BIS - LIMS (Laboratory Information Management System)

BIS, Central Laboratory (CL)

20/9, Site 4, Sahibabad Industrial Area, Sahibabad, Ghaziabad, Ghaziabad, Uttar Pradesh, 201010

- sample@bis.gov.in

Scope List

Reset

979 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

301

IS 15298 : part 4 (2017)

Personal protective equipment: Part 4 occupational footwear (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Table 1 (CLASS I)	-
Table 1 (CLASS II)	-
5.2.2.1 (General)	-
5.2.2.2 (Height of upper)	-
5.2.2.3 (Seat region)	-
5.3.2.1 (Construction)	-
5.3.1.2 (Upper/outsole bond strength)	-
5.3.2.2 (Leakproofness)	-
5.3.2.3 (Specific ergonomic features )	-
5.3.4.1 (Slip resistance)	-
5.3.4.2 (Slip resistance on ceramic tile floor with sodium lauryl sulphate (SLS) solution)	-
5.3.4.3 (Slip resistance on steel floor with glycerine )	-
5.3.4.4 (Slip resistance on ceramic tile floor with SLS and on steel floor with glycerine )	-
5.4.2.1 (Upper)	-
5.4.2.2 (Thickness )	-
5.4.2.3 (Tear strenth)	-
5.4.2.4 (Tensile properties)	-
5.4.2.5 (Flexing resistance )	-
5.4.2.6 (Water vapour permeability and coefficient )	-
5.5.2.1 (Tear strength )	-
5.5.2.2 (Abrasion resistance )	-
5.5.2.3 (Water vapour permeability and coefficient )	-
5.6 (Tongue )	-
5.6.2.1 (Tear strength )	-
5.7.2.1 (Insole and insock )	-
5.7.2.3 (Water absorption and desorption )	-
5.7.4.1 (Abrasion resistance )	-
5.7.4.2 (Abrasion resistance )	-
5.8.2.1 (Outsole)	-
5.8.1.1 (Thickness )	-
5.8.1.2 (Cleated area )	-
5.8.1.3 (Cleat height)	-
5.8.2.2 (Tear strength )	-
5.8.2.3 (Abrasion resistance )	-
5.8.2.4 (Flexing resistance )	-
5.8.2.6 (Interlayer bond strength )	-
6.2.2.1 (Conductive footwear)	-
6.2.2.2 (Antistatic footwear)	-
6.2.3.1 (Heat insulation of sole complex )	-
6.2.3.2 (Cold insulation of sole complex)	-
6.2.2.4 (Energy absorption of seat region )	-
6.2.2.5 (Water resistance )	-
6.3.2.2 (Upper- water penetration)	-
6.4.2.1 (Resistance to hot contact)	-

-
Excluding Chemical requirement as per IS 17011 (Innocuousness ) Mechanical (Complete) except ; Hydrolysis (Cl 5.4.8 & 5.8.5) Raw material requirements :4 pair for complete testing along with raw material with specified requirement as per ISs and For abrasion resistance to outsole raw material of 10 mm min. thickness required

302

IS 15298 : Part 3 (2019)

