BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

14027 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

10201

ARDM Labs Pvt Ltd

8175706

IS 13488 (2008)

Irrigation equipment - Emitting pipe systems - Specification (First Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.2 (Ref. Cl 4.1.c.iii of IS 12786 : 1989)(Volatile matter - Annex B of IS 12786:1989)	-	1500	-
5.1.2 (Ref. Cl 4.1.c & 4.2.a of IS 12786 : 1989)(Carbon Black content - IS 2530 : 1963)	-	1500	-
5.1.2 (Ref. Cl 4.1.b of IS 12786 : 1989)(Potyethylene - anti-oxidant)	-	1500	-
5.1.2 (Ref. Cl 4.2.b of IS 12786 : 1989)(The dispersion of Carbon Black content shall be satisfactory - IS 2530 : 1963)	-	1500	-
6.2.2(Fittings)	-	0	-
8.1.2(Uniformity of Emission Rate for Unregulated Emitting Pipes)	-	1000	-
8.1.3(Uniformity of Emission Rate for Regulated Emitting Pipes)	-	1000	-
8.2(Emission Rate of Emitting Unit as a Function of Inlet Pressure)	-	1500	-
8.3.1(Wall Thickness ofEmitting Pipe)	-	500	-
8.3.2(Inside Diameter ofEmitting Pipe)	-	500	-
8.3.3(Flow Paths in Emitting Unit)	-	500	-
8.3.4(Spacing ofEmitter Units)	-	500	-
8.4.1(Resistance to Hydrostatic Pressure at Ambient Temperature)	-	4000	-
8.4.2(Resistance to Hydrostatic Pressure at Elevated Temperature)	-	4000	-
8.6(Resistance to Pull Out of Joints Between Fitting and Emitting IS 13479)	-	1200	-
8.8(Determination of Emitting Unit Exponent)	-	1000	-
9.1(DESIGNATION - Non regulated Emitting Pipe)	-	250	-
9.2(DESIGNATION - Regulated Emitting Pipe)	-	0	-
5.1(Materials - shall be resistant to fertilizers and chemicals commonly employed in irrigation, and shall be suitable for use with water at temperatures up to 60°C and at pressures designed for the emitting pipe)	-	1000	-
5.1.2 (Ref. Cl 4.1.a of IS 12786 : 1989)(Potyethylene - higher olefins constituent )	-	1000	-
5.1.2 (Ref. Cl 4.1.c.i of IS 12786 : 1989)(Density)	-	1000	-
5.1.2 (Ref. Cl 4.1.c.ii of IS 12786 : 1989)(Toluene extract - Annex A of IS 12786:1989)	-	1000	-
8.7.1(Resistance of PE Emitting Pipe to Environmental Stress Cracking -Acceptance Test Annex D of IS 12786)	-	2500	-
8.7.2(Resistance of PE Emitting Pipe to Environmental Stress Cracking - Type Test Annex D of IS 12786)	-	2500	-
8.5(Resistance to Tension at Elevated Temperature)	-	3200	-
4.1 a(Identification)	-	2500	-
6.3(General)	-	1500	-
6.1.1, Table 1,(ii)(Inside Diameter)	-	500	-
6.1.1, Table 1,(i)(Nominal Diameter)	-	500	-
6.1.1, Table 1,(iv)(Wall Thickness)	-	500	-
6.1.1, Table 1,(iii)(Tolerance on I.D)	-	500	-
5.1.2 (Ref. Cl 4.3 of IS 12786 : 1989)(Addition of not more than 10 percent of the manufactures own rework material produced during the manufacture and works testing of pipe complying with this standard is permitted. No other rework material shall be used)	-	500	-
6.3(General)	-	250	-
8.2.1(Unregu/Qt~d Emining Pipe)	-	500	-
8.2.2(Regulated Emitting Pipes)	-	500	-
4.1 a(Identification)	-	0	-
4.1 c(Volatile matter Extract)	-	0	-
4.1 d(Density)	-	0	-
4.1 d(MFI @ 1900C/2.16 Kg)	-	1000	-
4.2(Carbon black content)	-	1500	-
4.2(Carbon black dispersion)	-	1500	-
5.1(Materials)	-	1000	-
6.2(Fittings)	-	250	-
6.3(General)	-	250	-
7.1(Test Specimens)	-	0	-
7.2(Order of Tests)	-	0	-
7.3(Testing Conditions)	-	0	-
7.4(Accuracy of Measuring Devices)	-	0	-
8.1(Uniformity of Emission Rate)	-	500	-
8.1.2(Unregulated Emitting Pipes)	-	250	-
8.1.3(Regulated Emitting Pipes)	-	250	-
8.2(Emission Rate of Emitting Unit as a Function of Inlet Pressure)	-	0	-
8.2.1(Unregulated Emitting Pipes)	-	0	-
8.2.2(Regulated Emitting Pipes)	-	0	-
8.3.1(Wall Thickness ofEmitting Pipe)	-	0	-
8.3.2(Inside Diameter ofEmitting Pipe)	-	0	-
8.3.3(Flow Paths in Emitting Unit)	-	0	-
8.3.4(Spacing of Emitter Units)	-	0	-
8.4(Resistance of Emitting Pipes to Hydrostatic Pressure)	-	5000	-
8.5(Resistance to Tension at Elevated Temperature)	-	5000	-
8.6(Resistance to Pull Out ofJoints Between Fitting and Emitting)	-	2000	-
8.7.1(Acceptance Test)	-	4000	-
8.7.2(Type Test)	-	4000	-
8.8(Determination of Emitting Unit Exponen)	-	3500	-
9.1(Non-regulated Emitting Pipe)	-	0	-
9.2(Regulated Emitting Pipe)	-	0	-
10.1(Marking)	-	0	-
8.5(Resistance to Tension at Elevated Temperature)	-	0	-
8.5(Resistance to Tension at Elevated Temperature)	-	0	-

11 Jan, 2027

-
Up to & Including 25mm

10202

ARDM Labs Pvt Ltd

8175706

IS 12786 (1989)

Irrigation equipment - Polyethylene pipes for irrigation laterals - Specification

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.c.iii (Volatile matter - Annex B )	-	1500	-
4.2.b (The dispersion of Carbon Black content shall be satisfactory - IS 2530 : 1963)	-	1500	-
4.1.b(Potyethylene - anti-oxidant)	-	2500	-
Cl. 4.2(Carbon Black Content)	-	1500	-
Cl. 4.2(Carbon Black Dispersion)	-	1500	-
7.4(SusceptibiIity to Environmental Stress Cracking)	-	2000	-
4.1.c.ii (Toluene extract - Annex A)	-	1500	-
5 and Table 1(DIMENSIONS OF PIPES - wall thickness shall)	-	500	-
7.3(Elongation at Break)	-	1500	-
7.1 Table-2 (b)Acceptance Test for 01 hour at 20°C & 6.9MPa induced stress)	-	2500	-
7.1 Table-2 (Hydraulic Characteristics a)Quality Test for 100 hours at 70°C & 2.5.MPa induced stress. )	-	3000	-
7.2(Reversion Test)	-	2000	-
7.3(Tensile Test)	-	1500	-
6.1(Visual Appearance)	-	500	-
5 and Table 1(DIMENSIONS OF PIPES - outside diameters)	-	500	-
4.1.a (Potyethylene - higher olefins constituent )	-	1000	-
4.1.c.i (Density)	-	1000	-
4.1.c & 4.2.a (Carbon Black content - IS 2530 : 1963)	-	1500	-
7.2(Reversion Test)	-	0	-
5 and Table 1(DIMENSIONS OF PIPES - outside diameters)	-	0	-
5 and Table 1(DIMENSIONS OF PIPES - outside diameters)	-	0	-
7.2(Reversion Test)	-	0	-
7.1(Hydraulic Characteristics)	-	0	-
7.1(Hydraulic Characteristics)	-	0	-
3.1(Class of Pipe)	-	500	-
9.0 (9.1)(Minimum Internal Diameter of Coil)	-	250	-
9.0 (9.1)(Coiling )	-	250	-
8.0 (8.1) (Supply of pipes )	-	250	-
5.0 5.1 (Table1) (c)Wall thickness of pipe Maximum)	-	250	-
5.0 5.1 (Table1) (c)Wall thickness of pipe Minimum)	-	250	-
5.0 5.1 (Table1) (b)Tolerance on OD)	-	250	-
5.0 5.1 (Table1) (Dimensions a)Outside diameter of pipe)	-	250	-
Cl. 5.0 & 5.1 Table -1(Outside Diameter)	-	250	-
Cl. 5.0 & 5.1 Table -1(,Tolerence,)	-	250	-
Cl. 5.0 & 5.1 Table -1(Wall Thckness)	-	250	-
Cl. 7.1 Table -2(Acceptance Test for 1 hrs @ 27 c & 6.9 Mpa)	-	1000	-
Cl. 7.3(Tensile Test)	-	1000	-
Cl. 7.3(Elongation)	-	1000	-
Cl. 8.0- 8.1(Supply of pipes)	-	250	-
Cl. 9.0 - 9.1(Minimum Internal Diameter of Coil)	-	250	-
4.1.c(iv)(MATERIAL)	-	500	-
4.1d(MATERIAL)	-	500	-
4.2a(Carbon Black Content)	-	1500	-
7.4(SusceptibiIity to Environmental Stress)	-	0	-
4(MATERIAL)	-	0	-
5.1(Diameters and wall thicknesses)	-	0	-
6(VISUAL APPEARANCE)	-	0	-
7.1(Hydraolic Characteristics)	-	0	-
7.2(Reversion Test)	-	0	-
7.3(Tensile Test)	-	0	-
7.3.1(Test Piece)	-	0	-
7.3.2(Procerdure)	-	0	-
7.4(SusceptibiIity to Environmental Stress Cracking)	-	0	-
8(SUPPLY OF PIPES)	-	0	-
9(COILING)	-	0	-
11(Marking)	-	0	-
4.3(Addition of not more than 10 percent of the manufactures own rework material produced during the manufacture and works testing of pipe complying with this standard is permitted. No other rework material shall be used)	-	500	-
5 and Table 1(DIMENSIONS OF PIPES - wall thickness shall)	-	500	-
6.0 (6.1) (Visual appearance)	-	0	-
Cl. 7.1 Table -2(Quality Test for 100 hrs @ 70 c & 2.2 Mpa)	-	0	-
5 and Table 1(DIMENSIONS OF PIPES - wall thickness shall)	-	0	-

11 Jan, 2027

-
Up to & Including 32mm

10203

ARDM Labs Pvt Ltd

8175706

IS 15328 (2003)

Unplasticized Non-Pressure Polyvinyl Chloride ( PVC -U ) Pipes for use in Underground Drainage and Sewerage Systems -

25000 View breakup
Up to & Including 630mm

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1,6.1.1 IS 12235 (Part 1) Table 1(Dimension of Pipes: Mean outside Diameter, dem)	-	250	-
6.1,6.1.1 IS 12235 (Part 1) Table 1(Outside Diameter at any point, de)	-	250	-
6.1.2 IS 4985 Table 2(Wall Thickness, e )	-	250	-
6.1.3 (Length of Pipe)	-	250	-
6.1.4, Table 3(Dimensions of integral sockets and spigot ends :- a) Elastomeric Sealing Ringsockets and spigot ends i)Meean inside dia. Of socket, dsm)	-	250	-
6.1.4, Table 4(b) Solvent Cement Joint sockets and spigot ends i) Mean inside dia. Of socket, dsm)	-	250	-
6.1.4, Table 4(ii) Length of Solvent Cement socket, l2 )	-	250	-
6.1.4, Table 4(iii) Length of spigot, l1, 100 mm Min.)	-	250	-
6.1.4, Table 4(iv) Chamfer length, H, 7 mm Approx.)	-	250	-
7.1(Appearance:- )	-	250	-
7.2(Colour )	-	250	-
7.3 IS 1223S ( Part 2)(Vicat Softening Temperature When determined according to IS 1223S ( Part 2), shall not be lessthan 79°C.)	-	1000	-
7.4 IS 1223S ( Part 5)(Longitudinal Reversion: When tested according to the methodprescribed in IS 1223S ( Part 5), shall not exceed ± 5 percent. The pipe shall not exhibit any blisters, bubbles or crackson completion of the test.)	-	2500	-
8.1 Annex B(Resistance to External Blows at 0ºC: When tested according to the method prescribed in Annex B, the pipes hall have a true impact rate of not more than I0 percent.)	-	3000	-
8.2 Annex C Table 5(Ring Stiffness: When tested according to the method described in Annex C,the ring stiffness of the pipe shall be as stated in Table 5)	-	2500	-
8.3 IS 12235 ( Part 8/ Sec 1 ) Table 6(Resistance to internal Hydrostatic Pressure(Type Test) a) Acceptance Test:(1h at 27 0 C) )	-	2500	-
8.3 IS 12235 ( Part 8/ Sec 1 ) Table 6(b) Type Test:(1000h at 60 0 C) )	-	10000	-
9 9.1, IS 5382(JOINTS:- a) Elastomeric Sealing Rings)	-	2500	-
10.1.1 Annex D(Internal hydrostatic pressure test for elastomeric sealing ring joints)	-	1100	-
10.1.2 Annex E(Internal negative hydrostatic pressure test (internal vacuum) for elastomeric sealing ring joints)	-	1200	-
10.2.1(Internal hydrostatic pressure test for solvent cemented Joints)	-	1500	-
10.2.2(Internal negative hydrostatic pressure test (internal vacuum)for solvent cemented joints)	-	1500	-
'7.5 (amdt.7)(Effect on Water (Type test))	-	4000	-
6.1.4, Table 3(v) Chamfer length, H : Approx.)	-	500	-
6.1.4, Table 3(ii) Min. depth of engagement, A. )	-	500	-
6.1.4 Table 3(iii) Depth of sealing Zone C )	-	500	-
6.1.4, Table 3(iv) Length of spigot, l1)	-	500	-
5.3(Qualitative)	-	500	-
5,5.2(Composition of the material The material shall contain a minimum of 0.3 percent of rutile grade titanium dioxide.)	-	500	-
6.1.4.1 (wall thickness of sockets e2 min=0.9e )	-	0	-
6.1.4.1 (e3min=0.75e)	-	0	-
7.1(Appearance:- )	-	0	-
8(MECHANICAL CHARACTERISTICS)	-	0	-
9.2 IS 14182(b) Solvent cement)	-	500	-
10(Performance requirements)	-	0	-
12(Marking)	-	250	-
7(Physical characteristics )	-	0	-

11 Jan, 2027

-
-

10204

ARDM Labs Pvt Ltd

8175706

IS 15801 (2008)

Polypropylene - Random copolymer pipes for hot and cold water supplies - Specification

SDR: 11, 7.4, 6, 5 (DN 16 mm TO DN 200 mm.)

106000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4( Designation)	-	250	10% discount for bis
5(Colour)	-	250	10% discount for bis
Cl 7(Dimensions Of Pipes)	-	250	10% discount for bis
Cl 8(Visual Appearance)	-	250	10% discount for bis
Cl 9.2(Fusion Compatibility)	-	4000	10% discount for bis
Cl 9.1(Hydraulic Characteristics)	-	23000	10% discount for bis
Cl 9.3(Reversion Test )	-	700	10% discount for bis
Cl 9.4 & Annex B(Impact Strength)	-	1000	10% discount for bis
Cl 9.5(Density)	-	1000	10% discount for bis
Cl 9.6(Melt Flow Rate)	-	1000	10% discount for bis
Cl 9.7(Carbon Black Content & Dispersion)	-	1600	10% discount for bis
Cl 9.8(Thermal Stability By Hydrostatic Pressure Testing)	-	60000	10% discount for bis
Cl 9.9(Opacity)	-	950	10% discount for bis
5(Colour)	-	0	-
Cl 7(Dimensions Of Pipes)	-	0	-
Cl 8(Visual Appearance)	-	0	-
Cl 9.2(Fusion Compatibility)	-	0	-
Cl 9.1(Hydraulic Characteristics)	-	0	-
Cl 9.8(Thermal Stability By Hydrostatic Pressure Testing)	-	0	-
Cl 9.3(Reversion Test )	-	0	-
Cl 9.4 & Annex B(Impact Strength)	-	0	-
Cl 9.5(Density)	-	0	-
Cl 9.6(Melt Flow Rate)	-	0	-
Cl 9.7(Carbon Black Content & Dispersion)	-	0	-
Cl 9.9(Opacity)	-	0	-
Cl 4( Designation)	-	0	-

11 Jan, 2027

-
Included w.e.f. 28.06.2024

10205

ARDM Labs Pvt Ltd

8175706

IS 15778 (2007)

Chlorinated polyvinyl chloride (Cpvc) pipes for potable hot and cold water distribution supplies - Specification

