| 14671 |
BIS, Central Laboratory (CL)
| None
| IS 8737 (2017) |
Valve fittings for use with liquefied petroleum gas (LPG) cylinders for more than 5 litre water capacity - Specification (Second Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.3.1a (Tensile Strength-IS 1608) |
- |
|
|
|
| 4.3.1b (Elongation-IS 1608) |
- |
|
|
|
| 4.4 (Izod impact strength-IS 1598) |
- |
|
|
|
| 5.1.1a
Fig 1,2 (SCREW THREADS ON THE VALVE STEM- Type 1 Threads-IS 15894) |
- |
|
|
|
| 7.1 (Design Requirements) |
- |
|
|
|
| 7.3 (Design Requirements) |
- |
|
|
|
| 7.4 (Design Requirements) |
- |
|
|
|
| 7.5 (Design Requirements) |
- |
|
|
|
| 7.6 (Design Requirements) |
- |
|
|
|
| 7.8ai
Annex D of IS 9798 (All rubber and other moulded parts coming in contact with LPG in the construction of the valve shall be compatible with LPG, when tested according to Annex D of IS 9798) |
- |
|
|
|
| 7.8bi
Annex H of IS 9798. (All rubber and other moulded parts shall be suitable for extreme climatic conditions in which the valve is likely to be used, the range of temperature being -20°C to + 65°C. The method of test shall be according to Annex H of IS 9798.) |
- |
|
|
|
| 4.6.2,4.6.2.1,4.6.2.2a (Moulded parts (plastics, etc) shall be subjected to immersion test (resistance to hydrocarbons)(Cl.4.6.2.1)
Increase in mass :) |
- |
|
|
|
| 7.10 (The minimum finished wall thickness at any portion of the valve shall not be less than 2.5 mm) |
- |
|
|
|
| 8.1 (Stress Corrosion Test for Copper Alloy
As per IS 2305) |
- |
|
|
|
| 8.2 (Hydrostatic Test) |
- |
|
|
|
| 8.3.1 (Pneumatic Test:
Tightness of Joint Packing (in Valve Outlet) and Valve Spindle) |
- |
|
|
|
| 8.3.2 (Pneumatic Test:
Tightness of Valve Spindle and Valve Housing) |
- |
|
|
|
| 8.3.3 (Pneumatic Test:
Tightness of Joint Packing and Housing) |
- |
|
|
|
| 9.2a (Cycle Test) |
- |
|
|
|
| 9.2bi (After the cycle test, the valve shall besubjectedto the pneumatic test given in 8.3 and shall performsatisfactorily:-
lPneumatic Test ,after cycle test:
Tightness of Joint Packing (in Valve Outlet) and Valve Spindle) |
- |
|
|
|
| 9.2bii (Pneumatic Test ,after cycle test:
Tightness of Valve Spindle and Valve Housing) |
- |
|
|
|
| 9.2biii (Pneumatic Test ,after cycle test:
Tightness of Joint Packing and Housing) |
- |
|
|
|
| 9.3
(Operation Test) |
- |
|
|
|
| 9.4 (Valve Fitting Testing Torque :) |
- |
|
|
|
| 9.5a
Table 3,Fig. 8 (Impact Test) |
- |
|
|
|
| 9.5bi (After the Impact test, the valve shall satisfy Pneumatic test as perCl.8.3:-
lPneumatic Test ,after cycle test:
Tightness of Joint Packing (in Valve Outlet) and Valve Spindle) |
- |
|
|
|
| 9.5bii (Pneumatic Test ,after cycle test:
Tightness of Valve Spindle and Valve Housing) |
- |
|
|
|
| 9.5biii (Pneumatic Test ,after cycle test:
Tightness of Joint Packing and Housing) |
- |
|
|
|
| 4.3.1a (Tensile Strength-IS 1608) |
- |
|
|
|
| 6.2 (VALVE OUTLET CONNECTIONS: Spring loaded self-closing Valve) |
- |
|
|
|
| 4.2.1Sl.No.i (Copper) |
- |
|
|
|
| 4.2.1Sl.No.ii (Lead) |
- |
|
|
|
| 4.2.1Sl.No.iii (Iron) |
- |
|
|
|
| 4.2.1Sl.No.iv (Manganese) |
- |
|
|
|
| 4.2.1Sl.No.vi (Zinc) |
- |
|
|
|
| 4.2.1Sl.No.v (others(inclusive of iron)) |
- |
|
|
|
|
- |
-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm;
excluding -; (Cl 4.6.1.1)-Ozone test (Resistance to ozone cracking) |
| 14672 |
BIS, Central Laboratory (CL)
| None
| IS 5986 (2017) |
Hot rolled steel sheet, plate and strip for forming and flanging purposes - Specification (Fourth Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 8 (UTM) |
- |
|
|
|
| Cl 9 (Press) |
- |
|
|
|
| Cl 13 (Workmanship) |
- |
|
|
|
| Cl 15 (Length, Width & Thickness) |
- |
|
|
|
| 7.1 (Carbon %) |
- |
|
|
|
| 7.1 (Sulphur %) |
- |
|
|
|
| 7.1 (Phosphorus %) |
- |
|
|
|
| 7.1 (Manganese %) |
- |
|
|
|
| 7.1 (Silicon %) |
- |
|
|
|
| 7.1 ( Aluminium %) |
- |
|
|
|
| 7.1 ( Nitrogen%) |
- |
|
|
|
| 7.1 ( Copper %) |
- |
|
|
|
| 7.1 (V) |
- |
|
|
|
| 7.1 ( Ti) |
- |
|
|
|
| 7.1 (Cr) |
- |
|
|
|
| 7.1 (Mo) |
- |
|
|
|
| 7.1 ( Nb) |
- |
|
|
|
| Cl. 7 (Micro Alloy) |
- |
|
|
|
| Cl. 7 (CE) |
- |
|
|
|
| Cl. 7 (Boron) |
- |
|
|
|
| Cl. 7 (Ti+Nb+V+B) |
- |
|
|
|
| Cl. 7 (Cr+Ni+Mo) |
- |
|
|
|
|
- |
-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm;
excluding -; i)Hole Expansion Ratio Test(CL 11) |
| 14673 |
BIS, Southern Regional Laboratory (SRL)
| None
| IS 208 (1996) |
Door Handles - Specification ( Sixth Revision ) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6.1 Table2A & 2B and Fig 1,2,3,4 (DIMENSIONS - Size (A,B,C,D,E,F,G,H,I)) |
- |
|
|
|
| 6.1 Table2A & 2B and Fig 1,2,3,4 (DIMENSIONS - Size 1. No. in each Lug 2. No. in a plate when a continious plate is used 3. Size Designation of Counter-sunk Head Wood Screws
(as per IS 6760: 1972)) |
- |
|
|
|
| 6.2 (Tolerance) |
- |
|
|
|
| 9 (MARKING) |
- |
|
|
|
| 10 (PACKING) |
- |
|
|
|
|
- |
-
" 6 pcs .
