BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

14136 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

6991

Stellar Test House, Noida

8171606

IS 16102 : Part 1 (2012)

Self - Ballasted led lamps for general lighting services: Part 1 safety requirements

23000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking)	-	200	-
6(Interchangeability)	-	800	-
7(Protection against accidental contact with live parts)	-	500	-
8(Insulation Resistance and Electric Strength)	-	2000	-
9(MECHANICAL STRENGTH)	-	800	-
10(cap temperature)	-	2000	-
11(Resistance to Heat)	-	800	-
12(Resistance to Flame and Ignition)	-	2000	-
13(Fault conditions)	-	800	-
14(Creepage distance and clearances)	-	500	-
4(General requirement and General test requirements)	-	500	-
5(Marking)	-	200	-
6(Interchangeability)	-	800	-
7(Protection against accidental contact with live parts)	-	500	-
8(Strength after humidity treatment)	-	800	-
9(Mechanical strength)	-	800	-
10(Cap temperature rise)	-	2000	-
11(Resistance to heat)	-	800	-
12(Resistance to flame and ignition)	-	2000	-
13(Fault conditions)	-	800	-
14(Creepage distances and clearances)	-	500	-
15(Selection of lamps for tests (Sampling))	-	500	-
16(Condition of compliance)	-	500	-
17(Tests)	-	400	-
Annex A(Ovreview of systems composed of LED modules and control gear)	-	500	-
Annex B(Lamps with operating position limitations)	-	500	-
4(GENERAL REQUIREMENT AND GENERAL TEST REQUIREMENTS)	-	500	-

26 Sep, 2028

-
included.w.e.f.17.10.2024

6992

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 7904 (2018)

High carbon steel wire rods - Specification (Second Revision)

Steel grades as mentioned in standard

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table-1,(Clauses 5.1 and 7.2)(S+P)	-	10000	-
Table-1,(Clauses 5.1 and 7.2)(Nitrogen)	-	10000	-
Table-1,(Clauses 5.1 and 7.2)(Titanium)	-	10000	-
Table-1,(Clauses 5.1 and 7.2)(Vanadium)	-	10000	-
Table-1,(Clauses 5.1 and 7.2)(Boron)	-	10000	-
Table-1,(Clauses 5.1 and 7.2)(Copper)	-	10000	-
Table-1,(Clauses 5.1 and 7.2)(Molybdenum)	-	10000	-
Table-1,(Clauses 5.1 and 7.2)(Nickel)	-	10000	-
Table-1,(Clauses 5.1 and 7.2)(Chromium)	-	10000	-
Table-1,(Clauses 5.1 and 7.2)(Aluminium)	-	10000	-
Table-1,(Clauses 5.1 and 7.2)(Silicon)	-	10000	-
Table-1,(Clauses 5.1 and 7.2)(Manganese)	-	10000	-
Table-1,(Clauses 5.1 and 7.2)(Phosphorous)	-	10000	-
Table-1,(Clauses 5.1 and 7.2)(Sulphor)	-	10000	-
Table-1,(Clauses 5.1 and 7.2)(Carbon)	-	10000	-
Cl 9 (Dimensions & tolerances)()	-	10000	-
9(Dimesion (Diameter))	-	10000	-
9(Dimesion (Out of Roundness))	-	10000	-
10(Mechanical Properties (Tensile strength))	-	10000	-
10(Mechanical Properties (Reduction in Area))	-	10000	-
12(Surface Defects)	-	10000	-
13(Decarburization Test)	-	10000	-
TABLE 1 NOTE 1(Any Validated test method)	-	10000	-
TABLE 1 NOTE 1(By Calculation)	-	10000	-
TABLE 1 NOTE 6()	-	10000	-
TABLE 1 NOTE 1(Any Validated test method)	-	10000	-
TABLE 1 NOTE 1(By Calculation)	-	10000	-
TABLE 1 NOTE 6(Tramp Element (Cr+ Ni+ Mo+ Cu))	-	10000	-
TABLE 1 NOTE 1(Any Validated test method)	-	10000	-
TABLE 1 NOTE 1(By Calculation)	-	10000	-
TABLE 1 NOTE 6()	-	10000	-
TABLE 1 NOTE 1(Niobium)	-	10000	-
TABLE 1 NOTE 1(Micro Alloy Element (Nb+V+Ti))	-	10000	-
TABLE 1 NOTE 6(Tramp Element (Cr+ Ni+ Mo+ Cu))	-	10000	-
TABLE 1 NOTE 6(Tramp Element (Cr+ Ni+ Mo+ Cu))	-	10000	-

31 Dec, 2026

-
exclusion cl.14, cl 15, cl cl.16(optional tests)

6993

Atmy Analytical Labs Pvt. Ltd., Faridabad

8167506

IS 4992 (2024)

Door Handles for Mortice Locks â Specification (Second Revision)

ALL

18800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-6.1(Fastening Elements and Spindle)	-	18800	-
Cl-6.2, Table-2 (i) a(Axial strength percent)	-	18800	-
Cl-6.2, Table-2 (i) b(Pre-load)	-	18800	-
Cl-6.2, Table-2 (i) c(Permanent deformation)	-	18800	-
Cl-6.3(Safety Requirements)	-	18800	-
Cl-6.4, Table-3 (1) a(Number of cycles)	-	18800	-
Cl-6.4, Table-3 (1) b(Force “P”)	-	18800	-
Cl-6.5(Corrosion Resistance)	-	18800	-
Cl-6.6(Fire Resistance Test)	-	18800	-
Cl-8(Marking)	-	18800	-

25 Feb, 2027

-
-

6994

COCHIN TEST HOUSE, KOCHI

6183816

IS 17042 : Part 1 (2020)

Diesel Engines — NOx Reduction Agent AUS 32 Part 1 Quality Requirements ( First Revision )

Diesel Exhaust fluid/Aqueous Urea solution

6500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5 and table 1(Urea content)	-	500	-
5 and table 1(Refractive index)	-	400	-
5 and table 1(Alkalinity as NH3)	-	250	-
5 and table 1(Biuret)	-	500	-
5 and table 1(Aldehydes)	-	500	-
5 and table 1(Insoluble matter)	-	500	-
5 and table 1(Phosphate (PO4))	-	350	-
5 and table 1(Aluminium)	-	400	-
5 and table 1(Calcium)	-	375	-
5 and table 1(Chromium)	-	375	-
5 and table 1(Copper)	-	375	-
5 and table 1(Iron)	-	375	-
5 and table 1(Potassium)	-	375	-
5 and table 1(Magnesium)	-	375	-
5 and table 1(Sodium)	-	375	-
5 and table 1(Nickel)	-	375	-
5 and table 1(Zinc)	-	375	-

03 Feb, 2028

-
-

6995

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 5872 (1990)

Cold rolled steel strips (Box Strappings) - Specification

COLD ROLLED STEEL STRIPS

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 6(UTM)	-	8000	-
Cl 7(Bending To Both Side At 90°, Then Straight)	-	8000	-
Cl 9(Workmanship)	-	8000	-
Cl 10(Width & Thickness)	-	8000	-
Cl 11(Workmanship)	-	8000	-
Cl 12(Coating)	-	8000	-
Cl 6(UTM)	-	8000	-
Cl 7(Bending To Both Side At 90°, Then Straight)	-	8000	-
Cl 9(Workmanship)	-	8000	-
Cl 10(Width & Thickness)	-	8000	-
Cl 11(Workmanship)	-	8000	-
Cl 12(Coating)	-	8000	-
Cl 6(UTM)	-	8000	-
Cl 7(Bending To Both Side At 90°, Then Straight)	-	8000	-
Cl 9(Workmanship)	-	8000	-
Cl 10(Width & Thickness)	-	8000	-
Cl 11(Workmanship)	-	8000	-
Cl 12(Coating)	-	8000	-
Cl. 10.2(Thickness)	-	8000	-
Cl. 6 Table 3(Elongation at 50 mm gauge length)	-	8000	-
Cl 12(Coating)	-	8000	-
Cl 11(Workmanship)	-	8000	-
Cl 10(Width & Thickness)	-	8000	-
Cl 9(Workmanship)	-	8000	-
Cl 7(Bending To Both Side At 90°, Then Straight)	-	8000	-
Cl 6(UTM)	-	8000	-
5(Chemical Composition)	-	8000	-
Cl 6(UTM)	-	8000	-
Cl 7(Bending To Both Side At 90°, Then Straight)	-	8000	-
Cl 9(Workmanship)	-	8000	-
Cl 10(Width & Thickness)	-	8000	-
Cl 11(Workmanship)	-	8000	-
Cl 12(Coating)	-	8000	-
5.0 & 5.1 , Table 1 & 2(Carbon)	-	8000	-
5.0 & 5.1 , Table 1 & 2(Manganese)	-	8000	-
5.0 & 5.1 , Table 1 & 2(Sulphur)	-	8000	-
5.0 & 5.1 , Table 1 & 2(Phosphorus)	-	8000	-
5.0 & 5.1 , Table 1 & 2(Niobium)	-	8000	-
5.0 & 5.1 , Table 1 & 2(Vanadium)	-	8000	-
5.0 & 5.1 , Table 1 & 2(Titanium)	-	8000	-
5.0 & 5.1 , Table 1 & 2(Boron)	-	8000	-
5.0 & 5.1 , Table 1 & 2(Micro Alloying Elements)	-	8000	-
6.0 & Table3(Tensile Strength - IS: 1608(P1))	-	8000	-
6.0 & Table3(Elongation on 50mm GL-IS: 1608(P1))	-	8000	-
10.0 & 10.2(Width -SOP MT-23)	-	8000	-
10.0 & 10.2(Thickness -SOP MT-23)	-	8000	-
11.0 & 11.1(Surface finish - Visual)	-	8000	-
12.0 & 12.1(Corrosion Resistance - IS 9844)	-	8000	-

31 Dec, 2026

-
including w.e.f.09.10.2024

6996

DELHI TEST HOUSE, Azadhpur

8131406

IS 4990 (2024)

PLYWOOD FOR CONCRETE SHUTTERING WORKS SPECIFICATION (Fourth Revision)

ALL

32000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-7.1(Dimensions -length)	-	1000	COMPLETE TESTING CHARGES:-32000/-
Cl-7.2(Thickness)	-	500	COMPLETE TESTING CHARGES:-32000/-
Cl-7.3(Squareness)	-	1000	COMPLETE TESTING CHARGES:-32000/-
Cl-10.3(Moisture Content)	-	1000	COMPLETE TESTING CHARGES:-32000/-
Cl-10.4.1(Glue Adhesion in Dry State - Glue Shear Strength)	-	2000	COMPLETE TESTING CHARGES:-32000/-
Cl-10.4.2(Glue Adhesion in Dry State - Adhesion of Plies)	-	1000	COMPLETE TESTING CHARGES:-32000/-
Cl-10.5, 10.5.1(Resistance to Water Test)	-	2000	COMPLETE TESTING CHARGES:-32000/-
Cl-10.5.1.1(Water Resistance Test-Glue shear strength)	-	2000	COMPLETE TESTING CHARGES:-32000/-
Cl-10.5.1.2(Water Resistance Test-Adhesion of plies)	-	1000	COMPLETE TESTING CHARGES:-32000/-
Cl-10.6(Water resistance test (Concrete shuttering Plywood))	-	1000	COMPLETE TESTING CHARGES:-32000/-
Cl-10.7.1, Table-2(Mycological Test- Glue shear strengt)	-	4500	COMPLETE TESTING CHARGES:-32000/-
Cl-10.7.2(Mycological Test- Adhesion of plies)	-	1000	COMPLETE TESTING CHARGES:-32000/-
Cl-10.8(Tensile Strength)	-	2500	COMPLETE TESTING CHARGES:-32000/-
Cl-10.9, Table-3 (i)(Along (parallel to the grain direction of the face veneer))	-	1500	COMPLETE TESTING CHARGES:-32000/-
Cl-10.9, Table-3 (ii)(Across (perpendicular to the grain direction of the face veneer))	-	1500	COMPLETE TESTING CHARGES:-32000/-
Cl-10.10, Table-4 (i) a(Wet Bending Strength -Modulus of Elasticity (MOE),- Average)	-	2000	COMPLETE TESTING CHARGES:-32000/-
Cl-10.10, Table-4 (i) b(Wet Bending Strength - Modulus of Elasticity (MOE),- Minimum individual)	-	2500	COMPLETE TESTING CHARGES:-32000/-
Cl-10.11(Retention of Preservative)	-	1000	COMPLETE TESTING CHARGES:-32000/-
Cl-10.12(Formaldehyde Content Test)	-	2500	COMPLETE TESTING CHARGES:-32000/-
Cl-8.1, 8.2(Workmanship and finish)	-	500	COMPLETE TESTING CHARGES:-32000/-

17 Jun, 2027

-
Included w.e.f 15.10.2024 Excluding Cl-10.13 (Steady-State Formaldehyde Emission Test) Cl-10.5.2 (Water Resistance Test (Alternate method)

6997

Delta Testing and Research Laboratories Private Limited (C5)

9179506

IS 6911 (2017)

Stainless steel plate, sheet and strip - Specification (Second Revision)

