BIS - LIMS (Laboratory Information Management System)

IDMA LABORATORIES LIMITED

PLOT NO. 391 INDUSTRIAL AREA PHASE 1, PANCHKULA, Panchkula, Haryana, 134113

9888002607 testing@idmagroup.co.in

Scope List

Reset

460 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

301

IS 9355 (1980)

Specification for butachlor, technical

3325 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.1(Deseriptio)	-	300	NA
2.2 TABLE 1(Butachlor content, percent by mass min)	-	1225	NA
2.2 Table 1(Moisture content, percent by mass, max)	-	600	NA
2.2 TABLE 1(acidity (as H2SO4), percent by mass max)	-	600	NA
2.2 TABLE 1(Material insoluble in acetone, percent by mass, max)	-	600	NA

Complete

31 Dec, 2026

-
Included w.e.f 28.05.2019

302

IS 9356 (1980)

Specification for butachlor emulsifiable concentrates

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.2.1(Description)	-	500	NA
2.2.2(Cold Test)	-	600	NA
2.2.3(Flash Point)	-	800	NA
2.2.4(Emulsion Stability)	-	800	NA
2.3.2(Acidity)	-	800	NA
2.3.1(Butachlor Content, NV above 50)	-	1500	NA

Complete

31 Dec, 2026

-
Included w.e.f 28.05.2019

303

IS 9360 (1980)

Specification for carbofuran granules, bncapsulated

6400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.2.1(Description)	-	500	NA
2.2.2(Particle Size)	-	1200	Total testing charges for particle Size are Rs. 1200/- (Sieving through upper mesh size sieve is Rs. 500/- , Sieving through lower mesh size sieve Rs. 500/- and Ratio of Lower to upeer sieve size Rs. 200/-).
2.2.3(Dust)	-	600	NA
2.2.6(Moisture Content)	-	800	NA
2.3.2(Acidity)	-	700	NA
2.3.1(Carbofuran Content, NV upto 9)	-	1000	NA
2.2.4(Encapsulation)	-	800	NA
2.2.4(Encapsulation)	-	800	NA

Complete

31 Dec, 2026

-
Included w.e.f 28.05.2019

304

IS 4605 (2020)

Crepe Bandage - Specification ( Second Revision )

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2/2.1(MATERIAL- as per the method given in IS : 1889 ( Part I )-1976*)	-	0	Charges mentioned below
4/4.1.1(MANUFACTURE, WORKMANSHIP AND FINISH- Warp yarns- as per IS : 832-l964+)	-	200	Turns per cm in case of warp yarn as per clause no. 5.1.1
3/3.1(DIMENSIONS)	-	0	OK
5/5.1(REQUIREMENTS-Threads per Stated Length)	-	0	OK
5/5.6(REQUIREMENTS-Breaking Load-tested by the method given in IS : 1969-1968)	-	0	OK
5/5.7(REQUIREMENTS-The loss on scouring-tested according to IS : 1383-1977+)	-	0	OK
5/5.3(REQUIREMENTS-Stretchability)	-	0	OK
5/5.2(REQUIREMENTS-Weight per Unit Area)	-	0	OK
4/4.1.2(MANUFACTURE, WORKMANSHIP AND FINISH- Weft yarns)	-	0	OK
3/3.1(DIMENSIONS)	-	0	OK
4/4.1.1(MANUFACTURE, WORKMANSHIP AND FINISH- Warp yarns- as per IS : 832-l964+)	-	0	OK
4/4.2(MANUFACTURE, WORKMANSHIP AND FINISH)	-	0	OK
5/5.1(REQUIREMENTS-Threads per Stated Length)	-	0	OK
5/5.1(REQUIREMENTS-Threads per Stated Length)	-	0	Charges mentioned below
5/5.2(REQUIREMENTS-Weight per Unit Area)	-	0	OK
5/5.3(REQUIREMENTS-Stretchability)	-	0	OK
5/5.4(REQUIREMENTS-Recovery)	-	0	OK
5/5.5(REQUIREMENTS-Chemical Neutrality-according to ' hot method' given in 6.3 of IS : 1390-1961*.)	-	0	OK
2/2.1(MATERIAL- as per the method given in IS : 1889 ( Part I )-1976*)	-	0	OK
3.0(MATERIAL)	-	500	OK
4 (Annexure B)(DIMENSIONS 2) Length (Stretched))	-	300	OK
4.0( DIMENSIONS 1)Width (cm) (Unstretched))	-	250	OK
Clause 5.1.1(Warp Yarns)	-	350	OK
Clause 5.1.2(Weft Yarns)	-	350	OK
5.2(The selvedge )	-	100	OK
Clause 8.1(Threads per Stated Length)	-	100	OK
Clause 8.2(Weight per Unit Area)	-	250	OK
Clause 8.3(Elasticity)	-	500	OK
Clause 8.4(PH for Chemical neutrality)	-	600	OK
Clause 8.5(Breaking Load , N)	-	400	OK
Clause.8.6(Water Soluble Substances)	-	500	OK
Clause 8.7(Ether Soluble Substances, percent)	-	500	OK