Excl anodic coating, chemical tests |
| 14674 |
BIS, Central Laboratory (CL)
| None
| IS 15182 (2002) |
Propiconazole EC - Specification |
- |
Rs.2450.00 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.2.1 (Description) |
- |
|
|
|
| 3.2.2 (Cold Test) |
- |
|
|
|
| 3.2.3 (Flash Point (Abel)) |
- |
|
|
|
| 3.2.4 (Emulsion Stability) |
- |
|
|
|
| 3.3.1 (Pretilachlor content) |
- |
|
|
|
| 3.3.2 (Acidity) |
- |
|
|
|
|
- |
-
excluding Cl. 3.3.1 Propiconazole Content; |
| 14675 |
BIS, Central Laboratory (CL)
| None
| IS 14158 (1994) |
Cyfluthrin WP - Specification |
- |
Rs.5600/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.2 (Description) |
- |
|
|
|
| 3.3 Table 1 i (Cyfluthrin content ) |
- |
|
|
|
| 3.3 Table 1 ii (Sieving requirements material passing through 75 micron IS sieve) |
- |
|
|
|
| 3.3 Table 1 iii (Suspensibility) |
- |
|
|
|
| 3.3 Table 1 iv (Acidity/Alkalinity) |
- |
|
|
|
| 3.3 Table 1 v (Wettability) |
- |
|
|
|
|
- |
-
excluding Cl 3.3, Table1, Sl No. I & III Content & Suspensibility; |
| 14676 |
BIS, Northern Regional Laboratory (NRL)
| None
| IS 1783 : Part 1 (2014) |
Drums large, fixed ends - Specification: Part 1 grade A drums (Fourth Revision) |
- |
Rs.4800/- and testing charges as per relevant referred View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4 (Capacity) |
- |
|
|
|
| 5 (Dimensions (Type 1 C Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 D Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 C Drums Figure 2)) |
- |
|
|
|
| 5 (Dimensions (Type 1 D Drums Figure 2)) |
- |
|
|
|
| 6 (Material) |
- |
|
|
|
| 7.1 (Construction) |
- |
|
|
|
| 7.2 (Construction) |
- |
|
|
|
| 7.3 (Construction) |
- |
|
|
|
| 7.4 (Construction) |
- |
|
|
|
| 7.5 (Construction) |
- |
|
|
|
| 7.6 (Construction) |
- |
|
|
|
| 8 (Finish ) |
- |
|
|
|
| 9.3 (Hydraulic Pressure Test) |
- |
|
|
|
| 9.2 (Drop Test) |
- |
|
|
|
|
- |
-
Excluding Microalloying Elements |
| 14677 |
BIS, Central Laboratory (CL)
| None
| IS 15219 (2002) |
Aluminium phosphide powder formulation |
- |
Rs.1550.00 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.2 (Description) |
- |
|
|
|
| 3.3.1 (Aluminium Phosphide Content) |
- |
|
|
|
|
- |
-
- |
| 14678 |
BIS, Central Laboratory (CL)
| None
| IS 6967 (1973) |
Specification for steels for electrically welded round link chains |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.1 Table 2 (Carbon- IS 228) |
- |
|
|
|
| 5.1 Table 2 (Manganese- IS 228) |
- |
|
|
|
| 5.1 Table 2 (Sulphur- IS 228) |
- |
|
|
|
| 5.1 Table 2 (Phosphorous- IS 228) |
- |
|
|
|
| 5.1 Table 2 (Silicon- IS 228) |
- |
|
|
|
|
- |
-
- |
| 14679 |
BIS, Central Laboratory (CL)
| None
| IS 1660 (2009) |
Wrought aluminium utensils - Specification (First Revision) |
- |
Rs 6760/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.1 (Classification Heavy/Medium/L:ight) |
- |
|
|
|
| 0.5 (Fabrication) |
- |
|
|
|
| 5.1 (The utensil shall be pressed or spun from one piece) |
- |
|
|
|
| 5.2 ( Body Thickness of the thinnest part of the finished utensil, mm Not declared ) |
- |
|
|
|
| 5.2 (Lid Thickness of the finished utensil, mm) |
- |
|
|
|
| 6.1 & Table 1 ( i) Name of Utensil ) |
- |
|
|
|
| 6.1 & Table 1 (ii) Shape of Utensil) |
- |
|
|
|
| 6.1 & Table 1 ( Nominal Size, mm) |
- |
|
|
|
| 6.1 & Table 1 (Inside dia, Φ D mm Not declared ) |
- |
|
|
|
| 6.1 & Table 1 (Outside dia Ф NA) |
- |
|
|
|
| 6.1 & Table 1 (Height NA) |
- |
|
|
|
| 6.1 & Table 1 (Capacity, l NA) |
- |
|
|
|
| 6.1 ( Minimum sheet thickness for nominal size ) |
- |
|
|
|
| 7.1 (HANDLES ,When fitted shall be of aluminium, stainless steel or of other suitable fire resistance material These shall be fastened to the utensils by tightly drawn aluminium or stainless steel rivets, by welding, by screwing to cast bosses or by riveting between flange at the end of the handles. Handles shall be so shaped and positioned to facilitate the carrying and handling of the utensils in normal use ) |
- |
|
|
|
| 7.2 (Handles shall be sufficiently strong to support a mass in the utensils equivalent to three times the mass of the water capacity of the utensils in the position of normal use without visible permanent deformation of the handle or utensil) |
- |
|
|
|
