BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15572 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

10501

IDMA LABORATORIES LIMITED, PANCHKULA

9123236

IS 362 (1991)

Parliament Hinges -specification

Type 1, Type 2, Type 3

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 7.1 (Brass parliament hinges shall have either bright or satin finish and shall be suitably protected against discoloration)	-	0	Testing charges for Material composition for Aluminium/Brass/ Steel for Flap and Pins wherever required (Al, Cu, Mg, Si, Mn, Fe, Zn. Ti, V, Cr, Pb, Total other impurities excluding Iron, P, C, S,N,B, Nb.) are additionally Rs. 8000/- only.
Cl. 7.2 (Ref. Cl. 11.1 of IS 1868:1996)( appearance and Colour - shall be free from visible defects on the significant surface(s) when viewed from an agreed distance)	-	0	-
Cl. 7.2 (Ref. Cl.9 of IS 1868:1996)(Aluminium shall be anodized to a bright, natural, sat or satin finish or dyed. )	-	0	-
Cl. 7.2 (Ref. Cl.9 of IS 1868:1996)(Anodinc casting thickness (Cl. 9.2 of IS 1868:1996))	-	0	NA
Cl. 7.3(Mild steel parliament hinges shall be finished bright or electro-galvanized as specified by the purchaser)	-	0	NA
3(Type)	-	0	NA
5.1-able 2(Dlmenslons for Aluminium Alloy Parliament Hinges-Size)	-	0	NA
5.1-able 2(Dlmenslons for Aluminium Alloy Parliament Hinges-A)	-	300	-
5.1-able 2(Dlmenslons for Aluminium Alloy Parliament Hinges-B)	-	300	-
5.1-able 2(Dlmenslons for Aluminium Alloy Parliament Hinges-C)	-	300	-
5.1-able 2(Dlmenslons for Aluminium Alloy Parliament Hinges-D)	-	300	-
5.1-able 2(Dlmenslons for Aluminium Alloy Parliament Hinges-d)	-	300	-
5.1-able 2(Dlmenslons for Aluminium Alloy Parliament Hinges-E)	-	300	-
5.1-able 2(Dlmenslons for Aluminium Alloy Parliament Hinges-Thickness of Flap)	-	300	-
5.1-able 2(Dlmenslons for Aluminium Alloy Parliament Hinges-No. of Screw holes)	-	300	-
5.1-able 2(Dlmenslons for Aluminium Alloy Parliament Hinges-Holes for screw designation)	-	300	-
5.1-able 3(Dimensions for Cast Brass Parliament Hinges-Size)	-	0	NA
5.1-able 3(Dimensions for Cast Brass Parliament Hinges-A)	-	0	Testing charges for (Width between flanges, Length, Width, Diameter of butt, Pin dia., Length of joints, thickness of flap, no. of Screw holes, Holes for screw designation) are Rs. 300 for each parameter already mentioned above.
5.1-able 3(Dimensions for Cast Brass Parliament Hinges-B)	-	0	Testing charges for (Width between flanges, Length, Width, Diameter of butt, Pin dia., Length of joints, thickness of flap, no. of Screw holes, Holes for screw designation) are Rs. 300 for each parameter already mentioned above.
5.1-able 3(Dimensions for Cast Brass Parliament Hinges-C)	-	0	Testing charges for (Width between flanges, Length, Width, Diameter of butt, Pin dia., Length of joints, thickness of flap, no. of Screw holes, Holes for screw designation) are Rs. 300 for each parameter already mentioned above.
5.1-able 3(Dimensions for Cast Brass Parliament Hinges-D)	-	0	Testing charges for (Width between flanges, Length, Width, Diameter of butt, Pin dia., Length of joints, thickness of flap, no. of Screw holes, Holes for screw designation) are Rs. 300 for each parameter already mentioned above.
5.1-able 3(Dimensions for Cast Brass Parliament Hinges-d)	-	0	Testing charges for (Width between flanges, Length, Width, Diameter of butt, Pin dia., Length of joints, thickness of flap, no. of Screw holes, Holes for screw designation) are Rs. 300 for each parameter already mentioned above.
5.1-able 3(Dimensions for Cast Brass Parliament Hinges-E)	-	0	Testing charges for (Width between flanges, Length, Width, Diameter of butt, Pin dia., Length of joints, thickness of flap, no. of Screw holes, Holes for screw designation) are Rs. 300 for each parameter already mentioned above.
5.1-able 3(Dimensions for Cast Brass Parliament Hinges-Thickness of Flap)	-	0	Testing charges for (Width between flanges, Length, Width, Diameter of butt, Pin dia., Length of joints, thickness of flap, no. of Screw holes, Holes for screw designation) are Rs. 300 for each parameter already mentioned above.
5.1-able 3(Dimensions for Cast Brass Parliament Hinges-No. of Screw holes)	-	0	Testing charges for (Width between flanges, Length, Width, Diameter of butt, Pin dia., Length of joints, thickness of flap, no. of Screw holes, Holes for screw designation) are Rs. 300 for each parameter already mentioned above.
5.1-able 3(Dimensions for Cast Brass Parliament Hinges-Holes for screw designation)	-	0	Testing charges for (Width between flanges, Length, Width, Diameter of butt, Pin dia., Length of joints, thickness of flap, no. of Screw holes, Holes for screw designation) are Rs. 300 for each parameter already mentioned above.
5.1-Table 4(Dimensions for Mild Steel Parliament Hinges-Size)	-	0	NA
5.1-Table 4(Dimensions for Mild Steel Parliament Hinges-A)	-	0	Testing charges for (Width between flanges, Length, Width, Diameter of butt, Pin dia., Length of joints, thickness of flap, no. of Screw holes, Holes for screw designation) are Rs. 300 for each parameter already mentioned above.
5.1-Table 4(Dimensions for Mild Steel Parliament Hinges-B)	-	0	Testing charges for (Width between flanges, Length, Width, Diameter of butt, Pin dia., Length of joints, thickness of flap, no. of Screw holes, Holes for screw designation) are Rs. 300 for each parameter already mentioned above.
5.1-Table 4(Dimensions for Mild Steel Parliament Hinges-C)	-	0	Testing charges for (Width between flanges, Length, Width, Diameter of butt, Pin dia., Length of joints, thickness of flap, no. of Screw holes, Holes for screw designation) are Rs. 300 for each parameter already mentioned above.
5.1-Table 4(Dimensions for Mild Steel Parliament Hinges-D)	-	0	Testing charges for (Width between flanges, Length, Width, Diameter of butt, Pin dia., Length of joints, thickness of flap, no. of Screw holes, Holes for screw designation) are Rs. 300 for each parameter already mentioned above.
5.1-Table 4(Dimensions for Mild Steel Parliament Hinges-d)	-	0	Testing charges for (Width between flanges, Length, Width, Diameter of butt, Pin dia., Length of joints, thickness of flap, no. of Screw holes, Holes for screw designation) are Rs. 300 for each parameter already mentioned above.
5.1-Table 4(Dimensions for Mild Steel Parliament Hinges-E)	-	0	Testing charges for (Width between flanges, Length, Width, Diameter of butt, Pin dia., Length of joints, thickness of flap, no. of Screw holes, Holes for screw designation) are Rs. 300 for each parameter already mentioned above.
5.1-Table 4(Dimensions for Mild Steel Parliament Hinges-Thickness of Flap)	-	0	Testing charges for (Width between flanges, Length, Width, Diameter of butt, Pin dia., Length of joints, thickness of flap, no. of Screw holes, Holes for screw designation) are Rs. 300 for each parameter already mentioned above.
5.1-Table 4(Dimensions for Mild Steel Parliament Hinges-No. of Screw holes)	-	0	Testing charges for (Width between flanges, Length, Width, Diameter of butt, Pin dia., Length of joints, thickness of flap, no. of Screw holes, Holes for screw designation) are Rs. 300 for each parameter already mentioned above.
5.1-Table 4(Dimensions for Mild Steel Parliament Hinges-Holes for screw designation)	-	0	Testing charges for (Width between flanges, Length, Width, Diameter of butt, Pin dia., Length of joints, thickness of flap, no. of Screw holes, Holes for screw designation) are Rs. 300 for each parameter already mentioned above.
6.1(MANUFACTURE-General)	-	0	NA
6.1(MANUFACTURE-General)	-	0	NA
6.2(MANUFACTURE-Knuckles)	-	0	NA
6.2(MANUFACTURE-Knuckles)	-	0	NA
6.2(MANUFACTURE-Knuckles)	-	0	NA
6.2(MANUFACTURE-Knuckles)	-	0	NA
6.3(MANUFACTURE-Pins)	-	300	-
6.3(MANUFACTURE-Pins)	-	0	NA
6.3(MANUFACTURE-Pins)	-	0	NA
6.3(MANUFACTURE-Pins)	-	0	NA
6.4(MANUFACTURE-Screw Holes)	-	300	-
6.5(MANUFACTURE-Position of Holes)	-	800	-
6.5(MANUFACTURE-Position of Holes)	-	0	NA
6.5(MANUFACTURE-Position of Holes-minimum distance from the ends of the flap)	-	0	NA
6.5(MANUFACTURE-Position of Holes-minimum distance from the inner edge)	-	0	NA
6.5(MANUFACTURE-Position of Holes)	-	0	NA
7.1(FINISH)	-	900	-
7.3(FINISH)	-	0	NA
6.1(MANUFACTURE-General)	-	0	NA
Cl. 7.1 (Brass parliament hinges shall have either bright or satin finish and shall be suitably protected against discoloration)	-	0	As above
Cl. 7.2 (Ref. Cl. 11.1 of IS 1868:1996)( appearance and Colour - shall be free from visible defects on the significant surface(s) when viewed from an agreed distance)	-	0	As above
Cl. 7.2 (Ref. Cl.9 of IS 1868:1996)(Aluminium shall be anodized to a bright, natural, sat or satin finish or dyed. )	-	0	As above
Cl. 7.2 (Ref. Cl.9 of IS 1868:1996)(Anodinc casting thickness (Cl. 9.2 of IS 1868:1996))	-	0	As above
Cl. 7.3(Mild steel parliament hinges shall be finished bright or electro-galvanized as specified by the purchaser)	-	0	As above
3(Type)	-	0	As above
5.1-able 2(Dlmenslons for Aluminium Alloy Parliament Hinges-Size)	-	0	As above
5.1-able 2(Dlmenslons for Aluminium Alloy Parliament Hinges-A)	-	0	As above
5.1-able 2(Dlmenslons for Aluminium Alloy Parliament Hinges-B)	-	0	As above
5.1-able 2(Dlmenslons for Aluminium Alloy Parliament Hinges-C)	-	0	As above
5.1-able 2(Dlmenslons for Aluminium Alloy Parliament Hinges-D)	-	0	As above
5.1-able 2(Dlmenslons for Aluminium Alloy Parliament Hinges-d)	-	0	As above
5.1-able 2(Dlmenslons for Aluminium Alloy Parliament Hinges-E)	-	0	As above
5.1-able 2(Dlmenslons for Aluminium Alloy Parliament Hinges-Thickness of Flap)	-	0	As above
5.1-able 2(Dlmenslons for Aluminium Alloy Parliament Hinges-No. of Screw holes)	-	0	As above
5.1-able 2(Dlmenslons for Aluminium Alloy Parliament Hinges-Holes for screw designation)	-	0	As above
5.1-able 3(Dimensions for Cast Brass Parliament Hinges-Size)	-	0	As above
5.1-able 3(Dimensions for Cast Brass Parliament Hinges-A)	-	0	As above
5.1-able 3(Dimensions for Cast Brass Parliament Hinges-B)	-	0	As above
5.1-able 3(Dimensions for Cast Brass Parliament Hinges-C)	-	0	As above
5.1-able 3(Dimensions for Cast Brass Parliament Hinges-D)	-	0	As above
5.1-able 3(Dimensions for Cast Brass Parliament Hinges-d)	-	0	As above
5.1-able 3(Dimensions for Cast Brass Parliament Hinges-E)	-	0	As above
5.1-able 3(Dimensions for Cast Brass Parliament Hinges-Thickness of Flap)	-	0	As above
5.1-able 3(Dimensions for Cast Brass Parliament Hinges-No. of Screw holes)	-	0	As above
5.1-able 3(Dimensions for Cast Brass Parliament Hinges-Holes for screw designation)	-	0	As above
5.1-Table 4(Dimensions for Mild Steel Parliament Hinges-Size)	-	0	As above
5.1-Table 4(Dimensions for Mild Steel Parliament Hinges-A)	-	0	As above
5.1-Table 4(Dimensions for Mild Steel Parliament Hinges-B)	-	0	As above
5.1-Table 4(Dimensions for Mild Steel Parliament Hinges-C)	-	0	As above
5.1-Table 4(Dimensions for Mild Steel Parliament Hinges-D)	-	0	As above
5.1-Table 4(Dimensions for Mild Steel Parliament Hinges-d)	-	0	As above
5.1-Table 4(Dimensions for Mild Steel Parliament Hinges-E)	-	0	As above
5.1-Table 4(Dimensions for Mild Steel Parliament Hinges-Thickness of Flap)	-	0	As above
5.1-Table 4(Dimensions for Mild Steel Parliament Hinges-No. of Screw holes)	-	0	As above
5.1-Table 4(Dimensions for Mild Steel Parliament Hinges-Holes for screw designation)	-	0	As above
6.1(MANUFACTURE-General)	-	0	As above
6.1(MANUFACTURE-General)	-	0	As above
6.2(MANUFACTURE-Knuckles)	-	0	As above
6.2(MANUFACTURE-Knuckles)	-	0	As above
6.2(MANUFACTURE-Knuckles)	-	0	As above
6.2(MANUFACTURE-Knuckles)	-	0	As above
6.3(MANUFACTURE-Pins)	-	0	As above
6.3(MANUFACTURE-Pins)	-	0	As above
6.3(MANUFACTURE-Pins)	-	0	As above
6.3(MANUFACTURE-Pins)	-	0	As above
6.4(MANUFACTURE-Screw Holes)	-	0	As above
6.5(MANUFACTURE-Position of Holes)	-	0	As above
6.5(MANUFACTURE-Position of Holes)	-	0	As above
6.5(MANUFACTURE-Position of Holes-minimum distance from the ends of the flap)	-	0	As above
6.5(MANUFACTURE-Position of Holes-minimum distance from the inner edge)	-	0	As above
6.5(MANUFACTURE-Position of Holes)	-	0	As above
7.1(FINISH)	-	0	As above
7.3(FINISH)	-	0	As above
6.1(MANUFACTURE-General)	-	0	As above

31 Dec, 2029

-
Included w.e.f 23.12.2024

10502

MICRO ENGINEERING AND TESTING LABORATORY OPC PRIVATE LIMITED, SONIPAT

9186006

IS 2185 : Part 1 (2005)

Concrete masonry units - Specification: Part 1 hollow and solid concrete blocks (Third Revision)

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.1(PHYSICAL REQUIREMENTS-General)	-	1000	-
9.2 & 4.2(PHYSICAL REQUIREMENTS-Nominal Dimensions 1.Length 2.Hight 3. Width)	-	1000	-
9.2 & 4.2.3(Nominal Dimensions-variation in the length of units )	-	1000	-
9.2 & 4.2.3(Nominal Dimensions -variation in height and width of units )	-	1000	-
9.2 & 4.2.4, Table-1(Nominal Dimensions-thickness of the face shell)	-	1000	-
9.2 & 4.2.4, Table-1(Nominal Dimensions-thickness of the Web shell)	-	1000	-
9.3 & 5.1 & 5.2 Table 2(PHYSICAL REQUIREMENTS-Blocks Density - 1.Hollow (Open and Closed Cavity) Concrete Block- Grade Aor Grade B 2.Solid Concrete Block — Grade C)	-	1000	-
9.4- Table 2(PHYSICAL REQUIREMENTS - Compressive Strength 1.Minimum Average Compressive Strength of Units 2.Minimum Average Compressive Strength of Individual Unit)	-	4500	-
9.5(PHYSICAL REQUIREMENTS -Water Absorption)	-	2000	-
9.6(PHYSICAL REQUIREMENTS -Drying Shrinkage)	-	5000	-
9.7(PHYSICAL REQUIREMENTS -Moisture Movement)	-	2500	-
15(Marking)	-	500	-

04 Jun, 2028

-
-

10503

IDMA LABORATORIES LIMITED, PANCHKULA

9123236

IS 206 (2010)

Tee and strap hinges - Specification (Fifth Revision)

Light, Medium, Heavy

8200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(DIMENSIONS AND TOLERANCES)	-	0	Total Testing charges foe all test including material composition ( Flap and Pin) are Rs.8200/- Testing charges for material composition (Flap or Pin) are Rs.2700/- Testing charges for material composition (Flap and Pin) are Rs.5400/-
6(WORKMANSHIP)	-	200	Testing Charges for all tests except material composition are Rs.2800/-
7(FINISH)	-	200	-
10(MARKING)	-	0	-
Clause 3.1,1(Light weight (Type 1))	-	0	-
Clause 3.1,2(Light weight (Type 2))	-	0	-
Clause 3.1,3(Medium weight (Type 1))	-	0	-
Clause 3.1,4(Medium weight (Type 2))	-	0	-
Clause 3.1,5(Heavy weight (Type 1))	-	0	-
Clause 3.1,6(Heavy weight (Type 2))	-	0	-
Clause 3.1,7(Heavy weight (Type 3))	-	0	-
Clause 3.2,1(Light weight)	-	0	-
Clause 3.2,2(Medium weight (Type 1))	-	0	-
Clause 3.2,3(Medium weight (Type 2))	-	0	-
Clause 3.2,4(Heavy weight )	-	0	-
Clause 4 Table 1(i)(Mild steel sheet)	-	2700	Testing charges for Mils steel sheet (Carbon, Silicon, Manganese, Sulphur, Phosphorus, Vanadium, Copper, Titanium, Aluminium, Nitrogen, Niobium, Boron ) are Rs.2700/-
Clause 4 Table 1(ii)(Mild steel wire)	-	2700	Testing charges for Mils steel wire (Carbon, Silicon, Manganese, Sulphur, Phosphorus, Vanadium, Copper, Titanium, Aluminium, Nitrogen, Niobium, Boron ) are Rs.2700/-
Clause 5.1(Dimensions)	-	2400	Testing charges for Dimensions & Tolerances ( A,B,C,D,E,F,R,X,Y,size designation of counter shank Head wood Screws, no.of holes in tee and strap) are Rs.2400/-
Clause 6(Workmanship)	-	0	Testing charges already mentioned above.
Clause 8(Packing)	-	0	-
Clause 9(SAMPLING AND CRITERION FOR CONFORMITY)	-	0	-
Clause 10(Marking)	-	0	-

31 Dec, 2029

-
Included w.e.f.21.11.2024

10504

INDIAN TESTING LABORATORY PRIVATE LIMITED, GREATER NOIDA

8171306

IS 3087 (2005)

Practicle boards of wood and other lingnocellulosic materials (medium density) for general purposes -Specification