Personal protective equipment: Part 3 protective footwear (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.2.2 Table-2 (Height of upper)	-
5.2.3 Table-2 (Seat Region)	-
5.3.1.1 Table-2 (Construction)	-
5.3.1.2 Table-2 (Upper/Outsole Bond)	-
Table-2 (Strength)	-
5.3.2.1 Table-2 (General)	-
5.3.2.2 Table-2 (Internal Length of toe cap)	-
5.3.2.3 Table-2 (Impact Resistance -T- )	-
5.3.2.4 Table-2 (Compression)	-
5.3.2.5 Table-2 (Behaviour of toe cap)	-
5.3.3 Table-2 (Leak Proofness)	-
5.3.4 Table-2 (Specific Ergonomic)	-
Table-2 (Features)	-
5.3.5.2 Table-2 (Slip Resistance SRA)	-
5.3.5.3 Table-2 (Slip Resistance SRB)	-
5.3.5.4 Table-2 (Slip Resistance SRC)	-
5.4.1 Table-2 (General)	-
5.4.2 Table-2 (Thickness)	-
5 4 3 Table-2 (Tear Strength)	-
5.4.4 Table-2 (Tensile Properties)	-
5.4.5 Table-2 (Flexing Resistance)	-
5.4.6 Table-2 (Water Vapour Permeability & Coefficient)	-
5.5.1 Table-2 (Tear Strength)	-
5.5.2 Table-2 (Abrasion Resistance)	-
5.5.3 Table-2 (Water Vapour Permeability & Coefficient)	-
5.6.1 Table-2 (Tear Strength)	-
5.7.1 Table-3 (Thickness)	-
5.7.3 Table-3 (Water Absorption &)	-
5.7.4.1 Table-3 (Insole Abrasion)	-
5.7.4.2 Table-3 (Abrasion)	-
5.8.1 Table-2 (Design)	-
5.8.2 Table-2 (Tear Strength)	-
5.8.3 Table-3 (Abrasion Resistance)	-
5.8.4 Table-3 (Flexing Resistance)	-
5.8.6 Table-2 (Interlayer BondStrength)	-
6.2.2.1 Table-18 (Electrical Properties)	-
6.2.2.2 Table-18 (Antistatic Footwear)	-
6.2.3.1 Table-18 (Heat Insulated Comp)	-
6.2.3.2 Table-18 (Cold Insulated)	-
6.2.4 Table-18 (Energy Absorption of seat region)	-
6.2.5 Table-18 (Water Resistance)	-
6.2.7 Table-18 (Ankle Protection)	-
6.2.8 Table-18 (Cut Resistance)	-
6.3 Table-18 (Water Penetration & Absorption)	-
6.4.1 Table-18 (Resistance to Hot Contact)	-

-
Excluding Chemical requirement as per IS 17011 (Innocuousness ) Mechanical (Complete) except ; Hydrolysis (Cl 5.4.8 & 5.8.5) Raw material requirements : 4 pair for complete testing along with raw material with specified requirement as per ISs and For abrasion resistance to outsole raw material of 10 mm min. thickness required

303

IS 15298 : Part 2 (2016)

Personal protective equipment: Part 2 safety footwear (Second Revision)

2700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4,Table 1 (Class I, IS 15298)	-
4,Table 1 (Class II, IS 15298)	-
5.2,5.2.1, Fig 3 (Design,General, IS 15298)	-
5.2.2, Fig 4 (Height of Upper, ISO 20344 , 6.2)	-
5.2.3, Table 10 ,Design A (Seat Region)	-
5.3.1.1 (Construction)	-
5.3.1.2 (Upper/outer sole bond strength , ISO 20344 , 5.2)	-
5.3.2.1 (General, EN 12568 OF 4.2.2.2)	-
5.3.2.2,Table 5 (Internal length of toecaps , ISO 20344 , 5.3)	-
5.3.2.3,Table 6 (Impact resistance of safety footwear,ISO 20344 , 5.4)	-
5.3.2.4 ,Table 6 (Compression Resistance of safety footwear ,ISO20344 , 5.5)	-
5.3.2.5.1 (Corrosion resistance of metallic toecaps ,ISO20344 , 5.6.2)	-
5.3.2.5.2 (Non metallic toe caps ,EN 12568)	-
5.3.3 (Leak proofness ,ISO 20344 , 5.7)	-
5.3.4 (Specific ergonomic feature ,ISO 20344 , 5.1)	-
5.3.5.2,Table 7 (Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-
5.3.5.3,Table 8 (Slip resistance on steel floor with glycerin)	-
5.3.5.4 (Slip resistance on ceramic tile floor with NaLS and on steel floor with glycerin)	-
5.3.6 (Innocuousness)	-
5.4.1,Table 10 (General)	-
5.4.2, Table 11 (Thickness , ISO 20344 , 6.1 )	-
5.4.3, Table 12 (Tear Strength, ISO 20344 , 6.3 )	-
5.4.4, Table 13 (Tensile properties ,ISO 20344 , 6.4.1 )	-
5.4.5, Table 14 (Flexing resistance ,ISO 20344,6.5)	-
5.4.6 (Water vapour permeability and coefficient,ISO 20344,6.6 & 6.8)	-
5.5.1,Table 15 (Tear Strength, ISO 20344 , 6.3)	-
5.5.2 (Abrasion Resistance ;ISO 20344 , 6.12)	-
5.5.3 (Water vapour permeability and coefficient,ISO 20344,6.6 & 6.8)	-
5.6 (Tongue - IS 15298 Part 2 )	-
5.6.1,Table 16 (Tear Strength, ISO 20344 , 6.3)	-
5.7.1;Table 3 (Thickness ; ISO 20344,7.1)	-
5.7.3 (Water Absorption and desorption ISO 20344,7.2 )	-
5.7.4.1 (Insole ; ISO 20344,7.3 )	-
5.7.4.2 (Insocks ; ISO 20344, 6.12)	-
5.8.1 (Design, IS 15298 Part 2 )	-
5.8.1.1, Table 17 (Thickness ; ISO 20344, 8.1.2)	-
5.8.1.2 (Cleated area ; ISO 20344 , Fig 38)	-
5.8.1.3, Table 17 (Cleat height; ISO 20344, 8.1)	-
5.8.2 (Tear Strength, ISO 20344 , 8.2)	-
5.8.3 (Abrasion Resistance ;ISO 20344 , 8.3)	-
5.8.4 (Flexing resistance ,ISO 20344,8.4)	-
5.8.6 (Interlayer bond strength; ISO 20344, 5.2)	-
6.2.2.1 (Conductive footwear ; ISO 20344,5.10 & 5.10.3.3)	-
6.2.2.2 (Antistatic footwear ; ISO 20344,5.10)	-
6.2.3.1 (Hear insulation of sole complex; ISO 20344,5.12 ;Annex B)	-
6.2.3.2 (Cold insulation of sole complex; ISO 20344,5.13)	-
6.2.4 (Energy absorption of seat region; ISO 20344,5.14)	-
6.2.5 (Water resistance ; 5.15.1 & 5.15.2)	-
6.2.6.1 (Construction)	-
6.2.6.2 , Table 19 (Impact resistance of metatarsal protective device,ISO 20344 , 5.16)	-
6.3 (Upper--Water penetration and absorption ; ISO 20344 , 5.13)	-
6.4.1 (Resistance to hot contact ; ISO 20344 , 8.7)	-
5.6.2 (Ph Value ; ISO 20344,6.9)	-
5.3.6 (Innocuousness)	-