| 8.1 (The utensils shall be clean reasonably free from distortion, dents, wrinkles, wavy surface, burrs, scratches, pitting and deep tool marks and other surface defects) |
- |
|
|
|
| 8.2 (The design of the utensils shall be such that it is easy to clean and prevent accumulation of dirt) |
- |
|
|
|
| 8.4.1.2 ( Finish of the coating: The coating shall be smooth continuous and uniform in appearance, and shall be adherent. It shall be free from powdery areas, loose films and discontinuities, such as breaks and scratches. The size and number of contact marks shall be minimum consistent with good practice.) |
- |
|
|
|
| ( Clauses 4, 4.1, 4.2 and 4.3) (Copper of IS 21) |
- |
|
|
|
| ( Clauses 4, 4.1, 4.2 and 4.3) (Magnesium of IS 21) |
- |
|
|
|
| ( Clauses 4, 4.1, 4.2 and 4.3) (Silicon of IS 21) |
- |
|
|
|
| ( Clauses 4, 4.1, 4.2 and 4.3) (Iron of IS 21) |
- |
|
|
|
| ( Clauses 4, 4.1, 4.2 and 4.3) (Manganese of IS 21) |
- |
|
|
|
| ( Clauses 4, 4.1, 4.2 and 4.3) (Zinc of IS 21) |
- |
|
|
|
| ( Clauses 4, 4.1, 4.2 and 4.3) (Chromium of IS 21) |
- |
|
|
|
| ( Clauses 4, 4.1, 4.2 and 4.3) (Titanium / other Grain of IS 21) |
- |
|
|
|
| 8.4.2 (A coating of thickness 25 to 100 microns is generally required) |
- |
|
|
|
| 8.4.3 (Abrasion Resistance When the coating surface is rubbed two or three times with emery paper with emery conforming to grit number 180 using medium finger pressure, it shall not abrade the surface but shall skid over the surface showing not more than a trace of whitening of the surface) |
- |
|
|
|
| 8.4.4 (The colour of the hard anodic coating varies depending upon the alloy, thickness of the coating and electrolye. Normally the colour may vary from dark grey (almost black) to light grey. ) |
- |
|
|
|
| 8.4.4 (The film will appear dark grey when wet. ) |
- |
|
|
|
| 8.4.5 (When the coated surface is rubbed two or three times with fine emery paper grit number 180 using medium finger pressure, cloth or paper shall not abrade the surface. A faint trace of whitening on the cloth or paper is permissible) |
- |
|
|
|
| 9 (The manufacturer shall provide full instructions for use and cleaning for coated or hard anodized utensils) |
- |
|
|
|
| 10 (Each vessel shall be legibly and indelibly stamped on the outside surface or handle with the manufacturer’s name or registered trade-mark, size and thickness or class. ) |
- |
|
|
|
| Clause 8.6.1 (Performance test) |
- |
|
|
|
| Clause 8.6.2 (Ground Nut Oil Test for Leakage) |
- |
|
|
|
| 5.4 (Qualitative and Anodized Coating) |
- |
|
|
|
| 5.5 (Qualitative and Anodized Coating) |
- |
|
|
|
| 8.3 (Anodized Coating) |
- |
|
|
|
| 8.5 (Plastic Coating) |
- |
|
|
|
| 8.1 (Qualitative) |
- |
|
|
|
|
- |
-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm;
excluding TF not available for 1. Coating test 2. Hard Anodized; |
| 14680 |
BIS, Central Laboratory (CL)
| None
| IS 11513 (2017) |
Hot rolled carbon steel strip for cold rolling purposes - Specification (Second Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 8 (Workmanship) |
- |
|
|
|
| Cl 9 (Length, Width, Thickness, Crown, Edge Camber & Difference in Thickness Across Width ) |
- |
|
|
|
| 6.1 (Carbon %) |
- |
|
|
|
| 6.1 (Sulphur %) |
- |
|
|
|
| 6.1 (Phosphorus %) |
- |
|
|
|
| 6.1 (Manganese %) |
- |
|
|
|
| 6.1 (Silicon %) |
- |
|
|
|
| 6.1 ( Aluminium %) |
- |
|
|
|
| 6.1 ( Nitrogen%) |
- |
|
|
|
| 6.1 (Boron) |
- |
|
|
|
| 6.1 ( Copper %) |
- |
|
|
|
| 6.1 ( Ti) |
- |
|
|
|
| 6.1 (V) |
- |
|
|
|
| 6.1 ( Nb) |
- |
|
|
|
| 6.1 (Microalloying) |
- |
|
|
|
|
- |
-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm; |
| 14681 |
BIS, Central Laboratory (CL)
| None
| IS 336 (1973) |
Specification for ether |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl no .3.2 (Odour and Taste ) |
- |
|
|
|
| Cl no .3.3.1 (Composition ) |
- |
|
|
|
| Cl no .3.4 (Solubility ) |
- |
|
|
|
| Cl no .3.5 [ Table 1, Sl no.(i) ] Appendix A 2 (Relative density at 20 °C Solvent Grade ) |
- |
|
|
|
| Cl no .3.5 [ Table 1, Sl no.(iv) ] Appendix A 5 (Residue on Evaporation ) |
- |
|
|
|
| Cl no .3.5 [ Table 1, Sl no.(v) ] Appendix A 6 (Methyl alcohol ) |
- |
|
|
|
| Cl no .3.5 [ Table 1, Sl no.(vi) ] Appendix A 7 (Aldehydes and acetone ) |
- |
|
|
|
| Cl no .3.5 [ Table 1, Sl no.(vii) ] Appendix A 8 (Sulphurous acids and other free acids ) |
- |
|
|
|
|
- |
-
