25000 View breakup
20% concession in testing charges to BIS

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
31.0(Resistance To Rusting)	-	1000	20% DISCOUNT TO BIS
30.0(Resistance To Heat and Fire)	-	1000	20% DISCOUNT TO BIS
29.0(Creepage Distances and Clearances)	-	1000	20% DISCOUNT TO BIS
28.0(Screws and Connections)	-	1000	20% DISCOUNT TO BIS
27.0(Provision For Earthing)	-	1000	20% DISCOUNT TO BIS
26.0(Terminals for external conductors)	-	1000	20% DISCOUNT TO BIS
25.0(Supply Connection and External Flexible Cords)	-	1000	20% DISCOUNT TO BIS
23.0(Internal Wiring)	-	1000	20% DISCOUNT TO BIS
22.0(Construction)	-	1000	20% DISCOUNT TO BIS
21.0(Mechanical Strength)	-	1000	20% DISCOUNT TO BIS
20.0(Stability and mechanical hazards)	-	1000	20% DISCOUNT TO BIS
19.0(Abnormal Operation)	-	1000	20% DISCOUNT TO BIS
17.0(Overload Protection of transformer and associated circuit)	-	1000	20% DISCOUNT TO BIS
16.0(Leakage current and Electric strength (After Humidity (Environmental) Treatment))	-	1000	20% DISCOUNT TO BIS
15.0(Moisture resistance)	-	1000	20% DISCOUNT TO BIS
14.0(Transient Overvoltage)	-	1000	20% DISCOUNT TO BIS
13.0(Leakage Current and electric strength at operating temperature)	-	1000	20% DISCOUNT TO BIS
11.0(Heating)	-	1000	20% DISCOUNT TO BIS
10.0(Input and Current)	-	1000	20% DISCOUNT TO BIS
8.0(Protection against access to live parts)	-	1000	20% DISCOUNT TO BIS
6.0(Classification)	-	1000	20% DISCOUNT TO BIS
7.0(Marking and Instructions)	-	1000	20% DISCOUNT TO BIS
24(Components)	-	1000	20% DISCOUNT TO BIS
19.11.4.7(Harmonics)	-	1000	20% DISCOUNT TO BIS
19.11.4.6(Class 3 Voltage dips and interruptions)	-	1000	20% DISCOUNT TO BIS
19.11.4.4(Surge immunity test)	-	1000	20% DISCOUNT TO BIS
19.11.4.3(Fast transient bursts)	-	1000	20% DISCOUNT TO BIS
19.11.4.1(Electrostatic discharges)	-	1000	20% DISCOUNT TO BIS
4(GENERAL REQUIREMENTS)	-	1000	20% DISCOUNT TO BIS
5(GENERAL CONDITIONS FOR THE TESTS)	-	1000	20% DISCOUNT TO BIS
32(RADIATION TOXICITY AND SIMILAR HAZARDS)	-	1000	20% DISCOUNT TO BIS
19.11.4.2(Radiated fields)	-	1000	20% DISCOUNT TO BIS
19.11.4.5(Immunity to conducted discharges)	-	1000	20% DISCOUNT TO BIS

15 Oct, 2027

-
Exclusion: 19.11.4.2(Radiated field),19.11.4.5(Immunity to conducted discharges)

10174

Akshat Test Lab & Calibration Services, Ghaziabad

8186526

IS 374 (2019)

Specification for electric ceiling type fans and regulators (Third Revision)

14800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	100	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
8.1(Marking (as per Cl. 7 of IS 302-2-80:2017))	-	500	-
8.1,a(Marking )	-	0	-
8.1,b(Marking )	-	0	-
8.1,c(Marking )	-	0	-
8.1,d(Marking )	-	0	-
8.1,e(Marking )	-	0	-
8.1,f(Marking )	-	0	-
8.1,g(Marking )	-	0	-
8.2(Marking )	-	0	-
8.3,a(Marking )	-	0	-
8.3,b(Marking )	-	0	-
8.3,c(Marking )	-	0	-
8.3,d(Marking )	-	0	-
8.3,e(Marking )	-	0	-
8.4(Marking )	-	0	-
8(Marking (as per Cl. 7.1 of IS 302-2-80:2017))	-	0	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1 (f) of IS 302-1:2008))	-	0	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008))	-	0	-
8(Marking (as per Cl.7.12.1(a) of IS 302-2-80:2017))	-	0	-
6.2(Rating)	-	0	-
9(Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-	200	-
9(Power Input & current (as per Cl.10 of IS 302-2-80 :2017))	-	500	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	1000	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	250	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	0	-
9(Transient over Voltage (as per Cl.14 of IS 302-2-80 :2017))	-	500	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	1000	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	0	-
9(Overload protection of transformers and associated circuits (as per Cl.17 of IS 302-2-80 :2017))	-	250	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	1000	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	0	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	0	-
9(Staibilty and mechanical hazards (as per Cl.20.102, Table 101 of IS 302-2-80 :2017))	-	350	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	500	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	0	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Construction (as per Cl.22.101 of IS 302-2-80 :2017))	-	350	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	350	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	0	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	0	-
9(Components (as per Cl.24.103 of IS 302-2-80 :2017))	-	100	-
9(Components (as per Cl.24.104 of IS 302-2-80 :2017))	-	0	-
9(Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017))	-	250	-
9(Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017))	-	500	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	500	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Screw and connections (as per Cl.28 of IS 302-2-80 :2017))	-	250	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	250	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	0	-
9(Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-	500	-
9(Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017))	-	500	-
9(Radiation, Toxicity and similar Hazards (Cl.32 of IS 302-2-80 :2017))	-	250	-
10.1(Speed Regulators)	-	250	-
10.2(Speed Regulators)	-	0	-
10.2(Speed Regulators)	-	0	-
10.2(Speed Regulators)	-	0	-
10.3(Speed Regulators)	-	0	-
10.4(Speed Regulators)	-	0	-
10.5(Speed Regulators)	-	0	-
10.6(Speed Regulators)	-	0	-
10.7(Speed Regulators)	-	0	-
10.7(Speed Regulators)	-	0	-
10.8(Speed Regulators)	-	0	-
11.1(Starting)	-	250	-
11.2(Starting)	-	0	-
12(Interchangeability)	-	250	-
13(Silent Operation)	-	250	-
14.3 & Table 1(Test for Air Performance)	-	1000	-
14.3 & Table 1(Test for Air Performance)	-	0	-
14.4(Measurement of Speed of the Fan )	-	250	-
14.4(Measurement of Speed of the Fan )	-	0	-
14.5(Measurement of Power factor and Power Input)	-	0	-
14.5(Measurement of Power factor and Power Input)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	1000	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
17(Test for Harmonic Distortion)	-	1000	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
8.1(Marking (as per Cl. 7 of IS 302-2-80:2017))	-	0	-
8.1,a(Marking )	-	0	-
8.1,b(Marking )	-	0	-
8.1,c(Marking )	-	0	-
8.1,d(Marking )	-	0	-
8.1,e(Marking )	-	0	-
8.1,f(Marking )	-	0	-
8.1,g(Marking )	-	0	-
8.2(Marking )	-	0	-
8.3(Marking )	-	0	-
8.3,a(Marking )	-	0	-
8.3,b(Marking )	-	0	-
8.3,c(Marking )	-	0	-
8.3,d(Marking )	-	0	-
8.3,e(Marking )	-	0	-
8.4(Marking )	-	0	-
8(Marking (as per Cl. 7.1 of IS 302-2-80:2017))	-	0	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1 (f) of IS 302-1:2008))	-	0	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008))	-	0	-
8(Marking (as per Cl.7.12.1(a) of IS 302-2-80:2017))	-	0	-
6.2(Rating)	-	0	-
9(Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-	100	-
9(Power Input & current (as per Cl.10 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	0	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	0	-
9(Transient over Voltage (as per Cl.14 of IS 302-2-80 :2017))	-	0	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	0	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	0	-
9(Overload protection of transformers and associated circuits (as per Cl.17 of IS 302-2-80 :2017))	-	0	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	0	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	0	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	0	-
9(Staibilty and mechanical hazards (as per Cl.20.102, Table 101 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-1:2008))	-	0	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-1:2008))	-	0	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Construction (as per Cl.22.101 of IS 302-2-80 :2017))	-	100	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	0	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	0	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	0	-
9(Components (as per Cl.24.103 of IS 302-2-80 :2017))	-	0	-
9(Components (as per Cl.24.104 of IS 302-2-80 :2017))	-	0	-
9(Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017))	-	0	-
9(Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Screw and connections (as per Cl.28 of IS 302-2-80 :2017))	-	0	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	0	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	0	-
9(Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-	0	-
9(Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017))	-	0	-
9(Radiation, Toxicity and similar Hazards (Cl.32 of IS 302-2-80 :2017))	-	0	-
10.1(Speed Regulators)	-	0	-
10.2(Speed Regulators)	-	0	-
10.2(Speed Regulators)	-	0	-
10.2(Speed Regulators)	-	0	-
10.3(Speed Regulators)	-	0	-
10.4(Speed Regulators)	-	0	-
10.5(Speed Regulators)	-	0	-
10.6(Speed Regulators)	-	0	-
10.7(Speed Regulators)	-	0	-
10.7(Speed Regulators)	-	0	-
10.8(Speed Regulators)	-	0	-
11.1(Starting)	-	0	-
11.2(Starting)	-	0	-
12(Interchangeability)	-	0	-
13(Silent Operation)	-	0	-
14.3 & Table 1(Test for Air Performance)	-	0	-
14.3 & Table 1(Test for Air Performance)	-	0	-
14.4(Measurement of Speed of the Fan )	-	0	-
14.4(Measurement of Speed of the Fan )	-	0	-
14.5(Measurement of Power factor and Power Input)	-	0	-
14.5(Measurement of Power factor and Power Input)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
17(Test for Harmonic Distortion)	-	0	-
4(GENERAL REQUIREMENTS)	-	0	-
5(GENERAL NOTES ON TESTS)	-	0	-
15.1, 15.2(Air delivery and service value)	-	0	-
Cl-9 (Cl-19.11.4.1 of IS 302-1)(Electrostatic discharge)	-	0	-
Cl-9 (Cl-19.11.4.2 of IS 302-1)(Radiated Fields)	-	0	-
Cl-9 (Cl-19.11.4.3 of IS 302-1)(Fast transient bursts)	-	0	-
Cl-9 (Cl-19.11.4.4 of IS 302-1)(Surge Immunity test)	-	0	-
Cl-9 (Cl-19.11.4.5 of IS 302-1)(Immunity to conducted discharge)	-	0	-
Cl-9 (Cl-19.11.4.6 of IS 302-1)(Voltage dips and interruptions)	-	0	-
Cl-9 (Cl-19.11.4.7 of IS 302-1)(Harmonics)	-	0	-
Cl-9 (Cl-19.101 of IS 302-1)(Abnormal Operation)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
(Cl. 17 of IS 302-2-80 :2017)(Overload protection of transformers and associated circuits)	-	0	-
(Cl.4.4 of IS 374: 2019)(Bearings)	-	0	-
(Cl. 4.5 of IS 374: 2019)(Brushless DC Motor)	-	0	-
(Cl.4.6 of IS 374: 2019)(Enclosure)	-	0	-
(Cl. 7.6 of IS 302 Part 1)(Marking and Instructions)	-	0	-
Cl. 7.8 of IS 302-2-80 :2017(MARKING AND INSTRUCTIONS)	-	0	-
(Cl. 7.12 of IS 302-2-80 :2017)(Marking and Instructions)	-	0	-
(Cl. 7.12.1 of IS 302-2-80 :2017)(Marking and Instructions)	-	0	-
(Cl. 7.12.5 of IS 302-1: 2008)(Marking and Instructions)	-	0	-
(Cl. 7.12.5 of IS 302-1: 2008)(Marking and Instructions)	-	0	-
(Cl. 7.12.5 of IS 302-1: 2008)(Marking and Instructions)	-	0	-
(Cl. 7.12.7 of IS 302-1: 2008(Marking and Instructions)	-	0	-
(Cl. 7.13 of IS 302-1: 2008)(Marking and Instructions)	-	0	-
(Cl. 7.14 of IS 302-1: 2008)(Marking and Instructions)	-	0	-
(Cl. 10.1 of IS 374: 2019)(SPEED REGULATORS)	-	0	-
(Cl. 10.3 of IS 374: 2019)(SPEED REGULATORS)	-	0	-
(Cl. 10.4 of IS 374: 2019)(SPEED REGULATORS)	-	0	-
(Cl. 10.7 of IS 374: 2019)(SPEED REGULATORS)	-	0	-
(Cl. 10.7 of IS 374: 2019)(SPEED REGULATORS)	-	0	-
(Cl. 10.8 of IS 374: 2019)(SPEED REGULATORS)	-	0	-
(Cl. 11.2 of IS 374: 2019)(STARTING)	-	0	-
(Cl. 13 of IS 374: 2019)(SILENT OPERATION)	-	0	-
(Cl. 15.1 of IS 374: 2019)(PERFORMANCE REQUIREMENTS)	-	0	-
(Cl. 15.1 of IS 374: 2019)(PERFORMANCE REQUIREMENTS)	-	0	-
(Cl. 17 of IS 374: 2019(Test for Harmonic Distortion)	-	0	-
(Cl. 8.2 of IS 302-1: 2008)(PROTECTION AGAINST ACCESS TO LIVE PARTS)	-	0	-
(Cl. 11 of IS 302-1: 2008)(HEATING)	-	0	-
(Cl. 15 of IS 302-1: 2008)(MOISTURE RESISTANCE)	-	0	-
(Cl. 15 of IS 302-1: 2008)(MOISTURE RESISTANCE)	-	0	-
(Cl. 15 of IS 302-1: 2008.(MOISTURE RESISTANCE)	-	0	-
(Cl. 17 of IS 302-1: 2008)(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	0	-
(Cl. 17 of IS 302-1: 2008)(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	0	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	0	-
(Cl. 19.7 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	0	-
(Cl. 19 of IS 302-2-80 :2017)(ABNORMAL OPERATION)	-	0	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	0	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	0	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	0	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	0	-
(Cl. 20.102 of IS 302-2-80 :2017)(STABILITY AND MECHANICAL HAZARDS)	-	0	-
(Cl. 22.2 of IS 302-1: 2008)(CONSTRUCTION)	-	0	-
(Cl. 22.14 of IS 302-1: 2008)(CONSTRUCTION)	-	0	-
(Cl. 22.18 of IS 302-1: 2008)(Electric Ceiling type fan-Specification)	-	0	-
(Cl. 22.21 of IS 302-1: 2008)(CONSTRUCTION)	-	0	-
(Cl. 22.22 of IS 302-1: 2008)(CONSTRUCTION)	-	0	-
(Cl. 22.41 of IS 302-1: 2008)(CONSTRUCTION)	-	0	-
(Cl. 22.44 of IS 302-1: 2008)(CONSTRUCTION)	-	0	-
(Cl. 22.101 of IS 302-2-80: 2017)(CONSTRUCTION)	-	0	-
(Cl. 23.1 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 23.2 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 23.4 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 23.5 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 23.6 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 23.7 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 23.9 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 23.10 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 24.1 of IS 302-1: 2008)(COMPONENTS)	-	0	-
(Cl. 24.5 of IS 302-1: 2008)(COMPONENTS)	-	0	-
(Cl. 24.105 of IS IS 302-2-80 :2017)(COMPONENTS)	-	0	-
(Cl. 26.1 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	0	-
(Cl. 26.8 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	0	-
(Cl. 26.9 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	0	-
(Cl. 26.10 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	0	-
(Cl. 27.1 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	0	-
(Cl. 27.2 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	0	-
(Cl. 27.4 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	0	-
(Cl. 27.5 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	0	-
(Cl. 28.4 of IS 302-1: 2008)(SCREWS AND CONNECTIONS)	-	0	-
(Cl. 30.2 of IS 302-1: 2008)(RESISTANCE TO HEAT AND FIRE)	-	0	-
(Cl. 30.2 of IS 302-1: 2008)(RESISTANCE TO HEAT AND FIRE)	-	0	-
(Cl. 32 of IS 302-1: 2008)(Radiation, toxicity and similar hazards)	-	0	For BIS only = 14800/- (for safety standard testing charges separate) For others = 30000/-

