| 10561 |
BIS, Central Laboratory (CL)
| IS 8944 (2005) |
Chlorpyrifos, emulsifiable concentrates - Specification (First Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.2.1 (Description) |
- |
|
|
|
| 3.2.2 (Cold Test) |
- |
|
|
|
| 3.2.3 (Flash Point (Abel)) |
- |
|
|
|
| 3.2.4 (Emulsion Stability) |
- |
|
|
|
| 3.3.1 (Chloropyrifos content) |
- |
|
|
|
| 3.3.2 (Acidity (as H2SO4), ) |
- |
|
|
|
| 3.2.1 (Description) |
- |
|
|
|
|
- |
-
Excluding Cl. 3.3.1 Content; |
| 10562 |
BIS, Southern Regional Laboratory (SRL)
| IS 10109 (2018) |
Oil pressure stoves - Offset burner type - Specification (Second Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 9.6 (Resistance to Draught) |
- |
|
|
|
| 9.7 (Fuel Creep) |
- |
|
|
|
| 9.1.1 (Air Pressure Test) |
- |
|
|
|
| 9.1.2 ( Safety Pressure Test) |
- |
|
|
|
| 9.1.3 (Bursting Pressure Test) |
- |
|
|
|
| 5.4 (Plastic components (for example, handles) shall be free from fissures, distortions, blemishes and discolouration.) |
- |
|
|
|
| 6.2 (The vassel when kept on the stove shall not touch burner top.) |
- |
|
|
|
| 6.4 (Minimum Sheet thickness of fuel container) |
- |
|
|
|
| 6.5 (Maximum height of the fuel feed pipe into the container from the bottom) |
- |
|
|
|
| 7.1.1 (Construction, General) |
- |
|
|
|
| 7.1.1 (Construction, General) |
- |
|
|
|
| 7.1.1 (Construction, General The base of the fuel container clear from the ground ) |
- |
|
|
|
| 7.1.1 (Construction, General The fuel container may be of detachable type) |
- |
|
|
|
| 7.1.3 (Regulator near the socket may be provided for opening or closing of the fuel supply.In case the Regulator is not provided,the kerosene oil should not come out of the nipple when the tank is full under atmospheric pressure.) |
- |
|
|
|
| 7.3 (Pump) |
- |
|
|
|
| 7.4 ( Pressure Release Screw) |
- |
|
|
|
| 7.7 (Taps) |
- |
|
|
|
| 7.1 (Pricker) |
- |
|
|
|
|
- |
-
" 1 set "
Excluding Except Burner assembly, Washer, Workmanship, Fuel Consumption & Thermal efficiency , |
| 10563 |
BIS, Southern Regional Laboratory (SRL)
| IS 3205 (1984) |
Specification for precipitated barium carbonate, technical (First Revision) |
- |
Rs 1575/- Grade 1; Rs 1125/- for Gr 2 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.1 (Description) |
- |
|
|
|
| 3.2, Table 1 and Appendix A-2 of IS 3205 (Barium (as Ba ) - for All Grades) |
- |
|
|
|
| 3.2, Table 1 and Appendix A-4 of IS 3205 (Moisture - For Grade 1 ) |
- |
|
|
|
| 3.2, Table 1 and Appendix A-4 of IS 3205 (Moisture - For Grade 2) |
- |
|
|
|
| 3.2, Table 1 and Appendix A-5 of IS 3205 (Matter insolubile in hydrochloric acid - For Grade 1) |
- |
|
|
|
| 3.2, Table 1 and Appendix A-5 of IS 3205 (Matter insolubile in hydrochloric acid - For Grade 2) |
- |
|
|
|
| 3.2, Table 1 and Appendix A-6 of IS 3205 (Free Alkali - For Grade 2) |
- |
|
|
|
| 3.2, Table 1 and Appendix A-7 of IS 3205 (Water Soluble Sulphide ( as BaS ) -For Grade 1) |
- |
|
|
|
| 3.2, Table 1 and Appendix A-7 of IS 3205 (Water Soluble Sulphide ( as BaS ) -For Grade 2) |
- |
|
|
|
| 3.2, Table 1 and Appendix A-8 of IS 3205 (Total Sulphur ( as SO4 ) - For Grade 1) |
- |
|
|
|
| 3.2, Table 1 and Appendix A-9 of IS 3205 (Alkali and other metasulphates ( as BaSO4 ) - For Grade 1 ) |
- |
|
|
|
| 3.2, Table 1 and Appendix A-9 of IS 3205 (Alkali and other metasulphates ( as BaSO4 ) - For Grade 2) |
- |
|
|
|
| 3.2, Table 1 and Appendix A-10 of IS 3205 (Sodium Oxides ( as NaO2 ) - For Grade 1) |
- |
|
|
|
| 3.2, Table 1 and Appendix A-11 of IS 3205 (Iron ( as Fe2O3) - For Grade 1) |
- |
|
|
|
| 3.2, Table 1 and Appendix A-11 of IS 3205 (Iron ( as Fe2O3) - For Grade 2) |
- |
|
|
|
| 3.2, Table 1 and Appendix A-14 of IS 3205 (Reaction efficiency ( after 45 minutes ) - For Grade 2) |
- |
|
|
|
|
- |
-
" 500 g "
Excluding except carbonates for all grades, residue retained on 63 microns IS sieve for grade 1 |
| 10564 |
BIS, Central Laboratory (CL)
| IS 9798 (2013) |
Low pressure regulators for use with liquefied petroleum gas (LPG) - Specification (Second Revision) |
- |
- View breakup
Rs. 14276/- + testing charges as per referred ISS (excluding excess flow valve and strength on inlet connection).
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.2
IS 742 (Material) |
- |
|
|
|
| 4.1.1
IS 2305 (Material) |
- |
|
|
|
| 4.2.1a (Finish) |
- |
|
|
|
| 4.2.1b
IS 9844
IS 6009 (Finish) |
- |
|
|
|
| 4.3.1 (Diaphragm Material) |
- |
|
|
|
| 4.3.2
IS 3400(Part 4) (The material shall not show change of more than 10 IRHD when subjected to ageing of 72 h at 70°C in accordance with the method prescribed in 3 or 4 of IS 3400 (Part 4)) |
- |
|
|
|
| 4.3.3 (Clamping test) |
- |
|
|
|
| 4.3.4
Annex C (Bursting & Pull out test) |
- |
|
|
|
| 4.3.5ai
Annex D (The material shall, after immersion in n-pentane or octet commercial LPG for 72 h, meet the appropriate requirements specified in Annex D
Diaphragm: Extractable
) |
- |
|
|
|
| 4.3.5b
IS 3400(Part 2) (Changes in hardness, before and after the immersion ) |
- |
|
|
|
| 4.3.7
Annex E (The material shall have 25 percent max compression set when subjected to compression set test in accordance with the method prescribed in Annex E.) |
- |
|
|
|
| 4.4.1 (Valve Pad Material) |
- |
|
|
|
| 4.4.2ai
Annex D (The material shall, after immersion in n-pentane or octet commercial LPG for 72 h, meet the appropriate requirements specified in Annex D
Extractable
) |
- |
|
|
|
| 4.4.2aii
Annex D ( Absorbed) |
- |
|
|
|
| 4.4.2b
IS 3400(Part 2) (Changes in hardness, before and after the test) |
- |
|
|
|
| 4.4.3
IS 3400(Part 4) (The material shall not show change of more than 10 IRHD when subjected to ageing of 72 h at 70°C in accordance with the method prescribed in 3 or 4 of IS 3400 (Part 4)) |
- |
|
|
|
| 4.4.4 (Valve Pad Material) |
- |
|
|
|
| 4.4.5
Annex E (The material shall have 40 percent max compression set when subjected to compression set test in accordance with the method prescribed in Annex E.) |
- |
|
|
|
| 4.5,4.4.1 (Seals
O rings and rubber components other than diaphragm
and valve pad ) |
- |
|
|
|
| 4.5,4.4.2i
Annex D (The material shall, after immersion in n-pentane or octet commercial LPG for 72 h, meet the appropriate requirements specified in Annex D
Extractable
) |
- |
|
|
|
| 4.5,4.4.2ii
Annex D ( Absorbed) |
- |
|
|
|
| 4.5,4.4.2b
IS 3400(Part 2) (Changes in hardness, before and after the test) |
- |
|
|
|
| 4.5,4.4.3
IS 3400(Part 4) (The material shall not show change of more than 10 IRHD when subjected to ageing of 72 h at 70°C in accordance with the method prescribed in 3 or 4 of IS 3400 (Part 4)) |
- |
|
|
|
| 4.5,4.4.5
Annex E (The material shall have 40 percent max compression set when subjected to compression set test in accordance with the method prescribed in Annex E.) |
- |
|
|
|
| 4.5,4.4.1 (Seals
O rings and rubber components other than diaphragm
and valve pad ) |
- |
|
|
|
| 4.5,4.4.2i
Annex D (The material shall, after immersion in n-pentane or octet commercial LPG for 72 h, meet the appropriate requirements specified in Annex D
Extractable
) |
- |
|
|
|
