BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15572 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

10591

Central Institute of Petrochemical Engineering and Technology (CIPET), Guwahati

5117534

IS 11584 (1986)

Specification for high density polyethylene (Hdpe) crates for milk satchets

PE MAN A50 D 045 or PE MAN A.50 D 090 or PE MAN A57D090

11600.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.2(Material )	-	2000	-
2.3(Shape and Dimensions)	-	500	-
2.4(Mass )	-	500	-
2.5(Appearance and Surface Finish)	-	500	-
2.6(Colour Fastness)	-	0	Not Applicable as agreed between the purchaser and the supplier
2.7(Resistance to Stress)	-	1000	-
2.8(Resistance to Applied Load)	-	1000	-
2.9(Strength)	-	2100	-
2.1(Dimensional Stability)	-	2300	-
2.1(Crates)	-	700	-
2.2(Material)	-	1100	-
2.3(Shape and Dimensions)	-	500	-
2.4(Mass)	-	500	-
2.5(Appearance and surface finish)	-	500	-
2.6(Colour Fastness)	-	0	-
2.7(Resistance to stress)	-	1000	-
2.8(Resistance to Applied Load)	-	1000	-
2.9(Strength)	-	3400	Test Charge - 2200.00 Specimen Preparation - 1200.00
2.10(Dimensional Stability)	-	900	-
3(Marking)	-	0	-
2.1(Material Identification)	-	2000	-

31 Dec, 2026

-
Included w.e.f. 20.08.2024

10592

Central Institute of Petrochemical Engineering and Technology (CIPET), Guwahati

5117534

IS 14333 (2022)

Polyethylene Pipes for Sewerage and Industrial Chemicals and Effluent ï¿½ Specification (First Revision)

PE 63/PE 80/PE 100

41813.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2.1,T2("Base Density (At 27°C Temp.)-IS 7328:2020 ")	-	1325	Test Charge - 700.00 Sample Preparation - 625.00
5.2.1,T2(Melt Flow Rate (At 190°C /5kg)-IS 2530:1963)	-	1100	Test Charge - 1100.00 Sample Preparation - 0.00
5.2.1,T2(Thermal Stability(Oxidation Induction Time)-IS 4984:2016(Annexure-B))	-	2200	Test Charge - 2200.00 Sample Preparation - 0.00
5.2.1,T2("Water Content-IS 4984:2016 (Annexure-D)")	-	700	Test Charge - 700.00 Sample Preparation - 0.00
5.2.1.1, T2(Compound Density-IS 7328:2020)	-	700	Test Charge - 700.00 Sample Preparation - 0.00
5.2.1.1, T2("Compound carbon black -IS 2530:1963 content")	-	925	Test Charge - 9250.00 Sample Preparation - 0.00
5.2.1.1, T2(Compound Toluene extract - Any Method)	-	900	Test Charge - 900.00 Sample Preparation - 0.00
5.2.1.1, T2(Compound maximum volatile matter -IS 4984:2016 (Annexure-C))	-	700	Test Charge - 700.00 Sample Preparation - 0.00
5.2.1.1, T2(Compound carbon black particle size- Any Method)	-	3000	Test Charge - 3000.00 Sample Preparation - 0.00
5.2.1.1, T2(Compound ash content - Any Method)	-	1200	Test Charge - 1200.00 Sample Preparation - 0.00
5.2.1.1, T2("Compound carbon black -IS 2530:1963 dispersion")	-	700	Test Charge - 700.00 Sample Preparation - 0.00
5.3(Density of Higher olefin - IS 7328:2020)	-	700	Test Charge - 700.00 Sample Preparation - 0.00
5.3(Olefin Constituents- 14333-2022)	-	0	-
5.3(Loading of Carbon Black - IS 2530:1963)	-	925	Test Charge - 925.00 Sample Preparation - 0.00
5.3(Ash content- Any Method)	-	1200	Test Charge - 1200.00 Sample Preparation - 0.00
5.3(Toluene extract - Any Method)	-	900	Test Charge - 700.00 Sample Preparation - 0.00
5.3("Maximum volatile matter -IS 4984:2016 (Annexure-C)")	-	700	Test Charge - 700.00 Sample Preparation - 0.00
5.3(Carbon black particle size - Any Method)	-	3000	Test Charge - 3000.00 Sample Preparation - 0.00
5.4(Antioxidant - Any Method)	-	0	-
6(Pipe Description - IS 14333-2022)	-	0	-
6.2(Colour- IS 14333-2022)	-	500	-
7.1(Visual Appearance- IS 14333-2022)	-	500	-
7.2(Length- IS 14333-2022)	-	500	-
7.3(Coiling- IS 14333-2022)	-	0	-
7.4,T3 of IS 4984(Outside Diameter-IS 4984-2016)	-	500	Test Charge includes OD, Wall Thickness & Ovality
7.4,T4 of IS 4984(wall Thickness-IS 4984-2016)	-	0	-
7.4,T3 of IS 4984(Ovality-IS 4984-2016)	-	0	-
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 27 oC , Test Period - 100 hrs.-IS 4984-2016 (Annexure-E))	-	4000	Test Charge - 4000.00 Sample Preparation - 0.00
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 48 hrs.-IS 4984-2016 (Annexure-E))	-	1600	Test Charge - 1600.00 Sample Preparation - 0.00
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 165 hrs.-IS 4984-2016 (Annexure-E))	-	4800	Test Charge - 4800.00 Sample Preparation - 0.00
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 1000 hrs.-IS 4984-2016 (Annexure-E))	-	11000	Test Charge - 11000.00 Sample Preparation - 0.00
8.1.2, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 48 hrs.-IS 4984-2016 (Annexure-E))	-	1600	Test Charge - 1600.00 Sample Preparation - 0.00
8.2("Longitudinal Reversion Test - IS 4984-2016 (Annexure-F)")	-	1200	Test Charge - 700.00 Sample Preparation - 500.00
8.3(Carbon black content- IS 2530-1963)	-	925	Test Charge - 925.00 Sample Preparation - 0.00
8.3(Carbon black content Dispersion- IS 2530-1963)	-	700	Test Charge - 700.00 Sample Preparation - 0.00
8.4(Melt Flow rate(Temperature - 190oC,Mass 5kg)-IS 2530-1963)	-	1100	Test Charge - 1100.00 Sample Preparation - 0.00
8.5(Oxidation Induction Time -IS 4984:2016(Annexure-B))	-	2200	Test Charge - 2200.00 Sample Preparation - 0.00
8.6(Density-IS 7328:2020)	-	700	Test Charge - 700.00 Sample Preparation - 0.00
8.7("Tensile Strength for Butt Fusion - IS 4984-2016 (Annexure-G)")	-	1800	Test Charge - 1300.00 Sample Preparation - 500.00
8.8,T5("Tensile - IS 4984-2016 (Annexure-H)")	-	1800	Test Charge - 1300.00 Sample Preparation - 500.00
8.8,T5("Elongation -IS 4984-2016 (Annexure-H)")	-	1800	Test Charge - 1300.00 Sample Preparation - 500.00
8.9(Slow Crack Growth Rate{Internal Pressure creep Rupture test, Temperature - 80±1 oC , Test Pressure – 0.80MPa, Test Period - 500 hrs.-IS 4984-2016 (Annexure-E &J))	-	6000	Test Charge - 5500.00 Sample Preparation - 500.00
5.2.1,T2("Volatile Matter- IS 4984:2016 (Annexure-C)")	-	700	Test Charge - 700.00 Sample Preparation - 0.00
5.2.1,T2("Base Density (At 27°C Temp.)-IS 7328:2020 ")	-	0	Already quoted
5.2.1,T2(Melt Flow Rate (At 190°C /5kg)-IS 2530:1963)	-	0	Already quoted
5.2.1,T2(Thermal Stability(Oxidation Induction Time)-IS 4984:2016(Annexure-B))	-	0	Already quoted
5.2.1,T2("Water Content-IS 4984:2016 (Annexure-D)")	-	0	Already quoted
5.2.1.1, T2(Compound Density-IS 7328:2020)	-	0	Already quoted
5.2.1.1, T2("Compound carbon black -IS 2530:1963 content")	-	0	Already quoted
5.2.1.1, T2(Compound Toluene extract - Any Method)	-	900	-
5.2.1.1, T2(Compound maximum volatile matter -IS 4984:2016 (Annexure-C))	-	0	Already quoted
5.2.1.1, T2(Compound carbon black particle size- Any Method)	-	0	Already quoted
5.2.1.1, T2(Compound ash content - Any Method)	-	0	Already quoted
5.2.1.1, T2("Compound carbon black -IS 2530:1963 dispersion")	-	0	Already quoted
5.3(Density of Higher olefin - IS 7328:2020)	-	0	Already quoted
5.3(Olefin Constituents- 14333-2022)	-	0	Already quoted
5.3(Loading of Carbon Black - IS 2530:1963)	-	0	Already quoted
5.3(Ash content- Any Method)	-	0	Already quoted
5.3(Toluene extract - Any Method)	-	0	Already quoted
5.3("Maximum volatile matter -IS 4984:2016 (Annexure-C)")	-	0	Already quoted
5.3(Carbon black particle size - Any Method)	-	0	Already quoted
5.4(Antioxidant - Any Method)	-	0	Already quoted
6(Pipe Description - IS 14333-2022)	-	0	Already quoted
6.2(Colour- IS 14333-2022)	-	500	-
7.1(Visual Appearance- IS 14333-2022)	-	500	-
7.2(Length- IS 14333-2022)	-	500	-
7.3(Coiling- IS 14333-2022)	-	0	-
7.4,T3 of IS 4984(Outside Diameter-IS 4984-2016)	-	0	Already quoted
7.4,T4 of IS 4984(wall Thickness-IS 4984-2016)	-	0	Already quoted
7.4,T3 of IS 4984(Ovality-IS 4984-2016)	-	0	Already quoted
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 27 oC , Test Period - 100 hrs.-IS 4984-2016 (Annexure-E))	-	0	Already quoted
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 48 hrs.-IS 4984-2016 (Annexure-E))	-	0	Already quoted
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 165 hrs.-IS 4984-2016 (Annexure-E))	-	0	Already quoted
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 1000 hrs.-IS 4984-2016 (Annexure-E))	-	0	Already quoted
8.1.2, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 48 hrs.-IS 4984-2016 (Annexure-E))	-	0	Already quoted
8.2("Longitudinal Reversion Test - IS 4984-2016 (Annexure-F)")	-	0	Already quoted
8.3(Carbon black content- IS 2530-1963)	-	0	Already quoted
8.3(Carbon black content Dispersion- IS 2530-1963)	-	0	Already quoted
8.4(Melt Flow rate(Temperature - 190oC,Mass 5kg)-IS 2530-1963)	-	0	Already quoted
8.5(Oxidation Induction Time -IS 4984:2016(Annexure-B))	-	0	Already quoted
8.6(Density-IS 7328:2020)	-	0	Already quoted
8.7("Tensile Strength for Butt Fusion - IS 4984-2016 (Annexure-G)")	-	0	Already quoted
8.8,T5("Tensile - IS 4984-2016 (Annexure-H)")	-	0	Already quoted
8.8,T5("Elongation -IS 4984-2016 (Annexure-H)")	-	0	Already quoted
8.9(Slow Crack Growth Rate{Internal Pressure creep Rupture test, Temperature - 80±1 oC , Test Pressure – 0.80MPa, Test Period - 500 hrs.-IS 4984-2016 (Annexure-E &J))	-	0	Already quoted
5.2.1,T2("Volatile Matter- IS 4984:2016 (Annexure-C)")	-	0	Already quoted

31 Dec, 2026

-
Included w.e.f. 28.08.2024 Exclusion: Cl.5.4 (Antioxidant - Any Method)

10593

Central Institute of Petrochemical Engineering and Technology (CIPET), Guwahati

5117534

IS 16654 (2017)

Geosynthetics - Polyprophylene multifilament woven geobags for coastal and waterways protection - Specification

Type 1 & Type 2

117256.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4.1.1 Table 1 B (ii)(Apperent opening size)	-	700	Testing Charges-700.00 Specimen preparation charges-0
Cl 4.1.1 Table 1 A (i) (a)(Tensile strength, Machine Direction)	-	1600	Testing Charges-1100.00 Specimen preparation charges-500.00
Cl 4.1.1 Table 1 A (ii) (a)(Elongation at designed tensile strength, Machine Direction)	-	0	-
Cl 4.1.1 Table 1 A (iii)(Seam strength)	-	1100	Testing Charges-1100.00 Specimen preparation charges-00.00
Cl 4.1.1 Table 1 A (iv) (a)(Abrasion resistance, Machine Direction)	-	4075	Testing Charges-3075.00 Specimen preparation charges-1000.00
Cl 4.1.1 Table 1 A (v) (a)(Trapezodial tear strength, Machine Direction)	-	1600	Testing Charges-1100.00 Specimen preparation charges-500.00
Cl 4.1.1 Table 1 A (vi)(Puncture resistance)	-	1600	Testing Charges-1100.00 Specimen preparation charges-500.00
Cl 4.1.1 Table 1 B (i)(Water permeability)	-	1700	Testing Charges-1200.00 Specimen preparation charges-500.00
Cl 4.1.1 Table 1 C (i)(Mass)	-	500	-
Cl 4.1.1 Table 1 C (ii) (a)(Length of geobag, Small size)	-	500	-
Cl 4.1.1 Table 1 C (iii) (a)(Width of geobag, small size)	-	500	-
Cl 4.1.1 Table 1 C (iv) (a)(Mass of sand filled geobag, small size)	-	500	-
Cl 4.1.1 Table 1 C (v)(UV resistance after 500h)	-	92200.00	Testing Charges-2200.00 Specimen preparation charges-90000.00
Cl 4.1.1 Table 1 A (i) (b)(Tensile strength, Cross Machine Direction)	-	1600	Testing Charges-1100.00 Specimen preparation charges-500.00
Cl 4.1.1 Table 1 A (ii) (b)(Elongation at designed tensile strength, Cross Machine Direction)	-	0	-
Cl 4.1.1 Table 1 A (iv) (b)(Abrasion resistance, Cross Machine Direction)	-	4075	Testing Charges-3075.00 Specimen preparation charges-1000.00
Cl 4.1.1 Table 1 A (v) (b)(Trapezodial tear strength, Cross Machine Direction)	-	1600	Testing Charges-1100.00 Specimen preparation charges-500.00
Cl 4.1.1 Table 1 C (ii) (b)(Length of geobag, large size)	-	500	-
Cl 4.1.1 Table 1 C (iii) (b)(Width of geobag, large size)	-	500	-
Cl 4.1.1 Table 1 C (iv) (b)(Mass of sand filled geobag, large size)	-	500	-
Cl 5(Marking)	-	3200	Testing Charges-3200.00 Specimen preparation charges-0.00
4.3(Prefabrication of Geobags)	-	4300	Testing Charges-4300.00 Specimen preparation charges-0.00
Cl 4.1.1 Table 1 B (ii)(Apperent opening size)	-	700	-
Cl 4.1.1 Table 1 A (i) (a)(Tensile strength, Machine Direction)	-	1600	-
Cl 4.1.1 Table 1 A (ii) (a)(Elongation at designed tensile strength, Machine Direction)	-	0	-
Cl 4.1.1 Table 1 A (iii)(Seam strength)	-	1600	-
Cl 4.1.1 Table 1 A (iv) (a)(Abrasion resistance, Machine Direction)	-	4075	-
Cl 4.1.1 Table 1 A (v) (a)(Trapezodial tear strength, Machine Direction)	-	1600	-
Cl 4.1.1 Table 1 A (vi)(Puncture resistance)	-	1600	-
Cl 4.1.1 Table 1 B (i)(Water permeability)	-	700	-
Cl 4.1.1 Table 1 C (i)(Mass)	-	500	-
Cl 4.1.1 Table 1 C (ii) (a)(Length of geobag, Small size)	-	500	-
Cl 4.1.1 Table 1 C (iii) (a)(Width of geobag, small size)	-	500	-
Cl 4.1.1 Table 1 C (iv) (a)(Mass of sand filled geobag, small size)	-	500	-
Cl 4.1.1 Table 1 C (v)(UV resistance after 500h)	-	92200	-
Cl 4.1.1 Table 1 A (i) (b)(Tensile strength, Cross Machine Direction)	-	1600	-
Cl 4.1.1 Table 1 A (ii) (b)(Elongation at designed tensile strength, Cross Machine Direction)	-	0	-
Cl 4.1.1 Table 1 A (iv) (b)(Abrasion resistance, Cross Machine Direction)	-	4075	-
Cl 4.1.1 Table 1 A (v) (b)(Trapezodial tear strength, Cross Machine Direction)	-	1600	-
Cl 4.1.1 Table 1 C (ii) (b)(Length of geobag, large size)	-	500	-
Cl 4.1.1 Table 1 C (iii) (b)(Width of geobag, large size)	-	500	-
Cl 4.1.1 Table 1 C (iv) (b)(Mass of sand filled geobag, large size)	-	500	-
Cl 5(Marking)	-	0	-
4.3(Prefabrication of Geobags)	-	0	-

31 Dec, 2026

-
Included w.e.f. 28.08.2024

10594

Advance Firetec and Research Lab Pvt. Ltd

8176606

IS 12585 (2023)

SPECIFICATION FOR THERMOPLASTIC HOSES (TEXTILE REINFORCED) FOR WATER - GENERAL PURPOSE ( First Revision of IS 12585 )

All Types

33500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Materials and Construction)	-	300	Material
5(Materials and Construction)	-	300	Construction
6.1(Dimensions (Inside diameters and tolerances on inside diameter))	-	200	-
6.2(Concentricity)	-	300	-
6.3(Tolerance on Length)	-	200	-
6.4(Minimum Wall Thickness)	-	200	-
7, 7.1 -Table 2(Physical Properties-Thermoplastic materials (Minimum Tensile Strength) - Lining)	-	1000	Minimum tensile strength for lining
7, 7.1 -Table 2(Physical Properties-Thermoplastic materials (Minimum Tensile Strength) - Cover)	-	1000	Minimum tensile strength for cover.
7, 7.1 -Table 2(Physical Properties-Thermoplastic materials (Minimum Elongation at break) - Lining)	-	1000	Minimum Elongation at break for lining.
7, 7.1 -Table 2(Physical Properties-Thermoplastic materials (Minimum Elongation at break) - Cover)	-	1000	Minimum Elongation at break for cover.
7, 7.1 -Table 2(Physical Properties-Thermoplastic materials-Resistance to ageing (Change in Tensile Strength from original value, max) -Lining)	-	1500	Resistance to ageing -change in tensile strength from original value for lining.
7, 7.1 -Table 2(Physical Properties-Thermoplastic materials - Resistance to ageing(Change in Tensile Strength from original value, max) -Cover)	-	1500	Resistance to ageing -change in tensile strength from original value for cover.
7, 7.1 -Table 2(Physical Properties-Thermoplastic materials - Resistance to ageing(Change in Elongation at break from original value, max) - Lining)	-	1500	Resistance to ageing -change in elongation break from original value for lining.
7, 7.1 -Table 2(Physical Properties-Thermoplastic materials - Resistance to ageing(Change in Elongation at break from original value, max) - Cover)	-	1500	Resistance to ageing -change in elongation break from original value for cover.
7, 7.1 -Table 2(Physical Properties-Thermoplastic materials - Loss in mass on heating- Lining)	-	2500	Loss in mass on heating for lining
7, 7.1 -Table 2(Physical Properties-Thermoplastic materials - Loss in mass on heating- Cover)	-	2500	Loss in mass on heating for cover
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Proof Pressure at 23°C - Type 1)	-	2000	Proof pressure test 23 degree centigrade for Type-1
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Proof Pressure at 23°C - Type 2)	-	2000	Proof pressure test 23 degree centigrade for Type-2
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Proof Pressure at 23°C - Type 3)	-	2000	Proof pressure test 23 degree centigrade for Type-3
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Minimum Burst Pressure at 23°C - Type 1)	-	2000	Minimum burst pressure at 23 degree centigrade for Type-1
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Minimum Burst Pressure at 23°C - Type 2)	-	2000	Minimum burst pressure at 23 degree centigrade for Type-2
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Minimum Burst Pressure at 23°C - Type 3)	-	2000	Minimum burst pressure at 23 degree centigrade for Type-3
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Proof Pressure at 60°C - Type 1)	-	2500	Proof pressure test 60 degree centigrade for Type-1
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Proof Pressure at 60°C - Type 2)	-	2500	Proof pressure test 60 degree centigrade for Type-2
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Proof Pressure at 60°C - Type 3)	-	2500	Proof pressure test 60 degree centigrade for Type-3
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Minimum Burst Pressure at 60°C - Type 1)	-	2500	Minimum Burst pressure at 60 deg. cent. for Type-1
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Minimum Burst Pressure at 60°C - Type 2)	-	2500	Minimum Burst pressure at 60 deg. cent. for Type-2
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Minimum Burst Pressure at 60°C - Type 3)	-	2500	Minimum Burst pressure at 60 deg. cent. for Type-3
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Change in Length at maximum working pressure at 23°C (±8%))	-	1000	Change in length at Maximum working pressure at 23 deg. cent.
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Adhesion between components)	-	1000	Adhesion between components.
7, 7.2 -Table 3(Flexibility at 23°C)	-	1000	Flexibility at 23 deg.cent.
7, 7.2 -Table 3(Low Temperature flexibility)	-	5000	Low temperature Flexibility.
7, 7.2 -Table 3(Physical Properties-Finished Hoses - UV resistance (Xenon-arc lamp))	-	0	U-V Resistance (Xenon Arc Lamp)- Excluded.
5(Materials and Construction)	-	0	Repeat
5(Materials and Construction)	-	0	Repeat
6.1(Dimensions (Inside diameters and tolerances on inside diameter))	-	0	Repeat
6.2(Concentricity)	-	0	Repeat
6.3(Tolerance on Length)	-	0	Repeat
6.4(Minimum Wall Thickness)	-	0	Repeat
7, 7.1 -Table 2(Physical Properties-Thermoplastic materials (Minimum Tensile Strength) - Lining)	-	0	Repeat
7, 7.1 -Table 2(Physical Properties-Thermoplastic materials (Minimum Tensile Strength) - Cover)	-	0	Repeat
7, 7.1 -Table 2(Physical Properties-Thermoplastic materials (Minimum Elongation at break) - Lining)	-	0	Repeat
7, 7.1 -Table 2(Physical Properties-Thermoplastic materials (Minimum Elongation at break) - Cover)	-	0	Repeat
7, 7.1 -Table 2(Physical Properties-Thermoplastic materials-Resistance to ageing (Change in Tensile Strength from original value, max) -Lining)	-	0	Repeat
7, 7.1 -Table 2(Physical Properties-Thermoplastic materials - Resistance to ageing(Change in Tensile Strength from original value, max) -Cover)	-	0	Repeat
7, 7.1 -Table 2(Physical Properties-Thermoplastic materials - Resistance to ageing(Change in Elongation at break from original value, max) - Lining)	-	0	Repeat
7, 7.1 -Table 2(Physical Properties-Thermoplastic materials - Resistance to ageing(Change in Elongation at break from original value, max) - Cover)	-	0	Repeat
7, 7.1 -Table 2(Physical Properties-Thermoplastic materials - Loss in mass on heating- Lining)	-	0	Repeat
7, 7.1 -Table 2(Physical Properties-Thermoplastic materials - Loss in mass on heating- Cover)	-	0	Repeat
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Proof Pressure at 23°C - Type 1)	-	0	Repeat
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Proof Pressure at 23°C - Type 2)	-	0	Repeat
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Proof Pressure at 23°C - Type 3)	-	0	Repeat
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Minimum Burst Pressure at 23°C - Type 1)	-	0	Repeat
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Minimum Burst Pressure at 23°C - Type 2)	-	0	Repeat
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Minimum Burst Pressure at 23°C - Type 3)	-	0	Repeat
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Proof Pressure at 60°C - Type 1)	-	0	Repeat
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Proof Pressure at 60°C - Type 2)	-	0	Repeat
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Proof Pressure at 60°C - Type 3)	-	0	Repeat
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Minimum Burst Pressure at 60°C - Type 1)	-	0	Repeat
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Minimum Burst Pressure at 60°C - Type 2)	-	0	Repeat
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Minimum Burst Pressure at 60°C - Type 3)	-	0	Repeat
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Change in Length at maximum working pressure at 23°C (±8%))	-	0	Repeat
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Adhesion between components)	-	0	Repeat
7, 7.2 -Table 3(Flexibility at 23°C)	-	0	Repeat
7, 7.2 -Table 3(Low Temperature flexibility)	-	0	Repeat
7, 7.2 -Table 3(Physical Properties-Finished Hoses - UV resistance (Xenon-arc lamp))	-	0	Repeat
5(Materials and Construction)	-	0	Repeat
5(Materials and Construction)	-	0	Repeat
6.1(Dimensions (Inside diameters and tolerances on inside diameter))	-	0	Repeat
6.2(Concentricity)	-	0	Repeat
6.3(Tolerance on Length)	-	0	Repeat
6.4(Minimum Wall Thickness)	-	0	Repeat
7, 7.1 -Table 2(Physical Properties-Thermoplastic materials (Minimum Tensile Strength) - Lining)	-	0	Repeat
7, 7.1 -Table 2(Physical Properties-Thermoplastic materials (Minimum Tensile Strength) - Cover)	-	0	Repeat
7, 7.1 -Table 2(Physical Properties-Thermoplastic materials (Minimum Elongation at break) - Lining)	-	0	Repeat
7, 7.1 -Table 2(Physical Properties-Thermoplastic materials (Minimum Elongation at break) - Cover)	-	0	Repeat
7, 7.1 -Table 2(Physical Properties-Thermoplastic materials-Resistance to ageing (Change in Tensile Strength from original value, max) -Lining)	-	0	Repeat
7, 7.1 -Table 2(Physical Properties-Thermoplastic materials - Resistance to ageing(Change in Tensile Strength from original value, max) -Cover)	-	0	Repeat
7, 7.1 -Table 2(Physical Properties-Thermoplastic materials - Resistance to ageing(Change in Elongation at break from original value, max) - Lining)	-	0	Repeat
7, 7.1 -Table 2(Physical Properties-Thermoplastic materials - Resistance to ageing(Change in Elongation at break from original value, max) - Cover)	-	0	Repeat
7, 7.1 -Table 2(Physical Properties-Thermoplastic materials - Loss in mass on heating- Lining)	-	0	Repeat
7, 7.1 -Table 2(Physical Properties-Thermoplastic materials - Loss in mass on heating- Cover)	-	0	Repeat
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Proof Pressure at 23°C - Type 1)	-	0	Repeat
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Proof Pressure at 23°C - Type 2)	-	0	Repeat
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Proof Pressure at 23°C - Type 3)	-	0	Repeat
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Minimum Burst Pressure at 23°C - Type 1)	-	0	Repeat
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Minimum Burst Pressure at 23°C - Type 2)	-	0	Repeat
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Minimum Burst Pressure at 23°C - Type 3)	-	0	Repeat
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Proof Pressure at 60°C - Type 1)	-	0	Repeat
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Proof Pressure at 60°C - Type 2)	-	0	Repeat
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Proof Pressure at 60°C - Type 3)	-	0	Repeat
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Minimum Burst Pressure at 60°C - Type 1)	-	0	Repeat
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Minimum Burst Pressure at 60°C - Type 2)	-	0	Repeat
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Minimum Burst Pressure at 60°C - Type 3)	-	0	Repeat
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Change in Length at maximum working pressure at 23°C (±8%))	-	0	Repeat
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Adhesion between components)	-	0	Repeat
7, 7.2 -Table 3(Flexibility at 23°C)	-	0	Repeat
7, 7.2 -Table 3(Low Temperature flexibility)	-	0	Repeat
5(Materials and Construction)	-	-	-
5(Materials and Construction)	-	-	-
6.1(Dimensions (Inside diameters and tolerances on inside diameter))	-	-	-
6.2(Concentricity)	-	-	-
6.3(Tolerance on Length)	-	-	-
6.4(Minimum Wall Thickness)	-	-	-
7, 7.1 -Table 2(Physical Properties-Thermoplastic materials (Minimum Tensile Strength) - Lining)	-	-	-
7, 7.1 -Table 2(Physical Properties-Thermoplastic materials (Minimum Tensile Strength) - Cover)	-	-	-
7, 7.1 -Table 2(Physical Properties-Thermoplastic materials (Minimum Elongation at break) - Lining)	-	-	-
7, 7.1 -Table 2(Physical Properties-Thermoplastic materials (Minimum Elongation at break) - Cover)	-	-	-
7, 7.1 -Table 2(Physical Properties-Thermoplastic materials-Resistance to ageing (Change in Tensile Strength from original value, max) -Lining)	-	-	-
7, 7.1 -Table 2(Physical Properties-Thermoplastic materials - Resistance to ageing(Change in Tensile Strength from original value, max) -Cover)	-	-	-
7, 7.1 -Table 2(Physical Properties-Thermoplastic materials - Resistance to ageing(Change in Elongation at break from original value, max) - Lining)	-	-	-
7, 7.1 -Table 2(Physical Properties-Thermoplastic materials - Resistance to ageing(Change in Elongation at break from original value, max) - Cover)	-	-	-
7, 7.1 -Table 2(Physical Properties-Thermoplastic materials - Loss in mass on heating- Lining)	-	-	-
7, 7.1 -Table 2(Physical Properties-Thermoplastic materials - Loss in mass on heating- Cover)	-	-	-
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Proof Pressure at 23°C - Type 1)	-	-	-
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Proof Pressure at 23°C - Type 2)	-	-	-
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Proof Pressure at 23°C - Type 3)	-	-	-
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Minimum Burst Pressure at 23°C - Type 1)	-	-	-
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Minimum Burst Pressure at 23°C - Type 2)	-	-	-
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Minimum Burst Pressure at 23°C - Type 3)	-	-	-
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Proof Pressure at 60°C - Type 1)	-	-	-
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Proof Pressure at 60°C - Type 2)	-	-	-
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Proof Pressure at 60°C - Type 3)	-	-	-
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Minimum Burst Pressure at 60°C - Type 1)	-	-	-
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Minimum Burst Pressure at 60°C - Type 2)	-	-	-
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Minimum Burst Pressure at 60°C - Type 3)	-	-	-
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Change in Length at maximum working pressure at 23°C (±8%))	-	-	-
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Adhesion between components)	-	-	-
7, 7.2 -Table 3(Flexibility at 23°C)	-	-	-
7, 7.2 -Table 3(Low Temperature flexibility)	-	-	-