(Class1 / Class 2/ Class 3) SDR 11 /SDR 13.5 / SDR 17

104000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.6 IS 12235(Part 14)(Density)	-	950	10% DISCOUNT FOR BIS ON FULL TESTING
7.1,7.1.1 IS 12235 (Part 1) Table 2(Outside Diameter at any point)	-	250	-
10.4 IS 12235(Part 19)(Flattening Test)	-	250	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	30000	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	0	-
7.1.3 (Effective length)	-	250	-
7.1 IS 12235 (Part 1) Table 2(Dimension of Pipes: Mean outside Diameter)	-	250	-
9.2 IS 12235 (Part 3)(Opacity)	-	900	-
8(Pipe Ends)	-	250	-
10.3 IS 4985 Table 4(Resistance to External Blow at O°C: When tested by the method prescribed in IS 4985, with classified striker mass and drop height as given in Table 4, the pipe shall have a true impact rate of not more than 10 percent.)	-	1000	-
9.4 IS 12235(Part 5/Sec 1 and Sec 2)(Reversion Test : When tested by the method prescribed in IS 12235(Part 5/Sec 1 and Sec 2), a length of pipe 200 + 20 mm long shall not alter in length by more than 5 percent.)	-	700	-
10.5 IS 12235(Part 13)(Tensile Strength : When tested by the method prescribed in IS 12235(Part 13), the tensile strength at yield shall not be less than 50 MPaat 27±2°C. )	-	1100	-
10.2 Table 3 IS 12235 (Part 8/Sec 1)(Thermal Stability by Hydrostatic Pressure Testing)	-	48000	-
6.3.2 Annex C(Verification of the Malfunction Temperature, Tmal: )	-	11000	-
9.5 IS 12235(Part 2)(Vicat Softening Temperature: When tested by the method prescribed in IS 12235(Part 2), the Vicat softening temperature of the specimen shall not be less than 110°C.)	-	1000	-
9.1(Visual Appearance)	-	250	-
9.1(Visual Appearance)	-	250	-
6.2.1 Annex B(Chloride Content of Resin)	-	2500	-
Cl. 9.3,IS 4985 Cl. 10.3(Lead (first extraction))	-	1500	-
Cl. 9.3,IS 4985 Cl. 10.3(Lead (third extraction))	-	1500	-
Cl. 9.3,IS 4985 Cl. 10.3(Dialkyl tin C4 and higher homologues measured as tin (third extraction))	-	1500	-
Cl. 9.3,IS 4985 Cl. 10.3(Cadmium (for all three extracts) )	-	1500	-
Cl. 9.3,IS 4985 Cl. 10.3(Mercury (for all three extracts) )	-	1500	-
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances such as 'di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate' (third extraction) )	-	1500	-
6.3(Compound Properties)	-	2500	-
6.3.1 Annex B(Chloride content)	-	2500	-
6.3.3(Density)	-	850	-
Cl. 9.3,IS 4985 Cl. 10.3(Lead (first extraction))	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances including di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate')	-	0	-
9.4 IS 12235(Part 5/Sec 1 and Sec 2)(Reversion Test : When tested by the method prescribed in IS 12235(Part 5/Sec 1 and Sec 2), a length of pipe 200 + 20 mm long shall not alter in length by more than 5 percent.)	-	750	-
9.6 IS 12235(Part 14)(Density)	-	950	-
10(Mechanical Properties)	-	0	-
7.1.2 IS 12235 (Part 1) Table 2(Wall Thickness )	-	250	-
5 Table 1(Classification of pipes)	-	250	-
6.3.2 IS 13360 (Part 3/See 1)(Density)	-	850	-
9(PHYSICAL AND CHEMICAL CHARACTERISTICS)	-	0	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	0	-
5 Table 1(Classification of pipes)	-	0	-
6.2.1 Annex B(Chloride Content of Resin)	-	0	-
6.3(Compound Properties)	-	0	-
6.3.1 Annex B(Chloride content)	-	0	-
6.3.2 Annex C(Verification of the Malfunction Temperature, Tmal: )	-	0	-
6.3.2 IS 13360 (Part 3/See 1)(Density)	-	0	-
7.1 IS 12235 (Part 1) Table 2(Dimension of Pipes: Mean outside Diameter)	-	0	-
7.1,7.1.1 IS 12235 (Part 1)Table 2(Outside Diameter at any point (Minimum))	-	250	-
7.1.2 IS 12235 (Part 1)Table 2(Wall Thickness (Minimum))	-	250	-
7.1.3 (Effective length)	-	250	-
8.0(Pipe Ends)	-	0	-
9.0(PHYSICAL AND 1CHARACTERISTICS)	-	0	-
9.1(Visual Appearance)	-	0	-
9.1(Visual Appearance)	-	0	-
9.2 IS 12235 (Part 3)(Opacity)	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Lead (third extraction))	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Dialkyl tin C4 and higher homologues measured as tin (third extraction))	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Cadmium (for all three extracts) )	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Mercury (for all three extracts) )	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances such as 'di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate' (third extraction) )	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances including di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate')	-	0	-
9.5 IS 12235(Part 2)(Vicat Softening Temperature: When tested by the method prescribed in IS 12235(Part 2), the Vicat softening temperature of the specimen shall not be less than 110°C.)	-	0	-
10.0(Mechanical Properties)	-	0	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	0	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	0	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	0	-
10.2 Table 3 IS 12235 (Part 8/Sec 1)(Thermal Stability by Hydrostatic Pressure Testing)	-	105000	-
10.3 IS 4985 Table 4(Resistance to External Blow at O°C: When tested by the method prescribed in IS 4985, with classified striker mass and drop height as given in Table 4, the pipe shall have a true impact rate of not more than 10 percent.)	-	0	-
10.4 IS 12235(Part 19)(Flattening Test)	-	0	-
10.5 IS 12235(Part 13)(Tensile Strength : When tested by the method prescribed in IS 12235(Part 13), the tensile strength at yield shall not be less than 50 MPaat 27±2°C. )	-	0	-
7.1.2(Wall Thickness (Maximum))	-	0	-
7.1.1(Outside Diameter at any point (Maximum))	-	0	-
6.3(K value Test)	-	0	-
5 Table 1(Classification of pipes)	-	0	-
6.2.1 Annex B(Chloride Content of Resin)	-	0	-
6.3(Compound Properties)	-	0	-
6.3.1 Annex B(Chloride content)	-	0	-
6.3.2 Annex C(Verification of the Malfunction Temperature, Tmal: )	-	0	-
6.3.2 IS 13360 (Part 3/See 1)(Density)	-	0	-
7.1 IS 12235 (Part 1) Table 2(Dimension of Pipes: Mean outside Diameter)	-	0	-
7.1,7.1.1 IS 12235 (Part 1) Table 2(Outside Diameter at any point)	-	0	-
7.1.2 IS 12235 (Part 1) Table 2(Wall Thickness )	-	0	-
7.1.3 (Effective length)	-	0	-
8(Pipe Ends)	-	0	-
9(PHYSICAL AND CHEMICAL CHARACTERISTICS)	-	0	-
9.1(Visual Appearance)	-	0	-
9.1(Visual Appearance)	-	0	-
9.2 IS 12235 (Part 3)(Opacity)	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Lead (first extraction))	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Lead (third extraction))	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Dialkyl tin C4 and higher homologues measured as tin (third extraction))	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Cadmium (for all three extracts) )	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Mercury (for all three extracts) )	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances such as 'di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate' (third extraction) )	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances including di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate')	-	0	-
9.4 IS 12235(Part 5/Sec 1 and Sec 2)(Reversion Test : When tested by the method prescribed in IS 12235(Part 5/Sec 1 and Sec 2), a length of pipe 200 + 20 mm long shall not alter in length by more than 5 percent.)	-	0	-
9.5 IS 12235(Part 2)(Vicat Softening Temperature: When tested by the method prescribed in IS 12235(Part 2), the Vicat softening temperature of the specimen shall not be less than 110°C.)	-	0	-
9.6 IS 12235(Part 14)(Density)	-	0	-
10(Mechanical Properties)	-	0	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	0	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	0	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	0	-
10.2 Table 3 IS 12235 (Part 8/Sec 1)(Thermal Stability by Hydrostatic Pressure Testing)	-	0	-
10.3 IS 4985 Table 4(Resistance to External Blow at O°C: When tested by the method prescribed in IS 4985, with classified striker mass and drop height as given in Table 4, the pipe shall have a true impact rate of not more than 10 percent.)	-	0	-
10.4 IS 12235(Part 19)(Flattening Test)	-	0	-
10.5 IS 12235(Part 13)(Tensile Strength : When tested by the method prescribed in IS 12235(Part 13), the tensile strength at yield shall not be less than 50 MPaat 27±2°C. )	-	0	-
5 Table 1(Classification of pipes)	-	0	-
6.2.1 Annex B(Chloride Content of Resin)	-	0	-
6.3(Compound Properties)	-	0	-
6.3.1 Annex B(Chloride content)	-	0	-
6.3.2 Annex C(Verification of the Malfunction Temperature, Tmal: )	-	0	-
6.3.2 IS 13360 (Part 3/See 1)(Density)	-	0	-
7.1 IS 12235 (Part 1) Table 2(Dimension of Pipes: Mean outside Diameter)	-	0	-
7.1,7.1.1 IS 12235 (Part 1)Table 2(Outside Diameter at any point (Minimum))	-	0	-
7.1.2 IS 12235 (Part 1)Table 2(Wall Thickness (Minimum))	-	0	-
7.1.3 (Effective length)	-	0	-
8.0(Pipe Ends)	-	0	-
9.0(PHYSICAL AND 1CHARACTERISTICS)	-	0	-
9.1(Visual Appearance)	-	0	-
9.1(Visual Appearance)	-	0	-
9.2 IS 12235 (Part 3)(Opacity)	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Lead (first extraction))	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Lead (third extraction))	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Dialkyl tin C4 and higher homologues measured as tin (third extraction))	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Cadmium (for all three extracts) )	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Mercury (for all three extracts) )	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances such as 'di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate' (third extraction) )	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances including di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate')	-	0	-
9.4 IS 12235(Part 5/Sec 1 and Sec 2)(Reversion Test : When tested by the method prescribed in IS 12235(Part 5/Sec 1 and Sec 2), a length of pipe 200 + 20 mm long shall not alter in length by more than 5 percent.)	-	0	-
9.5 IS 12235(Part 2)(Vicat Softening Temperature: When tested by the method prescribed in IS 12235(Part 2), the Vicat softening temperature of the specimen shall not be less than 110°C.)	-	0	-
9.6 IS 12235(Part 14)(Density)	-	0	-
10.0(Mechanical Properties)	-	0	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	0	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	0	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	0	-
10.2 Table 3 IS 12235 (Part 8/Sec 1)(Thermal Stability by Hydrostatic Pressure Testing)	-	0	-
10.3 IS 4985 Table 4(Resistance to External Blow at O°C: When tested by the method prescribed in IS 4985, with classified striker mass and drop height as given in Table 4, the pipe shall have a true impact rate of not more than 10 percent.)	-	0	-
10.4 IS 12235(Part 19)(Flattening Test)	-	0	-
10.5 IS 12235(Part 13)(Tensile Strength : When tested by the method prescribed in IS 12235(Part 13), the tensile strength at yield shall not be less than 50 MPaat 27±2°C. )	-	0	-
7.1.2(Wall Thickness (Maximum))	-	0	-
7.1.1(Outside Diameter at any point (Maximum))	-	0	-
6.3(K value Test)	-	0	-
6.3.3(Density)	-	0	-
5 Table 1(Classification of pipes)	-	0	-
6.2.1 Annex B(Chloride Content of Resin)	-	0	-
6.3(Compound Properties)	-	0	-
6.3.1 Annex B(Chloride content)	-	0	-
6.3.2 Annex C(Verification of the Malfunction Temperature, Tmal: )	-	0	-
6.3.2 IS 13360 (Part 3/See 1)(Density)	-	0	-
7.1 IS 12235 (Part 1) Table 2(Dimension of Pipes: Mean outside Diameter)	-	0	-
7.1,7.1.1 IS 12235 (Part 1) Table 2(Outside Diameter at any point)	-	0	-
7.1.2 IS 12235 (Part 1) Table 2(Wall Thickness )	-	0	-
7.1.3 (Effective length)	-	0	-
8(Pipe Ends)	-	0	-
9(PHYSICAL AND CHEMICAL CHARACTERISTICS)	-	0	-
9.1(Visual Appearance)	-	0	-
9.1(Visual Appearance)	-	0	-
9.2 IS 12235 (Part 3)(Opacity)	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Lead (first extraction))	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Lead (third extraction))	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Dialkyl tin C4 and higher homologues measured as tin (third extraction))	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Cadmium (for all three extracts) )	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Mercury (for all three extracts) )	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances such as 'di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate' (third extraction) )	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances including di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate')	-	0	-
9.4 IS 12235(Part 5/Sec 1 and Sec 2)(Reversion Test : When tested by the method prescribed in IS 12235(Part 5/Sec 1 and Sec 2), a length of pipe 200 + 20 mm long shall not alter in length by more than 5 percent.)	-	0	-
9.5 IS 12235(Part 2)(Vicat Softening Temperature: When tested by the method prescribed in IS 12235(Part 2), the Vicat softening temperature of the specimen shall not be less than 110°C.)	-	0	-
9.6 IS 12235(Part 14)(Density)	-	0	-
10(Mechanical Properties)	-	0	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	0	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	0	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	0	-
10.2 Table 3 IS 12235 (Part 8/Sec 1)(Thermal Stability by Hydrostatic Pressure Testing)	-	0	-
10.3 IS 4985 Table 4(Resistance to External Blow at O°C: When tested by the method prescribed in IS 4985, with classified striker mass and drop height as given in Table 4, the pipe shall have a true impact rate of not more than 10 percent.)	-	0	-
10.4 IS 12235(Part 19)(Flattening Test)	-	0	-
10.5 IS 12235(Part 13)(Tensile Strength : When tested by the method prescribed in IS 12235(Part 13), the tensile strength at yield shall not be less than 50 MPaat 27±2°C. )	-	0	-
7.1,7.1.1 IS 12235 (Part 1)Table 2(Outside Diameter at any point (Minimum))	-	0	-
7.1.2 IS 12235 (Part 1)Table 2(Wall Thickness (Minimum))	-	0	-
7.1.2(Wall Thickness (Maximum))	-	0	-
7.1.1(Outside Diameter at any point (Maximum))	-	0	-
6.3(K value Test)	-	0	-
6.3.3(Density)	-	0	-

11 Jan, 2027

-
Included w.e.f. 28.06.2024

10206

ARDM Labs Pvt Ltd

8175706

IS 14885 (2022)

Polyethylene Pipes for the Supply of Gaseous Fuels ï¿½ Specification (First Revision)

PE 80/ PE 100

425000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.3(Density)	-	950	10%discount for bis
5.1, 5.7 Table 2(iv) Volatile content)	-	900	10%discount for bis
5.3(Anti-oxidant)	-	1500	-
5.1, 5.7 Table 2(iii) Thermal stability (oxidation induction time))	-	2200	-
8.5(Pigment Dispersion)	-	1000	-
5.1, 5.7 Table 2(vi) Pigment dispersion)	-	1000	-
5.4(U.V. Stabilizer)	-	2200	-
5.1, 5.7 Table 2(v) Water content1))	-	1000	-
5.1, 5.7 Table 2(i) Conventional density (of base polymer))	-	1500	-
4.4(Colour)	-	250	-
5.5(Effect of Gas condensate on the Hydrostatic strength)	-	5000	-
7(Finish)	-	500	-
6.4(Length of Pipe)	-	500	-
5.1, 5.7 Table 2(ii) Melt flow rate (MFR))	-	1000	-
8.4(Melt Flow Rate (MFR))	-	1000	-
6.1(Mean out side Diameter (For less than or equal to 25 mm- Average of 8 , For higher diameters average of 6))	-	500	-
6.1(Out of Roundness (Ovality))	-	500	-
5.6(Resistance to Weathering)	-	8000	-
8.9(Resistance to Weathering)	-	25000	-
8.2(Reversion test)	-	1000	-
8.10(Slow Crack Growth Rate Test)	-	7000	-
8.11(Squeeze-of)	-	1000	-
8.8(Tensile Properties (Tensile Yield Strength and Elongation at Break))	-	1100	-
8.7(Volatile Matter Content)	-	1500	-
6.2(Wall thickness (Take 8 reading and Average will be repoted))	-	500	-
8.6(Thermal Stability (Oxidation Induction Time))	-	2200	-
5.7(PE Compound Quality Evaluation)	-	400000	-
8.1(Internal pressure creep rupture test for plain at 80 deg. C for 165h)	-	5000	-
8.1(Internal pressure creep rupture test for plain pipes at 20 deg. C for 100h)	-	4000	-
8.1(Internal pressure creep rupture test for plain pipes at 80 deg. C for 1000 h)	-	10000	-
4.2(Grade of material)	-	250	-
4.3(Nominal Diameter)	-	250	-
5.1(Polyethylene compound)	-	5000	-
5.4(U-V stabilizer)	-	0	-
8.2(Reversion Test)	-	1000	-
8.7(Volatile Matter Content)	-	850	-
8.8(Tensile Properties (Tensile Yield Strength and Elongation at Break))	-	0	-
8.9(Resistance to Weathering)	-	8000	-
8.10(Slow Crack Growth Rate Test)	-	0	-
8.11(Squeeze-off)	-	1000	-
5.3(Anti-Oxidant)	-	0	-
5.5(Effects of Gas Condensate on the Hydrostatic Strength)	-	0	-
5.6(ii) Hydraulic characteristics)	-	0	-
5.6(iii) Thermal stability (Oxidation induction time))	-	0	-
6(Dimensions of pipes)	-	500	-
7(Finish)	-	500	-
8.1(Hydraulic Characteristics)	-	0	-
8.3(Density)	-	0	-
8.4(Melt Flow Rate)	-	0	-
8.5(Pigment Dispersion)	-	0	-
8.6(Thermal Stability (Oxidation Induction Time))	-	0	-
10(Marking)	-	0	-
5.1, 5.7 Table 3(iv) Resistance to slow crack growth rate)	-	0	-
5.1, 5.7 Table 2(iv) Volatile content)	-	0	-
5.3(Anti-oxidant)	-	0	-
5.1, 5.7 Table 2(iii) Thermal stability (oxidation induction time))	-	0	-
8.5(Pigment Dispersion)	-	0	-
5.4(U.V. Stabilizer)	-	0	-
5.1, 5.7 Table 2(v) Water content1))	-	0	-
5.1, 5.7 Table 2(i) Conventional density (of base polymer))	-	0	-
4.4(Colour)	-	0	-
5.7(PE Compound Quality Evaluation)	-	0	-
5.5(Effect of Gas condensate on the Hydrostatic strength)	-	0	-
7(Finish)	-	0	-
6.4(Length of Pipe)	-	0	-
5.1, 5.7 Table 2(ii) Melt flow rate (MFR))	-	0	-
8.4(Melt Flow Rate (MFR))	-	0	-
6.1(Mean out side Diameter (For less than or equal to 25 mm- Average of 8 , For higher diameters average of 6))	-	0	-
6.1(Out of Roundness (Ovality))	-	0	-
5.6(Resistance to Weathering)	-	0	-
8.9(Resistance to Weathering)	-	0	-
8.2(Reversion test)	-	0	-
8.10(Slow Crack Growth Rate Test)	-	0	-
8.11(Squeeze-of)	-	0	-
8.8(Tensile Properties (Tensile Yield Strength and Elongation at Break))	-	0	-
8.7(Volatile Matter Content)	-	0	-
6.2(Wall thickness (Take 8 reading and Average will be repoted))	-	0	-
8.6(Thermal Stability (Oxidation Induction Time))	-	0	-
8.1(Internal pressure creep rupture test for plain at 80 deg. C for 165h)	-	0	-
8.1(Internal pressure creep rupture test for plain pipes at 20 deg. C for 100h)	-	0	-
8.1(Internal pressure creep rupture test for plain pipes at 80 deg. C for 1000 h)	-	0	-
8.3(Density)	-	0	-
5.1, 5.7 Table 2(vi) Pigment dispersion)	-	0	-
4.2(Grade of material)	-	0	-
4.3(Nominal Diameter)	-	0	-
5.1(Polyethylene compound)	-	0	-
5.4(U-V stabilizer)	-	0	-
8.2(Reversion Test)	-	0	-
8.7(Volatile Matter Content)	-	0	-
8.8(Tensile Properties (Tensile Yield Strength and Elongation at Break))	-	0	-
8.9(Resistance to Weathering)	-	0	-
8.10(Slow Crack Growth Rate Test)	-	0	-
8.11(Squeeze-off)	-	0	-
5.3(Anti-Oxidant)	-	0	-
5.5(Effects of Gas Condensate on the Hydrostatic Strength)	-	0	-
5.6(ii) Hydraulic characteristics)	-	0	-
5.6(iii) Thermal stability (Oxidation induction time))	-	0	-
6(Dimensions of pipes)	-	0	-
7(Finish)	-	0	-
8.1(Hydraulic Characteristics)	-	0	-
8.3(Density)	-	0	-
8.4(Melt Flow Rate)	-	0	-
8.5(Pigment Dispersion)	-	0	-
8.6(Thermal Stability (Oxidation Induction Time))	-	0	-
10(Marking)	-	0	-
5.1, 5.7 Table 3(iv) Resistance to slow crack growth rate)	-	0	-