| 4.5,4.4.2ii
Annex D ( Absorbed) |
- |
|
|
|
| 4.5,4.4.2b
IS 3400(Part 2) (Changes in hardness, before and after the test) |
- |
|
|
|
| 4.5,4.4.3
IS 3400(Part 4) (The material shall not show change of more than 10 IRHD when subjected to ageing of 72 h at 70°C in accordance with the method prescribed in 3 or 4 of IS 3400 (Part 4)) |
- |
|
|
|
| 4.5,4.4.5
Annex E (The material shall have 40 percent max compression set when subjected to compression set test in accordance with the method prescribed in Annex E.) |
- |
|
|
|
| 4.5,4.4.1 (Seals
O rings and rubber components other than diaphragm
and valve pad ) |
- |
|
|
|
| 4.5,4.4.2i
Annex D (The material shall, after immersion in n-pentane or octet commercial LPG for 72 h, meet the appropriate requirements specified in Annex D
Extractable
) |
- |
|
|
|
| 4.5,4.4.2ii
Annex D ( Absorbed) |
- |
|
|
|
| 4.5,4.4.2b
IS 3400(Part 2) (Changes in hardness, before and after the test) |
- |
|
|
|
| 4.5,4.4.3
IS 3400(Part 4) (The material shall not show change of more than 10 IRHD when subjected to ageing of 72 h at 70°C in accordance with the method prescribed in 3 or 4 of IS 3400 (Part 4)) |
- |
|
|
|
| 4.5,4.4.5
Annex E (The material shall have 40 percent max compression set when subjected to compression set test in accordance with the method prescribed in Annex E.) |
- |
|
|
|
| 5.2 (Construction and Workmanship) |
- |
|
|
|
| 5.5 (Inlet Connection) |
- |
|
|
|
| 5.5 (Inlet Connection) |
- |
|
|
|
| 5.5 (Inlet Connection) |
- |
|
|
|
| 5.6,5.6.1 (Outlet Connection:-
Non-threaded Outlet Connection) |
- |
|
|
|
| 5.7 (Body) |
- |
|
|
|
| 5.8 (Vent) |
- |
|
|
|
| 5.10.1 (Valve Pad Fitting) |
- |
|
|
|
| 5.11.1,8.11
Table 1 (The fixing of the inlet connection on to the regulator body , whether it is of the threaded or non - threaded type or in one piece, shall withstand the following tests, under the conditions defined in 8.11 (see Table 1)) |
- |
|
|
|
| 5.11.1,8.11
Table 1 (The fixing of the inlet connection on to the regulator body , whether it is of the threaded or non - threaded type or in one piece, shall withstand the following tests, under the conditions defined in 8.11 (see Table 1)) |
- |
|
|
|
| 5.12.1,8.11
Table 3 (The regulators when installed as indicated in the installation instruction shall resist the following tests under the conditions defined in 8.11 (see Table 3 )) |
- |
|
|
|
| 5.11.2a,8.11
Table 2 (The fixing of the outlet connection on to the regulator body, whether it is of the threaded, or non-threaded type or in one piece, shall resist the following tests, under the conditions defined in 8.11 (see Table 2):a)For non - threaded hose connection) |
- |
|
|
|
| 5.11.2b,8.11
Table 2 (The fixing of the outlet connection on to the regulator body, whether it is of the threaded, or non-threaded type or in one piece, shall resist the following tests, under the conditions defined in 8.11 (see Table 2):b)For threaded unions) |
- |
|
|
|
| 6,6.1,6.2 (SOUNDNESS) |
- |
|
|
|
| 6,6.1,6.2 (SOUNDNESS) |
- |
|
|
|
| 6.3 (SOUNDNESS) |
- |
|
|
|
| 6.4 (SOUNDNESS) |
- |
|
|
|
| 8.2 (CHATTER) |
- |
|
|
|
| 8.9 (Performance
(Before Cycle test, Low Temp. Test and High Temp. Test)
Inlet Pressure Flow Rate
) |
- |
|
|
|
| 8.9 (0.5 kgf/cm2 100 % ) |
- |
|
|
|
| 8.9 (17 kgf/cm2 10 % ) |
- |
|
|
|
| 8.9 (Static(lock up) pressure) |
- |
|
|
|
| 8.9 (Performance
(Before Cycle test, Low Temp. Test and High Temp. Test)
Inlet Pressure Flow Rate
) |
- |
|
|
|
| 8.10.1
Annex G (Cycle Test) |
- |
|
|
|
| 6,6.1,6.2 (SOUNDNESS
(After Cycle Test)) |
- |
|
|
|
| 8.9 (Performance
(After Cycle test)
Inlet Pressure Flow Rate
) |
- |
|
|
|
| 8.10.2
Annex H
8.9 (Low Temperature Test
Performance test after exposure to
temperature at -200 C for 10 Min and back
to ambient condition.
Inlet Pressure Flow Rate) |
- |
|
|
|
| 8.9 (Static(lock up) pressure) |
- |
|
|
|
| 8.10.3
Annex H
8.9 (High Temperature Test
Performance test after exposure to
temperature at 650 C for 10 Min and back
to ambient condition.
Inlet Pressure Flow Rate) |
- |
|
|
|
| 8.9 (0.5 kgf/cm2 100 % ) |
- |
|
|
|
| 8.9 (17 kgf/cm2 10 % ) |
- |
|
|
|
| 8.9 (Static(lock up) pressure) |
- |
|
|
|
| 4.4.5
Annex E (The material shall have 40 percent max compression set when subjected to compression set test in accordance with the method prescribed in Annex E.) |
- |
|
|
|
| Cl. 4.2 (Aluminium) |
- |
|
|
|
| Cl. 4.2 (Copper) |
- |
|
|
|
| Cl. 4.2 (Magnesium) |
- |
|
|
|
| Cl. 4.2 (Iron) |
- |
|
|
|
| Cl. 4.2 (Lead) |
- |
|
|
|
| Cl. 4.2 (Cadmium) |
- |
|
|
|
| Cl. 4.2 (Tin) |
- |
|
|
|
| Cl. 4.2 (Thalium+ Indium) |
- |
|
|
|
| Cl. 4.2 (Nickel) |
- |
|
|
|
| Cl. 4.2 (Zinc) |
- |
|
|
|
| Cl. 4.2 (Chromium) |
- |
|
|
|
|
- |
-
- |
| 10565 |
BIS, Southern Regional Laboratory (SRL)
| IS 11587 (1986) |
Specification for structural weather resistant steels |
- |
- View breakup
Rs 5600/- (rounded off to nearest Rs 50/-) Chemical parameters in Table 1 is Rs. 8600/- (rounded off to nearest 50/-).
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 4 (Grades) |
- |
|
|
|
| Cl 8 (Tensile Test) |
- |
|
|
|
| Cl 10 (Impact Test) |
- |
|
|
|
| Cl 11 (Flattening Test) |
- |
|
|
|
| Cl 12 (Freedom from Defects) |
- |
|
|
|
| Cl 13 (Dimensions) |
- |
|
|
|
| Cl 16 (Mass) |
- |
|
|
|
| Cl 13 (Dimensions) |
- |
|
|
|
| Cl 16 (Mass) |
- |
|
|
|
|
- |
-
" 1 m
Excluding except chemical tests (Prepared test pieces are required for Impact test) |
| 10566 |
BIS, Central Laboratory (CL)
| IS 1554 : Part 1 (1988) |
Specification for pvc insulated (Heavy Duty) electric cables: Part 1 for working voltages up to and including 1100 v (Third Revision) |
- |
- View breakup
Rs.16650/- for single core unarmoured cable, Rs.22500/- for two core, unarmoured cable, Rs.26700/- for two core armoured cable (Excluding addl. Type test for cables with improved fire performance.) For multi core cables, extra charges @ 35 % for each additional core shall be levied. Material testing charges as per relevant referred ISs Testing charges for Additional Type Tests for Improved Fire Performance Tests: Rs. 7100/- for category C1 Rs. 11700/- for category C2
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.1 (MATERIALS : CONDUCTOR) |
- |
|
|
|
| 4.1.1 (INSULATION : General Purjose Insulaiion) |
- |
|
|
|
| 4.1.2 (INSULATION : Heat Resisting Insulation) |
- |
|
|
|
| 5.1 (MATERIALS : FILLER AND INNER SHEATH) |
- |
|
|
|
| 6.1 (MATERIALS : ARMGURING) |
- |
|
|
|
| 7.1.1 (OUTER SHEATH : For Cables with General Purpose InsuIafion) |
- |
|
|
|
| 7.1.2 (OUTER SHEATH : For Cables with Heat Resisting InsuIalion) |
- |
|
|
|
| 8.1 (CONSTRUCTION : CONDUCTOR) |
- |
|
|
|
| 8.2 (CONSTRUCTION : CONDUCTOR) |
- |
|
|
|
| 9.2 (INSULATION : Thickness of Insulation) |
- |
|
|
|
| 9.4 (INSULATION : Application of Insulation) |
- |
|
|
|
| 10.1 (CORE IDENTIFICATION) |
- |
|
|
|
| 10.2 (CORE IDENTIFICATION) |
- |
|
|
|
| 10.3 (CORE IDENTIFICATION) |
- |
|
|
|
| 10.3.1 (Arrangement of Marking) |
- |
|
|
|
| 11.1 (LAYING UP OF CORES) |
- |
|
|
|
| 12.1 (INNER SHEATH) |
- |
|
|
|
| 12.2 (INNER SHEATH) |