excluding iii) Distillation range; |
| 14682 |
BIS, Eastern Regional Laboratory (ERL)
| None
| IS 9857 (1990) |
Welding cables - Specification (First Revision) |
- |
Rs 11400/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4 (Conductor : Material ) |
- |
|
|
|
| 5 (SEPARATOR) |
- |
|
|
|
| 6 (COVERING) |
- |
|
|
|
| 7 (CONDUCTOR : CONSTRUCTION ) |
- |
|
|
|
| 8 (S E P A R A T O R) |
- |
|
|
|
| 9.1 (C O V E R I N G : Application ) |
- |
|
|
|
| 9.2 (T h i c k n e s s o f C o v e r i n g) |
- |
|
|
|
| 9.3 (T o l e r a n c e on Thickness o f C o v e r i n g) |
- |
|
|
|
| 9.4 (A p p l i c a t i o n of C o v e r i n g) |
- |
|
|
|
| 9.5 (Colour of C o v e r i n g) |
- |
|
|
|
| 10.1 a) 1) (Annealing test - IS 10810: Part 1) |
- |
|
|
|
| 10.1 a) 2) (Conductor resistance tes - IS 10810 : Part 5) |
- |
|
|
|
| 10.1 c) 1) (Physical tests for
covering : Tensile strength ) |
- |
|
|
|
| 10.1 c) 1) (Physical tests for
covering : Elongation at break ) |
- |
|
|
|
| 10.1 c) 2) (Physical tests for
covering - Ageing in Air oven : Tensile strength variation) |
- |
|
|
|
| 10.1 c) 2) (Physical tests for
covering -Ageing in Air oven : Elongation at break ) |
- |
|
|
|
| 10.1 c) 5) (Hot set test ) |
- |
|
|
|
| 10.1 c) 5) (Permanent set ) |
- |
|
|
|
| 11.1 (High Voltage Test ( Water Immersion
Test )) |
- |
|
|
|
| 11.4 (Flammability Test) |
- |
|
|
|
| 12.1 (Manufacturer's Identification) |
- |
|
|
|
| 12.2 (Cable Identification) |
- |
|
|
|
| 12.3 (Cable Code) |
- |
|
|
|
|
- |
-
Except T/S after ageing in air bomb, .oil resistance test, static flexibility test. "Declarations Required: Type of covering & Size" |
| 14683 |
BIS, Northern Regional Laboratory (NRL)
| None
| IS 12592 (2002) |
Precast concrete manhole cover and frame - Specification (First Revision) |
- |
1809 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3 (Grade) |
- |
|
|
|
| 3 (Type/Shape of Cover) |
- |
|
|
|
| 4.4 (Reinforcement) |
- |
|
|
|
| 4.4 (Reinforcement) |
- |
|
|
|
| 4.5 (Steel Fibres - Diameter / equivalent diameterofsteel tibres) |
- |
|
|
|
| 4.5 (Steel Fibres - The aspect ratio of the tibres) |
- |
|
|
|
| 5.2 and Table 1 (Dimensions of Frame - A) |
- |
|
|
|
| 5.2 and Table 1 (Dimensions of Frame - B) |
- |
|
|
|
| 5.2 and Table 1 (Dimensions of Frame - C) |
- |
|
|
|
| 5.2 and Table 1 (Dimensions of Frame - D) |
- |
|
|
|
| 5.2 and Table 1 (Dimensions of Frame - E) |
- |
|
|
|
| 5.2 and Table 1 (Dimensions of Frame - F) |
- |
|
|
|
| 5.2 (Dimensions of cover- Diameter) |
- |
|
|
|
| 5.2 (Clearance at top between the frame and the cover all round the periphery) |
- |
|
|
|
| 5.2 (Top surface ofthe frame and cover is in level) |
- |
|
|
|
| 5.2 (Suitable taper matching with taper given for the frame shall be provided to the periphery of the cover) |
- |
|
|
|
| 5.2 and Fig 1 (Clear cover to reinforcement) |
- |
|
|
|
| 5.2 and Fig 1 (Distance of housing from the edge) |
- |
|
|
|
| 7.4.1 (Edge Protection and Finishing - Frame) |
- |
|
|
|
| 7.4.1 (Edge Protection and Finishing - Frame) |
- |
|
|
|
| 7.4.1 (Edge Protection and Finishing - Frame) |
- |
|
|
|
| 7.4.1 (Edge Protection and Finishing - Frame) |
- |
|
|
|
| 7.4.2 (Edge Protection and Finishing - Cover) |
- |
|
|
|
| 8 (LIFTING HOOKS) |
- |
|
|
|
| 9.1 (General) |
- |
|
|
|
|
- |
-
Excluding Load Test |
| 14684 |
BIS, Southern Regional Laboratory (SRL)
| None
| IS 205 (1992) |
Non - Ferrous metal butt specification (Fourth Revision) |
- |
Rs.1500.00 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3 (TYPES) |
- |
|
|
|
| 5.1- Table 2,3,4,5 & Fig-1 & 2 (Dimensions- Type of Hinge 1.Length 2.Breadth 3.Butt Dia 4.Pin Dia 5.Thickness of Flap) |
- |
|
|
|
| 5.1- Table 2,3,4,5 & Fig-1 & 2 (Dimensions- 1. Holes for Screw Desination 2. No. of screw Holes) |
- |
|
|
|
| 5.2 ,Table 6 (Tolerances-Tolerances on dimensions of hinges ) |
- |
|
|
|
| 6.2- Table 2,3,4,5 (Kunckles) |
- |
|
|
|
| 6.3 (Screw Holes) |
- |
|
|
|
| 6.3.2- Table 2,3,4,5 (Number of Holes) |
- |
|
|
|
| 8.1 (Packing - Each hinge shall be packed in card board boxes or in any other approved packing. The number of hinges in a package shall be as under) |
- |
|
|
|
| 8.2 (Packing -Each Package shall bear the following Particulars) |
- |
|
|
|
| 6.3.3 Fig-1 (Position of Holes) |
- |
|
|
|
|
- |
-
" 6 pcs .