17000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1 (i) Table 1(Density Variation (Flat Pressed Single Layer))	-	500	-
1 (i) Table 1(Density Variation (Flat Pressed Three Layer grade 1))	-	500	-
1 (i) Table 1(Density Variation (Flat Pressed Three Layer grade 2))	-	500	-
1 (i) Table 1(Density Variation (Extrusion Pressed Solids) XPS)	-	500	-
1 (i) Table 1(Density Variation (Extrusion Pressed Tubular) XPS)	-	500	-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Flat Pressed Single Layer))	-	500	-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Flat Pressed Three Layer grade 1))	-	500	-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Flat Pressed Three Layer grade 2))	-	500	-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Extrusion Pressed Solids) XPS)	-	500	-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Extrusion Pressed Tubular) XPS)	-	500	-
1 (ii) Table 1 (b)(Water absorption, 24h soacking (Flat Pressed Single Layer))	-	500	-
1 (ii) (b) Table 1 (Water absorption, 24h soacking (Flat Pressed Three Layer grade 1))	-	500	-
1 (ii) (b) Table 1 (Water absorption, 24h soacking (Flat Pressed Three Layer grade 2))	-	500	-
1 (ii) (b) Table 1 (Water absorption, 24h soacking (Extrusion Pressed Solids) XPS)	-	500	-
1 (ii) (b) Table 1 (Water absorption, 24h soacking (Extrusion Pressed Tubular) XPS)	-	500	-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Flat Pressed Single Layer))	-	500	-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Flat Pressed Three Layer grade 1))	-	500	-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Flat Pressed Three Layer grade 2))	-	500	-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Extrusion Pressed Solids) XPS)	-	500	-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Extrusion Pressed Tubular) XPS)	-	500	-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Flat Pressed Single Layer))	-	500	-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Flat Pressed Three Layer grade 1))	-	500	-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Flat Pressed Three Layer grade 2))	-	500	-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Extrusion Pressed Solids) XPS)	-	500	-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Extrusion Pressed Tubular) XPS)	-	500	-
1 (iv) Table 1(Thickness swelling, Width (Flat Pressed Single Layer))	-	500	-
1 (iv) Table 1(Thickness swelling, Width (Flat Pressed Three Layer grade 1))	-	500	-
1 (iv) Table 1(Thickness swelling, Width (Flat Pressed Three Layer grade 2))	-	500	-
1 (iv) Table 1(Thickness swelling, Width (Extrusion Pressed Solids) XPS)	-	500	-
1 (iv) Table 1(Thickness swelling, Width (Extrusion Pressed Tubular) XPS)	-	500	-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Flat Pressed Single Layer))	-	500	-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Flat Pressed Three Layer grade 1))	-	500	-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Flat Pressed Three Layer grade 2))	-	500	-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Extrusion Pressed Solids) XPS)	-	500	-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Extrusion Pressed Tubular) XPS)	-	500	-
1 (vi) (a), Table 1(Modulus of rupture, Average (Flat Pressed Single Layer))	-	1000	-
1 (vi) (a), Table 1(Modulus of rupture, Average (Flat Pressed Three Layer grade 1))	-	1000	-
1 (vi) (a), Table 1(Modulus of rupture, Average (Flat Pressed Three Layer grade 2))	-	1000	-
1 (vi) (a), Table 1(Modulus of rupture, Average (Extrusion Pressed Solids) XPS)	-	1000	-
1 (vi) (a), Table 1(Modulus of rupture, Average (Extrusion Pressed Tubular) XPS)	-	1000	-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Flat Pressed Single Layer))	-	1000	-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Flat Pressed Three Layer grade 1))	-	1000	-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Flat Pressed Three Layer grade 2))	-	1000	-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Extrusion Pressed Solids) XPS)	-	1000	-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Extrusion Pressed Tubular) XPT)	-	1000	-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Flat Pressed Single Layer))	-	1000	-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Flat Pressed Three Layer grade 1))	-	1000	-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Flat Pressed Three Layer grade 2))	-	1000	-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Extrusion Pressed Solids) XPS)	-	1000	-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Extrusion Pressed Tubular) XPT)	-	1000	-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Flat Pressed Single Layer))	-	1000	-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Flat Pressed Three Layer grade 1))	-	1000	-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Flat Pressed Three Layer grade 2))	-	1000	-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Extrusion Pressed Solids) XPS)	-	1000	-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Extrusion Pressed Tubular) XPT)	-	1000	-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Flat Pressed Single Layer))	-	1000	-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface,Upto 20mm thickness (Flat Pressed Three Layer grade 1))	-	1000	-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Flat Pressed Three Layer grade 2))	-	1000	-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Extrusion Pressed Solids) XPS)	-	1000	-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Extrusion Pressed Tubular) XPT)	-	1000	-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Flat Pressed Single Layer))	-	1000	-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface,Above 20mm thickness (Flat Pressed Three Layer grade 1))	-	1000	-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Flat Pressed Three Layer grade 2))	-	1000	-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Extrusion Pressed Solids) XPS)	-	1000	-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Extrusion Pressed Tubular) XPT)	-	1000	-
1 (i) Table 1(Density Variation (Flat Pressed Single Layer))	-	0	-
1 (i) Table 1(Density Variation (Flat Pressed Three Layer grade 1))	-	0	-
1 (i) Table 1(Density Variation (Flat Pressed Three Layer grade 2))	-	0	-
1 (i) Table 1(Density Variation (Extrusion Pressed Solids) XPS)	-	0	-
1 (i) Table 1(Density Variation (Extrusion Pressed Tubular) XPS)	-	0	-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Flat Pressed Single Layer))	-	0	-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Flat Pressed Three Layer grade 1))	-	0	-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Flat Pressed Three Layer grade 2))	-	0	-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Extrusion Pressed Solids) XPS)	-	0	-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Extrusion Pressed Tubular) XPS)	-	0	-
1 (ii) Table 1 (b)(Water absorption, 24h soacking (Flat Pressed Single Layer))	-	0	-
1 (ii) (b) Table 1 (Water absorption, 24h soacking (Flat Pressed Three Layer grade 1))	-	0	-
1 (ii) (b) Table 1 (Water absorption, 24h soacking (Flat Pressed Three Layer grade 2))	-	0	-
1 (ii) (b) Table 1 (Water absorption, 24h soacking (Extrusion Pressed Solids) XPS)	-	0	-
1 (ii) (b) Table 1 (Water absorption, 24h soacking (Extrusion Pressed Tubular) XPS)	-	0	-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Flat Pressed Single Layer))	-	0	-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Flat Pressed Three Layer grade 1))	-	0	-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Flat Pressed Three Layer grade 2))	-	0	-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Extrusion Pressed Solids) XPS)	-	0	-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Extrusion Pressed Tubular) XPS)	-	0	-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Flat Pressed Single Layer))	-	0	-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Flat Pressed Three Layer grade 1))	-	0	-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Flat Pressed Three Layer grade 2))	-	0	-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Extrusion Pressed Solids) XPS)	-	0	-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Extrusion Pressed Tubular) XPS)	-	0	-
1 (iv) Table 1(Thickness swelling, Width (Flat Pressed Single Layer))	-	0	-
1 (iv) Table 1(Thickness swelling, Width (Flat Pressed Three Layer grade 1))	-	0	-
1 (iv) Table 1(Thickness swelling, Width (Flat Pressed Three Layer grade 2))	-	0	-
1 (iv) Table 1(Thickness swelling, Width (Extrusion Pressed Solids) XPS)	-	0	-
1 (iv) Table 1(Thickness swelling, Width (Extrusion Pressed Tubular) XPS)	-	0	-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Flat Pressed Single Layer))	-	0	-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Flat Pressed Three Layer grade 1))	-	0	-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Flat Pressed Three Layer grade 2))	-	0	-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Extrusion Pressed Solids) XPS)	-	0	-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Extrusion Pressed Tubular) XPS)	-	0	-
1 (vi) (a), Table 1(Modulus of rupture, Average (Flat Pressed Single Layer))	-	0	-
1 (vi) (a), Table 1(Modulus of rupture, Average (Flat Pressed Three Layer grade 1))	-	0	-
1 (vi) (a), Table 1(Modulus of rupture, Average (Flat Pressed Three Layer grade 2))	-	0	-
1 (vi) (a), Table 1(Modulus of rupture, Average (Extrusion Pressed Solids) XPS)	-	0	-
1 (vi) (a), Table 1(Modulus of rupture, Average (Extrusion Pressed Tubular) XPS)	-	0	-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Flat Pressed Single Layer))	-	0	-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Flat Pressed Three Layer grade 1))	-	0	-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Flat Pressed Three Layer grade 2))	-	0	-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Extrusion Pressed Solids) XPS)	-	0	-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Extrusion Pressed Tubular) XPT)	-	0	-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Flat Pressed Single Layer))	-	0	-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Flat Pressed Three Layer grade 1))	-	0	-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Flat Pressed Three Layer grade 2))	-	0	-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Extrusion Pressed Solids) XPS)	-	0	-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Extrusion Pressed Tubular) XPT)	-	0	-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Flat Pressed Single Layer))	-	0	-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Flat Pressed Three Layer grade 1))	-	0	-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Flat Pressed Three Layer grade 2))	-	0	-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Extrusion Pressed Solids) XPS)	-	0	-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Extrusion Pressed Tubular) XPT)	-	0	-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Flat Pressed Single Layer))	-	0	-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface,Upto 20mm thickness (Flat Pressed Three Layer grade 1))	-	0	-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Flat Pressed Three Layer grade 2))	-	0	-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Extrusion Pressed Solids) XPS)	-	0	-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Extrusion Pressed Tubular) XPT)	-	0	-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Flat Pressed Single Layer))	-	0	-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface,Above 20mm thickness (Flat Pressed Three Layer grade 1))	-	0	-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Flat Pressed Three Layer grade 2))	-	0	-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Extrusion Pressed Solids) XPS)	-	0	-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Extrusion Pressed Tubular) XPT)	-	0	-
7(Finish)	-	200	-
8.3(Dimensional Tolerances)	-	1000	-
9.2, 11.4(Moisture content)	-	500	-
11.10(screw withdrawal strength)	-	1000	-
1 (i) Table 1(Density Variation (Flat Pressed Single Layer))	-	0	-
1 (i) Table 1(Density Variation (Flat Pressed Three Layer grade 1))	-	0	-
1 (i) Table 1(Density Variation (Flat Pressed Three Layer grade 2))	-	0	-
1 (i) Table 1(Density Variation (Extrusion Pressed Solids) XPS)	-	0	-
1 (i) Table 1(Density Variation (Extrusion Pressed Tubular) XPS)	-	0	-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Flat Pressed Single Layer))	-	0	-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Flat Pressed Three Layer grade 1))	-	0	-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Flat Pressed Three Layer grade 2))	-	0	-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Extrusion Pressed Solids) XPS)	-	0	-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Extrusion Pressed Tubular) XPS)	-	0	-
1 (ii) Table 1 (b)(Water absorption, 24h soacking (Flat Pressed Single Layer))	-	0	-
1 (ii) (b) Table 1 (Water absorption, 24h soacking (Flat Pressed Three Layer grade 1))	-	0	-
1 (ii) (b) Table 1 (Water absorption, 24h soacking (Flat Pressed Three Layer grade 2))	-	0	-
1 (ii) (b) Table 1 (Water absorption, 24h soacking (Extrusion Pressed Solids) XPS)	-	0	-
1 (ii) (b) Table 1 (Water absorption, 24h soacking (Extrusion Pressed Tubular) XPS)	-	0	-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Flat Pressed Single Layer))	-	0	-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Flat Pressed Three Layer grade 1))	-	0	-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Flat Pressed Three Layer grade 2))	-	0	-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Extrusion Pressed Solids) XPS)	-	0	-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Extrusion Pressed Tubular) XPS)	-	0	-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Flat Pressed Single Layer))	-	0	-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Flat Pressed Three Layer grade 1))	-	0	-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Flat Pressed Three Layer grade 2))	-	0	-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Extrusion Pressed Solids) XPS)	-	0	-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Extrusion Pressed Tubular) XPS)	-	0	-
1 (iv) Table 1(Thickness swelling, Width (Flat Pressed Single Layer))	-	0	-
1 (iv) Table 1(Thickness swelling, Width (Flat Pressed Three Layer grade 1))	-	0	-
1 (iv) Table 1(Thickness swelling, Width (Flat Pressed Three Layer grade 2))	-	0	-
1 (iv) Table 1(Thickness swelling, Width (Extrusion Pressed Solids) XPS)	-	0	-
1 (iv) Table 1(Thickness swelling, Width (Extrusion Pressed Tubular) XPS)	-	0	-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Flat Pressed Single Layer))	-	0	-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Flat Pressed Three Layer grade 1))	-	0	-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Flat Pressed Three Layer grade 2))	-	0	-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Extrusion Pressed Solids) XPS)	-	0	-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Extrusion Pressed Tubular) XPS)	-	0	-
1 (vi) (a), Table 1(Modulus of rupture, Average (Flat Pressed Single Layer))	-	0	-
1 (vi) (a), Table 1(Modulus of rupture, Average (Flat Pressed Three Layer grade 1))	-	0	-
1 (vi) (a), Table 1(Modulus of rupture, Average (Flat Pressed Three Layer grade 2))	-	0	-
1 (vi) (a), Table 1(Modulus of rupture, Average (Extrusion Pressed Solids) XPS)	-	0	-
1 (vi) (a), Table 1(Modulus of rupture, Average (Extrusion Pressed Tubular) XPS)	-	0	-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Flat Pressed Single Layer))	-	0	-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Flat Pressed Three Layer grade 1))	-	0	-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Flat Pressed Three Layer grade 2))	-	0	-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Extrusion Pressed Solids) XPS)	-	0	-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Extrusion Pressed Tubular) XPT)	-	0	-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Flat Pressed Single Layer))	-	0	-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Flat Pressed Three Layer grade 1))	-	0	-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Flat Pressed Three Layer grade 2))	-	0	-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Extrusion Pressed Solids) XPS)	-	0	-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Extrusion Pressed Tubular) XPT)	-	0	-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Flat Pressed Single Layer))	-	0	-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Flat Pressed Three Layer grade 1))	-	0	-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Flat Pressed Three Layer grade 2))	-	0	-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Extrusion Pressed Solids) XPS)	-	0	-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Extrusion Pressed Tubular) XPT)	-	0	-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Flat Pressed Single Layer))	-	0	-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface,Upto 20mm thickness (Flat Pressed Three Layer grade 1))	-	0	-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Flat Pressed Three Layer grade 2))	-	0	-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Extrusion Pressed Solids) XPS)	-	0	-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Extrusion Pressed Tubular) XPT)	-	0	-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Flat Pressed Single Layer))	-	0	-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface,Above 20mm thickness (Flat Pressed Three Layer grade 1))	-	0	-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Flat Pressed Three Layer grade 2))	-	0	-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Extrusion Pressed Solids) XPS)	-	0	-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Extrusion Pressed Tubular) XPT)	-	0	-
1 (i) Table 1(Density Variation (Flat Pressed Single Layer))	-	0	-
1 (i) Table 1(Density Variation (Flat Pressed Three Layer grade 1))	-	0	-
1 (i) Table 1(Density Variation (Flat Pressed Three Layer grade 2))	-	0	-
1 (i) Table 1(Density Variation (Extrusion Pressed Solids) XPS)	-	0	-
1 (i) Table 1(Density Variation (Extrusion Pressed Tubular) XPS)	-	0	-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Flat Pressed Single Layer))	-	0	-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Flat Pressed Three Layer grade 1))	-	0	-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Flat Pressed Three Layer grade 2))	-	0	-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Extrusion Pressed Solids) XPS)	-	0	-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Extrusion Pressed Tubular) XPS)	-	0	-
1 (ii) Table 1 (b)(Water absorption, 24h soacking (Flat Pressed Single Layer))	-	0	-
1 (ii) (b) Table 1 (Water absorption, 24h soacking (Flat Pressed Three Layer grade 1))	-	0	-
1 (ii) (b) Table 1 (Water absorption, 24h soacking (Flat Pressed Three Layer grade 2))	-	0	-
1 (ii) (b) Table 1 (Water absorption, 24h soacking (Extrusion Pressed Solids) XPS)	-	0	-
1 (ii) (b) Table 1 (Water absorption, 24h soacking (Extrusion Pressed Tubular) XPS)	-	0	-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Flat Pressed Single Layer))	-	0	-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Flat Pressed Three Layer grade 1))	-	0	-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Flat Pressed Three Layer grade 2))	-	0	-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Extrusion Pressed Solids) XPS)	-	0	-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Extrusion Pressed Tubular) XPS)	-	0	-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Flat Pressed Single Layer))	-	0	-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Flat Pressed Three Layer grade 1))	-	0	-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Flat Pressed Three Layer grade 2))	-	0	-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Extrusion Pressed Solids) XPS)	-	0	-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Extrusion Pressed Tubular) XPS)	-	0	-
1 (iv) Table 1(Thickness swelling, Width (Flat Pressed Single Layer))	-	0	-
1 (iv) Table 1(Thickness swelling, Width (Flat Pressed Three Layer grade 1))	-	0	-
1 (iv) Table 1(Thickness swelling, Width (Flat Pressed Three Layer grade 2))	-	0	-
1 (iv) Table 1(Thickness swelling, Width (Extrusion Pressed Solids) XPS)	-	0	-
1 (iv) Table 1(Thickness swelling, Width (Extrusion Pressed Tubular) XPS)	-	0	-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Flat Pressed Single Layer))	-	0	-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Flat Pressed Three Layer grade 1))	-	0	-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Flat Pressed Three Layer grade 2))	-	0	-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Extrusion Pressed Solids) XPS)	-	0	-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Extrusion Pressed Tubular) XPS)	-	0	-
1 (vi) (a), Table 1(Modulus of rupture, Average (Flat Pressed Single Layer))	-	0	-
1 (vi) (a), Table 1(Modulus of rupture, Average (Flat Pressed Three Layer grade 1))	-	0	-
1 (vi) (a), Table 1(Modulus of rupture, Average (Flat Pressed Three Layer grade 2))	-	0	-
1 (vi) (a), Table 1(Modulus of rupture, Average (Extrusion Pressed Solids) XPS)	-	0	-
1 (vi) (a), Table 1(Modulus of rupture, Average (Extrusion Pressed Tubular) XPS)	-	0	-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Flat Pressed Single Layer))	-	0	-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Flat Pressed Three Layer grade 1))	-	0	-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Flat Pressed Three Layer grade 2))	-	0	-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Extrusion Pressed Solids) XPS)	-	0	-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Extrusion Pressed Tubular) XPT)	-	0	-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Flat Pressed Single Layer))	-	0	-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Flat Pressed Three Layer grade 1))	-	0	-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Flat Pressed Three Layer grade 2))	-	0	-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Extrusion Pressed Solids) XPS)	-	0	-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Extrusion Pressed Tubular) XPT)	-	0	-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Flat Pressed Single Layer))	-	0	-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Flat Pressed Three Layer grade 1))	-	0	-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Flat Pressed Three Layer grade 2))	-	0	-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Extrusion Pressed Solids) XPS)	-	0	-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Extrusion Pressed Tubular) XPT)	-	0	-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Flat Pressed Single Layer))	-	0	-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface,Upto 20mm thickness (Flat Pressed Three Layer grade 1))	-	0	-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Flat Pressed Three Layer grade 2))	-	0	-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Extrusion Pressed Solids) XPS)	-	0	-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Extrusion Pressed Tubular) XPT)	-	0	-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Flat Pressed Single Layer))	-	0	-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface,Above 20mm thickness (Flat Pressed Three Layer grade 1))	-	0	-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Flat Pressed Three Layer grade 2))	-	0	-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Extrusion Pressed Solids) XPS)	-	0	-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Extrusion Pressed Tubular) XPT)	-	0	-
7(Finish)	-	0	-
8.3(Dimensional Tolerances)	-	0	-
9.2, 11.4(Moisture content)	-	0	-
11.10(screw withdrawal strength)	-	0	-
Cl-9.6(Workability)	-	0	-
Cl-9.7 (Amendment No-5)(Formaldehyde Content/Emission, Fc)	-	500	-
Cl-9.7.2 (Amendment No-5)(Steady State Formaldehyde Emission Value)	-	500	-
1 (i) Table 1(Density Variation (Flat Pressed Single Layer))	-	0	-
1 (i) Table 1(Density Variation (Flat Pressed Three Layer grade 1))	-	0	-
1 (i) Table 1(Density Variation (Flat Pressed Three Layer grade 2))	-	0	-
1 (i) Table 1(Density Variation (Extrusion Pressed Solids) XPS)	-	0	-
1 (i) Table 1(Density Variation (Extrusion Pressed Tubular) XPS)	-	0	-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Flat Pressed Single Layer))	-	0	-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Flat Pressed Three Layer grade 1))	-	0	-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Flat Pressed Three Layer grade 2))	-	0	-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Extrusion Pressed Solids) XPS)	-	0	-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Extrusion Pressed Tubular) XPS)	-	0	-
1 (ii) Table 1 (b)(Water absorption, 24h soacking (Flat Pressed Single Layer))	-	0	-
1 (ii) (b) Table 1 (Water absorption, 24h soacking (Flat Pressed Three Layer grade 1))	-	0	-
1 (ii) (b) Table 1 (Water absorption, 24h soacking (Flat Pressed Three Layer grade 2))	-	0	-
1 (ii) (b) Table 1 (Water absorption, 24h soacking (Extrusion Pressed Solids) XPS)	-	0	-
1 (ii) (b) Table 1 (Water absorption, 24h soacking (Extrusion Pressed Tubular) XPS)	-	0	-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Flat Pressed Single Layer))	-	0	-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Flat Pressed Three Layer grade 1))	-	0	-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Flat Pressed Three Layer grade 2))	-	0	-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Extrusion Pressed Solids) XPS)	-	0	-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Extrusion Pressed Tubular) XPS)	-	0	-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Flat Pressed Single Layer))	-	0	-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Flat Pressed Three Layer grade 1))	-	0	-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Flat Pressed Three Layer grade 2))	-	0	-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Extrusion Pressed Solids) XPS)	-	0	-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Extrusion Pressed Tubular) XPS)	-	0	-
1 (iv) Table 1(Thickness swelling, Width (Flat Pressed Single Layer))	-	0	-
1 (iv) Table 1(Thickness swelling, Width (Flat Pressed Three Layer grade 1))	-	0	-
1 (iv) Table 1(Thickness swelling, Width (Flat Pressed Three Layer grade 2))	-	0	-
1 (iv) Table 1(Thickness swelling, Width (Extrusion Pressed Solids) XPS)	-	0	-
1 (iv) Table 1(Thickness swelling, Width (Extrusion Pressed Tubular) XPS)	-	0	-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Flat Pressed Single Layer))	-	0	-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Flat Pressed Three Layer grade 1))	-	0	-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Flat Pressed Three Layer grade 2))	-	0	-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Extrusion Pressed Solids) XPS)	-	0	-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Extrusion Pressed Tubular) XPS)	-	0	-
1 (vi) (a), Table 1(Modulus of rupture, Average (Flat Pressed Single Layer))	-	0	-
1 (vi) (a), Table 1(Modulus of rupture, Average (Flat Pressed Three Layer grade 1))	-	0	-
1 (vi) (a), Table 1(Modulus of rupture, Average (Flat Pressed Three Layer grade 2))	-	0	-
1 (vi) (a), Table 1(Modulus of rupture, Average (Extrusion Pressed Solids) XPS)	-	0	-
1 (vi) (a), Table 1(Modulus of rupture, Average (Extrusion Pressed Tubular) XPS)	-	0	-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Flat Pressed Single Layer))	-	0	-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Flat Pressed Three Layer grade 1))	-	0	-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Flat Pressed Three Layer grade 2))	-	0	-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Extrusion Pressed Solids) XPS)	-	0	-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Extrusion Pressed Tubular) XPT)	-	0	-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Flat Pressed Single Layer))	-	0	-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Flat Pressed Three Layer grade 1))	-	0	-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Flat Pressed Three Layer grade 2))	-	0	-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Extrusion Pressed Solids) XPS)	-	0	-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Extrusion Pressed Tubular) XPT)	-	0	-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Flat Pressed Single Layer))	-	0	-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Flat Pressed Three Layer grade 1))	-	0	-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Flat Pressed Three Layer grade 2))	-	0	-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Extrusion Pressed Solids) XPS)	-	0	-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Extrusion Pressed Tubular) XPT)	-	0	-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Flat Pressed Single Layer))	-	0	-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface,Upto 20mm thickness (Flat Pressed Three Layer grade 1))	-	0	-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Flat Pressed Three Layer grade 2))	-	0	-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Extrusion Pressed Solids) XPS)	-	0	-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Extrusion Pressed Tubular) XPT)	-	0	-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Flat Pressed Single Layer))	-	0	-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface,Above 20mm thickness (Flat Pressed Three Layer grade 1))	-	0	-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Flat Pressed Three Layer grade 2))	-	0	-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Extrusion Pressed Solids) XPS)	-	0	-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Extrusion Pressed Tubular) XPT)	-	0	-
1 (i) Table 1(Density Variation (Flat Pressed Single Layer))	-	0	-
1 (i) Table 1(Density Variation (Flat Pressed Three Layer grade 1))	-	0	-
1 (i) Table 1(Density Variation (Flat Pressed Three Layer grade 2))	-	0	-
1 (i) Table 1(Density Variation (Extrusion Pressed Solids) XPS)	-	0	-
1 (i) Table 1(Density Variation (Extrusion Pressed Tubular) XPS)	-	0	-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Flat Pressed Single Layer))	-	0	-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Flat Pressed Three Layer grade 1))	-	0	-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Flat Pressed Three Layer grade 2))	-	0	-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Extrusion Pressed Solids) XPS)	-	0	-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Extrusion Pressed Tubular) XPS)	-	0	-
1 (ii) Table 1 (b)(Water absorption, 24h soacking (Flat Pressed Single Layer))	-	0	-
1 (ii) (b) Table 1 (Water absorption, 24h soacking (Flat Pressed Three Layer grade 1))	-	0	-
1 (ii) (b) Table 1 (Water absorption, 24h soacking (Flat Pressed Three Layer grade 2))	-	0	-
1 (ii) (b) Table 1 (Water absorption, 24h soacking (Extrusion Pressed Solids) XPS)	-	0	-
1 (ii) (b) Table 1 (Water absorption, 24h soacking (Extrusion Pressed Tubular) XPS)	-	0	-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Flat Pressed Single Layer))	-	0	-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Flat Pressed Three Layer grade 1))	-	0	-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Flat Pressed Three Layer grade 2))	-	0	-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Extrusion Pressed Solids) XPS)	-	0	-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Extrusion Pressed Tubular) XPS)	-	0	-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Flat Pressed Single Layer))	-	0	-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Flat Pressed Three Layer grade 1))	-	0	-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Flat Pressed Three Layer grade 2))	-	0	-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Extrusion Pressed Solids) XPS)	-	0	-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Extrusion Pressed Tubular) XPS)	-	0	-
1 (iv) Table 1(Thickness swelling, Width (Flat Pressed Single Layer))	-	0	-
1 (iv) Table 1(Thickness swelling, Width (Flat Pressed Three Layer grade 1))	-	0	-
1 (iv) Table 1(Thickness swelling, Width (Flat Pressed Three Layer grade 2))	-	0	-
1 (iv) Table 1(Thickness swelling, Width (Extrusion Pressed Solids) XPS)	-	0	-
1 (iv) Table 1(Thickness swelling, Width (Extrusion Pressed Tubular) XPS)	-	0	-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Flat Pressed Single Layer))	-	0	-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Flat Pressed Three Layer grade 1))	-	0	-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Flat Pressed Three Layer grade 2))	-	0	-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Extrusion Pressed Solids) XPS)	-	0	-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Extrusion Pressed Tubular) XPS)	-	0	-
1 (vi) (a), Table 1(Modulus of rupture, Average (Flat Pressed Single Layer))	-	0	-
1 (vi) (a), Table 1(Modulus of rupture, Average (Flat Pressed Three Layer grade 1))	-	0	-
1 (vi) (a), Table 1(Modulus of rupture, Average (Flat Pressed Three Layer grade 2))	-	0	-
1 (vi) (a), Table 1(Modulus of rupture, Average (Extrusion Pressed Solids) XPS)	-	0	-
1 (vi) (a), Table 1(Modulus of rupture, Average (Extrusion Pressed Tubular) XPS)	-	0	-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Flat Pressed Single Layer))	-	0	-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Flat Pressed Three Layer grade 1))	-	0	-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Flat Pressed Three Layer grade 2))	-	0	-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Extrusion Pressed Solids) XPS)	-	0	-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Extrusion Pressed Tubular) XPT)	-	0	-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Flat Pressed Single Layer))	-	0	-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Flat Pressed Three Layer grade 1))	-	0	-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Flat Pressed Three Layer grade 2))	-	0	-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Extrusion Pressed Solids) XPS)	-	0	-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Extrusion Pressed Tubular) XPT)	-	0	-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Flat Pressed Single Layer))	-	0	-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Flat Pressed Three Layer grade 1))	-	0	-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Flat Pressed Three Layer grade 2))	-	0	-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Extrusion Pressed Solids) XPS)	-	0	-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Extrusion Pressed Tubular) XPT)	-	0	-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Flat Pressed Single Layer))	-	0	-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface,Upto 20mm thickness (Flat Pressed Three Layer grade 1))	-	0	-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Flat Pressed Three Layer grade 2))	-	0	-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Extrusion Pressed Solids) XPS)	-	0	-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Extrusion Pressed Tubular) XPT)	-	0	-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Flat Pressed Single Layer))	-	0	-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface,Above 20mm thickness (Flat Pressed Three Layer grade 1))	-	0	-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Flat Pressed Three Layer grade 2))	-	0	-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Extrusion Pressed Solids) XPS)	-	0	-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Extrusion Pressed Tubular) XPT)	-	0	-
7(Finish)	-	0	-
8.3(Dimensional Tolerances)	-	0	-
9.2, 11.4(Moisture content)	-	0	-
11.10(screw withdrawal strength)	-	0	-
Cl-9.6(Workability)	-	0	-
Cl-9.7 (Amendment No-5)(Formaldehyde Content/Emission, Fc)	-	0	-
Cl-12 (Amendment No 1)(ADDITIONAL REQUIREMENTS FOR ECO MARK)	-	0	-
Cl-9.7.2 (Amendment No-5)(Steady State Formaldehyde Emission Value)	-	0	Test Facility is not available.

15 Aug, 2028

-
Included w.e.f 18.12.2024 Exclusion : Cl-9.7.2 (Amendment No-5) (Steady State Formaldehyde Emission Value)

10505

Cotecna Inspection India Private Limited, Gurugram

8166106

IS 17043 : Part 1 (2024)

Shoes - Specification Part 1 Shoes for Services

65000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.2(Design)	-	200	-
Cl-4.3.1(Size)	-	200	-
Cl-4.3.2(Weight)	-	200	-
Cl-4.4(Height of Upper)	-	200	-
Cl-4.5, S.Cl-4.5.2(Ergonomic Feature)	-	1000	-
Cl-4.5, S.Cl-4.5.3(Bond Strength)	-	1080	-
Cl-4.5, S.Cl-4.5.4(Slip Resistance)	-	2500	-
Cl-4.5.5.1(Electrical Properties-Antistatic footwear)	-	6000	-
Cl-4.5, S.Cl-4.5.6(Heat Insulation of Sole Complex)	-	1000	-
Cl-4.5, S.Cl-4.5.7(Cold Insulation of Sole Complex)	-	1000	-
Cl-4.6.1(Material)	-	200	-
Cl-4.6.2(Tear Strength)	-	450	-
Cl-4.6.3(Water Vapour Permeability and Coefficient)	-	630	-
Cl-4.6.4(Water Penetration and Water Absorption)	-	630	-
Cl-4.7.1(Material)	-	200	-
Cl-4.7.2(Tear Strength)	-	450	-
Cl-4.7.3(Abrasion Resistance)	-	1500	-
Cl-4.7.4(Water Vapour Permeability and Coefficient)	-	630	-
Cl. 4.8.1(Material)	-	200	-
Cl-4.8.2(Abrasion Resistance)	-	900	-
Cl-4.8.3(Water Absorption and Desorption)	-	700	-
Cl-4.9.3(Abrasion Resistance)	-	1500	-
Cl-4.10(Toe Puff and Counter Stiffener)	-	200	-
Cl-4.11.1(Material)	-	200	-
Cl-4.11.2(Tear Strength)	-	450	-
Cl-4.12(Closing Thread)	-	450	-
Cl-4.13.2(Thickness)	-	200	-
Cl-4.13.3(Moulded Density)	-	300	-
Cl-4.13.4(Hardness)	-	200	-
Cl-4.13.5(Ageing Test)	-	500	-
Cl-4.13.6(Tear Strength)	-	450	-
Cl-4.13.7(Abrasion Resistance)	-	1080	-
Cl-4.13.8(Flexing Resistance)	-	1080	-
Cl-4.14(Eyelet)	-	1000	-
Cl-4.15.2(Breaking Load and Tag Retention)	-	500	-
Cl-5(Chemical Requirements)	-	40000	-
Cl-7(Marking)	-	200	-
Cl.4.5.8(Energy Absorption of Seat Region)	-	600	-
Cl- 4.5.3.1(Upper-outsole bond strength)	-	1080	-
Cl.4.5.3.2(Interlayer bond strength)	-	1080	-
Cl-4.9.1(Material)	-	200	-
Cl-4.9.2(Water Absorption and Desorption)	-	900	-
Cl-4.13.1(Material)	-	200	-
Cl-4.2(Design)	-	200	-
Cl-4.3.1(Size)	-	200	-
Cl-4.3.2(Weight)	-	200	-
Cl-4.4(Height of Upper)	-	200	-
Cl-4.5, S.Cl-4.5.2(Ergonomic Feature)	-	1000	-
Cl-4.5, S.Cl-4.5.3(Bond Strength)	-	1080	-
Cl-4.5, S.Cl-4.5.4(Slip Resistance)	-	2500	-
Cl-4.5.5.1(Electrical Properties-Antistatic footwear)	-	6000	-
Cl-4.5, S.Cl-4.5.6(Heat Insulation of Sole Complex)	-	1000	-
Cl-4.5, S.Cl-4.5.7(Cold Insulation of Sole Complex)	-	1000	-
Cl-4.6.1(Material)	-	200	-
Cl-4.6.2(Tear Strength)	-	450	-
Cl-4.6.3(Water Vapour Permeability and Coefficient)	-	630	-
Cl-4.6.4(Water Penetration and Water Absorption)	-	630	-
Cl-4.7.1(Material)	-	200	-
Cl-4.7.2(Tear Strength)	-	450	-
Cl-4.7.3(Abrasion Resistance)	-	1500	-
Cl-4.7.4(Water Vapour Permeability and Coefficient)	-	630	-
Cl. 4.8.1(Material)	-	200	-
Cl-4.8.2(Abrasion Resistance)	-	900	-
Cl-4.8.3(Water Absorption and Desorption)	-	700	-
Cl-4.9.3(Abrasion Resistance)	-	1500	-
Cl-4.10(Toe Puff and Counter Stiffener)	-	200	-
Cl-4.11.1(Material)	-	200	-
Cl-4.11.2(Tear Strength)	-	450	-
Cl-4.12(Closing Thread)	-	450	-
Cl-4.13.2(Thickness)	-	200	-
Cl-4.13.3(Moulded Density)	-	300	-
Cl-4.13.4(Hardness)	-	200	-
Cl-4.13.5(Ageing Test)	-	500	-
Cl-4.13.6(Tear Strength)	-	450	-
Cl-4.13.7(Abrasion Resistance)	-	1080	-
Cl-4.13.8(Flexing Resistance)	-	1080	-
Cl-4.14(Eyelet)	-	1000	-
Cl-4.15.2(Breaking Load and Tag Retention)	-	500	-
Cl-5(Chemical Requirements)	-	40000	-
Cl-7(Marking)	-	200	-
Cl.4.5.8(Energy Absorption of Seat Region)	-	600	-
Cl- 4.5.3.1(Upper-outsole bond strength)	-	1080	-
Cl.4.5.3.2(Interlayer bond strength)	-	1080	-
Cl-4.9.1(Material)	-	200	-
Cl-4.9.2(Water Absorption and Desorption)	-	900	-
Cl-4.13.1(Material)	-	200	-
Cl-4.15.1(Material)	-	200	-
4.9 Insocks(Insock thickness)	-	200	-
Cl-5, Table 1 of IS 17011 (i)(Allergenic and carcinogenic disperse dyes)	-	4460	-
Cl-5, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	2610	-
Cl-5, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	2610	-
Cl-5, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	1490	-
Cl-5, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	4950	-
Cl-5, Table no 1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	4300	-
Cl-5, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	4300	-
Cl-5, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	6930	-
Cl-5, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	3470	-
Cl-5, Table no 1 of IS 17011 (x)(pH)	-	300	-
Cl-5, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	3960	-
Cl-5, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	3470	-

28 Oct, 2029

-
Included w.e.f 30.01.2025

10506

Precision Laboratories LLP, Ahmedabad

7174106

IS 15477 (2019)

Adhesives for use with ceramic tiles and mosaics

18800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Classification)	-	100	-
5.1(Tensile Adhesion Strength )	-	3500	-
5.1(Tensile Adhesion Strength)	-	3500	-
5.2(Shear Adhesion Strength )	-	3500	-
5.2(Shear Adhesion Strength)	-	3500	-
5.2(Shear Adhesion Strength)	-	3500	-
5.3(OpenTime)	-	3500	-
5.4(Adjustment Time)	-	3500	-
5.5(Slip (Required for Vertical Application Only))	-	3500	-
5.6(Deformability (Required for VerticalApplication Only))	-	3500	-
8.2(Marking)	-	100	-
4(Classification)	-	100	-
5.1(Tensile Adhesion Strength )	-	3500	-
5.1(Tensile Adhesion Strength)	-	3500	-
5.2(Shear Adhesion Strength )	-	3500	-
5.2(Shear Adhesion Strength)	-	3500	-
5.2(Shear Adhesion Strength)	-	3500	-
5.3(OpenTime)	-	3500	-
5.4(Adjustment Time)	-	3500	-
5.5(Slip (Required for Vertical Application Only))	-	3500	-
5.6(Deformability (Required for VerticalApplication Only))	-	3500	-
8.2(Marking)	-	100	-
4(Classification)	-	-	-
5.1(Tensile Adhesion Strength )	-	-	-
5.1(Tensile Adhesion Strength)	-	-	-
5.2(Shear Adhesion Strength )	-	-	-
5.2(Shear Adhesion Strength)	-	-	-
5.2(Shear Adhesion Strength)	-	-	-
5.3(OpenTime)	-	-	-
5.4(Adjustment Time)	-	-	-
5.5(Slip (Required for Vertical Application Only))	-	-	-
5.6(Deformability (Required for VerticalApplication Only))	-	-	-
8.2(Marking)	-	-	-

31 Oct, 2029

-
Included w.e.f. 17.09.2024

10507

SGS India Pvt Ltd, Gurgaon

8167436

IS 15844 : Part 1 (2023)