19 Jun, 2028

-
-

10175

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 13801 (2013)

Chequered Cement Concrete Tiles -

200,250,300,400 MM

7300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
(Cl 7, 8 &9)(Length, Breadth, Thickness, Difference in length of side between the longest side and shorterst side in the sample shall not exceed 1 mm, Half tiles, Difference in Thickness between the thickest and thinnest tile in the sample shall not exceed 10 percent of minimum thickness, Depth of chequred groove, Thickness of wearing layer.)	-	500	-
Cl 12.1(Concavity & Convexity )	-	200	-
Cl 12.2(Longest gap between the arms of the square and the edge of the title shall not exceed 2 percent of the length.)	-	200	-
Cl 12.3(Shall not exceed 1 percent of the length of the edge.)	-	200	-
Cl 12.4(Water absorption)	-	500	-
Cl 12.5(Wet transverse strength)	-	1500	-
Cl 12.6(Resistance to wear)	-	2500	-
Cl 11(Finish)	-	100	-
Annex G3.1(Aluminium oxide content)	-	1500	-
(Cl 7, 8 &9)(Length, Breadth, Thickness, Difference in length of side between the longest side and shorterst side in the sample shall not exceed 1 mm, Half tiles, Difference in Thickness between the thickest and thinnest tile in the sample shall not exceed 10 percent of minimum thickness, Depth of chequred groove, Thickness of wearing layer.)	-	500	-
Cl 12.1(Concavity & Convexity )	-	200	-
Cl 12.2(Longest gap between the arms of the square and the edge of the title shall not exceed 2 percent of the length.)	-	200	-
Cl 12.3(Shall not exceed 1 percent of the length of the edge.)	-	200	-
Cl 12.4(Water absorption)	-	500	-
Cl 12.5(Wet transverse strength)	-	1500	-
Cl 12.6(Resistance to wear)	-	2500	-
Cl 11(Finish)	-	100	-
(Cl 7, 8 &9)(Length, Breadth, Thickness, Difference in length of side between the longest side and shorterst side in the sample shall not exceed 1 mm, Half tiles, Difference in Thickness between the thickest and thinnest tile in the sample shall not exceed 10 percent of minimum thickness, Depth of chequred groove, Thickness of wearing layer.)	-	200	-
Cl 12.1(Concavity & Convexity )	-	200	-
Cl 12.2(Longest gap between the arms of the square and the edge of the title shall not exceed 2 percent of the length.)	-	200	-
Cl 12.3(Shall not exceed 1 percent of the length of the edge.)	-	200	-
Cl 12.4(Water absorption)	-	500	-
Cl 12.5(Wet transverse strength)	-	1500	-
Cl 12.6(Resistance to wear)	-	2500	-
Cl 11(Finish)	-	100	-
Cl 11(Finish)	-	100	-
Cl 12.6(Resistance to wear)	-	2500	-
Cl 12.5(Wet transverse strength)	-	1500	-
Cl 12.4(Water absorption)	-	500	-
Cl 12.3(Shall not exceed 1 percent of the length of the edge.)	-	200	-
Cl 12.2(Longest gap between the arms of the square and the edge of the title shall not exceed 2 percent of the length.)	-	200	-
Cl 12.1(Concavity & Convexity )	-	200	-
(Cl 7, 8 &9)(Length, Breadth, Thickness, Difference in length of side between the longest side and shorterst side in the sample shall not exceed 1 mm, Half tiles, Difference in Thickness between the thickest and thinnest tile in the sample shall not exceed 10 percent of minimum thickness, Depth of chequred groove, Thickness of wearing layer.)	-	500	-
8.3(Thickness of wearing layer)	-	100	-

31 Dec, 2029

-
Included w.e.f. 25.07.2024

10176

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 18513 (2023)

Hot-Dip Zinc- Aluminium-Magnesium Alloy Coated Steel Sheets Plates and Strips - Specification

Hot-Dip Zinc- Aluminium-Magnesium Alloy Coated Steel Sh

24500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 5.4(Surface Finish)	-	2500	-
Clause. 7.0(Material)	-	6000	-
Clause. 8.0(Coating Adherence)	-	2000	-
Clause. 8.0(Coating Mass)	-	3000	-
Clause. 10.0(Tensile Test)	-	1500	-
Clause. 10.0(Yield Stress or Proof stress)	-	1500	-
Clause. 10.0(Elongation)	-	1000	-
Clause. 10.0(Plastic strain Ratio)	-	1000	-
Clause. 10.0(Tensile Strain Hardening Component)	-	1500	-
Clause. 10.0(Bake Hardening Index)	-	1000	-
Clause. 10.0(Hardness Test)	-	1000	-
Clause. 10.0(Bend Test)	-	1000	-
Clause.11.0(Dimensions, Shape & Tolerances)	-	1500	-
Clause. 5.4(Surface Finish)	-	2500	-
Clause. 7.0(Material)	-	6000	-
Clause. 8.0(Coating Adherence)	-	2000	-
Clause. 8.0(Coating Mass)	-	3000	-
Clause. 10.0(Tensile Test)	-	1500	-
Clause. 10.0(Yield Stress or Proof stress)	-	1500	-
Clause. 10.0(Elongation)	-	1000	-
Clause. 10.0(Plastic strain Ratio)	-	1000	-
Clause. 10.0(Tensile Strain Hardening Component)	-	1500	-
Clause. 10.0(Bake Hardening Index)	-	1000	-
Clause. 10.0(Hardness Test)	-	1000	-
Clause. 10.0(Bend Test)	-	1000	-
Clause.11.0(Dimensions, Shape & Tolerances)	-	1500	-
7(C)	-	300	-
7(Mn)	-	300	-
7(P)	-	300	-
7(S)	-	300	-
7(Si)	-	300	-
7(N)	-	2100	-
7(Cr)	-	300	-
7(Mo)	-	300	-
7(Ni)	-	300	-
7(Al)	-	300	-
7(B)	-	300	-
7(Ti)	-	300	-
7(V)	-	300	-
7(Nb)	-	300	-

31 Dec, 2029

-
Included w.e.f. 25.07.2024

10177

Classic Testing & Research Centre (B17), Noida

8180826

IS 2082 (2018)

Stationary storage type electric water heaters - Specification (Fifth Revision)