Complete

31 Dec, 2026

-
REVISED VERSION OF IS 4605:2020 INCLUDED W.E.F. 11-11-2021.

305

IS 3383 (1982)

Specification for wettable sulphur powder

6300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.1(Description)	-	500	NA
2.2 Table 1(Sulphur content, NV above 50)	-	1000	NA
2.2 Table 1(Material passing through 45 micron IS Sieve, after accelerated storage)	-	1000	NA
2.2 Table 1(Suspensibility, after accelerated storage)	-	2000	NA
2.2 Table 1(Wettability)	-	1000	NA
2.2 Table 1(Arsenic ( as As ))	-	1000	NA

Complete

31 Dec, 2026

-
Included w.e.f. 05-02-2018

306

IS 4320 (1982)

Specification for thiram, technical

4000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.1(Description)	-	500	NA
2.2 Table 1(Bis ( dimethylthiocarbamoyl ) disulphide)	-	1500	NA
2.2 Table 1(Loss on drying at 60°C)	-	1000	NA
2.2 Table 1(Ash content)	-	1000	NA

Complete

31 Dec, 2026

-
Included w.e.f. 05-02-2018

307

IS 4766 (1982)

Specification for thiram water dispersible powders (First Revision)

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.1(Description)	-	500	NA
2.3 Table 1(Thiram content, NV above 50)	-	1500	NA
2.3 Table 1(Sieving requirement)	-	1000	NA
2.3 Table 1(Suspensbility after accelarated storage)	-	2000	NA
2.3 Table 1(Wettability)	-	1000	NA

Complete

31 Dec, 2026

-
Included w.e.f. 05-02-2018

308

IS 4783 (1982)

Specification for thiram seed dressing formulations (First Revision)

4000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.2.1(Description)	-	300	NA
2.2.3(Sieving requirement)	-	1000	NA
2.3 Table 1(Thiram content, NV above 50)	-	2500	NA
2.2.2(Colour)	-	200	NA

Complete

31 Dec, 2026

-
Included w.e.f. 05-02-2018

309

IS 11019 (1984)

Specification for carbofuran, technical

4000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.1(Description)	-	500	NA
2.2 (Table 1, S.no i)(Carbofuran content)	-	1500	NA
2.2 (Table 1, S.no ii)(Moisture content)	-	1000	NA
2.2 (Table 1, S.no iii)(Alkalinity)	-	1000	NA

Complete

31 Dec, 2026

-
Included w.e.f 28.05.2019

310

IS 11995 (1987)

Specification for isoproturon WP

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.1(Description)	-	200	NA
2.4.1(Isoproturon Content)	-	1700	NA
table-1 (ii), cl.2.4(Sieving requirement)	-	600	NA
table-1 (iii), cl.2.4(Suspensihility , after accelerated storage)	-	1000	NA
table-1 (iv), cl.2.4(Wettability)	-	800	NA
table-1 (v), cl.2.4(Acidity/ Alkalinity)	-	700	NA

Complete

31 Dec, 2026

-
Included w.e.f. 05-02-2018

311

IS 12003 (1987)

