BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15122 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

1231

ATCC TEST LABS LLP

8172626

IS 7098 : Part 1 (2025)

Crosslinked Polyethylene Insulated Thermoplastic Sheathed Cables - Specification Part 1 For Working Voltages up to and Including 1 100 Volts (Second Revision)

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(Conductors -Material)	-	1000	-
Cl-5, Table-1 (i)(Tensile strength)	-	1000	-
Cl-5, Table-1 (ii) (a)(Elongation at break- Ageing in air oven)	-	2000	-
Cl-5, Table-1 (ii) (b)(Variation in tensile strength, from that without ageing)	-	2000	-
Cl-5, Table-1 (ii) (c)(Variation in elongation at break, from that without ageing)	-	2000	-
Cl-5, Table-1 (iii) (a)(Hot set- Treatment;)	-	2000	-
Cl-5, Table-1 (iii) (b)(Hot set- Elongation under load)	-	2000	-
Cl-5, Table-1 (iii) (c)(Hot set- Permanent elongation after cooling)	-	2000	-
Cl-5, Table-1 (iv)(Shrinkage)	-	1000	-
Cl-5, Table-1 (v)(Water absorption (gravimetric))	-	5000	-
Cl-5, Table-1 (vi)(Volume resistivity)	-	2000	-
Cl-6.1 (a)(Fillers and inner sheath- Vulcanized or unvulcanized rubber)	-	1000	-
Cl-6.1 (B)(Fillers and inner sheath- Thermoplastic materials)	-	1000	-
Cl-7(Armouring)	-	1000	-
Cl-8(Outer Sheath)	-	1000	-
Cl-10.3(Tolerance on Thickness of Insulation)	-	2000	-
Cl-11(Core Identification)	-	1000	-
Cl-12(Laying up of Cores)	-	1000	-
Cl-13(Inner Sheath (Common Covering))	-	1000	-
Cl-14.1(Armouring- Application)	-	1000	-
Cl-14.1.2(armour round wires/formed wires)	-	1000	-
Cl-14.2(Type of Armour)	-	1000	-
Cl-14.3(Dimensions)	-	2000	-
Cl-14.4(Joints)	-	2000	-
Cl-14.5(Resistance)	-	2000	-
Cl-15.3(Thickness of Outer Sheath)	-	2000	-
Cl-16.1 (i) (a)(Test on conductor: Annealing test (for copper);)	-	1000	-
Cl-16.1 (i) (b)(Test on conductor: Tensile test (for aluminium);)	-	1000	-
Cl-16.1 (i) (c)(Test on conductor: Wrapping test (for aluminium);)	-	1000	-
Cl-16.1 (i) (d)(Test on conductor: Resistance test)	-	2000	-
Cl-14.6 (a)(Physical tests on round wires/formed wires- Tensile strength)	-	2000	-
Cl-14.6 (b)(Physical tests on round wires/formed wires- Elongation at break)	-	2000	-
Cl-14.6 (c)(Physical tests on round wires/formed wires- Torsion test for round wires)	-	2000	-
Cl-14.6 (d)(Physical tests on round wires/formed wires- Winding test for formed wires)	-	2000	-
Cl-14.6 (e)(Physical tests on round wires/formed wires- Uniformity of zinc coating)	-	2000	-
Cl-14.6 (f)(Physical tests on round wires/formed wires- Mass of zinc coating)	-	2000	-
Cl-14.6 (g)(Physical tests on round wires/formed wires- Resistivity.)	-	2000	-
Cl-10, 13, 15(Test for thickness of insulation and sheath)	-	2000	-
Cl-16.1 (v) (1)(PVC Sheath- Tensile strength and elongation at break;)	-	3000	-
Cl-16.1 (v) (2)(PVC Sheath- Ageing in air oven)	-	3000	-
Cl-16.1 (v) (3)(PVC Sheath- Loss of mass in air oven)	-	3000	-
Cl-16.1 (v) (5)(PVC Sheath- Hot deformation test)	-	2000	-
Cl-16.1 (v) (6)(PVC Sheath- Heat shock test)	-	2000	-
Cl-16.1 (v) (7)(PVC Sheath- Thermal stability)	-	2000	-
Cl-8.3-Table 1A(PE Sheath- Carbon black content)	-	2000	-
Cl-8.3-Table 1A(PE Sheath- Tensile strength and elongation at break before and after ageing)	-	2000	-
Cl-8.3-Table 1A(PE Sheath- Hot deformation)	-	2000	-
Cl-8.3-Table 1A(PE Sheath- Shrinkage test.)	-	1000	-
Cl- Table 1B(LSHF Sheath- Tensile strength and elongation at break before and after ageing)	-	2000	-
Cl- Table 1B(LSHF Sheath- Hot deformation)	-	2000	-
Cl- Table 1B(LSHF Sheath- Water absorption test)	-	5000	-
Cl- Table 1B(LSHF Sheath- Shrinkage test)	-	2000	-
Cl-17.2(High voltage test)	-	5000	-
Cl-17.3(Flammability test)	-	2000	-
Cl-17.4(Oxygen index test (FR, FR-LSH or LSHF Sheath))	-	5000	-
Cl-17.5(Flame retardance test on single cable)	-	2000	-
Cl-17.6(Flame retardance test on bunched cables (FR, FR-LSH or LSHF Sheathed Cables))	-	10000	-
Cl-17.7(Test for halogen acid evolution (FR-LSH or LSHF Outer Sheath))	-	2000	-
Cl-17.8(Smoke density test (FR-LSH or LSHF Sheath))	-	5000	-
Cl-17.9(Temperature index test; (FR, FR-LSH or LSHF Sheath))	-	5000	-
Cl-17.10(Test for pH and conductivity of LSHF Sheath)	-	5000	-
Cl-17.11(Test for light transmission for LSHF Sheathed Cables)	-	5000	-
Cl-16.4 (i)(Cold bend test for outer sheath)	-	2000	-
Cl-16.4 (ii)(Cold impact test for outer sheath)	-	2000	-
Cl-16.4 (iii)(Cold elongation test for LSHF sheath)	-	2000	-
Cl. 9(Conductor - Regarding Construction Compliance)	-	1000	-
Cl. 10.4(Application of Insulation)	-	1000	-
Cl. 13.3(Thickness of Inner sheath)	-	2000	-
Cl. 15.1(Application of Outer sheath)	-	1000	-
Cl. 15.2(Clour of Outer sheath)	-	1000	-

15 Jun, 2029

-
Included w.e.f. 10.02.2026

1232

Aaditech Test and Calibration Lab LLP

8179926

IS 12406 (2025)

Medium Density Fibre Boards of Wood and Other Lignocellulosic Materials for General Purpose - Specification ( Third Revision )

All

9300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
As per Clause 7(Finish --IS 2380 (Part 2), IS 2380 (Part 3) & Visual)	-	300	-
As per Clause 8, Table 2(Length -IS 2380 (Part 2))	-	300	-
As per Clause 8, Table 2(Width - IS 2380 (Part 2))	-	300	-
As per Clause 8, Table 2(Thickness - IS 2380 (Part 2))	-	300	-
As per Clause 8, Table 2(Squareness, Max. - IS 2380 (Part 2))	-	300	-
As per Clause 8, Table 2(Edge straightness, Max.)	-	300	-
As per Clause 9.1 Table 3(Density -IS 2380 (Part 3))	-	700	-
As per Clause 9.1 Table 3(Variation from mean density, --IS 2380 (Part 3))	-	700	-
As per Clause 9.1 Table 3(Moisture Content -IS 2380 (Part 3))	-	700	-
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Modulus of rupture (MoR), Min.-IS 2380 (Part 4))	-	1000	-
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Modulus of elasticity (MoE), Min. -(IS 2380 (Part 4))	-	1000	-
As per Clause 9.1 Table 4, Table 5, Table 6, Table7(Internal bond strength, Min. - IS 2380 (Part 5))	-	1000	-
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(24 h thickness swelling (due to general absorption) Max. - IS 2380 (Part 17))	-	1000	-
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Screw withdrawal strength (face) , Min. -IS 2380 (Part 4))	-	1000	-
As per Clause 9.1 Table 4, Table 5, table 6, Table 7(Screw withdrawal strength (edge) , Min. -IS 2380 (Part 4))	-	1000	-
As per Clause 9.1 , Table 5, Table 6, Table 7(Moisture Resistance : Option 1 : Cyclic test (1. )Internal bond strength Min. -IS 2380 (Part 5) see note 1)	-	1000	-
As per Clause 9.1 , Table 5, Table 6, Table 7(Moisture Resistance : Option 2 : Boil test (1.) Internal bond strength , Min.- IS 2380 (Part 5) see note 2)	-	1000	-
As per Clause 9.1 , Table 9(Formaldehyde content Fc, mg/100 g for oven dry board -IS 13745)	-	2000	-
As per Clause 9.1 , Table 9(Steady-state formaldehyde emission, Fc, mg/m3 (optional test))	-	0	-
Cl-5.1(Wood and Any Other Lignocellulosic Material)	-	0	-
Cl-5.3(Sizing Material)	-	0	-
Cl-5.4(Preservative Treatment)	-	0	-
Cl-6(MANUFACTURE)	-	200	-
Cl-5.2(Adhesive)	-	1500	-

-
Included w.e.f 30.01.2026 Clause 9.1 , Table 9 (Steady-state formaldehyde emission, Fc, mg/m3 (optional test))

1233

Aaditech Test and Calibration Lab LLP

8179926

IS 848 (2025)

Synthetic Resin Adhesives for Plywood (Phenolic, Aminoplastic and Bio-Materials Based) - Specification ( Third Revision )

All

6300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
As per Clause 4 Table 1(TYPES)	-	200	-
As per Clause 6.6(SETTING TIMES AND CONDITIONS)	-	200	-
As per Clause 7.3.2 Table 1(i)(Cyclic Test For BWP Type)	-	3500	-
As per Clause 7.3.2 Table 1(ii)(Cyclic Test For BWR Type)	-	3500	-
As per Clause 7.3.2 Table 1(iii)(Cyclic Test For MR Type)	-	3500	-
As per Clause 7.4(Acidity And Alkalinity (pH))	-	2200	-
As per Clause 9(Marking)	-	200	-

-
Included w.e.f 17.02.2026

1234

Sleen India Biz venture Private Limited, Agra

9139736

IS 16725 (2018)