25000 View breakup
20% concession in testing charges to BIS

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	1000	20% DISCOUNT TO BIS
7(Marking)	-	1000	20% DISCOUNT TO BIS
7(Marking)	-	1000	20% DISCOUNT TO BIS
7(Marking)	-	1000	20% DISCOUNT TO BIS
7(Marking)	-	1000	20% DISCOUNT TO BIS
7(Marking)	-	1000	20% DISCOUNT TO BIS
7(Marking)	-	1000	20% DISCOUNT TO BIS
7(Marking)	-	1000	20% DISCOUNT TO BIS
7(Marking)	-	1000	20% DISCOUNT TO BIS
7(Marking)	-	1000	20% DISCOUNT TO BIS
7(Marking)	-	1000	20% DISCOUNT TO BIS
7(Marking)	-	1000	20% DISCOUNT TO BIS
7(Marking)	-	1000	20% DISCOUNT TO BIS
7(Marking)	-	1000	20% DISCOUNT TO BIS
7(Marking)	-	1000	20% DISCOUNT TO BIS
7(Marking)	-	1000	20% DISCOUNT TO BIS
7(Marking)	-	1000	20% DISCOUNT TO BIS
7(Marking)	-	1000	20% DISCOUNT TO BIS
7(Marking)	-	1000	20% DISCOUNT TO BIS
7(Marking)	-	1000	20% DISCOUNT TO BIS
7(Marking)	-	1000	20% DISCOUNT TO BIS
7(Marking)	-	1000	20% DISCOUNT TO BIS
7(Marking)	-	1000	20% DISCOUNT TO BIS
7(Marking)	-	1000	20% DISCOUNT TO BIS
7(Marking)	-	1000	20% DISCOUNT TO BIS
7(Marking)	-	1000	20% DISCOUNT TO BIS
7(Marking)	-	1000	20% DISCOUNT TO BIS
7(Marking)	-	1000	20% DISCOUNT TO BIS
6(Classification )	-	1000	20% DISCOUNT TO BIS
6(Classification )	-	1000	20% DISCOUNT TO BIS
(Cl.8 of IS 302-2-21:2011)(Protection Against Access to Live Parts)	-	1000	20% DISCOUNT TO BIS
(Cl.10 of IS 302-2-21: 2011)(Power Input & Current)	-	1000	20% DISCOUNT TO BIS
(Cl.11 of 302-2-21:2011)(Heating)	-	1000	20% DISCOUNT TO BIS
(Cl.11 of 302-2-21:2011)(Heating)	-	1000	20% DISCOUNT TO BIS
(Cl.11 of 302-2-21:2011)(Heating)	-	1000	20% DISCOUNT TO BIS
(Cl.13 of IS 302-2-21:2011)(Leakage Current )	-	1000	20% DISCOUNT TO BIS
(Cl.13 of IS 302-2-21:2011)(Electrical Strength at Operating Temperature)	-	1000	20% DISCOUNT TO BIS
(Cl.14ofIS302-2-21:2011)(Transient Over Voltages)	-	1000	20% DISCOUNT TO BIS
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	1000	20% DISCOUNT TO BIS
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	1000	20% DISCOUNT TO BIS
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	1000	20% DISCOUNT TO BIS
(Cl.17 of IS 302-2-21:2011)(Overload protection of transformers & associated circuits)	-	1000	20% DISCOUNT TO BIS
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	1000	20% DISCOUNT TO BIS
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	1000	20% DISCOUNT TO BIS
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	1000	20% DISCOUNT TO BIS
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	1000	20% DISCOUNT TO BIS
(Cl.20 of IS 302-2-21:2011)(Stability & Mechanical Hazards)	-	1000	20% DISCOUNT TO BIS
(Cl.21ofIS302-2-21:2011)(Mechanical strength)	-	1000	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	20% DISCOUNT TO BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	20% DISCOUNT TO BIS
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	20% DISCOUNT TO BIS
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	20% DISCOUNT TO BIS
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	20% DISCOUNT TO BIS
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	20% DISCOUNT TO BIS
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	20% DISCOUNT TO BIS
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	20% DISCOUNT TO BIS
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	20% DISCOUNT TO BIS
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	20% DISCOUNT TO BIS
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	20% DISCOUNT TO BIS
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	20% DISCOUNT TO BIS
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	20% DISCOUNT TO BIS
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	20% DISCOUNT TO BIS
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	20% DISCOUNT TO BIS
(Cl.24ofIS302-221:2011)(Component)	-	500	20% DISCOUNT TO BIS
(Cl.24ofIS302-221:2011)(Component)	-	500	20% DISCOUNT TO BIS
(Cl.24ofIS302-221:2011)(Component)	-	500	20% DISCOUNT TO BIS
(Cl.24ofIS302-221:2011)(Component)	-	500	20% DISCOUNT TO BIS
(Cl.24ofIS302-221:2011)(Component)	-	500	20% DISCOUNT TO BIS
(Cl.24ofIS302-221:2011)(Component)	-	500	20% DISCOUNT TO BIS
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	20% DISCOUNT TO BIS
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	20% DISCOUNT TO BIS
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	20% DISCOUNT TO BIS
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	20% DISCOUNT TO BIS
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	20% DISCOUNT TO BIS
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	20% DISCOUNT TO BIS
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	20% DISCOUNT TO BIS
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	20% DISCOUNT TO BIS
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	20% DISCOUNT TO BIS
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	20% DISCOUNT TO BIS
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	20% DISCOUNT TO BIS
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	20% DISCOUNT TO BIS
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	20% DISCOUNT TO BIS
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	20% DISCOUNT TO BIS
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	20% DISCOUNT TO BIS
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	20% DISCOUNT TO BIS
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	20% DISCOUNT TO BIS
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	20% DISCOUNT TO BIS
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	20% DISCOUNT TO BIS
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	20% DISCOUNT TO BIS
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	20% DISCOUNT TO BIS
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	20% DISCOUNT TO BIS
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	20% DISCOUNT TO BIS
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	20% DISCOUNT TO BIS
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	20% DISCOUNT TO BIS
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	20% DISCOUNT TO BIS
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	20% DISCOUNT TO BIS
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	20% DISCOUNT TO BIS
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	20% DISCOUNT TO BIS
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	20% DISCOUNT TO BIS
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	20% DISCOUNT TO BIS
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	20% DISCOUNT TO BIS
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	20% DISCOUNT TO BIS
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	500	20% DISCOUNT TO BIS
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	500	20% DISCOUNT TO BIS
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	500	20% DISCOUNT TO BIS
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	500	20% DISCOUNT TO BIS
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	500	20% DISCOUNT TO BIS
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	500	20% DISCOUNT TO BIS
(Cl.28 of IS 302-2-21:2011)(Screws & Connections)	-	500	20% DISCOUNT TO BIS
(Cl.29ofIS302-2-21:2011)(Clearances, Creepage Distances and Solid Insulation)	-	500	20% DISCOUNT TO BIS
(Cl.30 of IS 302-2-21:2011)(Resistance to Heat & Fire)	-	500	20% DISCOUNT TO BIS
(Cl.30 of IS 302-2-21:2011)(Resistance to Heat & Fire)	-	500	20% DISCOUNT TO BIS
(Cl.31 of IS 302-2-21:2011)(Resistance to Rusting)	-	500	20% DISCOUNT TO BIS
(Cl.15 of IS 2082:2018)(Verification of the Rated Capacity)	-	500	20% DISCOUNT TO BIS
(Cl.16 of IS 2082:2018)(Standing Loss per 24 Hours)	-	500	20% DISCOUNT TO BIS
(Cl.17 of IS 2082:2018)(Hot Water Output)	-	500	20% DISCOUNT TO BIS
(Cl.18 of IS 2082:2018)( Reheating Time)	-	500	20% DISCOUNT TO BIS
(Cl.19 of IS 2082:2018)(Mixing Factor)	-	500	20% DISCOUNT TO BIS
(Cl.20 of IS 2082:2018)(Deviation of Dial Calibration)	-	500	20% DISCOUNT TO BIS
(Cl.21 of IS 2082:2018)(Cyclic Temperature Variation)	-	500	20% DISCOUNT TO BIS
(Cl.22 of IS 2082:2018)(Finish)	-	500	20% DISCOUNT TO BIS
Cl.22 of IS 2082:2018(Finish)	-	500	20% DISCOUNT TO BIS
Cl.21 of IS 2082:2018(Cyclic Temperature Variation)	-	500	20% DISCOUNT TO BIS
Cl.20 of IS 2082:2018(Deviation of Dial Calibration)	-	500	20% DISCOUNT TO BIS
Cl.19 of IS 2082:2018(Mixing Factor)	-	500	20% DISCOUNT TO BIS
Cl.18 of IS 2082:2018( Reheating Time)	-	500	20% DISCOUNT TO BIS
Cl.17 of IS 2082:2018(Hot Water Output)	-	500	20% DISCOUNT TO BIS
Cl.16 of IS 2082:2018(Standing Loss per 24 Hours)	-	500	20% DISCOUNT TO BIS
Cl.15 of IS 2082:2018(Verification of the Rated Capacity)	-	500	20% DISCOUNT TO BIS
Cl.31 of IS 302-2-21:2018(Resistance to Rusting)	-	500	20% DISCOUNT TO BIS
Cl.30.2 of IS 302-1:2008(Resistance to Heat & Fire : Glow wire test )	-	500	20% DISCOUNT TO BIS
Cl.30.1 of IS 302-1:2008(Resistance to Heat & Fire : Ball pressure test )	-	500	20% DISCOUNT TO BIS
Cl.29.2 of IS 302-1:2008(Clearances, Creepage Distances and Solid Insulation : Creepage distance )	-	500	20% DISCOUNT TO BIS
Cl.29.1 of IS 302-1:2008(Clearances, Creepage Distances and Solid Insulation : Clearance distance )	-	500	20% DISCOUNT TO BIS
Cl.28 of IS 302-2-21:2018(Screws & Connections)	-	500	20% DISCOUNT TO BIS
Cl.27.5 of IS 302-1:2008(Provision for Earthing : ECR )	-	500	20% DISCOUNT TO BIS
Cl.27 of IS 302-2-21:2018(Provision for Earthing)	-	500	20% DISCOUNT TO BIS
Cl.26 of IS 302-2-21: 2018(Terminals for External Conductors)	-	500	20% DISCOUNT TO BIS
Cl.25.18 of IS 302-1:2008(Supply Connection & External Flexible Cords)	-	500	20% DISCOUNT TO BIS
Cl.25.15 of IS 302-1:2008(Supply Connection & External Flexible Cords : Cord grip test - displacement )	-	500	20% DISCOUNT TO BIS
Cl.25.15 of IS 302-1:2008(Supply Connection & External Flexible Cords : Cord grip test )	-	500	20% DISCOUNT TO BIS
Cl.25.12 of IS 302-1:2008(Supply Connection & External Flexible Cords : Moulding of supply cord )	-	500	20% DISCOUNT TO BIS
Cl.25.10 of IS 302-1:2008(Supply Connection & External Flexible Cords : Colour of Earthing conductor )	-	500	20% DISCOUNT TO BIS
Cl.25.8 of IS 302-2-21:2018(Supply Connection & External Flexible Cords : Resistance of supply cord )	-	500	20% DISCOUNT TO BIS
Cl.25.5 of IS 302-1:2008(Supply Connection & External Flexible Cords : Type of attachment )	-	500	20% DISCOUNT TO BIS
Cl.25 of IS 302-2-21:2018(Supply Connection & External Flexible Cords : connection to the supply mains)	-	500	20% DISCOUNT TO BIS
Cl.24.102 of IS 302-221:2018(Component : Operation of thermal cut-out )	-	500	20% DISCOUNT TO BIS
Cl.24.101 of IS302-221:2018(Component : Location of non self reseting thermal cut out )	-	500	20% DISCOUNT TO BIS
Cl.24of IS 302-221:2018(Component : Relevent Indian standards )	-	500	20% DISCOUNT TO BIS
Cl. 23 of IS 302-1:2008(Internal Wiring : color identification for earthing conductor )	-	500	20% DISCOUNT TO BIS
Cl. 23 of IS 302-1:2008(Internal Wiring )	-	500	20% DISCOUNT TO BIS
Cl.22.111 of IS 302-2-21:2018(Construction : Resistance to vacuum )	-	500	20% DISCOUNT TO BIS
Cl.22.110 of IS 302-2-21:2018(Construction : meterial of connections )	-	500	20% DISCOUNT TO BIS
Cl.22.110 of IS 302-2-21:2018(Construction : Material of Inner conatiner )	-	500	20% DISCOUNT TO BIS
Cl.22.109 of IS 302-2-21:2018(Construction : Drain for appliance having a capacity of more than 15 liter)	-	500	20% DISCOUNT TO BIS
Cl.22.108 of IS 302-2-21:2018(Construction : fixing to wall )	-	500	20% DISCOUNT TO BIS
Cl.22.107 of IS 302-2-21:2018(Construction : Position of Heating elements and thermal control sensor)	-	500	20% DISCOUNT TO BIS
Cl.22.106 of IS 302-2-21:2018(Construction : Operation of thermal cut- out )	-	500	20% DISCOUNT TO BIS
Cl.22.104 of IS 302-2-21:2018(Construction : Outlet of open outlet heater )	-	500	20% DISCOUNT TO BIS
Cl.22.103 of IS 302-2-21:2018(Construction : Operation of Pressure relieve devices )	-	500	20% DISCOUNT TO BIS
Cl.22.102 of IS 302-2-21:2018(Construction : repeated drawing of water temp )	-	500	20% DISCOUNT TO BIS
Cl.22.101 of IS 302-2-21:2018(Construction : rated pressure of closed water heater )	-	500	20% DISCOUNT TO BIS
Cl.22.47 of IS 302-2-21:2018 (Construction : Water pressure test )	-	500	20% DISCOUNT TO BIS
Cl.22.44 of IS 302-1:2008(Construction : Shape and decoration of enclosure)	-	500	20% DISCOUNT TO BIS
Cl.22.34, Cl 22.35 of IS 302-1:2008(Construction : Shaft of operating Knobs )	-	500	20% DISCOUNT TO BIS
Cl.22.33 of IS 302-1:2008(Construction : Direct contact of liquids )	-	500	20% DISCOUNT TO BIS
Cl 22.26 ,Cl.22.28, Cl 22.29, Cl 22.30 , Cl 22.31, Cl 22.32 of IS 302-1:2008(Construction : Supplymentry/ double / reinforced insulation for Class II/ Class III appliance )	-	500	20% DISCOUNT TO BIS
Cl.22.18 Of IS 302-1:2008(Construction : Resistance to corrosion )	-	500	20% DISCOUNT TO BIS
Cl.22.17 of IS 302-1:2008(Construction : Spacers )	-	500	20% DISCOUNT TO BIS
Cl.22.14 of IS 302-1:2008(Construction : ragged or sharp edges)	-	500	20% DISCOUNT TO BIS
Cl.22.12 of IS 302-1:2008(Construction : Fixing of Handle, knob, grips, levers and similar parts)	-	500	20% DISCOUNT TO BIS
Cl.22.11 of IS 302-1:2008(Construction : Fixing of non detachable part )	-	500	20% DISCOUNT TO BIS
Cl.22.7 of IS 302-1:2008(Construction: adequate safeguards against the risk of excessive pressure)	-	500	20% DISCOUNT TO BIS
Cl.22.6 of IS 302-2-21:2018(Construction : Size of drain hole )	-	500	20% DISCOUNT TO BIS
Cl.22.6 of IS 302-1:2008(Construction : Effect of water on 3 insulation )	-	500	20% DISCOUNT TO BIS
Cl.22.2 of IS 302-1:2008(Construction : Provision to ensure all pole disconnection )	-	500	20% DISCOUNT TO BIS
Cl.22.1 of IS 302-1:2008(Construction : IP test )	-	500	20% DISCOUNT TO BIS
Cl.21.2 of IS 302-1:2008(Mechanical strength : prevent penetration by sharp implements. )	-	500	20% DISCOUNT TO BIS
Cl.21.1 of IS 302-1:2008(Mechanical strength : Rough handling in normal use)	-	500	20% DISCOUNT TO BIS
Cl.20 of IS 302-1:2008(Stability & Mechanical Hazards)	-	500	20% DISCOUNT TO BIS
Cl.19 of IS 302-2-21:2018(Abnormal Operation : leakage from container during test)	-	500	20% DISCOUNT TO BIS
Cl.19 of IS 302-2-21:2018(Abnormal Operation : High Voltage )	-	500	20% DISCOUNT TO BIS
Cl.19 of IS 302-2-21:2018(Abnormal Operation : Insulation of the supply cable or cord)	-	500	20% DISCOUNT TO BIS
Cl.19 of IS 302-2-21:2018(Abnormal Operation : Wall ceiling temp. of test corner )	-	500	20% DISCOUNT TO BIS
Cl.19 of IS 302-2-21:2018(Abnormal Operation : emission of flame or molten metal or poisonous or ignitable gas )	-	500	20% DISCOUNT TO BIS
Cl.16 of IS 302-2-21-2018(Leakage current and Electric strength (After humidity): Electric Strentgh )	-	500	20% DISCOUNT TO BIS
Cl.16 of IS 302-2-21-2018(Leakage current and Electric strength (After humidity): Leakage current )	-	500	20% DISCOUNT TO BIS
Cl.15 of IS 302-2-21-2018(Moisture Resistance)	-	500	20% DISCOUNT TO BIS
Cl.14 of IS 302-2-21:2018(Transient Over Voltages)	-	500	20% DISCOUNT TO BIS
Cl.13 of IS 302-2-21:2018(3 Strength at Operating Temperature)	-	500	20% DISCOUNT TO BIS
Cl.13 of IS 302-2-21:2018(Leakage Current )	-	500	20% DISCOUNT TO BIS
Cl.11 of 302-2-21:2018(Heating : Room Temp.)	-	500	20% DISCOUNT TO BIS
Cl.11 of 302-2-21:2018(Heating : Temp of Rubber or PVC insulation of internal and external wiring)	-	500	20% DISCOUNT TO BIS
Cl.11 of 302-2-21:2018(Heating : Temp of Walls, ceilings and floor of the test corner )	-	500	20% DISCOUNT TO BIS
Cl.10 of IS 302-2-21: 2018(Power Input & Current)	-	500	20% DISCOUNT TO BIS
Cl.8 of IS 302-2-21:2018(Protection Against Access to Live Parts)	-	500	20% DISCOUNT TO BIS
7.101(Marking : Indifiction of water inlet and water outlet )	-	500	20% DISCOUNT TO BIS
7.14(Marking : Legibility and durability)	-	500	20% DISCOUNT TO BIS
7.13(Marking : Official language of Instruction )	-	500	20% DISCOUNT TO BIS
7.11(Marking : Indication of controls )	-	500	20% DISCOUNT TO BIS
7.8(Marking : Terminals )	-	500	20% DISCOUNT TO BIS
7.6(Marking : Symbol used )	-	500	20% DISCOUNT TO BIS
7.1(Marking : Warning for Open- outlet )	-	500	20% DISCOUNT TO BIS
7.1(Marking : Statement for pressure reducing valve ( For rated pressure less than 0.6 MPa))	-	500	20% DISCOUNT TO BIS
7.1(Marking : Statement for a pressure-relief device)	-	500	20% DISCOUNT TO BIS
7.1(Marking : Rated capacity)	-	500	20% DISCOUNT TO BIS
7.1(Marking : Rated pressure)	-	500	20% DISCOUNT TO BIS
7.1(Marking : Country of manufacture)	-	500	20% DISCOUNT TO BIS
7.1(Marking: IP Number)	-	500	20% DISCOUNT TO BIS
7.1(Marking: Symbol for Class II)	-	500	20% DISCOUNT TO BIS
7.1(Marking: Model or type reference)	-	500	20% DISCOUNT TO BIS
7.1(Marking: Name, trademark or identification mark of manufacturer )	-	500	20% DISCOUNT TO BIS
7.1(Marking : Rated power input)	-	500	20% DISCOUNT TO BIS
7.1(Marking : Symbol for nature of supply )	-	500	20% DISCOUNT TO BIS
7.1(Marking : Rated Voltage )	-	500	20% DISCOUNT TO BIS
Cl.32 of IS 302-1:2008()	-	500	20% DISCOUNT TO BIS
4(GENERAL REQUIREMENT)	-	500	20% DISCOUNT TO BIS
5(GENERAL CONDITIONS FOR THE TESTS)	-	500	20% DISCOUNT TO BIS
12(THERMOSTAT SETTING)	-	500	20% DISCOUNT TO BIS
Cl-10(Mounting of the water heater)	-	500	20% DISCOUNT TO BIS
Cl-11(Measurements of stored water temperature)	-	500	20% DISCOUNT TO BIS
Cl-12(Thermostat setting)	-	500	20% DISCOUNT TO BIS
Cl-13(Measurement of energy consumption)	-	500	20% DISCOUNT TO BIS
Cl-14(Verification of the rated capacity)	-	500	20% DISCOUNT TO BIS

15 Oct, 2027

-
-

10178

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 18316 (2023)

HOT ROLLED AND COLD ROLLED STEEL STRIPS INTENDED FOR PROCESSING OF SEMIFULLY PROCESSED NON-GRAIN ORIENTED ELECTRICAL STEEL OR FULLY PROCESSED GRAIN ORIENTED ELECTRICAL STEEL SPECIFICATION

Low, Medium , High, very high silicon

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 7.0(Carbon)	-	1000	-
Clause. 7.0(Silicon)	-	1000	-
Clause. 7.0(Sulphur)	-	1000	-
Clause. 7.0(Phosphorus)	-	1000	-
Clause. 7.0(Manganese)	-	1000	-
Clause. 7.0(Aluminium)	-	2000	-
Clause.8.0(Freedom From Defects)	-	500	-
Clause.9.0(Dimensions, Shape & Tolerances (for Hot-rolled Steel))	-	2500	-
Clause.10.0(Dimensions, Shape & Tolerances (for Cold-rolled Steel))	-	1000	-

31 Dec, 2029

-
Included w.e.f. 25.07.2024

10179

Classic Testing & Research Centre (B17), Noida

8180826

IS 7872 (2020)

Deep Freezers - Specification ( Second Revision )

150000 View breakup
20% concession in testing charges to BIS

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.2.12(Temperature rise test)	-	5000	20% discount to BIS
10.2.11(Measurement )	-	5000	20% discount to BIS
10.2.10.1(Test packages and life time)	-	5000	20% discount to BIS
10.2.10(Full load test)	-	5000	20% discount to BIS
10.2.8(Earth resistance test )	-	5000	20% discount to BIS
10.2.7(Leakage current test )	-	5000	20% discount to BIS
10.2.6(Insulation resistance test)	-	5000	20% discount to BIS
10.2.5(High voltage test)	-	5000	20% discount to BIS
10.2.3(Thermal insulation test )	-	5000	20% discount to BIS
10.2.2(Machanical strength of shelves and similar components)	-	5000	20% discount to BIS
10.2.1(Door seal test )	-	5000	20% discount to BIS
9.2.2(Power consumption & percentage running time)	-	5000	20% discount to BIS
9.2.1(Pull down time)	-	10000	20% discount to BIS
9.1(No load test)	-	5000	20% discount to BIS
6.11(Volume measurement Water fill method)	-	5000	20% discount to BIS
6(Measurement of freezer storage capacity)	-	5000	20% discount to BIS
5.1(Sound level)	-	5000	20% discount to BIS
5.6(External surface condensation test)	-	5000	20% discount to BIS
5.5(Strength Pressure test for components)	-	5000	20% discount to BIS
4.8(Doors & Fittings)	-	5000	20% discount to BIS
13(Marking and Instruction)	-	5000	20% discount to BIS
11.7(Pressure Test)	-	5000	20% discount to BIS
11.6(Thermal Insulation Test ( External Condensation))	-	5000	20% discount to BIS
11.5(Mechanical Strength of Shelves and Similar Components)	-	5000	20% discount to BIS
11.4(Door Seal Test)	-	5000	20% discount to BIS
11.3(Temperature Rise Test)	-	5000	20% discount to BIS
11.2(Energy Consumption Test)	-	5000	20% discount to BIS
11.1(No load Pull down Test)	-	5000	20% discount to BIS
8(Freezer Storage Capacity)	-	5000	20% discount to BIS
7(Sound Pressure Level)	-	5000	20% discount to BIS
6(Safety Requirements)	-	5000	20% discount to BIS
5.4.4(Fatigue Test)	-	5000	20% discount to BIS
5.4.3(Individual Strength - Pressure Test)	-	5000	20% discount to BIS
5.4.2(Individual Strength - Pressure Test)	-	5000	20% discount to BIS
4.8(Door and Fittings)	-	5000	20% discount to BIS
13(Marking and Instruction)	-	5000	20% discount to BIS
11.7(Pressure Test)	-	5000	20% discount to BIS
11.6(Thermal Insulation Test ( External Condensation))	-	5000	20% discount to BIS
11.5(Mechanical Strength of Shelves and Similar Components)	-	5000	20% discount to BIS
11.4(Door Seal Test)	-	5000	20% discount to BIS
11.3(Temperature Rise Test)	-	5000	20% discount to BIS
11.2(Energy Consumption Test)	-	5000	20% discount to BIS
11.1(No load Pull down Test)	-	5000	20% discount to BIS
8(Freezer Storage Capacity)	-	5000	20% discount to BIS
7(Sound Pressure Level)	-	5000	20% discount to BIS
6(Safety Requirements)	-	5000	20% discount to BIS
5.4.4(Fatigue Test)	-	5000	20% discount to BIS
5.4.3(Individual Strength - Pressure Test)	-	5000	20% discount to BIS
5.4.2(Individual Strength - Pressure Test)	-	5000	20% discount to BIS
4.8(Door and Fittings)	-	5000	20% discount to BIS
5(Refrigeration system)	-	5000	20% discount to BIS
Cl-4.1(General Design)	-	5000	20% discount to BIS
Cl-4.2(Materials)	-	5000	20% discount to BIS
Cl-4.3(Finish)	-	5000	20% discount to BIS
Cl-4.4(Thermal Insulation)	-	5000	20% discount to BIS
Cl-4.5(Fittings)	-	5000	20% discount to BIS
Cl-4.6(Hardware)	-	5000	20% discount to BIS
Cl-4.7(Interior Fittings)	-	5000	20% discount to BIS
Cl-4.8(Doors and Fittings)	-	5000	20% discount to BIS
Cl-4.9(Disposal of Defrost / Condensate Water)	-	5000	20% discount to BIS
Cl-5.1(Construction)	-	5000	20% discount to BIS
Cl-5.2(Control of Operation)	-	5000	20% discount to BIS
Cl-5.3(Location of Components)	-	5000	20% discount to BIS
6.5(For flammable refrigerant the units should comply with IS/IEC 60335-2-89)	-	5000	20% discount to BIS
6.2(The compressor shall comply with the requirements of IS 10617)	-	5000	20% discount to BIS