All Grade / Type / Size / Designation

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 7.1 & 7.2 Table 1(Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7.1 & 7.2 Table 1(Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7.1 & 7.2 Table 1(Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7.1 & 7.2 Table 1(Nickel -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7.1 & 7.2 Table 1(Chromium -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7.1 & 7.2 Table 1(Molybdenum -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7.1 & 7.2 Table 1(Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl. 7.1 & 7.2 Table 1(Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7.1 & 7.2 Table 1(Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7.1 & 7.2 Table 1(Copper -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7.1 & 7.2 Table 1(Others-IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7.1 & 7.2 Table 1(Titanium-IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7.1 & 7.2 Table 1(Niobium-IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl.12(Corrosion Resistance- IS 10461(Part1))	-	4000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl.12(Corrosion Resistance- IS 10461(Part2))	-	4000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
6(Freedom from defects , IS 6911)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
10.1,Table 4&Table 6(Tensile Test - IS 1608(Pt -1))	-	2500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
10.2,Table 4&Table 5(Hardness Test- IS 1500(Pt -1),IS 1501 (Pt-1),IS 1586 (Pt -1))	-	2500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
10.3(Bend Test - IS 1599)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
11,Table 7(Erichsen cupping test-IS 10175)	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
15(Surface Finish)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
17(Dimension and tolerance)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
10.1 Amd 2(Yeild Strength)	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
10.1 Amd 2(0.2 Percent Proof Stress)	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
10.1 Amd 2(Elongation)	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Clause 17 , Table 9 to Table 19(Dimension (Length))	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Clause 17 , Table 9 to Table 19(Dimension (Width))	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Clause 17 , Table 9 to Table 19(Dimension (Thickness))	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Clause 17 , Table 9 to Table 19(Flatness)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Clause 17 , Table 9 to Table 19(Camber)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Table 1(Any Instrumental Method/Chemical Method)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Table 1, Amendment 2(Any Instrumental Method/Chemical Method)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Table 1, Amendment 2(Any Instrumental Method/Chemical Method)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Table 1, Amendment 2(Any Instrumental Method/Chemical Method)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Table 1, Amendment 2(Any Instrumental Method/Chemical Method)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Table 1, Amendment 2(Any Instrumental Method/Chemical Method)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
10.1 Amd 2(Yeild Strength)	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
10.1 Amd 2(0.2 Percent Proof Stress)	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
10.1 Amd 2(Elongation)	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Clause 17 , Table 9 to Table 19(Dimension (Length))	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Clause 17 , Table 9 to Table 19(Dimension (Width))	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Clause 17 , Table 9 to Table 19(Dimension (Thickness))	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Clause 17 , Table 9 to Table 19(Flatness)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Clause 17 , Table 9 to Table 19(Camber)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Table 1(Any Instrumental Method/Chemical Method)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Table 1, Amendment 2(Any Instrumental Method/Chemical Method)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Table 1, Amendment 2(Any Instrumental Method/Chemical Method)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Table 1, Amendment 2(Any Instrumental Method/Chemical Method)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Table 1, Amendment 2(Any Instrumental Method/Chemical Method)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Table 1, Amendment 2(Any Instrumental Method/Chemical Method)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
10.1 Amd 2(Yeild Strength)	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
10.1 Amd 2(0.2 Percent Proof Stress)	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
10.1 Amd 2(Elongation)	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Clause 17 , Table 9 to Table 19(Dimension (Length))	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Clause 17 , Table 9 to Table 19(Dimension (Width))	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
10.1 Amd 2(Yeild Strength)	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
10.1 Amd 2(0.2 Percent Proof Stress)	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
10.1 Amd 2(Yeild Strength)	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
10.1 Amd 2(0.2 Percent Proof Stress)	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
10.1 Amd 2(Elongation)	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Clause 17 , Table 9 to Table 19(Dimension (Length))	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Clause 17 , Table 9 to Table 19(Dimension (Width))	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Clause 17 , Table 9 to Table 19(Dimension (Thickness))	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Clause 17 , Table 9 to Table 19(Flatness)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Clause 17 , Table 9 to Table 19(Camber)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Table 1(Any Instrumental Method/Chemical Method)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Table 1, Amendment 2(Any Instrumental Method/Chemical Method)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Table 1, Amendment 2(Any Instrumental Method/Chemical Method)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Table 1, Amendment 2(Any Instrumental Method/Chemical Method)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Table 1, Amendment 2(Any Instrumental Method/Chemical Method)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Table 1, Amendment 2(Any Instrumental Method/Chemical Method)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Table 1, Amendment 2(Any Instrumental Method/Chemical Method)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
4(Supply of Material)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
8(Heat Treatment)	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
19(Marking)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
5(Manufacture)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
10.1 Amd 2(Yeild Strength)	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
10.1 Amd 2(0.2 Percent Proof Stress)	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
10.1 Amd 2(Elongation)	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Clause 17 , Table 9 to Table 19(Dimension (Length))	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Clause 17 , Table 9 to Table 19(Dimension (Width))	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Clause 17 , Table 9 to Table 19(Dimension (Thickness))	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Clause 17 , Table 9 to Table 19(Flatness)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Clause 17 , Table 9 to Table 19(Camber)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Table 1(Alumium)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Table 1, Amendment 2(Zirconium)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Table 1, Amendment 2(Tungstun)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Table 1, Amendment 2(Tungstun)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Table 1, Amendment 2(Ce)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Table 1, Amendment 2(Cobalt)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Table 1, Amendment 2(Ta)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
5.1 - 1(Carbon)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
5.1 - 1(Sulphur)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
5.1 - 1(Phosphorus)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
5.1 - 1(Manganese)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
5.1 - 1(Silicon)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
5.1 - 1(Nitrogen)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
5.1 - 1(Copper)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
5.1 - 1(Titanium)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
5.1 - 1(Aluminium)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
5.1 - 1(Niobium)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
5.1 - 1(Nickel)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
5.1 - 1(Chromium)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
5.1 - 1(Molybdenum)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
6(Freedom from defect)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
10.1 - 4(Tensile Test)	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
10.1 - 4(Yield strength)	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
10.1 - 4(Elongation % on 50mm)	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
10.2(Hardness Test)	-	2500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
10.3(Bend Test)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
11(Erichsen Cupping Test)	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
17(Dimension and tolerance)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
12(Corrosion resistance)	-	4000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
5.1 - 1(Carbon)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
5.1 - 1(Sulphur)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
5.1 - 1(Phosphorus)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
5.1 - 1(Manganese)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
5.1 - 1(Silicon)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
5.1 - 1(Nitrogen)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
5.1 - 1(Copper)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
5.1 - 1(Titanium)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
5.1 - 1(Aluminium)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
5.1 - 1(Niobium)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
5.1 - 1(Nickel)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
5.1 - 1(Chromium)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
5.1 - 1(Molybdenum)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
6(Freedom from defect)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
10.1 - 4(Tensile Test)	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
10.1 - 4(Yield strength)	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
10.1 - 4(Elongation % on 50mm)	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
10.2(Hardness Test)	-	2500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
10.3(Bend Test)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
11(Erichsen Cupping Test)	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
17(Dimension and tolerance)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
12(Corrosion resistance)	-	4000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.

21 Aug, 2027

-
Included w.e.f. 09.09.2024

6998

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 2879 (1998)

Mild steel for metal arc welding electrodes - Specification (Third Revision)

MILD STEEL FOR METAL ARC WELDING ELECTRODES

11500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7(Workmanship)	-	11500	-
Cl 8 & 9(Diameter)	-	11500	-
Cl 7(Workmanship)	-	11500	-
Cl 8 & 9(Diameter)	-	11500	-
Cl 7(Workmanship)	-	11500	-
Cl 8 & 9(Diameter)	-	11500	-
6(Carbon %)	-	11500	-
6(Manganese %)	-	11500	-
6(Phosphorus %)	-	11500	-
6(Sulphur %)	-	11500	-
6(Silicon %)	-	11500	-
6( Copper %)	-	11500	-
6( Aluminium %)	-	11500	-
6( Nb)	-	11500	-
6(V)	-	11500	-
6( Ti)	-	11500	-
6(Cr)	-	11500	-
6(Mo)	-	11500	-
6(Ni)	-	11500	-
6(Cr+ Mo+ Ni)	-	11500	-
6(Carbon %)	-	11500	-
6(Manganese %)	-	11500	-
6(Phosphorus %)	-	11500	-
6(Sulphur %)	-	11500	-
6(Silicon %)	-	11500	-
6( Copper %)	-	11500	-
6( Aluminium %)	-	11500	-
6(V)	-	11500	-
6( Ti)	-	11500	-
6(Cr)	-	11500	-
6(Mo)	-	11500	-
6(Ni)	-	11500	-
6(Cr+ Mo+ Ni)	-	11500	-
6(Carbon %)	-	11500	-
6(Manganese %)	-	11500	-
6(Phosphorus %)	-	11500	-
6(Sulphur %)	-	11500	-
6(Silicon %)	-	11500	-
6( Copper %)	-	11500	-
6( Aluminium %)	-	11500	-
6( Nb)	-	11500	-
6(V)	-	11500	-
6( Ti)	-	11500	-
6(Cr)	-	11500	-
6(Mo)	-	11500	-
6(Ni)	-	11500	-
6(Cr+ Mo+ Ni)	-	11500	-
Cl. 9.2(Maximum Difference between 2 readings taken at any 2 diameters across cross section)	-	11500	-
Cl. 8,9(Width across flat)	-	11500	-
Cl. 8,9(Length)	-	11500	-
Cl. 5.2(Macro Examination)	-	11500	-
Cl 8 & 9(Diameter)	-	11500	-
Cl 7(Workmanship)	-	11500	-
Cl 7(Workmanship)	-	11500	-
Cl 8 & 9(Diameter)	-	11500	-
9.2 (a)(Width Across Flat)	-	11500	-
9.2 (b)(Diameter Difference)	-	11500	-
6( Nb)	-	11500	-

31 Dec, 2026

-
including w.e.f.09.10.2024

6999

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 18573 (2024)

Cold formed welded carbon steel square and rectangular hollow sections for mechanical, general engineering and decorative purposes ï¿½ Specification

14900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 3.0(Types)	-	14900	For complete testing
Clause.4.0(Carbon)	-	14900	For complete testing
Clause.4.0(Sulphur)	-	14900	For complete testing
Clause.4.0(Sulphur)	-	14900	For complete testing
Clause.4.0(Phosphorus)	-	14900	For complete testing
Clause.4.0(Silicon)	-	14900	For complete testing
Clause.4.0(Manganese)	-	14900	For complete testing
Clause.5.0(Supply of Material)	-	14900	For complete testing
Clause.5.0(Supply of Material)	-	14900	For complete testing
Clause.6.0(Workmanship)	-	14900	For complete testing
Clause.7.0(Straightness)	-	14900	For complete testing
Clause.8.0(Basis of Calculation)	-	14900	For complete testing
Clause.9.0(Length)	-	14900	For complete testing
Clause.10.0(Dimensions and properties)	-	14900	For complete testing
Clause.10.0(Dimensions and properties)	-	14900	For complete testing
Clause.11.0(General)	-	14900	For complete testing
Clause.11.0(Outside Dimension)	-	14900	For complete testing
Clause.11.0(Thickness)	-	14900	For complete testing
Clause.11.0(Thickness)	-	14900	For complete testing
Clause.11.0(Concavity and Convexity)	-	14900	For complete testing
Clause.11.0(Squareness of Sides)	-	14900	For complete testing
Clause.11.0(External Corner Radiius)	-	14900	For complete testing
Clause.11.0(Straightness and twist)	-	14900	For complete testing
Clause.12.0(Dimension Tolerances)	-	14900	For complete testing
Clause.12.0(Dimension Tolerances)	-	14900	For complete testing
Clause.13.0(Surface Protection)	-	14900	For complete testing
Clause.14.0(Testing)	-	14900	For complete testing
Clause.15.0(Tensile test)	-	14900	For complete testing
Clause.15.0(Yield strength)	-	14900	For complete testing
Clause.15.0(Elognation Percent)	-	14900	For complete testing
Clause.18.0(Marking)	-	14900	For complete testing
6(Workmanship)	-	14900	For complete testing
10(Dimensions and Properties)	-	14900	For complete testing
11(Measurement of Shape and Size)	-	14900	For complete testing
12(Dimensions and Tolerances)	-	14900	For complete testing
13(Surface Protection)	-	14900	For complete testing
15(Tensile Test)	-	14900	For complete testing

04 Dec, 2028

-
Included w.e.f. 18.02.2025

7000

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 1171 (2011)

Ferromanganese - Specification (Fifth Revision)

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause-4(Grades)	-	14000	For complete testing
Clause-6(Supply of Materials)	-	14000	For complete testing
Clause-7.1(Constitution of Consignment)	-	14000	For complete testing
Clause-7, Table-1, S.No-3(Mn)	-	14000	For complete testing
Clause-7.2.1,Table-1, S.No-4(C)	-	14000	For complete testing
Clause-7.2.1, Table-1, S.No-5(Si Max)	-	14000	For complete testing
Clause-7.2.1,Table-1, S.No-6(S Max)	-	14000	For complete testing
Clause-7.2.1,Table-1, S.No-7(P Max)	-	14000	For complete testing
Clause-8(Size Range)	-	14000	For complete testing
Clause-12(Marking)	-	14000	For complete testing

04 Dec, 2028

-
Included w.e.f. 18.02.2025

7001

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 1470 (2013)

Silicomanganese - Specification (Fourth Revision)

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause-4(Grades)	-	14000	For complete testing
Clause-6(Supply of Materials)	-	14000	For complete testing
Clause-7.1(Constitution of Consignment)	-	14000	For complete testing
Clause-7.2.1(Mn, Max)	-	14000	For complete testing
Clause-7.2.1(Si, Max)	-	14000	For complete testing
Clause-7.2.1(Phosphorus)	-	14000	For complete testing
Clause-7.2.1(Sulphur)	-	14000	For complete testing
Clause-7.2.4(Established instrumental/chemical method)	-	14000	For complete testing
Clause-8(Size Designation)	-	14000	For complete testing
Clause-10(Sampling)	-	14000	For complete testing
Clause-12(Marking)	-	14000	For complete testing

04 Dec, 2028

-
Included w.e.f. 18.02.2025

7002

Delta Testing and Research Laboratories Private Limited (C5)

9179506

IS 3589 (2001)

Steel pipes for water and sewage (168.3 To 2540 Mm Outside Diameter) - Specification (Third Revision)

All Grade / Type / Size / Designation

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1 Table 2 Table 3(Carbon Content IS 228)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
8.1 Table 2 Table 3(Carbon Content IS 228)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
8.1 Table 2 Table 3(Carbon Content IS 228)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
8.1 Table 2 Table 3(Manganese Content IS 228)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
8.1 Table 2 Table 3(Manganese Content IS 228)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
8.1 Table 2 Table 3(Manganese Content IS 228)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
8.1 Table 2 Table 3(Phosphorus Content IS 228)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
8.1 Table 2 Table 3(Sulphur Content IS 228)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
9.3(Guided bend test(For SAW Pipes))	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
10(Hydaulic pressure test)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
11.1, Table 5.(Outside Diameter (OD))	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
11.1, Table 5.(Thickness)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
11.1, Table 5.(Mass)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
12.3.3(Ovality)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
12.5(Strightness)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
14.1(Visual inspection, Appearance and Workmanship)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
14.2(Visual inspection, Appearance and Workmanship)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
14.3(Visual inspection, Appearance and Workmanship)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
14.4(Visual inspection, Appearance and Workmanship-Dent Depth(below 610 mm OD))	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
14.4(Visual inspection, Appearance and Workmanship-Dent Depth(Above 610 mm OD))	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
14.4(Visual inspection, Appearance and Workmanship-Dent Length)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
14.4(Visual inspection, Appearance and Workmanship-Dent Length)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
8.1(CE)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
8.1(CE)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
8.1(CE)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
9.3(Guided Bend Test (for SAW Pipes))	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
9.2.3(Flattening Test for seamless pipes)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
9.2.1(Flattening test for ERW pipes )	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1(Tensile test-Yield Strength)	-	1500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1(Tensile test-Strength)	-	1500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1(Tensile test- Elongation)	-	1500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
18(Marking)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
18(Marking)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.