-
Excluding Chemical requirement as per IS 17011 (Innocuousness ) Mechanical (Complete) except ; Hydrolysis (Cl 5.4.8 & 5.8.5) Raw material Requirement : 4 pair for complete testing along with raw material with specified requirement as per ISs and For abrasion resistance to outsole raw material of 10 mm min. thickness required

304

IS 4684 (1975)

Specification for edible groundnut flour (Expeller Pressed) (First Revision)

Please see remarks. View breakup
For Chemical: Rs. 7329/- excluding Aflatoxin. For Microbiological: Rs. 6567/-.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2.5 Table 1 (Acid-insoluble ash)	-
2.5 Table 1 (Acid value of extracted fat)	-
2.5 Table 1 (Total ash)	-
2.5 Table 1 (Crude fibre (on dry basis))	-
2.5 Table 1 (Moisture)	-
2.5 Table 1 (Fat ( on dry basis))	-
2.5 Table 1 (Protein)	-
2.2 (Description)	-
2.6 Table 2 (Coliform bacterial count)	-
2.6 Table 2 (Total bacterial count)	-
2.6 Table 2 (Salmonella bacteria)	-

-
Excluding 1- Aflatoxin 2-Acid value of extracted fat

305

IS 9359 (1995)

Pesticide - Phorate G encapsulated - Specification

Rs 3880/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Constituents)	-
3.2.1 (Physical -Description)	-
3.2.2 (Physical - Sieving Requiremenr)	-
3.2.2.1 (ratio of lower to upper sieve sixes)	-
3.2.5 (Moisture Content)	-
3.3.1 (Phorate Content)	-
3.3.2 (Acidity)	-
3.2.4.2 (Encapsulation- The active ingredient in the water (%, by Mass))	-

-
-

306

IS 9356 (1980)

Specification for butachlor emulsifiable concentrates

Rs 3500/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2.2.3 (Flash Point)	-
2.2.2 (Cold Test)	-
2.2.4 (Emulsion Stability)	-
2.2.1 (Description)	-
2.3.2 (Acidity)	-
2.3.1 (Butachlor Content, NV upto 9)	-
2.3.1 (Butachlor Content, NV above 9 below 50)	-
2.3.1 (Butachlor Content, NV above 50)	-
2.1.1 (Constituents)	-
2.2.2 (Cold Test)	-

