BIS - LIMS (Laboratory Information Management System)

IDMA LABORATORIES LIMITED, PANCHKULA

PLOT NO. 391 INDUSTRIAL AREA PHASE 1, PANCHKULA, Panchkula, Haryana, 134113

9888002607 testing@idmagroup.co.in

Scope List

Reset

464 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

241

IS 10931 (1984)

Specification for lauric acid

Grade 1, 2 & 3

17500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Description - IS 10931:1984)	-	500	NA
3.2, 6.1 (Table 1 (i))(Lauric Acid Content - IS 548 (Part 3/Sec 1) : 2021)	-	4000	NA
3.2, 6.1 (Table 1 (ii))(Moisture - IS 548 (Part 1/Sec 2) : 2021)	-	1000	NA
3.2, 6.1 (Table 1 (iii))(Saponification - IS 548 (Part 1/Sec 2) : 2021)	-	1500	NA
3.2, 6.1 (Table 1 (iv))(Acid value - IS 548 (Part 1/Sec 2) : 2021)	-	1500	NA
3.2, 6.1 (Table 1 (v))(Iodine Value - IS 548 (Part 1/Sec 2) : 2021)	-	1500	NA
3.2, 6.1 (Table 1 (vi))(Mineral Acidity - IS 10931:1984)	-	1500	NA
3.2, 6.1 (Table 1 (vii))(Ash - IS 10931:1984)	-	1500	NA
3.2, 6.1 (Table 1 (viii))(Unsaponifiable matter - IS 548 (Part 1/Sec 2) : 2021)	-	1500	NA
3.2, 6.1 (Table 1 (ix))(Titre - IS 548 (Part 1/Sec 2) : 2021)	-	1500	NA
3.2, 6.1 (Table 1 (x))(Colour)	-	1500	NA

31 Dec, 2026

-
-

242

IS 1785 : Part 1 (1983)

Specification for plain hard - Drawn steel wire for prestressed concrete: Part 1 cold drawn stress - Relieved wire (Second Revision)

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.1(Diameter)	-	300	Total testing charges are Rs. 35000/- (Including Relaxation) test. Total testing charges are Rs. 35000/- (Including Relaxation test) for 1000 hrs. Total testing charges are Rs. 10000/- (Including Relaxation test) for 100 hrs.
Cl 6.3(Reverse Bend Test)	-	500	NA
Cl 6.1(Tensile Test On UTM)	-	1000	NA
Cl 6.2(Tensile Test On UTM)	-	0	NA
Cl 6.4(Tensile Test On UTM)	-	800	NA
Clause 3.3(Workmanship )	-	200	NA
Clause 3.4(Surface Finish)	-	200	NA
Clause 3.5(Weld joints)	-	200	NA
Clause 6.5(Relaxation stress(1000 h))	-	30000	NA
Clause 6.5.1(Relaxation stress(100 h))	-	10000	Testing charges same as for 100 hours
Clause 3.1.1(Sulphur)	-	350	NA
Clause 3.1.1(Phosphorus)	-	350	NA
Cl 6.4(Tensile Test On UTM)	-	300	Ductility testing charges are Rs. 800/-

31 Dec, 2026

-
-

243

IS 1806 (2018)

Malted milk foods - Specification (Second Revision)

9500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.3-Table 1- i(Moisture)	-	200	Rs-9500/- for Type-I Rs-8900/- for Type-II
4.3-Table 1- ii(Total protein (N × 6.25) (on dry basis),)	-	500	NA
4.3-Table 1- iii(Total fat (on dry basis))	-	500	NA
4.3-Table 1- iv(Total ash (on dry basis))	-	400	NA
4.3-Table 1- v(Acid insoluble ash (on dry basis) (in dilute HCl))	-	400	NA
4.3-Table 1- vi(Solubility)	-	500	NA
4.3-Table 1- vii(Cocoa powder (on dry basis))	-	0	Records of addition to be maintained by manufacturers.
4.3-Table 1- viii(Test for starch)	-	600	NA
4.3-Table 1- ix(Bacterial count)	-	600	NA
4.3-Table 1- x(Coliform count)	-	600	NA
4.3-Table 1- xi(E. coli)	-	600	NA
4.3-Table 1- xii(Yeast and mould count)	-	600	NA
4.3-Table 1- xiii(Salmonella)	-	600	NA
4.3-Table 1- xiv(Shigella)	-	600	NA
4.3-Table 1- xv(Vibrio cholerae )	-	600	NA
4.3-Table 1- xv( V. parahaemolyticus)	-	600	NA
4.3-Table 1- xvi(Faecal streptococci )	-	600	NA
4.3-Table 1- xvi( Staphylococcusaureas)	-	600	NA

31 Dec, 2026

-
Included w.e.f. 15-11-2022

244

IS 9532 (1980)

Specification for chakka and shrikhand

6300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1.2 (Appearance and Colours)	-	400	Chakka
3.1.3(Odour and Flavour)	-	400	Chakka
3.1.4(Texture and Consistency)	-	400	Chakka
3.1.1 and 3.1.6 Table 1(Total solids, Chakka made from skimmed milk)	-	800	Chakka
3.1.1 and 3.1.6 Table 1(Milk fat, Chakka)	-	800	Chakka
3.1.1 and 3.1.6 Table 1(Milk protein, Chakka)	-	800	Chakka
3.1.1 and 3.1.6 Table 1( Titratable acidity)	-	800	Chakka
3.1.1 and 3.1.6 Table 1(Total ash, Chakka )	-	800	Chakka
3.1.1 and 3.1.6 Table 1(Coliform count)	-	800	Chakka
3.1.1 and 3.1.6 Table 1(Yeast and mould count)	-	800	Chakka
3.2.2 (Appearance and Colours)	-	400	Shrikhand
3.2.3(Odour and Flavour)	-	400	Shrikhand
3.2.4(Texture and Consistency)	-	400	Shrikhand
3.2.1 and 3.2.6 Table 2(Total solids)	-	800	Shrikhand
3.2.1 and 3.2.6 Table 2(Milk fat)	-	800	Shrikhand
3.2.1 and 3.2.6 Table 2(Milk protein)	-	800	Shrikhand
3.2.1 and 3.2.6 Table 2( Titratable acidity)	-	800	Shrikhand
3.2.1 and 3.2.6 Table 2(Sugar ( Sucrose ))	-	800	Shrikhand
3.2.1 and 3.2.6 Table 2(Total ash)	-	800	Shrikhand
3.2.1 and 3.2.6 Table 2(Coliform count)	-	800	Shrikhand
3.2.1 and 3.2.6 Table 2(Yeast and mould count)	-	800	Rs 7600 /- for Shrikhand and Rs 6800/- for Chakka