SPORTS FOOTWEAR PART -1 GENERAL PURPOSEFirst Revision

General Purpose

74000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl No.4.1(Sampling and Conditioning)	-	0	-
Cl No.4.2(Construction)	-	0	-
4.3.1(Insole)	-	0	-
4.3.2(Toe spring height)	-	300	-
4.3.3(Upper to Mid Sole/Out Sole Bond Performance)	-	500	-
4.3.4("Upper to Composite Sole Bond Performance (Applicable Only When the Sole is Composite)")	-	500	-
4.3.5(Out Sole to Mid Sole (Multilayer) Bond Performance)	-	500	-
4.3.6(Energy Absorption at Seat Region)	-	1000	-
4.3.7(Complete Shoe Flexing)	-	1000	-
4.3.8(Washability)	-	1500	-
4.3.9(Slip Resistance)	-	1500	-
Cl No.4.4 , Table No. 2 , i) , a)(Flexing resistance, Dry condition)	-	600	-
Cl No.4.4 , Table No. 2 , i) , b)(Flexing resistance, Wet condition)	-	600	-
Cl No.4.4 , Table No. 2 , ii)(Tear strength (average force), Min, N)	-	500	-
Cl No.4.4 , Table No. 2 , iii) , a)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Dry: (rubbing) Rating: (Marring and staining) ")	-	500	-
Cl No.4.4 , Table No. 2 , iii) , b)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Wet: (rubbing) Rating: (Marring and staining)")	-	500	-
Cl No.4.4 , Table No. 2 , iv) , a)(Water vapour permeability, mg/cm2h, Min)	-	900	-
Cl No.4.4 , Table No. 2 , iv) , b)(Water vapour coefficient, mg/cm2 , Min)	-	0	-
Cl No.4.4 , Table No. 2 , v)(Stitch tear strength (double hole), N/mm, Min)	-	500	-
Cl No.4.4 , Table No. 2 , vi)("Colour fastness to light (Optional) Grey scale rate, Min Rating: (Marring)")	-	1000	-
Cl No.4.4 , Table No. 2 , i)(Breaking strength, N/mm, Min)	-	500	-
Cl No.4.4 , Table No. 2 , ii)(Elongation at break, percent Min)	-	0	-
Cl No.4.4 , Table No. 2 , iii)(Tear strength, N, Min For Fabric: For all other materials)	-	500	-
Cl No.4.4 , Table No. 2 , iv) , a)(Flexing resistance, Dry condition)	-	600	-
Cl No.4.4 , Table No. 2 , iv) , b)(Flexing resistance, ,Wet condition)	-	600	-
Cl No.4.4 , Table No. 2 , v) , a)(Water vapour permeability, mg/cm2h, Min)	-	900	-
Cl No.4.4 , Table No. 2 , v) , b)("Water vapour coefficient, mg/cm2 , Min ")	-	0	-
Cl No.4.4 , Table No. 2 , vi)(Hydrolysis resistance)	-	4500	-
Cl No.4.4 , Table No. 2 , vii)(Bursting Strength, kg/cm2 , Min)	-	500	-
Cl No.4.5 , Table No. 3 , i)(Tear strength, N, Min)	-	500	-
Cl No.4.5 , Table No. 3 , ii)(Abrasion resistance, cycles)	-	900	-
Cl No.4.5 , Table No. 3 , iii)("Colour fastness to rubbing (crocking), Grey scale rate with 10 rubs on dry or wet, Min")	-	500	-
Cl No.4.5 , Table No. 3 , iv)("Colour fastness to perspiration (contact method) Grey scale rate, Min")	-	500	-
Cl No.4.5 , Table No. 3 , v) , a)(Water vapour permeability, mg/cm2h, Min)	-	900	-
Cl No.4.5 , Table No. 3 , v) , b)("Water vapour coefficient, mg/cm2 , Min ")	-	0	-
Cl No.4.6 , Table No. 4 , i)(Thickness, mm, Min)	-	200	-
Cl No.4.6 , Table No. 4 , ii)(Flexing index, Min)	-	900	-
Cl No.4.6 , Table No. 4 , iii)(Abrasion resistance, at 400 cycles)	-	900	-
Cl No.4.6 , Table No. 4 , iv) , a)(Water Absorption, mg/cm2 , Min)	-	750	-
Cl No.4.6 , Table No. 4 , iv) , b)(Water Desorption, percent, Min)	-	0	-
Cl No.4.7, Table No. 5 , i)(Thickness, mm, Min)	-	200	-
Cl No.4.7, Table No. 5 , ii)(Abrasion resistance, cycles)	-	900	-
Cl No.4.7, Table No. 5 , iii) , a)(Water Absorption, mg/cm2 , Min)	-	750	-
Cl No.4.7, Table No. 5 , iii) , b)(Water Desorption, percent, Min)	-	0	-
Cl No.4.8 , Table No. 6 , i)(Abrasion resistance (Volume loss), mm3 , Max)	-	900	-
Cl No.4.8 , Table No. 6 , ii)("Flexing resistance Belt Method at 90 diameter Mandrel or Bennewart method, cut growth, Max")	-	600	-
Cl No.4.8 , Table No. 6 , iii)("Hydrolysis resistance, cut growth after 150 000 flexes, in mm, Max")	-	4700	-
Cl No.4.9 , Table No. 7 , i)(Compression set, percent, Max)	-	1000	-
Cl No.4.9 , Table No. 7 , ii)(Split tear strength, kg/25 mm, Min)	-	500	-
Cl No.4.9 , Table No. 7 , iii)(Heat shrinkage, percent, Max)	-	750	-
Cl No.4.10 , Table No. 8 , i)(First dry collapsing load, hardness, N, Min)	-	2000	-
Cl No.4.10 , Table No. 8 , ii)(Resilience, percent, Min)	-	0	-
Cl No.4.10 , Table No. 8 , iii)(Moisture resistance, percent, Min)	-	0	-
Cl No.4.10 , Table No. 8 , iv) , a)(Initial dry area shape retention, percent, Min)	-	0	-
Cl No.4.10 , Table No. 8 , iv) , b)(Area shape retention after 10th collapse, dry, percent, Min)	-	0	-
Cl No.4.11 , Table No. 9 , i)(Peel strength, N/mm, Min)	-	750	-
Cl No.4.11 , Table No. 9 , ii)(Shear strength, kPa , Min)	-	750	-
Cl No.4.12 , Table No. 10 , i)(Limit of useful extension, percent, Min)	-	750	-
Cl No.4.13 , Table No. 11 , i)(Breaking strength of lace, N, Min)	-	500	-
Cl No.4.13 , Table No. 11 , ii)(Lace tag strength, N, Min)	-	500	-
Cl No.4.13 , Table No. 11 , iii)(Lace to lace abrasion,)	-	700	-
Cl No.4.13 , Table No. 11 , iv)("Colour fastness to water Gray Scale Rate, Min Rating")	-	500	-
Cl No.4.13 , Table No. 11 , v)(Strength of Buckle/Ski hook, N, Min)	-	500	-
Cl No.4.13 , Table No. 11 , vi)(Corrosion resistance)	-	750	-
Cl No . 4.14("Chemical Requirement on Complete Product for all Types of Sports Shoe")	-	42650	For Leather Lining with Textile or PU footbed Rs 23200 Textile Lining with Textile foot bed 19450
Cl No . 5(MARKING AND PACKING)	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	7000	-
Cl No . 4.14, Table no. 1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	3000	-
Cl No . 4.14, Table no. 1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	3000	-
Cl No . 4.14, Table no. 1 of IS 17011(iv)(Chromium (VI))	-	3000	-
Cl No . 4.14, Table no. 1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	4300	-
Cl No . 4.14, Table no. 1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	1600	-
Cl No . 4.14, Table no. 1 of IS 17011(vii)(Formaldehyde)	-	1600	-
Cl No . 4.14, Table no. 1 of IS 17011(viii)(Organotin compounds)	-	5000	-
Cl No . 4.14, Table no. 1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	5000	-
Cl No . 4.14, Table no. 1 of IS 17011(x)(pH)	-	750	-
Cl No . 4.14, Table no. 1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	4500	-
Cl No . 4.14, Table no. 1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	3000	-
Clause 4.2 - 4.2.1(Construction)	-	500	-
Clause 4.2 - 4.2.2(Construction)	-	500	-
Clause 4.3 - 4.3.1(Whole Footwear)	-	500	-
Clause 4.3 - 4.3.2(Whole Footwear)	-	500	-
Clause 4.3 - 4.3.3(Upper to Mid Sole/Out Sole Bond Performance)	-	500	-
Clause 4.3 - 4.3.4(Upper to Composite Sole Bond Performance(Applicable Only When the Sole is Composite))	-	500	-
Clause 4.3 - 4.3.5(Out Sole to Mid Sole (Multilayer) Bond)	-	500	-
Clause 4.3 - 4.3.7(Complete Shoe Flexing)	-	500	-
Clause 4.4, Table 1 ii)(Tear strength)	-	0	-
Clause 4.4, Table 1 iv)-a(Water Vapour Permeability)	-	0	-
Clause 4.4, Table 1 iv)-b(Water Vapour Coeffecient)	-	0	-
Clause 4.4, Table 1 v)(Stitch Tear Strength(Double Hole))	-	0	-
Clause 4.4, Table 2 i)(Breaking Strength)	-	0	-
Clause 4.4, Table 2 ii)(Elongation at break)	-	0	-
Clause 4.4, Table 2 iii)(Tear strength)	-	0	-
Clause 4.4, Table 2 v)-a(Water Vapour Permeability)	-	0	-
Clause 4.4, Table 2 v)-b(Water Vapour Coeffecient)	-	0	-
Clause 4.5, Table 3 i)(Tear strength)	-	0	-
Clause 4.5, Table 3 ii)(Abrasion Resistance)	-	0	-
Clause 4.5, Table 3 v)-a(Water Vapour Permeability)	-	0	-
Clause 4.5, Table 3 v)-b(Water Vapour Coeffecient)	-	0	-
Clause 4.6, Table 4 i)(Thickness)	-	0	-
Clause 4.6, Table 4 ii)(Abrasion Resistance)	-	0	-
Clause 4.6, Table 4 iv)-a(Water Absorption)	-	0	-
Clause 4.6, Table 4 iv)-b(Water Desorption)	-	0	-
Clause 4.7, Table 5 i)(Thickness)	-	0	-
Clause 4.7, Table 5 ii)(Abrasion Resistance)	-	0	-
Clause 4.7, Table 5 iii)-a(Water Absorption)	-	0	-
Clause 4.7, Table 5 iii)-b(Water Desorption)	-	0	-
Clause 4.8, Table 6 i)(Abrasion Resistance)	-	0	-
Clause 4.8, Table 6 ii)(Flexing Resistance)	-	0	-
Clause 4.8, Table 6 iii)(Hydrolysis Resistance)	-	0	-
Clause 4.9, Table 7 ii)(Split Tear strength)	-	0	-
Clause 4.9, Table 7 iii)(Heat shrinkage)	-	0	-
Cl-5, Table -1 S. No-(i) (Amendment No-1)(Insole)	-	0	-
Cl-5, Table -1 S. No- (ii) (Amendment No-1)(Toe spring height)	-	300	-
Cl-5, Table -1 S. No- (iii) (Amendment No-1)("Bond performance (a) Upper to sole/mid sole/composite sole (b) Interlayer bond strength")	-	500	-
Cl-5, Table -1 S. No- (iv) (Amendment No-1)(Energy absorption at seat region)	-	1000	-
Cl-5, Table -1 S. No- (v) (Amendment No-1)(Complete shoe flexing)	-	1000	-
Cl-5, Table -1 S. No-(vi) (Amendment No-1)(Washability)	-	1500	-
Cl-5, Table -1 S. No- (vii) (Amendment No-1)(Slip resistance, coefficient of friction (COF),)	-	1500	-
Cl-5, Table -1 S. No- (viii) (Amendment No-1)("Abrasion resistance a-Cellular sole b-Solid sole")	-	900	-
Cl-5, Table -1 S. No- (x) (Amendment No-1)(Chemical requirements)	-	23200	For Leather Lining with Textile or PU footbed Rs 23200 Textile Lining with Textile foot bed 19450
Cl-5, Table -1 S. No- (xi) (Amendment No-1)(Hydrolysis resistance)	-	4700	-
Cl-5, Table -1 S. No- (xii) (Amendment No-1)(Lead content)	-	1500	-
Cl-6, Table -2 S. No- (i) (Amendment No-1)(Tear strength)	-	500	-
Cl-6, Table -2 S. No- (ii) (Amendment No-1)("Colour fastness rubbing a-Dry: (rubbing) b-Wet: (rubbing)")	-	500	-
Cl-6, Table -2 S. No- (iii), a) (Amendment No-1)(Water vapour permeability)	-	900	-
Cl-6, Table -2 S. No- (iii), b) (Amendment No-1)(Water vapour coefficient)	-	0	-
Cl-6, Table -2 S. No- (iv),(Amendment No-1)(Stitch tear strength)	-	500	-
Cl-6, Table -2 S. No- (v),(Amendment No-1)(Colour fastness to light grey scale rate,)	-	700	-
Cl-6, Table -3 S. No- (i),(Amendment No-1)(Breaking strength, N/mm, Min)	-	500	-
Cl-6, Table -3 S. No- (ii),(Amendment No-1)("Elongation at break a-Tighter direction b-Stretch direction")	-	0	-
Cl-6, Table -3 S. No- (iii),(Amendment No-1)("Tear strength, N, Min a) For fabric b) For all other materials")	-	500	-
Cl-6, Table -3 S. No- (iv),(Amendment No-1)("Flexing resistance a- Dry condition b-Wet condition")	-	600	-
Cl-6, Table -3 S. No- (v), a (Amendment No-1)(Water vapour permeability)	-	900	-
Cl-6, Table -3 S. No- (v), b (Amendment No-1)(Water vapour coefficient)	-	0	-
Cl-6, Table -3 S. No- (vi), (Amendment No-1)(Hydrolysis resistance)	-	4500	-
Cl-6, Table -3 S. No- (vii), (Amendment No-1)(Bursting strength)	-	500	-
Cl-6, Table -4 S. No- (i),(Amendment No-1)(Tear strength, N, Min)	-	500	-
Cl-6, Table -4 S. No- (ii),(Amendment No-1)("Abrasion resistance, cycles a- Dry condition b-Wet condition")	-	900	-
Cl-6, Table -4 S. No- (iii),(Amendment No-1)(Colour fastness to rubbing , grey scale rate with 10 rubs on dry or wet, Min)	-	500	-
Cl-6, Table -4 S. No- (iv),(Amendment No-1)(Colour fastness to perspiration)	-	500	-
Cl-6, Table -4 S. No- (v), a (Amendment No-1)(Water vapour permeability)	-	900	-
Cl-6, Table -4 S. No- (v), b (Amendment No-1)(Water vapour coefficient)	-	0	-
Cl-6, Table -5 S. No- (i), (Amendment No-1)(Thickness, mm, Min)	-	200	-
Cl-6, Table -5 S. No-(ii), (Amendment No-1)(Flexing index, Min)	-	900	-
Cl-6, Table -5 S. No-(iii), (Amendment No-1)(Abrasion resistance,)	-	900	-
Cl-6, Table -5 S. No- (iv), a (Amendment No-1)(Water absorption)	-	750	-
Cl-6, Table -5 S. No- (iv), b (Amendment No-1)(Water desorption, percent)	-	0	-
Cl-6, Table -6 S. No- (i), (Amendment No-1)(Thickness, mm, Min)	-	200	-
Cl-6, Table -6 S. No- (ii), (Amendment No-1)("Abrasion resistance, cycles a- Dry condition b-Wet condition")	-	900	-
Cl-6, Table -6 S. No- (iii),a (Amendment No-1)(Water absorption)	-	750	-
Cl-6, Table -6 S. No- (iv), b (Amendment No-1)(Water desorption, percent)	-	0	-
Cl-6, Table -7 S. No- (i), (Amendment No-1)(Flexing resistance (Belt method or Bennewart method))	-	900	-
Cl-6, Table -7 S. No- (ii), (Amendment No-1)(Hydrolysis resistance, cut growth after flexes)	-	4700	-
Cl-6, Table -8 S. No- (i), (Amendment No-1)("Compression set, percent, Max a) For EVA b) For all other materials")	-	1000	-
Cl-6, Table -8 S. No- (ii), (Amendment No-1)(Split tear strength)	-	500	-
Cl-6, Table -8 S. No- (iii), (Amendment No-1)(Heat shrinkage)	-	750	-
Cl-6, Table -9 S. No- (i), (Amendment No-1)(First dry collapsing load, hardness)	-	2000	-
Cl-6, Table -9 S. No- (ii), (Amendment No-1)(Resilience, percent)	-	0	-
Cl-6, Table -9 S. No- (iii), (Amendment No-1)(Moisture resistance)	-	0	-
Cl-6, Table -9 S. No- (iv), a (Amendment No-1)(Initial dry area shape retention)	-	0	-
Cl-6, Table -9 S. No- (iv), b (Amendment No-1)(Area shape retention after 10th collapse)	-	0	-
Cl-6, Table -10 S. No- (i), (Amendment No-1)("Peel strength a) Initial b) After 5 000 wear cycles")	-	1500	-
Cl-6, Table -10 S. No- (ii), (Amendment No-1)("Shear strength a) Initial b) After 5 000 wear cycles")	-	1500	-
Cl-6, Table -11 S. No- (i), (Amendment No-1)(Limit of useful extension)	-	750	-
Cl-6, Table -12 S. No- (i), (Amendment No-1)(Breaking strength of lace)	-	500	-
Cl-6, Table -12 S. No- (ii), (Amendment No-1)(Lace tag strength)	-	500	-
Cl-6, Table -12 S. No- (iii), (Amendment No-1)(Lace to lace abrasion)	-	700	-
Cl-6, Table -12 S. No- (iv), (Amendment No-1)(Colour fastness to water (for lace) (contact method))	-	500	-
Cl-6, Table -12 S. No- (iv), (Amendment No-1)(Colour fastness to water (for lace) (contact method))	-	0	-
Cl-6, Table -12 S. No (v), (Amendment No-1)(Strength of buckle/ski hook)	-	500	-
Cl-6, Table -12 S. No- (vi), (Amendment No-1)(Corrosion resistance)	-	750	-
Cl No.4.3(Whole Footwear)	-	0	-
Cl No.4.1(Sampling and Conditioning)	-	0	-
Cl No.4.2(Construction)	-	0	-
4.3.1(Insole)	-	0	-
4.3.2(Toe spring height)	-	0	-
4.3.3(Upper to Mid Sole/Out Sole Bond Performance)	-	0	-
4.3.4("Upper to Composite Sole Bond Performance (Applicable Only When the Sole is Composite)")	-	0	-
4.3.5(Out Sole to Mid Sole (Multilayer) Bond Performance)	-	0	-
4.3.6(Energy Absorption at Seat Region)	-	0	-
4.3.7(Complete Shoe Flexing)	-	0	-
4.3.8(Washability)	-	0	-
4.3.9(Slip Resistance)	-	0	-
Cl No.4.4 , Table No. 2 , i) , a)(Flexing resistance, Dry condition)	-	0	-
Cl No.4.4 , Table No. 2 , i) , b)(Flexing resistance, Wet condition)	-	0	-
Cl No.4.4 , Table No. 2 , ii)(Tear strength (average force), Min, N)	-	0	-
Cl No.4.4 , Table No. 2 , iii) , a)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Dry: (rubbing) Rating: (Marring and staining) ")	-	0	-
Cl No.4.4 , Table No. 2 , iii) , b)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Wet: (rubbing) Rating: (Marring and staining)")	-	0	-
Cl No.4.4 , Table No. 2 , iv) , a)(Water vapour permeability, mg/cm2h, Min)	-	0	-
Cl No.4.4 , Table No. 2 , iv) , b)(Water vapour coefficient, mg/cm2 , Min)	-	0	-
Cl No.4.4 , Table No. 2 , v)(Stitch tear strength (double hole), N/mm, Min)	-	0	-
Cl No.4.4 , Table No. 2 , vi)("Colour fastness to light (Optional) Grey scale rate, Min Rating: (Marring)")	-	0	-
Cl No.4.4 , Table No. 2 , i)(Breaking strength, N/mm, Min)	-	0	-
Cl No.4.4 , Table No. 2 , ii)(Elongation at break, percent Min)	-	0	-
Cl No.4.4 , Table No. 2 , iii)(Tear strength, N, Min For Fabric: For all other materials)	-	0	-
Cl No.4.4 , Table No. 2 , iv) , a)(Flexing resistance, Dry condition)	-	0	-
Cl No.4.4 , Table No. 2 , iv) , b)(Flexing resistance, ,Wet condition)	-	0	-
Cl No.4.4 , Table No. 2 , v) , a)(Water vapour permeability, mg/cm2h, Min)	-	0	-
Cl No.4.4 , Table No. 2 , v) , b)("Water vapour coefficient, mg/cm2 , Min ")	-	0	-
Cl No.4.4 , Table No. 2 , vi)(Hydrolysis resistance)	-	0	-
Cl No.4.4 , Table No. 2 , vii)(Bursting Strength, kg/cm2 , Min)	-	0	-
Cl No.4.5 , Table No. 3 , i)(Tear strength, N, Min)	-	0	-
Cl No.4.5 , Table No. 3 , ii)(Abrasion resistance, cycles)	-	0	-
Cl No.4.5 , Table No. 3 , iii)("Colour fastness to rubbing (crocking), Grey scale rate with 10 rubs on dry or wet, Min")	-	0	-
Cl No.4.5 , Table No. 3 , iv)("Colour fastness to perspiration (contact method) Grey scale rate, Min")	-	0	-
Cl No.4.5 , Table No. 3 , v) , a)(Water vapour permeability, mg/cm2h, Min)	-	0	-
Cl No.4.5 , Table No. 3 , v) , b)("Water vapour coefficient, mg/cm2 , Min ")	-	0	-
Cl No.4.6 , Table No. 4 , i)(Thickness, mm, Min)	-	0	-
Cl No.4.6 , Table No. 4 , ii)(Flexing index, Min)	-	0	-
Cl No.4.6 , Table No. 4 , iii)(Abrasion resistance, at 400 cycles)	-	0	-
Cl No.4.6 , Table No. 4 , iv) , a)(Water Absorption, mg/cm2 , Min)	-	0	-
Cl No.4.6 , Table No. 4 , iv) , b)(Water Desorption, percent, Min)	-	0	-
Cl No.4.7, Table No. 5 , i)(Thickness, mm, Min)	-	0	-
Cl No.4.7, Table No. 5 , ii)(Abrasion resistance, cycles)	-	0	-
Cl No.4.7, Table No. 5 , iii) , a)(Water Absorption, mg/cm2 , Min)	-	0	-
Cl No.4.7, Table No. 5 , iii) , b)(Water Desorption, percent, Min)	-	0	-
Cl No.4.8 , Table No. 6 , i)(Abrasion resistance (Volume loss), mm3 , Max)	-	0	-
Cl No.4.8 , Table No. 6 , ii)("Flexing resistance Belt Method at 90 diameter Mandrel or Bennewart method, cut growth, Max")	-	0	-
Cl No.4.8 , Table No. 6 , iii)("Hydrolysis resistance, cut growth after 150 000 flexes, in mm, Max")	-	0	-
Cl No.4.9 , Table No. 7 , i)(Compression set, percent, Max)	-	0	-
Cl No.4.9 , Table No. 7 , ii)(Split tear strength, kg/25 mm, Min)	-	0	-
Cl No.4.9 , Table No. 7 , iii)(Heat shrinkage, percent, Max)	-	0	-
Cl No.4.10 , Table No. 8 , i)(First dry collapsing load, hardness, N, Min)	-	0	-
Cl No.4.10 , Table No. 8 , ii)(Resilience, percent, Min)	-	0	-
Cl No.4.10 , Table No. 8 , iii)(Moisture resistance, percent, Min)	-	0	-
Cl No.4.10 , Table No. 8 , iv) , a)(Initial dry area shape retention, percent, Min)	-	0	-
Cl No.4.10 , Table No. 8 , iv) , b)(Area shape retention after 10th collapse, dry, percent, Min)	-	0	-
Cl No.4.11 , Table No. 9 , i)(Peel strength, N/mm, Min)	-	0	-
Cl No.4.11 , Table No. 9 , ii)(Shear strength, kPa , Min)	-	0	-
Cl No.4.12 , Table No. 10 , i)(Limit of useful extension, percent, Min)	-	0	-
Cl No.4.13 , Table No. 11 , i)(Breaking strength of lace, N, Min)	-	0	-
Cl No.4.13 , Table No. 11 , ii)(Lace tag strength, N, Min)	-	0	-
Cl No.4.13 , Table No. 11 , iii)(Lace to lace abrasion,)	-	0	-
Cl No.4.13 , Table No. 11 , iv)("Colour fastness to water Gray Scale Rate, Min Rating")	-	0	-
Cl No.4.13 , Table No. 11 , v)(Strength of Buckle/Ski hook, N, Min)	-	0	-
Cl No.4.13 , Table No. 11 , vi)(Corrosion resistance)	-	0	-
Cl No . 4.14("Chemical Requirement on Complete Product for all Types of Sports Shoe")	-	0	-
Cl No . 5(MARKING AND PACKING)	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(iv)(Chromium (VI))	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(vii)(Formaldehyde)	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(viii)(Organotin compounds)	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(x)(pH)	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	0	-
Clause 4.2 - 4.2.1(Construction)	-	0	-
Clause 4.2 - 4.2.2(Construction)	-	0	-
Clause 4.3 - 4.3.1(Whole Footwear)	-	0	-
Clause 4.3 - 4.3.2(Whole Footwear)	-	0	-
Clause 4.3 - 4.3.3(Upper to Mid Sole/Out Sole Bond Performance)	-	0	-
Clause 4.3 - 4.3.4(Upper to Composite Sole Bond Performance(Applicable Only When the Sole is Composite))	-	0	-
Clause 4.3 - 4.3.5(Out Sole to Mid Sole (Multilayer) Bond)	-	0	-
Clause 4.3 - 4.3.7(Complete Shoe Flexing)	-	0	-
Clause 4.4, Table 1 ii)(Tear strength)	-	0	-
Clause 4.4, Table 1 iv)-a(Water Vapour Permeability)	-	0	-
Clause 4.4, Table 1 iv)-b(Water Vapour Coeffecient)	-	0	-
Clause 4.4, Table 1 v)(Stitch Tear Strength(Double Hole))	-	0	-
Clause 4.4, Table 2 i)(Breaking Strength)	-	0	-
Clause 4.4, Table 2 ii)(Elongation at break)	-	0	-
Clause 4.4, Table 2 iii)(Tear strength)	-	0	-
Clause 4.4, Table 2 v)-a(Water Vapour Permeability)	-	0	-
Clause 4.4, Table 2 v)-b(Water Vapour Coeffecient)	-	0	-
Clause 4.5, Table 3 i)(Tear strength)	-	0	-
Clause 4.5, Table 3 ii)(Abrasion Resistance)	-	0	-
Clause 4.5, Table 3 v)-a(Water Vapour Permeability)	-	0	-
Clause 4.5, Table 3 v)-b(Water Vapour Coeffecient)	-	0	-
Clause 4.6, Table 4 i)(Thickness)	-	0	-
Clause 4.6, Table 4 ii)(Abrasion Resistance)	-	0	-
Clause 4.6, Table 4 iv)-a(Water Absorption)	-	0	-
Clause 4.6, Table 4 iv)-b(Water Desorption)	-	0	-
Clause 4.7, Table 5 i)(Thickness)	-	0	-
Clause 4.7, Table 5 ii)(Abrasion Resistance)	-	0	-
Clause 4.7, Table 5 iii)-a(Water Absorption)	-	0	-
Clause 4.7, Table 5 iii)-b(Water Desorption)	-	0	-
Clause 4.8, Table 6 i)(Abrasion Resistance)	-	0	-
Clause 4.8, Table 6 ii)(Flexing Resistance)	-	0	-
Clause 4.8, Table 6 iii)(Hydrolysis Resistance)	-	0	-
Clause 4.9, Table 7 ii)(Split Tear strength)	-	0	-
Clause 4.9, Table 7 iii)(Heat shrinkage)	-	0	-
Cl-5, Table -1 S. No-(i) (Amendment No-1)(Insole)	-	0	-
Cl-5, Table -1 S. No- (ii) (Amendment No-1)(Toe spring height)	-	0	-
Cl-5, Table -1 S. No- (iii) (Amendment No-1)("Bond performance (a) Upper to sole/mid sole/composite sole (b) Interlayer bond strength")	-	0	-
Cl-5, Table -1 S. No- (iv) (Amendment No-1)(Energy absorption at seat region)	-	0	-
Cl-5, Table -1 S. No- (v) (Amendment No-1)(Complete shoe flexing)	-	0	-
Cl-5, Table -1 S. No-(vi) (Amendment No-1)(Washability)	-	0	-
Cl-5, Table -1 S. No- (vii) (Amendment No-1)(Slip resistance, coefficient of friction (COF),)	-	0	-
Cl-5, Table -1 S. No- (viii) (Amendment No-1)("Abrasion resistance a-Cellular sole b-Solid sole")	-	0	-
Cl-5, Table -1 S. No- (x) (Amendment No-1)(Chemical requirements)	-	0	-
Cl-5, Table -1 S. No- (xi) (Amendment No-1)(Hydrolysis resistance)	-	0	-
Cl-5, Table -1 S. No- (xii) (Amendment No-1)(Lead content)	-	0	-
Cl-6, Table -2 S. No- (i) (Amendment No-1)(Tear strength)	-	0	-
Cl-6, Table -2 S. No- (ii) (Amendment No-1)("Colour fastness rubbing a-Dry: (rubbing) b-Wet: (rubbing)")	-	0	-
Cl-6, Table -2 S. No- (iii), a) (Amendment No-1)(Water vapour permeability)	-	0	-
Cl-6, Table -2 S. No- (iii), b) (Amendment No-1)(Water vapour coefficient)	-	0	-
Cl-6, Table -2 S. No- (iv),(Amendment No-1)(Stitch tear strength)	-	0	-
Cl-6, Table -2 S. No- (v),(Amendment No-1)(Colour fastness to light grey scale rate,)	-	0	-
Cl-6, Table -3 S. No- (i),(Amendment No-1)(Breaking strength, N/mm, Min)	-	0	-
Cl-6, Table -3 S. No- (ii),(Amendment No-1)("Elongation at break a-Tighter direction b-Stretch direction")	-	0	-
Cl-6, Table -3 S. No- (iii),(Amendment No-1)("Tear strength, N, Min a) For fabric b) For all other materials")	-	0	-
Cl-6, Table -3 S. No- (iv),(Amendment No-1)("Flexing resistance a- Dry condition b-Wet condition")	-	0	-
Cl-6, Table -3 S. No- (v), a (Amendment No-1)(Water vapour permeability)	-	0	-
Cl-6, Table -3 S. No- (v), b (Amendment No-1)(Water vapour coefficient)	-	0	-
Cl-6, Table -3 S. No- (vi), (Amendment No-1)(Hydrolysis resistance)	-	0	-
Cl-6, Table -3 S. No- (vii), (Amendment No-1)(Bursting strength)	-	0	-
Cl-6, Table -4 S. No- (i),(Amendment No-1)(Tear strength, N, Min)	-	0	-
Cl-6, Table -4 S. No- (ii),(Amendment No-1)("Abrasion resistance, cycles a- Dry condition b-Wet condition")	-	0	-
Cl-6, Table -4 S. No- (iii),(Amendment No-1)(Colour fastness to rubbing , grey scale rate with 10 rubs on dry or wet, Min)	-	0	-
Cl-6, Table -4 S. No- (iv),(Amendment No-1)(Colour fastness to perspiration)	-	0	-
Cl-6, Table -4 S. No- (v), a (Amendment No-1)(Water vapour permeability)	-	0	-
Cl-6, Table -4 S. No- (v), b (Amendment No-1)(Water vapour coefficient)	-	0	-
Cl-6, Table -5 S. No- (i), (Amendment No-1)(Thickness, mm, Min)	-	0	-
Cl-6, Table -5 S. No-(ii), (Amendment No-1)(Flexing index, Min)	-	0	-
Cl-6, Table -5 S. No-(iii), (Amendment No-1)(Abrasion resistance,)	-	0	-
Cl-6, Table -5 S. No- (iv), a (Amendment No-1)(Water absorption)	-	0	-
Cl-6, Table -5 S. No- (iv), b (Amendment No-1)(Water desorption, percent)	-	0	-
Cl-6, Table -6 S. No- (i), (Amendment No-1)(Thickness, mm, Min)	-	0	-
Cl-6, Table -6 S. No- (ii), (Amendment No-1)("Abrasion resistance, cycles a- Dry condition b-Wet condition")	-	0	-
Cl-6, Table -6 S. No- (iii),a (Amendment No-1)(Water absorption)	-	0	-
Cl-6, Table -6 S. No- (iv), b (Amendment No-1)(Water desorption, percent)	-	0	-
Cl-6, Table -7 S. No- (i), (Amendment No-1)(Flexing resistance (Belt method or Bennewart method))	-	0	-
Cl-6, Table -7 S. No- (ii), (Amendment No-1)(Hydrolysis resistance, cut growth after flexes)	-	0	-
Cl-6, Table -8 S. No- (i), (Amendment No-1)("Compression set, percent, Max a) For EVA b) For all other materials")	-	0	-
Cl-6, Table -8 S. No- (ii), (Amendment No-1)(Split tear strength)	-	0	-
Cl-6, Table -8 S. No- (iii), (Amendment No-1)(Heat shrinkage)	-	0	-
Cl-6, Table -9 S. No- (i), (Amendment No-1)(First dry collapsing load, hardness)	-	0	-
Cl-6, Table -9 S. No- (ii), (Amendment No-1)(Resilience, percent)	-	0	-
Cl-6, Table -9 S. No- (iii), (Amendment No-1)(Moisture resistance)	-	0	-
Cl-6, Table -9 S. No- (iv), a (Amendment No-1)(Initial dry area shape retention)	-	0	-
Cl-6, Table -9 S. No- (iv), b (Amendment No-1)(Area shape retention after 10th collapse)	-	0	-
Cl-6, Table -10 S. No- (i), (Amendment No-1)("Peel strength a) Initial b) After 5 000 wear cycles")	-	0	-
Cl-6, Table -10 S. No- (ii), (Amendment No-1)("Shear strength a) Initial b) After 5 000 wear cycles")	-	0	-
Cl-6, Table -11 S. No- (i), (Amendment No-1)(Limit of useful extension)	-	0	-
Cl-6, Table -12 S. No- (i), (Amendment No-1)(Breaking strength of lace)	-	0	-
Cl-6, Table -12 S. No- (ii), (Amendment No-1)(Lace tag strength)	-	0	-
Cl-6, Table -12 S. No- (iii), (Amendment No-1)(Lace to lace abrasion)	-	0	-
Cl-6, Table -12 S. No- (iv), (Amendment No-1)(Colour fastness to water (for lace) (contact method))	-	0	-
Cl-6, Table -12 S. No- (iv), (Amendment No-1)(Colour fastness to water (for lace) (contact method))	-	0	-
Cl-6, Table -12 S. No (v), (Amendment No-1)(Strength of buckle/ski hook)	-	0	-
Cl-6, Table -12 S. No- (vi), (Amendment No-1)(Corrosion resistance)	-	0	-
Cl No.4.3(Whole Footwear)	-	0	-
Cl No.4.1(Sampling and Conditioning)	-	0	-
Cl No.4.2(Construction)	-	0	-
4.3.1(Insole)	-	0	-
4.3.2(Toe spring height)	-	0	-
4.3.3(Upper to Mid Sole/Out Sole Bond Performance)	-	0	-
4.3.4("Upper to Composite Sole Bond Performance (Applicable Only When the Sole is Composite)")	-	0	-
4.3.5(Out Sole to Mid Sole (Multilayer) Bond Performance)	-	0	-
4.3.6(Energy Absorption at Seat Region)	-	0	-
4.3.7(Complete Shoe Flexing)	-	0	-
4.3.8(Washability)	-	0	-
4.3.9(Slip Resistance)	-	0	-
Cl No.4.4 , Table No. 2 , i) , a)(Flexing resistance, Dry condition)	-	0	-
Cl No.4.4 , Table No. 2 , i) , b)(Flexing resistance, Wet condition)	-	0	-
Cl No.4.4 , Table No. 2 , ii)(Tear strength (average force), Min, N)	-	0	-
Cl No.4.4 , Table No. 2 , iii) , a)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Dry: (rubbing) Rating: (Marring and staining) ")	-	0	-
Cl No.4.4 , Table No. 2 , iii) , b)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Wet: (rubbing) Rating: (Marring and staining)")	-	0	-
Cl No.4.4 , Table No. 2 , iv) , a)(Water vapour permeability, mg/cm2h, Min)	-	0	-
Cl No.4.4 , Table No. 2 , iv) , b)(Water vapour coefficient, mg/cm2 , Min)	-	0	-
Cl No.4.4 , Table No. 2 , v)(Stitch tear strength (double hole), N/mm, Min)	-	0	-
Cl No.4.4 , Table No. 2 , vi)("Colour fastness to light (Optional) Grey scale rate, Min Rating: (Marring)")	-	0	-
Cl No.4.4 , Table No. 2 , i)(Breaking strength, N/mm, Min)	-	0	-
Cl No.4.4 , Table No. 2 , ii)(Elongation at break, percent Min)	-	0	-
Cl No.4.4 , Table No. 2 , iii)(Tear strength, N, Min For Fabric: For all other materials)	-	0	-
Cl No.4.4 , Table No. 2 , iv) , a)(Flexing resistance, Dry condition)	-	0	-
Cl No.4.4 , Table No. 2 , iv) , b)(Flexing resistance, ,Wet condition)	-	0	-
Cl No.4.4 , Table No. 2 , v) , a)(Water vapour permeability, mg/cm2h, Min)	-	0	-
Cl No.4.4 , Table No. 2 , v) , b)("Water vapour coefficient, mg/cm2 , Min ")	-	0	-
Cl No.4.4 , Table No. 2 , vi)(Hydrolysis resistance)	-	0	-
Cl No.4.4 , Table No. 2 , vii)(Bursting Strength, kg/cm2 , Min)	-	0	-
Cl No.4.5 , Table No. 3 , i)(Tear strength, N, Min)	-	0	-
Cl No.4.5 , Table No. 3 , ii)(Abrasion resistance, cycles)	-	0	-
Cl No.4.5 , Table No. 3 , iii)("Colour fastness to rubbing (crocking), Grey scale rate with 10 rubs on dry or wet, Min")	-	0	-
Cl No.4.5 , Table No. 3 , iv)("Colour fastness to perspiration (contact method) Grey scale rate, Min")	-	0	-
Cl No.4.5 , Table No. 3 , v) , a)(Water vapour permeability, mg/cm2h, Min)	-	0	-
Cl No.4.5 , Table No. 3 , v) , b)("Water vapour coefficient, mg/cm2 , Min ")	-	0	-
Cl No.4.6 , Table No. 4 , i)(Thickness, mm, Min)	-	0	-
Cl No.4.6 , Table No. 4 , ii)(Flexing index, Min)	-	0	-
Cl No.4.6 , Table No. 4 , iii)(Abrasion resistance, at 400 cycles)	-	0	-
Cl No.4.6 , Table No. 4 , iv) , a)(Water Absorption, mg/cm2 , Min)	-	0	-
Cl No.4.6 , Table No. 4 , iv) , b)(Water Desorption, percent, Min)	-	0	-
Cl No.4.7, Table No. 5 , i)(Thickness, mm, Min)	-	0	-
Cl No.4.7, Table No. 5 , ii)(Abrasion resistance, cycles)	-	0	-
Cl No.4.7, Table No. 5 , iii) , a)(Water Absorption, mg/cm2 , Min)	-	0	-
Cl No.4.7, Table No. 5 , iii) , b)(Water Desorption, percent, Min)	-	0	-
Cl No.4.8 , Table No. 6 , i)(Abrasion resistance (Volume loss), mm3 , Max)	-	0	-
Cl No.4.8 , Table No. 6 , ii)("Flexing resistance Belt Method at 90 diameter Mandrel or Bennewart method, cut growth, Max")	-	0	-
Cl No.4.8 , Table No. 6 , iii)("Hydrolysis resistance, cut growth after 150 000 flexes, in mm, Max")	-	0	-
Cl No.4.9 , Table No. 7 , i)(Compression set, percent, Max)	-	0	-
Cl No.4.9 , Table No. 7 , ii)(Split tear strength, kg/25 mm, Min)	-	0	-
Cl No.4.9 , Table No. 7 , iii)(Heat shrinkage, percent, Max)	-	0	-
Cl No.4.10 , Table No. 8 , i)(First dry collapsing load, hardness, N, Min)	-	0	-
Cl No.4.10 , Table No. 8 , ii)(Resilience, percent, Min)	-	0	-
Cl No.4.10 , Table No. 8 , iii)(Moisture resistance, percent, Min)	-	0	-
Cl No.4.10 , Table No. 8 , iv) , a)(Initial dry area shape retention, percent, Min)	-	0	-
Cl No.4.10 , Table No. 8 , iv) , b)(Area shape retention after 10th collapse, dry, percent, Min)	-	0	-
Cl No.4.11 , Table No. 9 , i)(Peel strength, N/mm, Min)	-	0	-
Cl No.4.11 , Table No. 9 , ii)(Shear strength, kPa , Min)	-	0	-
Cl No.4.12 , Table No. 10 , i)(Limit of useful extension, percent, Min)	-	0	-
Cl No.4.13 , Table No. 11 , i)(Breaking strength of lace, N, Min)	-	0	-
Cl No.4.13 , Table No. 11 , ii)(Lace tag strength, N, Min)	-	0	-
Cl No.4.13 , Table No. 11 , iii)(Lace to lace abrasion,)	-	0	-
Cl No.4.13 , Table No. 11 , iv)("Colour fastness to water Gray Scale Rate, Min Rating")	-	0	-
Cl No.4.13 , Table No. 11 , v)(Strength of Buckle/Ski hook, N, Min)	-	0	-
Cl No.4.13 , Table No. 11 , vi)(Corrosion resistance)	-	0	-
Cl No . 4.14("Chemical Requirement on Complete Product for all Types of Sports Shoe")	-	0	-
Cl No . 5(MARKING AND PACKING)	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(iv)(Chromium (VI))	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(vii)(Formaldehyde)	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(viii)(Organotin compounds)	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(x)(pH)	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	0	-
Clause 4.2 - 4.2.1(Construction)	-	0	-
Clause 4.2 - 4.2.2(Construction)	-	0	-
Clause 4.3 - 4.3.1(Whole Footwear)	-	0	-
Clause 4.3 - 4.3.2(Whole Footwear)	-	0	-
Clause 4.3 - 4.3.3(Upper to Mid Sole/Out Sole Bond Performance)	-	0	-
Clause 4.3 - 4.3.4(Upper to Composite Sole Bond Performance(Applicable Only When the Sole is Composite))	-	0	-