-
-

307

IS 899 (1971)

Specification for tapioca sago (Saboodana) (First Revision)

Rs.8600/ View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.5 Table 1 (Moisture)	-
3.5 Table 1 (Total ash)	-
3.5 Table 1 (Acid insoluble ash)	-
3.5 Table 1 (Starch)	-
3.5 Table 1 (Sulphur dioxide)	-
3.5 Table 1 (Crude fibre)	-
3.5 Table 1 (pH of aqueous extract)	-
3.1 (Description )	-
3.4 (Gelatinization)	-

-
500 gm x 3 Excluding 1-) Colour of gelatinized alkaline paste in the procelain cuvette on the Lovibond Scale 2) Hydrocyanic acid 3) Sulphur dioxide

308

IS 4467 (1996)

Caramel - Specification (Second Revision)

Please see remarks. View breakup
Type 1 Rs.6600.00 Type 2 Rs.7500.00 Type 3 Rs.9600.00 Type 4 Rs.9300.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1.2 Table 1 (Ammoniacal Nitrogen, Type 1 plain)	-
6.1.2 Table 1 (Ammoniacal Nitrogen, Type 2 Caustic sulphite)	-
6.1.2 Table 1 (Colour Intensity, Type 2 Caustic sulphite)	-
6.2.1 Table 2 (Total Nitrogen, Type 1 plain)	-
6.2.1 Table 2 (Mercury, all types)	-
6.1.2 Table 1 (Colour Intensity, Type 1 plain)	-
6.2.1 Table 2 (Sulphur dioxide, Type 2 Caustic sulphite)	-
6.2.1 Table 2 (Total Nitrogen, Type 2 Caustic sulphite)	-
6.2.1 Table 2 (Total Sulphur,Type 1 plain)	-
6.2.1 Table 2 (Total Sulphur, Type 3 ammonia process)	-
6.1.2 Table 1 (Colour Intensity, Type 3 ammonia process)	-
6.1.2 Table 1 (Ammoniacal Nitrogen, Type 3 ammonia process)	-
6.1.2 Table 1 (Ammoniacal Nitrogen, Type 4 sulphite ammonia)	-
6.2.1 Table 2 (Sulphur dioxide, Type 4 sulphite ammonia)	-
6.1.2 Table 1 (Colour Intensity, Type 4 sulphite ammonia)	-
6.2.1 Table 2 (Total Sulphur, Type 2 Caustic sulphite)	-
6.1.2 Table 1 (Arsenic, all types)	-
6.1.2 Table 1 (Lead ( as Pb), all types)	-
6.2.1 Table 2 (Total Nitrogen, Type 3 ammonia process)	-
6.2.1 Table 2 (Total Nitrogen, Type 4 sulphite ammonia)	-
6.2.1 Table 2 (Total Sulphur, Type 4 sulphite ammonia)	-
6.2.1 Table 2 (Copper,all types)	-
6.2.1 Table 2 (Heavy Metals, all types)	-
6.1.2 Table 1 (solid Content, Type 2 Caustic sulphite)	-
6.1.2 Table 1 (solid Content, Type 4 sulphite ammonia)	-
6.1.2 Table 1 (solid Content, Type 1 plain)	-
6.1.2 Table 1 (solid Content, Type 3 ammonia process)	-
6.1.2 Table 1 (4-Methylimidazole, Type 4 sulphite ammonia)	-
6.1.2 Table 1 (4-Methylimidazole, Type 3 ammonia process)	-
6.1.1 (Description)	-
6.3 (Calclulation on Solid Basis)	-

-
500 gm x 3 Excluding Solid content,Sulphur dioxide,2 Acetyl 4 tetrahydroxy,Mercury,Copper,Colour intensity,4 Methylimidazole Lead.