31 Dec, 2026

-
Included w.e.f. 15-11-2022

245

IS 2802 (1964)

Specification for ice-cream

7900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Odour and Flavour)	-	500	NA
3.2(Texture and Appearance)	-	500	NA
3.3(Freedom from Dirt)	-	500	NA
4.1 Table 1(weight in gram, ice cream)	-	800	NA
4.1 Table 1(Total Solids)	-	800	NA
4.1 Table 1(Milk Fat, ice cream)	-	800	NA
4.1 Table 1(Acidity percent, ice cream only)	-	800	NA
4.1 Table 1(Sucrose, all types)	-	800	NA
4.1 Table 1(Phosphatase test of mix)	-	800	NA
4.1 Table 1(Total Colony Count)	-	800	NA
4.1 Table 1(Coliform Count)	-	800	NA
6.1(Odour and Flavour-IS 2802:2022)	-	0	NA
6.2(Texture and Appearance)	-	0	NA
6.3(Freedom from Dirt)	-	0	NA
6.5,Table(i)(Weight in grams- IS 2802:2022)	-	0	NA
6.5,Table(ii)(Total Solids - IS 12333)	-	0	NA
6.5,Table(iii)(Milk fat -IS 11762)	-	0	NA
6.5,Table(iv)(Milk Protein-IS 11917)	-	0	NA
6.5,Table(v)(Acidity -IS 1479 (Part-1))	-	0	NA
6.5,Table(vi)(Sucrose-IS 11764)	-	0	NA
6.5,Table(vii)(Phosphatase test of mix-Is 8479(Part-1))	-	0	NA
6.5 Table:2(i)(Aerobic Plate count - IS 5402(P-2))	-	0	NA
3.1(Odour and Flavour)	-	0	NA
Cl-4.1, Table 1, sl.no-i(Weight in grams)	-	0	NA
Cl-4.1, Table 1, sl.no-ii(Total solids)	-	0	NA
Cl-4.1, Table 1, sl.no-iii(Milk fat)	-	0	NA
Cl-4.1, Table 1, sl.no-iv(Acidity)	-	0	NA
Cl-4.1, Table 1, sl.no-v(Sucrose)	-	0	NA
4.1 Table 1(Coliform Count)	-	0	NA
4.1 Table 1(Phosphatase test of mix)	-	0	NA

31 Dec, 2026

-
Included w.e.f. 15-11-2022

246

IS 5149 (2020)

Specification for Maleic Anhydride, Technical ( Second Revision )

8300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.2.1(Description)	-	500	NA
Cl.2.2, Table-1(i)(Crystallizing point)	-	1200	NA
Cl.2.2, Table-1(ii)(Colour of the molten material)	-	1000	NA
Cl.2.2, Table-1(iii)(Maleic acid content)	-	1800	NA
Cl.2.2, Table-1(iv)(Maleic anhydride content)	-	1800	NA
Cl.2.2, Table-1(v)(Ash)	-	1000	NA
Cl.2.2, Table-1(vi)(Iron content (as Fe))	-	1000	NA

31 Dec, 2026

-
Included w.e.f. 15-11-2022

247

IS 3564 (1995)

Hydraulically Regulated Door Closers -Specification

17000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Nominal Sizes)	-	950	NA
B-1.2(a) Visual Inspection)	-	650	NA
B-1.3(b) Surface)	-	250	NA
B-1.4(c) Performance Requirements)	-	6900	NA
B-1.5(d) Endurance Test)	-	4000	NA
9(Finish)	-	450	na
9(Finish)	-	0	Testing charges already mentioned above
8(Essential Requirements)	-	0	Testing charges for Hydraulic Oil testing are Rs. 750/- Testing charges for The nut/top lid assembly are Rs. 400
8(Essential Requirements)	-	0	NA
8(Essential Requirements)	-	450	NA
8(Essential Requirements)	-	0	NA
8(Essential Requirements)	-	0	NA
8(Essential Requirements)	-	0	NA
8(Essential Requirements)	-	0	NA
8(Essential Requirements)	-	0	NA
8(Essential Requirements)	-	600	NA
Cl. 7 Table 2(Materials)	-	450	NA
Clause 7 (Table 2 - ii)(Material for Torsion spring helical spring)	-	0	Testing charges already mentioned above
Clause 7 (Table 2 - iii)(Material for Nuts)	-	0	Testing charges already mentioned above
Clause 7 (Table 2 - iv)(Material for Piston or Rack-piston/pinion)	-	0	Testing charges already mentioned above
Clause 7 (Table 2 - v)(Material for Material for Packing/washers)	-	0	Testing charges already mentioned above
Clause 7 (Table 2 - vi)(Material for Control valve screw)	-	0	Testing charges already mentioned above
Clause 7 (Table 2 - vii)(Material for All weather resistant homogeneous high viscosity hydraulic)	-	0	Testing charges already mentioned above
Clause 7 (Table 2 - viii)(Material for Adjusting arm)	-	0	Testing charges already mentioned above
Clause 7 (Table 2 - ix)(Material for Main arm )	-	0	Testing charges already mentioned above
Clause 7 (Table 2 - x)(Material for Clamp)	-	0	Testing charges already mentioned above
Clause 7 (Table 2 - xi)(Material for Concentric ratchet ( For bottle type ) )	-	0	Testing charges already mentioned above
Clause 7 (Table 2 - xii)(Material for Material for Eccentric shaft )	-	0	Testing charges already mentioned above
Clause 7 (Table 2 - xiii)(Material for Internal bearing and gland )	-	0	Testing charges already mentioned above
Clause 7 (Table 2 - xiv)(Material for Main arm bolt)	-	0	Testing charges already mentioned above
Clause 7 (Table 2 - xv)(Material for Top nut)	-	0	Testing charges already mentioned above
Clause 7 (Table 2 - xvi)(Material for Pawl)	-	0	Testing charges already mentioned above
Clause 7 (Table 2 - xvii)(Material for Top lid)	-	0	Testing charges already mentioned above
8(Essential Requirements)	-	500	NA
8(Essential Requirements)	-	650	NA