Textiles - Tactical 3 points sling universal - Specification

45300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 3.2.2 & Table 2 (i)(Nature of filament)	-	500	-
Clause 3.2.2 & Table 2 (ii)(Width, mm)	-	500	-
Clause 3.2.2 & Table 2 (iii)(Mass per linear meter of tape, g)	-	500	-
Clause 3.2.2 & Table 2 (iv)(Breaking strength (full width × 20 cm), N, Min)	-	1000	-
Clause 3.2.2 & Table 2 (v)(Colour fastness to light)	-	2000	-
Clause 3.2.2 & Table 2 (vi)(Colour fastness to rubbing: (a) Dry & (b) Wet)	-	800	-
Clause 3.2.2 & Table 2 (vii)(Colour fastness to washing C(3) (a) Change in colour)	-	800	-
Clause 3.2.2 & Table 2 (viii)(Colour fastness to washing C(3) (b) Staining on adjacent fabric)	-	800	-
Clause 3.2.2 & Table 2 (ix)(Dimensional change due to relaxation, both directions, percent, Max)	-	500	-
Clause 3.2.2 & Table 2 (x)(pH value of aqueous extract (Cold method))	-	500	-
Clause 3.2.3 & Table 4 (i)(Top layer (Disruptive printed): (a) Nature of filament yarn)	-	500	-
Clause 3.2.3 & Table 4 (i)(Top layer (Disruptive printed): ( b) End/dm, Min)	-	500	-
Clause 3.2.3 & Table 4 (i)(Top layer (Disruptive printed): (c) Picks/dm, Min)	-	500	-
Clause 3.2.3 & Table 4 (i)(Top layer (Disruptive printed): (d) Width, mm)	-	500	-
Clause 3.2.3 & Table 4 (i)(Top layer (Disruptive printed): (e) Mass, g/sq. m)	-	500	-
Clause 3.2.3 & Table 4 (i)(Top layer (Disruptive printed): (f) Colour fastness to washing C(3): (1) Change in colour)	-	500	-
Clause 3.2.3 & Table 4 (i)(Top layer (Disruptive printed): (f) Colour fastness to washing C(3): (2) Staining on adjacent fabric)	-	500	-
Clause 3.2.3 & Table 4 (i)(Top layer (Disruptive printed): (g) Colour fastness to rubbing: (1) Dry & (2) Wet)	-	500	-
Clause 3.2.3 & Table 4 (i)(Top layer (Disruptive printed): (h) Colour fastness to light)	-	500	-
Clause 3.2.3 & Table 4 (ii)(Bottom layer (Nylon Tape – 50 mm wide): (a) Nature of filament yarn)	-	500	-
Clause 3.2.3 & Table 4 (ii)(Bottom layer (Nylon Tape – 50 mm wide): (b) Width, mm)	-	500	-
Clause 3.2.3 & Table 4 (ii)(Bottom layer (Nylon Tape – 50 mm wide): (c) Mass per linear meter, g)	-	500	-
Clause 3.2.3 & Table 4 (ii)(Bottom layer (Nylon Tape – 50 mm wide): (d) Colour fastness to washing C(3): (1) Change in colour)	-	500	-
Clause 3.2.3 & Table 4 (ii)(Bottom layer (Nylon Tape – 50 mm wide): (d) Colour fastness to washing C(3): (2) Staining on adjacent fabric)	-	500	-
Clause 3.2.3 & Table 4 (ii)("Bottom layer (Nylon Tape – 50 mm wide): (e) Colour fastness to rubbing: 1) Dry 2) Wet ")	-	500	-
Clause 3.2.3 & Table 4 (ii)(Bottom layer (Nylon Tape – 50 mm wide): (f) Colour fastness to light)	-	500	-
Clause 4(STITCHING)	-	500	-
Clause 5(WORKMANSHIP AND FINISH)	-	500	-
Clause 7(MARKING)	-	500	-
Clause 8(PACKING)	-	500	-
3.2.1 - Table 1 - (i)(Warp)	-	1000	-
3.2.1 - Table 1 - (ii)(Weft)	-	1000	-
3.2.1 - Table 1 - (ii)(Weft)	-	1000	-
3.2.1 - Table 1 - (iii)(Binding end)	-	1000	-
3.2.2 - Table 2 -(i)(Name of Filament)	-	500	-
3.2.2 - Table 2 -(ii)(Width)	-	500	-
3.2.2 - Table 2 -(iii)(Mass per linear meter)	-	500	-
3.2.2 - Table 2 -(iv)(Breaking strength)	-	1000	-
3.2.2 - Table 2 -(v)(Colour fastness to light)	-	2000	-
3.2.2 - Table 2 -(vi)(Colour fastness to rubbing)	-	800	-
3.2.2 - Table 2 -(vii)(Colour fastness to washing)	-	800	-
3.2.2 - Table 2 -(viii)(Dimensional change due to relaxation)	-	500	-
3.2.2 - Table 2 -(ix)(ph value of aqueous extract)	-	500	-
3.2.3 - Table 3 - (i)(Warp)	-	1000	-
3.2.3 - Table 3 - (ii)(Weft)	-	1000	-
3.2.3 - Table 4 - (i) - (a)(Nature of filament yarn)	-	1000	-
3.2.3 - Table 4 - (i) - (b)(End/ dm)	-	500	-
3.2.3 - Table 4 - (i) - (c)(Picks/dm)	-	500	-
3.2.3 - Table 4 - (i) - (d)(Width)	-	500	-
3.2.3 - Table 4 - (i) - (e)(Mass gram per meter square)	-	1000	-
3.2.3 - Table 4 - (i) - (f)(Colour fastness to washing)	-	800	-
3.2.3 - Table 4 - (i) - (g)(Colour fastness to rubbing)	-	800	-
3.2.3 - Table 4 - (i) - (h)(Colour fastness to light)	-	2000	-
3.2.3 - Table 4 - (ii) - (a)(Nature of filament yarn)	-	500	-
3.2.3 - Table 4 - (ii) - (b)(Width)	-	500	-
3.2.3 - Table 4 - (ii) - (c)(Mass per linear meter)	-	500	-
3.2.3 - Table 4 - (ii) - (c)(Width)	-	500	-
3.2.3 - Table 4 - (ii) - (c)(Mass per linear meter)	-	500	-
3.2.3 - Table 4 - (ii) - (d)(Colour fastness to washing)	-	800	-
3.2.3 - Table 4 - (ii) - (e)(Colour fastness to rubbing)	-	800	-
3.2.3 - Table 4 - (ii) - (f)(Colour fastness to light)	-	2000	-
5(Workmanship and finish)	-	800	-
7(Marking)	-	500	-
8(Packing)	-	500	-
3.2.4(Dimensions)	-	5000	-
3.2.5(metallic parts)	-	8000	-
Cl-3.2.3(Dyes used for dyeing and printing)	-	1000	-
3.2.3 - Table 3 - (iii)(Blinding end)	-	1000	-

-
Included w.e.f 17.02.2026

1235

DELHI TEST HOUSE (65) KUNDLI-2 SONIPAT

9138006

IS 12444 (2020)

Copper Wire Rods for Electrical Applications — Specification ( First Revision )

22500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1 Table-1(Te)	-	500	-
5.1 Table-1(Se)	-	500	-
5.1 Table-1(Bi)	-	500	-
5.1 Table-1(Se+Te+Bi)	-	500	-
5.1 Table-1(Sb)	-	500	-
5.1 Table-1(As)	-	500	-
5.1 Table-1(Sn)	-	500	-
5.1 Table-1(Pb)	-	500	-
5.1 Table-1(Fe)	-	500	-
5.1 Table-1(Ni)	-	500	-
5.1 Table-1(S)	-	500	-
5.1 Table-1(Ag)	-	500	-
5.1 Table-1(O)	-	2500	-
5.1 Table-1(Maximum Allowable Total Impurities)	-	500	-
6.1(Dimension)	-	500	-
6.2.2(Ovality)	-	250	-
7.0(Freedom from Defects)	-	500	-
8.1(Tensile Strength)	-	2500	-
8.2(Surface Compression Test)	-	1500	-
Cl-9.1, Table-4(Volume Resistivity)	-	1500	-
Cl-9.1, Table-4(Mass Resistivity)	-	1500	-
Cl-9.1, Table-4(Electrical Conductivity)	-	1500	-
7.2(Surface Oxide)	-	2500	-
9.2.1.1(Electrical Properties)	-	1500	-
9.2.1.2(Electrical Properties)	-	1500	-
9.2.1.3(Electrical Properties)	-	1500	-
13(Mechanical Strength)	-	4000	-
8.2.2(Calculated resistance)	-	250	-
Cl-9.2.2(Electrical Properties)	-	1000	-

-
Included w.e.f. 01.04.2026 Exclusion: 10.5 (Microscopic Examination)

1236

Bombay Textiles Research Association (BTRA), Mumbai

7130206

IS 178 (2022)

Textiles ? Cotton Twill ? Specification (third revision)

Cotton Twill

13840 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-3.2(Manufacture-Cloth)	-	510	Type of weave
Cl-4.1, Table 1(Approximate Count of Yarn-Warp)	-	510	-
Cl-4.1, Table 1(Approximate Count of Yarn-Weft)	-	0	-
Cl-4.1, Table 1(Ends per, cm)	-	510	-
Cl-4.1, Table 1(Picks per, cm)	-	0	-
Cl-4.1, Table 1(Mass g/m2)	-	510	-
Cl-4.1, Table 1(Breaking Strength on 5 × 20 cm Strip, N (kgf),- Warp)	-	1010	-
Cl-4.1, Table 1(Breaking Strength on 5 × 20 cm Strip, N (kgf),- Weft)	-	0	-
Cl-4.1, Table 1(Length, m,)	-	510	-
Cl-4.1, Table 1(Width,)	-	510	-
Cl-4.2, Table 2 (i)(Colour fastness to light(Dyed and bleached fabrics only))	-	7000	-
Cl-4.2, Table 2 (ii)(Colour fastness to washing(Dyed fabrics only))	-	500	-
Cl-4.2, Table 2 (iii)(Scouring loss, percent, Max)	-	1010	-
Cl-4.2, Table 2 (iv)(pH value)	-	510	-
Cl-4.2, Table 2 (v)(Shrinkage or elongation-Warp)	-	750	-
Cl-4.2, Table 2 (v)(Shrinkage or elongation,- Weft)	-	0	-

-
Included w.e.f. 17.02.2026 Exclusion: "Cl-3.1 (Manufacture-Yarn) Cl-4.3 (Sealed Sample) Cl-5 (Marking)"

1237

Delhi Analytical Research Laboratory

8169106

IS 16098 Part 2 (2013)

Structured-Wall Plastics Piping Systems for Non-Pressure Drainage and Sewerage Part 2 Pipes and Fittings with Non-Smooth External Surface, Type B

ALL

77500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1.1 Table-10 (i)(Ring Stiffness)	-	2500	10 percent discount for bis
Table -1 Cl. No. 5.1, i)(Base Density)	-	100	10 percent discount for bis
Table -1 Cl. No. 5.1, ii)(Melt Flow Rate (MFR) at (190ºC, 5kg load))	-	1500	10 percent discount for bis
Table -1 Cl. No. 5.1, iii)(Thermal Stability (Oxidation Induction Test, OIT) at 200ºC)	-	2500	10 percent discount for bis
8.1.1 Table-10 (ii)(Impact Strength at (0±1 ºC))	-	2000	10 percent discount for bis
" 5.1 Table-2 ", i)(Resistance to Internal Pressure 165hrs)	-	1500	10 percent discount for bis
" 5.1 Table-2 ", ii)(Resistance to Internal Pressure 1000hrs)	-	6000	10 percent discount for bis
8.1.1, 8.1.2 Table-10 (iii)(Ring flexibility 30% of dem)	-	2500	10 percent discount for bis
6.3.1 & Table-5(Dim (min.) E4 (min) E5 (min.) Socket Length)	-	500	10 percent discount for bis
6.3.2(Length of Pipe)	-	500	10 percent discount for bis
8.1.1 Table-10 (iv)(Creep ratio)	-	16000	10 percent discount for bis
6.3.3(Out Side Diameter)	-	500	10 percent discount for bis
6.3.5.1.1(Ring Stiffness of Spigot + socket)	-	1500	10 percent discount for bis
"6.3.5.1.5 Table-5 "(Socket thickness Avg. (min.) Avg.)	-	500	10 percent discount for bis
9 Table-12 (i)(Tightness of elastomeric ring seal Joint)	-	3500	10 percent discount for bis
6.3.5.2(Wall Thickness(e4 min))	-	500	10 percent discount for bis
9 Table 12 (ii)(Water tightness)	-	3500	10 percent discount for bis
6.3.5.2("Construction Height of body wall(ec) Wall Thickness (emin) ")	-	200	10 percent discount for bis
9 Table- 12 (iii)(Resistance to combined temperature cycling and external loading)	-	1000	10 percent discount for bis
7.1(Appearance)	-	100	10 percent discount for bis
7.1.1(Color of Finished Pipes)	-	100	10 percent discount for bis
7.2 Table-6 (i)(Resistance to Heating oven test at (110±2ºC for 30 minute))	-	1000	10 percent discount for bis
8.1.1 Table-10 (i)(Ring Stiffness)	-	0	-
Table -1 Cl. No. 5.1, i)(Base Density)	-	0	-
Table -1 Cl. No. 5.1, ii)(Melt Flow Rate (MFR) at (190ºC, 5kg load))	-	0	-
Table -1 Cl. No. 5.1, iii)(Thermal Stability (Oxidation Induction Test, OIT) at 200ºC)	-	0	-
8.1.1 Table-10 (ii)(Impact Strength at (0±1 ºC))	-	0	-
" 5.1 Table-2 ", i)(Resistance to Internal Pressure 165hrs)	-	0	-
" 5.1 Table-2 ", ii)(Resistance to Internal Pressure 1000hrs)	-	0	-
8.1.1, 8.1.2 Table-10 (iii)(Ring flexibility 30% of dem)	-	0	-
6.3.1 & Table-5(Dim (min.) E4 (min) E5 (min.) Socket Length)	-	0	-
6.3.2(Length of Pipe)	-	0	-
8.1.1 Table-10 (iv)(Creep ratio)	-	0	-
6.3.3(Out Side Diameter)	-	0	-
6.3.5.1.1(Ring Stiffness of Spigot + socket)	-	0	-
"6.3.5.1.5 Table-5 "(Socket thickness Avg. (min.) Avg.)	-	0	-
9 Table-12 (i)(Tightness of elastomeric ring seal Joint)	-	0	-
6.3.5.2(Wall Thickness(e4 min))	-	0	-
9 Table 12 (ii)(Water tightness)	-	0	-
6.3.5.2("Construction Height of body wall(ec) Wall Thickness (emin) ")	-	0	-
9 Table- 12 (iii)(Resistance to combined temperature cycling and external loading)	-	0	-
7.1(Appearance)	-	0	-
7.1.1(Color of Finished Pipes)	-	0	-
7.2 Table-6 (i)(Resistance to Heating oven test at (110±2ºC for 30 minute))	-	0	-