21 Aug, 2027

-
Included w.e.f. 09.09.2024

7003

DELHI TEST HOUSE, Azadhpur

8131406

IS 303 (2024)

Plywood for General Purposes â Specification (Fourth Revision)

ALL

29000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.2, Table- 1 (i)(Blister)	-	100	TESTING CHARGES - Rs.29000/-
Cl-5.2, Table- 1 (ii)(Checks)	-	100	TESTING CHARGES - Rs.29000/-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	100	TESTING CHARGES - Rs.29000/-
Cl-5.2, Table- 1 (iv)(Dote)	-	100	TESTING CHARGES - Rs.29000/-
Cl-5.2, Table- 1 (v)(Insect hole)	-	100	TESTING CHARGES - Rs.29000/-
Cl-5.2, Table- 1 (vi)(Joints)	-	100	TESTING CHARGES - Rs.29000/-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	100	TESTING CHARGES - Rs.29000/-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	100	TESTING CHARGES - Rs.29000/-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	100	TESTING CHARGES - Rs.29000/-
Cl-5.2, Table- 1 (xi)(Patches)	-	100	TESTING CHARGES - Rs.29000/-
Cl-5.2, Table- 1 (xii)(Splits)	-	100	TESTING CHARGES - Rs.29000/-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	100	TESTING CHARGES - Rs.29000/-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	100	TESTING CHARGES - Rs.29000/-
Cl-8.1(Dimensions -length)	-	1000	TESTING CHARGES - Rs.29000/-
Cl-8.2(Thickness of the plywood boards)	-	1000	TESTING CHARGES - Rs.29000/-
Cl-8.3(Squareness)	-	1000	TESTING CHARGES - Rs.29000/-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	5000	TESTING CHARGES - Rs.29000/-
Cl-11.3.2(Mycological Test)	-	10000	TESTING CHARGES - Rs.29000/-
Cl-11.4(Moisture Content)	-	2000	TESTING CHARGES - Rs.29000/-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	3000	TESTING CHARGES - Rs.29000/-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	3000	TESTING CHARGES - Rs.29000/-
Cl-11.6(Formaldehyde Content Test)	-	1500	TESTING CHARGES - Rs.29000/-
Cl-5.1(Classification by appearance)	-	500	TESTING CHARGES - Rs.29000/-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	100	TESTING CHARGES - Rs.29000/-

17 Jun, 2027

-
Included w.e.f 15.10.2024 Excluding Cl-11.7 (Steady-State Formaldehyde Emission Test)

7004

Stellar Test House, Noida

8171606

IS 14255 (1995)

Aertal bunched cables - For working voltages up to and including 1100 Volts - Specification

10900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Phase/Street Lighting conductor)	-	100	-
4.2(Messenger (Neutral Conductor or Otherwise))	-	100	-
5.1(Insulation)	-	100	-
6.1(Flexibility class)	-	100	-
6.2(Compactness)	-	100	-
6.2(No of strands)	-	100	-
6.2(Surface)	-	100	-
6.3(Protective barrier)	-	100	-
6.4(size of street lighting conductor)	-	100	-
6.5(Size of messenger conductor )	-	100	-
6.6(Joints in messenger conductor )	-	100	-
6.6(Direction of outer layer)	-	100	-
7.1(Insulation)	-	100	-
7.2( Thickness of insulation)	-	100	-
7.3(Tolerance on thickness of insulation )	-	100	-
7.4(Aplication of the insulation )	-	100	-
7.5(Colour of the insulation )	-	100	-
8.1(Core identification)	-	100	-
8.2(Core identification)	-	100	-
8.3(Identification by other means)	-	100	-
9.1(Assembly (Laying up))	-	200	-
9.2(Assembly (Laying up))	-	100	-
9.3(Direction of lay)	-	200	-
10.1 a) i)(Tests on phase/street light conductor: tensile test - Test method IS10810:Part 2)	-	400	-
10.1 a) ii)(Wrapping test - 10810: Part 3)	-	400	-
10.1 a) iii)(Resistance test - IS10810: Part 5)	-	400	-
10.1 b) i)(Test on messenger conductor: Breaking load - IS 10810: Part 2)	-	400	-
10.1 b) ii)(Test on messenger conductor: Elongation test - Cl 11.3)	-	400	-
10.1 b) iii)(Test on messenger conductor: Resistance test - IS 10810: Part 5)	-	500	-
10.1 c) i)(Physical tests for XLPE Insulation: Tensile strength - IS 10810: Part 7)	-	200	-
10.1 c) i)(Physical tests for XLPE Insulation: elongation at break - IS 10810: part 7)	-	200	-
10.1 c) ii)(Ageing in air oven : Tensile strength variation - IS 10810:Part 11)	-	200	-
10.1 c) ii)(Ageing in air oven : Elongation variation- IS 10810: Part 11)	-	200	-
10.1 c) iii)(Hot set test: Elongation under load - IS 10810: Part 30)	-	200	-
10.1 c) iii)(Hot set test: Permanent elongation (set) after cooling - IS 10810: Part 30)	-	200	-
10.1 c) iv)(Shrinkage test : Shrinkage - 10810:Part 12)	-	200	-
10.1 c) iv)(Shrinkage test : Crack Observed - 10810:Part 12)	-	200	-
10.1 c) v)(Water ahsorption (Gravimetric) - IS 10810: Part 33 )	-	500	-
10.1 d) i)(Physical test for PE insulation: Tensile strength - IS 10810: Part 7 )	-	500	-
10.1 d) i)(Physical test for PE insulation: elongation at break - IS 10810: Part 7)	-	400	-
10.1 d) ii)(Melt flow index- IS 10810: Part 23)	-	400	-
10.1 d) iv)(Vicat softening point -IS 10810: Part 22)	-	500	-
10.1 d) v)(Environmental stress cracking -IS 10810:Part29)	-	500	-
10.1 f)(Insulation resistance (Volume resistivity) test a) volume resistivity at 27°C - IS 10810: Part 43)	-	400	-
10.1 f)(Insulation resistance (Volume resistivity) test b) volume resistivity at 70°C - IS 10810: Part 43)	-	400	-
10.1 g)(High voltage test - IS10810:Part 45)	-	400	-
11.4(Bending Test on the Completed Cable ( Optional) )	-	400	-
11.4(Bending Test on the Completed Cable ( Optional))	-	400	-
10.1 d) iii)(Carbon Black Content)	-	500	-

26 Sep, 2028

-
including w.e.f 09.10.2024

7005

Delta Testing and Research Laboratories Private Limited (C5)

9179506

IS 15909 (2020)

PVC Geomembranes for Lining - Specification ( Second Revision )

All type of Grade / Type / Size / Designation etc.

165000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.0(Types)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5,Table 1(Requirements)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5,Table 1(Length )	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5,Table 1(Width )	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5,Table 1(Thickness)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5,Table 1(Specific Gravity)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5,Table 1( Tensile strength (Longitudinal) ,kg/m2)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5,Table 1(Elongation at break (Longitudinal),250 % ,Min)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5,Table 1( Tensile strength (Transverse) ,kg/m2)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5,Table 1(Elongation at break (Transverse),250 % ,Min)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5,Table 1(Tear resistance (machine direction))	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5,Table 1(Tear resistance (Cross direction))	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5,Table 1(Index puncture resistance,N)	-	5000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5,Table 1(Low temperature crack resistance)	-	5000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5,Table 1(Hydrostatic resistance,kg/cm2,Min)	-	8000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5,Table 1(Seam strength,kg,Min)	-	3500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5,Table 1(Volatile Loss ,% ,Max)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5,Table 1(Peel strength,kN/m,Min)	-	5000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5,Table 1(Resistance to soil burial)	-	5000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5,Table 1(Tensile strength (Longitudinal),% change)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5,Table 1(Elongation at break (Longitudinal),% change)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5,Table 1(Tensile strength (Transverse),% change)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5,Table 1(Elongation at break (Transverse),% change)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5,Table 1(Water extraction,% loss in weight)	-	5000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5,Table 1(Stability to ultraviolet radiations,% retension in Tensile strength)	-	50000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5,Table 1(Stability to ultraviolet radiations,% retension in Elongation at break)	-	50000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.0(Dimensions and tolerances)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5, Table-2(Length)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5, Table-2(Width)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5, Table-2(Thickness at 20kPa pressure)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5, Table-2(Tensile Strength (Longitudinal))	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5, Table-2(Tensile Strength (Transverse))	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5, Table-2(Elongation at break (Longitudinal))	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5, Table-2(Elongation at break (Transverse))	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5, Table-2(Tear Strength (Machine direction))	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5, Table-2(Tear Strength (Cross direction))	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5, Table-2(Behaviour during perforation)	-	4500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5, Table-2(Height of fall without perforation)	-	2000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5, Table-2(Cold crack resistance at low temperature)	-	5000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5, Table-2(Hydrostatic Pressure Resistance)	-	8000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5, Table-2(Dimensional Stability at 80 degree C)	-	15000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5, Table-2(Change in length after heating)	-	3500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5, Table-2(Change in width after heating)	-	3500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5, Table-2(Resistance to acid and alkali)	-	5000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5, Table-2(Strength of welded seam shear resistance)	-	3500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5, Table-2(Resistance to static puncturing)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5, Table-2(Horizontal rate of burning)	-	15000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5, Table-2(Vertical rate of burning)	-	15000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.0(Colour ,Surface characteristics and fredom from defects)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1(Colour ,Surface characteristics and fredom from defects)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2(Colour ,Surface characteristics and fredom from defects)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5,Table 2(Specific Gravity)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

21 Aug, 2027

-
Included w.e.f 09.04.2025

7006

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 1364 : Part 6 (2018)

Hexagon Head Bolts, Screws and Nuts of Product Grades A and B Part 6 Hexagon Nuts, Style 2 ( First Revision )

Hexagon Nuts, Style 2

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Dimensions)	-	25000	-
4, table 3(General requirements)	-	25000	-
4, table 3(Thread)	-	25000	-
4, table 3(Mechanical properties)	-	25000	-
4, table 3(Tolerances)	-	25000	-
4, table 3(Finish-coating)	-	25000	-
4, table 3(Surface integrity)	-	25000	-
4, table 3(Acceptability)	-	25000	-
5(Designation)	-	25000	-
3(Dimensions)	-	25000	-
4, table 3(General requirements)	-	25000	-
4, table 3(Thread)	-	25000	-
4, table 3(Mechanical properties)	-	25000	-
4, table 3(Tolerances)	-	25000	-
4, table 3(Finish-coating)	-	25000	-
4, table 3(Surface integrity)	-	25000	-
4, table 3(Acceptability)	-	25000	-
5(Designation)	-	25000	-

31 Dec, 2026

-
Included w.e.f. 03.10.2024

7007

Atmy Analytical Labs Pvt. Ltd., Faridabad

8167506

IS 1470 (2013)

Silicomanganese - Specification (Fourth Revision)

14500 View breakup
-

Clause No.	Exclusion	Remark
Clause-4(Grades)	-	-
Clause-6(Supply of Materials)	-	-
Clause-7.1(Constitution of Consignment)	-	-
Clause-7.2.1(Mn, Max)	-	-
Clause-7.2.1(Si, Max)	-	-
Clause-7.2.1(Phosphorus)	-	-
Clause-7.2.1(Sulphur)	-	-
Clause-7.2.4(Established instrumental/chemical method)	-	-
Clause-8(Size Designation)	-	-
Clause-10(Sampling)	-	-
Clause-12(Marking)	-	-

25 Feb, 2027

-
Included w.e.f 04.12.2024

7008

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 1367 : Part 13 (2020)

Technical Supply Conditions for Threaded Steel Fasteners Part 13 Hot Dip Galvanized Coatings on Threaded Fasteners ( Third Revision )

Hot Dip Galvanized Coatings on Threaded Fasteners

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1(Chemical Composition)	-	9000	-
7.0(Mechanical Propoerties ( Proof load & Tesnsile Strength))	-	9000	-
8.1(Appearance of zinc coating)	-	9000	-
8.3(Zinc coating thickness)	-	9000	-
8.4(Adhesion of Zinc Coating)	-	9000	-

31 Dec, 2026

-
including w.e.f.09.10.2024

7009

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 1364 : Part 2 (2023)

Hexagon head bolts screws and nuts of product grades A and B Part 2 Hexagon head screws (Size range M1.6 to M64 ) (Sixth revision of IS 1364 (Part 2))

19800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(Dimensions)	-	6500	For complete dimension and qualitative tests
Cl-5, Table-5(General requirements)	-	6500	For complete dimension and qualitative tests
Cl-5, Table-5(Thread-Tolerance class)	-	6500	For complete dimension and qualitative tests
Cl-5, Table-5(Mechanical properties-Steel)	-	10800	For complete mechanical test
Cl-5, Table-5(Mechanical properties-Stainless steel)	-	10800	For complete mechanical test
Cl-5, Table-5(Tolerances- Product grade)	-	6500	For complete dimension and qualitative tests
Cl-5, Table-5(Surface condition -Electroplated coatings)	-	2500	-
Cl-5, Table-5(Surface condition- Non-electrolytically applied zinc flake)	-	2500	-
Cl-5, Table-5(Surface condition - Hot dip galvanized coatings)	-	2500	-
Cl-5, Table-5("Surface integrity -Limits for surface discontinuities")	-	2500	-
Cl-6(Marking)	-	6500	For complete dimension and qualitative tests

04 Dec, 2028

-
Included w.e.f. 18.09.2024

7010

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 1367 : Part 6 (2018)

Technical supply conditions for threaded steel fasteners: Part 6 mechanical properties of fasteners made of carbon steel and alloy steel - Nuts with specified property classes - Coarse thread and fine pitch thread (Fourth Revision)

Thin nuts Regular nuts and high nuts

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Material Testing)	-	9000	-
9.1(Proof Load)	-	9000	-
9.2(Hardness Test)	-	9000	-
9.3(Surface Integrity)	-	9000	-
Cl-4.3(Ranges of nominal diameters in relation to nut style and property class)	-	9000	-

31 Dec, 2026

-
-

7011

Delta Testing and Research Laboratories Private Limited (C5)

9179506

IS 13488 (2008)

Irrigation equipment - Emitting pipe systems - Specification (First Revision)

All Grade / Type / Size / Designation

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Materials - shall be resistant to fertilizers and chemicals commonly employed in irrigation, and shall be suitable for use with water at temperatures up to 60°C and at pressures designed for the emitting pipe)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1.2 (Ref. Cl 4.1.a of IS 12786 : 1989)(Potyethylene - higher olefins constituent )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1.2 (Ref. Cl 4.1.b of IS 12786 : 1989)(Potyethylene - anti-oxidant)	-	2000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1.2 (Ref. Cl 4.1.c.i of IS 12786 : 1989)(Density)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1.2 (Ref. Cl 4.1.c.ii of IS 12786 : 1989)(Toluene extract - Annex A of IS 12786:1989)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1.2 (Ref. Cl 4.1.c.iii of IS 12786 : 1989)(Volatile matter - Annex B of IS 12786:1989)	-	2000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1.2 (Ref. Cl 4.1.c & 4.2.a of IS 12786 : 1989)(Carbon Black content - IS 2530 : 1963)	-	2000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1.2 (Ref. Cl 4.2.b of IS 12786 : 1989)(The dispersion of Carbon Black content shall be satisfactory - IS 2530 : 1963)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1.2 (Ref. Cl 4.3 of IS 12786 : 1989)(Addition of not more than 10 percent of the manufactures own rework material produced during the manufacture and works testing of pipe complying with this standard is permitted. No other rework material shall be used)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2.2(Fittings)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.3(General)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.3(General)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.1.2(Uniformity of Emission Rate for Unregulated Emitting Pipes)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.1.3(Uniformity of Emission Rate for Regulated Emitting Pipes)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.2(Emission Rate of Emitting Unit as a Function of Inlet Pressure)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.2.1(Unregu/Qt~d Emining Pipe)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.2.2(Regulated Emitting Pipes)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.3.1(Wall Thickness ofEmitting Pipe)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.3.2(Inside Diameter ofEmitting Pipe)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.3.3(Flow Paths in Emitting Unit)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.3.4(Spacing ofEmitter Units)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.4.1(Resistance to Hydrostatic Pressure at Ambient Temperature)	-	2000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.4.2(Resistance to Hydrostatic Pressure at Elevated Temperature)	-	2000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.5(Resistance to Tension at Elevated Temperature)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.5(Resistance to Tension at Elevated Temperature)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.5(Resistance to Tension at Elevated Temperature)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.6(Resistance to Pull Out of Joints Between Fitting and Emitting IS 13479)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.7.1(Resistance of PE Emitting Pipe to Environmental Stress Cracking -Acceptance Test Annex D of IS 12786)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.7.2(Resistance of PE Emitting Pipe to Environmental Stress Cracking - Type Test Annex D of IS 12786)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.8(Determination of Emitting Unit Exponent)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1(DESIGNATION - Non regulated Emitting Pipe)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.2(DESIGNATION - Regulated Emitting Pipe)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1 a(Identification)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1 a(Identification)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1 c(Volatile matter Extract)	-	2000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1 d(Density)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1 d(MFI @ 1900C/2.16 Kg)	-	2000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.2(Carbon black content)	-	2000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.2(Carbon black dispersion)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1(Materials)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1.1, Table 1,(i)(Nominal Diameter)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1.1, Table 1,(ii)(Inside Diameter)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1.1, Table 1,(iii)(Tolerance on I.D)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1.1, Table 1,(iv)(Wall Thickness)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2(Fittings)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.3(General)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1(Test Specimens)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2(Order of Tests)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.3(Testing Conditions)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.4(Accuracy of Measuring Devices)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.1(Uniformity of Emission Rate)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.1.2(Unregulated Emitting Pipes)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.1.3(Regulated Emitting Pipes)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.2(Emission Rate of Emitting Unit as a Function of Inlet Pressure)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.2.1(Unregulated Emitting Pipes)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.2.2(Regulated Emitting Pipes)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.3.1(Wall Thickness ofEmitting Pipe)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.3.2(Inside Diameter ofEmitting Pipe)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.3.3(Flow Paths in Emitting Unit)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.3.4(Spacing of Emitter Units)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.4(Resistance of Emitting Pipes to Hydrostatic Pressure)	-	2000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.5(Resistance to Tension at Elevated Temperature)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.6(Resistance to Pull Out ofJoints Between Fitting and Emitting)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.7.1(Acceptance Test)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.7.2(Type Test)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.8(Determination of Emitting Unit Exponen)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1(Non-regulated Emitting Pipe)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.2(Regulated Emitting Pipe)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10.1(Marking)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