03 Mar, 2030

-
Included w.e.f 08.05.2025 Exclusion: Cl 7, 7.2 -Table 3 (Physical Properties-Finished Hoses - UV resistance (Xenon-arc lamp))

10595

Perficio Testing and Research Centre, Vadodara

7172436

IS 15633 (2022)

Automotive vehicles - pneumatic tyres for passenger car vehicles - diagonal and radial ply

73000 View breakup
Complete testing charges for Tube Type Tyres – INR 68,000/- Complete testing charges for Tubeless Tyres – INR 73,000/- Complete Testing Charges for Run Flat tyres and EMT- INR 95,000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Tyre dimension- Section Width)	-	2500	Complete testing charges for Tube Type Tyres – INR 68,000/- Complete testing charges for Tubeless Tyres – INR 73,000/-
4.1(Tyre dimension- Outer diameter)	-	2000	Complete testing charges for Tube Type Tyres – INR 68,000/- Complete testing charges for Tubeless Tyres – INR 73,000/-
4.2(Load & Speed test)	-	18500	Complete testing charges for Tube Type Tyres – INR 68,000/- Complete testing charges for Tubeless Tyres – INR 73,000/-
4.3(Endurance test)	-	45000	Complete testing charges for Tube Type Tyres – INR 68,000/- Complete testing charges for Tubeless Tyres – INR 73,000/-
4.4(Bead Unseating Resistance)	-	5500	Complete testing charges for Tube Type Tyres – INR 68,000/- Complete testing charges for Tubeless Tyres – INR 73,000/-
4.5(Tread wear Indicator)	-	3500	Complete testing charges for Tube Type Tyres – INR 68,000/- Complete testing charges for Tubeless Tyres – INR 73,000/-
4.6(Tyre strength (Plunger test))	-	9000	Complete testing charges for Tube Type Tyres – INR 68,000/- Complete testing charges for Tubeless Tyres – INR 73,000/-
Cl. No. 5.1 (a) to 5.1 (n)(Markings)	-	0	Complete testing charges for Tube Type Tyres – INR 68,000/- Complete testing charges for Tubeless Tyres – INR 73,000/-
Cl. No. 5.4, Annex H,(Arrangement of Tyre Markings)	-	0	Complete testing charges for Tube Type Tyres – INR 68,000/- Complete testing charges for Tubeless Tyres – INR 73,000/-
4.2.7 (Amendment -1)(Load/Speed Performance Test for Run Flat Tyres)	-	18500	-
4.2.8 (Amendment -1)(Load/Speed Performance Test for Extended Mobility Tyres (EMT))	-	18500	-

28 May, 2029

-
Amendment No.1 Included w.e.f. 08.05.2024

10596

International Testing Centre, MSME Technology Development Centre, Meerut

8177804

IS 6721 (2023)