Clause 4.3 - 4.3.5(Out Sole to Mid Sole (Multilayer) Bond)	-	0	-
Clause 4.3 - 4.3.7(Complete Shoe Flexing)	-	0	-
Clause 4.4, Table 1 ii)(Tear strength)	-	0	-
Clause 4.4, Table 1 iv)-a(Water Vapour Permeability)	-	0	-
Clause 4.4, Table 1 iv)-b(Water Vapour Coeffecient)	-	0	-
Clause 4.4, Table 1 v)(Stitch Tear Strength(Double Hole))	-	0	-
Clause 4.4, Table 2 i)(Breaking Strength)	-	0	-
Clause 4.4, Table 2 ii)(Elongation at break)	-	0	-
Clause 4.4, Table 2 iii)(Tear strength)	-	0	-
Clause 4.4, Table 2 v)-a(Water Vapour Permeability)	-	0	-
Clause 4.4, Table 2 v)-b(Water Vapour Coeffecient)	-	0	-
Clause 4.5, Table 3 i)(Tear strength)	-	0	-
Clause 4.5, Table 3 ii)(Abrasion Resistance)	-	0	-
Clause 4.5, Table 3 v)-a(Water Vapour Permeability)	-	0	-
Clause 4.5, Table 3 v)-b(Water Vapour Coeffecient)	-	0	-
Clause 4.6, Table 4 i)(Thickness)	-	0	-
Clause 4.6, Table 4 ii)(Abrasion Resistance)	-	0	-
Clause 4.6, Table 4 iv)-a(Water Absorption)	-	0	-
Clause 4.6, Table 4 iv)-b(Water Desorption)	-	0	-
Clause 4.7, Table 5 i)(Thickness)	-	0	-
Clause 4.7, Table 5 ii)(Abrasion Resistance)	-	0	-
Clause 4.7, Table 5 iii)-a(Water Absorption)	-	0	-
Clause 4.7, Table 5 iii)-b(Water Desorption)	-	0	-
Clause 4.8, Table 6 i)(Abrasion Resistance)	-	0	-
Clause 4.8, Table 6 ii)(Flexing Resistance)	-	0	-
Clause 4.8, Table 6 iii)(Hydrolysis Resistance)	-	0	-
Clause 4.9, Table 7 ii)(Split Tear strength)	-	0	-
Clause 4.9, Table 7 iii)(Heat shrinkage)	-	0	-
Cl-5, Table -1 S. No-(i) (Amendment No-1)(Insole)	-	0	-
Cl-5, Table -1 S. No- (ii) (Amendment No-1)(Toe spring height)	-	0	-
Cl-5, Table -1 S. No- (iii) (Amendment No-1)("Bond performance (a) Upper to sole/mid sole/composite sole (b) Interlayer bond strength")	-	0	-
Cl-5, Table -1 S. No- (iv) (Amendment No-1)(Energy absorption at seat region)	-	0	-
Cl-5, Table -1 S. No- (v) (Amendment No-1)(Complete shoe flexing)	-	0	-
Cl-5, Table -1 S. No-(vi) (Amendment No-1)(Washability)	-	0	-
Cl-5, Table -1 S. No- (vii) (Amendment No-1)(Slip resistance, coefficient of friction (COF),)	-	0	-
Cl-5, Table -1 S. No- (viii) (Amendment No-1)("Abrasion resistance a-Cellular sole b-Solid sole")	-	0	-
Cl-5, Table -1 S. No- (x) (Amendment No-1)(Chemical requirements)	-	0	-
Cl-5, Table -1 S. No- (xi) (Amendment No-1)(Hydrolysis resistance)	-	0	-
Cl-5, Table -1 S. No- (xii) (Amendment No-1)(Lead content)	-	0	-
Cl-6, Table -2 S. No- (i) (Amendment No-1)(Tear strength)	-	0	-
Cl-6, Table -2 S. No- (ii) (Amendment No-1)("Colour fastness rubbing a-Dry: (rubbing) b-Wet: (rubbing)")	-	0	-
Cl-6, Table -2 S. No- (iii), a) (Amendment No-1)(Water vapour permeability)	-	0	-
Cl-6, Table -2 S. No- (iii), b) (Amendment No-1)(Water vapour coefficient)	-	0	-
Cl-6, Table -2 S. No- (iv),(Amendment No-1)(Stitch tear strength)	-	0	-
Cl-6, Table -2 S. No- (v),(Amendment No-1)(Colour fastness to light grey scale rate,)	-	0	-
Cl-6, Table -3 S. No- (i),(Amendment No-1)(Breaking strength, N/mm, Min)	-	0	-
Cl-6, Table -3 S. No- (ii),(Amendment No-1)("Elongation at break a-Tighter direction b-Stretch direction")	-	0	-
Cl-6, Table -3 S. No- (iii),(Amendment No-1)("Tear strength, N, Min a) For fabric b) For all other materials")	-	0	-
Cl-6, Table -3 S. No- (iv),(Amendment No-1)("Flexing resistance a- Dry condition b-Wet condition")	-	0	-
Cl-6, Table -3 S. No- (v), a (Amendment No-1)(Water vapour permeability)	-	0	-
Cl-6, Table -3 S. No- (v), b (Amendment No-1)(Water vapour coefficient)	-	0	-
Cl-6, Table -3 S. No- (vi), (Amendment No-1)(Hydrolysis resistance)	-	0	-
Cl-6, Table -3 S. No- (vii), (Amendment No-1)(Bursting strength)	-	0	-
Cl-6, Table -4 S. No- (i),(Amendment No-1)(Tear strength, N, Min)	-	0	-
Cl-6, Table -4 S. No- (ii),(Amendment No-1)("Abrasion resistance, cycles a- Dry condition b-Wet condition")	-	0	-
Cl-6, Table -4 S. No- (iii),(Amendment No-1)(Colour fastness to rubbing , grey scale rate with 10 rubs on dry or wet, Min)	-	0	-
Cl-6, Table -4 S. No- (iv),(Amendment No-1)(Colour fastness to perspiration)	-	0	-
Cl-6, Table -4 S. No- (v), a (Amendment No-1)(Water vapour permeability)	-	0	-
Cl-6, Table -4 S. No- (v), b (Amendment No-1)(Water vapour coefficient)	-	0	-
Cl-6, Table -5 S. No- (i), (Amendment No-1)(Thickness, mm, Min)	-	0	-
Cl-6, Table -5 S. No-(ii), (Amendment No-1)(Flexing index, Min)	-	0	-
Cl-6, Table -5 S. No-(iii), (Amendment No-1)(Abrasion resistance,)	-	0	-
Cl-6, Table -5 S. No- (iv), a (Amendment No-1)(Water absorption)	-	0	-
Cl-6, Table -5 S. No- (iv), b (Amendment No-1)(Water desorption, percent)	-	0	-
Cl-6, Table -6 S. No- (i), (Amendment No-1)(Thickness, mm, Min)	-	0	-
Cl-6, Table -6 S. No- (ii), (Amendment No-1)("Abrasion resistance, cycles a- Dry condition b-Wet condition")	-	0	-
Cl-6, Table -6 S. No- (iii),a (Amendment No-1)(Water absorption)	-	0	-
Cl-6, Table -6 S. No- (iv), b (Amendment No-1)(Water desorption, percent)	-	0	-
Cl-6, Table -7 S. No- (i), (Amendment No-1)(Flexing resistance (Belt method or Bennewart method))	-	0	-
Cl-6, Table -7 S. No- (ii), (Amendment No-1)(Hydrolysis resistance, cut growth after flexes)	-	0	-
Cl-6, Table -8 S. No- (i), (Amendment No-1)("Compression set, percent, Max a) For EVA b) For all other materials")	-	0	-
Cl-6, Table -8 S. No- (ii), (Amendment No-1)(Split tear strength)	-	0	-
Cl-6, Table -8 S. No- (iii), (Amendment No-1)(Heat shrinkage)	-	0	-
Cl-6, Table -9 S. No- (i), (Amendment No-1)(First dry collapsing load, hardness)	-	0	-
Cl-6, Table -9 S. No- (ii), (Amendment No-1)(Resilience, percent)	-	0	-
Cl-6, Table -9 S. No- (iii), (Amendment No-1)(Moisture resistance)	-	0	-
Cl-6, Table -9 S. No- (iv), a (Amendment No-1)(Initial dry area shape retention)	-	0	-
Cl-6, Table -9 S. No- (iv), b (Amendment No-1)(Area shape retention after 10th collapse)	-	0	-
Cl-6, Table -10 S. No- (i), (Amendment No-1)("Peel strength a) Initial b) After 5 000 wear cycles")	-	0	-
Cl-6, Table -10 S. No- (ii), (Amendment No-1)("Shear strength a) Initial b) After 5 000 wear cycles")	-	0	-
Cl-6, Table -11 S. No- (i), (Amendment No-1)(Limit of useful extension)	-	0	-
Cl-6, Table -12 S. No- (i), (Amendment No-1)(Breaking strength of lace)	-	0	-
Cl-6, Table -12 S. No- (ii), (Amendment No-1)(Lace tag strength)	-	0	-
Cl-6, Table -12 S. No- (iii), (Amendment No-1)(Lace to lace abrasion)	-	0	-
Cl-6, Table -12 S. No- (iv), (Amendment No-1)(Colour fastness to water (for lace) (contact method))	-	0	-
Cl-6, Table -12 S. No- (iv), (Amendment No-1)(Colour fastness to water (for lace) (contact method))	-	0	-
Cl-6, Table -12 S. No (v), (Amendment No-1)(Strength of buckle/ski hook)	-	0	-
Cl-6, Table -12 S. No- (vi), (Amendment No-1)(Corrosion resistance)	-	0	-
Cl No.4.3(Whole Footwear)	-	0	-
Cl No.4.1(Sampling and Conditioning)	-	0	-
Cl No.4.2(Construction)	-	0	-
4.3.1(Insole)	-	0	-
4.3.2(Toe spring height)	-	0	-
4.3.3(Upper to Mid Sole/Out Sole Bond Performance)	-	0	-
4.3.4("Upper to Composite Sole Bond Performance (Applicable Only When the Sole is Composite)")	-	0	-
4.3.5(Out Sole to Mid Sole (Multilayer) Bond Performance)	-	0	-
4.3.6(Energy Absorption at Seat Region)	-	0	-
4.3.7(Complete Shoe Flexing)	-	0	-
4.3.8(Washability)	-	0	-
4.3.9(Slip Resistance)	-	0	-
Cl No.4.4 , Table No. 2 , i) , a)(Flexing resistance, Dry condition)	-	0	-
Cl No.4.4 , Table No. 2 , i) , b)(Flexing resistance, Wet condition)	-	0	-
Cl No.4.4 , Table No. 2 , ii)(Tear strength (average force), Min, N)	-	0	-
Cl No.4.4 , Table No. 2 , iii) , a)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Dry: (rubbing) Rating: (Marring and staining) ")	-	0	-
Cl No.4.4 , Table No. 2 , iii) , b)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Wet: (rubbing) Rating: (Marring and staining)")	-	0	-
Cl No.4.4 , Table No. 2 , iv) , a)(Water vapour permeability, mg/cm2h, Min)	-	0	-
Cl No.4.4 , Table No. 2 , iv) , b)(Water vapour coefficient, mg/cm2 , Min)	-	0	-
Cl No.4.4 , Table No. 2 , v)(Stitch tear strength (double hole), N/mm, Min)	-	0	-
Cl No.4.4 , Table No. 2 , vi)("Colour fastness to light (Optional) Grey scale rate, Min Rating: (Marring)")	-	0	-
Cl No.4.4 , Table No. 2 , i)(Breaking strength, N/mm, Min)	-	0	-
Cl No.4.4 , Table No. 2 , ii)(Elongation at break, percent Min)	-	0	-
Cl No.4.4 , Table No. 2 , iii)(Tear strength, N, Min For Fabric: For all other materials)	-	0	-
Cl No.4.4 , Table No. 2 , iv) , a)(Flexing resistance, Dry condition)	-	0	-
Cl No.4.4 , Table No. 2 , iv) , b)(Flexing resistance, ,Wet condition)	-	0	-
Cl No.4.4 , Table No. 2 , v) , a)(Water vapour permeability, mg/cm2h, Min)	-	0	-
Cl No.4.4 , Table No. 2 , v) , b)("Water vapour coefficient, mg/cm2 , Min ")	-	0	-
Cl No.4.4 , Table No. 2 , vi)(Hydrolysis resistance)	-	0	-
Cl No.4.4 , Table No. 2 , vii)(Bursting Strength, kg/cm2 , Min)	-	0	-
Cl No.4.5 , Table No. 3 , i)(Tear strength, N, Min)	-	0	-
Cl No.4.5 , Table No. 3 , ii)(Abrasion resistance, cycles)	-	0	-
Cl No.4.5 , Table No. 3 , iii)("Colour fastness to rubbing (crocking), Grey scale rate with 10 rubs on dry or wet, Min")	-	0	-
Cl No.4.5 , Table No. 3 , iv)("Colour fastness to perspiration (contact method) Grey scale rate, Min")	-	0	-
Cl No.4.5 , Table No. 3 , v) , a)(Water vapour permeability, mg/cm2h, Min)	-	0	-
Cl No.4.5 , Table No. 3 , v) , b)("Water vapour coefficient, mg/cm2 , Min ")	-	0	-
Cl No.4.6 , Table No. 4 , i)(Thickness, mm, Min)	-	0	-
Cl No.4.6 , Table No. 4 , ii)(Flexing index, Min)	-	0	-
Cl No.4.6 , Table No. 4 , iii)(Abrasion resistance, at 400 cycles)	-	0	-
Cl No.4.6 , Table No. 4 , iv) , a)(Water Absorption, mg/cm2 , Min)	-	0	-
Cl No.4.6 , Table No. 4 , iv) , b)(Water Desorption, percent, Min)	-	0	-
Cl No.4.7, Table No. 5 , i)(Thickness, mm, Min)	-	0	-
Cl No.4.7, Table No. 5 , ii)(Abrasion resistance, cycles)	-	0	-
Cl No.4.7, Table No. 5 , iii) , a)(Water Absorption, mg/cm2 , Min)	-	0	-
Cl No.4.7, Table No. 5 , iii) , b)(Water Desorption, percent, Min)	-	0	-
Cl No.4.8 , Table No. 6 , i)(Abrasion resistance (Volume loss), mm3 , Max)	-	0	-
Cl No.4.8 , Table No. 6 , ii)("Flexing resistance Belt Method at 90 diameter Mandrel or Bennewart method, cut growth, Max")	-	0	-
Cl No.4.8 , Table No. 6 , iii)("Hydrolysis resistance, cut growth after 150 000 flexes, in mm, Max")	-	0	-
Cl No.4.9 , Table No. 7 , i)(Compression set, percent, Max)	-	0	-
Cl No.4.9 , Table No. 7 , ii)(Split tear strength, kg/25 mm, Min)	-	0	-
Cl No.4.9 , Table No. 7 , iii)(Heat shrinkage, percent, Max)	-	0	-
Cl No.4.10 , Table No. 8 , i)(First dry collapsing load, hardness, N, Min)	-	0	-
Cl No.4.10 , Table No. 8 , ii)(Resilience, percent, Min)	-	0	-
Cl No.4.10 , Table No. 8 , iii)(Moisture resistance, percent, Min)	-	0	-
Cl No.4.10 , Table No. 8 , iv) , a)(Initial dry area shape retention, percent, Min)	-	0	-
Cl No.4.10 , Table No. 8 , iv) , b)(Area shape retention after 10th collapse, dry, percent, Min)	-	0	-
Cl No.4.11 , Table No. 9 , i)(Peel strength, N/mm, Min)	-	0	-
Cl No.4.11 , Table No. 9 , ii)(Shear strength, kPa , Min)	-	0	-
Cl No.4.12 , Table No. 10 , i)(Limit of useful extension, percent, Min)	-	0	-
Cl No.4.13 , Table No. 11 , i)(Breaking strength of lace, N, Min)	-	0	-
Cl No.4.13 , Table No. 11 , ii)(Lace tag strength, N, Min)	-	0	-
Cl No.4.13 , Table No. 11 , iii)(Lace to lace abrasion,)	-	0	-
Cl No.4.13 , Table No. 11 , iv)("Colour fastness to water Gray Scale Rate, Min Rating")	-	0	-
Cl No.4.13 , Table No. 11 , v)(Strength of Buckle/Ski hook, N, Min)	-	0	-
Cl No.4.13 , Table No. 11 , vi)(Corrosion resistance)	-	0	-
Cl No . 4.14("Chemical Requirement on Complete Product for all Types of Sports Shoe")	-	0	-
Cl No . 5(MARKING AND PACKING)	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(iv)(Chromium (VI))	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(vii)(Formaldehyde)	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(viii)(Organotin compounds)	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(x)(pH)	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	0	-
Clause 4.2 - 4.2.1(Construction)	-	0	-
Clause 4.2 - 4.2.2(Construction)	-	0	-
Clause 4.3 - 4.3.1(Whole Footwear)	-	0	-
Clause 4.3 - 4.3.2(Whole Footwear)	-	0	-
Clause 4.3 - 4.3.3(Upper to Mid Sole/Out Sole Bond Performance)	-	0	-
Clause 4.3 - 4.3.4(Upper to Composite Sole Bond Performance(Applicable Only When the Sole is Composite))	-	0	-
Clause 4.3 - 4.3.5(Out Sole to Mid Sole (Multilayer) Bond)	-	0	-
Clause 4.3 - 4.3.7(Complete Shoe Flexing)	-	0	-
Clause 4.4, Table 1 ii)(Tear strength)	-	0	-
Clause 4.4, Table 1 iv)-a(Water Vapour Permeability)	-	0	-
Clause 4.4, Table 1 iv)-b(Water Vapour Coeffecient)	-	0	-
Clause 4.4, Table 1 v)(Stitch Tear Strength(Double Hole))	-	0	-
Clause 4.4, Table 2 i)(Breaking Strength)	-	0	-
Clause 4.4, Table 2 ii)(Elongation at break)	-	0	-
Clause 4.4, Table 2 iii)(Tear strength)	-	0	-
Clause 4.4, Table 2 v)-a(Water Vapour Permeability)	-	0	-
Clause 4.4, Table 2 v)-b(Water Vapour Coeffecient)	-	0	-
Clause 4.5, Table 3 i)(Tear strength)	-	0	-
Clause 4.5, Table 3 ii)(Abrasion Resistance)	-	0	-
Clause 4.5, Table 3 v)-a(Water Vapour Permeability)	-	0	-
Clause 4.5, Table 3 v)-b(Water Vapour Coeffecient)	-	0	-
Clause 4.6, Table 4 i)(Thickness)	-	0	-
Clause 4.6, Table 4 ii)(Abrasion Resistance)	-	0	-
Clause 4.6, Table 4 iv)-a(Water Absorption)	-	0	-
Clause 4.6, Table 4 iv)-b(Water Desorption)	-	0	-
Clause 4.7, Table 5 i)(Thickness)	-	0	-
Clause 4.7, Table 5 ii)(Abrasion Resistance)	-	0	-
Clause 4.7, Table 5 iii)-a(Water Absorption)	-	0	-
Clause 4.7, Table 5 iii)-b(Water Desorption)	-	0	-
Clause 4.8, Table 6 i)(Abrasion Resistance)	-	0	-
Clause 4.8, Table 6 ii)(Flexing Resistance)	-	0	-
Clause 4.8, Table 6 iii)(Hydrolysis Resistance)	-	0	-
Clause 4.9, Table 7 ii)(Split Tear strength)	-	0	-
Clause 4.9, Table 7 iii)(Heat shrinkage)	-	0	-
Cl-5, Table -1 S. No-(i) (Amendment No-1)(Insole)	-	0	-
Cl-5, Table -1 S. No- (ii) (Amendment No-1)(Toe spring height)	-	0	-
Cl-5, Table -1 S. No- (iii) (Amendment No-1)("Bond performance (a) Upper to sole/mid sole/composite sole (b) Interlayer bond strength")	-	0	-
Cl-5, Table -1 S. No- (iv) (Amendment No-1)(Energy absorption at seat region)	-	0	-
Cl-5, Table -1 S. No- (v) (Amendment No-1)(Complete shoe flexing)	-	0	-
Cl-5, Table -1 S. No-(vi) (Amendment No-1)(Washability)	-	0	-
Cl-5, Table -1 S. No- (vii) (Amendment No-1)(Slip resistance, coefficient of friction (COF),)	-	0	-
Cl-5, Table -1 S. No- (viii) (Amendment No-1)("Abrasion resistance a-Cellular sole b-Solid sole")	-	0	-
Cl-5, Table -1 S. No- (x) (Amendment No-1)(Chemical requirements)	-	0	-
Cl-5, Table -1 S. No- (xi) (Amendment No-1)(Hydrolysis resistance)	-	0	-
Cl-5, Table -1 S. No- (xii) (Amendment No-1)(Lead content)	-	0	-
Cl-6, Table -2 S. No- (i) (Amendment No-1)(Tear strength)	-	0	-
Cl-6, Table -2 S. No- (ii) (Amendment No-1)("Colour fastness rubbing a-Dry: (rubbing) b-Wet: (rubbing)")	-	0	-
Cl-6, Table -2 S. No- (iii), a) (Amendment No-1)(Water vapour permeability)	-	0	-
Cl-6, Table -2 S. No- (iii), b) (Amendment No-1)(Water vapour coefficient)	-	0	-
Cl-6, Table -2 S. No- (iv),(Amendment No-1)(Stitch tear strength)	-	0	-
Cl-6, Table -2 S. No- (v),(Amendment No-1)(Colour fastness to light grey scale rate,)	-	0	-
Cl-6, Table -3 S. No- (i),(Amendment No-1)(Breaking strength, N/mm, Min)	-	0	-
Cl-6, Table -3 S. No- (ii),(Amendment No-1)("Elongation at break a-Tighter direction b-Stretch direction")	-	0	-
Cl-6, Table -3 S. No- (iii),(Amendment No-1)("Tear strength, N, Min a) For fabric b) For all other materials")	-	0	-
Cl-6, Table -3 S. No- (iv),(Amendment No-1)("Flexing resistance a- Dry condition b-Wet condition")	-	0	-
Cl-6, Table -3 S. No- (v), a (Amendment No-1)(Water vapour permeability)	-	0	-
Cl-6, Table -3 S. No- (v), b (Amendment No-1)(Water vapour coefficient)	-	0	-
Cl-6, Table -3 S. No- (vi), (Amendment No-1)(Hydrolysis resistance)	-	0	-
Cl-6, Table -3 S. No- (vii), (Amendment No-1)(Bursting strength)	-	0	-
Cl-6, Table -4 S. No- (i),(Amendment No-1)(Tear strength, N, Min)	-	0	-
Cl-6, Table -4 S. No- (ii),(Amendment No-1)("Abrasion resistance, cycles a- Dry condition b-Wet condition")	-	0	-
Cl-6, Table -4 S. No- (iii),(Amendment No-1)(Colour fastness to rubbing , grey scale rate with 10 rubs on dry or wet, Min)	-	0	-
Cl-6, Table -4 S. No- (iv),(Amendment No-1)(Colour fastness to perspiration)	-	0	-
Cl-6, Table -4 S. No- (v), a (Amendment No-1)(Water vapour permeability)	-	0	-
Cl-6, Table -4 S. No- (v), b (Amendment No-1)(Water vapour coefficient)	-	0	-
Cl-6, Table -5 S. No- (i), (Amendment No-1)(Thickness, mm, Min)	-	0	-
Cl-6, Table -5 S. No-(ii), (Amendment No-1)(Flexing index, Min)	-	0	-
Cl-6, Table -5 S. No-(iii), (Amendment No-1)(Abrasion resistance,)	-	0	-
Cl-6, Table -5 S. No- (iv), a (Amendment No-1)(Water absorption)	-	0	-
Cl-6, Table -5 S. No- (iv), b (Amendment No-1)(Water desorption, percent)	-	0	-
Cl-6, Table -6 S. No- (i), (Amendment No-1)(Thickness, mm, Min)	-	0	-
Cl-6, Table -6 S. No- (ii), (Amendment No-1)("Abrasion resistance, cycles a- Dry condition b-Wet condition")	-	0	-
Cl-6, Table -6 S. No- (iii),a (Amendment No-1)(Water absorption)	-	0	-
Cl-6, Table -6 S. No- (iv), b (Amendment No-1)(Water desorption, percent)	-	0	-
Cl-6, Table -7 S. No- (i), (Amendment No-1)(Flexing resistance (Belt method or Bennewart method))	-	0	-
Cl-6, Table -7 S. No- (ii), (Amendment No-1)(Hydrolysis resistance, cut growth after flexes)	-	0	-
Cl-6, Table -8 S. No- (i), (Amendment No-1)("Compression set, percent, Max a) For EVA b) For all other materials")	-	0	-
Cl-6, Table -8 S. No- (ii), (Amendment No-1)(Split tear strength)	-	0	-
Cl-6, Table -8 S. No- (iii), (Amendment No-1)(Heat shrinkage)	-	0	-
Cl-6, Table -9 S. No- (i), (Amendment No-1)(First dry collapsing load, hardness)	-	0	-
Cl-6, Table -9 S. No- (ii), (Amendment No-1)(Resilience, percent)	-	0	-
Cl-6, Table -9 S. No- (iii), (Amendment No-1)(Moisture resistance)	-	0	-
Cl-6, Table -9 S. No- (iv), a (Amendment No-1)(Initial dry area shape retention)	-	0	-
Cl-6, Table -9 S. No- (iv), b (Amendment No-1)(Area shape retention after 10th collapse)	-	0	-
Cl-6, Table -10 S. No- (i), (Amendment No-1)("Peel strength a) Initial b) After 5 000 wear cycles")	-	0	-
Cl-6, Table -10 S. No- (ii), (Amendment No-1)("Shear strength a) Initial b) After 5 000 wear cycles")	-	0	-
Cl-6, Table -11 S. No- (i), (Amendment No-1)(Limit of useful extension)	-	0	-
Cl-6, Table -12 S. No- (i), (Amendment No-1)(Breaking strength of lace)	-	0	-
Cl-6, Table -12 S. No- (ii), (Amendment No-1)(Lace tag strength)	-	0	-
Cl-6, Table -12 S. No- (iii), (Amendment No-1)(Lace to lace abrasion)	-	0	-
Cl-6, Table -12 S. No- (iv), (Amendment No-1)(Colour fastness to water (for lace) (contact method))	-	0	-
Cl-6, Table -12 S. No- (iv), (Amendment No-1)(Colour fastness to water (for lace) (contact method))	-	0	-
Cl-6, Table -12 S. No (v), (Amendment No-1)(Strength of buckle/ski hook)	-	0	-
Cl-6, Table -12 S. No- (vi), (Amendment No-1)(Corrosion resistance)	-	0	-
Cl No.4.3(Whole Footwear)	-	0	-
Cl No.4.1(Sampling and Conditioning)	-	0	-
Cl No.4.2(Construction)	-	0	-
4.3.1(Insole)	-	0	-
4.3.2(Toe spring height)	-	0	-
4.3.3(Upper to Mid Sole/Out Sole Bond Performance)	-	0	-
4.3.4("Upper to Composite Sole Bond Performance (Applicable Only When the Sole is Composite)")	-	0	-
4.3.5(Out Sole to Mid Sole (Multilayer) Bond Performance)	-	0	-
4.3.6(Energy Absorption at Seat Region)	-	0	-
4.3.7(Complete Shoe Flexing)	-	0	-
4.3.8(Washability)	-	0	-
4.3.9(Slip Resistance)	-	0	-
Cl No.4.4 , Table No. 2 , i) , a)(Flexing resistance, Dry condition)	-	0	-
Cl No.4.4 , Table No. 2 , i) , b)(Flexing resistance, Wet condition)	-	0	-
Cl No.4.4 , Table No. 2 , ii)(Tear strength (average force), Min, N)	-	0	-
Cl No.4.4 , Table No. 2 , iii) , a)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Dry: (rubbing) Rating: (Marring and staining) ")	-	0	-
Cl No.4.4 , Table No. 2 , iii) , b)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Wet: (rubbing) Rating: (Marring and staining)")	-	0	-
Cl No.4.4 , Table No. 2 , iv) , a)(Water vapour permeability, mg/cm2h, Min)	-	0	-
Cl No.4.4 , Table No. 2 , iv) , b)(Water vapour coefficient, mg/cm2 , Min)	-	0	-
Cl No.4.4 , Table No. 2 , v)(Stitch tear strength (double hole), N/mm, Min)	-	0	-
Cl No.4.4 , Table No. 2 , vi)("Colour fastness to light (Optional) Grey scale rate, Min Rating: (Marring)")	-	0	-
Cl No.4.4 , Table No. 2 , i)(Breaking strength, N/mm, Min)	-	0	-
Cl No.4.4 , Table No. 2 , ii)(Elongation at break, percent Min)	-	0	-
Cl No.4.4 , Table No. 2 , iii)(Tear strength, N, Min For Fabric: For all other materials)	-	0	-
Cl No.4.4 , Table No. 2 , iv) , a)(Flexing resistance, Dry condition)	-	0	-
Cl No.4.4 , Table No. 2 , iv) , b)(Flexing resistance, ,Wet condition)	-	0	-
Cl No.4.4 , Table No. 2 , v) , a)(Water vapour permeability, mg/cm2h, Min)	-	0	-
Cl No.4.4 , Table No. 2 , v) , b)("Water vapour coefficient, mg/cm2 , Min ")	-	0	-
Cl No.4.4 , Table No. 2 , vi)(Hydrolysis resistance)	-	0	-
Cl No.4.4 , Table No. 2 , vii)(Bursting Strength, kg/cm2 , Min)	-	0	-
Cl No.4.5 , Table No. 3 , i)(Tear strength, N, Min)	-	0	-
Cl No.4.5 , Table No. 3 , ii)(Abrasion resistance, cycles)	-	0	-
Cl No.4.5 , Table No. 3 , iii)("Colour fastness to rubbing (crocking), Grey scale rate with 10 rubs on dry or wet, Min")	-	0	-
Cl No.4.5 , Table No. 3 , iv)("Colour fastness to perspiration (contact method) Grey scale rate, Min")	-	0	-
Cl No.4.5 , Table No. 3 , v) , a)(Water vapour permeability, mg/cm2h, Min)	-	0	-
Cl No.4.5 , Table No. 3 , v) , b)("Water vapour coefficient, mg/cm2 , Min ")	-	0	-
Cl No.4.6 , Table No. 4 , i)(Thickness, mm, Min)	-	0	-
Cl No.4.6 , Table No. 4 , ii)(Flexing index, Min)	-	0	-
Cl No.4.6 , Table No. 4 , iii)(Abrasion resistance, at 400 cycles)	-	0	-
Cl No.4.6 , Table No. 4 , iv) , a)(Water Absorption, mg/cm2 , Min)	-	0	-
Cl No.4.6 , Table No. 4 , iv) , b)(Water Desorption, percent, Min)	-	0	-
Cl No.4.7, Table No. 5 , i)(Thickness, mm, Min)	-	0	-
Cl No.4.7, Table No. 5 , ii)(Abrasion resistance, cycles)	-	0	-
Cl No.4.7, Table No. 5 , iii) , a)(Water Absorption, mg/cm2 , Min)	-	0	-
Cl No.4.7, Table No. 5 , iii) , b)(Water Desorption, percent, Min)	-	0	-
Cl No.4.8 , Table No. 6 , i)(Abrasion resistance (Volume loss), mm3 , Max)	-	0	-
Cl No.4.8 , Table No. 6 , ii)("Flexing resistance Belt Method at 90 diameter Mandrel or Bennewart method, cut growth, Max")	-	0	-
Cl No.4.8 , Table No. 6 , iii)("Hydrolysis resistance, cut growth after 150 000 flexes, in mm, Max")	-	0	-
Cl No.4.9 , Table No. 7 , i)(Compression set, percent, Max)	-	0	-
Cl No.4.9 , Table No. 7 , ii)(Split tear strength, kg/25 mm, Min)	-	0	-
Cl No.4.9 , Table No. 7 , iii)(Heat shrinkage, percent, Max)	-	0	-
Cl No.4.10 , Table No. 8 , i)(First dry collapsing load, hardness, N, Min)	-	0	-
Cl No.4.10 , Table No. 8 , ii)(Resilience, percent, Min)	-	0	-
Cl No.4.10 , Table No. 8 , iii)(Moisture resistance, percent, Min)	-	0	-
Cl No.4.10 , Table No. 8 , iv) , a)(Initial dry area shape retention, percent, Min)	-	0	-
Cl No.4.10 , Table No. 8 , iv) , b)(Area shape retention after 10th collapse, dry, percent, Min)	-	0	-
Cl No.4.11 , Table No. 9 , i)(Peel strength, N/mm, Min)	-	0	-
Cl No.4.11 , Table No. 9 , ii)(Shear strength, kPa , Min)	-	0	-
Cl No.4.12 , Table No. 10 , i)(Limit of useful extension, percent, Min)	-	0	-
Cl No.4.13 , Table No. 11 , i)(Breaking strength of lace, N, Min)	-	0	-
Cl No.4.13 , Table No. 11 , ii)(Lace tag strength, N, Min)	-	0	-
Cl No.4.13 , Table No. 11 , iii)(Lace to lace abrasion,)	-	0	-
Cl No.4.13 , Table No. 11 , iv)("Colour fastness to water Gray Scale Rate, Min Rating")	-	0	-
Cl No.4.13 , Table No. 11 , v)(Strength of Buckle/Ski hook, N, Min)	-	0	-
Cl No.4.13 , Table No. 11 , vi)(Corrosion resistance)	-	0	-
Cl No . 4.14("Chemical Requirement on Complete Product for all Types of Sports Shoe")	-	0	-
Cl No . 5(MARKING AND PACKING)	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(iv)(Chromium (VI))	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(vii)(Formaldehyde)	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(viii)(Organotin compounds)	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(x)(pH)	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	0	-
Clause 4.2 - 4.2.1(Construction)	-	0	-
Clause 4.2 - 4.2.2(Construction)	-	0	-
Clause 4.3 - 4.3.1(Whole Footwear)	-	0	-
Clause 4.3 - 4.3.2(Whole Footwear)	-	0	-
Clause 4.3 - 4.3.3(Upper to Mid Sole/Out Sole Bond Performance)	-	0	-
Clause 4.3 - 4.3.4(Upper to Composite Sole Bond Performance(Applicable Only When the Sole is Composite))	-	0	-
Clause 4.3 - 4.3.5(Out Sole to Mid Sole (Multilayer) Bond)	-	0	-
Clause 4.3 - 4.3.7(Complete Shoe Flexing)	-	0	-
Clause 4.4, Table 1 ii)(Tear strength)	-	0	-
Clause 4.4, Table 1 iv)-a(Water Vapour Permeability)	-	0	-
Clause 4.4, Table 1 iv)-b(Water Vapour Coeffecient)	-	0	-
Clause 4.4, Table 1 v)(Stitch Tear Strength(Double Hole))	-	0	-
Clause 4.4, Table 2 i)(Breaking Strength)	-	0	-
Clause 4.4, Table 2 ii)(Elongation at break)	-	0	-
Clause 4.4, Table 2 iii)(Tear strength)	-	0	-
Clause 4.4, Table 2 v)-a(Water Vapour Permeability)	-	0	-
Clause 4.4, Table 2 v)-b(Water Vapour Coeffecient)	-	0	-
Clause 4.5, Table 3 i)(Tear strength)	-	0	-
Clause 4.5, Table 3 ii)(Abrasion Resistance)	-	0	-
Clause 4.5, Table 3 v)-a(Water Vapour Permeability)	-	0	-
Clause 4.5, Table 3 v)-b(Water Vapour Coeffecient)	-	0	-
Clause 4.6, Table 4 i)(Thickness)	-	0	-
Clause 4.6, Table 4 ii)(Abrasion Resistance)	-	0	-
Clause 4.6, Table 4 iv)-a(Water Absorption)	-	0	-
Clause 4.6, Table 4 iv)-b(Water Desorption)	-	0	-
Clause 4.7, Table 5 i)(Thickness)	-	0	-
Clause 4.7, Table 5 ii)(Abrasion Resistance)	-	0	-
Clause 4.7, Table 5 iii)-a(Water Absorption)	-	0	-
Clause 4.7, Table 5 iii)-b(Water Desorption)	-	0	-
Clause 4.8, Table 6 i)(Abrasion Resistance)	-	0	-
Clause 4.8, Table 6 ii)(Flexing Resistance)	-	0	-
Clause 4.8, Table 6 iii)(Hydrolysis Resistance)	-	0	-
Clause 4.9, Table 7 ii)(Split Tear strength)	-	0	-
Clause 4.9, Table 7 iii)(Heat shrinkage)	-	0	-
Cl-5, Table -1 S. No-(i) (Amendment No-1)(Insole)	-	0	-
Cl-5, Table -1 S. No- (ii) (Amendment No-1)(Toe spring height)	-	0	-
Cl-5, Table -1 S. No- (iii) (Amendment No-1)("Bond performance (a) Upper to sole/mid sole/composite sole (b) Interlayer bond strength")	-	0	-
Cl-5, Table -1 S. No- (iv) (Amendment No-1)(Energy absorption at seat region)	-	0	-
Cl-5, Table -1 S. No- (v) (Amendment No-1)(Complete shoe flexing)	-	0	-
Cl-5, Table -1 S. No-(vi) (Amendment No-1)(Washability)	-	0	-
Cl-5, Table -1 S. No- (vii) (Amendment No-1)(Slip resistance, coefficient of friction (COF),)	-	0	-
Cl-5, Table -1 S. No- (viii) (Amendment No-1)("Abrasion resistance a-Cellular sole b-Solid sole")	-	0	-
Cl-5, Table -1 S. No- (x) (Amendment No-1)(Chemical requirements)	-	0	-
Cl-5, Table -1 S. No- (xi) (Amendment No-1)(Hydrolysis resistance)	-	0	-
Cl-5, Table -1 S. No- (xii) (Amendment No-1)(Lead content)	-	0	-
Cl-6, Table -2 S. No- (i) (Amendment No-1)(Tear strength)	-	0	-
Cl-6, Table -2 S. No- (ii) (Amendment No-1)("Colour fastness rubbing a-Dry: (rubbing) b-Wet: (rubbing)")	-	0	-
Cl-6, Table -2 S. No- (iii), a) (Amendment No-1)(Water vapour permeability)	-	0	-
Cl-6, Table -2 S. No- (iii), b) (Amendment No-1)(Water vapour coefficient)	-	0	-
Cl-6, Table -2 S. No- (iv),(Amendment No-1)(Stitch tear strength)	-	0	-
Cl-6, Table -2 S. No- (v),(Amendment No-1)(Colour fastness to light grey scale rate,)	-	0	-
Cl-6, Table -3 S. No- (i),(Amendment No-1)(Breaking strength, N/mm, Min)	-	0	-
Cl-6, Table -3 S. No- (ii),(Amendment No-1)("Elongation at break a-Tighter direction b-Stretch direction")	-	0	-
Cl-6, Table -3 S. No- (iii),(Amendment No-1)("Tear strength, N, Min a) For fabric b) For all other materials")	-	0	-
Cl-6, Table -3 S. No- (iv),(Amendment No-1)("Flexing resistance a- Dry condition b-Wet condition")	-	0	-
Cl-6, Table -3 S. No- (v), a (Amendment No-1)(Water vapour permeability)	-	0	-
Cl-6, Table -3 S. No- (v), b (Amendment No-1)(Water vapour coefficient)	-	0	-
Cl-6, Table -3 S. No- (vi), (Amendment No-1)(Hydrolysis resistance)	-	0	-
Cl-6, Table -3 S. No- (vii), (Amendment No-1)(Bursting strength)	-	0	-
Cl-6, Table -4 S. No- (i),(Amendment No-1)(Tear strength, N, Min)	-	0	-
Cl-6, Table -4 S. No- (ii),(Amendment No-1)("Abrasion resistance, cycles a- Dry condition b-Wet condition")	-	0	-
Cl-6, Table -4 S. No- (iii),(Amendment No-1)(Colour fastness to rubbing , grey scale rate with 10 rubs on dry or wet, Min)	-	0	-
Cl-6, Table -4 S. No- (iv),(Amendment No-1)(Colour fastness to perspiration)	-	0	-
Cl-6, Table -4 S. No- (v), a (Amendment No-1)(Water vapour permeability)	-	0	-
Cl-6, Table -4 S. No- (v), b (Amendment No-1)(Water vapour coefficient)	-	0	-
Cl-6, Table -5 S. No- (i), (Amendment No-1)(Thickness, mm, Min)	-	0	-
Cl-6, Table -5 S. No-(ii), (Amendment No-1)(Flexing index, Min)	-	0	-
Cl-6, Table -5 S. No-(iii), (Amendment No-1)(Abrasion resistance,)	-	0	-
Cl-6, Table -5 S. No- (iv), a (Amendment No-1)(Water absorption)	-	0	-
Cl-6, Table -5 S. No- (iv), b (Amendment No-1)(Water desorption, percent)	-	0	-
Cl-6, Table -6 S. No- (i), (Amendment No-1)(Thickness, mm, Min)	-	0	-
Cl-6, Table -6 S. No- (ii), (Amendment No-1)("Abrasion resistance, cycles a- Dry condition b-Wet condition")	-	0	-
Cl-6, Table -6 S. No- (iii),a (Amendment No-1)(Water absorption)	-	0	-
Cl-6, Table -6 S. No- (iv), b (Amendment No-1)(Water desorption, percent)	-	0	-
Cl-6, Table -7 S. No- (i), (Amendment No-1)(Flexing resistance (Belt method or Bennewart method))	-	0	-
Cl-6, Table -7 S. No- (ii), (Amendment No-1)(Hydrolysis resistance, cut growth after flexes)	-	0	-
Cl-6, Table -8 S. No- (i), (Amendment No-1)("Compression set, percent, Max a) For EVA b) For all other materials")	-	0	-
Cl-6, Table -8 S. No- (ii), (Amendment No-1)(Split tear strength)	-	0	-
Cl-6, Table -8 S. No- (iii), (Amendment No-1)(Heat shrinkage)	-	0	-
Cl-6, Table -9 S. No- (i), (Amendment No-1)(First dry collapsing load, hardness)	-	0	-
Cl-6, Table -9 S. No- (ii), (Amendment No-1)(Resilience, percent)	-	0	-
Cl-6, Table -9 S. No- (iii), (Amendment No-1)(Moisture resistance)	-	0	-
Cl-6, Table -9 S. No- (iv), a (Amendment No-1)(Initial dry area shape retention)	-	0	-
Cl-6, Table -9 S. No- (iv), b (Amendment No-1)(Area shape retention after 10th collapse)	-	0	-
Cl-6, Table -10 S. No- (i), (Amendment No-1)("Peel strength a) Initial b) After 5 000 wear cycles")	-	0	-
Cl-6, Table -10 S. No- (ii), (Amendment No-1)("Shear strength a) Initial b) After 5 000 wear cycles")	-	0	-
Cl-6, Table -11 S. No- (i), (Amendment No-1)(Limit of useful extension)	-	0	-
Cl-6, Table -12 S. No- (i), (Amendment No-1)(Breaking strength of lace)	-	0	-
Cl-6, Table -12 S. No- (ii), (Amendment No-1)(Lace tag strength)	-	0	-
Cl-6, Table -12 S. No- (iii), (Amendment No-1)(Lace to lace abrasion)	-	0	-
Cl-6, Table -12 S. No- (iv), (Amendment No-1)(Colour fastness to water (for lace) (contact method))	-	0	-
Cl-6, Table -12 S. No- (iv), (Amendment No-1)(Colour fastness to water (for lace) (contact method))	-	0	-
Cl-6, Table -12 S. No (v), (Amendment No-1)(Strength of buckle/ski hook)	-	0	-
Cl-6, Table -12 S. No- (vi), (Amendment No-1)(Corrosion resistance)	-	0	-
Cl No.4.3(Whole Footwear)	-	0	-