21 Aug, 2027

-
Included w.e.f. 09.09.2024

7012

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 1367 : Part 3 (2017)

Technical supply conditions for threaded steel fasteners: Part 3 mechanical properties of fasteners made of carbon steel and bolts, screws and studs (Fifth Revision)

Property class: 4.6 4.8 5.6 5.8 6.8 8.8 9.8 10.9 12.9

22000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Material Testing)	-	22000	-
7.0(Mechanical testing (Ys, TS, %EL, RA))	-	22000	-
9.6(Proof Load test for finished bolts scrwes, and studs)	-	22000	-
9.8(Head soundness test)	-	22000	-
9.9(Hardness Test)	-	22000	-
9.10(Decarburization test)	-	22000	-
9.11(Carburization test)	-	22000	-
9.12(Reducing of hardnes after retempering , Hv)	-	22000	-
9.13(Torsional Test)	-	22000	-
9.14(Impact Test)	-	22000	-
9.15(Surface discounity)	-	22000	-
6.0(Material Testing)	-	22000	-
7.0(Mechanical testing (Ys, TS, %EL, RA))	-	22000	-
9.6(Proof Load test for finished bolts scrwes, and studs)	-	22000	-
9.8(Head soundness test)	-	22000	-
9.9(Hardness Test)	-	22000	-
9.10(Decarburization test)	-	22000	-
9.11(Carburization test)	-	22000	-
9.12(Reducing of hardnes after retempering , Hv)	-	22000	-
9.13(Torsional Test)	-	22000	-
9.14(Impact Test)	-	22000	-
9.15(Surface discounity)	-	22000	-
6.0(Material Testing)	-	22000	-
7.0(Mechanical testing (Ys, TS, %EL, RA))	-	22000	-
9.6(Proof Load test for finished bolts scrwes, and studs)	-	22000	-
9.8(Head soundness test)	-	22000	-
9.9(Hardness Test)	-	22000	-
9.10(Decarburization test)	-	22000	-
9.11(Carburization test)	-	22000	-
9.12(Reducing of hardnes after retempering , Hv)	-	22000	-
9.13(Torsional Test)	-	22000	-
9.14(Impact Test)	-	22000	-
9.15(Surface discounity)	-	22000	-

31 Dec, 2026

-
including w.e.f.09.10.2024

7013

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 4990 (2024)

PLYWOOD FOR CONCRETE SHUTTERING WORKS SPECIFICATION (Fourth Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Timber)	-	15000	For Complete Testing
Cl-5.2(Adhesives for Bonding of Veneers)	-	15000	For Complete Testing
Cl-6.1(Manufacture)	-	15000	For Complete Testing
Cl-6.2(Manufacture ( Thickness of veneers))	-	15000	For Complete Testing
Cl-6.3(Manufacture ( Physical and mechanical properties of veneers))	-	15000	For Complete Testing
Cl-6.4, 6.7(Manufacture (Plywood for concrete shuttering))	-	15000	For Complete Testing
Cl-6.5(Manufacture (Scarf joints))	-	15000	For Complete Testing
Cl-6.6(Manufacture ( Preservative treatment))	-	15000	For Complete Testing
Cl-7.1(Dimensions -length)	-	15000	For Complete Testing
Cl-7.2(Thickness)	-	15000	For Complete Testing
Cl-7.3(Squareness)	-	15000	For Complete Testing
Cl-8.1, 8.2(Workmanship and finish)	-	15000	For Complete Testing
Cl-10.3(Moisture Content)	-	15000	For Complete Testing
Cl-10.4.1(Glue Adhesion in Dry State - Glue Shear Strength)	-	15000	For Complete Testing
Cl-10.4.2(Glue Adhesion in Dry State - Adhesion of Plies)	-	15000	For Complete Testing
Cl-10.5, 10.5.1(Resistance to Water Test)	-	15000	For Complete Testing
Cl-10.5.1.1(Water Resistance Test-Glue shear strength)	-	15000	For Complete Testing
Cl-10.5.1.2(Water Resistance Test-Adhesion of plies)	-	15000	For Complete Testing
Cl-10.5.2(Water Resistance Test (Alternate method))	-	15000	For Complete Testing
Cl-10.6(Water resistance test (Concrete shuttering Plywood))	-	15000	For Complete Testing
Cl-10.7.1, Table-2(Mycological Test- Glue shear strengt)	-	15000	For Complete Testing
Cl-10.7.2(Mycological Test- Adhesion of plies)	-	15000	For Complete Testing
Cl-10.8(Tensile Strength)	-	15000	For Complete Testing
Cl-10.9, Table-3 (i)(Along (parallel to the grain direction of the face veneer))	-	15000	For Complete Testing
Cl-10.9, Table-3 (ii)(Across (perpendicular to the grain direction of the face veneer))	-	15000	For Complete Testing
Cl-10.10, Table-4 (i) a(Wet Bending Strength -Modulus of Elasticity (MOE),- Average)	-	15000	For Complete Testing
Cl-10.10, Table-4 (i) b(Wet Bending Strength - Modulus of Elasticity (MOE),- Minimum individual)	-	15000	For Complete Testing
Cl-10.11(Retention of Preservative)	-	15000	For Complete Testing
Cl-10.12(Formaldehyde Content Test)	-	15000	For Complete Testing
Cl-10.13(Steady-State Formaldehyde Emission Test)	-	15000	For Complete Testing
Cl-5.1(Timber)	-	0	-
Cl-5.2(Adhesives for Bonding of Veneers)	-	0	-
Cl-6.1(Manufacture)	-	0	-
Cl-6.2(Manufacture ( Thickness of veneers))	-	0	-
Cl-6.3(Manufacture ( Physical and mechanical properties of veneers))	-	0	-
Cl-6.4, 6.7(Manufacture (Plywood for concrete shuttering))	-	0	-
Cl-6.5(Manufacture (Scarf joints))	-	0	-
Cl-6.6(Manufacture ( Preservative treatment))	-	0	-
Cl-7.1(Dimensions -length)	-	0	-
Cl-7.2(Thickness)	-	0	-
Cl-7.3(Squareness)	-	0	-
Cl-8.1, 8.2(Workmanship and finish)	-	0	-
Cl-10.3(Moisture Content)	-	0	-
Cl-10.4.1(Glue Adhesion in Dry State - Glue Shear Strength)	-	0	-
Cl-10.4.2(Glue Adhesion in Dry State - Adhesion of Plies)	-	0	-
Cl-10.5, 10.5.1(Resistance to Water Test)	-	0	-
Cl-10.5.1.1(Water Resistance Test-Glue shear strength)	-	0	-
Cl-10.5.1.2(Water Resistance Test-Adhesion of plies)	-	0	-
Cl-10.5.2(Water Resistance Test (Alternate method))	-	0	-
Cl-10.6(Water resistance test (Concrete shuttering Plywood))	-	0	-
Cl-10.7.1, Table-2(Mycological Test- Glue shear strengt)	-	0	-
Cl-10.7.2(Mycological Test- Adhesion of plies)	-	0	-
Cl-10.8(Tensile Strength)	-	0	-
Cl-10.9, Table-3 (i)(Along (parallel to the grain direction of the face veneer))	-	0	-
Cl-10.9, Table-3 (ii)(Across (perpendicular to the grain direction of the face veneer))	-	0	-
Cl-10.10, Table-4 (i) a(Wet Bending Strength -Modulus of Elasticity (MOE),- Average)	-	0	-
Cl-10.10, Table-4 (i) b(Wet Bending Strength - Modulus of Elasticity (MOE),- Minimum individual)	-	0	-
Cl-10.11(Retention of Preservative)	-	0	-
Cl-10.12(Formaldehyde Content Test)	-	0	-
Cl-10.13(Steady-State Formaldehyde Emission Test)	-	0	-

04 Dec, 2028

-
Included w.e.f 08.10.2024 Exclusion: Cl.10.13 (Steady-State Formaldehyde Emission Test)

7014

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 710 (2024)

MARINE PLYWOOD - SPECIFICATION (Third Revision)

14000 View breakup
-

Clause No.	Exclusion	Remark
Cl-4.1(Timber)	-	Rs. 14,000 for complete testing
Cl-4.2(Adhesive)	-	Rs. 14,000 for complete testing
Cl-5.1(Veneers)	-	Rs. 14,000 for complete testing
Cl-5.2.1(Glueing)	-	Rs. 14,000 for complete testing
Cl -5.2.2(Thickness of Veneers)	-	Rs. 14,000 for complete testing
Cl - 5.2.3.1(Joint in Veneers)	-	Rs. 14,000 for complete testing
Cl - 5.2.3.2(Edge joints)	-	Rs. 14,000 for complete testing
Cl - 5.2.3.3(End joints)	-	Rs. 14,000 for complete testing
Cl - 5.2.3.4(Scarf joints)	-	Rs. 14,000 for complete testing
Cl - 5.2.4(Grain Direction)	-	Rs. 14,000 for complete testing
Cl-5.3(Treatment)	-	Rs. 14,000 for complete testing
Cl-5.4(Moisture Content)	-	Rs. 14,000 for complete testing
Cl-6.1(Dimensions (length))	-	Rs. 14,000 for complete testing
Cl-6.2(Thickness)	-	Rs. 14,000 for complete testing
Cl-6.3(Squareness)	-	Rs. 14,000 for complete testing
Cl-7.1, 7.2, 7.3, 7.4, 7.5 & 7.6(Workmanship and finish)	-	Rs. 14,000 for complete testing
Cl-9.3(Moisture Content)	-	Rs. 14,000 for complete testing
Cl-9.4.2(Glue Adhesion in Dry State- Adhesion of Plies)	-	Rs. 14,000 for complete testing
Cl-9.4.1(Glue Adhesion in Dry State- Glue Shear Strength -Average)	-	Rs. 14,000 for complete testing
Cl-9.5.1.1(Glue Adhesion in Water Resistance - Glue Shear Strength -Average)	-	Rs. 14,000 for complete testing
Cl-9.5.1.2(Water Resistance Test-Adhesion of plies)	-	Rs. 14,000 for complete testing
Cl-9.5.2(Water Resistance Test)	-	Rs. 14,000 for complete testing
Cl-9.6(Tensile Strength-Along the grain)	-	Rs. 14,000 for complete testing
Cl-9.7(Mycological Test -Adhesion)	-	Rs. 14,000 for complete testing
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	Rs. 14,000 for complete testing
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	Rs. 14,000 for complete testing
Cl-9.9, Table-3 (i) a(Wet Bending Strength- Modulus of Elasticity (MOE)- Average)	-	Rs. 14,000 for complete testing
Cl-9.9, Table-3 (i) b(Wet Bending Strength- Modulus of Elasticity (MOE),-Minimum individual)	-	Rs. 14,000 for complete testing
Cl-9.10(Retention of Preservative)	-	Rs. 14,000 for complete testing
Cl-9.11(Formaldehyde Content Test)	-	Rs. 14,000 for complete testing
Cl-9.12(Steady-State Formaldehyde Emission Test)	-	Rs. 14,000 for complete testing
Cl-9.4.2(Adhesion of Plies)	-	Rs. 14,000 for complete testing
Cl-4.1(Timber)	-	-
Cl-4.2(Adhesive)	-	-
Cl-5.1(Veneers)	-	-
Cl-5.2.1(Glueing)	-	-
Cl -5.2.2(Thickness of Veneers)	-	-
Cl - 5.2.3.1(Joint in Veneers)	-	-
Cl - 5.2.3.2(Edge joints)	-	-
Cl - 5.2.3.3(End joints)	-	-
Cl - 5.2.3.4(Scarf joints)	-	-
Cl - 5.2.4(Grain Direction)	-	-
Cl-5.3(Treatment)	-	-
Cl-5.4(Moisture Content)	-	-
Cl-6.1(Dimensions (length))	-	-
Cl-6.2(Thickness)	-	-
Cl-6.3(Squareness)	-	-
Cl-7.1, 7.2, 7.3, 7.4, 7.5 & 7.6(Workmanship and finish)	-	-
Cl-9.3(Moisture Content)	-	-
Cl-9.4.2(Glue Adhesion in Dry State- Adhesion of Plies)	-	-
Cl-9.4.1(Glue Adhesion in Dry State- Glue Shear Strength -Average)	-	-
Cl-9.5.1.1(Glue Adhesion in Water Resistance - Glue Shear Strength -Average)	-	-
Cl-9.5.1.2(Water Resistance Test-Adhesion of plies)	-	-
Cl-9.5.2(Water Resistance Test)	-	-
Cl-9.6(Tensile Strength-Along the grain)	-	-
Cl-9.7(Mycological Test -Adhesion)	-	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	-
Cl-9.9, Table-3 (i) a(Wet Bending Strength- Modulus of Elasticity (MOE)- Average)	-	-
Cl-9.9, Table-3 (i) b(Wet Bending Strength- Modulus of Elasticity (MOE),-Minimum individual)	-	-
Cl-9.10(Retention of Preservative)	-	-
Cl-9.11(Formaldehyde Content Test)	-	-
Cl-9.12(Steady-State Formaldehyde Emission Test)	-	-
Cl-9.4.2(Adhesion of Plies)	-	-
5.1.1(Defects in veneers)	-	-

04 Dec, 2028

-
Included w.e.f 08.10.2024 Exclusion: Cl.9.12 (Steady-State Formaldehyde Emission Test)

7015

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 303 (2024)

Plywood for General Purposes â Specification (Fourth Revision)