-
included w.e.f 30.01.2026

1238

Aaditech Test and Calibration Lab LLP

8179926

IS 710 (2024)

MARINE PLYWOOD - SPECIFICATION (Third Revision)

All

13700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Timber)	-	0	-
Cl-4.2(Adhesive)	-	1500	-
Cl-5.1(Veneers)	-	1000	-
Cl-5.2.1(Glueing)	-	200	-
Cl -5.2.2(Thickness of Veneers)	-	300	-
Cl - 5.2.3.1(Joint in Veneers)	-	200	-
Cl - 5.2.3.2(Edge joints)	-	200	-
Cl - 5.2.3.3(End joints)	-	200	-
Cl - 5.2.3.4(Scarf joints)	-	200	-
Cl - 5.2.4(Grain Direction)	-	200	-
Cl-5.3(Treatment)	-	200	-
Cl-5.4(Moisture Content)	-	700	-
Cl-6.1(Dimensions (length))	-	300	-
Cl-6.2(Thickness)	-	300	-
Cl-6.3(Squareness)	-	300	-
Cl-7.1, 7.2, 7.3, 7.4, 7.5 & 7.6(Workmanship and finish)	-	300	-
Cl-9.3(Moisture Content)	-	700	-
Cl-9.4.2(Glue Adhesion in Dry State- Adhesion of Plies)	-	1000	-
Cl-9.4.1(Glue Adhesion in Dry State- Glue Shear Strength -Average)	-	1000	-
Cl-9.5.1.1(Glue Adhesion in Water Resistance - Glue Shear Strength -Average)	-	1000	-
Cl-9.5.1.2(Water Resistance Test-Adhesion of plies)	-	1000	-
Cl-9.5.2(Water Resistance Test)	-	1000	-
Cl-9.6(Tensile Strength-Along the grain)	-	1000	-
Cl-9.7(Mycological Test -Adhesion)	-	2000	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	1000	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	1000	-
Cl-9.9, Table-3 (i) a((Modulus of Elasticity: Across the Face Grain: Average) Wet Bending)	-	1000	-
Cl-9.9, Table-3 (i) b((Modulus of Elasticity: Across the Face Grain: Minimum Individual) Wet Bending)	-	1000	-
Cl-9.10(Retention of Preservative)	-	2000	-
Cl-9.11(Formaldehyde Content Test)	-	2000	-
Cl-9.12(Steady-State Formaldehyde Emission Test)	-	0	-
Cl-9.4.2(Adhesion of Plies)	-	1000	-
5.1.1(Defects in veneers)	-	300	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-	1000	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-	1000	-
Cl-9.9, Table-3 (ii) a((Modulus of Rupture: Across the Face Grain: Average) Wet Bending)	-	1000	-
Cl-9.9, Table-3 (ii) b((Modulus of Rupture: Across the Face Grain: Minimum Individual) Wet Bending)	-	1000	-
Cl-6.1(Dimensions (width))	-	300	-
Cl-8.3(Edge Straightness)	-	300	-
Cl-9.4.1(Glue Adhesion in Dry State- Glue Shear Strength –Minimum Individual)	-	1000	-
Cl-9.5.1.1(Glue Adhesion in Water Resistance - Glue Shear Strength –Minimum Individual)	-	1000	-
Cl-9.6(Tensile Strength-Across the grain)	-	1000	-
Cl-9.7(Glue Adhesion in Mycological test - Glue Shear Strength –Minimum Individual)	-	1000	-
Cl-9.7(Glue Adhesion in Mycological test - Glue Shear Strength -Average)	-	1000	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-	1000	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-	1000	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-	1000	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-	1000	-
Cl-11.1(Marking)	-	200	-
Cl-11.3(Marking)	-	200	-

-
Included w.e.f 17.02.2026 Exclusion: Cl-9.12 (Steady-State Formaldehyde Emission Test)

1239

CIPET, Lucknow

9102534

IS 16058 (2024)

Dunnage pallets made from recycled packaging wastes for warehousing application - Specification (First Revision)

31600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-8.1.1(Nails)	-	500	-
Cl-8.1.2(Threaded Nail)	-	500	-
Cl-8.1.3(Ring Nail)	-	500	-
Cl-8.1.4(Interrupted Thread Nail)	-	500	-
Cl-8.1.5(Collated Nail)	-	500	-
Cl-8.1.6(Screw)	-	500	-
Cl-8.2(Requirements for Fasteners)	-	500	-
Cl-11.1(Dimensions of Pallet Type “A-1”)	-	500	-
Cl-11.1.1(Dimensions of Top Plank of Pallet Type “A-1”)	-	500	-
Cl-11.2(Dimensions of Pallet Type “A-2”)	-	500	-
Cl-11.2.1(Dimensions of Top Plank of Pallet Type “A-2”)	-	500	-
Cl-11.3(Dimensions of Pallet Type “B”)	-	500	-
Cl-11.3.1(Dimensions of Top Plank of Pallet Type “B”)	-	500	-
Cl-11.3.2(Dimensions of Bottom Support Plank of Pallet Type “B”)	-	500	-
Cl-12(Workmanship)	-	500	-
Cl-13(Finish)	-	500	-
Cl-15.1(Stacking Test Using Static Load)	-	1100	-
Cl-15.2(Vertical Impact Drop Test)	-	1100	-
Cl-15.3(Corner Drop Test)	-	1100	-
Cl-15.4(Hammer Test)	-	1100	-
Cl-15.5(Load Bearing Test)	-	1100	-
Cl-16(Routine Tests)	-	0	-
Cl-17.1 (i)(Density (kg/m³))	-	700	-
Cl-17.2 (ii)(Tensile stress at proportional limits (kg/cm2))	-	1800	1300 + 500
Cl-17.2 (iv)(Modulus of elasticity in tension parallel to grain (kg/cm²))	-	1800	1300 + 500
Cl-17.2 (v)(F alling impact strength, minimum height of fall (cm))	-	1600	1100 +500
Cl-17.2 (vi)(Compression parallel to surface test (Min), (kg/cm²))	-	1600	1100+500
Cl-17.3 (i)(Moisture (percent, Max))	-	700	-
Cl-17.3 (ii)(Water absorption 2 h (percent, Max))	-	1100	600 + 500
Cl-17.3 (iii)(Water absorption 24 h (percent, Max))	-	1100	600+500
Cl-17.3 (iv)(Acidity and alkalinity resistance test)	-	1400	-
Cl-20(Marking)	-	500	-
14(Conditioning)	-	1100	-
Cl-17.2 (iii)(Tensile stress at maximum load (kg/cm2))	-	1800	1300 + 500

31 Dec, 2026

-
Included w.e.f. 29.01.2026

1240

Aaditech Test and Calibration Lab LLP

8179926

IS 303 (2024)

Plywood for General Purposes â Specification (Fourth Revision)

All

9500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Classification by appearance)	-	200	-
Cl-5.2, Table- 1 (i)(Blister)	-	200	-
Cl-5.2, Table- 1 (ii)(Checks)	-	200	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	200	-
Cl-5.2, Table- 1 (iv)(Dote)	-	200	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	200	-
Cl-5.2, Table- 1 (vi)(Joints)	-	200	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	200	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	200	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	200	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	200	-
Cl-5.2, Table- 1 (xi)(Patches)	-	200	-
Cl-5.2, Table- 1 (xii)(Splits)	-	200	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	200	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	200	-
Cl-6.1(Timber)	-	200	-
Cl-6.2(Adhesive)	-	1500	-
Cl-7.2.1(Thickness of veneers)	-	300	-
Cl-7.2.3(Grain Direction)	-	200	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	200	-
Cl-7.2.5.2(Splits)	-	200	-
Cl-7.2.5.3(Overlap)	-	200	-
Cl-8.1(Dimensions -length)	-	300	-
Cl-8.2(Thickness of the plywood boards)	-	300	-
Cl-8.3(Squareness)	-	300	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	750	-
Cl-11.3.2(Mycological Test)	-	2000	-
Cl-11.4(Moisture Content)	-	750	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	1000	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	1000	-
Cl-11.6(Formaldehyde Content Test)	-	2000	-
Cl-11.7(Steady-State Formaldehyde Emission Test)	-	2000	-
Cl-9(WORKMANSHIP AND FINISH)	-	300	-
Cl-7.2.4(Scarf Joints)	-	200	-
Cl. 4(Grades)	-	0	-
Cl.5.1(Type based on classification by appearance)	-	0	-
Cl.5.2(Quality Requirements of Plywood for General Purposes)	-	0	-
Cl.8.1(Dimensions -width)	-	300	-
Cl.8, 8.3 & Annex C(Edge Straightness)	-	300	-
Cl.8, 8.3 & Annex C(Edge Squareness)	-	300	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-	1000	-
Cl-11.5, Table-4,(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-	1000	-
Cl-8.3(Edge Straightness)	-	300	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-	1000	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-	1000	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-	1000	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-	1000	-
Cl-13(Marking)	-	200	-
Cl-5.1(Classification by appearance)	-	-	-
Cl-5.2, Table- 1 (i)(Blister)	-	-	-
Cl-5.2, Table- 1 (ii)(Checks)	-	-	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	-	-
Cl-5.2, Table- 1 (iv)(Dote)	-	-	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	-	-
Cl-5.2, Table- 1 (vi)(Joints)	-	-	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	-	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	-	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	-	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	-	-
Cl-5.2, Table- 1 (xi)(Patches)	-	-	-
Cl-5.2, Table- 1 (xii)(Splits)	-	-	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	-	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	-	-
Cl-6.1(Timber)	-	-	-
Cl-6.2(Adhesive)	-	-	-
Cl-7.2.1(Thickness of veneers)	-	-	-
Cl-7.2.3(Grain Direction)	-	-	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	-	-
Cl-7.2.5.2(Splits)	-	-	-
Cl-7.2.5.3(Overlap)	-	-	-
Cl-8.1(Dimensions -length)	-	-	-
Cl-8.2(Thickness of the plywood boards)	-	-	-
Cl-8.3(Squareness)	-	-	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	-	-
Cl-11.3.2(Mycological Test)	-	-	-
Cl-11.4(Moisture Content)	-	-	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	-	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	-	-
Cl-11.6(Formaldehyde Content Test)	-	-	-
Cl-11.7(Steady-State Formaldehyde Emission Test)	-	-	-
Cl-9(WORKMANSHIP AND FINISH)	-	-	-
Cl-7.2.4(Scarf Joints)	-	-	-
Cl. 4(Grades)	-	-	-
Cl.5.1(Type based on classification by appearance)	-	-	-
Cl.5.2(Quality Requirements of Plywood for General Purposes)	-	-	-
Cl.8.1(Dimensions -width)	-	-	-
Cl.8, 8.3 & Annex C(Edge Straightness)	-	-	-
Cl.8, 8.3 & Annex C(Edge Squareness)	-	-	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-	-	-
Cl-11.5, Table-4,(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-	-	-
Cl-8.3(Edge Straightness)	-	-	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-	-	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-	-	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-	-	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-	-	-
Cl-13(Marking)	-	-	-