309

IS 8707 (2013)

Mancozeb, technical - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.3 Table 1 (Mancozeb content)	-

-
Excluding Cl 3.3.2 & Cl 3.3.3 Zinc & Manganese Content;

310

IS 8291 (1976)

Specification for phenthoate emulsifiable concentrates

Rs.2450.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2.2.1 (Description)	-
2.2.2 (Cold Test)	-
2.2.3 (Flash Point)	-
2.2.4 (Emulsion Stability)	-
2.3.1 (Phenthoate Content)	-
2.3.2 (Acidity/Alkalinity)	-

-
Excluding Cl 2.3.1 Content

311

IS 8028 (1987)

Specification for quinalphos Be (First Revision)

Rs 2450.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2.2.1 (Description)	-
2.2.2 (Cold Test)	-
2.3.2 (Acidity/Alkalinity)	-
2.2.4 (Emulsion Stability)	-

-
-

312

IS 5672 (1992)

Mineral mtxtures for supplementing poultry feeds - Specification (First Revision)

9700 View breakup
Rs.9700/- excl. spores of bacillus anthracs and clostridium S.P Sporec

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.4 Table 1 (Moisture, percent by mass,)	-
3.4 Table 1 (Acid insoluble ash)	-
3.4 Table 1 (Iodine ( as KI ))	-
3.4 Table 1 (Manganese)	-
3.4 Table 1 (Zinc)	-
3.4 Table 1 (Phosphorus,)	-
3.4 Table 1 (Calcium,)	-
3.4 Table 1 (Copper,)	-
3.4 Table 1 (Iron)	-
3.2 (Descrption)	-

-
Elements where digestion methods for ICP are given, need to be technically verified and iodine methode is technically not achieved. Excluding cl. 3.4 and 6.1 v) iodine

313

IS 3309 (1992)

Soluble Coffee - Chicory powder - Specification (Second Revision)

Rs.2900/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.4 Table 1 (Moisture content)	-
3.4 Table 1 (Total ash)	-
3.7 (Copper content)	-
3.1 (Description)	-
3.4 Table 1 (Solubility in boiling)	-
3.4 Table 1 (Solubility in cold water)	-

-
500 gm x 3 Excluding copper content, Caffeine content

314

IS 6014 (1978)

Specification for emulsifiable larvicidal oil, pyrethrum based (First Revision)

Rs. 6454/- excluding Larvicidal efficacy (optional). View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2.2.2 (Flash Point (Abel))	-
2.2.3 (Emulsion Stability)	-
2.2.4 (Relative Density)	-

-
Excluding Cl. 2.2.1.2 & Cl. 2.3.1 Identity test & Total Pyrethrin Content

315

IS 2791 (1992)

Soluble coffee powder - Specification (Third Revision)

4126 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.4 Table 1 (Moisture content)	-
3.4 Table 1 (Total ash)	-
3.4 Table 1 (Solubility in boiling)	-
3.1 (Description )	-
Clause no 3.52.3 (freedom from adulterants)	-
Clause no 3.5.2.2 (freedom from extraneous matter)	-

-
500 gm x 3

316

IS 2785 (1979)

Specification for natural cheese (Hard Variety), processed cheese, processed cheese spread and soft cheese (First Revision)

Rs 3000/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.3.1 (Appearance)	-
3.3.2 (Odour and Flavour)	-
3.3.3 (Texture and Consistency)	-
3.3.4- Table 1-i (Moisture- Annex A)	-
3.3.4- Table 1-ii (Milk fat ( on dry basis)- Annex B)	-
3.3.4- Table 1-iii (Salt ( added sodium chloride)- Annex C)	-

-
500 gm x 3

317

IS 1697 (1994)

Erythrosine, food grade - Specification (Second Revision)

Rs.- 12150/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1-Table 1- i (Total dye content, corrected for sample dried at 105 ± I°C for 2 h)	-
3.1-Table 1- iii (Water-insoluble matter)	-
3.1-Table 1- iv (Ether extractable matter (alkaline))	-
3.1-Table 1-xii (Heavy Metals)	-

-
500 gm x 3 Excluding Table. 1 Cl. (2)(3)(4)(5) 2. Loss on drying at 135°C, percent by mass, and chlorides and sulphates expressed as sodium salt 5. Inorganic iodide 3.Subsidiarycolouring matter except fluorescein 6. Fluorescein 7.Organic compounds other than colouring material (a)Tri-iodoresorcinol,(b) 2(2,4- dihydroxy-3,5-iodobenzoyl)benzoic acid.