SANDAL AND SLIPPERS SPECIFICATION First revision

32600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. No.8.6.1,Table 1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	3000	-
Cl. No.8.6.1,Table 1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	3000	-
Cl. No.8.6.1,Table 1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	3000	-
Cl. No.8.6.1,Table 1 of IS 17011(iv)(Chromium (VI))	-	1000	-
Cl. No.8.6.1,Table 1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	2000	-
Cl. No.8.6.1,Table 1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	1000	-
Cl. No.8.6.1,Table 1 of IS 17011(vii)(Formaldehyde)	-	1000	-
Cl. No.8.6.1,Table 1 of IS 17011(viii)(Organotin compounds)	-	3500	-
Cl. No.8.6.1,Table 1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	3000	-
Cl. No.8.6.1,Table 1 of IS 17011(x)(pH)	-	500	-
Cl. No.8.6.1,Table 1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	4500	-
Cl. No.8.6.1,Table 1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	2000	-
Cl. No.4(SHAPE AND DESIGN)	-	500	-
Cl. No.5("SIZE AND FITTINGS ")	-	300	-
Cl. No.6("CONSTRUCTION ")	-	300	-
Cl. No.7(MATERIAL)	-	300	-
Cl. No.8.1, Table no. 1(i),a("Tear strength, (other than moulded upper material) ")	-	500	-
Cl. No.8.1, Table no. 1(i),b("For all moulded upper material ")	-	300	-
Cl. No.8.1, Table no. 1(ii)(Flexing endurance)	-	800	-
Cl. No.8.2,Table no. 2(i)(Tear strength)	-	500	-
Cl. No.8.2,Table no. 2(ii),a("Abrasion resistance- At dry condition")	-	800	-
Cl. No.8.2,Table no. 2(ii),b("Abrasion resistance- At wet condition")	-	800	-
Cl. No.8.3,Table no. 3(i)(Tear strength)	-	500	-
Cl. No.8.3,Table no. 3(ii),a("Abrasion resistance- At dry condition")	-	800	-
Cl. No.8.3,Table no. 3(ii),b("Abrasion resistance- At wet condition")	-	800	-
Cl. No.8.4,Table no. 4(i)(Grain crack index)	-	300	-
Cl. No.8.4,Table no. 4(ii)(Density)	-	300	-
Cl. No.8.4,Table no. 5(i)(Density)	-	300	-
Cl. No.8.4,Table no. 5(ii)("Abrasion resistance, Volume loss ")	-	800	-
Cl. No.8.4, Table no. 5(iii)("Flexing resistance, At 30 000 flexes")	-	800	-
Cl. No.8.5, Table no. 6(i)("Bond strength, N/mm, Min (Applicable when fore part is fully covered or strap width is more than 25 mm)")	-	500	-
Cl. No.8.5, Table no. 6(ii)("Toe post attachment strength, N, Min (Applicable if toe post is present)")	-	500	-
Cl. No.8.5, Table no. 6(iii)("Toe ring attachment strength, Min (Applicable if toe ring is not integral part of upper")	-	500	-
Cl. No.8.5, Table no. 6(iv)(Strap to outsole strength)	-	500	-
Cl. No.8.5, Table no. 6(v)("Attachment strength of back strap and Buckle/D-ring ")	-	500	-
Cl. No.8.5, Table no. 6(vi)("Attachment strength of elastic, limit of useful extension, percent")	-	500	-
Cl. No.8.5, Table no. 6(vii)("Attachment strength of back strap and velcro, N, Min (If, present)")	-	500	-
Cl. No.8.5, Table no. 6(viii)("Hydrolysis resistance, Cut growth after 150 000 flexes, mm, Max (Applicable for PU sole only)")	-	1500	-
Cl. No.8.5, Table no. 6(ix)("Heel pull off strength, N, Min (Applicable for heel height 40 mm and above attached separately to the sandal/slipper)")	-	500	-
Cl. No.8.5, Table no. 6(x)("Inter layer bond strength, N/mm, (Applicable for multi-layer sole)")	-	500	-
Cl. No.8.5, Table no. 6(xi)("Slip Resistance, Coefficient of Friction (COF) (Not applicable for leather sole) (To be carried out on quarry tiles)")	-	1500	-
Cl. No.8.("Requirement of Complete Sandal and Slipper (Chemical Requirements) ")	-	500	-
Cl. No.9.(MARKING AND PACKING)	-	300	-
Cl. No.8.6.2(Lead content)	-	2000	-
Cl-5 ((Amendment No-1)(Category And Type)	-	300	-
Cl.8 Table-1 S.No 1, (i) (Amendment No-1)(Bond strength , N/mm, Min)	-	300	-
Cl.8 Table-1 S.No 1, (ii) (Amendment No-1)(Toe post attachment strength)	-	300	-
Cl.8 Table-1 S.No 1, (iii) (Amendment No-1)(Toe ring attachment strength)	-	300	-
Cl.8 Table-1 S.No 1, (iv) (Amendment No-1)(Strap to outsole strength N, Min)	-	300	-
Cl.8 Table-1 S.No 1, (v) (Amendment No-1)(Attachment strength of back strap and buckle/D-ring N, Min)	-	300	-
Cl.8 Table-1 S.No 1, (vi) (Amendment No-1)(Limit of useful extension, percent, Min)	-	300	-
Cl.8 Table-1 S.No 1, (vii) (Amendment No-1)(Attachment strength of back strap and velcro, N, Mi)	-	500	-
Cl.8 Table-1 S.No 1, (viii) (Amendment No-1)(Hydrolysis resistance)	-	500	-
Cl.8 Table-1 S.No 1, (ix) (Amendment No-1)(Heel pull off strength)	-	500	-
Cl.8 Table-1 S.No 1, (x) (Amendment No-1)(Inter layer bond strength)	-	500	-
Cl.8 Table-1 S.No 1, (xi) (Amendment No-1)(Slip resistance, coefficient of friction (COF)3)	-	500	-
Cl.8 Table-1 S.No 1, (xii) (Amendment No-1)(Abrasion resistance, (volume loss) mm3 , Max)	-	500	-
Cl.8 Table-1 S.No 1, (xiii) (Amendment No-1)("Flexing resistance (Belt method or Bennewart flex method)")	-	500	-
Cl.8 Table-1 S.No 1, (xiv) (Amendment No-1)(Chemical Requirements)	-	500	-
Cl.8 Table-1 S.No 1, (xv) (Amendment No-1)(Lead content (as Pb)7 ppm)	-	500	-
Cl.9 Table-2 S.No 1, (i) a (Amendment No-1)(Tear strength for other than moulded upper material)	-	500	-
Cl.9 Table-2 S.No 1, (i) b (Amendment No-1)(Tear strength For all moulded upper material)	-	500	-
Cl.9 Table-2 S.No 1, (ii) (Amendment No-1)(Flexing endurance)	-	500	-
Cl.9 Table-3 S.No 1, (i) (Amendment No-1)(Tear strength, N, Min)	-	500	-
Cl.9 Table-3 S.No 1, (ii) (Amendment No-1)("Abrasion resistance (a) dry condition (b) wet condition")	-	500	-
Cl.9 Table-4 S.No 1, (i) (Amendment No-1)(Tear strength, N, Min)	-	500	-
Cl.9 Table-4 S.No 1, (ii) (Amendment No-1)("Abrasion resistance (a) dry condition (b) wet condition")	-	500	-
Cl.9 Table-5 S.No 1, (i) (Amendment No-1)(Grain crack index)	-	500	-
Cl.9 Table-6 S.No 1, (i) (Amendment No-1)("Density, g/cm3 , Min (a)-Cellular, (b) Solid ")	-	300	-
Cl-10 (Amendment No-1)(Marking)	-	300	-
Cl.9 Table-5 S.No 1, (ii) (Amendment No-1)(Density, g/cm3 , Min)	-	300	-
Cl. No.8.6.1,Table 1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	3000	-
Cl. No.8.6.1,Table 1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	3500	-
Cl. No.8.6.1,Table 1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	3500	-
Cl. No.8.6.1,Table 1 of IS 17011(iv)(Chromium (VI))	-	1000	-
Cl. No.8.6.1,Table 1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	2000	-
Cl. No.8.6.1,Table 1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	1000	-
Cl. No.8.6.1,Table 1 of IS 17011(vii)(Formaldehyde)	-	1000	-
Cl. No.8.6.1,Table 1 of IS 17011(viii)(Organotin compounds)	-	3500	-
Cl. No.8.6.1,Table 1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	3000	-
Cl. No.8.6.1,Table 1 of IS 17011(x)(pH)	-	500	-
Cl. No.8.6.1,Table 1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	4500	-
Cl. No.8.6.1,Table 1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	2000	-
Cl. No.4(SHAPE AND DESIGN)	-	300	-
Cl. No.5("SIZE AND FITTINGS ")	-	300	-
Cl. No.6("CONSTRUCTION ")	-	300	-
Cl. No.7(MATERIAL)	-	300	-
Cl. No.8.1, Table no. 1(i),a("Tear strength, (other than moulded upper material) ")	-	500	-
Cl. No.8.1, Table no. 1(i),b("For all moulded upper material ")	-	500	-
Cl. No.8.1, Table no. 1(ii)(Flexing endurance)	-	800	-
Cl. No.8.2,Table no. 2(i)(Tear strength)	-	500	-
Cl. No.8.2,Table no. 2(ii),a("Abrasion resistance- At dry condition")	-	800	-
Cl. No.8.2,Table no. 2(ii),b("Abrasion resistance- At wet condition")	-	800	-
Cl. No.8.3,Table no. 3(i)(Tear strength)	-	500	-
Cl. No.8.3,Table no. 3(ii),a("Abrasion resistance- At dry condition")	-	800	-
Cl. No.8.3,Table no. 3(ii),b("Abrasion resistance- At wet condition")	-	800	-
Cl. No.8.4,Table no. 4(i)(Grain crack index)	-	300	-
Cl. No.8.4,Table no. 4(ii)(Density)	-	300	-
Cl. No.8.4,Table no. 5(i)(Density)	-	300	-
Cl. No.8.4,Table no. 5(ii)("Abrasion resistance, Volume loss ")	-	800	-
Cl. No.8.4, Table no. 5(iii)("Flexing resistance, At 30 000 flexes")	-	800	-
Cl. No.8.5, Table no. 6(i)("Bond strength, N/mm, Min (Applicable when fore part is fully covered or strap width is more than 25 mm)")	-	500	-
Cl. No.8.5, Table no. 6(ii)("Toe post attachment strength, N, Min (Applicable if toe post is present)")	-	500	-
Cl. No.8.5, Table no. 6(iii)("Toe ring attachment strength, Min (Applicable if toe ring is not integral part of upper")	-	500	-
Cl. No.8.5, Table no. 6(iv)(Strap to outsole strength)	-	500	-
Cl. No.8.5, Table no. 6(v)("Attachment strength of back strap and Buckle/D-ring ")	-	500	-
Cl. No.8.5, Table no. 6(vi)("Attachment strength of elastic, limit of useful extension, percent")	-	500	-
Cl. No.8.5, Table no. 6(vii)("Attachment strength of back strap and velcro, N, Min (If, present)")	-	500	-
Cl. No.8.5, Table no. 6(viii)("Hydrolysis resistance, Cut growth after 150 000 flexes, mm, Max (Applicable for PU sole only)")	-	1500	-
Cl. No.8.5, Table no. 6(ix)("Heel pull off strength, N, Min (Applicable for heel height 40 mm and above attached separately to the sandal/slipper)")	-	500	-
Cl. No.8.5, Table no. 6(x)("Inter layer bond strength, N/mm, (Applicable for multi-layer sole)")	-	500	-
Cl. No.8.5, Table no. 6(xi)("Slip Resistance, Coefficient of Friction (COF) (Not applicable for leather sole) (To be carried out on quarry tiles)")	-	1500	-
Cl. No.8.("Requirement of Complete Sandal and Slipper (Chemical Requirements) ")	-	20000	-
Cl. No.9.(MARKING AND PACKING)	-	300	-
Cl. No.8.6.2(Lead content)	-	1000	-
Cl-5 ((Amendment No-1)(Category And Type)	-	300	-
Cl.8 Table-1 S.No 1, (i) (Amendment No-1)(Bond strength , N/mm, Min)	-	500	-
Cl.8 Table-1 S.No 1, (ii) (Amendment No-1)(Toe post attachment strength)	-	500	-
Cl.8 Table-1 S.No 1, (iii) (Amendment No-1)(Toe ring attachment strength)	-	500	-
Cl.8 Table-1 S.No 1, (iv) (Amendment No-1)(Strap to outsole strength N, Min)	-	500	-
Cl.8 Table-1 S.No 1, (v) (Amendment No-1)(Attachment strength of back strap and buckle/D-ring N, Min)	-	500	-
Cl.8 Table-1 S.No 1, (vi) (Amendment No-1)(Limit of useful extension, percent, Min)	-	500	-
Cl.8 Table-1 S.No 1, (vii) (Amendment No-1)(Attachment strength of back strap and velcro, N, Mi)	-	500	-
Cl.8 Table-1 S.No 1, (viii) (Amendment No-1)(Hydrolysis resistance)	-	1500	-
Cl.8 Table-1 S.No 1, (ix) (Amendment No-1)(Heel pull off strength)	-	500	-
Cl.8 Table-1 S.No 1, (x) (Amendment No-1)(Inter layer bond strength)	-	500	-
Cl.8 Table-1 S.No 1, (xi) (Amendment No-1)(Slip resistance, coefficient of friction (COF)3)	-	1500	-
Cl.8 Table-1 S.No 1, (xii) (Amendment No-1)(Abrasion resistance, (volume loss) mm3 , Max)	-	800	-
Cl.8 Table-1 S.No 1, (xiii) (Amendment No-1)("Flexing resistance (Belt method or Bennewart flex method)")	-	800	-
Cl.8 Table-1 S.No 1, (xiv) (Amendment No-1)(Chemical Requirements)	-	20000	-
Cl.8 Table-1 S.No 1, (xv) (Amendment No-1)(Lead content (as Pb)7 ppm)	-	1000	-
Cl.9 Table-2 S.No 1, (i) a (Amendment No-1)(Tear strength for other than moulded upper material)	-	500	-
Cl.9 Table-2 S.No 1, (i) b (Amendment No-1)(Tear strength For all moulded upper material)	-	500	-
Cl.9 Table-2 S.No 1, (ii) (Amendment No-1)(Flexing endurance)	-	800	-
Cl.9 Table-3 S.No 1, (i) (Amendment No-1)(Tear strength, N, Min)	-	500	-
Cl.9 Table-3 S.No 1, (ii) (Amendment No-1)("Abrasion resistance (a) dry condition (b) wet condition")	-	800	-
Cl.9 Table-4 S.No 1, (i) (Amendment No-1)(Tear strength, N, Min)	-	500	-
Cl.9 Table-4 S.No 1, (ii) (Amendment No-1)("Abrasion resistance (a) dry condition (b) wet condition")	-	800	-
Cl.9 Table-5 S.No 1, (i) (Amendment No-1)(Grain crack index)	-	300	-
Cl.9 Table-6 S.No 1, (i) (Amendment No-1)("Density, g/cm3 , Min (a)-Cellular, (b) Solid ")	-	300	-
Cl-10 (Amendment No-1)(Marking)	-	300	-
Cl.9 Table-5 S.No 1, (ii) (Amendment No-1)(Density, g/cm3 , Min)	-	300	-
Cl.8 - Table No 1 - Sl. No.-xiv(pH- IS 1390:2022)	-	500	-
Cl.8 - Table No 1 - Sl. No.-xv("Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988")	-	1000	-
Cl.8 - Table No 1 - Sl. No.-xiv(pH- IS 1390:2022)	-	500	-
Cl.8 - Table No 1 - Sl. No.-xv("Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988")	-	1000	-
Cl. No.8.6.1,Table 1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	3000	-
Cl. No.8.6.1,Table 1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	3500	-
Cl. No.8.6.1,Table 1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	3500	-
Cl. No.8.6.1,Table 1 of IS 17011(iv)(Chromium (VI))	-	1000	-
Cl. No.8.6.1,Table 1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	2000	-
Cl. No.8.6.1,Table 1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	1000	-
Cl. No.8.6.1,Table 1 of IS 17011(vii)(Formaldehyde)	-	1000	-
Cl. No.8.6.1,Table 1 of IS 17011(viii)(Organotin compounds)	-	3500	-
Cl. No.8.6.1,Table 1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	3500	-
Cl. No.8.6.1,Table 1 of IS 17011(x)(pH)	-	500	-
Cl. No.8.6.1,Table 1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	4500	-
Cl. No.8.6.1,Table 1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	1000	-
Cl. No.4(SHAPE AND DESIGN)	-	300	-
Cl. No.5("SIZE AND FITTINGS ")	-	300	-
Cl. No.6("CONSTRUCTION ")	-	300	-
Cl. No.7(MATERIAL)	-	32600	-
Cl. No.8.1, Table no. 1(i),a("Tear strength, (other than moulded upper material) ")	-	500	-
Cl. No.8.1, Table no. 1(i),b("For all moulded upper material ")	-	500	-
Cl. No.8.1, Table no. 1(ii)(Flexing endurance)	-	800	-
Cl. No.8.2,Table no. 2(i)(Tear strength)	-	500	-
Cl. No.8.2,Table no. 2(ii),a("Abrasion resistance- At dry condition")	-	800	-
Cl. No.8.2,Table no. 2(ii),b("Abrasion resistance- At wet condition")	-	800	-
Cl. No.8.3,Table no. 3(i)(Tear strength)	-	500	-
Cl. No.8.3,Table no. 3(ii),a("Abrasion resistance- At dry condition")	-	800	-
Cl. No.8.3,Table no. 3(ii),b("Abrasion resistance- At wet condition")	-	800	-
Cl. No.8.4,Table no. 4(i)(Grain crack index)	-	300	-
Cl. No.8.4,Table no. 4(ii)(Density)	-	300	-
Cl. No.8.4,Table no. 5(i)(Density)	-	300	-
Cl. No.8.4,Table no. 5(ii)("Abrasion resistance, Volume loss ")	-	800	-
Cl. No.8.4, Table no. 5(iii)("Flexing resistance, At 30 000 flexes")	-	800	-
Cl. No.8.5, Table no. 6(i)("Bond strength, N/mm, Min (Applicable when fore part is fully covered or strap width is more than 25 mm)")	-	500	-
Cl. No.8.5, Table no. 6(ii)("Toe post attachment strength, N, Min (Applicable if toe post is present)")	-	500	-
Cl. No.8.5, Table no. 6(iii)("Toe ring attachment strength, Min (Applicable if toe ring is not integral part of upper")	-	500	-
Cl. No.8.5, Table no. 6(iv)(Strap to outsole strength)	-	500	-
Cl. No.8.5, Table no. 6(v)("Attachment strength of back strap and Buckle/D-ring ")	-	500	-
Cl. No.8.5, Table no. 6(vi)("Attachment strength of elastic, limit of useful extension, percent")	-	500	-
Cl. No.8.5, Table no. 6(vii)("Attachment strength of back strap and velcro, N, Min (If, present)")	-	500	-
Cl. No.8.5, Table no. 6(viii)("Hydrolysis resistance, Cut growth after 150 000 flexes, mm, Max (Applicable for PU sole only)")	-	1500	-
Cl. No.8.5, Table no. 6(ix)("Heel pull off strength, N, Min (Applicable for heel height 40 mm and above attached separately to the sandal/slipper)")	-	500	-
Cl. No.8.5, Table no. 6(x)("Inter layer bond strength, N/mm, (Applicable for multi-layer sole)")	-	500	-
Cl. No.8.5, Table no. 6(xi)("Slip Resistance, Coefficient of Friction (COF) (Not applicable for leather sole) (To be carried out on quarry tiles)")	-	1500	-
Cl. No.8.("Requirement of Complete Sandal and Slipper (Chemical Requirements) ")	-	20000	-
Cl. No.9.(MARKING AND PACKING)	-	300	-
Cl. No.8.6.2(Lead content)	-	1000	-
Cl-5 ((Amendment No-1)(Category And Type)	-	300	-
Cl.8 Table-1 S.No 1, (i) (Amendment No-1)(Bond strength , N/mm, Min)	-	500	-
Cl.8 Table-1 S.No 1, (ii) (Amendment No-1)(Toe post attachment strength)	-	500	-
Cl.8 Table-1 S.No 1, (iii) (Amendment No-1)(Toe ring attachment strength)	-	500	-
Cl.8 Table-1 S.No 1, (iv) (Amendment No-1)(Strap to outsole strength N, Min)	-	500	-
Cl.8 Table-1 S.No 1, (v) (Amendment No-1)(Attachment strength of back strap and buckle/D-ring N, Min)	-	500	-
Cl.8 Table-1 S.No 1, (vi) (Amendment No-1)(Limit of useful extension, percent, Min)	-	500	-
Cl.8 Table-1 S.No 1, (vii) (Amendment No-1)(Attachment strength of back strap and velcro, N, Mi)	-	500	-
Cl.8 Table-1 S.No 1, (viii) (Amendment No-1)(Hydrolysis resistance)	-	1500	-
Cl.8 Table-1 S.No 1, (ix) (Amendment No-1)(Heel pull off strength)	-	500	-
Cl.8 Table-1 S.No 1, (x) (Amendment No-1)(Inter layer bond strength)	-	500	-
Cl.8 Table-1 S.No 1, (xi) (Amendment No-1)(Slip resistance, coefficient of friction (COF)3)	-	1500	-
Cl.8 Table-1 S.No 1, (xii) (Amendment No-1)(Abrasion resistance, (volume loss) mm3 , Max)	-	800	-
Cl.8 Table-1 S.No 1, (xiii) (Amendment No-1)("Flexing resistance (Belt method or Bennewart flex method)")	-	800	-
Cl.8 Table-1 S.No 1, (xiv) (Amendment No-1)(Chemical Requirements)	-	20000	-
Cl.8 Table-1 S.No 1, (xv) (Amendment No-1)(Lead content (as Pb)7 ppm)	-	1000	-
Cl.9 Table-2 S.No 1, (i) a (Amendment No-1)(Tear strength for other than moulded upper material)	-	500	-
Cl.9 Table-2 S.No 1, (i) b (Amendment No-1)(Tear strength For all moulded upper material)	-	500	-
Cl.9 Table-2 S.No 1, (ii) (Amendment No-1)(Flexing endurance)	-	800	-
Cl.9 Table-3 S.No 1, (i) (Amendment No-1)(Tear strength, N, Min)	-	500	-
Cl.9 Table-3 S.No 1, (ii) (Amendment No-1)("Abrasion resistance (a) dry condition (b) wet condition")	-	800	-
Cl.9 Table-4 S.No 1, (i) (Amendment No-1)(Tear strength, N, Min)	-	500	-
Cl.9 Table-4 S.No 1, (ii) (Amendment No-1)("Abrasion resistance (a) dry condition (b) wet condition")	-	800	-
Cl.9 Table-5 S.No 1, (i) (Amendment No-1)(Grain crack index)	-	300	-
Cl.9 Table-6 S.No 1, (i) (Amendment No-1)("Density, g/cm3 , Min (a)-Cellular, (b) Solid ")	-	300	-
Cl-10 (Amendment No-1)(Marking)	-	300	-
Cl.9 Table-5 S.No 1, (ii) (Amendment No-1)(Density, g/cm3 , Min)	-	300	-
Cl.8 - Table No 1 - Sl. No.-xiv(pH- IS 1390:2022)	-	500	-
Cl.8 - Table No 1 - Sl. No.-xv("Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988")	-	1000	-
Cl.8 - Table No 1 - Sl. No.-xiv(pH- IS 1390:2022)	-	500	-
Cl.8 - Table No 1 - Sl. No.-xv("Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988")	-	1000	-
Cl. No.8.6.1,Table 1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	3000	-
Cl. No.8.6.1,Table 1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	3500	-
Cl. No.8.6.1,Table 1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	3500	-
Cl. No.8.6.1,Table 1 of IS 17011(iv)(Chromium (VI))	-	1000	-
Cl. No.8.6.1,Table 1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	2000	-
Cl. No.8.6.1,Table 1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	1000	-
Cl. No.8.6.1,Table 1 of IS 17011(vii)(Formaldehyde)	-	1000	-
Cl. No.8.6.1,Table 1 of IS 17011(viii)(Organotin compounds)	-	3500	-
Cl. No.8.6.1,Table 1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	3000	-
Cl. No.8.6.1,Table 1 of IS 17011(x)(pH)	-	500	-
Cl. No.8.6.1,Table 1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	4500	-
Cl. No.8.6.1,Table 1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	1000	-
Cl. No.4(SHAPE AND DESIGN)	-	3000	-
Cl. No.5("SIZE AND FITTINGS ")	-	300	-
Cl. No.6("CONSTRUCTION ")	-	300	-
Cl. No.7(MATERIAL)	-	300	-
Cl. No.8.1, Table no. 1(i),a("Tear strength, (other than moulded upper material) ")	-	500	-
Cl. No.8.1, Table no. 1(i),b("For all moulded upper material ")	-	300	-
Cl. No.8.1, Table no. 1(ii)(Flexing endurance)	-	800	-
Cl. No.8.2,Table no. 2(i)(Tear strength)	-	500	-
Cl. No.8.2,Table no. 2(ii),a("Abrasion resistance- At dry condition")	-	800	-
Cl. No.8.2,Table no. 2(ii),b("Abrasion resistance- At wet condition")	-	800	-
Cl. No.8.3,Table no. 3(i)(Tear strength)	-	500	-
Cl. No.8.3,Table no. 3(ii),a("Abrasion resistance- At dry condition")	-	800	-
Cl. No.8.3,Table no. 3(ii),b("Abrasion resistance- At wet condition")	-	800	-
Cl. No.8.4,Table no. 4(i)(Grain crack index)	-	300	-
Cl. No.8.4,Table no. 4(ii)(Density)	-	300	-
Cl. No.8.4,Table no. 5(i)(Density)	-	300	-
Cl. No.8.4,Table no. 5(ii)("Abrasion resistance, Volume loss ")	-	800	-
Cl. No.8.4, Table no. 5(iii)("Flexing resistance, At 30 000 flexes")	-	800	-
Cl. No.8.5, Table no. 6(i)("Bond strength, N/mm, Min (Applicable when fore part is fully covered or strap width is more than 25 mm)")	-	500	-
Cl. No.8.5, Table no. 6(ii)("Toe post attachment strength, N, Min (Applicable if toe post is present)")	-	500	-
Cl. No.8.5, Table no. 6(iii)("Toe ring attachment strength, Min (Applicable if toe ring is not integral part of upper")	-	500	-
Cl. No.8.5, Table no. 6(iv)(Strap to outsole strength)	-	500	-
Cl. No.8.5, Table no. 6(v)("Attachment strength of back strap and Buckle/D-ring ")	-	500	-
Cl. No.8.5, Table no. 6(vi)("Attachment strength of elastic, limit of useful extension, percent")	-	500	-
Cl. No.8.5, Table no. 6(vii)("Attachment strength of back strap and velcro, N, Min (If, present)")	-	500	-
Cl. No.8.5, Table no. 6(viii)("Hydrolysis resistance, Cut growth after 150 000 flexes, mm, Max (Applicable for PU sole only)")	-	1500	-
Cl. No.8.5, Table no. 6(ix)("Heel pull off strength, N, Min (Applicable for heel height 40 mm and above attached separately to the sandal/slipper)")	-	500	-
Cl. No.8.5, Table no. 6(x)("Inter layer bond strength, N/mm, (Applicable for multi-layer sole)")	-	500	-
Cl. No.8.5, Table no. 6(xi)("Slip Resistance, Coefficient of Friction (COF) (Not applicable for leather sole) (To be carried out on quarry tiles)")	-	1500	-
Cl. No.8.("Requirement of Complete Sandal and Slipper (Chemical Requirements) ")	-	20000	-
Cl. No.9.(MARKING AND PACKING)	-	500	-
Cl. No.8.6.2(Lead content)	-	1000	-
Cl-5 ((Amendment No-1)(Category And Type)	-	300	-
Cl.8 Table-1 S.No 1, (i) (Amendment No-1)(Bond strength , N/mm, Min)	-	500	-
Cl.8 Table-1 S.No 1, (ii) (Amendment No-1)(Toe post attachment strength)	-	500	-
Cl.8 Table-1 S.No 1, (iii) (Amendment No-1)(Toe ring attachment strength)	-	500	-
Cl.8 Table-1 S.No 1, (iv) (Amendment No-1)(Strap to outsole strength N, Min)	-	500	-
Cl.8 Table-1 S.No 1, (v) (Amendment No-1)(Attachment strength of back strap and buckle/D-ring N, Min)	-	500	-
Cl.8 Table-1 S.No 1, (vi) (Amendment No-1)(Limit of useful extension, percent, Min)	-	500	-
Cl.8 Table-1 S.No 1, (vii) (Amendment No-1)(Attachment strength of back strap and velcro, N, Mi)	-	500	-
Cl.8 Table-1 S.No 1, (viii) (Amendment No-1)(Hydrolysis resistance)	-	1500	-
Cl.8 Table-1 S.No 1, (ix) (Amendment No-1)(Heel pull off strength)	-	500	-
Cl.8 Table-1 S.No 1, (x) (Amendment No-1)(Inter layer bond strength)	-	500	-
Cl.8 Table-1 S.No 1, (xi) (Amendment No-1)(Slip resistance, coefficient of friction (COF)3)	-	1500	-
Cl.8 Table-1 S.No 1, (xii) (Amendment No-1)(Abrasion resistance, (volume loss) mm3 , Max)	-	800	-
Cl.8 Table-1 S.No 1, (xiii) (Amendment No-1)("Flexing resistance (Belt method or Bennewart flex method)")	-	1500	-
Cl.8 Table-1 S.No 1, (xiv) (Amendment No-1)(Chemical Requirements)	-	2000	-
Cl.8 Table-1 S.No 1, (xv) (Amendment No-1)(Lead content (as Pb)7 ppm)	-	1000	-
Cl.9 Table-2 S.No 1, (i) a (Amendment No-1)(Tear strength for other than moulded upper material)	-	500	-
Cl.9 Table-2 S.No 1, (i) b (Amendment No-1)(Tear strength For all moulded upper material)	-	500	-
Cl.9 Table-2 S.No 1, (ii) (Amendment No-1)(Flexing endurance)	-	800	-
Cl.9 Table-3 S.No 1, (i) (Amendment No-1)(Tear strength, N, Min)	-	500	-
Cl.9 Table-3 S.No 1, (ii) (Amendment No-1)("Abrasion resistance (a) dry condition (b) wet condition")	-	800	-
Cl.9 Table-4 S.No 1, (i) (Amendment No-1)(Tear strength, N, Min)	-	500	-
Cl.9 Table-4 S.No 1, (ii) (Amendment No-1)("Abrasion resistance (a) dry condition (b) wet condition")	-	800	-
Cl.9 Table-5 S.No 1, (i) (Amendment No-1)(Grain crack index)	-	300	-
Cl.9 Table-6 S.No 1, (i) (Amendment No-1)("Density, g/cm3 , Min (a)-Cellular, (b) Solid ")	-	300	-
Cl-10 (Amendment No-1)(Marking)	-	300	-
Cl.9 Table-5 S.No 1, (ii) (Amendment No-1)(Density, g/cm3 , Min)	-	300	-
Cl.8 - Table No 1 - Sl. No.-xiv(pH- IS 1390:2022)	-	500	-
Cl.8 - Table No 1 - Sl. No.-xv("Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988")	-	1000	-
Cl.8 - Table No 1 - Sl. No.-xiv(pH- IS 1390:2022)	-	500	-
Cl.8 - Table No 1 - Sl. No.-xv("Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988")	-	1000	-
Cl. No.8.6.1,Table 1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	3000	-
Cl. No.8.6.1,Table 1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	3500	-
Cl. No.8.6.1,Table 1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	3500	-
Cl. No.8.6.1,Table 1 of IS 17011(iv)(Chromium (VI))	-	1000	-
Cl. No.8.6.1,Table 1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	2000	-
Cl. No.8.6.1,Table 1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	1000	-
Cl. No.8.6.1,Table 1 of IS 17011(vii)(Formaldehyde)	-	1000	-
Cl. No.8.6.1,Table 1 of IS 17011(viii)(Organotin compounds)	-	3500	-
Cl. No.8.6.1,Table 1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	3000	-
Cl. No.8.6.1,Table 1 of IS 17011(x)(pH)	-	500	-
Cl. No.8.6.1,Table 1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	4500	-
Cl. No.8.6.1,Table 1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	1000	-
Cl. No.4(SHAPE AND DESIGN)	-	300	-
Cl. No.5("SIZE AND FITTINGS ")	-	300	-
Cl. No.6("CONSTRUCTION ")	-	500	-
Cl. No.7(MATERIAL)	-	1500	-
Cl. No.8.1, Table no. 1(i),a("Tear strength, (other than moulded upper material) ")	-	500	-
Cl. No.8.1, Table no. 1(i),b("For all moulded upper material ")	-	500	-
Cl. No.8.1, Table no. 1(ii)(Flexing endurance)	-	800	-
Cl. No.8.2,Table no. 2(i)(Tear strength)	-	500	-
Cl. No.8.2,Table no. 2(ii),a("Abrasion resistance- At dry condition")	-	800	-
Cl. No.8.2,Table no. 2(ii),b("Abrasion resistance- At wet condition")	-	800	-
Cl. No.8.3,Table no. 3(i)(Tear strength)	-	500	-
Cl. No.8.3,Table no. 3(ii),a("Abrasion resistance- At dry condition")	-	800	-
Cl. No.8.3,Table no. 3(ii),b("Abrasion resistance- At wet condition")	-	800	-
Cl. No.8.4,Table no. 4(i)(Grain crack index)	-	500	-
Cl. No.8.4,Table no. 4(ii)(Density)	-	300	-
Cl. No.8.4,Table no. 5(i)(Density)	-	300	-
Cl. No.8.4,Table no. 5(ii)("Abrasion resistance, Volume loss ")	-	800	-
Cl. No.8.4, Table no. 5(iii)("Flexing resistance, At 30 000 flexes")	-	800	-
Cl. No.8.5, Table no. 6(i)("Bond strength, N/mm, Min (Applicable when fore part is fully covered or strap width is more than 25 mm)")	-	500	-
Cl. No.8.5, Table no. 6(ii)("Toe post attachment strength, N, Min (Applicable if toe post is present)")	-	500	-
Cl. No.8.5, Table no. 6(iii)("Toe ring attachment strength, Min (Applicable if toe ring is not integral part of upper")	-	500	-
Cl. No.8.5, Table no. 6(iv)(Strap to outsole strength)	-	500	-
Cl. No.8.5, Table no. 6(v)("Attachment strength of back strap and Buckle/D-ring ")	-	500	-
Cl. No.8.5, Table no. 6(vi)("Attachment strength of elastic, limit of useful extension, percent")	-	500	-
Cl. No.8.5, Table no. 6(vii)("Attachment strength of back strap and velcro, N, Min (If, present)")	-	500	-
Cl. No.8.5, Table no. 6(viii)("Hydrolysis resistance, Cut growth after 150 000 flexes, mm, Max (Applicable for PU sole only)")	-	1500	-
Cl. No.8.5, Table no. 6(ix)("Heel pull off strength, N, Min (Applicable for heel height 40 mm and above attached separately to the sandal/slipper)")	-	500	-
Cl. No.8.5, Table no. 6(x)("Inter layer bond strength, N/mm, (Applicable for multi-layer sole)")	-	500	-
Cl. No.8.5, Table no. 6(xi)("Slip Resistance, Coefficient of Friction (COF) (Not applicable for leather sole) (To be carried out on quarry tiles)")	-	1500	-