11 Jan, 2027

-
Included w.e.f. 28.06.2024

10207

ARDM Labs Pvt Ltd

8175706

IS 9537 : Part 3 (1983)

Specification for conduits for electrical installations: Part 3 rigid plain conduits of insulating meterials

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.3(Length of conduit)	-	500	full testing as per is 9537 part 1+part 3 @ 12000
6.1(Marking)	-	500	full testing as per is 9537 part 1+part 3 @ 12000
7.1.2(Maximum and minimum outside diameter of conduit)	-	500	full testing as per is 9537 part 1+part 3 @ 12000
7.2(Minimum inside diameter of conduit)	-	500	full testing as per is 9537 part 1+part 3 @ 12000
7.4(Unifomity of The wall Thickness)	-	500	full testing as per is 9537 part 1+part 3 @ 12000
8.1(Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-	1000	full testing as per is 9537 part 1+part 3 @ 12000
9.2(Bending Test i) At Room Temp ii) At Low Temp (-5 ±2°C))	-	3000	full testing as per is 9537 part 1+part 3 @ 12000
9.3(Compression Test as per caluse 9.3 of IS: 9537 (Part 1)-1980)	-	2500	full testing as per is 9537 part 1+part 3 @ 12000
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	2500	full testing as per is 9537 part 1+part 3 @ 12000
10(Resistance to Heat -Ball presure test)	-	3000	full testing as per is 9537 part 1+part 3 @ 12000
11(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	2500	full testing as per is 9537 part 1+part 3 @ 12000
12(Electrical Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-	2500	full testing as per is 9537 part 1+part 3 @ 12000
7.1.1(Maximum and minimum outside diameter of socket)	-	0	full testing as per is 9537 part 1+part 3 @ 12000
7.1.1 Table-2(Length of Socket end)	-	0	full testing as per is 9537 part 1+part 3 @ 12000
9.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	3000	full testing as per is 9537 part 1+part 3 @ 12000
12(Electrical Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-	2500	full testing as per is 9537 part 1+part 3 @ 12000
13(Tests for external influence as per clause 13 of IS: 9537 (Part 1)-1980)	-	0	full testing as per is 9537 part 1+part 3 @ 12000
13(Tests for external influence as per clause 13 of IS: 9537 (Part 1)-1980)	-	0	-
12(3 Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-	0	-
12(3 Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-	0	-
11.0(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	0	-
10.0(Resistance to Heat -Ball presure test)	-	0	-
9.5 Fig.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	0	-
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	0	-
9.3(Compression Test (after removal of force) as per caluse 9.3.3 of IS: 9537 (Part 1)-1980)	-	0	-
9.3(Compression Test at Full force applied (On load))	-	0	-
9.2(Bending Test At Low Temp (-5 ±2°C))	-	0	-
9.2(Bending Test At Room Temp)	-	0	-
8.1(Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-	0	-
7.4(Unifomity of The wall Thickness)	-	0	-
7.3(Length of conduit)	-	0	-
7.2 Fig.3(Minimum inside diameter of conduit)	-	0	-
7.1.2 Fig.2(Minimum outside diameter of conduit)	-	0	-
7.1.2 Fig.1(Maximum outside diameter of conduit)	-	0	-
7.1.1 Table-2(Length of Socket end)	-	0	-
7.1.1 Fig.8(Maximum inside diameter of socket)	-	0	-
7.1.1 Fig.7(Maximum outside diameter of socket)	-	0	-
6.3(Standard Mark on Conduit)	-	0	-
6.2(Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980)	-	0	-
6.1 - d(Marking)	-	0	-
6.1 - c(Marking)	-	0	-
6.1 - b(Marking)	-	0	-
6.1 - a(Marking)	-	0	-
6.2(Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980)	-	250	-
6.3(Standard Mark on Conduit)	-	250	-

11 Jan, 2027

-
Up to & Including 63mm

10208

ARDM Labs Pvt Ltd

8175706

IS 9537 : Part 1 (1980)

Specification for conduits for electrical installations: Part 1 general requirements

Conduits for electrical installations: Part 1 General r

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Dimensions)	-	1000	-
9.3(Compression test)	-	2500	-
9.4(Impact test)	-	2500	-
10(Resistance to heat)	-	2500	-
11(Resistance to burning)	-	2500	-
12(Electrical strength test & Insulation resistance test)	-	2500	-
13(Eternal influences)	-	0	-
6(Marking)	-	500	-
8(Constrution)	-	500	-
9 & 9.2("Mechanical properties Bending test ")	-	2500	-
9.5(Collapse test)	-	2500	-

11 Jan, 2027

-
Up to & Including 63mm

10209

ARDM Labs Pvt Ltd

8175706

IS 13592 (2013)

Unplasticized Polyvinyl Chloride (PVC-U) Pipes for Soil and Waste Discharge System Inside and Outside Buiildings Including Ventilation and Rainwater System

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.5(Surface colour of the pipes shall be dark shade of grey)	-	500	-
Cl6.3(The composition shall be based on PVC resin having a K-value of 64 or greater when tested in accordance with IS 4669)	-	1500	-
Cl.7.1(Mean out side Diameter (For less than or equal to 40 mm- Average of 8 , For higher diameters up to 110 mm average of 6))	-	500	-
Cl.7.1(Wall thickness "minimum,maximum" (Take 8 reading))	-	500	-
Cl.7.2(Pipes shall be supplied in nominal lengths of 2, 3, 4 or 6 metres either plain or with socket for solvent cementing/grooved socket. Tolerances on specified length shall be + 10 mm and – 0 mm.The nominal length of the pipe with socket for solvent cementing/grooved socket shall be as given in Fig. 1.)	-	500	-
Cl.7.3.1(Minimum wall thickness of socket on pipes shall be as given in Table 2 read with Fig. 2 and Fig. 3.)	-	500	-
Cl.7.3.2(Dimensions of sockets for solvent cementing and grooved sockets of pipes shall be as given in Tables 3 and 4 respectively, read with Fig. 2 and 3.)	-	500	-
Cl.8.1(The internal and external surface of the pipes shall be smooth and clean, and free from grooving and other defects. The end shall be clearly cut and shall be square with the axis of the pipe. The end may be chamfered on the plain side.)	-	500	-
Cl.8.2(When tested by the method described in IS 12235 (Part 5), a length of pipe sample of 200 ± 20 mm shall not alter in length by more than 5 percent. In the case of socket ended pipes, this test shall be carried out on the plain portion of pipe taken at least 100 mm away from the root of the socket.)	-	500	-
Cl8.3(This test shall be carried out for socket end pipes only. When tested by the method described in IS 12235 (Part 6), the test specimens shall not show blisters, excessive delamination or cracking or signs of weld line splitting.)	-	1000	-
Cl.8.4(When determined in accordance with IS 12235 (Part 2), the vicat softening temperature of the specimen shall not be less than 79°C.)	-	1500	-
Cl.8.5(After the required period of exposure, the tensile strengths of two samples when tested as per IS 12235 (Part 13) shall not show difference of more than 20 percent of their initial tensile strengths)	-	3500	-
Cl. 9, IS 12235 Part 7(Resistance to Sulphuric Acid)	-	2500	-
Cl.10.1(When tested by method prescribed in IS 12235 (Part 9),the pipe shall have a true impact rate of not more than 10 percent. Mass of striker and height of fall shall be as per Annex A.)	-	1500	-
Cl.10.2(When determined in accordance with the method described in IS 12235 (Part 13), the tensile strength at break shall not be less than 45 MPa.)	-	2500	-
Cl.10.3(The axial shrinkage shall not exceed 2 percent when determined in accordance with Annex B.)	-	1000	-
Cl.11.(Jointing of solvent cementing joints is to be carried out using solvent conforming to IS 14182. Apply a pressure of 0.05 MPa for a period of 15 min and there should be no leakage at any joint.)	-	1000	-
Cl. 12, IS 12235 Part 11(Resistance to Di-Chloro-Methane)	-	1000	-
8.6(Effect on Water Test)	-	4000	-
14(Marking)	-	500	-
Cl.7.1(Outside Diameter at any point (Take 8 reading reported minimum, maximum))	-	500	-

11 Jan, 2027

-
Up to & Including 315mm

10210

ARDM Labs Pvt Ltd

8175706

IS 14735 (1999)

Unplasticized Polyvinyl Chloride (UPVC) Injection Moulded Fittings for Soil and Waste Discharge System for Inside and Outside Buildings Including Ventilation and Rain Water System -

13000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12.4(Effect on water test)	-	0	-
Cl.13, IS 12235 (P-7)-2004, (Resistance to Sulphuric Acid)	-	2500	-
Cl.15, Annex B(Sulphated Ash Content)	-	1500	-
Cl.14, Annex A(Titanium Di-Oxide Content)	-	2500	-
17(Watet tightness of joint)	-	1500	-
7.4(Chamfer)	-	500	-
5(Colour of fittings)	-	500	-
11(Design requirements)	-	500	-
16.1(Impact test)	-	1500	-
7.2 ,Table 2&3(Socket Dimensions)	-	500	-
11.2(Socket and spigot configeration)	-	500	-
12.3(Vicat softening tempewrature)	-	1500	-
12.1(Visual appearance)	-	500	-
10(Workmanship)	-	500	-
7.1,Table 1(Wall thickness)	-	500	-
3(Type of Fitting)	-	500	-
4(Size Designation)	-	500	-
8(Sealing Rings)	-	1000	-
11.3(Access Openings)	-	1000	-
12.2(Stress relief test)	-	1500	-
Table 4(Dimension of Access Openings)	-	500	-
19(Marking)	-	250	-
7.3(Dimensions of waste trap(Nahani Trap)	-	500	-
11.1(Solvent cement type or Rubber ring type)	-	500	-
11.5,Table 6(Pipe Clips)	-	500	-
12(Physical test requirements)	-	500	-
16(Mechanical Properties)	-	500	-
11.4,Table 5(Vent cowl)	-	500	-

11 Jan, 2027

-
Up to & Including 160mm

10211

ARDM Labs Pvt Ltd

8175706

IS 12818 (2010)

Unplasticized polyvinyl chloride (Pvc - U) screen and casing pipes for bore/tubewells - Specification (Second Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.0(Colour of Pipes)	-	500	-
4.1.2(K-Value as per IS-4669)	-	1500	-
4.1.1 (VCM Content as per IS 10151 (Annex A))	-	4000	-
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Wall thickness)	-	500	-
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Mean Outer Diameter over Connection)	-	500	-
9.6(Vicat Softening Temperature IS 12235 (Part 2).)	-	2000	-
9.5(Tensile Strength IS 12235(Part 13))	-	1500	-
9.4 and Table 14(Resistance to External Blows at 0 ?C IS 12235 (Part 9))	-	1500	-
9.3(Density IS 12235 (Part 14))	-	2000	-
9.2(Internal Diameter)	-	500	-
9.1( Visual Appearance)	-	500	-
8.1 to 8.3 and Table 11 &12 Fig 3A & 4A(THREADING OF SCREEN ANDCASING PIPES. IS 554.)	-	1500	-
7.4 Table 8 & 9 Fig 1(Segmental length for Spigot (average of 4.0))	-	250	-
7.4 Table 8 & 9 Fig 1(Segmental length,mm for socket (average of 4.0))	-	250	-
7.4 Table 8 & 9 Fig 1(Segmental length, l3)	-	250	-
7.4 Table 8 & 9 Fig 1(Effective length, l2)	-	250	-
7.3.2(Rib height)	-	250	-
7.3.1(No.of Ribs)	-	250	-
7.5 and Table 10 Fig 2A & 2B(Approximate Free Passage Area, in Percent (Mean Value) for Width of Slot (w))	-	500	-
5(COLOUR)	-	500	-
8.4(Sealing rings - Hardness)	-	500	-
9.7(Effect on Water a) Lead (first extraction) b) Lead (Third extraction) c) Dialkyl Tin C4 & higher homologues measured as Tin (Third extraction) d) Cadmium (All three extracts) e) Mercury (All three extracts) f) Other Toxic Substances )	-	4000	-
4.1.2 (Ref. Cl 11 of IS 4669)(Composition -Sulphated ash content )	-	2500	-
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	500	-
4.1.1 (Ref. 3.4.1. of IS 10151)(Composition - The monomer content (VCM content) in the resin - Annex A ofIS 10151)	-	0	-
9.1(Visual Appearance)	-	0	-
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	250	-
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	0	-
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	0	-
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	0	-
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	0	-
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	0	-
7.5 and Table 10 Fig 2A & 2B(Minimum number of slots on the circumference of the cross-section.)	-	1000	-
7.2 and Table 5, 6 & 7 Fig 1B(Wall thickness, Min)	-	0	-
7.2 and Table 5, 6 & 7 Fig 1B(Wall thickness, Max)	-	0	-
7.1, 7.2 and Table 5, 6 & 7 Fig 1B(Mean outside dia over connection,mm (Take 4 reading and maximum valu reported))	-	0	-
7.1, 7.2 and Table 5, 6 & 7 Fig 1B(Outer Diameter at any point, Max)	-	0	-
7.1, 7.2 and Table 5, 6 & 7 Fig 1B(Outer Diameter at any point , Min)	-	0	-
7.2 and Table 5, 6 & 7 Fig 1B(Mean Outer Diameter of Pipe , Max)	-	0	-
7.2 and Table 5, 6 & 7 Fig 1B(Mean Outer Diameter of Pipe, Min)	-	0	-
7.2 and Table 5, 6 & 7 Fig 1B(Nominal Diameter)	-	0	-
7.2 and Table 5, 6 & 7 Fig 1B(DIMENSIONS - Casing Pipes)	-	1000	-
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Outer Diameter at any point )	-	0	-
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Mean Outer Diameter of Pipe)	-	0	-
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Nominal Diameter)	-	0	-
4.1.2 (Ref. Cl 5.1. of IS 4669)(Composition - Loss on heating )	-	0	-
8.4(Sealing elements a. Elastomeric material b. Shore A hardness of sealing Elements )	-	0	-
8.4(Width b)	-	250	-
8.3.1 & 8.3.2 (Threading of casing pipe (from 100 to 200 DN Table – 11 & Fig. 3A) & (from 250 to 400 DN Table – 12 & Fig. 4A) Outside diameter d1(+0, -0.3) d2 d3 D1 (+0.3, -0) D2 D4 D5 (+0.3, -0) Z h3 (+0, -0.1) H4 (+0, -0.1) )	-	500	-
8.2(Threading of casing pipe As per IS 554 (from 40 to 80mm DN) Number of threads in 25.4mm Pitch (P) Height of thread (h) Major (Gauge Diameter) d Pitch(d2) Minor (d1) External Thread gauge length Nominal No. of turns of thread max min )	-	500	-
7.5.1 7.5.2 (Slot Dimension (Table 10) Fig 2A & 2B a. Minimum number of slot on the circumference b. Σa±5% c. Mean value of approximate free passage area (%) for width of slot (w) d. Tolerance on width of slot (w) e. Width of material between slot (b))	-	0	-
7.1(Screen Pipes)	-	250	-
11(Marking)	-	250	-
5.1(Materials)	-	500	-
8.1 to 8.3 and Table 11 &12 Fig 3A & 4A(THREADING OF SCREEN ANDCASING PIPES. IS 554.)	-	500	-
7.5 and Table 10 Fig 2A & 2B(Summation of slot lengths over internal circumference of the cross- section.)	-	500	-