8000 View breakup
-

Clause No.	Exclusion	Remark
Cl-5.1(Classification by appearance)	-	For BWR Grade - Rs. 8,000/- BWP Grade – Rs. 7000/- MR Grade – Rs. 6,500/-
Cl-5.2, Table- 1 (i)(Blister)	-	For BWR Grade - Rs. 8,000/- BWP Grade – Rs. 7000/- MR Grade – Rs. 6,500/-
Cl-5.2, Table- 1 (ii)(Checks)	-	For BWR Grade - Rs. 8,000/- BWP Grade – Rs. 7000/- MR Grade – Rs. 6,500/-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	For BWR Grade - Rs. 8,000/- BWP Grade – Rs. 7000/- MR Grade – Rs. 6,500/-
Cl-5.2, Table- 1 (iv)(Dote)	-	For BWR Grade - Rs. 8,000/- BWP Grade – Rs. 7000/- MR Grade – Rs. 6,500/-
Cl-5.2, Table- 1 (v)(Insect hole)	-	For BWR Grade - Rs. 8,000/- BWP Grade – Rs. 7000/- MR Grade – Rs. 6,500/-
Cl-5.2, Table- 1 (vi)(Joints)	-	For BWR Grade - Rs. 8,000/- BWP Grade – Rs. 7000/- MR Grade – Rs. 6,500/-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	For BWR Grade - Rs. 8,000/- BWP Grade – Rs. 7000/- MR Grade – Rs. 6,500/-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	For BWR Grade - Rs. 8,000/- BWP Grade – Rs. 7000/- MR Grade – Rs. 6,500/-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	For BWR Grade - Rs. 8,000/- BWP Grade – Rs. 7000/- MR Grade – Rs. 6,500/-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	For BWR Grade - Rs. 8,000/- BWP Grade – Rs. 7000/- MR Grade – Rs. 6,500/-
Cl-5.2, Table- 1 (xi)(Patches)	-	For BWR Grade - Rs. 8,000/- BWP Grade – Rs. 7000/- MR Grade – Rs. 6,500/-
Cl-5.2, Table- 1 (xii)(Splits)	-	For BWR Grade - Rs. 8,000/- BWP Grade – Rs. 7000/- MR Grade – Rs. 6,500/-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	For BWR Grade - Rs. 8,000/- BWP Grade – Rs. 7000/- MR Grade – Rs. 6,500/-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	For BWR Grade - Rs. 8,000/- BWP Grade – Rs. 7000/- MR Grade – Rs. 6,500/-
Cl-6.1(Timber)	-	For BWR Grade - Rs. 8,000/- BWP Grade – Rs. 7000/- MR Grade – Rs. 6,500/-
Cl-6.2(Adhesive)	-	For BWR Grade - Rs. 8,000/- BWP Grade – Rs. 7000/- MR Grade – Rs. 6,500/-
Cl-7.2.1(Thickness of veneers)	-	For BWR Grade - Rs. 8,000/- BWP Grade – Rs. 7000/- MR Grade – Rs. 6,500/-
Cl-7.2.3(Grain Direction)	-	For BWR Grade - Rs. 8,000/- BWP Grade – Rs. 7000/- MR Grade – Rs. 6,500/-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	For BWR Grade - Rs. 8,000/- BWP Grade – Rs. 7000/- MR Grade – Rs. 6,500/-
Cl-7.2.5.2(Splits)	-	For BWR Grade - Rs. 8,000/- BWP Grade – Rs. 7000/- MR Grade – Rs. 6,500/-
Cl-7.2.5.3(Overlap)	-	For BWR Grade - Rs. 8,000/- BWP Grade – Rs. 7000/- MR Grade – Rs. 6,500/-
Cl-8.1(Dimensions -length)	-	For BWR Grade - Rs. 8,000/- BWP Grade – Rs. 7000/- MR Grade – Rs. 6,500/-
Cl-8.2(Thickness of the plywood boards)	-	For BWR Grade - Rs. 8,000/- BWP Grade – Rs. 7000/- MR Grade – Rs. 6,500/-
Cl-8.3(Squareness)	-	For BWR Grade - Rs. 8,000/- BWP Grade – Rs. 7000/- MR Grade – Rs. 6,500/-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	For BWR Grade - Rs. 8,000/- BWP Grade – Rs. 7000/- MR Grade – Rs. 6,500/-
Cl-11.3.2(Mycological Test)	-	For BWR Grade - Rs. 8,000/- BWP Grade – Rs. 7000/- MR Grade – Rs. 6,500/-
Cl-11.4(Moisture Content)	-	For BWR Grade - Rs. 8,000/- BWP Grade – Rs. 7000/- MR Grade – Rs. 6,500/-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	For BWR Grade - Rs. 8,000/- BWP Grade – Rs. 7000/- MR Grade – Rs. 6,500/-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	For BWR Grade - Rs. 8,000/- BWP Grade – Rs. 7000/- MR Grade – Rs. 6,500/-
Cl-11.6(Formaldehyde Content Test)	-	For BWR Grade - Rs. 8,000/- BWP Grade – Rs. 7000/- MR Grade – Rs. 6,500/-
Cl-11.7(Steady-State Formaldehyde Emission Test)	-	For BWR Grade - Rs. 8,000/- BWP Grade – Rs. 7000/- MR Grade – Rs. 6,500/-
Cl-5.1(Classification by appearance)	-	-
Cl-5.2, Table- 1 (i)(Blister)	-	-
Cl-5.2, Table- 1 (ii)(Checks)	-	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	-
Cl-5.2, Table- 1 (iv)(Dote)	-	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	-
Cl-5.2, Table- 1 (vi)(Joints)	-	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	-
Cl-5.2, Table- 1 (xi)(Patches)	-	-
Cl-5.2, Table- 1 (xii)(Splits)	-	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	-
Cl-6.1(Timber)	-	-
Cl-6.2(Adhesive)	-	-
Cl-7.2.1(Thickness of veneers)	-	-
Cl-7.2.3(Grain Direction)	-	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	-
Cl-7.2.5.2(Splits)	-	-
Cl-7.2.5.3(Overlap)	-	-
Cl-8.1(Dimensions -length)	-	-
Cl-8.2(Thickness of the plywood boards)	-	-
Cl-8.3(Squareness)	-	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	-
Cl-11.3.2(Mycological Test)	-	-
Cl-11.4(Moisture Content)	-	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	-
Cl-11.6(Formaldehyde Content Test)	-	-
Cl-11.7(Steady-State Formaldehyde Emission Test)	-	-

04 Dec, 2028

-
Included w.e.f 08.10.2024 Exclusion: Cl.11.7 (Steady-State Formaldehyde Emission Test)

7016

EKO PRO ENGINEERS PRIVATE LIMITED (32/41), GHAZIABAD

9179706

IS 9873 : Part 2 (2017)

Safety of toys: Part 2 flammability (Third Revision)

1500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.2-5.2(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy-Duration of the flame after the removal of the test flame)	-	100	-
4.2.2(a)-5.2(Toys to be worn on the head-Test relating to Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy- if ignition occurs, the maximum burnt length of hair, pile, or material that behaves in a similar manner when the initial length was 150 mm or more)	-	75	-
4.2.2(b)-5.2(Toys to be worn on the head-Test relating to Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy- if ignition occurs, the maximum burnt length of hair, pile, or material that behaves in a similar manner when the initial length was less than 150 mm)	-	75	-
4.2.3-5.3(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude less than 50 mm and more than 5 mm from the surface of the toy-Duration of the flame after the removal of the test flame)	-	75	-
4.2.3-5.3(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude less than 50 mm and more than 5 mm from the surface of the toy- maximum distance between the upper edge of the burnt area and the point of application of the test flame)	-	75	-
4.2.4-5.3(Toys to be worn on the head-Full or partial moulded head masks-Duration of the flame after the removal of the test flame)	-	75	-
4.2.4-5.3(Toys to be worn on the head-Full or partial moulded head masks-maximum distance between the upper edge of the burnt area and the point of application of the test flame)	-	75	-
4.2.5-5.4(Toys to be worn on the head-Flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks)-rate of spread of flame)	-	75	-
4.2.5-5.4(Toys to be worn on the head-Flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks)-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	75	-
4.3-5.4(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play-rate of spread of flame)	-	75	-
4.3-5.4(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child)	-	75	-
4.3(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play)	-	75	-
4.4-5.4(Toys intended to be entered by a child-rate of spread of flame)	-	75	-
4.4-5.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child)	-	75	-
4.4-5.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	75	-
4.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	75	-
4.5-5.5(Soft-filled toys-rate of spread of flame )	-	75	-
4.5-5.5(Soft-filled toys-Test for soft-filled toys )	-	75	-
4.1(General)	-	50	-
4.2.2-5.2(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy-Duration of the flame after the removal of the test flame)	-	0	-
4.2.2(a)-5.2(Toys to be worn on the head-Test relating to Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy- if ignition occurs, the maximum burnt length of hair, pile, or material that behaves in a similar manner when the initial length was 150 mm or more)	-	0	-
4.2.2(b)-5.2(Toys to be worn on the head-Test relating to Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy- if ignition occurs, the maximum burnt length of hair, pile, or material that behaves in a similar manner when the initial length was less than 150 mm)	-	0	-
4.2.3-5.3(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude less than 50 mm and more than 5 mm from the surface of the toy-Duration of the flame after the removal of the test flame)	-	0	-
4.2.3-5.3(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude less than 50 mm and more than 5 mm from the surface of the toy- maximum distance between the upper edge of the burnt area and the point of application of the test flame)	-	0	-
4.2.4-5.3(Toys to be worn on the head-Full or partial moulded head masks-Duration of the flame after the removal of the test flame)	-	0	-
4.2.4-5.3(Toys to be worn on the head-Full or partial moulded head masks-maximum distance between the upper edge of the burnt area and the point of application of the test flame)	-	0	-
4.2.5-5.4(Toys to be worn on the head-Flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks)-rate of spread of flame)	-	0	-
4.2.5-5.4(Toys to be worn on the head-Flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks)-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	0	-
4.3-5.4(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play-rate of spread of flame)	-	0	-
4.3-5.4(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child)	-	0	-
4.3(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play)	-	0	-
4.4-5.4(Toys intended to be entered by a child-rate of spread of flame)	-	0	-
4.4-5.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child)	-	0	-
4.4-5.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	0	-
4.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	0	-
4.5-5.5(Soft-filled toys-rate of spread of flame )	-	0	-
4.5-5.5(Soft-filled toys-Test for soft-filled toys )	-	0	-
4.1(General)	-	0	-

26 Aug, 2027

-
Included w.e.f. 09.09.2024

7017

Elutech Laboratory and Calibration Services, Jaipur

9179806

IS 710 (2010)

Marine plywood - Specification (Second Revision)