31 Dec, 2026

-
Included w.e.f. 05-02-2018

248

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

18000 View breakup
Without pull out test= Rs. 8500/- for pull out test only = Rs. 8500/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 7.2 Table -2 (Nominal Mass)	-	400	Total testing charges are Rs. 18000/- including Pull Out test Testing charges for Pull Out test only Rs. 8000/-
Cl. 8.1 Table 3(Tensile Strength (TS))	-	500	Testing charges for Freedom from defects are Rs. 200/-
Cl. 8.1 Table 3(Elongation, percentage)	-	500	NA
Cl. 8.1 Table 3(TS/YS ratio)	-	500	NA
Cl. 5 (Cl.5 Mean area of ribs/unit length (Ar), )	-	700	NA
Cl. 5 (Cl. 5 - Mean projected area of transverse ribs (1/3 of Ar))	-	0	Testing charges already mentioned above at Cl. 5 (Cl.5 Mean area of ribs/unit length (Ar) i.e. Rs. 700/-
Cl. 6.1(Nominal Size)	-	200	NA
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON )	-	300	Testing charges for Carbon content.
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR)	-	300	NA
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 PHOSPHURS)	-	300	NA
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 NITROGEN)	-	300	NA
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 MANGANESE)	-	300	NA
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR+PHOSPHUR)	-	0	NA
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON +EQUIVELENT )	-	0	NA
Cl 5(Deformations and Surface Characteristics)	-	0	Testing charges already mentioned above Cl. 5 (Cl.5 Mean area of ribs/unit length (Ar), i.e. Rs. 700/-
Cl 5(Deformations and Surface Characteristics)	-	0	Testing charges already mentioned above Cl. 5 (Cl.5 Mean area of ribs/unit length (Ar), i.e. Rs. 700/-
Cl 5(Deformations and Surface Characteristics)	-	0	Testing charges already mentioned above Cl. 5 (Cl.5 Mean area of ribs/unit length (Ar), i.e. Rs. 700/-
Cl. 8.1 Table 3(Yield Stress (YS))	-	500	NA
Cl. 9.3, Table 4(Bend Test )	-	500	NA
Clause 9.4(Rebend Test)	-	500	NA
Clause 6.3(Effective Cross-sectional Area)	-	500	NA
Clause 8.1(Table 3)(Total Elongation at Maximum Force)	-	500	NA
Cl. 5.3 (a)(The ribs contributing the projected area - Longitudinal Ribs)	-	0	Testing charges already mentioned above Cl. 5 (Cl.5 Mean area of ribs/unit length (Ar), i.e. Rs. 700/-
4.1(Ni)	-	300	NA
4.1(Mo)	-	300	NA
4.1(Cr)	-	300	NA
4.1( Ti)	-	300	NA
4.1(V)	-	300	NA
4.1( Nb)	-	300	NA
4.1( Copper %)	-	300	NA
4.2(Boron (B))	-	300	NA
4.1( Aluminium %)	-	300	NA
4.1(Sulphur and phosphorous)	-	0	NA
4.1(Silicon %)	-	300	NA
Cl.4.2 of IS 1786 (Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	NA
Cl.4.2 of IS 1786 (Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	NA
Cl.4.2 of IS 1786 (Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	NA
Cl.4.2 of IS 1786 (Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	NA
4.2(Niobium (Nb))	-	0	NA
5.7(Pull-out test - IS:2770(P1))	-	8000	NA

31 Dec, 2026

-
Pull Out test included w.e.f. 13.10.2023

249

IS 12299 (1998)

Dairy whitener - Specification (First Revision)

5600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Description)	-	100	NA
5.3(Flavour and Taste)	-	100	Including Cl 5.1- Extraneous Matter, Added Colour & Flavour
5.6 Table 1 i)(Moisture)	-	350	NA
5.6 Table 1 ii)(Milk Solids (non-fat))	-	350	NA
5.6 Table 1 iii)(Insolubility Index)	-	350	NA
5.6 Table 1 iv)(Total Ash (on dry basis))	-	400	NA
5.6 Table 1 vi)(Acid Insoluble ash)	-	400	NA
5.6 Table 1 vii)(Total added sugar)	-	500	NA
5.6 Table 1 v)(Milk Fat)	-	350	NA
5.5.1(Bacterial Count)	-	500	NA
5.5.2(Coliform Count)	-	500	NA
5.5.2(E Coli)	-	700	NA
5.5.2(Staphylococcus aureus)	-	700	NA
5.5.3(Salmonella)	-	500	NA

31 Dec, 2026

-
Included w.e.f. 15-11-2022

250

IS 5295 (2021)

Ethylene Glycol - Specification (Second Revision)

General Grade & Fibre Grade

19150 View breakup
Fiber grade Rs. 19150/- General grade Rs. 10850/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2, Table 1(Colour, Hazen units/Pt-Co, Max)	-	650	Total testing charges for Fiber Grade are Rs. 19150/- Total testing charges for General Grade Rs. 10850/-
4.2, Table 1(Relative density1) at 20/20 °C)	-	1000	NA
4.2, Table 1(Distillation range at 760 mm Hg (a) Initial boiling point, °C Min)	-	3500	NA
4.2 (Chem)(Distillation range at 760 mm Hg (b) The temperature at which 95 ml of material shall distil, °C, Max)	-	0	Testing charges already mentioned above i.e. Rs. 3500/-
4.2, Table 1(Moisture content, percent by mass, Max)	-	900	NA
4.2, Table 1(Acidity (as acetic acid), ppm, Max)	-	900	NA
4.2, Table 1(Ultra-Violet transmittance in 1 cm cell at a) 220 nm, Min)	-	2500	NA
4.2, Table 1(Ultra-Violet transmittance in 1 cm cell at b) 275 nm, Min)	-	0	Testing charges already mentioned above i.e. Rs. 2500/-
4.2, Table 1(Ultra-Violet transmittance in 1 cm cell at c) 350 nm, Min)	-	0	Testing charges already mentioned above i.e. Rs. 2500/-
4.2, Table 1(Freezing point of equal volumes of material and water, Max)	-	1000	NA
4.2, Table 1(Iron content, ppm, Max)	-	1600	NA
4.2, Table 1(Chlorides content (as Cl), ppm, Max)	-	1600	NA
4.2, Table 1(Diethylene glycol content, ppm, Max)	-	1600	NA
4.2, Table 1(Purity, percent, Min)	-	2500	NA
4.2, Table 1(Aldehyde as CH3CHO or HCHO, ppm, Max)	-	2000	NA
4.1(Description)	-	400	NA

31 Dec, 2026

-
-

251

IS 15609 (2005)

Polyethylene flexible pouches for the packing of natural mineral water and packaged drinking water - Specification