11 Jan, 2027

-
Up to & Including 400mm

10212

ARDM Labs Pvt Ltd

8175706

IS 12701 (1996)

Rotational moulded polyethylene water storage tanks - specification (First Revision)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.2(MFR)	-	1500	500 TO 1000 Liters full testing @25000,1500 TO 10000 Liters full testing @35000
4.2.1(Density)	-	1000	500 TO 1000 Liters full testing @25000,1500 TO 10000 Liters full testing @35000
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	500	500 TO 1000 Liters full testing @25000,1500 TO 10000 Liters full testing @35000
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	3000	500 TO 1000 Liters full testing @25000,1500 TO 10000 Liters full testing @35000
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	0	500 TO 1000 Liters full testing @25000,1500 TO 10000 Liters full testing @35000
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	0	500 TO 1000 Liters full testing @25000,1500 TO 10000 Liters full testing @35000
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	0	500 TO 1000 Liters full testing @25000,1500 TO 10000 Liters full testing @35000
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	0	500 TO 1000 Liters full testing @25000,1500 TO 10000 Liters full testing @35000
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	3000	500 TO 1000 Liters full testing @25000,1500 TO 10000 Liters full testing @35000
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	0	500 TO 1000 Liters full testing @25000,1500 TO 10000 Liters full testing @35000
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	0	500 TO 1000 Liters full testing @25000,1500 TO 10000 Liters full testing @35000
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	0	500 TO 1000 Liters full testing @25000,1500 TO 10000 Liters full testing @35000
4.2.3(Carbon Black Content )	-	1500	500 TO 1000 Liters full testing @25000,1500 TO 10000 Liters full testing @35000
4.2.3(Carbon Dispersion Test)	-	2500	500 TO 1000 Liters full testing @25000,1500 TO 10000 Liters full testing @35000
6.1(Finish)	-	2500	-
7.1.1(Resistance to Deformation)	-	1500	500 TO 1000 Liters full testing @25000,1500 TO 10000 Liters full testing @35000
7.1.2(Resistance to Deformation)	-	2500	500 TO 1000 Liters full testing @25000,1500 TO 10000 Liters full testing @35000
7.2(Resistance to Impact)	-	2500	500 TO 1000 Liters full testing @25000,1500 TO 10000 Liters full testing @35000
7.3(Test for Top Load Resistance)	-	2500	500 TO 1000 Liters full testing @25000,1500 TO 10000 Liters full testing @35000
7.4(Tensile Strength)	-	2500	500 TO 1000 Liters full testing @25000,1500 TO 10000 Liters full testing @35000
7.5(Flexural Modulus)	-	2500	500 TO 1000 Liters full testing @25000,1500 TO 10000 Liters full testing @35000
Cl-7.6(Overall Migration)	-	3500	500 TO 1000 Liters full testing @25000,1500 TO 10000 Liters full testing @35000
9.1(Lid Thickness)	-	1000	500 TO 1000 Liters full testing @25000,1500 TO 10000 Liters full testing @35000
9.1(Man-Hole and Hand-Hole Lids)	-	4000	500 TO 1000 Liters full testing @25000,1500 TO 10000 Liters full testing @35000
9.2(Man-Hole and Hand-Hole Lids)	-	1000	500 TO 1000 Liters full testing @25000,1500 TO 10000 Liters full testing @35000
7.3(Test for Top Load Resistance)	-	500	500 TO 1000 Liters full testing @25000,1500 TO 10000 Liters full testing @35000
5.3(Types and Features )	-	500	500 TO 1000 Liters full testing @25000,1500 TO 10000 Liters full testing @35000
5.6(Types and Features )	-	0	500 TO 1000 Liters full testing @25000,1500 TO 10000 Liters full testing @35000
7.6(overall Migration)	-	0	-
5(Types and Features )	-	0	-
5.4(Wall Thickness above effective height)	-	500	-
5.2 Table 2 (7)(Minimum Wall Thickness)	-	500	-
5.1 Table 1 (7)(Minimum Weight of Tank (Without Lid))	-	500	-
4.2.2(MFI)	-	1500	-
7.6(overall Migration)	-	0	-
4.1(MATERIALS)	-	1000	-
4.2.1(Density)	-	1500	-
5.4(Wall Thickness)	-	1000	-
10(MARKING)	-	250	-
9.2.1(Man-Hole and Hand-Hole Lids)	-	250	-
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	0	-
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	0	-
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	0	-
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	0	-
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	0	-
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	0	-
6.1(Finish)	-	500	-

11 Jan, 2027

-
Included w.e.f. 28.06.2024

10213

ARDM Labs Pvt Ltd

8175706

IS 7834 : Part 1 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 1 General requirements

njection moulded PVC socket fittings with solvent cemen

12000 View breakup
(including test for PVC resin)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4(Minimum Thickness)	-	500	-
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Minimum Socket Length)	-	500	-
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Mean Socket Internal Diameter at Mid-Point of Socket Length)	-	500	-
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Out-of-roundness tolerances of socket inside diameter)	-	500	-
Cl. 6.1(Stress Relief Test- Appendix A)	-	2500	-
Cl. 6.2(Opacity- Appendix B)	-	2000	-
Cl. 6.3(Effect on Water[(Lead ( first extraction )]- Appendix C)	-	0	-
Cl. 6.3(Effect on Water[(Lead ( third extraction )]- Appendix C)	-	0	-
Cl. 6.3(Effect on Water [Dialkyl tin C4, and higher homologues, measured as tin ( third extraction )]- Appendix C)	-	0	-
Cl. 6.3(Effect on Water [Other toxic substances ( third extraction )]- Appendix C)	-	0	-
6.4(Short-Term Hydraulic Test)	-	2500	-
6.1.1(VCM Content Test)	-	10000	-
5(Socket dimensions)	-	500	-
6.3(Effect on Water)	-	4000	COMPLETE TEST CHARGES
3(Size of Fitting -)	-	200	-
7.2(Production Routine Tests)	-	0	-
6.1(Stress Relief Test)	-	0	-
6.2(Opacity)	-	0	-
Cl. 6.4(Short-Term Hydraulic Test- Appendix D)	-	0	-
4(Minimum thickness)	-	0	-

11 Jan, 2027

-
Up to & Including 630mm

10214

Vimta labs Limited, Hyderabad

6102906

IS 14543 (2024)

Packaged Drinking Water Other than Packaged Natural Mineral Water Specification Third Revision