Excluding Excl anodic coating, chemical tests |
| 14685 |
BIS, Central Laboratory (CL)
| None
| IS 2028 (2004) |
Open jaw wrenches (Spanners) - Specification (Fijih Revision) |
- |
Rs.3700/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.1 (Dimensions- a) |
- |
|
|
|
| 3.1 (Dimensions- b) |
- |
|
|
|
| 3.1 (Dimensions- l) |
- |
|
|
|
| 3.2, 3.3, 3.4 (Dimensions- a) |
- |
|
|
|
| 3.2, 3.3, 3.4 (Dimensions- b1) |
- |
|
|
|
| 3.2, 3.3, 3.4 (Dimensions- b2) |
- |
|
|
|
| 3.2, 3.3, 3.4 (Dimensions- l) |
- |
|
|
|
| 5 (Hardness- upto 32 mm) |
- |
|
|
|
| 5 (Hardness- over 32 mm) |
- |
|
|
|
| 6 (Workmanship And Finish) |
- |
|
|
|
| 6 (Workmanship And Finish) |
- |
|
|
|
|
- |
-
Please refer status of IS 3748 for test facility status of Chemical disciplince.;
excluding -; i)Torque testing(CL 8) |
| 14686 |
BIS, Central Laboratory (CL)
| None
| IS 6240 (2008) |
Hot rolled steel plate (Up To 6 Mm) sheet and strip for the manufacture of low pressure liquefiable gas cylinders (Fourth Revision) |
- |
9710 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 7 (UTM) |
- |
|
|
|
| Cl 8 (Press) |
- |
|
|
|
| Cl 9 (Strainage Embrittlement) |
- |
|
|
|
| Cl 10 (Erichsen Cupping) |
- |
|
|
|
| Cl 13 (Length, Width & Thickness) |
- |
|
|
|
| 6.1 (Carbon %) |
- |
|
|
|
| 6.1 (Sulphur %) |
- |
|
|
|
| 6.1 (Phosphorus %) |
- |
|
|
|
| 6.1 (Manganese %) |
- |
|
|
|
| 6.1 (Silicon %) |
- |
|
|
|
| 6.1 ( Aluminium %) |
- |
|
|
|
| 6.1 (Nitrogen%) |
- |
|
|
|
|
- |
-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm; |
| 14687 |
BIS, Northern Regional Laboratory (NRL)
| None
| IS 2785 (1979) |
Specification for natural cheese (Hard Variety), processed cheese, processed cheese spread and soft cheese (First Revision) |
- |
Rs 3000/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.3.1 (Appearance) |
- |
|
|
|
| 3.3.2 (Odour and Flavour) |
- |
|
|
|
| 3.3.3 (Texture and Consistency) |
- |
|
|
|
| 3.3.4- Table 1-i (Moisture- Annex A) |
- |
|
|
|
| 3.3.4- Table 1-ii (Milk fat ( on dry basis)- Annex B) |
- |
|
|
|
| 3.3.4- Table 1-iii (Salt ( added sodium chloride)- Annex C) |
- |
|
|
|
| 3.3.4- Table 1-i (Moisture- Annex A) |
- |
|
|
|
|
- |
-
Excluding Lactose Content |
| 14688 |
BIS, Central Laboratory (CL)
| None
| IS 14276 (2016) |
Cement bonded particle boards - Specification (First Revision) |
- |
11797 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6 (Finish) |
- |
|
|
|
| 7 (Dimensions and Tolerances) |
- |
|
|
|
| 8.5 (Workability) |
- |
|
|
|
| 10.3, Table-1 (Test for Density) |
- |
|
|
|
| 10.5, Table-1 (Test for Water Absorption) |
- |
|
|
|
| 10.6, Table-1 (Test for swelling in water) |
- |
|
|
|
| 10.7, Table-1 (Test for modulus of Rupture) |
- |
|
|
|
| 10.8, Table-1 (Test for modulus of Elasticity) |
- |
|
|
|
| 10.9, Table-1 (Test for tensile strength perpendicular to Surface) |
- |
|
|
|
| 10.1, Table-1 (Test for Screw Withdrawal Strength) |
- |
|
|
|
| Clause 8.2 Table 1 (Moisture content) |
- |
|
|
|
|
- |
-
"Test facility not available for 10.8 Tensile Strength Perpendicular to Surface
After Ageing, 10.10 -Abrasion Resistance, 10.11 - Resistance to Steam, 10.14 - Resistance to Stain
,; "
Sample Test Parameter not available in CL: 10.5 Test for Water Absorption, 10.6 Test for Swelling in Water, 10.7 Test for Modulus of Rupture(Wet),10.8 Test for Modulus of Elasticity (Wet), 10.9Test for Tensile Strength Perpendicular to Surface (accelerated ageing test),"
SIZE: 2 Boards Of Full Size
Sample Size without dimensional measurements: Length-1200 mm, width-1200 |
| 14689 |
BIS, Northern Regional Laboratory (NRL)
| None
| IS 733 (1983) |
Specification for wrought aluminium and aluminium alloy bars, rods and sections (For General Engineering Purposes) (Third Revision) |
- |
Please see remarks View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl. 5.1, Table 2 (Tensile Strength- IS 1816) |