16 Feb, 2030

-
Included w.e.f 21.10.2024 Colour fastness to light test - Scope restricted to Exposure Cycle A1

10508

Ace Test Labs & Metrology Pvt. Ltd., Sonipat

9162826

IS 2082 (2018)

Stationary storage type electric water heaters - Specification (Fifth Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	2000	-
7(Marking)	-	2000	-
7(Marking)	-	2000	-
7(Marking)	-	2000	-
7(Marking)	-	2000	-
7(Marking)	-	2000	-
7(Marking)	-	2000	-
7(Marking)	-	2000	-
7(Marking)	-	2000	-
7(Marking)	-	2000	-
7(Marking)	-	2000	-
7(Marking)	-	2000	-
7(Marking)	-	2000	-
7(Marking)	-	2000	-
7(Marking)	-	2000	-
7(Marking)	-	2000	-
7(Marking)	-	2000	-
7(Marking)	-	2000	-
7(Marking)	-	2000	-
7(Marking)	-	2000	-
7(Marking)	-	2000	-
7(Marking)	-	2000	-
7(Marking)	-	2000	-
7(Marking)	-	2000	-
7(Marking)	-	2000	-
7(Marking)	-	2000	-
7(Marking)	-	2000	-
7(Marking)	-	2000	-
6(Classification )	-	2000	-
6(Classification )	-	2000	-
(Cl.8 of IS 302-2-21:2011)(Protection Against Access to Live Parts)	-	2000	-
(Cl.10 of IS 302-2-21: 2011)(Power Input & Current)	-	2000	-
(Cl.11 of 302-2-21:2011)(Heating)	-	2000	-
(Cl.11 of 302-2-21:2011)(Heating)	-	2000	-
(Cl.11 of 302-2-21:2011)(Heating)	-	2000	-
(Cl.13 of IS 302-2-21:2011)(Leakage Current )	-	2000	-
(Cl.13 of IS 302-2-21:2011)(Electrical Strength at Operating Temperature)	-	2000	-
(Cl.14ofIS302-2-21:2011)(Transient Over Voltages)	-	2000	-
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	2000	-
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	2000	-
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	2000	-
(Cl.17 of IS 302-2-21:2011)(Overload protection of transformers & associated circuits)	-	2000	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	2000	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	2000	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	2000	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	2000	-
(Cl.20 of IS 302-2-21:2011)(Stability & Mechanical Hazards)	-	2000	-
(Cl.21ofIS302-2-21:2011)(Mechanical strength)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	2000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	2000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	2000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	2000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	2000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	2000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	2000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	2000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	2000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	2000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	2000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	2000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	2000	-
(Cl.24ofIS302-221:2011)(Component)	-	2000	-
(Cl.24ofIS302-221:2011)(Component)	-	2000	-
(Cl.24ofIS302-221:2011)(Component)	-	2000	-
(Cl.24ofIS302-221:2011)(Component)	-	2000	-
(Cl.24ofIS302-221:2011)(Component)	-	2000	-
(Cl.24ofIS302-221:2011)(Component)	-	2000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	2000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	2000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	2000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	2000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	2000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	2000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	2000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	2000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	2000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	2000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	2000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	2000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	2000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	2000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	2000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	2000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	2000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	2000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	2000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	2000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	2000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	2000	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	2000	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	2000	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	2000	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	2000	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	2000	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	2000	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	2000	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	2000	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	2000	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	2000	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	2000	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	2000	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	2000	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	2000	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	2000	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	2000	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	2000	-
(Cl.28 of IS 302-2-21:2011)(Screws & Connections)	-	2000	-
(Cl.29ofIS302-2-21:2011)(Clearances, Creepage Distances and Solid Insulation)	-	2000	-
(Cl.30 of IS 302-2-21:2011)(Resistance to Heat & Fire)	-	2000	-
(Cl.30 of IS 302-2-21:2011)(Resistance to Heat & Fire)	-	2000	-
(Cl.31 of IS 302-2-21:2011)(Resistance to Rusting)	-	2000	-
(Cl.15 of IS 2082:2018)(Verification of the Rated Capacity)	-	2000	-
(Cl.16 of IS 2082:2018)(Standing Loss per 24 Hours)	-	2000	-
(Cl.17 of IS 2082:2018)(Hot Water Output)	-	2000	-
(Cl.18 of IS 2082:2018)( Reheating Time)	-	2000	-
(Cl.19 of IS 2082:2018)(Mixing Factor)	-	2000	-
(Cl.20 of IS 2082:2018)(Deviation of Dial Calibration)	-	2000	-
(Cl.21 of IS 2082:2018)(Cyclic Temperature Variation)	-	2000	-
(Cl.22 of IS 2082:2018)(Finish)	-	2000	-
Cl.22 of IS 2082:2018(Finish)	-	2000	-
Cl.21 of IS 2082:2018(Cyclic Temperature Variation)	-	2000	-
Cl.20 of IS 2082:2018(Deviation of Dial Calibration)	-	2000	-
Cl.19 of IS 2082:2018(Mixing Factor)	-	2000	-
Cl.18 of IS 2082:2018( Reheating Time)	-	2000	-
Cl.17 of IS 2082:2018(Hot Water Output)	-	2000	-
Cl.16 of IS 2082:2018(Standing Loss per 24 Hours)	-	2000	-
Cl.15 of IS 2082:2018(Verification of the Rated Capacity)	-	2000	-
Cl.31 of IS 302-2-21:2018(Resistance to Rusting)	-	2000	-
Cl.30.2 of IS 302-1:2008(Resistance to Heat & Fire : Glow wire test )	-	2000	-
Cl.30.1 of IS 302-1:2008(Resistance to Heat & Fire : Ball pressure test )	-	2000	-
Cl.29.2 of IS 302-1:2008(Clearances, Creepage Distances and Solid Insulation : Creepage distance )	-	2000	-
Cl.29.1 of IS 302-1:2008(Clearances, Creepage Distances and Solid Insulation : Clearance distance )	-	2000	-
Cl.28 of IS 302-2-21:2018(Screws & Connections)	-	2000	-
Cl.27.5 of IS 302-1:2008(Provision for Earthing : ECR )	-	2000	-
Cl.27 of IS 302-2-21:2018(Provision for Earthing)	-	2000	-
Cl.26 of IS 302-2-21: 2018(Terminals for External Conductors)	-	2000	-
Cl.25.18 of IS 302-1:2008(Supply Connection & External Flexible Cords)	-	2000	-
Cl.25.15 of IS 302-1:2008(Supply Connection & External Flexible Cords : Cord grip test - displacement )	-	2000	-
Cl.25.15 of IS 302-1:2008(Supply Connection & External Flexible Cords : Cord grip test )	-	2000	-
Cl.25.12 of IS 302-1:2008(Supply Connection & External Flexible Cords : Moulding of supply cord )	-	2000	-
Cl.25.10 of IS 302-1:2008(Supply Connection & External Flexible Cords : Colour of Earthing conductor )	-	2000	-
Cl.25.8 of IS 302-2-21:2018(Supply Connection & External Flexible Cords : Resistance of supply cord )	-	2000	-
Cl.25.5 of IS 302-1:2008(Supply Connection & External Flexible Cords : Type of attachment )	-	2000	-
Cl.25 of IS 302-2-21:2018(Supply Connection & External Flexible Cords : connection to the supply mains)	-	2000	-
Cl.24.102 of IS 302-221:2018(Component : Operation of thermal cut-out )	-	2000	-
Cl.24.101 of IS302-221:2018(Component : Location of non self reseting thermal cut out )	-	2000	-
Cl.24of IS 302-221:2018(Component : Relevent Indian standards )	-	2000	-
Cl. 23 of IS 302-1:2008(Internal Wiring : color identification for earthing conductor )	-	2000	-
Cl. 23 of IS 302-1:2008(Internal Wiring )	-	2000	-
Cl.22.111 of IS 302-2-21:2018(Construction : Resistance to vacuum )	-	2000	-
Cl.22.110 of IS 302-2-21:2018(Construction : meterial of connections )	-	2000	-
Cl.22.110 of IS 302-2-21:2018(Construction : Material of Inner conatiner )	-	2000	-
Cl.22.109 of IS 302-2-21:2018(Construction : Drain for appliance having a capacity of more than 15 liter)	-	2000	-
Cl.22.108 of IS 302-2-21:2018(Construction : fixing to wall )	-	2000	-
Cl.22.107 of IS 302-2-21:2018(Construction : Position of Heating elements and thermal control sensor)	-	2000	-
Cl.22.106 of IS 302-2-21:2018(Construction : Operation of thermal cut- out )	-	2000	-
Cl.22.104 of IS 302-2-21:2018(Construction : Outlet of open outlet heater )	-	2000	-
Cl.22.103 of IS 302-2-21:2018(Construction : Operation of Pressure relieve devices )	-	2000	-
Cl.22.102 of IS 302-2-21:2018(Construction : repeated drawing of water temp )	-	2000	-
Cl.22.101 of IS 302-2-21:2018(Construction : rated pressure of closed water heater )	-	2000	-
Cl.22.47 of IS 302-2-21:2018 (Construction : Water pressure test )	-	2000	-
Cl.22.44 of IS 302-1:2008(Construction : Shape and decoration of enclosure)	-	2000	-
Cl.22.34, Cl 22.35 of IS 302-1:2008(Construction : Shaft of operating Knobs )	-	2000	-
Cl.22.33 of IS 302-1:2008(Construction : Direct contact of liquids )	-	2000	-
Cl 22.26 ,Cl.22.28, Cl 22.29, Cl 22.30 , Cl 22.31, Cl 22.32 of IS 302-1:2008(Construction : Supplymentry/ double / reinforced insulation for Class II/ Class III appliance )	-	2000	-
Cl.22.18 Of IS 302-1:2008(Construction : Resistance to corrosion )	-	2000	-
Cl.22.17 of IS 302-1:2008(Construction : Spacers )	-	2000	-
Cl.22.14 of IS 302-1:2008(Construction : ragged or sharp edges)	-	2000	-
Cl.22.12 of IS 302-1:2008(Construction : Fixing of Handle, knob, grips, levers and similar parts)	-	2000	-
Cl.22.11 of IS 302-1:2008(Construction : Fixing of non detachable part )	-	2000	-
Cl.22.7 of IS 302-1:2008(Construction: adequate safeguards against the risk of excessive pressure)	-	2000	-
Cl.22.6 of IS 302-2-21:2018(Construction : Size of drain hole )	-	2000	-
Cl.22.6 of IS 302-1:2008(Construction : Effect of water on 3 insulation )	-	2000	-
Cl.22.2 of IS 302-1:2008(Construction : Provision to ensure all pole disconnection )	-	2000	-
Cl.22.1 of IS 302-1:2008(Construction : IP test )	-	2000	-
Cl.21.2 of IS 302-1:2008(Mechanical strength : prevent penetration by sharp implements. )	-	2000	-
Cl.21.1 of IS 302-1:2008(Mechanical strength : Rough handling in normal use)	-	2000	-
Cl.20 of IS 302-1:2008(Stability & Mechanical Hazards)	-	2000	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : leakage from container during test)	-	2000	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : High Voltage )	-	2000	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : Insulation of the supply cable or cord)	-	2000	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : Wall ceiling temp. of test corner )	-	2000	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : emission of flame or molten metal or poisonous or ignitable gas )	-	2000	-
Cl.16 of IS 302-2-21-2018(Leakage current and Electric strength (After humidity): Electric Strentgh )	-	2000	-
Cl.16 of IS 302-2-21-2018(Leakage current and Electric strength (After humidity): Leakage current )	-	2000	-
Cl.15 of IS 302-2-21-2018(Moisture Resistance)	-	2000	-
Cl.14 of IS 302-2-21:2018(Transient Over Voltages)	-	2000	-
Cl.13 of IS 302-2-21:2018(3 Strength at Operating Temperature)	-	2000	-
Cl.13 of IS 302-2-21:2018(Leakage Current )	-	2000	-
Cl.11 of 302-2-21:2018(Heating : Room Temp.)	-	2000	-
Cl.11 of 302-2-21:2018(Heating : Temp of Rubber or PVC insulation of internal and external wiring)	-	2000	-
Cl.11 of 302-2-21:2018(Heating : Temp of Walls, ceilings and floor of the test corner )	-	2000	-
Cl.10 of IS 302-2-21: 2018(Power Input & Current)	-	2000	-
Cl.8 of IS 302-2-21:2018(Protection Against Access to Live Parts)	-	2000	-
7.101(Marking : Indifiction of water inlet and water outlet )	-	2000	-
7.14(Marking : Legibility and durability)	-	2000	-
7.13(Marking : Official language of Instruction )	-	2000	-
7.11(Marking : Indication of controls )	-	2000	-
7.8(Marking : Terminals )	-	2000	-
7.6(Marking : Symbol used )	-	2000	-
7.1(Marking : Warning for Open- outlet )	-	2000	-
7.1(Marking : Statement for pressure reducing valve ( For rated pressure less than 0.6 MPa))	-	2000	-
7.1(Marking : Statement for a pressure-relief device)	-	2000	-
7.1(Marking : Rated capacity)	-	2000	-
7.1(Marking : Rated pressure)	-	2000	-
7.1(Marking : Country of manufacture)	-	2000	-
7.1(Marking: IP Number)	-	2000	-
7.1(Marking: Symbol for Class II)	-	2000	-
7.1(Marking: Model or type reference)	-	2000	-
7.1(Marking: Name, trademark or identification mark of manufacturer )	-	2000	-
7.1(Marking : Rated power input)	-	2000	-
7.1(Marking : Symbol for nature of supply )	-	2000	-
7.1(Marking : Rated Voltage )	-	2000	-
Cl.32 of IS 302-1:2008()	-	2000	-
4(GENERAL REQUIREMENT)	-	2000	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	2000	-
12(THERMOSTAT SETTING)	-	2000	-
Cl-10(Mounting of the water heater)	-	2000	-
Cl-11(Measurements of stored water temperature)	-	2000	-
Cl-12(Thermostat setting)	-	2000	-
Cl-13(Measurement of energy consumption)	-	2000	-
Cl-14(Verification of the rated capacity)	-	2000	-

14 Nov, 2027

-
Included w.e.f 30.01.2025

10509

INDIAN TESTING LABORATORY PRIVATE LIMITED, GREATER NOIDA

8171306

IS 848 (2006)

Synthetic resin adhesives for plywood (Phenolic And Aminoplastic) - Specification (Second Revision)

6967.50 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4 Table (i)(BWP (BOiling WaterProof))	-	1500	-
4 Table (i)(BWR (Boiling Water Resistant))	-	1500	-
4 Table (i)(MR (Moisture Ressistant))	-	1500	-
5,7.4(Keeping Quality (Resistance to heat Polymerization))	-	1500	-
7.4(Acidity and Alkalinity ( pH))	-	1500	-
4 Table (i)(BWP (BOiling WaterProof))	-	0	-
4 Table (i)(BWR (Boiling Water Resistant))	-	0	-
4 Table (i)(MR (Moisture Ressistant))	-	0	-
5,7.4(Keeping Quality (Resistance to heat Polymerization))	-	0	-
7.4(Acidity and Alkalinity ( pH))	-	0	-

15 Aug, 2028

-
Included w.e.f. 25.07.2024

10510

THE NATIONAL SMALL INDUSTRIES CORPORATION LIMITED, TECHNICAL SERVICES CENTRE - NSIC, Rajpura

9111924

IS 2082 (2018)