chemical-biological-radioactivity adn contaminants

32900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.3, Table-1 (i)(Colour, true colour units, Max)	-	300	10% Discount to all BIS Parameters
Cl-5.3, Table-1 (ii)(Odour)	-	100	10% Discount to all BIS Parameters
Cl-5.3, Table-1 (iii)(Taste)	-	100	10% Discount to all BIS Parameters
Cl-5.3, Table-1 (iv)(Turbidity, nephelometric turbidity unit (NTU), Max)	-	300	10% Discount to all BIS Parameters
Cl-5.3, Table-1 (v)(Total dissolved solids, mg/l, Max)	-	300	10% Discount to all BIS Parameters
Cl-5.3, Table-1 (vi)(pH)	-	300	10% Discount to all BIS Parameters
Cl-5.3, Table-2 (i)(Barium (as Ba))	-	500	10% Discount to all BIS Parameters
Cl-5.3, Table-2 (ii)(Copper (as Cu))	-	500	10% Discount to all BIS Parameters
Cl-5.3, Table-2 (iii)(Iron (as Fe))	-	500	10% Discount to all BIS Parameters
Cl-5.3, Table-2 (iv)(Manganese (as Mn))	-	500	10% Discount to all BIS Parameters
Cl-5.3, Table-2 (v)(Nitrate (as NO3 ))	-	400	10% Discount to all BIS Parameters
Cl-5.3, Table-2 (vi)(Nitrite (as NO2 ))	-	400	10% Discount to all BIS Parameters
Cl-5.3, Table-2 (vii)(Fluoride (as F))	-	400	10% Discount to all BIS Parameters
Cl-5.3, Table-2 (viii)(Zinc (as Zn))	-	500	10% Discount to all BIS Parameters
Cl-5.3, Table-2 (ix)(Silver (as Ag))	-	500	10% Discount to all BIS Parameters
Cl-5.3, Table-2 (x)(Aluminium (as A1))	-	500	10% Discount to all BIS Parameters
Cl-5.3, Table-2 (xi)(Chloride (as Cl))	-	400	10% Discount to all BIS Parameters
Cl-5.3, Table-2 (xii)(Selenium (as Se))	-	500	10% Discount to all BIS Parameters
Cl-5.3, Table-2 (xiii)(Sulphate (as SO4 ))	-	400	10% Discount to all BIS Parameters
Cl-5.3, Table-2 (xiv)(Alkalinity (as HCO3 ))	-	400	10% Discount to all BIS Parameters
Cl-5.3, Table-2 (xv)(Calcium (as Ca))	-	400	10% Discount to all BIS Parameters
Cl-5.3, Table-2 (xvi)(Magnesium (as Mg))	-	400	10% Discount to all BIS Parameters
Cl-5.3, Table-2 (xvii)(Sodium (as Na))	-	400	10% Discount to all BIS Parameters
Cl-5.3, Table-2 (xviii)(Residual free chlorine)	-	250	10% Discount to all BIS Parameters
Cl-5.3, Table-2 (xix)(Phenolic compounds (as C6H5OH))	-	750	10% Discount to all BIS Parameters
Cl-5.3, Table-2 (xx)(Mineral oil)	-	1500	10% Discount to all BIS Parameters
Cl-5.3, Table-2 (xxi)(Anionic surface active agents)	-	1500	10% Discount to all BIS Parameters
Cl-5.3, Table-2 (xxii)(Sulphide)	-	750	10% Discount to all BIS Parameters
Cl-5.3, Table-2 (xxiii)(Antimony (as Sb))	-	500	10% Discount to all BIS Parameters
Cl-5.3, Table-2 (xxiv)(Borates (as B))	-	500	10% Discount to all BIS Parameters
Cl-5.3, Table-2 (xxv)(Bromates (as BrO3 ))	-	2500	10% Discount to all BIS Parameters
Cl-5.3, Table-3 (i)(Mercury (as Hg))	-	500	10% Discount to all BIS Parameters
Cl-5.3, Table-3 (ii)(Cadmium (as Cd))	-	500	10% Discount to all BIS Parameters
Cl-5.3, Table-3 (iii)(Arsenic (as As))	-	500	10% Discount to all BIS Parameters
Cl-5.3, Table-3 (iv)(Cyanide (as CN))	-	500	10% Discount to all BIS Parameters
Cl-5.3, Table-3 (v)(Lead (as Pb))	-	500	10% Discount to all BIS Parameters
Cl-5.3, Table-3 (vi)(Chromium (as Cr))	-	500	10% Discount to all BIS Parameters
Cl-5.3, Table-3 (vii)(Nickel (as Ni))	-	500	10% Discount to all BIS Parameters
Cl-5.3, Table-3 (viii)(Polychlorinated biphenyl (PCB))	-	500	10% Discount to all BIS Parameters
Cl-5.3, Table-3 (ix)(Polynuclear aromatic hydrocarbons)	-	500	10% Discount to all BIS Parameters
Cl-5.3, Table-3 (x)(Uranium)	-	500	10% Discount to all BIS Parameters
Cl-5.3, Table-4 (i)(Alpha emitters, Becquerel (Bq/l))	-	500	10% Discount to all BIS Parameters
Cl-5.3, Table-4 (ii)(Beta emitters, Becquerel (Bq/l),)	-	500	10% Discount to all BIS Parameters
5.4/Annex D/i(P,P-DDT)	-	500	10% Discount to all BIS Parameters
5.4/Annex D/i(O,P-DDT)	-	500	10% Discount to all BIS Parameters
5.4/Annex D/i(O,P-DDD)	-	500	10% Discount to all BIS Parameters
5.4/Annex D/i(P,P-DDD)	-	500	10% Discount to all BIS Parameters
5.4/Annex D/i(P,P-DDE)	-	500	10% Discount to all BIS Parameters
5.4/Annex D/i(O,P-DDE)	-	500	10% Discount to all BIS Parameters
5.4/Annex D/ii(Lindane)	-	500	10% Discount to all BIS Parameters
5.4/Annex D/iii(d-HCH)	-	500	10% Discount to all BIS Parameters
5.4/Annex D/iii(a-HCH)	-	500	10% Discount to all BIS Parameters
5.4/Annex D/iii(β- HCH)	-	500	10% Discount to all BIS Parameters
5.4/Annex D/iv(b-Endosulfan)	-	500	10% Discount to all BIS Parameters
5.4/Annex D/iv(a-Endosulfan)	-	500	10% Discount to all BIS Parameters
5.4/Annex D/iv(Endosulfan sulfate)	-	500	10% Discount to all BIS Parameters
5.4/Annex D/v(Monochrotophos)	-	500	10% Discount to all BIS Parameters
5.4/Annex D/vi(Ethion)	-	500	10% Discount to all BIS Parameters
5.4/Annex D/vii(Chlorpyrifos)	-	500	10% Discount to all BIS Parameters
5.4/Annex D/viii(Phorate sulphoxide)	-	500	10% Discount to all BIS Parameters
5.4/Annex D/viii(Phorate sulfone)	-	500	10% Discount to all BIS Parameters
5.4/Annex D/ix(2,4 –D)	-	500	10% Discount to all BIS Parameters
5.4/Annex D/x(Butachlor)	-	500	10% Discount to all BIS Parameters
5.4/Annex D/xi(Isoproturon)	-	500	10% Discount to all BIS Parameters
5.4/Annex D/xii(Alachlor)	-	500	10% Discount to all BIS Parameters
5.4/Annex D/xiii(Atrazine)	-	500	10% Discount to all BIS Parameters
5.4/Annex D/xiv(Methyl parathion)	-	500	10% Discount to all BIS Parameters
5.4/Annex D/xv(Malathion)	-	500	10% Discount to all BIS Parameters
5.4/Annex D/xvi(Dieldrin)	-	500	10% Discount to all BIS Parameters
5.4/Annex D/xvi(Aldrin)	-	500	10% Discount to all BIS Parameters
5.4/Annex D/viii(Phorate)	-	500	10% Discount to all BIS Parameters
Cl-5.2.1(Escherichia coli or thermotolerant bacteria)	-	350	10% Discount to all BIS Parameters
Cl-5.2.2(Coliform)	-	300	10% Discount to all BIS Parameters
Cl-5.2.3(Staphylococcus aureus)	-	600	10% Discount to all BIS Parameters
5.3(Appearance)	-	0	NIL
5.4/Annex D/xxvii(Methyl paraoxon)	-	500	10% Discount to all BIS Parameters
5.4/Annex D/xxviii(Malaoxon)	-	500	10% Discount to all BIS Parameters
Cl-5.1(General Requirements)	-	0	NIL
Cl-5.2.4(Sulphite Reducing Anaerobes)	-	500	10% Discount to all BIS Parameters
Cl-5.2.5(Pseudomonas Aeruginosa)	-	500	10% Discount to all BIS Parameters
Cl-5.2.6(Aerobic Microbial Count @ 37 deg C)	-	600	10% Discount to all BIS Parameters
Cl-5.2.7(Yeast and mould)	-	300	10% Discount to all BIS Parameters
Cl-5.2.8(Salmonella)	-	500	10% Discount to all BIS Parameters
Cl-5.2.9(Vibrio cholera)	-	600	10% Discount to all BIS Parameters
Cl-5.2.3(Faecal streptococci)	-	600	10% Discount to all BIS Parameters
Cl-5.2.8(shigella)	-	600	10% Discount to all BIS Parameters
Cl-5.2.9(V.parahaemolyticus)	-	600	10% Discount to all BIS Parameters
Cl-5.4 (i)(Pesticide residues considered individually)	-	600	10% Discount to all BIS Parameters
Cl-5.4 (ii)(Total pesticide residue)	-	600	10% Discount to all BIS Parameters
Cl-5.3, Table-1 (i)(Colour, true colour units, Max)	-	100	10% DISCOUNT TO BIS
Cl-5.3, Table-1 (ii)(Odour)	-	100	10% DISCOUNT TO BIS
Cl-5.3, Table-1 (iii)(Taste)	-	100	10% DISCOUNT TO BIS
Cl-5.3, Table-1 (iv)(Turbidity, nephelometric turbidity unit (NTU), Max)	-	100	10% DISCOUNT TO BIS
Cl-5.3, Table-1 (v)(Total dissolved solids, mg/l, Max)	-	200	10% DISCOUNT TO BIS
Cl-5.3, Table-1 (vi)(pH)	-	100	10% DISCOUNT TO BIS
Cl-5.3, Table-2 (i)(Barium (as Ba))	-	600	v
Cl-5.3, Table-2 (ii)(Copper (as Cu))	-	500	10% DISCOUNT TO BIS
Cl-5.3, Table-2 (iii)(Iron (as Fe))	-	500	10% DISCOUNT TO BIS
Cl-5.3, Table-2 (iv)(Manganese (as Mn))	-	500	10% DISCOUNT TO BIS
Cl-5.3, Table-2 (v)(Nitrate (as NO3 ))	-	400	10% DISCOUNT TO BIS
Cl-5.3, Table-2 (vi)(Nitrite (as NO2 ))	-	400	10% DISCOUNT TO BIS
Cl-5.3, Table-2 (vii)(Fluoride (as F))	-	400	10% DISCOUNT TO BIS
Cl-5.3, Table-2 (viii)(Zinc (as Zn))	-	500	10% DISCOUNT TO BIS
Cl-5.3, Table-2 (ix)(Silver (as Ag))	-	500	10% DISCOUNT TO BIS
Cl-5.3, Table-2 (x)(Aluminium (as A1))	-	500	10% DISCOUNT TO BIS
Cl-5.3, Table-2 (xi)(Chloride (as Cl))	-	400	10% DISCOUNT TO BIS
Cl-5.3, Table-2 (xii)(Selenium (as Se))	-	500	10% DISCOUNT TO BIS
Cl-5.3, Table-2 (xiii)(Sulphate (as SO4 ))	-	500	10% DISCOUNT TO BIS
Cl-5.3, Table-2 (xiv)(Alkalinity (as HCO3 ))	-	400	10% DISCOUNT TO BIS
Cl-5.3, Table-2 (xv)(Calcium (as Ca))	-	400	10% DISCOUNT TO BIS
Cl-5.3, Table-2 (xvi)(Magnesium (as Mg))	-	400	10% DISCOUNT TO BIS
Cl-5.3, Table-2 (xvii)(Sodium (as Na))	-	400	10% DISCOUNT TO BIS
Cl-5.3, Table-2 (xviii)(Residual free chlorine)	-	400	10% DISCOUNT TO BIS
Cl-5.3, Table-2 (xix)(Phenolic compounds (as C6H5OH))	-	600	10% DISCOUNT TO BIS
Cl-5.3, Table-2 (xx)(Mineral oil)	-	1000	10% DISCOUNT TO BIS
Cl-5.3, Table-2 (xxi)(Anionic surface active agents)	-	750	10% DISCOUNT TO BIS
Cl-5.3, Table-2 (xxii)(Sulphide)	-	400	10% DISCOUNT TO BIS
Cl-5.3, Table-2 (xxiii)(Antimony (as Sb))	-	500	10% DISCOUNT TO BIS
Cl-5.3, Table-2 (xxiv)(Borates (as B))	-	500	10% DISCOUNT TO BIS
Cl-5.3, Table-2 (xxv)(Bromates (as BrO3 ))	-	1000	10% DISCOUNT TO BIS
Cl-5.3, Table-3 (i)(Mercury (as Hg))	-	600	10% DISCOUNT TO BIS
Cl-5.3, Table-3 (ii)(Cadmium (as Cd))	-	500	10% DISCOUNT TO BIS
Cl-5.3, Table-3 (iii)(Arsenic (as As))	-	500	10% DISCOUNT TO BIS
Cl-5.3, Table-3 (iv)(Cyanide (as CN))	-	750	10% DISCOUNT TO BIS
Cl-5.3, Table-3 (v)(Lead (as Pb))	-	500	10% DISCOUNT TO BIS
Cl-5.3, Table-3 (vi)(Chromium (as Cr))	-	500	10% DISCOUNT TO BIS
Cl-5.3, Table-3 (vii)(Nickel (as Ni))	-	500	10% DISCOUNT TO BIS
Cl-5.3, Table-3 (viii)(Polychlorinated biphenyl (PCB))	-	1500	10% DISCOUNT TO BIS
Cl-5.3, Table-3 (ix)(Polynuclear aromatic hydrocarbons)	-	1500	v
Cl-5.3, Table-3 (x)(Uranium)	-	750	10% DISCOUNT TO BIS
Cl-5.3, Table-4 (i)(Alpha emitters, Becquerel (Bq/l))	-	3000	10% DISCOUNT TO BIS
Cl-5.3, Table-4 (ii)(Beta emitters, Becquerel (Bq/l),)	-	3000	10% DISCOUNT TO BIS
5.4/Annex D/i(P,P-DDT)	-	750	10% DISCOUNT TO BIS
5.4/Annex D/i(O,P-DDT)	-	750	10% DISCOUNT TO BIS
5.4/Annex D/i(O,P-DDD)	-	750	10% DISCOUNT TO BIS
5.4/Annex D/i(P,P-DDD)	-	750	10% DISCOUNT TO BIS
5.4/Annex D/i(P,P-DDE)	-	750	v10% DISCOUNT TO BIS
5.4/Annex D/i(O,P-DDE)	-	750	10% DISCOUNT TO BIS
5.4/Annex D/ii(Lindane)	-	750	10% DISCOUNT TO BIS
5.4/Annex D/iii(d-HCH)	-	750	10% DISCOUNT TO BIS
5.4/Annex D/iii(a-HCH)	-	750	10% DISCOUNT TO BIS
5.4/Annex D/iii(β- HCH)	-	750	10% DISCOUNT TO BIS
5.4/Annex D/iv(b-Endosulfan)	-	750	10% DISCOUNT TO BIS
5.4/Annex D/iv(a-Endosulfan)	-	750	10% DISCOUNT TO BIS
5.4/Annex D/iv(Endosulfan sulfate)	-	750	10% DISCOUNT TO BIS
5.4/Annex D/v(Monochrotophos)	-	750	10% DISCOUNT TO BIS
5.4/Annex D/vi(Ethion)	-	750	10% DISCOUNT TO BIS
5.4/Annex D/vii(Chlorpyrifos)	-	750	10% DISCOUNT TO BIS
5.4/Annex D/viii(Phorate sulphoxide)	-	750	10% DISCOUNT TO BIS
5.4/Annex D/viii(Phorate sulfone)	-	750	10% DISCOUNT TO BIS
5.4/Annex D/ix(2,4 –D)	-	750	10% DISCOUNT TO BIS
5.4/Annex D/x(Butachlor)	-	750	10% DISCOUNT TO BIS
5.4/Annex D/xi(Isoproturon)	-	750	10% DISCOUNT TO BIS
5.4/Annex D/xii(Alachlor)	-	750	10% DISCOUNT TO BIS
5.4/Annex D/xiii(Atrazine)	-	750	10% DISCOUNT TO BIS
5.4/Annex D/xiv(Methyl parathion)	-	750	10% DISCOUNT TO BIS
5.4/Annex D/xv(Malathion)	-	750	10% DISCOUNT TO BIS
5.4/Annex D/xvi(Dieldrin)	-	750	10% DISCOUNT TO BIS
5.4/Annex D/xvi(Aldrin)	-	750	10% DISCOUNT TO BIS
5.4/Annex D/viii(Phorate)	-	750	10% DISCOUNT TO BIS
Cl-5.2.1(Escherichia coli or thermotolerant bacteria)	-	750	10% DISCOUNT TO BIS
Cl-5.2.2(Coliform)	-	400	10% DISCOUNT TO BIS
Cl-5.2.3(Staphylococcus aureus)	-	600	10% DISCOUNT TO BIS
5.3(Appearance)	-	100	10% DISCOUNT TO BIS
5.4/Annex D/xxvii(Methyl paraoxon)	-	750	10% DISCOUNT TO BIS
5.4/Annex D/xxviii(Malaoxon)	-	750	10% DISCOUNT TO BIS
Cl-5.1(General Requirements)	-	0	nil
Cl-5.2.4(Sulphite Reducing Anaerobes)	-	600	10% DISCOUNT TO BIS
Cl-5.2.5(Pseudomonas Aeruginosa)	-	600	10% DISCOUNT TO BIS
Cl-5.2.6(Aerobic Microbial Count @ 37 deg C)	-	300	10% DISCOUNT TO BIS
Cl-5.2.7(Yeast and mould)	-	400	10% DISCOUNT TO BIS
Cl-5.2.8(Salmonella)	-	600	10% DISCOUNT TO BIS
Cl-5.2.9(Vibrio cholera)	-	600	10% DISCOUNT TO BIS
Cl-5.2.3(Faecal streptococci)	-	600	10% DISCOUNT TO BIS
Cl-5.2.8(shigella)	-	600	10% DISCOUNT TO BIS
Cl-5.2.9(V.parahaemolyticus)	-	600	10% DISCOUNT TO BIS
Cl-5.4 (i)(Pesticide residues considered individually)	-	750	10% DISCOUNT TO BIS
Cl-5.4 (ii)(Total pesticide residue)	-	5000	10% DISCOUNT TO BIS
5.4 i)(Dieldrin)	-	750	10% DISCOUNT TO BIS
5.4 i)(Aldrin)	-	750	10% DISCOUNT TO BIS
5.4 i)(Malathion)	-	750	10% DISCOUNT TO BIS
5.4, i)("oxygen analogue of Malathion (Malaoxon)")	-	750	10% DISCOUNT TO BIS
5.4 i)(Methyl Paraoxon)	-	750	10% DISCOUNT TO BIS
5.4 i)(Methyl Parathion)	-	750	10% DISCOUNT TO BIS
5.4 i)(Atrazine)	-	750	10% DISCOUNT TO BIS
5.4 i)(Alachlor)	-	750	10% DISCOUNT TO BIS
5.4 i)(Isoproturon)	-	750	10% DISCOUNT TO BIS
5.4 i)(Butachlor)	-	750	10% DISCOUNT TO BIS
5.4 i)(2,4-D)	-	750	10% DISCOUNT TO BIS
5.4 i)(Phorate sulphone)	-	750	10% DISCOUNT TO BIS
5.4 i)(Phorate sulphoxide)	-	750	10% DISCOUNT TO BIS
5.4 i)(Phorate)	-	750	10% DISCOUNT TO BIS
5.4 i)(Chlorpyrifos)	-	750	10% DISCOUNT TO BIS
5.4 i)(Ethion)	-	750	10% DISCOUNT TO BIS
5.4 i)(Monocrotophos)	-	750	10% DISCOUNT TO BIS
5.4 i)(Endosulfan Sulphate)	-	750	10% DISCOUNT TO BIS
5.4 i)(beta-Endosulfan)	-	750	10% DISCOUNT TO BIS
5.4 i)(alpha-Endosulfan)	-	750	10% DISCOUNT TO BIS
5.4 i)(Delta-HCH)	-	750	10% DISCOUNT TO BIS
5.4 i)(beta-HCH)	-	750	10% DISCOUNT TO BIS
5.4 i)(alpha-HCH)	-	750	10% DISCOUNT TO BIS
5.4 i)(Gamma-HCH (Lindane))	-	750	10% DISCOUNT TO BIS
5.4 i)(p,p DDD)	-	750	10% DISCOUNT TO BIS
5.4 i)(o,p DDD)	-	750	10% DISCOUNT TO BIS
5.4 i)(p,p DDE)	-	750	10% DISCOUNT TO BIS
5.4, i)(o,p DDE)	-	750	10% DISCOUNT TO BIS
5.4 i)(p,p DDT)	-	750	10% DISCOUNT TO BIS
5.4 i)(o,p DDT)	-	750	10% DISCOUNT TO BIS
Table 3, x)(Uranium)	-	750	10% DISCOUNT TO BIS
5.2.6(Aerobic Microbial Count @ 20 to 22 deg C)	-	300	10% DISCOUNT TO BIS
Cl-5.3, Table-1 (i)(Colour, true colour units, Max)	-	-	-
Cl-5.3, Table-1 (ii)(Odour)	-	-	-
Cl-5.3, Table-1 (iii)(Taste)	-	-	-
Cl-5.3, Table-1 (iv)(Turbidity, nephelometric turbidity unit (NTU), Max)	-	-	-
Cl-5.3, Table-1 (v)(Total dissolved solids, mg/l, Max)	-	-	-
Cl-5.3, Table-1 (vi)(pH)	-	-	-
Cl-5.3, Table-2 (i)(Barium (as Ba))	-	-	-
Cl-5.3, Table-2 (ii)(Copper (as Cu))	-	-	-
Cl-5.3, Table-2 (iii)(Iron (as Fe))	-	-	-
Cl-5.3, Table-2 (iv)(Manganese (as Mn))	-	-	-
Cl-5.3, Table-2 (v)(Nitrate (as NO3 ))	-	-	-
Cl-5.3, Table-2 (vi)(Nitrite (as NO2 ))	-	-	-
Cl-5.3, Table-2 (vii)(Fluoride (as F))	-	-	-
Cl-5.3, Table-2 (viii)(Zinc (as Zn))	-	-	-
Cl-5.3, Table-2 (ix)(Silver (as Ag))	-	-	-
Cl-5.3, Table-2 (x)(Aluminium (as A1))	-	-	-
Cl-5.3, Table-2 (xi)(Chloride (as Cl))	-	-	-
Cl-5.3, Table-2 (xii)(Selenium (as Se))	-	-	-
Cl-5.3, Table-2 (xiii)(Sulphate (as SO4 ))	-	-	-
Cl-5.3, Table-2 (xiv)(Alkalinity (as HCO3 ))	-	-	-
Cl-5.3, Table-2 (xv)(Calcium (as Ca))	-	-	-
Cl-5.3, Table-2 (xvi)(Magnesium (as Mg))	-	-	-
Cl-5.3, Table-2 (xvii)(Sodium (as Na))	-	-	-
Cl-5.3, Table-2 (xviii)(Residual free chlorine)	-	-	-
Cl-5.3, Table-2 (xix)(Phenolic compounds (as C6H5OH))	-	-	-
Cl-5.3, Table-2 (xx)(Mineral oil)	-	-	-
Cl-5.3, Table-2 (xxi)(Anionic surface active agents)	-	-	-
Cl-5.3, Table-2 (xxii)(Sulphide)	-	-	-
Cl-5.3, Table-2 (xxiii)(Antimony (as Sb))	-	-	-
Cl-5.3, Table-2 (xxiv)(Borates (as B))	-	-	-
Cl-5.3, Table-2 (xxv)(Bromates (as BrO3 ))	-	-	-
Cl-5.3, Table-3 (i)(Mercury (as Hg))	-	-	-
Cl-5.3, Table-3 (ii)(Cadmium (as Cd))	-	-	-
Cl-5.3, Table-3 (iii)(Arsenic (as As))	-	-	-
Cl-5.3, Table-3 (iv)(Cyanide (as CN))	-	-	-
Cl-5.3, Table-3 (v)(Lead (as Pb))	-	-	-
Cl-5.3, Table-3 (vi)(Chromium (as Cr))	-	-	-
Cl-5.3, Table-3 (vii)(Nickel (as Ni))	-	-	-
Cl-5.3, Table-3 (viii)(Polychlorinated biphenyl (PCB))	-	-	-
Cl-5.3, Table-3 (ix)(Polynuclear aromatic hydrocarbons)	-	-	-
Cl-5.3, Table-3 (x)(Uranium)	-	-	-
Cl-5.3, Table-4 (i)(Alpha emitters, Becquerel (Bq/l))	-	-	-
Cl-5.3, Table-4 (ii)(Beta emitters, Becquerel (Bq/l),)	-	-	-
5.4/Annex D/i(P,P-DDT)	-	-	-
5.4/Annex D/i(O,P-DDT)	-	-	-
5.4/Annex D/i(O,P-DDD)	-	-	-
5.4/Annex D/i(P,P-DDD)	-	-	-
5.4/Annex D/i(P,P-DDE)	-	-	-
5.4/Annex D/i(O,P-DDE)	-	-	-
5.4/Annex D/ii(Lindane)	-	-	-
5.4/Annex D/iii(d-HCH)	-	-	-
5.4/Annex D/iii(a-HCH)	-	-	-
5.4/Annex D/iii(β- HCH)	-	-	-
5.4/Annex D/iv(b-Endosulfan)	-	-	-
5.4/Annex D/iv(a-Endosulfan)	-	-	-
5.4/Annex D/iv(Endosulfan sulfate)	-	-	-
5.4/Annex D/v(Monochrotophos)	-	-	-
5.4/Annex D/vi(Ethion)	-	-	-
5.4/Annex D/vii(Chlorpyrifos)	-	-	-
5.4/Annex D/viii(Phorate sulphoxide)	-	-	-
5.4/Annex D/viii(Phorate sulfone)	-	-	-
5.4/Annex D/ix(2,4 –D)	-	-	-
5.4/Annex D/x(Butachlor)	-	-	-
5.4/Annex D/xi(Isoproturon)	-	-	-
5.4/Annex D/xii(Alachlor)	-	-	-
5.4/Annex D/xiii(Atrazine)	-	-	-
5.4/Annex D/xiv(Methyl parathion)	-	-	-
5.4/Annex D/xv(Malathion)	-	-	-
5.4/Annex D/xvi(Dieldrin)	-	-	-
5.4/Annex D/xvi(Aldrin)	-	-	-
5.4/Annex D/viii(Phorate)	-	-	-
Cl-5.2.1(Escherichia coli or thermotolerant bacteria)	-	-	-
Cl-5.2.2(Coliform)	-	-	-
Cl-5.2.3(Staphylococcus aureus)	-	-	-
5.3(Appearance)	-	-	-
5.4/Annex D/xxvii(Methyl paraoxon)	-	-	-
5.4/Annex D/xxviii(Malaoxon)	-	-	-
Cl-5.1(General Requirements)	-	-	-
Cl-5.2.4(Sulphite Reducing Anaerobes)	-	-	-
Cl-5.2.5(Pseudomonas Aeruginosa)	-	-	-
Cl-5.2.6(Aerobic Microbial Count @ 37 deg C)	-	-	-
Cl-5.2.7(Yeast and mould)	-	-	-
Cl-5.2.8(Salmonella)	-	-	-
Cl-5.2.9(Vibrio cholera)	-	-	-
Cl-5.2.3(Faecal streptococci)	-	-	-
Cl-5.2.3(Faecal streptococci)	-	-	-
Cl-5.2.8(shigella)	-	-	-
Cl-5.2.8(shigella)	-	-	-
Cl-5.2.9(V.parahaemolyticus)	-	-	-
Cl-5.2.9(V.parahaemolyticus)	-	-	-
Cl-5.4 (i)(Pesticide residues considered individually)	-	-	-
Cl-5.4 (ii)(Total pesticide residue)	-	-	-
Cl-5.4 (ii)(Total pesticide residue)	-	-	-
5.4 i)(Dieldrin)	-	-	-
5.4 i)(Dieldrin)	-	-	-
5.4 i)(Aldrin)	-	-	-
5.4 i)(Malathion)	-	-	-
5.4, i)("oxygen analogue of Malathion (Malaoxon)")	-	-	-
5.4, i)("oxygen analogue of Malathion (Malaoxon)")	-	-	-
5.4 i)(Methyl Paraoxon)	-	-	-
5.4 i)(Methyl Paraoxon)	-	-	-
5.4 i)(Methyl Parathion)	-	-	-
5.4 i)(Methyl Parathion)	-	-	-
5.4 i)(Atrazine)	-	-	-
5.4 i)(Alachlor)	-	-	-
5.4 i)(Alachlor)	-	-	-
5.4 i)(Isoproturon)	-	-	-
5.4 i)(Isoproturon)	-	-	-
5.4 i)(Butachlor)	-	-	-
5.4 i)(Butachlor)	-	-	-
5.4 i)(2,4-D)	-	-	-
5.4 i)(Phorate sulphone)	-	-	-
5.4 i)(Phorate sulphone)	-	-	-
5.4 i)(Phorate sulphoxide)	-	-	-
5.4 i)(Phorate)	-	-	-
5.4 i)(Phorate)	-	-	-
5.4 i)(Chlorpyrifos)	-	-	-
5.4 i)(Chlorpyrifos)	-	-	-
5.4 i)(Ethion)	-	-	-
5.4 i)(Ethion)	-	-	-
5.4 i)(Monocrotophos)	-	-	-
5.4 i)(Monocrotophos)	-	-	-
5.4 i)(Endosulfan Sulphate)	-	-	-
5.4 i)(Endosulfan Sulphate)	-	-	-
5.4 i)(beta-Endosulfan)	-	-	-
5.4 i)(beta-Endosulfan)	-	-	-
5.4 i)(alpha-Endosulfan)	-	-	-
5.4 i)(alpha-Endosulfan)	-	-	-
5.4 i)(Delta-HCH)	-	-	-
5.4 i)(beta-HCH)	-	-	-
5.4 i)(alpha-HCH)	-	-	-
5.4 i)(alpha-HCH)	-	-	-
5.4 i)(Gamma-HCH (Lindane))	-	-	-
5.4 i)(Gamma-HCH (Lindane))	-	-	-
5.4 i)(p,p DDD)	-	-	-
5.4 i)(p,p DDD)	-	-	-
5.4 i)(o,p DDD)	-	-	-
5.4 i)(o,p DDD)	-	-	-
5.4 i)(p,p DDE)	-	-	-
5.4, i)(o,p DDE)	-	-	-
5.4 i)(p,p DDT)	-	-	-
5.4 i)(p,p DDT)	-	-	-
5.4 i)(o,p DDT)	-	-	-
5.4 i)(o,p DDT)	-	-	-
Table 3, x)(Uranium)	-	-	-
Table 3, x)(Uranium)	-	-	-
5.2.6(Aerobic Microbial Count @ 20 to 22 deg C)	-	-	-
5.2.6(Aerobic Microbial Count @ 20 to 22 deg C)	-	-	-