14900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1 Annex E(Water Potability test (after 30 Days) a) Taste b) Odour)	-	1000	NA
6.1.7 IS: 9845:1998(Migration- b. Colour migration)	-	1000	NA
6.1.4(Odour)	-	100	NA
6.1.1(Description)	-	200	NA
6.1.2(Film Form)	-	100	NA
6.1.3(Winding of the Film )	-	100	NA
6.1.5 A-2 of IS: 2508:2016(Thickness)	-	200	NA
6.1.6(Width)	-	200	NA
6.1.8 Annex 4 of IS:2508:2016(Tensile Strength a. Lengthwise direction)	-	500	NA
6.1.8 Annex 4 of IS:2508:2016(Tensile Strength b. Crosswise direction)	-	500	NA
6.1.9 Annex 4 of IS:2508:2016(Elongation at break - a. Lengthwise direction)	-	325	NA
6.1.9 Annex 4 of IS:2508:2016(Elongation at break - b. Crosswise direction)	-	325	NA
6.1.10 Annex -6 of IS:2508:2016(Dart impact Resistance)	-	450	NA
7.2 Annex F(Stack Load test)	-	500	NA
7.3 Annex G(Drop test )	-	500	NA
7.4 Annex H(Ink adhesion test for printed pouches)	-	400	NA
7.5 Annex J(Product resistance test for printed pouches)	-	500	NA
6.1.7 IS: 9845:1998(Migration- a. Amount of extractive )	-	0	Already add in parameter
Clause 7.2(Water Potability test (after 30 Days) a) Taste b) Odour)	-	0	Already add in parameter
CL 6.1.11.2 and 6.1.11.3, Table 3 (i)(Barium)	-	800	NA
Table 3(ii) Cobalt)	-	800	NA
Table 3(iii) Copper)	-	800	NA
CL 6.1.11.2 and 6.1.11.3, Table 3 (iv)(Iron)	-	800	NA
CL 6.1.11.2 and 6.1.11.3, Table 3 (v)(Lithium)	-	800	NA
CL 6.1.11.2 and 6.1.11.3, Table 3 (vi)(Manganese)	-	800	NA
CL 6.1.11.2 and 6.1.11.3, Table 3 (vii)(Zinc)	-	800	NA
CL 6.1.11.2 and 6.1.11.3, Table 3 (viii)(Antimony)	-	800	NA
CL 6.1.11.2 and 6.1.11.3, Table 3 (ix)(Phthalic acid, bis(2-ethylhexyl) ester (DEHP))	-	1600	NA

31 Dec, 2026

-
Included w.e.f. 05-02-2018. Amendment No. 2 Included w.e.f. 09.05.2023.

252

IS 2508 (2016)

Polyethylene films and sheets - Specification (Third Revision)

10600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.1(Appearance)	-	200	Total testing charges are Rs. 10600/- excluding Raw material.
5.1.2(Film Form)	-	200	NA
5.1.3(Odour)	-	200	NA
5.1.4(Density, Cl.5 of IS 13360(Part-3/Section-1))	-	500	NA
5.1.5(Melt Flow Index. Cl 6, 7 of IS 13360(Part-4/Section-1))	-	500	NA
5.1.6a(Carbon Black Content, Annex-A)	-	500	NA
5.1.6b(Ash Content, Annex-A)	-	500	NA
5.1.6c(Carbon Black Dispersion, Cl.16 of IS 2530)	-	500	NA
5.2.2(Tolerance on Thickness, Annex-A)	-	300	NA
6.1, Table 1(Tensile strength at break. A) Machine Direction. IS 13360 (Part 5/Sec 1))	-	1000	NA
6.1, Table 1(Tensile strength at break. B) Transverse Direction. IS 13360 (Part 5/Sec 3))	-	0	Testing charges already mentioned above i.e. Rs. 1000/-
6.1, Table 1(Elongation at break ,A) Machine direction .IS 13360(Part-5/sec-1) )	-	500	NA
6.1, Table 1(Elongation at break ,B) Cross-machine direction..IS 13360(Part-5/sec-3) )	-	0	Testing charges already mentioned above i.e. Rs. 500/-
6.1, Table 1(Dartimpact strength Method B of IS 13360 (Part-5/sec-6) )	-	700	NA
6.1, Table 1(Tear resistence. A) Machine direction Annex B)	-	700	NA
6.1, Table 1(Tear resistence. B) Transverse direction )	-	0	Testing charges already mentioned above i.e. Rs. 700/-
7.1. Table 2(Tensile strength at break A) Machine direction IS 13360 (Part-5/sec-1) )	-	0	Testing charges already mentioned above i.e. Rs. 1000/-
7.1. Table 2(Tensile strength at break,B) Crosse machine direction IS 13360 (Part-5/sec-3) )	-	0	Testing charges already mentioned above i.e. Rs. 1000/-
7.1. Table 2(Elongation at break , A) Machine direction IS 13360 (Part-5/sec-3) IS 13360 (Part-5/sec-1) )	-	0	Testing charges already mentioned above i.e. Rs. 500/-
7.1. Table 2(Elongation at break , A) Transverse direction IS 13360 (Part-5/sec-3) )	-	0	Testing charges already mentioned above i.e. Rs. 500/-
7.1. Table 2(Dart impact strenght , Method A of IS 3360 (Part-5/sec-6) )	-	0	Testing charges already mentioned above i.e. Rs. 700/-
8.1, Table 3(Tensile properties , B) Break strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	500	NA
8.1, Table 3(Tensile properties ,D) Break elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	500	NA
8.1, Table 3(Tear resistance , Annex B)	-	0	Testing charges already mentioned above i.e. Rs. 700/-
8.1, Table 3(Puncture resistance , Annex C)	-	500	NA
9.1, Table 4(Tensile properties ,A) Yield strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	500	NA
9.1, Table 4(Tensile properties , B) Break strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0	Testing charges already mentioned above i.e. Rs. 500/-
9.1, Table 4(Tensile properties ,C) Yield elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	500	NA
9.1, Table 4(Tensile properties ,D) Break elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0	Testing charges already mentioned above i.e. Rs. 500/-
9.1, Table 4(Tear resistance , Annex B)	-	0	Testing charges already mentioned above i.e. Rs. 700/-
9.1, Table 4(Puncture resistance , Annex C)	-	0	Testing charges already mentioned above i.e. Rs. 700/-
6.1, Table 1(Ageing test at (70-1)c for 7 days , cl 4 IS 7016 )	-	1500	NA
7.1. Table 2(Ageing test at (70-1)c for 7 days , cl 4 IS 7016 )	-	0	Testing charges already mentioned above i.e. Rs. 1500/-
Clause 5.2.3(Tolerance on Width)	-	300	NA
Clause 6.1(Table 1)(Decrease in Tensile Strength after Ageing(Machine Direction))	-	0	Testing charges already mentioned above i.e. Rs. 1500/-
Clause 6.1(Table 1)(Decrease in Tensile Strength after Ageing(Transverse Direction))	-	0	Testing charges already mentioned above i.e. Rs. 1500/-
Clause 7.1(Table 2)(Decrease in Tensile Strength after Ageing(Machine Direction))	-	0	Testing charges already mentioned above i.e. Rs. 1500/-
Clause 7.1(Table 2)(Decrease in Tensile Strength after Ageing(Transverse Direction))	-	0	Testing charges already mentioned above i.e. Rs. 1500/-