15 Oct, 2027

-
-

10180

Classic Testing & Research Centre (B17), Noida

8180826

IS 302 : Part 1 (2008)

Safety of household and similar electrical appliances: Part 1 general requirements (Sixth Revision)

24000 View breakup
20% concession in testing charges to BIS

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	1000	20% discount to BIS
8.1.1(Protection against live parts in all positions)	-	1000	20% discount to BIS
8.1.2(Protection against live parts in openings)	-	1000	20% discount to BIS
8.1.3(Protection against live parts in visible glowing heating elements)	-	1000	20% discount to BIS
8.1.4(Protection against live parts against protective impedance)	-	1000	20% discount to BIS
9(Starting of motor operation test requirements and tests)	-	1000	20% discount to BIS
10.1(Power input)	-	1000	20% discount to BIS
10.2(Current input)	-	1000	20% discount to BIS
11.1(General)	-	1000	20% discount to BIS
11.2(General)	-	1000	20% discount to BIS
11.3(Heating)	-	1000	20% discount to BIS
13.1(General)	-	1000	20% discount to BIS
13.2(Leakage current at operating temperature)	-	1000	20% discount to BIS
13.3(Electric Strength at operating temperature)	-	1000	20% discount to BIS
14(Transient Over Voltages)	-	1000	20% discount to BIS
15.0(General)	-	1000	20% discount to BIS
15.1(Ingress Protection test other than IPX0 (IP test))	-	1000	20% discount to BIS
15.2(Spillage Test)	-	1000	20% discount to BIS
15.3(Humidity Test)	-	1000	20% discount to BIS
16.0(General)	-	1000	20% discount to BIS
16.1(General)	-	1000	20% discount to BIS
16.2(Leakage Current (after Clause 15))	-	1000	20% discount to BIS
16.3(Electric Strength (after clause 15 and 16.2))	-	1000	20% discount to BIS
17(Over Load Protection of Transformers and associated circuits)	-	1000	20% discount to BIS
18(Endurance Test requirements and tests)	-	1000	20% discount to BIS
19(Abnormal Operation)	-	1000	20% discount to BIS
20(Stability test)	-	1000	20% discount to BIS
21(Mechanical Strength Test)	-	1000	20% discount to BIS
22(Construction verification related test)	-	1000	20% discount to BIS
23(General)	-	1000	20% discount to BIS
24(Components)	-	1000	20% discount to BIS
25(Supply connection and external flexible cords)	-	1000	20% discount to BIS
26(Terminals for external conductors)	-	1000	20% discount to BIS
27(Provision for earthing)	-	1000	20% discount to BIS
28(Screw test and connections)	-	1000	20% discount to BIS
29(clearance, creepage distances and solid insulation)	-	1000	20% discount to BIS
30.1(Ball pressure test)	-	1000	20% discount to BIS
30.2(Glow Wire Test)	-	1000	20% discount to BIS
30.2(Needle Flame Test)	-	1000	20% discount to BIS
31(Resistance to Rusting)	-	1000	20% discount to BIS
32(Radiation Toxicity and Similar Hazards)	-	1000	20% discount to BIS
4(General requirement)	-	1000	20% discount to BIS
16(Leakage current and electric strength)	-	1000	20% discount to BIS
17(Overload protection of transformers and associated circuits)	-	1000	20% discount to BIS
18(Endurance)	-	1000	20% discount to BIS
8.1.5(Live parts of built-in appliances)	-	1000	20% discount to BIS
11.4(Heating appliances)	-	1000	20% discount to BIS
11.5(Motor-operated appliances)	-	1000	20% discount to BIS
11.6(Combined appliances)	-	1000	20% discount to BIS
11.7(Duration corresponding)	-	1000	20% discount to BIS
11.8(Temperature rise)	-	1000	20% discount to BIS
19.11.4.1(Electrostatic discharges)	-	1000	20% discount to BIS
19.11.4.3(Fast transient bursts)	-	1000	20% discount to BIS
19.11.4.4(Surge immunity test)	-	1000	20% discount to BIS
19.11.4.6(Class 3 Voltage dips and interruptions)	-	1000	20% discount to BIS
19.11.4.7(Harmonics)	-	1000	20% discount to BIS
4(General Requirement)	-	1000	20% discount to BIS
5(General conditions for tests)	-	1000	20% discount to BIS
6(Classification- IS 302-1)	-	1000	20% discount to BIS
19.11.4.2(Radiated fields)	-	1000	20% discount to BIS
19.11.4.5(Immunity to conducted discharges)	-	1000	20% discount to BIS

15 Oct, 2027

view Scope file
Exclusion: 19.11.4.2(Radiated field),19.11.4.5(Immunity to conducted discharges) "(1)Cooking ranges, hobs, ovens and similar appliances, (2)Commercial Dispensing Appliances and Vending Machines, (3) spin extractors (For testing charges please refer relevant Part 2 standard in LIMS)"

10181

Classic Testing & Research Centre (B17), Noida

8180826

IS 302 : Part 2 : Sec 7 (2024)

Safety of Household And Similar Electrical Appliances Part 2 Particular Requirements Section 7: Domestic Electric Clothes Washing Machines

55000 View breakup
20% concession in testing charges to BIS

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(GENERAL REQUIREMENT)	-	1000	20% discount to BIS
6(CLASSIFICATION)	-	1000	20% discount to BIS
7(MARKING AND INSTRUCTIONS)	-	1000	20% discount to BIS
8(PROTECTION AGAINST ACCESS TO LIVE PARTS)	-	1000	20% discount to BIS
10(POWER INPUT AND CURRENT)	-	1000	20% discount to BIS
11(HEATING)	-	1000	20% discount to BIS
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	1000	20% discount to BIS
14(TRANSIENT OVERVOLTAGES)	-	1000	20% discount to BIS
15(MOISTURE RESISTANCE)	-	1000	20% discount to BIS
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	1000	20% discount to BIS
17("OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS ")	-	1000	20% discount to BIS
17("OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS ")	-	1000	20% discount to BIS
18(ENDURANCE)	-	1000	20% discount to BIS
19(ABNORMAL OPERATION)	-	1000	20% discount to BIS
19.11.4.1(Electrostatic discharges)	-	1000	20% discount to BIS
19.11.4.3(Fast transient bursts)	-	1000	20% discount to BIS
19.11.4.4(Surge immunity test)	-	1000	20% discount to BIS
19.11.4.6(Class 3 Voltage dips and interruptions)	-	1000	20% discount to BIS
19.11.4.7(Harmonics)	-	1000	20% discount to BIS
20(STABILITY AND MECHANICAL HAZARDS)	-	1000	20% discount to BIS
21(MECHANICAL STRENGTH)	-	1000	20% discount to BIS
22(CONSTRUCTION)	-	1000	20% discount to BIS
23(INTERNAL WIRING)	-	1000	20% discount to BIS
24(COMPONENTS)	-	1000	20% discount to BIS
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	1000	20% discount to BIS
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	1000	20% discount to BIS
27(PROVISION FOR EARTHING)	-	1000	20% discount to BIS
28(SCREWS AND CONNECTIONS)	-	1000	20% discount to BIS
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	1000	20% discount to BIS
30(RESISTANCE TO HEAT AND FIRE)	-	1000	20% discount to BIS
31(RESISTANCE TO RUSTING)	-	1000	20% discount to BIS
19.13(ABNORMAL OPERATION)	-	1000	20% discount to BIS
19.101(Abnormal Operation)	-	1000	20% discount to BIS
19.102(Abnormal Operation)	-	1000	20% discount to BIS
19.11.4.2(Radiated fields)	-	1000	20% discount to BIS
19.11.4.5(Immunity to conducted discharges)	-	1000	20% discount to BIS

15 Oct, 2027

-
Exclusion: 19.11.4.2(Radiated field),19.11.4.5(Immunity to conducted discharges)

10182

CIPET, Lucknow

9102534

IS 4270 (2001)

Steel tubes used for water wells specification (Third Revision)

8700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 6(Tensile Test & Flattening Test)	-	1100	-
Cl 7(Outer Diameter, Thickness, Mass & Straightness)	-	1500	-
Cl 9(Pipe ends, Angle of bevel & Root Face )	-	1500	-
Cl 10(Outer Diameter & Overall Length)	-	1000	-
Cl 12(Bituminous Coating & Galvanizing )	-	1000	-
Cl 14(Workmanship)	-	500	-
Cl 6(Tensile Test & Flattening Test)	-	1100	-
Cl 7(Outer Diameter, Thickness, Mass & Straightness)	-	1500	-
Cl 9(Pipe ends, Angle of bevel & Root Face )	-	1500	-
Cl 10(Outer Diameter & Overall Length)	-	1000	-
Cl 12(Bituminous Coating & Galvanizing )	-	1000	-
Cl 14(Workmanship)	-	500	-
Cl 6(Tensile Test & Flattening Test)	-	1100	-
Cl 7(Outer Diameter, Thickness, Mass & Straightness)	-	1500	-
Cl 9(Pipe ends, Angle of bevel & Root Face )	-	1500	-
Cl 10(Outer Diameter & Overall Length)	-	1000	-
Cl 12(Bituminous Coating & Galvanizing )	-	1000	-
Cl 14(Workmanship)	-	500	-
5.2(phosphorus)	-	1000	-
5.2(sulphur)	-	1000	-
Cl 14(Workmanship)	-	500	-
Cl 12(Bituminous Coating & Galvanizing )	-	1000	-
Cl 10(Outer Diameter & Overall Length)	-	1000	-
Cl 9(Pipe ends, Angle of bevel & Root Face )	-	1500	-
Cl 7(Outer Diameter, Thickness, Mass & Straightness)	-	1500	-
Cl 6(Tensile Test & Flattening Test)	-	1100	-
Cl 6(Tensile Test & Flattening Test)	-	1100	-
Cl 7(Outer Diameter, Thickness, Mass & Straightness)	-	1500	-
Cl 9(Pipe ends, Angle of bevel & Root Face)	-	1500	-
Cl 10(Outer Diameter & Overall Length)	-	1000	-
Cl 12(Bituminous Coating & Galvanizing)	-	1000	-
Cl 14(Workmanship)	-	500	-
11.0(Alignment test IS 4270: 2001)	-	1000	-

31 Dec, 2026

-
Included w.e.f. 20.08.2024

10183

CIPET, Lucknow

9102534

IS 8521 : Part 1 (1977)

Specification for industrial safety face shields: Part 1 with plastics visor

7775 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 3(General requirements & Specific requirements)	-	500	-
Cl 4(Visual and Dimensional Examination & Physical Requirements (Impact Resistance, Penetration Resistance, Visible Transmittance, Flammability & Disinfection))	-	8200	-
Cl 4(Visual and Dimensional Examination & Physical Requirements (Impact Resistance, Penetration Resistance, Visible Transmittance, Flammability & Disinfection))	-	8200	-
Cl 3(General requirements & Specific requirements)	-	500	-

31 Dec, 2026

-
Included w.e.f. 20.08.2024

10184

CIPET, Lucknow

9102534

IS 13422 (1992)

Disposable surgical rubber gloves specification

13713 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2.3(thickness)	-	500	-
5.1(Material identification (Chemical Analysis))	-	1050	-
5.5(Airtight Test)	-	16450	10950+5500
5.3 and Table 2( Elongation at Break After Accelerated Ageing)	-	1100	-
5.3 and Table 2( Tensile StrengthAfter Accelerated Ageing)	-	1800	1300+500
5.3 and Table 2(Stress at 500% Elongation at Break Before Ageing)	-	1300	-
5.3 and Table 2( Elongation at Break Before Ageing)	-	1100	-
5.3 and Table 2( Tensile Strength Before Ageing)	-	1800	1300+500
5.2.2 and Table 1 Fig. 1(Dimensions - Thickness of Cuff)	-	500	-
5.2.2 and Table 1 Fig. 1(Dimensions - Thickness of Palm)	-	500	-
5.2.2 and Table 1 Fig. 1(Dimensions - Thickness of Finger)	-	500	-
5.2.2 and Table 1 Fig. 1(Dimensions - Width)	-	500	-
5.2.2 and Table 1 Fig. 1(Dimensions - Length)	-	500	-
5.2.1(General Characteristics and Dimensions)	-	500	-
4(TYPES)	-	500	-
5.4(Sterility)	-	5000	-

31 Dec, 2026

-
Included w.e.f. 20.08.2024

10185

IDMA LABORATORIES LIMITED, PANCHKULA

9123236

IS 7887 (1992)

Mild steel wire rod for general engineering purposes - Specification (First Revision)

6500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Carbon %)	-	500	-
6.1(Silicon %)	-	500	-
6.1(Manganese %)	-	500	-
6.1(Sulphur %)	-	500	-
6.1(Phosphorus %)	-	500	-
6.1( Aluminium %)	-	500	-
6.1(Carbon %)	-	500	Testing charges for Copper %
6.1(Manganese %)	-	1500	Testing charges for Niobium, Vanadium & Titanium
Cl 8(Freedom from defects)	-	500	-
Cl 9(Nominal Diameter & Out Of Shape)	-	500	Testing charges for Diameter
Cl. 9(Out of Shape)	-	500	-
Cl 8(Workmanship)	-	0	NA
Cl 9(Nominal Diameter & Out Of Shape)	-	0	NA
Cl 8(Workmanship)	-	0	NA
Cl 9(Nominal Diameter & Out Of Shape)	-	0	NA
6.1(Phosphorus %)	-	0	NA
6.1(Sulphur %)	-	0	NA
6.1(Silicon %)	-	0	NA
6.1( Aluminium %)	-	0	NA
6.1(Carbon %)	-	0	NA
6.1(Manganese %)	-	0	NA
6.1(Phosphorus %)	-	0	NA
6.1(Sulphur %)	-	0	NA
6.1(Silicon %)	-	0	NA
6.1( Aluminium %)	-	0	NA
Cl 9(Nominal Diameter & Out Of Shape)	-	0	NA
Cl 8(Workmanship)	-	0	NA
Cl 8(Workmanship)	-	0	NA
Cl 9(Nominal Diameter & Out Of Shape)	-	0	NA
Table 1 Note 3(Any Instrumental Method/Chemical Method)	-	0	NA
Amendment 1(Any Instrumental Method/Chemical Method)	-	0	NA
Amendment 1(Any Instrumental Method/Chemical Method)	-	0	NA
Amendment 1(Any Instrumental Method/Chemical Method)	-	0	NA
Amendment 1(By Calculation)	-	0	NA
Table 1 Note 3(Any Instrumental Method/Chemical Method)	-	0	NA
Amendment 1(Any Instrumental Method/Chemical Method)	-	0	NA
Amendment 1(Any Instrumental Method/Chemical Method)	-	0	NA
Amendment 1(Any Instrumental Method/Chemical Method)	-	0	NA
Amendment 1(Any Instrumental Method/Chemical Method)	-	0	NA
Amendment 1(By Calculation)	-	0	NA
Table 1 Note 3(Copper)	-	0	NA
Amendment 1(Niobium)	-	0	NA
Amendment 1(Vanadium)	-	0	NA
Amendment 1(Titanium)	-	0	NA
Amendment 1(Micro Alloying Element (Nb+V+Ti))	-	0	NA
9.1(Diameter - SOP-MT-23)	-	0	NA
9.3(Out of Shape - SOP-MT-23)	-	0	NA
11(Marking)	-	0	NA
Table 1 Note 3(Copper)	-	0	NA
Amendment 1(Niobium)	-	0	NA
Amendment 1(Vanadium)	-	0	NA
Amendment 1(Titanium)	-	0	NA
Amendment 1(Micro Alloying Element (Nb+V+Ti))	-	0	NA