31 Mar, 2028

-
included w.e.f.20.12.2024

10215

ARDM Labs Pvt Ltd

8175706

IS 14333 (2022)

Polyethylene Pipes for Sewerage and Industrial Chemicals and Effluent ï¿½ Specification (First Revision)

Polyethylene Pipes for Sewerage and Industrial Chemical

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2.1,T2("Base Density (At 27°C Temp.)-IS 7328:2020 ")	-	750	-
5.2.1.1, T2(Compound Density-IS 7328:2020)	-	750	-
5.2.1,T2(Melt Flow Rate (At 190°C /5kg)-IS 2530:1963)	-	1500	-
5.2.1,T2(Thermal Stability(Oxidation Induction Time)-IS 4984:2016(Annexure-B))	-	2500	-
5.2.1,T2("Volatile Matter- IS 4984:2016 (Annexure-C)")	-	1500	-
5.2.1,T2("Water Content-IS 4984:2016 (Annexure-D)")	-	1000	-
6.2(Colour- IS 14333-2022)	-	250	-
7.1(Visual Appearance- IS 14333-2022)	-	500	-
7.2(Length- IS 14333-2022)	-	250	-
7.4,T3 of IS 4984(Outside Diameter-IS 4984-2016)	-	250	-
7.4,T4 of IS 4984(wall Thickness-IS 4984-2016)	-	250	-
7.4,T3 of IS 4984(Ovality-IS 4984-2016)	-	250	-
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 27 oC , Test Period - 100 hrs.-IS 4984-2016 (Annexure-E))	-	2500	-
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 48 hrs.-IS 4984-2016 (Annexure-E))	-	2500	-
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 165 hrs.-IS 4984-2016 (Annexure-E))	-	3500	-
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 1000 hrs.-IS 4984-2016 (Annexure-E))	-	8500	-
8.1.2, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 48 hrs.-IS 4984-2016 (Annexure-E))	-	2500	-
8.2("Longitudinal Reversion Test - IS 4984-2016 (Annexure-F)")	-	1500	-
8.3(Carbon black content- IS 2530-1963)	-	1500	-
8.3(Carbon black content Dispersion- IS 2530-1963)	-	1000	-
8.4(Melt Flow rate(Temperature - 190oC,Mass 5kg)-IS 2530-1963)	-	1500	-
8.5(Oxidation Induction Time -IS 4984:2016(Annexure-B))	-	2500	-
8.6(Density-IS 7328:2020)	-	1000	-
8.7("Tensile Strength for Butt Fusion - IS 4984-2016 (Annexure-G)")	-	1000	-
8.8,T5("Elongation -IS 4984-2016 (Annexure-H)")	-	1000	-
8.8,T5("Tensile - IS 4984-2016 (Annexure-H)")	-	1000	-
8.9(Slow Crack Growth Rate{Internal Pressure creep Rupture test, Temperature - 80±1 oC , Test Pressure – 0.80MPa, Test Period - 500 hrs.-IS 4984-2016 (Annexure-E &J))	-	3500	-
5.3(Density of Higher olefin - IS 7328:2020)	-	750	-
5.3(Olefin Constituents- 14333-2022)	-	1000	-
5.3(Loading of Carbon Black - IS 2530:1963)	-	1000	-
5.2.1.1, T2("Compound carbon black -IS 2530:1963 dispersion")	-	1000	-
5.2.1.1, T2(Compound ash content - Any Method)	-	1000	-
5.4(Antioxidant - Any Method)	-	1000	-
5.3(Toluene extract - Any Method)	-	1500	-
5.2.1.1, T2("Compound carbon black -IS 2530:1963 content")	-	1500	-
5.2.1.1, T2(Compound Toluene extract - Any Method)	-	1500	-
5.2.1.1, T2(Compound maximum volatile matter -IS 4984:2016 (Annexure-C))	-	1500	-
5.2.1.1, T2(Compound carbon black particle size- Any Method)	-	1500	-
5.3(Ash content- Any Method)	-	1500	-
5.3("Maximum volatile matter -IS 4984:2016 (Annexure-C)")	-	1500	-
5.3(Carbon black particle size - Any Method)	-	1500	-
6(Pipe Description - IS 14333-2022)	-	500	-
7.3(Coiling- IS 14333-2022)	-	500	-

11 Jan, 2027

-
Up to & Including 630mm

10216

MARQUIS TECHNOLOGIES PRIVATE LIMITED, NOIDA

8175126

IS 16242 : Part 1 (2014)

Uninterruptible power systems (UPS): Part 1 general and safety requirements for UPS

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.5(Components)	-	2000	-
4.6(Power interface)	-	3000	-
4.7(Marking & instructions)	-	2000	-
5.1(Protection against shock and energy hazards)	-	3000	-
5.2(Requirement of auxiliary circuits)	-	2000	-
5.3(Protective earthing and bonding)	-	2000	-
5.4(AC and DC power isolation)	-	4000	-
5.5(Over current and earth fault condition)	-	3000	-
5.6(Safety interlocks)	-	4000	-
5.7(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	4000	-
6.1(Wiring, connections and supply)	-	3000	-
6.2(Connection to power)	-	3000	-
6.3(Wiring terminals for external power conductors)	-	3000	-
7.1(Enclosure)	-	2000	-
7.2(STABILITY)	-	2000	-
7.3(MECHANICAL STRENGTH)	-	5000	-
7.4(Construction details)	-	5000	-
7.5(Resistance to fire)	-	5000	-
7.6(Battery location)	-	2000	-
7.7(Temperature rise)	-	5000	-
8.1(General procision for earth leakage)	-	5000	-
8.2(Electric Strength)	-	5000	-
8.3(Abnormal operating and fault conditions)	-	5000	-
9.0(Connection to telecommunication networks)	-	10000	-

13 Dec, 2026

-
Exclusion: Cl. 4.5/RD 1.5 (Components), Cl. 2.10.5.4 (Semiconductor devices), Cl. 2.10.5.13 (Winding wires), Cl. 2.10.5.11 (SMPS/Main transformer), Cl. 2.10.6 (PCB Material), Annex I.5 (Solid-state backfeed protection), Cl.I.5 (transient overvoltages, voltage variations, electromagnetic susceptibility, electrostatic discharge)

10217

ARDM Labs Pvt Ltd

8175706

IS 4985 (2021)

UNPLASTICIZED PVC PIPES FOR POTABLE WATER SUPPLIES SPECIFICATION Fourth Revision

Unplasticized PVC Pipes for Water Supplies

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(CLASSIFICATION OF PIPES)	-	250	-
6.1.2(PVC Resin)	-	2500	-
6.1.1(VCM Content)	-	2000	-
Cl-7.1(Mean out side Diameter (For less than or equal to 40 mm- Average of 8 , For higher diameters up to 110 mm average of 6))	-	500	-
10.1(Colour)	-	250	-
11.2(Resistance to External Blows at 0°C)	-	2500	-
10.3(Effect on Water Test)	-	4000	-
10.7(Sulphated Ash Content)	-	1500	-
9.1(PIPE ENDS)	-	250	-
10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-	1000	-
7.1.4(Length)	-	250	-
10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity)	-	1000	-
8(SEALING RINGS)	-	500	-
10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-	1500	-
10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-	1500	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum))	-	500	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Mamimum))	-	500	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. Variation)	-	500	-
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Minimum))	-	500	-
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Maximum))	-	500	-
7.1.2.1(DIMENSIONS-PIPE-Thickness(Maximum))	-	500	-
7.1.2.1(DIMENSIONS-PIPE-Thickness(Minimum))	-	500	-
7.1.2.1(DIMENSIONS-PIPE-Average Thickness)	-	500	-
7.1.1.2(DIMENSIONS-PIPE-Ovality (Maximum))	-	500	-
Cl- 7.2(Socket length (Take 4 reading & minimum will be reported))	-	250	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Minimum Length)	-	500	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Minimum))	-	250	-
7.2.1.2(a)-Table 5(DIMENSIONS-Sockets for elastomeric sealing ring joints-Minimum depth of engagement)	-	250	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Maximum))	-	250	-
10.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	250	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test))	-	12000	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test))	-	3500	-
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)-for Integral Sealing Ring Sockets)	-	10000	-
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Integral Sealing Ring Sockets)	-	2500	-
11.1.1(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Plumbing pipes)	-	2500	-
10.1(Surface Finish)	-	250	-
7.2.1.1 Table3(Angle of taper (Note-1))	-	250	-
7.2.1.2b(Maximum inner diameter of groove)	-	500	-
13.1(Marking)	-	250	-
7.1.3(mean outside diameter, outside diameter at any point, and wall thickness of plumbing pipes)	-	250	-
7.2.1.2-Table 4(DIMENSIONS-Sockets for elastomeric sealing ring joints-Socket inner Diameter)	-	250	-
10.1.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	0	-
7.2.1(DIMENSIONS-Socket)	-	0	-

11 Jan, 2027

-
Up to & Including 630mm

10218

ARDM Labs Pvt Ltd

8175706

IS 4984 (2016)

Polyethylene pipes for water supply - Specification (Fifth Revision)

Polyethylene Pipes for Water Supply

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.7(Density)	-	1000	-
6.2.1(6.1.1 Identification Stripes)	-	500	-
6.2(Colour)	-	500	-
Clause 7.1(Visual Apperance)	-	500	-
7.2(Length)	-	500	-
7.3(Coiling)	-	0	NA
Cl-7.4(Mean Outside Diameter (For upto 50 mm take 8 reading, above 50mm take 6 reading & average will be reported))	-	1000	-
7.4.1.2(Ovality)	-	500	-
8.1.2 table -5(Internal Pressure Creep Rupture Test of Pipe Joints)	-	2500	-
8,/8.1/8.1.1 table-5(PERFORMANCE REQUIREMENTS / Hydraulic Characteristics/ Internal Pressure Creep Rupture Test of Pipe)	-	20000	-
8.2(Longitudinal Reversion Test)	-	1500	-
8.3(Carbon black)	-	1500	-
Cl. 8.3(Carbon Black Dispersion)	-	1500	-
8.4( Melt Flow Rate)	-	1500	-
8.5 (Oxidation Induction Time)	-	1500	-
8.6(Overall migration)	-	2500	-
8.8(Tensile Strength for Butt-fusion)	-	1500	-
8.9 table-6(Elongation at Break)	-	1500	-
8.10(Slow Crack Growth Rate)	-	2500	-
5.2(Polyethylene Resin)	-	1500	-
5.2(Density)	-	1000	-
5.2(MFI @ 1900C/5.0 Kg)	-	1500	-
5.2(Volatile matter Content)	-	1000	-
5.3(Toluene Extract)	-	1000	-
5.3 (a)(Carbon Black Master Batch)	-	1000	-
5.3(b)(Carbon Black Master Batch)	-	1000	-
5.3(c)(Carbon Black Master Batch)	-	1000	-
5.3(d)(Carbon Black Master Batch)	-	1000	-
5.3(e)(Carbon Black Master Batch)	-	1000	-
5.4(Anti oxydent)	-	2500	-
7.1(Visual Appearance)	-	0	-
8.9,T6("Tensile - IS 4984-2016 (Annexure-H)")	-	1500	-
8.9,T6("Elongation -IS 4984-2016 (Annexure-H)")	-	0	-
5.2,T2(Melt Flow rate(Temperature - 190oC,Mass 5kg)-IS 2530-1963)	-	1500	-
6, 6.1(PIPE DESCRIPTION)	-	0	-
6, 6.1.1(PIPE DESCRIPTION)	-	0	-
6, 6.1.2(PIPE DESCRIPTION)	-	0	-
6.1.3 (PIPE DESCRIPTION)	-	0	-
6.1.4(PIPE DESCRIPTION)	-	0	-
5, 5.1 table-1(MATERIALS)	-	1000	-
Clause 8.3(Carbon Black Dispersion)	-	0	-
Clause 8.3(Carbon Black content)	-	0	-
Clause 8.6(Overall migration (stimulate))	-	0	-
Clause 8.6(Overall migration (surface of material))	-	0	-
Table-2 (iii, iv)(Thermal Stability (Oxidation Induction Time), Volatile Matter)	-	0	-
Cl. 8.3(Carbon Black Content)	-	0	-
8.7(Density-IS 7328:2020)	-	0	-
8.7(Corrected Density- IS 7328:2020)	-	0	-
Cl 8.3(Carbon Black Content)	-	0	-
Cl 8.3(Carbon Black Dispersion)	-	0	-
Clause 7.3(Coiling)	-	0	-

11 Jan, 2027

-
Up to & Including 630mm

10219

THE SOUTH INDIA TEXTILE RESEARCH ASSOCIATION (SITRA), COIMBATORE

6165234

IS 12171 (2019)

Cotton bales – Specification (third revision)

3500 View breakup
-

Clause No.	Exclusion	Remark
5.1.1(Staple Length)	-	The complete testing charges for the full package is given as Rs.3500 plus 18% GST. Individual testing charges are not mentioned.
5.1.2(Trash Content)	-	The complete testing charges for the full package is given as Rs.3500 plus 18% GST. Individual testing charges are not mentioned.
5.1.3(Moisture Content)	-	The complete testing charges for the full package is given as Rs.3500 plus 18% GST. Individual testing charges are not mentioned.
5.1.4(Strength of Fibre)	-	The complete testing charges for the full package is given as Rs.3500 plus 18% GST. Individual testing charges are not mentioned.
5.1.5(Micronaire Value)	-	The complete testing charges for the full package is given as Rs.3500 plus 18% GST. Individual testing charges are not mentioned.
5.2.3.1(a) Cotton fabric)	-	The complete testing charges for the full package is given as Rs.3500 plus 18% GST. Individual testing charges are not mentioned.
5.2.1(Dimensions)	-	The complete testing charges for the full package is given as Rs.3500 plus 18% GST. Individual testing charges are not mentioned.
5.2.2(Mass (Weight))	-	The complete testing charges for the full package is given as Rs.3500 plus 18% GST. Individual testing charges are not mentioned.
5.2.3.1(b) Baling hoops)	-	The complete testing charges for the full package is given as Rs.3500 plus 18% GST. Individual testing charges are not mentioned.
5.2.3.1(c) Cotton twine)	-	The complete testing charges for the full package is given as Rs.3500 plus 18% GST. Individual testing charges are not mentioned.
5.1.1(Staple Length)	-	The complete testing charges for the full package is given as Rs.3500 plus 18% GST. Individual testing charges are not mentioned.
5.1.2(Trash Content)	-	The complete testing charges for the full package is given as Rs.3500 plus 18% GST. Individual testing charges are not mentioned.
5.1.3(Moisture Content)	-	The complete testing charges for the full package is given as Rs.3500 plus 18% GST. Individual testing charges are not mentioned.
5.1.4(Strength of Fibre)	-	The complete testing charges for the full package is given as Rs.3500 plus 18% GST. Individual testing charges are not mentioned.
5.1.5(Micronaire Value)	-	The complete testing charges for the full package is given as Rs.3500 plus 18% GST. Individual testing charges are not mentioned.
5.2.3.1(a) Cotton fabric)	-	The complete testing charges for the full package is given as Rs.3500 plus 18% GST. Individual testing charges are not mentioned.
5.2.1(Dimensions)	-	The complete testing charges for the full package is given as Rs.3500 plus 18% GST. Individual testing charges are not mentioned.
5.2.2(Mass (Weight))	-	The complete testing charges for the full package is given as Rs.3500 plus 18% GST. Individual testing charges are not mentioned.
5.2.3.1(b) Baling hoops)	-	The complete testing charges for the full package is given as Rs.3500 plus 18% GST. Individual testing charges are not mentioned.
5.2.3.1(c) Cotton twine)	-	The complete testing charges for the full package is given as Rs.3500 plus 18% GST. Individual testing charges are not mentioned.