31 Dec, 2026

-
-

253

IS 269 (2015)

Ordinary portland cement - Specification (Sixth Revision)

13500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 Table-3 ii a(Expansion by Le Chatelier)	-	600	Total testing charges excluding Optional test (Transverse strength) are Rs. 13500/- Testing charges for Optional test only (Transverse strength) Rs. 5000/-
7 Table-3 ii b(Expansion by Autoclave)	-	1000	Testing charges for Performance improver are Rs. 1500/-
7 Table-3 iii a(Setting Time Initial)	-	500	NA
7 Table-3 iii b(Setting Time Final)	-	500	NA
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	2000	NA
6.1 Table-2 viii(Alkali content)	-	600	NA
6.1 Table-2 vii(Chloride content)	-	600	NA
6.1 Table-2 vi(Loss on ignition)	-	600	NA
6.1 Table-2 v(Total Sulphur Content calculated as Sulphuric Anhydride)	-	600	NA
6.1 Table-2 ii.(Ratio of percentage of alumina to that of iron oxide)	-	600	NA
6.1 Table-2 i.(Ratio of percentage of lime to percentage of silica, alumina and iron oxide)	-	1800	NA
6 - Table - 1 iv(Magnesia - Cl 4.8 of IS 4032:1985)	-	600	OK
6.1 Table-2 iii.(Insoluble residue)	-	600	NA
7 Table-3 i.(Fineness)	-	800	NA
7 Table-3 v(Transverse Strength - IS 4031 Part 8 (Optional))	-	5000	NA
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	0	Testing charges already mentioned above
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	0	Testing charges already mentioned above
7 Table-3 v(Transverse Strength - IS 4031 Part 8 (Optional))	-	0	Testing charges already mentioned above

31 Dec, 2026

-
-

254

IS 170 (2020)

Acetone — Specification ( Fifth Revision )

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl No 3.1( Description)	-	400	NA
Cl No 3.2(Miscibility with Water)	-	500	NA
Cl 3.3 and 6.1 ANNEX A [ Table 1, Sl No. (i) ](Purity)	-	2000	NA
Cl 3.3 and 6.1 [ Table 1, Sl No. (ii) ] ref to IS 8768(Colour)	-	800	NA
Cl 3.3 and 6.1 [ Table 1, Sl No. (iii) ] ref to 6 of IS 82(Relative density, at 27/27 °C)	-	800	NA
Cl 3.3 and 6.1 [ Table 1, Sl No. (iv) ] IS 1448 (Part 18) with the thermometer containing to the requirements given to Annex B(*Distillation range)	-	800	NA
Cl 3.3 and 6.1 [ Table 1, Sl No. (v) ] ref to IS 2362(Water content)	-	1000	NA
Cl 3.3 and 6.1 [ Table 1, Sl No. (vi) ] ref to 8 of IS 82(Residue on evaporation)	-	800	NA
Cl 3.3 and 6.1 ANNEX C [ Table 1, Sl No. (vii) ](Acidity (as CH3COOH),)	-	800	NA
Cl 3.3 and 6.1 ANNEX D [ Table 1, Sl No. (viii) ](Alkalinity)	-	800	NA
Cl 3.3 and 6.1 ANNEX E [ Table 1, Sl No. (ix) ](Permanganate test)	-	800	NA
Cl 3.3 and 6.1 ANNEX F [ Table 1, Sl No. (x) ](Alcoholic impurities)	-	500	NA
Cl 3.3 and 6.1 ANNEX A [ Table 1, Sl No. (xi) ](Benzene content)	-	1000	NA
Cl 3.3 and 6.1 ANNEX A [ Table 1, Sl No. (xii) ](Methanol content)	-	1000	NA

31 Dec, 2026

-
Included w.e.f. 15-11-2022

255

IS 16232 (2014)

Iron fortified iodized salt (Double Fortified Salt) - Food grade - Specification

9500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Description - Iron fortified iodized salt (Double fortified salt) shall be crushed crystalline solid; white or pale pink or light grey in colour, free from contamination with clay and other extraneous adulterants and impurities)	-	400	NA
3.2(Salt used for manufacture of double fortified salt - Moisture- Annex A of IS 7224)	-	750	NA
3.3(material shall pass through 4.00 mm IS sieve)	-	400	NA
3.4 - Table 1 - i(Moisture - Annex A of IS 7224)	-	500	NA
3.4 - Table 1 - ii(Water insoluble matter, on dry basis - A-4 of IS 253 )	-	500	NA
3.4 - Table 1 - iii(Chloride content (as NaCl), on dry basis - A-4 of IS 253)	-	750	NA
3.4 - Table 1 - iv(Matter insoluble in dilute HCl, on dry basis - Annex G)	-	500	NA
3.4 - Table 1 - v(Matter soluble in water other than sodium chloride, on dry basis - A-6 of IS 253)	-	500	NA
3.4 - Table 1 - vi(Iron content (as Fe) - Annex A)	-	1000	NA
3.4 - Table 1 - vii- a(Iodine content, Manufacturer’s level - Annex B)	-	750	NA
3.4 - Table 1 - viii - a(pH of 5 percent aqueous solution : For iron fortification through encapsulated ferrous fumarate - Annex C)	-	450	NA
3.4 - Table 1 - ix(Sulphate (as SO4) - A-8 of IS 253)	-	750	NA
3.4 - Table 1 - xi - a(Phosphorous (as P2O5) - For iron fortification through encapsulated ferrous fumarate - Annex D)	-	750	NA
3.4 - Table 1 - xii(Sodium hexa meta phosphate, on dry basis - Annex E)	-	750	NA
3.4 - Table 1 - x(Magnesium (as Mg), water soluble - A-7 of IS 253)	-	750	NA

31 Dec, 2026

-
Included w.e.f. 15-11-2022

256

IS 14542 (1998)