318

IS 5719 (2017)

Gelatin, food grade - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Description)	-
4.2.1 (Solubility)	-
4.2.2 (Precipitate formation)	-
4.2.3 (Development of turbidity)	-
Cl. 4.3 (Table 1, S. no i) (Loss on drying)	-
Cl. 4.3 (Table 1, S. no ii) (Gel strengt)	-
Cl. 4.3 (Table 1, S. no iii) (Total Ash)	-
Cl. 4.3 (Table 1, S. no iv) (Sulphur dioxide)	-
Cl. 4.3 (Table 1, S. no v) (Nitrogen)	-
Cl. 4.3 (Table 1, S. no vi) (Lead)	-
Cl. 5.7(Table 1, S. no vii) (Arsenic)	-
Cl. 5.7 (Table 1, S. no viii) (Mercury)	-
Cl. 5.7 (Table 1, S. no ix) (Cadmium)	-
Cl. 5.7 (Table 1, S. no x) (Chromium)	-
Cl. 5.7 (Table 1, S. no xi) (Heavy Metals)	-
Cl. 4.5 (Microbiological Requirements)	-

-
-

319

IS 1838 : Part 1 (1983)

preformed fillers for expansion joint in concrete pavement and structures (non extruding and resilient type): Part 1 Bitumen impregnated fibre - Specification

12600 View breakup
Rs. 12600/- + testing charges as per referred ISS (excluding Resistance to handling, Recovery, Compression, Extrusion, Bitumen content, Penetration of recovered bitumen).

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (Dimensions and tolerances)	-
5 Table-1 vi (Test for Density in accordance with IS 10566:1983 )	-
5 Table-1 viii (Weathering test in accordance with IS 10566:1983)	-

-
Excluding Test facility not avaialble for Cl. 5 Table -1, Recovery, Compression, Water Absorption,Penetration of recovered Bitumen, Extrusion

320

IS 9537 : Part 4 (1983)

Specification for conduits for electrical installations: Part 4 pliable self - Recovering conduits of insulating materials

4200/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 (Marking, IS 9537-4)	-
6.1 (Marking, IS 9537-4)	-
6.1 (Marking, IS 9537-4)	-
6.1 (Marking, IS 9537-4)	-
6.2 (Marking, IS 9537-4)	-
6.2.1 (Marking, IS 9537-4)	-
6.3 (Marking, Cl. 6.4 of IS 9537-1)	-
6.4 (Marking, IS 9537-4)	-
7.1 (Dimensions (Maximum outside Diameter), IS 9537-4)	-
7.3.3 (Uniformity of wall thickness, IS 9537-4)	-
8.1 (Construction, Cl. 8 of IS 9537-1)	-
9.3 (Mechanical Properties (Compression Test), IS 9537-4)	-
9.4 (Mechanical Properties (Impact Test), Cl. 9.4 of IS 9537-1)	-
11 (Resistance to burning, Cl. 11 of IS 9537-1)	-
12 (Electrical Strength, Cl. 12.1.1 of IS 9537-1)	-
12 (Insulation Resistance, Cl. 12.1.2 of IS 9537-1)	-

-
-

321

IS 15559 (2004)

Polyester strapping - Specification

Rs.2730.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Manufacture)	-
4.1 (Manufacture)	-
4.2 (Surface finish)	-
4.3 (Colour)	-
4.5 (Freedom from Defects)	-
4.6, Table-1 (Dimensions and Physical Properties)	-
5.2 (Split Resistance)	-
5.3, Table-3 (Camber)	-
Table-1 (4) (Type)	-
Table-2 (4) (Type)	-

-
Excluding Test facility not available for 5.1 Tensile Strength and Elongation, 5.2 Split Resistance, 5.3 Camber

322

IS 14928 (2001)

Textiles - Composite synthetic fibre ropes - Specification

Rs.2400.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.2.1 (Construction)	-
5.2.2 (Construction)	-
5.2.3 (Construction)	-
5.3 (Structure)	-
5.4 (Treatment)	-
5.5 ( Rope)	-
6.1, Table 1 /Table 2. ( Breaking Strength, Min)	-
6.2, Table 1 and Table 2 ( Mass of the Coil)	-
6.3 ( Length of Coil)	-
8.1 (a) (MARKING)	-
8.1 (b) (MARKING)	-
8.1 (c) (MARKING)	-
8.1 (d) (MARKING)	-
8.1 (e) (MARKING)	-

-
-

323

IS 5135 : Part 1 (1994)

Specification for hand - Rotary duster: Part 1 belly - Mounted type (Second Revision)