- |
|
|
|
| 12.3 (INNER SHEATH :Thickness of Inner Sheath) |
- |
|
|
|
| 13.1.1 (ARMOURING : Application) |
- |
|
|
|
| 13.1.2 (Armouring: Coverage ) |
- |
|
|
|
| 13.1.3 (ARMOURING : Direction of lay ) |
- |
|
|
|
| 13.2 (ARMOURING : Type of Armour) |
- |
|
|
|
| 13.3 (Armouring : Dimensions -Wire Diameter) |
- |
|
|
|
| 13.3 (Armouring : Dimensions -Formed wire ) |
- |
|
|
|
| 13.4 (ARMOURING : Joints) |
- |
|
|
|
| 13.5.1 (ARMOURING : Resistance) |
- |
|
|
|
| 13.5.2 (ARMOURING : Resistance) |
- |
|
|
|
| 13.6 a) (ARMOURING: Tensile Strength) |
- |
|
|
|
| 13.6 b) (ARMOURING: Elongation ) |
- |
|
|
|
| 13.6 f) (ARMOURING: Mass of zinc coating ) |
- |
|
|
|
| 13.6 g) (ARMOURING: Resistivity) |
- |
|
|
|
| 14.1 (OUTER SHEATH) |
- |
|
|
|
| 14.3 (OUTER SHEATH : Colour ) |
- |
|
|
|
| 14.4.1 (Thickness of Outer Sheath : Unarmowed Cables) |
- |
|
|
|
| 14.4.2 (Thickness of Outer Sheath : Armoured Cables) |
- |
|
|
|
| 15.1 a) 1) (Tests on conductor : Annealing test ( for copper )) |
- |
|
|
|
| 15.1 a) 2) (Tensile test (for aluminium) - Before stranding ) |
- |
|
|
|
| 15.1 a) 2) (Tensile test (for aluminium) - After stranding ) |
- |
|
|
|
| 15.1 a) 3) (Tests on conductor : Wrapping test ( for aluminium )) |
- |
|
|
|
| 15.1 a) 4) (Tests on conductor : Conductor resistance test) |
- |
|
|
|
| 15.1 a) 4) (Resistance test - Neutral conductor ) |
- |
|
|
|
| 15.1 d)1) (Phyaical tests for insulation : Tensile Test) |
- |
|
|
|
| 15.1 d)1) (Phyaical tests for insulation : Elongation ) |
- |
|
|
|
| 15.1 d)1) (Physical tests for sheath : Tensile stregth ) |
- |
|
|
|
| 15.1 d)1) (Physical tests for sheath : Elongation ) |
- |
|
|
|
| 15.1 d)2) (Phyaical tests for insulation- Ageing in air Oven : Tensile Test) |
- |
|
|
|
| 15.1 d)2) (Phyaical tests for insulation - Ageing in air Oven : Tensile Variation ) |
- |
|
|
|
| 15.1 d)2) (Phyaical tests for insulation - Ageing in air oven : Elongation ) |
- |
|
|
|
| 15.1 d)2) (Phyaical tests for insulation- Ageing in air oven : Elongation Variation ) |
- |
|
|
|
| 15.1 d)2) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth ) |
- |
|
|
|
| 15.1 d)2) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation ) |
- |
|
|
|
| 15.1 d)2) (Physical tests for outer sheath -Ageing in air oven : Elongation Variation ) |
- |
|
|
|
| 15.1 d)5) ( Loss of mass in air oven- Insulation ) |
- |
|
|
|
| 15.1 d)5) ( Loss of mass in air oven- sheath ) |
- |
|
|
|
| 15.1 d)3) (Phyaical tests for insulation : Shrinkage ) |
- |
|
|
|
| 15.1 d)3) (Phyaical tests for insulation : Shrinkage - Crack observed ) |
- |
|
|
|
| 15.1 d)3) (Phyaical tests for Sheath : Shrinkage ) |
- |
|
|
|
| 15.1 d)3) (Phyaical tests for Sheath : Shrinkage - Crack observed ) |
- |
|
|
|
| 15.1 d)4) (Hot deformation : Insulation ) |
- |
|
|
|
| 15.1 d)4) (Hot deformation : Sheath ) |
- |
|
|
|
| 15.1 d)6) (Heat shock test- Insulation ) |
- |
|
|
|
| 15.1 d)6) (Heat shock test- sheath ) |
- |
|
|
|
| 15.1 d)7) (Thermal stability- insulation ) |
- |
|
|
|
| 15.1 d)7) (Thermal stability- Sheath ) |
- |
|
|
|
| 15.1 e) (Insulation resistance test : Volume Resistivity ) |
- |
|
|
|
| 15.1 e) (Insulation resistance test : IR Constant ) |
- |
|
|
|
| 15.1 f) (High voltage test ( water immersion test )) |
- |
|
|
|
| 15.1 g) (High voltage test at room temperature) |
- |
|
|
|
| 16.4 (Flammability Test) |
- |
|
|
|
| 15.4 a) (Cold bend test- Insulation ( Optional test)) |
- |
|
|
|
| 15.4 a) (Cold bend test- Sheath ( Optional test)) |
- |
|
|
|
| 15.4 b) (Cold impact test- Insulation ( Optional test)) |
- |
|
|
|
| 15.4 b) (Cold impact test- Sheath ( Optional test)) |
- |
|
|
|
| 15.4 c) (Armour resistance test ( for other than mining cables ).- Optional test ) |
- |
|
|
|
| 17.1 (IDENTIFICATION : Manufacturer’s Identification) |
- |
|
|
|
| 17.2 (IDENTIFICATION : Cable Identification) |
- |
|
|
|
| 17.3 (IDENTIFICATION : Cable Code) |
- |
|
|
|
| 13.6 c) (ARMOURING: Torsion Test (For round wire ) ) |
- |
|
|
|
| 13.6 d) (ARMOURING: Winding Test(For formed wire)) |
- |
|
|
|
| 13.6 e) (ARMOURING: Uniformity of zinc coating) |
- |
|
|
|
| Cl.8 (Conductor, Number of wires.) |
- |
|
|
|
| Cl.8 (Conductor, Number of wires.) |
- |
|
|
|
| Cl.8 (Flexibility class) |
- |
|
|
|
| [(Cl.15), (d), 2] (After ageing, Elongation of Sheath [Percentage]) |
- |
|
|
|
|
- |
-
Except Cat C1 & C2 |
| 10567 |
BIS, Central Laboratory (CL)
| IS 2062 (2011) |
Hot rolled medium and high tensile structural steel - Specification (Seventh Revision) |
- |
- View breakup
Rs. 8100/- Excluding Impact and Y-Groove crackability Test
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 18 (Weight) |
- |
|
|
|
| Cl 15 (Length, Width & Thickness) |
- |
|
|
|
| Cl 10.3 (UTM) |
- |
|
|
|
| Cl 7 (Workmanship) |
- |
|
|
|
| Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650) (Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650) (Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650) (Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650) (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650) (Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| Clause - 5, 8.1 & 8.2 (E250, ALUMINIUM) |
- |
|
|
|
| Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650) (Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650) (Carbon Equivalent- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
|
- |
-
Grade/Designation, Quality type of killing and declaration regarding micro alloying elements addition may please be declared. Sample size- 5 pcs of 5 cm x 5 cm having dia> 3mm and thickness >0.8 mm;
Excluding -; Y-groove crackability test |
| 10568 |
BIS, Bengaluru Branch Laboratory (BNBL)
| IS 10086 (1982) |
Specificaton for moulds for use in tests of cement and concrete |
- |
Rs 14700/- and Material testing charges as per relevan View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 5.1 (Construction) |
- |
|
|
|
| Cl 5.3 (Arangement for fastening / Clamping) |
- |
|
|
|
|
- |
-
Test facility not available for Material Testing |
| 10569 |
BIS, Northern Regional Laboratory (NRL)
| IS 1554 : Part 1 (1988) |
Specification for pvc insulated (Heavy Duty) electric cables: Part 1 for working voltages up to and including 1100 v (Third Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.1 (MATERIALS : CONDUCTOR) |
- |
|
|
|
| 4.1.1 (INSULATION : General Purjose Insulaiion) |
- |
|
|
|
| 4.1.2 (INSULATION : Heat Resisting Insulation) |
- |
|
|
|
| 5.1 (MATERIALS : FILLER AND INNER SHEATH) |
- |
|
|
|
| 5.2 (MATERIALS : FILLER AND INNER SHEATH) |
- |
|
|
|
| 6.1 (MATERIALS : ARMGURING) |
- |
|
|
|
| 6.2 (MATERIALS : ARMGURING) |
- |
|
|
|
| 7.1.1 (OUTER SHEATH : For Cables with General Purpose InsuIafion) |
- |
|
|
|
| 7.1.2 (OUTER SHEATH : For Cables with Heat Resisting InsuIalion) |
- |
|
|
|
| 8.1 (CONSTRUCTION : CONDUCTOR) |
- |
|
|
|
| 8.2 (CONSTRUCTION : CONDUCTOR) |
- |
|
|
|
| 9.1 (INSULATION ) |
- |
|
|
|
| 9.2 (INSULATION : Thickness of Insulation) |
- |
|
|
|
| 9.3 (INSULATION :Tolerance on Thickness of Insulation) |
- |
|
|
|