Partly skimmed milk powder specification

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table 1(i)(Moisture Type I (IS 11623))	-	800	Rs 250/- for Description (Cl 5.1) only, Rs 250/- for Flavour and taste (Cl 6.4).
Table 1(ii)(Total solids (milk solids and added salts) Type I (IS 11623))	-	500	NA
Table 1(iii)(Milk fat, Type I (IS I1722))	-	500	NA
Table 1(iv)(Insolubility index, a) Roller dried Type I (IS 12759))	-	500	NA
Table 1(iv)(Insolubility index, b) Spray dried Type I (IS 12759))	-	0	As above
Table 1(v)(Total ash Type I (Annex B of IS 14433 - Part 1))	-	800	NA
Table 1(vi)(Titratable acidity (as lactic acid) Type I (IS 11766))	-	800	NA
Cl 6.6.1(Bacterial Count (IS 5402))	-	800	NA
Cl 6.6.2(Coliform Count ((IS 5402))	-	800	NA
Table 1(i)(Moisture Type II (IS 11623))	-	0	As above
Table 1(ii)(Total solids (milk solids and added salts) Type II (IS 11623))	-	0	As above
Table 1(iii)(Milk fat, Type II (IS I1722))	-	0	As above
Table 1(iv)(Insolubility index, a) Roller dried Type II (IS 12759))	-	0	As above
Table 1(iv)(Insolubility index, b) Spray dried Type II (IS 12759))	-	0	As above
Table 1(v)(Total ash Type II (Annex B of IS 14433 - Part 1))	-	0	As above
Table 1(vi)(Titratable acidity (as lactic acid) Type II (IS 11766))	-	0	As above

31 Dec, 2026

-
Included w.e.f. 15-11-2022

257

IS 16326 (2015)

Ghee - Specification

12400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1(Texture)	-	200	NA
4.1.2(Colour)	-	200	NA
4.1.3(Odour and taste)	-	400	NA
4.1.9, Table 1(Milk fat)	-	500	NA
4.1.7(Baudouin test)	-	1000	NA
4.1.6(Phenolphthalein test)	-	1000	NA
4.1.6(tests for the presence of animal fats (other than milk fats))	-	2000	Including phytosterol acetate test
4.1.9, Table 1(Peroxide value)	-	1000	NA
4.1.10(Butyro-Refractometer reading at 40°C)	-	800	NA
4.1.10(Reichert Meissl value)	-	800	NA
4.1.10( Polenske value)	-	800	NA
4.11.1, Table 3(Free fatty acid as oleic acid)	-	1500	NA
4.11.1, Table 3(Moisture)	-	800	NA
4.1.9, Table 1(Coliform)	-	1000	NA
4.1.4(Excess Moisture)	-	400	NA

31 Dec, 2026

-
Included w.e.f. 15-11-2022

258

IS 7839 (1975)

Specification for dried ice-cream mix

6900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table-1(Moisture, percent by mass, max)	-	800	NA
Table-1(Milk fat, percent by mass, min)	-	800	NA
Table-1(Sucrose, percent by mass, MU)	-	800	NA
Table-1(Titratable acidity (as lactic acid), percent by mass, Max)	-	800	NA
Table-1(Solubility index, Max)	-	800	NA
Table-1(Milk proteins, percent by mass,min)	-	800	NA
Table-1(Bacterial count per gram, Max)	-	800	NA
Table-1(Coliform count per gram, Max)	-	800	NA
3.2(Description)	-	500	NA
3.5 Table 1 (i)(Moisture - IS 11623 / 16072)	-	0	As above
3.5 Table 1 (ii)(Milk Fat - IS 11721 OR 12249 ( part 2))	-	0	As above
3.5 Table 1 (iii)(Sucrose -Annex c of IS 2802 or 11764)	-	0	As above
3.5 Table 1 (iv)(Titratable acidity (as lactic acid) IS 11765)	-	0	As above
3.5 Table 1 (v)(Solubility index IS 12759)	-	0	As above
3.5 Table 1 (vi)(Milk Proteins IS 11917)	-	0	As above
3.5 Table:2(ii)(Coliform count - IS 5401(P-1))	-	0	As above
3.5 Table:2(i)(Aerobic Plate count - IS 5402(P-1))	-	0	As above
3.5Table:2(iii)(S.aureus - IS 5887(P-8/Sec-1):2002)	-	0	NA
3.5Table:2(iv)(Yeast & Mould count - IS 5403:1999)	-	0	NA
3.5 Table:2(v)(Salmonella sp.- IS 5887(P-3/Sec-1):2020)	-	0	NA
3.5 Table:2(vi)(L.monocytogenes - IS 14988(P-1):2020)	-	0	NA
3.5 Table:2(vii)(B.cereus - IS 5887(P-6):2012)	-	0	NA
3.5 Table:2(viii)(Sulphite reducing clostridia - ISO 15213:2003)	-	0	NA
3.5 Table:2(ix)(E.coli- IS 5887(P-1):1976)	-	0	NA

31 Dec, 2026

-
Included w.e.f. 15-11-2022

259

IS 5550 (1970)

Specification for burfi

6600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table-1(Moisture, percent by mass, Max)	-	800	NA
Table-1(fat, by mass,min)	-	800	NA
Table-1(lactose, min)	-	800	NA
Table-1(sucrose, min)	-	800	NA
Table-1(acidity, max (lactic acid))	-	800	NA
Cl. 5.4 (Table 1, S. no vi)(Standard plate)	-	800	NA
Table-1(yeast and mould count, max)	-	800	NA
Cl. 5.1(Body and Texture)	-	500	NA
Cl. 5.2(Colour and Flavour )	-	500	NA

31 Dec, 2026

-
Included w.e.f. 15-11-2022

260

IS 4883 (1980)

Settling tanks for ghee - Specification (First Revision)

6800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table-1(Total solid percent by mass, min)	-	2800	including Description- Rs 500/- appearance and colour- Rs 500/-, odour and flavour -Rs 500/- texture and consistency Rs 500/- Total solids- Rs 800/-
Table-1(Fat, percent by mass ( on dry basis ), Min)	-	800	NA
Table-1(Total ASH percent by mass, min)	-	800	NA
Table-1(Titratable acidity (as lactic acid ), percent by mass, Max)	-	800	NA
Table-1(Coliform count per gram, Max)	-	800	NA
Table-1(Yeast and mould count per gram, Max)	-	800	NA

31 Dec, 2026

-
Included w.e.f. 15-11-2022

261

IS 4238 (2020)

Sterilized and Ultra High Temperature Sterilized Milk — Specification ( First Revision )

8200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
TABLE 1 sl no 01(Creaming index, Max.)	-	1000	NA
TABLE 1 sl no 02(Nizo index)	-	1000	NA
TABLE 1 sl no 03(Turbidity)	-	800	NA
TABLE 1 sl no 04(Sterility pH variation on 7 days incubation, Max)	-	2000	NA
TABLE 1 sl no 05(Bacterial spores per ml, colonies, Max)	-	600	NA
TABLE 1 sl no 06(Lead, Max )	-	650	NA
TABLE 1 sl no 07(Arsenic, Max)	-	650	NA
TABLE 1 sl no 08(Aflatoxin M1, Max )	-	1500	NA
TABLE 1 sl no 04(Titratable acidity (variation on 7 days incubation), percent, Max)	-	0	Same as above - Sterility (pH variation)