-
-

10220

MARQUIS TECHNOLOGIES PRIVATE LIMITED, NOIDA

8175126

IS 616 (2017)

Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision)

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking and instructions)	-	2000	-
7(Heating under normal operating conditions)	-	4000	-
15(TERMINALS)	-	2000	-
16(External flexible cords)	-	3000	-
17(Electrical connections and mechanical fixings)	-	2000	-
19(Stability and mechanical hazards)	-	2000	-
20(Resistance to fire)	-	10000	-
8(Constructional requirements with regard to the protection against electric shock)	-	5000	-
9(Electric shock hazard under normal operating conditions)	-	5000	-
10(Insulation requirements)	-	8000	-
11(Fault conditions)	-	5000	-
12(Mechanical strength)	-	5000	-
13(CLEARANCES and CREEPAGE DISTANCES)	-	6000	-
8.16/ H 2.2/ H 2.3(Requirements for insulated winding wires for use without additional interleaved insulation)	-	2000	-
8.16(Wound Component)	-	2000	-
3(General requirements)	-	2000	-
4(General test conditions)	-	2000	-
Annex-A(Additional requirements for apparatus with protection against splashing water)	-	2000	-
Annex-B(Apparatus to be connected to the TELECOMMUNICATION NETWORKS)	-	2000	-

13 Dec, 2026

-
Exclusion: Cl. 6 (Hazardous radiations), Cl. 14 (Components), Cl. 18 (Mechanical strength of picture tubes and protection against the effects of implosion), Cl. 6.1 (Ionizing radiation), Cl. 6.2 (Laser Radiation), Cl. Cl.8.16 of Cl.8 (Insulated winding wire without additional interleaved insulation), Cl. 8.16/ H 2.2/ H 2.3 (Requirements for insulated winding wires for use without additional interleaved insulation), Cl. Cl.8.16 of Cl.8 (Insulated winding wire without additional interleaved insulation), Cl. 14 (Components), Cl. 20.2.4 (Printed Boards)

10221

Central Power Research Institute (CPRI), Bangalore

6101024

IS 16270 (2014)

Secondary cells and batteries for solar photovoltaic application - General requirements and methods of test

413700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1(Capacity test)	-	26400	The test charge for capacity test for 6 batteries is 19,200rs and battery charging for 8 batteries for 7,200rs. The total amount is 26,400rs .
5.4(Marking)	-	4400	The test charge for Marking test for 8 batteries is 4,400rs.
8.2(Endurance test)	-	170300	The test charge for Endurance test for 2 batteries is 1,70,300rs.
8.3(Charge retention test)	-	24000	The test charge for Charge retention test for 2 batteries is 24,000rs.
8.4(Cycle endurance in Photovoltaic application)	-	161200	The test charge for Cycle endurance test for 2 batteries is 1,61,200rs.
8.5(Sulphation Test)	-	11700	The test charge for Sulphation test for 2 batteries is 11,700rs.
8.6(Water loss test)	-	15700	The test charge for Water loss test for 2 batteries is 15,700rs.
8.7(Non spillability)	-	0	The test is not applicable

31 Dec, 2026

-
Included w.e.f 16.05.2024

10222

Atharva Laboratories Pvt. Ltd. (C-54), Noida

8165026

IS 16046 : Part 2 (2018)

Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes ” Safety Requirements for Portable Sealed Secondary Cells and for Batteries Made from Them for Use in Portable Applications Part 2 Lithium Systems ( Second Revision )

80000 View breakup
Rs.80,000/- [10% discount to BIS]

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Parameter Measurement Tolerances)	-	1000	Ok
5(General Safety Considerations)	-	1000	Ok
5.1(General)	-	1000	Ok
5.2(Insulation and Wiring)	-	1000	Ok
5.3(Venting)	-	2000	Ok
5.4(Temperature, Voltage and Current Management)	-	2000	Ok
5.5(Terminal Contacts)	-	2000	Ok
5.6(Assembly of Cells into batteries)	-	2000	Ok
5.7(Quality Plan)	-	2000	Ok
5.8(Battery Safety Components)	-	2000	Ok
6(Type Test and Sample Size)	-	1000	Ok
7(Specific requirements and tests)	-	5000	Ok
7.1(Charging procedure for test purposes)	-	5000	Ok
7.2(Intended Use)	-	19000	Ok
7.3(Reasonably foreseeable misuse)	-	21000	Ok
8(Information for safety)	-	3000	Ok
8.1(General)	-	500	Ok
8.2(Small Cell and battery safety information)	-	500	Ok
9(Marking)	-	500	Ok
9.1(Cell Marking)	-	500	Ok
9.2(Battery Marking)	-	1000	Ok
9.3(Caution for ingestion of small cells and batteries)	-	2000	Ok
9.4(Other information)	-	2000	Ok
10(Packaging)	-	2000	Ok

23 Feb, 2029

-
REVISED VERSION INCLUDED w.e.f. 02.04.2019.

10223

Atharva Laboratories Pvt. Ltd. (C-54), Noida

8165026

IS 16046 : Part 1 (2018)

80000 View breakup
Rs.80,000/- [10% discount to BIS]

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Parameter Measurement Tolerances)	-	1500	Ok
5(General Safety Considerations)	-	500	Ok
5.1(General)	-	1000	Ok
5.2(Insulation and Wiring)	-	2000	Ok
5.3(Venting)	-	2000	Ok
5.4(Temperature, Voltage and Current Management)	-	2000	Ok
5.5(Terminal Contacts)	-	500	Ok
5.6(Assembly of Cells into batteries)	-	2000	Ok
5.7(Quality Plan)	-	500	Ok
6(Tyoe Test amd Sample Size)	-	1500	Ok
7(Specific requirements and tests)	-	2000	Ok
7.1(Charging procedure for test purposes)	-	2000	Ok
7.2(Intended Use)	-	32500	Ok
7.3(Reasonably foreseeable misuse)	-	21000	Ok
8(Information for safety)	-	1000	Ok
8.1(General)	-	1000	Ok
8.2(Small Cell and battery safety information)	-	1000	Ok
9(Marking)	-	1000	Ok
9.1(Cell Marking)	-	1000	Ok
9.2(Battery Marking)	-	1000	Ok
9.3(Caution for ingestion of small cells and batteries)	-	1000	Ok
9.4(Other information)	-	1000	Ok
10(Packaging)	-	1000	Ok

23 Feb, 2029

-
REVISED VERSION INCLUDED w.e.f. 02.04.2019.

10224

Atharva Laboratories Pvt. Ltd. (C-54), Noida

8165026

IS 13252 : Part 1 (2010)

Information technology equipment - Safety: Part 1 general requirements (Second Revision)

52000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1.5(Components)	-	0	N/A
1.6(Power interface .)	-	5900	Cl.1.6 Power interface & Cl.1.6.1 AC Power Distribution System 500 Cl.1.6.2 Input Current 5000 Cl.1.6.3 Voltage limit of hand-held Equipment 200 Cl.1.6.4 Neutral Conductor 200
1.7(Markings and instructions)	-	1100	i) Cl.1.7 to xv) Cl.1.7.14
2.1(Protection from electric shock and energy hazards)	-	2400	Cl. 2 to Cl.2.1.3
2.2(SELV circuits)	-	200	Cl.2.2, Cl.2.2.1, Cl.2.2.2, Cl.2.2.3, & Cl.2.2.4, SELV Circuits 200
2.3(TNV circuits)	-	200	N/A
2.4(Limited current circuits)	-	1000	Cl.2.4, Cl.2.4.1, Cl.2.4.2, & Cl.2.4.3, Limited Current circuits 1000
2.5(Limited power sources .)	-	1000	Cl.2.5, Limited power sources 1000
2.6(Provisions for earthing and bonding)	-	3200	Cl.2.6 to Cl.2.6.5.8
2.7(Overcurrent and earth fault protection in primary circuits)	-	1400	Cl.2.7 to Cl.2.7.6
2.8(Safety interlocks)	-	200	N/A
2.9(Electrical insulation)	-	800	Cl.2.9 Electric insulation 200 Cl.2.9.1 & Cl.2.9.2 Properties of Insulating materials, Humidity Conditioning. 200 Cl.2.9.3 Grade of insulation 200 Cl.2.9.4 Separation from Hazardous voltages 200
2.10(Clearances, creepage distances and distances through insulation)	-	5800	Cl.2.10 to Cl.2.10.10
3.1(General)	-	1400	Cl.3,Cl.3.1,Cl.3.1.1,&Cl.3.1.1 to Cl.3.1.10
3.2(Connection to a mains supply)	-	1600	Cl. 3.2, Cl.3.2.1,& Cl.3.2..1.1,Cl.3.2.1.2 to Cl.3.2.9
3.3(Wiring terminals for connection of external conductors)	-	600	Cl.3.3 to Cl.3.3.8
3.4(Disconnection from the mains supply)	-	200	Cl.3.4 , Disconnection from the mains supply 200
3.5(Interconnection of equipment)	-	200	Cl.3.5 Interconnection of Equipments 200
4.1(Stability)	-	200	Cl.4 Physical Requirements, Cl.4.1 Stability 200
4.2(Mechanical strength)	-	1000	Cl.4.2 to Cl.4.2.10
4.3(Design and construction)	-	1400	Cl.4.3 to Cl.4.3.13.5
4.4(Protection against hazardous moving parts)	-	200	Cl.4.4 Protection against Hazardous Moving Parts 200
4.5(Thermal requirements)	-	400	Cl.4.5 Cl.4.5.1 Cl.4.5.2 Cl.4.5.3 Cl.4.5. Thermal Requirements General Temperature Test Temperature limits for Materials 4 Touch Temperature Limits 200 Cl.4.5.5 Resistance to abnormal Heat 200
4.6(Openings in enclosures)	-	600	Cl.4.6,Cl.4.6.1, & Cl.4.6.3 Openings in enclosures 200 Cl.4.6.4 Openings in transportable equipment 200 Cl.4.6.5 Adhesives for constructional purposes 200
4.7(Resistance to fire)	-	1800	Cl.4.7 to Cl.4.7.3.6
5.1(Touch current and protective conductor curren)	-	200	Cl.5, & Cl.5.1 Electrical Requirements and simulated abnormal conditions & Touch current and protective conductor current & Annex D 200
5.2(Electric strength)	-	1000	Cl.5.2 Electric Strength Test 1000
5.3(Abnormal operating and fault conditions)	-	1200	Cl.5.3, Cl.5.3.1 to Cl.5.3.9.2
6.1(Protection of telecommunication network service persons, and users of other equipment connected to the network, from hazards in the equipment)	-	2500	Cl.6.0 to Cl.6.1.2.2
6.2(Protection of equipment users from overvoltages on networks telecommunication)	-	600	Cl.6.2 to Cl.6.2.2.2 & Cl.6.2.2.3
6.3(Protection of the telecommunication wiring system from overheating)	-	200	Cl.6.3 Protection of the telecommunication wiring system from overheating 200
7.1(General)	-	200	Cl.7,& Cl.7.1 Connection to cable distribution system,& General 200
7.2(Protection of cable distribution system service persons, and users of other equipment connected to the system, from hazardous voltages in the equipment)	-	200	Cl.7.2 Protection of cable distribution system service persons, and user of other equipment connected to the system ,from hazardous voltage in the equipment 200
7.3(Protection of equipment users from overvoltages on the cable distribution system)	-	200	Cl.7.3 Protection of equipment users from over voltages on the cable distribution system 200
7.4(Insulation between primary circuits and cable distribution systems)	-	400	Cl.7.4 & Cl.7.4.1 Insulation between primary circuits and cable distribution system and General 200 Cl.7.4.2 Voltage Surge Test 200 Cl.7.4.3 Impulse Test 200
4.2.8(Cathode Ray Tubes)	-	100	Ok
4.3.10(Dust, powders, liquids and gases)	-	100	Ok
4.3.11(Containers for liquids or gases)	-	100	Ok
4.3.12(Flammable liquids)	-	100	Ok
4.6.2(Bottoms of fire enclosures)	-	100	Ok

23 Feb, 2029

-
-

10225

Atharva Laboratories Pvt. Ltd. (C-54), Noida

8165026

IS 616 (2017)

Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision)

65000 View breakup
Plasma/ LCD/ LED TV of screen size 32” & above upto 105", Plasma/ LCD/ LED TV of screen size up to 32”. Rs.50,000/- for Electronic games (Video), Power Adaptors for audio, video & similar electronic apparatus. ADDITIONAL PRODUCTS INCLUDED W.E.F. 17-07-2020-Rs. 45000/- for wireless headphone & Earphone, Television other than plasma/LCD/LED/TVS. ADDITIONAL PRODUCT FOR PHASE V INCLUDED W.E.F. 20-11-2020: Rs. 45,000/- for Wireless Microphone, Webcam (Finished Products), Smart Speaker (With and without display), Bluetooth Speakers, Video Camera

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking and instructions)	-	2000	Cl.5 Marking and Instructions 500 Cl.5.1 Identification and supply ratings 500 Cl.5.2 Terminals 500 Cl.5.3 to Cl.5.5 Instructions 500
7(Heating under normal operating conditions)	-	3000	Cl.7 & Cl.7.1 Heating under Normal operating Conditions & General 500 Cl.7.2 Heat resistance of insulating material 500
8(Constructional requirements with regard to the protection against electric shock)	-	5000	Cl.8 & Cl.8.1 to Cl.8.21
9(Electric shock hazard under normal operating conditions)	-	4000	Cl.9 ,cl.9.1 & Cl.9.1.2 to Cl.9.2
10(Insulation requirements)	-	3000	Cl.10 & Cl.10.1 Insulation requirements 500 Cl.10.2 Surge test 500 10.3 Humidity treatment 500 Cl.10.4 Insulation resistance and dielectric strength 500
11(Fault conditions)	-	3000	Cl.11 Fault conditions 500 Cl.11.1 Electric shock hazard 500 Cl.11.2 Heating 500 x 3=1500
12(Mechanical strength)	-	6000	Cl.12 to Cl.12.1.3 & Cl.12.6 , Cl.12.7
13(CLEARANCES and CREEPAGE DISTANCES)	-	5000	Cl.13 & Cl.13.1 to Cl.13.7
14(Components)	-	500	Cl.14 Components 500
15(TERMINALS)	-	2500	Cl.15 Terminals 500 Cl.15.1 Plug & Sockets 500 Cl.15.2 Provisions for protective earthling 500 Cl.15.3 Terminals for external flexible cords and for permanent connection to the mains 500 Cl.15.4 Device forming a part of mains plug 500
16(External flexible cords)	-	1000	Cl.16 External Flexible cords 500
17(Electrical connections and mechanical fixings)	-	2500	Cl.17 & Cl.17.1 Electrical connections and mechanical fixings 500 Cl.17.2 500 Cl.17.3 500 Cl.17.4,Cl.17.5, Cl.17.6 500 Cl.17.7,Cl.17.8, Cl.17.9 500
18(Mechanical strength of picture tubes and protection against the effects of implosion)	-	1000	Cl.18 Mechanical Strength of picture tubes and protection against the effect of implosion 500
19(Stability and mechanical hazards)	-	2500	Cl.19 Stability and mechanical hazards 2500
20(Resistance to fire)	-	3000	CL.20 Resistance to fire, Electrical Components and mechanical parts, Fire enclosure 2500
4(General test conditions)	-	1000	OK

23 Feb, 2029

-
Excluding: Hazardous Radiation (Cl.6), Requirements for Insulating winding wires for use without additional interleaved insulation (Cl.8.16) (Annex-H), Printed Boards (Cl.13.5), Components (Cl.14), Cord Bend Test [Cl.16.3 (b)], Mechanical strength of picture tubes and protection against the effects of implosion (Cl.18), Electrical components & mechanical parts (Cl.20.2).