31 Dec, 2029

-
Included w.e.f.21.11.2024

10186

IDMA LABORATORIES LIMITED, PANCHKULA

9123236

IS 1997 (2008)

Laboratory glassware - Burettes (Third Revision)

23000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Maximum permissible errors)	-	3500	Testing charges for Maximum permissible errors
11(Markings )	-	2000	Testing charges for Material (Hydrolytic resistance Test)
5.1(Class of Accuracy)	-	1500	Testing charges for Colored stripe
5.2(Types)	-	800	Testing charges for Dimensions Overall length
8(Construction)	-	800	Testing charges for Subdivision
Table 2(i) Scale length )	-	1000	Testing charges for Scale length
Table 3( ii) Overall length )	-	800	Testing charges for Distance of zero line from top of burette
Table 5(iv) Distance of lowest graduation line from the top of stopcock )	-	800	Testing charges for Distance of lowest graduation line from top of stopcock
Table 6(v) Length of tube of uniform bore below graduation line )	-	800	Testing charges for Length of tube of uniform bore below lowest graduation line
Table 7(vi) Distance of end of jet from underside of stopcock )	-	800	Testing charges for Distance of end of jet from underside of stopcock
8.2( c) Top of burette )	-	800	Testing charges for Top of burette
8.3(d) Stopcock and similar devices)	-	800	Testing charges for Stopcock and similar devices
8.4(e) Stop Cock Leakage)	-	1500	Testing charges for Stop Cock Leakage
8.5( f) Delivery jet)	-	1000	Testing charges for Delivery jet
8.6(g) Delivery time )	-	1500	Testing charges for Delivery time
8.6(g) Delivery time )	-	800	Testing charges for Waiting time
9.1(a) Graduations patterns )	-	500	Testing charges for Graduations patterns
9.2(Position of graduation line)	-	800	Testing charges for Position of graduation line
9.3(c) Marking of graduation lines )	-	1000	Testing charges for Marking of graduation lines
11(Markings )	-	800	Testing charges for Markings
12(. Visibility of graduation line)	-	700	Testing charges for Visibility of graduation line
Table 4(iii) Distance of Zero line from top of burette )	-	0	NA
9(Graduations, figuring and patterns )	-	0	NA
5.1(Class of Accuracy)	-	0	NA
5.2(Types)	-	0	NA
6.1(Maximum permissible errors)	-	0	NA
8(Construction)	-	0	NA
Table 2(i) Scale length )	-	0	NA
Table 3( ii) Overall length )	-	0	NA
Table 4(iii) Distance of Zero line from top of burette )	-	0	NA
Table 5(iv) Distance of lowest graduation line from the top of stopcock )	-	0	NA
Table 6(v) Length of tube of uniform bore below graduation line )	-	0	NA
Table 7(vi) Distance of end of jet from underside of stopcock )	-	0	NA
8.2( c) Top of burette )	-	0	NA
8.3(d) Stopcock and similar devices)	-	0	NA
8.4(e) Stop Cock Leakage)	-	0	NA
8.5( f) Delivery jet)	-	0	NA
8.6(g) Delivery time )	-	0	NA
8.6(g) Delivery time )	-	0	NA
9(Graduations, figuring and patterns )	-	0	NA
9.1(a) Graduations patterns )	-	0	NA
9.2(Position of graduation line)	-	0	NA
9.3(c) Marking of graduation lines )	-	0	NA
12(. Visibility of graduation line)	-	0	NA
11(Markings )	-	0	NA
5.1(Class of Accuracy)	-	0	NA
5.2(Types)	-	0	NA
6.1(Maximum permissible errors)	-	0	NA
8(Construction)	-	0	NA
Table 2(i) Scale length )	-	0	NA
Table 3( ii) Overall length )	-	0	NA
Table 4(iii) Distance of Zero line from top of burette )	-	0	NA
Table 5(iv) Distance of lowest graduation line from the top of stopcock )	-	0	NA
Table 6(v) Length of tube of uniform bore below graduation line )	-	0	NA
Table 7(vi) Distance of end of jet from underside of stopcock )	-	0	NA
8.2( c) Top of burette )	-	0	NA
8.3(d) Stopcock and similar devices)	-	0	NA
8.4(e) Stop Cock Leakage)	-	0	NA
8.5( f) Delivery jet)	-	0	NA
8.6(g) Delivery time )	-	0	NA
8.6(g) Delivery time )	-	0	NA
9(Graduations, figuring and patterns )	-	0	NA
9.1(a) Graduations patterns )	-	0	NA
9.2(Position of graduation line)	-	0	NA
9.3(c) Marking of graduation lines )	-	0	NA
12(. Visibility of graduation line)	-	0	NA

31 Dec, 2029

-
Included w.e.f.21.11.2024

10187

IDMA LABORATORIES LIMITED, PANCHKULA

9123236

IS 2618 (2016)

Laboratory glassware - Test tubes (Third Revision)

11500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. No. 4, Table no. 1(i)("Water resistance ")	-	2000	-
Cl. No. 4, Table no. 1(ii)(Acid resistance)	-	2000	-
Cl. No. 4, Table no. 1(ii)(Alkali resistance)	-	2000	-
Cl. No. 5, Table no.2 to 4(Construction and dimensions)	-	2500	Testing Charges for (Top -Open end, Length, External diameter, Wall thickness, Wall thickness of bottom) are Rs. 500/- for each parameter.
Cl. No. 6("Marking ")	-	0	Testing charges for Material – Coefficient of Thermal Expansion are Rs. 3000/-

31 Dec, 2029

-
Included w.e.f.21.11.2024

10188

IDMA LABORATORIES LIMITED, PANCHKULA

9123236

IS 1117 (2018)

Laboratory glassware - Single - Volume pipettes (Second Revision)

17000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1.1&3(Marking)	-	0	NA
3(Class of Accuracy)	-	2000	Testing charges for Maximum Permissible Error
5.1(Material)	-	2000	Testing charges for Material (water resistance test)
6.1.2(Marking)	-	1000	Testing charges for Shape
5.6&7(Graduation line & Visibility )	-	500	Testing charges for Bulb
5.4(vii) Overall length, L)	-	500	Testing charges for Dimension Overall length
5.5(Delivery Time)	-	500	Testing charges for Internal diameter at the graduation line
5.4(viii) Length of suction tube, L1 )	-	500	Testing charges for Length of suction tube
5.4(ix) Length of delivery tube, L2 )	-	500	Testing charges for Length of delivery tube,
5.5(Delivery Time)	-	500	Testing charges for External diameter of delivery tube
5.4(xi) External dia. of bulb D2 )	-	500	Testing charges for External diameter of bulb
5.4(xii) External dia. of delivery tube D3 )	-	500	Testing charges for External diameter of tube
5.4(i) Distance of graduation line from top of pipette.)	-	500	Testing charges for Distance of graduation line from top of pipette
5.4(ii) Distance from graduation line to top of bulb(pattern 2))	-	500	Testing charges for Distance from graduation line to top of bulb
5.4(iii)Distance from graduation line to tip of jet (Pattern 1))	-	500	Testing charges for Distance from graduation line to tip of jet
5.4(iv) Wall thickness)	-	500	Testing charges for Wall thickness
5.4(xii) External dia. of delivery tube D3 )	-	0	NA
5.4(xi) External dia. of bulb D2 )	-	500	Testing charges for Distance from lower graduation line to bottom of bulb
5.4(x) Internal dia. of suction tube D1 )	-	500	Testing charges for Top of pipette
5.4(ix) Length of delivery tube, L2 )	-	500	Testing charges for Delivery jet
5.4(viii) Length of suction tube, L1 )	-	0	NA
5.4(vii) Overall length, L)	-	0	NA
5.4(vi)Distance from top of pipette to bottom of safety bulb )	-	0	NA
5.5(Delivery Time)	-	1500	Testing charges for Delivery Time
5.4(v) Dia. of safety bulb (if provided ))	-	500	Testing charges for Waiting time
5.6&7(Graduation line & Visibility )	-	1000	Testing charges for Graduation line
6.1.2(Marking)	-	500	Testing charges for Visibility of graduation lines, figures and inscriptions
5.4(b) Other pipettes)	-	1000	Testing charges for Colour coding
5.4(a) pattern 2 pipette of 1 and 2ml )	-	0	NA
5.4(iv) Wall thickness)	-	0	NA
5.4(iii)Distance from graduation line to tip of jet (Pattern 1))	-	0	NA
5.4(ii) Distance from graduation line to top of bulb(pattern 2))	-	0	NA
5.4(i) Distance of graduation line from top of pipette.)	-	0	NA
5.3(Workmanship & Finish)	-	0	NA
5.2(Pattern of Pipette)	-	0	NA
5.1.1(Limit of Alkalinity)	-	0	NA
5.1(Material)	-	0	NA
5.1(Material)	-	0	NA
4.2(Accuracy)	-	0	NA
4.1(Nominal capacities)	-	0	NA
3(Class of Accuracy)	-	0	NA
6.1.1&3(Marking)	-	0	NA
6.1.2(Marking)	-	0	NA
5.6&7(Graduation line & Visibility )	-	0	NA
5.5(Delivery Time)	-	0	NA
5.5(Delivery Time)	-	0	NA
5.4(xii) External dia. of delivery tube D3 )	-	0	NA
5.4(xi) External dia. of bulb D2 )	-	0	NA
5.4(x) Internal dia. of suction tube D1 )	-	0	NA
5.4(ix) Length of delivery tube, L2 )	-	0	NA
5.4(viii) Length of suction tube, L1 )	-	0	NA
5.4(vii) Overall length, L)	-	0	NA
5.4(vi)Distance from top of pipette to bottom of safety bulb )	-	0	NA
5.4(v) Dia. of safety bulb (if provided ))	-	0	NA
5.4(b) Other pipettes)	-	0	NA
5.4(a) pattern 2 pipette of 1 and 2ml )	-	0	NA
5.4(iv) Wall thickness)	-	0	NA
5.4(iii)Distance from graduation line to tip of jet (Pattern 1))	-	0	NA
5.4(ii) Distance from graduation line to top of bulb(pattern 2))	-	0	NA
5.4(i) Distance of graduation line from top of pipette.)	-	0	NA
5.3(Workmanship & Finish)	-	0	NA
5.2(Pattern of Pipette)	-	0	NA
5.1.1(Limit of Alkalinity)	-	0	NA
5.1(Material)	-	0	NA
5.1(Material)	-	0	NA
4.2(Accuracy)	-	0	NA
4.1(Nominal capacities)	-	0	NA
3(Class of Accuracy)	-	0	NA
6.1.1&3(Marking)	-	0	NA
5.5(Delivery Time)	-	0	NA
5.4(x) Internal dia. of suction tube D1 )	-	0	NA
5.4(vi)Distance from top of pipette to bottom of safety bulb )	-	0	NA
5.4(v) Dia. of safety bulb (if provided ))	-	0	NA
5.4(b) Other pipettes)	-	0	NA
5.4(a) pattern 2 pipette of 1 and 2ml )	-	0	NA
5.3(Workmanship & Finish)	-	0	NA
5.2(Pattern of Pipette)	-	0	NA
5.1.1(Limit of Alkalinity)	-	0	NA
5.1(Material)	-	0	NA
4.2(Accuracy)	-	0	NA
4.1(Nominal capacities)	-	0	NA

31 Dec, 2029

-
Included w.e.f. 20.11.2024

10189

IDMA LABORATORIES LIMITED, PANCHKULA

9123236

IS 878 (2008)

Laboratory glassware - Graduated measuring cylinders (Second Revision)

13600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table-1(Nominal capacity)	-	0	-
Table-1(Overall height)	-	800	-
Table-1(Distance from top of scale to top of cylinder)	-	800	-
Table-1(Internal height to highest graduation line)	-	800	-
Table-1(Sub-divisions)	-	800	-
Table-1(capacity at lowest graduation line)	-	800	-
Cl-9.1(Wall thickness)	-	700	-
Cl-9.2(Stability)	-	700	-
Cl-9.3(Base)	-	700	-
Cl-9.4(Rim and spout)	-	700	-
Cl-9.5(Neck and stopper)	-	700	-
Cl-10.1(Graduation)	-	700	-
Cl-10.2(Figuring)	-	700	-
Cl-11(Accuracy testing)	-	700	Testing charges for Marking are Rs. 700/-
Cl-13(Visibility of graduation lines, figures and marking)	-	1000	Testing charges for Visibility of graduation lines, number and inscriptions are Rs. 1000/-
Cl-9.6, Table-2(capacity at lowest graduation line)	-	1000	Testing charges for Material (Hydrolytic resistance Test) are Rs. 1000/-
Cl-9.6, Table-2(Sub divisions)	-	2000	Testing charges for Maximum permissible errors are Rs. 2000/-
Cl-9.6, Table-2(Nominal capacity)	-	0	NA
Cl-9.6, Table-2(Overall height)	-	0	NA
Cl-9.6, Table-2(Distance from top of scale to top of cylinder)	-	0	NA
Cl-9.6, Table-2(Internal height to highest graduation line)	-	0	NA

31 Dec, 2029

-
Included w.e.f. 30.10.2024

10190

IDMA LABORATORIES LIMITED, PANCHKULA

9123236

IS 915 (2012)

Laboratory glassware - One - Mark volumetric flasks (Third Revision)

15500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1(Material)	-	2500	Testing charges for Material as per clause no. 8.1 (Coefficient of Thermal expansion) are Rs. 1500/- Testing charges for Material as per clause no. 8.1 (Hydrolytic resistance) are Rs. 1000/-
Table 1(Wall Thickness)	-	800	-
8.3(Shape)	-	800	-
8.4(Neck)	-	800	-
8.5(Stopper)	-	700	-
8.6(Dimensions)	-	0	-
Table 1(Nominal Capacity)	-	0	-
Table 1(Internal Neck Diameter)	-	800	-
Table 1(Distance of graduation line)	-	800	-
Table-2(Nominal capacity)	-	2500	Testing charges for Maximum Permissible error are Rs. 2500/-.
Table 1(Overall Height)	-	800	-
Table 1(Bulb Diameter)	-	800	-
Table 1(Base Diameter)	-	800	-
Table 1(Ground joint k4)	-	800	-
Table 1(Ground joint k6)	-	0	Testing charges already mentioned above.
9.0(Graduation Line)	-	800	-
Table-2(Internal neck diameter)	-	800	Testing charges for Marking and Designation
12.1(Visibility of graduation line, figures and marking)	-	1000	-
12.2(Visibility of graduation line, figures and marking)	-	0	NA
Table-2(Distance of graduation line 1))	-	0	NA
Table-2(Overall height 2))	-	0	NA
Table-2(Bulb diameter)	-	0	NA
Table-2(Base diameter)	-	0	NA
Table-2(Wall thickness)	-	0	NA
Table-2(Ground joint 3) k4)	-	0	NA
Table-2(Ground joint 3) k6)	-	0	NA

31 Dec, 2029

-
Included w.e.f. 30.10.2024

10191

IDMA LABORATORIES LIMITED, PANCHKULA

9123236

IS 3975 (1999)

Low carbon galvanized steel wires, formed wires and tapes for armouring of cables - Specification (Third Revision)