| 9.4 (INSULATION : Application of Insulation) |
- |
|
|
|
| 10.1 (CORE IDENTIFICATION) |
- |
|
|
|
| 10.2 (CORE IDENTIFICATION) |
- |
|
|
|
| 10.3 (CORE IDENTIFICATION) |
- |
|
|
|
| 10.3.1 (Arrangement of Marking) |
- |
|
|
|
| 11.1 (LAYING UP OF CORES) |
- |
|
|
|
| 11.2 (LAYING UP OF CORES) |
- |
|
|
|
| 12.1 (INNER SHEATH) |
- |
|
|
|
| 12.2 (INNER SHEATH) |
- |
|
|
|
| 12.3 (INNER SHEATH :Thickness of Inner Sheath) |
- |
|
|
|
| 12.3.1 (INNER SHEATH :Thickness of Inner Sheath) |
- |
|
|
|
| 13.1.1 (ARMOURING : Application) |
- |
|
|
|
| 13.1.2 (Armouring: Coverage ) |
- |
|
|
|
| 13.1.3 (ARMOURING : Direction of lay ) |
- |
|
|
|
| 13.2 (ARMOURING : Type of Armour) |
- |
|
|
|
| 13.1.4 (ARMOURING : Application) |
- |
|
|
|
| 13.2.1 (ARMOURING : Type of Armour) |
- |
|
|
|
| 13.3 (Armouring : Dimensions -Wire Diameter) |
- |
|
|
|
| 13.3 (Armouring : Dimensions -Formed wire ) |
- |
|
|
|
| 13.4 (ARMOURING : Joints) |
- |
|
|
|
| 13.5.1 (ARMOURING : Resistance) |
- |
|
|
|
| 13.5.2 (ARMOURING : Resistance) |
- |
|
|
|
| 13.6 a) (ARMOURING: Tensile Strength) |
- |
|
|
|
| 13.6 b) (ARMOURING: Elongation ) |
- |
|
|
|
| 13.6 c) (ARMOURING: Torsion Test (For round wire ) ) |
- |
|
|
|
| 13.6 d) (ARMOURING: Winding Test(For formed wire)) |
- |
|
|
|
| 13.6 e) (ARMOURING: Uniformity of zinc coating) |
- |
|
|
|
| 13.6 f) (ARMOURING: Mass of zinc coating ) |
- |
|
|
|
| 13.6 g) (ARMOURING: Resistivity) |
- |
|
|
|
| 14.1 (OUTER SHEATH) |
- |
|
|
|
| 14.2 (OUTER SHEATH) |
- |
|
|
|
| 14.3 (OUTER SHEATH : Colour ) |
- |
|
|
|
| 14.4.1 (Thickness of Outer Sheath : Unarmowed Cables) |
- |
|
|
|
| 14.4.2 (Thickness of Outer Sheath : Armoured Cables) |
- |
|
|
|
| 15.1 a) 1) (Tests on conductor : Annealing test ( for copper )) |
- |
|
|
|
| 15.1 a) 2) (Tensile test (for aluminium) - Before stranding ) |
- |
|
|
|
| 15.1 a) 2) (Tensile test (for aluminium) - After stranding ) |
- |
|
|
|
| 15.1 a) 3) (Tests on conductor : Wrapping test ( for aluminium )) |
- |
|
|
|
| 15.1 a) 4) (Tests on conductor : Conductor resistance test) |
- |
|
|
|
| 15.1 a) 4) (Resistance test - Neutral conductor ) |
- |
|
|
|
| 15.1 d)1) (Phyaical tests for insulation : Tensile Test) |
- |
|
|
|
| 15.1 d)1) (Phyaical tests for insulation : Elongation ) |
- |
|
|
|
| 15.1 d)1) (Physical tests for sheath : Tensile stregth ) |
- |
|
|
|
| 15.1 d)1) (Physical tests for sheath : Elongation ) |
- |
|
|
|
| 15.1 d)2) (Phyaical tests for insulation- Ageing in air Oven : Tensile Test) |
- |
|
|
|
| 15.1 d)2) (Phyaical tests for insulation - Ageing in air oven : Elongation ) |
- |
|
|
|
| 15.1 d)2) (Phyaical tests for insulation - Ageing in air Oven : Tensile Variation ) |
- |
|
|
|
| 15.1 d)2) (Phyaical tests for insulation- Ageing in air oven : Elongation Variation ) |
- |
|
|
|
| 15.1 d)2) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth ) |
- |
|
|
|
| 15.1 d)2) (Physical tests for outer sheath -Ageing in air oven : Elongation ) |
- |
|
|
|
| 15.1 d)2) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation ) |
- |
|
|
|
| 15.1 d)2) (Physical tests for outer sheath -Ageing in air oven : Elongation Variation ) |
- |
|
|
|
| 15.1 d)3) (Phyaical tests for insulation : Shrinkage ) |
- |
|
|
|
| 15.1 d)3) (Phyaical tests for insulation : Shrinkage - Crack observed ) |
- |
|
|
|
| 15.1 d)3) (Phyaical tests for Sheath : Shrinkage ) |
- |
|
|
|
| 15.1 d)3) (Phyaical tests for Sheath : Shrinkage - Crack observed ) |
- |
|
|
|
| 15.1 d)4) (Hot deformation : Insulation ) |
- |
|
|
|
| 15.1 d)4) (Hot deformation : Sheath ) |
- |
|
|
|
| 15.1 d)5) ( Loss of mass in air oven- Insulation ) |
- |
|
|
|
| 15.1 d)5) ( Loss of mass in air oven- sheath ) |
- |
|
|
|
| 15.1 d)5) ( Loss of mass in air oven- Insulation ) |
- |
|
|
|
| 15.1 d)5) ( Loss of mass in air oven- sheath ) |
- |
|
|
|
| 15.1 d)6) (Heat shock test- Insulation ) |
- |
|
|
|
| 15.1 d)6) (Heat shock test- sheath ) |
- |
|
|
|
| 15.1 d)7) (Thermal stability- insulation ) |
- |
|
|
|
| 15.1 d)7) (Thermal stability- Sheath ) |
- |
|
|
|
| 15.1 e) (Insulation resistance test : Volume Resistivity ) |
- |
|
|
|
| 15.1 e) (Insulation resistance test : IR Constant ) |
- |
|
|
|
| 15.1 f) (High voltage test ( water immersion test )) |
- |
|
|
|
| 15.1 g) (High voltage test at room temperature) |
- |
|
|
|
| 15.1 f) (High voltage test ( water immersion test )) |
- |
|
|
|
| 15.1 g) (High voltage test at room temperature) |
- |
|
|
|
| 15.1 g) (High voltage test at room temperature) |
- |
|
|
|
| 15.4 a) (Cold bend test- Insulation ( Optional test)) |
- |
|
|
|
| 15.4 a) (Cold bend test- Sheath ( Optional test)) |
- |
|
|
|
| 15.4 b) (Cold impact test- Insulation ( Optional test)) |
- |
|
|
|
| 15.4 b) (Cold impact test- Sheath ( Optional test)) |
- |
|
|
|
| 15.4 c) (Armour resistance test ( for other than mining cables ).- Optional test ) |
- |
|
|
|
| 16.1 (DETAILS OF TESTS : General) |
- |
|
|
|
| 16.2 (DETAILS OF TESTS : High Voltage Test at Room Temperature) |
- |
|
|
|
| 16.3.1 (High Voltage Test ( Water Immersion Test ) : a.c. Test) |
- |
|
|
|
| 16.3.2 (High Voltage Test ( Water Immersion Test ) : d.c. Test) |
- |
|
|
|
| 16.4 (Flammability Test) |
- |
|
|
|
| 16.5 (Oxygen Index Test) |
- |
|
|
|
| 16.6 (Flame Retardance Test on Single Cables) |
- |
|
|
|
| 16.7 (Flame Retardance Test on Bunched Cables) |
- |
|
|
|
| 16.1 (Temperature Index) |
- |
|
|
|
| 16.5 (Oxygen Index Test) |
- |
|
|
|
| 16.1 (Temperature Index) |
- |
|
|
|
| 17.1 (IDENTIFICATION : Manufacturer’s Identification) |
- |
|
|
|
| 17.2 (IDENTIFICATION : Cable Identification) |
- |
|
|
|
| 17.2.1 (IDENTIFICATION : Cable Identification) |
- |
|
|
|
| 17.3 (IDENTIFICATION : Cable Code) |
- |
|
|
|
| 16.9 (Test for Halogen Acid Gas Evolution) |
- |
|
|
|
|
- |
-
Test facility is complete |
| 10570 |
BIS, Southern Regional Laboratory (SRL)
| IS 398 : Part 1 (1996) |
Aluminium conductors for overhead transmission purposes - Specification: Part 1 aluminium stranded conductors (Third Revision) |
AAAC |
Rs.1600/- for 7 strands, Rs.3750/- for 19 strands View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 12.2, Table-1 (Measurement of diameter of individual aluminium wire) |
- |
|
|
|
| 12.3, Table-1 (Breaking load before stranding) |
- |
|
|
|
| 12.3, Table-1 (Breaking load after stranding) |
- |
|
|
|
| 12.4 (Wrapping test) |
- |
|
|
|
| 12.5, Table 1 (Resistance test) |
- |
|
|
|
| 12.6, Table 3 (Measurement of lay ratio) |
- |
|
|
|
| 9.3 (Stranding) |
- |
|
|
|
| 6 (Freedom from defects) |
- |
|
|
|
|
- |
-
" 5 m " |
| 10571 |
BIS, Northern Regional Laboratory (NRL)
| IS 1239 : Part 1 (2004) |
Steel tubes, tubulars and other wrought steel fittings - Specification: Part 1 steel tubes (Sixth Revision) |
- |
Rs. 9200/- Excluding test on joints View breakup
Rs. 9200/- Excluding test on joints
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 8 (Outer Diameter, Thickness & Mass) |
- |
|
|
|
| Cl 14 (Tensile Test, Flattening Test & Bend Test) |
- |
|
|
|
| Cl 10.1 (Manufacturing ) |
- |
|
|
|
| Cl 10.1.1 (Manufacturing ) |
- |
|
|