12500 View breakup
Rs. 12500/- for complete testing excluding raw material testing.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11.1(MARKING)	-	12500	Rs 12500 for complete testing excluding raw material testing.
11.2(MARKING)	-	12500	-
7.1(WORKMANSHIP AND FINISH )	-	12500	-
7.2(WORKMANSHIP AND FINISH )	-	12500	-
7.3(WORKMANSHIP AND FINISH )	-	12500	-
7.5(WORKMANSHIP AND FINISH )	-	12500	-
6.1(DIMENSIONS)	-	12500	-
6.2(DIMENSIONS)	-	12500	-
6.3(DIMENSIONS)	-	12500	-
6.3(DIMENSIONS)	-	12500	-
9.1.1(MOISTURE CONTENT)	-	12500	-
9.1.2 , 9.1.2.1(Glue Adhesion in Dry State)	-	12500	-
9.1.2 , 9.1.2.2(Glue Adhesion in Dry State)	-	12500	-
9.1.3 , 9.1.3.1.1(Water resistance test)	-	12500	-
9.1.3 , 9.1.3.1.2(Water resistance test)	-	12500	-
9.1.5(Mycological test)	-	12500	-
9.1.5 , 9.1.3.1.1(Mycological test)	-	12500	-
9.1.5 , 9.1.3.1.2(Mycological test)	-	12500	-
9.1.4(Tensile strength)	-	12500	-
9.1.6 (Table 3)(Static bending strength)	-	12500	-
9.1.6 (Table 3)(Static bending strength)	-	12500	-
9.1.7 (Table 4)(Wet bending strength)	-	12500	-
9.1.7 (Table 4)(Wet bending strength)	-	12500	-
9.1.8(Retention of preservative)	-	12500	-
Cl. 9.1.7 (Table 4) (Cl. 9.1.7 (Table 4) (Modulus of Rupture: Across the Face Grain: Minimum Individual))	-	12500	-
Cl. 9.1.7 (Table 4) (Cl. 9.1.7 (Table 4) (Modulus of Rupture: Across the Face Grain: Average))	-	12500	-
Cl. 9.1.7 (Table 4) (Cl. 9.1.7 (Table 4) (Modulus of Rupture: Along the Face Grain: Minimum Individual))	-	12500	-
Cl. 9.1.7 (Table 4) (Cl. 9.1.7 (Table 4) (Modulus of Rupture: Along the Face Grain: Average))	-	12500	-
Cl. 9.1.7 (Table 4)(Cl. 9.1.7 (Table 4) (Modulus of Elasticity: Across the Face Grain: Minimum Individual))	-	12500	-
Cl. 9.1.7 (Table 4) (Cl. 9.1.7 (Table 4) (Modulus of Elasticity: Across the Face Grain: Average))	-	12500	-
Cl. 9.1.7 (Table 4) (Cl. 9.1.7 (Table 4) (Modulus of Elasticity: Along the Face Grain: Minimum Individual))	-	12500	-
Cl. 9.1.7 (Table 4) (Cl. 9.1.7 (Table 4) (Modulus of Elasticity: Along the Face Grain: Average))	-	12500	-
Cl. 9.1.6 (Table 3) (Cl. 9.1.6 (Table 3) (Modulus of Rupture: Across the Face Grain: Minimum Individual))	-	12500	-
Cl. 9.1.6 (Table 3) (Cl. 9.1.6 (Table 3) (Modulus of Rupture: Across the Face Grain: Average))	-	12500	-
Cl. 9.1.6 (Table 3) (Cl. 9.1.6 (Table 3) (Modulus of Rupture: Along the Face Grain: Minimum Individual))	-	12500	-
Cl. 9.1.6 (Table 3) (Cl. 9.1.6 (Table 3) (Modulus of Rupture: Along the Face Grain: Average))	-	12500	-
Cl. 9.1.6 (Table 3)(Cl. 9.1.6 (Table 3) (Modulus of Elasticity: Across the Face Grain: Minimum Individual))	-	12500	-
Cl. 9.1.6 (Table 3) (Cl. 9.1.6 (Table 3) (Modulus of Elasticity: Across the Face Grain: Average))	-	12500	-
Cl. 9.1.6 (Table 3) (Cl. 9.1.6 (Table 3) (Modulus of Elasticity: Along the Face Grain: Minimum Individual))	-	12500	-
Cl. 9.1.6 (Table 3) (Cl. 9.1.6 (Table 3) (Modulus of Elasticity: Along the Face Grain: Average))	-	12500	-
Cl. 9.1.4(Cl. 9.1.4 (Tensile Strength: Sum of the Tensile Strength in two directions))	-	12500	-
Cl. 9.1.4 (Cl. 9.1.4 (Tensile Strength: Perpendicular to grain))	-	12500	-
Cl. 9.1.4(Cl. 9.1.4 (Tensile Strength: Parallel to grain))	-	12500	-
Cl.9.1.5,9.1.3.1.1(Cl.9.1.5 (Mycological Test),9.1.3.1.1 (Glue Shear Strength: Individual))	-	12500	-
Cl.9.1.5,9.1.3.1.1(Cl.9.1.5 (Mycological Test),9.1.3.1.1 ( Glue Shear Strength: Average))	-	12500	-
Cl. 9.1.3, 9.1.3.1.1 (Cl. 9.1.3 (Water Resistance Test) , 9.1.3.1.1 (Glue Shear Strength: Individual))	-	12500	-
Cl. 9.1.3, 9.1.3.1.1 (Cl. 9.1.3 (Water Resistance Test ), 9.1.3.1.1 (Glue Shear Strength: Average))	-	12500	-
Cl. 9.1.2, 9.1.2.1 (Cl. 9.1.2 (Glue Adhesion in Dry State), 9.1.2.1 ( Glue Shear Strength: Individual))	-	12500	-
Cl. 9.1.2, 9.1.2.1 (Cl. 9.1.2 (Glue Adhesion in Dry State), 9.1.2.1 ( Glue Shear Strength: Average ))	-	12500	-
cl.5.1(manufacture - Veneers)	-	12500	-
cl.5.1(manufacture - Veneers - moisture content)	-	12500	-
cl.5.1.1(manufacture - Veneers - Defects in Veneers)	-	12500	-
cl.5.2.2(Assembly - Thickness of Veneers)	-	12500	-
6.1(DIMENSIONS)	-	12500	-
Cl-10(ADDITIONAL REQUIREMENTS FOR ECO MARK)	-	12500	-
11.1(MARKING)	-	0	-
11.2(MARKING)	-	0	-
7.1(WORKMANSHIP AND FINISH )	-	12500	-
7.2(WORKMANSHIP AND FINISH )	-	12500	-
7.3(WORKMANSHIP AND FINISH )	-	12500	-
7.5(WORKMANSHIP AND FINISH )	-	12500	-
6.1(DIMENSIONS)	-	12500	-
6.2(DIMENSIONS)	-	12500	-
6.3(DIMENSIONS)	-	12500	-
6.3(DIMENSIONS)	-	12500	-
9.1.1(MOISTURE CONTENT)	-	12500	-
9.1.2 , 9.1.2.1(Glue Adhesion in Dry State)	-	12500	-
9.1.2 , 9.1.2.2(Glue Adhesion in Dry State)	-	12500	-
9.1.3 , 9.1.3.1.1(Water resistance test)	-	12500	-
9.1.3 , 9.1.3.1.2(Water resistance test)	-	12500	-
9.1.5(Mycological test)	-	12500	-
9.1.5 , 9.1.3.1.1(Mycological test)	-	12500	-
9.1.5 , 9.1.3.1.2(Mycological test)	-	12500	-
9.1.4(Tensile strength)	-	12500	-
9.1.6 (Table 3)(Static bending strength)	-	12500	-
9.1.6 (Table 3)(Static bending strength)	-	12500	-
9.1.7 (Table 4)(Wet bending strength)	-	12500	-
9.1.7 (Table 4)(Wet bending strength)	-	12500	-
9.1.8(Retention of preservative)	-	12500	-
cl.5.1(manufacture - Veneers)	-	12500	-
cl.5.1(manufacture - Veneers - moisture content)	-	12500	-
cl.5.1.1(manufacture - Veneers - Defects in Veneers)	-	12500	-
cl.5.2.2(Assembly - Thickness of Veneers)	-	12500	-
6.1(DIMENSIONS)	-	12500	-
Cl-10(ADDITIONAL REQUIREMENTS FOR ECO MARK)	-	12500	-
11.1(MARKING)	-	12500	-
11.2(MARKING)	-	12500	-
7.1(WORKMANSHIP AND FINISH )	-	12500	-
7.2(WORKMANSHIP AND FINISH )	-	12500	-
7.3(WORKMANSHIP AND FINISH )	-	12500	-
7.5(WORKMANSHIP AND FINISH )	-	12500	-
6.1(DIMENSIONS)	-	12500	-
6.2(DIMENSIONS)	-	12500	-
6.3(DIMENSIONS)	-	12500	-
6.3(DIMENSIONS)	-	12500	-
9.1.1(MOISTURE CONTENT)	-	12500	-
9.1.2 , 9.1.2.1(Glue Adhesion in Dry State)	-	12500	-
9.1.2 , 9.1.2.2(Glue Adhesion in Dry State)	-	12500	-
9.1.3 , 9.1.3.1.1(Water resistance test)	-	12500	-
9.1.3 , 9.1.3.1.2(Water resistance test)	-	12500	-
9.1.5(Mycological test)	-	12500	-
9.1.5 , 9.1.3.1.1(Mycological test)	-	12500	-
9.1.5 , 9.1.3.1.2(Mycological test)	-	12500	-
9.1.4(Tensile strength)	-	12500	-
9.1.6 (Table 3)(Static bending strength)	-	12500	-
9.1.6 (Table 3)(Static bending strength)	-	12500	-
9.1.7 (Table 4)(Wet bending strength)	-	12500	-
9.1.7 (Table 4)(Wet bending strength)	-	12500	-
9.1.8(Retention of preservative)	-	12500	-
cl.5.1(manufacture - Veneers)	-	12500	-
cl.5.1(manufacture - Veneers - moisture content)	-	12500	-
cl.5.1.1(manufacture - Veneers - Defects in Veneers)	-	12500	-
cl.5.2.2(Assembly - Thickness of Veneers)	-	12500	-
6.1(DIMENSIONS)	-	12500	-
Cl-10(ADDITIONAL REQUIREMENTS FOR ECO MARK)	-	12500	-
11.1(MARKING)	-	12500	-
11.2(MARKING)	-	12500	-
7.1(WORKMANSHIP AND FINISH )	-	12500	-
7.2(WORKMANSHIP AND FINISH )	-	12500	-
7.3(WORKMANSHIP AND FINISH )	-	12500	-
7.5(WORKMANSHIP AND FINISH )	-	12500	-
6.1(DIMENSIONS)	-	12500	-
6.2(DIMENSIONS)	-	12500	-
6.3(DIMENSIONS)	-	12500	-
6.3(DIMENSIONS)	-	12500	-
9.1.1(MOISTURE CONTENT)	-	12500	-
9.1.2 , 9.1.2.1(Glue Adhesion in Dry State)	-	12500	-
9.1.2 , 9.1.2.2(Glue Adhesion in Dry State)	-	12500	-
9.1.3 , 9.1.3.1.1(Water resistance test)	-	12500	-
9.1.3 , 9.1.3.1.2(Water resistance test)	-	12500	-
9.1.5(Mycological test)	-	12500	-
9.1.5 , 9.1.3.1.1(Mycological test)	-	12500	-
9.1.5 , 9.1.3.1.2(Mycological test)	-	12500	-
9.1.4(Tensile strength)	-	12500	-
9.1.6 (Table 3)(Static bending strength)	-	12500	-
9.1.6 (Table 3)(Static bending strength)	-	12500	-
9.1.7 (Table 4)(Wet bending strength)	-	12500	-
9.1.7 (Table 4)(Wet bending strength)	-	12500	-
9.1.8(Retention of preservative)	-	12500	-
cl.5.1(manufacture - Veneers)	-	12500	-
cl.5.1(manufacture - Veneers - moisture content)	-	12500	-
cl.5.1.1(manufacture - Veneers - Defects in Veneers)	-	12500	-
cl.5.2.2(Assembly - Thickness of Veneers)	-	12500	-
6.1(DIMENSIONS)	-	12500	-
Cl-10(ADDITIONAL REQUIREMENTS FOR ECO MARK)	-	12500	-
CL-4.2.1(Adhesive)	-	12500	-
CL-5.2.3(Joint in Veneers)	-	12500	-
CL-5.2.4(Grain Direction)	-	12500	-
CL-5.4(Moisture Content)	-	12500	-

26 Aug, 2027

-
Included w.e.f. 19.09.2024

7018

FHHL PRIVATE LIMITED, PUNE

7124016

IS 14543 (2024)

Packaged Drinking Water Other than Packaged Natural Mineral Water Specification Third Revision