5700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.2(Phosphorus %)	-	600	-
6.2(Sulphur %)	-	600	-
7(Dimensions)	-	500	Dimensions and tolerances of round wires and tapes
7(Dimensions)	-	500	Dimensions and tolerances of formed wire
8.1(Mechanical Properties (as per table 5 of IS 1608))	-	800	Testing charges for Tensile test and Elongation test are Rs. 800/-.
8.1(Mechanical Properties (as per table 5 of IS 1608))	-	0	Testing charges for Tensile test and Elongation test are Rs. 800/- already mentioned above.
8.2(Mechanical Properties (as per IS 1717))	-	600	Testing charges for Torsion test.
8.3(Mechanical Properties (as per IS 1755))	-	400	Testing charges for Wrapping test.
9.1(Galvanizing Requirements )	-	500	Testing charges for Mass of Zinc Coating.
9.2(Galvanizing Requirements )	-	400	Testing charges for Uniformity of Zinc Coating.
9.3(Galvanizing Requirements )	-	400	Testing charges for Adhesion test.
11(Freedom from defects)	-	400	-
14 (a)(Marking)	-	0	NA
14 (b)(Marking)	-	0	NA
14 (c)(Marking)	-	0	NA
14 (d)(Marking)	-	0	NA
14 (e)(Marking)	-	0	NA
14 (f)(Marking)	-	0	NA
14 (g)(Marking)	-	0	NA
14.2(Marking)	-	0	NA
7(Dimensions)	-	0	NA
7(Dimensions)	-	0	NA
7(Dimensions)	-	0	NA
7(Dimensions)	-	0	NA
7(Dimensions)	-	0	NA
8.4(Mechanical Properties (as per IS 10810(Part- 42)))	-	0	NA
14(Marking)	-	0	NA
14 (a)(Marking)	-	0	NA
14 (b)(Marking)	-	0	NA
14 (c)(Marking)	-	0	NA
14 (d)(Marking)	-	0	NA
14 (e)(Marking)	-	0	NA
14 (f)(Marking)	-	0	NA
14 (g)(Marking)	-	0	NA
14.2(Marking)	-	0	NA
7(Dimensions)	-	0	NA
7(Dimensions)	-	0	NA
7(Dimensions)	-	0	NA
7(Dimensions)	-	0	NA
7(Dimensions)	-	0	NA
7(Dimensions)	-	0	NA
7(Dimensions)	-	0	NA
11(Freedom from defects)	-	0	NA
9.1(Galvanizing Requirements )	-	0	NA
9.2(Galvanizing Requirements )	-	0	NA
9.3(Galvanizing Requirements )	-	0	NA
8.1(Mechanical Properties (as per table 5 of IS 1608))	-	0	NA
8.1(Mechanical Properties (as per table 5 of IS 1608))	-	0	NA
8.2(Mechanical Properties (as per IS 1717))	-	0	NA
8.3(Mechanical Properties (as per IS 1755))	-	0	NA
Clause 6.1, Table-1(Sulphur)	-	0	NA
Clause 6.1, Table-1(Phosphorus)	-	0	NA
6.2( Nitrogen%)	-	0	NA
6.2(Phosphorus %)	-	0	NA
6.2(Sulphur %)	-	0	NA
6.2( Nitrogen%)	-	0	NA
6.2(Phosphorus %)	-	0	NA
6.2(Sulphur %)	-	0	NA
6.2( Nitrogen%)	-	0	NA

31 Dec, 2029

-
Included w.e.f.21.11.2024 Exclusion CL 8.4 Resistance test (for rand & formed wires)

10192

CIPET, Lucknow

9102534

IS 14252 (2015)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sack for filling sand – Specification (second revision)

18853 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Raw Material)	-	1050	-
3.2(Tapes – Width )	-	500	-
3.2(Tapes – Linear Density )	-	700	-
3.3(Tying Cord)	-	500	-
3.3(Tying Cord)	-	500	-
3.3(Tying Cord)	-	500	-
3.4(Sack)	-	500	-
3.4.1(Seam)	-	500	-
3.4.1(Seam)	-	500	-
3.4.1(Seam)	-	500	-
3.4.1(Seam)	-	500	-
4.1 and Table 1 i a(Dimensions Outside Length)	-	500	-
4.1 and Table 1 i b(Dimensions Outside Width)	-	500	-
4.1 and Table 1 ii(Ends per dm )	-	500	-
4.1 and Table 1 iii(Picks per dm )	-	500	-
4.2 and Table 1 iv(Mass of sack )	-	500	-
4.1 and Table 1 v a(Average breaking strength of fabric Warpway )	-	1100	-
4.1 and Table 1 v b(Average breaking strength of fabric Weftway )	-	1100	-
4.1 and Table 1 vi(Average Breaking strength of bottom seam )	-	1100	-
4.1 and Table 1 vii a(Elongation at break of fabric Lengthwise)	-	0	-
4.1 and Table 1 vii b(Elongation at break of fabric Widthwise )	-	0	-
4.1 and Table 1 viii(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	1100	-
4.1 and Table 1 ix(Ash content )	-	1200	-
3.1(Raw Material)	-	1050	-
3.2(Tapes – Width )	-	500	-
3.2(Tapes – Linear Density )	-	700	-
3.3(Tying Cord)	-	500	-
3.3(Tying Cord)	-	500	-
3.3(Tying Cord)	-	500	-
3.4(Sack)	-	500	-
3.4.1(Seam)	-	500	-
3.4.1(Seam)	-	500	-
3.4.1(Seam)	-	500	-
3.4.1(Seam)	-	500	-
4.1 and Table 1 i a(Dimensions Outside Length)	-	500	-
4.1 and Table 1 i b(Dimensions Outside Width)	-	500	-
4.1 and Table 1 ii(Ends per dm )	-	500	-
4.1 and Table 1 iii(Picks per dm )	-	500	-
4.2 and Table 1 iv(Mass of sack )	-	500	-
4.1 and Table 1 v a(Average breaking strength of fabric Warpway )	-	1100	-
4.1 and Table 1 v b(Average breaking strength of fabric Weftway )	-	1100	-
4.1 and Table 1 vi(Average Breaking strength of bottom seam )	-	1100	-
4.1 and Table 1 viii(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	1100	-
4.1 and Table 1 vii a(Elongation at break of fabric Lengthwise)	-	0	-
4.1 and Table 1 vii b(Elongation at break of fabric Widthwise )	-	0	-
4.1 and Table 1 ix(Ash content )	-	1200	-

31 Dec, 2026

-
Included w.e.f. 20.08.2024

10193

CIPET, Lucknow

9102534

IS 15225 (2002)

Chlorinated polyvinyl chloride compounds used for pipes and fittings - Specifications

14875 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Designation)	-	500	-
4.2.1(Data block 1)	-	500	-
4.2.2(Data block 2)	-	500	-
4.2.3, Table1(Data block 3)	-	500	-
4.2.4, table 2(Data block 4)	-	500	-
4.2.5, table 3(Data block 5)	-	500	-
4.2.6(Data block 6)	-	500	-
8.1.1(Resin k-value)	-	1100	-
8.1.2(Resin chlorine content)	-	4300	-
8.1.3(Form)	-	500	-
8.1.4(Compound chlorine content)	-	4300	-
8.1.5(Appearance)	-	500	-
8.2.1(Vicat softening temperature)	-	1725	1100+625
8.2.2(Charpy impact strength)	-	1725	1100+625
8.2.3(Tensile strength)	-	1925	1300+625
8.2.4(Tensile modulus)	-	1925	1300+625
8.3(Ash content)	-	1200	-

31 Dec, 2026

-
Included w.e.f. 20.08.2024

10194

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 617 (2024)

Aluminium and Aluminium Alloys Ingots for Remelting and Castings for General Engineering Purposes â Specification (Fourth Revision)

Aluminium and Aluminium Alloys Ingots.

17000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-6.1, Table-1(Si)	-	500	-
Cl-6.1, Table-1(Fe)	-	500	-
Cl-6.1, Table-1(Cu)	-	500	-
Cl-6.1, Table-1(Mn)	-	500	-
Cl-6.1, Table-1(Mg)	-	500	-
Cl-6.1, Table-1(Cr)	-	500	-
Cl-6.1, Table-1(Ni)	-	500	-
Cl-6.1, Table-1(Zn)	-	500	-
Cl-6.1, Table-1(Pb)	-	500	-
Cl-6.1, Table-1(Sn)	-	500	-
Cl-6.1, Table-1(Ti)	-	500	-
Cl-6.1, Table-1(Others elements Each)	-	1500	-
Cl-6.1, Table-1(Others elements Total)	-	1500	-
Cl-6.1, Table-1(Aluminium)	-	500	-
Cl-6.2(The chemical analysis)	-	13100	-
Cl-7.1, Table-2(Sand-Cast Alloys- Tensile Strength)	-	1000	-
Cl-7.1, Table-2(Sand-Cast Alloys- Proof Stress)	-	1000	-
Cl-7.1, Table-2(Sand-Cast Alloys- Elongation)	-	500	-
Cl-7.1, Table-2(Sand-Cast Alloys- Brinell Hardness HBW)	-	1000	-
Cl-7.1, Table-3(Chill Cast Alloys- Tensile Strength)	-	1000	-
Cl-7.1, Table-3(Chill Cast Alloys- Proof Stress)	-	1000	-
Cl-7.1, Table-3(Chill Cast Alloys- Elongation)	-	500	-
Cl-7.1, Table-3(Chill Cast Alloys- Brinell Hardness HBW)	-	1000	-
Cl-7.1, Table-4(Investment-Cast Alloys- Tensile Strength)	-	1000	-
Cl-7.1, Table-4(Investment-Cast Alloys- Proof Stress)	-	1000	-
Cl-7.1, Table-4(Investment-Cast Alloys- Elongation)	-	500	-
Cl-7.1, Table-4(Investment-Cast Alloys-Brinell Hardness)	-	1000	-
Cl-7.2(Tensile Tests)	-	1000	-
Cl-7.3(Test Pieces)	-	100	-
Cl-7.4(Hardness)	-	1000	-
Cl-8(Freedom from Defects)	-	100	-
Cl-11(RETEST)	-	100	-
Cl-13(Marking)	-	100	-
Cl. 6(Silicon)	-	500	-
Cl. 6(Iron)	-	500	-
Cl. 6(Copper)	-	500	-
Cl. 6(Manganese)	-	500	-
Cl. 6(Magnesium)	-	500	-
Cl. 6(Chromium)	-	500	-
Cl. 6(Nickel)	-	500	-
Cl. 6(Zinc)	-	500	-
Cl. 6(Lead)	-	500	-
Cl. 6(Tin)	-	500	-
Cl. 6(Titanium)	-	500	-
Cl. 6(Others Element Each)	-	1500	-
Cl. 6(Others Element Total)	-	1500	-
Cl. 6(Aluminium)	-	500	-
Cl. 6(Silver)	-	500	-
Cl. 6(Zirconium)	-	600	-
Cl. 6(Titanium+Zirconium)	-	1000	-
Cl. 6(Antimony)	-	500	-
Cl. 6(Cobalt)	-	500	-
Cl. 6(Antimony+Cobalt)	-	1000	-
Cl. 6(Beryllium)	-	500	-

31 Dec, 2029

-
Included w.e.f. 25.07.2024

10195

IDMA LABORATORIES LIMITED, PANCHKULA

9123236

IS 280 (2006)

Mild steel wire for general engineering purposes (Fourth Revision)

8400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	500	-
Cl 9(Tensile Test On UTM)	-	800	-
9.2(Wrapping Test)	-	500	-
9.3(Bend test)	-	500	-
Cl 11(Workmanship)	-	800	Testing charges for Mass of Zinc Coating
Cl 11(Workmanship)	-	500	Testing charges for Uniformity of Zinc Coating
11(Coating test)	-	500	Testing charges for Adhesion Test
Cl 13(Workmanship)	-	500	Testing charges for Freedom from defects
10(Finish)	-	300	-
6 AND AS PER IS 7887(ALUMINIUM)	-	500	-
6 AND AS PER IS 7887(PHOSPHORUS)	-	500	-
6 AND AS PER IS 7887(SULPHUR)	-	500	-
6 AND AS PER IS 7887(MANGANESE)	-	500	-
6 AND AS PER IS 7887(SILICON)	-	500	-
6 AND AS PER IS 7887(CARBON)	-	500	-
6 AND AS PER IS 7887(MICRO ALLOY)	-	500	Testing charges for Copper
Cl 13(Workmanship)	-	0	-
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	0	NA
Cl 9(Tensile Test On UTM)	-	0	NA
Cl 11(Workmanship)	-	0	NA
Cl 13(Workmanship)	-	0	NA
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	0	NA
Cl 9(Tensile Test On UTM)	-	0	NA
7 & 8(Ovality)	-	0	NA
7 & 8(Diameter)	-	0	NA
13(Freedom from defects)	-	0	NA
Cl 13(Workmanship)	-	0	NA
Cl 11(Workmanship)	-	0	NA
Cl 9(Tensile Test On UTM)	-	0	NA
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	0	NA
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	0	NA
Cl 9(Tensile Test On UTM)	-	0	NA
Cl 11(Workmanship)	-	0	NA
Cl 13(Workmanship)	-	0	NA
Clause 6 and Note 3 of IS 7887(Any Instrumental Method/Chemical Method)	-	0	NA
Clause 6 and Note 3 of IS 7887(Copper)	-	0	NA
14(Packing)	-	0	NA
15(Marking)	-	0	NA
Clause 6 and Note 3 of IS 7887(Copper)	-	0	NA

31 Dec, 2029

-
Included w.e.f.21.11.2024

10196

ENVIRONMENTAL LABORATORY (UNIT OF MINERAL ENGINEERING SERVICES LLP), BENGALURU

6130616

IS 14543 (2024)

Packaged Drinking Water Other than Packaged Natural Mineral Water Specification Third Revision