-
Included w.e.f 17.02.2026 Exclusion: Cl-11.7 (Steady-State Formaldehyde Emission Test)

1241

MORBI TEST HOUSE LLP

7195306

IS 5509 (2021)

Fire Retardant Plywood - Specification ( Third Revision )

All Grade / Type / Size / Designation

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.3 (Table 1)(b) 6 mm and above)	-	3000	-
4.1(Flame retardant chemicals)	-	0	-
4.2(Flame retardant and preservative treatment)	-	0	-
4.3(Treatment)	-	0	-
5(PREPARATION FOR TREATMENT)	-	0	-
6.1.1(Treatment of Plywood by Pressure Impregnation after Manufacture)	-	0	-
6.1.2(Soaking Treatment)	-	0	-
6.2(Choice of Treatment)	-	0	-
7(CONDITIONING AFTER TREATMENT)	-	0	-
8.1(Dimensions)	-	1000	-
8.2(Thickness)	-	500	-
8.3, Taable-1 (i)(Tolerance- Length)	-	500	-
9(WORKMANSHIP AND FINISH)	-	500	-
10(SAMPLING AND CRITERIA FOR CONFORMITY)	-	0	-
11 (a)(For flammability)	-	0	-
11 (b)(For flame penetration)	-	0	-
11 (c)(For rate of burning)	-	0	-
12.1 Table - 2 (i)(Moisture content, percent, Max)	-	1000	-
12.1 Table - 2 (ii)(Flammability (see Note 1), minutes, Min)	-	2000	-
12.1 Table - 2 (iii)(Flame penetration (see Note 2), minutes, Min)	-	2000	-
12.1 Table - 2 (iv)(Rate of burning (see Note 3), minutes, Min)	-	2000	-
12.2(Other Tests)	-	5000	-
14(Marking)	-	0	-
Cl-8.3, Table-1 (ii)(Tolerances-Width)	-	500	-
Cl-8.3, Table-1 (iii)(Tolerances- Thickness)	-	500	-
Cl-8.3, Table-1 (iv)(Edge straightness)	-	500	-
Cl-8.3, Table-1 (v)(Squareness,)	-	500	-

-
Included w.e.f. 29.01.2026 Exclusion; Cl-13 (ADDITIONAL REQUIREMENTS FOR ECO-MARK)

1242

MORBI TEST HOUSE LLP

7195306

IS 4990 (2024)

PLYWOOD FOR CONCRETE SHUTTERING WORKS SPECIFICATION (Fourth Revision)

All Grade / Type / Size / Designation

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Timber)	-	100	-
Cl-5.2(Adhesives for Bonding of Veneers)	-	4000	-
Cl-6.1(Manufacture)	-	0	-
Cl-6.2(Manufacture ( Thickness of veneers))	-	0	-
Cl-6.3(Manufacture ( Physical and mechanical properties of veneers))	-	0	-
Cl-6.4, 6.7(Manufacture (Plywood for concrete shuttering))	-	0	-
Cl-6.5(Manufacture (Scarf joints))	-	0	-
Cl-6.6(Manufacture ( Preservative treatment))	-	0	-
Cl-7.1(Dimensions -length)	-	100	-
Cl-7.2(Thickness)	-	100	-
Cl-7.3(Squareness)	-	500	-
Cl-8.1, 8.2(Workmanship and finish)	-	200	-
Cl-10.3(Moisture Content)	-	500	-
Cl-10.4.1(Glue Adhesion in Dry State - Glue Shear Strength-WOOD FAILURE, Average)	-	1000	-
Cl-10.4.2(Glue Adhesion in Dry State - Adhesion of Plies)	-	1000	-
Cl-10.5, 10.5.1(Resistance to water test- glue shear strength- WOOD Failure, Average)	-	1500	-
Cl-10.5.1.1(Water Resistance Test-Glue shear strength)	-	1500	-
Cl-10.5.1.2(Water Resistance Test-Adhesion of plies)	-	1500	-
Cl-10.5.2(Water Resistance Test (Alternate method))	-	1500	-
Cl-10.6(Water resistance test (Concrete shuttering Plywood))	-	1500	-
Cl-10.7.1, Table-2(Mycological Test- Glue shear strengt)	-	1500	-
Cl-10.7.2(Mycological Test- Adhesion of plies)	-	1500	-
Cl-10.8(Tensile Strength)	-	1000	-
Cl-10.9, Table-3 (i)(Along (parallel to the grain direction of the face veneer))	-	1000	-
Cl-10.9, Table-3 (ii)(Across (perpendicular to the grain direction of the face veneer))	-	1000	-
Cl-10.10, Table-4 (i) a((Modulus of Elasticity: Across the Face Grain: Average) Wet Bending)	-	1500	-
Cl-10.10, Table-4 (i) b((Modulus of Rupture: Across the Face Grain: Minimum Individual) Wet Bending)	-	1500	-
Cl-10.11(Retention of Preservative)	-	1500	-
Cl-10.12(Formaldehyde Content Test)	-	2000	-
Cl-10.10, Table-4 (ii) a(Wet Bending Strength:- Modulus of Rupture: Across the Face Grain: Average))	-	1500	-
Cl-10.10, Table-4, (ii) b(Wet Bending Strength; (Modulus of Rupture: Along the Face Grain: Minimum Individual))	-	1500	-
Cl-10.4.1, 10.5.1.1 and 10.7.1, Table-2(Average Wood Failure)	-	1500	-
Cl-10.4.1, 10.5.1.1 and 10.7.1, Table-2(Average Failure Load, N -Dry State)	-	1500	-
Cl-10.4.1, 10.5.1.1 and 10.7.1, Table-2(Average Failure Load, N- Resistance to Water)	-	1500	-
Cl-10.4.1, 10.5.1.1 and 10.7.1, Table-2(Average Failure Load, N - Resistance to Micro-Organisms)	-	1500	-
Cl-10.8 (a)(Tensile strength)	-	1000	-
Cl-10.8 (b)(Tensile strength)	-	1000	-
Cl-10.8 (c)(Tensile strengths in both directions)	-	1000	-
Cl-7.1(Dimensions (width))	-	100	-
Cl-7.3(Edge Straightness)	-	500	-

-
Included w.e.f. 22.01.2026 Exclusion: Cl-10.13 (Steady-State Formaldehyde Emission Test)

1243

BIS, Eastern Regional Laboratory (ERL)

None

IS 14407 (2023)

Aluminium cans for beverages -- Specification (first revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
9 (Marking)	-
5.1-1A&B-1 (Copper)	-
5.1-1A&B-2 (Magnesium)	-
5.1-1A&B-3 (Silicon)	-
5.1-1A&B-5 (Manganese)	-
5.1-1A&B-4 (Iron)	-
5.1-1A&B-6 (Zinc)	-
5.1-1A&B-7 (Titanium)	-
5.1-1A&B-8 (Chromium)	-
5.1-1A&B-10 (Vanadium)	-

-
Mech: Except Enamel rater criteria (7.1.2), Buckle Strength/ Dome reversal (7.1.3), Air pressure test (7.1.4) and Testing of ends (7.2)

1244

BIS, Eastern Regional Laboratory (ERL)

None

IS 18285 (2023)

Aluminium cans for packaged natural mineral water and packaged drinking water -- Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-9 (Marking)	-
Cl-5.1, Table-1A, 1B (Cu)	-
Cl-5.1, Table-1A, 1B (Mg)	-
Cl-5.1, Table-1A, 1B (Si)	-
Cl-5.1, Table-1A, 1B (Mn)	-
Cl-5.1, Table-1A, 1B (Fe)	-
Cl-5.1, Table-1A, 1B (Zn)	-
Cl-5.1, Table-1A, 1B (Ti)	-
Cl-5.1, Table-1A, 1B (Cr)	-
Cl-5.1, Table-1A, 1B (V)	-

-
Mech: Except Enamel rater Criteria (7.1.2), Air Pressure test (7.1.3) and Testing of Ends (7.2)

1245

BIS, Eastern Regional Laboratory (ERL)

None

IS 15961 (2025)

Hot Dip Aluminium-Zinc Alloy Metallic Coated Steel Strip and Sheet - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-3.5 (Surface Finish)	-
Cl-7 (C)	-
Cl-7 (Mn)	-
Cl-7 (S)	-
Cl-7 (P)	-
Cl-7 (Total aluminium)	-
Cl-7 (silicon)	-
Cl-7 (Nitrogen)	-
Cl-7 (Chromium,)	-
Cl-7 (Nickel,)	-
Cl-7 (Niobium,)	-
Cl-7 (Vanadium,)	-
Cl-7 (Titanium,)	-
Cl-7 (Molybdenum,)	-
Cl-7 (Boron,)	-
Cl-7 (Calcium)	-
Cl.6 Table 3 of IS 513(part 2) :2016 (micro alloy)	-

-
-

1246

BIS, Eastern Regional Laboratory (ERL)

None

IS 736 (1986)

Specification for wrought aluminium and aluminium alloy plate for general engineering purposes (Third Revision)

For all grades

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (Freedom from defect)	-
5.1, Table 1 (Aluminium)	-
5.1, Table 1 (Copper)	-
5.1, Table 1 (Magnesium)	-
5.1, Table 1 (Iron)	-
5.1, Table 1 (Silicon)	-
5.1, Table 1 (Mangnese)	-
5.1, Table 1 (Zinc)	-
5.1, Table 1 (Titanium and /or other grain refining element)	-
5.1, Table 1 (Chromium)	-
Cl. 5.1 Table 1, (Chromium + Manganese)	-
Cl. 5.1 Table 1, (Copper + Silicon + Iron + Manganese)	-
4 (Freedom from defect)	-
6.1 table 2 (0.2% proof strength)	-
6.1 table 2 (tensile strength)	-
6.1 table 2 (Elongation)	-
8 (Dimensions & Tolerances)	-

-
Mech: Complete

1247

BIS, Eastern Regional Laboratory (ERL)

None

IS 4712 (1984)

Specification for forged steel, socket - Welding fittings (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (General requirements)	-
Cl. 4.1 Sl No. i) (Carbon)	-
Cl. 4.1 Sl No. ii) (Manganese)	-
Cl. 4.1 Sl No. iii) (Phosphorus)	-
Cl. 4.1 Sl No. iv) (Sulphur)	-
Cl. 4.1 Sl No. v) (Silicon)	-
5.1 (Concentricity of bores)	-
5.2 (Coincidence of axes)	-
5.3 (Dimension of fitting)	-
7.1 (Size and thickness)	-
6.1 (Tensile & hardness test)	-
4.2 (Mechanical requirements)	-

-
Mech: Except Hydraulic test

1248

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 5187 (1972)