Cl. No.8.("Requirement of Complete Sandal and Slipper (Chemical Requirements) ")	-	20000	-
Cl. No.9.(MARKING AND PACKING)	-	300	-
Cl. No.8.6.2(Lead content)	-	1000	-
Cl-5 ((Amendment No-1)(Category And Type)	-	300	-
Cl.8 Table-1 S.No 1, (i) (Amendment No-1)(Bond strength , N/mm, Min)	-	500	-
Cl.8 Table-1 S.No 1, (ii) (Amendment No-1)(Toe post attachment strength)	-	500	-
Cl.8 Table-1 S.No 1, (iii) (Amendment No-1)(Toe ring attachment strength)	-	500	-
Cl.8 Table-1 S.No 1, (iv) (Amendment No-1)(Strap to outsole strength N, Min)	-	500	-
Cl.8 Table-1 S.No 1, (v) (Amendment No-1)(Attachment strength of back strap and buckle/D-ring N, Min)	-	500	-
Cl.8 Table-1 S.No 1, (vi) (Amendment No-1)(Limit of useful extension, percent, Min)	-	500	-
Cl.8 Table-1 S.No 1, (vii) (Amendment No-1)(Attachment strength of back strap and velcro, N, Mi)	-	500	-
Cl.8 Table-1 S.No 1, (viii) (Amendment No-1)(Hydrolysis resistance)	-	1500	-
Cl.8 Table-1 S.No 1, (ix) (Amendment No-1)(Heel pull off strength)	-	500	-
Cl.8 Table-1 S.No 1, (x) (Amendment No-1)(Inter layer bond strength)	-	500	-
Cl.8 Table-1 S.No 1, (xi) (Amendment No-1)(Slip resistance, coefficient of friction (COF)3)	-	1500	-
Cl.8 Table-1 S.No 1, (xii) (Amendment No-1)(Abrasion resistance, (volume loss) mm3 , Max)	-	800	-
Cl.8 Table-1 S.No 1, (xiii) (Amendment No-1)("Flexing resistance (Belt method or Bennewart flex method)")	-	800	-
Cl.8 Table-1 S.No 1, (xiv) (Amendment No-1)(Chemical Requirements)	-	20000	-
Cl.8 Table-1 S.No 1, (xv) (Amendment No-1)(Lead content (as Pb)7 ppm)	-	1000	-
Cl.9 Table-2 S.No 1, (i) a (Amendment No-1)(Tear strength for other than moulded upper material)	-	500	-
Cl.9 Table-2 S.No 1, (i) b (Amendment No-1)(Tear strength For all moulded upper material)	-	500	-
Cl.9 Table-2 S.No 1, (ii) (Amendment No-1)(Flexing endurance)	-	800	-
Cl.9 Table-3 S.No 1, (i) (Amendment No-1)(Tear strength, N, Min)	-	500	-
Cl.9 Table-3 S.No 1, (ii) (Amendment No-1)("Abrasion resistance (a) dry condition (b) wet condition")	-	800	-
Cl.9 Table-4 S.No 1, (i) (Amendment No-1)(Tear strength, N, Min)	-	500	-
Cl.9 Table-4 S.No 1, (ii) (Amendment No-1)("Abrasion resistance (a) dry condition (b) wet condition")	-	800	-
Cl.9 Table-5 S.No 1, (i) (Amendment No-1)(Grain crack index)	-	300	-
Cl.9 Table-6 S.No 1, (i) (Amendment No-1)("Density, g/cm3 , Min (a)-Cellular, (b) Solid ")	-	300	-
Cl-10 (Amendment No-1)(Marking)	-	300	-
Cl.9 Table-5 S.No 1, (ii) (Amendment No-1)(Density, g/cm3 , Min)	-	300	-
Cl.8 - Table No 1 - Sl. No.-xiv(pH- IS 1390:2022)	-	500	-
Cl.8 - Table No 1 - Sl. No.-xv("Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988")	-	1000	-
Cl.8 - Table No 1 - Sl. No.-xiv(pH- IS 1390:2022)	-	500	-
Cl.8 - Table No 1 - Sl. No.-xv("Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988")	-	1000	-
Cl. No.8.6.1,Table 1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	3000	-
Cl. No.8.6.1,Table 1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	3500	-
Cl. No.8.6.1,Table 1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	3500	-
Cl. No.8.6.1,Table 1 of IS 17011(iv)(Chromium (VI))	-	1000	-
Cl. No.8.6.1,Table 1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	2000	-
Cl. No.8.6.1,Table 1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	1000	-
Cl. No.8.6.1,Table 1 of IS 17011(vii)(Formaldehyde)	-	1000	-
Cl. No.8.6.1,Table 1 of IS 17011(viii)(Organotin compounds)	-	3500	-
Cl. No.8.6.1,Table 1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	3500	-
Cl. No.8.6.1,Table 1 of IS 17011(x)(pH)	-	500	-
Cl. No.8.6.1,Table 1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	4500	-
Cl. No.8.6.1,Table 1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	1000	-
Cl. No.4(SHAPE AND DESIGN)	-	300	-
Cl. No.5("SIZE AND FITTINGS ")	-	300	-
Cl. No.6("CONSTRUCTION ")	-	300	-
Cl. No.7(MATERIAL)	-	300	-
Cl. No.8.1, Table no. 1(i),a("Tear strength, (other than moulded upper material) ")	-	500	-
Cl. No.8.1, Table no. 1(i),b("For all moulded upper material ")	-	500	-
Cl. No.8.1, Table no. 1(ii)(Flexing endurance)	-	800	-
Cl. No.8.2,Table no. 2(i)(Tear strength)	-	500	-
Cl. No.8.2,Table no. 2(ii),a("Abrasion resistance- At dry condition")	-	800	-
Cl. No.8.2,Table no. 2(ii),b("Abrasion resistance- At wet condition")	-	800	-
Cl. No.8.3,Table no. 3(i)(Tear strength)	-	500	-
Cl. No.8.3,Table no. 3(ii),a("Abrasion resistance- At dry condition")	-	800	-
Cl. No.8.3,Table no. 3(ii),b("Abrasion resistance- At wet condition")	-	800	-
Cl. No.8.4,Table no. 4(i)(Grain crack index)	-	300	-
Cl. No.8.4,Table no. 4(ii)(Density)	-	300	-
Cl. No.8.4,Table no. 5(i)(Density)	-	300	-
Cl. No.8.4,Table no. 5(ii)("Abrasion resistance, Volume loss ")	-	800	-
Cl. No.8.4, Table no. 5(iii)("Flexing resistance, At 30 000 flexes")	-	800	-
Cl. No.8.5, Table no. 6(i)("Bond strength, N/mm, Min (Applicable when fore part is fully covered or strap width is more than 25 mm)")	-	500	-
Cl. No.8.5, Table no. 6(ii)("Toe post attachment strength, N, Min (Applicable if toe post is present)")	-	500	-
Cl. No.8.5, Table no. 6(iii)("Toe ring attachment strength, Min (Applicable if toe ring is not integral part of upper")	-	500	-
Cl. No.8.5, Table no. 6(iv)(Strap to outsole strength)	-	500	-
Cl. No.8.5, Table no. 6(v)("Attachment strength of back strap and Buckle/D-ring ")	-	500	-
Cl. No.8.5, Table no. 6(vi)("Attachment strength of elastic, limit of useful extension, percent")	-	500	-
Cl. No.8.5, Table no. 6(vii)("Attachment strength of back strap and velcro, N, Min (If, present)")	-	500	-
Cl. No.8.5, Table no. 6(viii)("Hydrolysis resistance, Cut growth after 150 000 flexes, mm, Max (Applicable for PU sole only)")	-	1500	-
Cl. No.8.5, Table no. 6(ix)("Heel pull off strength, N, Min (Applicable for heel height 40 mm and above attached separately to the sandal/slipper)")	-	500	-
Cl. No.8.5, Table no. 6(x)("Inter layer bond strength, N/mm, (Applicable for multi-layer sole)")	-	500	-
Cl. No.8.5, Table no. 6(xi)("Slip Resistance, Coefficient of Friction (COF) (Not applicable for leather sole) (To be carried out on quarry tiles)")	-	1500	-
Cl. No.8.("Requirement of Complete Sandal and Slipper (Chemical Requirements) ")	-	20000	-
Cl. No.9.(MARKING AND PACKING)	-	300	-
Cl. No.8.6.2(Lead content)	-	1000	-
Cl-5 ((Amendment No-1)(Category And Type)	-	300	-
Cl.8 Table-1 S.No 1, (i) (Amendment No-1)(Bond strength , N/mm, Min)	-	500	-
Cl.8 Table-1 S.No 1, (ii) (Amendment No-1)(Toe post attachment strength)	-	500	-
Cl.8 Table-1 S.No 1, (iii) (Amendment No-1)(Toe ring attachment strength)	-	500	-
Cl.8 Table-1 S.No 1, (iv) (Amendment No-1)(Strap to outsole strength N, Min)	-	500	-
Cl.8 Table-1 S.No 1, (v) (Amendment No-1)(Attachment strength of back strap and buckle/D-ring N, Min)	-	500	-
Cl.8 Table-1 S.No 1, (vi) (Amendment No-1)(Limit of useful extension, percent, Min)	-	500	-
Cl.8 Table-1 S.No 1, (vii) (Amendment No-1)(Attachment strength of back strap and velcro, N, Mi)	-	500	-
Cl.8 Table-1 S.No 1, (viii) (Amendment No-1)(Hydrolysis resistance)	-	1500	-
Cl.8 Table-1 S.No 1, (ix) (Amendment No-1)(Heel pull off strength)	-	500	-
Cl.8 Table-1 S.No 1, (x) (Amendment No-1)(Inter layer bond strength)	-	500	-
Cl.8 Table-1 S.No 1, (xi) (Amendment No-1)(Slip resistance, coefficient of friction (COF)3)	-	1500	-
Cl.8 Table-1 S.No 1, (xii) (Amendment No-1)(Abrasion resistance, (volume loss) mm3 , Max)	-	800	-
Cl.8 Table-1 S.No 1, (xiii) (Amendment No-1)("Flexing resistance (Belt method or Bennewart flex method)")	-	1500	-
Cl.8 Table-1 S.No 1, (xiv) (Amendment No-1)(Chemical Requirements)	-	20000	-
Cl.8 Table-1 S.No 1, (xv) (Amendment No-1)(Lead content (as Pb)7 ppm)	-	1000	-
Cl.9 Table-2 S.No 1, (i) a (Amendment No-1)(Tear strength for other than moulded upper material)	-	500	-
Cl.9 Table-2 S.No 1, (i) b (Amendment No-1)(Tear strength For all moulded upper material)	-	500	-
Cl.9 Table-2 S.No 1, (ii) (Amendment No-1)(Flexing endurance)	-	800	-
Cl.9 Table-3 S.No 1, (i) (Amendment No-1)(Tear strength, N, Min)	-	500	-
Cl.9 Table-3 S.No 1, (ii) (Amendment No-1)("Abrasion resistance (a) dry condition (b) wet condition")	-	800	-
Cl.9 Table-4 S.No 1, (i) (Amendment No-1)(Tear strength, N, Min)	-	500	-
Cl.9 Table-4 S.No 1, (ii) (Amendment No-1)("Abrasion resistance (a) dry condition (b) wet condition")	-	800	-
Cl.9 Table-5 S.No 1, (i) (Amendment No-1)(Grain crack index)	-	300	-
Cl.9 Table-6 S.No 1, (i) (Amendment No-1)("Density, g/cm3 , Min (a)-Cellular, (b) Solid ")	-	300	-
Cl-10 (Amendment No-1)(Marking)	-	300	-
Cl.9 Table-5 S.No 1, (ii) (Amendment No-1)(Density, g/cm3 , Min)	-	300	-
Cl.8 - Table No 1 - Sl. No.-xiv(pH- IS 1390:2022)	-	500	-
Cl.8 - Table No 1 - Sl. No.-xv("Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988")	-	1000	-
Cl.8 - Table No 1 - Sl. No.-xiv(pH- IS 1390:2022)	-	500	-
Cl.8 - Table No 1 - Sl. No.-xv("Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988")	-	1000	-
Cl. No.8.6.1,Table 1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	3000	-
Cl. No.8.6.1,Table 1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	3000	-
Cl. No.8.6.1,Table 1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	3000	-
Cl. No.8.6.1,Table 1 of IS 17011(iv)(Chromium (VI))	-	1000	-
Cl. No.8.6.1,Table 1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	2000	-
Cl. No.8.6.1,Table 1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	2000	-
Cl. No.8.6.1,Table 1 of IS 17011(vii)(Formaldehyde)	-	2000	-
Cl. No.8.6.1,Table 1 of IS 17011(viii)(Organotin compounds)	-	3500	-
Cl. No.8.6.1,Table 1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	3500	-
Cl. No.8.6.1,Table 1 of IS 17011(x)(pH)	-	500	-
Cl. No.8.6.1,Table 1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	4500	-
Cl. No.8.6.1,Table 1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	1000	-
Cl. No.4(SHAPE AND DESIGN)	-	300	-
Cl. No.5("SIZE AND FITTINGS ")	-	300	-
Cl. No.6("CONSTRUCTION ")	-	300	-
Cl. No.7(MATERIAL)	-	300	-
Cl. No.8.1, Table no. 1(i),a("Tear strength, (other than moulded upper material) ")	-	500	-
Cl. No.8.1, Table no. 1(i),b("For all moulded upper material ")	-	500	-
Cl. No.8.1, Table no. 1(ii)(Flexing endurance)	-	800	-
Cl. No.8.2,Table no. 2(i)(Tear strength)	-	500	-
Cl. No.8.2,Table no. 2(ii),a("Abrasion resistance- At dry condition")	-	800	-
Cl. No.8.2,Table no. 2(ii),b("Abrasion resistance- At wet condition")	-	800	-
Cl. No.8.3,Table no. 3(i)(Tear strength)	-	500	-
Cl. No.8.3,Table no. 3(ii),a("Abrasion resistance- At dry condition")	-	800	-
Cl. No.8.3,Table no. 3(ii),b("Abrasion resistance- At wet condition")	-	800	-
Cl. No.8.4,Table no. 4(i)(Grain crack index)	-	300	-
Cl. No.8.4,Table no. 4(ii)(Density)	-	300	-
Cl. No.8.4,Table no. 5(i)(Density)	-	300	-
Cl. No.8.4,Table no. 5(ii)("Abrasion resistance, Volume loss ")	-	800	-
Cl. No.8.4, Table no. 5(iii)("Flexing resistance, At 30 000 flexes")	-	1500	-
Cl. No.8.5, Table no. 6(i)("Bond strength, N/mm, Min (Applicable when fore part is fully covered or strap width is more than 25 mm)")	-	500	-
Cl. No.8.5, Table no. 6(ii)("Toe post attachment strength, N, Min (Applicable if toe post is present)")	-	500	-
Cl. No.8.5, Table no. 6(iii)("Toe ring attachment strength, Min (Applicable if toe ring is not integral part of upper")	-	500	-
Cl. No.8.5, Table no. 6(iv)(Strap to outsole strength)	-	500	-
Cl. No.8.5, Table no. 6(v)("Attachment strength of back strap and Buckle/D-ring ")	-	500	-
Cl. No.8.5, Table no. 6(vi)("Attachment strength of elastic, limit of useful extension, percent")	-	500	-
Cl. No.8.5, Table no. 6(vii)("Attachment strength of back strap and velcro, N, Min (If, present)")	-	500	-
Cl. No.8.5, Table no. 6(viii)("Hydrolysis resistance, Cut growth after 150 000 flexes, mm, Max (Applicable for PU sole only)")	-	1500	-
Cl. No.8.5, Table no. 6(ix)("Heel pull off strength, N, Min (Applicable for heel height 40 mm and above attached separately to the sandal/slipper)")	-	500	-
Cl. No.8.5, Table no. 6(x)("Inter layer bond strength, N/mm, (Applicable for multi-layer sole)")	-	500	-
Cl. No.8.5, Table no. 6(xi)("Slip Resistance, Coefficient of Friction (COF) (Not applicable for leather sole) (To be carried out on quarry tiles)")	-	1500	-
Cl. No.8.("Requirement of Complete Sandal and Slipper (Chemical Requirements) ")	-	500	-
Cl. No.9.(MARKING AND PACKING)	-	300	-
Cl. No.8.6.2(Lead content)	-	1000	-
Cl-5 ((Amendment No-1)(Category And Type)	-	300	-
Cl.8 Table-1 S.No 1, (i) (Amendment No-1)(Bond strength , N/mm, Min)	-	500	-
Cl.8 Table-1 S.No 1, (ii) (Amendment No-1)(Toe post attachment strength)	-	500	-
Cl.8 Table-1 S.No 1, (iii) (Amendment No-1)(Toe ring attachment strength)	-	500	-
Cl.8 Table-1 S.No 1, (iv) (Amendment No-1)(Strap to outsole strength N, Min)	-	500	-
Cl.8 Table-1 S.No 1, (v) (Amendment No-1)(Attachment strength of back strap and buckle/D-ring N, Min)	-	500	-
Cl.8 Table-1 S.No 1, (vi) (Amendment No-1)(Limit of useful extension, percent, Min)	-	500	-
Cl.8 Table-1 S.No 1, (vii) (Amendment No-1)(Attachment strength of back strap and velcro, N, Mi)	-	500	-
Cl.8 Table-1 S.No 1, (viii) (Amendment No-1)(Hydrolysis resistance)	-	1500	-
Cl.8 Table-1 S.No 1, (ix) (Amendment No-1)(Heel pull off strength)	-	500	-
Cl.8 Table-1 S.No 1, (x) (Amendment No-1)(Inter layer bond strength)	-	500	-
Cl.8 Table-1 S.No 1, (xi) (Amendment No-1)(Slip resistance, coefficient of friction (COF)3)	-	1500	-
Cl.8 Table-1 S.No 1, (xii) (Amendment No-1)(Abrasion resistance, (volume loss) mm3 , Max)	-	800	-
Cl.8 Table-1 S.No 1, (xiii) (Amendment No-1)("Flexing resistance (Belt method or Bennewart flex method)")	-	1500	-
Cl.8 Table-1 S.No 1, (xiv) (Amendment No-1)(Chemical Requirements)	-	20000	-
Cl.8 Table-1 S.No 1, (xv) (Amendment No-1)(Lead content (as Pb)7 ppm)	-	1000	-
Cl.9 Table-2 S.No 1, (i) a (Amendment No-1)(Tear strength for other than moulded upper material)	-	500	-
Cl.9 Table-2 S.No 1, (i) b (Amendment No-1)(Tear strength For all moulded upper material)	-	500	-
Cl.9 Table-2 S.No 1, (ii) (Amendment No-1)(Flexing endurance)	-	1500	-
Cl.9 Table-3 S.No 1, (i) (Amendment No-1)(Tear strength, N, Min)	-	500	-
Cl.9 Table-3 S.No 1, (ii) (Amendment No-1)("Abrasion resistance (a) dry condition (b) wet condition")	-	800	-
Cl.9 Table-4 S.No 1, (i) (Amendment No-1)(Tear strength, N, Min)	-	500	-
Cl.9 Table-4 S.No 1, (ii) (Amendment No-1)("Abrasion resistance (a) dry condition (b) wet condition")	-	800	-
Cl.9 Table-5 S.No 1, (i) (Amendment No-1)(Grain crack index)	-	300	-
Cl.9 Table-6 S.No 1, (i) (Amendment No-1)("Density, g/cm3 , Min (a)-Cellular, (b) Solid ")	-	300	-
Cl-10 (Amendment No-1)(Marking)	-	300	-
Cl.9 Table-5 S.No 1, (ii) (Amendment No-1)(Density, g/cm3 , Min)	-	300	-
Cl.8 - Table No 1 - Sl. No.-xiv(pH- IS 1390:2022)	-	500	-
Cl.8 - Table No 1 - Sl. No.-xv("Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988")	-	1000	-
Cl.8 - Table No 1 - Sl. No.-xiv(pH- IS 1390:2022)	-	500	-
Cl.8 - Table No 1 - Sl. No.-xv("Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988")	-	1000	-
Cl. No.8.6.1,Table 1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	3000	-
Cl. No.8.6.1,Table 1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	3500	-
Cl. No.8.6.1,Table 1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	3500	-
Cl. No.8.6.1,Table 1 of IS 17011(iv)(Chromium (VI))	-	1000	-
Cl. No.8.6.1,Table 1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	1000	-
Cl. No.8.6.1,Table 1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	1500	-
Cl. No.8.6.1,Table 1 of IS 17011(vii)(Formaldehyde)	-	1000	-
Cl. No.8.6.1,Table 1 of IS 17011(viii)(Organotin compounds)	-	3500	-
Cl. No.8.6.1,Table 1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	3000	-
Cl. No.8.6.1,Table 1 of IS 17011(x)(pH)	-	500	-
Cl. No.8.6.1,Table 1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	4500	-
Cl. No.8.6.1,Table 1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	1000	-
Cl. No.4(SHAPE AND DESIGN)	-	300	-
Cl. No.5("SIZE AND FITTINGS ")	-	300	-
Cl. No.6("CONSTRUCTION ")	-	300	-
Cl. No.7(MATERIAL)	-	300	-
Cl. No.8.1, Table no. 1(i),a("Tear strength, (other than moulded upper material) ")	-	500	-
Cl. No.8.1, Table no. 1(i),b("For all moulded upper material ")	-	500	-
Cl. No.8.1, Table no. 1(ii)(Flexing endurance)	-	800	-
Cl. No.8.2,Table no. 2(i)(Tear strength)	-	500	-
Cl. No.8.2,Table no. 2(ii),a("Abrasion resistance- At dry condition")	-	800	-
Cl. No.8.2,Table no. 2(ii),b("Abrasion resistance- At wet condition")	-	800	-
Cl. No.8.3,Table no. 3(i)(Tear strength)	-	500	-
Cl. No.8.3,Table no. 3(ii),a("Abrasion resistance- At dry condition")	-	800	-
Cl. No.8.3,Table no. 3(ii),b("Abrasion resistance- At wet condition")	-	800	-
Cl. No.8.4,Table no. 4(i)(Grain crack index)	-	300	-
Cl. No.8.4,Table no. 4(ii)(Density)	-	300	-
Cl. No.8.4,Table no. 5(i)(Density)	-	300	-
Cl. No.8.4,Table no. 5(ii)("Abrasion resistance, Volume loss ")	-	800	-
Cl. No.8.4, Table no. 5(iii)("Flexing resistance, At 30 000 flexes")	-	800	-
Cl. No.8.5, Table no. 6(i)("Bond strength, N/mm, Min (Applicable when fore part is fully covered or strap width is more than 25 mm)")	-	500	-
Cl. No.8.5, Table no. 6(ii)("Toe post attachment strength, N, Min (Applicable if toe post is present)")	-	500	-
Cl. No.8.5, Table no. 6(iii)("Toe ring attachment strength, Min (Applicable if toe ring is not integral part of upper")	-	500	-
Cl. No.8.5, Table no. 6(iv)(Strap to outsole strength)	-	500	-
Cl. No.8.5, Table no. 6(v)("Attachment strength of back strap and Buckle/D-ring ")	-	500	-
Cl. No.8.5, Table no. 6(vi)("Attachment strength of elastic, limit of useful extension, percent")	-	500	-
Cl. No.8.5, Table no. 6(vii)("Attachment strength of back strap and velcro, N, Min (If, present)")	-	500	-
Cl. No.8.5, Table no. 6(viii)("Hydrolysis resistance, Cut growth after 150 000 flexes, mm, Max (Applicable for PU sole only)")	-	1500	-
Cl. No.8.5, Table no. 6(ix)("Heel pull off strength, N, Min (Applicable for heel height 40 mm and above attached separately to the sandal/slipper)")	-	500	-
Cl. No.8.5, Table no. 6(x)("Inter layer bond strength, N/mm, (Applicable for multi-layer sole)")	-	500	-
Cl. No.8.5, Table no. 6(xi)("Slip Resistance, Coefficient of Friction (COF) (Not applicable for leather sole) (To be carried out on quarry tiles)")	-	1500	-
Cl. No.8.("Requirement of Complete Sandal and Slipper (Chemical Requirements) ")	-	20000	-
Cl. No.9.(MARKING AND PACKING)	-	300	-
Cl. No.8.6.2(Lead content)	-	1000	-
Cl-5 ((Amendment No-1)(Category And Type)	-	300	-
Cl.8 Table-1 S.No 1, (i) (Amendment No-1)(Bond strength , N/mm, Min)	-	500	-
Cl.8 Table-1 S.No 1, (ii) (Amendment No-1)(Toe post attachment strength)	-	500	-
Cl.8 Table-1 S.No 1, (iii) (Amendment No-1)(Toe ring attachment strength)	-	500	-
Cl.8 Table-1 S.No 1, (iv) (Amendment No-1)(Strap to outsole strength N, Min)	-	500	-
Cl.8 Table-1 S.No 1, (v) (Amendment No-1)(Attachment strength of back strap and buckle/D-ring N, Min)	-	500	-
Cl.8 Table-1 S.No 1, (vi) (Amendment No-1)(Limit of useful extension, percent, Min)	-	500	-
Cl.8 Table-1 S.No 1, (vii) (Amendment No-1)(Attachment strength of back strap and velcro, N, Mi)	-	500	-
Cl.8 Table-1 S.No 1, (viii) (Amendment No-1)(Hydrolysis resistance)	-	1500	-
Cl.8 Table-1 S.No 1, (ix) (Amendment No-1)(Heel pull off strength)	-	500	-
Cl.8 Table-1 S.No 1, (x) (Amendment No-1)(Inter layer bond strength)	-	500	-
Cl.8 Table-1 S.No 1, (xi) (Amendment No-1)(Slip resistance, coefficient of friction (COF)3)	-	1500	-
Cl.8 Table-1 S.No 1, (xii) (Amendment No-1)(Abrasion resistance, (volume loss) mm3 , Max)	-	800	-
Cl.8 Table-1 S.No 1, (xiii) (Amendment No-1)("Flexing resistance (Belt method or Bennewart flex method)")	-	1500	-
Cl.8 Table-1 S.No 1, (xiv) (Amendment No-1)(Chemical Requirements)	-	20000	-
Cl.8 Table-1 S.No 1, (xv) (Amendment No-1)(Lead content (as Pb)7 ppm)	-	1000	-
Cl.9 Table-2 S.No 1, (i) a (Amendment No-1)(Tear strength for other than moulded upper material)	-	500	-
Cl.9 Table-2 S.No 1, (i) b (Amendment No-1)(Tear strength For all moulded upper material)	-	300	-
Cl.9 Table-2 S.No 1, (ii) (Amendment No-1)(Flexing endurance)	-	800	-
Cl.9 Table-3 S.No 1, (i) (Amendment No-1)(Tear strength, N, Min)	-	500	-
Cl.9 Table-3 S.No 1, (ii) (Amendment No-1)("Abrasion resistance (a) dry condition (b) wet condition")	-	800	-
Cl.9 Table-4 S.No 1, (i) (Amendment No-1)(Tear strength, N, Min)	-	500	-
Cl.9 Table-4 S.No 1, (ii) (Amendment No-1)("Abrasion resistance (a) dry condition (b) wet condition")	-	500	-
Cl.9 Table-5 S.No 1, (i) (Amendment No-1)(Grain crack index)	-	500	-
Cl.9 Table-6 S.No 1, (i) (Amendment No-1)("Density, g/cm3 , Min (a)-Cellular, (b) Solid ")	-	500	-
Cl-10 (Amendment No-1)(Marking)	-	500	-
Cl.9 Table-5 S.No 1, (ii) (Amendment No-1)(Density, g/cm3 , Min)	-	300	-
Cl.8 - Table No 1 - Sl. No.-xiv(pH- IS 1390:2022)	-	500	-
Cl.8 - Table No 1 - Sl. No.-xv("Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988")	-	1000	-
Cl.8 - Table No 1 - Sl. No.-xiv(pH- IS 1390:2022)	-	500	-
Cl.8 - Table No 1 - Sl. No.-xv("Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988")	-	1000	-
Cl. No.8.4,Table no. 4(iii)(Abrasion resistance)	-	800	-
Cl.9 Table-5 S.No 1, (iii) (Amendment No-1)(Abrasion resistance, mm/kcs)	-	800	-
Cl. No.8.6.1,Table 1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	3000	-
Cl. No.8.6.1,Table 1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	3500	-
Cl. No.8.6.1,Table 1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	3500	-
Cl. No.8.6.1,Table 1 of IS 17011(iv)(Chromium (VI))	-	1000	-
Cl. No.8.6.1,Table 1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	2000	-
Cl. No.8.6.1,Table 1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	1000	-
Cl. No.8.6.1,Table 1 of IS 17011(vii)(Formaldehyde)	-	1000	-
Cl. No.8.6.1,Table 1 of IS 17011(viii)(Organotin compounds)	-	3500	-
Cl. No.8.6.1,Table 1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	3500	-
Cl. No.8.6.1,Table 1 of IS 17011(x)(pH)	-	500	-
Cl. No.8.6.1,Table 1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	2000	-
Cl. No.8.6.1,Table 1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	1000	-
Cl. No.4(SHAPE AND DESIGN)	-	300	-
Cl. No.5("SIZE AND FITTINGS ")	-	300	-
Cl. No.6("CONSTRUCTION ")	-	300	-
Cl. No.7(MATERIAL)	-	500	-
Cl. No.8.1, Table no. 1(i),a("Tear strength, (other than moulded upper material) ")	-	500	-
Cl. No.8.1, Table no. 1(i),b("For all moulded upper material ")	-	500	-
Cl. No.8.1, Table no. 1(ii)(Flexing endurance)	-	800	-
Cl. No.8.2,Table no. 2(i)(Tear strength)	-	500	-
Cl. No.8.2,Table no. 2(ii),a("Abrasion resistance- At dry condition")	-	800	-
Cl. No.8.2,Table no. 2(ii),b("Abrasion resistance- At wet condition")	-	800	-
Cl. No.8.3,Table no. 3(i)(Tear strength)	-	500	-
Cl. No.8.3,Table no. 3(ii),a("Abrasion resistance- At dry condition")	-	800	-
Cl. No.8.3,Table no. 3(ii),b("Abrasion resistance- At wet condition")	-	800	-
Cl. No.8.4,Table no. 4(i)(Grain crack index)	-	300	-
Cl. No.8.4,Table no. 4(ii)(Density)	-	300	-
Cl. No.8.4,Table no. 5(i)(Density)	-	300	-
Cl. No.8.4,Table no. 5(ii)("Abrasion resistance, Volume loss ")	-	800	-
Cl. No.8.4, Table no. 5(iii)("Flexing resistance, At 30 000 flexes")	-	1500	-
Cl. No.8.5, Table no. 6(i)("Bond strength, N/mm, Min (Applicable when fore part is fully covered or strap width is more than 25 mm)")	-	500	-
Cl. No.8.5, Table no. 6(ii)("Toe post attachment strength, N, Min (Applicable if toe post is present)")	-	500	-
Cl. No.8.5, Table no. 6(iii)("Toe ring attachment strength, Min (Applicable if toe ring is not integral part of upper")	-	500	-
Cl. No.8.5, Table no. 6(iv)(Strap to outsole strength)	-	500	-
Cl. No.8.5, Table no. 6(v)("Attachment strength of back strap and Buckle/D-ring ")	-	500	-
Cl. No.8.5, Table no. 6(vi)("Attachment strength of elastic, limit of useful extension, percent")	-	500	-
Cl. No.8.5, Table no. 6(vii)("Attachment strength of back strap and velcro, N, Min (If, present)")	-	500	-
Cl. No.8.5, Table no. 6(viii)("Hydrolysis resistance, Cut growth after 150 000 flexes, mm, Max (Applicable for PU sole only)")	-	1500	-
Cl. No.8.5, Table no. 6(ix)("Heel pull off strength, N, Min (Applicable for heel height 40 mm and above attached separately to the sandal/slipper)")	-	500	-
Cl. No.8.5, Table no. 6(x)("Inter layer bond strength, N/mm, (Applicable for multi-layer sole)")	-	500	-
Cl. No.8.5, Table no. 6(xi)("Slip Resistance, Coefficient of Friction (COF) (Not applicable for leather sole) (To be carried out on quarry tiles)")	-	1500	-
Cl. No.8.("Requirement of Complete Sandal and Slipper (Chemical Requirements) ")	-	500	-
Cl. No.9.(MARKING AND PACKING)	-	300	-
Cl. No.8.6.2(Lead content)	-	1000	-
Cl-5 ((Amendment No-1)(Category And Type)	-	300	-
Cl.8 Table-1 S.No 1, (i) (Amendment No-1)(Bond strength , N/mm, Min)	-	500	-
Cl.8 Table-1 S.No 1, (ii) (Amendment No-1)(Toe post attachment strength)	-	500	-
Cl.8 Table-1 S.No 1, (iii) (Amendment No-1)(Toe ring attachment strength)	-	500	-
Cl.8 Table-1 S.No 1, (iv) (Amendment No-1)(Strap to outsole strength N, Min)	-	500	-
Cl.8 Table-1 S.No 1, (v) (Amendment No-1)(Attachment strength of back strap and buckle/D-ring N, Min)	-	500	-
Cl.8 Table-1 S.No 1, (vi) (Amendment No-1)(Limit of useful extension, percent, Min)	-	500	-
Cl.8 Table-1 S.No 1, (vii) (Amendment No-1)(Attachment strength of back strap and velcro, N, Mi)	-	500	-
Cl.8 Table-1 S.No 1, (viii) (Amendment No-1)(Hydrolysis resistance)	-	1500	-
Cl.8 Table-1 S.No 1, (ix) (Amendment No-1)(Heel pull off strength)	-	500	-
Cl.8 Table-1 S.No 1, (x) (Amendment No-1)(Inter layer bond strength)	-	500	-
Cl.8 Table-1 S.No 1, (xi) (Amendment No-1)(Slip resistance, coefficient of friction (COF)3)	-	1500	-
Cl.8 Table-1 S.No 1, (xii) (Amendment No-1)(Abrasion resistance, (volume loss) mm3 , Max)	-	800	-
Cl.8 Table-1 S.No 1, (xiii) (Amendment No-1)("Flexing resistance (Belt method or Bennewart flex method)")	-	800	-
Cl.8 Table-1 S.No 1, (xiv) (Amendment No-1)(Chemical Requirements)	-	2000	-
Cl.8 Table-1 S.No 1, (xv) (Amendment No-1)(Lead content (as Pb)7 ppm)	-	1000	-
Cl.9 Table-2 S.No 1, (i) a (Amendment No-1)(Tear strength for other than moulded upper material)	-	500	-
Cl.9 Table-2 S.No 1, (i) b (Amendment No-1)(Tear strength For all moulded upper material)	-	500	-
Cl.9 Table-2 S.No 1, (ii) (Amendment No-1)(Flexing endurance)	-	1500	-
Cl.9 Table-3 S.No 1, (i) (Amendment No-1)(Tear strength, N, Min)	-	500	-
Cl.9 Table-3 S.No 1, (ii) (Amendment No-1)("Abrasion resistance (a) dry condition (b) wet condition")	-	800	-
Cl.9 Table-4 S.No 1, (i) (Amendment No-1)(Tear strength, N, Min)	-	500	-
Cl.9 Table-4 S.No 1, (ii) (Amendment No-1)("Abrasion resistance (a) dry condition (b) wet condition")	-	800	-
Cl.9 Table-5 S.No 1, (i) (Amendment No-1)(Grain crack index)	-	300	-
Cl.9 Table-6 S.No 1, (i) (Amendment No-1)("Density, g/cm3 , Min (a)-Cellular, (b) Solid ")	-	300	-
Cl-10 (Amendment No-1)(Marking)	-	300	-
Cl.9 Table-5 S.No 1, (ii) (Amendment No-1)(Density, g/cm3 , Min)	-	300	-
Cl.8 - Table No 1 - Sl. No.-xiv(pH- IS 1390:2022)	-	500	-
Cl.8 - Table No 1 - Sl. No.-xv("Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988")	-	300	-
Cl.8 - Table No 1 - Sl. No.-xiv(pH- IS 1390:2022)	-	300	-
Cl.8 - Table No 1 - Sl. No.-xv("Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988")	-	1000	-
Cl. No.8.4,Table no. 4(iii)(Abrasion resistance)	-	800	-
Cl.9 Table-5 S.No 1, (iii) (Amendment No-1)(Abrasion resistance, mm/kcs)	-	800	-