31 Dec, 2026

-
Included w.e.f. 15-11-2022

262

IS 9584 (1980)

Specification for cheese powder

4200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table-1(Milk fat ( on dry basis ), per Milk fat ( on dry basis ), min )	-	800	NA
Table-1(Moisture, percent by mass, Max)	-	800	NA
Table-1(Salt ( added sodium chloride ), percent by mass, Max)	-	800	NA
Table-1(Coliform count per gram, max)	-	800	NA

31 Dec, 2026

-
Included w.e.f. 15-11-2022

263

IS 13688 (2020)

Packaged Pasteurized Milk — Specification ( Second Revision )

14500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table 2 (i), IS 5887 (Part 3)(Salmonella, m)	-	850	Total testing charges Rs 14500/- with Optional tests, Rs 11500/- for All tests excluding optional tests.
Table 2 (ii), IS 14988 (Part 2)(Listeria monocytogenes, m)	-	850	NA
Table 2 (iii), IS 5402 (Aerobic plate count, m)	-	850	NA
Table 2 (iv),IS 5401 (Part 1)(Coliform count, m)	-	850	NA
Table 3 (i), IS 1224 (Part 1) or IS 1479 (Part 2)(Milk fat)	-	800	NA
Table 3 (ii), IS 10083 or IS 12333(Milk solids-not-fat (SNF))	-	800	NA
Table 3 (iii), IS 8479 (Part 1) and IS 8479 (Part 2)(Phosphatase test)	-	800	NA
Table 3 (iv), IS 1479 (Part 1)(Neutralizer)	-	550	NA
Table 3 (v), IS 1479 (Part 1) or ISO 14637(Urea)	-	550	NA
Table 3 (vi), IS 12074(Lead)	-	800	NA
Table 3 (vii), IS 11124(Arsenic)	-	800	NA
Table 3 (viii), ISO 14501(Aflatoxin M)	-	1500	NA
Table 4 (i), IS 16639(Vitamin A )	-	1500	optional
Table 4 (ii), ISO 20636(Vitamin D)	-	1500	optional

31 Dec, 2026

-
Included w.e.f. 15-11-2022

264

IS 2833 (2019)

Aniline, technical - Specification (Second Revision)

Technical

11500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.2.1(Description)	-	200	NA
Cl.2.2.1(Relative Density at 27/27 0C)	-	1000	NA
Cl.2.2.2(Crystallizing Point)	-	1000	NA
Cl.2.2.3(Distillation Range)	-	2000	NA
Cl.2.2.4(Assay, percent by Nitrite value)	-	4000	NA
Cl.2.2.4(Assay, percent by GC)	-	0	Testing charges already mentioned above (at Assay, percent by Nitrite value) i.e. Rs 4000/-
Cl.2.2.5(Nitrobenzene content by GC, ppm)	-	2500	NA
Cl.2.2.6(Moisture content, percent by mass)	-	800	NA

31 Dec, 2026

-
Included w.e.f. 11-11-2021.

265

IS 10508 (2020)

Phosphoric Acid, Food Grade - Specification ( Second Revision )

Food Grade

13000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 3.3, Table-1 (ix)(Copper (as Cu) mg/kg, Max)	-	1000	NA
Clause 3.3, Table-1 (x)(Tin, mg/kg, Max)	-	1000	NA
Clause 3.3, Table-1 (xi)(Cadmium(as Cd), mg/kg, Max)	-	1000	NA
Clause 3.3, Table-1 (xii)(Mercury, mg/kg, Max)	-	1000	NA
Clause 3.3, Table-1 (xiii)(Molybdenum (as Mo),)	-	1000	NA
Clause 3.3, Table-1 (xiv)(Aluminium (as Al))	-	1000	NA

31 Dec, 2026

-
Included w.e.f. 11-11-2021.

266

IS 12685 (1989)

Pesticides - Pendimethalin, technical - Specification

4800 View breakup
Rs.4800/-(5% discount to BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Description)	-	500	NA
3.2 and 6.1 Table 1(Pendimethalin content)	-	1500	NA
3.2 and 6.1 Table 1(Material insoluble in acetone)	-	900	NA
3.2 and 6.1 Table 1(Acidity ( as HaSOh))	-	900	NA
3.2 and 6.1 Table 1(Alkalinity; as NaOH),)	-	0	Testing charges already mentioned above i.e. Rs 900/-
3.2 and 6.1 Table 1(Melting point)	-	1000	NA

31 Dec, 2026

-
Included w.e.f. 11-11-2021.

267

IS 14807 (2021)

Phosphate Solubilizing Bacterial Inoculant (PSBI) - Specification (First Revision)

13700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(4.2)(Phosphate solubilising bacterial cells)	-	4000	NA
4(4.4)(Contamination level at 10^5 dilution)	-	3500	NA
4(4.1)(Moisture)	-	700	NA
4(4.3)(PSBI Shall be Carrier based when passes through150 to 212 micron sieve)	-	1500	NA
4(4.5)(pH)	-	1000	NA
4(4.5)(Phosphate solubilising capacity)	-	3000	Phosphate solubilizing capacity as per Clause 4.6

31 Dec, 2026

-
REVISED VERSION OF IS 14807:2021 INCLUDED W.E.F. 11-11-2021

268

IS 15658 (2021)

Concrete Paving Blocks - Specification ( First Revision )