Stationary storage type electric water heaters - Specification (Fifth Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification )	-	600	20% discount on BIS Samples
7(Marking)	-	500	20% discount on BIS Samples
Cl.8 of IS 302-2-21:2018(Protection Against Access to Live Parts)	-	800	20% discount on BIS Samples
Cl.10 of IS 302-2-21: 2018(Power Input & Current)	-	600	20% discount on BIS Samples
Cl.11 of 302-2-21:2018(Heating : Room Temp.)	-	1100	20% discount on BIS Samples
Cl.13 of IS 302-2-21:2018(Leakage Current )	-	350	20% discount on BIS Samples
Cl.14 of IS 302-2-21:2018(Transient Over Voltages)	-	500	20% discount on BIS Samples
Cl.15 of IS 302-2-21-2018(Moisture Resistance)	-	400	20% discount on BIS Samples
Cl.16 of IS 302-2-21-2018(Leakage current and Electric strength (After humidity): Leakage current )	-	350	220% discount on BIS Samples
(Cl.17 of IS 302-2-21:2011)(Overload protection of transformers & associated circuits)	-	100	20% discount on BIS Samples
Cl.19 of IS 302-2-21:2018(Abnormal Operation : High Voltage )	-	600	20% discount on BIS Samples
(Cl.20 of IS 302-2-21:2011)(Stability & Mechanical Hazards)	-	100	20% discount on BIS Samples
(Cl.21ofIS302-2-21:2011)(Mechanical strength)	-	600	20% discount on BIS Samples
Cl.22.47 of IS 302-2-21:2018 (Construction : Water pressure test )	-	50	20% discount on BIS Samples
Cl.22.101 of IS 302-2-21:2018(Construction : rated pressure of closed water heater )	-	45	20% discount on BIS Samples
Cl.22.102 of IS 302-2-21:2018(Construction : repeated drawing of water temp )	-	45	20% discount on BIS Samples
Cl.22.103 of IS 302-2-21:2018(Construction : Operation of Pressure relieve devices )	-	45	20% discount on BIS Samples
Cl.22.104 of IS 302-2-21:2018(Construction : Outlet of open outlet heater )	-	45	20% discount on BIS Samples
Cl.22.106 of IS 302-2-21:2018(Construction : Operation of thermal cut- out )	-	45	20% discount on BIS Samples
Cl.22.107 of IS 302-2-21:2018(Construction : Position of Heating elements and thermal control sensor)	-	45	20% discount on BIS Samples
Cl.22.108 of IS 302-2-21:2018(Construction : fixing to wall )	-	45	20% discount on BIS Samples
Cl.22.109 of IS 302-2-21:2018(Construction : Drain for appliance having a capacity of more than 15 liter)	-	45	20% discount on BIS Samples
Cl.22.110 of IS 302-2-21:2018(Construction : Material of Inner conatiner )	-	45	20% discount on BIS Samples
Cl.22.111 of IS 302-2-21:2018(Construction : Resistance to vacuum )	-	45	20% discount on BIS Samples
Cl. 23 of IS 302-1:2008(Internal Wiring )	-	100	20% discount on BIS Samples
Cl.24of IS 302-221:2018(Component : Relevent Indian standards )	-	100	20% discount on BIS Samples
Cl.24.101 of IS302-221:2018(Component : Location of non self reseting thermal cut out )	-	150	20% discount on BIS Samples
Cl.24.102 of IS 302-221:2018(Component : Operation of thermal cut-out )	-	150	20% discount on BIS Samples
Cl.25 of IS 302-2-21:2018(Supply Connection & External Flexible Cords : connection to the supply mains)	-	800	20% discount on BIS Samples
Cl.26 of IS 302-2-21: 2018(Terminals for External Conductors)	-	100	20% discount on BIS Samples
Cl.27 of IS 302-2-21:2018(Provision for Earthing)	-	800	20% discount on BIS Samples
Cl.28 of IS 302-2-21:2018(Screws & Connections)	-	100	20% discount on BIS Samples
Cl.29.1 of IS 302-1:2008(Clearances, Creepage Distances and Solid Insulation : Clearance distance )	-	400	20% discount on BIS Samples
Cl.29.2 of IS 302-1:2008(Clearances, Creepage Distances and Solid Insulation : Creepage distance )	-	400	20% discount on BIS Samples
Cl.30.1 of IS 302-1:2008(Resistance to Heat & Fire : Ball pressure test )	-	50	20% discount on BIS Samples
Cl.30.2 of IS 302-1:2008(Resistance to Heat & Fire : Glow wire test )	-	50	20% discount on BIS Samples
Cl.31 of IS 302-2-21:2018(Resistance to Rusting)	-	200	20% discount on BIS Samples
Cl.32 of IS 302-1:2008()	-	0	20% discount on BIS Samples
Cl.15 of IS 2082:2018(Verification of the Rated Capacity)	-	400	20% discount on BIS Samples
Cl.16 of IS 2082:2018(Standing Loss per 24 Hours)	-	2000	20% discount on BIS Samples
(Cl.17 of IS 2082:2018)(Hot Water Output)	-	400	20% discount on BIS Samples
(Cl.18 of IS 2082:2018)( Reheating Time)	-	400	20% discount on BIS Samples
Cl.19 of IS 2082:2018(Mixing Factor)	-	400	20% discount on BIS Samples
(Cl.20 of IS 2082:2018)(Deviation of Dial Calibration)	-	100	20% discount on BIS Samples
Cl.21 of IS 2082:2018(Cyclic Temperature Variation)	-	100	20% discount on BIS Samples
Cl.22 of IS 2082:2018(Finish)	-	100	20% discount on BIS Samples
Cl-10(Mounting of the water heater)	-	150	20% discount on BIS Samples
Cl-11(Measurements of stored water temperature)	-	150	20% discount on BIS Samples
Cl-12(Thermostat setting)	-	150	20% discount on BIS Samples
Cl-13(Measurement of energy consumption)	-	150	20% discount on BIS Samples

31 Dec, 2026

-
Excluding Cl.19.11.4.1 to Cl.19.11.4.7 (EMI/EMC Test) Cl.32 of IS 302-2-15 (Radiation, Toxicity and Similar Hazards)

10511

THE NATIONAL SMALL INDUSTRIES CORPORATION LIMITED, TECHNICAL SERVICES CENTRE - NSIC, Rajpura

9111924

IS 302 : Part 2 : Sec 21 (2018)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 21 stationary storage type electric water heaters (Second Revision)

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	600	20% discount on BIS samples
7.0(Marking and Instructions)	-	500	20% discount on BIS samples
8.0(Protection against access to live parts)	-	800	20% discount on BIS samples
10.0(Input and Current)	-	1100	20% discount on BIS samples
11.0(Heating)	-	1100	20% discount on BIS samples
13.0(Leakage Current and electric strength at operating temperature)	-	350	20% discount on BIS samples
14.0(Transient Overvoltage)	-	500	20% discount on BIS samples
15.0(Moisture resistance)	-	400	20% discount on BIS samples
16.0(Leakage current and Electric strength (After Humidity (Environmental) Treatment))	-	350	20% discount on BIS samples
17.0(Overload Protection of transformer and associated circuit)	-	100	20% discount on BIS samples
19.0(Abnormal Operation)	-	600	20% discount on BIS samples
20.0(Stability and mechanical hazards)	-	100	20% discount on BIS samples
22.0(Construction)	-	500	20% discount on BIS samples
23.0(Internal Wiring)	-	100	20% discount on BIS samples
24(Components)	-	400	20% discount on BIS samples
25.0(Supply Connection and External Flexible Cords)	-	800	20% discount on BIS samples
26.0(Terminals for external conductors)	-	100	20% discount on BIS samples
27.0(Provision For Earthing)	-	800	20% discount on BIS samples
28.0(Screws and Connections)	-	100	20% discount on BIS samples
29.0(Creepage Distances and Clearances)	-	800	20% discount on BIS samples
30.0(Resistance To Heat and Fire)	-	100	20% discount on BIS samples
31.0(Resistance To Rusting)	-	200	20% discount on BIS samples
32(RADIATION TOXICITY AND SIMILAR HAZARDS)	-	0	20% discount on BIS samples
21.0(Mechanical Strength)	-	600	20% discount on BIS samples

31 Dec, 2026

-
Excluding Cl.19.11.4.1 to Cl.19.11.4.7 (EMI/EMC Test) Cl.32 (Radiation, Toxicity and Similar Hazards)

10512

THE NATIONAL SMALL INDUSTRIES CORPORATION LIMITED, TECHNICAL SERVICES CENTRE - NSIC, Rajpura

9111924

IS 4159 (2021)

Mineral Filled Sheathed Heating Elements

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
"Cl. 6 IS 4159:2021"(Classification)	-	100	20% discount to BIS on testing charges
"Cl. 8 IS 4159:2021"(Protection against access to live parts)	-	800	20% discount to BIS on testing charges
"Cl. 10 IS 4159:2021"(Power Input and Current)	-	650	20% discount to BIS on testing charges
"Cl. 11 IS 4159:2021"(Heating)	-	650	20% discount to BIS on testing charges
"Cl. 13 IS 4159:2021"(Leakage Current & Electrical Strength at Operating Temperature)	-	400	20% discount to BIS on testing charges
"Cl. 14 IS 4159:2021"(Transient Over Voltage)	-	200	20% discount to BIS on testing charges
"Cl. 15 IS 4159:2021"(Moisture Resistance)	-	400	20% discount to BIS on testing charges
"Cl. 16 IS 4159:2021"(Leakage Current and Electric strength)	-	400	20% discount to BIS on testing charges
"Cl. 18 IS 4159:2021"(Endurance)	-	3900	20% discount to BIS on testing charges
"Cl. 19 IS 4159:2021"(Abnormal Operation)	-	400	20% discount to BIS on testing charges
"Cl. 20 IS 4159:2021"(Stability and mechanical Hazards)	-	100	20% discount to BIS on testing charges
"Cl. 21 IS 4159:2021"(Mechanical Strength)	-	200	20% discount to BIS on testing charges
"Cl. 22 IS 4159:2021"(Construction)	-	100	20% discount to BIS on testing charges
"Cl. 23 IS 4159:2021"(Internal Wiring)	-	400	20% discount to BIS on testing charges
"Cl. 24 IS 4159:2021"(Components)	-	200	20% discount to BIS on testing charges
"Cl. 25 IS 4159:2021"(Supply Connections and External Flexible Cables and Cords)	-	800	20% discount to BIS on testing charges
"Cl. 26 IS 4159:2021"(Terminal For External Conductors)	-	100	20% discount to BIS on testing charges
"Cl. 27 IS 4159:2021"(Provision For Earthing)	-	1000	20% discount to BIS on testing charges
"Cl. 28 IS 4159:2021"(Screws and Connections)	-	200	20% discount to BIS on testing charges
"Cl. 29 IS 4159:2021"(Creepage Distances, Clearances And Distances Through Insulation)	-	700	20% discount to BIS on testing charges
"Cl. 30 IS 4159:2021"(Resistance To Heat, Fire And Tracking)	-	400	20% discount to BIS on testing charges
"Cl. 31 IS 4159:2021"(Resistance To Rusting)	-	100	20% discount to BIS on testing charges
"Cl. 102 IS 4159:2021"(Leakage and hydrostatic strength (for oil heating elements))	-	100	20% discount to BIS on testing charges

31 Dec, 2026

-
Excluding Cl.19.11.4.1 to Cl.19.11.4.7 (EMI/EMC Test) Cl.32 of IS 302-2-15 (Radiation, Toxicity and Similar Hazards)

10513

THE NATIONAL SMALL INDUSTRIES CORPORATION LIMITED, TECHNICAL SERVICES CENTRE - NSIC, Rajpura

9111924

IS 367 (1993)

Electric kettles and jugs for household and similar use - Specification (Fourth Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11(Overall Dimensions)	-	100	20% discount to BIS on testing charges
12(Mass)	-	100	20% discount to BIS on testing charges
13(Water Capacity)	-	100	20% discount to BIS on testing charges
14(Time to boil one litre of water)	-	200	20% discount to BIS on testing charges
15(Time to boil water capacity)	-	300	20% discount to BIS on testing charges
16(Minimum quantity of water that can be boiled)	-	300	20% discount to BIS on testing charges
17(Temperature of supporting surface)	-	300	20% discount to BIS on testing charges
18(Thermal Efficiency)	-	200	20% discount to BIS on testing charges
19(Endurance)	-	1000	20% discount to BIS on testing charges
20(Finish)	-	100	20% discount to BIS on testing charges
9(Safety Requirements)	-	12000	20% discount to BIS on testing charges
6(Rating)	-	100	20% discount to BIS on testing charges
7(Classification)	-	100	20% discount to BIS on testing charges
8(Marking and Instruction)	-	100	20% discount to BIS on testing charges
Cl-9 (Cl-8 of IS 302-2-15)(PROTECTION AGAINST ACCESS TO LIVE PARTS)	-	1000	20% discount to BIS on testing charges
Cl-9 (Cl-10 of IS 302-2-15)(POWER INPUT AND CURRENT)	-	600	20% discount to BIS on testing charges
Cl-9 (Cl-11 of IS 302-2-15)(HEATING)	-	600	20% discount to BIS on testing charges
Cl-9 (Cl-13 of IS 302-2-15)(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	600	20% discount to BIS on testing charges
Cl-9 (Cl-14 of IS 302-2-15)(TRANSIENT OVER VOLTAGES)	-	400	20% discount to BIS on testing charges
Cl-9 (Cl-15 of IS 302-2-15)(MOISTURE RESISTANCE)	-	400	20% discount to BIS on testing charges
Cl-9 (Cl-16 of IS 302-2-15)(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	600	20% discount to BIS on testing charges
Cl-9 (Cl-17 of IS 302-2-15)(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	100	20% discount to BIS on testing charges
Cl-9 (Cl-19 of IS 302-2-15)(ABNORMAL OPERATION)	-	600	20% discount to BIS on testing charges
Cl-9 (Cl-20 of IS 302-2-15)(STABILITY AND MECHANICAL HAZARDS)	-	900	20% discount to BIS on testing charges
Cl-9 (Cl-21 of IS 302-2-15)(MECHANICAL STRENGTH)	-	900	20% discount to BIS on testing charges
Cl-9 (Cl-22 of IS 302-2-15)(CONSTRUCTION)	-	1000	20% discount to BIS on testing charges
Cl-9 (Cl-23 of IS 302-2-15)(INTERNAL WIRING)	-	100	20% discount to BIS on testing charges
Cl-9 (Cl-24 of IS 302-2-15)(COMPONENTS)	-	1000	20% discount to BIS on testing charges
Cl-9 (Cl-25 of IS 302-2-15)(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	900	20% discount to BIS on testing charges
Cl-9 (Cl-26 of IS 302-2-15)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	100	20% discount to BIS on testing charges
Cl-9 (Cl-27 of IS 302-2-15)(PROVISION FOR EARTHING)	-	1000	20% discount to BIS on testing charges
Cl-9 (Cl-28 of IS 302-2-15)(SCREWS AND CONNECTIONS)	-	200	20% discount to BIS on testing charges
Cl-9 (Cl-29 of IS 302-2-15)(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	700	20% discount to BIS on testing charges
Cl-9 (Cl-30 of IS 302-2-15)(RESISTANCE TO HEAT AND FIRE)	-	150	20% discount to BIS on testing charges
Cl-9 (Cl-31 of IS 302-2-15)(RESISTANCE TO RUSTING)	-	150	20% discount to BIS on testing charges
Cl-9 (Cl-32 of IS 302-2-15)(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	0	20% discount to BIS on testing charges

31 Dec, 2026

-
Restricted upto 6 kW Excluding Cl.19.11.4.1 to Cl.19.11.4.7 (EMI/EMC Test) Cl.32 of IS 302-2-15 (Radiation, Toxicity and Similar Hazards)

10514

THE NATIONAL SMALL INDUSTRIES CORPORATION LIMITED, TECHNICAL SERVICES CENTRE - NSIC, Rajpura

9111924

IS 302 : Part 2 : Sec 35 (2017)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 35 electric instantaneous water heaters (Second Revision)

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6 IS 302-2-35(Classification)	-	500	20% discount to BIS on testing charges
Cl. 7 IS 302-2-35(Marking and Instruction)	-	300	20% discount to BIS on testing charges
Cl. 8 IS 302-2-35(Protection against access to live parts)	-	200	20% discount to BIS on testing charges
Cl. 10 IS 302-2-35(Power Input and Current )	-	1000	20% discount to BIS on testing charges
Cl. 11 IS 302-2-35(Heating)	-	800	20% discount to BIS on testing charges
Cl. 13 IS 302-2-35(Leakage Current & Electric Strength at Operating Temperature)	-	1000	20% discount to BIS on testing charges
Cl. 14 IS 302-2-35(Radio and television interference suppression / Transient over voltages)	-	800	20% discount to BIS on testing charges
Cl. 15 IS 302-2-35(Moisture Resistance Test )	-	800	20% discount to BIS on testing charges
Cl. 16 IS 302-2-35(Leakage Current & Electric Strength at Operating Temperature (After Humidity Treatment))	-	1000	20% discount to BIS on testing charges
Cl. 19 IS 302-2-35(Abnormal Operation )	-	800	20% discount to BIS on testing charges
Cl. 20 IS 302-2-35(Stability & Mechanical Hazards)	-	200	20% discount to BIS on testing charges
Cl. 21 IS 302-2-35(Mechanical strength)	-	200	20% discount to BIS on testing charges
Cl. 22 IS 302-2-35(Construction )	-	300	20% discount to BIS on testing charges
Cl. 23 IS 302-2-35(Internal Wiring)	-	200	20% discount to BIS on testing charges
Cl. 24 IS 302-2-35(Components)	-	600	20% discount to BIS on testing charges
Cl. 25 IS 302-2-35(Supply Connection & External Flexible Cords)	-	1000	20% discount to BIS on testing charges
Cl. 26 IS 302-2-35(Terminals for External conductors )	-	100	20% discount to BIS on testing charges
Cl. 27 IS 302-2-35(Provision for Earthing )	-	400	20% discount to BIS on testing charges
Cl. 28 IS 302-2-35(Screws & Connections)	-	400	20% discount to BIS on testing charges
Cl. 29 IS 302-2-35(Clearances, Creepage Distances & Solid insulation )	-	800	20% discount to BIS on testing charges
Cl. 30 IS 302-2-35(Resistance to Heat Fire & Tracking )	-	400	20% discount to BIS on testing charges
Cl. 31 IS 302-2-35(Resistance to Rusting)	-	100	20% discount to BIS on testing charges
Cl. 32 IS 302-2-35(Radiation, Toxicity and similar hazards)	-	0	.
Cl. 17 IS 302-2-35(Overload Protection of Transformers and Associated Circuit)	-	100	20% discount to BIS on testing charges

31 Dec, 2026

-
Excluding Cl.19.11.4.1 to Cl.19.11.4.7 (EMI/EMC Test) Cl.32 (Radiation, Toxicity and Similar Hazards)

10515

THE NATIONAL SMALL INDUSTRIES CORPORATION LIMITED, TECHNICAL SERVICES CENTRE - NSIC, Rajpura

9111924

IS 368 (2014)

Electric immersion water heaters - Specification (Fifth Revision)

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6 of IS 302-‐2-‐201:2008(Classification)	-	100	20% discount to BIS on testing charges
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	200	20% discount to BIS on testing charges
Cl.8 of IS 302‐2-201: 2008(Protection Against Access to Live Parts)	-	500	20% discount to BIS on testing charges
Cl.10 of IS 302‐2‐201:2008(Power Input and Current )	-	1000	20% discount to BIS on testing charges
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	20% discount to BIS on testing charges
Cl. 12 of IS 368:2014(Operation under overload conditions of appliances with heating elements)	-	600	20% discount to BIS on testing charges
Cl.13 of IS 302-2-201: 2008(Leakage Current & Electric Strength at Operating Temperature)	-	400	20% discount to BIS on testing charges
Cl.14 of IS 302‐2-201:2008(Transient Over Voltages )	-	400	20% discount to BIS on testing charges
Cl.15 of IS 302-2-201:2008(Moisture Resistance )	-	1000	20% discount to BIS on testing charges
Cl.16 of IS 302-2-201:2008(Leakage Current & Electric Strength)	-	450	20% discount to BIS on testing charges
Cl.18 of IS 368:2014(Endurance)	-	3400	20% discount to BIS on testing charges
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	350	20% discount to BIS on testing charges
Cl.20 of IS 302-2-201: 2008(Stability & Mechanical Hazards)	-	600	20% discount to BIS on testing charges
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	800	20% discount to BIS on testing charges
Cl.22 of IS 302-2-201: 2008(Construction)	-	100	20% discount to BIS on testing charges
Cl.23 of 302-2-201:2008(Internal Wiring )	-	100	20% discount to BIS on testing charges
Cl.24 of IS 302-2-201: 2008(Component)	-	600	20% discount to BIS on testing charges
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	600	20% discount to BIS on testing charges
Cl.26 of IS 302-2-201: 2008(Terminals for External Conductors)	-	100	20% discount to BIS on testing charges
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	600	20% discount to BIS on testing charges
Cl.28 of IS 302-2-201: 2008(Screws & Connections )	-	100	20% discount to BIS on testing charges
Cl.29 of IS 302-2‐201:2008(Clearances, Creepage Distances and Solid Insulation )	-	700	20% discount to BIS on testing charges
Cl.30 of IS 302-2‐201:2008(Resistance to Heat and Fire )	-	100	20% discount to BIS on testing charges
Cl.31 of IS 302-2-201:2008(Resistance of Rusting )	-	100	20% discount to BIS on testing charges
Cl.32 of IS 302-2-201:2008(Radiation, Toxicity and Similar Hazards)	-	0	20% discount to BIS on testing charges
Cl.17 of IS 302‐2-201: 2008(Overload Protection of Transformers & Associated Circuits)	-	100	20% discount to BIS on testing charges

31 Dec, 2026

-
Restricted upto 6 kW Excluding Cl.19.11.4.1 to Cl.19.11.4.7 (EMI/EMC Test) Cl.32 of IS 302-2-15 (Radiation, Toxicity and Similar Hazards)

10516

THE NATIONAL SMALL INDUSTRIES CORPORATION LIMITED, TECHNICAL SERVICES CENTRE - NSIC, Rajpura

9111924

IS 302 : Part 2 : Sec 9 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 9 toasters, grills, roasters and similar appliances (First Revision)

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6 IS 302-2-9(Classification- IS 302-1)	-	400	20% discount to BIS on testing charges
7.1 to 7.13, 7.15, 7.16(Marking)	-	200	20% discount to BIS on testing charges
7.14(Legibility & Durability of Markings test)	-	200	20% discount to BIS on testing charges
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	200	20% discount to BIS on testing charges
8.1.2(Protection against access to live parts)	-	200	20% discount to BIS on testing charges
8.1.3(Protection against access to live parts)	-	200	20% discount to BIS on testing charges
8.1.4(Protection against access to live parts)	-	200	20% discount to BIS on testing charges
8.1.5(Protection against access to live parts)	-	200	20% discount to BIS on testing charges
Cl. 10 IS 302-2-9(Power Input and Current )	-	1000	20% discount to BIS on testing charges
Cl. 11 IS 302-2-9(Heating)	-	1200	20% discount to BIS on testing charges
Cl. 13.3 IS 302-2-9(Leakage Current & Electric Strength at Operating Temperature)	-	600	20% discount to BIS on testing charges
Cl. 14 IS 302-2-9(Transient overvoltage)	-	400	20% discount to BIS on testing charges
Cl. 15 IS 302-2-9(Moisture Resistance)	-	600	20% discount to BIS on testing charges
Cl. 16 IS 302-2-9(Leakage Current and Electric strength )	-	600	20% discount to BIS on testing charges
Cl. 19 IS 302-2-9(Abnormal Operation )	-	400	20% discount to BIS on testing charges
Cl. 20 IS 302-2-9(Stability and mechanical Hazards)	-	1000	20% discount to BIS on testing charges
Cl. 21 IS 302-2-9(Mechanical Strength)	-	1000	20% discount to BIS on testing charges
Cl. 22 IS 302-2-9(Construction )	-	100	20% discount to BIS on testing charges
Cl. 23 IS 302-2-9(Internal Wiring)	-	200	20% discount to BIS on testing charges
Cl. 24 IS 302-2-9(Components)	-	1000	20% discount to BIS on testing charges
Cl. 25 IS 302-2-9(Supply Connections and External Flexible Cables and Cords )	-	1000	20% discount to BIS on testing charges
Cl. 26 IS 302-2-9(Terminal For External Conductors )	-	200	20% discount to BIS on testing charges
Cl. 27 IS 302-2-9(Provision For Earthing )	-	1000	20% discount to BIS on testing charges
Cl. 28 IS 302-2-9(Screws and Connections)	-	200	20% discount to BIS on testing charges
Cl. 29 IS 302-2-9(Creepage Distances, Clearances And Distances Through Insulation)	-	1000	20% discount to BIS on testing charges
Cl. 30 IS 302-2-9(Resistance To Heat, Fire And Tracking)	-	400	20% discount to BIS on testing charges
Cl. 31 IS 302-2-9(Resistance To Rusting )	-	200	20% discount to BIS on testing charges
Cl. 32 IS 302-2-9(Radiation, Toxicity and similar hazards)	-	0	20% discount to BIS on testing charges
Cl. 17 IS 302-2-9(Overload protection of transformers and associated circuits.)	-	100	20% discount to BIS on testing charges

31 Dec, 2026

-
Restricted upto 6 kW Excluding Cl.19.11.4.1 to Cl.19.11.4.7 (EMI/EMC Test) Cl.32 (Radiation, Toxicity and Similar Hazards)

10517

THE NATIONAL SMALL INDUSTRIES CORPORATION LIMITED, TECHNICAL SERVICES CENTRE - NSIC, Rajpura

9111924

IS 302 : Part 2 : Sec 209 (1994)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 209 low speed food grinding machines

23100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 5 IS 302-2-209 :1994(Rating)	-	500	20% discount to BIS on testing charges
(CI. 6 IS 302-2-209 : 1994(Classification )	-	500	20% discount to BIS on testing charges
Cl. 7 302-2-209 : 1994(Marking)	-	800	20% discount to BIS on testing charges
Cl. 8 302-2-209 : 1994(Protection Against Electric Shock )	-	1500	20% discount to BIS on testing charges
Cl. 10 302-2-209 : 1994(Power Input and Current )	-	1500	20% discount to BIS on testing charges
Cl. 11 302-2-209 : 1994(Temperature Rise)	-	1500	20% discount to BIS on testing charges
Cl. 13 302-2-209 : 1994(Leakage Current & Electric Strength at Operating Temperature)	-	1500	20% discount to BIS on testing charges
Cl. 14 302-2-209 : 1994(Radio and television interference suppression / Transient over voltages)	-	1500	20% discount to BIS on testing charges
Cl. 15 302-2-209 : 1994(Moisture Resistance Test )	-	1500	20% discount to BIS on testing charges
Cl. 16 302-2-209 : 1994(Leakage Current & Electric Strength at Operating Temperature (After Humidity Treatment))	-	1500	20% discount to BIS on testing charges
Cl. 19 302-2-209 : 1994(Abnormal Operation )	-	600	20% discount to BIS on testing charges
Cl. 20 302-2-209 : 1994(Stability & Mechanical Hazards)	-	1500	20% discount to BIS on testing charges
Cl. 21 302-2-209 : 1994(Mechanical strength)	-	1500	20% discount to BIS on testing charges
Cl. 22 302-2-209 : 1994(Construction )	-	600	20% discount to BIS on testing charges
Cl. 23 302-2-209 : 1994(Internal Wiring)	-	600	20% discount to BIS on testing charges
Cl. 24 302-2-209 : 1994(Components)	-	1500	20% discount to BIS on testing charges
Cl. 25 302-2-209 : 1994(Supply Connection & External Flexible Cords)	-	600	20% discount to BIS on testing charges
Cl. 26 302-2-209 : 1994(Terminals for External conductors )	-	600	20% discount to BIS on testing charges
Cl. 27 302-2-209 : 1994(Provision for Earthing )	-	1500	20% discount to BIS on testing charges
Cl. 28 302-2-209 : 1994(Screws & Connections)	-	600	20% discount to BIS on testing charges
Cl. 29 302-2-209 : 1994(Clearances, Creepage Distances & Solid insulation )	-	1500	20% discount to BIS on testing charges
Cl. 30 302-2-209 : 1994(Resistance to Heat Fire & Tracking )	-	600	20% discount to BIS on testing charges
Cl. 31 302-2-209 : 1994(Resistance to Rusting)	-	500	20% discount to BIS on testing charges
Cl. 32 302-2-209 : 1994(Radiation Hazards)	-	0	20% discount to BIS on testing charges
Cl. 9 302-2-209 : 1994(Starting of motor operated appliances)	-	300	20% discount to BIS on testing charges
Cl. 17 302-2-209 : 1994(Overload Protection of Transformers and Associated Circuit)	-	200	20% discount to BIS on testing charges

31 Dec, 2026

-
Restricted upto 6 kW Excluding Cl.19.11.4.1 to Cl.19.11.4.7 (EMI/EMC Test) Cl.32 (Radiation, Toxicity and Similar Hazards)

10518

THE NATIONAL SMALL INDUSTRIES CORPORATION LIMITED, TECHNICAL SERVICES CENTRE - NSIC, Rajpura

9111924

IS 302 : Part 2 : Sec 15 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 15 appliances for heating liquids (First Revision)

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	600	20% discount to BIS on testing charges
7(Marking and instructions)	-	400	20% discount to BIS on testing charges
8(Protection against live parts)	-	1000	20% discount to BIS on testing charges
10(POWER INPUT AND CURRENT)	-	600	20% discount to BIS on testing charges
11(HEATING)	-	600	20% discount to BIS on testing charges
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	600	20% discount to BIS on testing charges
14(TRANSIENT OVERVOLTAGES)	-	400	20% discount to BIS on testing charges
15(MOISTURE RESISTANCE)	-	400	20% discount to BIS on testing charges
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	600	20% discount to BIS on testing charges
19(ABNORMAL OPERATION)	-	600	20% discount to BIS on testing charges
20(STABILITY AND MECHANICAL HAZARDS)	-	800	20% discount to BIS on testing charges
21(MECHANICAL STRENGTH)	-	900	20% discount to BIS on testing charges
22(CONSTRUCTION)	-	100	20% discount to BIS on testing charges
23(INTERNAL WIRING)	-	100	20% discount to BIS on testing charges
24(COMPONENTS)	-	1000	20% discount to BIS on testing charges
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	900	20% discount to BIS on testing charges
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	100	20% discount to BIS on testing charges
27(PROVISION FOR EARTHING)	-	1000	20% discount to BIS on testing charges
28(SCREWS AND CONNECTIONS)	-	200	20% discount to BIS on testing charges
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	700	20% discount to BIS on testing charges
30(RESISTANCE TO HEAT AND FIRE)	-	150	20% discount to BIS on testing charges
31(RESISTANCE TO RUSTING)	-	150	20% discount to BIS on testing charges
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	0	20% discount to BIS on testing charges
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	100	20% discount to BIS on testing charges

31 Dec, 2026

-
Restricted upto 6 kW Excluding Cl.19.11.4.1 to Cl.19.11.4.7 (EMI/EMC Test) Cl.32 (Radiation, Toxicity and Similar Hazards)

10519

THE NATIONAL SMALL INDUSTRIES CORPORATION LIMITED, TECHNICAL SERVICES CENTRE - NSIC, Rajpura

9111924

IS 302 : Part 2 : Sec 14 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 14 electric kitchen machines (First Revision)