10226

LANDMARK MATERIAL TESTING AND RESEARCH LABORATORY PVT LTD, JAIPUR

8182036

IS 16090 (2013)

Geo-synthetics – Geo-textiles used as protection (or cushioning) materials – Specification

160550 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.4, Table 1, (i)(Mass per unit area, g/m2)	-	500	-
4.4, Table 1, (ii)(Tensile strength, kN/m)	-	4600	-
4.4, Table 1, (iii)(Trapezoidal tear strength, kN)	-	1850	-
4.5, Table 1, (iv)(CBR puncture resistance, kN)	-	3600	-
4.6, Table 1, (v)(Maximum UV resistance (after 500 h exposure), percent)	-	150000	-

27 Oct, 2027

-
-

10227

Electrical Research and Development Association (ERDA), Vadodara, Gujarat

7101125

IS 648 (2022)

Cold rolled non-oriented electrical steel sheet and strip - Fully processed type - Specification Sixth Revision

All Grades as Per Table-1

36535 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. No. 6.3.2(Adherence test for CRNO strips)	-	575	Adherence for CRNO Strips
Cl. No. 7.1.1.1 & Table-1(AC Magnetization for CRNO Strips)	-	4695	A.C. Magnetization for CRNO Strips (At 2500, 5000 & 10000 AT/m)
Cl. No. 7.1.2.1 , 7.1.2.2 & Table-1(Specific Core Loss Measurement with Annealing & with Ageing for CRNO strips)	-	11290	Specific Core Loss (At 1.0 T & 1.5 T) With Annealing & With Ageing
Cl. No. 7.1.2.1 & Table-1(Specific Core Loss Measurement without Annealing & with Ageing for CRNO strips)	-	9620	Specific Core Loss (At 1.0 T & 1.5 T) Without Annealing & With Ageing
Cl. No. 7.1.2.1 & Table-1(Specific Core Loss Measurement without Annealing & without Ageing for CRNO strips)	-	2030	Specific Core Loss (At 1.0 T & 1.5 T) Without Annealing & Without Ageing
Cl. No. 7.1.2.3 & Table-1(Anisotropy of Losses for CRNO Strips)	-	2185	Anisotropy of Losses for CRNO strips
Cl. No. 7.2.5(Surface Insulation Resistivity for CRNO Strips)	-	2230	Surface Insulation Resistivity for CRNO Strips
Cl. No. 7.2.6(Thermal Effect on Coating for CRNO Strips)	-	11385	Thermal Effect on Coating for CRNO Strips
Cl. No. 9.1 &Table-1(Stacking Factor for CRNO Strips)	-	575	Stacking Factor for CRNO Strips
Cl. No. 9.2 & Table-1(Ductility (Bend test) for CRNO Strips)	-	575	Ductility (Bend Test) for CRNO Strips
Cl. No. 7.2.7(Resistance to Solvent for CRNO Strips)	-	2450	Resistance to Solvents for CRNO Strips
Cl. No. 8.1(Thickness for CRNO Strips)	-	575	Lamination Thickness for CRNO Strips
Cl. No. 6.3.2(Adherence test for CRNO strips)	-	575	Adherence for CRNO Strips
Cl. No. 7.1.1.1 & Table-1(AC Magnetization for CRNO Strips)	-	4695	A.C. Magnetization for CRNO Strips (At 2500, 5000 & 10000 AT/m)
Cl. No. 7.1.2.1 , 7.1.2.2 & Table-1(Specific Core Loss Measurement with Annealing & with Ageing for CRNO strips)	-	11290	Specific Core Loss (At 1.0 T & 1.5 T) With Annealing & With Ageing
Cl. No. 7.1.2.1 & Table-1(Specific Core Loss Measurement without Annealing & with Ageing for CRNO strips)	-	9620	Specific Core Loss (At 1.0 T & 1.5 T) Without Annealing & With Ageing
Cl. No. 7.1.2.1 & Table-1(Specific Core Loss Measurement without Annealing & without Ageing for CRNO strips)	-	2030	Specific Core Loss (At 1.0 T & 1.5 T) Without Annealing & Without Ageing
Cl. No. 7.1.2.3 & Table-1(Anisotropy of Losses for CRNO Strips)	-	2185	Anisotropy of Losses for CRNO strips
Cl. No. 7.2.5(Surface Insulation Resistivity for CRNO Strips)	-	2230	Surface Insulation Resistivity for CRNO Strips
Cl. No. 7.2.6(Thermal Effect on Coating for CRNO Strips)	-	11385	Thermal Effect on Coating for CRNO Strips
Cl. No. 9.1 &Table-1(Stacking Factor for CRNO Strips)	-	575	Stacking Factor for CRNO Strips
Cl. No. 9.2 & Table-1(Ductility (Bend test) for CRNO Strips)	-	575	Ductility for CRNO Strips
Cl. No. 7.2.7(Resistance to Solvent for CRNO Strips)	-	2450	Resistance to Solvents for CRNO Strips
Cl. No. 8.1(Thickness for CRNO Strips)	-	575	Lamination Thickness for CRNO Strips
Cl. No. 6.3.2(Adherence test for CRNO strips)	-	575	Adherence for CRNO Strips
Cl. No. 7.1.1.1 & Table-1(AC Magnetization for CRNO Strips)	-	4695	A.C. Magnetization for CRNO Strips (At 2500, 5000 & 10000 AT/m)
Cl. No. 7.1.2.1 , 7.1.2.2 & Table-1(Specific Core Loss Measurement with Annealing & with Ageing for CRNO strips)	-	11290	Specific Core Loss (At 1.0 T & 1.5 T) With Annealing & With Ageing
Cl. No. 7.1.2.1 & Table-1(Specific Core Loss Measurement without Annealing & with Ageing for CRNO strips)	-	9620	Specific Core Loss (At 1.0 T & 1.5 T) Without Annealing & With Ageing
Cl. No. 7.1.2.1 & Table-1(Specific Core Loss Measurement without Annealing & without Ageing for CRNO strips)	-	2030	Specific Core Loss (At 1.0 T & 1.5 T) Without Annealing & Without Ageing
Cl. No. 7.1.2.3 & Table-1(Anisotropy of Losses for CRNO Strips)	-	2185	Anisotropy of Losses for CRNO strips
Cl. No. 7.2.5(Surface Insulation Resistivity for CRNO Strips)	-	2230	Surface Insulation Resistivity for CRNO Strips
Cl. No. 7.2.6(Thermal Effect on Coating for CRNO Strips)	-	11385	Thermal Effect on Coating for CRNO Strips
Cl. No. 9.1 &Table-1(Stacking Factor for CRNO Strips)	-	575	Stacking Factor for CRNO Strips
Cl. No. 9.2 & Table-1(Ductility (Bend test) for CRNO Strips)	-	575	Ductility for CRNO Strips
Cl. No. 7.2.7(Resistance to Solvent for CRNO Strips)	-	2450	Resistance to Solvents for CRNO Strips
Cl. No. 8.1(Thickness for CRNO Strips)	-	575	Lamination Thickness for CRNO Strips

30 Nov, 2028

-
Included w.e.f. 05.12.2023. Exclusion: Cl. No. 8.3 (Length Tolerance for CRNO strips), Cl. No. 8.5 (Tolerance on shape for CRNO strips), Cl. No. 8.6 (Flatness (Wavefactor) for CRNO strips), Cl. No. 8.2 (Width Tolerance for CRNO strips), Cl. No. 8.4 (Size Tolerance on size for CRNO strips)

10228

MARQUIS TECHNOLOGIES PRIVATE LIMITED, NOIDA

8175126

IS 13252 : Part 1 (2010)

Information technology equipment - Safety: Part 1 general requirements (Second Revision)

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1.6(Power interface .)	-	2000	-
1.7(Markings and instructions)	-	2000	-
2.1(Protection from electric shock and energy hazards)	-	2000	-
2.2(SELV circuits)	-	2000	-
2.3(TNV circuits)	-	5000	-
2.4(Limited current circuits)	-	5000	-
2.5(Limited power sources .)	-	5000	-
2.6(Provisions for earthing and bonding)	-	5000	-
2.7(Overcurrent and earth fault protection in primary circuits)	-	5000	-
2.8(Safety interlocks)	-	5000	-
2.9(Electrical insulation)	-	5000	-
2.10(Clearances, creepage distances and distances through insulation)	-	5000	-
3.1(General)	-	1000	-
3.2(Connection to a mains supply)	-	2000	-
3.3(Wiring terminals for connection of external conductors)	-	2000	-
3.5(Interconnection of equipment)	-	2000	-
4.1(Stability)	-	2000	-
4.2(Mechanical strength)	-	2000	-
4.3(Design and construction)	-	2000	-
4.4(Protection against hazardous moving parts)	-	3000	-
4.5(Thermal requirements)	-	5000	-
4.6(Openings in enclosures)	-	2000	-
4.7(Resistance to fire)	-	5000	-
5.1(Touch current and protective conductor curren)	-	2000	-
5.2(Electric strength)	-	5000	-
5.3(Abnormal operating and fault conditions)	-	5000	-
6.1(Protection of telecommunication network service persons, and users of other equipment connected to the network, from hazards in the equipment)	-	5000	-
6.2(Protection of equipment users from overvoltages on networks telecommunication)	-	5000	-
6.3(Protection of the telecommunication wiring system from overheating)	-	5000	-
7.3(Protection of equipment users from overvoltages on the cable distribution system)	-	5000	-
7.4(Insulation between primary circuits and cable distribution systems)	-	2000	-
Annex A3(Hot flaming oil test)	-	5000	-
Annex K(Thermal Control)	-	5000	-
Annex B(Motor tests under abnormal conditions)	-	5000	-
Annex C(Transformers)	-	2000	-
Annex DD(Requirements for the mounting means of a rack mounted equipment)	-	2000	-
Annex EE(Household and home/ office document/ media shredders)	-	1000	-
7.1(General)	-	1000	-
7.2(Protection of cable distribution system service persons, and users of other equipment connected to the system, from hazardous voltages in the equipment)	-	1000	-
Annex CC(Evaluation of integrated circuit (IC) current limiters)	-	5000	-

13 Dec, 2026

-
Exclusion: Cl. 1.5 (Components), Cl. 2.10.5.4 (Opto-coupler), Cl. 2.10.11 (Tests for semiconductor devices and for cemented joints), Cl. 4.2.8 (Cathode Ray Tubes), Cl. 4.3.13.2 (Ionizing radiation), Cl. 4.3.13.3/ Annex Y (Effect of UV radiation on material/Ultraviolet conditioning test), Cl. 4.3.13.4 (Human exposure to ultraviolet (UV) radiation), Annex U (Insulating winding wires for use without interleaved insulation), 2.10.5.4 (Opto-coupler), Cl.2.10.5.11 (SMPS Transformer and Inductor), Cl. 2.10.5.12 (Wires in wound components), Cl. 2.10.5.13 (Winding wire), Cl. 2.10.5.14 (Additional insulation in wound components), Cl. 2.10.12 (Enclosed and sealed parts), Annex Q (Voltage Dependent Resistors), Cl. 4.3.13.5 (LED, laser class), Annex CC (Evaluation of integrated circuit (IC) current limiters), Annex C (Transformers), Annex K (Thermal Control), Cl. 4.3.12 (Flammable liquids)

10229

THE SOUTH INDIA TEXTILE RESEARCH ASSOCIATION (SITRA), COIMBATORE

6165234

IS 10500 (2012)

Drinking water - Specification (Second Revision)

17775 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4. SL No.i)of Table I(Colour)	-	180	-
4.SL No.ii) of Table I(Odour)	-	120	-
4.SL No.iii)of Table I(pH)	-	120	-
4.SL No.v)of Table I(Turbidity, NTU, Max)	-	120	-
4.SL No.vi)of Table I(Total dissolved solids, mg/l, max)	-	180	-
table 2 sl.no 1( Aluminium (as Al), mg/l, Max)	-	240	-
table 2 sl.no 2(Ammonia (as total ammonia-N), mg/l, Max)	-	225	-
table 2 sl.no 3(Anionic detergents (as MBAS), mg/l, Max)	-	450	-
table 2 sl.no 4(Barium (as Ba), mg/l, Max)	-	260	-
table 2 sl.no 5(Boron (as B), mg/l, Max)	-	410	-
table 2 sl.no 6(Calcium (as Ca), mg/l, Max)	-	150	-
table 2 sl.no 9(Copper (as Cu), mg/l, Max)	-	250	-
table 2 sl.no 10( Fluoride (as F) mg/l, Max)	-	225	-
table 2 sl.no 11(Free residual chlorine, mg/l, Min)	-	180	-
table 2 sl.no 12(Iron (as Fe), mg/l, Max)	-	180	-
table 2 sl.no 13(Magnesium (as Mg), mg/l, Max)	-	150	-
table 2 sl.no 14(Manganese (as Mn), mg/l, Max)	-	180	-
table 2 sl.no 15(Mineral oil, mg/l, Max)	-	140	-
table 2 sl.no 16(Nitrate (as NO3), mg/l, Max)	-	220	-
table 2 sl.no 17(Phenolic compounds (as C6H5OH), mg/l, Max)	-	440	-
table 2 sl.no 18(Selenium (as Se), mg/l, Ma)	-	410	-
table 2 sl.no 19(Silver (as Ag), mg/l, Max)	-	420	-
table 2 sl.no 20(Sulphate (as SO4) mg/l, Max)	-	225	-
table 2 sl.no 21(Sulphide (as H2S), mg/l, Max)	-	180	-
table 2 sl.no 22(Total alkalinity as calcium carbonate, mg/l, Max)	-	150	-
table 2 sl.no 23(Total hardness (as CaCO3 mg/l, Max)	-	150	-
table 2 sl.no 24(Zinc (as Zn), mg/l, Max)	-	260	-
TABLE 3 sl no 1(Cadmium (as Cd), mg/l, Max)	-	250	-
TABLE 3 sl no 2(Cyanide (as CN), mg/l, Max)	-	410	-
TABLE 3 sl no 3(Lead (as Pb), mg/l, Max)	-	410	-
TABLE 3 sl no 4(Mercury (as Hg), mg/l, Max)	-	410	-
TABLE 3 sl no 5( Molybdenum (as Mo), mg/l, Max)	-	410	-
TABLE 3 sl no 6(Nickel (as Ni), mg/l, Max)	-	250	-
TABLE 3 sl no 8(Polychlorinated biphenyls, mg/l,)	-	1490	-
TABLE 3 sl no 9(Polynuclear aromatic hydro-carbons (as PAH), mg/l, Max)	-	1780	-
TABLE 3 sl no 10(Total arsenic (as As), mg/l, Max)	-	410	-
TABLE 3 sl no 11(Total chromium (as Cr), mg/l, Max)	-	250	-
TABLE 3 sl no 12(Bromoform, mg/l, Max)	-	1490	-
TABLE 3 sl no 13(Dibromochloromethane,)	-	1490	-
Table 3 (Clause 4)xii) Trihalomethanes: (b)(Bromodichloromethane)	-	1490	-
TABLE 3 sl no 15(Chloroform, mg/l, Max)	-	1490	-
TABLE 5 sl no 1(Alachlor)	-	1780	-
TABLE 5 sl no 2(Atrazine)	-	1780	-
TABLE 5 sl no 4( Alpha HCH)	-	1780	-
TABLE 5 sl no 5(Beta HCH)	-	1780	-
TABLE 5 sl no 6(Butachlor)	-	1780	-
TABLE 5 sl no 7(Chlorpyriphos)	-	1780	-
TABLE 5 sl no 8(Delta HCH)	-	1780	-
TABLE 5 sl no 9(2,4- Dichlorophenoxyacetic acid)	-	1780	-
TABLE 5 sl no 10( DDT (o, p and p, p – Isomers of DDT, DDE and DDD))	-	1780	-
TABLE 5 sl no 11(Endosulfan (alpha, beta, and sulphate))	-	1780	-
TABLE 5 sl no 12( Ethion)	-	1780	-
TABLE 5 sl no 13(Gamma — HCH (Lindane))	-	1780	-
TABLE 5 sl no 14( Isoproturon)	-	1780	-
TABLE 5 sl no 15(Malathion)	-	1780	-
TABLE 5 sl no 16(Methyl parathion)	-	1780	-
TABLE 5 sl no 17(Monocrotophos)	-	1780	-
TABLE 5 sl no 18(Phorate)	-	1780	-
TABLE 6 sl no 1(All water intended for drinking: a) E. coli or thermotolerant coliform bacteri)	-	315	-
TABLE 6 sl no 2(Treated water entering the distribution system: a) E. coli or thermotolerant coliform bacteria)	-	315	-
TABLE 6 sl no 3(b) Total coliform bacteria)	-	315	-
TABLE 6 sl no 4(Treated water in the distribution system: a) E. coli or thermotolerant coliform bacteria)	-	315	-
Table 3, x)(Uranium)	-	890	-
Table 5(Aldrin and Dieldrin )	-	1780	-
Table 1 clause(iv)(Taste)	-	120	-
4, Table 2, Sr. no. vii(Chloramines)	-	410	-
4, Table 2, Sr.no. viii(Chloride)	-	170	-
Table 3 (Clause 4)xii) Trihalomethanes: (b)(Bromodichloromethane)	-	-	-
Table 3, x)(Uranium)	-	-	-
Table 5(Aldrin and Dieldrin )	-	-	-
Table 1 clause(iv)(Taste)	-	-	-
4, Table 2, Sr. no. vii(Chloramines)	-	-	-
4, Table 2, Sr.no. viii(Chloride)	-	-	-

-
-

10230

MARQUIS TECHNOLOGIES PRIVATE LIMITED, NOIDA

8175126

IS 16046 : Part 2 (2018)

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2(Insulation and Wiring)	-	10000	-
7.1(Charging procedure for test purposes)	-	10000	-
7.2(Intended Use)	-	10000	-
7.3(Reasonably foreseeable misuse)	-	10000	-
8.2(Small Cell and battery safety information)	-	1000	-
9.1(Cell Marking)	-	1000	-
9.2(Battery Marking)	-	1000	-
9.3(Caution for ingestion of small cells and batteries)	-	1000	-
4(Parameter Measurement Tolerances)	-	1000	-
5(General Safety Considerations)	-	1000	-
5.1(General)	-	1000	-
5.3(Venting)	-	1000	-
5.4(Temperature, Voltage and Current Management)	-	1000	-
5.5(Terminal Contacts)	-	1000	-
5.6(Assembly of Cells into batteries)	-	1000	-
5.7(Quality Plan)	-	1000	-
5.8(Battery Safety Components)	-	1000	-
6(Type Test and Sample Size)	-	1000	-
7(Specific requirements and tests)	-	1000	-
8(Information for safety)	-	1000	-
8.1(General)	-	1000	-
9(Marking)	-	1000	-
9.4(Other information)	-	1000	-
10(Packaging)	-	1000	-

13 Dec, 2026

-
-

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number