Specification for flush bolts (First Revision)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 2.1 Table 1(i)(Body and plate)	-	20000	For complete testing
Clause 2.1 Table 1(ii)(Bolt)	-	20000	For complete testing
Clause 2.1 Table 1(iii)(Spring)	-	20000	For complete testing
Clause 3(Types, sizes and shape)	-	20000	For complete testing
Clause 5.1(Dimension)	-	20000	For complete testing
Clause 5.2(Tolerance)	-	20000	For complete testing
Clause 6(Workmanship and finish)	-	20000	For complete testing
Clause 7(Marking)	-	20000	For complete testing
Clause 8(Packing)	-	20000	For complete testing
Clause 2.1 Table 1(i)(Body and plate)	-	-	-
Clause 2.1 Table 1(ii)(Bolt)	-	-	-
Clause 2.1 Table 1(iii)(Spring)	-	-	-
Clause 3(Types, sizes and shape)	-	-	-
Clause 5.1(Dimension)	-	-	-
Clause 5.2(Tolerance)	-	-	-
Clause 6(Workmanship and finish)	-	-	-
Clause 7(Marking)	-	-	-
Clause 8(Packing)	-	-	-

-
Included w.e.f. 29.01.2026

1249

LPG Equipment Research Centre (LERC), Bengaluru

6141034

IS 14899 (2014)

Liquefied petroleum gas (LPG) containers for automotive use - Specification (First Revision)

Auto LPG Cylinders

25500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12.1,12,2,12,3(Marking)	-	1000	-
10.1.5(Inner surface in tension)	-	2000	-
10.1.5(Outer surface in tension)	-	2000	-
10.1.6(Macroscopic Examination On Circumferential Weld )	-	0	-
10.1.6.1(Macroscopic Examination, m1,Through valve boss )	-	0	-
10.1.6.1(Macroscopic Examination, m2,Through valve plate welds)	-	0	-
10.1.8(Water Capacity)	-	1500	-
10.2.1(Hydrostatic stretch test)	-	0	-
10.2.2(Burst test)	-	3500	-
10.2.3.2(Change in volume,)	-	500	-
10.2.3.3(shall not cause any fragmentation )	-	500	-
10.3(Hydrostatic Test,3 MPa for 60 seconds )	-	1500	-
10.4(Pneumatic Leakage Test,2 MPa for 1 minute)	-	1500	-
10.6.1(Bonfire Test )	-	2000	-
10.6.2(Fatigue Test)	-	3000	-
10.6.3(Crash Test)	-	2500	-
10.6.4(Strength Assessment)	-	2000	-
11(Surface coating and colour)	-	2000	-
12.1,12,2,12,3(Marking)	-	0	-
10.1(Inner surface in tension)	-	0	-
10.1(Outer surface in tension)	-	0	-
10.1(Macroscopic Examination)	-	0	-
10.1(On Circumferential Weld )	-	0	-
10.1(On longitudinal Weld)	-	0	-
10.1(m1,Through valve boss )	-	0	-
10.1(m2,Through valve plate welds)	-	0	-
10.1.7(Water Capacity)	-	0	-
10.2(Hydrostatic stretch test)	-	0	-
10.2(Burst test)	-	0	-
10.3(Hydrostatic Test,3 MPa for 60 seconds )	-	0	-
10.4(Pneumatic Leakage Test,2 MPa for 1 minute)	-	0	-
10.6(Type tests)	-	0	-
10.6(Type tests)	-	0	-
10.6(Type tests)	-	0	-
10.6(Type tests)	-	0	-
11(Surface coating and colour)	-	0	-
10.1.6(Macroscopic Examination On longitudinal Weld)	-	0	-

-
Included w.e.f 09.02.2026 10.5 (Non-destructive Examination)

1250

Standard Testing and Research Lab

9197206

IS 2191 : Part 2 (2022)

WOODEN FLUSH DOOR SHUTTERS (CELLULAR, HOLLOW AND TUBULAR CORE TYPE) - SPECIFICATION PART 2 PARTICLE BOARD, HIGH DENSITY FIBRE BOARD, MEDIUM DENSITY FIBRE BOARD AND FIBRE HARDBOARD FACE PANELS (Fourth Revision)

All Grade

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5(Sizes and Tolerances)	-	18000	-
Cl-6.1.(Timber)	-	18000	-
Cl-6.2(Laminated veneer lumber (LVL), veneer laminated lumber (VLL), medium density fibre board (MDF), high density fibre board (HDF))	-	18000	-
Cl-6.3.1(Particle board)	-	18000	-
Cl-6.3.2(MDF board and HDF board)	-	18000	-
Cl-6.3.5(shutters with fibre hardboard face)	-	18000	-
Cl-8.1(Locks)	-	18000	-
Cl-10.1(various test)	-	18000	-
Cl-10.2(End Immersion Test)	-	18000	-
Cl-10.3(Glue Adhesion Test)	-	18000	-
Cl-13(Marking)	-	18000	-

24 Feb, 2029

-
-

1251

Atckon Laboratories LLP, Bahadurgarh

8186436

IS 1110 (2023)

FERROSILICON -- SPECIFICATIONS

ALL

14700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(Constitution of Consignment)	-	200	-
Clauses 4 and 7.2.1-Table 1(Silicon)	-	13000	-
Clauses 4 and 7.2.1-Table 1(Carbon)	-	13000	-
Clauses 4 and 7.2.1-Table 1(Sulphur)	-	13000	-
Clauses 4 and 7.2.1-Table 1(Phosphorus)	-	13000	-
Clauses 4 and 7.2.1-Table 1(Aluminium)	-	13000	-
Clauses 4 and 7.2.1-Table 1(Calcium)	-	13000	-
Clauses 4 and 7.2.1-Table 1(Manganese)	-	13000	-
Clauses 4 and 7.2.1-Table 1(Manganese)	-	13000	-
Clauses 4 and 7.2.1-Table 1(Manganese)	-	13000	-
Clauses 4 and 7.2.1-Table 1(Boron)	-	13000	-
Clauses 4 and 7.2.1-Table 1(Zirconium)	-	13000	-
Clauses 4 and 7.2.1-Table 1(Titanium)	-	13000	-
8(SIZE)	-	1000	-
9(Extraneous contamination)	-	500	-

-
included w.e.f 30.01.2026

1252

MORBI TEST HOUSE LLP

7195306

IS 1328 (2025)

Veneered Decorative Plywood - Specification ( Fourth Revision )

All Grade / Type / Size / Designation

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4.1(Grades)	-	100	-
Cl 4.2(Type)	-	100	-
Cl 4.3(Formaldehyde Class)	-	2000	-
Cl 5.2(Adhesive)	-	4000	-
Cl 7.1(Surface Requirements- For Type 1)	-	500	-
Cl 7.2(Surface Requirements- For Type 2)	-	500	-
Cl 7.3(Surface Requirements- For Type 3)	-	500	-
Cl 7.4(Surface Requirements- For Type 4)	-	500	-
Cl 8.1(Dimensions (Length and Width))	-	1000	-
Cl 8.2(Dimensions (Thickness))	-	500	-
Cl 8.3(Squareness and Edge Straightness as Per Annex B)	-	1000	-
Cl 8.4- Table 1(Tolerances)	-	100	-
Cl 11.3(Moisture Content)	-	1000	-
Cl 11.4.1(a)(Water Resistance Test( For MR Grade))	-	2000	-
Cl 11.4.1(b)(Water Resistance Test( For BWR Grade))	-	2000	-
Cl 11.4.1(c)(Water Resistance Test( For BWP Grade))	-	2000	-
Cl 11.5(Formaldehyde Content Test)	-	2000	-
Cl 12(Marking)	-	0	-

-
Included w.e.f. 29.01.2026 Exclusion: Cl 11.6 (Steady - State Formaldehyde Emission Test ( Optional Test))

1253

National Test House (NER) - NTH, Guwahati

5169204

IS 14255 (1995)

Aertal bunched cables - For working voltages up to and including 1100 Volts - Specification

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Phase/Street Lighting conductor)	-	0	-
4.2(Messenger (Neutral Conductor or Otherwise))	-	0	-
5.1(Insulation)	-	0	-
6.1(Flexibility class)	-	0	-
6.2(Compactness)	-	0	-
6.2(No of strands)	-	0	-
6.2(Surface)	-	0	-
6.3(Protective barrier)	-	0	-
6.4(size of street lighting conductor)	-	0	-
6.5(Size of messenger conductor )	-	0	-
6.6(Joints in messenger conductor )	-	0	-
6.6(Direction of outer layer)	-	0	-
7.1(Insulation)	-	0	-
7.2( Thickness of insulation)	-	250	-
7.3(Tolerance on thickness of insulation )	-	250	-
7.4(Aplication of the insulation )	-	0	-
7.5(Colour of the insulation )	-	0	-
8.1(Core identification)	-	0	-
8.2(Core identification)	-	0	-
8.3(Identification by other means)	-	0	-
9.1(Assembly (Laying up))	-	0	-
9.2(Assembly (Laying up))	-	0	-
9.3(Direction of lay)	-	0	-
10.1 a) i)(Tests on phase/street light conductor: tensile test - Test method IS10810:Part 2)	-	1000	-
10.1 a) ii)(Wrapping test - 10810: Part 3)	-	500	-
10.1 a) iii)(Resistance test - IS10810: Part 5)	-	2000	-
10.1 b) i)(Test on messenger conductor: Breaking load - IS 10810: Part 2)	-	1000	-
10.1 b) ii)(Test on messenger conductor: Elongation test - Cl 11.3)	-	1000	-
10.1 b) iii)(Test on messenger conductor: Resistance test - IS 10810: Part 5)	-	2000	-
10.1 c) i)(Physical tests for XLPE Insulation: Tensile strength - IS 10810: Part 7)	-	1000	-
10.1 c) i)(Physical tests for XLPE Insulation: elongation at break - IS 10810: part 7)	-	1000	-
10.1 c) ii)(Ageing in air oven : Tensile strength variation - IS 10810:Part 11)	-	1000	-
10.1 c) ii)(Ageing in air oven : Elongation variation- IS 10810: Part 11)	-	1000	-
10.1 c) iii)(Hot set test: Elongation under load - IS 10810: Part 30)	-	1000	-
10.1 c) iii)(Hot set test: Permanent elongation (set) after cooling - IS 10810: Part 30)	-	1000	-
10.1 c) iv)(Shrinkage test : Shrinkage - 10810:Part 12)	-	1000	-
10.1 c) iv)(Shrinkage test : Crack Observed - 10810:Part 12)	-	0	-
10.1 c) v)(Water ahsorption (Gravimetric) - IS 10810: Part 33 )	-	1000	-
10.1 d) i)(Physical test for PE insulation: Tensile strength - IS 10810: Part 7 )	-	1000	-
10.1 d) i)(Physical test for PE insulation: elongation at break - IS 10810: Part 7)	-	1000	-
10.1 d) iv)(Vicat softening point -IS 10810: Part 22)	-	1000	-
10.1 d) ii)(Melt flow index- IS 10810: Part 23)	-	1000	-
10.1 d) v)(Environmental stress cracking -IS 10810:Part29)	-	2000	-
10.1 f)(Insulation resistance (Volume resistivity) test a) volume resistivity at 27°C - IS 10810: Part 43)	-	750	-
10.1 f)(Insulation resistance (Volume resistivity) test b) volume resistivity at 70°C - IS 10810: Part 43)	-	750	-
10.1 g)(High voltage test - IS10810:Part 45)	-	1500	-
6.1(Construction of phase conductor)	-	0	-
6.1(Number of wires (phase conductor))	-	0	-
6.1(Construction of Street Lighting conductor)	-	0	-
6.1(Number of wires (Street Lighting conductor))	-	0	-
12.1(Manufacturer's Identification)	-	0	-
12.2(Cable Identification)	-	0	-

13 Dec, 2027

-
1 10.1 d) iii) (Carbon Black Content) CARBON BLACK TEST METHOD IS UNDER CONSIDERATION 2 11.4 (Bending Test on the Completed Cable ( Optional)) BENDING TEST OPTIONAL TEST 3 11.4 (Bending Test on the Completed Cable ( Optional) ) BENDING TEST OPTIONAL TEST