15 Apr, 2027

-
Included w.e.f.29.11.2024

10597

BIS, Central Laboratory (CL)

None

IS 10805 (2022)

Foot-Valves, Reflux Valves or NonReturn Valves and Bore Valves to be Used in Suction Lines of Agricultural Pumping Systems â Specification ( Second Revision )

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6 (Coatings)	-
3 (Dimensions)	-
7.1.1 (Seat Test)	-
7.1.2 (Housing Test)	-

-
Sample of 5 cutpc having dia > 3mm and thickness > 0.8 mm shall be provided. Grade/designation of material of component as per Cl. 4 of IS 10805 has to be declraed.

10598

Central Institute of Petrochemical Engineering and Technology (CIPET), Guwahati

5117534

IS 16653 (2017)

Geosynthetics â€“ Needle punched nonwoven geobags for coastal and waterways protection â€“ Specification

Type 1 to 3

122031 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4.1.1 Table 1 A (iii)(Seam strength, percentage of actual fabric strength)	-	1600	Test Charge - 1100.00 Specimen Preparation Charges - 500.00
Cl 4.1.1 Table 1 A (vi)(CBR Puncture resistance (N))	-	1600	Test Charge - 1100.00 Specimen Preparation Charges - 500.00
Cl 4.1.1 Table 1 A (i) (a)(Wide with tensile strength , Machine direction)	-	1600	Test Charge - 1100.00 Specimen Preparation Charges - 500.00
Cl 4.1.1 Table 1 A (ii) (a)(Elongation, Machine Direction)	-	0	-
Cl 4.1.1 Table 1 A (iv)(Abrasion Resistance)	-	7275	Test Charge - 5275.00 Specimen Preparation Charges - 2000.00
Cl 4.1.1 Table 1 A (v) (a)(Trapezoidal tear strength, Machine Direction)	-	1600	Test Charge - 1100.00 Specimen Preparation Charges - 500.00
Cl 4.1.1 Table 1 B (i)(Permittivity)	-	1700	Test Charge - 1200.00 Specimen Preparation Charges - 500.00
Cl 4.1.1 Table 1 B (ii)(Water permittivity)	-	1700	Test Charge - 1200.00 Specimen Preparation Charges - 500.00
Cl 4.1.1 Table 1 B (iii)(Apparent opening size)	-	700	Test Charge - 700.00
Cl 4.1.1 Table 1 C (i)(Thickness at 2kpa)	-	500	-
Cl 4.1.1 Table 1 C (ii)(Polymer types)	-	2700	-
Cl 4.1.1 Table 1 C (iii)(Mass)	-	500	-
Cl 4.1.1 Table 1 C (iv) (a)(Length of geobag, Small size)	-	500	-
Cl 4.1.1 Table 1 C (v) (a)(Width of geobag, small size)	-	500	-
Cl 4.1.1 Table 1 C (vi) (a)(Mass of sand filled geobag, small size)	-	500	-
Cl 4.1.1 Table 1 C (vii)(Durability)	-	0	-
Cl 4.1.1 Table 1 C (vii)(UV resistance after 500h)	-	95400	Test Charge - 4400.00 Specimen Preparation Charges - 91000.00
Cl 4.1.1 Table 1 A (i) (b)(Wide with tensile strength , Cross Machine direction)	-	1600	Test Charge - 1100.00 Specimen Preparation Charges - 500.00
Cl 4.1.1 Table 1 A (ii) (b)(Elongation, Cross Machine Direction)	-	0	-
Cl 4.1.1 Table 1 A (v) (b)(Trapezoidal tear strength, Cross Machine Direction)	-	1600	Test Charge - 1100.00 Specimen Preparation Charges - 500.00
Cl 4.1.1 Table 1 C (iv) (b)(Length of geobag, large size)	-	500	-
Cl 4.1.1 Table 1 C (v) (b)(Width of geobag, large size)	-	500	-
Cl 4.1.1 Table 1 C (vi) (b)(Mass of sand filled geobag, large size)	-	500	-
Cl 5(Marking)	-	500	-
Cl 4.1.3(The isophthalic acid content of the virgin polyester fiber)	-	2000	-
Cl 4.3(Prefabrication of Geobags)	-	4300	-
Cl 4.1.1 Table 1 A (iii)(Seam strength, percentage of actual fabric strength)	-	0	Already quoted
Cl 4.1.1 Table 1 A (vi)(CBR Puncture resistance (N))	-	0	Already quoted
Cl 4.1.1 Table 1 A (i) (a)(Wide with tensile strength , Machine direction)	-	0	Already quoted
Cl 4.1.1 Table 1 A (ii) (a)(Elongation, Machine Direction)	-	0	Already quoted
Cl 4.1.1 Table 1 A (iv)(Abrasion Resistance)	-	0	Already quoted
Cl 4.1.1 Table 1 A (v) (a)(Trapezoidal tear strength, Machine Direction)	-	0	Already quoted
Cl 4.1.1 Table 1 B (i)(Permittivity)	-	0	Already quoted
Cl 4.1.1 Table 1 B (ii)(Water permittivity)	-	0	Already quoted
Cl 4.1.1 Table 1 B (iii)(Apparent opening size)	-	0	Already quoted
Cl 4.1.1 Table 1 C (i)(Thickness at 2kpa)	-	0	Already quoted
Cl 4.1.1 Table 1 C (ii)(Polymer types)	-	0	Already quoted
Cl 4.1.1 Table 1 C (iii)(Mass)	-	0	Already quoted
Cl 4.1.1 Table 1 C (iv) (a)(Length of geobag, Small size)	-	0	Already quoted
Cl 4.1.1 Table 1 C (v) (a)(Width of geobag, small size)	-	0	Already quoted
Cl 4.1.1 Table 1 C (vi) (a)(Mass of sand filled geobag, small size)	-	0	Already quoted
Cl 4.1.1 Table 1 C (vii)(Durability)	-	0	Already quoted
Cl 4.1.1 Table 1 C (vii)(UV resistance after 500h)	-	0	Already quoted
Cl 4.1.1 Table 1 A (i) (b)(Wide with tensile strength , Cross Machine direction)	-	0	Already quoted
Cl 4.1.1 Table 1 A (ii) (b)(Elongation, Cross Machine Direction)	-	0	Already quoted
Cl 4.1.1 Table 1 A (v) (b)(Trapezoidal tear strength, Cross Machine Direction)	-	0	Already quoted
Cl 4.1.1 Table 1 C (iv) (b)(Length of geobag, large size)	-	0	Already quoted
Cl 4.1.1 Table 1 C (v) (b)(Width of geobag, large size)	-	0	Already quoted
Cl 4.1.1 Table 1 C (vi) (b)(Mass of sand filled geobag, large size)	-	0	Already quoted
Cl 5(Marking)	-	0	Already quoted
Cl 4.1.3(The isophthalic acid content of the virgin polyester fiber)	-	0	Already quoted
Cl 4.3(Prefabrication of Geobags)	-	0	Already quoted

31 Dec, 2026

-
Included w.e.f. 28.08.2024

10599

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 6649 (1985)

Specification for hardened and tempered washers for high strength structural bolts and nuts (First Revision)

Type-A, Type-B, Type-C

16900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3 Table-1(Dimensions Type A- d1)	-	1000	-
3 Table-1(Dimensions Type A- d2)	-	1000	-
3 Table-1(Dimensions Type A- S)	-	1000	-
3 Table-2(Dimensions Type B&C- d)	-	1000	-
3 Table-2(Dimensions Type B&C- a)	-	1000	-
3 Table-2(Dimensions Type B&C- t)	-	1000	-
3 Table-2(Dimensions Type B&C- θ)	-	1000	-
3.1(Deviation)	-	500	-
3.2(Concentric)	-	500	-
3.3(Clearance)	-	500	-
5(Chemical Composition- Sulphur)	-	700	-
5(Chemical Composition- Phosphorus)	-	700	-
7(Hardness)	-	1000	-
8(Finish)	-	1500	-
8.1(Freedom from defect)	-	1000	-
8.1(Uniformity of zinc coating)	-	1000	-
8.1(Mass of zinc coating)	-	1500	-
8.1(Knife test (Adhesion of coating))	-	1000	-

31 Dec, 2029

-
Included w.e.f. 08.05.2024

10600

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 14394 (1996)

Industrial fasteners - Hexagon nuts of product grade C - Hot - Dip galvanized - Specification (Size Range M12 To M36)

M12 TO M36

19800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Dimensions)	-	3000	-
4(General Requirement)	-	3000	-
4(Thread)	-	1000	-
4(Mechanical properties)	-	4500	-
4(Tolerances)	-	600	-
4(Surface finish)	-	2000	-
4(Acceptability)	-	1500	-
5.1(Proof loadvalues)	-	3000	-
6(Designation)	-	1000	-
7(Marking)	-	200	-
3(Dimensions)	-	-	-
4(General Requirement)	-	-	-
4(Thread)	-	-	-
4(Mechanical properties)	-	-	-
4(Tolerances)	-	-	-
4(Surface finish)	-	-	-
4(Acceptability)	-	-	-
5.1(Proof loadvalues)	-	-	-
6(Designation)	-	-	-
7(Marking)	-	-	-

31 Dec, 2029

-
Included w.e.f. 08.05.2024

10601

AADCO TESTING & RESEACH LABORATORY PVT LTD (UNIT-2) (E37), Ghaziabad

8176906

IS 14203 (2023)

FIRE RESISTING RECORD PROTECTION CABINETS SPECIFICATION Second Revision of IS 14203

All Type/All Sizes

750000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3 and 6 (Table 1)(Nominal Sizes - Height)	-	5000	-
3 and 6 (Table 1)(Nominal Sizes - Width)	-	5000	-
3 and 6 (Table 1)(Nominal Sizes - Depth)	-	5000	-
3 and 6 (Table 1)(Height of Pedestal)	-	5000	-
7(Designation)	-	5000	-
8.1(Cabinet Construction)	-	5000	-
8.2(Locking Mechanism)	-	6500	-
8.3(Locks)	-	5000	-
8.4(Handles)	-	5000	-
9(Internal Fixtures)	-	5000	-
10.1(Minimum overall thinckness of coating)	-	5000	-
10.2(Cross Hatch Test)	-	10000	-
11, Annex-B, 3.1(Fire Endurance Test)	-	550000	-
11, Annex-B, 3.2(Fire and Impact test)	-	525000	-

19 Mar, 2027

-
Included w.e.f 06.05.2024

10602

Plastics Woven Bag Testing Lab-Technical Training & Research Centre - TTRC

9187136

IS 16208 (2015)

Textiles - High density polyethylene (HDPE)/polypropylene (PP) woven sacks for packaging 10 kg, 15 kg, 20 kg, 25 kg and 30 kg foodgrains - Specification

10 kg, 15 kg, 20 kg, 25 kg and 30 kg

16500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(TYPES)	-	0	-
4.1(Raw Material)	-	0	-
4.2(Tapes – Width IS 6192 and IS 11197)	-	0	-
4.2(Tapes – Linear Density )	-	0	-
4.2(Construction)	-	0	-
4.3(Sacks)	-	0	-
4.3.1(Bottom Seam)	-	0	-
4.3.1( The two rows of stitches shall be separated from each other)	-	0	-
4.3.1( The outer stitch)	-	0	-
4.3.1( The stitching shall be done with double fold over seam to a depth )	-	0	-
4.3.1(Stitches pass through a minimum of six layers of the fabric. )	-	0	-
4.3.1(The number of stitches/dm)	-	0	-
4.3.2(Mouth)	-	0	-
4.4 and Table 1 i(Capacity)	-	0	-
5.2 and Table 1 ii a(Dimensions Inside Length)	-	200	-
5.2 and Table 1 ii b(Dimensions Inside Width)	-	200	-
5.2 and Table 1 iii(Ends per dm )	-	200	-
5.2 and Table 1 iv(Picks per dm )	-	200	-
5.1 and Table 1 v(Mass of sack )	-	500	-
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise )	-	1000	-
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise )	-	1000	-
5.2 and Table 1 vi(Breaking strength of bottom seam )	-	750	-
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise)	-	200	-
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise )	-	200	-
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	8500	-
5.2 and Table 1 x(Ash content )	-	800	-
3(TYPES)	-	0	-
4.1(Raw Material)	-	0	-
4.2(Tapes – Width IS 6192 and IS 11197)	-	0	-
4.2(Tapes – Linear Density )	-	0	-
4.2(Construction)	-	0	-
4.3(Sacks)	-	0	-
4.3.1(Bottom Seam)	-	0	-
4.3.1( The two rows of stitches shall be separated from each other)	-	0	-
4.3.1( The outer stitch)	-	0	-
4.3.1( The stitching shall be done with double fold over seam to a depth )	-	0	-
4.3.1(Stitches pass through a minimum of six layers of the fabric. )	-	0	-
4.3.1(The number of stitches/dm)	-	0	-
4.3.2(Mouth)	-	0	-
4.4 and Table 1 i(Capacity)	-	0	-
5.2 and Table 1 ii a(Dimensions Inside Length)	-	200	-
5.2 and Table 1 ii b(Dimensions Inside Width)	-	200	-
5.2 and Table 1 iii(Ends per dm )	-	200	-
5.2 and Table 1 iv(Picks per dm )	-	200	-
5.1 and Table 1 v(Mass of sack )	-	500	-
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise )	-	1000	-
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise )	-	1000	-
5.2 and Table 1 vi(Breaking strength of bottom seam )	-	750	-
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise)	-	200	-
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise )	-	200	-
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	8500	-
5.2 and Table 1 x(Ash content )	-	800	-
4.2 (Mesh size and weight in g/cm2) (amendment 3)(Mesh size and weight in g/cm2)	-	1000	-

29 Jul, 2028

-
-

10603

Plastics Woven Bag Testing Lab-Technical Training & Research Centre - TTRC

9187136

IS 14968 (2015)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packing 50 Kg/25 kg sugar – Specification (first revision)