Specification for fenvalerate, technical

2125 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table 1 (i), cl.2.2(Fenvalerate content)	-	1000	NA
Table 1 (ii), cl.2.2(Acidity)	-	400	NA
Table 1 (iii), cl.2.2(Material insoluble in acetone)	-	525	NA

Complete

31 Dec, 2026

-
Included w.e.f. 05-02-2018

312

IS 12004 (1987)

Specification for isoproturon technical

3900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.1(Description)	-	200	NA
Table 1 (i), cl.2.3(Isoproturon content)	-	1300	NA
Table 1 (ii), cl.2.3(Water content)	-	800	NA
Table 1 (iii), cl.2.3(Melting point)	-	800	NA
Table 1 (iv), cl.2.3(Acidity)	-	800	NA
Table 1 (v), cl.2.3(Alkanility)	-	0	Testing charges already mentioned above i.e. Rs 800/-

Complete

31 Dec, 2026

-
Included w.e.f. 05-02-2018

313

IS 12005 (1987)

Specification for deltamethrin, technical

4300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.1(Description)	-	200	NA
2.2, Table 1(Deltamethrin content)	-	1100	NA
2.2, Table 1(Melting point)	-	600	NA
2.2, Table 1(Optical rotation of 1 percent solution in benzene at 20°C)	-	800	NA
2.2, Table 1(Acid + anhydride corresponding to deltamethrin)	-	800	NA
2.2, Table 1(Acid chloride corresponding to deltamethrin)	-	800	NA

Complete

31 Dec, 2026

-
Included w.e.f. 05-02-2018

314

IS 12015 (1987)

Specification for cypermethrin technical

4620 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.1(Description )	-	200	NA
2.2, Table 1(Cypermethrin content,)	-	1800	NA
2.2, Table 1(Acidity ( as H2SO4 ))	-	520	NA
2.2, Table 1(Moisture content,)	-	500	NA
Amendment no. 1 Page no. 4 table no. 1 clause no. (iv)(Cis trans ratio)	-	1600	NA

Complete

31 Dec, 2026

-
Included w.e.f. 05-02-2018

315

IS 12017 (1987)

Specification for cypermethrin technical concentrate

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.1(Description )	-	200	NA
2.2, Table 1(Cypermethrin content,)	-	1800	NA
2.2, Table 1(Acidity ( as H2SO4 ))	-	500	NA
2.2, Table 1(Moisture content,)	-	500	NA
2.2, Table 1(Relative density at 27 ̊C)	-	500	NA
Amendment no. 1 Page no. 4 table no. 1 clause no. (v) (Cis trans ratio)	-	1500	NA

Complete

31 Dec, 2026

-
Included w.e.f. 05-02-2018

316

IS 2257 (1989)

Paper adhesives, liquid gum and office paste type - Specification (Third Revision)

Type A, Type B & Type C

4000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4.2 Table 1 (i)(Total Solid)	-	200	NA
Clause 4.2 Table 1 (ii)(pH)	-	300	NA
Clause 4.2 Table 1 (iii)(Adhesion Strength)	-	300	NA
Table 1 (iv), 4.2(brittleness and moisture absorption of the dried film)	-	300	NA
Clause 4.2 Table 1 (v)(Stability at 37°C)	-	300	NA
Clause 4.2 Table 1 (vi)(Consistency at 27±2°C)	-	500	NA
Clause 4.2 Table 1 (v)(Keeping Quality )	-	2000	NA
4.1(Description)	-	100	NA

Complete

31 Dec, 2026

-
-

317

IS 8025 (1990)

Monocrotophos,technical specification (Second Revision)

3500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Description)	-	200	NA
3.2 Table 1(Monocrotophos Content)	-	1300	NA
3.2 Table 1(Free-acetic acid monomethylamide)	-	1300	NA
3.2 Table 1(Acidity ( H2S04 ))	-	700	NA

Complete

31 Dec, 2026

-
Included w.e.f. 05-02-2018

318

IS 8074 (1990)

Monocrotophossl - Specification (Second Revision)