- |
|
|
|
| Cl. 5.1, Table 2 (Elongation on 50 mm or 5.65√So Gauge Length) |
- |
|
|
|
|
- |
-
0.2% proof stress, Facility for chemical testing is not available |
| 14690 |
BIS, Central Laboratory (CL)
| None
| IS 2645 (2003) |
Integral waterproofing compounds for cement mortar and concrete - Specification (Second Revision) |
- |
Rs.12770.00 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 3.3 (Compressive Strength, At 3days & 7 days) |
- |
|
|
|
| Cl 3.2 (Initial & Final) |
- |
|
|
|
| Clause 3.4 (Chloride content) |
- |
|
|
|
| Cl 3.1 (The permeability of water in specimen Prepared with WPC shall be less than half the permeability of plain cement specimens. (i.e ; < 50 percent)) |
- |
|
|
|
| Clause 3.1
(Permeability to water of cement mortar with Water proofing compound) |
- |
|
|
|
|
- |
-
complete |
| 14691 |
BIS, Central Laboratory (CL)
| None
| IS 13785 (1993) |
Pesticide - Dodine WP - Specification |
- |
Rs.3350.00 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.2 (Description) |
- |
|
|
|
| 3.3 Table 1 i (Dodine content) |
- |
|
|
|
| 3.3 Table 1 ii (Sieving requirements material passing through 75 micron IS sieve) |
- |
|
|
|
| 3.3 Table 1 iv (Acidity/Alkalinity) |
- |
|
|
|
| 3.3 Table 1 v (Wettability) |
- |
|
|
|
|
- |
-
- |
| 14692 |
BIS, Central Laboratory (CL)
| None
| IS 13692 (1993) |
Metalaxyl mancqzeb WP - Specification |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.2 (Description) |
- |
|
|
|
| 3.3 Table 1 i (Metalaxyl content,) |
- |
|
|
|
| 3.3 Table 1 iii (Sieving requirements material passing through 75 micron IS sieve) |
- |
|
|
|
| 3.3 Table 1 v (Wettability) |
- |
|
|
|
|
- |
-
excluding Table1 Cl. 3.3, Sl. No. 2 Metalaxyl Content; |
| 14693 |
BIS, Central Laboratory (CL)
| None
| IS 15965 (2012) |
Pre - Painted aluminium zinc alloy metallic coated steel strip and sheet (Plain) |
- |
Rs 2850/ View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 7 (Workmanship) |
- |
|
|
|
| Cl 8.3.1 (Adhesion ) |
- |
|
|
|
| Cl 9.1 (Workmanship) |
- |
|
|
|
| Cl 11 (Length, Width & Thickness) |
- |
|
|
|
| Cl 12 (Camber, Deviation From Squareness (Out-of- Square) & Deviation From Flatness) |
- |
|
|
|
| Cl 12 (Weight) |
- |
|
|
|
| 4, 5 (CARBON) |
- |
|
|
|
| 4, 5 (SULPHUR) |
- |
|
|
|
| 4, 5 (PHOSPHURS) |
- |
|
|
|
| 4, 5 (MANGANESE) |
- |
|
|
|
| 4, 5 (SILICON) |
- |
|
|
|
| 4, 5 (ALUMINIUM) |
- |
|
|
|
| 4, 5 (NITROGEN) |
- |
|
|
|
|
- |
-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm;
excluding Except Coating; i)Solvent resistance test (As per annex C) ii)Dry film thickness(As per ISO 2808 -method 5B iii)Corrosion resistance(As per IS 9844) iv)Humudity Resistance (IS 101(Part 6/sec1)) |
| 14694 |
BIS, Eastern Regional Laboratory (ERL)
| None
| IS 3748 (2022) |
Tool Steels - Specification |
All |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7.4 (Shape, dimensions and tolerances) |
- |
|
|
|
| 7.2 (Chromium) |
- |
|
|
|
| 7.2 (Molybdenum) |
- |
|
|
|
| 7.2 (Vanadium) |
- |
|
|
|
| 7.2 (Tungsten) |
- |
|
|
|
| 7.2 (Nickel) |
- |
|
|
|
| 7.2 (Cobalt) |
- |
|
|
|
| 7.2 (Carbon) |
- |
|
|
|
| 7.2 (Silicon) |
- |
|
|
|
| 7.2 (Manganese) |
- |
|
|
|
| 7.2 (Phosphorus) |
- |
|
|
|
| 7.2 (Sulphur) |
- |
|
|
|
| Annex B.7 (Non-Destructive Test) |
- |
|
|
|
|
- |
-
Mech: NDT (Additional test) can be carried out for ultrasonic test only. Grade and heat treatment condition to be declared |
| 14695 |
BIS, Central Laboratory (CL)
| None
| IS 8042 (2015) |
White portland cement - Specification (Third Revision) |
- |
Rs 12050/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6 -Table 2- i (Fineness 4031 Part 2) |
- |
|
|
|
| 6 -Table 2- ii- a (Expansion by Le Chatelier- 4031 Part 3) |
- |
|
|
|
| 6 -Table 2- ii- b (Expansion by Autoclave- 4031 Part 3) |