|
| Cl 12 (Workmanship) |
- |
|
|
|
| Cl 15 (Workmanship) |
- |
|
|
|
| 7, 6.1.1 (CARBON) |
- |
|
|
|
| 7, 6.1.1 (SULPHUR) |
- |
|
|
|
| 7, 6.1.1 (PHOSPHURS) |
- |
|
|
|
| 7, 6.1.1 (SILICON) |
- |
|
|
|
| 7, 6.1.1 (NITROGEN) |
- |
|
|
|
| 7, 6.1.1 (ALUMINIUM) |
- |
|
|
|
|
- |
-
Except Microalloying Elements |
| 10572 |
BIS, Northern Regional Laboratory (NRL)
| IS 1161 (2014) |
Steel tubes for structural purposes - Specification (Fifth Revision) |
- |
- View breakup
Rs. 5725/- and material testing charges as per relevant referred Iss
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 7 (Workmanship) |
- |
|
|
|
| Cl 8 (Workmanship) |
- |
|
|
|
| Cl 9 (Workmanship) |
- |
|
|
|
| Cl 13 (Workmanship) |
- |
|
|
|
| Clause - 5.1, Table-3 ( CARBON) |
- |
|
|
|
| Clause - 5.1, Table-3 (SULPHUR) |
- |
|
|
|
| Clause - 5.1, Table-3 (SILICON) |
- |
|
|
|
| Clause - 5.1, Table-3 (MANGANESE) |
- |
|
|
|
| Clause - 5.1, Table-3 (PHOSPHURS) |
- |
|
|
|
| Clause - 5.1, Table-3 (NITROGEN) |
- |
|
|
|
| 8 AND AS PER IS 4736 (MASS OF ZINC COATING) |
- |
|
|
|
| 8 AND AS PER IS 4736 (UNIFORMITY OF ZINC COATING) |
- |
|
|
|
| Cl. 11.2 Table 2 (Yield strength) |
- |
|
|
|
| 3.1 & 6.1, 6.1.1 & 6.1.3 , Table 1 (Outer Diameter - SOP MT-23) |
- |
|
|
|
| Cl. 6 , 6.2 Table 1 (Weight) |
- |
|
|
|
| Cl. 6 , 6.2 Table 1 (Thickness) |
- |
|
|
|
| Cl 11.3.1 (Flattening test (over 50 mm NB)) |
- |
|
|
|
| Cl. 11.2 Table 2 (Elongation) |
- |
|
|
|
| Cl 11.3.1 (Cold bend test (upto & including 50 mm NB)) |
- |
|
|
|
| 12 (Marking) |
- |
|
|
|
| 10 (Lengths) |
- |
|
|
|
| Cl 11 (Tensile Test, Flattening Test & Cold Bend Test) |
- |
|
|
|
|
- |
-
Except Microalloying Elements |
| 10573 |
BIS, Northern Regional Laboratory (NRL)
| IS 1879 (2010) |
Malleable cast iron pipe fittings - Specification (Third Revision) |
- |
Rs.7800.00 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6.1 (Tensile Strength - IS 14329) |
- |
|
|
|
| 6.1 (Elongation - Is 14329) |
- |
|
|
|
| 7.2- Table 2 (Wall thickness of fittings - IS 1879) |
- |
|
|
|
| 7.5 - Table 2 (Projection of Rainforcement - IS 1879) |
- |
|
|
|
| 7.5 - Table 3 (Width of Rainforcement - IS 1879) |
- |
|
|
|
| 7.1 - Table 4 to Table 27 (a - IS 1879) |
- |
|
|
|
| 7.1 - Table 4 to Table 27 (b - IS 1879) |
- |
|
|
|
| 7.1 - Table 4 to Table 27 (c- IS 1879) |
- |
|
|
|
| 7.1 - Table 4 to Table 27 (d- IS 1879) |
- |
|
|
|
| 7.1 - Table 28 (d -IS 1879) |
- |
|
|
|
| 8.1 (Thread -IS 554) |
- |
|
|
|
| 8.2 (Alignment of threads -IS 554) |
- |
|
|
|
| 11 (Pressure Test) |
- |
|
|
|
| 5.1.1 (Type of Fittings - IS 1879) |
- |
|
|
|
| 5.1.2 (Size designation - IS 1879) |
- |
|
|
|
| 5.1.2.2 (Unequal fitting -IS 1879) |
- |
|
|
|
| 5.1.3 (Right and Left hand thread - IS 1879) |
- |
|
|
|
| 5.1.1 (Code Number -IS 1879) |
- |
|
|
|
| 10.iv) (Freedom from defects IS 4759) |
- |
|
|
|
| 12 (Compression Test) |
- |
|
|
|
| 10.iii) (Adhesion of Galvanized coating IS 2629) |
- |
|
|
|
| 10.i) (chem) (Mass of Galvanized coating) |
- |
|
|
|
| 10.ii) (chem) (Uniformity of Galvanized coating-IS 2633) |
- |
|
|
|
| 9 (Freedom from defects
) |
- |
|
|
|
| 7.1 - Table 28 (D - IS 1879) |
- |
|
|
|
| 5.1.2.1 (Equal fitting - IS 1879) |
- |
|
|
|
| 10.i) (Mass of Galvanized coating ) |
- |
|
|
|
| 10.ii) (chem) (Uniformity of Galvanized coating-IS 2633) |
- |
|
|
|
|
- |
-
Test facility is complete |
| 10574 |
BIS, Southern Regional Laboratory (SRL)
| IS 398 : Part 4 (1994) |
Aluminium conductors for overhead transmission purposes: Part 4 aluminium alloy stranded conductors (Aluminium - Magnesium - Silicon Type) - Specification (Third Revision) |
AAAC |
Rs 825/- upto 7 wires, Rs 1425/- upto 19 wires View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6.1 (Freedom from Defects) |
- |
|
|
|
| 7.1 Table-1 (Dimensional measurement of wires) |
- |
|
|
|
| 7.2.2 Table-2, Table-4 (Calculated resistance of Stranded Conductor) |
- |
|
|
|
| 8.1 (Joints in wires-Conductors Containing Seven Wires) |
- |
|
|
|
| 8.2 (Joints in wires-Conductors Containing More Than Seven Wires) |
- |
|
|
|
| 9.1 (Stranding) |
- |
|
|
|
| 9.2 Table 3 (Lay Ratio of stranded conductors) |
- |
|
|
|
| 9.3 (Direction of Lay) |
- |
|
|
|
| 9.4 (Multiple layers of wires) |
- |
|
|
|
| 11 (Packing and Marking) |
- |
|
|
|
| 12.2 Table 1 (Breaking Load Test- Before Stranding) |
- |
|
|
|
| 12.2 Table 1 (Breaking Load Test- After Stranding) |
- |
|
|
|
| 12.3 Table 1 (Elongation Test- Before Stranding) |
- |
|
|
|
| 12.3 Table 1 (Elongation Test- After Stranding) |
- |
|
|
|
| 12.3 Table 1 (Elongation Test- Before Stranding) |
- |
|
|
|
| 12.3 Table 1 (Elongation Test- After Stranding) |
- |
|
|
|
| 12.4 Table 1 (Resistance of Aluminium wire) |
- |
|
|
|
| 9.2 Table 3 (Lay Ratio of stranded conductors) |
- |
|
|
|
|
- |
-
5 m |
| 10575 |
BIS, Southern Regional Laboratory (SRL)
| IS 11169 : Part 2 (1989) |
Steels for cold heading/cold extrusion applicationsspecification: Part 2 stainless steels |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7 (FREEDOM FROM DEFECTS) |
- |
|
|
|
| 8.2, table 5 (i) Yield stess/.2% Proof stress, Mpa) |
- |
|
|
|
| 8.2, table 5 (ii)Ultimate Tensile Strength, Mpa) |
- |
|
|
|
| 8.2, table 5 (iii)Elongation, %) |
- |
|
|
|
| 8.2, table 5 (v)Impact strength, J) |
- |
|
|
|
|
- |
-
" mech - 2 x 1 m
Excluding except chemical tests |
| 10576 |
BIS, Southern Regional Laboratory (SRL)
| IS 261 (1982) |
Specification for copper sulphate (Second Revision) |
- |
- View breakup
Rs 2400/- for Tech., Rs 3900/- for Pure
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 1(i) Table 1 (Copper, Tech, A-2) |
- |
|
|
|
| 1(ii) Table 1 (Matter insoluble in water, Tech, A-3) |
- |
|
|
|
| 1(iii) Table 1 (Soluble iron and aluminium compounds ( as Fe ), Tech, A-4) |
- |
|
|
|
| 1(iv) Table 1 (pH value, Tech, A-5) |
- |
|
|
|
| 1(v) Table 1 (Chloride ( as Cl ), Tech, A-6) |
- |
|
|
|
| 1(vi) Table 1 (Arsenic ( as As2O3 ), Tech, A-7) |
- |
|
|
|
| 1(vii) Table 1 (Lead and zinc, Tech, A-8) |
- |
|
|
|
|
- |
-
" 500 g |
| 10577 |
BIS, Northern Regional Laboratory (NRL)
| IS 1165 (2002) |
Milk powder - Specification (First Revision) |
- |
- View breakup
The complete testing charges for the product are Rs.5215x2=Rs.10430.00
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.4.5 (Moisture) |
- |
|
|
|
| 3.4.5 (Total solids) |
- |
|
|
|
| 3.4.5 (Fat) |
- |
|
|
|
| 3.4.5 (Insolubility index) |
- |
|
|
|
| 3.4.5 (Total ash) |
- |
|
|
|
| 3.4.5 (Titratable acidity (lactic acid)) |
- |
|
|
|
| 3.1 (Description) |
- |
|
|
|
| 3.2 (Flavour and Taste) |
- |
|
|
|
| 3.5 (Bacterial count) |
- |
|
|
|
| 3.5.2 (Coliform count) |
- |
|
|
|
| 3.5.3 (Staphylococcus Aureus) |
- |
|
|
|
| 3.5.4 (Salmonella) |
- |
|
|
|
| 3.5.5 (Shigella) |
- |
|
|
|
|
- |
-
Except Table 3 |
| 10578 |
BIS, Northern Regional Laboratory (NRL)
| IS 10325 (2000) |
Square tins - 15 kg/litre for ghee, vanaspati, edible oils and bakery shortenings - Specification (Second Revision) |
- |
- View breakup
Rs.3700/- (excluding Solder testing) and Rs.1500/- for solder testing.