12150 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1 )	-	600	20% discount to BIS on testing charges
7.1(Marking- IS 302-1)	-	17	20% discount to BIS on testing charges
7.3(Marking- IS 302-1)	-	17	20% discount to BIS on testing charges
7.4(Marking- IS 302-1)	-	17	20% discount to BIS on testing charges
7.6(Marking- IS 302-1)	-	17	20% discount to BIS on testing charges
7.7(Marking- IS 302-1)	-	17	20% discount to BIS on testing charges
7.8(Marking- IS 302-1)	-	17	20% discount to BIS on testing charges
7.11(Marking- IS 302-1)	-	17	20% discount to BIS on testing charges
7.12(Marking- IS 302-1)	-	17	20% discount to BIS on testing charges
7.13(Marking- IS 302-1)	-	17	20% discount to BIS on testing charges
7.14(Marking- IS 302-1)	-	17	20% discount to BIS on testing charges
7.15(Marking- IS 302-1)	-	16	20% discount to BIS on testing charges
7.101(Marking)	-	14	20% discount to BIS on testing charges
8( Protection Against Electric Shock, IS 302-1)	-	1000	20% discount to BIS on testing charges
10(Power Input and Current, IS 302-1)	-	1000	20% discount to BIS on testing charges
11(Heating, IS 302-1)	-	1000	20% discount to BIS on testing charges
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	300	20% discount to BIS on testing charges
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	300	20% discount to BIS on testing charges
14(Transient Over Voltages, IS 302-1)	-	550	20% discount to BIS on testing charges
15(Moisture Resistance, IS 302-1)	-	300	20% discount to BIS on testing charges
15.1(Moisture Resistance, IS 302-1)	-	300	20% discount to BIS on testing charges
15.2(Moisture Resistance, IS 302-1)	-	300	20% discount to BIS on testing charges
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	475	20% discount to BIS on testing charges
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	475	20% discount to BIS on testing charges
19.1(Abnormal Operation, IS 302-1)	-	50	20% discount to BIS on testing charges
19.7(Abnormal Operation, IS 302-1)	-	50	20% discount to BIS on testing charges
19.9(Abnormal Operation, IS 302-1)	-	50	20% discount to BIS on testing charges
20.1(Stability & Mechanical Hazards, IS 302-1)	-	90	20% discount to BIS on testing charges
20.2(Stability & Mechanical Hazards, IS 302-1)	-	90	20% discount to BIS on testing charges
20.101(Stability & Mechanical Hazards)	-	90	20% discount to BIS on testing charges
20.102(Stability & Mechanical Hazards)	-	90	20% discount to BIS on testing charges
20.103(Stability & Mechanical Hazards)	-	90	20% discount to BIS on testing charges
20.104(Stability & Mechanical Hazards)	-	90	20% discount to BIS on testing charges
20.112(Stability & Mechanical Hazards)	-	90	20% discount to BIS on testing charges
20.113(Stability & Mechanical Hazards)	-	90	20% discount to BIS on testing charges
20.114(Stability & Mechanical Hazards)	-	80	20% discount to BIS on testing charges
21.1(Mechanical Strength, IS 302-1)	-	400	20% discount to BIS on testing charges
21.2(Mechanical Strength, IS 302-1)	-	400	20% discount to BIS on testing charges
22(Construction, IS 302-1)	-	40	20% discount to BIS on testing charges
22.101(Construction)	-	40	20% discount to BIS on testing charges
22.102(Construction)	-	20	20% discount to BIS on testing charges
23.1(Internal Wiring, IS 302-1)	-	12	20% discount to BIS on testing charges
23.2(Internal Wiring, IS 302-1)	-	12	20% discount to BIS on testing charges
23.4(Internal Wiring, IS 302-1)	-	12	20% discount to BIS on testing charges
23.5(Internal Wiring, IS 302-1)	-	12	20% discount to BIS on testing charges
23.6(Internal Wiring, IS 302-1)	-	12	20% discount to BIS on testing charges
23.7(Internal Wiring, IS 302-1)	-	12	20% discount to BIS on testing charges
23.8(Internal Wiring, IS 302-1)	-	12	20% discount to BIS on testing charges
23.9(Internal Wiring, IS 302-1)	-	16	20% discount to BIS on testing charges
24.1(Components, IS 302-1)	-	150	20% discount to BIS on testing charges
24.2(Components, IS 302-1)	-	150	20% discount to BIS on testing charges
24.5(Components, IS 302-1)	-	150	20% discount to BIS on testing charges
24.6(Components, IS 302-1)	-	150	20% discount to BIS on testing charges
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	50	20% discount to BIS on testing charges
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	50	20% discount to BIS on testing charges
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	50	20% discount to BIS on testing charges
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	50	20% discount to BIS on testing charges
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	50	20% discount to BIS on testing charges
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	50	20% discount to BIS on testing charges
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	50	20% discount to BIS on testing charges
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	50	20% discount to BIS on testing charges
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	50	20% discount to BIS on testing charges
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	50	20% discount to BIS on testing charges
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	50	20% discount to BIS on testing charges
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	50	20% discount to BIS on testing charges
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	50	20% discount to BIS on testing charges
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	50	20% discount to BIS on testing charges
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	50	20% discount to BIS on testing charges
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	50	20% discount to BIS on testing charges
26(Terminals for External Conductors, IS 302-1)	-	100	20% discount to BIS on testing charges
27(Provision for Earthing, IS 302-1)	-	160	20% discount to BIS on testing charges
27.2(Provision for Earthing, IS 302-1)	-	160	20% discount to BIS on testing charges
27.3(Provision for Earthing, IS 302-1)	-	160	20% discount to BIS on testing charges
27.4(Provision for Earthing, IS 302-1)	-	160	20% discount to BIS on testing charges
27.5(Provision for Earthing, IS 302-1)	-	160	20% discount to BIS on testing charges
28(Screws & Connections, IS 302-1)	-	100	20% discount to BIS on testing charges
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	350	20% discount to BIS on testing charges
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	350	20% discount to BIS on testing charges
30.1(Resistance to Heat and Fire, IS 302-1)	-	50	20% discount to BIS on testing charges
30.2(Resistance to Heat and Fire, IS 302-1)	-	50	20% discount to BIS on testing charges
31(Resistance of Rusting, IS 302-1)	-	100	20% discount to BIS on testing charges
32(Radiation, Toxicity and similar Hazard IS 302-1)	-	0	20% discount to BIS on testing charges
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	100	20% discount to BIS on testing charges

31 Dec, 2026

-
Restricted upto 6 kW Excluding Cl.19.11.4.1 to Cl.19.11.4.7 (EMI/EMC Test) Cl.32 (Radiation, Toxicity and Similar Hazards)

10520

THE NATIONAL SMALL INDUSTRIES CORPORATION LIMITED, TECHNICAL SERVICES CENTRE - NSIC, Rajpura

9111924

IS 302 : Part 2 : Sec 201 (2008)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 201 electric immersion water heaters (First Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6 of IS 302-‐2-‐201:2008(Classification)	-	100	20% discount to BIS on testing charges
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	200	20% discount to BIS on testing charges
Cl.8 of IS 302‐2-201: 2008(Protection Against Access to Live Parts)	-	500	20% discount to BIS on testing charges
Cl.10 of IS 302‐2‐201:2008(Power Input and Current )	-	1000	20% discount to BIS on testing charges
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	20% discount to BIS on testing charges
Cl.13 of IS 302-2-201: 2008(Leakage Current & Electric Strength at Operating Temperature)	-	400	20% discount to BIS on testing charges
Cl.14 of IS 302‐2-201:2008(Transient Over Voltages )	-	400	20% discount to BIS on testing charges
Cl.15 of IS 302-2-201:2008(Moisture Resistance )	-	1000	20% discount to BIS on testing charges
Cl.16 of IS 302-2-201:2008(Leakage Current & Electric Strength)	-	450	20% discount to BIS on testing charges
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	350	20% discount to BIS on testing charges
Cl.20 of IS 302-2-201: 2008(Stability & Mechanical Hazards)	-	600	20% discount to BIS on testing charges
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	800	20% discount to BIS on testing charges
Cl.22 of IS 302-2-201: 2008(Construction)	-	100	20% discount to BIS on testing charges
Cl.23 of 302-2-201:2008(Internal Wiring )	-	100	20% discount to BIS on testing charges
Cl.24 of IS 302-2-201: 2008(Component)	-	600	20% discount to BIS on testing charges
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	600	20% discount to BIS on testing charges
Cl.26 of IS 302-2-201: 2008(Terminals for External Conductors)	-	100	20% discount to BIS on testing charges
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	600	20% discount to BIS on testing charges
Cl.28 of IS 302-2-201: 2008(Screws & Connections )	-	100	20% discount to BIS on testing charges
Cl.29 of IS 302-2‐201:2008(Clearances, Creepage Distances and Solid Insulation )	-	700	20% discount to BIS on testing charges
Cl.30 of IS 302-2‐201:2008(Resistance to Heat and Fire )	-	100	20% discount to BIS on testing charges
Cl.31 of IS 302-2-201:2008(Resistance of Rusting )	-	100	20% discount to BIS on testing charges
Cl.32 of IS 302-2-201:2008(Radiation, Toxicity and Similar Hazards)	-	0	20% discount to BIS on testing charges
Cl.17 of IS 302‐2-201: 2008(Overload Protection of Transformers & Associated Circuits)	-	100	20% discount to BIS on testing charges

31 Dec, 2026

-
Excluding Cl.19.11.4.1 to Cl.19.11.4.7 (EMI/EMC Test) Cl.32 (Radiation, Toxicity and Similar Hazards)

10521

THE NATIONAL SMALL INDUSTRIES CORPORATION LIMITED, TECHNICAL SERVICES CENTRE - NSIC, Rajpura

9111924

IS 366 (1991)

Electric iron - Specification (Fourth Revision)

16500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.0(Measurement of Heating up time)	-	1100	20% discount to BIS on testing charges
11.0(Measurement of sole plate temperature)	-	1100	20% discount to BIS on testing charges
12.0(Measurement of Tempearture Distribution)	-	1050	20% discount to BIS on testing charges
13.0(Measurement of Initial overswing temperature and Heating up excess temperature)	-	1000	20% discount to BIS on testing charges
14.0(Measurement of Cyclic fluctuation of temperature of hottest point )	-	1000	20% discount to BIS on testing charges
16.0(Measurement of Thermostatic staibility)	-	2000	20% discount to BIS on testing charges
6(Measurement of Thermostatic staibility)	-	400	20% discount to BIS on testing charges
7.0(Classification (as per Cl.6 of IS 302-2-3 and Cl.6.1 of IS 302-1))	-	200	20% discount to BIS on testing charges
9.0(Protection against access to live parts (as per Cl. 8 of IS 302-2-3 and IS 302-1))	-	800	20% discount to BIS on testing charges
9.0(Power input and current (as per Cl. 10 of IS 302-2-3 and IS 302-1))	-	400	20% discount to BIS on testing charges
9.0(Temperature Rise (as per Cl. 11 of IS 302-2-3 and IS 302-1))	-	400	20% discount to BIS on testing charges
9.0(Leakage current and Electric Strength at Operating Temperature (as per Cl. 13 of IS 302-2-3 and IS 302-1))	-	850	20% discount to BIS on testing charges
9.0(Transient Overvoltage (as per of Cl. 14 of IS 302-2-3 and Table 6 of IS 302-1))	-	400	20% discount to BIS on testing charges
9.0(Moisture Resistance (as per of Cl.15 of IS 302-2-3 and IS 302-1))	-	400	20% discount to BIS on testing charges
9.0(Abnormal Operation (as per of Cl.19 of IS 302-2-3 and IS 302-1) )	-	150	20% discount to BIS on testing charges
9.0(Staibilty and mechanical hazards (as per of Cl.20 of IS 302-2-3 and IS 302-1) )	-	600	20% discount to BIS on testing charges
9.0(Mechanical strength (as per of Cl.21 of IS 302-2-3 and IS 302-1) )	-	600	20% discount to BIS on testing charges
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	100	20% discount to BIS on testing charges
9.0(Internal wiring (as per of Cl.23 of IS 302-2-3 and IS 302-1) )	-	100	20% discount to BIS on testing charges
9.0(Components (as per of Cl.24 of IS 302-2-3 and IS 302-1) )	-	150	20% discount to BIS on testing charges
9.0(Supply connection and external flexible cord (as per of Cl.25 of IS 302-2-3 and IS 302-1) )	-	700	20% discount to BIS on testing charges
9.0(Terminals for external conductors (as per of Cl.26 of IS 302-2-3 and IS 302-1) )	-	100	20% discount to BIS on testing charges
9.0(Provision for earthing (as per of Cl.27 of IS 302-2-3 and IS 302-1) )	-	700	20% discount to BIS on testing charges
9.0(Screw and connections (as per of Cl.28 of IS 302-2-3 and IS 302-1))	-	100	20% discount to BIS on testing charges
9.0(Clearances, creepage distances and solid insulation (as per of Cl.29 of IS 302-2-3 and IS 302-1))	-	600	20% discount to BIS on testing charges
9.0(Resistance to Heat and Fire (as per of Cl.30 of IS 302-2-3 and IS 302-1))	-	100	20% discount to BIS on testing charges
9.0(Resistance to Rusting (as per of Cl.31 of IS 302-2-3 and IS 302-1))	-	200	20% discount to BIS on testing charges
8(Marking)	-	100	20% discount to BIS on testing charges
17(Measurement of Thermostatic staibility)	-	100	20% discount to BIS on testing charges
16 of IS 302-2-3(Leakage current electric strength)	-	1000	20% discount to BIS on testing charges

31 Dec, 2026

-
Excluding Cl.19.11.4.1 to Cl.19.11.4.7 (EMI/EMC Test) Cl.32 (Radiation, Toxicity and Similar Hazards)

10522

THE NATIONAL SMALL INDUSTRIES CORPORATION LIMITED, TECHNICAL SERVICES CENTRE - NSIC, Rajpura

9111924

IS 8978 (1992)

Specification for electric instantaneous water heaters (Second Revision)

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6 of IS 302-2-35:2017(Classification)	-	500	20% discount to BIS on testing charges
Cl.7 of IS 302-2-35:2017(Marking)	-	300	20% discount to BIS on testing charges
Cl.8 of IS 302-2-35:2017(Protection Against Access To Live Parts)	-	200	20% discount to BIS on testing charges
Cl.10 of IS 302-2- 35:2017(Power Input & Current )	-	1000	20% discount to BIS on testing charges
Cl.11 of 302-2-35:2017(Heating)	-	800	20% discount to BIS on testing charges
Cl.13 of IS 302-2-35:2017(Leakage Current & Electrical Strength at Operating Temperature )	-	1000	20% discount to BIS on testing charges
Cl.14 of IS 302-2-35:2017(Transient Over Voltages )	-	800	20% discount to BIS on testing charges
Cl.15 of IS 302-2-35:2017(Moisture Resistance )	-	800	20% discount to BIS on testing charges
Cl.16 of IS 302-2-35:2017(Leakage Current and Electric Strength (After Humidity))	-	1000	20% discount to BIS on testing charges
Cl.19 of IS 302-2-35:2017(Abnormal Operation)	-	800	20% discount to BIS on testing charges
Cl.20 of IS 302-2-35:2017(Stability & Mechanical Hazards )	-	200	20% discount to BIS on testing charges
Cl. 21.2 of IS 302-1:2008(Mechanical strength)	-	100	20% discount to BIS on testing charges
Cl.22.101 of IS 302-2-35:2017(Construction : Rated pressure of closed water heater )	-	37	20% discount to BIS on testing charges
Cl.22.102 of IS 302-2-35:2017(Construction : excessive temperature of outlet )	-	37	20% discount to BIS on testing charges
Cl.22.103 of IS 302-2-35:2017(Construction : Pressure relief device operation for closed water heater )	-	37	20% discount to BIS on testing charges
Cl.22.104 of IS 302-2-35:2017(Construction : Pressure in open outlet water heaters )	-	37	20% discount to BIS on testing charges
Cl.22.106 of IS 302-2-35:2017(Construction : Operation of thermal cut out for closed water heater )	-	37	20% discount to BIS on testing charges
Cl.22.107 of IS 302-2-35:2017(Construction : Temperature of outlet )	-	37	20% discount to BIS on testing charges
Cl.22.109 of IS 302-2-35:2017(Construction : Operation of presure switch of open outlet water heater )	-	37	20% discount to BIS on testing charges
Cl.22.110 of IS 302-2-35:2017(Construction : Provision for fixing to wall )	-	41	20% discount to BIS on testing charges
Cl.23 of IS 302-2-35:2017(Internal Wiring)	-	200	20% discount to BIS on testing charges
Cl.24 of IS 302-2-35:2017(Component )	-	600	20% discount to BIS on testing charges
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	1000	20% discount to BIS on testing charges
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	100	20% discount to BIS on testing charges
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	400	20% discount to BIS on testing charges
Cl.28 of IS 302-2-35:2017(Screws and Connections )	-	400	20% discount to BIS on testing charges
Cl.29 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation)	-	800	20% discount to BIS on testing charges
Cl.30.1 of IS 302-1:2008(Resistance to Heat and Fire)	-	200	20% discount to BIS on testing charges
Cl.30.2 of IS 302-1:2008(Resistance to Heat and Fire)	-	200	20% discount to BIS on testing charges
Cl.31 of IS 302-2-35: 2017(Resistance to Rusting )	-	100	20% discount to BIS on testing charges
Cl.32 of IS 302-2-35: 2011(Radiation, Toxicity and Similar Hazards )	-	0	20% discount to BIS on testing charges
Cl.10 of IS 8978 : 1992(Finish)	-	500	20% discount to BIS on testing charges
Cl.12 of IS 8978 : 1992(Endurance)	-	1500	20% discount to BIS on testing charges
Cl.21.1 of IS 302-2-35-2011(Mechanical strength)	-	100	20% discount to BIS on testing charges
Cl.17 IS 302-2-35:2017(Overload Protection of Transformers & Associated circuits )	-	100	20% discount to BIS on testing charges

31 Dec, 2026

-
Excluding Cl.19.11.4.1 to Cl.19.11.4.7 (EMI/EMC Test) Cl.32 of IS 302-2-15 (Radiation, Toxicity and Similar Hazards)

10523

THE NATIONAL SMALL INDUSTRIES CORPORATION LIMITED, TECHNICAL SERVICES CENTRE - NSIC, Rajpura

9111924

IS 302 : Part 2 : Sec 30 (2007)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 30 room heaters (First Revision)

12150 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6 (Classification)	-	400	20% discount on BIS samples.
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	20	20% discount on BIS samples.
Cl.7.3(Marking and Instructions)	-	12	20% discount on BIS samples.
Cl.7.4(Marking and Instructions)	-	12	20% discount on BIS samples.
Cl.7.5(Marking and Instructions)	-	12	20% discount on BIS samples.
Cl.7.6 & IS:302-1:2008(Marking and Instructions)	-	12	20% discount on BIS samples.
Cl.7.8 of IS :302-1:2008(Marking and Instructions)	-	12	20% discount on BIS samples.
Cl.7.9 of IS :302-1:2008(Marking and Instructions)	-	12	20% discount on BIS samples.
Cl.7.10 of IS :302-1:2008(Marking and Instructions)	-	12	20% discount on BIS samples.
Cl.7.11 of IS :302-1:2008(Marking and Instructions)	-	12	20% discount on BIS samples.
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	12	20% discount on BIS samples.
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	12	20% discount on BIS samples.
Cl.7.13 of IS 302-1:2008(Marking and Instructions)	-	12	20% discount on BIS samples.
Cl.7.14 of IS302-1:2008(Marking and Instructions)	-	12	20% discount on BIS samples.
Cl.7.14(Marking and Instructions)	-	12	20% discount on BIS samples.
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	12	20% discount on BIS samples.
Cl.7.101(Marking and Instructions)	-	12	20% discount on BIS samples.
Cl.8 & IS:302-1:2008(Protection Against Access to Live Parts)	-	800	20% discount on BIS samples.
Cl.10 & IS:302-1:2008(Power Input and Current)	-	1000	20% discount on BIS samples.
Cl.11 & IS:302-1:2008(Heating)	-	500	20% discount on BIS samples.
Cl.11.8(Heating)	-	500	20% discount on BIS samples.
Cl.13 & IS:302-1:2008(Leakage Current & Electric Strength at operating temp. )	-	700	20% discount on BIS samples.
Cl.14 & IS:302-1:2008(Transient Over Voltages)	-	400	20% discount on BIS samples.
Cl.15 & IS: 302-1:2008(Moisture Resistance )	-	650	20% discount on BIS samples.
Cl.16 & IS:302-1:2008(Leakage Current & Electric Strength )	-	700	20% discount on BIS samples.
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	80	20% discount on BIS samples.
Cl.19.101(Abnormal Operation.)	-	40	20% discount on BIS samples.
Cl.19.102(Abnormal Operation.)	-	40	20% discount on BIS samples.
Cl.19.103(Abnormal Operation.)	-	40	20% discount on BIS samples.
Cl.19.104(Abnormal Operation.)	-	40	20% discount on BIS samples.
Cl.19.106(Abnormal Operation.)	-	40	20% discount on BIS samples.
Table 8 of IS 302-1:2008(Abnormal Operation.)	-	40	20% discount on BIS samples.
Cl.19.107(Abnormal Operation.)	-	40	20% discount on BIS samples.
Cl.19.108(Abnormal Operation.)	-	40	20% discount on BIS samples.
Cl.19.109(Abnormal Operation.)	-	40	20% discount on BIS samples.
Cl.19.110(Abnormal Operation.)	-	40	20% discount on BIS samples.
Cl.19.112(Abnormal Operation.)	-	40	20% discount on BIS samples.
Cl.19.113(Abnormal Operation.)	-	40	20% discount on BIS samples.
Cl.19.114(Abnormal Operation.)	-	40	20% discount on BIS samples.
Cl.20 & IS:302-1:2008(Stability & Mechanical Hazards)	-	100	20% discount on BIS samples.
Cl.21 & IS:302-1:2008)(Mechanical Strength.)	-	40	20% discount on BIS samples.
Cl.21.2 of IS 302-1:2008(Mechanical Strength.)	-	30	20% discount on BIS samples.
Cl.21.101 (Mechanical Strength.)	-	30	20% discount on BIS samples.
Cl.22.1 of IS 302-1:2008(Construction)	-	40	20% discount on BIS samples.
Cl.22.5 of IS 302-1:2008(Construction)	-	80	20% discount on BIS samples.
Cl.22.6 of IS 302-1:2008(Construction)	-	80	20% discount on BIS samples.
Cl.22.8 of IS 302-1:2008(Construction)	-	80	20% discount on BIS samples.
Cl.22.9 of IS 302-1:2008(Construction)	-	80	20% discount on BIS samples.
Cl.22.11(Construction)	-	80	20% discount on BIS samples.
Cl.22.12 of IS 302-1:2008(Construction)	-	80	20% discount on BIS samples.
Cl.22.13 of IS 302-1:2008(Construction)	-	80	20% discount on BIS samples.
Cl.22.14 of IS 302-1:2008(Construction)	-	60	20% discount on BIS samples.
Cl.22.15 of IS 302-1:2008(Construction)	-	60	20% discount on BIS samples.
Cl.22.18 of IS 302-1:2008(Construction)	-	80	20% discount on BIS samples.
Cl.22.20 of IS 302-1:2008(Construction)	-	80	20% discount on BIS samples.
Cl.22.21 of IS 302-1:2008(Construction)	-	80	20% discount on BIS samples.
Cl.23 & IS:302-1:2008(Internal Wiring )	-	25	20% discount on BIS samples.
Cl.23.4 & Cl.29 of 302-1:2008(Internal Wiring )	-	25	20% discount on BIS samples.
Cl.23.5 of 302-1:2008(Internal Wiring )	-	25	20% discount on BIS samples.
Cl.23.7 of 302-1:2008(Internal Wiring )	-	25	20% discount on BIS samples.
Cl.24.1 of 302-1:2008(Component)	-	100	20% discount on BIS samples.
Cl.24.1.3 (Component)	-	500	20% discount on BIS samples.
C.24.1.4(Component)	-	500	20% discount on BIS samples.
Cl.25.1 of 302-1:2008(Supply Connection and External Flexible Cords )	-	90	20% discount on BIS samples.
Cl. 25.2 of IS 3021:2008(Supply Connection and External Flexible Cords )	-	65	20% discount on BIS samples.
Cl.25.5 of 302-1:2008(Supply Connection and External Flexible Cords )	-	65	20% discount on BIS samples.
Cl.25.6 of 302-1:2008(Supply Connection and External Flexible Cords )	-	65	20% discount on BIS samples.
Cl.25.7.(Supply Connection and External Flexible Cords )	-	65	20% discount on BIS samples.
Cl.25.8(Supply Connection and External Flexible Cords )	-	65	20% discount on BIS samples.
Cl. 25.9(Supply Connection and External Flexible Cords )	-	65	20% discount on BIS samples.
Cl.25.10 of 302-1:2008(Supply Connection and External Flexible Cords )	-	65	20% discount on BIS samples.
Cl. 25.11(Supply Connection and External Flexible Cords )	-	65	20% discount on BIS samples.
Cl. 25.12(Supply Connection and External Flexible Cords )	-	65	20% discount on BIS samples.
Cl. 25.13(Supply Connection and External Flexible Cords )	-	65	20% discount on BIS samples.
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	65	20% discount on BIS samples.
Cl.25.17 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	65	20% discount on BIS samples.
Cl.25.18(Supply Connection and External Flexible Cords )	-	65	20% discount on BIS samples.
Cl.25.20(Supply Connection and External Flexible Cords )	-	65	20% discount on BIS samples.
Cl.26.1 of IS 302-1:2008(Terminal for External Conductors )	-	30	20% discount on BIS samples.
Cl.26.10 of IS 302-1:2008(Terminal for External Conductors )	-	40	20% discount on BIS samples.
Cl.26.11 of IS 302-1:2008(Terminal for External Conductors )	-	30	20% discount on BIS samples.
Cl.27.1 of 302-1:2008(Provision for Earthing.)	-	200	20% discount on BIS samples.
Cl.27.5 of 302-1:2008(Provision for Earthing.)	-	800	20% discount on BIS samples.
Cl.28 of 302-1:2008(Screws and Connections.)	-	100	20% discount on BIS samples.
Cl.29 & IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation)	-	700	20% discount on BIS samples.
Cl.30 & IS:302-1:2008(Resistance to Heat and Fire)	-	100	20% discount on BIS samples.
Cl.30.2.2 of 302-1:2008(Resistance to Heat and Fire)	-	100	20% discount on BIS samples.
Cl.31 & IS:302-1:2008(Resistance to Rusting.)	-	100	20% discount on BIS samples.
Cl.32 & IS:302-1:2008(Radition,Toxicity and similar Hazards.)	-	0	20% discount on BIS samples.
Cl.17 & IS:302-1:2008(Over load Protection of Transformers and Associated Circuits )	-	100	20% discount on BIS samples.
Cl.22.24 of IS:302-2-30:2007(Construction : test of bare heating element)	-	20	20% discount on BIS samples.
Cl.22.101 of IS:302-2-30:2007(Construction : Prevention to contact with heating element)	-	20	20% discount on BIS samples.

31 Dec, 2026

-
Excluding Cl.19.11.4.1 to Cl.19.11.4.7 (EMI/EMC Test) Cl.32 (Radiation, Toxicity and Similar Hazards)

10524

THE NATIONAL SMALL INDUSTRIES CORPORATION LIMITED, TECHNICAL SERVICES CENTRE - NSIC, Rajpura

9111924

IS 4250 (1980)

Specification for domestic electric food - Mixers (Liquidizers And Grinders) (First Revision)

12150 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1 )	-	200	20% discount to BIS on testing charges
7.1(Marking- IS 302-1)	-	100	20% discount to BIS on testing charges
7.4(Marking)	-	50	20% discount to BIS on testing charges
7.6(Marking)	-	50	20% discount to BIS on testing charges
8( Protection Against Electric Shock, IS 302-1)	-	300	20% discount to BIS on testing charges
9(Starting, IS 302-1)	-	300	20% discount to BIS on testing charges
10(Power Input and Current, IS 302-1)	-	1000	20% discount to BIS on testing charges
11(Heating, IS 302-1)	-	1000	20% discount to BIS on testing charges
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	20% discount to BIS on testing charges
15.2(Moisture Resistance-Spillage test)	-	400	20% discount to BIS on testing charges
15(Moisture Resistance, IS 302-1)	-	600	20% discount to BIS on testing charges
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	20% discount to BIS on testing charges
19(Abnormal Operation, IS 302-1)	-	100	20% discount to BIS on testing charges
20(Stability & Mechanical Hazards, IS 302-1)	-	500	20% discount to BIS on testing charges
21(Mechanical Strength, IS 302-1)	-	600	20% discount to BIS on testing charges
22.1(Construction, IS 302-1)	-	15	20% discount to BIS on testing charges
22.3(Construction)	-	15	20% discount to BIS on testing charges
22.4(Construction)	-	15	20% discount to BIS on testing charges
22.5(Construction)	-	15	20% discount to BIS on testing charges
22.6(Construction)	-	15	20% discount to BIS on testing charges
22.8(Construction)	-	15	20% discount to BIS on testing charges
22.9(Construction)	-	15	20% discount to BIS on testing charges
23(Internal Wiring, IS 302-1)	-	100	20% discount to BIS on testing charges
24.1(Components, IS 302-1)	-	40	20% discount to BIS on testing charges
24.2(Components)	-	40	20% discount to BIS on testing charges
24.4(Components)	-	40	20% discount to BIS on testing charges
24.5(Components)	-	40	20% discount to BIS on testing charges
24.6(Components)	-	40	20% discount to BIS on testing charges
24.7(Components)	-	40	20% discount to BIS on testing charges
24.8(Components)	-	40	20% discount to BIS on testing charges
24.9(Components)	-	20	20% discount to BIS on testing charges
25(Supply Connection and External Flexible Cords, IS 302-1)	-	600	20% discount to BIS on testing charges
26(Terminals for External Conductors, IS 302-1)	-	100	20% discount to BIS on testing charges
27(Provision for Earthing, IS 302-1)	-	1000	20% discount to BIS on testing charges
28(Screws & Connections, IS 302-1)	-	100	20% discount to BIS on testing charges
29(Clearances and Distances through Insulation, IS 302-1)	-	600	20% discount to BIS on testing charges
30(Resistance to Heat, Fire, Tracking, IS 302-1)	-	500	20% discount to BIS on testing charges
31(Resistance of Rusting, IS 302-1)	-	100	20% discount to BIS on testing charges
34.2(Operational tests- Grinding coffee (for machines which have a dry grinding arrangement))	-	50	20% discount to BIS on testing charges
34.3(Whisking egg whites )	-	50	20% discount to BIS on testing charges
34.4(IDLI batter-Grinding of black gram)	-	50	20% discount to BIS on testing charges
34.4(IDLI batter-Grinding of rice)	-	50	20% discount to BIS on testing charges
34.5.1 (b)(Operational test for juicers )	-	50	20% discount to BIS on testing charges
34.5.2(Operational test for juicers )	-	50	20% discount to BIS on testing charges
35(Temperature withstand test for bowl)	-	100	20% discount to BIS on testing charges
36(Test for controls )	-	400	20% discount to BIS on testing charges
37(Strength of Assembly )	-	500	20% discount to BIS on testing charges
5(RATING)	-	135	20% discount to BIS on testing charges
Cl.32(Radiation, toxicity and similar hazards)	-	0	20% discount to BIS on testing charges
Cl.18(Endurance)	-	0	20% discount to BIS on testing charges
Cl.22(Construction)	-	10	20% discount to BIS on testing charges

31 Dec, 2026

-
Excluding Cl.19.11.4.1 to Cl.19.11.4.7 (EMI/EMC Test) Cl.32 of IS 302-2-15 (Radiation, Toxicity and Similar Hazards)

10525

THE NATIONAL SMALL INDUSTRIES CORPORATION LIMITED, TECHNICAL SERVICES CENTRE - NSIC, Rajpura

9111924

IS 302 : Part 2 : Sec 3 (2007)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 3 electric iron (First Revision)