All grades and Sizes

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.3/Table 1/i(Colour)	-	50	Charges in Indian Rupees
5.3/Table 1/ii(Odour)	-	50	Charges in Indian Rupees
5.3/Table 1/iii(Taste)	-	50	Charges in Indian Rupees
5.3/Table 1/iv(Turbidity)	-	50	Charges in Indian Rupees
5.3/Table 1/v(Total Dissolved Solids)	-	50	Charges in Indian Rupees
5.3/Table 1/vi(pH)	-	50	Charges in Indian Rupees
5.3/Table 2/i(Barium)	-	100	Charges in Indian Rupees
5.3/Table 2/ii(Copper)	-	100	Charges in Indian Rupees
5.3/Table 2/iii(Iron)	-	100	Charges in Indian Rupees
5.3/Table 2/iv(Maganese)	-	100	Charges in Indian Rupees
5.3/Table 2/v(Nitrate)	-	50	Charges in Indian Rupees
5.3/Table 2/vi(Nitrite)	-	50	Charges in Indian Rupees
5.3/Table 2/vii(Fluoride)	-	100	Charges in Indian Rupees
5.3/Table 2/viii(Zinc)	-	100	Charges in Indian Rupees
5.3/Table 2/ix(Silver)	-	100	Charges in Indian Rupees
5.3/Table 2/x(Aluminium)	-	100	Charges in Indian Rupees
5.3/Table 2/xi(Chloride)	-	50	Charges in Indian Rupees
5.3/Table 2/xii(Selenium)	-	100	Charges in Indian Rupees
5.3/Table 2/xiii(Suphate)	-	50	Charges in Indian Rupees
5.3/Table 2/xiv(Alkalinity)	-	50	Charges in Indian Rupees
5.3/Table 2/xv(Calcium)	-	50	Charges in Indian Rupees
5.3/Table 2/xvi(Magnesium)	-	100	Charges in Indian Rupees
5.3/Table 2/xvii(Sodium)	-	100	Charges in Indian Rupees
5.3/Table 2/xviii(Residual Free Chlorine)	-	75	Charges in Indian Rupees
5.3/Table 2/xix(Phenolic Compounds)	-	100	Charges in Indian Rupees
5.3/Table 2/xx(Mineral Oil)	-	500	Charges in Indian Rupees
5.3/Table 2/xxi(Anionic Surface- Active Agents as MBAS)	-	100	Charges in Indian Rupees
5.3/Table 2/xxii(Sulphide)	-	50	Charges in Indian Rupees
5.3/Table 2/xxiii(Antinomy)	-	100	Charges in Indian Rupees
5.3/Table 2/xxiv(Borates)	-	100	Charges in Indian Rupees
5.3/Table 2/xxxv(Bromate)	-	1000	Charges in Indian Rupees
5.3/Table 3/i(Mercury)	-	200	Charges in Indian Rupees
5.3/Table 3/ii(Cadmium)	-	100	Charges in Indian Rupees
5.3/Table 3/iii(Arsenic)	-	100	Charges in Indian Rupees
5.3/Table 3/iv(Cyanide)	-	100	Charges in Indian Rupees
5.3/Table 3/v(Lead)	-	100	Charges in Indian Rupees
5.3/Table 3/vi(Chromium)	-	100	Charges in Indian Rupees
5.3/Table 3/vii(Nickel)	-	100	Charges in Indian Rupees
5.3/Table 3/viii(Polyclorinated biphenyl (PCB))	-	1000	Charges in Indian Rupees
5.3/Table 3/ix(Polynuclear Aromatic Hydrocarbons)	-	1000	Charges in Indian Rupees
5.3/Table 3/x(Uranium)	-	1000	Charges in Indian Rupees
5.4/Annex D/i(P,P-DDT)	-	111	Charges in Indian Rupees
5.4/Annex D/ii(Lindane)	-	111	Charges in Indian Rupees
5.4/Annex D/iv(b-Endosulfan)	-	111	Charges in Indian Rupees
5.4/Annex D/xvi(Dieldrin)	-	111	Charges in Indian Rupees
5.4/Annex D/xvi(Aldrin)	-	111	Charges in Indian Rupees
5.4/Annex D/i(O,P-DDT)	-	111	Charges in Indian Rupees
5.4/Annex D/iv(a-Endosulfan)	-	111	Charges in Indian Rupees
5.4/Annex D/iii(d-HCH)	-	111	Charges in Indian Rupees
5.4/Annex D/i(O,P-DDD)	-	111	Charges in Indian Rupees
5.4/Annex D/i(P,P-DDE)	-	111	Charges in Indian Rupees
5.4/Annex D/i(O,P-DDE)	-	111	Charges in Indian Rupees
5.4/Annex D/iii(a-HCH)	-	111	Charges in Indian Rupees
5.4/Annex D/iii(β- HCH)	-	111	Charges in Indian Rupees
5.4/Annex D/iv(Endosulfan sulfate)	-	111	Charges in Indian Rupees
5.4/Annex D/i(P,P-DDD)	-	111	Charges in Indian Rupees
5.4/Annex D/xii(Alachlor)	-	111	Charges in Indian Rupees
5.4/Annex D/vii(Chlorpyrifos)	-	111	Charges in Indian Rupees
5.4/Annex D/x(Butachlor)	-	111	Charges in Indian Rupees
5.4/Annex D/vi(Ethion)	-	111	Charges in Indian Rupees
5.4/Annex D/xiv(Methyl parathion)	-	111	Charges in Indian Rupees
5.4/Annex D/xv(Malathion)	-	111	Charges in Indian Rupees
5.4/Annex D/viii(Phorate)	-	111	Charges in Indian Rupees
5.4/Annex D/v(Monochrotophos)	-	111	Charges in Indian Rupees
5.4/Annex D/xiii(Atrazine)	-	111	Charges in Indian Rupees
5.4/Annex D/viii(Phorate sulphoxide)	-	111	Charges in Indian Rupees
5.4/Annex D/xxvii(Methyl paraoxon)	-	111	Charges in Indian Rupees
5.4/Annex D/xxviii(Malaoxon)	-	111	Charges in Indian Rupees
5.4/Annex D/xi(Isoproturon)	-	111	Charges in Indian Rupees
5.4/Annex D/ix(2,4 –D)	-	111	Charges in Indian Rupees
5.4/Annex D/xxxi(Total Pesticide Residue)	-	100	Charges in Indian Rupees
5.2.1(Escherichia Coli)	-	250	Charges in Indian Rupees
5.2.2(Coliform)	-	250	Charges in Indian Rupees
5.2.3(Faecal Streptococci & Staphylococcus aureus)	-	500	Charges in Indian Rupees
5.2.4(Sulphite Reducing Anaerobes)	-	250	Charges in Indian Rupees
5.2.5(Pseudomonas aeruginosa)	-	250	Charges in Indian Rupees
5.2.6(Aerobic Microbial Count @ 22 o C & 37o C)	-	750	Charges in Indian Rupees
5.2.7(Yeast & Mould)	-	300	Charges in Indian Rupees
5.2.8(Salmonella & Shigella)	-	500	Charges in Indian Rupees
5.2.9(Vibrio Cholera & Vibrio parahaemolyicus)	-	500	Charges in Indian Rupees
5.3(Appearance)	-	50	Charges in Indian Rupees
Cl-5.1(General Requirements)	-	50	Charges in Indian Rupees
Cl-5.2.1(Escherichia coli or thermotolerant bacteria)	-	250	Charges in Indian Rupees
Cl-5.2.2(Coliform)	-	250	Charges in Indian Rupees
Cl-5.2.3(Staphylococcus aureus)	-	250	Charges in Indian Rupees
Cl-5.2.4(Sulphite Reducing Anaerobes)	-	250	Charges in Indian Rupees
Cl-5.2.5(Pseudomonas Aeruginosa)	-	250	Charges in Indian Rupees
Cl-5.2.6(Aerobic Microbial Count @ 37 deg C)	-	750	Charges in Indian Rupees
Cl-5.2.7(Yeast and mould)	-	300	Charges in Indian Rupees
Cl-5.2.8(Salmonella)	-	250	Charges in Indian Rupees
Cl-5.2.9(Vibrio cholera)	-	250	Charges in Indian Rupees
Cl-5.3, Table-1 (i)(Colour, true colour units, Max)	-	50	Charges in Indian Rupees
Cl-5.3, Table-1 (ii)(Odour)	-	50	Charges in Indian Rupees
Cl-5.3, Table-1 (iii)(Taste)	-	50	Charges in Indian Rupees
Cl-5.3, Table-1 (iv)(Turbidity, nephelometric turbidity unit (NTU), Max)	-	50	Charges in Indian Rupees
Cl-5.3, Table-1 (v)(Total dissolved solids, mg/l, Max)	-	50	Charges in Indian Rupees
Cl-5.3, Table-1 (vi)(pH)	-	50	Charges in Indian Rupees
Cl-5.3, Table-2 (i)(Barium (as Ba))	-	100	Charges in Indian Rupees
Cl-5.3, Table-2 (ii)(Copper (as Cu))	-	100	Charges in Indian Rupees
Cl-5.3, Table-2 (iii)(Iron (as Fe))	-	100	Charges in Indian Rupees
Cl-5.3, Table-2 (iv)(Manganese (as Mn))	-	100	Charges in Indian Rupees
Cl-5.3, Table-2 (v)(Nitrate (as NO3 ))	-	50	Charges in Indian Rupees
Cl-5.3, Table-2 (vi)(Nitrite (as NO2 ))	-	50	Charges in Indian Rupees
Cl-5.3, Table-2 (vii)(Fluoride (as F))	-	100	Charges in Indian Rupees
Cl-5.3, Table-2 (viii)(Zinc (as Zn))	-	100	Charges in Indian Rupees
Cl-5.3, Table-2 (ix)(Silver (as Ag))	-	100	Charges in Indian Rupees
Cl-5.3, Table-2 (x)(Aluminium (as A1))	-	100	Charges in Indian Rupees
Cl-5.3, Table-2 (xi)(Chloride (as Cl))	-	50	Charges in Indian Rupees
Cl-5.3, Table-2 (xii)(Selenium (as Se))	-	100	Charges in Indian Rupees
Cl-5.3, Table-2 (xiii)(Sulphate (as SO4 ))	-	50	Charges in Indian Rupees
Cl-5.3, Table-2 (xiv)(Alkalinity (as HCO3 ))	-	50	Charges in Indian Rupees
Cl-5.3, Table-2 (xv)(Calcium (as Ca))	-	50	Charges in Indian Rupees
Cl-5.3, Table-2 (xvi)(Magnesium (as Mg))	-	50	Charges in Indian Rupees
Cl-5.3, Table-2 (xvii)(Sodium (as Na))	-	100	Charges in Indian Rupees
Cl-5.3, Table-2 (xviii)(Residual free chlorine)	-	75	Charges in Indian Rupees
Cl-5.3, Table-2 (xix)(Phenolic compounds (as C6H5OH))	-	100	Charges in Indian Rupees
Cl-5.3, Table-2 (xx)(Mineral oil)	-	500	Charges in Indian Rupees
Cl-5.3, Table-2 (xxi)(Anionic surface active agents)	-	100	Charges in Indian Rupees
Cl-5.3, Table-2 (xxii)(Sulphide)	-	50	Charges in Indian Rupees
Cl-5.3, Table-2 (xxiii)(Antimony (as Sb))	-	100	Charges in Indian Rupees
Cl-5.3, Table-2 (xxiv)(Borates (as B))	-	100	Charges in Indian Rupees
Cl-5.3, Table-2 (xxv)(Bromates (as BrO3 ))	-	1000	Charges in Indian Rupees
Cl-5.3, Table-3 (i)(Mercury (as Hg))	-	200	Charges in Indian Rupees
Cl-5.3, Table-3 (ii)(Cadmium (as Cd))	-	100	Charges in Indian Rupees
Cl-5.3, Table-3 (iii)(Arsenic (as As))	-	100	Charges in Indian Rupees
Cl-5.3, Table-3 (iv)(Cyanide (as CN))	-	100	Charges in Indian Rupees
Cl-5.3, Table-3 (v)(Lead (as Pb))	-	100	Charges in Indian Rupees
Cl-5.3, Table-3 (vi)(Chromium (as Cr))	-	100	Charges in Indian Rupees
Cl-5.3, Table-3 (vii)(Nickel (as Ni))	-	100	Charges in Indian Rupees
Cl-5.3, Table-3 (viii)(Polychlorinated biphenyl (PCB))	-	1000	Charges in Indian Rupees
Cl-5.3, Table-3 (ix)(Polynuclear aromatic hydrocarbons)	-	1000	Charges in Indian Rupees
Cl-5.3, Table-3 (x)(Uranium)	-	1000	Charges in Indian Rupees
Cl-5.4 (i)(Pesticide residues considered individually)	-	111	Charges in Indian Rupees
Cl-5.4 (ii)(Total pesticide residue)	-	100	Charges in Indian Rupees
5.4/Annex D/viii(Phorate sulfone)	-	111	Charges in Indian Rupees
5.3/Table 1/i(Colour)	-	50	Charges in Indian Rupees
5.3/Table 1/ii(Odour)	-	50	Charges in Indian Rupees
5.3/Table 1/iii(Taste)	-	50	Charges in Indian Rupees
5.3/Table 1/iv(Turbidity)	-	50	Charges in Indian Rupees
5.3/Table 1/v(Total Dissolved Solids)	-	50	Charges in Indian Rupees
5.3/Table 1/vi(pH)	-	50	Charges in Indian Rupees
5.3/Table 2/i(Barium)	-	100	Charges in Indian Rupees
5.3/Table 2/ii(Copper)	-	100	Charges in Indian Rupees
5.3/Table 2/iii(Iron)	-	100	Charges in Indian Rupees
5.3/Table 2/iv(Maganese)	-	100	Charges in Indian Rupees
5.3/Table 2/v(Nitrate)	-	50	Charges in Indian Rupees
5.3/Table 2/vi(Nitrite)	-	50	Charges in Indian Rupees
5.3/Table 2/vii(Fluoride)	-	100	Charges in Indian Rupees
5.3/Table 2/viii(Zinc)	-	100	Charges in Indian Rupees
5.3/Table 2/ix(Silver)	-	100	Charges in Indian Rupees
5.3/Table 2/x(Aluminium)	-	100	Charges in Indian Rupees
5.3/Table 2/xi(Chloride)	-	50	Charges in Indian Rupees
5.3/Table 2/xii(Selenium)	-	100	Charges in Indian Rupees
5.3/Table 2/xiii(Suphate)	-	50	Charges in Indian Rupees
5.3/Table 2/xiv(Alkalinity)	-	50	Charges in Indian Rupees
5.3/Table 2/xv(Calcium)	-	50	Charges in Indian Rupees
5.3/Table 2/xvi(Magnesium)	-	100	Charges in Indian Rupees
5.3/Table 2/xvii(Sodium)	-	100	Charges in Indian Rupees
5.3/Table 2/xviii(Residual Free Chlorine)	-	75	Charges in Indian Rupees
5.3/Table 2/xix(Phenolic Compounds)	-	100	Charges in Indian Rupees
5.3/Table 2/xx(Mineral Oil)	-	500	Charges in Indian Rupees
5.3/Table 2/xxi(Anionic Surface- Active Agents as MBAS)	-	100	Charges in Indian Rupees
5.3/Table 2/xxii(Sulphide)	-	50	Charges in Indian Rupees
5.3/Table 2/xxiii(Antinomy)	-	100	Charges in Indian Rupees
5.3/Table 2/xxiv(Borates)	-	100	Charges in Indian Rupees
5.3/Table 2/xxxv(Bromate)	-	1000	Charges in Indian Rupees
5.3/Table 3/i(Mercury)	-	200	Charges in Indian Rupees
5.3/Table 3/ii(Cadmium)	-	100	Charges in Indian Rupees
5.3/Table 3/iii(Arsenic)	-	100	Charges in Indian Rupees
5.3/Table 3/iv(Cyanide)	-	100	Charges in Indian Rupees
5.3/Table 3/v(Lead)	-	100	Charges in Indian Rupees
5.3/Table 3/vi(Chromium)	-	100	Charges in Indian Rupees
5.3/Table 3/vii(Nickel)	-	100	Charges in Indian Rupees
5.3/Table 3/viii(Polyclorinated biphenyl (PCB))	-	1000	Charges in Indian Rupees
5.3/Table 3/ix(Polynuclear Aromatic Hydrocarbons)	-	1000	Charges in Indian Rupees
5.3/Table 3/x(Uranium)	-	1000	Charges in Indian Rupees
5.4/Annex D/i(P,P-DDT)	-	111	Charges in Indian Rupees
5.4/Annex D/ii(Lindane)	-	111	Charges in Indian Rupees
5.4/Annex D/iv(b-Endosulfan)	-	111	Charges in Indian Rupees
5.4/Annex D/xvi(Dieldrin)	-	111	Charges in Indian Rupees
5.4/Annex D/xvi(Aldrin)	-	111	Charges in Indian Rupees
5.4/Annex D/i(O,P-DDT)	-	111	Charges in Indian Rupees
5.4/Annex D/iv(a-Endosulfan)	-	111	Charges in Indian Rupees
5.4/Annex D/iii(d-HCH)	-	111	Charges in Indian Rupees
5.4/Annex D/i(O,P-DDD)	-	111	Charges in Indian Rupees
5.4/Annex D/i(P,P-DDE)	-	111	Charges in Indian Rupees
5.4/Annex D/i(O,P-DDE)	-	111	Charges in Indian Rupees
5.4/Annex D/iii(a-HCH)	-	111	Charges in Indian Rupees
5.4/Annex D/iii(β- HCH)	-	111	Charges in Indian Rupees
5.4/Annex D/iv(Endosulfan sulfate)	-	111	Charges in Indian Rupees
5.4/Annex D/i(P,P-DDD)	-	111	Charges in Indian Rupees
5.4/Annex D/xii(Alachlor)	-	111	Charges in Indian Rupees
5.4/Annex D/vii(Chlorpyrifos)	-	111	Charges in Indian Rupees
5.4/Annex D/x(Butachlor)	-	111	Charges in Indian Rupees
5.4/Annex D/vi(Ethion)	-	111	Charges in Indian Rupees
5.4/Annex D/xiv(Methyl parathion)	-	111	Charges in Indian Rupees
5.4/Annex D/xv(Malathion)	-	111	Charges in Indian Rupees
5.4/Annex D/viii(Phorate)	-	111	Charges in Indian Rupees
5.4/Annex D/v(Monochrotophos)	-	111	Charges in Indian Rupees
5.4/Annex D/xiii(Atrazine)	-	111	Charges in Indian Rupees
5.4/Annex D/viii(Phorate sulphoxide)	-	111	Charges in Indian Rupees
5.4/Annex D/xxvii(Methyl paraoxon)	-	111	Charges in Indian Rupees
5.4/Annex D/xxviii(Malaoxon)	-	111	Charges in Indian Rupees
5.4/Annex D/xi(Isoproturon)	-	111	Charges in Indian Rupees
5.4/Annex D/ix(2,4 –D)	-	111	Charges in Indian Rupees
5.4/Annex D/xxxi(Total Pesticide Residue)	-	100	Charges in Indian Rupees
5.2.1(Escherichia Coli)	-	250	Charges in Indian Rupees
5.2.2(Coliform)	-	250	Charges in Indian Rupees
5.2.4(Sulphite Reducing Anaerobes)	-	250	Charges in Indian Rupees
5.2.5(Pseudomonas aeruginosa)	-	250	Charges in Indian Rupees
5.2.6(Aerobic Microbial Count @ 22 o C & 37o C)	-	750	Charges in Indian Rupees
5.2.7(Yeast & Mould)	-	300	Charges in Indian Rupees
5.3(Appearance)	-	50	Charges in Indian Rupees
Cl-5.1(General Requirements)	-	50	Charges in Indian Rupees
Cl-5.2.1(Escherichia coli or thermotolerant bacteria)	-	250	Charges in Indian Rupees
Cl-5.2.2(Coliform)	-	250	Charges in Indian Rupees
Cl-5.2.4(Sulphite Reducing Anaerobes)	-	250	Charges in Indian Rupees
Cl-5.2.5(Pseudomonas Aeruginosa)	-	250	Charges in Indian Rupees
Cl-5.2.6(Aerobic Microbial Count @ 37 deg C)	-	250	Charges in Indian Rupees
Cl-5.2.7(Yeast and mould)	-	300	Charges in Indian Rupees
Cl-5.3, Table-1 (i)(Colour, true colour units, Max)	-	50	Charges in Indian Rupees
Cl-5.3, Table-1 (ii)(Odour)	-	50	Charges in Indian Rupees
Cl-5.3, Table-1 (iii)(Taste)	-	50	Charges in Indian Rupees
Cl-5.3, Table-1 (iv)(Turbidity, nephelometric turbidity unit (NTU), Max)	-	50	Charges in Indian Rupees
Cl-5.3, Table-1 (v)(Total dissolved solids, mg/l, Max)	-	50	Charges in Indian Rupees
Cl-5.3, Table-1 (vi)(pH)	-	50	Charges in Indian Rupees
Cl-5.3, Table-2 (i)(Barium (as Ba))	-	100	Charges in Indian Rupees
Cl-5.3, Table-2 (ii)(Copper (as Cu))	-	100	Charges in Indian Rupees
Cl-5.3, Table-2 (iii)(Iron (as Fe))	-	100	Charges in Indian Rupees
Cl-5.3, Table-2 (iv)(Manganese (as Mn))	-	100	Charges in Indian Rupees
Cl-5.3, Table-2 (v)(Nitrate (as NO3 ))	-	50	Charges in Indian Rupees
Cl-5.3, Table-2 (vi)(Nitrite (as NO2 ))	-	50	Charges in Indian Rupees
Cl-5.3, Table-2 (vii)(Fluoride (as F))	-	100	Charges in Indian Rupees
Cl-5.3, Table-2 (viii)(Zinc (as Zn))	-	100	Charges in Indian Rupees
Cl-5.3, Table-2 (ix)(Silver (as Ag))	-	100	Charges in Indian Rupees
Cl-5.3, Table-2 (x)(Aluminium (as A1))	-	100	Charges in Indian Rupees
Cl-5.3, Table-2 (xi)(Chloride (as Cl))	-	50	Charges in Indian Rupees
Cl-5.3, Table-2 (xii)(Selenium (as Se))	-	100	Charges in Indian Rupees
Cl-5.3, Table-2 (xiii)(Sulphate (as SO4 ))	-	50	Charges in Indian Rupees
Cl-5.3, Table-2 (xiv)(Alkalinity (as HCO3 ))	-	50	Charges in Indian Rupees
Cl-5.3, Table-2 (xv)(Calcium (as Ca))	-	50	Charges in Indian Rupees
Cl-5.3, Table-2 (xvi)(Magnesium (as Mg))	-	100	Charges in Indian Rupees
Cl-5.3, Table-2 (xvii)(Sodium (as Na))	-	100	Charges in Indian Rupees
Cl-5.3, Table-2 (xviii)(Residual free chlorine)	-	75	Charges in Indian Rupees
Cl-5.3, Table-2 (xix)(Phenolic compounds (as C6H5OH))	-	100	Charges in Indian Rupees
Cl-5.3, Table-2 (xx)(Mineral oil)	-	500	Charges in Indian Rupees
Cl-5.3, Table-2 (xxi)(Anionic surface active agents)	-	100	Charges in Indian Rupees
Cl-5.3, Table-2 (xxii)(Sulphide)	-	50	Charges in Indian Rupees
Cl-5.3, Table-2 (xxiii)(Antimony (as Sb))	-	100	Charges in Indian Rupees
Cl-5.3, Table-2 (xxiv)(Borates (as B))	-	100	Charges in Indian Rupees
Cl-5.3, Table-2 (xxv)(Bromates (as BrO3 ))	-	1000	Charges in Indian Rupees
Cl-5.3, Table-3 (i)(Mercury (as Hg))	-	200	Charges in Indian Rupees
Cl-5.3, Table-3 (ii)(Cadmium (as Cd))	-	100	Charges in Indian Rupees
Cl-5.3, Table-3 (iii)(Arsenic (as As))	-	100	Charges in Indian Rupees
Cl-5.3, Table-3 (iv)(Cyanide (as CN))	-	100	Charges in Indian Rupees
Cl-5.3, Table-3 (v)(Lead (as Pb))	-	100	Charges in Indian Rupees
Cl-5.3, Table-3 (vi)(Chromium (as Cr))	-	100	Charges in Indian Rupees
Cl-5.3, Table-3 (vii)(Nickel (as Ni))	-	100	Charges in Indian Rupees
Cl-5.3, Table-3 (viii)(Polychlorinated biphenyl (PCB))	-	1000	Charges in Indian Rupees
Cl-5.3, Table-3 (ix)(Polynuclear aromatic hydrocarbons)	-	1000	Charges in Indian Rupees
Cl-5.3, Table-3 (x)(Uranium)	-	1000	Charges in Indian Rupees
Cl-5.4 (i)(Pesticide residues considered individually)	-	111	Charges in Indian Rupees
Cl-5.4 (ii)(Total pesticide residue)	-	100	Charges in Indian Rupees
5.4/Annex D/viii(Phorate sulfone)	-	111	Charges in Indian Rupees
5.2.3(Faecal Streptococci & Staphylococcus aureus)	-	500	Charges in Indian Rupees
5.2.8(Salmonella & Shigella)	-	500	Charges in Indian Rupees
5.2.9(Vibrio Cholera & Vibrio parahaemolyicus)	-	500	Charges in Indian Rupees
Cl-5.2.3(Staphylococcus aureus)	-	250	Charges in Indian Rupees
Cl-5.2.3(Faecal streptococci)	-	250	Charges in Indian Rupees
Cl-5.2.8(shigella)	-	250	Charges in Indian Rupees
Cl-5.2.8(Salmonella)	-	250	Charges in Indian Rupees
Cl-5.2.9(V.parahaemolyticus)	-	250	Charges in Indian Rupees
Cl-5.2.9(Vibrio cholera)	-	250	Charges in Indian Rupees