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.2.1 (Material) |
- |
|
|
|
| 4.1 (Dimensions and Tolerances) |
- |
|
|
|
| 4.2.2 (Handle) |
- |
|
|
|
| 4.2.1.1 (Dimensions and Tolerances
) |
- |
|
|
|
| 4.3.4 (Manufacture) |
- |
|
|
|
| 4.3.5 (Handle) |
- |
|
|
|
| 5.1 (Air-Pressure Test) |
- |
|
|
|
| 5.2 (Handle Pull Test) |
- |
|
|
|
| 5.3 (Hydraulic Pressure Test) |
- |
|
|
|
| 4.2.1 (Material) |
- |
|
|
|
| 4.2.1 (Material) |
- |
|
|
|
| 4.3.1 (Manufacture) |
- |
|
|
|
| 4.3.2 (Manufacture) |
- |
|
|
|
| 4.3.3 (Manufacture) |
- |
|
|
|
| 4.3.4 (Manufacture) |
- |
|
|
|
| 4.3.5 (Handle) |
- |
|
|
|
|
- |
-
Except Tin Content |
| 10579 |
BIS, Southern Regional Laboratory (SRL)
| IS 1660 (2009) |
Wrought aluminium utensils - Specification (First Revision) |
- |
Rs 6760/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.1 (Classification Heavy/Medium/L:ight) |
- |
|
|
|
| 5.1 (The utensil shall be pressed or spun from one piece) |
- |
|
|
|
| 5.2 ( Body Thickness of the thinnest part of the finished utensil, mm Not declared ) |
- |
|
|
|
| 6.1 & Table 1 ( i) Name of Utensil ) |
- |
|
|
|
| 6.1 & Table 1 (ii) Shape of Utensil) |
- |
|
|
|
| 6.1 & Table 1 (Inside dia, Φ D mm Not declared ) |
- |
|
|
|
| 6.1 & Table 1 (Height NA) |
- |
|
|
|
| 6.1 & Table 1 (Capacity, l NA) |
- |
|
|
|
| 6.1 ( Minimum sheet thickness for nominal size ) |
- |
|
|
|
| 7.1 (HANDLES ,When fitted shall be of aluminium, stainless steel or of other suitable fire resistance material These shall be fastened to the utensils by tightly drawn aluminium or stainless steel rivets, by welding, by screwing to cast bosses or by riveting between flange at the end of the handles. Handles shall be so shaped and positioned to facilitate the carrying and handling of the utensils in normal use ) |
- |
|
|
|
| 7.2 (Handles shall be sufficiently strong to support a mass in the utensils equivalent to three times the mass of the water capacity of the utensils in the position of normal use without visible permanent deformation of the handle or utensil) |
- |
|
|
|
| 8.1 (The utensils shall be clean reasonably free from distortion, dents, wrinkles, wavy surface, burrs, scratches, pitting and deep tool marks and other surface defects) |
- |
|
|
|
| 8.2 (The design of the utensils shall be such that it is easy to clean and prevent accumulation of dirt) |
- |
|
|
|
| 8.4.1.2 ( Finish of the coating: The coating shall be smooth continuous and uniform in appearance, and shall be adherent. It shall be free from powdery areas, loose films and discontinuities, such as breaks and scratches. The size and number of contact marks shall be minimum consistent with good practice.) |
- |
|
|
|
| 8.4.2 (A coating of thickness 25 to 100 microns is generally required) |
- |
|
|
|
| 8.4.3 (Abrasion Resistance When the coating surface is rubbed two or three times with emery paper with emery conforming to grit number 180 using medium finger pressure, it shall not abrade the surface but shall skid over the surface showing not more than a trace of whitening of the surface) |
- |
|
|
|
| 8.4.4 (The colour of the hard anodic coating varies depending upon the alloy, thickness of the coating and electrolye. Normally the colour may vary from dark grey (almost black) to light grey. ) |
- |
|
|
|
| 8.4.5 (When the coated surface is rubbed two or three times with fine emery paper grit number 180 using medium finger pressure, cloth or paper shall not abrade the surface. A faint trace of whitening on the cloth or paper is permissible) |
- |
|
|
|
| 9 (The manufacturer shall provide full instructions for use and cleaning for coated or hard anodized utensils) |
- |
|
|
|
| 10 (Each vessel shall be legibly and indelibly stamped on the outside surface or handle with the manufacturer’s name or registered trade-mark, size and thickness or class. ) |
- |
|
|
|
|
- |
-
" 2 nos
Excluding Excl. Tests for Non-stick Coating and tests for lunch boxes cl. 8.6.,no chemical tests |
| 10580 |
BIS, Southern Regional Laboratory (SRL)
| IS 6452 (1989) |
High alumina cement for structural use - specification (First Revision) |
- |
Testing charges for the product are: 3,700.00 Testing View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.2 (Fineness
IS 4031(Part 2)) |
- |
|
|
|
| 4.3 (Soundness, Le-Chate1ier expansion
IS 4031(Part 3) ) |
- |
|
|
|
| 4.4 (Setting Time ( by Vicat Apparatus ),Initial
IS 4031(Part 5)) |
- |
|
|
|
| 4.4 (Setting Time ( by Vicat Apparatus ), Final
IS 4031(Part 5)) |
- |
|
|
|
| 4.5 (Compretsive Strenqth .24 hrs ± 30min
IS 4031(Part 6)) |
- |
|
|
|
| 4.5 (Compretsive Strenqth .72 ± 1 hr
IS 4031(Part 6)) |
- |
|
|
|
| 4.1 (Total alumina content (Al2O3) - Cl 4.6 of IS 4032:1985) |
- |
|
|
|
|
- |
-
" 8 kg + 500 g "
Excluding chem facility not available. |
| 10581 |
BIS, Southern Regional Laboratory (SRL)
| IS 1554 : Part 1 (1988) |
Specification for pvc insulated (Heavy Duty) electric cables: Part 1 for working voltages up to and including 1100 v (Third Revision) |
- |
- View breakup
Rs.16650/- for single core unarmoured cable, Rs.22500/- for two core, unarmoured cable, Rs.26700/- for two core armoured cable (Excluding addl. Type test for cables with improved fire performance.) For multi core cables, extra charges @ 35 % for each additional core shall be levied. Material testing charges as per relevant referred ISs Testing charges for Additional Type Tests for Improved Fire Performance Tests: Rs. 7100/- for category C1 Rs. 11700/- for category C2
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.1 (MATERIALS : CONDUCTOR) |
- |
|
|
|
| 4.1.1 (INSULATION : General Purjose Insulaiion) |
- |
|
|
|
| 4.1.2 (INSULATION : Heat Resisting Insulation) |
- |
|
|
|
| 5.1 (MATERIALS : FILLER AND INNER SHEATH) |
- |
|
|
|
| 5.2 (MATERIALS : FILLER AND INNER SHEATH) |
- |
|
|
|
| 6.1 (MATERIALS : ARMGURING) |
- |
|
|
|
| 6.2 (MATERIALS : ARMGURING) |
- |
|
|
|
| 7.1.1 (OUTER SHEATH : For Cables with General Purpose InsuIafion) |
- |
|
|
|
| 7.1.2 (OUTER SHEATH : For Cables with Heat Resisting InsuIalion) |
- |
|
|
|
| 8.1 (CONSTRUCTION : CONDUCTOR) |
- |
|
|
|
| 8.2 (CONSTRUCTION : CONDUCTOR) |
- |
|
|
|
| 9.1 (INSULATION ) |
- |
|
|
|
| 9.2 (INSULATION : Thickness of Insulation) |
- |
|
|
|
| 9.3 (INSULATION :Tolerance on Thickness of Insulation) |
- |
|
|
|
| 9.4 (INSULATION : Application of Insulation) |
- |
|
|
|
| 10.1 (CORE IDENTIFICATION) |
- |
|
|
|
| 10.2 (CORE IDENTIFICATION) |
- |
|
|
|
| 10.3 (CORE IDENTIFICATION) |
- |
|
|
|
| 10.3.1 (Arrangement of Marking) |
- |
|
|
|
| 11.1 (LAYING UP OF CORES) |
- |
|
|
|
| 11.2 (LAYING UP OF CORES) |
- |
|
|
|
| 12.1 (INNER SHEATH) |