4000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2.1(Description)	-	200	NA
3.2.2(Cold Test)	-	500	NA
3.2.3(Flash Point ( Abel ))	-	500	NA
3.3.1(Monocrotophos Content)	-	1200	NA
3.3.2(Free Aceto-Acetic Acid Monomethyl-amide ( MMA ) Content)	-	1200	NA
3.3.3(Acidit)	-	400	NA

Complete

31 Dec, 2026

-
Included w.e.f. 05-02-2018

319

IS 12932 (1990)

Atrazine, technical - Specification

3600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Description)	-	500	NA
3.2, Table 1(Atrazine content)	-	1200	NA
3.2, Table 1(Ionic chloride content (as NaCl))	-	700	NA
3.2, Table 1(Moisture content)	-	600	NA
3.2, Table 1(Melting point)	-	600	NA

Complete

31 Dec, 2026

-
Included w.e.f. 05-02-2018

320

IS 2791 (1992)

Soluble coffee powder - Specification (Third Revision)

6189 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.4 Table 1(Caffeine content)	-	1000	Total charges Rs 15000/- (with ECO mark). Rs 7000/- without ECO mark.
3.1(Description )	-	1100	Cl 3.1- Description- Rs 500/- Cl 3.5.2.1- Freedom from infestation- Rs 200/-; Cl 3.5.2.2- Freedom from extraneous matter, colouring and flavoring, rancidity - Rs 200/-; Cl 3.5.2.3- Freedom from adulterants- Rs 200/-.
3.4 Table 1(Moisture content)	-	800	NA
3.4 Table 1(Total ash)	-	1000	NA
3.4 Table 1(Caffeine content)	-	0	As above
3.4 Table 1(Solubility in boiling)	-	500	NA
3.4 Table 1(Solubility in cold water)	-	500	NA
Clause 3.5(Copper)	-	1200	NA
Ammendment 1.) clause 3.5.2.4(Monocrotophos)	-	7400	NA
Clause no 3.2(Cup test)	-	1500	NA

Complete

31 Dec, 2026

-
Included w.e.f. 05-02-2018

321

IS 3309 (1992)

Soluble Coffee - Chicory powder - Specification (Second Revision)

9100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.4 Table 1(Caffeine content)	-	1000	Total testing charges Rs 9100/- with ECO mark; Total testing charges Rs 7000/- without ECO mark.
3.7(Copper content)	-	1200	NA
3.6.2.4(Monocrotophos)	-	1500	NA
3.1(Description)	-	1100	Cl 3.1 Description- Rs 500/- ; Cl 3.6.2.1 (for ECO mark) -Freedom from infestation- Rs 200/- ; Cl 3.6.2.2 (for ECO mark) -Freedom from extraneous matter -Rs 200/- ; Cl 3.6.2.3 (for ECO mark) -Freedom from adulterants- Rs 200/-
3.4 Table 1(Moisture content)	-	800	NA
3.4 Table 1(Total ash)	-	1000	NA
3.4 Table 1(Solubility in boiling)	-	500	NA
3.4 Table 1(Solubility in cold water)	-	500	NA
3.6.2.4(Monocrotophos)	-	0	As above
Clause no 3.2(Cup test)	-	1500	NA

Complete

31 Dec, 2026

-
Included w.e.f. 05-02-2018

322

IS 9359 (1995)

Pesticide - Phorate G encapsulated - Specification

5820 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2.1(Physical -Description)	-	600	NA
3.2.2(Physical - Sieving Requiremenr)	-	800	NA
3.2.3(Dust)	-	800	NA
3.2.4.1(Encapsulation- % of declared nominal active ingredient in remnants.)	-	1500	NA
3.2.5(Moisture Content)	-	1000	NA
3.3.1(Phorate Content)	-	1500	NA
3.3.2(Acidity)	-	800	NA
3.2.4.2(Encapsulation- The active ingredient in the water (%, by Mass))	-	1500	NA

Complete

31 Dec, 2026

-
Included w.e.f. 05-02-2018

323

IS 14309 (1995)