20000 View breakup
Rs.20000/- (5% discount to BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 7.3 & 9.1.4, Table 3, SI No. (v) b)(Average Flexural strength )	-	2500	Total testing charges Rs. 20000/- excluding Optional test as per Table no.3 , serial no. vi Freeze Thaw durability. Testing charges for Optional test as per Table no.3 , serial no. vi Freeze Thaw durability only are Rs. 18000/-.
Clause 7.3 & 9.1.4, Table 3, SI No. (i) b)(Water absorption (Average of three test specimens))	-	2500	NA
Clause 7.3 & 9.1.4, Table 3, SI No. (i) a)( Indivdual Water absorption)	-	0	NA
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) b)(Compressive strength (Average of eight test specimens))	-	4700	NA
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) a)(Indivdual Compressive strength (i))	-	0	NA
Clause 7.1.3 (Colour and Texture)	-	100	NA
Clause 7.2 & 9.1.3, Table 2, SI No. (ix)(Deviation from squareness)	-	2200	NA
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Indivdual Ratio of wearing face area and Plan area (Asw/Asp))	-	0	Testing charges already mentioned above at Deviation from squareness i.e. Rs. 2200/-
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Ratio of wearing face area and Plan area (Asw/Asp))	-	0	Testing charges already mentioned above at Deviation from squareness i.e. Rs. 2200/-
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Indivdual Plan Area (Asp))	-	0	Testing charges already mentioned above at Deviation from squareness i.e. Rs. 2200/-
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Plan Area (Asp))	-	0	Testing charges already mentioned above at Deviation from squareness i.e. Rs. 2200/-
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Indivdual Thickness of wearing Layer)	-	0	Testing charges already mentioned above at Deviation from squareness i.e. Rs. 2200/-
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Thickness of wearing Layer)	-	0	Testing charges already mentioned above at Deviation from squareness i.e. Rs. 2200/-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Depth)	-	0	Testing charges already mentioned above at Deviation from squareness i.e. Rs. 2200/-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Depth)	-	0	Testing charges already mentioned above at Deviation from squareness i.e. Rs. 2200/-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Width)	-	0	Testing charges already mentioned above at Deviation from squareness i.e. Rs. 2200/-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Width)	-	0	Testing charges already mentioned above at Deviation from squareness i.e. Rs. 2200/-
Clause 7.2, Table No. 2, SI No. (iv) (Indivdual Aspect Ratio, L/Th)	-	0	Testing charges already mentioned above at Deviation from squareness i.e. Rs. 2200/-
Clause 7.2, Table No. 2, SI No. (iv) (Aspect Ratio, L/Th)	-	0	Testing charges already mentioned above at Deviation from squareness i.e. Rs. 2200/-
Clause 7.2, Table No. 2, SI No. (iii) (Indivdual Thickness, Th)	-	0	Testing charges already mentioned above at Deviation from squareness i.e. Rs. 2200/-
Clause 7.2, Table No. 2, SI No. (iii) (Thickness, Th)	-	0	Testing charges already mentioned above at Deviation from squareness i.e. Rs. 2200/-
Clause 7.2, Table No. 2, SI No. (ii) (Indivdual Length, L)	-	0	Testing charges already mentioned above at Deviation from squareness i.e. Rs. 2200/-
Clause 7.2, Table No. 2, SI No. (ii) (Length, L)	-	0	Testing charges already mentioned above at Deviation from squareness i.e. Rs. 2200/-
Clause 7.3 & 9.1.4, Table 3, SI No. (v) a)(Indivdual Flexural strength (i))	-	0	Testing charges already mentioned above at Average Flexural strength i.e. Rs. 2500/-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) ii)(Wet Abrasion resistance (Average of three test specimens))	-	3000	NA
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) i)( Indivdual Wet Abrasion Resistance )	-	0	Testing charges already mentioned above at Wet Abrasion resistance (Average of three test specimens) i.e. Rs. 3000/-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) ii)(Dry Abrasion resistance (Average of three test specimens))	-	1700	NA
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) i)( Indivdual Dry Abrasion Resistance )	-	0	Testing charges already mentioned above at Dry Abrasion resistance (Average of three test specimens) i.e. Rs. 1700/-
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) b)(Average Tensile splitting strength )	-	2500	NA
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) a)(Indivdual Tensile splitting strength (i))	-	0	Testing charges already mentioned above
Clauses 7.1.2 & 9.1.2 (Visual Inspection)	-	700	NA
Clause 7.1.1 (General Quality)	-	100	NA
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 10 cycles)	-	18000	NA
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Cumulative Weight losses of specimen after 10, 25 & 50 cycles)	-	0	Testing charges already mentioned above

31 Dec, 2026

-
REVISED VERSION OF IS 15658:2021 INCLUDED W.E.F. 11-11-2021 Amendment No.1 Included w.e.f. 06.02.2023

269

IS 12299 (2021)

DAIRY WHITENER - SPECIFICATION First Revision

9050 View breakup
Rs.9050/- for all parameter, Rs.3650/- Chemical parameters, Rs.5400/- for microbiological

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table 6.4/clause no(i)( Moisture)	-	350	Rs 3800/- for Chemical parameters only, Rs 5250/- for Microbiological parameters only.
Table 6.4/clause no(ii)( Milk fat)	-	350	NA
Table 6.4/clause no(iii)(Milk protein)	-	350	NA
Table 6.4/clause no(iv)(Insolubility index)	-	350	NA
Table 6.4/clause no(v)(Total ash )	-	400	NA
Table 6.4/clause no(vi)(Acid insoluble ash)	-	400	NA
Table 6.4/clause no(viii)(Titrable acidity)	-	500	NA
Table 2 /clause no 6.4 SI.No.i)(Aerobic Plate count)	-	500	NA
Table 2 /clause no 6.4 SI.No.i)( coliform count)	-	500	NA
Table 2 /clause no 6.4 SI.No.i)(S.aureus)	-	500	NA
Table 2 /clause no 6.4 SI.No.i)(Yeast & Mould count)	-	500	NA
Table 2 /clause no 6.4 SI.No.i)(Salmonella spp.)	-	500	NA
Table 2 /clause no 6.4 SI.No.i)(Listeria monocytogenes)	-	650	NA
Table 2 /clause no 6.4 SI.No.i)(Bacillus cereus)	-	700	NA
Table 2 /clause no 6.4 SI.No.i)(Sulphite reducing clostridia)	-	700	NA
Table 2 /clause no 6.4 SI.No.i)(E.coli)	-	700	NA
6.1(Extraneous matter and added colours)	-	100	NA
Cl.6.4, Table 1, (ix)(Scorched Particle)	-	400	NA
Table 6.4/clause no(vii)(Total added sugar)	-	500	NA

31 Dec, 2026

-
REVISED VERSION OF IS 12299:2021 INCLUDED W.E.F. 11-11-2021

270

IS 6031 (1997)

Calcium propionate, food grade - Specification (First Revision)

9200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.0(DESCRIPTION)	-	500	NA
4.1(Identification Tests)	-	500	NA
4.2(pH )	-	800	NA
4.3, Table 1(Purity as C6H10O4Ca,)	-	1000	NA
4.3, Table 1(Moisture,)	-	800	NA
4.3, Table 1(Matter insoluble in water)	-	800	NA
4.3, Table 1(As)	-	800	NA
4.3, Table 1(Heavy metals)	-	800	NA
4.3, Table 1(Fe)	-	800	NA
4.3, Table 1(F)	-	800	NA
4.3, Table 1(Magnesium (as MgO))	-	800	NA

31 Dec, 2026

-
Included w.e.f. 11-11-2021.

Bureau of Indian Standards

The National Standards Body of India

IDMA LABORATORIES LIMITED, PANCHKULA

PLOT NO. 391 INDUSTRIAL AREA PHASE 1, PANCHKULA, Panchkula, Haryana, 134113

9888002607 testing@idmagroup.co.in

Scope List