50/25

16500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(TYPES)	-	0	-
4.1(Raw Material)	-	0	-
4.2(Tapes – Width IS 6192 and IS 11197)	-	0	-
4.2(Tapes – Linear Density )	-	0	-
4.2(Construction)	-	0	-
4.3(Sacks)	-	0	-
4.3.1(Bottom Seam)	-	0	-
4.3.1(The two rows of stitches shall be separated from each other)	-	0	-
4.3.1( The outer stitch)	-	0	-
4.3.1( The stitching shall be done with double fold over seam to a depth )	-	0	-
4.3.1(Stitches pass through a minimum of six layers of the fabric. )	-	0	-
4.3.1(stitches/dm)	-	0	-
4.3.2(Mouth)	-	0	-
4.4(Liner IS 10146 or IS 10910.)	-	0	-
4.4(Mass of the loose liner )	-	0	-
4.4(Width of the loose liner)	-	0	-
4.4(Length of the line)	-	0	-
4.4(Bottom seam of the loose liner)	-	0	-
4.4.1(Liner)	-	0	-
4.5 and Table 1 i(Capacity)	-	0	-
5.2 and Table 1 ii a(Dimensions Inside Length)	-	200	-
5.2 and Table 1 ii b(Dimensions Inside Width)	-	200	-
5.2 and Table 1 iii(Ends per dm )	-	200	-
5.2 and Table 1 iv(Picks per dm )	-	200	-
5.1 and Table 1 v a(Mass of unlaminated sack IS 1964)	-	500	-
5.1 and Table 1 v b(Mass of unlaminated sack with liner )	-	500	-
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise IS 1969 (Part 1))	-	1000	-
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise IS 1969 (Part 1))	-	1000	-
5.2 and Table 1 vi(Breaking strength of bottom seam IS 9030 )	-	750	-
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise IS 1969 (Part 1))	-	200	-
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise IS 1969 (Part 1))	-	200	-
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	8000	-
5.2 and Table 1 x(Ash content )	-	800	-
3(TYPES)	-	0	-
4.1(Raw Material)	-	0	-
4.2(Tapes – Width IS 6192 and IS 11197)	-	0	-
4.2(Tapes – Linear Density )	-	0	-
4.2(Construction)	-	0	-
4.3(Sacks)	-	0	-
4.3.1(Bottom Seam)	-	0	-
4.3.1(The two rows of stitches shall be separated from each other)	-	0	-
4.3.1( The outer stitch)	-	0	-
4.3.1( The stitching shall be done with double fold over seam to a depth )	-	0	-
4.3.1(Stitches pass through a minimum of six layers of the fabric. )	-	0	-
4.3.1(stitches/dm)	-	0	-
4.3.2(Mouth)	-	0	-
4.4(Liner IS 10146 or IS 10910.)	-	0	-
4.4(Mass of the loose liner )	-	200	-
4.4(Width of the loose liner)	-	0	-
4.4(Length of the line)	-	0	-
4.4(Bottom seam of the loose liner)	-	0	-
4.4.1(Liner)	-	0	-
4.5 and Table 1 i(Capacity)	-	0	-
5.2 and Table 1 ii a(Dimensions Inside Length)	-	200	-
5.2 and Table 1 ii b(Dimensions Inside Width)	-	200	-
5.2 and Table 1 iii(Ends per dm )	-	200	-
5.2 and Table 1 iv(Picks per dm )	-	200	-
5.1 and Table 1 v a(Mass of unlaminated sack IS 1964)	-	500	-
5.1 and Table 1 v b(Mass of unlaminated sack with liner )	-	500	-
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise IS 1969 (Part 1))	-	1000	-
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise IS 1969 (Part 1))	-	1000	-
5.2 and Table 1 vi(Breaking strength of bottom seam IS 9030 )	-	800	-
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise IS 1969 (Part 1))	-	200	-
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise IS 1969 (Part 1))	-	200	-
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	8000	-
5.2 and Table 1 x(Ash content )	-	800	-
4.2 (Mesh size and weight in g/cm2) (amendment 3)(Mesh size and weight in g/cm2)	-	1000	-
Cl-4.4 (Amendment-3)(Thickness of liner)	-	200	-
5.3(UV Resistance)	-	5500	-

29 Jul, 2028

-
-

10604

Plastics Woven Bag Testing Lab-Technical Training & Research Centre - TTRC

9187136

IS 14887 (2014)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg food grains – Specification (first revision)

16500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2(Tapes – Width and Thickness ( IS 6192/IS 11197))	-	0	-
3.2(Tapes – Linear Density (IS 6192/IS 11197))	-	0	-
3.2(Tapes – Tenacity (IS 6192/IS 11197))	-	0	-
3.2(Tapes – Elongation at point of rupture (IS 6192/IS 11197))	-	0	-
3.2(Tapes – Heat Shrinkage (HDPE) (Cl. 3.2 and IS 6192))	-	500	-
3.2(Tapes – Colour Fastness for pigmented tapes (IS 6192/IS 11197))	-	0	-
3.2(Tapes – Dimensional stability (PP) (IS 11197))	-	0	-
3.2(Unlaminated Fabric Mass )	-	500	-
3.3.1(Bottom seam (IS 10789))	-	0	-
4.1 and 3.4(Mass of bale (Cl. 4.1), Capacity (Cl 3.4))	-	0	-
4.2 and Table 1 ii(Dimensions )	-	500	-
5.2 and Table 1 iii(Ends per dm )	-	200	-
5.2 and Table 1 iv(Picks per dm )	-	200	-
4.2 and Table 1 v(Mass of sack )	-	500	-
4.2 and Table 1 vi(Average breaking strength of fabric )	-	1000	-
4.2 and Table 1 vi(Breaking strength of bottom seam )	-	750	-
4.2 and Table 1 viii(Elongation at break of fabric )	-	200	-
4.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	8500	-
4.2 and Table 1 x(Ash content )	-	800	-
3.2(Tapes – Width and Thickness ( IS 6192/IS 11197))	-	0	-
3.2(Tapes – Linear Density (IS 6192/IS 11197))	-	0	-
3.2(Tapes – Tenacity (IS 6192/IS 11197))	-	0	-
3.2(Tapes – Elongation at point of rupture (IS 6192/IS 11197))	-	200	-
3.2(Tapes – Heat Shrinkage (HDPE) (Cl. 3.2 and IS 6192))	-	500	-
3.2(Tapes – Colour Fastness for pigmented tapes (IS 6192/IS 11197))	-	0	-
3.2(Tapes – Dimensional stability (PP) (IS 11197))	-	0	-
3.2(Unlaminated Fabric Mass )	-	500	-
3.3.1(Bottom seam (IS 10789))	-	800	-
4.1 and 3.4(Mass of bale (Cl. 4.1), Capacity (Cl 3.4))	-	0	-
4.2 and Table 1 ii(Dimensions )	-	500	-
5.2 and Table 1 iii(Ends per dm )	-	200	-
5.2 and Table 1 iv(Picks per dm )	-	200	-
4.2 and Table 1 v(Mass of sack )	-	500	-
4.2 and Table 1 vi(Average breaking strength of fabric )	-	1000	-
4.2 and Table 1 vi(Breaking strength of bottom seam )	-	800	-
4.2 and Table 1 viii(Elongation at break of fabric )	-	200	-
4.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	8500	-
4.2 and Table 1 x(Ash content )	-	800	-
3.1(Material Identification)	-	1000	-
3.1(Overall Migration)	-	0	-
3.2(Density)	-	0	-
3.2(MFI)	-	1000	-
Cl 3.2 (Weight in g/m2) (Amendment 3)(Weight in g/m2)	-	200	-
Cl 3.2 (Mesh size)(Mesh size)	-	200	-
3.3.2(Mouth)	-	200	-

29 Jul, 2028

-
-

10605

National Test House (WR) - NTH, Mumbai

7107604

IS 302 : Part 2 : Sec 6 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 6 cooking ranges, hobs, ovens and similar appliances (First Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	500	-
7.0(Marking and instructions)	-	500	-
8.0(Protection against access to live part test)	-	500	-
9.0(Starting of motor-operated appliances test)	-	500	-
10.0(Power Input and current test)	-	500	-
11.0(Heating test)	-	1000	-
13.0(Leakage current and electric strength test)	-	500	-
14.0(Transient voltages)	-	500	-
15.0(Moisture Resistance)	-	1000	-
16.0(Leakage current and electric strength test)	-	500	-
17.0(Overload protection of transformers test)	-	500	-
18.0(Endurance test)	-	1000	-
19.0(Abnormal Operations)	-	1000	-
20.0(Stability and Mechanical Hazards)	-	500	-
21.0(Mechanical Strength)	-	500	-
22.0(Construction verification related tests)	-	500	-
23.0(Internal wiring)	-	500	-
24.0(Components)	-	500	-
25.0(Supply connections and External Flexible Cords)	-	500	-
26.0(Terminal for External Conductors)	-	500	-
27.0(Provision for Earthing)	-	500	-
28.0(Screws and connections)	-	500	-
29.0(Clearances and Creepage distances and solid insulation)	-	500	-
30.0(Resistance to heat and fire)	-	500	-
31.0(Resistance to rusting)	-	500	-
19.11.4.1(Electrostatic discharges)	-	500	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	500	-
19.11.4.7(Harmonics)	-	500	-
4(General Requirements)	-	500	-
5(General condition for the tests)	-	500	-
6.0(Classification)	-	500	-
7.0(Marking and instructions)	-	500	-
8.0(Protection against access to live part test)	-	500	-
9.0(Starting of motor-operated appliances test)	-	500	-
10.0(Power Input and current test)	-	500	-
11.0(Heating test)	-	1000	-
13.0(Leakage current and electric strength test)	-	500	-
14.0(Transient voltages)	-	500	-
15.0(Moisture Resistance)	-	1000	-
16.0(Leakage current and electric strength test)	-	500	-
17.0(Overload protection of transformers test)	-	500	-
18.0(Endurance test)	-	1000	-
19.0(Abnormal Operations)	-	1000	-
20.0(Stability and Mechanical Hazards)	-	500	-
21.0(Mechanical Strength)	-	500	-
22.0(Construction verification related tests)	-	500	-
23.0(Internal wiring)	-	500	-
24.0(Components)	-	500	-
25.0(Supply connections and External Flexible Cords)	-	500	-
26.0(Terminal for External Conductors)	-	500	-
27.0(Provision for Earthing)	-	500	-
28.0(Screws and connections)	-	500	-
29.0(Clearances and Creepage distances and solid insulation)	-	500	-
30.0(Resistance to heat and fire)	-	500	-
31.0(Resistance to rusting)	-	500	-
19.11.4.1(Electrostatic discharges)	-	500	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	500	-
19.11.4.7(Harmonics)	-	500	-
4(General Requirements)	-	500	-
5(General condition for the tests)	-	500	-

24 Jul, 2028

-
Included w.e.f. 31.07.2024 Exclusion: Cl.32.0 (Radiation, Toxicity and Similar hazards), Cl. 19.11.4.2 (Radiated fields), Cl. 19.11.4.3 (Fast transient bursts), Cl. 19.11.4.4 (Surge immunity test), Cl. 19.11.4.5 (Immunity to conducted discharges)

10606

National Test House (WR) - NTH, Mumbai

7107604

IS 302 : Part 2 : Sec 2 (1997)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 2 vacuum cleaners and water suction cleaning appliances

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Rating)	-	500	-
6(Classification)	-	500	-
7(Marking)	-	500	-
8(Protection against Access to Live Parts)	-	500	-
9(Starting Of Motor Operated Appliances)	-	500	-
10("Power Input & Current")	-	500	-
11(Temperature Rise/ Heating)	-	1000	-
12(OPERATION UNDER OVERLOAD CONDITIONS OF APPLIANCES WITH HEATING ELEMENTS)	-	1000	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	500	-
15(MOISTURE RESISTANCE)	-	1000	-
16(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( AFTER HUMIDITY TREATMENT ))	-	500	-
17(OVERLOAD PROTECTION)	-	500	-
19(ABNORMAL OPERATION)	-	500	-
20(STABILITY AND MECHANICAL HAZARDS)	-	500	-
21(MECHANICAL STRENGTH)	-	500	-
22(Construction)	-	500	-
23(INTERNAL WIRING)	-	500	-
24(COMPONENTS)	-	500	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS)	-	500	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	500	-
27(PROVISION FOR EARTHING)	-	500	-
28(SCREWS AND CONNECTIONS)	-	500	-
29(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH INSULATION)	-	500	-
30(RESISTANCE TO HEAT, FIRE AND TRACKING)	-	1000	-
31(RESISTANCE TO RUSTING)	-	500	-
5(Rating)	-	500	-
6(Classification)	-	500	-
7(Marking)	-	500	-
8(Protection against Access to Live Parts)	-	500	-
9(Starting Of Motor Operated Appliances)	-	500	-
10("Power Input & Current")	-	500	-
11(Temperature Rise/ Heating)	-	1000	-
12(OPERATION UNDER OVERLOAD CONDITIONS OF APPLIANCES WITH HEATING ELEMENTS)	-	500	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	500	-
15(MOISTURE RESISTANCE)	-	1000	-
16(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( AFTER HUMIDITY TREATMENT ))	-	500	-
17(OVERLOAD PROTECTION)	-	500	-
19(ABNORMAL OPERATION)	-	500	-
20(STABILITY AND MECHANICAL HAZARDS)	-	500	-
21(MECHANICAL STRENGTH)	-	500	-
22(Construction)	-	500	-
23(INTERNAL WIRING)	-	500	-
24(COMPONENTS)	-	500	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS)	-	500	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	500	-
27(PROVISION FOR EARTHING)	-	500	-
28(SCREWS AND CONNECTIONS)	-	500	-
29(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH INSULATION)	-	500	-
30(RESISTANCE TO HEAT, FIRE AND TRACKING)	-	1000	-
31(RESISTANCE TO RUSTING)	-	500	-
5(Rating)	-	500	-
6(Classification)	-	500	-
7(Marking)	-	500	-
8(Protection against Access to Live Parts)	-	500	-
9(Starting Of Motor Operated Appliances)	-	500	-
10("Power Input & Current")	-	500	-
11(Temperature Rise/ Heating)	-	1000	-
12(OPERATION UNDER OVERLOAD CONDITIONS OF APPLIANCES WITH HEATING ELEMENTS)	-	500	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	500	-
15(MOISTURE RESISTANCE)	-	500	-
16(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( AFTER HUMIDITY TREATMENT ))	-	500	-
17(OVERLOAD PROTECTION)	-	500	-
19(ABNORMAL OPERATION)	-	1000	-
20(STABILITY AND MECHANICAL HAZARDS)	-	500	-
21(MECHANICAL STRENGTH)	-	500	-
22(Construction)	-	500	-
23(INTERNAL WIRING)	-	500	-
24(COMPONENTS)	-	500	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS)	-	500	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	500	-
27(PROVISION FOR EARTHING)	-	500	-
28(SCREWS AND CONNECTIONS)	-	500	-
29(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH INSULATION)	-	500	-
30(RESISTANCE TO HEAT, FIRE AND TRACKING)	-	500	-
31(RESISTANCE TO RUSTING)	-	500	-

24 Jul, 2028

-
Included w.e.f. 31.07.2024 Exclusion: Cl.14 (RADIO AND TELEVISION INTERFERENCE SUPPRESSION), Cl. 32 (RADIATION HAZARDS), 19.11.4.2 (Radiated fields), Cl. 19.11.4.3 (Fast transient bursts), Cl. 19.11.4.4 (Surge immunity test), Cl. 19.11.4.5 (Immunity to conducted discharges), Cl. 19.11.4.1 (Electrostatic discharges)

10607

Delhi Test House (A Unit of Delhii Test House Global LLP) (50) Kundli, Sonipat

9127026

IS 4159 (2021)

Mineral Filled Sheathed Heating Elements

11600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
"Cl. 6 IS 4159:2021"(Classification)	-	600	-
"Cl. 8 IS 4159:2021"(Protection against access to live parts)	-	600	-
"Cl. 9 IS 4159:2021"(Starting of motor operated appliances)	-	1000	-
"Cl. 10 IS 4159:2021"(Power Input and Current)	-	500	-
"Cl. 11 IS 4159:2021"(Heating)	-	600	-
"Cl. 13 IS 4159:2021"(Leakage Current & Electrical Strength at Operating Temperature)	-	500	-
"Cl. 14 IS 4159:2021"(Transient Over Voltage)	-	600	-
"Cl. 15 IS 4159:2021"(Moisture Resistance)	-	1000	-
"Cl. 16 IS 4159:2021"(Leakage Current and Electric strength)	-	800	-
"Cl. 17 IS 4159:2021"(Overload protection of transformers and associated circuits.)	-	800	-
"Cl. 18 IS 4159:2021"(Endurance)	-	800	-
"Cl. 19 IS 4159:2021"(Abnormal Operation)	-	500	-
"Cl. 20 IS 4159:2021"(Stability and mechanical Hazards)	-	500	-
"Cl. 21 IS 4159:2021"(Mechanical Strength)	-	300	-
"Cl. 22 IS 4159:2021"(Construction)	-	600	-
"Cl. 23 IS 4159:2021"(Internal Wiring)	-	300	-
"Cl. 24 IS 4159:2021"(Components)	-	300	-
"Cl. 25 IS 4159:2021"(Supply Connections and External Flexible Cables and Cords)	-	300	-
"Cl. 26 IS 4159:2021"(Terminal For External Conductors)	-	300	-
"Cl. 27 IS 4159:2021"(Provision For Earthing)	-	800	-
"Cl. 28 IS 4159:2021"(Screws and Connections)	-	300	-
"Cl. 29 IS 4159:2021"(Creepage Distances, Clearances And Distances Through Insulation)	-	500	-
"Cl. 30 IS 4159:2021"(Resistance To Heat, Fire And Tracking)	-	1000	-
"Cl. 31 IS 4159:2021"(Resistance To Rusting)	-	500	-
"Cl. 102 IS 4159:2021"(Leakage and hydrostatic strength (for oil heating elements))	-	1500	-
Cl.22.106(CONSTRUCTION)	-	600	-
"Cl. 6 IS 4159:2021"(Classification)	-	600	-
"Cl. 8 IS 4159:2021"(Protection against access to live parts)	-	600	-
"Cl. 9 IS 4159:2021"(Starting of motor operated appliances)	-	1000	-
"Cl. 10 IS 4159:2021"(Power Input and Current)	-	500	-
"Cl. 11 IS 4159:2021"(Heating)	-	600	-
"Cl. 13 IS 4159:2021"(Leakage Current & Electrical Strength at Operating Temperature)	-	500	-
"Cl. 14 IS 4159:2021"(Transient Over Voltage)	-	600	-
"Cl. 15 IS 4159:2021"(Moisture Resistance)	-	1000	-
"Cl. 16 IS 4159:2021"(Leakage Current and Electric strength)	-	800	-
"Cl. 17 IS 4159:2021"(Overload protection of transformers and associated circuits.)	-	800	-
"Cl. 18 IS 4159:2021"(Endurance)	-	800	-
"Cl. 19 IS 4159:2021"(Abnormal Operation)	-	800	-
"Cl. 20 IS 4159:2021"(Stability and mechanical Hazards)	-	500	-
"Cl. 21 IS 4159:2021"(Mechanical Strength)	-	300	-
"Cl. 22 IS 4159:2021"(Construction)	-	600	-
"Cl. 23 IS 4159:2021"(Internal Wiring)	-	300	-
"Cl. 25 IS 4159:2021"(Supply Connections and External Flexible Cables and Cords)	-	300	-
"Cl. 26 IS 4159:2021"(Terminal For External Conductors)	-	300	-
"Cl. 27 IS 4159:2021"(Provision For Earthing)	-	800	-
"Cl. 28 IS 4159:2021"(Screws and Connections)	-	300	-
"Cl. 29 IS 4159:2021"(Creepage Distances, Clearances And Distances Through Insulation)	-	500	-
"Cl. 30 IS 4159:2021"(Resistance To Heat, Fire And Tracking)	-	1000	-
"Cl. 31 IS 4159:2021"(Resistance To Rusting)	-	500	-
"Cl. 102 IS 4159:2021"(Leakage and hydrostatic strength (for oil heating elements))	-	1500	-
Cl.22.106(CONSTRUCTION)	-	600	-

23 Jun, 2028

-
Included w.e.f 06.11.2024 Exclusion : Cl 24 Components Cl 19.11.4.1 to 19.11.4.7 (EMI/EMC)

10608

Atmy Analytical Labs Private Limited (Unit-2), Greater Noida

8176106

IS 3614 (2021)

Specification of Fire Doors and Assembly First Revision of IS 3614 Parts 1 2

ALL

490000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Integrity, Insulation)	-	490000	-
Cl 7.2.2(SIZE (width))	-	490000	-
Cl 7.2.2(SIZE (Height))	-	490000	-
Cl 7.3.2(SIZE (width))	-	490000	-
Cl 7.3.2(SIZE (Height))	-	490000	-
Cl 7.4.2(SIZE (width))	-	490000	-
Cl 7.4.2(SIZE (Height))	-	490000	-
Cl 7.5.2(SIZE (width))	-	490000	-
Cl 7.5.2(SIZE (Height))	-	490000	-
7.3.1(MOISTURE CONTENT)	-	490000	-
7.2.7(Vision Pane (Uninsulated door) Width)	-	490000	-
7.2.7(Vision Pane (Uninsulated door) Height)	-	490000	-
7.2.7(Vision Pane (Insulated door) Width)	-	490000	-
7.2.7(Vision Pane (Insulated door) Height)	-	490000	-
7.3.4(Vision Pane (Width))	-	490000	-
7.3.4(Vision Pane (Height))	-	490000	-
Cl-7.2.1(Material)	-	490000	-
Cl-7.2.4(Fire Door Frames)	-	490000	-
Cl-7.2.5(Door Leaf)	-	490000	-
Cl-7.2.8(Louvres)	-	490000	-
Cl-7.2.9(Builder’s Hardware)	-	490000	-
Cl-7.4.3(Construction)	-	490000	-
Cl-7.4.5(Operator)	-	490000	-
Cl-7.5.1(Material)	-	490000	-
Cl-7.5.3(Construction of Sliding Door Leaf)	-	490000	-
Cl-11.3.1(Walls)	-	490000	-
Cl-11.4.1(Closing Devices)	-	490000	-
Cl-11.4.2(Releasing Devices)	-	490000	-
Cl-11.4.3(Hardware)	-	490000	-
Cl-6(VISION PANE ON FIRE DOORS)	-	490000	-
Cl-7.2.3(Construction)	-	490000	-
Cl-7.2.6(Intumescent Seal)	-	490000	-
Cl-7.3.6(Builder’s Hardware)	-	490000	-
Cl-7.4.4(General Requirement of Fire Rated Rolling Shutter)	-	490000	-
Cl-7.5.4(General Requirement of Fire Rated Sliding Door)	-	490000	-
Cl-7.6(General Requirement of Fire Doors)	-	490000	-
Cl-7.3.3(Construction)	-	490000	-
4(Integrity, Insulation)	-	0	-
Cl 7.2.2(SIZE (width))	-	0	-
Cl 7.2.2(SIZE (Height))	-	0	-
Cl 7.3.2(SIZE (width))	-	0	-
Cl 7.3.2(SIZE (Height))	-	0	-
Cl 7.4.2(SIZE (width))	-	0	-
Cl 7.4.2(SIZE (Height))	-	0	-
Cl 7.5.2(SIZE (width))	-	0	-
Cl 7.5.2(SIZE (Height))	-	0	-
7.3.1(MOISTURE CONTENT)	-	0	-
7.2.7(Vision Pane (Uninsulated door) Width)	-	0	-
7.2.7(Vision Pane (Uninsulated door) Height)	-	0	-
7.2.7(Vision Pane (Insulated door) Width)	-	0	-
7.2.7(Vision Pane (Insulated door) Height)	-	0	-
7.3.4(Vision Pane (Width))	-	0	-
7.3.4(Vision Pane (Height))	-	0	-
Cl-7.2.1(Material)	-	0	-
Cl-7.2.4(Fire Door Frames)	-	0	-
Cl-7.2.5(Door Leaf)	-	0	-
Cl-7.2.8(Louvres)	-	0	-
Cl-7.2.9(Builder’s Hardware)	-	0	-
Cl-7.4.3(Construction)	-	0	-
Cl-7.4.5(Operator)	-	0	-
Cl-7.5.1(Material)	-	0	-
Cl-7.5.3(Construction of Sliding Door Leaf)	-	0	-
Cl-11.3.1(Walls)	-	0	-
Cl-11.4.1(Closing Devices)	-	0	-
Cl-11.4.2(Releasing Devices)	-	0	-
Cl-11.4.3(Hardware)	-	0	-
Cl-6(VISION PANE ON FIRE DOORS)	-	0	-
Cl-7.2.3(Construction)	-	0	-
Cl-7.2.6(Intumescent Seal)	-	0	-
Cl-7.3.6(Builder’s Hardware)	-	0	-
Cl-7.4.4(General Requirement of Fire Rated Rolling Shutter)	-	0	-
Cl-7.5.4(General Requirement of Fire Rated Sliding Door)	-	0	-
Cl-7.6(General Requirement of Fire Doors)	-	0	-
Cl-7.3.3(Construction)	-	0	-
Cl-7.4(Avg closing speed of fire rated rolling shutters)	-	0	-