Blended edible vegetable oils specification

7700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table-1(Moisture and volatile matter percent by mass, Max type1)	-	1000	NA
Table-1(Acid value, mx type 1)	-	800	NA
Table-1(Unsaponifiable matter, percent by mass, MaX type1)	-	800	NA
Table-1(Flash point, Pen&y-Martens type1)	-	800	NA
Table-1(Moisture and volatile matter percent by mass, Max type2)	-	0	As above
Table-1(Acid value, mx type2)	-	0	As above
Table-1(Unsaponifiable matter, percent by mass, MaX type2)	-	0	As above
Table-1(Moisture and volatile matter percent by mass, Max type 3)	-	0	As above
Table-1(Acid value, mx type 3)	-	0	As above
Table-1(Unsaponifiable matter, percent by mass, MaX type3)	-	0	As above
Table-1(Flash point, Pen&y-Martens type3 )	-	0	As above
Table-1(Flash point, Pen&y-Martens ,type 2)	-	0	As above

Complete

31 Dec, 2026

-
Included w.e.f. 05-02-2018

324

IS 14509 (1997)

Lambda - Cyhalothrin, technical - Specification

3780 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 3.1()	-	180	NA
Clause 3.2 Table 1 S.No. i)(Lambda Cyhalothrin Content - IS 14509)	-	1800	NA
Clause 3.2 Table 1 S.No. ii)(Moisture Content - IS 6940)	-	1000	NA
Clause 3.2 Table 1 S.No. iii)(Acidity (as H2SO4) - IS 6940)	-	800	NA

Complete

31 Dec, 2026

-
Included w.e.f. 05-02-2018

325

IS 14551 (1998)

Thiophanate methyl, technical - Specificaiton

4500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Description)	-	500	NA
Table 1 (i), cl.3.2(Thiophanate methyl content)	-	1500	NA
Table 1 (ii), cl.3.2(Moisture content)	-	800	NA
Table 1 (iii), cl.3.2(Acidity)	-	800	NA
Table 1 (iv), cl.3.2(Material insoluble in acetone)	-	900	NA

Complete

31 Dec, 2026

-
Included w.e.f. 05-02-2018

326

IS 14552 (1998)

Thiophanatemethyl, WP specification

5200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2(Description)	-	400	NA
3.3 Table 1 i(Thiophanate methyl content )	-	1600	NA
3.3 Table 1 ii(Material passing through 75 micron IS sieve)	-	800	NA
3.3 Table 1 iii(Suspensibility)	-	1200	NA
3.3 Table 1 iv(Acidity/Alkalinity)	-	600	NA
3.3 Table 1 v(Wettability)	-	600	NA

Complete

31 Dec, 2026

-
Included w.e.f. 05-02-2018

327

IS 432 : Part 2 (1982)

Mild Steel and Medium Tensile Steel Bars and Hard-Drawn Steel Wire for Concrete Reinforcement: Part 2 Hard-Drawn Steel Wire

5600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4.1(Workmanship)	-	200	NA
Cl 5 & 6(Diameter)	-	200	NA
Cl 7(UTM)	-	1000	NA
Cl 8.3(Bending To Both Side At 90°, Then Straight)	-	900	NA
Cl 7(UTM)	-	500	NA
Cl 7(UTM)	-	500	NA
Clause 3.1.1(Sulphur)	-	700	NA
Clause 3.1.1(Phosphorus)	-	700	NA
Clause 3(Nitrogen)	-	700	NA
Clause 7.1(Ultimate Tensile Stress)	-	0	Testing charges already mentioned above
Clause 7.1(Proof Stress (0.2 percent ))	-	0	Testing charges already mentioned above
Clause 7.1(Total Elongation over a gauge length of 8 D Where D is the dia of wire)	-	0	Testing charges already mentioned above
Cl 8.3(Bending To Both Side At 90°, Then Straight)	-	0	Testing charges for Nominal Size are Rs. 200/-

Complete

31 Dec, 2026

-
-

328

IS 432 : Part 1 (1982)

Mild Steel and Medium Tensile Steel Bars and Hard-Drawn Steel Wire for Concrete Reinforcement: Part 1 Mild Steel and Medium Tensile Steel Bars