- |
|
|
|
| 12.2 (INNER SHEATH) |
- |
|
|
|
| 12.3 (INNER SHEATH :Thickness of Inner Sheath) |
- |
|
|
|
| 12.3.1 (INNER SHEATH :Thickness of Inner Sheath) |
- |
|
|
|
| 13.1.1 (ARMOURING : Application) |
- |
|
|
|
| 13.1.2 (Armouring: Coverage ) |
- |
|
|
|
| 13.1.3 (ARMOURING : Direction of lay ) |
- |
|
|
|
| 13.1.4 (ARMOURING : Application) |
- |
|
|
|
| 13.2 (ARMOURING : Type of Armour) |
- |
|
|
|
| 13.2.1 (ARMOURING : Type of Armour) |
- |
|
|
|
| 13.3 (Armouring : Dimensions -Wire Diameter) |
- |
|
|
|
| 13.3 (Armouring : Dimensions -Formed wire ) |
- |
|
|
|
| 13.4 (ARMOURING : Joints) |
- |
|
|
|
| 13.5.1 (ARMOURING : Resistance) |
- |
|
|
|
| 13.5.2 (ARMOURING : Resistance) |
- |
|
|
|
| 13.6 a) (ARMOURING: Tensile Strength) |
- |
|
|
|
| 13.6 b) (ARMOURING: Elongation ) |
- |
|
|
|
| 13.6 c) (ARMOURING: Torsion Test (For round wire ) ) |
- |
|
|
|
| 13.6 d) (ARMOURING: Winding Test(For formed wire)) |
- |
|
|
|
| 13.6 e) (ARMOURING: Uniformity of zinc coating) |
- |
|
|
|
| 13.6 f) (ARMOURING: Mass of zinc coating ) |
- |
|
|
|
| 13.6 g) (ARMOURING: Resistivity) |
- |
|
|
|
| 14.1 (OUTER SHEATH) |
- |
|
|
|
| 14.2 (OUTER SHEATH) |
- |
|
|
|
| 14.3 (OUTER SHEATH : Colour ) |
- |
|
|
|
| 14.4.1 (Thickness of Outer Sheath : Unarmowed Cables) |
- |
|
|
|
| 14.4.2 (Thickness of Outer Sheath : Armoured Cables) |
- |
|
|
|
| 15.1 a) 1) (Tests on conductor : Annealing test ( for copper )) |
- |
|
|
|
| 15.1 a) 2) (Tensile test (for aluminium) - Before stranding ) |
- |
|
|
|
| 15.1 a) 2) (Tensile test (for aluminium) - After stranding ) |
- |
|
|
|
| 15.1 a) 3) (Tests on conductor : Wrapping test ( for aluminium )) |
- |
|
|
|
| 15.1 a) 4) (Tests on conductor : Conductor resistance test) |
- |
|
|
|
| 15.1 a) 4) (Resistance test - Neutral conductor ) |
- |
|
|
|
| 15.1 d)1) (Phyaical tests for insulation : Tensile Test) |
- |
|
|
|
| 15.1 d)1) (Phyaical tests for insulation : Elongation ) |
- |
|
|
|
| 15.1 d)1) (Physical tests for sheath : Tensile stregth ) |
- |
|
|
|
| 15.1 d)1) (Physical tests for sheath : Elongation ) |
- |
|
|
|
| 15.1 d)2) (Phyaical tests for insulation- Ageing in air Oven : Tensile Test) |
- |
|
|
|
| 15.1 d)2) (Phyaical tests for insulation - Ageing in air oven : Elongation ) |
- |
|
|
|
| 15.1 d)2) (Phyaical tests for insulation - Ageing in air Oven : Tensile Variation ) |
- |
|
|
|
| 15.1 d)2) (Phyaical tests for insulation- Ageing in air oven : Elongation Variation ) |
- |
|
|
|
| 15.1 d)2) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth ) |
- |
|
|
|
| 15.1 d)2) (Physical tests for outer sheath -Ageing in air oven : Elongation ) |
- |
|
|
|
| 15.1 d)2) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation ) |
- |
|
|
|
| 15.1 d)2) (Physical tests for outer sheath -Ageing in air oven : Elongation Variation ) |
- |
|
|
|
| 15.1 d)3) (Phyaical tests for insulation : Shrinkage ) |
- |
|
|
|
| 15.1 d)3) (Phyaical tests for insulation : Shrinkage - Crack observed ) |
- |
|
|
|
| 15.1 d)3) (Phyaical tests for Sheath : Shrinkage ) |
- |
|
|
|
| 15.1 d)3) (Phyaical tests for Sheath : Shrinkage - Crack observed ) |
- |
|
|
|
| 15.1 d)4) (Hot deformation : Insulation ) |
- |
|
|
|
| 15.1 d)4) (Hot deformation : Sheath ) |
- |
|
|
|
| 15.1 d)5) ( Loss of mass in air oven- Insulation ) |
- |
|
|
|
| 15.1 d)5) ( Loss of mass in air oven- sheath ) |
- |
|
|
|
| 15.1 d)6) (Heat shock test- Insulation ) |
- |
|
|
|
| 15.1 d)6) (Heat shock test- sheath ) |
- |
|
|
|
| 15.1 d)7) (Thermal stability- insulation ) |
- |
|
|
|
| 15.1 d)7) (Thermal stability- Sheath ) |
- |
|
|
|
| 15.1 e) (Insulation resistance test : Volume Resistivity ) |
- |
|
|
|
| 15.1 e) (Insulation resistance test : IR Constant ) |
- |
|
|
|
| 15.1 f) (High voltage test ( water immersion test )) |
- |
|
|
|
| 15.1 g) (High voltage test at room temperature) |
- |
|
|
|
| 16.1 (DETAILS OF TESTS : General) |
- |
|
|
|
| 16.2 (DETAILS OF TESTS : High Voltage Test at Room Temperature) |
- |
|
|
|
| 16.3.1 (High Voltage Test ( Water Immersion Test ) : a.c. Test) |
- |
|
|
|
| 16.3.2 (High Voltage Test ( Water Immersion Test ) : d.c. Test) |
- |
|
|
|
| 16.4 (Flammability Test) |
- |
|
|
|
| 17.1 (IDENTIFICATION : Manufacturer’s Identification) |
- |
|
|
|
| 17.2 (IDENTIFICATION : Cable Identification) |
- |
|
|
|
| 17.2.1 (IDENTIFICATION : Cable Identification) |
- |
|
|
|
| 17.3 (IDENTIFICATION : Cable Code) |
- |
|
|
|
| 16.4 (Flammability Test) |
- |
|
|
|
| 13.6 f) (ARMOURING: Mass of zinc coating ) |
- |
|
|
|
|
- |
-
" 15m
Excluding Except improved fire performance test for C1,C2 category(Optional tests) |
| 10582 |
BIS, Southern Regional Laboratory (SRL)
| IS 11536 (2007) |
Processed - Cereal based complementary foods - Specification (Second Revision) |
- |
Rs.29460.00 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4 (Description) |
- |
|
|
|
| 5.7 (Flavour and odour) |
- |
|
|
|
| 5.9 Table 1 i (Moisture) |
- |
|
|
|
| 5.9 Table 1 ii (Total protein) |
- |
|
|
|
| 5.9 Table 1 iii (Total Carbohydrates) |
- |
|
|
|
| 5.9 Table 1 iv (Total Ash) |
- |
|
|
|
| 5.9 Table 1 v (Ash Insoluble in dilute Hydrochloric Acid) |
- |
|
|
|
| 5.9 (Ash Insoluble in dilute HCl Acid) |
- |
|
|
|
| 5.9 Table 1 vi (Iron) |
- |
|
|
|
| 5.9 (Zinc ) |
- |
|
|
|
| 5.9 (Lead) |
- |
|
|
|
| 5.9 (Copper) |
- |
|
|
|
| 5.9 (Arsenic) |
- |
|
|
|
| 5.9 (Tin) |
- |
|
|
|
| 5.9 (Cadmium) |
- |
|
|
|
| 5.8.1 ( Bacterial Count) |
- |
|
|
|
| 5.8.2 (Coliform Count) |
- |
|
|
|
| 5.8.3 (Yeast and Mould count) |
- |
|
|
|
| 5.8.4 (Salmonella) |
- |
|
|
|
| 5.8.4 (Shigella) |
- |
|
|
|
| 5.8.5 (Eseherichia coii) |
- |
|
|
|
| 5.8.6 (Staphylococcus aureus) |
- |
|
|
|
|
- |
-
2X250g
Excluding facility available for only microbiology tests, No chemical tests facility |
| 10583 |
BIS, Eastern Regional Laboratory (ERL)
| IS 15997 (2012) |
Low nickel austenitic stainless steel sheet and strip for utensils and kitchen appliances - Specification |
All types (please see remarks) |
Rs 2850 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl. 8.1, 8.1.1 & 10.1 Table 1 (Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| Cl. 8.1, 8.1.1 & 10.1 Table 1 (Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| Cl. 8.1, 8.1.1 & 10.1 Table 1 (Nickel -IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| Cl. 8.1, 8.1.1 & 10.1 Table 1 (Chromium -IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| Cl. 8.1, 8.1.1 & 10.1 Table 1 (Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| Cl. 8.1, 8.1.1 & 10.1 Table 1 (Copper -IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| Cl. 8.1, 8.1.1 & 10.1 Table 1 (Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| 6 (Freedom From Defects) |