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.3(Appearance)	-	100	-
5.3/Table 1/i(Colour)	-	100	-
5.3/Table 1/ii(Odour)	-	100	-
5.3/Table 1/iii(Taste)	-	100	-
5.3/Table 1/iv(Turbidity)	-	100	-
5.3/Table 1/v(Total Dissolved Solids)	-	200	-
5.3/Table 1/vi(pH)	-	100	-
5.3/Table 2/i(Barium)	-	300	-
5.3/Table 2/ii(Copper)	-	300	-
5.3/Table 2/iii(Iron)	-	300	-
5.3/Table 2/iv(Maganese)	-	300	-
5.3/Table 2/v(Nitrate)	-	200	-
5.3/Table 2/vi(Nitrite)	-	200	-
5.3/Table 2/vii(Fluoride)	-	200	-
5.3/Table 2/viii(Zinc)	-	300	-
5.3/Table 2/ix(Silver)	-	300	-
5.3/Table 2/x(Aluminium)	-	300	-
5.3/Table 2/xi(Chloride)	-	200	-
5.3/Table 2/xii(Selenium)	-	300	-
5.3/Table 2/xiii(Suphate)	-	200	-
5.3/Table 2/xiv(Alkalinity)	-	200	-
5.3/Table 2/xv(Calcium)	-	200	-
5.3/Table 2/xvi(Magnesium)	-	200	-
5.3/Table 2/xvii(Sodium)	-	300	-
5.3/Table 2/xviii(Residual Free Chlorine)	-	200	-
5.3/Table 2/xix(Phenolic Compounds)	-	200	-
5.3/Table 2/xx(Mineral Oil)	-	300	-
5.3/Table 2/xxi(Anionic Surface- Active Agents as MBAS)	-	200	-
5.3/Table 2/xxii(Sulphide)	-	200	-
5.3/Table 2/xxiii(Antinomy)	-	200	-
5.3/Table 2/xxiv(Borates)	-	200	-
5.3/Table 2/xxxv(Bromate)	-	1500	-
5.3/Table 3/i(Mercury)	-	300	-
5.3/Table 3/ii(Cadmium)	-	300	-
5.3/Table 3/iii(Arsenic)	-	300	-
5.3/Table 3/iv(Cyanide)	-	300	-
5.3/Table 3/v(Lead)	-	300	-
5.3/Table 3/vi(Chromium)	-	300	-
5.3/Table 3/vii(Nickel)	-	300	-
5.3/Table 3/viii(Polyclorinated biphenyl (PCB))	-	300	-
5.3/Table 3/ix(Polynuclear Aromatic Hydrocarbons)	-	300	-
5.3/Table 3/x(Uranium)	-	1700	-
5.4/Annex D/i(P,P-DDT)	-	600	-
5.4/Annex D/ii(Lindane)	-	100	-
5.4/Annex D/iii(a-HCH)	-	100	-
5.4/Annex D/iii(β- HCH)	-	100	-
5.4/Annex D/iii(d-HCH)	-	100	-
5.4/Annex D/iv(Endosulfan sulfate)	-	300	-
5.4/Annex D/v(Monochrotophos)	-	100	-
5.4/Annex D/vi(Ethion)	-	100	-
5.4/Annex D/vii(Chlorpyrifos)	-	100	-
5.4/Annex D/viii(Phorate sulphoxide)	-	200	-
5.4/Annex D/ix(2,4 –D)	-	150	-
5.4/Annex D/x(Butachlor)	-	100	-
5.4/Annex D/xii(Alachlor)	-	100	-
5.4/Annex D/xiii(Atrazine)	-	100	-
5.4/Annex D/xiv(Methyl parathion)	-	200	-
5.4/Annex D/xv(Malathion)	-	100	-
5.4/Annex D/xvi(Aldrin)	-	100	-
5.4/Annex D/xvi(Dieldrin)	-	100	-
5.2.1(Escherichia Coli)	-	200	-
5.2.2(Coliform)	-	200	-
5.2.3(Faecal Streptococci & Staphylococcus aureus)	-	200	-
5.2.4(Sulphite Reducing Anaerobes)	-	200	-
5.2.5(Pseudomonas aeruginosa)	-	200	-
5.2.6(Aerobic Microbial Count @ 22 o C & 37o C)	-	400	-
5.2.7(Yeast & Mould)	-	200	-
5.2.8(Salmonella & Shigella)	-	400	-
5.2.9(Vibrio Cholera & Vibrio parahaemolyicus)	-	400	-
5.4/Annex D/i(O,P-DDD)	-	0	-
5.4/Annex D/i(O,P-DDE)	-	0	-
5.4/Annex D/i(P,P-DDE)	-	0	-
5.4/Annex D/iv(b-Endosulfan)	-	0	-
5.4/Annex D/iv(a-Endosulfan)	-	0	-
5.4/Annex D/viii(Phorate sulfone)	-	0	-
5.4/Annex D/xxvii(Methyl paraoxon)	-	0	-
5.4/Annex D/xi(Isoproturon)	-	150	-
5.4/Annex D/xxxi(Total Pesticide Residue)	-	0	-
Cl-5.1(General Requirements)	-	200	-
Cl-5.2.1(Escherichia coli or thermotolerant bacteria)	-	0	-
Cl-5.2.2(Coliform)	-	0	-
Cl-5.2.4(Sulphite Reducing Anaerobes)	-	0	-
Cl-5.2.5(Pseudomonas Aeruginosa)	-	0	-
Cl-5.2.6(Aerobic Microbial Count @ 37 deg C)	-	0	-
Cl-5.2.7(Yeast and mould)	-	0	-
Cl-5.2.8(Salmonella)	-	0	-
Cl-5.2.9(Vibrio cholera)	-	0	-
Cl-5.3, Table-1 (i)(Colour, true colour units, Max)	-	0	-
Cl-5.3, Table-1 (ii)(Odour)	-	0	-
Cl-5.3, Table-1 (iii)(Taste)	-	0	-
Cl-5.3, Table-1 (iv)(Turbidity, nephelometric turbidity unit (NTU), Max)	-	0	-
Cl-5.3, Table-1 (v)(Total dissolved solids, mg/l, Max)	-	0	-
Cl-5.3, Table-1 (vi)(pH)	-	0	-
Cl-5.3, Table-2 (i)(Barium (as Ba))	-	0	-
Cl-5.3, Table-2 (ii)(Copper (as Cu))	-	0	-
Cl-5.3, Table-2 (iii)(Iron (as Fe))	-	0	-
Cl-5.3, Table-2 (iv)(Manganese (as Mn))	-	0	-
Cl-5.3, Table-2 (v)(Nitrate (as NO3 ))	-	0	-
Cl-5.3, Table-2 (vi)(Nitrite (as NO2 ))	-	0	-
Cl-5.3, Table-2 (vii)(Fluoride (as F))	-	0	-
Cl-5.3, Table-2 (viii)(Zinc (as Zn))	-	0	-
Cl-5.3, Table-2 (ix)(Silver (as Ag))	-	0	-
Cl-5.3, Table-2 (x)(Aluminium (as A1))	-	0	-
Cl-5.3, Table-2 (xi)(Chloride (as Cl))	-	0	-
Cl-5.3, Table-2 (xii)(Selenium (as Se))	-	0	-
Cl-5.3, Table-2 (xiii)(Sulphate (as SO4 ))	-	0	-
Cl-5.3, Table-2 (xiv)(Alkalinity (as HCO3 ))	-	0	-
Cl-5.3, Table-2 (xv)(Calcium (as Ca))	-	0	-
Cl-5.3, Table-2 (xvi)(Magnesium (as Mg))	-	0	-
Cl-5.3, Table-2 (xviii)(Residual free chlorine)	-	0	-
Cl-5.3, Table-2 (xix)(Phenolic compounds (as C6H5OH))	-	0	-
Cl-5.3, Table-2 (xx)(Mineral oil)	-	0	-
Cl-5.3, Table-2 (xxi)(Anionic surface active agents)	-	0	-
Cl-5.3, Table-2 (xxiii)(Antimony (as Sb))	-	0	-
Cl-5.3, Table-2 (xxiv)(Borates (as B))	-	0	-
Cl-5.3, Table-2 (xxv)(Bromates (as BrO3 ))	-	0	-
Cl-5.3, Table-3 (i)(Mercury (as Hg))	-	0	-
Cl-5.3, Table-3 (ii)(Cadmium (as Cd))	-	0	-
Cl-5.3, Table-3 (iii)(Arsenic (as As))	-	0	-
Cl-5.3, Table-3 (iv)(Cyanide (as CN))	-	0	-
Cl-5.3, Table-3 (v)(Lead (as Pb))	-	0	-
Cl-5.3, Table-3 (vi)(Chromium (as Cr))	-	0	-
Cl-5.3, Table-3 (viii)(Polychlorinated biphenyl (PCB))	-	0	-
Cl-5.3, Table-3 (ix)(Polynuclear aromatic hydrocarbons)	-	0	-
Cl-5.3, Table-3 (x)(Uranium)	-	0	-
Cl-5.3, Table-4 (i)(Alpha emitters, Becquerel (Bq/l))	-	0	-
Cl-5.3, Table-4 (ii)(Beta emitters, Becquerel (Bq/l),)	-	0	-
Cl-5.4 (i)(Pesticide residues considered individually)	-	0	-
Cl-5.4 (ii)(Total pesticide residue)	-	0	-
Cl-5.2.3(Faecal streptococci)	-	0	-
Cl-5.2.8(shigella)	-	0	-
Cl-5.2.9(V.parahaemolyticus)	-	0	-
5.4/Annex D/i(P,P-DDD)	-	0	-
5.4/Annex D/i(O,P-DDT)	-	0	-
5.4/Annex D/viii(Phorate)	-	0	-
5.4/Annex D/xxviii(Malaoxon)	-	0	-
Cl-5.2.3(Staphylococcus aureus)	-	0	-
Cl-5.3, Table-2 (xvii)(Sodium (as Na))	-	0	-
Cl-5.3, Table-2 (xxii)(Sulphide)	-	0	-
Cl-5.3, Table-3 (vii)(Nickel (as Ni))	-	0	-
5.3(Appearance)	-	0	-
5.3/Table 1/i(Colour)	-	0	-
5.3/Table 1/ii(Odour)	-	0	-
5.3/Table 1/iii(Taste)	-	0	-
5.3/Table 1/iv(Turbidity)	-	0	-
5.3/Table 1/v(Total Dissolved Solids)	-	0	-
5.3/Table 1/vi(pH)	-	0	-
5.3/Table 2/i(Barium)	-	0	-
5.3/Table 2/ii(Copper)	-	0	-
5.3/Table 2/iii(Iron)	-	0	-
5.3/Table 2/iv(Maganese)	-	0	-
5.3/Table 2/v(Nitrate)	-	0	-
5.3/Table 2/vi(Nitrite)	-	0	-
5.3/Table 2/vii(Fluoride)	-	0	-
5.3/Table 2/viii(Zinc)	-	0	-
5.3/Table 2/ix(Silver)	-	0	-
5.3/Table 2/x(Aluminium)	-	0	-
5.3/Table 2/xi(Chloride)	-	0	-
5.3/Table 2/xii(Selenium)	-	0	-
5.3/Table 2/xiii(Suphate)	-	0	-
5.3/Table 2/xiv(Alkalinity)	-	0	-
5.3/Table 2/xv(Calcium)	-	0	-
5.3/Table 2/xvi(Magnesium)	-	0	-
5.3/Table 2/xvii(Sodium)	-	0	-
5.3/Table 2/xviii(Residual Free Chlorine)	-	0	-
5.3/Table 2/xix(Phenolic Compounds)	-	0	-
5.3/Table 2/xx(Mineral Oil)	-	0	-
5.3/Table 2/xxi(Anionic Surface- Active Agents as MBAS)	-	0	-
5.3/Table 2/xxii(Sulphide)	-	0	-
5.3/Table 2/xxiii(Antinomy)	-	0	-
5.3/Table 2/xxiv(Borates)	-	0	-
5.3/Table 2/xxxv(Bromate)	-	0	-
5.3/Table 3/i(Mercury)	-	0	-
5.3/Table 3/ii(Cadmium)	-	0	-
5.3/Table 3/iii(Arsenic)	-	0	-
5.3/Table 3/iv(Cyanide)	-	0	-
5.3/Table 3/v(Lead)	-	0	-
5.3/Table 3/vi(Chromium)	-	0	-
5.3/Table 3/vii(Nickel)	-	0	-
5.3/Table 3/viii(Polyclorinated biphenyl (PCB))	-	0	-
5.3/Table 3/ix(Polynuclear Aromatic Hydrocarbons)	-	0	-
5.3/Table 3/x(Uranium)	-	0	-
5.4/Annex D/i(P,P-DDT)	-	0	-
5.4/Annex D/ii(Lindane)	-	0	-
5.4/Annex D/iii(a-HCH)	-	0	-
5.4/Annex D/iii(β- HCH)	-	0	-
5.4/Annex D/iii(d-HCH)	-	0	-
5.4/Annex D/iv(Endosulfan sulfate)	-	0	-
5.4/Annex D/v(Monochrotophos)	-	0	-
5.4/Annex D/vi(Ethion)	-	0	-
5.4/Annex D/vii(Chlorpyrifos)	-	0	-
5.4/Annex D/viii(Phorate sulphoxide)	-	0	-
5.4/Annex D/ix(2,4 –D)	-	0	-
5.4/Annex D/x(Butachlor)	-	0	-
5.4/Annex D/xii(Alachlor)	-	0	-
5.4/Annex D/xiii(Atrazine)	-	0	-
5.4/Annex D/xiv(Methyl parathion)	-	0	-
5.4/Annex D/xv(Malathion)	-	0	-
5.4/Annex D/xvi(Aldrin)	-	0	-
5.4/Annex D/xvi(Dieldrin)	-	0	-
5.2.1(Escherichia Coli)	-	0	-
5.2.2(Coliform)	-	0	-
5.2.3(Faecal Streptococci & Staphylococcus aureus)	-	0	-
5.2.4(Sulphite Reducing Anaerobes)	-	0	-
5.2.5(Pseudomonas aeruginosa)	-	0	-
5.2.6(Aerobic Microbial Count @ 22 o C & 37o C)	-	0	-
5.2.7(Yeast & Mould)	-	0	-
5.2.8(Salmonella & Shigella)	-	0	-
5.2.9(Vibrio Cholera & Vibrio parahaemolyicus)	-	0	-
5.4/Annex D/i(O,P-DDD)	-	0	-
5.4/Annex D/i(O,P-DDE)	-	0	-
5.4/Annex D/i(P,P-DDE)	-	0	-
5.4/Annex D/iv(b-Endosulfan)	-	0	-
5.4/Annex D/iv(a-Endosulfan)	-	0	-
5.4/Annex D/viii(Phorate sulfone)	-	0	-
5.4/Annex D/xxvii(Methyl paraoxon)	-	0	-
5.4/Annex D/xi(Isoproturon)	-	150	-
5.4/Annex D/xxxi(Total Pesticide Residue)	-	0	-
Cl-5.1(General Requirements)	-	200	-
Cl-5.2.1(Escherichia coli or thermotolerant bacteria)	-	0	-
Cl-5.2.2(Coliform)	-	0	-
Cl-5.2.4(Sulphite Reducing Anaerobes)	-	0	-
Cl-5.2.5(Pseudomonas Aeruginosa)	-	0	-
Cl-5.2.6(Aerobic Microbial Count @ 37 deg C)	-	0	-
Cl-5.2.7(Yeast and mould)	-	0	-
Cl-5.2.8(Salmonella)	-	0	-
Cl-5.2.9(Vibrio cholera)	-	0	-
Cl-5.3, Table-1 (i)(Colour, true colour units, Max)	-	0	-
Cl-5.3, Table-1 (ii)(Odour)	-	0	-
Cl-5.3, Table-1 (iii)(Taste)	-	0	-
Cl-5.3, Table-1 (iv)(Turbidity, nephelometric turbidity unit (NTU), Max)	-	0	-
Cl-5.3, Table-1 (v)(Total dissolved solids, mg/l, Max)	-	0	-
Cl-5.3, Table-1 (vi)(pH)	-	0	-
Cl-5.3, Table-2 (i)(Barium (as Ba))	-	0	-
Cl-5.3, Table-2 (ii)(Copper (as Cu))	-	0	-
Cl-5.3, Table-2 (iii)(Iron (as Fe))	-	0	-
Cl-5.3, Table-2 (iv)(Manganese (as Mn))	-	0	-
Cl-5.3, Table-2 (v)(Nitrate (as NO3 ))	-	0	-
Cl-5.3, Table-2 (vi)(Nitrite (as NO2 ))	-	0	-
Cl-5.3, Table-2 (vii)(Fluoride (as F))	-	0	-
Cl-5.3, Table-2 (viii)(Zinc (as Zn))	-	0	-
Cl-5.3, Table-2 (ix)(Silver (as Ag))	-	0	-
Cl-5.3, Table-2 (x)(Aluminium (as A1))	-	0	-
Cl-5.3, Table-2 (xi)(Chloride (as Cl))	-	0	-
Cl-5.3, Table-2 (xii)(Selenium (as Se))	-	0	-
Cl-5.3, Table-2 (xiii)(Sulphate (as SO4 ))	-	0	-
Cl-5.3, Table-2 (xiv)(Alkalinity (as HCO3 ))	-	0	-
Cl-5.3, Table-2 (xv)(Calcium (as Ca))	-	0	-
Cl-5.3, Table-2 (xvi)(Magnesium (as Mg))	-	0	-
Cl-5.3, Table-2 (xviii)(Residual free chlorine)	-	0	-
Cl-5.3, Table-2 (xix)(Phenolic compounds (as C6H5OH))	-	0	-
Cl-5.3, Table-2 (xx)(Mineral oil)	-	0	-
Cl-5.3, Table-2 (xxi)(Anionic surface active agents)	-	0	-
Cl-5.3, Table-2 (xxiii)(Antimony (as Sb))	-	0	-
Cl-5.3, Table-2 (xxiv)(Borates (as B))	-	0	-
Cl-5.3, Table-2 (xxv)(Bromates (as BrO3 ))	-	0	-
Cl-5.3, Table-3 (i)(Mercury (as Hg))	-	0	-
Cl-5.3, Table-3 (ii)(Cadmium (as Cd))	-	0	-
Cl-5.3, Table-3 (iii)(Arsenic (as As))	-	0	-
Cl-5.3, Table-3 (iv)(Cyanide (as CN))	-	0	-
Cl-5.3, Table-3 (v)(Lead (as Pb))	-	0	-
Cl-5.3, Table-3 (vi)(Chromium (as Cr))	-	0	-
Cl-5.3, Table-3 (viii)(Polychlorinated biphenyl (PCB))	-	0	-
Cl-5.3, Table-3 (ix)(Polynuclear aromatic hydrocarbons)	-	0	-
Cl-5.3, Table-3 (x)(Uranium)	-	0	-
Cl-5.3, Table-4 (i)(Alpha emitters, Becquerel (Bq/l))	-	0	-
Cl-5.3, Table-4 (ii)(Beta emitters, Becquerel (Bq/l),)	-	0	-
Cl-5.4 (i)(Pesticide residues considered individually)	-	0	-
Cl-5.4 (ii)(Total pesticide residue)	-	0	-
Cl-5.2.3(Faecal streptococci)	-	0	-
Cl-5.2.8(shigella)	-	0	-
Cl-5.2.9(V.parahaemolyticus)	-	0	-
5.4/Annex D/i(P,P-DDD)	-	0	-
5.4/Annex D/i(O,P-DDT)	-	0	-
5.4/Annex D/viii(Phorate)	-	0	-
5.4/Annex D/xxviii(Malaoxon)	-	0	-
Cl-5.2.3(Staphylococcus aureus)	-	0	-
Cl-5.3, Table-2 (xvii)(Sodium (as Na))	-	0	-
Cl-5.3, Table-2 (xxii)(Sulphide)	-	0	-
Cl-5.3, Table-3 (vii)(Nickel (as Ni))	-	0	-
5.3(Appearance)	-	0	-
5.3/Table 1/i(Colour)	-	0	-
5.3/Table 1/ii(Odour)	-	0	-
5.3/Table 1/iii(Taste)	-	0	-
5.3/Table 1/iv(Turbidity)	-	0	-
5.3/Table 1/v(Total Dissolved Solids)	-	0	-
5.3/Table 1/vi(pH)	-	0	-
5.3/Table 2/i(Barium)	-	0	-
5.3/Table 2/ii(Copper)	-	0	-
5.3/Table 2/iii(Iron)	-	0	-
5.3/Table 2/iv(Maganese)	-	0	-
5.3/Table 2/v(Nitrate)	-	0	-
5.3/Table 2/vi(Nitrite)	-	0	-
5.3/Table 2/vii(Fluoride)	-	0	-
5.3/Table 2/viii(Zinc)	-	0	-
5.3/Table 2/ix(Silver)	-	0	-
5.3/Table 2/x(Aluminium)	-	0	-
5.3/Table 2/xi(Chloride)	-	0	-
5.3/Table 2/xii(Selenium)	-	0	-
5.3/Table 2/xiii(Suphate)	-	0	-
5.3/Table 2/xiv(Alkalinity)	-	0	-
5.3/Table 2/xv(Calcium)	-	0	-
5.3/Table 2/xvi(Magnesium)	-	0	-
5.3/Table 2/xvii(Sodium)	-	0	-
5.3/Table 2/xviii(Residual Free Chlorine)	-	0	-
5.3/Table 2/xix(Phenolic Compounds)	-	0	-
5.3/Table 2/xx(Mineral Oil)	-	0	-
5.3/Table 2/xxi(Anionic Surface- Active Agents as MBAS)	-	0	-
5.3/Table 2/xxii(Sulphide)	-	0	-
5.3/Table 2/xxiii(Antinomy)	-	0	-
5.3/Table 2/xxiv(Borates)	-	0	-
5.3/Table 2/xxxv(Bromate)	-	0	-
5.3/Table 3/i(Mercury)	-	0	-
5.3/Table 3/ii(Cadmium)	-	0	-
5.3/Table 3/iii(Arsenic)	-	0	-
5.3/Table 3/iv(Cyanide)	-	0	-
5.3/Table 3/v(Lead)	-	0	-
5.3/Table 3/vi(Chromium)	-	0	-
5.3/Table 3/vii(Nickel)	-	0	-
5.3/Table 3/viii(Polyclorinated biphenyl (PCB))	-	0	-
5.3/Table 3/ix(Polynuclear Aromatic Hydrocarbons)	-	0	-
5.3/Table 3/x(Uranium)	-	0	-
5.4/Annex D/i(P,P-DDT)	-	0	-
5.4/Annex D/ii(Lindane)	-	0	-
5.4/Annex D/iii(a-HCH)	-	0	-
5.4/Annex D/iii(β- HCH)	-	0	-
5.4/Annex D/iii(d-HCH)	-	0	-
5.4/Annex D/iv(Endosulfan sulfate)	-	0	-
5.4/Annex D/v(Monochrotophos)	-	0	-
5.4/Annex D/vi(Ethion)	-	0	-
5.4/Annex D/vii(Chlorpyrifos)	-	0	-
5.4/Annex D/viii(Phorate sulphoxide)	-	0	-
5.4/Annex D/ix(2,4 –D)	-	0	-
5.4/Annex D/x(Butachlor)	-	0	-
5.4/Annex D/xii(Alachlor)	-	0	-
5.4/Annex D/xiii(Atrazine)	-	0	-
5.4/Annex D/xiv(Methyl parathion)	-	0	-
5.4/Annex D/xv(Malathion)	-	0	-
5.4/Annex D/xvi(Aldrin)	-	0	-
5.4/Annex D/xvi(Dieldrin)	-	0	-
5.2.1(Escherichia Coli)	-	0	-
5.2.2(Coliform)	-	0	-
5.2.3(Faecal Streptococci & Staphylococcus aureus)	-	0	-
5.2.4(Sulphite Reducing Anaerobes)	-	0	-
5.2.5(Pseudomonas aeruginosa)	-	0	-
5.2.6(Aerobic Microbial Count @ 22 o C & 37o C)	-	0	-
5.2.7(Yeast & Mould)	-	0	-
5.2.8(Salmonella & Shigella)	-	0	-
5.2.9(Vibrio Cholera & Vibrio parahaemolyicus)	-	0	-
5.4/Annex D/i(O,P-DDD)	-	0	-
5.4/Annex D/i(O,P-DDE)	-	0	-
5.4/Annex D/i(P,P-DDE)	-	0	-
5.4/Annex D/iv(b-Endosulfan)	-	0	-
5.4/Annex D/iv(a-Endosulfan)	-	0	-
5.4/Annex D/viii(Phorate sulfone)	-	0	-
5.4/Annex D/xxvii(Methyl paraoxon)	-	0	-
5.4/Annex D/xi(Isoproturon)	-	0	-
5.4/Annex D/xxxi(Total Pesticide Residue)	-	0	-
Cl-5.1(General Requirements)	-	0	-
Cl-5.2.1(Escherichia coli or thermotolerant bacteria)	-	0	-
Cl-5.2.2(Coliform)	-	0	-
Cl-5.2.4(Sulphite Reducing Anaerobes)	-	0	-
Cl-5.2.5(Pseudomonas Aeruginosa)	-	0	-
Cl-5.2.6(Aerobic Microbial Count @ 37 deg C)	-	0	-
Cl-5.2.7(Yeast and mould)	-	0	-
Cl-5.2.8(Salmonella)	-	0	-
Cl-5.2.9(Vibrio cholera)	-	0	-
Cl-5.3, Table-1 (i)(Colour, true colour units, Max)	-	0	-
Cl-5.3, Table-1 (ii)(Odour)	-	0	-
Cl-5.3, Table-1 (iii)(Taste)	-	0	-
Cl-5.3, Table-1 (iv)(Turbidity, nephelometric turbidity unit (NTU), Max)	-	0	-
Cl-5.3, Table-1 (v)(Total dissolved solids, mg/l, Max)	-	0	-
Cl-5.3, Table-1 (vi)(pH)	-	0	-
Cl-5.3, Table-2 (i)(Barium (as Ba))	-	0	-
Cl-5.3, Table-2 (ii)(Copper (as Cu))	-	0	-
Cl-5.3, Table-2 (iii)(Iron (as Fe))	-	0	-
Cl-5.3, Table-2 (iv)(Manganese (as Mn))	-	0	-
Cl-5.3, Table-2 (v)(Nitrate (as NO3 ))	-	0	-
Cl-5.3, Table-2 (vi)(Nitrite (as NO2 ))	-	0	-
Cl-5.3, Table-2 (vii)(Fluoride (as F))	-	0	-
Cl-5.3, Table-2 (viii)(Zinc (as Zn))	-	0	-
Cl-5.3, Table-2 (ix)(Silver (as Ag))	-	0	-
Cl-5.3, Table-2 (x)(Aluminium (as A1))	-	0	-
Cl-5.3, Table-2 (xi)(Chloride (as Cl))	-	0	-
Cl-5.3, Table-2 (xii)(Selenium (as Se))	-	0	-
Cl-5.3, Table-2 (xiii)(Sulphate (as SO4 ))	-	0	-
Cl-5.3, Table-2 (xiv)(Alkalinity (as HCO3 ))	-	0	-
Cl-5.3, Table-2 (xv)(Calcium (as Ca))	-	0	-
Cl-5.3, Table-2 (xvi)(Magnesium (as Mg))	-	0	-
Cl-5.3, Table-2 (xviii)(Residual free chlorine)	-	0	-
Cl-5.3, Table-2 (xix)(Phenolic compounds (as C6H5OH))	-	0	-
Cl-5.3, Table-2 (xx)(Mineral oil)	-	0	-
Cl-5.3, Table-2 (xxi)(Anionic surface active agents)	-	0	-
Cl-5.3, Table-2 (xxiii)(Antimony (as Sb))	-	0	-
Cl-5.3, Table-2 (xxiv)(Borates (as B))	-	0	-
Cl-5.3, Table-2 (xxv)(Bromates (as BrO3 ))	-	0	-
Cl-5.3, Table-3 (i)(Mercury (as Hg))	-	0	-
Cl-5.3, Table-3 (ii)(Cadmium (as Cd))	-	0	-
Cl-5.3, Table-3 (iii)(Arsenic (as As))	-	0	-
Cl-5.3, Table-3 (iv)(Cyanide (as CN))	-	0	-
Cl-5.3, Table-3 (v)(Lead (as Pb))	-	0	-
Cl-5.3, Table-3 (vi)(Chromium (as Cr))	-	0	-
Cl-5.3, Table-3 (viii)(Polychlorinated biphenyl (PCB))	-	0	-
Cl-5.3, Table-3 (ix)(Polynuclear aromatic hydrocarbons)	-	0	-
Cl-5.3, Table-3 (x)(Uranium)	-	0	-
Cl-5.3, Table-4 (i)(Alpha emitters, Becquerel (Bq/l))	-	0	-
Cl-5.3, Table-4 (ii)(Beta emitters, Becquerel (Bq/l),)	-	0	-
Cl-5.4 (i)(Pesticide residues considered individually)	-	0	-
Cl-5.4 (ii)(Total pesticide residue)	-	0	-
Cl-5.2.3(Faecal streptococci)	-	0	-
Cl-5.2.8(shigella)	-	0	-
Cl-5.2.9(V.parahaemolyticus)	-	0	-
5.4/Annex D/i(P,P-DDD)	-	0	-
5.4/Annex D/i(O,P-DDT)	-	0	-
5.4/Annex D/viii(Phorate)	-	0	-
5.4/Annex D/xxviii(Malaoxon)	-	0	-
Cl-5.2.3(Staphylococcus aureus)	-	0	-
Cl-5.3, Table-2 (xvii)(Sodium (as Na))	-	0	-
Cl-5.3, Table-2 (xxii)(Sulphide)	-	0	-
Cl-5.3, Table-3 (vii)(Nickel (as Ni))	-	0	-