3100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.1(Workmanship)	-	150	NA
Cl 6.2(Diameter & Ovality)	-	0	Parameter covered under Clause 6.1, Size.
Cl 8.2(Bend test)	-	300	NA
Cl 6.2(Weight)	-	100	NA
Cl 8.1(ultimate tensile stress, yield stress and percentage elongation)	-	800	NA
Cl 9.3(Press)	-	0	Testing charges already mentioned above Rs. 300/-
Cl 8(Physical Requirements)	-	0	Testing charges already mentioned above Rs. 800/-
Clause -4, 4.1(SULPHUR)	-	200	NA
Clause -4, 4.1(PHOSPHURS)	-	200	NA
Clause -4, 4.1(SILICON)	-	400	NA
Clause -4, 4.1(MANGANESE)	-	200	NA
Clause -4, 4.1( CARBON)	-	200	NA
Clause -4, 4.1(NITROGEN)	-	200	NA
Clause 6.1(Size)	-	150	NA
Clause 9.3(Bend test)	-	0	Testing charges already mentioned above Rs. 300/-
Clause 8.1(Yield Stress)	-	800	NA
Clause 8.1(Elongation)	-	800	ok
8.1 & 9.2(Yield Strength - IS: 1608 (P1))	-	0	Testing charges already mentioned above Rs. 800/-
8.1 & 9.2(Elongation on SoA 5.65mm GL - IS: 1608 (P1))	-	0	Testing charges already mentioned above Rs. 800/-
Clause 5.1(Freedom from Defect)	-	0	Testing charges already mentioned above Rs. 150/-
Clause 6.2(Mass)	-	0	Testing charges already mentioned above Rs. 100/-
Clause -4, 4.1(Chromium)	-	400	NA
Clause -4, 4.1(Molybdenum)	-	400	NA
Clause -4, 4.2(VANADIUM)	-	400	NA
Clause 4(Copper)	-	200	NA
Clause -4, 4.1(Nickel)	-	200	NA
Clause -4, 4.3(TITANIUM)	-	200	NA
Clause -4, 4.1( ALUMINIUM)	-	200	NA
Clause -4, 4.1(NIOBIUM)	-	200	NA
Clause 4(Carbon Equivalent)	-	200	NA
Clause 4(Boron)	-	200	NA

Complete

31 Dec, 2026

-
-

329

IS 15138 (2010)

Textiles – Jute bags for packing 50 kg sugar – Specification (first revision)

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5,5.1,5.2 Table 1,i) a) Cl.8.3.2 of IS 9113 Table A / B / C( Outside length )	-	300	OK
5,5.1,5.2 Table 1,i) b) Cl.8.3.2 of IS 9113 Table A / B / C(Outside width)	-	300	OK
5,5.1,5.2 Table 1,ii) Cl.8.4.2 of IS 9113 Table A / B / C(Ends/dm)	-	300	OK
5,5.1,5.2 Table 1,iii) Cl.8.4.2 of IS 9113 Table A / B / C(Picks/dm)	-	300	OK
5,5.1,5.2 Table 1,iv) Cl.8.5.2 of IS 9113 Table A / B / C(Corrected mass per bag)	-	300	OK
5,5.1,5.2 Table 1,v) a) Cl.8.6.2 of IS 9113 Table A / B / C(Average breaking load of sacking (ravelled strip method, 5.0 cm × 20.0 cm), Min, N (kgf) Warpway:)	-	400	OK
5,5.1,5.2 Table 1,v) b) Cl.8.6.2 of IS 9113 Table A / B / C(Average breaking load of sacking (ravelled stripmethod, 5.0 cm × 20.0 cm), Min, N (kgf) Weftway :)	-	400	NA
5,5.1,5.2 Table 1,vi) a) Cl.8.7 of IS 9113 Table A / B / C( Average breaking load of sacking (ravelled stripmethod, 5.0 cm × 20.0 cm), Min, N (kgf) Warpway:)	-	400	OK
5,5.1,5.2 Table 1,vi) b) Cl.8.7 of IS 9113 Table A / B / C( Average breaking load of sacking (ravelled stripmethod, 5.0 cm × 20.0 cm), Min, N (kgf) Weftway :)	-	400	OK
5,5.1,5.2 Table 1,vii)a) Cl.8.2 of IS 9113 Table A / B / C(Moisture regain)	-	300	OK
5,5.1,5.2 Table 1,vii)b) Table A / B / C(Contract moisture regain)	-	350	OK
4.2 IS 9113(Seam )	-	300	OK
4.3 IS 9113(Hemming at the Mouth )	-	200	OK
4.4 Annex B(Freedom from Defects)	-	300	OK
4.1(Fabric)	-	200	Weave of Fabric
4.5 IS 10146(Liner)	-	1000	Thickness of Liner & Overall Migration Rs 1000/- And Rs 300/- for missing parameter GSM under cl. no. 4.4