- |
|
|
|
| 9.3, Table 3 (Yield Strength, Mpa) |
- |
|
|
|
| 9.3, Table 3 (Elongation, %) |
- |
|
|
|
| 9.4 (Erichsen Cupping Test,(Average depth of cupping) mm) |
- |
|
|
|
| 14.2 ( Width, mm) |
- |
|
|
|
| 14.1 (Thickness,mm) |
- |
|
|
|
| 14.3 (Length, mm) |
- |
|
|
|
| 14.5 (Camber, mm) |
- |
|
|
|
| 6 (Freedom From Defects) |
- |
|
|
|
| 9.3, Table 3 (Yield Strength, Mpa) |
- |
|
|
|
| 9.3, Table 3 (Elongation, %) |
- |
|
|
|
| 9.4 (Erichsen Cupping Test,(Average depth of cupping) mm) |
- |
|
|
|
| 14.2 ( Width, mm) |
- |
|
|
|
| 14.1 (Thickness,mm) |
- |
|
|
|
| 14.3 (Length, mm) |
- |
|
|
|
| 14.5 (Camber, mm) |
- |
|
|
|
|
- |
-
Mech-Type of conditioning, heat treatment, grade, form size,finish to be declared.. Chem- Facility not available for S, Mo(>1.5), C (<0.05) |
| 10584 |
BIS, Guwahati Branch Laboratory (GBL)
| IS 1489 : Part 2 (2015) |
Portland - Pozzolana cement - Specification: Part 2 calcined clay based |
- |
Rs.8420/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7 -Table 2- i (Fineness 4031 Part 2) |
- |
|
|
|
| 7 -Table 2- ii- a (Expansion by Le Chatelier- 4031 Part 3) |
- |
|
|
|
| 7 -Table 2- ii- a (Expansion after aeration - 4031 Part 3) |
- |
|
|
|
| 7 -Table 2- ii- b (Expansion by Autoclave- 4031 Part 3) |
- |
|
|
|
| 7 -Table 2- ii- b (Expansion after aeration- 4031 Part 3) |
- |
|
|
|
| 7 -Table 2- iii- a (Setting Time Initial- 4031 Part 5) |
- |
|
|
|
| 7 -Table 2-iii- b (Setting Time Final- 4031 Part 5) |
- |
|
|
|
| 7 -Table 2- iv- a (Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6) |
- |
|
|
|
| 7 -Table 2- iv- b (Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6) |
- |
|
|
|
| 7 -Table 2- iv- c (Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6) |
- |
|
|
|
| 7 -Table 2- vi (Drying Shrinkage- IS 4031 Part 10) |
- |
|
|
|
| 6 - Table - 1 i (Insoluble residue - Cl 7.4 of IS 4032:1985) |
- |
|
|
|
| 6 - Table - 1 ii (Magnesia - Cl 7.2 of IS 4032:1985) |
- |
|
|
|
| 6 - Table - 1 iii (Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985) |
- |
|
|
|
| 6 - Table - 1 iv (Loss on ignition - Cl 7.1 of IS 4032:1985) |
- |
|
|
|
| 6 - Table - 1 v (Chloride content - Cl 4.13 of IS 4032:1985) |
- |
|
|
|
| 6 - Table - 1 vi ( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985) |
- |
|
|
|
|
- |
-
Partial T.F. available. (Transverse strength test is not available) |
| 10585 |
BIS, Southern Regional Laboratory (SRL)
| IS 10325 (2000) |
Square tins - 15 kg/litre for ghee, vanaspati, edible oils and bakery shortenings - Specification (Second Revision) |
- |
- View breakup
Rs.3700/- (excluding Solder testing) and Rs.1500/- for solder testing.
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1 (Dimensions and Tolerances) |
- |
|
|
|
| 4.2.2 (Handle) |
- |
|
|
|
| 5.1 (Air-Pressure Test) |
- |
|
|
|
| 5.3 (Hydraulic Pressure Test) |
- |
|
|
|
| 5.2 (Handle Pull Test) |
- |
|
|
|
| 4.1 (Dimensions and Tolerances) |
- |
|
|
|
| 4.3.1 (Manufacture) |
- |
|
|
|
| 4.3.2 (Manufacture) |
- |
|
|
|
| 4.3.4 (Manufacture) |
- |
|
|
|
| 4.3.5 (Handle) |
- |
|
|
|
| 4.3.5 (Handle) |
- |
|
|
|
| 4.3.5 (Handle) |
- |
|
|
|
| 4.3.5 (Handle) |
- |
|
|
|
|
- |
-
" 3 Nos. "
Excluding Chemical facility(tin Coating test) not available. |
| 10586 |
BIS, Southern Regional Laboratory (SRL)
| IS 15962 (2012) |
Structural steels for buildings and structures with improved seismic resistance |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 6 (Freedom from Defects) |
- |
|
|
|
| Cl 10 (Tensile Test) |
- |
|
|
|
| Cl 11 (Impact Test) |
- |
|
|
|
| Cl 13 (Dimensions) |
- |
|
|
|
| Cl 13 (Dimensions) |
- |
|
|
|
| Cl 13 (Dimensions) |
- |
|
|
|
| Cl 13 (Dimensions) |
- |
|
|
|
|
- |
-
" 1.5 m "
Excluding except tensile test for the samples of diameter above 20 mm and chemical tests; (Prepared test pieces are required for Impact test) |
| 10587 |
BIS, Northern Regional Laboratory (NRL)
| IS 1011 (2002) |
Biscuits - Specification (Fourth Revision) |
- |
Rs.3280/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6.1 (General Requirement) |
- |
|
|
|
| 6.3 Table 2 i (Moisture) |
- |
|
|
|
| 6.3 Table 2 ii (Acid insoluble ash (on dry basis)) |
- |
|
|
|
| 6.3 Table 2 iii (Acidity of extracted fat (as oleic acid)) |
- |
|
|
|
| 6.3 Table 2 i (Moisture) |
- |
|
|
|
| 6.3 Table 2 ii (Acid insoluble ash (on dry basis)) |
- |
|
|
|
| 6.3 Table 2 iii (Acidity of extracted fat (as oleic acid)) |
- |
|
|
|
|
- |
-
Test facility is complete |
| 10588 |
BIS, Southern Regional Laboratory (SRL)
| IS 1029 (1970) |
Specification for hot-rolled steel strip (Baling) (First Revision) |
- |
Rs.750/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7.1 (Freedom from defects) |
- |
|
|
|
| 8.2 (Width) |
- |
|
|
|
| 8.2 (Thickness) |
- |
|
|
|
| 9.1 (Finishing & Packing) |
- |
|
|
|
|
- |
-
" 0.5 sq.m
Excluding except tensile, bend test and chemical tests |
| 10589 |
BIS, Southern Regional Laboratory (SRL)
| IS 1079 (2017) |
Hot rolled carbon steel sheet, plate and strip - Specification (Seventh Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 8 (UTM) |
- |
|
|
|
| Cl 12 (Workmanship) |
- |
|
|
|
| Cl 13 (Length, Width & Thickness) |
- |
|
|
|
|
- |
-
" 2x0.5 mt "
Excluding Excl cupping test, Bend test (as lower sizes of manderls is not available), Strain aging test and chemical requirements |
| 10590 |
BIS, Eastern Regional Laboratory (ERL)
| IS 16208 (2015) |
Textiles - High density polyethylene (HDPE)/polypropylene (PP) woven sacks for packaging 10 kg, 15 kg, 20 kg, 25 kg and 30 kg foodgrains - Specification |
all varieties. |
Rs.19750/- (including all parameters), Rs.10450/- (excl View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3 (TYPES) |
- |
|
|
|
| 4.2 (Construction) |
- |
|
|
|
| 4.3.1 (Bottom Seam) |
- |
|
|
|
| 4.3.1 ( The two rows of stitches shall be separated from each other) |
- |
|
|
|
| 4.3.1 ( The outer stitch) |
- |
|
|
|
| 4.3.1 (Stitches pass through a minimum of six layers of the fabric. ) |
- |
|
|
|
| 4.3.1 (The number of stitches/dm) |
- |
|
|
|
| 4.3.2 (Mouth) |
- |
|
|
|
| 4.4 and Table 1 i (Capacity) |
- |
|
|
|
| 5.2 and Table 1 ii a (Dimensions Inside Length) |
- |
|
|
|
| 5.2 and Table 1 ii b (Dimensions Inside Width) |
- |
|
|
|
| 5.2 and Table 1 iii (Ends per dm ) |
- |
|
|
|
| 5.2 and Table 1 iv (Picks per dm ) |
- |
|
|
|
| 5.1 and Table 1 v (Mass of sack ) |
- |
|
|
|
| 5.2 and Table 1 vi a (Average breaking strength of fabric Lengthwise ) |
- |
|
|
|
| 5.2 and Table 1 vi b (Average breaking strength of fabric Widthwise ) |
- |
|
|
|
|
- |
-
Mech- Excluding UV resistance. Type and material to be declared. |