31 Dec, 2026

-
Included w.e.f. 26.09.2024 Exclusion: Cl.5.3 Table-4 (i) Alpha Emitters, Cl.5.3 Table-4 (ii) Beta Emitters

7019

Elutech Laboratory and Calibration Services, Jaipur

9179806

IS 303 (1989)

Plywood for General Purposes -

Grade - MR & BWR, Type – AA, AB & BB

5200 View breakup
Testing charges (excluding raw material) for BMR grade Rs. 4800/-, MR grade Rs. 5200/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-	5200	Testing Charges (excluding raw material) for BWR Grade Rs 4800, MR Grade Rs 5200.
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-	5200	-
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-	5200	-
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-	5200	-
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-	5200	-
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-	5200	-
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	5200	-
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	5200	-
11.2.2(Glue Adhesion - Mycological test - 11.2.2, Part 7 of IS 1734 [for MR Garde only])	-	5200	-
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for MR Grade])	-	5200	-
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for BWR Grade])	-	5200	-
11.3(Moisture Content - Part 1 of IS 1734)	-	5200	-
8(Dimensions & Tolerances - Edge Straightness - Annexure C)	-	5200	-
8(Dimensions & Tolerances - Squareness - Annexure C)	-	5200	-
8(Dimensions & Tolerances - Thickness - Cl. 8)	-	5200	-
8(Dimensions & Tolerances - Width - Cl. 8)	-	5200	-
8(Dimensions & Tolerances - Length - Cl. 8)	-	5200	-
9(Workmanship and Finish - Cl.9, 8.3, Annexure C)	-	5200	-
9(Workmanship and Finish - Cl.9, 8.3, Annexure C)	-	5200	-
5.2, Table 1, Table 2(Quality Requirements - Cl. 5.2)	-	5200	-
5.1(Type - For BB Type)	-	5200	-
5.1(Type - For AB Type)	-	5200	-
5.1(Type - For AA Type)	-	5200	-
4(Grade - For MR grade)	-	5200	-
4(Grade - For BWR grade)	-	5200	-
cl. 13.1(marking)	-	5200	-
cl. 13.2(marking)	-	5200	-
Cl-12 (Amendment No-2 OF IS 303)(OPTIONAL REQUIREMENT FOR ECO MARK)	-	5200	-
cl. 13.1(marking)	-	0	-
cl. 13.2(marking)	-	0	-
Cl-12 (Amendment No-2 OF IS 303)(OPTIONAL REQUIREMENT FOR ECO MARK)	-	0	-
cl. 13.1(marking)	-	0	-
cl. 13.2(marking)	-	0	-
Cl-12 (Amendment No-2 OF IS 303)(OPTIONAL REQUIREMENT FOR ECO MARK)	-	0	-
cl. 13.1(marking)	-	0	-
cl. 13.2(marking)	-	0	-
Cl-12 (Amendment No-2 OF IS 303)(OPTIONAL REQUIREMENT FOR ECO MARK)	-	0	-
CL-6.2(Adhesive)	-	5200	-
CL-7.2.3(Grain Direction)	-	5200	-
CL-7.2.1(Thickness)	-	5200	-
CL-7.2.5.1(Gaps in cores and cross-bands)	-	5200	-
CL-8.2(Thickness)	-	5200	-

26 Aug, 2027

-
Included w.e.f. 19.09.2024

7020

MSME TESTING STATION, HYDERABAD

6181104

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

Grade: Fe 415,to 600D, Sizes: up to and including 25mm

14500 View breakup
-

Clause No.	Exclusion	Remark
Cl 9.4(Load In Other Direction From Bend)	-	-
Cl 9.3(Load In One Direction)	-	-
Cl 7.2(Weight)	-	-
Cl 6.1(Length, Width & Thickness)	-	-
Cl 5(Deformations and Surface Characteristics)	-	-
Cl 9.4(Load In Other Direction From Bend)	-	-
Cl 9.3(Load In One Direction)	-	-
Cl 7.2(Weight)	-	-
Cl 6.1(Length, Width & Thickness)	-	-
Cl 5(Deformations and Surface Characteristics)	-	-
Cl 9.4(Load In Other Direction From Bend)	-	-
Cl 9.3(Load In One Direction)	-	-
Cl 8.1(UTM)	-	-
Cl 7.2(Weight)	-	-
Cl 6.1(Length, Width & Thickness)	-	-
Cl 5(Deformations and Surface Characteristics)	-	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON +EQUIVELENT )	-	-
4.1(Sulphur and phosphorous)	-	-
4.1(CE)	-	-
4.1(Ni)	-	-
4.1(Mo)	-	-
4.1(Cr)	-	-
4.1( Ti)	-	-
4.1(V)	-	-
4.1( Nb)	-	-
4.1( Aluminium %)	-	-
4.1( Copper %)	-	-
4.1(Silicon %)	-	-
4.1(Sulphur %)	-	-
4.1(Phosphorus %)	-	-
4.1(Manganese %)	-	-
4.1(Carbon %)	-	-
Cl.9.4 & Cl. 9.4.1(Rebend test)	-	-
Cl. 9.3, Table 4(Bend Test )	-	-
Cl. 8.1 Table 3(Elongation, percentage)	-	-
Cl. 8.1 Table 3(TS/YS ratio)	-	-
Cl. 8.1 Table 3(Tensile Strength (TS))	-	-
Cl. 8.1 Table 3(Yield Stress (YS))	-	-
Cl. 7.2 Table -2 (Nominal Mass)	-	-
Cl. 6.1(Nominal Size)	-	-
Cl. 5 (Cl. 5 - Mean projected area of transverse ribs (1/3 of Ar))	-	-
Cl. 5 (Cl.5 Mean area of ribs/unit length (Ar), )	-	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR+PHOSPHUR)	-	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 MANGANESE)	-	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 NITROGEN)	-	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 PHOSPHURS)	-	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR)	-	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON )	-	-
Cl.4.2 of IS 1786 (Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-
Cl.4.2 of IS 1786 (Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-
Cl.4.2 of IS 1786 (Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-
Cl.4.2 of IS 1786 (Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-
Cl.4.2 of IS 1786 (Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-
Cl.4.2 of IS 1786 (Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-
Cl.4.2 of IS 1786 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-
Cl.4.2 of IS 1786 (Grade:- Fe 415D,Fe 415S, Fe 500D,Fe 500S,Fe 550D)(Carbon Equivalent)	-	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Sulphur & Phosphorous)	-	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Phosphorous- IS 228)	-	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Sulphur-IS 228)	-	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Carbon-IS 228)	-	-
8.18.1 Table 3(Total elongation at maximum force)	-	-
Cl 5(Deformations and Surface Characteristics)	-	-
4.2(Niobium (Nb))	-	-
4.2(Boron (B))	-	-
Cl. 8.1 Table 3(TS/YS Ratio)	-	-
Cl. 5.3 (b)(The ribs contributing the projected area - Transverse Ribs)	-	-
Cl. 5.3 (a)(The ribs contributing the projected area - Longitudinal Ribs)	-	-
Cl. 8.1 Table 3(Maximum Extension)	-	-
Cl. 8.1 Table 3(Total Elongation at Maximum Force)	-	-
Cl. 6.2, 6.3 Table 1(Gross Cross Sectional Area, A)	-	-
Cl. 4.3(Visual Inspection.)	-	-
Cl. 5.2(Surface Characteristics)	-	-
Clause 9.4(Rebend Test)	-	-
Clause 6.3(Effective Cross-sectional Area)	-	-
Clause 8.1(Table 3)(Total Elongation at Maximum Force)	-	-
Cl 9.4(Load In Other Direction From Bend)	-	-
Cl 9.3(Load In One Direction)	-	-
Cl 8.1(UTM)	-	-
Cl 7.2(Weight)	-	-
Cl 6.1(Length, Width & Thickness)	-	-
Cl 5(Deformations and Surface Characteristics)	-	-
Cl 5(Deformations and Surface Characteristics)	-	-
Cl 6.1(Length, Width & Thickness)	-	-
Cl 7.2(Weight)	-	-
Cl 8.1(UTM)	-	-
Cl 9.3(Load In One Direction)	-	-
Cl 9.4(Load In Other Direction From Bend)	-	-
7.0 & 7.1(Specified lengths - SOP MT-23)	-	-
8.0 & 8.1("Total elongation at maximum force on 5.65 vSo mm GL. ")	-	-
4.3(Rolling and cold working of bars/wire)	-	-
7.1(Specified length)	-	-
9.1(Preparation of test sample)	-	-
9.2(Tensile test,IS:1608(Pt1)-2018)	-	-
9.5(Retest)	-	-
Clause 4.2 Note 2, Amendment 1 & 3(Nb+V+B+Ti)	-	-
Clause 4.2 Note 3, Amendment 1 & 3(Cr+Cu+Ni+Mo+P)	-	-
Clause 4.2, Amendment 3 Note 4("In order to ascertain whether sufficient quantities of nitrogen binding elements are present, following formula may be used, where all elements are in ppm. (N−120)< (Al free/10)+((Ti+V)/7)+(Nb/14)")	-	-
4.1( Nitrogen%)	-	-
13(Identification and marking)	-	-
12(Inspection)	-	-
1()	-	-

17 Oct, 2027

-
Excluding Pull-Out Test.

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number