Complete

31 Dec, 2026

-
Included w.e.f. 05-02-2018

330

IS 14968 (2015)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packing 50 Kg/25 kg sugar – Specification (first revision)

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2 and Table 1 ii a(Dimensions Inside Length)	-	100	OK
5.2 and Table 1 ii b(Dimensions Inside Width)	-	100	OK
5.2 and Table 1 iii(Ends per dm )	-	100	OK
5.2 and Table 1 iv(Picks per dm )	-	100	OK
5.1 and Table 1 v a(Mass of unlaminated sack IS 1964)	-	200	OK
5.1 and Table 1 v b(Mass of unlaminated sack with liner )	-	200	OK
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise IS 1969 (Part 1))	-	150	OK
5.2 and Table 1 vi(Breaking strength of bottom seam IS 9030 )	-	300	OK
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise IS 1969 (Part 1))	-	100	OK
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	2000	OK
5.2 and Table 1 x(Ash content )	-	500	OK
4.3(Sacks)	-	100	OK
4.3.1(The two rows of stitches shall be separated from each other)	-	300	OK
4.3.1( The outer stitch)	-	0	Testing Charges mentioned above
4.4(Liner IS 10146 or IS 10910.)	-	600	Parameters under Liner: Length & Width of Liner, Bottom seam of Liner, Thickness of Liner & Visual inspection for defects.
4.3(Sacks)	-	0	OK
4.3.1(Bottom Seam)	-	300	OK
4.3.1( The stitching shall be done with double fold over seam to a depth )	-	0	Testing Charges mentioned above
4.3.1(Stitches pass through a minimum of six layers of the fabric. )	-	0	Testing Charges mentioned above
4.3.1(stitches/dm)	-	0	Testing Charges mentioned above
4.3.2(Mouth)	-	200	OK
4.4(Mass of the loose liner )	-	0	Test Not Applicable
4.4(Width of the loose liner)	-	100	OK
4.4(Length of the line)	-	100	OK
4.4(Bottom seam of the loose liner)	-	100	OK
5.2 and Table 1 ii a(Dimensions Inside Length)	-	150	OK
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise IS 1969 (Part 1))	-	150	OK
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise IS 1969 (Part 1))	-	100	OK
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	0	testing charges mentioned above
5.2 and Table 1 x(Ash content )	-	0	testing charges mentioned above
4.1(Raw Material)	-	2000	Overall Migration test on Granules samples of HDPE or PP sample as per IS 10146 or IS 10910
4.2(Tapes – Width IS 6192 and IS 11197)	-	2700	Rs. 2700/- for each, testing of Tape sample (HDPE or PP) as per IS 6192 or IS 11197
4.2(Construction)	-	100	Mesh of the fabric
4.3.2(Mouth)	-	0	testing charges mentioned above
4.5 and Table 1 i(Capacity)	-	100	GSM Parameter is missing as per Clause no. 4.2, Testing charges = Rs. 200/-

Complete

31 Dec, 2026

-
Included w.e.f. 05-02-2018

Bureau of Indian Standards

The National Standards Body of India

IDMA LABORATORIES LIMITED

PLOT NO. 391 INDUSTRIAL AREA PHASE 1, PANCHKULA, Panchkula, Haryana, 134113

9888002607 testing@idmagroup.co.in

Scope List