Testing charges for the product are Rs 7600/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.0 (Capacity)	-
7.4 (Leakage)	-
8.0 (WORKMANSHIP AND FINISH)	-

-
-

324

IS 1422 (1983)

Specification for cotton duck (third revision)

Hence complete testing charges for the product are Rs.3 View breakup
Hence complete testing charges for the product are Rs.3900.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 4.2, Table 2, Sr. No. 1 (Scouring loss, Scoured or Dyed)	-
Cl 4.2, Table 2, Sr. No. 1 (Scouring loss, Grey)	-
Cl 4.2, Table 2, Sr. No. 2 (pH value )	-

-
-

325

IS 2923 (1995)

Carmoisine, food grade - Specification (Second Revision)

Rs 6835/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 Table 1 (Water-insoluble matter)	-
3.1 Table 1 (Combined ether extracts)	-
3.1 Table 1 (Arsenic)	-
3.1 Table 1 (Lead)	-
3.1 Table 1 (Loss on drying at 135 C)	-
3.1 Table 1 (Heavy metals)	-
3.1 Table 1 (Total dye content,)	-

-
500 gm x 3 Excuding Table .1 Cl.3.1 (2)(4)(5)(6) 2. Loss on drying at 135°C, percent by mass, and chlorides and sulphates expressed as sodium salt 5. Subsidiary Dyes 6. Dye intermediates

326

IS 2415 (2015)

Cycle - Rubber tubes (Moulded/ Jointed) - Specification (Fourth Revision)

Rs 14270/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1, Table 1 (Classification and Designation)	-
5.1,3.4, Annex A & Table 2. ( Flat Length )	-
5.1,3.5, Annex A & Table 2. (Flat Width)	-
5.2, Annex A (Thickness)	-
5.2.1 (Uniformity of Thickness)	-
6.1,Table 3 (i)Tensile strength:)	-
6.1,Table 3 (ii)Elongation at break )	-
6.2 (iii)Tension set: )	-
6.3 (a) ( Ageing Test:- Tensile strength :)	-
6.3(b) ( Ageing Test :- Elongation at break)	-
6.4.1 (Joint Adhesion Strength)	-
6.4.3 ( Strength of splice on moulded tube)	-
6.5 (Leak Test)	-
6.6 (Valve Test)	-
6.7.1 (Manufacture and Workmanship)	-
6.7.2 (Manufacture and Workmanship)	-
6.7.3 (Manufacture and Workmanship)	-
6.7.4 (Manufacture and Workmanship)	-
7.1 (MARKING)	-

-
Excluding Valve test

327

IS 12866 (1989)

Plastic translucent sheets made from thermo - Setting polyester resin (Glassfibre Reinforced) - Specification

1758 View breakup
Rs. 1758/- (only for Acid number, Visual tests and Glass content) + testing charges as per referred ISS.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 6.3 (Water Absorption)	-
4-4.1-Table 1 ( PROFILES, DIMENSIONS AND TOLERANCES-Profiles)	-
4-4.2-Table 1 ( PROFILES, DIMENSIONS AND TOLERANCES-Profiles - Depth of Corrugation, D )	-
4-4.2-Table 1 ( PROFILES, DIMENSIONS AND TOLERANCES-Profiles - Pitch of Corrugation, P )	-
4-4.2-Table 1 ( PROFILES, DIMENSIONS AND TOLERANCES-Profiles - Overall Width, B)	-
4-4.2-Table 1 ( PROFILES, DIMENSIONS AND TOLERANCES-Profiles - Effective Width)	-
4-4.2-Table 1 ( PROFILES, DIMENSIONS AND TOLERANCES-Profiles - Minimum Thickness, T)	-
4-4.2-Table 1 ( PROFILES, DIMENSIONS AND TOLERANCES-Profiles - Length of Sheet, A)	-
5-5.1 (WOIRKMANSHlP AND FlNISH)	-
5-5.2 (WOIRKMANSHlP AND FlNISH)	-
6-6.1 (PERFORMANCE REQUIREMENTS-Density- The nominal weight of 1.10 + 0·15 mm Thick plain sheet shall be 1.85 kg/sq. m)	-
6-6.5-Annex D (PERFORMANCE REQUIREMENTS-Bolt Shear Test -When tested in accordance with Annex D, the arithmetic mean of the loads at which the first tear appears, shall be not less than 375 N. The load at which the first tear appears while testing any one of the specimens, shall be not less than 250 N. )	-
6-6.6- Table 2-Annex E (PERFORMANCE REQUIREMENTS-Load Deflection Test-Applicable only to corrugated sheets and flats of curved sheets. Toal Load N )	-