- |
|
|
|
| 6 -Table 2- iii- a (Setting Time Initial- 4031 Part 5) |
- |
|
|
|
| 6 -Table 2-iii- b (Setting Time Final- 4031 Part 5) |
- |
|
|
|
| 6 -Table 2- iv- a (Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6) |
- |
|
|
|
| 6 -Table 2- iv- b (Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6) |
- |
|
|
|
| 6 -Table 2- iv- c (Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6) |
- |
|
|
|
| 6 -Table 2- vi (Degree of whiteness-Annex B) |
- |
|
|
|
| 5 - Table - 1 i (Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985) |
- |
|
|
|
| 5 - Table - 1 iii (Insoluble residue - Cl 4.10 of IS 4032:1985) |
- |
|
|
|
| 5 - Table - 1 ii (Iron oxide - Cl 4.5 of IS 4032:1985) |
- |
|
|
|
| 5 - Table - 1 iv (Magnesia - Cl 4.8 of IS 4032:1985) |
- |
|
|
|
| 5 - Table - 1 v (Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985) |
- |
|
|
|
| 5 - Table - 1 vi (Loss on ignition - Cl 4.2 of IS 4032:1985) |
- |
|
|
|
| 5 - Table - 1 vii (Chloride content - Cl 4.13 of IS 4032:1985) |
- |
|
|
|
| Clause 6
Table 2, SI No. (v)
(Compressive strength of Transverse Specimen, 672 ± 4 h) |
- |
|
|
|
|
- |
-
Complete for chemical.; |
| 14696 |
BIS, Central Laboratory (CL)
| None
| IS 15961 (2012) |
Hot dip aluminium - Zinc alloy metallic coated steel strip and sheet (Plain) |
- |
Rs.4990 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 8 (UTM) |
- |
|
|
|
| Cl 9 & Table 2 (Workmanship) |
- |
|
|
|
| Cl 10 (Coating Adhesion ) |
- |
|
|
|
| Cl 11 (Workmanship) |
- |
|
|
|
| Cl 12 (Weight) |
- |
|
|
|
| Cl 13 (Length, Width, Thickness, Camber, Deviation From Squareness & Deviation From Flatness) |
- |
|
|
|
| 4, 5 (CARBON) |
- |
|
|
|
| 4, 5 (SULPHUR) |
- |
|
|
|
| 4, 5 (PHOSPHURS) |
- |
|
|
|
| 4.5 (MANGANESE) |
- |
|
|
|
| 4, 5 (SILICON) |
- |
|
|
|
| 4, 5 (ALUMINIUM) |
- |
|
|
|
| 4, 5 (NITROGEN) |
- |
|
|
|
|
- |
-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm;
excluding Except Coating; i) Coating Test for single surface(Cl 9) |
| 14697 |
BIS, Central Laboratory (CL)
| None
| IS 13457 (1992) |
Pesticide - Deltamethrin WP specification |
- |
Rs.5000.00 (including cost of CRM). View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.2 (Description) |
- |
|
|
|
| Cl. 3.3&3.3.1 Table 1 (Deltamethrin content, ) |
- |
|
|
|
| Cl. 3.3 Table 1 (Sieving (material passing through 45 Micron IS Sieve),) |
- |
|
|
|
| Cl. 3.3 Table 1 (Suspensibility, ) |
- |
|
|
|
| Cl. 3.3 Table 1 (Acidity (as H2SO4), or Alkalinity (as NaOH)) |
- |
|
|
|
| Cl. 3.3 Table 1 (Wettability ) |
- |
|
|
|
|
- |
-
- |
| 14698 |
BIS, Eastern Regional Laboratory (ERL)
| None
| IS 9295 (1983) |
Specification for steel tubes for idlers for belt conveyors (First Revision) |
- |
Rs 5100/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 8.1.1 Table 1 (Tensile Strength- IS 1608(1)) |
- |
|
|
|
| 8.1.1 Table 1 (Yield Strength- IS 1608) |
- |
|
|
|
| 8.1.1 Table 1 (Elongation Percent- IS 1608) |
- |
|
|
|
| 8.2 (Drift Expansion Test- IS 2335) |
- |
|
|
|
| 8.3 (Flattening Test- IS 2328) |
- |
|
|
|
| 9.1 Table 2 (Outside Diameter) |
- |
|
|
|
| 9.1 Table 2 (Thickness) |
- |
|
|
|
| 9.1 Table 2 (Mass) |
- |
|
|
|
| 13.1.1 (Ovality) |
- |
|
|
|
| 13.1.2 (Eccentricity) |
- |
|
|
|
| 15.1 (Straightness) |
- |
|
|
|
| 16.1 (Length) |
- |
|
|
|
| 17.1 (Surface Protection) |
- |
|
|
|
| 7.1 (Sulphur- Relevant Parts of IS 228 or any other established instrumental/chemical method) |
- |
|
|
|
| 7.1 (Phosphorous- Relevant Parts of IS 228 or any other established instrumental/chemical method) |
- |
|
|
|
| 6.2 (Fin height) |
- |
|
|
|
| 14.0 (Workmanship) |
- |
|
|
|
|
- |
-
- |
| 14699 |
BIS, Bengaluru Branch Laboratory (BNBL)
| None
| IS 3466 (1988) |
Specification For Masonry Cement |
- |
Please see remarks. View breakup
Rs. 7350/- excluding chemical tests.