10000.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1 )	-	400	20% discount to BIS on testing charges
7.1(Marking- IS 302-1)	-	40	20% discount to BIS on testing charges
7.6(Marking- IS 302-1)	-	20	20% discount to BIS on testing charges
7.8(Marking- IS 302-1)	-	20	20% discount to BIS on testing charges
7.11(Marking- IS 302-1)	-	20	20% discount to BIS on testing charges
7.12(Marking- IS 302-1)	-	20	20% discount to BIS on testing charges
7.13(Marking- IS 302-1)	-	20	20% discount to BIS on testing charges
7.14(Marking- IS 302-1)	-	20	20% discount to BIS on testing charges
7.15(Marking- IS 302-1)	-	20	20% discount to BIS on testing charges
7.101(Marking)	-	20	20% discount to BIS on testing charges
8( Protection Against Electric Shock, IS 302-1)	-	1000	20% discount to BIS on testing charges
10(Power Input and Current, IS 302-1)	-	1000	20% discount to BIS on testing charges
11(Heating, IS 302-1)	-	900	20% discount to BIS on testing charges
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	500	20% discount to BIS on testing charges
14(Transient Over Voltages, IS 302-1)	-	400	20% discount to BIS on testing charges
15.3(Moisture Resistance, IS 302-1)	-	500	20% discount to BIS on testing charges
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	500	20% discount to BIS on testing charges
19.1(Abnormal Operation)	-	75	20% discount to BIS on testing charges
19.101(Abnormal Operation)	-	75	20% discount to BIS on testing charges
20.1(Stability & Mechanical Hazards, IS 302-1)	-	600	20% discount to BIS on testing charges
21.1(Mechanical Strength, IS 302-1)	-	425	20% discount to BIS on testing charges
21.101(Mechanical Strength, IS 302-2-3)	-	425	20% discount to BIS on testing charges
22(Construction, IS 302-1)	-	15	20% discount to BIS on testing charges
22.101(Construction)	-	10	20% discount to BIS on testing charges
22.102(Construction)	-	10	20% discount to BIS on testing charges
22.103(Construction)	-	15	20% discount to BIS on testing charges
22.104(Construction)	-	15	20% discount to BIS on testing charges
22.107(Construction)	-	15	20% discount to BIS on testing charges
23.1(Internal Wiring, IS 302-1)	-	23	20% discount to BIS on testing charges
23.2(Internal Wiring, IS 302-1)	-	11	20% discount to BIS on testing charges
23.3(Internal Wiring, IS 302-1)	-	11	20% discount to BIS on testing charges
23.4(Internal Wiring, IS 302-1)	-	11	20% discount to BIS on testing charges
23.5(Internal Wiring, IS 302-1)	-	11	20% discount to BIS on testing charges
23.7(Internal Wiring, IS 302-1)	-	11	20% discount to BIS on testing charges
23.8(Internal Wiring, IS 302-1)	-	11	20% discount to BIS on testing charges
23.9(Internal Wiring, IS 302-1)	-	11	20% discount to BIS on testing charges
24.1(Components, IS 302-1)	-	100	20% discount to BIS on testing charges
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	50	20% discount to BIS on testing charges
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	50	20% discount to BIS on testing charges
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	50	20% discount to BIS on testing charges
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	50	20% discount to BIS on testing charges
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	50	20% discount to BIS on testing charges
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	50	20% discount to BIS on testing charges
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	50	20% discount to BIS on testing charges
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	50	20% discount to BIS on testing charges
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	50	20% discount to BIS on testing charges
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	50	20% discount to BIS on testing charges
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	50	20% discount to BIS on testing charges
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	50	20% discount to BIS on testing charges
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	50	20% discount to BIS on testing charges
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	50	20% discount to BIS on testing charges
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	50	20% discount to BIS on testing charges
26(Terminals for External Conductors, IS 302-1)	-	100	20% discount to BIS on testing charges
27.1(Provision for Earthing, IS 302-1)	-	160	20% discount to BIS on testing charges
27.2(Provision for Earthing, IS 302-1)	-	160	20% discount to BIS on testing charges
27.3(Provision for Earthing, IS 302-1)	-	160	20% discount to BIS on testing charges
27.4(Provision for Earthing, IS 302-1)	-	160	20% discount to BIS on testing charges
27.5(Provision for Earthing, IS 302-1)	-	160	20% discount to BIS on testing charges
28(Screws & Connections, IS 302-1)	-	100	20% discount to BIS on testing charges
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	300	20% discount to BIS on testing charges
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	300	20% discount to BIS on testing charges
30.1(Resistance to Heat, Fire & Tracking, IS 302-1)	-	50	20% discount to BIS on testing charges
30.2(Resistance to Heat, Fire & Tracking, IS 302-1)	-	50	20% discount to BIS on testing charges
31(Resistance of Rusting, IS 302-1)	-	100	20% discount to BIS on testing charges
32(Radiation, Toxicity and similar Hazard IS 302-1)	-	0	20% discount to BIS on testing charges
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	50	20% discount to BIS on testing charges
22.105(Construction)	-	10	20% discount to BIS on testing charges
22.106(Construction)	-	10	20% discount to BIS on testing charges

31 Dec, 2026

-
Excluding Cl.19.11.4.1 to Cl.19.11.4.7 (EMI/EMC Test) Cl.32 (Radiation, Toxicity and Similar Hazards)

10526

Conformity Testing Labs Pvt. Ltd. Unit 2 (A33)

8139626

IS/ISO 80601 : Part 2 : Sec 61 (2017)

Medical electrical equipment Part 2-61: Particular requirements for basic safety and essential performance of pulse oximeter equipment

525000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
201.4(Power and Current)	-	25000	-
201.5(Temperature, Humidity, Dimensions, Force)	-	25000	-
201.6(Classification of ME EQUIPMENT and ME SYSTEMS)	-	25000	-
201.7(Legibility & Durability of markings)	-	25000	-
201.7.2.9.101(Ingress Protection)	-	25000	-
201.8(Current, Voltage, Energy, Dimensions, Impedance)	-	45000	-
201.8.3.101(Current, Voltage, Energy, Dimensions, Impedance)	-	45000	-
201.8.5.5.1(Voltage, Time)	-	45000	-
201.8.5.5.2(Energy)	-	45000	-
201.9(Mechanical dimensions, strength , torque, force)	-	25000	-
201.10(Protection against unwanted and excessive radiation HAZARDS)	-	25000	-
201.11(Temperature)	-	45000	-
201.11.6.5.101(Temperature)	-	45000	-
201.11.8.101(Power)	-	45000	-
201.11.8.101.1(Power)	-	45000	-
201.11.8.101.2(Temperature)	-	45000	-
201.11.8.101.3(Temperature)	-	45000	-
201.12(Accuracy of controls and instruments and protection against hazardous outputs)	-	175000	-
201.12.1.101, 201.12.1.101.1(SpO2 ACCURACY)	-	175000	-
201.12.1.101.2(SpO2 ACCURACY)	-	175000	-
201.12.1.101.3(SpO2 ACCURACY)	-	175000	-
201.12.1.101.4(SpO2 ACCURACY)	-	175000	-
201.12.1.102(SpO2 ACCURACY)	-	175000	-
201.12.1.103(SpO2 ACCURACY)	-	175000	-
201.13(Temperature, Voltage, Current)	-	25000	-
201.13.101(Temperature, Voltage, Current)	-	25000	-
201.15(Mechanical strength, Temperature, current)	-	25000	-
201.15.3.5.101.1(Shock and vibration)	-	25000	-
201.15.101(Shock and vibration)	-	25000	-
201.16(Leakage currents , dielectirc strength)	-	25000	-
201.17(Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS)	-	25000	-
201.12.1.104(Pulse rate ACCURACY)	-	25000	-
201.12.4(Protection against hazardous output)	-	25000	-
208(Alarm system verification)	-	100000	-
208.6.1.2.101(Alarm system verification)	-	100000	-
211(Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment)	-	100000	-
212(Requirements for medical electrical equipment and medical electrical systems used in the emergency medical services environment)	-	100000	-
202(Electromagnetic disturbances – Requirements and tests)	-	250000	-
201.101(PULSE OXIMETER PROBES and PROBE CABLE EXTENDERS)	-	25000	-
201.102(Saturation pulse INFORMATION SIGNAL)	-	25000	-
201.103(FUNCTIONAL CONNECTION)	-	25000	-

05 Apr, 2030

-
Included w.e.f. 09.08.2024 Exclusion: Cl.202 (Electromagnetic disturbances – Requirements and tests), Cl. 201.17 (Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS)

10527

DELHI TEST HOUSE (A Unit of Delhii Test House Global LLP), Azadpur

8131406

IS 12650 (2018)

Textiles – Jute bags for packing 50 kg foodgrains – Specification (third revision)

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4-4.2(Manufacture-The number of stitches per decimeter shall be 10 ±1.)	-	250	NA
4-4.3(Manufacture-Safety Stitch-The number of safety union stitches per decimetre shall be10 ± 1.)	-	250	NA
4-4.1(MANUFACTURE- The bags shall be made from single piece of twill weave jute sacking of uniform construction having nominal mass of 579 g/m2 as given below with warp running along the length of the bag:)	-	250	NA
4-4.1-a)(MANUFACTURE)	-	250	NA
4-4.1-b)(MANUFACTURE)	-	250	NA
4-4.1(MANUFACTURE)	-	250	NA
4-4.1(MANUFACTURE)	-	250	NA
4-4.2(Manufacture)	-	250	NA
4-4.3(Manufacture-Safety Stitch )	-	250	NA
4-4.4(Manufacture-Hemming at the Mouth )	-	250	NA
4-4.5(Manufacture- Freedom from Defects )	-	250	NA
5-5.1-Table 1-Sr. no. i)(SPECIFIC REQUIREMENTS-Dimensions (see Note 1) Cl. 8.3.2 of IS 9113 a) Out side Length , cm 94 (For both type A & Type B) Tolerance + 4 / -0 cm)	-	250	NA
5-5.1-Table 1-Sr. no. i)(SPECIFIC REQUIREMENTS-Dimensions (see Note 1) Cl. 8.3.2 of IS 9113 b) Outside width, cm 57 (For both type A & Type B) Tolerance + 4 / -0 cm)	-	250	NA
5-5.1-Table 1-Sr. no.i i)(SPECIFIC REQUIREMENTS-Cl. 8.4.2 of IS 9113 Ends/dm Type A 46 + 2 /Type B 76 + 4 / -3)	-	500	NA
5-5.1-Table 1-Sr. no.iii)(SPECIFIC REQUIREMENTS-Cl. 8.4.2 of IS 9113 Picks/dm Type A 50 (2 x 25) / Type B 28 + 2)	-	500	NA
5-5.1-Table 1-Sr. no.iv)(SPECIFIC REQUIREMENTS-Cl. 8.5.2 of IS 9113 Corrected Mass/bag, g ( See Note 2) For both Type A & Type B 665 + 8.0 / -6.0 percent)	-	500	NA
5-5.1-Table 1-Sr. No.v)(SPECIFIC REQUIREMENTS-Cl. 8.6.2 of IS 9113 Average breaking strength of sacking (ravelled-strip method, 10 cm × 20 cm), Min, N (kgf): a ) Warpway- 1570 (160) for both type A & Type B)	-	500	NA
5-5.1-Table 1-Sr. No.v)(SPECIFIC REQUIREMENTS-Cl. 8.6.2 of IS 9113 Average breaking strength of sacking (ravelled-strip method, 10 cm × 20 cm), Min, N (kgf): b ) Weftway- 1420 (145) for both type A & Type B)	-	500	NA
5-5.1-Table 1-Sr. No.vi)(SPECIFIC REQUIREMENTS-Cl. 8.7 of IS 9113 Average side seam strength (5 cm ×20 cm raveled strip), Min, N (kgf): 490 (50) for both type A & Type B)	-	500	NA
5-5.1-Table 1-Sr. No.vii)(SPECIFIC REQUIREMENTS-Cl. 8.2 of IS 9113 Moisture regain, percent, Max (see Note 3) 22 for both type A & Type B)	-	500	NA
5-5.4-5.4.1-5.4.1.2(Additional Requirements for Labelling as Environment Friendly Products-General Requirement)	-	1000	NA
5-5.4-5.4.1-5.4.1.3(Additional Requirements for Labelling as Environment Friendly Products-General Requirement)	-	1000	NA
4-4.2(Manufacture-The number of stitches per decimeter shall be 10 ±1.)	-	250	NA
4-4.3(Manufacture-Safety Stitch-The number of safety union stitches per decimetre shall be10 ± 1.)	-	250	NA
4-4.1(MANUFACTURE- The bags shall be made from single piece of twill weave jute sacking of uniform construction having nominal mass of 579 g/m2 as given below with warp running along the length of the bag:)	-	250	NA
4-4.1-a)(MANUFACTURE)	-	250	NA
4-4.1-b)(MANUFACTURE)	-	250	NA
4-4.1(MANUFACTURE)	-	250	NA
4-4.1(MANUFACTURE)	-	250	NA
4-4.2(Manufacture)	-	250	NA
4-4.3(Manufacture-Safety Stitch )	-	250	NA
4-4.4(Manufacture-Hemming at the Mouth )	-	250	NA
4-4.5(Manufacture- Freedom from Defects )	-	250	NA
5-5.1-Table 1-Sr. no. i)(SPECIFIC REQUIREMENTS-Dimensions (see Note 1) Cl. 8.3.2 of IS 9113 a) Out side Length , cm 94 (For both type A & Type B) Tolerance + 4 / -0 cm)	-	500	NA
5-5.1-Table 1-Sr. no. i)(SPECIFIC REQUIREMENTS-Dimensions (see Note 1) Cl. 8.3.2 of IS 9113 b) Outside width, cm 57 (For both type A & Type B) Tolerance + 4 / -0 cm)	-	500	NA
5-5.1-Table 1-Sr. no.i i)(SPECIFIC REQUIREMENTS-Cl. 8.4.2 of IS 9113 Ends/dm Type A 46 + 2 /Type B 76 + 4 / -3)	-	500	NA
5-5.1-Table 1-Sr. no.iii)(SPECIFIC REQUIREMENTS-Cl. 8.4.2 of IS 9113 Picks/dm Type A 50 (2 x 25) / Type B 28 + 2)	-	500	NA
5-5.1-Table 1-Sr. no.iv)(SPECIFIC REQUIREMENTS-Cl. 8.5.2 of IS 9113 Corrected Mass/bag, g ( See Note 2) For both Type A & Type B 665 + 8.0 / -6.0 percent)	-	500	NA
5-5.1-Table 1-Sr. No.v)(SPECIFIC REQUIREMENTS-Cl. 8.6.2 of IS 9113 Average breaking strength of sacking (ravelled-strip method, 10 cm × 20 cm), Min, N (kgf): a ) Warpway- 1570 (160) for both type A & Type B)	-	500	NA
5-5.1-Table 1-Sr. No.v)(SPECIFIC REQUIREMENTS-Cl. 8.6.2 of IS 9113 Average breaking strength of sacking (ravelled-strip method, 10 cm × 20 cm), Min, N (kgf): b ) Weftway- 1420 (145) for both type A & Type B)	-	500	NA
5-5.1-Table 1-Sr. No.vi)(SPECIFIC REQUIREMENTS-Cl. 8.7 of IS 9113 Average side seam strength (5 cm ×20 cm raveled strip), Min, N (kgf): 490 (50) for both type A & Type B)	-	500	NA
5-5.1-Table 1-Sr. No.vii)(SPECIFIC REQUIREMENTS-Cl. 8.2 of IS 9113 Moisture regain, percent, Max (see Note 3) 22 for both type A & Type B)	-	500	NA
5-5.1-Table 1-Sr. No.viii)(SPECIFIC REQUIREMENTS-Cl. 8.8 of IS 9113 Oil content on dry de-oiled material, Max 3 for both type A & Type B)	-	500	NA
5-5.3(SPECIFIC REQUIREMENTS - The contract moisture regain shall be 20 percent. )	-	500	NA
5-5.4-5.4.1-5.4.1.1(Additional Requirements for Labelling as Environment Friendly Products-General Requirement)	-	1000	NA
5-5.4-5.4.1-5.4.1.2(Additional Requirements for Labelling as Environment Friendly Products-General Requirement)	-	1000	NA
5-5.1-Table 1-Sr. no. i)(SPECIFIC REQUIREMENTS-Dimensions (see Note 1) Cl. 8.3.2 of IS 9113 a) Out side Length , cm 94 (For both type A & Type B) Tolerance + 4 / -0 cm)	-	500	NA
5-5.1-Table 1-Sr. no. i)(SPECIFIC REQUIREMENTS-Dimensions (see Note 1) Cl. 8.3.2 of IS 9113 b) Outside width, cm 57 (For both type A & Type B) Tolerance + 4 / -0 cm)	-	500	NA
5-5.1-Table 1-Sr. no.i i)(SPECIFIC REQUIREMENTS-Cl. 8.4.2 of IS 9113 Ends/dm Type A 46 + 2 /Type B 76 + 4 / -3)	-	500	NA
5-5.1-Table 1-Sr. no.iii)(SPECIFIC REQUIREMENTS-Cl. 8.4.2 of IS 9113 Picks/dm Type A 50 (2 x 25) / Type B 28 + 2)	-	500	NA
5-5.1-Table 1-Sr. no.iv)(SPECIFIC REQUIREMENTS-Cl. 8.5.2 of IS 9113 Corrected Mass/bag, g ( See Note 2) For both Type A & Type B 665 + 8.0 / -6.0 percent)	-	500	NA
5-5.1-Table 1-Sr. No.v)(SPECIFIC REQUIREMENTS-Cl. 8.6.2 of IS 9113 Average breaking strength of sacking (ravelled-strip method, 10 cm × 20 cm), Min, N (kgf): a ) Warpway- 1570 (160) for both type A & Type B)	-	500	NA
5-5.1-Table 1-Sr. No.v)(SPECIFIC REQUIREMENTS-Cl. 8.6.2 of IS 9113 Average breaking strength of sacking (ravelled-strip method, 10 cm × 20 cm), Min, N (kgf): b ) Weftway- 1420 (145) for both type A & Type B)	-	500	NA
5-5.1-Table 1-Sr. No.vi)(SPECIFIC REQUIREMENTS-Cl. 8.7 of IS 9113 Average side seam strength (5 cm ×20 cm raveled strip), Min, N (kgf): 490 (50) for both type A & Type B)	-	500	NA
5-5.1-Table 1-Sr. No.vii)(SPECIFIC REQUIREMENTS-Cl. 8.2 of IS 9113 Moisture regain, percent, Max (see Note 3) 22 for both type A & Type B)	-	500	NA
5-5.1-Table 1-Sr. No.viii)(SPECIFIC REQUIREMENTS-Cl. 8.8 of IS 9113 Oil content on dry de-oiled material, Max 3 for both type A & Type B)	-	500	NA
5-5.2-Table 2-Sr. No.iv)(SPECIFIC REQUIREMENTS- Cl. 8.1 of IS 9113 Corrected net mass of a bale, kg)	-	500	NA
5-5.3(SPECIFIC REQUIREMENTS - The contract moisture regain shall be 20 percent. )	-	500	NA
5-5.4-5.4.2-5.4.2.1-Table 3- Sr. no. ii)(Additional Requirements for Labelling as Environment Friendly Products-General Requirement-Specific requirements For Eco Marks- a) Pesticides (Sum parameter) (see Not 2) , mg/kg (ppm) max. limit , 1.0 )	-	500	NA
5-5.4-5.4.2-5.4.2.1-Table 3- Sr. no. ii)(Additional Requirements for Labelling as Environment Friendly Products-General Requirement-Specific requirements For Eco Marks- b) Banned Pesticides , mg/kg (ppm) max. limit , Nil (below detectable lmit))	-	500	NA
5-5.4-5.4.2-5.4.2.1-Table 3- Sr. no. iii)(Additional Requirements for Labelling as Environment Friendly Products-General Requirement-Specific requirements For Eco Marks- pH of aqueous extract , mg/kg (ppm) max. limit , 6.0-7.0)	-	500	NA
5-5.1-Table 1-Sr. No.viii)(SPECIFIC REQUIREMENTS-Cl. 8.8 of IS 9113 Oil content on dry de-oiled material, Max 3 for both type A & Type B)	-	500	NA
5-5.3(SPECIFIC REQUIREMENTS - The contract moisture regain shall be 20 percent. )	-	500	NA
5-5.4-5.4.1-5.4.1.1(Additional Requirements for Labelling as Environment Friendly Products-General Requirement)	-	1000	NA
5-5.4-5.4.2-5.4.2.1-Table 3- Sr. no. ii)(Additional Requirements for Labelling as Environment Friendly Products-General Requirement-Specific requirements For Eco Marks- a) Pesticides (Sum parameter) (see Not 2) , mg/kg (ppm) max. limit , 1.0 )	-	1000	NA
5-5.4-5.4.2-5.4.2.1-Table 3- Sr. no. ii)(Additional Requirements for Labelling as Environment Friendly Products-General Requirement-Specific requirements For Eco Marks- b) Banned Pesticides , mg/kg (ppm) max. limit , Nil (below detectable lmit))	-	1000	NA
5-5.4-5.4.2-5.4.2.1-Table 3- Sr. no. iii)(Additional Requirements for Labelling as Environment Friendly Products-General Requirement-Specific requirements For Eco Marks- pH of aqueous extract , mg/kg (ppm) max. limit , 6.0-7.0)	-	1000	NA
4-4.2(Manufacture-The number of stitches per decimeter shall be 10 ±1.)	-	250	NA
4-4.3(Manufacture-Safety Stitch-The number of safety union stitches per decimetre shall be10 ± 1.)	-	250	NA
4-4.1(MANUFACTURE- The bags shall be made from single piece of twill weave jute sacking of uniform construction having nominal mass of 579 g/m2 as given below with warp running along the length of the bag:)	-	250	NA
4-4.1-a)(MANUFACTURE)	-	250	NA
4-4.1-b)(MANUFACTURE)	-	250	NA
4-4.1(MANUFACTURE)	-	250	NA
4-4.1(MANUFACTURE)	-	250	NA
4-4.2(Manufacture)	-	250	NA
4-4.3(Manufacture-Safety Stitch )	-	250	NA
4-4.4(Manufacture-Hemming at the Mouth )	-	250	NA
4-4.5(Manufacture- Freedom from Defects )	-	250	NA
5-5.4-5.4.1-5.4.1.1(Additional Requirements for Labelling as Environment Friendly Products-General Requirement)	-	500	NA
5-5.4-5.4.1-5.4.1.2(Additional Requirements for Labelling as Environment Friendly Products-General Requirement)	-	500	NA
5-5.4-5.4.1-5.4.1.3(Additional Requirements for Labelling as Environment Friendly Products-General Requirement)	-	500	NA
5-5.4-5.4.1-5.4.1.4(Additional Requirements for Labelling as Environment Friendly Products-General Requirement)	-	500	NA
5-5.4-5.4.1-5.4.1.5(Additional Requirements for Labelling as Environment Friendly Products-General Requirement)	-	500	NA
5-5.4-5.4.1-5.4.1.6(Additional Requirements for Labelling as Environment Friendly Products-General Requirement)	-	500	NA
5-5.4-5.4.2-5.4.2.1-Table 3- Sr. no. ii)(Additional Requirements for Labelling as Environment Friendly Products-General Requirement-Specific requirements For Eco Marks- a) Pesticides (Sum parameter) (see Not 2) , mg/kg (ppm) max. limit , 1.0 )	-	500	NA
5-5.4-5.4.2-5.4.2.1-Table 3- Sr. no. ii)(Additional Requirements for Labelling as Environment Friendly Products-General Requirement-Specific requirements For Eco Marks- b) Banned Pesticides , mg/kg (ppm) max. limit , Nil (below detectable lmit))	-	500	NA
5-5.4-5.4.2-5.4.2.1-Table 3- Sr. no. iii)(Additional Requirements for Labelling as Environment Friendly Products-General Requirement-Specific requirements For Eco Marks- pH of aqueous extract , mg/kg (ppm) max. limit , 6.0-7.0)	-	500	NA

17 Jun, 2027

-
Included w.e.f.02.12.2024

10528

DELHI TEST HOUSE (A Unit of Delhii Test House Global LLP), Azadpur

8131406

IS 10931 (2023)

Lauric Acid - Specification (first revision of IS 10931)

16000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Description)	-	1000	NA
4.2 Table 1 (i)(Moisture)	-	1500	NA
4.2 Table 1 (ii)(Saponification value)	-	1500	NA
4.2 Table 1 (iii)(Acid value differ from Saponification value)	-	1500	NA
4.2 Table 1 (iv)(Iodine value)	-	1500	NA
4.2 Table 1 (v)(Unsaponifiable matter)	-	1500	NA
4.2 Table 1 (vi)(Titre)	-	1500	NA
4.2 Table 1 (vii)(Colour, 51/4 inch cell, Y + 5R)	-	1000	NA
4.3 Table 2 (i)(C8:0 + C10 : 0)	-	3000	NA
4.3 Table 2 (ii)(C12 : 0)	-	3000	NA
4.3 Table 2 (i)(C14 : 0 + C16 : 0)	-	3000	NA
4.3 Table 3 (i)(C8 : 0 + C10 : 0)	-	3000	NA
4.3 Table 3 (ii)(C12 : 0)	-	3000	NA
4.3 Table 3 (iii)(C14 : 0)	-	3000	NA
4.3 Table 2 (iv)(C16 : 0)	-	3000	NA
4.3 Table 2 (v)(Others)	-	4000	NA

17 Jun, 2027

-
Included w.e.f 15.10.2024

10529

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 1897 (2008)

Copper strip for electrical purposes - Specification (Third Revision)

Copper strip

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
CLAUSE 4(SUPPLY OF MATERIAL)	-	100	-
CLAUSE 6(CHEMICAL COMPOSITION)	-	7000	-
CLAUSE 8(MECHANICAL PROPERTIES)	-	2500	-
CLAUSE 8.2(Bend Test)	-	500	-
CLAUSE 9(ELECTRICAL RESISTIVITY TEST)	-	3000	-
CLAUSE 10(TEST FOR CONTROLLED PROOF RESISTANCE (OPTIONAL))	-	0	-
CLAUSE 11(DlMENSIONS AND TOLERANCES)	-	1900	-
CLAUSE 13(RETEST)	-	0	-

31 Dec, 2029

-
Included w.e.f. 12.04.2024

10530

DELHI TEST HOUSE (A Unit of Delhii Test House Global LLP), Azadpur

8131406

IS 12067 (2023)

Palm fatty acids - Specification (first revision of IS 12067)

16500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1&4.2(Description)	-	500	NA
Cl.4.3 (i)(Moisture - 6 of IS 548 (Part 1/Sec 2))	-	1500	NA
Cl. 4.3 (ii)(Saponification Value - 16 of IS 548 (Part 1/Sec 2))	-	1500	NA
Cl. 4.3 (iii)(Acid Value - 8 of IS 548 (Part 1/Sec 2))	-	1500	NA
Cl. 4.3 (iv)(Iodine Value - 15 of IS 548 (Part 1/Sec 2))	-	1500	NA
Cl. 4.3 (v)(Mineral Acidity - ANNEX A2 of IS 12067:2023)	-	1500	NA
Cl. 4.3 (vi)(Ash - ANNEX A1 of IS 12067:2023)	-	1500	NA
Cl. 4.3 (vii)(Unsaponifiable matter - 9 of IS 548 (Part 1/ Sec 2))	-	1500	NA
Cl. 4.3 (viii)(Titre Test - 13 of IS 548 (Part 1/Sec 2))	-	1500	NA
Cl. 4.3 (ix)(Colour - 14.1 of IS 548 (Part 1/Sec 2))	-	1000	NA
Cl. 4.3 (x)(Flash point - IS 1448 (Part 21))	-	1000	NA
Cl. 4.4(Fatty Acid Composition of Palm Fatty Acids)	-	2000	NA
4.1(Description - IS 12067:2023)	-	500	NA
4.2(Description - IS 12067:2023)	-	500	NA
4.3, Table 1 (i)(Moisture - IS 548 (Part 1/Sec 2) : 2021)	-	1500	NA
4.3, Table 1 (ii)(Saponification - IS 548 (Part 1/Sec 2) : 2021)	-	1500	NA
4.3, Table 1 (iii)(Acid value shall not differ from saponification value - IS 548 (Part 1/Sec 2) : 2021)	-	1500	NA
4.3, Table 1 (iv)(Iodine Value - IS 548 (Part 1/Sec 2) : 2021)	-	1500	NA
4.3, Table 1 (v)(Mineral Acidity - IS 12067:1987)	-	1500	NA
4.3, Table 1 (vi)(Ash - IS 12067:1987)	-	1500	NA
4.3, Table 1 (vii)(Unsaponifiable matter - IS 548 (Part 1/Sec 2) : 2021)	-	1500	NA
4.3, Table 1 (viii)(Titre - IS 548 (Part 1/Sec 2) : 2021)	-	1500	NA
4.3, Table 1 (ix)(Colour, 1-inch cell, Y +5R)	-	1000	NA
4.3, Table 1 (x)(Flash Point - IS 1448 (P-21))	-	1500	NA
4.4, Table 2 (i)(C6 : 0)	-	2000	NA
4.4, Table 2 (ii)(C8 : 0)	-	2000	NA
4.4, Table 2 (iii)(C10 : 0)	-	2000	NA
4.4, Table 2 (iv)(C12 : 0)	-	2000	NA
4.4, Table 2 (v)(C14 : 0)	-	2000	NA
4.4, Table 2 (vi)(C16 : 0)	-	2000	NA
4.4, Table 2 (vii)(C16 :1)	-	2000	NA
4.4, Table 2 (viii)(C17 : 0)	-	2000	NA
4.4, Table 2 (ix)(C17 : 1)	-	2000	NA
4.4, Table 2 (x)(C18 : 0)	-	2000	NA
4.4, Table 2 (xi)(C18 : 1)	-	2000	NA
4.4, Table 2 (xii)(C18 : 2)	-	2000	NA
4.4, Table 2 (xiii)(C18 : 3)	-	2000	NA
4.4, Table 2 (xiv)(C20 : 0)	-	2000	NA
4.4, Table 2 (xv)(C20 : 1)	-	2000	NA
4.4, Table 2 (xvi)(C20 : 2)	-	2000	NA
4.4, Table 2 (xvii)(C22 : 0)	-	2000	NA
4.4, Table 2 (xviii)(C22 : 1)	-	2000	NA
4.4, Table 2 (xix)(C22 : 2)	-	2000	NA
4.4, Table 2 (xx)(C24 : 0)	-	2000	NA
4.4, Table 2 (xxi)(C24 : 1)	-	2000	NA
4.1&4.2(Description)	-	-	-
Cl.4.3 (i)(Moisture - 6 of IS 548 (Part 1/Sec 2))	-	-	-
Cl. 4.3 (ii)(Saponification Value - 16 of IS 548 (Part 1/Sec 2))	-	-	-
Cl. 4.3 (iii)(Acid Value - 8 of IS 548 (Part 1/Sec 2))	-	-	-
Cl. 4.3 (iv)(Iodine Value - 15 of IS 548 (Part 1/Sec 2))	-	-	-
Cl. 4.3 (v)(Mineral Acidity - ANNEX A2 of IS 12067:2023)	-	-	-
Cl. 4.3 (vi)(Ash - ANNEX A1 of IS 12067:2023)	-	-	-
Cl. 4.3 (vii)(Unsaponifiable matter - 9 of IS 548 (Part 1/ Sec 2))	-	-	-
Cl. 4.3 (viii)(Titre Test - 13 of IS 548 (Part 1/Sec 2))	-	-	-
Cl. 4.3 (ix)(Colour - 14.1 of IS 548 (Part 1/Sec 2))	-	-	-
Cl. 4.3 (x)(Flash point - IS 1448 (Part 21))	-	-	-
Cl. 4.4(Fatty Acid Composition of Palm Fatty Acids)	-	-	-
4.1(Description - IS 12067:2023)	-	-	-
4.2(Description - IS 12067:2023)	-	-	-
4.3, Table 1 (i)(Moisture - IS 548 (Part 1/Sec 2) : 2021)	-	-	-
4.3, Table 1 (ii)(Saponification - IS 548 (Part 1/Sec 2) : 2021)	-	-	-
4.3, Table 1 (iii)(Acid value shall not differ from saponification value - IS 548 (Part 1/Sec 2) : 2021)	-	-	-
4.3, Table 1 (iv)(Iodine Value - IS 548 (Part 1/Sec 2) : 2021)	-	-	-
4.3, Table 1 (v)(Mineral Acidity - IS 12067:1987)	-	-	-
4.3, Table 1 (vi)(Ash - IS 12067:1987)	-	-	-
4.3, Table 1 (vii)(Unsaponifiable matter - IS 548 (Part 1/Sec 2) : 2021)	-	-	-
4.3, Table 1 (viii)(Titre - IS 548 (Part 1/Sec 2) : 2021)	-	-	-
4.3, Table 1 (ix)(Colour, 1-inch cell, Y +5R)	-	-	-
4.3, Table 1 (x)(Flash Point - IS 1448 (P-21))	-	-	-
4.4, Table 2 (i)(C6 : 0)	-	-	-
4.4, Table 2 (ii)(C8 : 0)	-	-	-
4.4, Table 2 (iii)(C10 : 0)	-	-	-
4.4, Table 2 (iv)(C12 : 0)	-	-	-
4.4, Table 2 (v)(C14 : 0)	-	-	-
4.4, Table 2 (vi)(C16 : 0)	-	-	-
4.4, Table 2 (vii)(C16 :1)	-	-	-
4.4, Table 2 (viii)(C17 : 0)	-	-	-
4.4, Table 2 (ix)(C17 : 1)	-	-	-
4.4, Table 2 (x)(C18 : 0)	-	-	-
4.4, Table 2 (xi)(C18 : 1)	-	-	-
4.4, Table 2 (xii)(C18 : 2)	-	-	-
4.4, Table 2 (xiii)(C18 : 3)	-	-	-
4.4, Table 2 (xiv)(C20 : 0)	-	-	-
4.4, Table 2 (xv)(C20 : 1)	-	-	-
4.4, Table 2 (xvi)(C20 : 2)	-	-	-
4.4, Table 2 (xvii)(C22 : 0)	-	-	-
4.4, Table 2 (xviii)(C22 : 1)	-	-	-
4.4, Table 2 (xix)(C22 : 2)	-	-	-
4.4, Table 2 (xx)(C24 : 0)	-	-	-
4.4, Table 2 (xxi)(C24 : 1)	-	-	-

17 Jun, 2027

-
Included w.e.f 09.11.2024

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number