-
-

328

IS 5382 (2018)

Rubber seals - Joint rings for water supply, drainage and sewerage pipelines - Specification for materials (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.2.1 (Dimensional tolerances)	-
4.2.2 (Imperfections and defects)	-
4.2.2 (Surface imperfections)	-
4.2.2 (i)In zones involved in sealing function)	-
4.2.2 (ii) In zones not involved in sealing function)	-
4.2.2 (Internal Imperfections)	-
4.2.3 (Hardness, IRHD from buttons )	-
4.2.4 (Tensile strength, MPa)	-
4.2.5 (Compression set in air)	-
4.2.5.2 (Compression set at 23 ºC for 72 h)	-
4.2.5.2 (Compression set at 70 ºC for 24 h)	-
4.2.5.3 (Low temp compression set at -10 ºC for 72 h)	-
4.2.6 (Ageing 7 days at 70 ºC)	-
4.2.6 (Hardness, IRHD from buttons Tensile strength, % Elongation at break , % )	-
4.2.8 (Volume change in water , max/min 7 days at 70 ºC )	-
4.2.10 (Spliced joint)	-

-
Excluding Stress relaxation in compression, Ozone resistance test, Low Temperature Performance at - 25 Degree C (Optional Test)

329

IS 3623 (1978)

Specification for guide and rubbing ropes (First Revision)

Please see remarks. View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Size - IS 3623)	-
3.2 (Length - IS 3623)	-
4.3 (Galvanized Test - IS 3623)	-
5, Table 1, Table 2 (Mass)	-
5, Table 1, Table 2 Annex B (Minimum Breaking Force - IS 16594 )	-
6.1-fig-1 (Construction)	-
6.2.1 (Construction)	-
7.1 (Workmanship)	-
7.2 (Joints)	-
3.1 (Size - IS 3623)	-
3.2 (Length - IS 3623)	-

-
-

330

IS 5487 (1992)

Metal polish, liquid - Specification (First Revision)

Rs.4800.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.8, Table-1 (vi) (Oleic acid content, IS 5487 )	-
4.8, Table-1 (v) (Flash point (Abel), IS 1448 Part-20)	-
4.8, Table-1 (iv) (Cyanides, IS 5487)	-
4.8, Table-1 (iii) (Residue on 75miron IS Sieve, IS 5487)	-
4.8, Table-1 (ii) (Total ammonia (as NH3), IS 5487)	-
4.8, Table-1 (i) (Total solids (excluding oils and fatty matter), IS 5487)	-
4.7 (Keeping Quality, IS 5487)	-
4.6 (Acidity of the Aqueous Extract, IS 5487)	-
4.5 (Polishing Property, IS 5487)	-
4.4 (Stability, IS 5487)	-
4.3 (Consistency, IS 5487 )	-
4.8, Table-1 (v) (Flash point (Abel), IS 1448 Part-20)	-
Clause No. 4.1 (Composition)	-
Clause No.4.2 (Odour)	-
Clause No.4.3 (Consistency)	-
Clause No.4.4 (Stability)	-
Clause No.4.5 (Polishing Property)	-
Clause No.4.6 (Acidity of the Aqueous Extract)	-
Clause No. 4.8, Table No. 1, SI. No.1 (Total solids ( excluding oils and fatty matter ))	-
Clause No. 4.8, Table No. 1, SI. No.2 (Total ammonia ( as NH3))	-
Clause No. 4.8, Table No. 1, SI. No.3 (Residue on 75miron IS Sieve)	-
4.8, Table-1 (iv) (Cyanides, IS 5487)	-
4.8, Table-1 (v) (Flash point (Abel), IS 1448 Part-20)	-
4.8, Table-1 (vi) (Oleic acid content, IS 5487 )	-

-
Excluding Cyanides

Bureau of Indian Standards

The National Standards Body of India

BIS, Central Laboratory (CL)

20/9, Site 4, Sahibabad Industrial Area, Sahibabad, Ghaziabad, Ghaziabad, Uttar Pradesh, 201010

- sample@bis.gov.in

Scope List