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4 ( water soluble alkali content - Cl 9 of IS 4032:1985) |
- |
|
|
|
| 4.1 (STAINING
IS 4032:1985) |
- |
|
|
|
| 4.1 (STAINING
IS 4032:1985) |
- |
|
|
|
|
- |
-
Only Chemical testing facility available. |
| 14700 |
BIS, Central Laboratory (CL)
| None
| IS 996 (2009) |
Single phase a.c. induction motors for general purpose (Third Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 16.1 (Marking and Diagram of connenctions) |
- |
|
|
|
| 16.1 (Marking and Diagram of connenctions) |
- |
|
|
|
| 16.1 (Marking and Diagram of connenctions) |
- |
|
|
|
| 16.1 (Marking and Diagram of connenctions) |
- |
|
|
|
| 16.1 (Marking and Diagram of connenctions) |
- |
|
|
|
| 16.1 (Marking and Diagram of connenctions) |
- |
|
|
|
| 16.1 (Marking and Diagram of connenctions) |
- |
|
|
|
| 16.1 (Marking and Diagram of connenctions) |
- |
|
|
|
| 16.1 (Marking and Diagram of connenctions) |
- |
|
|
|
| 16.1 (Marking and Diagram of connenctions) |
- |
|
|
|
| 16.1 (Marking and Diagram of connenctions) |
- |
|
|
|
| 16.1 (Marking and Diagram of connenctions) |
- |
|
|
|
| 16.1 (Marking and Diagram of connenctions) |
- |
|
|
|
| 16.1 (Marking and Diagram of connenctions) |
- |
|
|
|
| 16.1 (Marking and Diagram of connenctions) |
- |
|
|
|
| 16.1 (Marking and Diagram of connenctions) |
- |
|
|
|
| 10 (Type of enclosures) |
- |
|
|
|
| 11 (Methods of cooling) |
- |
|
|
|
| 9 (General construction (as per Cl. 9 & F-3)) |
- |
|
|
|
| 9.1 (General construction (as per Cl. 9 & F-3)) |
- |
|
|
|
| 9.4.11 (General construction (as per Cl. 9 & F-3)) |
- |
|
|
|
| 9 (General construction (as per Cl. 9 & F-3)) |
- |
|
|
|
| 9.4.13 (General construction (as per Cl. 9 & F-3)) |
- |
|
|
|
| 4.1 (Rated Voltage) |
- |
|
|
|
| 4.2 (Rated Frequency) |
- |
|
|
|
| 4.3 (Rated Output) |
- |
|
|
|
| 4.4 (Rated Speed) |
- |
|
|
|
| 7 (Dimensions (Cl.App.F-4)) |
- |
|
|
|
| 9.5 (Earthing) |
- |
|
|
|
| 9.5 (Earthing) |
- |
|
|
|
| 9.5 (Earthing) |
- |
|
|
|
| 17.3 (a) (No load test at rated voltage and frequency ) |
- |
|
|
|
| 17.3 (a) (No load test at rated voltage and frequency) |
- |
|
|
|
| 17.3 (a) (No load test at rated voltage and frequency) |
- |
|
|
|
| 12.1.1 (Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 )) |
- |
|
|
|
| 12.1.1 (Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 )) |
- |
|
|
|
| 12.1.1 (Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 )) |
- |
|
|
|
| 12.1.1 (Test for Breakaway starting current at rated voltage and frequency (Cl.12.1.1 & Cl. 12.5)) |
- |
|
|
|
| 12.5.1 (Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 )) |
- |
|
|
|
| 12.5.1 (Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 )) |
- |
|
|
|
| 12.5.1 (Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 )) |
- |
|
|
|
| 12.5.1 (Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 )) |
- |
|
|
|
| 12.5.1 (Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 )) |
- |
|
|
|
| 12.5.1 (Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 )) |
- |
|
|
|
| 12.2 (Temperature-rise test (Cl.12.2 & Cl.F-6.2.5)) |
- |
|
|
|
| 12.2 (Temperature-rise test (Cl.12.2 & Cl.F-6.2.5)) |
- |
|
|
|
| 12.2 (Temperature-rise test (Cl.12.2 & Cl.F-6.2.5)) |
- |
|
|
|
| 12.7 (Insulation resistance test) |
- |
|
|
|
| 13.1 (High voltage test) |
- |
|
|
|
| 13.2 (Moisture proofness) |
- |
|
|
|
| 13.2 (Moisture proofness) |
- |
|
|
|
| 13.3 (Leakage current test) |
- |
|
|
|
| 15.1 (ADDITIONAL TESTS (For ECO - MARK)) |
- |
|
|
|
| 15.2 (Specific Requirements) |
- |
|
|
|
| 16.1 (Marking and Diagram of connenctions) |
- |
|
|
|
| 16.1 (Marking and Diagram of connenctions) |
- |
|
|
|
| 16.1 (Marking and Diagram of connenctions) |
- |
|
|
|
| 16.1 (Marking and Diagram of connenctions) |
- |
|
|
|
| 16.1 (Marking and Diagram of connenctions) |
- |
|
|
|
| 9.4.11 (General construction (as per Cl. 9 & F-3)) |
- |
|
|
|
| 12.6 (Vibration Severity) |
- |
|
|
|
|
- |
-
Complete upto 180 Watt except Foot & Flange Mounted; |