1254

BIS, Northern Regional Laboratory (NRL)

None

IS 1239 : Part 1 (2004)

Steel Tubes, Tubulars and Other Wrought Steel Fittings : Part 1 Steel Tubes (BI-LINGUAL)

9200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.2 AND AS PER IS 513 (SULPHUR)	-
Cl. 14.1 (Tensile Strength)	-
Clause 14.1.1 (Elongation Percent)	-
Cl. 14.2 (Bend Test (uto and including 50 mm NB))	-
Cl. 14.3 (Flattening test (Over 50 mm NB))	-
Cl. 8 Table 3,4 & 5 (Outside Diameter)	-
Cl. 8, 9 Table 3,4 & 5 (Thickness)	-
Cl. 15 (Workmanship)	-
cl.17 (MARKING)	-

-
-

1255

Delhi Analytical Research Laboratory

8169106

IS 16098 Part 1 (2013)

Structured-Wall Plastics Piping Systems for Non-Pressure Drainage and Sewerage Part 1 Pipes and Fittings With Smooth External Surface, Type A

ALL

77500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.3.1(Dimension of Pipes and Fittings Diameter of pipe)	-	500	77500 Testing Charges For BIS and 1.0 Times of BIS Charges Extra for Others
6.3.2(Dimension of Pipes and Fittings Lengths of Pipe)	-	0	-
7.0(Physical characteristics for pipes and fittings Appearance)	-	0	-
7.1.1(Physical characteristics for pipes and fittings Colour of Finished Pipes)	-	0	-
7.2(Physical characteristics for pipes and fittings )	-	0	-
7.3(Physical characteristics for pipes and fittings )	-	0	-
8.1.1(Mechanical Characteristics of Pipes General)	-	0	-
8.1.1(Mechanical Characteristics of Pipes General)	-	0	-
8.1.2 (a)(Mechanical Characteristics of Pipes Ring Flexibility)	-	0	-
8.1.2 (b)(Mechanical Characteristics of Pipes Ring Flexibility)	-	0	-
8.1.2 (c)(Mechanical Characteristics of Pipes Ring Flexibility)	-	0	-
8.1.2 (e)(Mechanical Characteristics of Pipes Ring Flexibility)	-	0	-
8.2.1(Mechanical Characteristics of Fittings General)	-	0	-
8.2.1(Mechanical Characteristics of Fittings General)	-	0	-
8.2.2(Mechanical Characteristics of Fittings)	-	0	-
8.3(Joints)	-	0	-
9 (Table 12)(Performance Requirements)	-	0	-
9 (Table 12)(Performance Requirements)	-	0	-
11.1(Marking General)	-	0	-
11.2.1(Minimum Required Marking Pipes)	-	0	-
11.2.1(Minimum Required Marking Pipes)	-	0	-
11.2.1(Minimum Required Marking Pipes)	-	0	-
11.2.1(Minimum Required Marking Pipes)	-	0	-
11.2.1(Minimum Required Marking Pipes)	-	0	-
11.2.2(Minimum Required Marking Fittings)	-	0	-
11.2.2(Minimum Required Marking Fittings)	-	0	-
11.2.2(Minimum Required Marking Fittings)	-	0	-
11.2.2(Minimum Required Marking Fittings)	-	0	-
11.2.2(Minimum Required Marking Fittings)	-	0	-
11.2.2(Minimum Required Marking Fittings)	-	0	-
5.0(Composition of the material)	-	0	-
5.1(Composition of the material)	-	0	-
5.2 Table 1(Composition of the material- Resistance to internal hydrostatic Pipe material (1) 1 000 IS 12235 No seepage, cracking, pressure at 60ºC)	-	0	-
5.3(Composition of the material)	-	0	-
5.4(Composition of the material)	-	0	-
6.0(DESIGNATION OF WALL CONSTRUCTIONS AND EXAMPLES OF TYPICAL JOINTING METHODS )	-	0	-
6.1(Wall Construction Designated as Type A)	-	0	-
6.2(Deswignation)	-	0	-
6.3(Dimensions of pipes and fittings)	-	0	-
6.3.1 Table 2(Mean outside diameter)	-	0	-
6.3.2 Table 3(Wall thickness)	-	0	-
6.3.3 Fig 2(Length of pipe)	-	0	-
6.3.4,Table 4,5(Dimensions of Integral sckets and spigot ends)	-	0	-
6.3.4.1(Wall thickness of sockets)	-	0	-
6.3.4.2(Fabricated fittings)	-	0	-
6.3.4.3(Rotational moulded fittings)	-	0	-
6.3.4.4(Type of fittings)	-	0	-
7.0(Physical characteristics of pipes)	-	0	-
7.1(Appearance)	-	0	-
7.2(Colour )	-	0	-
7.3(Vicat softening temperature of pipes)	-	0	-
7.4(Resistance to Dichloromethane)	-	0	-
7.5(longitudinal reversion)	-	0	-
6.3.3(Dimension of Pipes and Fittings Diameters of Pipes and Spigots of Pipes orFittings)	-	0	-
8.1.2 (d)(Mechanical Characteristics of Pipes Ring Flexibility)	-	0	-
9 (Table 12)(Performance Requirements)	-	0	-
8.0(Physical characteristics of fittings)	-	0	-
8.1(Appearance and colour)	-	0	-
8.2(Vicat softening temperature of fittings)	-	0	-
8.3(Effect of Heating (Stress Relief Test))	-	0	-
9.0(Mechanical characteristics ofpipes)	-	0	-
9.1(Ring stiffness)	-	0	-
9.2(Resistance to external blows at o C)	-	0	-
9.4(Creep ratio)	-	0	-
10.0(Mechanical Characteristics of fittings)	-	0	-
10.1(Impact Strength of Injection Moulded and Fabricated Fittings)	-	0	-
9.3(Ring flexibility)	-	0	-
11.0(Joints)	-	0	-
11.1(Elastomeric Sealing Rings)	-	0	-
11.2(Solvent cement)	-	0	-
12.0(PERFORMANCE REQUIREMENTS)	-	0	-
12.1(Elastomeric Sealing Ring Joints)	-	0	-
12.1.1(Tightness of Elastomeric Sealing Ring Joints (Water pressure))	-	0	-
12.1.2(Tightness of Elastomeric Sealing Ring Joints (Internal Vaccum ))	-	0	-
12.1.3(Resistance to Combined Temperature Cycling and External Loading)	-	0	-
12.2(Solvent cement joints)	-	0	-
12.2.1(Tightness of Solvent cemented Ring Joints )	-	0	-
12.2.2(Tightness of Solvent cemented Ring Joints (Vaccum pressure))	-	0	-
6.3.1(Dimension of Pipes and Fittings Diameter of pipe)	-	0	-
6.3.2(Dimension of Pipes and Fittings Lengths of Pipe)	-	0	-
6.3.3(Dimension of Pipes and Fittings Diameters of Pipes and Spigots of Pipes orFittings)	-	0	-
7.0(Physical characteristics for pipes and fittings Appearance)	-	0	-
7.1.1(Physical characteristics for pipes and fittings Colour of Finished Pipes)	-	0	-
7.2(Physical characteristics for pipes and fittings )	-	0	-
7.3(Physical characteristics for pipes and fittings )	-	0	-
8.1.1(Mechanical Characteristics of Pipes General)	-	0	-
8.1.1(Mechanical Characteristics of Pipes General)	-	0	-
8.1.2 (a)(Mechanical Characteristics of Pipes Ring Flexibility)	-	0	-
8.1.2 (b)(Mechanical Characteristics of Pipes Ring Flexibility)	-	0	-
8.1.2 (c)(Mechanical Characteristics of Pipes Ring Flexibility)	-	0	-
8.1.2 (d)(Mechanical Characteristics of Pipes Ring Flexibility)	-	0	-
8.1.2 (e)(Mechanical Characteristics of Pipes Ring Flexibility)	-	0	-
8.2.1(Mechanical Characteristics of Fittings General)	-	0	-
8.2.1(Mechanical Characteristics of Fittings General)	-	0	-
8.2.2(Mechanical Characteristics of Fittings)	-	0	-
8.3(Joints)	-	0	-
9 (Table 12)(Performance Requirements)	-	0	-
9 (Table 12)(Performance Requirements)	-	0	-
9 (Table 12)(Performance Requirements)	-	0	-
11.1(Marking General)	-	0	-
11.2.1(Minimum Required Marking Pipes)	-	0	-
11.2.1(Minimum Required Marking Pipes)	-	0	-
11.2.1(Minimum Required Marking Pipes)	-	0	-
11.2.1(Minimum Required Marking Pipes)	-	0	-
11.2.1(Minimum Required Marking Pipes)	-	0	-
11.2.2(Minimum Required Marking Fittings)	-	0	-
11.2.2(Minimum Required Marking Fittings)	-	0	-
11.2.2(Minimum Required Marking Fittings)	-	0	-
11.2.2(Minimum Required Marking Fittings)	-	0	-
11.2.2(Minimum Required Marking Fittings)	-	0	-
11.2.2(Minimum Required Marking Fittings)	-	0	-
6.3.4 Table 4 & 5(Dimensions of Integral Socket and spigot ends)	-	0	-
6.3.4 Table 4 & 5(Outside diameter (dsm) min)	-	0	-
7.1.1(Colour of finished pipes)	-	0	-
12.1.1(Tightness of Elastomeric Sealing Ring Joints (Water Pressure))	-	0	-
12.1.2(Tightness of Elastomeric Sealing Ring Joints (Internal Vacuum))	-	0	-
6.3.4 Table 4 & 5(C max)	-	0	-
12.1.3(Resistance to Combined Temperature Cycling and External Loading)	-	0	-
12.1.3(Resistance to Combined Temperature Cycling and External Loading)	-	0	-
12.1.3(Resistance to Combined Temperature Cycling and External Loading)	-	0	-
12.1.3(Resistance to Combined Temperature Cycling and External Loading)	-	0	-
12.1.3(Resistance to Combined Temperature Cycling and External Loading)	-	0	-
7.6(7.6 Effect on Water)	-	0	-
8.4(Effect on Water)	-	0	-

-
included w.e.f 30.01.2026

1256

JBS TESTING SOLUTIONS (Unit-2) (24), Jalandhar

9172306

IS 4996 (1984)

Specification for reinforced concrete fence posts (First Revision)

39950 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1(MANUFACTURE-Construction and Finish )	-	39950	For complete testing
4.1.2(MANUFACTURE-Construction and Finish )	-	39950	For complete testing
4.2.1(MANUFACTURE-Reinforcement-Preparation)	-	39950	For complete testing
4.2.1(MANUFACTURE-Reinforcement-Preparation)	-	39950	For complete testing
4.2.2(MANUFACTURE-Reinforcement-Positioning)	-	39950	For complete testing
4.2.2(MANUFACTURE-Reinforcement-Positioning)	-	39950	For complete testing
4.2.2(MANUFACTURE-Reinforcement-Positioning)	-	39950	For complete testing
4.2.3(MANUFACTURE-Reinforcement-Anchorage)	-	39950	For complete testing
4.2.4(MANUFACTURE-Reinforcement-Cover)	-	39950	For complete testing
4.2.4(MANUFACTURE-Reinforcement-Cover)	-	39950	For complete testing
4.2.4(MANUFACTURE-Reinforcement-Cover)	-	39950	For complete testing
4.2.4.1(MANUFACTURE-Reinforcement-Cover)	-	39950	For complete testing
5(SHAPE AND DIMENSIONS)	-	39950	For complete testing
7.1(STRENGTH OF REINFORCED CONCRETE FENCE POSTS-Impact Test)	-	39950	For complete testing
7.2(STRENGTH OF REINFORCED CONCRETE FENCE POSTS-Static Load Test)	-	39950	For complete testing