20 Apr, 2027

-
Included w.e.f. 24.09.2024 Exclusion: Cl.5.3 Table-4 (i) Alpha Emitters, Cl.5.3 Table-4 (ii) (Beta Emitters)

10197

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 1545 (1994)

Solid drawn coppbr and copper alloy tubes for condensers and heat exchangers - Specification (Third Revision)

Solid Drawn copper and copper alloy tubes

19800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. No.5(GRADES)	-	7100	-
Cl. No.6(CONDITION)	-	100	-
Cl. No.7(FREEDOM FROM DEFECTS)	-	100	-
Cl. No.8.1(Dimensions)	-	1000	-
Cl. No.8.2(Tolerances)	-	200	-
Cl. No.9.1, Table no.1(i)(Chemical composition-Copper)	-	500	-
Cl. No.9.1, Table no.1(ii)(Lead)	-	1000	-
Cl. No.9.1, Table no.1(iii)(Tin)	-	100	-
Cl. No.9.1, Table no.1(iv)(Iron)	-	1000	-
Cl. No.9.1, Table no.1(v)(Aluminium)	-	100	-
Cl. No.9.1, Table no.1(vi)(Mangenese)	-	1000	-
Cl. No.9.1, Table no.1(vi)(Arsenic)	-	100	-
Cl. No.9.1, Table no.1(vii)(Nickle)	-	1000	-
Cl. No.9.1, Table no.1(iv)(Zinc)	-	1000	-
Cl. No.9.1, Table no.1(iv)(Phosphorus)	-	300	-
Cl. No.9.1, Table no.1(iv)(T.L)	-	1000	-
Cl. No.10.1.1(Hardness test)	-	1800	-
Cl. No.10.1.2(Tensile Test)	-	3400	-
Cl. No.10.2, Table no.2(Flattening Test)	-	1500	-
Cl. No.10.3(Drift Expanding Test)	-	1800	-
Cl. No.10.4.1(Eddy-Current Test)	-	200	-
Cl. No.10.4.2(Hydrostatic Test)	-	200	-
Cl. No.10.4.3(Pneumatic Test ( Alternative to Hydrostatic Test)	-	200	-
Cl. No.10.5(Microscopic Examination)	-	1000	-
Cl. No.10.6.1(Ammonia Vapour Cracking Test)	-	100	-
Cl. No.10.6.2(Mercurous Nitrate Test)	-	1000	-
Cl. No.13(Marking)	-	100	-

31 Dec, 2029

-
Included w.e.f. 12.04.2024

10198

UNITECH LABORATORIES SERVICES

7196806

IS 617 (1994)

Cast aluminium and its alloys - Ingots and castings for general engineering purposes - Specification (Third Revision)

CAST ALUMINIUM AND ITS ALLOYS

1350 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.2(Hardness)	-	100	-
6, Table 2.(MECHANICAL PROPERTIES OF CASTINGS)	-	250	Machining Extra
5, Table 1.(Chemical Composition)	-	1000	1000/GRADE
Table-1, Clause - 5.1(Copper)	-	80	-
Table-1, Clause - 5.1(Iron)	-	80	-
Table-1, Clause - 5.1(Magnesium)	-	80	-
Table-1, Clause - 5.1(Manganese)	-	80	-
Table-1, Clause - 5.1(Tin)	-	80	-
Table-1, Clause - 5.1(Silicon)	-	80	-
Table-1, Clause - 5.1(Nickel)	-	80	-
Table-1, Clause - 5.1(Zinc)	-	80	-
Table-1, Clause - 5.1(Other elements (each))	-	80	-
Table-1, Clause - 5.1(Other elements (Total))	-	80	-
Table-1, Clause - 5.1(Aluminium)	-	80	-
Table-1, Clause - 5.1(Titanium)	-	80	-
Table-1, Clause - 5.1(Lead)	-	80	-
Cl. 5(Copper)	-	80	-
Cl. 5(Silicon)	-	80	-
Cl. 5(Magnesium)	-	80	-
Cl. 5(Manganese)	-	80	-
Cl. 5(Iron)	-	80	-
Cl. 5(Nickel)	-	80	-
Cl. 5(Zinc)	-	80	-
Cl. 5(Lead)	-	80	-
Cl. 5(Tin)	-	80	-
Cl. 5(Titanium)	-	80	-
Cl. 5(Aluminium)	-	80	-
Cl. 5(Chromium)	-	80	-
Cl. 5(Titanium)	-	80	-
Cl. 5(Other Element each)	-	80	-
Cl. 5(Other Element Total)	-	80	-
Cl. 5(Bismuth)	-	80	-

18 Feb, 2029

-
Dye penetrant test (Optional test) Radiography Test (Optional Test) Pressure Test (Optional test)

10199

BIS, Bengaluru Branch Laboratory (BNBL)

None

IS 17790 (2022)

INSULATED FLASK FOR DOMESTIC USE SPECIFICATION

5531 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.0 (Manufacture and Workmanship)	-
7.2 (Capacity)	-
7.3 (Heat Retention Capability)	-
7.4 (Cold Retention Capability)	-
7.5.1 (Drop Impact Test)	-
7.5.2 (Pendulum Impact Test)	-
7.6 (Fixing Strength of the Handle)	-
7.7 (Test for Strength of Shoulder Strap)	-
7.8 (Test for strength of cord)	-
7.9 (Leakage Test)	-
7.10 (Joint Leak Test)	-
7.11 (Staining Test)	-
7.15 (Test for length of the shoulder cap)	-
7.16 (Stability of Flask)	-
7.17 (Pour Test)	-

-
Excluding Clause 7.1 (Materials), Clause 7.12 (Check the thermal insulation material), Clause 7.13 (Seepage test).

10200

CIPET, Lucknow

9102534

IS 16703 (2017)

Textiles - High density polyethylene (HDPE) polypropylene (PP) woven sacks for packaging of 25 kg polymer materials - Specification

31717.5 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Mass of Bale)	-	500	-
5.2 Table 1(Dimensions)	-	500	-
5.2 Table 1(Dimensions)	-	500	-
5.2 Table 1(Dimensions)	-	500	-
5.2 Table 1(Dimensions)	-	500	-
5.2 Table 1(Ends per dm)	-	500	-
5.2 Table 1(Picks per dm)	-	500	-
5.2 Table 1(Mass of sack, Gusseted type, g - IS 1964)	-	500	-
5.2 Table 1(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70mm1)] Min, N) (kgf): - IS 1969 (Part 1))	-	1100	-
5.2 Table 1(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70mm1)] Min, N2) (kgf): - IS 1969 (Part 1))	-	1100	-
5.2 Table 1(Breaking strength of bottom seam (Ravelled strip method), Min, N) (kgf) - IS 9030)	-	1100	-
5.2 Table 1(Elongation at break of fabric (Ravelled strip method), percent : IS 1969 (Part 1))	-	0	-
5.2 Table 1(Elongation at break of fabric (Ravelled strip method), percent : IS 1969 (Part 1))	-	0	-
5.2 Table 1(Drop impact strength)	-	1600	1100+500
(Clauses 4.2, 5.1, 5.2, 5.3 and 5.4) Table 1 (Ash Content ,a) For UV stabilized sacks)	-	1200	-
(Clauses 4.2, 5.1, 5.2, 5.3 and 5.4) Table 1 (Ash Content ,b) For non- UV stabilized sacks)	-	1200	-
4.6(Capacity)	-	500	-
4.3.1(Bottom Seam)	-	500	-
4.3(Sacks)	-	500	-
4.2,5.1,5.2,5.3,5.4(Breaking strenght after U.V. Exposure (Warp/Weft))	-	1100	-
4.2,5.1,5.2,5.3,5.4,(UV Resistance (192 hrs)(100 x 65+92x40))	-	10180	-
4.2(Linear Density)	-	700	-
4.2(Width of tape)	-	500	-
4.6(Capacity)	-	500	-
4.3.1(Bottom Seam)	-	500	-
4.3(Sacks)	-	500	-
4.2,5.1,5.2,5.3,5.4(Breaking strenght after U.V. Exposure (Warp/Weft))	-	2200	-
4.2,5.1,5.2,5.3,5.4,(UV Resistance (192 hrs)(100 x 65+92x40))	-	10180	-
4.2(Linear Density)	-	700	-
4.2(Width of tape)	-	500	-

31 Dec, 2026

-
Included w.e.f. 20.08.2024

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number