08 Feb, 2027

-
Included w.e.f. 01.04.2025

10609

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 617 (1994)

Cast aluminium and its alloys - Ingots and castings for general engineering purposes - Specification (Third Revision)

16800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9(TOLERANCES ON DIMENSIONS OF CASTINGS)	-	100	-
7(FREEDOM FROM DEFECTS)	-	100	-
6.2(Hardness)	-	500	-
6, Table 2.(MECHANICAL PROPERTIES OF CASTINGS)	-	1000	-
5, Table 1.(Chemical Composition)	-	12800	-
17(Marking)	-	100	-
11()	-	200	-
11(Pressure Test)	-	200	-
17(Marking)	-	100	-
11(Pressure Test)	-	200	-
11(Pressure Test - IS 617)	-	200	-
13(Marking)	-	100	-
Table-1, Clause - 5.1(Copper)	-	800	-
Table-1, Clause - 5.1(Iron)	-	1000	-
Table-1, Clause - 5.1(Magnesium)	-	1000	-
Table-1, Clause - 5.1(Manganese)	-	1000	-
Table-1, Clause - 5.1(Tin)	-	1000	-
Table-1, Clause - 5.1(Silicon)	-	1000	-
Table-1, Clause - 5.1(Nickel)	-	1000	-
Table-1, Clause - 5.1(Zinc)	-	1000	-
Table-1, Clause - 5.1(Other elements (each))	-	1000	-
Table-1, Clause - 5.1(Other elements (Total))	-	1000	-
Table-1, Clause - 5.1(Aluminium)	-	1000	-
Table-1, Clause - 5.1(Titanium)	-	1000	-
Table-1, Clause - 5.1(Lead)	-	1000	-
9(TOLERANCES ON DIMENSIONS OF CASTINGS)	-	2000	-
7(FREEDOM FROM DEFECTS)	-	500	-
6.2(Hardness)	-	1000	-
6, Table 2.(MECHANICAL PROPERTIES OF CASTINGS)	-	5000	-
5, Table 1.(Chemical Composition)	-	4300	-
17(Marking)	-	500	-
11()	-	3500	-
11(Pressure Test)	-	3500	-
17(Marking)	-	500	-
11(Pressure Test)	-	3500	-
11(Pressure Test - IS 617)	-	3500	-
13(Marking)	-	500	-
Table-1, Clause - 5.1(Copper)	-	300	-
Table-1, Clause - 5.1(Iron)	-	300	-
Table-1, Clause - 5.1(Magnesium)	-	300	-
Table-1, Clause - 5.1(Manganese)	-	300	-
Table-1, Clause - 5.1(Tin)	-	300	-
Table-1, Clause - 5.1(Silicon)	-	300	-
Table-1, Clause - 5.1(Nickel)	-	300	-
Table-1, Clause - 5.1(Zinc)	-	300	-
Table-1, Clause - 5.1(Aluminium)	-	300	-
Table-1, Clause - 5.1(Titanium)	-	300	-
Table-1, Clause - 5.1(Lead)	-	300	-

31 Dec, 2029

-
-

10610

Delhi Test House (A Unit of Delhii Test House Global LLP) (50) Kundli, Sonipat

9127026

IS 17550 : PART 3 (2021)

Household Refrigerating Appliance- Characteristics and test methods Part 3 Energy Consumption and volume

150000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
"Cl. No. 6 "("DETERMINATION OF ENERGY CONSUMPTION")	-	25000	For Direct Cool - Rs. 150000/-, For Frost Free & Others - Rs. 150000/-
"Cl. No.4.8 & Annex H "(Determination Of Volume)	-	15000	-
"Cl. No. 6 "("DETERMINATION OF ENERGY CONSUMPTION")	-	25000	-
"Cl. No. 6 "("DETERMINATION OF ENERGY CONSUMPTION")	-	25000	-
"Cl. No.4.8 & Annex H "(Determination Of Volume)	-	15000	-
4.2(Steady State Power Consumption)	-	16000	-
4.3(Defrost and Recovery Energy and temperature change)	-	16000	-
4.4(Defrost Frequency)	-	16000	-
4.5(Number of Test Points and Interpolations)	-	16000	-
4.6(Load Processing Efficiency)	-	16000	-
4.7(Specified Auxiliaries)	-	15000	-
4.8(Volumn Determination)	-	15000	-
6(Determination of Energy Consumption)	-	25000	-
Annex B(Determination of Steady state Power & Temperature)	-	16000	-
Annex C(Defrost and Recovery Energy and temperature change)	-	16000	-
Annex D(Defrost Interval)	-	16000	-
Annex E(Interpolation of Results)	-	16000	-
Annex F(Energy Consumption of specified auxiliaries)	-	15000	-
Annex G(Determination of Load Processing Efficiency)	-	16000	-
Annex H(Determination of Volume)	-	15000	-

23 Jun, 2028

-
Included w.e.f. 03.05.2024

10611

DELHI TEST HOUSE (A Unit of Delhii Test House Global LLP), Azadpur

8131406

IS 1328 (1996)

Veneered Decorative Plywood -Specification

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8(Dimensions & Tolerances - Length - Cl. 8)	-	500	NA
8(Dimensions & Tolerances - Width - Cl. 8)	-	500	NA
8(Dimensions & Tolerances - Thickness - Cl. 8)	-	500	NA
8(Dimensions & Tolerances - Edge Straightness - Annexure C)	-	500	NA
8(Dimensions & Tolerances - Squareness - Annexure C)	-	500	NA
9(Finish - Cl. 9.1, 8.3)	-	500	NA
9(Finish - Cl. 9.2, 8.3)	-	500	NA
11(Tests - Moisture Content - Part 1 of IS 1734)	-	1000	NA
11(Tests - Water Resistance Test - Cl. 11.1.2.1 [for MR Grade])	-	2000	NA
11(Tests - Water Resistance Test - Cl. 11.1.2.2 [for BWR Grade])	-	1000	NA
4.1(Grade - For BWR)	-	500	NA
4.1(Grade - For MR)	-	500	NA
4.2(Type - For Type 1)	-	500	NA
4.2(Type - For Type 2)	-	500	NA

17 Jun, 2027

-
Included w.e.f 16.05.2024

10612

DELHI TEST HOUSE (A Unit of Delhii Test House Global LLP), Azadpur

8131406

IS 5509 (2021)

Fire Retardant Plywood - Specification ( Third Revision )

14500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.3 (Table 1)(b) 6 mm and above)	-	500	-
8.1(Dimensions)	-	1000	NA
8.2(Thickness)	-	500	NA
8.3, Taable-1 (i)(Tolerance- Length)	-	250	NA
9(WORKMANSHIP AND FINISH)	-	500	NA
11 (a)(For flammability)	-	500	NA
11 (b)(For flame penetration)	-	500	NA
11 (c)(For rate of burning)	-	500	NA
12.1 Table - 2 (i)(Moisture content, percent, Max)	-	2000	NA
12.1 Table - 2 (ii)(Flammability (see Note 1), minutes, Min)	-	2500	NA
12.1 Table - 2 (iii)(Flame penetration (see Note 2), minutes, Min)	-	2500	NA
12.1 Table - 2 (iv)(Rate of burning (see Note 3), minutes, Min)	-	2500	NA

17 Jun, 2027

-
Included w.e.f 16.05.2024

10613

Delhi Test House (A Unit of Delhii Test House Global LLP) (50) Kundli, Sonipat

9127026

IS 17550 : PART 2 (2021)

Household Refrigerating Appliance- Characteristics and test methods Part 2 Performance requirements

350000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. No. 6(Storage Test)	-	38000	For Direct Cool - Rs. 170000/-, For Frost Free & Others - 350000
Cl. No. 7(Cooling Capacity Test)	-	38000	-
Cl. No. 8(Freezing Capacity Test)	-	38000	-
Cl. No. 9("Automatic Ice-Making Capacity Test")	-	38000	-
"Cl. No.4.6 & Annex A"(PULL-DOWN TEST)	-	48000	-
Cl. No.4.6(b) & Annex B("Wine Storage Appliances And Compartments; Storage Test")	-	44000	-
Cl. No.4.6(C) & AnnexC("Temperature Rise Test ")	-	45000	-
Cl. No.4.6(d) & Annex D("Water Vapour Condensation Test ")	-	46000	-
Cl. No.4.6(d) & Annex D("Water Vapour Condensation Test ")	-	46000	-
Cl. No. 6(Storage Test)	-	38000	-
Cl. No. 8(Freezing Capacity Test)	-	38000	-
Cl. No. 9("Automatic Ice-Making Capacity Test")	-	38000	-
"Cl. No.4.6 & Annex A"(PULL-DOWN TEST)	-	48000	-
Cl. No.4.6(b) & Annex B("Wine Storage Appliances And Compartments; Storage Test")	-	44000	--
Cl. No.4.6(C) & AnnexC("Temperature Rise Test ")	-	45000	-
Cl. No.4.6(d) & Annex D("Water Vapour Condensation Test ")	-	46000	-
4.2(Storage test)	-	38000	-
4.3(Cooling capacity test)	-	38000	-
4.5(Automatic ice-making capacity test)	-	38000	-
4.6(Other Tests)	-	183000	-
6(Storage test)	-	38000	-
7(Cooling capacity test)	-	38000	-
8(Freezing capacity test)	-	38000	-
9(Automatic ice-making capacity test)	-	38000	-
Annex A(Pull Down test)	-	48000	-
Annex B(Storage test of wine storage appliances and compartments)	-	44000	-
Annex C(Temperature Rise Test)	-	45000	-
Annex D(Water Vapour Condensation Test)	-	46000	-
4.4(Freezing Capacity Test)	-	38000	-
5(General Test Conditions)	-	15000	-

23 Jun, 2028

-
Included w.e.f. 03.05.2024

10614

Delhi Test House (A Unit of Delhii Test House Global LLP) (50) Kundli, Sonipat

9127026

IS 17550 : PART 1 (2021)

HOUSEHOLD REFRIGERATING APPLIANCES CHARACTERISTICS AND TEST METHODS Part 1 General Requirements

254000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
"Cl. No. 9 "(Testing The Air Tightness Of Door Or Lid Seal(S))	-	4000	-
"Cl. No.10 "(Testing The Opening Force Of Door(S) Or Lid(S))	-	4000	-
"Cl. No.11 "(Testing The Durability Of Hinges And Handles Of Door(S) And Lid(S))	-	15000	-
"Cl. No.12 "(Testing The Mechanical Strength Of Shelves And Similar Components)	-	4000	-
"Cl. No.14 "(Ice-Making Test (If Applicable))	-	12000	-
"Cl. No.15 "(Test For Absence Of Odour And Taste)	-	15000	-
"Cl. No.16 "(Safety Requirements)	-	23500	-
"Cl. No. 9 "(Testing The Air Tightness Of Door Or Lid Seal(S))	-	4000	-
"Cl. No.10 "(Testing The Opening Force Of Door(S) Or Lid(S))	-	4000	-
"Cl. No.11 "(Testing The Durability Of Hinges And Handles Of Door(S) And Lid(S))	-	15000	-
"Cl. No.12 "(Testing The Mechanical Strength Of Shelves And Similar Components)	-	4000	-
"Cl. No.14 "(Ice-Making Test (If Applicable))	-	12000	-
"Cl. No.15 "(Test For Absence Of Odour And Taste)	-	15000	-
"Cl. No.16(a) "(Protection against acess to live parts)	-	1500	-
"Cl. No.16(b) "(Power input and current)	-	2000	-
"Cl. No.16(c) "(Heating)	-	7000	-
"Cl. No.16(d) "(Leakage current and electric strength at operating temperature)	-	4000	-
"Cl. No.16(e) "(Moisture resistance)	-	5000	-
"Cl. No.16(f) "(Leakage current and electric strength)	-	4000	-
"Cl. No.20.3(a) "("Production Routine Test a)Leakage current test ")	-	1500	-
"Cl. No.20.3(b) "(b) Earth continuity tesT)	-	1500	-
"Cl. No.20.3(c) "(c) Electric strength)	-	1500	-
"Cl. No.8.11 "(Thermostat function test)	-	500	-
"Cl. No.5 "(Markings)	-	1000	-
4(Classification)	-	1000	-
5(Marking)	-	1000	-
6.2(Determination of Linear Dimensions)	-	1000	-
7(Instructions)	-	1000	-
8.2(Material and Finishes)	-	1000	-
8.3(Thermal Insulation and Air Tightness)	-	4000	-
8.4(Doors, Lids and Fittings)	-	4000	-
8.5(Shelves and Containers)	-	4000	-
8.6(Disposal of Defrost Water)	-	4000	-
8.7(Refrigerating System)	-	4000	-
8.8(Supply Cord)	-	4000	-
8.9(Compressor)	-	500	-
8.10(Temperature Sensing Controls (Thermostat))	-	500	-
8.11(Temperature Sensing Controls (Thermostat) Setting)	-	500	-
9(Testing the Air tightness of door or lid seal(s) before water vapour condensation test)	-	4000	-
9(Testing the Air tightness of door or lid seal(s) after water vapour condensation test)	-	4000	-
10(Testing the Opening force of door(s) or lid(s))	-	4000	-
11(Testing the Durability of hinges and handles of door(s) and lid(s))	-	15000	-
12(Testing the Mechanical strength of shelves and similar components)	-	4000	-
13(Water-vapour condensation test)	-	12000	-
14(Ice-making test (if applicable))	-	12000	-
15(Test for absence of odour and taste)	-	15000	-
16(a)(Protection against access to live parts)	-	1500	-
16(b)(Power input and current)	-	2000	-
16 (c(Heating)	-	7000	-
16(d)(Leakage current and electric strength at operating temperature)	-	4000	-
16(e)(Moisture resistance)	-	5000	-
16(f)(Leakage current and electric strength (high voltage after humidity))	-	4000	-
17(Packing)	-	500	-
18(Designation)	-	500	-
19(Instructions for Use and Maintenance)	-	500	-
20.3 (a)(Leakage Current Test)	-	1500	-
20.3 (b)(Earth Continuity Test)	-	1500	-
20.3 (c(Electric Strength Test)	-	1500	-
"Cl. No. 9 "(Testing The Air Tightness Of Door Or Lid Seal(S))	-	4000	-
"Cl. No.10 "(Testing The Opening Force Of Door(S) Or Lid(S))	-	4000	-
"Cl. No.11 "(Testing The Durability Of Hinges And Handles Of Door(S) And Lid(S))	-	15000	-
"Cl. No.12 "(Testing The Mechanical Strength Of Shelves And Similar Components)	-	4000	-
"Cl. No.14 "(Ice-Making Test (If Applicable))	-	12000	-
"Cl. No.15 "(Test For Absence Of Odour And Taste)	-	15000	-
"Cl. No.16 "(Safety Requirements)	-	23500	-
"Cl. No. 9 "(Testing The Air Tightness Of Door Or Lid Seal(S))	-	4000	-
"Cl. No.10 "(Testing The Opening Force Of Door(S) Or Lid(S))	-	4000	-
"Cl. No.11 "(Testing The Durability Of Hinges And Handles Of Door(S) And Lid(S))	-	15000	-
"Cl. No.12 "(Testing The Mechanical Strength Of Shelves And Similar Components)	-	4000	-
"Cl. No.14 "(Ice-Making Test (If Applicable))	-	12000	-
"Cl. No.15 "(Test For Absence Of Odour And Taste)	-	15000	-
"Cl. No.16(a) "(Protection against acess to live parts)	-	1500	-
"Cl. No.16(b) "(Power input and current)	-	2000	-
"Cl. No.16(c) "(Heating)	-	7000	-
"Cl. No.16(d) "(Leakage current and electric strength at operating temperature)	-	4000	-
"Cl. No.16(e) "(Moisture resistance)	-	5000	-
"Cl. No.16(f) "(Leakage current and electric strength)	-	4000	-
"Cl. No.20.3(a) "("Production Routine Test a)Leakage current test ")	-	1500	-
"Cl. No.20.3(b) "(b) Earth continuity tesT)	-	1500	-
"Cl. No.20.3(c) "(c) Electric strength)	-	1500	-
"Cl. No.8.11 "(Thermostat function test)	-	500	-
"Cl. No.5 "(Markings)	-	1000	-
4(Classification)	-	1000	-
5(Marking)	-	1000	-
6.2(Determination of Linear Dimensions)	-	1000	-
7(Instructions)	-	1000	-
8.2(Material and Finishes)	-	1000	-
8.3(Thermal Insulation and Air Tightness)	-	4000	-
8.4(Doors, Lids and Fittings)	-	4000	-
8.5(Shelves and Containers)	-	4000	-
8.6(Disposal of Defrost Water)	-	4000	-
8.7(Refrigerating System)	-	4000	-
8.8(Supply Cord)	-	4000	-
8.9(Compressor)	-	500	-
8.10(Temperature Sensing Controls (Thermostat))	-	500	-
8.11(Temperature Sensing Controls (Thermostat) Setting)	-	500	-
9(Testing the Air tightness of door or lid seal(s) before water vapour condensation test)	-	4000	-
9(Testing the Air tightness of door or lid seal(s) after water vapour condensation test)	-	4000	-
10(Testing the Opening force of door(s) or lid(s))	-	4000	-
11(Testing the Durability of hinges and handles of door(s) and lid(s))	-	15000	-
12(Testing the Mechanical strength of shelves and similar components)	-	4000	-
13(Water-vapour condensation test)	-	12000	-
14(Ice-making test (if applicable))	-	12000	-
15(Test for absence of odour and taste)	-	15000	-
16(a)(Protection against access to live parts)	-	1500	-
16(b)(Power input and current)	-	2000	-
16 (c(Heating)	-	7000	-
16(d)(Leakage current and electric strength at operating temperature)	-	4000	-
16(e)(Moisture resistance)	-	5000	-
16(f)(Leakage current and electric strength (high voltage after humidity))	-	4000	-
17(Packing)	-	500	-
18(Designation)	-	500	-
19(Instructions for Use and Maintenance)	-	500	-
20.3 (a)(Leakage Current Test)	-	1500	-
20.3 (b)(Earth Continuity Test)	-	1500	-
20.3 (c(Electric Strength Test)	-	1500	-

23 Jun, 2028

-
Included w.e.f. 03.05.2024

10615

Bharat Test House Pvt Ltd 781 Sonipat Haryana

9137826

IS 15787 (2008)

Switch - Socket - Outlets (Non - Interlock Type)

Switch-Socket-Outlets (Non-Interlock Type)

24000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6 IS 15787:2008(Ratings )	-	10	-
Cl.7 IS 15787:2008(Classification)	-	10	-
Cl.8 IS 15787:2008(Marking )	-	30	-
Cl.9 IS 15787:2008(Checking of dimension)	-	200	-
Cl.10 IS 15787:2008(Protection against to electric shock )	-	500	-
Cl.11 IS 15787:2008(Provision for earthing )	-	500	-
Cl.12 IS 15787:2008(Terminals)	-	1000	-
Cl.13 IS 15787:2008(Construction of fixed socket outlet)	-	1000	-
Cl.14 IS 15787:2008(Construction of Plugs and Portable Socket- Outlet )	-	1000	-
Cl.15 IS 15787:2008(Interlocked Socket-outlet )	-	800	-
Cl.16 IS 15787:2008(Resistance to ageing,To harmful ingress of water and To Humidity)	-	1500	-
Cl.17 IS 15787:2008(Insulation resistance & electric strength )	-	500	-
Cl.18 IS 15787:2008(Operation of Earthing Contacts)	-	500	-
Cl.19 IS 15787:2008(Temperature rise )	-	3000	-
Cl.20 IS 15787:2008(Making & Breaking )	-	3500	-
Cl.21 IS 15787:2008(Normal operation )	-	2000	-
Cl.22 IS 15787:2008(Force necessary to withdraw the plug )	-	500	-
Cl.23 IS 15787:2008(Flexible cables & their connections)	-	500	-
Cl.24 IS 15787:2008(Mechanical strength)	-	700	-
Cl.25 IS 15787:2008(Resistance to heat )	-	3000	-
Cl.26 IS 15787:2008(Screws, current carrying parts & connections)	-	500	-
Cl.27 IS 15787:2008(Creepage distance, clearances & Distance through sealing compounds)	-	250	-
Cl.28 IS 15787:2008(Resistance of insulating material to Abnormal Heat , To Fire & To tracking )	-	1000	-
Cl.29 IS 15787:2008(Resistance to Rusting)	-	1000	-
Cl.30 IS 15787:2008(Additional tests on pins providing with insulating sleeves)	-	500	-

31 Dec, 2029

-
-

10616

DELHI TEST HOUSE (A Unit of Delhii Test House Global LLP), Azadpur

8131406

IS 14587 (2023)

Prelaminated Medium Density Fibre Board - Specification

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-7(Finish)	-	500	NA
Cl-8.1(Dimensions of prelaminated MDF)	-	1500	NA
Cl-8.2(Tolerances)	-	500	NA
Cl-8.2.1(Edge straightness)	-	500	NA
Cl-9.1 S.No-(1), i(Density, kg/m3)	-	1000	NA
Cl-9.1 S.No-(1), ii(Variation from mean density, percent)	-	250	NA
Cl-9.1 S.No-(1), iii(Moisture content, percent)	-	1500	NA
Cl-9.1 S.No-(1), iv(Variation from mean moisture content, percent (absolute))	-	250	NA
Cl-9.1 S.No-(1), v(Linear expansion (thickness swelling in water), due to general absorption after 24 h soaking, percent, Max)	-	1000	NA
Cl-9.1 S.No-(1), vi(Internal bond strength, N/mm2, Min)	-	2000	NA
Cl-9.1 S.No-(1), viii(Modulus of rupture, N/mm2 , Min)	-	2500	NA
Cl-9.1 S.No-(1), ix(Modulus of elasticity, N/mm2 , Min)	-	2000	NA
Cl-9.1 S.No-(1), x,(Screw withdrawal strength, ????????, Min)	-	2000	NA
Cl-9.1 S.No-(1), xi(Formaldehyde content (Fc), mg/100 g for oven dry board)	-	1000	NA
Cl-9.1 S.No-(1), xii(Steady-state formaldehyde emission (Fc), mg/m3)	-	1000	NA
Cl-9.1 S.No-(1), xiii(Abrasion resistance in number of revolutions, Min, (Type 1 to 4))	-	2500	NA
Cl-9.1 S.No-(1), xiv(Resistance to steam/water vapours)	-	500	NA
Cl-9.1 S.No-(1), xv(Resistance to crack)	-	500	NA
Cl-9.1 S.No-(1), xvi(Resistance to a cigarette burn)	-	500	NA
Cl-9.1 S.No-(1), xvii(Resistance to stain)	-	1000	NA
Cl-9.1 S.No-(1), vii,a(After cyclic test)	-	8500	NA
Cl-9.1 S.No-(1), vii,b(After accelerated water resistance test)	-	8500	NA
Cl-7(Finish)	-	-	-
Cl-8.1(Dimensions of prelaminated MDF)	-	-	-
Cl-8.2(Tolerances)	-	-	-
Cl-8.2.1(Edge straightness)	-	-	-
Cl-9.1 S.No-(1), i(Density, kg/m3)	-	-	-
Cl-9.1 S.No-(1), ii(Variation from mean density, percent)	-	-	-
Cl-9.1 S.No-(1), iii(Moisture content, percent)	-	-	-
Cl-9.1 S.No-(1), iv(Variation from mean moisture content, percent (absolute))	-	-	-
Cl-9.1 S.No-(1), v(Linear expansion (thickness swelling in water), due to general absorption after 24 h soaking, percent, Max)	-	-	-
Cl-9.1 S.No-(1), vi(Internal bond strength, N/mm2, Min)	-	-	-
Cl-9.1 S.No-(1), viii(Modulus of rupture, N/mm2 , Min)	-	-	-
Cl-9.1 S.No-(1), ix(Modulus of elasticity, N/mm2 , Min)	-	-	-
Cl-9.1 S.No-(1), x,(Screw withdrawal strength, ????????, Min)	-	-	-
Cl-9.1 S.No-(1), xi(Formaldehyde content (Fc), mg/100 g for oven dry board)	-	-	-
Cl-9.1 S.No-(1), xii(Steady-state formaldehyde emission (Fc), mg/m3)	-	-	-
Cl-9.1 S.No-(1), xiii(Abrasion resistance in number of revolutions, Min, (Type 1 to 4))	-	-	-
Cl-9.1 S.No-(1), xiv(Resistance to steam/water vapours)	-	-	-
Cl-9.1 S.No-(1), xv(Resistance to crack)	-	-	-
Cl-9.1 S.No-(1), xvi(Resistance to a cigarette burn)	-	-	-
Cl-9.1 S.No-(1), xvii(Resistance to stain)	-	-	-
Cl-9.1 S.No-(1), vii,a(After cyclic test)	-	-	-
Cl-9.1 S.No-(1), vii,b(After accelerated water resistance test)	-	-	-