22 May, 2026

-
Included w.e.f 22.01.2026

1257

National Test House (NER) - NTH, Guwahati

5169204

IS 1554 : Part 1 (1988)

Specification for pvc insulated (Heavy Duty) electric cables: Part 1 for working voltages up to and including 1100 v (Third Revision)

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(MATERIALS : CONDUCTOR)	-	0	-
4.1.1(INSULATION : General Purjose Insulaiion)	-	0	-
4.1.2(INSULATION : Heat Resisting Insulation)	-	0	-
5.1(MATERIALS : FILLER AND INNER SHEATH)	-	0	-
5.2(MATERIALS : FILLER AND INNER SHEATH)	-	0	-
6.1(MATERIALS : ARMGURING)	-	0	-
6.2(MATERIALS : ARMGURING)	-	0	-
7.1.1(OUTER SHEATH : For Cables with General Purpose InsuIafion)	-	0	-
7.1.2(OUTER SHEATH : For Cables with Heat Resisting InsuIalion)	-	0	-
8.1(CONSTRUCTION : CONDUCTOR)	-	0	-
8.2(CONSTRUCTION : CONDUCTOR)	-	0	-
9.1(INSULATION )	-	0	-
9.2(INSULATION : Thickness of Insulation)	-	250	-
9.3(INSULATION :Tolerance on Thickness of Insulation)	-	250	-
9.4(INSULATION : Application of Insulation)	-	0	-
10.1(CORE IDENTIFICATION)	-	0	-
10.2(CORE IDENTIFICATION)	-	0	-
10.3(CORE IDENTIFICATION)	-	0	-
10.3.1(Arrangement of Marking)	-	0	-
11.1(LAYING UP OF CORES)	-	0	-
11.2(LAYING UP OF CORES)	-	0	-
12.1(INNER SHEATH)	-	0	-
12.2(INNER SHEATH)	-	0	-
12.3(INNER SHEATH :Thickness of Inner Sheath)	-	250	-
12.3.1(INNER SHEATH :Thickness of Inner Sheath)	-	250	-
13.1.1(ARMOURING : Application)	-	0	-
13.1.2(Armouring: Coverage )	-	0	-
13.1.3(ARMOURING : Direction of lay )	-	0	-
13.1.4(ARMOURING : Application)	-	0	-
13.2(ARMOURING : Type of Armour)	-	0	-
13.2.1(ARMOURING : Type of Armour)	-	0	-
13.3(Armouring : Dimensions -Wire Diameter)	-	250	-
13.3(Armouring : Dimensions -Formed wire )	-	250	-
13.4(ARMOURING : Joints)	-	0	-
13.5.1(ARMOURING : Resistance)	-	2000	-
13.5.2(ARMOURING : Resistance)	-	2000	-
13.6 a)(ARMOURING: Tensile Strength)	-	1000	-
13.6 b)(ARMOURING: Elongation )	-	0	-
13.6 c)(ARMOURING: Torsion Test (For round wire ) )	-	1000	-
13.6 d)(ARMOURING: Winding Test(For formed wire))	-	500	-
13.6 e)(ARMOURING: Uniformity of zinc coating)	-	1000	-
13.6 f)(ARMOURING: Mass of zinc coating )	-	1000	-
13.6 g)(ARMOURING: Resistivity)	-	2000	-
14.1(OUTER SHEATH)	-	0	-
14.2(OUTER SHEATH)	-	0	-
14.3(OUTER SHEATH : Colour )	-	0	-
14.4.1(Thickness of Outer Sheath : Unarmowed Cables)	-	250	-
14.4.2(Thickness of Outer Sheath : Armoured Cables)	-	250	-
15.1 a) 1)(Tests on conductor : Annealing test ( for copper ))	-	1000	-
15.1 a) 2)(Tensile test (for aluminium) - Before stranding )	-	1000	-
15.1 a) 2)(Tensile test (for aluminium) - After stranding )	-	1000	-
15.1 a) 3)(Tests on conductor : Wrapping test ( for aluminium ))	-	500	-
15.1 a) 4)(Tests on conductor : Conductor resistance test)	-	1000	-
15.1 a) 4)(Resistance test - Neutral conductor )	-	1000	-
15.1 d)1)(Phyaical tests for insulation : Tensile Test)	-	1500	-
15.1 d)1)(Phyaical tests for insulation : Elongation )	-	0	-
15.1 d)1)(Physical tests for sheath : Tensile stregth )	-	0	-
15.1 d)1)(Physical tests for sheath : Elongation )	-	0	-
15.1 d)2)(Phyaical tests for insulation- Ageing in air Oven : Tensile Test)	-	0	-
15.1 d)2)(Phyaical tests for insulation - Ageing in air oven : Elongation )	-	0	-
15.1 d)2)(Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	0	-
15.1 d)2)(Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-	0	-
15.1 d)2)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-	2000	-
15.1 d)2)(Physical tests for outer sheath -Ageing in air oven : Elongation )	-	2000	-
15.1 d)2)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-	0	-
15.1 d)3)(Phyaical tests for insulation : Shrinkage )	-	500	-
15.1 d)3)(Phyaical tests for insulation : Shrinkage - Crack observed )	-	0	-
15.1 d)3)(Phyaical tests for Sheath : Shrinkage )	-	500	-
15.1 d)3)(Phyaical tests for Sheath : Shrinkage - Crack observed )	-	0	-
15.1 d)4)(Hot deformation : Insulation )	-	500	-
15.1 d)4)(Hot deformation : Sheath )	-	500	-
15.1 d)5)( Loss of mass in air oven- Insulation )	-	2000	-
15.1 d)5)( Loss of mass in air oven- sheath )	-	0	-
15.1 d)6)(Heat shock test- Insulation )	-	500	-
15.1 d)6)(Heat shock test- sheath )	-	0	-
15.1 d)7)(Thermal stability- insulation )	-	1000	-
15.1 d)7)(Thermal stability- Sheath )	-	0	-
15.1 e)(Insulation resistance test : Volume Resistivity )	-	1500	-
15.1 e)(Insulation resistance test : IR Constant )	-	0	-
15.1 f)(High voltage test ( water immersion test ))	-	3000	-
15.1 g)(High voltage test at room temperature)	-	1000	-
16.1(DETAILS OF TESTS : General)	-	0	-
16.2(DETAILS OF TESTS : High Voltage Test at Room Temperature)	-	1000	-
16.3.1(High Voltage Test ( Water Immersion Test ) : a.c. Test)	-	1000	-
16.3.2(High Voltage Test ( Water Immersion Test ) : d.c. Test)	-	3000	-
16.4(Flammability Test)	-	500	-
16.5(Oxygen Index Test)	-	5000	-
16.9(Test for Halogen Acid Gas Evolution)	-	5000	-
16.1(Temperature Index)	-	5000	-
17.1(IDENTIFICATION : Manufacturer’s Identification)	-	0	-
17.2(IDENTIFICATION : Cable Identification)	-	0	-
17.2.1(IDENTIFICATION : Cable Identification)	-	0	-
17.3(IDENTIFICATION : Cable Code)	-	0	-
15.1.e(Insulation resistance Test- Insulation resistance At Maximum rated temperature temperature)	-	375	-
15.1.e(Insulation resistance Test- Insulation resistance constant At Room temperature)	-	375	-
15.1.e(Insulation resistance Test- Volume Resistivity At Maximum rated temperature temperature)	-	375	-
15.1.e(Insulation resistance Test- Volume Resistivity At Room temperature)	-	375	-
16.4(Flammability Test- Un affected portion)	-	250	-
16.4(Flammability Test- Period of Burning)	-	250	-
9.3(Minimum Thickness of Reduce core insulation)	-	250	-
9.2(Thickness of Reduce core insulation)	-	250	-
3.1 Table 2 IS 8130(Number of wires in the conductor)	-	0	-
Cl No. 16.10(Smoke density test)	-	5000	-
Table 4(Copper purity test)	-	1000	-
Cl.8(Conductor, Number of wires.)	-	0	-
Cl.8(Conductor, Number of wires.)	-	0	-
Cl.8(Flexibility class)	-	0	-
[(Cl.15), (d), 2](After ageing, Elongation of Sheath [Percentage])	-	0	-
15.1 d)2)(Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-	0	-
Cl No. 16.10(Smoke density test)	-	5000	-
Table 4(Copper purity test)	-	1000	-
Cl.8(Conductor, Number of wires.)	-	0	-
Cl.8(Conductor, Number of wires.)	-	0	-
Cl.8(Flexibility class)	-	0	-
[(Cl.15), (d), 2](After ageing, Elongation of Sheath [Percentage])	-	0	-
15.4 a)(Cold bend test- Insulation ( Optional test))	-	1000	-
15.4 a)(Cold bend test- Sheath ( Optional test))	-	1000	-
15.4 b)(Cold impact test- Insulation ( Optional test))	-	1500	-
15.4 b)(Cold impact test- Sheath ( Optional test))	-	1500	-

13 Dec, 2027

-
Included w.e.f 12.02.2026 Exclusion: Cl 16.6 (Flame Retardance Test on Single Cables), 16.7 (Flame Retardance Test on Bunched Cables)

1258

International Testing Centre, MSME Technology Development Centre, Meerut

8177804

IS 17286 (2019)

Textiles – Water-proof multipurpose rain poncho with convertibility as bivouac – Specification

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4(STITCHING)	-	300	-
Clauses 6.4(Slide fastener)	-	500	-
Clauses 6.5(Hook and loop fastener)	-	500	-
Clauses 6.1, Table 1 (i)(Nature of fibre/filament)	-	800	-
Clauses 6.1, Table 1 (ii)(Nature of coating)	-	500	-
Clauses 6.1, Table 1 (iii)(Width, cm)	-	300	-
Clauses 6.1, Table 1 (iv)(End/dm, Min)	-	500	-
Clauses 6.1, Table 1 (v)(Picks/dm, Min)	-	500	-
Clauses 6.1, Table 1 (vi)(Mass (Single layer), g/sq. m)	-	500	-
Clauses 6.1, Table 1 (vii)(Mass of de-proofed fabric, g/sq. m)	-	800	-
Clauses 6.1, Table 1 (viii)(Breaking strength (strip test) (5 × 20 cm fabric between grips), N, Min: a) Warp-wise b) Weft-wise)	-	500	-
Clauses 6.1, Table 1 (ix)(Tearing strength (Method A-1), N, Min: a) Warp-wise b) Weft-wise)	-	500	-
Clauses 6.1, Table 1 (x)(Colour fastness to washing, Test C(3): a) Change in colour b) Staining on adjacent fabric)	-	500	-
Clauses 6.1, Table 1 (xi)(Colour fastness to rubbing a) Dry b) Wet)	-	500	-
Clauses 6.1, Table 1 (xii)(Colour fastness to light)	-	1500	-
Clauses 6.1, Table 1 (xiii)(Dimensional change due to relaxation, Max, percent: a) Warp-wise b) Weft-wise)	-	800	-
Clauses 6.1, Table 1 (xiv)(Resistance to accelerated ageing at 70°C ± 1°C for 168 h in hot air circulating oven)	-	800	-
Clauses 6.1, Table 1 (xv)(Resistance to low temperature [(-)30 ± 2°C] for 6 h)	-	800	-
Clauses 6.1, Table 1 (xvi)(Resistance to damage by flexing (after 100,000 cycle))	-	500	-
Clauses 6.1, Table 1 (xvii)(Blocking)	-	500	-
Clauses 6.1, Table 1 (xviii)(pH value of aqueous extract (Cold method))	-	500	-
Clauses 6.1, Table 1 (xix)(Water repellency (face side- uncoated), spray rating, Min)	-	500	-
Clauses 6.1, Table 1 (xx)(Hydrostatic pressure head test (Water column height at 60 cm for 60 min), (face side- uncoated))	-	1200	-
Clauses 6.1, Table 1 (xxi)(Bundesmann-shower test (Double layers as used in the poncho- face side- uncoated), (Expose the specimen to the shower for 30 min): a) Amount of water absorption, Max, percent)	-	800	-
Clauses 6.1, Table 1 (xxii)(Moisture vapour transmission, mg/cm2 /h, Min)	-	800	-
Clauses 6.1, Table 1 (xxiii)(Bending length, cm, Max: a) Warp-wise b) Weft-wise)	-	500	-
Clause 6.2, Table 2 (i)(Nature of fibre/filament)	-	500	-
Clause 6.2, Table 2 (ii)(Length, cm)	-	300	-
Clause 6.2, Table 2 (iii)(Mass per linear metre, g)	-	500	-
Clause 6.2, Table 2 (iv)(Breaking strength (200 mm gauge length), N, Min)	-	500	-
Clause 6.2, Table 2 (v)(Colour fastness to washing, Test C(3): a) Change in colour b) Staining on adjacent fabric)	-	500	-
Clause 6.2, Table 2 (vi)(Colour fastness to light)	-	1500	-
Clause 6.2, Table 2 (vii)(Dimensional change due to relaxation, length wise directions, percent, Max)	-	800	-
Clause 6.2, Table 2 (viii)(pH value of aqueous extract (cold method))	-	500	-
Clause 6.3, Table 3 (i)(Nature of fibre/filament)	-	500	-
Clause 6.3, Table 3 (ii)(Number of ends in full width, Min)	-	500	-
Clause 6.3, Table 3 (v)(Mass per linear metre, g)	-	500	-
Clause 6.3, Table 3 (iii)(Number of picks/dm, Min)	-	500	-
Clause 6.3, Table 3 (vi)(Colour fastness to washing, Test C(3): a) Change in colour b) Staining on adjacent fabric)	-	500	-
Clause 6.3, Table 3 (vii)(Colour fastness to light)	-	1500	-
Clause 4.1(Tolerances)	-	300	-
Clause 7(MARKING)	-	300	-
Clause 8(PACKING)	-	300	-

15 Apr, 2027

-
-

1259

CIPET, Hyderabad

6111634

IS 15778 (2007)

Chlorinated polyvinyl chloride (Cpvc) pipes for potable hot and cold water distribution supplies - Specification

upto 150mm

138750 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5 Table 1(Classification of pipes)	-	0	25% DISCOUNT ON TEST CHARGES FOR BIS
6.2.1 Annex B(Chloride Content of Resin)	-	4300	25% DISCOUNT ON TEST CHARGES FOR BIS
6.3.1 Annex B(Chloride content)	-	4300	25% DISCOUNT ON TEST CHARGES FOR BIS
6.3.2 Annex C(Verification of the Malfunction Temperature, Tmal: )	-	11000	25% DISCOUNT ON TEST CHARGES FOR BIS Specimen preparation charges - 500
6.3.2 IS 13360 (Part 3/See 1)(Density)	-	700	25% DISCOUNT ON TEST CHARGES FOR BIS Specimen preparation charges - 625
7.1 IS 12235 (Part 1) Table 2(Dimension of Pipes: Mean outside Diameter)	-	500	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1,7.1.1 IS 12235 (Part 1) Table 2(Outside Diameter at any point)	-	0	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1.2 IS 12235 (Part 1) Table 2(Wall Thickness )	-	0	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1.3 (Effective length)	-	0	25% DISCOUNT ON TEST CHARGES FOR BIS
8(Pipe Ends)	-	500	25% DISCOUNT ON TEST CHARGES FOR BIS
9.1(Visual Appearance)	-	500	25% DISCOUNT ON TEST CHARGES FOR BIS
9.1(Visual Appearance)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
9.2 IS 12235 (Part 3)(Opacity)	-	700	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 9.3,IS 4985 Cl. 10.3(Lead (first extraction))	-	3000	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 9.3,IS 4985 Cl. 10.3(Lead (third extraction))	-	3000	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 9.3,IS 4985 Cl. 10.3(Dialkyl tin C4 and higher homologues measured as tin (third extraction))	-	3000	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 9.3,IS 4985 Cl. 10.3(Cadmium (for all three extracts) )	-	3000	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 9.3,IS 4985 Cl. 10.3(Mercury (for all three extracts) )	-	3000	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances such as 'di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate' (third extraction) )	-	3000	25% DISCOUNT ON TEST CHARGES FOR BIS
9.4 IS 12235(Part 5/Sec 1 and Sec 2)(Reversion Test : When tested by the method prescribed in IS 12235(Part 5/Sec 1 and Sec 2), a length of pipe 200 + 20 mm long shall not alter in length by more than 5 percent.)	-	700	25% DISCOUNT ON TEST CHARGES FOR BIS
9.5 IS 12235(Part 2)(Vicat Softening Temperature: When tested by the method prescribed in IS 12235(Part 2), the Vicat softening temperature of the specimen shall not be less than 110°C.)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
9.6 IS 12235(Part 14)(Density)	-	700	25% DISCOUNT ON TEST CHARGES FOR BIS Specimen preparation charges - 625
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	850	25% DISCOUNT ON TEST CHARGES FOR BIS
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	4800	25% DISCOUNT ON TEST CHARGES FOR BIS
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	11000	25% DISCOUNT ON TEST CHARGES FOR BIS
10.2 Table 3 IS 12235 (Part 8/Sec 1)(Thermal Stability by Hydrostatic Pressure Testing)	-	1000	25% DISCOUNT ON TEST CHARGES FOR BIS Specimen preparation/Conditioning charges - 109500 (disc. not applicable)
10.3 IS 4985 Table 4(Resistance to External Blow at O°C: When tested by the method prescribed in IS 4985, with classified striker mass and drop height as given in Table 4, the pipe shall have a true impact rate of not more than 10 percent.)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS Specimen preparation charges - 500
10.4 IS 12235(Part 19)(Flattening Test)	-	500	25% DISCOUNT ON TEST CHARGES FOR BIS
10.5 IS 12235(Part 13)(Tensile Strength : When tested by the method prescribed in IS 12235(Part 13), the tensile strength at yield shall not be less than 50 MPaat 27±2°C. )	-	1300	25% DISCOUNT ON TEST CHARGES FOR BIS Specimen preparation charges - 625

23 Feb, 2027

-
-

1260

COTERD SOLUTIONS (OPC) PRIVATE LIMITED, AC TEST LAB, GREATER NOIDA

8170806

IS 302 : Part 1 (2024)

Household and Similar Electrical Appliances â Safety Part 1 General Requirements (Seventh Revision)

All as per specification

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12(Charging of metal-ion batteries)	-	5000	-
6(Classification- IS 302-1)	-	500	-
5(General conditions for the tests)	-	500	-
11.8(Temperature rise)	-	5000	-
11.7(Duration corresponding)	-	5000	-
11.6(Combined appliances)	-	5000	-
11.5(Motor-operated appliances)	-	5000	-
11.4(Heating appliances)	-	5000	-
8.1.5(Live parts of built-in appliances)	-	5000	-
18(Endurance)	-	5000	-
17(Overload protection of transformers and associated circuits)	-	5000	-
16(Leakage current and electric strength)	-	5000	-
4(General requirement)	-	1000	-
32.1(Radiation Toxicity and Similar Hazards)	-	5000	-
31(Resistance to Rusting)	-	5000	-
30.2(Needle Flame Test)	-	5000	-
30.2(Glow Wire Test)	-	5000	-
30.1(Ball pressure test)	-	5000	-
29(clearance, creepage distances and solid insulation)	-	5000	-
28(Screw test and connections)	-	5000	-
27.1(Provision for Earthing, IS 302-1)	-	5000	-
26(Terminals for external conductors)	-	5000	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	5000	-
24(Components)	-	5000	-
23.1(Internal Wiring, IS 302-1)	-	5000	-
22.1(Construction, IS 302-1)	-	5000	-
21.1(Mechanical Strength, IS 302-1)	-	5000	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	5000	-
19(Abnormal Operation)	-	5000	-
17(Over Load Protection of Transformers and associated circuits)	-	5000	-
16.3(Electric Strength (after clause 15 and 16.2))	-	5000	-
16.2(Leakage Current (after Clause 15))	-	5000	-
16.1(General)	-	0	Already Mentioned at 16.1
16.0(General)	-	1000	-
15.3(Humidity Test)	-	5000	-
15.2(Spillage Test)	-	5000	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	5000	-
15.0(Moisture resistance)	-	5000	-
14(Transient Over Voltages)	-	5000	-
13.3(Electric Strength at operating temperature)	-	5000	-
13.2(Leakage current at operating temperature)	-	5000	-
13(Leakage current and electric strength at operating temperature)	-	5000	-
11.3(Heating)	-	5000	-
11.2(General)	-	1000	-
11.1(General)	-	1000	-
10.2(Current input)	-	0	Already covered at 10.1
10.1(Power input)	-	5000	-
9(Starting of motor operation test requirements and tests)	-	5000	-
8.1.4(Protection against live parts against protective impedance)	-	5000	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	0	Already covered at 8.1.1
8.1.2(Protection against live parts in openings)	-	0	Already covered at 8.1.1
8.1.1(Protection against live parts in all positions)	-	5000	-
A.2(Earth continuity test)	-	5000	-
Annex C(Ageing test on motors)	-	5000	-
Annex D(Thermal motor protectors)	-	5000	-
15.2(Moisture resistance)	-	5000	-
19.17(Abnormal Operation, IS 302-1)	-	5000	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	5000	-
21.2(Mechanical Strength, IS 302-1)	-	5000	-
21.3(Mechanical Strength, IS 302-1)	-	5000	-
22.5(Construction)	-	1000	-
22.6(Construction, IS 302-1)	-	1000	-
22.11(Construction, IS 302-1)	-	1000	-
22.16(Construction)	-	1000	-
22.32(Construction, IS 302-1)	-	1000	-
22.42(Construction)	-	1000	-
23.3(Internal Wiring, IS 302-1)	-	1000	-
25.6(Supply connection and external flexible cords, IS 302-1)	-	1000	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
26.5(Terminals for external conductors)	-	1000	-
27.5(Provision for Earthing, IS 302-1)	-	1000	-
28.1(Screws and connections)	-	1000	-
22.2(Construction, IS 302-1)	-	1000	-
22.3(Construction, IS 302-1)	-	1000	-
B.22.4(Construction, IS 302-1)	-	1000	-
B.22.5(Construction, IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.3(Marking- IS 302-1)	-	0	-
7.4(Marking- IS 302-1)	-	0	-
7.5(Marking- IS 302-1)	-	0	-
7.6(Marking- IS 302-1)	-	0	-
7.7(Marking- IS 302-1)	-	0	-
7.8(Marking- IS 302-1)	-	0	-
7.9(Marking- IS 302-1)	-	0	-
7.1O(Marking- IS 302-1)	-	0	-
7.11(Marking- IS 302-1)	-	0	-
7.12(Marking- IS 302-2-15)	-	0	-
7.13(Marking- IS 302-1)	-	0	-
6(Classification- IS 302-1)	-	1000	-
7.15(Marking- IS 302-1)	-	0	-
11(Heating, IS 302-1, Table -3)	-	5000	-
11(Heating, IS 302-1, Table -3)	-	0	-
11(Heating, IS 302-1, Table -3)	-	0	-
11(Heating, IS 302-1, Table -3)	-	0	-
11(Heating, IS 302-1, Table -3)	-	0	-
11(Heating, IS 302-1, Table -3)	-	0	-
11(Heating, IS 302-1)	-	0	-
19.7(Abnormal Operation, IS 302-1)	-	5000	-
19.8(Abnormal Operation, IS 302-1)	-	0	-
19.9(Abnormal Operation, IS 302-1)	-	0	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	0	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	0	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	0	-
19.17(Abnormal Operation, IS 302-1)	-	0	-

15 Jul, 2028

-
-

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number