17 Jun, 2027

-
Included w.e.f 16.05.2024 Excluding Cl-11.2 (Specific Requirement) (Eco Mark)

10617

DELHI TEST HOUSE (A Unit of Delhii Test House Global LLP), Azadpur

8131406

IS 12406 (2021)

Medium density fibre boards for general purpose - Specification

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clauses 5.2, 9 and 10.2.2(Density)	-	500	NA
Clauses 5.2, 9 and 10.2.2(Density)	-	500	NA
Clauses 5.2, 9 and 10.2.2(Variation from mean density)	-	500	NA
Clauses 5.2, 9 and 10.2.2(Moisture Content)	-	1000	NA
Clauses 5.2, 9 and 10.2.2(Variation from mean moisture content)	-	500	NA
Clauses 5.2, 9 and 10.2.2(Linear expansion (Thickness Swelling in Water) Due to general Absorption after 24h soaking)	-	1000	NA
Clauses 5.2, 9 and 10.2.2(Internal Bond Strength)	-	1000	NA
Clauses 5.2, 9 and 10.2.2(Internal Bond strength (i) (After Cyclic test) (ii) (After accelerated water resistance test))	-	1000	NA
Clauses 5.2, 9 and 10.2.2(Modulus of Rupture a) Avg. Value b) Min. Individual)	-	2000	NA
Clauses 5.2, 9 and 10.2.2(Modulus of Elasticity a) Avg. Value b) Min. Individual)	-	2000	NA
Clauses 5.2, 9 and 10.2.2(Screw withdrawl strength (i) Face (ii) Edge (For thickness >12mm))	-	1000	NA
Clauses 5.2, 9 and 10.2.2(Formaldehyde Content (i) For Formaldehyde Class, E1 (ii) For Formaldehyde Class, E2)	-	2000	NA
Clauses 5.2, 9 and 10.2.2(Steady State Formaldehyde emission (Fc (i) For Formaldehyde Class, E1 (ii) For Formaldehyde Class, E2)	-	2000	NA
8(DIMENSIONS AND TOLERANCES)	-	1000	NA

17 Jun, 2027

-
Included w.e.f 16.05.2024

10618

BIS, Eastern Regional Laboratory (ERL)

None

IS 13334 : Part 2 (2014)

Skimmed milk powder - Specification: Part 2 extra grade (First Revision)

10430 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Table 1 (ix) (Bacterial count (IS 5402))	-
Table 1 (x) (Coliform count (IS 5401 - Part 1))	-
Table 1 (xi) (Escherichia coli (IS 5887 - Part 1))	-
Table 1 (xii) (Coagulase positive Staphylococcus aureus (IS 5887 - Part 2))	-
Table 1 (xiii) (Salmonella (IS 5887 - Part 3))	-
Table 1 (xiv)(a) (Spore Count: a)Aerobic (Bacillus cereus) Type m (IS 5887 - Part 6))	-
Table 1 (xiv)(b) (Spore Count: b) Anaerobic (Sulfite reducing Clostridia) Type m (ISO 15213 : 2003))	-
Table 1 (xv) (Listeria monocytogenes (IS 14988 - Part 2 : 2001))	-
Clause no 4 (Description)	-
Cl.5.4 (Flavour & Taste)	-
Cl.5.7, Table 1, Sl No.-(i) (Moisture- IS 16072)	-
Cl.5.7, Table 1, Sl No.-(ii) (Milk protein in milk solids not fat- IS 72192)	-
Cl.5.7, Table 1, Sl No.-(iii) (Milk fat - IS 11721 or Annex B of IS 13334)	-
Cl.5.7, Table 1, Sl No.-(iv) (Insolubility index- IS 12759)	-
Cl.5.7, Table 1, Sl No.-(v) (Total ash (on dry basis) -Annex B of IS 14433)	-
Cl.5.7, Table 1, Sl No.-(vi) (Titratable acidity-IS 11766)	-
Cl.5.7, Table 1, Sl No.-(viii) (Scorched particles-IS 13500)	-
Cl 4.0 (Description)	-
Cl.5.4 (Flavour & Taste)	-

-
Shelf life to be declared; Excluding Lactate Content

10619

DELHI TEST HOUSE (A Unit of Delhii Test House Global LLP), Azadpur

8131406

IS 13428 (2024)

PACKAGED NATURAL MINERAL WATER - SPECIFICATION Third Revision

20500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1.1(Escherichia coli)	-	500	NA
6.1.2(Coliform)	-	500	NA
6.1.3(Faecal Streptococci)	-	500	NA
6.1.4(Sulphite Reducing Anaerobe)	-	500	NA
6.1.5(Pseudomonas aeruginosa)	-	500	NA
6.1.6(Yeast and moould)	-	500	NA
6.1.7(Salmonella)	-	500	NA
6.1.8(Vibrio Cholera)	-	500	NA
6.2/Table 1/i(Colour)	-	200	NA
6.2/Table 1/ii(Odour)	-	250	NA
6.2/Table 1/iii(Taste)	-	250	NA
6.2/Table 1/iv(Turbidity)	-	250	NA
6.2/Table 1/v(Total Dissoved)	-	250	NA
6.2/Table 1/vi(pH Value)	-	200	NA
6.2/Table 2/i(Nitrate)	-	250	NA
6.2/Table 2/ii(Nitrite)	-	250	NA
6.2/Table 2/iii(Sulphide)	-	250	NA
6.2/Table 2/iv(Manganese)	-	250	NA
6.2/Table 2/v(Copper)	-	250	NA
6.2/Table 2/vi(Fluoride)	-	250	NA
6.2/Table 2/vii(Barium)	-	250	NA
6.2/Table 2/viii(Antimony)	-	250	NA
6.2/Table 2/ix(Borate)	-	250	NA
6.2/Table 2/x(Silver)	-	250	NA
6.2/Table 2/xi(Chloride)	-	250	NA
6.2/Table 2/xii(Sulphate)	-	250	NA
6.2/Table 2/xiii(Magnesium)	-	250	NA
6.2/Table 2/xiv(Calcium)	-	250	NA
6.2/Table 2/xv(Sodium)	-	250	NA
6.2/Table 2/xvi(Alkalinity)	-	250	NA
6.2/Table 2/xvii(Selenium)	-	250	NA
6.2/Table 2/xviii(Mineral Oil)	-	250	NA
6.2/Table 2/xix(Phenolic Compounds)	-	250	NA
6.2/Table 2/xx(Anionic Surface active agents)	-	250	NA
6.2/Table 3/i(Arsenic)	-	250	NA
6.2/Table 3/ii(Cadmium)	-	250	NA
6.2/Table 3/iii(Cyanide)	-	250	NA
6.2/Table 3/iv(Chromium)	-	250	NA
6.2/Table 3/v(Mercury)	-	250	NA
6.2/Table 3/vi(Lead)	-	250	NA
6.2/Table 3/vii(Nickel)	-	250	NA
6.2/Table 3/viii(Polychlorinated biphenyle (PCB))	-	200	NA
6.2/Table 3/ix(Polynuclear aromatic hydrocarbons)	-	200	NA
Cl- 6.3, Annex N (i)(P,P -DDE)	-	200	NA
Cl- 6.3, Annex N (i)(O,P -DDE)	-	200	NA
Cl- 6.3, Annex N (i)(O,P -DDT)	-	200	NA
Cl-6.3, Annex N (i)(P,P- DDD)	-	200	NA
Cl-6.3, Annex N (i)(O,P-DDD)	-	200	NA
Cl- 6.3, Annex N (ii)(γ-HCH (lindane))	-	200	NA
Cl- 6.3, Annex N (iii)(α-HCH)	-	200	NA
Cl- 6.3, Annex N (iii)(β-HCH)	-	200	NA
Cl- 6.3, Annex N (iii)(δ - HCH)	-	200	NA
Cl- 6.3, Annex N (iv)(Endosulfan - α)	-	200	NA
Cl- 6.3, Annex N (iv)(Endosulfan - β)	-	200	NA
Cl- 6.3, Annex N (iv)(Endosulfan - sulphate)	-	200	NA
Cl- 6.3, Annex N (v)(Monocrotophos)	-	200	NA
Cl- 6.3, Annex N (viii)(Phorate and its oxygen analogue)	-	200	NA
Cl- 6.3, Annex N (viii)(phorate sulphoxide)	-	200	NA
Cl- 6.3, Annex N (viii)(phorate sulphone)	-	200	NA
Cl- 6.3, Annex N (ix)(2,4-D)	-	200	NA
Cl- 6.3, Annex N (x)(Butachlor)	-	200	NA
Cl- 6.3, Annex N (xi)(Isoproturon)	-	200	NA
Cl- 6.3, Annex N (xii)(Alachlor)	-	200	NA
Cl- 6.3, Annex N (xiii)(Atrazine)	-	200	NA
Cl- 6.3, Annex N (xiv)(Methyl parathion)	-	200	NA
Cl- 6.3, Annex N (xiv)(Methyl paraoxon)	-	200	NA
Cl- 6.3, Annex N (xv)(Malathion)	-	200	NA
Cl- 6.3, Annex N (xv)(malaoxon)	-	200	NA
Cl- 6.3, Annex N (xvi)(Aldrin)	-	200	NA
6.2/Table 3/x(Uranium)	-	200	NA
Cl- 6.3, Annex N (i)(P,P- DDT)	-	200	NA
Cl- 6.3, Annex N (vi)(Ethion)	-	200	NA
Cl- 6.3, Annex N (vii)(Chlorpyrifos)	-	200	NA
6.1.1(Escherichia coli)	-	500	NA
6.1.2(Coliform)	-	500	NA
6.1.3(Faecal Streptococci)	-	500	NA
6.1.4(Sulphite Reducing Anaerobe)	-	500	NA
6.1.5(Pseudomonas aeruginosa)	-	500	NA
6.1.6(Yeast and moould)	-	500	NA
6.1.7(Salmonella)	-	500	NA
6.1.8(Vibrio Cholera)	-	500	NA
6.2/Table 1/i(Colour)	-	200	NA
6.2/Table 1/ii(Odour)	-	200	NA
6.2/Table 1/iii(Taste)	-	200	NA
6.2/Table 1/iv(Turbidity)	-	200	NA
6.2/Table 1/v(Total Dissoved)	-	200	NA
6.2/Table 1/vi(pH Value)	-	200	NA
6.2/Table 2/i(Nitrate)	-	250	NA
6.2/Table 2/ii(Nitrite)	-	250	NA
6.2/Table 2/iii(Sulphide)	-	250	NA
6.2/Table 2/iv(Manganese)	-	250	NA
6.2/Table 2/v(Copper)	-	250	NA
6.2/Table 2/vi(Fluoride)	-	250	NA
6.2/Table 2/vii(Barium)	-	250	NA
6.2/Table 2/viii(Antimony)	-	250	NA
6.2/Table 2/ix(Borate)	-	250	NA
6.2/Table 2/x(Silver)	-	250	NA
6.2/Table 2/xi(Chloride)	-	250	NA
6.2/Table 2/xii(Sulphate)	-	250	NA
6.2/Table 2/xiii(Magnesium)	-	250	NA
6.2/Table 2/xiv(Calcium)	-	250	NA
6.2/Table 2/xv(Sodium)	-	250	NA
6.2/Table 2/xvi(Alkalinity)	-	250	NA
6.2/Table 2/xvii(Selenium)	-	250	NA
6.2/Table 2/xviii(Mineral Oil)	-	250	NA
6.2/Table 2/xix(Phenolic Compounds)	-	250	NA
6.2/Table 2/xx(Anionic Surface active agents)	-	250	NA
6.2/Table 3/i(Arsenic)	-	250	NA
6.2/Table 3/ii(Cadmium)	-	250	NA
6.2/Table 3/iii(Cyanide)	-	250	NA
6.2/Table 3/iv(Chromium)	-	250	NA
6.2/Table 3/v(Mercury)	-	250	NA
6.2/Table 3/vi(Lead)	-	250	NA
6.2/Table 3/vii(Nickel)	-	250	NA
6.2/Table 3/viii(Polychlorinated biphenyle (PCB))	-	250	NA
6.2/Table 3/ix(Polynuclear aromatic hydrocarbons)	-	250	NA
Cl- 6.3, Annex N (i)(P,P -DDE)	-	250	NA
Cl- 6.3, Annex N (i)(O,P -DDE)	-	250	NA
Cl- 6.3, Annex N (i)(O,P -DDT)	-	250	NA
Cl-6.3, Annex N (i)(P,P- DDD)	-	250	NA
Cl-6.3, Annex N (i)(O,P-DDD)	-	250	NA
Cl- 6.3, Annex N (ii)(γ-HCH (lindane))	-	250	NA
Cl- 6.3, Annex N (iii)(α-HCH)	-	250	NA
Cl- 6.3, Annex N (iii)(β-HCH)	-	250	NA
Cl- 6.3, Annex N (iii)(δ - HCH)	-	250	NA
Cl- 6.3, Annex N (iv)(Endosulfan - α)	-	250	NA
Cl- 6.3, Annex N (iv)(Endosulfan - β)	-	250	NA
Cl- 6.3, Annex N (iv)(Endosulfan - sulphate)	-	250	NA
Cl- 6.3, Annex N (v)(Monocrotophos)	-	250	NA
Cl- 6.3, Annex N (viii)(Phorate and its oxygen analogue)	-	250	NA
Cl- 6.3, Annex N (viii)(phorate sulphoxide)	-	250	NA
Cl- 6.3, Annex N (viii)(phorate sulphone)	-	250	NA
Cl- 6.3, Annex N (ix)(2,4-D)	-	250	NA
Cl- 6.3, Annex N (x)(Butachlor)	-	250	NA
Cl- 6.3, Annex N (xi)(Isoproturon)	-	250	NA
Cl- 6.3, Annex N (xii)(Alachlor)	-	250	NA
Cl- 6.3, Annex N (xiii)(Atrazine)	-	250	NA
Cl- 6.3, Annex N (xiv)(Methyl parathion)	-	250	NA
Cl- 6.3, Annex N (xiv)(Methyl paraoxon)	-	250	NA
Cl- 6.3, Annex N (xv)(Malathion)	-	250	NA
Cl- 6.3, Annex N (xv)(malaoxon)	-	250	NA
Cl- 6.3, Annex N (xvi)(Aldrin)	-	250	NA
6.2/Table 3/x(Uranium)	-	250	NA
Cl- 6.3, Annex N (i)(P,P- DDT)	-	250	NA
Cl- 6.3, Annex N (vi)(Ethion)	-	250	NA
Cl- 6.3, Annex N (vii)(Chlorpyrifos)	-	250	NA
6.1.1(Escherichia coli)	-	-	-
6.1.2(Coliform)	-	-	-
6.1.3(Faecal Streptococci)	-	-	-
6.1.4(Sulphite Reducing Anaerobe)	-	-	-
6.1.5(Pseudomonas aeruginosa)	-	-	-
6.1.6(Yeast and moould)	-	-	-
6.1.7(Salmonella)	-	-	-
6.1.8(Vibrio Cholera)	-	-	-
6.2/Table 1/i(Colour)	-	-	-
6.2/Table 1/ii(Odour)	-	-	-
6.2/Table 1/iii(Taste)	-	-	-
6.2/Table 1/iv(Turbidity)	-	-	-
6.2/Table 1/v(Total Dissoved)	-	-	-
6.2/Table 1/vi(pH Value)	-	-	-
6.2/Table 2/i(Nitrate)	-	-	-
6.2/Table 2/ii(Nitrite)	-	-	-
6.2/Table 2/iii(Sulphide)	-	-	-
6.2/Table 2/iv(Manganese)	-	-	-
6.2/Table 2/v(Copper)	-	-	-
6.2/Table 2/vi(Fluoride)	-	-	-
6.2/Table 2/vii(Barium)	-	-	-
6.2/Table 2/viii(Antimony)	-	-	-
6.2/Table 2/ix(Borate)	-	-	-
6.2/Table 2/x(Silver)	-	-	-
6.2/Table 2/xi(Chloride)	-	-	-
6.2/Table 2/xii(Sulphate)	-	-	-
6.2/Table 2/xiii(Magnesium)	-	-	-
6.2/Table 2/xiv(Calcium)	-	-	-
6.2/Table 2/xv(Sodium)	-	-	-
6.2/Table 2/xvi(Alkalinity)	-	-	-
6.2/Table 2/xvii(Selenium)	-	-	-
6.2/Table 2/xviii(Mineral Oil)	-	-	-
6.2/Table 2/xix(Phenolic Compounds)	-	-	-
6.2/Table 2/xx(Anionic Surface active agents)	-	-	-
6.2/Table 3/i(Arsenic)	-	-	-
6.2/Table 3/ii(Cadmium)	-	-	-
6.2/Table 3/iii(Cyanide)	-	-	-
6.2/Table 3/iv(Chromium)	-	-	-
6.2/Table 3/v(Mercury)	-	-	-
6.2/Table 3/vi(Lead)	-	-	-
6.2/Table 3/vii(Nickel)	-	-	-
6.2/Table 3/viii(Polychlorinated biphenyle (PCB))	-	-	-
6.2/Table 3/ix(Polynuclear aromatic hydrocarbons)	-	-	-
Cl- 6.3, Annex N (i)(P,P -DDE)	-	-	-
Cl- 6.3, Annex N (i)(O,P -DDE)	-	-	-
Cl- 6.3, Annex N (i)(O,P -DDT)	-	-	-
Cl-6.3, Annex N (i)(P,P- DDD)	-	-	-
Cl-6.3, Annex N (i)(O,P-DDD)	-	-	-
Cl- 6.3, Annex N (ii)(γ-HCH (lindane))	-	-	-
Cl- 6.3, Annex N (iii)(α-HCH)	-	-	-
Cl- 6.3, Annex N (iii)(β-HCH)	-	-	-
Cl- 6.3, Annex N (iii)(δ - HCH)	-	-	-
Cl- 6.3, Annex N (iv)(Endosulfan - α)	-	-	-
Cl- 6.3, Annex N (iv)(Endosulfan - β)	-	-	-
Cl- 6.3, Annex N (iv)(Endosulfan - sulphate)	-	-	-
Cl- 6.3, Annex N (v)(Monocrotophos)	-	-	-
Cl- 6.3, Annex N (viii)(Phorate and its oxygen analogue)	-	-	-
Cl- 6.3, Annex N (viii)(phorate sulphoxide)	-	-	-
Cl- 6.3, Annex N (viii)(phorate sulphone)	-	-	-
Cl- 6.3, Annex N (ix)(2,4-D)	-	-	-
Cl- 6.3, Annex N (x)(Butachlor)	-	-	-
Cl- 6.3, Annex N (xi)(Isoproturon)	-	-	-
Cl- 6.3, Annex N (xii)(Alachlor)	-	-	-
Cl- 6.3, Annex N (xiii)(Atrazine)	-	-	-
Cl- 6.3, Annex N (xiv)(Methyl parathion)	-	-	-
Cl- 6.3, Annex N (xiv)(Methyl paraoxon)	-	-	-
Cl- 6.3, Annex N (xv)(Malathion)	-	-	-
Cl- 6.3, Annex N (xv)(malaoxon)	-	-	-
Cl- 6.3, Annex N (xvi)(Aldrin)	-	-	-
6.2/Table 3/x(Uranium)	-	-	-
Cl- 6.3, Annex N (i)(P,P- DDT)	-	-	-
Cl- 6.3, Annex N (vi)(Ethion)	-	-	-
Cl- 6.3, Annex N (vii)(Chlorpyrifos)	-	-	-
Cl-6.1.3(Staphylococcus aureus)	-	-	-
Cl-6.1.7(Shigella)	-	-	-
Cl-6.1.8(V. parahaemolyticus)	-	-	-
Cl-6.3, Annex N (XVI)(Dieldrin)	-	-	-

17 Jun, 2027

-
Included w.e.f 20.12.2024 Exclusion : Cl 6.2 Table 4(i) Alpha emitters Cl 6.2 Table 4(ii) Beta emitters

10620

Delhi Test House (A Unit of Delhii Test House Global LLP) (50) Kundli, Sonipat

9127026

IS 3315 (2019)

Evaporative air coolers (Desert Coolers?) - Specification (Third Revision)

70000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
15.3(BIS Certification Marking)	-	1000	-
15( MARKING AND INFORMATION)	-	750	-
10.5( Stable Operating Conditions)	-	2000	-
10.2(Standard Ratings)	-	1500	-
10(GENERAL TEST CONDITIONS)	-	2000	-
9.5( Energy Consumption)	-	1500	-
9.3(Noise Level)	-	2000	-
9(ADDITIONAL REQUIREMENTS FOR ECO-MARK)	-	1200	-
8.3.1 ,8.4.2, & 6.2(Cooling Efficiency and Air Delivery Test)	-	15000	-
8.2.8, 8.4.3,& 6.2©(Power Consumption Test)	-	8800	-
8.2.7( Finish )	-	750	-
8.2.6( Earthing Connections Tests)	-	3000	-
8.2.5( Leakage Current)	-	4000	-
8.2.4(Insulation Resistance Test)	-	4500	-
8.2.3 (High Voltage Tests)	-	5000	-
8.2.2(Protection against Electric Shock )	-	3000	-
6(PERFORMANCE REQUIREMENTS)	-	3500	-
15.3(BIS Certification Marking)	-	1000	-
15( MARKING AND INFORMATION)	-	750	-
10.5( Stable Operating Conditions)	-	2000	-
10.2(Standard Ratings)	-	1500	-
10(GENERAL TEST CONDITIONS)	-	2000	-
9.5( Energy Consumption)	-	1500	-
9.3(Noise Level)	-	2000	-
9(ADDITIONAL REQUIREMENTS FOR ECO-MARK)	-	1200	-
8.3.1 ,8.4.2, & 6.2(Cooling Efficiency and Air Delivery Test)	-	15000	-
8.2.8, 8.4.3,& 6.2©(Power Consumption Test)	-	8800	-
8.2.7( Finish )	-	750	-
8.2.6( Earthing Connections Tests)	-	3000	-
8.2.5( Leakage Current)	-	4000	-
8.2.4(Insulation Resistance Test)	-	4500	-
8.2.3 (High Voltage Tests)	-	5000	-
8.2.2(Protection against Electric Shock )	-	3000	-
6(PERFORMANCE REQUIREMENTS)	-	3500	-
5(Manufacture and construction)	-	2500	-
7(Electrical equipment)	-	4000	-
8.2.1(General running tests)	-	500	-
8.3.2(Rated frequency)	-	1500	-
8.4.1 a)(Verification of marking)	-	2000	-

23 Jun, 2028

-
Included w.e.f. 03.05.2024

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number